ZYXEL-VLAN-STACK-MIB
18 objects
The subtree for VLAN Stack
Imported Objects
| BRIDGE-MIB | dot1dBasePort |
| P-BRIDGE-MIB | -- RFC2579 EnabledStatus |
| SNMPv2-SMI | -- RFC2578 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | -- RFC2578 RowStatus -- RFC2579 DisplayString |
| ZYXEL-ES-SMI | esMgmt |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.890.1.15.3.89 | IdentityzyxelVlanStack | The subtree for VLAN Stack | ||
| 1.3.6.1.4.1.890.1.15.3.89.1 | NodezyxelVlanStackSetup | |||
| 1.3.6.1.4.1.890.1.15.3.89.1.1 | ScalarzyVlanStackState | read-write | current | Enable/Disable VLAN Stacking for the switch. |
| 1.3.6.1.4.1.890.1.15.3.89.1.2 | TablezyxelVlanStackPortTable | not-accessible | current | The table contains VLAN stack configuration. |
| 1.3.6.1.4.1.890.1.15.3.89.1.2.1 | RowzyxelVlanStackPortEntry | not-accessible | current | An entry contains VLAN stack configuration. |
| 1.3.6.1.4.1.890.1.15.3.89.1.2.1.1 | ColumnzyVlanStackPortMode | read-write | current | VLAN stacking mode of the port: Set Normal mode to have the switch ignore frames received(or transmitted) on this port with VLAN stacking tags. Set Access mode… |
| 1.3.6.1.4.1.890.1.15.3.89.1.2.1.2 | ColumnzyVlanStackPortVid | read-write | current | Stacking port VLAN ID is the service provider's VLAN ID (the outer VLAN tag). Set the service provider ID (from 1 to 4094) for frames received on this port. |
| 1.3.6.1.4.1.890.1.15.3.89.1.2.1.3 | ColumnzyVlanStackPortPriority | read-write | current | Set a priority level (from 0 to 7). This is the service provider's priority level that adds to the frames received on this port. 0 is the lowest priority level… |
| 1.3.6.1.4.1.890.1.15.3.89.1.2.1.4 | ColumnzyVlanStackTunnelPortTpid | read-write | current | TPID is a standard Ethernet type code identifying the frame and indicates whether the frame carries IEEE 802.1Q tag information. Set a four-digit hexadecimal n… |
| 1.3.6.1.4.1.890.1.15.3.89.1.3 | ScalarzySelectiveQinQMaxNumberOfRules | read-only | current | The maximum number of selective Q-in-Q that can be created. |
| 1.3.6.1.4.1.890.1.15.3.89.1.4 | TablezyxelSelectiveQinQTable | not-accessible | current | The table contains selective Q-in-Q configuration. |
| 1.3.6.1.4.1.890.1.15.3.89.1.4.1 | RowzyxelSelectiveQinQEntry | not-accessible | current | An entry contains selective Q-in-Q configuration. |
| 1.3.6.1.4.1.890.1.15.3.89.1.4.1.1 | ColumnzySelectiveQinQName | read-write | current | Set the name of selective Q-in-Q entry. |
| 1.3.6.1.4.1.890.1.15.3.89.1.4.1.2 | ColumnzySelectiveQinQPort | not-accessible | current | Interface port ID. |
| 1.3.6.1.4.1.890.1.15.3.89.1.4.1.3 | ColumnzySelectiveQinQCvid | not-accessible | current | The customer VLAN ID (the inner VLAN tag) from 1 to 4094. This is the VLAN tag carried in the packets from the subscribers. |
| 1.3.6.1.4.1.890.1.15.3.89.1.4.1.4 | ColumnzySelectiveQinQSpvid | read-write | current | Stacking port VLAN ID is the service provider's VLAN ID (the outer VLAN tag). Set the service provider ID (from 1 to 4094) for frames received on this port. |
| 1.3.6.1.4.1.890.1.15.3.89.1.4.1.5 | ColumnzySelectiveQinQPriority | read-write | current | Set a priority level (from 0 to 7). This is the service provider's priority level that adds to the frames received on this port. 0 is the lowest priority level… |
| 1.3.6.1.4.1.890.1.15.3.89.1.4.1.6 | ColumnzySelectiveQinQRowStatus | read-create | current | This object allows entries to be created and deleted from the selective Q-in-Q table |