MIB Viewer

ZYXEL-VES1608FE53A-MIB

758 objects
ZyXEL Private MIB
Imported Objects
BRIDGE-MIBBridgeId dot1dBasePort MacAddress Timeout
P-BRIDGE-MIBdot1dTrafficClass
Q-BRIDGE-MIBdot1qVlanIndex PortList VlanIndex
RFC1155-SMIenterprises
RFC1213-MIBDisplayString ifIndex PhysAddress
SNMPv2-SMICounter32 Counter64 Gauge32 IpAddress NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32
SNMPv2-TCRowStatus TEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.4.1.890Nodezyxel
1.3.6.1.4.1.890.1Nodeproducts
1.3.6.1.4.1.890.1.5NodeaccessSwitch
1.3.6.1.4.1.890.1.5.12NodevesSeries
1.3.6.1.4.1.890.1.5.12.42Identityves1608fe53aZyXEL Private MIB
1.3.6.1.4.1.890.1.5.12.42.2Nodealarmconf
1.3.6.1.4.1.890.1.5.12.42.2.1ScalaralarmOpsread-writecurrentThe manager sets the corresponding bit value to 1 to start the operation and the agent clears the object to zero when the operation is successfully completed. …
1.3.6.1.4.1.890.1.5.12.42.2.2TablealarmConfTablenot-accessiblecurrentThis table includes alarm configuration.
1.3.6.1.4.1.890.1.5.12.42.2.2.1RowalarmConfEntrynot-accessiblecurrentAn entry in alarmConfTable.
1.3.6.1.4.1.890.1.5.12.42.2.2.1.1ColumnalarmConfIdread-onlycurrent5002:vdsl_tca_lol 5003:vdsl_tca_lof 5004:vdsl_tca_los 5005:vdsl_tca_lop 5006:vdsl_tca_es 5007:vdsl_tca_ses 5008:vdsl_tca_uas 10000:eqptVol_err 10001:eqptEqptte…
1.3.6.1.4.1.890.1.5.12.42.2.2.1.2ColumnalarmConfFacilityread-writecurrentAlarm facility.
1.3.6.1.4.1.890.1.5.12.42.2.2.1.3ColumnalarmConfTargetread-writecurrentThe destination which alarms are reported to. Set the bit to 1 to enable the target. BIT 1: snmp trap BIT 2: syslog
1.3.6.1.4.1.890.1.5.12.42.2.2.1.4ColumnalarmConfSeverityread-writecurrentAlarm severity
1.3.6.1.4.1.890.1.5.12.42.2.2.1.5ColumnalarmConfClearableread-writecurrentSetting the object to one indicates that the alarm is to be cleared when user submits alarm clear.
1.3.6.1.4.1.890.1.5.12.42.2.3TablealarmCurrTablenot-accessiblecurrentThis table includes current alarm information.
1.3.6.1.4.1.890.1.5.12.42.2.3.1RowalarmCurrEntrynot-accessiblecurrentAn entry in alarmCurrTable.
1.3.6.1.4.1.890.1.5.12.42.2.3.1.1ColumnalarmCurrIndexread-onlycurrentIndex of the alarm.
1.3.6.1.4.1.890.1.5.12.42.2.3.1.2ColumnalarmCurrOccurTimeread-onlycurrentAlarm occurence time (in hundredths of a second) since the system was last re-initialized.
1.3.6.1.4.1.890.1.5.12.42.2.3.1.3ColumnalarmCurrTrapOidread-onlycurrentTrap OID of the alarm.
1.3.6.1.4.1.890.1.5.12.42.2.3.1.4ColumnalarmCurrParam1read-onlycurrentThe 1st parameter of the alarm.
1.3.6.1.4.1.890.1.5.12.42.2.3.1.5ColumnalarmCurrParam2read-onlycurrentThe 2nd parameter of the alarm.
1.3.6.1.4.1.890.1.5.12.42.2.3.1.6ColumnalarmCurrParam3read-onlycurrentThe 3rd parameter of the alarm.
1.3.6.1.4.1.890.1.5.12.42.2.3.1.7ColumnalarmCurrParam4read-onlycurrentThe 4th parameter of the alarm.
1.3.6.1.4.1.890.1.5.12.42.2.3.1.8ColumnalarmCurrParam5read-onlycurrentThe 5th parameter of the alarm.
1.3.6.1.4.1.890.1.5.12.42.2.3.1.9ColumnalarmCurrParam6read-onlycurrentThe 6th parameter of the alarm.
1.3.6.1.4.1.890.1.5.12.42.2.3.1.10ColumnalarmCurrParam7read-onlycurrentThe 7th parameter of the alarm.
1.3.6.1.4.1.890.1.5.12.42.2.3.1.11ColumnalarmCurrParam8read-onlycurrentThe 8th parameter of the alarm.
1.3.6.1.4.1.890.1.5.12.42.2.3.1.12ColumnalarmCurrTimeDescrread-onlycurrentThe string representation of occurence time (YYYY/MM/DD HH:MM:SS).
1.3.6.1.4.1.890.1.5.12.42.2.3.1.13ColumnalarmCurrSeverityread-onlycurrentThe severity of the alarm.
1.3.6.1.4.1.890.1.5.12.42.2.3.1.14ColumnalarmCurrDescrread-onlycurrentThe description of the alarm.
1.3.6.1.4.1.890.1.5.12.42.2.4TablealarmSeverityPortTablenot-accessiblecurrentThis table includes the configuration of alarm reporting severity threshold for each port.
1.3.6.1.4.1.890.1.5.12.42.2.4.1RowalarmSeverityPortEntrynot-accessiblecurrentAn entry in alarmSeverityPortTable.
1.3.6.1.4.1.890.1.5.12.42.2.4.1.1ColumnseverityThreshread-writecurrentThe minimum alarm severity that is reported.
1.3.6.1.4.1.890.1.5.12.42.4Nodediagnostic
1.3.6.1.4.1.890.1.5.12.42.4.3Nodeselt
1.3.6.1.4.1.890.1.5.12.42.4.3.1ScalarseltTargetread-writecurrentIfIndex of the port which would be performed single end loopback test.
1.3.6.1.4.1.890.1.5.12.42.4.3.2ScalarseltOpsread-writecurrentThe manager sets the object to 1 to start the selt and the agent clears the object to zero when selt is successfully completed.
1.3.6.1.4.1.890.1.5.12.42.4.3.3ScalarseltStatusread-onlycurrentStatus description of the selt result.
1.3.6.1.4.1.890.1.5.12.42.4.3.4ScalarseltCableTyperead-onlycurrentThe cable type that selt result indicates.
1.3.6.1.4.1.890.1.5.12.42.4.3.5ScalarseltLoopEstimateLengthFtread-onlycurrentThe estimated loop length that selt result indicates.
1.3.6.1.4.1.890.1.5.12.42.4.3.6ScalarseltLoopEstimateLengthMeterread-onlycurrentThe estimated loop length that selt result indicates.
1.3.6.1.4.1.890.1.5.12.42.4.4Nodeldm
1.3.6.1.4.1.890.1.5.12.42.4.4.1ScalarldmTargetread-writecurrentIfIndex of the port which would be performed ldm test.
1.3.6.1.4.1.890.1.5.12.42.4.4.2ScalarldmOpsread-writecurrentThe manager sets the object to 1 to start the ldm test and the agent clears the object to zero when ldm test is successfully completed.
1.3.6.1.4.1.890.1.5.12.42.4.4.3ScalarldmStatusread-onlycurrentStatus description of ldm test result.
1.3.6.1.4.1.890.1.5.12.42.4.4.4ScalarldmXtucLoopAttenuationread-onlycurrentLoop Attenuation.
1.3.6.1.4.1.890.1.5.12.42.4.4.5ScalarldmXtucSignalAttenuationread-onlycurrentSignal Attenuation.
1.3.6.1.4.1.890.1.5.12.42.4.4.6ScalarldmXtucSignalMarginread-onlycurrentSignal Margin.
1.3.6.1.4.1.890.1.5.12.42.4.4.7ScalarldmXtucAggregateTxPowerread-onlycurrentActual Aggregate Transmit Power.
1.3.6.1.4.1.890.1.5.12.42.4.4.8ScalarldmXtucAttainableBitRateread-onlycurrentAttainable Bit Rate.
1.3.6.1.4.1.890.1.5.12.42.4.4.9ScalarldmXturLoopAttenuationread-onlycurrentLoop Attenuation.
1.3.6.1.4.1.890.1.5.12.42.4.4.10ScalarldmXturSignalAttenuationread-onlycurrentSignal Attenuation.
1.3.6.1.4.1.890.1.5.12.42.4.4.11ScalarldmXturSignalMarginread-onlycurrentSignal Margin.
1.3.6.1.4.1.890.1.5.12.42.4.4.12ScalarldmXturAggregateTxPowerread-onlycurrentActual Aggregate Transmit Power.
1.3.6.1.4.1.890.1.5.12.42.4.4.13ScalarldmXturAttainableBitRateread-onlycurrentAttainable Bit Rate.
1.3.6.1.4.1.890.1.5.12.42.4.4.14ScalarldmXtucNumOfSubcarriersPerPortread-onlycurrentThe number of subcarriers per port for ATU-C.
1.3.6.1.4.1.890.1.5.12.42.4.4.15ScalarldmXturNumOfSubcarriersPerPortread-onlycurrentThe number of subcarriers per port for ATU-R.
1.3.6.1.4.1.890.1.5.12.42.4.4.16ScalarldmXtucHlinScaleread-onlycurrentScale of Hlin.
1.3.6.1.4.1.890.1.5.12.42.4.4.17ScalarldmXtucHlinReal1read-onlycurrentThe object provides real part of Hlin for the first 256 subcarriers. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.890.1.5.12.42.4.4.18ScalarldmXtucHlinReal2read-onlycurrentThe object provides real part of Hlin for the last 256 subcarriers. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.890.1.5.12.42.4.4.19ScalarldmXtucHlinImage1read-onlycurrentThe object provides image part of Hlin for the first 256 subcarriers. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.890.1.5.12.42.4.4.20ScalarldmXtucHlinImage2read-onlycurrentThe object provides image part of Hlin for the last 256 subcarriers. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.890.1.5.12.42.4.4.21ScalarldmXtucHlog1read-onlycurrentThe object provides Hlog for the first 256 subcarriers. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.890.1.5.12.42.4.4.22ScalarldmXtucHlog2read-onlycurrentThe object provides Hlog for the last 256 subcarriers. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.890.1.5.12.42.4.4.23ScalarldmXtucQln1read-onlycurrentThe object provides QLN for the first 256 subcarriers. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.890.1.5.12.42.4.4.24ScalarldmXtucQln2read-onlycurrentThe object provides QLN for the last 256 subcarriers. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.890.1.5.12.42.4.4.25ScalarldmXtucSnr1read-onlycurrentThe object provides SNR for the first 256 subcarriers. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.890.1.5.12.42.4.4.26ScalarldmXtucSnr2read-onlycurrentThe object provides SNR for the last 256 subcarriers. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.890.1.5.12.42.4.4.27ScalarldmXturHlinScaleread-onlycurrentScale of Hlin.
1.3.6.1.4.1.890.1.5.12.42.4.4.28ScalarldmXturHlinRealread-onlycurrentReal part of Hlin. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.890.1.5.12.42.4.4.29ScalarldmXturHlinImageread-onlycurrentImage part of Hlin. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.890.1.5.12.42.4.4.30ScalarldmXturHlogread-onlycurrentHlog of subcarrier. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.890.1.5.12.42.4.4.31ScalarldmXturQlnread-onlycurrentQLN of subcarrier. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.890.1.5.12.42.4.4.32ScalarldmXturSnrread-onlycurrentSNR of subcarrier. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.890.1.5.12.42.5Nodeipconf
1.3.6.1.4.1.890.1.5.12.42.5.1NodestaticRoute
1.3.6.1.4.1.890.1.5.12.42.5.1.1ScalarmaxNumOfStaticRoutesread-onlycurrentThe maximum number of static routes supported by the system.
1.3.6.1.4.1.890.1.5.12.42.5.1.2TablestaticRouteTablenot-accessiblecurrentA table that contains information about static routes.
1.3.6.1.4.1.890.1.5.12.42.5.1.2.1RowstaticRouteEntrynot-accessiblecurrentA list of static route entry.
1.3.6.1.4.1.890.1.5.12.42.5.1.2.1.1ColumnstaticRouteNameread-onlycurrentThe name of the static route.
1.3.6.1.4.1.890.1.5.12.42.5.1.2.1.2ColumnstaticRouteDestread-createcurrentThe destination IP address of the static route.
1.3.6.1.4.1.890.1.5.12.42.5.1.2.1.3ColumnstaticRouteMaskread-createcurrentThe subnet mask of the static route.
1.3.6.1.4.1.890.1.5.12.42.5.1.2.1.4ColumnstaticRouteGatewayread-createcurrentThe gateway IP address of the static route.
1.3.6.1.4.1.890.1.5.12.42.5.1.2.1.5ColumnstaticRouteMetricread-createcurrentThe routing metric of the static route.
1.3.6.1.4.1.890.1.5.12.42.5.1.2.1.6ColumnstaticRouteRowStatusread-createcurrentThis object is used to create a new row or modify or delete an existing row in this table. A row is activated by setting this object to `active', , and is deac…
1.3.6.1.4.1.890.1.5.12.42.5.2NodeipSetup
1.3.6.1.4.1.890.1.5.12.42.5.2.1ScalarinbandIpread-writecurrent
1.3.6.1.4.1.890.1.5.12.42.5.2.2ScalarinbandIpSubnetMaskread-writecurrent
1.3.6.1.4.1.890.1.5.12.42.5.2.3ScalaroutbandIpread-writecurrent
1.3.6.1.4.1.890.1.5.12.42.5.2.4ScalaroutbandIpSubnetMaskread-writecurrent
1.3.6.1.4.1.890.1.5.12.42.5.2.5ScalardefaultGatewayIpread-writecurrent
1.3.6.1.4.1.890.1.5.12.42.7Nodemulticast
1.3.6.1.4.1.890.1.5.12.42.7.1ScalarigmpEnableread-writecurrentEnable/disable IGMP protocol.
1.3.6.1.4.1.890.1.5.12.42.7.2NodestaticMulticast
1.3.6.1.4.1.890.1.5.12.42.7.2.1ScalarmaxNumberOfMcastGroupsread-onlycurrentThe max number of static multicast groups supported by the system.
1.3.6.1.4.1.890.1.5.12.42.7.2.2TablemulticastGroupTablenot-accessiblecurrentA table that contains static multicast group information.
1.3.6.1.4.1.890.1.5.12.42.7.2.2.1RowmulticastGroupEntrynot-accessiblecurrentThe entry of multicast group table.
1.3.6.1.4.1.890.1.5.12.42.7.2.2.1.1ColumnmulticastGroupVidread-onlycurrentThe multicast VLAN of the group.
