ZhoneV52-MIB
132 objects
The MIB module to describe objects for V5.2.
Imported Objects
| PerfHist-TC-MIB | PerfCurrentCount |
| SNMPv2-SMI | Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | TruthValue |
| Zhone | zhoneVoice |
| Zhone-TC | ZhoneAdminString ZhoneRowStatus ZhoneShelfValue ZhoneShelfValueOrZero ZhoneSlotValue ZhoneSlotValueOrZero |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5504.4.3.2 | IdentityzhoneV52 | The MIB module to describe objects for V5.2. | ||
| 1.3.6.1.4.1.5504.4.3.2.1 | Tablev52InterfaceGroupTable | not-accessible | current | V5.2 Interface Group table. A V5.2 interface contains 1-16 E1 links. The protocols defined in the ETSI V5.2 specification (ETS 300 347-1) are carried across th… |
| 1.3.6.1.4.1.5504.4.3.2.1.1 | Rowv52InterfaceGroupEntry | not-accessible | current | An entry in the v52InterfaceBundleTable |
| 1.3.6.1.4.1.5504.4.3.2.1.1.1 | Columnv52IgNameId | not-accessible | current | The Interface Group name is a system-wide unique symbolic name that is used for call routing. The maximum length for this name is 32 characters. |
| 1.3.6.1.4.1.5504.4.3.2.1.1.2 | Columnv52IgShelf | read-only | current | The shelf where this Interface and V5.2 stack resides. Range of valid values is 1-255. Note 0 is an invalid value. |
| 1.3.6.1.4.1.5504.4.3.2.1.1.3 | Columnv52IgSlot | read-only | current | The shelf where this Interface and V5.2 stack resides. Range of valid values is 1-17. Note 0 is an invalid value. |
| 1.3.6.1.4.1.5504.4.3.2.1.1.4 | Columnv52IgPeerShelf | read-only | current | The shelf where this Redundancy Group's peer (or standby) resides. Peer shelf and peer slot define where this peer Interface Group and V5.2 stack resides. Rang… |
| 1.3.6.1.4.1.5504.4.3.2.1.1.5 | Columnv52IgPeerSlot | read-only | current | The slot where this Interface Group's peer (or standby) resides. Peer shelf and peer slot define where this Interface Group peer and V5.2 stack resides. Range … |
| 1.3.6.1.4.1.5504.4.3.2.1.1.6 | Columnv52IgPeerStatus | read-only | current | The status of the peer (or standby) Interface Group Valid peer status values are: * noStandbyConfigured * configuredAndAvailable * configuredAndUnavailable |
| 1.3.6.1.4.1.5504.4.3.2.1.1.7 | Columnv52IgLocalInterfaceId | read-create | current | 24-bit AN side V5.2 Interface identifier provisioned. Valid range is 0..16777215. |
| 1.3.6.1.4.1.5504.4.3.2.1.1.8 | Columnv52IgRemoteInterfaceId | read-only | current | 24-bit LE side V5.2 Interface identifier provisioned. This is read only can only be updated indirectly by setting v52IgProvVariantRequest to requestFromLe. Val… |
| 1.3.6.1.4.1.5504.4.3.2.1.1.9 | Columnv52IgLocalProvVariant | read-create | current | AN side provisioning variant used to differentiate variations in configuration. This is provisioned by the user. Valid range is 0..127. Default is 0. |
| 1.3.6.1.4.1.5504.4.3.2.1.1.10 | Columnv52IgRemoteProvVariant | read-only | current | LE side provisioning variant used to differentiate variations in configuration. This is read only can only be updated indirectly by setting v52IgProvVariantReq… |
| 1.3.6.1.4.1.5504.4.3.2.1.1.11 | Columnv52IgProvVariantRequest | read-create | current | User requests to carry out various actions about provisioning variant. Valid values for this variable can be: * noRequest - this is the default value. Setting … |
| 1.3.6.1.4.1.5504.4.3.2.1.1.12 | Columnv52IgProvVariantRequestStatus | read-only | current | Status result for v52IgProvVariantRequest. When v52IgProvVariantRequest has a value of noRequest, the value for this variable is invalid. Valid values for this… |
