ZhoneDsl-MIB
56 objects
The MIB module to describe the Zhone specific implementation of HDSL, HDSL2, SDSL and G.SHDSL
Imported Objects
| IF-MIB | ifIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | VariablePointer |
| Zhone | zhoneDsl zhoneModules |
| Zhone-TC | ZhoneAdminString ZhoneRowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5504.5.4.1 | TablezhoneDslLineTable | not-accessible | current | This table contains common attributes describing DSL physical line interfaces for DSLs without a MIB standard. |
| 1.3.6.1.4.1.5504.5.4.1.1 | RowzhoneDslLineEntry | not-accessible | current | An entry in the zhoneDslLine Table. |
| 1.3.6.1.4.1.5504.5.4.1.1.1 | ColumnzhoneDslLineType | read-create | current | The DSL type. Many modem vendors allow software selection between HDSL, HDSL2, SDSL and SHDSL. Using zhoneDslLineTypeSupported the user can see what dsl option… |
| 1.3.6.1.4.1.5504.5.4.1.1.2 | ColumnzhoneDslLineCapabilities | read-only | current | The DSL types supported on this interface. This is a bit-map of possible types. This variable can be used to determine zhoneDslLineType. |
| 1.3.6.1.4.1.5504.5.4.1.1.3 | ColumnzhoneDslLineStatus | read-only | current | The DSL modem status. Detailed modem state maybe available in the status table. |
| 1.3.6.1.4.1.5504.5.4.1.1.4 | ColumnzhoneDslUpLineRate | read-only | current | The DSL upstream (cpe->co) line rate on this interface. |
| 1.3.6.1.4.1.5504.5.4.1.1.5 | ColumnzhoneDslDownLineRate | read-only | current | The DSL downstream (co->cpe) line rate on this interface. |
| 1.3.6.1.4.1.5504.5.4.1.1.6 | ColumnzhoneDslLineConfigProfile | read-create | current | The value of this object identifies the row in the respective dsl configuration profile table. (Ex: if zhoneDslLineType is HDSL2, then the profile identifies a… |
| 1.3.6.1.4.1.5504.5.4.1.1.7 | ColumnzhoneDslLineAlarmProfile | read-create | current | The value of this object identifies the row in the respective dsl alarm profile table. (Ex: if zhoneDslLineType is HDSL2 then the profile identifies an HDSL2 a… |
| 1.3.6.1.4.1.5504.5.4.1.1.8 | ColumnzhoneDslLineRowStatus | read-write | current | Row status in order to add an entry in this table. The required fields to be added are: (ARE ALL THE DEFAULTS OKAY) |
| 1.3.6.1.4.1.5504.5.4.3 | TablezhoneHdsl2ConfigProfileTable | not-accessible | current | This table contains information for HDSL2 configuration. |
| 1.3.6.1.4.1.5504.5.4.3.1 | RowzhoneHdsl2ConfigProfileEntry | not-accessible | current | An entry in the zhoneHdsl2ConfigProfile Table. |
| 1.3.6.1.4.1.5504.5.4.3.1.1 | ColumnzhoneHdsl2ConfigProfileName | not-accessible | current | Configuration profile name. Used by the zhoneHdsl2LineConfigProfile entry to map zhoneDslLine Entry to the appropriate profile. When `dynamic' profiles are imp… |
| 1.3.6.1.4.1.5504.5.4.3.1.2 | ColumnzhoneHdsl2ConfigUnitMode | read-create | current | Unit is configured as the CO(central office)or CPE (customer premise)side. |
| 1.3.6.1.4.1.5504.5.4.3.1.3 | ColumnzhoneHdsl2ConfigTransmitPowerbackoffMode | read-create | current | Determines if the transmit power backoff defined in HDSL2 standard is used. |
| 1.3.6.1.4.1.5504.5.4.3.1.4 | ColumnzhoneHdsl2ConfigDecoderCoeffA | read-create | current | 21 bit value corresponding to the decoder coefficient A. The default is the ANSI HDSL2 default. |