1.3.6.1.4.1.890.1.5.12.42.7.2.2.1.2ColumnmulticastGroupMacAddrread-onlycurrentThe multicast MAC address of the group.
1.3.6.1.4.1.890.1.5.12.42.7.2.2.1.3ColumnmulticastGroupPortsread-createcurrentThe port list which specifies the ports joining the multicast group.
1.3.6.1.4.1.890.1.5.12.42.7.2.2.1.4ColumnmulticastGroupRowStatusread-createcurrentThe row status of the multicast group entry.
1.3.6.1.4.1.890.1.5.12.42.7.3NodeigmpFilter
1.3.6.1.4.1.890.1.5.12.42.7.3.1ScalarmaxNumOfIgmpFiltersread-onlycurrentThe max number of IGMP filters supported by the system.
1.3.6.1.4.1.890.1.5.12.42.7.3.2TableigmpFilterTablenot-accessiblecurrentA table that contains IGMP filters.
1.3.6.1.4.1.890.1.5.12.42.7.3.2.1RowigmpFilterEntrynot-accessiblecurrentThe entry of IGMP filter table.
1.3.6.1.4.1.890.1.5.12.42.7.3.2.1.1ColumnigmpFilterNameread-onlycurrentThe IGMP filter name.
1.3.6.1.4.1.890.1.5.12.42.7.3.2.1.2ColumnigmpFilterIndexread-onlycurrentThe index which specif the filter rule.
1.3.6.1.4.1.890.1.5.12.42.7.3.2.1.3ColumnigmpFilterStartIpread-createcurrentThe start IP of the filter rule.
1.3.6.1.4.1.890.1.5.12.42.7.3.2.1.4ColumnigmpFilterEndIpread-createcurrentThe end IP of the filter rule.
1.3.6.1.4.1.890.1.5.12.42.7.3.2.1.5ColumnigmpFilterRowStatusread-createcurrentThe row status of the IGMP filter entry.
1.3.6.1.4.1.890.1.5.12.42.7.3.3TableigmpFilterPortTablenot-accessiblecurrentThis table specif the IGMP filter of the port.
1.3.6.1.4.1.890.1.5.12.42.7.3.3.1RowigmpFilterPortEntrynot-accessiblecurrentAn entry in igmpFilterPortTable.
1.3.6.1.4.1.890.1.5.12.42.7.3.3.1.1ColumnigmpFilterPortFilterNameread-writecurrentThe IGMP filter name of the port.
1.3.6.1.4.1.890.1.5.12.42.7.4NodemcastBandwidth
1.3.6.1.4.1.890.1.5.12.42.7.4.1ScalarmcastDefaultBandwidthread-writecurrentDefault bandwidth requirement for a multicast channel.
1.3.6.1.4.1.890.1.5.12.42.7.4.2ScalarmaxNumOfMcastBwread-onlycurrentThe maximum number of row entries that user can create in mcastBwTable.
1.3.6.1.4.1.890.1.5.12.42.7.4.3TablemcastBwTablenot-accessiblecurrentThis table defines bandwidth budget for a range of multicast IP channels.
1.3.6.1.4.1.890.1.5.12.42.7.4.3.1RowmcastBwEntrynot-accessiblecurrentAn entry of mcastBwTable.
1.3.6.1.4.1.890.1.5.12.42.7.4.3.1.1ColumnmcastBwIndexread-onlycurrentThe index which specify the entry.
1.3.6.1.4.1.890.1.5.12.42.7.4.3.1.2ColumnmcastBwStartIpread-onlycurrentThe start multicast IP of the bandwidth control range.
1.3.6.1.4.1.890.1.5.12.42.7.4.3.1.3ColumnmcastBwEndIpread-onlycurrentThe end multicast IP of the bandwidth control range.
1.3.6.1.4.1.890.1.5.12.42.7.4.3.1.4ColumnmcastBwBandwidthread-createcurrentThe bandwidth budget for the multicast IP channels.
1.3.6.1.4.1.890.1.5.12.42.7.4.3.1.5ColumnmcastBwRowStatusread-createcurrentThe row status of the entry.
1.3.6.1.4.1.890.1.5.12.42.7.4.4TablemcastBwPortTablenot-accessiblecurrentThis table specify the multicast bandwidth control of the port.
1.3.6.1.4.1.890.1.5.12.42.7.4.4.1RowmcastBwPortEntrynot-accessiblecurrentAn entry of mcastBwPortTable.
1.3.6.1.4.1.890.1.5.12.42.7.4.4.1.1ColumnmcastBwPortEnableread-writecurrentEnable/disable multicast bandwidth control for a port.
1.3.6.1.4.1.890.1.5.12.42.7.4.4.1.2ColumnmcastBwPortBandwidthread-writecurrentSet bandwidth threshold for a port.
1.3.6.1.4.1.890.1.5.12.42.7.5NodeigmpCount
1.3.6.1.4.1.890.1.5.12.42.7.5.1TableigmpCountPortTablenot-accessiblecurrentThis table specify the IGMP count limiting of the port.
1.3.6.1.4.1.890.1.5.12.42.7.5.1.1RowigmpCountPortEntrynot-accessiblecurrentAn entry of igmpCountPortTable.
1.3.6.1.4.1.890.1.5.12.42.7.5.1.1.1ColumnigmpCountPortEnableread-writecurrentEnable/disable IGMP count limiting for a port.
1.3.6.1.4.1.890.1.5.12.42.7.5.1.1.2ColumnigmpCountPortLimitread-writecurrentThe maximum allowed IGMP report count for a port.
1.3.6.1.4.1.890.1.5.12.42.7.6Nodemvlan
1.3.6.1.4.1.890.1.5.12.42.7.6.1ScalarmaxNumOfMvlanread-onlycurrentThe maximum number of row entries that user can create in mvlanTable.
1.3.6.1.4.1.890.1.5.12.42.7.6.2TablemvlanTablenot-accessiblecurrentA table containing static configuration information for each multicast VLAN configured into the device.
1.3.6.1.4.1.890.1.5.12.42.7.6.2.1RowmvlanEntrynot-accessiblecurrentAn entry of mvlanTable.
1.3.6.1.4.1.890.1.5.12.42.7.6.2.1.1ColumnmvlanIndexread-onlycurrentThe VLAN-ID refering to this VLAN.
1.3.6.1.4.1.890.1.5.12.42.7.6.2.1.2ColumnmvlanNameread-createcurrentAn administratively assigned string, which may be used to identify the VLAN.
1.3.6.1.4.1.890.1.5.12.42.7.6.2.1.3ColumnmvlanEgressPortsread-createcurrentThe set of ports which are permanently assigned to the egress list for this multicast VLAN.
1.3.6.1.4.1.890.1.5.12.42.7.6.2.1.4ColumnmvlanUntaggedPortsread-createcurrentThe set of ports which should transmit egress packets for this multicast VLAN as untagged.
1.3.6.1.4.1.890.1.5.12.42.7.6.2.1.5ColumnmvlanRowStatusread-createcurrentThis object indicates the status of this entry.
1.3.6.1.4.1.890.1.5.12.42.7.6.3TablemvlanTranslateTablenot-accessiblecurrentA table that contains multicast to VLAN translation.
1.3.6.1.4.1.890.1.5.12.42.7.6.3.1RowmvlanTranslateEntrynot-accessiblecurrentAn entry of mvlanTranslateTable.
1.3.6.1.4.1.890.1.5.12.42.7.6.3.1.1ColumnmvlanTranslateIndexread-onlycurrentThe index which specif the entry.
1.3.6.1.4.1.890.1.5.12.42.7.6.3.1.2ColumnmvlanTranslateStartIpread-writecurrentThe start IP of the multicast VLAN translation.
1.3.6.1.4.1.890.1.5.12.42.7.6.3.1.3ColumnmvlanTranslateEndIpread-writecurrentThe end IP of the multicast VLAN translation.
1.3.6.1.4.1.890.1.5.12.42.7.7NodequeryVid
1.3.6.1.4.1.890.1.5.12.42.7.7.1ScalarmaxNumOfQryVidread-onlycurrentThe maximum number of row entries that user can create in qryVidConfTable.
1.3.6.1.4.1.890.1.5.12.42.7.7.2TableqryVidConfTablenot-accessiblecurrentThis table defines statically set VLANs used for response IGMP report.
1.3.6.1.4.1.890.1.5.12.42.7.7.2.1RowqryVidConfEntrynot-accessiblecurrentAn entry in qryVidConfTable.
1.3.6.1.4.1.890.1.5.12.42.7.7.2.1.1ColumnqryVidread-onlycurrentVLAN ID.
1.3.6.1.4.1.890.1.5.12.42.7.7.2.1.2ColumnqryVidRowStatusread-createcurrentThis object indicates the status of this entry.
1.3.6.1.4.1.890.1.5.12.42.7.7.3TableqryVidStatusTablenot-accessiblecurrentThis table shows statically set or dynamically learned VLANs used for response IGMP report.
1.3.6.1.4.1.890.1.5.12.42.7.7.3.1RowqryVidStatusEntrynot-accessiblecurrentAn entry in qryVidStatusTable.
1.3.6.1.4.1.890.1.5.12.42.7.7.3.1.1ColumnqryVidTyperead-onlycurrentVLAN type.
1.3.6.1.4.1.890.1.5.12.42.7.9ScalarigmpVersionread-writecurrentSetting IGMP version.
1.3.6.1.4.1.890.1.5.12.42.8Nodeport
1.3.6.1.4.1.890.1.5.12.42.8.1TablesubrPortTablenot-accessiblecurrentThis table includes subscriber attributes for the port.
1.3.6.1.4.1.890.1.5.12.42.8.1.1RowsubrPortEntrynot-accessiblecurrentAn entry in subrPortTable.
1.3.6.1.4.1.890.1.5.12.42.8.1.1.1ColumnsubrPortNameread-writecurrentName of the subscriber.
1.3.6.1.4.1.890.1.5.12.42.8.1.1.2ColumnsubrPortTelread-writecurrentTelephone number of the subscriber.
1.3.6.1.4.1.890.1.5.12.42.8.3NodevdslPort
1.3.6.1.4.1.890.1.5.12.42.8.3.1TablevdslLineConfTablenot-accessiblecurrentThis table includes common attributes describing the VDSL line. This table is supported by R2.00 and later versions.
1.3.6.1.4.1.890.1.5.12.42.8.3.1.1RowvdslLineConfEntrynot-accessiblecurrentAn entry in vdslLineConfTable.
1.3.6.1.4.1.890.1.5.12.42.8.3.1.1.1ColumnvdslLineConfUpboread-writecurrentEnable/disable upstream power backoff control.
1.3.6.1.4.1.890.1.5.12.42.8.3.1.1.2ColumnvdslLineConfVdslProfileread-writecurrentSet VDSL profile.
1.3.6.1.4.1.890.1.5.12.42.8.3.1.1.4ColumnvdslLineConfRfiBandread-writecurrentSet VDSL customized RFI configuration. disable: not apply RFI notch to port ansi: use pre-defined ANSI RFI notch etsi: use pre-defined ETSI notch custom: user …
1.3.6.1.4.1.890.1.5.12.42.8.3.1.1.5ColumnvdslLineConfIpqosProfileread-writecurrent
1.3.6.1.4.1.890.1.5.12.42.8.3.1.1.6ColumnvdslLineConfVturInpread-writecurrentThis object is supported by R5.00 and later versions.
1.3.6.1.4.1.890.1.5.12.42.8.3.1.1.7ColumnvdslLineConfVtucInpread-writecurrentThis object is supported by R5.00 and later versions.
1.3.6.1.4.1.890.1.5.12.42.8.3.1.1.8ColumnvdslLineConfOptionMaskread-writecurrentThis object is supported by R5.00 and later versions. Bit1: disable Trellis coding in ADSL mode Bit2: disable Reed-Solomon coding for ADSL Bit3: disable upstre…
1.3.6.1.4.1.890.1.5.12.42.8.3.1.1.9ColumnvdslLineConfUpboForceLengthread-writecurrent-1 means no electric length. This object is supported by R5.00 and later versions.
1.3.6.1.4.1.890.1.5.12.42.8.3.1.1.10ColumnvdslLineConfPsdShaperead-writecurrentThis object is supported by R5.00 and later versions.
1.3.6.1.4.1.890.1.5.12.42.8.3.1.1.11ColumnvdslLineConfDpboread-writecurrentThis object is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.12.42.8.3.1.1.12ColumnvdslLineConfDpboParamEselread-writecurrentThis object is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.12.42.8.3.1.1.13ColumnvdslLineConfDpboParamEscmaread-writecurrent-1~1.5 in step of 1/256. This object is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.12.42.8.3.1.1.14ColumnvdslLineConfDpboParamEscmbread-writecurrent-1~1.5 in step of 1/256. This object is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.12.42.8.3.1.1.15ColumnvdslLineConfDpboParamEscmcread-writecurrent-1~1.5 in step of 1/256. This object is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.12.42.8.3.1.1.16ColumnvdslLineConfDpboParamMusread-writecurrentThis object is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.12.42.8.3.1.1.17ColumnvdslLineConfDpboParamFminread-writecurrentThis object is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.12.42.8.3.1.1.18ColumnvdslLineConfDpboParamFmaxread-writecurrentThis object is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.12.42.8.3.1.1.19ColumnvdslLineConfDpboParamPsdIdread-writecurrentValid range for setting is 1~6.
1.3.6.1.4.1.890.1.5.12.42.8.3.1.1.20ColumnvdslLineConfSraModeread-writecurrentDefines what form of transmit rate adaptation is configured on this modem.
1.3.6.1.4.1.890.1.5.12.42.8.3.2NodevdslVlan
1.3.6.1.4.1.890.1.5.12.42.8.3.2.1TablevdslPortConfTablenot-accessiblecurrentThis table includes common attributes describing the VDSL port. This table is supported by R2.00 and later versions.
1.3.6.1.4.1.890.1.5.12.42.8.3.2.1.1RowvdslPortConfEntrynot-accessiblecurrentAn entry in vdslPortConfTable.
1.3.6.1.4.1.890.1.5.12.42.8.3.2.1.1.4ColumnvdslPortConfTlsEnableread-writecurrentEnable/disable the transparent LAN service.
1.3.6.1.4.1.890.1.5.12.42.8.3.2.1.1.5ColumnvdslPortConfTlsVidread-writecurrentThe transparent LAN service s-tag VID.
1.3.6.1.4.1.890.1.5.12.42.8.3.2.1.1.6ColumnvdslPortConfTlsPriorityread-writecurrentThe transparent LAN service s-tag priority.
1.3.6.1.4.1.890.1.5.12.42.8.3.2.1.1.7ColumnvdslPortConfDtEnableread-writecurrentEnable/disable the Double Tagging service.