| 1.3.6.1.4.1.5504.4.3.2.1.1.13 | Columnv52IgAdminStatus | read-create | current | Interface Admin Status. Valid values are inService, outOfService, deferredOutOfService and restart. Default value is outOfService. * 'deferredOutofService' tak… |
| 1.3.6.1.4.1.5504.4.3.2.1.1.14 | Columnv52IgOperationalStatus | read-only | current | Interface operational status. Valid values are operable, inoperable, standby, and degradedService. Indicates whether it is fully inoperable and unable to provi… |
| 1.3.6.1.4.1.5504.4.3.2.1.1.15 | Columnv52IgOperStatusCause | read-only | current | Cause for Interface operational status. Valid values are other, localDisable, remoteOutOfService, and protocolFailure. |
| 1.3.6.1.4.1.5504.4.3.2.1.1.16 | Columnv52IgMaxConfiguredCalls | read-only | current | Maximum number of active calls. Maximum number of active calls is equal to the maximum number of links (up to 16) assigned to the IG times the maximum number o… |
| 1.3.6.1.4.1.5504.4.3.2.1.1.17 | Columnv52IgCurrActiveCalls | read-only | current | The number of calls currently active. Not supported. |
| 1.3.6.1.4.1.5504.4.3.2.1.1.18 | Columnv52IgPstnLayer3StartAddress | read-create | current | Starting PSTN layer 3 port address the analogue access is assigned to. Valid range in 0..32767. This variable can only be modified when v52IgAdminStatus is set… |
| 1.3.6.1.4.1.5504.4.3.2.1.1.19 | Columnv52IgIsdnEnvFuncStartAddress | read-create | current | The envelope function starting address the ISDN primary rate access is assigned to. Valid range is 0..8175. This variable can only be modified when v52IgAdminS… |
| 1.3.6.1.4.1.5504.4.3.2.1.1.20 | Columnv52IgStatsTimeElapsed | read-only | current | The number of seconds that have elapsed since the beginning of the current collection period. If, for some reason, such as an adjustment in the system's time-o… |
| 1.3.6.1.4.1.5504.4.3.2.1.1.21 | Columnv52IgStatsValidIntervals | read-only | current | The number of previous intervals for which data was collected. The value will typically be 96 unless the interface group was brought online within the last 24 … |
| 1.3.6.1.4.1.5504.4.3.2.1.1.22 | Columnv52IgStatsInvalidIntervals | read-only | current | The number of intervals in the range from 0 to igStatsValidIntervals for which no data is available. This object will typically be zero except in cases where t… |
| 1.3.6.1.4.1.5504.4.3.2.1.1.23 | Columnv52IgPortAlignmentRequest | read-create | current | Request to block or unblock all the user ports associated with the current IG by port type. This is needed to be compiliant with the V5.2 requirement for Accel… |
| 1.3.6.1.4.1.5504.4.3.2.1.1.24 | Columnv52IgPortAlignmentStatus | read-only | current | Indicate the status result for user port block/unblock request by port type. The values of this variable indicate both type of request and its success or fail … |
| 1.3.6.1.4.1.5504.4.3.2.1.1.25 | Columnv52IgNationalPstnRegion | read-create | current | V5.2's regional and country specific setting for the PSTN profile. This setting will dictate the regional signaling differences such as ring cadence. ETSI is t… |
| 1.3.6.1.4.1.5504.4.3.2.1.1.26 | Columnv52IgSwitchVendor | read-create | current | The switch vendor for the Interface Group. The following switch vendors are defined: unknown, lucent, nortel, alcatel, ericsson, nokia, siemens, samsung. Pleas… |