| 1.3.6.1.4.1.5504.5.4.3.1.5 | ColumnzhoneHdsl2ConfigDecoderCoeffB | read-create | current | 21 bit value corresponding to the decoder coefficient A. The default is the ANSI HDSL2 default. |
| 1.3.6.1.4.1.5504.5.4.3.1.6 | ColumnzhoneHdsl2ConfigFrameSyncWord | read-create | current | 10 bit frame sync word. The default is the HDSL2 standard. |
| 1.3.6.1.4.1.5504.5.4.3.1.7 | ColumnzhoneHdsl2ConfigStuffBits | read-create | current | 4 bit stuff pattern. The default is the HDSL2 standard. |
| 1.3.6.1.4.1.5504.5.4.3.1.8 | ColumnzhoneHdsl2ConfigRowStatus | read-create | current | Status in order to create/delete rows. For creation the following fields are required: |
| 1.3.6.1.4.1.5504.5.4.4 | TablezhoneHdsl2StatusTable | not-accessible | current | This table contains HDSL2 specific line status information. An entry into this table is automatically created whenever a zhoneDslLineEntry is created and the t… |
| 1.3.6.1.4.1.5504.5.4.4.1 | RowzhoneHdsl2StatusEntry | not-accessible | current | An entry in the zhoneHdsl2Status Table. |
| 1.3.6.1.4.1.5504.5.4.4.1.1 | ColumnzhoneHdsl2DriftAlarm | read-only | current | Indicates that the framer automatically attempted to adjust for clock drift. This is not applicable for ATM. |
| 1.3.6.1.4.1.5504.5.4.4.1.2 | ColumnzhoneHdsl2FramerIBStatus | read-only | current | Returns the segd,sega,uib and losd bits. The format of the octet is: x x x x segd sega uib losd. |
| 1.3.6.1.4.1.5504.5.4.4.1.3 | ColumnzhoneHdsl2LocalPSDMaskStatus | read-only | current | Returns a number corresponding to the transmit power backoff requested by the local unit. |
| 1.3.6.1.4.1.5504.5.4.4.1.4 | ColumnzhoneHdsl2LoopAttenuation | read-only | current | Estimation of the loop attenuation in tenths of a DB. by the local unit. |
| 1.3.6.1.4.1.5504.5.4.4.1.5 | ColumnzhoneHdsl2LossWordStatus | read-only | current | This indicates loss of sync. |
| 1.3.6.1.4.1.5504.5.4.4.1.6 | ColumnzhoneHdsl2RmtPSDMaskStatus | read-only | current | Returns a number corresponding to the transmit power backoff requested by the remote unit. |
| 1.3.6.1.4.1.5504.5.4.4.1.7 | ColumnzhoneHdsl2RmtCountryCode | read-only | current | ANSI HDSL2 Country code of the remote unit. |
| 1.3.6.1.4.1.5504.5.4.4.1.8 | ColumnzhoneHdsl2RmtVersion | read-only | current | HDSL2 version of the remote unit. |
| 1.3.6.1.4.1.5504.5.4.4.1.9 | ColumnzhoneHdsl2RmtProviderCode | read-only | current | Provider word of the remote unit. |
| 1.3.6.1.4.1.5504.5.4.4.1.10 | ColumnzhoneHdsl2RmtVendorData | read-only | current | The remote unit's vendor-provided data. |
| 1.3.6.1.4.1.5504.5.4.4.1.11 | ColumnzhoneHdsl2RmtTxEncoderA | read-only | current | The remote unit's 21 bit encoder coefficient A |
| 1.3.6.1.4.1.5504.5.4.4.1.12 | ColumnzhoneHdsl2RmtTxEncoderB | read-only | current | The remote unit's 21 bit encoder coefficient B |
| 1.3.6.1.4.1.5504.5.4.4.1.13 | ColumnzhoneHdsl2TipRingStatus | read-only | current | Indicates whether the tip and ring points from the local unit match the tip and ring points of the remote. |
| 1.3.6.1.4.1.5504.5.4.4.1.14 | ColumnzhoneHdsl2FrameSyncWord | read-only | current | A 10 bit number indicating the frame sync word used. LSB justified |
| 1.3.6.1.4.1.5504.5.4.4.1.15 | ColumnzhoneHdsl2StuffBits | read-only | current | A 4 bit number for the stuff bits. LSB justified. |