1.3.6.1.4.1.890.1.5.12.42.8.3.2.1.1.8ColumnvdslPortConfDtSVidread-writecurrentThe Double Tagging service s-tag VID.
1.3.6.1.4.1.890.1.5.12.42.8.3.2.1.1.9ColumnvdslPortConfDtSPriorityread-writecurrentThe Double Tagging service s-tag priority.
1.3.6.1.4.1.890.1.5.12.42.8.3.2.1.1.10ColumnvdslPortConfDtCVidread-writecurrentThe Double Tagging service c-tag VID.
1.3.6.1.4.1.890.1.5.12.42.8.3.2.1.1.11ColumnvdslPortConfDtCPriorityread-writecurrentThe Double Tagging service c-tag priority.
1.3.6.1.4.1.890.1.5.12.42.8.3.2.4TablevdslPortPvlanTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.42.8.3.2.4.1RowvdslPortPvlanEntrynot-accessiblecurrentAn entry in vdslPortPvlanTable.
1.3.6.1.4.1.890.1.5.12.42.8.3.2.4.1.1ColumnvdslPortPvlanEtyperead-onlycurrent0~0xffff.
1.3.6.1.4.1.890.1.5.12.42.8.3.2.4.1.2ColumnvdslPortPvlanVidread-createcurrent
1.3.6.1.4.1.890.1.5.12.42.8.3.2.4.1.3ColumnvdslPortPvlanPriorityread-createcurrent
1.3.6.1.4.1.890.1.5.12.42.8.3.2.4.1.4ColumnvdslPortPvlanRowStatusread-createcurrent
1.3.6.1.4.1.890.1.5.12.42.8.3.3TablevdslRfiCustomTablenot-accessiblecurrentThis table includes VDSL customized RFI configuration. This table is supported by R2.00 and later versions.
1.3.6.1.4.1.890.1.5.12.42.8.3.3.1RowvdslRfiCustomEntrynot-accessiblecurrentAn entry in vdslRfiCustomTable.
1.3.6.1.4.1.890.1.5.12.42.8.3.3.1.1ColumnvdslRfiCustomIndexread-onlycurrentIndex of the table.
1.3.6.1.4.1.890.1.5.12.42.8.3.3.1.2ColumnvdslRfiCustomStartFreqread-writecurrentThe start value of the customized frequency range.
1.3.6.1.4.1.890.1.5.12.42.8.3.3.1.3ColumnvdslRfiCustomEndFreqread-writecurrentThe end value of the customized frequency range.
1.3.6.1.4.1.890.1.5.12.42.8.3.3.1.4ColumnvdslRfiCustomEnableread-writecurrentEnable or disable the customized frequency range setting.
1.3.6.1.4.1.890.1.5.12.42.8.3.4TablevdslLineConfUpboParamTablenot-accessiblecurrentThis table includes VDSL UPBO configuration. This table is supported by R5.00 and later versions.
1.3.6.1.4.1.890.1.5.12.42.8.3.4.1RowvdslLineConfUpboParamEntrynot-accessiblecurrentAn entry in vdslLineConfUpboParamTable.
1.3.6.1.4.1.890.1.5.12.42.8.3.4.1.1ColumnvdslLineConfUpboParamBandread-onlycurrentIndex of the table.
1.3.6.1.4.1.890.1.5.12.42.8.3.4.1.2ColumnvdslLineConfUpboParamAread-writecurrent
1.3.6.1.4.1.890.1.5.12.42.8.3.4.1.3ColumnvdslLineConfUpboParamBread-writecurrent
1.3.6.1.4.1.890.1.5.12.42.8.3.5TablevdslLineConfDpboTablenot-accessiblecurrentThis table includes VDSL DPBO configuration. This table is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.12.42.8.3.5.1RowvdslLineConfDpboEntrynot-accessiblecurrentAn entry in vdslLineConfDpboTable.
1.3.6.1.4.1.890.1.5.12.42.8.3.5.1.1ColumnvdslLineConfDpboIndexread-onlycurrentIndex of the table.
1.3.6.1.4.1.890.1.5.12.42.8.3.5.1.2ColumnvdslLineConfDpboToneread-writecurrent
1.3.6.1.4.1.890.1.5.12.42.8.3.5.1.3ColumnvdslLineConfDpboPsdread-writecurrent
1.3.6.1.4.1.890.1.5.12.42.8.3.6TablevdslLineStatusTablenot-accessiblecurrentThis table includes the VDSL line status.
1.3.6.1.4.1.890.1.5.12.42.8.3.6.1RowvdslLineStatusEntrynot-accessiblecurrentAn entry in vdslLineStatusTable.
1.3.6.1.4.1.890.1.5.12.42.8.3.6.1.1ColumnvdslLineStatusVturInpread-onlycurrentThe upstream Impulse Noise Protection in unit of 0.1 DTM symbol.
1.3.6.1.4.1.890.1.5.12.42.8.3.6.1.2ColumnvdslLineStatusVtucInpread-onlycurrentThe downstream Impulse Noise Protection in unit of 0.1 DTM symbol.
1.3.6.1.4.1.890.1.5.12.42.8.4Nodepvc
1.3.6.1.4.1.890.1.5.12.42.8.4.1ScalarmaxNumOfPvcsread-onlycurrentThe maximum number of PVCs which could be created on a port.
1.3.6.1.4.1.890.1.5.12.42.8.4.2TablepvcTablenot-accessiblecurrentThis table includes PVC configuration.
1.3.6.1.4.1.890.1.5.12.42.8.4.2.1RowpvcEntrynot-accessiblecurrentAn entry in pvcTable.
1.3.6.1.4.1.890.1.5.12.42.8.4.2.1.1ColumnpvcVpiread-onlycurrentVPI of the pvc.
1.3.6.1.4.1.890.1.5.12.42.8.4.2.1.2ColumnpvcVciread-onlycurrentVCI of the pvc.
1.3.6.1.4.1.890.1.5.12.42.8.4.2.1.3ColumnpvcPvidread-onlycurrentDefault VID of the pvc.
1.3.6.1.4.1.890.1.5.12.42.8.4.2.1.5ColumnpvcPriorityread-createcurrent802.1p default priority of the pvc.
1.3.6.1.4.1.890.1.5.12.42.8.4.2.1.6ColumnpvcProfileread-createcurrentThe value of this object identifies the row in the ipqosProfileTable.
1.3.6.1.4.1.890.1.5.12.42.8.4.2.1.7ColumnpvcEncapread-createcurrentEncapsulation of the pvc.
1.3.6.1.4.1.890.1.5.12.42.8.4.2.1.8ColumnpvcRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.12.42.8.4.5TablepvcPvlanTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.42.8.4.5.1RowpvcPvlanEntrynot-accessiblecurrentAn entry in pvcPvlanTable.
1.3.6.1.4.1.890.1.5.12.42.8.4.5.1.1ColumnpvcPvlanVpiread-onlycurrentVPI of the pvc protocol VLAN.
1.3.6.1.4.1.890.1.5.12.42.8.4.5.1.2ColumnpvcPvlanVciread-onlycurrentVCI of the pvc protocol VLAN.
1.3.6.1.4.1.890.1.5.12.42.8.4.5.1.3ColumnpvcPvlanEtyperead-onlycurrent0~0xffff.
1.3.6.1.4.1.890.1.5.12.42.8.4.5.1.4ColumnpvcPvlanVidread-createcurrent
1.3.6.1.4.1.890.1.5.12.42.8.4.5.1.5ColumnpvcPvlanPriorityread-createcurrent
1.3.6.1.4.1.890.1.5.12.42.8.4.5.1.6ColumnpvcPvlanRowStatusread-createcurrent
1.3.6.1.4.1.890.1.5.12.42.8.7NodepvcStats
1.3.6.1.4.1.890.1.5.12.42.8.7.1TablepvcStatsTablenot-accessiblecurrentThis table includes the status of the virtual channel.
1.3.6.1.4.1.890.1.5.12.42.8.7.1.1RowpvcStatsEntrynot-accessiblecurrentAn entry in pvcStatsTable.
1.3.6.1.4.1.890.1.5.12.42.8.7.1.1.1ColumnpvcStatsTxPacketsread-onlycurrentCount of channel Tx packets.
1.3.6.1.4.1.890.1.5.12.42.8.7.1.1.2ColumnpvcStatsRxPacketsread-onlycurrentCount of channel Rx packets.
1.3.6.1.4.1.890.1.5.12.42.8.8Noderpvc
1.3.6.1.4.1.890.1.5.12.42.8.8.1TablerpvcGatewayTablenot-accessiblecurrentThis table includes Routed Gateway configuration.
1.3.6.1.4.1.890.1.5.12.42.8.8.1.1RowrpvcGatewayEntrynot-accessiblecurrentAn entry in Routed Gateway table.
1.3.6.1.4.1.890.1.5.12.42.8.8.1.1.1ColumnrpvcGatewayIpread-onlycurrentIP of RPVC gateway.
1.3.6.1.4.1.890.1.5.12.42.8.8.1.1.2ColumnrpvcGatewayVlanIdread-writecurrentVlan id send to this RPVC gateway.
1.3.6.1.4.1.890.1.5.12.42.8.8.1.1.3ColumnrpvcGatewayRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.12.42.8.8.1.1.4ColumnrpvcGatewayPriorityread-writecurrent802.1p p bit send to this RPVC gateway.
1.3.6.1.4.1.890.1.5.12.42.8.8.2TablerpvcTablenot-accessiblecurrentThis table includes RPVC configuration.
1.3.6.1.4.1.890.1.5.12.42.8.8.2.1RowrpvcEntrynot-accessiblecurrentAn entry in rpvcTable.
1.3.6.1.4.1.890.1.5.12.42.8.8.2.1.1ColumnrpvcVpiread-onlycurrentVPI of the rpvc.
1.3.6.1.4.1.890.1.5.12.42.8.8.2.1.2ColumnrpvcVciread-onlycurrentVCI of the rpvc.
1.3.6.1.4.1.890.1.5.12.42.8.8.2.1.3ColumnrpvcEncapread-createcurrentEncapsulation of the rpvc.
1.3.6.1.4.1.890.1.5.12.42.8.8.2.1.4ColumnrpvcProfileread-createcurrentThe ipqos profile of the rpvc.
1.3.6.1.4.1.890.1.5.12.42.8.8.2.1.5ColumnrpvcIpread-onlycurrentThe IP of the rpvc.
1.3.6.1.4.1.890.1.5.12.42.8.8.2.1.6ColumnrpvcNetmaskread-onlycurrentThe IP mask of the rpvc IP.
1.3.6.1.4.1.890.1.5.12.42.8.8.2.1.7ColumnrpvcGatewayIpAddressread-createcurrentThe gateway IP of rpvc.
1.3.6.1.4.1.890.1.5.12.42.8.8.2.1.8ColumnrpvcRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.12.42.8.8.3TablerpvcRouteDomainTablenot-accessiblecurrentThis table includes RPVC route domain configuration.
1.3.6.1.4.1.890.1.5.12.42.8.8.3.1RowrpvcRouteDomainEntrynot-accessiblecurrentAn entry in rpvcRouteDomainTable.
1.3.6.1.4.1.890.1.5.12.42.8.8.3.1.1ColumnrpvcRouteDomainVpiread-onlycurrentVPI of the rpvc.
1.3.6.1.4.1.890.1.5.12.42.8.8.3.1.2ColumnrpvcRouteDomainVciread-onlycurrentVCI of the rpvc.
1.3.6.1.4.1.890.1.5.12.42.8.8.3.1.3ColumnrpvcRouteDomainIpread-onlycurrentThe route domain IP.
1.3.6.1.4.1.890.1.5.12.42.8.8.3.1.4ColumnrpvcRouteDomainNetmaskread-onlycurrentThe IP mask of the route domain IP.
1.3.6.1.4.1.890.1.5.12.42.8.8.3.1.5ColumnrpvcRouteDomainRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.12.42.8.8.4ScalarrpvcArpAgingTimeread-writecurrentSet RPVC ARP proxy aging time 10..10000 seconds, 0 to disable againg.
1.3.6.1.4.1.890.1.5.12.42.8.8.5ScalarrpvcArpFlushread-writecurrentFlush the RPVC ARP proxy table.
1.3.6.1.4.1.890.1.5.12.42.8.9TabledsBcastDisableTablenot-accessiblecurrentThis table includes Down Stream Bcast configuration.
1.3.6.1.4.1.890.1.5.12.42.8.9.1RowdsBcastDisableEntrynot-accessiblecurrentAn entry in Down Stream Bcast table.
1.3.6.1.4.1.890.1.5.12.42.8.9.1.1ColumndsBcastDisableVlanIdread-onlycurrentdownstream broadcast disabled vid.
1.3.6.1.4.1.890.1.5.12.42.8.9.1.2ColumndsBcastDisableRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.12.42.8.10Nodepaepvc
1.3.6.1.4.1.890.1.5.12.42.8.10.1TablepaepvcTablenot-accessiblecurrentThis table includes PPPoAoE PVC configuration.
1.3.6.1.4.1.890.1.5.12.42.8.10.1.1RowpaepvcEntrynot-accessiblecurrentAn entry of paepvcTable.
1.3.6.1.4.1.890.1.5.12.42.8.10.1.1.1ColumnpaepvcVpiread-onlycurrentVPI of the pvc.
1.3.6.1.4.1.890.1.5.12.42.8.10.1.1.2ColumnpaepvcVciread-onlycurrentVCI of the pvc.
1.3.6.1.4.1.890.1.5.12.42.8.10.1.1.3ColumnpaepvcPvidread-onlycurrentDefault VID of the pvc.
1.3.6.1.4.1.890.1.5.12.42.8.10.1.1.4ColumnpaepvcEncapread-createcurrentEncapsulation of the paepvc.
1.3.6.1.4.1.890.1.5.12.42.8.10.1.1.5ColumnpaepvcPriorityread-createcurrent802.1p default priority of the pvc.
1.3.6.1.4.1.890.1.5.12.42.8.10.1.1.6ColumnpaepvcProfileread-createcurrentThe value of this object identifies the row in the ipqosProfileTable.
1.3.6.1.4.1.890.1.5.12.42.8.10.1.1.7ColumnpaepvcAcNameread-createcurrentAccess concentrator name.
1.3.6.1.4.1.890.1.5.12.42.8.10.1.1.8ColumnpaepvcServiceNameread-createcurrentService name.
1.3.6.1.4.1.890.1.5.12.42.8.10.1.1.9ColumnpaepvcHelloTimeread-createcurrentThe system will close the PVC if there are not any LCP echo messages passed through during the LCP hello time.
1.3.6.1.4.1.890.1.5.12.42.8.10.1.1.10ColumnpaepvcRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.12.42.8.11Nodetlspvc
1.3.6.1.4.1.890.1.5.12.42.8.11.1TabletlspvcTablenot-accessiblecurrentThis table includes Transparent LAN Service (TLS) PVC configuration.