| 1.3.6.1.4.1.5504.4.3.2.1.1.27 | Columnv52IgProtocolSpecification | read-create | current | This variable specifies which variation of the v5.2 protocol is to be used by this interface group. Currently, there are two variations defined according to th… |
| 1.3.6.1.4.1.5504.4.3.2.1.1.28 | Columnv52IgRowStatus | read-create | current | Used to control row creation and deletion. A row in this table is created using a single SNMP SET request with varbinds for: a) v52IgRowStatus set to'CreateAnd… |
| 1.3.6.1.4.1.5504.4.3.2.2 | Tablev52InterfaceGroupLapvTable | not-accessible | current | V5.2 Interface Group LAPV table. This table contains the configurable LAPV parameters for the interface group. It augments the v52InterfaceGroupTable. When an … |
| 1.3.6.1.4.1.5504.4.3.2.2.1 | Rowv52InterfaceGroupLapvEntry | not-accessible | current | An augmented entry in the v52InterfaceGroupLapvTable. This table augments the v52InterfaceGroupTable. |
| 1.3.6.1.4.1.5504.4.3.2.2.1.1 | Columnv52IgLapvMaxOutstandingFrames | read-create | current | Maximum number of outstanding information frames at layer 2 Range of valid values is 1-7. Default value is 7. Currently, the value of this variable cannot be c… |
| 1.3.6.1.4.1.5504.4.3.2.2.1.2 | Columnv52IgLapvN200 | read-create | current | The maximum number of retransmissions for a frame allowed at layer 2, N200 shall be user selectable within the range of 1 to 10, inclusive, with a step size of… |
| 1.3.6.1.4.1.5504.4.3.2.2.1.3 | Columnv52IgLapvN201 | read-create | current | The maximum number of octets in the information field of an I frame, N201, shall be 260. (This SAP is used for operations messages.) Valid range is 0..260. Def… |
| 1.3.6.1.4.1.5504.4.3.2.2.1.4 | Columnv52IgLapvT200 | read-create | current | Maximum layer 2 wait time for an acknowledgment of a transmitted frame (T200) For all SAPs, the value of T200 shall be user selectable within the range of 100 … |
| 1.3.6.1.4.1.5504.4.3.2.2.1.5 | Columnv52IgLapvT203 | read-create | current | Maximum layer 2 idle time before connection verification is necessary (T203).For all SAPS, the value of T203 shall be user selectable within the range of 10 to… |
| 1.3.6.1.4.1.5504.4.3.2.3 | Tablev52LinkTable | not-accessible | current | Table of provisioned 2.048 Mbit/s E1 links, The term link is a logical concept used to describe a communication channel between two points. in V5 there are man… |
| 1.3.6.1.4.1.5504.4.3.2.3.1 | Rowv52LinkEntry | not-accessible | current | An entry in the v52LinkTable. |
| 1.3.6.1.4.1.5504.4.3.2.3.1.1 | Columnv52LinkDsnLgId | not-accessible | current | The v52LinkDsnLgId object identifies the line group entry ID for the E1 line group ID. The range for v52LinkDsnLgId is 1..2147483647. |
| 1.3.6.1.4.1.5504.4.3.2.3.1.2 | Columnv52LinkDs1ChannelNumber | not-accessible | current | Identifies the DS1 for the channelized DS3 or physical T1/E1. The v52LinkDs1ChannelNumber for a card with a physical T1 or E1 is 1, otherwise it refers to the … |
| 1.3.6.1.4.1.5504.4.3.2.3.1.3 | Columnv52LinkId | read-create | current | V5.2 Link identifier. Provisioned. Valid range is 0..255. |
| 1.3.6.1.4.1.5504.4.3.2.3.1.4 | Columnv52LinkCheckId | read-create | current | Valid values for this variable are activated and notActivated and the default is notActivated. Set this variable to 'activated' to request check v52LinkId with… |
| 1.3.6.1.4.1.5504.4.3.2.3.1.5 | Columnv52LinkCheckIdStatus | read-only | current | Status result for v52LinkCheckId. Valid values for this variable are succeeded, failed and rejected. It is the responsibility of the system management to take … |