| 1.3.6.1.4.1.5504.5.4.5 | TablezhoneDslPerfDataTable | not-accessible | current | This table provides one row for each modem interface. |
| 1.3.6.1.4.1.5504.5.4.5.1 | RowzhoneDslPerfDataEntry | not-accessible | current | An entry in zhoneDslPerfDataTable. |
| 1.3.6.1.4.1.5504.5.4.5.1.1 | ColumnzhoneDslPerfLofs | read-only | current | Count of the number of Loss of Framing failures since agent reset. |
| 1.3.6.1.4.1.5504.5.4.5.1.2 | ColumnzhoneDslPerfLoss | read-only | current | Count of the number of Loss of Signal failures since agent reset. |
| 1.3.6.1.4.1.5504.5.4.5.1.3 | ColumnzhoneDslPerfLols | read-only | current | Count of the number of Loss of Link failures since agent reset. |
| 1.3.6.1.4.1.5504.5.4.5.1.4 | ColumnzhoneDslPerfInits | read-only | current | Count of the line initialization attempts since agent reset. Includes both successful and failed attempts. |
| 1.3.6.1.4.1.5504.5.4.5.1.5 | ColumnzhoneDslPerfCur15MinTimeElapsed | read-only | current | The number of seconds elapsed since the start of the current measurement period. |
| 1.3.6.1.4.1.5504.5.4.5.1.6 | ColumnzhoneDslPerfCur15MinLofs | read-only | current | Count of the number of Loss of Framing failures in the current 15 minute interval. |
| 1.3.6.1.4.1.5504.5.4.5.1.7 | ColumnzhoneDslPerfCur15MinLoss | read-only | current | Count of seconds in the current 15 minute interval when there was a Loss of Signal. |
| 1.3.6.1.4.1.5504.5.4.5.1.8 | ColumnzhoneDslPerfCur15MinLols | read-only | current | Count of seconds in the current 15 minute interval when there was of Loss of Link. |
| 1.3.6.1.4.1.5504.5.4.5.1.9 | ColumnzhoneDslPerfCur15MinInits | read-only | current | Count of the line initialization attempts in the current 15 minute interval. Includes both successful and failed attempts. |
| 1.3.6.1.4.1.5504.5.4.6 | TablezhoneDslAlarmProfileTable | not-accessible | current | This table contains information for Alarm conditions. One entry in this table reflects a profile defined by a manager which can be used to define alarm conditi… |
| 1.3.6.1.4.1.5504.5.4.6.1 | RowzhoneDslAlarmProfileEntry | not-accessible | current | An entry in the zhoneDslAlarmProfile Table. |
| 1.3.6.1.4.1.5504.5.4.6.1.1 | ColumnzhoneDslAlarmProfileName | not-accessible | current | Configuration profile name. Used by the zhoneDslLineConfigProfile entry to map zhoneDslLine Entry to the appropriate profile. When `dynamic' profiles are imple… |
| 1.3.6.1.4.1.5504.5.4.6.1.2 | ColumnzhoneDslThreshold15MinLoss | read-create | current | The number of Loss of signal seconds on a DSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send a T… |
| 1.3.6.1.4.1.5504.5.4.6.1.3 | ColumnzhoneDslThreshold15MinLols | read-create | current | The number of Loss of link seconds on a DSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send a TRA… |
| 1.3.6.1.4.1.5504.5.4.6.1.4 | ColumnzhoneDslThreshold15MinLofs | read-create | current | The number of Loss of framing seconds on a DSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send a … |
| 1.3.6.1.4.1.5504.5.4.6.1.5 | ColumnzhoneDslAlarmProfileRowStatus | read-write | current | RowStatus field to control deletion/addition of entries in this table. Minimal fields to be 'set' for a creation is: |
| 1.3.6.1.4.1.5504.6.3 | IdentityzhoneDsl-MIB | The MIB module to describe the Zhone specific implementation of HDSL, HDSL2, SDSL and G.SHDSL |