1.3.6.1.4.1.890.1.5.12.42.8.11.1.1RowtlspvcEntrynot-accessiblecurrentAn entry of tlspvcTable.
1.3.6.1.4.1.890.1.5.12.42.8.11.1.1.1ColumntlspvcVpiread-onlycurrentVPI of the pvc.
1.3.6.1.4.1.890.1.5.12.42.8.11.1.1.2ColumntlspvcVciread-onlycurrentVCI of the pvc.
1.3.6.1.4.1.890.1.5.12.42.8.11.1.1.3ColumntlspvcSvidread-onlycurrents-tag VLAN ID of the pvc.
1.3.6.1.4.1.890.1.5.12.42.8.11.1.1.4ColumntlspvcEncapread-createcurrentEncapsulation of the tlspvc.
1.3.6.1.4.1.890.1.5.12.42.8.11.1.1.5ColumntlspvcSpriorityread-createcurrents-tag priority of the pvc.
1.3.6.1.4.1.890.1.5.12.42.8.11.1.1.6ColumntlspvcProfileread-createcurrentThe value of this object identifies the row in the ipqosProfileTable.
1.3.6.1.4.1.890.1.5.12.42.8.11.1.1.7ColumntlspvcRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.12.42.8.13Nodedtpvc
1.3.6.1.4.1.890.1.5.12.42.8.13.1TabledtpvcTablenot-accessiblecurrentThis table includes Double Tagging (DT) PVC configuration.
1.3.6.1.4.1.890.1.5.12.42.8.13.1.1RowdtpvcEntrynot-accessiblecurrentAn entry of dtpvcTable.
1.3.6.1.4.1.890.1.5.12.42.8.13.1.1.1ColumndtpvcVpiread-onlycurrentVPI of the pvc.
1.3.6.1.4.1.890.1.5.12.42.8.13.1.1.2ColumndtpvcVciread-onlycurrentVCI of the pvc.
1.3.6.1.4.1.890.1.5.12.42.8.13.1.1.3ColumndtpvcSvidread-onlycurrents-tag VLAN ID of the pvc.
1.3.6.1.4.1.890.1.5.12.42.8.13.1.1.4ColumndtpvcSpriorityread-createcurrents-tag priority of the pvc.
1.3.6.1.4.1.890.1.5.12.42.8.13.1.1.5ColumndtpvcCvidread-createcurrentc-tag VLAN ID of the pvc.
1.3.6.1.4.1.890.1.5.12.42.8.13.1.1.6ColumndtpvcCpriorityread-createcurrentc-tag priority of the pvc.
1.3.6.1.4.1.890.1.5.12.42.8.13.1.1.7ColumndtpvcEncapread-createcurrentEncapsulation of the dtpvc.
1.3.6.1.4.1.890.1.5.12.42.8.13.1.1.8ColumndtpvcProfileread-createcurrentThe value of this object identifies the row in the ipqosProfileTable.
1.3.6.1.4.1.890.1.5.12.42.8.13.1.1.9ColumndtpvcRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.12.42.9Nodeprofile
1.3.6.1.4.1.890.1.5.12.42.9.1NodesraShiftMarginProfile
1.3.6.1.4.1.890.1.5.12.42.9.1.1TablesraShiftMarginProfileTablenot-accessiblecurrentThis table includes sra shift margin related configuration.
1.3.6.1.4.1.890.1.5.12.42.9.1.1.1RowsraShiftMarginProfileEntrynot-accessiblecurrentAn entry in ipqosProfileTable.
1.3.6.1.4.1.890.1.5.12.42.9.1.1.1.1ColumnsraShiftMarginProfileNameread-onlycurrentThis object identifies a row in this table.
1.3.6.1.4.1.890.1.5.12.42.9.1.1.1.2ColumnxtucConfDownshiftSnrMgnread-createcurrentSpecifies the downstream SRA Down Shift Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. in unit of 1 db.
1.3.6.1.4.1.890.1.5.12.42.9.1.1.1.3ColumnxtucConfUpshiftSnrMgnread-createcurrentSpecifies the downstream SRA UP Shift Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. in unit of 1 db.
1.3.6.1.4.1.890.1.5.12.42.9.1.1.1.6ColumnxturConfDownshiftSnrMgnread-createcurrentSpecifies the upstream SRA Down Shift Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. in unit of 1 db.
1.3.6.1.4.1.890.1.5.12.42.9.1.1.1.7ColumnxturConfUpshiftSnrMgnread-createcurrentSpecifies the upstream SRA UP Shift Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. in unit of 1 db.
1.3.6.1.4.1.890.1.5.12.42.9.1.1.1.10ColumnsraShiftMarginProfileStatusread-createcurrentThis object is used to create a new row or modify or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.12.42.9.8NodeipqosProfile
1.3.6.1.4.1.890.1.5.12.42.9.8.1ScalarmaxNumOfIpqosProfilesread-onlycurrentThe maximum number of IPQOS profiles supported by the system.
1.3.6.1.4.1.890.1.5.12.42.9.8.2TableipqosProfileTablenot-accessiblecurrentThis table includes IPQOS related configuration.
1.3.6.1.4.1.890.1.5.12.42.9.8.2.1RowipqosProfileEntrynot-accessiblecurrentAn entry in ipqosProfileTable.
1.3.6.1.4.1.890.1.5.12.42.9.8.2.1.1ColumnipqosProfileNameread-onlycurrentThis object is used by the IPQOS profile table in order to identify a row of this table.
1.3.6.1.4.1.890.1.5.12.42.9.8.2.1.2ColumnipqosProfileNumOfQueueread-createcurrentThe number of IPQOS queues.
1.3.6.1.4.1.890.1.5.12.42.9.8.2.1.3ColumnipqosProfileRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in the table.
1.3.6.1.4.1.890.1.5.12.42.9.8.3TableipqosProfileQueueTablenot-accessiblecurrentThis table includes IPQOS queue related configuration.
1.3.6.1.4.1.890.1.5.12.42.9.8.3.1RowipqosProfileQueueEntrynot-accessiblecurrentAn entry in ipqosProfileQueueTable.
1.3.6.1.4.1.890.1.5.12.42.9.8.3.1.1ColumnipqosProfileQueueIndexread-onlycurrentIPQOS queue index.
1.3.6.1.4.1.890.1.5.12.42.9.8.3.1.2ColumnipqosProfileQueuePIRread-writecurrentPeak rate.(multiple of 256)
1.3.6.1.4.1.890.1.5.12.42.9.8.3.1.3ColumnipqosProfileQueueCIRread-writecurrentCommited rate.(multiple of 256)
1.3.6.1.4.1.890.1.5.12.42.9.8.3.1.4ColumnipqosProfileQueuePBSread-writecurrentPeak burst size.(mutiple of 256)
1.3.6.1.4.1.890.1.5.12.42.9.8.3.1.5ColumnipqosProfileQueueCBSread-writecurrentCommited burst size.(mutiple of 256)
1.3.6.1.4.1.890.1.5.12.42.9.8.3.1.6ColumnipqosProfileQueueLevelread-writecurrentQueue level.
1.3.6.1.4.1.890.1.5.12.42.9.8.3.1.7ColumnipqosProfileQueueWeightread-writecurrentQueue weight.
1.3.6.1.4.1.890.1.5.12.42.10Nodeswitch
1.3.6.1.4.1.890.1.5.12.42.10.1ScalarmanagementVLANIdread-writecurrentThe VLAN ID for management.
1.3.6.1.4.1.890.1.5.12.42.10.2ScalarmaxNumOfStaticVlansread-onlycurrentThe maximum number of VLANs supported by the system.
1.3.6.1.4.1.890.1.5.12.42.10.4Nodepktfilter
1.3.6.1.4.1.890.1.5.12.42.10.4.1TablepktFilterPortTablenot-accessiblecurrentThis table includes packet filtering for each port.
1.3.6.1.4.1.890.1.5.12.42.10.4.1.1RowpktFilterPortEntrynot-accessiblecurrentAn entry in pktFilterPortTable.
1.3.6.1.4.1.890.1.5.12.42.10.4.1.1.1ColumnpktFilterread-writecurrentThe packet filter. The semantic for each bit is: BIT 1: accept all BIT 2: accept PPPoE only BIT 3: reject ARP BIT 4: reject DHCP BIT 5: reject EAPOL BIT 6: rej…
1.3.6.1.4.1.890.1.5.12.42.10.5Nodedot1x
1.3.6.1.4.1.890.1.5.12.42.10.5.1ScalarmaxNumberOfRadiusServersread-onlycurrentThe max number of the RADIUS Servers.
1.3.6.1.4.1.890.1.5.12.42.10.5.2TableradiusServerTablenot-accessiblecurrentA table that contains Radius Server information.
1.3.6.1.4.1.890.1.5.12.42.10.5.2.1RowradiusServerEntrynot-accessiblecurrentThe entry of Radius Server table.
1.3.6.1.4.1.890.1.5.12.42.10.5.2.1.1ColumnradiusServerIndexread-onlycurrentThe identity of the RADIUS server.
1.3.6.1.4.1.890.1.5.12.42.10.5.2.1.2ColumnradiusServerIpread-createcurrentThe IP address of the Radius Server.
1.3.6.1.4.1.890.1.5.12.42.10.5.2.1.3ColumnradiusServerPortread-createcurrentThe UDP port of the Radius Server.
1.3.6.1.4.1.890.1.5.12.42.10.5.2.1.4ColumnradiusSharedSecretread-createcurrentThe shared secret of the Radius Server.
1.3.6.1.4.1.890.1.5.12.42.10.5.2.1.5ColumnradiusServerRowStatusread-createcurrentThe row status of the Radius Server entry.
1.3.6.1.4.1.890.1.5.12.42.10.5.3Scalardot1xEnableread-writecurrentEnable/disable the 802.1x function.
1.3.6.1.4.1.890.1.5.12.42.10.5.4Tabledot1xPortTablenot-accessiblecurrentThis table includes the configuration of 802.1x.
1.3.6.1.4.1.890.1.5.12.42.10.5.4.1Rowdot1xPortEntrynot-accessiblecurrentAn entry in dot1xPortTable.
1.3.6.1.4.1.890.1.5.12.42.10.5.4.1.1Columndot1xPortEnableread-writecurrentThe option defines if the port enables 802.1x settings.
1.3.6.1.4.1.890.1.5.12.42.10.5.4.1.2Columndot1xPortControlread-writecurrentThe configuration defines the 802.1x port control type.
1.3.6.1.4.1.890.1.5.12.42.10.5.4.1.3Columndot1xPortReAuthEnableread-writecurrentThe option defines if the port enables 802.1x re-authentication.
1.3.6.1.4.1.890.1.5.12.42.10.5.4.1.4Columndot1xPortReAuthPeriodread-writecurrentThe configuration defines the 802.1x re-authentication period (seconds) for each port.
1.3.6.1.4.1.890.1.5.12.42.10.5.5ScalarradiusModeread-writecurrentSet RADIUS mode as let IP DSLAM uses an external RADIUS server to authenticate users or let IP DSLAM uses its internal database of user names and passwords to …
1.3.6.1.4.1.890.1.5.12.42.10.5.6ScalarmaxNumberOfRadiusUserProfilesread-onlycurrentThe max number of the RADIUS user profiles.
1.3.6.1.4.1.890.1.5.12.42.10.5.7TableradiusUserProfileTablenot-accessiblecurrentA table includes the configuration of RADIUS user profile.
1.3.6.1.4.1.890.1.5.12.42.10.5.7.1RowradiusUserProfileEntrynot-accessiblecurrentAn entry of radiusUserProfileTable.
1.3.6.1.4.1.890.1.5.12.42.10.5.7.1.1ColumnradiusUserProfileUserNameread-onlycurrentThe user name.
1.3.6.1.4.1.890.1.5.12.42.10.5.7.1.2ColumnradiusUserProfileUserPasswordread-createcurrentThe user password.
1.3.6.1.4.1.890.1.5.12.42.10.5.7.1.3ColumnradiusUserProfileRowStatusread-createcurrentThe row status used to create or delete an user.
1.3.6.1.4.1.890.1.5.12.42.10.6Nodedot3ad
1.3.6.1.4.1.890.1.5.12.42.10.6.1Tabledot3adTablenot-accessiblecurrentThe table contains 802.3ad configuration.
1.3.6.1.4.1.890.1.5.12.42.10.6.1.1Rowdot3adEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.42.10.6.1.1.1Columndot3adGroupIdread-onlycurrentGroup ID 1 for the subtending group and 2 for the uplink group.
1.3.6.1.4.1.890.1.5.12.42.10.6.1.1.2Columndot3adEnableread-writecurrentEnable/disable 802.3ad function.
1.3.6.1.4.1.890.1.5.12.42.10.6.2ScalarlacpPriorityread-writecurrentLACP system priority.
1.3.6.1.4.1.890.1.5.12.42.10.6.3ScalarlacpTimeoutread-writecurrentThe time interval to exchange LACP packets in order to check that the peer port in the trunk group is still up.
1.3.6.1.4.1.890.1.5.12.42.10.6.4TableportTrunkingTablenot-accessiblecurrentThe table contains current status of port trunking.
1.3.6.1.4.1.890.1.5.12.42.10.6.4.1RowportTrunkingEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.42.10.6.4.1.1ColumnportTrunkingGroupIdread-onlycurrentGroup ID 1 for the subtending group and 2 for the uplink group.
1.3.6.1.4.1.890.1.5.12.42.10.6.4.1.2ColumnportTrunkingStatusread-onlycurrentPort trunking status.
1.3.6.1.4.1.890.1.5.12.42.10.6.4.1.3ColumnportTrunkingPortListread-onlycurrentThe port list which actually joins the trunking group.
1.3.6.1.4.1.890.1.5.12.42.10.9NodeportIsolation
1.3.6.1.4.1.890.1.5.12.42.10.9.1ScalarportIsolationEnableread-writecurrentEnable/disable port isolation.
1.3.6.1.4.1.890.1.5.12.42.10.10Nodedscp
1.3.6.1.4.1.890.1.5.12.42.10.10.1TabledscpMappingTablenot-accessiblecurrentThe table contains DSCP mapping configuration for the adsl ports.
1.3.6.1.4.1.890.1.5.12.42.10.10.1.1RowdscpMappingEntrynot-accessiblecurrentAn entry of dscpMappingTable.
1.3.6.1.4.1.890.1.5.12.42.10.10.1.1.1ColumndscpSrcCodePointread-onlycurrentThe DSCP source code point used for mapping.
1.3.6.1.4.1.890.1.5.12.42.10.10.1.1.3ColumndscpMapPriorityread-writecurrentThe mapping p bits that will replace the source p bits in the incoming packet.
1.3.6.1.4.1.890.1.5.12.42.10.10.2TabledscpPortTablenot-accessiblecurrentThe table contains DSCP mapping configuration for the adsl ports.