| 1.3.6.1.4.1.5504.4.3.2.3.1.6 | Columnv52LinkAdminStatus | read-create | obsolete | Link Admin Status. Valid values are inService and outOfService. Default is outOfService. This variable is obsolete and will no longer be used. |
| 1.3.6.1.4.1.5504.4.3.2.3.1.7 | Columnv52LinkBlock | read-create | current | Link blocking procedure is asymmetrical. AN requests link block, LE decides, LE releases connection, LE re-establishes semi-perm and pre-connected connections.… |
| 1.3.6.1.4.1.5504.4.3.2.3.1.8 | Columnv52LinkBlockStatus | read-only | current | AdminLinkBlock operational status. Link blocking procedure is assymetrical. AN requests link block, LE decides, LE releases connection, LE re-establishes semi-… |
| 1.3.6.1.4.1.5504.4.3.2.3.1.9 | Columnv52LinkRowStatus | read-create | current | Used to control row creation and deletion. A row in this table is created using a single SNMP SET request with varbinds for: a) v52LinkRowStatus set to'CreateA… |
| 1.3.6.1.4.1.5504.4.3.2.4 | Tablev52CChannelTable | not-accessible | current | Communication Channel (C-channel). C-paths (see v52CPathTable) are carried over C-channels (communications channels). In V5, there are two types of C-channels,… |
| 1.3.6.1.4.1.5504.4.3.2.4.1 | Rowv52CChannelEntry | not-accessible | current | Communication Channel (C-Channel) Entry. Indexed by v52IgNameId, v52LinkIndex and v52CChannelTimeSlotIndex. Time slots are contained in the Link and in the eve… |
| 1.3.6.1.4.1.5504.4.3.2.4.1.1 | Columnv52CChannelTimeSlotIndex | not-accessible | current | Time Slot Index. A V5 interface contains 31 V5 time slots. Time slot 0 is not instantiated, as it is an intrinsic part of the 2048 kbit/s link used for framing… |
| 1.3.6.1.4.1.5504.4.3.2.4.1.2 | Columnv52CChannelLogicalChannelId | read-create | current | Logical C-Channels carry a group of one or more C-Paths, excluding the C-Paths used for Protection protocol. A V5.2 interface may contain up to 44 logical C-ch… |
| 1.3.6.1.4.1.5504.4.3.2.4.1.3 | Columnv52CChannelProtGp | read-create | current | C-Channel protection group. Valid values are none, group1, oneToOneGroup2, and mToNgroup2. Default value is none. oneToOneGroup2 option is currently not suppor… |
| 1.3.6.1.4.1.5504.4.3.2.4.1.4 | Columnv52CChannelRole | read-create | current | C-Channel role. Valid values are: * active - the C-Channel is currently active mode. * standby - the C-Channel is currently in standby mode. * switchToStandby … |
| 1.3.6.1.4.1.5504.4.3.2.4.1.5 | Columnv52CChannelStatus | read-only | current | C-Channel status. Valid values are active, standby, and failed. |
| 1.3.6.1.4.1.5504.4.3.2.4.1.6 | Columnv52CChannelCurrentLogicalChannelId | read-only | current | The value of this variable indicates the current logical C-Channel identifier of the physical C-Channel. This is useful when a physical C-Channel that was prov… |
| 1.3.6.1.4.1.5504.4.3.2.4.1.7 | Columnv52CChannelRowStatus | read-create | current | Used to control row creation and deletion. A row in this table is created using a single SNMP SET request with varbinds for: a) v52CChannelRowStatus set to'Cre… |
| 1.3.6.1.4.1.5504.4.3.2.4.1.8 | Columnv52CChannelStatusCause | read-only | current | Cause for CChannelStatus. Valid values are * other, * switchOverRejected * switchOverError * switchOverResetSequenceNumberError * switchOverAborted * switchOve… |
| 1.3.6.1.4.1.5504.4.3.2.5 | Tablev52CPathTable | not-accessible | current | C-paths consist of a layer 2 data link carrying an associated layer 3 signaling protocol. Layer 3 signaling is defined by the Control, Link Control, PSTN, BCC,… |
