ZYXEL-VDSLLINE-MIB
138 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter Gauge TimeTicks |
| RFC1213-MIB | DisplayString |
| SNMPv2-TC | RowStatus |
| ZYXEL-MIB | vesSeriesCommon |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.890.1.5.12.1.1 | NodeaccessSwitchVdslLineMib | |||
| 1.3.6.1.4.1.890.1.5.12.1.1.1 | NodeaccessSwitchVdslLineMibObjects | |||
| 1.3.6.1.4.1.890.1.5.12.1.1.1.1 | TableaccessSwitchVdslLineTable | not-accessible | mandatory | This table includes common attributes describing both ends of the line. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.1.1 | RowaccessSwitchVdslLineEntry | not-accessible | mandatory | An entry in the accessSwitchVdslLineTable. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.1.1.1 | ColumnaccessSwitchVdslLineCoding | read-only | mandatory | Specifies the VDSL coding type used on this line. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.1.1.2 | ColumnaccessSwitchVdslLineDiscCount | read-only | mandatory | Count of the number of disconnection failures since agent reset. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.1.1.3 | ColumnaccessSwitchVdslLineConfProfile | read-write | mandatory | The value of this object identifies the row in the VDSL Line Configuration Profile Table, (accessSwitchVdslLineConfProfileTable), which applies for this VDSL l… |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.2 | TableaccessSwitchVdslVtuoPhysTable | not-accessible | mandatory | This table provides one row for each VTU-O. Each row contains the physical layer parameters for that VTU-O. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.2.1 | RowaccessSwitchVdslVtuoPhysEntry | not-accessible | mandatory | An entry in the accessSwitchVdslVtuoPhysTable. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.1 | ColumnaccessSwitchVdslVtuoCurrSnrMgn | read-only | mandatory | Noise Margin as seen by this VTU with respect to its received signal in 0.01dB. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.2 | ColumnaccessSwitchVdslVtuoCurrMse | read-only | mandatory | Minimum Square Error as seen by this VTU with respect to its received signal in 0.01dB. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.3 | ColumnaccessSwitchVdslVtuoCurrPsd | read-only | mandatory | Power Spectral Density as seen by this VTU with respect to its received signal in 0.01dBm/Hz. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.4 | ColumnaccessSwitchVdslVtuoCurrRsErr | read-only | mandatory | Reed-Solomon error counted by this VTU with respect to its received signal. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.5 | ColumnaccessSwitchVdslVtuoCurrAtn | read-only | mandatory | Measured difference in the total power transmitted by the peer VTU and the total power received by this VTU. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.6 | ColumnaccessSwitchVdslVtuoCurrOutputPwr | read-only | mandatory | Measured total output power in 0.01dBm transmitted by this VTU. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.7 | ColumnaccessSwitchVdslVtuoCurrRate | read-only | mandatory | Actual transmission rate in bits-per-second on this line. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.8 | ColumnaccessSwitchVdslVtuoCurrAttainableRate | read-only | mandatory | Indicates the maximum mandatoryly attainable data rate in bits-per-second by the VTU. This value will be equal or greater than the mandatory line rate. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.9 | ColumnaccessSwitchVdslVtuoCurrStatus | read-only | mandatory | Indicates mandatory state of the VTU-O line. This is a bit-map of possible conditions. The various bit positions are: 0 noDefect There no defects on the line 1… |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.3 | TableaccessSwitchVdslVturPhysTable | not-accessible | mandatory | This table provides one row for each VTU-R. Each row contains the physical layer parameters for that VTU-R. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.3.1 | RowaccessSwitchVdslVturPhysEntry | not-accessible | mandatory | An entry in the accessSwitchVdslVturPhysTable. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.1 | ColumnaccessSwitchVdslVturCurrSnrMgn | read-only | mandatory | Noise Margin as seen by this VTU with respect to its received signal in 0.01dB. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.2 | ColumnaccessSwitchVdslVturCurrMse | read-only | mandatory | Minimum Square Error as seen by this VTU with respect to its received signal in 0.01dB. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.3 | ColumnaccessSwitchVdslVturCurrPsd | read-only | mandatory | Power Spectral Density as seen by this VTU with respect to its received signal in 0.01dBm/Hz. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.4 | ColumnaccessSwitchVdslVturCurrRsErr | read-only | mandatory | Reed-Solomon error counted by this VTU with respect to its received signal. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.5 | ColumnaccessSwitchVdslVturCurrAtn | read-only | mandatory | Measured difference in the total power transmitted by the peer VTU and the total power received by this VTU. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.6 | ColumnaccessSwitchVdslVturCurrOutputPwr | read-only | mandatory | Measured total output power in 0.01dBm transmitted by this VTU. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.7 | ColumnaccessSwitchVdslVturCurrRate | read-only | mandatory | Actual transmission rate in bits-per-second on this line. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.8 | ColumnaccessSwitchVdslVturCurrAttainableRate | read-only | mandatory | Indicates the maximum mandatoryly attainable data rate in bits-per-second by the VTU. This value will be equal or greater than the mandatory line rate. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.9 | ColumnaccessSwitchVdslVturCurrStatus | read-only | mandatory | Indicates mandatory state of the VTU-R line. This is a bit-map of possible conditions. The various bit positions are: 0 noDefect There no defects on the line 1… |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.4 | TableaccessSwitchVdslVtuoInventoryTable | not-accessible | mandatory | This table provides one row for each VTU-O. Each row contains the inventory parameters for that VTU-O. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.4.1 | RowaccessSwitchVdslVtuoInventoryEntry | not-accessible | mandatory | An entry in the accessSwitchVdslVtuoInventoryTable. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.4.1.1 | ColumnaccessSwitchVdslVtuoInvSerialNumber | read-only | mandatory | The vendor specific string that identifies the vendor equipment. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.4.1.2 | ColumnaccessSwitchVdslVtuoInvVendorID | read-only | mandatory | The vendor ID code is a copy of the binary vendor identification field defined by the PHY[10] and expressed as readable characters. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.4.1.3 | ColumnaccessSwitchVdslVtuoInvVersionNumber | read-only | mandatory | The vendor specific version number sent by this VTU as part of the initialization messages. It is a copy of the binary version number field defined by the PHY[… |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.5 | TableaccessSwitchVdslVturInventoryTable | not-accessible | mandatory | This table provides one row for each VTU-R. Each row contains the inventory parameters for that VTU-R. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.5.1 | RowaccessSwitchVdslVturInventoryEntry | not-accessible | mandatory | An entry in the accessSwitchVdslVturInventoryTable. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.5.1.1 | ColumnaccessSwitchVdslVturInvSerialNumber | read-only | mandatory | The vendor specific string that identifies the vendor equipment. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.5.1.2 | ColumnaccessSwitchVdslVturInvVendorID | read-only | mandatory | The vendor ID code is a copy of the binary vendor identification field defined by the PHY[10] and expressed as readable characters. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.5.1.3 | ColumnaccessSwitchVdslVturInvVersionNumber | read-only | mandatory | The vendor specific version number sent by this VTU as part of the initialization messages. It is a copy of the binary version number field defined by the PHY[… |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.6 | TableaccessSwitchVdslVtuoPerfDataTable | not-accessible | mandatory | This table provides one row for each VTU-O. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.6.1 | RowaccessSwitchVdslVtuoPerfDataEntry | not-accessible | mandatory | An entry in accessSwitchVdslVtuoPerfDataTable. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.1 | ColumnaccessSwitchVdslVtuoPerfLofs | read-only | mandatory | Count of the number of Loss of Framing failures since agent reset. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.2 | ColumnaccessSwitchVdslVtuoPerfLoss | read-only | mandatory | Count of the number of Loss of Signal failures since agent reset. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.3 | ColumnaccessSwitchVdslVtuoPerfLols | read-only | mandatory | Count of the number of Loss of Link failures since agent reset. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.4 | ColumnaccessSwitchVdslVtuoPerfLprs | read-only | mandatory | Count of the number of Loss of Power failures since agent reset. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.5 | ColumnaccessSwitchVdslVtuoPerfESs | read-only | mandatory | Count of the number of Errored Seconds since agent reset. The errored second parameter is a count of one-second intervals containing one or more crc anomalies,… |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.6 | ColumnaccessSwitchVdslVtuoPerfInits | read-only | mandatory | Count of the line initialization attempts since agent reset. Includes both successful and failed attempts. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.7 | ColumnaccessSwitchVdslVtuoPerfValidIntervals | read-only | mandatory | The number of previous 15-minute intervals in the interval table for which data was collected. Given that <n> is the maximum # of intervals supported. The valu… |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.8 | ColumnaccessSwitchVdslVtuoPerfInvalidIntervals | read-only | mandatory | The number of intervals in the range from 0 to the value of accessSwitchVdslVtuoPerfValidIntervals for which no data is available. This object will typically b… |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.9 | ColumnaccessSwitchVdslVtuoPerfCurr15MinTimeElapsed | read-only | mandatory | Total elapsed seconds in this interval. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.10 | ColumnaccessSwitchVdslVtuoPerfCurr15MinLofs | read-only | mandatory | Count of seconds in the mandatory 15 minute interval when there was Loss of Framing. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.11 | ColumnaccessSwitchVdslVtuoPerfCurr15MinLoss | read-only | mandatory | Count of seconds in the mandatory 15 minute interval when there was Loss of Signal. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.12 | ColumnaccessSwitchVdslVtuoPerfCurr15MinLols | read-only | mandatory | Count of seconds in the mandatory 15 minute interval when there was Loss of Link. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.13 | ColumnaccessSwitchVdslVtuoPerfCurr15MinLprs | read-only | mandatory | Count of seconds in the mandatory 15 minute interval when there was Loss of Power. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.14 | ColumnaccessSwitchVdslVtuoPerfCurr15MinESs | read-only | mandatory | Count of Errored Seconds in the mandatory 15 minute interval. The errored second parameter is a count of one-second intervals containing one or more crc anomal… |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.15 | ColumnaccessSwitchVdslVtuoPerfCurr15MinInits | read-only | mandatory | Count of the line initialization attempts in the mandatory 15 minute interval. Includes both successful and failed attempts. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.16 | ColumnaccessSwitchVdslVtuoPerfCurr1DayTimeElapsed | read-only | mandatory | Number of seconds that have elapsed since the beginning of the mandatory 1-day interval. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.17 | ColumnaccessSwitchVdslVtuoPerfCurr1DayLofs | read-only | mandatory | Count of the number of seconds when there was Loss of Framing during the mandatory day as measured by accessSwitchVdslVtuoPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.18 | ColumnaccessSwitchVdslVtuoPerfCurr1DayLoss | read-only | mandatory | Count of the number of seconds when there was Loss of Signal during the mandatory day as measured by accessSwitchVdslVtuoPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.19 | ColumnaccessSwitchVdslVtuoPerfCurr1DayLols | read-only | mandatory | Count of the number of seconds when there was Loss of Link during the mandatory day as measured by accessSwitchVdslVtuoPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.20 | ColumnaccessSwitchVdslVtuoPerfCurr1DayLprs | read-only | mandatory | Count of the number of seconds when there was Loss of Power during the mandatory day as measured by accessSwitchVdslVtuoPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.21 | ColumnaccessSwitchVdslVtuoPerfCurr1DayESs | read-only | mandatory | Count of Errored Seconds during the mandatory day as measured by accessSwitchVdslVtuoPerfCurr1DayTimeElapsed. The errored second parameter is a count of one-se… |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.22 | ColumnaccessSwitchVdslVtuoPerfCurr1DayInits | read-only | mandatory | Count of the line initialization attempts in the day as measured by accessSwitchVdslVtuoPerfCurr1DayTimeElapsed. Includes both successful and failed attempts. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.23 | ColumnaccessSwitchVdslVtuoPerfPrev1DayMoniSecs | read-only | mandatory | The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the int… |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.24 | ColumnaccessSwitchVdslVtuoPerfPrev1DayLofs | read-only | mandatory | Count of seconds in the interval when there was Loss of Framing within the most recent previous 1-day period. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.25 | ColumnaccessSwitchVdslVtuoPerfPrev1DayLoss | read-only | mandatory | Count of seconds in the interval when there was Loss of Signal within the most recent previous 1-day period. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.26 | ColumnaccessSwitchVdslVtuoPerfPrev1DayLols | read-only | mandatory | Count of seconds in the interval when there was Loss of Link within the most recent previous 1-day period. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.27 | ColumnaccessSwitchVdslVtuoPerfPrev1DayLprs | read-only | mandatory | Count of seconds in the interval when there was Loss of Power within the most recent previous 1-day period. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.28 | ColumnaccessSwitchVdslVtuoPerfPrev1DayESs | read-only | mandatory | Count of Errored Seconds within the most recent previous 1-day period. The errored second parameter is a count of one-second intervals containing one or more c… |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.29 | ColumnaccessSwitchVdslVtuoPerfPrev1DayInits | read-only | mandatory | Count of the line initialization attempts in the most recent previous 1-day period. Includes both successful and failed attempts. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.7 | TableaccessSwitchVdslVturPerfDataTable | not-accessible | mandatory | This table provides one row for each VTU-R. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.7.1 | RowaccessSwitchVdslVturPerfDataEntry | not-accessible | mandatory | An entry in accessSwitchVdslVturPerfDataTable. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.1 | ColumnaccessSwitchVdslVturPerfLofs | read-only | mandatory | Count of the number of Loss of Framing failures since agent reset. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.2 | ColumnaccessSwitchVdslVturPerfLoss | read-only | mandatory | Count of the number of Loss of Signal failures since agent reset. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.3 | ColumnaccessSwitchVdslVturPerfLprs | read-only | mandatory | Count of the number of Loss of Power failures since agent reset. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.4 | ColumnaccessSwitchVdslVturPerfESs | read-only | mandatory | Count of the number of Errored Seconds since agent reset. The errored second parameter is a count of one-second intervals containing one or more crc anomalies,… |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.5 | ColumnaccessSwitchVdslVturPerfValidIntervals | read-only | mandatory | The number of previous 15-minute intervals in the interval table for which data was collected. Given that <n> is the maximum # of intervals supported. The valu… |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.6 | ColumnaccessSwitchVdslVturPerfInvalidIntervals | read-only | mandatory | The number of intervals in the range from 0 to the value of accessSwitchVdslVturPerfValidIntervals for which no data is available. This object will typically b… |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.7 | ColumnaccessSwitchVdslVturPerfCurr15MinTimeElapsed | read-only | mandatory | Total elapsed seconds in this interval. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.8 | ColumnaccessSwitchVdslVturPerfCurr15MinLofs | read-only | mandatory | Count of seconds in the mandatory 15 minute interval when there was Loss of Framing. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.9 | ColumnaccessSwitchVdslVturPerfCurr15MinLoss | read-only | mandatory | Count of seconds in the mandatory 15 minute interval when there was Loss of Signal. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.10 | ColumnaccessSwitchVdslVturPerfCurr15MinLprs | read-only | mandatory | Count of seconds in the mandatory 15 minute interval when there was Loss of Power. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.11 | ColumnaccessSwitchVdslVturPerfCurr15MinESs | read-only | mandatory | Count of Errored Seconds in the mandatory 15 minute interval. The errored second parameter is a count of one-second intervals containing one or more crc anomal… |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.12 | ColumnaccessSwitchVdslVturPerfCurr1DayTimeElapsed | read-only | mandatory | Number of seconds that have elapsed since the beginning of the mandatory 1-day interval. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.13 | ColumnaccessSwitchVdslVturPerfCurr1DayLofs | read-only | mandatory | Count of the number of seconds when there was Loss of Framing during the mandatory day as measured by accessSwitchVdslVturPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.14 | ColumnaccessSwitchVdslVturPerfCurr1DayLoss | read-only | mandatory | Count of the number of seconds when there was Loss of Signal during the mandatory day as measured by accessSwitchVdslVturPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.15 | ColumnaccessSwitchVdslVturPerfCurr1DayLprs | read-only | mandatory | Count of the number of seconds when there was Loss of Power during the mandatory day as measured by accessSwitchVdslVturPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.16 | ColumnaccessSwitchVdslVturPerfCurr1DayESs | read-only | mandatory | Count of Errored Seconds during the mandatory day as measured by accessSwitchVdslVturPerfCurr1DayTimeElapsed. The errored second parameter is a count of one-se… |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.17 | ColumnaccessSwitchVdslVturPerfPrev1DayMoniSecs | read-only | mandatory | The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the int… |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.18 | ColumnaccessSwitchVdslVturPerfPrev1DayLofs | read-only | mandatory | Count of seconds in the interval when there was Loss of Framing within the most recent previous 1-day period. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.19 | ColumnaccessSwitchVdslVturPerfPrev1DayLoss | read-only | mandatory | Count of seconds in the interval when there was Loss of Signal within the most recent previous 1-day period. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.20 | ColumnaccessSwitchVdslVturPerfPrev1DayLprs | read-only | mandatory | Count of seconds in the interval when there was Loss of Power within the most recent previous 1-day period. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.21 | ColumnaccessSwitchVdslVturPerfPrev1DayESs | read-only | mandatory | Count of Errored Seconds within the most recent previous 1-day period. The errored second parameter is a count of one-second intervals containing one or more c… |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.8 | TableaccessSwitchVdslVtuoIntervalTable | not-accessible | mandatory | This table provides one row for each VTU-O performance data collection interval. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.8.1 | RowaccessSwitchVdslVtuoIntervalEntry | not-accessible | mandatory | An entry in the accessSwitchVdslVtuoIntervalTable. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.1 | ColumnaccessSwitchVdslVtuoIntervalNumber | not-accessible | mandatory | Performance Data Interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.2 | ColumnaccessSwitchVdslVtuoIntervalLofs | read-only | mandatory | Count of seconds in the interval when there was Loss of Framing. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.3 | ColumnaccessSwitchVdslVtuoIntervalLoss | read-only | mandatory | Count of seconds in the interval when there was Loss of Signal. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.4 | ColumnaccessSwitchVdslVtuoIntervalLols | read-only | mandatory | Count of seconds in the interval when there was Loss of Link. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.5 | ColumnaccessSwitchVdslVtuoIntervalLprs | read-only | mandatory | Count of seconds in the interval when there was Loss of Power. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.6 | ColumnaccessSwitchVdslVtuoIntervalESs | read-only | mandatory | Count of Errored Seconds in the interval. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more … |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.7 | ColumnaccessSwitchVdslVtuoIntervalInits | read-only | mandatory | Count of the line initialization attempts during the interval. Includes both successful and failed attempts. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.8 | ColumnaccessSwitchVdslVtuoIntervalValidData | read-only | mandatory | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.9 | TableaccessSwitchVdslVturIntervalTable | not-accessible | mandatory | This table provides one row for each VTU-R performance data collection interval. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.9.1 | RowaccessSwitchVdslVturIntervalEntry | not-accessible | mandatory | An entry in the accessSwitchVdslVturIntervalTable. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.9.1.1 | ColumnaccessSwitchVdslVturIntervalNumber | not-accessible | mandatory | Performance Data Interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.9.1.2 | ColumnaccessSwitchVdslVturIntervalLofs | read-only | mandatory | Count of seconds in the interval when there was Loss of Framing. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.9.1.3 | ColumnaccessSwitchVdslVturIntervalLoss | read-only | mandatory | Count of seconds in the interval when there was Loss of Signal. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.9.1.4 | ColumnaccessSwitchVdslVturIntervalLprs | read-only | mandatory | Count of seconds in the interval when there was Loss of Power. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.9.1.5 | ColumnaccessSwitchVdslVturIntervalESs | read-only | mandatory | Count of Errored Seconds in the interval. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more … |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.9.1.6 | ColumnaccessSwitchVdslVturIntervalValidData | read-only | mandatory | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.10 | TableaccessSwitchVdslLineConfProfileTable | not-accessible | mandatory | This table contains information on the VDSL line configuration. One entry in this table reflects a profile which can be used to configure the VDSL line. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.10.1 | RowaccessSwitchVdslLineConfProfileEntry | not-accessible | mandatory | Each entry consists of a list of parameters that represents the configuration of an VDSL modem. When `dynamic' profiles are implemented, a default profile will… |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.1 | ColumnaccessSwitchVdslLineConfProfileName | not-accessible | mandatory | This object is used by the line configuration table in order to identify a row of this table. When `dynamic' profiles are implemented, the profile name is user… |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.2 | ColumnaccessSwitchVdslLineConfMode | read-create | mandatory | Specifies the VDSL mode type used on this line. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.3 | ColumnaccessSwitchVdslVtuoConfRate | read-create | mandatory | Transmission rate in bits-per-second specified by this VTU. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.4 | ColumnaccessSwitchVdslVtuoConfTargetSnrMgn | read-create | mandatory | Configured Target Signal/Noise Margin in 0.01dB. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initiali… |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.5 | ColumnaccessSwitchVdslVtuoConfMaxSnrMgn | read-create | mandatory | Configured Maximum acceptable Signal/Noise Margin in 0.01dB. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize … |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.6 | ColumnaccessSwitchVdslVtuoConfMinSnrMgn | read-create | mandatory | Configured Minimum acceptable Signal/Noise Margin in 0.01dB. If the noise margin falls below this level, the modem should attempt to increase its power output.… |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.7 | ColumnaccessSwitchVdslVturConfRate | read-create | mandatory | Transmission rate in bits-per-second specified by this VTU. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.8 | ColumnaccessSwitchVdslVturConfTargetSnrMgn | read-create | mandatory | Configured Target Signal/Noise Margin in 0.01dB. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initiali… |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.9 | ColumnaccessSwitchVdslVturConfMaxSnrMgn | read-create | mandatory | Configured Maximum acceptable Signal/Noise Margin in 0.01dB. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize … |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.10 | ColumnaccessSwitchVdslVturConfMinSnrMgn | read-create | mandatory | Configured Minimum acceptable Signal/Noise Margin in 0.01dB. If the noise margin falls below this level, the modem should attempt to increase its power output.… |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.11 | ColumnaccessSwitchVdslLineConfProfileRowStatus | read-create | mandatory | This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to `active'. When `active… |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.11 | ScalarvesMaxNumOfProfiles | read-only | mandatory | The maximum number of VDSL profiles which the system supports. |
| 1.3.6.1.4.1.890.1.5.12.1.1.2 | NodeaccessSwitchVdslLCSMib | |||
| 1.3.6.1.4.1.890.1.5.12.1.1.2.1 | NodeaccessSwitchVdslLCSMibObjects | |||
| 1.3.6.1.4.1.890.1.5.12.1.1.2.2 | NodeaccessSwitchVdslLCSQam | |||
| 1.3.6.1.4.1.890.1.5.12.1.1.2.2.1 | TableaccessSwitchVdslVtuoQamTable | not-accessible | mandatory | This table provides one row for each VTU-O if QAM is used. Each row contains the modulation parameters for that VTU-O. |
| 1.3.6.1.4.1.890.1.5.12.1.1.2.2.1.1 | RowaccessSwitchVdslVtuoQamEntry | not-accessible | mandatory | An entry in the accessSwitchVdslVtuoQamTable. |
| 1.3.6.1.4.1.890.1.5.12.1.1.2.2.1.1.1 | ColumnaccessSwitchVdslVtuoQamConstellation | read-only | mandatory | Modulation method used by this VTU. |
| 1.3.6.1.4.1.890.1.5.12.1.1.2.2.1.1.2 | ColumnaccessSwitchVdslVtuoQamInterpolation | read-only | mandatory | Modulation speed used by this VTU. |
| 1.3.6.1.4.1.890.1.5.12.1.1.2.2.1.1.3 | ColumnaccessSwitchVdslVtuoQamFc | read-only | mandatory | Carrier frequency in Hz used by this ATU. |
| 1.3.6.1.4.1.890.1.5.12.1.1.2.2.2 | TableaccessSwitchVdslVturQamTable | not-accessible | mandatory | This table provides one row for each VTU-R if QAM is used. Each row contains the modulation parameters for that VTU-R. |
| 1.3.6.1.4.1.890.1.5.12.1.1.2.2.2.1 | RowaccessSwitchVdslVturQamEntry | not-accessible | mandatory | An entry in the accessSwitchVdslVturQamTable. |
| 1.3.6.1.4.1.890.1.5.12.1.1.2.2.2.1.1 | ColumnaccessSwitchVdslVturQamConstellation | read-only | mandatory | Modulation method used by this VTU. |
| 1.3.6.1.4.1.890.1.5.12.1.1.2.2.2.1.2 | ColumnaccessSwitchVdslVturQamInterpolation | read-only | mandatory | Modulation speed used by this VTU. |
| 1.3.6.1.4.1.890.1.5.12.1.1.2.2.2.1.3 | ColumnaccessSwitchVdslVturQamFc | read-only | mandatory | Carrier frequency in Hz used by this ATU. |