1.3.6.1.4.1.890.1.5.12.42.10.10.2.1RowdscpPortEntrynot-accessiblecurrentAn entry of dscpPortTable.
1.3.6.1.4.1.890.1.5.12.42.10.10.2.1.1ColumndscpStatusEnableread-writecurrentThe DSCP port status.
1.3.6.1.4.1.890.1.5.12.42.10.11Noderstp
1.3.6.1.4.1.890.1.5.12.42.10.11.1ScalarrstpEnableread-writecurrentEnable/disable MSTP protocol. This object is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.12.42.10.12NodevlanIsolation
1.3.6.1.4.1.890.1.5.12.42.10.12.1TablevlanIsolationTablenot-accessiblecurrentA table contains configuration of isolated VLAN.
1.3.6.1.4.1.890.1.5.12.42.10.12.1.1RowvlanIsolationEntrynot-accessiblecurrentAn entry of vlanIsolationTable.
1.3.6.1.4.1.890.1.5.12.42.10.12.1.1.1ColumnvlanIsolationRowStatusread-createcurrentRow status of the table used to create/delete an entry.
1.3.6.1.4.1.890.1.5.12.42.10.13NodeenetMtu
1.3.6.1.4.1.890.1.5.12.42.10.13.1ScalarenetMtuEntryread-writecurrentSets the MTU size for layer 2 frame, size from 1526 to 1532, default value is 1526.
1.3.6.1.4.1.890.1.5.12.42.10.14Nodetpid
1.3.6.1.4.1.890.1.5.12.42.10.14.1ScalartpidEntryread-writecurrentSets TPID(Tag Protocol Identifier) of tagged frame, 0~FFFF.
1.3.6.1.4.1.890.1.5.12.42.10.51Nodedhcp
1.3.6.1.4.1.890.1.5.12.42.10.51.1ScalardhcpRelayEnableread-writecurrentEnable/disable DHCP relay Option82 function.
1.3.6.1.4.1.890.1.5.12.42.10.51.2TabledhcpRelay82Tablenot-accessiblecurrentA table that contains DHCP Relay configuration.
1.3.6.1.4.1.890.1.5.12.42.10.51.2.1RowdhcpRelay82Entrynot-accessiblecurrentThe entry of DHCP Relay table.
1.3.6.1.4.1.890.1.5.12.42.10.51.2.1.1ColumndhcpRelay82PrimaryServerread-writecurrentThe IP address of the DHCP Relay primary server.
1.3.6.1.4.1.890.1.5.12.42.10.51.2.1.2ColumndhcpRelay82SecondaryServerread-writecurrentThe IP address of the DHCP Relay secondary server.
1.3.6.1.4.1.890.1.5.12.42.10.51.2.1.3ColumndhcpRelay82ActiveServerread-writecurrentThe current active DHCP Relay server.
1.3.6.1.4.1.890.1.5.12.42.10.51.2.1.4ColumndhcpRelay82Enableread-createcurrentEnable/disable DHCP relay and Option82 function.
1.3.6.1.4.1.890.1.5.12.42.10.51.2.1.5ColumndhcpRelay82Inforead-createcurrentUser specific Option82 information.
1.3.6.1.4.1.890.1.5.12.42.10.51.2.1.6ColumndhcpRelay82RelayModeread-createcurrentDHCP relay mode.
1.3.6.1.4.1.890.1.5.12.42.10.51.2.1.7ColumndhcpRelay82RowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.12.42.10.51.2.1.8ColumndhcpRelay82Suboption2Enableread-createcurrentEnable/disable Option 82 sub-option 2.
1.3.6.1.4.1.890.1.5.12.42.10.51.2.1.9ColumndhcpRelay82Suboption2Inforead-createcurrentUser specified information for Option 82 sub-option 2.
1.3.6.1.4.1.890.1.5.12.42.10.51.2.1.10ColumndhcpRelay82EntryEnableread-createcurrentEnable/disable DHCP Relay
1.3.6.1.4.1.890.1.5.12.42.10.51.2.1.11ColumndhcpRelay82EntryOptionModeread-createcurrentOption82 format.
1.3.6.1.4.1.890.1.5.12.42.10.51.3ScalardhcpRelayOption82Sub1Inforead-writecurrentUser specific Option82 subOption1 (Agent circuit ID) information.
1.3.6.1.4.1.890.1.5.12.42.10.51.4ScalarmaxNumOfDhcpRelay82Confread-onlycurrentThe maximum number of rows that can be created in dhcpRelay82Table.
1.3.6.1.4.1.890.1.5.12.42.10.51.5ScalardhcpRelayOption82Sub1Enableread-writecurrentEnable/disable DHCP relay Option82 subOption1 (Agent Circuit ID) function.
1.3.6.1.4.1.890.1.5.12.42.10.51.6ScalardhcpRelayOption82Sub2Inforead-writecurrentUser specific Option82 subOption2 (Agent Remote ID) information.
1.3.6.1.4.1.890.1.5.12.42.10.51.7ScalardhcpRelayOption82Sub2Enableread-writecurrentEnable/disable DHCP relay Option82 subOption2 (Agent Remote ID) function.
1.3.6.1.4.1.890.1.5.12.42.10.53Nodemacfilter
1.3.6.1.4.1.890.1.5.12.42.10.53.1TablemacFilterPortTablenot-accessiblecurrentThis table includes the status of mac filtering for each port.
1.3.6.1.4.1.890.1.5.12.42.10.53.1.1RowmacFilterPortEntrynot-accessiblecurrentAn entry in macFilterPortTable.
1.3.6.1.4.1.890.1.5.12.42.10.53.1.1.1ColumnmacFilterPortEnableread-writecurrentEnable/disable MAC filtering for the port.
1.3.6.1.4.1.890.1.5.12.42.10.53.1.1.2ColumnmacFilterPortMacCountread-writecurrentThe total number of MAC addresses allowed for the port.
1.3.6.1.4.1.890.1.5.12.42.10.53.1.1.3ColumnmacFilterPortFilterModeread-writecurrentThe mac filter mode (accept or deny) for the port.
1.3.6.1.4.1.890.1.5.12.42.10.53.2ScalarmaxNumOfMacFiltersInSystemread-onlycurrentThe max number of mac filters supported in the system.
1.3.6.1.4.1.890.1.5.12.42.10.53.3ScalarmaxNumOfMacFiltersPerPortread-onlycurrentThe max number of mac filters supported per port.
1.3.6.1.4.1.890.1.5.12.42.10.53.4ScalarcurrNumOfMacFiltersInSystemread-onlycurrentThe current number of mac filters in the system.
1.3.6.1.4.1.890.1.5.12.42.10.53.5TablemacFilterTablenot-accessiblecurrentA table that contains the mac filter addresses.
1.3.6.1.4.1.890.1.5.12.42.10.53.5.1RowmacFilterEntrynot-accessiblecurrentThe entry of macFilterTable.
1.3.6.1.4.1.890.1.5.12.42.10.53.5.1.1ColumnmacFilterAddrread-onlycurrentThe mac address which can pass through or be rejected from the port.
1.3.6.1.4.1.890.1.5.12.42.10.53.5.1.2ColumnmacFilterRowStatusread-createcurrentThe row status of the entry.
1.3.6.1.4.1.890.1.5.12.42.10.53.6NodemacfilterBatchSet
1.3.6.1.4.1.890.1.5.12.42.10.53.6.1ScalarmacfilterTargetread-writecurrentThis managed object is used for identify the target on which the port configuration should be performed. The target is encoded as: Byte 1: 0, Reserved(chassis)…
1.3.6.1.4.1.890.1.5.12.42.10.53.6.2ScalarmacfilterOpsread-writecurrentThe corresponding bit is set to 1 to start the operation. The various bit positions are: BIT 1: enable mac filter BIT 2: enable mac count filter BIT 3: disable…
1.3.6.1.4.1.890.1.5.12.42.10.53.6.3ScalarmacFilterMacCountForBatchSetread-writecurrentThe total number of MAC addresses allowed for a port.
1.3.6.1.4.1.890.1.5.12.42.10.53.7TableouiFilterTablenot-accessiblecurrentA table that contains the OUI filter addresses.
1.3.6.1.4.1.890.1.5.12.42.10.53.7.1RowouiFilterEntrynot-accessiblecurrentThe entry of ouiFilterTable.
1.3.6.1.4.1.890.1.5.12.42.10.53.7.1.1ColumnouiFilterAddrread-onlycurrentThe first three bytes of the mac address which can pass through or be rejected from the port.
1.3.6.1.4.1.890.1.5.12.42.10.53.7.1.2ColumnouiFilterRowStatusread-createcurrentThe row status of the entry.
1.3.6.1.4.1.890.1.5.12.42.10.53.8ScalarmaxNumOfOuiFiltersPerPortread-onlycurrentThe max number of OUI filters supported per port.
1.3.6.1.4.1.890.1.5.12.42.10.53.9TableouiFilterPortTablenot-accessiblecurrentThis table includes the status of oui filtering for each port.
1.3.6.1.4.1.890.1.5.12.42.10.53.9.1RowouiFilterPortEntrynot-accessiblecurrentAn entry in macFilterPortTable.
1.3.6.1.4.1.890.1.5.12.42.10.53.9.1.1ColumnouiFilterPortEnableread-writecurrentEnable/disable oui filtering for the port.
1.3.6.1.4.1.890.1.5.12.42.10.53.9.1.2ColumnouiFilterPortFilterModeread-writecurrentThe oui filter mode (accept or deny) for the port.
1.3.6.1.4.1.890.1.5.12.42.10.55NodedhcpSnoop
1.3.6.1.4.1.890.1.5.12.42.10.55.1TabledhcpSnoopPortTablenot-accessiblecurrentThis table includes DHCP snooping enable/disable for each port.
1.3.6.1.4.1.890.1.5.12.42.10.55.1.1RowdhcpSnoopPortEntrynot-accessiblecurrentAn entry of dhcpSnoopPortTable.
1.3.6.1.4.1.890.1.5.12.42.10.55.1.1.1ColumndhcpSnoopEnableread-writecurrentEnable/disable DHCP snooping for a port.
1.3.6.1.4.1.890.1.5.12.42.10.55.2ScalardhcpSnoopTargetread-writecurrentThis managed object is used for identify the target on which the operation should be performed. The target is encoded as: Byte 1: the octet specifies a set of …
1.3.6.1.4.1.890.1.5.12.42.10.55.3ScalardhcpSnoopOpsread-writecurrentThe corresponding bit is set to 1 to start the operation. The various bit positions are: BIT 1: DHCP snooping table flush.
1.3.6.1.4.1.890.1.5.12.42.10.55.4TabledhcpStaticTablenot-accessiblecurrentThis table defines DHCP static IP addresses.
1.3.6.1.4.1.890.1.5.12.42.10.55.4.1RowdhcpStaticEntrynot-accessiblecurrentAn entry of dhcpStaticTable.
1.3.6.1.4.1.890.1.5.12.42.10.55.4.1.1ColumndhcpStaticIpAddrread-onlycurrentThe IP address which can pass through the port.
1.3.6.1.4.1.890.1.5.12.42.10.55.4.1.2ColumndhcpStaticRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.12.42.10.55.5ScalarmaxNumOfDhcpStaticIpread-onlycurrentThe maximum number of DHCP static IP addresses which can be created for a port.
1.3.6.1.4.1.890.1.5.12.42.10.56Nodeacl
1.3.6.1.4.1.890.1.5.12.42.10.56.1TableaclSetTablenot-accessiblecurrentaclsetTable.
1.3.6.1.4.1.890.1.5.12.42.10.56.1.1RowaclSetEntrynot-accessiblecurrentAn entry of aclSetTable.
1.3.6.1.4.1.890.1.5.12.42.10.56.1.1.1ColumnaclSetVpiread-onlycurrentVPI value
1.3.6.1.4.1.890.1.5.12.42.10.56.1.1.2ColumnaclSetVciread-onlycurrentVCI value
1.3.6.1.4.1.890.1.5.12.42.10.56.1.1.3ColumnaclSetProfileNameread-onlycurrentACL Profile name
1.3.6.1.4.1.890.1.5.12.42.10.56.1.1.4ColumnaclSetRowStatusread-writecurrentRowStatus of aclSetEntry
1.3.6.1.4.1.890.1.5.12.42.10.56.2TableaclProfileTablenot-accessiblecurrentaclProfileTable.
1.3.6.1.4.1.890.1.5.12.42.10.56.2.1RowaclProfileEntrynot-accessiblecurrentAn entry of aclProfileTable.
1.3.6.1.4.1.890.1.5.12.42.10.56.2.1.1ColumnaclProfileRuleNameread-onlycurrentProfile rule name
1.3.6.1.4.1.890.1.5.12.42.10.56.2.1.2ColumnaclProfileRuleNumberread-writecurrentThe managed object is for acl profile rule configuration. etype <etype> vlan <vid> (1), etype <etype> smac <mac> (2), etype <etype> dmac <mac> (3), vlan <vid> …
1.3.6.1.4.1.890.1.5.12.42.10.56.2.1.3ColumnaclProfileActionNumberread-writecurrentProfile action number. Bit 1: rate Bit 2: rvlan Bit 3: rpri Bit 4: deny Bit 1, Bit 2 & Bit 3 can multiple selection.
1.3.6.1.4.1.890.1.5.12.42.10.56.2.1.4ColumnaclProfileRuleParamMaskread-writecurrentProfile rule parameter mask. BIT 1: srcip <ip>/<mask> BIT 2: dstip <ip>/<mask> BIT 3: tos <stos> <etos> BIT 4: srcport <sport> <eport> BIT 5: dstport <sport> <…
1.3.6.1.4.1.890.1.5.12.42.10.56.2.1.5ColumnaclProfileRuleEtyperead-writecurrentProfile rule etype
1.3.6.1.4.1.890.1.5.12.42.10.56.2.1.6ColumnaclProfileRuleVidread-writecurrentProfile rule vid
1.3.6.1.4.1.890.1.5.12.42.10.56.2.1.7ColumnaclProfileRuleSmacread-writecurrentProfile rule source MAC
1.3.6.1.4.1.890.1.5.12.42.10.56.2.1.8ColumnaclProfileRuleDmacread-writecurrentProfile rule destination MAC
1.3.6.1.4.1.890.1.5.12.42.10.56.2.1.9ColumnaclProfileRulePriorityread-writecurrentProfile rule priority
1.3.6.1.4.1.890.1.5.12.42.10.56.2.1.10ColumnaclProfileRuleProtocolread-writecurrentProfile rule protocol. icmp(1),igmp(2),ip(4),tcp(6), udp(17),gre(47),ospf(89), other ptype
1.3.6.1.4.1.890.1.5.12.42.10.56.2.1.21ColumnaclProfileActionRateread-writecurrentProfile action to replace to this rate
1.3.6.1.4.1.890.1.5.12.42.10.56.2.1.22ColumnaclProfileActionrvlanread-writecurrentProfile action to replace to this vlan
1.3.6.1.4.1.890.1.5.12.42.10.56.2.1.23ColumnaclProfileActionrpriread-writecurrentProfile action to replace to this priority
1.3.6.1.4.1.890.1.5.12.42.10.56.2.1.24ColumnaclProfileRowStatusread-writecurrentThe row status of the entry.