| 1.3.6.1.4.1.5504.4.3.2.5.1 | Rowv52CPathEntry | not-accessible | current | Entry in the v52CPathTable. |
| 1.3.6.1.4.1.5504.4.3.2.5.1.1 | Columnv52CPathId | not-accessible | current | 8-bit C-Path identifier. Provisioned. Valid range is 1..48. |
| 1.3.6.1.4.1.5504.4.3.2.5.1.2 | Columnv52CPathType | read-create | current | C-path type can be unknown, pstn (PSTN), ctrl (Control protocol), bcc (Bearer Channel Connection protocol), lctl (Link Control protocol), and the following ISD… |
| 1.3.6.1.4.1.5504.4.3.2.5.1.3 | Columnv52CPathLogicalChannelId | read-create | current | C-Channel logical Channel ID assigned to this C-Path. Provisioned. Valid range is 0..65535. |
| 1.3.6.1.4.1.5504.4.3.2.5.1.4 | Columnv52CPathRowStatus | read-create | current | Used to control row creation and deletion. A row in this table is created using a single SNMP SET request with varbinds for: a) v52CPathRowStatus set to'Create… |
| 1.3.6.1.4.1.5504.4.3.2.5.1.5 | Columnv52CPathOperStatus | read-only | current | The operational status of this CPath. Valid values are 'up' and 'down'. |
| 1.3.6.1.4.1.5504.4.3.2.5.1.6 | Columnv52CPathOperStatusCause | read-only | current | Cause for CPathOperStatus. Valid values are: * establishConfirmationReceived - the data link has been successfully established upon a local request. * establis… |
| 1.3.6.1.4.1.5504.4.3.2.6 | Tablev52UserPortTable | not-accessible | current | The User Port Table holds information regarding the PSTN and ISDN user ports. Information regarding the provisioning and availability status of the port is mai… |
| 1.3.6.1.4.1.5504.4.3.2.6.1 | Rowv52UserPortEntry | not-accessible | current | User Port Entry. |
| 1.3.6.1.4.1.5504.4.3.2.6.1.1 | Columnv52UserPortAddress | not-accessible | current | User Port Address. If UserPortType is PSTN, valid range is 0..32767. If UserPortType is ISDN, valid range is 0..8175. Maximum value is 32767. The actual addres… |
| 1.3.6.1.4.1.5504.4.3.2.6.1.2 | Columnv52UserPortType | not-accessible | current | User Port type. Valid values are unknown, pstn, isdnBa, isdnPra. |
| 1.3.6.1.4.1.5504.4.3.2.6.1.3 | Columnv52UserPortAdminStatus | read-create | current | UserPort Admin Status. Valid values are inService and outOfService. Default is outOfService. |
| 1.3.6.1.4.1.5504.4.3.2.6.1.4 | Columnv52UserPortBlock | read-create | current | The Q3 interface of the access network can request that a port be blocked for non-urgent configuration or reconfiguration. If the port is routed through a V5 i… |
| 1.3.6.1.4.1.5504.4.3.2.6.1.5 | Columnv52UserPortBlockStatus | read-only | current | UserPortBlock operational status. Valid values are: * localBlocked - local is blocked * remoteBlocked - remote is blocked * bothBlocked - both local and remote… |
| 1.3.6.1.4.1.5504.4.3.2.6.1.6 | Columnv52UserPortRegOrLeaseUser | read-create | current | User is a regular, permanent lease, or semi-permanent leaseuser. Valid values are regular, permanentLease, semiPermanentLease. Default is regular. |
| 1.3.6.1.4.1.5504.4.3.2.6.1.7 | Columnv52UserPortIsdnDsCPathId | read-create | current | An ISDN user port can carry more than one type of the Ds-type, p-type and f-type data. When this user port is configured to carry Ds-type data, the value of th… |
| 1.3.6.1.4.1.5504.4.3.2.6.1.8 | Columnv52UserPortIsdnPCPathId | read-create | current | An ISDN user port can carry more than one type of the Ds-type, p-type and f-type data. When this user port is configured to carry p-type data, the value of thi… |
