MIB Viewer

ZYXEL-VRRP-MIB

27 objects
The subtree for Virtual Router Redundancy Protocol (VRRP)
Imported Objects
P-BRIDGE-MIB-- RFC2579 EnabledStatus
SNMPv2-SMI-- RFC2578 MODULE-IDENTITY IpAddress OBJECT-TYPE
SNMPv2-TC-- RFC2578 RowStatus DisplayString
ZYXEL-ES-SMIesMgmt
ZYXEL-IP-FORWARD-MIBzyRouteDomainIpAddress zyRouteDomainIpMaskBits
OIDNameAccessStatusDescription
1.3.6.1.4.1.890.1.15.3.91IdentityzyxelVrrpThe subtree for Virtual Router Redundancy Protocol (VRRP)
1.3.6.1.4.1.890.1.15.3.91.1NodezyxelVrrpSetup
1.3.6.1.4.1.890.1.15.3.91.1.1ScalarzyVrrpMaxNumberOfVirtualRoutersread-onlycurrentThe maximum number of virtual routers that can be created.
1.3.6.1.4.1.890.1.15.3.91.1.2TablezyxelVrrpTablenot-accessiblecurrentThe table contains VRRP configuration.
1.3.6.1.4.1.890.1.15.3.91.1.2.1RowzyxelVrrpEntrynot-accessiblecurrentAn entry contains VRRP configuration.
1.3.6.1.4.1.890.1.15.3.91.1.2.1.1ColumnzyVrrpVirtualIdnot-accessiblecurrentEnter a virtual router number for which this VRRP entry is created. You can configure up to seven virtual routers for one network.
1.3.6.1.4.1.890.1.15.3.91.1.2.1.2ColumnzyVrrpUplinkGatewaynot-accessiblecurrentIP address of the uplink gateway in dotted decimal notation.
1.3.6.1.4.1.890.1.15.3.91.1.2.1.3ColumnzyVrrpPreemptStateread-writecurrentEnable/Disable preempt mode
1.3.6.1.4.1.890.1.15.3.91.1.2.1.4ColumnzyVrrpIntervalread-writecurrentSpecify the number of seconds between hello message transmissions. The default is 1.
1.3.6.1.4.1.890.1.15.3.91.1.2.1.5ColumnzyVrrpPriorityread-writecurrentSet the priority level. The number is bigger, the priority is higher.
1.3.6.1.4.1.890.1.15.3.91.1.2.1.6ColumnzyVrrpPrimaryVirtualpAddressread-writecurrentThe IP address of the primary virtual router in dotted decimal notation.
1.3.6.1.4.1.890.1.15.3.91.1.2.1.7ColumnzyVrrpNameread-writecurrentA descriptive name for identification purposes
1.3.6.1.4.1.890.1.15.3.91.1.2.1.8ColumnzyVrrpSecondaryVirtualIpAddressread-writecurrentThis is optional. The IP address of a secondary virtual router in dotted decimal notation.
1.3.6.1.4.1.890.1.15.3.91.1.2.1.9ColumnzyVrrpPingStateread-writecurrentEnable/Disable virtual router to response ping.
1.3.6.1.4.1.890.1.15.3.91.1.2.1.10ColumnzyVrrpRowStatusread-createcurrentThis object allows entries to be created and deleted from the VRRP table.
1.3.6.1.4.1.890.1.15.3.91.1.3TablezyxelVrrpDomainTablenot-accessiblecurrentThe table contains VRRP domain configuration.
1.3.6.1.4.1.890.1.15.3.91.1.3.1RowzyxelVrrpDomainEntrynot-accessiblecurrentAn entry contains VRRP domain configuration.
1.3.6.1.4.1.890.1.15.3.91.1.3.1.1ColumnzyVrrpDomainAuthenticationTyperead-writecurrentSelect None to disable authentication. This is the default setting. Select Simple to use a simple password to authenticate VRRP packet exchanges on this interf…
1.3.6.1.4.1.890.1.15.3.91.1.3.1.2ColumnzyVrrpDomainAuthenticationKeyread-writecurrentWhen you select simple in the authentication field, enter a password key in this field
1.3.6.1.4.1.890.1.15.3.91.2NodezyxelVrrpStatus
1.3.6.1.4.1.890.1.15.3.91.2.1TablezyxelVrrpInfoTablenot-accessiblecurrentThe table contains VRRP information.
1.3.6.1.4.1.890.1.15.3.91.2.1.1RowzyxelVrrpInfoEntrynot-accessiblecurrentAn entry contains VRRP information.
1.3.6.1.4.1.890.1.15.3.91.2.1.1.1ColumnzyVrrpInfoIpAddressnot-accessiblecurrentThe IP address of an IP routing domain that is associated to a virtual router.
1.3.6.1.4.1.890.1.15.3.91.2.1.1.2ColumnzyVrrpInfoIpMaskBitsnot-accessiblecurrentThe subnet mask bits of an IP routing domain that is associated to a virtual router.
1.3.6.1.4.1.890.1.15.3.91.2.1.1.3ColumnzyVrrpInfoVirtualIdnot-accessiblecurrentDisplay the ID number of the virtual router.
1.3.6.1.4.1.890.1.15.3.91.2.1.1.4ColumnzyVrrpInfoVirtualRouterStatusread-onlycurrentDisplay the status of the virtual router.
1.3.6.1.4.1.890.1.15.3.91.2.1.1.5ColumnzyVrrpInfoUplinkStatusread-onlycurrentDisplay the status of the link between this switch and the uplink gateway.