1.3.6.1.4.1.890.1.5.12.42.10.56.2.1.25ColumnaclProfileRuleSipread-createcurrentSource IP.
1.3.6.1.4.1.890.1.5.12.42.10.56.2.1.26ColumnaclProfileRuleDipread-createcurrentDestination IP.
1.3.6.1.4.1.890.1.5.12.42.10.56.2.1.27ColumnaclProfileRuleSportread-createcurrentSource port.
1.3.6.1.4.1.890.1.5.12.42.10.56.2.1.28ColumnaclProfileRuleDportread-createcurrentDestination port.
1.3.6.1.4.1.890.1.5.12.42.10.57NodepppoeAgent
1.3.6.1.4.1.890.1.5.12.42.10.57.1TablepppoeAgentTablenot-accessiblecurrentA table that contains PPPoE DHCP Relay configuration.
1.3.6.1.4.1.890.1.5.12.42.10.57.1.1RowpppoeAgentEntrynot-accessiblecurrentAn entry of pppoeAgentTable.
1.3.6.1.4.1.890.1.5.12.42.10.57.1.1.1ColumnpppoeAgentEnableread-createcurrentEnable/disable DHCP relay and Option82 function.
1.3.6.1.4.1.890.1.5.12.42.10.57.1.1.2ColumnpppoeAgentInforead-createcurrentUser specific Option82 information.
1.3.6.1.4.1.890.1.5.12.42.10.57.1.1.3ColumnpppoeAgentRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.12.42.10.57.1.1.4ColumnpppoeAgentOptionModeread-createcurrentOption82 format.
1.3.6.1.4.1.890.1.5.12.42.10.57.2ScalarmaxNumOfPppoeDhcpRelay82Confread-onlycurrentThe maximum number of rows that can be created in pppoeAgentTable.
1.3.6.1.4.1.890.1.5.12.42.10.58Noden1mac
1.3.6.1.4.1.890.1.5.12.42.10.58.1Scalarn1macReplaceMacread-onlycurrentThis MAC address will be used to replace client's MAC address.
1.3.6.1.4.1.890.1.5.12.42.10.58.2Tablen1macPortTablenot-accessiblecurrentThe table contains N to 1 MAC configuration for DSL ports.
1.3.6.1.4.1.890.1.5.12.42.10.58.2.1Rown1macPortEntrynot-accessiblecurrentAn entry of n1macPortTable.
1.3.6.1.4.1.890.1.5.12.42.10.58.2.1.1Columnn1macStatusEnableread-writecurrentThe port status of n1mac function.
1.3.6.1.4.1.890.1.5.12.42.10.59NodeenetPort
1.3.6.1.4.1.890.1.5.12.42.10.59.1TableenetPortConfTablenot-accessiblecurrentThe table contains port configuration information in MSC1000.
1.3.6.1.4.1.890.1.5.12.42.10.59.1.1RowenetPortConfEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.42.10.59.1.1.1ColumnenetPortIdread-onlycurrentIdentity of the extension slot in MSC1000.
1.3.6.1.4.1.890.1.5.12.42.10.59.1.1.2ColumnenetPortTyperead-onlycurrentPort type of the extension slot in MSC1000.
1.3.6.1.4.1.890.1.5.12.42.10.59.1.1.3ColumnenetPortIfIndexread-onlycurrent
1.3.6.1.4.1.890.1.5.12.42.10.59.1.1.4ColumnenetPortSpeedread-writecurrent
1.3.6.1.4.1.890.1.5.12.42.10.60Nodemacff
1.3.6.1.4.1.890.1.5.12.42.10.60.1TablemacFfTablenot-accessiblecurrentA table that contains MAC Force Forwarding configuration.
1.3.6.1.4.1.890.1.5.12.42.10.60.1.1RowmacFfEntrynot-accessiblecurrentAn entry of macFfTable.
1.3.6.1.4.1.890.1.5.12.42.10.60.1.1.1ColumnmacFfIndexread-writecurrentIndex of the MACFF.
1.3.6.1.4.1.890.1.5.12.42.10.60.1.1.2ColumnmacFfVidread-writecurrentThe VLAN-ID refering to this AR/AS.
1.3.6.1.4.1.890.1.5.12.42.10.60.1.1.3ColumnmacFfArIPread-writecurrentIP of this AR/AS
1.3.6.1.4.1.890.1.5.12.42.10.60.1.1.4ColumnmacFfSrcIPread-writecurrentThe source IP address of the MACFF.
1.3.6.1.4.1.890.1.5.12.42.10.60.1.1.5ColumnmacFfSrcMaskread-writecurrentThe subnet mask of source IP mask.
1.3.6.1.4.1.890.1.5.12.42.10.60.1.1.6ColumnmacFfArMacread-onlycurrentMAC address of the AR or AS.
1.3.6.1.4.1.890.1.5.12.42.10.60.1.1.7ColumnmacFfRowStatusread-createcurrentThe row status of the MacFfEntry entry.
1.3.6.1.4.1.890.1.5.12.42.10.60.2ScalarmacFfArpAgingTimeread-writecurrentAR/AS ARP Aging time (second).
1.3.6.1.4.1.890.1.5.12.42.10.60.3ScalarmacFfArpFlushread-writecurrentSet the object to 1 to flush mac table.
1.3.6.1.4.1.890.1.5.12.42.10.61ScalarmanagementPriorityread-writecurrentThe default egress 801.1p priority for management.
1.3.6.1.4.1.890.1.5.12.42.10.62NodemacAntiSpoof
1.3.6.1.4.1.890.1.5.12.42.10.62.1ScalarmacAntiSpoofEnableread-writecurrentEnable/disable MAC anti-spoof.
1.3.6.1.4.1.890.1.5.12.42.11Nodesys
1.3.6.1.4.1.890.1.5.12.42.11.1NodesysState
1.3.6.1.4.1.890.1.5.12.42.11.1.1ScalarsystemStatusread-onlycurrentThis variable indicates the status of the system. The sysCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultan…
1.3.6.1.4.1.890.1.5.12.42.11.1.2ScalarproblemCauseread-onlycurrentIt describes the problem occurred in the system, e.g. maintenance operation failures, system reboot, error log, ...etc.
1.3.6.1.4.1.890.1.5.12.42.11.3NodehwMonitor
1.3.6.1.4.1.890.1.5.12.42.11.3.2TablevoltageTablenot-accessiblecurrentA table that contains voltage information about the system.
1.3.6.1.4.1.890.1.5.12.42.11.3.2.1RowvoltageEntrynot-accessiblecurrentA list of voltage information for each sensor.
1.3.6.1.4.1.890.1.5.12.42.11.3.2.1.1ColumnvoltageIndexread-onlycurrentThe identity of the sensor.
1.3.6.1.4.1.890.1.5.12.42.11.3.2.1.2ColumnvoltageCurValueread-onlycurrentThe current voltage detected by the sensor.
1.3.6.1.4.1.890.1.5.12.42.11.3.2.1.3ColumnvoltageMaxValueread-onlycurrentThe maximum voltage ever detected by the sensor.
1.3.6.1.4.1.890.1.5.12.42.11.3.2.1.4ColumnvoltageMinValueread-onlycurrentThe minimum voltage ever detected by the sensor.
1.3.6.1.4.1.890.1.5.12.42.11.3.2.1.5ColumnvoltageNominalValueread-onlycurrentThe nominal voltage which the power should supply.
1.3.6.1.4.1.890.1.5.12.42.11.3.2.1.6ColumnvoltageLowThreshread-writecurrentThe low threshold of the voltage. If the current voltage is less than the threshold, the device will initiate the voltageLow trap.
1.3.6.1.4.1.890.1.5.12.42.11.3.2.1.7ColumnvoltageDescrread-onlycurrentThe description of the voltage (e.g. location, nominal value, etc.).
1.3.6.1.4.1.890.1.5.12.42.11.3.3TabletemperatureTablenot-accessiblecurrentA table that contains temperature information.
1.3.6.1.4.1.890.1.5.12.42.11.3.3.1RowtemperatureEntrynot-accessiblecurrentA list of temperature information for each sensor.
1.3.6.1.4.1.890.1.5.12.42.11.3.3.1.1ColumntemperatureIndexread-onlycurrentThe identity of the sensor.
1.3.6.1.4.1.890.1.5.12.42.11.3.3.1.2ColumntemperatureCurValueread-onlycurrentThe current temperature detected by the sensor.
1.3.6.1.4.1.890.1.5.12.42.11.3.3.1.3ColumntemperatureMaxValueread-onlycurrentThe maximum temperature ever detected by the sensor.
1.3.6.1.4.1.890.1.5.12.42.11.3.3.1.4ColumntemperatureMinValueread-onlycurrentThe minimum temperature ever detected by the sensor.
1.3.6.1.4.1.890.1.5.12.42.11.3.3.1.5ColumntemperatureHighThreshread-writecurrentThe high threshold of the temperature. If the current temperature is higher than the threshold, the device will initiate the overheat trap.
1.3.6.1.4.1.890.1.5.12.42.11.3.3.1.6ColumntemperatureDescrread-onlycurrentThe description of the temperature sensor (e.g. location, function, etc.).
1.3.6.1.4.1.890.1.5.12.42.11.4NodetimeSetup
1.3.6.1.4.1.890.1.5.12.42.11.4.1ScalartimeServerModeread-writecurrentThe mechanism of Time Server when the system boots up.
1.3.6.1.4.1.890.1.5.12.42.11.4.2ScalartimeServerIPread-writecurrentThe IP Address of Time Server.
1.3.6.1.4.1.890.1.5.12.42.11.4.3ScalarsystemTimeread-writecurrentThe system time in the format 'HH:MM:SS'.
1.3.6.1.4.1.890.1.5.12.42.11.4.4ScalarsystemDateread-writecurrentThe system date in the format 'YYYY-MM-DD'
1.3.6.1.4.1.890.1.5.12.42.11.4.5ScalarsystemTimeZoneread-writecurrentThe system time zone.
1.3.6.1.4.1.890.1.5.12.42.11.4.6ScalartimeServerSyncread-writecurrentSet the object to 1 to synchronize with the time server.
1.3.6.1.4.1.890.1.5.12.42.11.4.7ScalartimeServerSyncStatusread-onlycurrentStatus description of the time server sync. result.
1.3.6.1.4.1.890.1.5.12.42.11.5NodeaccessCtrl
1.3.6.1.4.1.890.1.5.12.42.11.5.1TableaccessCtrlTablenot-accessiblecurrentA table that contains information about service access control.
1.3.6.1.4.1.890.1.5.12.42.11.5.1.1RowaccessCtrlEntrynot-accessiblecurrentA list of access control entry.
1.3.6.1.4.1.890.1.5.12.42.11.5.1.1.1ColumnaccessCtrlServiceread-onlycurrentThe service type of the access control entry.
1.3.6.1.4.1.890.1.5.12.42.11.5.1.1.2ColumnaccessCtrlEnableread-writecurrentEnable/disable the service.
1.3.6.1.4.1.890.1.5.12.42.11.5.1.1.3ColumnaccessCtrlPortread-writecurrentThe port number which the service uses.
1.3.6.1.4.1.890.1.5.12.42.11.5.2ScalarmaxNumOfSecuredClientsread-onlycurrentThe maximum number of sets of secured clients.
1.3.6.1.4.1.890.1.5.12.42.11.5.3TablesecuredClientTablenot-accessiblecurrentA table that contains information about secured clients.
1.3.6.1.4.1.890.1.5.12.42.11.5.3.1RowsecuredClientEntrynot-accessiblecurrentA list of secured client entry.
1.3.6.1.4.1.890.1.5.12.42.11.5.3.1.1ColumnsecuredClientIndexread-onlycurrentThe index of the entry.
1.3.6.1.4.1.890.1.5.12.42.11.5.3.1.2ColumnsecuredClientStartIpread-writecurrentThe starting IP address of the secured client set.
1.3.6.1.4.1.890.1.5.12.42.11.5.3.1.3ColumnsecuredClientEndIpread-writecurrentThe ending IP address of the secured client set.
1.3.6.1.4.1.890.1.5.12.42.11.5.3.1.4ColumnsecuredClientServiceread-writecurrentEach bit corresponds to a service. The bit is set to 1 if the service is enabled, and set to 0 if the service is disabled. The various bit positions are: BIT 1…
1.3.6.1.4.1.890.1.5.12.42.11.5.3.1.5ColumnsecuredClientEnableread-writecurrentEnable/disable the entry.
1.3.6.1.4.1.890.1.5.12.42.11.6Nodesyslog
1.3.6.1.4.1.890.1.5.12.42.11.6.1ScalarsysLogEnableread-writecurrentEnable/disable syslog function.
1.3.6.1.4.1.890.1.5.12.42.11.6.2ScalarsysLogServerread-writecurrentIP address of the syslog server.
1.3.6.1.4.1.890.1.5.12.42.11.6.3ScalarsysLogFacilityread-writecurrentLog facility used by the syslog function.
1.3.6.1.4.1.890.1.5.12.42.11.7Nodesnmp
1.3.6.1.4.1.890.1.5.12.42.11.7.1ScalarmaxNumberOfTrapDestinationsread-onlycurrentThe max number of the trap destinations.
1.3.6.1.4.1.890.1.5.12.42.11.7.2TablesnmpTrapDestTablenot-accessiblecurrentA table that contains SNMP trap destination information.
1.3.6.1.4.1.890.1.5.12.42.11.7.2.1RowsnmpTrapDestEntrynot-accessiblecurrentThe entry of SNMP trap destination table.
1.3.6.1.4.1.890.1.5.12.42.11.7.2.1.1ColumntrapDestIpread-onlycurrentThe IP address of the trap destination.
1.3.6.1.4.1.890.1.5.12.42.11.7.2.1.2ColumntrapDestPortread-onlycurrentThe UDP port of the trap destination.
1.3.6.1.4.1.890.1.5.12.42.11.7.2.1.3ColumntrapDestRowStatusread-createcurrentThe row status of the trap destination entry.
1.3.6.1.4.1.890.1.5.12.42.11.7.3ScalarsnmpGetCommunityread-writecurrentThe SNMP get community.
1.3.6.1.4.1.890.1.5.12.42.11.7.4ScalarsnmpSetCommunityread-writecurrentThe SNMP set community.
1.3.6.1.4.1.890.1.5.12.42.11.7.5ScalarsnmpTrapCommunityread-writecurrentThe SNMP trap community.