| 1.3.6.1.4.1.5504.4.3.2.6.1.9 | Columnv52UserPortIsdnFCPathId | read-create | current | An ISDN user port can carry more than one type of the Ds-type, p-type and f-type data. When this user port is configured to carry f-type data, the value of thi… |
| 1.3.6.1.4.1.5504.4.3.2.6.1.10 | Columnv52UserPortRowStatus | read-create | current | Used to control row creation and deletion. A row in this table is created using a single SNMP SET request with varbinds for: a) v52UserPortRowStatus set to'Cre… |
| 1.3.6.1.4.1.5504.4.3.2.6.1.11 | Columnv52UserPortOperStatus | read-only | current | User port operational status. Valid values are inService, manualOos and Oos. * 'inService' - the user port is ready to carry calls. * 'manualOos' - the user po… |
| 1.3.6.1.4.1.5504.4.3.2.7 | Tablev52StatsCurrentTable | not-accessible | current | The V5.2 Interface Group Statistics Current Table. The V5.2 Interface Group Statistics current table contains various statistics being collected for the curren… |
| 1.3.6.1.4.1.5504.4.3.2.7.1 | Rowv52StatsCurrentEntry | not-accessible | current | An entry in the v52StatsCurrentTable which AUGMENTS the base table v52InterfaceGroupTable. There is a 1-to-1 correspondence between rows in interfaceGroupTable… |
| 1.3.6.1.4.1.5504.4.3.2.7.1.1 | Columnv52IfCurrentPstnOutboundCalls | read-only | current | The number of PSTN outbound calls completed. |
| 1.3.6.1.4.1.5504.4.3.2.7.1.2 | Columnv52IfCurrentPstnInboundCalls | read-only | current | The number of PSTN inbound calls completed. |
| 1.3.6.1.4.1.5504.4.3.2.7.1.3 | Columnv52IfCurrentCallsBlocked | read-only | current | The number of calls that were blocked due to no available time-slot. |
| 1.3.6.1.4.1.5504.4.3.2.7.1.4 | Columnv52IfCurrentV52ProtocolErrors | read-only | current | The number of V5.2 Protocol errors. |
| 1.3.6.1.4.1.5504.4.3.2.7.1.5 | Columnv52IfCurrentLapdSent | read-only | current | The number of LAPD frames sent on all C-Paths for this interface group. |
| 1.3.6.1.4.1.5504.4.3.2.7.1.6 | Columnv52IfCurrentLapdRcvd | read-only | current | The number LAPD frames received on all C-Paths for this interface group. |
| 1.3.6.1.4.1.5504.4.3.2.7.1.7 | Columnv52IfCurrentLapdRcvdErrs | read-only | current | The number LAPD frames received in error on all C-Paths for this interface group. |
| 1.3.6.1.4.1.5504.4.3.2.7.1.8 | Columnv52IfCurrentIsdnCalls | read-only | current | The number of ISDN calls completed. |
| 1.3.6.1.4.1.5504.4.3.2.8 | Tablev52StatsIntervalTable | not-accessible | current | V5.2 Interface Group Statistics Interval Table. The V5.2 Interface Group Statistics Interval Table contains various statistics collected by each Interface Grou… |
| 1.3.6.1.4.1.5504.4.3.2.8.1 | Rowv52StatsIntervalEntry | not-accessible | current | An entry in the igStatsIntervalTable. Indexed by (igNameId, igIntervalNumber). |
| 1.3.6.1.4.1.5504.4.3.2.8.1.1 | Columnv52IfIntervalNumber | not-accessible | current | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior … |
| 1.3.6.1.4.1.5504.4.3.2.8.1.2 | Columnv52IfIntervalPstnOutboundCalls | read-only | current | The number of PSTN outbound calls completed. |
| 1.3.6.1.4.1.5504.4.3.2.8.1.3 | Columnv52IfIntervalPstnInboundCalls | read-only | current | The number of PSTN inbound calls completed. |
| 1.3.6.1.4.1.5504.4.3.2.8.1.4 | Columnv52IfIntervalCallsBlocked | read-only | current | The number of calls that were blocked due to no available time-slot. |