1.3.6.1.4.1.890.1.5.12.42.11.8NodeextAlarm
1.3.6.1.4.1.890.1.5.12.42.11.8.1TableextAlarmTablenot-accessiblecurrentA table that contains external alarm information.
1.3.6.1.4.1.890.1.5.12.42.11.8.1.1RowextAlarmEntrynot-accessiblecurrentThe entry of external alarm table.
1.3.6.1.4.1.890.1.5.12.42.11.8.1.1.1ColumnextAlarmIndexread-onlycurrentThe index of the entry.
1.3.6.1.4.1.890.1.5.12.42.11.8.1.1.2ColumnextAlarmNameread-writecurrentThe external alarm name.
1.3.6.1.4.1.890.1.5.12.42.11.8.1.1.3ColumnextAlarmStatusread-onlycurrentDispaly 'Normal' or 'Alarm' string
1.3.6.1.4.1.890.1.5.12.42.11.9Nodeuser
1.3.6.1.4.1.890.1.5.12.42.11.9.1ScalaruserAuthModeread-writecurrentUser authentication procsssing mode.
1.3.6.1.4.1.890.1.5.12.42.11.9.2ScalaruserAuthServerIpread-writecurrentThe IP address of the authentication server.
1.3.6.1.4.1.890.1.5.12.42.11.9.3ScalaruserAuthServerPortread-writecurrentThe port of the authentication server.
1.3.6.1.4.1.890.1.5.12.42.11.9.4ScalaruserAuthServerSecretread-writecurrentThe secret between the authentication server and the NE for authentication process.
1.3.6.1.4.1.890.1.5.12.42.11.9.5TableuserTablenot-accessiblecurrentA table that contains user information.
1.3.6.1.4.1.890.1.5.12.42.11.9.5.1RowuserEntrynot-accessiblecurrentAn entry of userTable.
1.3.6.1.4.1.890.1.5.12.42.11.9.5.1.1ColumnuserNameread-onlycurrentThe user name.
1.3.6.1.4.1.890.1.5.12.42.11.9.5.1.2ColumnuserPasswordread-createcurrentThe user password.
1.3.6.1.4.1.890.1.5.12.42.11.9.5.1.3ColumnuserPriviledgeread-createcurrentThe user priviledge to decide what operation the user can and cannot do.
1.3.6.1.4.1.890.1.5.12.42.11.9.5.1.4ColumnuserRowStatusread-createcurrentThe row status used to create or delete a user.
1.3.6.1.4.1.890.1.5.12.42.11.9.6ScalaruserAuthDefaultPriviledgeread-writecurrentThe user default priviledge to be assigned when radius authentication succeds but no user priviledge information(radius service-type) is provided.
1.3.6.1.4.1.890.1.5.12.42.11.10NodeusbCastCtrl
1.3.6.1.4.1.890.1.5.12.42.11.10.1ScalarusBcastCtrlEnableread-writecurrentEnable/disable upstream broadcast control.
1.3.6.1.4.1.890.1.5.12.42.11.10.2ScalarusBcastCtrlRateread-writecurrent
1.3.6.1.4.1.890.1.5.12.42.11.11Nodeinfo
1.3.6.1.4.1.890.1.5.12.42.11.11.1ScalarserialNumberread-onlycurrentThe Chassis Serial Number.
1.3.6.1.4.1.890.1.5.12.42.11.11.2ScalarmoduleDescrread-onlycurrentThe descriptions of the plug-in card.
1.3.6.1.4.1.890.1.5.12.42.11.11.3ScalarfWVersionread-onlycurrentThe firmware version of the plug-in card.
1.3.6.1.4.1.890.1.5.12.42.11.11.4ScalardriverVersionread-onlycurrentThe DSL driver of the plug-in card.
1.3.6.1.4.1.890.1.5.12.42.11.11.5ScalarmodemCodeVersionread-onlycurrentThe DSL modem code version of the plug-in card.
1.3.6.1.4.1.890.1.5.12.42.11.90NodesysMaintain
1.3.6.1.4.1.890.1.5.12.42.11.90.1ScalarmaintenanceOpsread-writecurrentThe managed object is for system maintenance. When the EMS wants to trigger the system maitenance operation, the EMS shall send SNMP-SET message to set the cor…
1.3.6.1.4.1.890.1.5.12.42.11.90.2ScalarmaintenanceTargetread-writecurrentThe managed object is used for identify the target on which the maintenance operation should be performed.
1.3.6.1.4.1.890.1.5.12.42.11.90.3ScalarmaintenanceDSLConfOpsread-writecurrentThe managed object is for xDSL line configuration. When the EMS wants to issue the desired operation, the EMS shall send SNMP-SET message to set the correspond…
1.3.6.1.4.1.890.1.5.12.42.11.90.4ScalarmaintenanceDSLConfTargetread-writecurrentThe managed object is used for identify the target on which the line configuration should be performed. The target is encoded as: Byte 1~6: each octet specifie…
1.3.6.1.4.1.890.1.5.12.42.11.90.5ScalarmaintenanceDSLConfProfileNameread-writecurrentThe DSL profile name
1.3.6.1.4.1.890.1.5.12.42.11.90.6ScalarmaintenanceDSLConfModeread-writecurrentThe DSL mode. The semantic for each bit is: Bit 1: ADSL, G.lite Bit 2: ADSL, G.dmt Bit 3: ADSL, T1.413 Bit 4: ADSL, Auto Bit 5: ADSL, ETSI Bit 6: ADSL2, Bit 7:…
1.3.6.1.4.1.890.1.5.12.42.11.90.7ScalarmaintenanceDSLConfPktFilterread-writecurrentThe packet filter. The semantic for each bit is: Bit 1: accept all Bit 2: accept PPPoE only Bit 3: reject ARP Bit 4: reject DHCP Bit 5: reject EAPOL Bit 6: rej…
1.3.6.1.4.1.890.1.5.12.42.11.90.8ScalarmaintenanceDSLConfDot1xControlread-writecurrentThe configuration defines the 802.1x control type.
1.3.6.1.4.1.890.1.5.12.42.11.90.9ScalarmaintenanceDSLConfDot1xReauthPeriodread-writecurrentThe configuration defines the 802.1x re-authentication period (seconds).
1.3.6.1.4.1.890.1.5.12.42.11.90.10ScalarmaintenanceDSLConfMacCountread-writecurrentThe configuration defines the number of mac addresses which can pass through the port.
1.3.6.1.4.1.890.1.5.12.42.11.90.11ScalarmaintenanceVpiread-writecurrentVPI of the channel
1.3.6.1.4.1.890.1.5.12.42.11.90.12ScalarmaintenanceVciread-writecurrentVCI of the channel
1.3.6.1.4.1.890.1.5.12.42.11.90.13ScalarmaintenanceDSLConfAlarmProfileNameread-writecurrentThe DSL alarm profile name
1.3.6.1.4.1.890.1.5.12.42.11.90.14ScalarmaintenanceDSLConfAnnexLread-writecurrentThe annex L setting of the ADSL line (Only in AnnexA).
1.3.6.1.4.1.890.1.5.12.42.11.90.15ScalarmaintenanceDSLConfPmModeread-writecurrentThe power management mode of the ADSL line.
1.3.6.1.4.1.890.1.5.12.42.11.90.16ScalarmaintenanceDSLConfRateModeread-writecurrentDefines what form of transmit rate adaptation is configured on this modem. See ADSL Forum TR-005 [3] for more information.
1.3.6.1.4.1.890.1.5.12.42.11.90.17ScalarmaintenanceDSLConfIgmpFilterread-writecurrentThe IGMP filter name.
1.3.6.1.4.1.890.1.5.12.42.12Nodetrap
1.3.6.1.4.1.890.1.5.12.42.12.1Nodeobject
1.3.6.1.4.1.890.1.5.12.42.12.1.2ScalareqptAlarmInputIndexread-onlycurrentThe index of alarm input.
1.3.6.1.4.1.890.1.5.12.42.12.1.8ScalareqptAlarmInputNameread-onlycurrentThe Name of alarm input.
1.3.6.1.4.1.890.1.5.12.42.12.1.9ScalarsysMacAntiSpoofOrigread-onlycurrentThe Original port of Mac-AntiSpoofing.
1.3.6.1.4.1.890.1.5.12.42.12.1.10ScalarsysMacAntiSpoofNewread-onlycurrentThe New port of Mac-AntiSpoofing.
1.3.6.1.4.1.890.1.5.12.42.12.1.11ScalarsysMacAntiSpoofMACread-onlycurrentThe MAC of Mac-AntiSpoofing.
1.3.6.1.4.1.890.1.5.12.42.12.3Nodeequipment
1.3.6.1.4.1.890.1.5.12.42.12.3.1NotificationeqptVoltageErrorcurrentThe volatge is under its low threshold.
1.3.6.1.4.1.890.1.5.12.42.12.3.2NotificationeqptVoltageNormalcurrentThe volatge is normal.
1.3.6.1.4.1.890.1.5.12.42.12.3.3NotificationeqptTempErrorcurrentThe temperature is over its high threshold.
1.3.6.1.4.1.890.1.5.12.42.12.3.4NotificationeqptTempNormalcurrentThe temperature is normal.
1.3.6.1.4.1.890.1.5.12.42.12.3.7NotificationeqptHWMonitorFailurecurrentHardware monitor diagnosis is failed.
1.3.6.1.4.1.890.1.5.12.42.12.3.8NotificationeqptExternalAlarmInputcurrentExternal alarm input.
1.3.6.1.4.1.890.1.5.12.42.12.3.9NotificationeqptExternalAlarmInputReleasecurrentExternal alarm input is released.
1.3.6.1.4.1.890.1.5.12.42.12.4Nodesystrap
1.3.6.1.4.1.890.1.5.12.42.12.4.1NotificationsysRebootcurrentSystem reboot.
1.3.6.1.4.1.890.1.5.12.42.12.4.2NotificationsysMacAntiSpoofingcurrentMAC Anti-spoofing.
1.3.6.1.4.1.890.1.5.12.42.13Nodestatistics
1.3.6.1.4.1.890.1.5.12.42.13.2NodeigmpStats
1.3.6.1.4.1.890.1.5.12.42.13.2.1ScalarigmpQueryCntTotalread-onlycurrentThe total number of IGMP query messages received.
1.3.6.1.4.1.890.1.5.12.42.13.2.2ScalarigmpReportCntTotalread-onlycurrentThe total number of IGMP report messages received.
1.3.6.1.4.1.890.1.5.12.42.13.2.3ScalarigmpLeaveCntTotalread-onlycurrentThe total number of IGMP leave messages received.
1.3.6.1.4.1.890.1.5.12.42.13.2.4ScalarigmpNumOfActiveGroupsread-onlycurrentThe total number of IGMP learned groups.
1.3.6.1.4.1.890.1.5.12.42.13.2.7TableigmpGroupV2Tablenot-accessiblecurrentA table that displays IGMP learned group member information.
1.3.6.1.4.1.890.1.5.12.42.13.2.7.1RowigmpGroupV2Entrynot-accessiblecurrentAn entry of igmpGroupV2Table.
1.3.6.1.4.1.890.1.5.12.42.13.2.7.1.1ColumnigmpGroupV2Vidread-onlycurrentThe IGMP group VLAN ID.
1.3.6.1.4.1.890.1.5.12.42.13.2.7.1.2ColumnigmpGroupV2Ipread-onlycurrentThe multicast IP address.
1.3.6.1.4.1.890.1.5.12.42.13.2.7.1.3ColumnigmpGroupV2NumOfMembersread-onlycurrentThe number of member ports in the group.
1.3.6.1.4.1.890.1.5.12.42.13.2.7.1.4ColumnigmpGroupV2MemberPortsread-onlycurrentThe member port list of the group.
1.3.6.1.4.1.890.1.5.12.42.13.2.8TableigmpGroupPortV2Tablenot-accessiblecurrentA table that displays IGMP joined groups in this port.
1.3.6.1.4.1.890.1.5.12.42.13.2.8.1RowigmpGroupPortV2Entrynot-accessiblecurrentAn entry of igmpGroupPortV2Table.
1.3.6.1.4.1.890.1.5.12.42.13.2.8.1.1ColumnigmpGroupPortV2Vidread-onlycurrentThe IGMP group VLAN ID.
1.3.6.1.4.1.890.1.5.12.42.13.2.8.1.2ColumnigmpGroupPortV2Ipread-onlycurrentThe multicast IP address.
1.3.6.1.4.1.890.1.5.12.42.13.2.8.1.3ColumnigmpGroupPortV2SourceIpread-onlycurrentThe source IP address that joins the IGMP group.
1.3.6.1.4.1.890.1.5.12.42.13.2.9TableigmpPortCtrlPduTablenot-accessiblecurrentA table that displays IGMP related counter values in this port.
1.3.6.1.4.1.890.1.5.12.42.13.2.9.1RowigmpPortCtrlPduEntrynot-accessiblecurrentAn entry of igmpPortCtrlPduTable.
1.3.6.1.4.1.890.1.5.12.42.13.2.9.1.1ColumnigmpPortCtrlPduQueryCntread-onlycurrentThe total number of IGMP query messages received in this port.
1.3.6.1.4.1.890.1.5.12.42.13.2.9.1.2ColumnigmpPortCtrlPduReportCntread-onlycurrentThe total number of IGMP report messages received in this port.
1.3.6.1.4.1.890.1.5.12.42.13.2.9.1.3ColumnigmpPortCtrlPduLeaveCntread-onlycurrentThe total number of IGMP leave messages received in this port.
1.3.6.1.4.1.890.1.5.12.42.13.2.9.1.4ColumnigmpPortNumOfActiveGroupsread-onlycurrentThe total number of active IGMP groups in this port.
1.3.6.1.4.1.890.1.5.12.42.13.8NodevdslStats
1.3.6.1.4.1.890.1.5.12.42.13.8.2TablevdslLineStatsTablenot-accessiblecurrentThe table displays VDSL line statistics. This table is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.12.42.13.8.2.1RowvdslLineStatsEntrynot-accessiblecurrentAn entry of vdslLineStatsTable.
1.3.6.1.4.1.890.1.5.12.42.13.8.2.1.1ColumnvdslLineStatsVtucBits1read-onlycurrentThe object provides Bits for the VTU-C 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15.
1.3.6.1.4.1.890.1.5.12.42.13.8.2.1.2ColumnvdslLineStatsVtucBits2read-onlycurrentThe object provides Bits for the VTU-C 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15.
1.3.6.1.4.1.890.1.5.12.42.13.8.2.1.3ColumnvdslLineStatsVtucBits3read-onlycurrentThe object provides Bits for the VTU-C 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15.
1.3.6.1.4.1.890.1.5.12.42.13.8.2.1.4ColumnvdslLineStatsVtucBits4read-onlycurrentThe object provides Bits for the VTU-C 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15.
1.3.6.1.4.1.890.1.5.12.42.13.8.2.1.5ColumnvdslLineStatsVturBits1read-onlycurrentThe object provides Bits for the VTU-R 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15.
1.3.6.1.4.1.890.1.5.12.42.13.8.2.1.6ColumnvdslLineStatsVturBits2read-onlycurrentThe object provides Bits for the VTU-R 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15.
1.3.6.1.4.1.890.1.5.12.42.13.8.2.1.7ColumnvdslLineStatsVturBits3read-onlycurrentThe object provides Bits for the VTU-R 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15.
1.3.6.1.4.1.890.1.5.12.42.13.8.2.1.8ColumnvdslLineStatsVturBits4read-onlycurrentThe object provides Bits for the VTU-R 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15.
1.3.6.1.4.1.890.1.5.12.42.13.8.2.1.9ColumnvdslLineStatsVtucGain1read-onlycurrentThe object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.890.1.5.12.42.13.8.2.1.10ColumnvdslLineStatsVtucGain2read-onlycurrentThe object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.890.1.5.12.42.13.8.2.1.11ColumnvdslLineStatsVtucGain3read-onlycurrentThe object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.890.1.5.12.42.13.8.2.1.12ColumnvdslLineStatsVtucGain4read-onlycurrentThe object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.890.1.5.12.42.13.8.2.1.13ColumnvdslLineStatsVtucGain5read-onlycurrentThe object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.890.1.5.12.42.13.8.2.1.14ColumnvdslLineStatsVtucGain6read-onlycurrentThe object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.890.1.5.12.42.13.8.2.1.15ColumnvdslLineStatsVtucGain7read-onlycurrentThe object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.890.1.5.12.42.13.8.2.1.16ColumnvdslLineStatsVtucGain8read-onlycurrentThe object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.890.1.5.12.42.13.8.2.1.17ColumnvdslLineStatsVturGain1read-onlycurrentThe object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.890.1.5.12.42.13.8.2.1.18ColumnvdslLineStatsVturGain2read-onlycurrentThe object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.890.1.5.12.42.13.8.2.1.19ColumnvdslLineStatsVturGain3read-onlycurrentThe object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.890.1.5.12.42.13.8.2.1.20ColumnvdslLineStatsVturGain4read-onlycurrentThe object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.890.1.5.12.42.13.8.2.1.21ColumnvdslLineStatsVturGain5read-onlycurrentThe object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.890.1.5.12.42.13.8.2.1.22ColumnvdslLineStatsVturGain6read-onlycurrentThe object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.890.1.5.12.42.13.8.2.1.23ColumnvdslLineStatsVturGain7read-onlycurrentThe object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.890.1.5.12.42.13.8.2.1.24ColumnvdslLineStatsVturGain8read-onlycurrentThe object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.890.1.5.12.42.13.8.2.1.25ColumnvdslLineStatsVtucHlogread-onlycurrentThe object provides Hlog for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The real Hlog(f) value is represented as (6-m(i)/1…
1.3.6.1.4.1.890.1.5.12.42.13.8.2.1.26ColumnvdslLineStatsVturHlogread-onlycurrentThe object provides Hlog for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The real Hlog(f) value is represented as (6-m(i)/1…
1.3.6.1.4.1.890.1.5.12.42.13.8.2.1.27ColumnvdslLineStatsVtucQlnread-onlycurrentThe object provides Qln for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The QLN(f) is represented as ( -23-n(i)/2), with n(…
1.3.6.1.4.1.890.1.5.12.42.13.8.2.1.28ColumnvdslLineStatsVturQlnread-onlycurrentThe object provides Qln for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The QLN(f) is represented as ( -23-n(i)/2), with n(…
1.3.6.1.4.1.890.1.5.12.42.13.8.2.1.29ColumnvdslLineStatsVtucSnrread-onlycurrentThe object provides Snr for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. Octet i is set to a value in the range 0 to 254 (-3…
1.3.6.1.4.1.890.1.5.12.42.13.8.2.1.30ColumnvdslLineStatsVturSnrread-onlycurrentThe object provides Snr for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. Octet i is set to a value in the range 0 to 254 (-3…
1.3.6.1.4.1.890.1.5.12.42.13.8.2.1.31ColumnvdslLineStatsVtucTssiread-onlycurrentThe object provides Tssi for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. Each value in this array is 16 bits wide. The tssi…
1.3.6.1.4.1.890.1.5.12.42.13.8.2.1.32ColumnvdslLineStatsVturTssiread-onlycurrentThe object provides Tssi for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. Each value in this array is 16 bits wide. The tssi…
1.3.6.1.4.1.890.1.5.12.42.13.8.2.1.33ColumnvdslLineStatsProtocolread-onlycurrentThe actual line protocol.
1.3.6.1.4.1.890.1.5.12.42.13.11NodedhcpStats
1.3.6.1.4.1.890.1.5.12.42.13.11.1TabledhcpSnoopIpTablenot-accessiblecurrentThis table shows the IP addresses and netmasks offered by the DHCP server.
1.3.6.1.4.1.890.1.5.12.42.13.11.1.1RowdhcpSnoopIpEntrynot-accessiblecurrentAn entry of dhcpSnoopIpTable.
1.3.6.1.4.1.890.1.5.12.42.13.11.1.1.1ColumndhcpSnoopIpread-onlycurrentThe snooped IP address.
1.3.6.1.4.1.890.1.5.12.42.13.11.1.1.2ColumndhcpSnoopMacread-onlycurrentThe snooped MAC address.
1.3.6.1.4.1.890.1.5.12.42.13.11.1.1.3ColumndhcpSnoopVidread-onlycurrentThe snooped VLAN ID.
1.3.6.1.4.1.890.1.5.12.42.13.11.2TabledhcpSnoopCounterTablenot-accessiblecurrentThis table shows the DHCP statistics.
1.3.6.1.4.1.890.1.5.12.42.13.11.2.1RowdhcpSnoopCounterEntrynot-accessiblecurrentAn entry of dhcpSnoopCounterTable.
1.3.6.1.4.1.890.1.5.12.42.13.11.2.1.1ColumndhcpDiscoveryread-onlycurrentThe total number of received DHCP server discovery packets.
1.3.6.1.4.1.890.1.5.12.42.13.11.2.1.2ColumndhcpOfferread-onlycurrentThe total number of received DHCP server offer packets.
1.3.6.1.4.1.890.1.5.12.42.13.11.2.1.3ColumndhcpRequestread-onlycurrentThe total number of received DHCP IP request packets.
1.3.6.1.4.1.890.1.5.12.42.13.11.2.1.4ColumndhcpAckread-onlycurrentThe total number of received DHCP IP acknowledge packets.
1.3.6.1.4.1.890.1.5.12.42.13.11.2.1.5ColumndhcpAckBySnoopFullread-onlycurrentThe total number of received DHCP IP acknowledge packets that replace the oldest snooping entry in snooping table due to table full.
1.3.6.1.4.1.890.1.5.12.42.13.12NodepaepvcStats
1.3.6.1.4.1.890.1.5.12.42.13.12.1TablepaepvcSessionTablenot-accessiblecurrentThis table shows the paepvc session statistics.
1.3.6.1.4.1.890.1.5.12.42.13.12.1.1RowpaepvcSessionEntrynot-accessiblecurrentAn entry of paepvcSessionTable.
1.3.6.1.4.1.890.1.5.12.42.13.12.1.1.1ColumnpaepvcSessionVpiread-onlycurrentThe PAEPVC VPI.
1.3.6.1.4.1.890.1.5.12.42.13.12.1.1.2ColumnpaepvcSessionVciread-onlycurrentThe PAEPVC VCI.
1.3.6.1.4.1.890.1.5.12.42.13.12.1.1.3ColumnpaepvcSessionStateread-onlycurrentThe PAEPVC status.
1.3.6.1.4.1.890.1.5.12.42.13.12.1.1.4ColumnpaepvcSessionIdread-onlycurrentThe PAEPVC session ID.
1.3.6.1.4.1.890.1.5.12.42.13.12.1.1.5ColumnpaepvcSessionUptimeread-onlycurrentThe PAEPVC session uptime.
1.3.6.1.4.1.890.1.5.12.42.13.12.1.1.6ColumnpaepvcSessionacnameread-onlycurrentAccess concentrator name.
1.3.6.1.4.1.890.1.5.12.42.13.12.1.1.7ColumnpaepvcSessionsrvcnameread-onlycurrentService name.
1.3.6.1.4.1.890.1.5.12.42.13.12.2TablepaepvcCountTablenot-accessiblecurrentThis table shows the paepvc counters.
1.3.6.1.4.1.890.1.5.12.42.13.12.2.1RowpaepvcCountEntrynot-accessiblecurrentAn entry of paepvcCountTable.
1.3.6.1.4.1.890.1.5.12.42.13.12.2.1.1ColumnpaepvcCountVpiread-onlycurrentThe PAEPVC VPI.
1.3.6.1.4.1.890.1.5.12.42.13.12.2.1.2ColumnpaepvcCountVciread-onlycurrentThe PAEPVC VCI.
1.3.6.1.4.1.890.1.5.12.42.13.12.2.1.3ColumnpaepvcCountPppLcpCfgReqRxread-onlycurrentThe number of ppp lcp config-request received.
1.3.6.1.4.1.890.1.5.12.42.13.12.2.1.4ColumnpaepvcCountPppLcpEchoReqRxread-onlycurrentThe number of ppp lcp echo-request received.
1.3.6.1.4.1.890.1.5.12.42.13.12.2.1.5ColumnpaepvcCountPppLcpEchoReplyRxread-onlycurrentThe number of ppp lcp echo-reply received.
1.3.6.1.4.1.890.1.5.12.42.13.12.2.1.6ColumnpaepvcCountPadiTxread-onlycurrentThe number of pppoe padi transfered
1.3.6.1.4.1.890.1.5.12.42.13.12.2.1.7ColumnpaepvcCountPadoRxread-onlycurrentThe number of pppoe pado received
1.3.6.1.4.1.890.1.5.12.42.13.12.2.1.8ColumnpaepvcCountPadrTxread-onlycurrentThe number of pppoe padr transfered
1.3.6.1.4.1.890.1.5.12.42.13.12.2.1.9ColumnpaepvcCountPadsRxread-onlycurrentThe number of pppoe pads received
1.3.6.1.4.1.890.1.5.12.42.13.12.2.1.10ColumnpaepvcCountPadtTxread-onlycurrentThe number of pppoe padt transfered
1.3.6.1.4.1.890.1.5.12.42.13.12.2.1.11ColumnpaepvcCountPadtRxread-onlycurrentThe number of pppoe padt received
1.3.6.1.4.1.890.1.5.12.42.13.12.2.1.12ColumnpaepvcCountSrvcnameErrRxread-onlycurrentThe number of pppoe service name error received
1.3.6.1.4.1.890.1.5.12.42.13.12.2.1.13ColumnpaepvcCountAcSystemErrRxread-onlycurrentThe number of pppoe access concentrator name error received
1.3.6.1.4.1.890.1.5.12.42.13.12.2.1.14ColumnpaepvcCountGenericErrTxread-onlycurrentThe number of pppoe generic error transfered
1.3.6.1.4.1.890.1.5.12.42.13.12.2.1.15ColumnpaepvcCountGenericErrRxread-onlycurrentThe number of pppoe generic error received
1.3.6.1.4.1.890.1.5.12.42.13.13NodemacStats
1.3.6.1.4.1.890.1.5.12.42.13.13.1ScalarmacDisplayTargetread-writecurrentThis managed object is a filter used for identify the target from which the MAC addresses are learned in macTable. The target could be: 99: all ports in the sy…
1.3.6.1.4.1.890.1.5.12.42.13.13.2TablemacTablenot-accessiblecurrentA table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the trans…
1.3.6.1.4.1.890.1.5.12.42.13.13.2.1RowmacEntrynot-accessiblecurrentAn entry of macTable.
1.3.6.1.4.1.890.1.5.12.42.13.13.2.1.1ColumnmacAddressread-onlycurrentA unicast MAC address for which the bridge has forwarding and/or filtering information.
1.3.6.1.4.1.890.1.5.12.42.13.13.2.1.2ColumnmacPortread-onlycurrentThe port from which the mac address has been learned.
1.3.6.1.4.1.890.1.5.12.42.13.13.2.1.3ColumnmacStatusread-onlycurrentThe status of this entry.
1.3.6.1.4.1.890.1.5.12.42.13.13.2.1.4ColumnmacVidread-onlycurrentThe vlan id of this entry.
1.3.6.1.4.1.890.1.5.12.42.13.13.3ScalarmacFlushread-writecurrentSet the object to 1 to flush mac table.
1.3.6.1.4.1.890.1.5.12.42.13.15Noden1macStats
1.3.6.1.4.1.890.1.5.12.42.13.15.1Tablen1macTablenot-accessiblecurrentA table that contains information about N to 1 MAC translation, including connection type, session id/IP and MAC address.
1.3.6.1.4.1.890.1.5.12.42.13.15.1.1Rown1macEntrynot-accessiblecurrentAn entry of n1macTable.
1.3.6.1.4.1.890.1.5.12.42.13.15.1.1.1Columnn1macProtoValread-onlycurrentThe protocol value of specified connection. If the connection is pppoe/pppoaoe, the value stands for session id; if the connection is ipoe/ipoaoe, the value me…
1.3.6.1.4.1.890.1.5.12.42.13.15.1.1.2Columnn1macProtoTyperead-onlycurrentProtocol type of the connection which the MAC is translated.
1.3.6.1.4.1.890.1.5.12.42.13.15.1.1.3Columnn1macMacAddrread-onlycurrentThe translated MAC address.
1.3.6.1.4.1.890.1.5.12.42.13.16NodeenetStats
1.3.6.1.4.1.890.1.5.12.42.13.16.1ScalarenetPrimaryPortread-onlycurrentIfIndex is used for identifying the Primary Ethernet Port when dot3ad is disabled.
1.3.6.1.4.1.890.1.5.12.42.14Nodeclear
1.3.6.1.4.1.890.1.5.12.42.14.1ScalarcounterClearTargetread-writecurrentThis managed object is used for identify the target on which the counter would be cleared. The target is encoded as: Byte 1: reserved Byte 2~3: reserved Byte 4…
1.3.6.1.4.1.890.1.5.12.42.14.2ScalarcounterClearOpsread-writecurrentThe corresponding bit is set to 1 to start the operation. The various bit positions are: BIT 1: clear interface counters BIT 2: clear pvc packet counters BIT 3…
1.3.6.1.4.1.890.1.5.12.42.14.3ScalarcounterClearVpiread-writecurrentVPI of the pvc whose counters would be cleared.
1.3.6.1.4.1.890.1.5.12.42.14.4ScalarcounterClearVciread-writecurrentVCI of the pvc whose counters would be cleared.
MIB Viewer