| 1.3.6.1.4.1.5504.4.3.2.8.1.5 | Columnv52IfIntervalV52ProtocolErrors | read-only | current | The number of V5.2 Protocol errors. |
| 1.3.6.1.4.1.5504.4.3.2.8.1.6 | Columnv52IfIntervalLapdSent | read-only | current | The number of LAPD frames sent on all C-Paths for this interface group. |
| 1.3.6.1.4.1.5504.4.3.2.8.1.7 | Columnv52IfIntervalLapdRcvd | read-only | current | The number LAPD frames received on all C-Paths for this interface group. |
| 1.3.6.1.4.1.5504.4.3.2.8.1.8 | Columnv52IfIntervalLapdRcvdErrs | read-only | current | The number LAPD frames received in error on all C-Paths for this interface group. |
| 1.3.6.1.4.1.5504.4.3.2.8.1.9 | Columnv52IfIntervalIsdnCalls | read-only | current | The number of ISDN calls completed. |
| 1.3.6.1.4.1.5504.4.3.2.9 | Tablev52StatsTotalTable | not-accessible | current | V5.2 Interface Group Statistics Total Table. The V5.2 Interface Group Statistics Total Table contains the cumulative sum of the various statistics for the 24 h… |
| 1.3.6.1.4.1.5504.4.3.2.9.1 | Rowv52StatsTotalEntry | not-accessible | current | An entry in the v52StatsTotalTable which AUGMENTS the base table interfaceGroupTable. There is a 1-to-1 correspondence between rows in v52InterfaceGroupTable a… |
| 1.3.6.1.4.1.5504.4.3.2.9.1.1 | Columnv52IfTotalPstnOutboundCalls | read-only | current | The number of PSTN outbound calls completed. |
| 1.3.6.1.4.1.5504.4.3.2.9.1.2 | Columnv52IfTotalPstnInboundCalls | read-only | current | The number of PSTN inbound calls completed. |
| 1.3.6.1.4.1.5504.4.3.2.9.1.3 | Columnv52IfTotalCallsBlocked | read-only | current | The number of calls that were blocked due to no available time-slot. |
| 1.3.6.1.4.1.5504.4.3.2.9.1.4 | Columnv52IfTotalV52ProtocolErrors | read-only | current | The number of V5.2 Protocol errors. |
| 1.3.6.1.4.1.5504.4.3.2.9.1.5 | Columnv52ifTotalLapdSent | read-only | current | The number of LAPD frames sent on all C-Paths for this interface group. |
| 1.3.6.1.4.1.5504.4.3.2.9.1.6 | Columnv52IfTotalLapdRcvd | read-only | current | The number LAPD frames received on all C-Paths for this interface group. |
| 1.3.6.1.4.1.5504.4.3.2.9.1.7 | Columnv52IfTotalLapdRcvdErrs | read-only | current | The number LAPD frames received in error on all C-Paths for this interface group. |
| 1.3.6.1.4.1.5504.4.3.2.9.1.8 | Columnv52IfTotalIsdnCalls | read-only | current | The number of ISDN calls completed. |
| 1.3.6.1.4.1.5504.4.3.2.10 | Identityv52Traps | current | All the Zhone trap notifications for V5.2 managed objectes will be defined under v52Traps. | |
| 1.3.6.1.4.1.5504.4.3.2.10.0 | Identityv52TrapsPrefix | current | This is the 0 prefix which is required for all v52 traps defined in SNMPv2. | |
| 1.3.6.1.4.1.5504.4.3.2.10.0.1 | Notificationv52IgProvVariantRequestNotification | current | This is the notification response for a SNMP set on v52IgProvVariantRequest. This notification is generated only when request is initiatated from the AN side. … | |
| 1.3.6.1.4.1.5504.4.3.2.10.0.2 | Notificationv52IgPortAlignmentNotification | current | This is the notification response for a SNMP set on v52IgPortAlignmentRequest. The v52IgPortAlignmentRequest object indicates the type of request initiated by … | |
| 1.3.6.1.4.1.5504.4.3.2.10.0.3 | Notificationv52LinkCheckIdNotification | current | This is the notification response for a SNMP set on v52LinkCheckId. When Check Link ID is initiated by AN, v52LinkCheckId has a value of 'activated'. When Chec… | |
| 1.3.6.1.4.1.5504.4.3.2.10.0.4 | Notificationv52LinkBlockNotification | current | This is the notification response for a SNMP set on v52LinkBlock. | |
| 1.3.6.1.4.1.5504.4.3.2.10.0.5 | Notificationv52IgOperStatusChange | current | A v52IgOperStatusChange notification is sent out whenever the value of v52IgOperationalStatus changes. | |
| 1.3.6.1.4.1.5504.4.3.2.10.0.6 | Notificationv52CChannelStatusChange | current | A v52CChannelStatusChange notification is sent out whenever the value of v52ChannelStatus changes. | |
| 1.3.6.1.4.1.5504.4.3.2.10.0.7 | Notificationv52CPathOperStatusChange | current | A v52CPathOperStatusChange notification is sent out whenever the value of v52CPathOperStatus changes. This notificatoin will only be generated for pstn, ctrl, … | |
| 1.3.6.1.4.1.5504.4.3.2.10.0.8 | Notificationv52ProtectionCPathOperStatusChange | current | A v52ProtectionCPathOperStatusChange notification is sent out whenever the value of v52ProtectionCPathOperStatus changes. The protection C-Path is identified b… | |
| 1.3.6.1.4.1.5504.4.3.2.11 | Tablev52IgExtensionTable | not-accessible | current | This is the extension of the v52InterfaceGroupTable for extra configuration and monitoring variables for the V5.2 interface group. |
| 1.3.6.1.4.1.5504.4.3.2.11.1 | Rowv52IgExtensionEntry | not-accessible | current | An entry in the v52IgExtensionTable. v52IgExtensionEntry is augmented to v52InterfaceGroupEntry. Whenever a row is created or destroyed for the v52InterfaceGro… |
| 1.3.6.1.4.1.5504.4.3.2.11.1.1 | Columnv52IgStartupCheckLinkId | read-create | current | This variable indicates whether or not Link ID check will be performed when a V5.2 interface is starting up. The default value is 'false'. |
| 1.3.6.1.4.1.5504.4.3.2.11.1.2 | Columnv52IgStartupUnblockUserPorts | read-create | current | This variable indicates whether or not user ports will be unblocked when a V5.2 interface is starting up. The default value is 'false'. |
| 1.3.6.1.4.1.5504.4.3.2.11.1.3 | Columnv52IgLinkOutOfServiceTimer | read-create | current | This timer specifies the length of time a Link must be in a failed state before the interface declares the link failed. This timer value should always exceed t… |
| 1.3.6.1.4.1.5504.4.3.2.11.1.4 | Columnv52IgLinkInServiceTimer | read-create | current | This timer specifies the length of time a Link must be in a framed state before the interface declares the link in service. This timer value should always be l… |
| 1.3.6.1.4.1.5504.4.3.2.12 | Tablev52ProtectionCPathTable | not-accessible | current | This table is read-only and is derived from the protection group provisioning information from the v52CChannelTable. Unlike the C-Paths defined in v52CPathTabl… |
| 1.3.6.1.4.1.5504.4.3.2.12.1 | Rowv52ProtectionCPathEntry | not-accessible | current | An entry in the v52ProtectionCPathTable. The maximum number of entryies for this table is two. |
| 1.3.6.1.4.1.5504.4.3.2.12.1.1 | Columnv52ProtectionCPathId | not-accessible | current | The valid value range is 1..2. v52ProtectionCPathId 1 refers to the C-Path for protection running on the provisioned active C-Channel in protection group 1. v5… |
| 1.3.6.1.4.1.5504.4.3.2.12.1.2 | Columnv52ProtectionCPathOperStatus | read-only | current | This variable indicates the operational status of the protection CPath. The valid values are up(1) or down(2). |
| 1.3.6.1.4.1.5504.4.3.2.12.1.3 | Columnv52ProtectionCPathOperStatusCause | read-only | current | Cause for v52ProtectionCPathOperStatus. Valid values are: * establishConfirmationReceived - the data link has been successfully established upon a local reques… |