ZhoneVdsl-MIB
350 objects
The MIB module defining objects for the management of a pair of VDSL transceivers at each end of the VDSL line. Each such line has an entry in an ifTable which may include multiple transceiver lines. An agent may reside at either end of the VDSL line. However, the MIB is designed to require no management communication between them beyond that inherent in the low-level VDSL line protocol. The agent may monitor and control this protocol for its needs. VDSL lines may support optional Fast or Interleaved channels. If these are supported, additional entries corresponding to the supported channels must be created in the ifTable. Thus a VDSL line that supports both channels will have three entries in the ifTable, one for each physical, fast, and interleaved, whose ifType values are equal to vdsl(97), fast(125), and interleaved(124), respectively. The ifStackTable is used to represent the relationship between the entries. Naming Conventions: Vtuc Vtur Vtu Curr Prev Atn ES SES UAS LCS Lof Lol Los Lpr xxxs (e.g., xxx = Lof, Los, Lpr, Lol) Max Mgn Min Psd Snr Tx Blks Copyright (C) The Internet Society (2004). This version of this MIB module is part of RFC 3728: see the RFC itself for full legal notices.
Imported Objects
| HC-PerfHist-TC-MIB | HCPerfCurrentCount HCPerfIntervalCount HCPerfTimeElapsed |
| IF-MIB | ifIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE transmission Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| Zhone | zhoneModules zhoneVdsl |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5504.5.13.1 | NodezhoneVdslLineMib | |||
| 1.3.6.1.4.1.5504.5.13.1.0 | NodezhoneVdslNotifications | |||
| 1.3.6.1.4.1.5504.5.13.1.0.1 | NotificationvdslXtucPerf15MinLofsThreshTrap | current | Loss of Framing 15-minute interval threshold (vdslLineAlarmConfThresh15MinLofs) reached. | |
| 1.3.6.1.4.1.5504.5.13.1.0.2 | NotificationvdslXtucPerf15MinLossThreshTrap | current | Loss of Signal 15-minute interval threshold (vdslLineAlarmConfThresh15MinLoss) reached. | |
| 1.3.6.1.4.1.5504.5.13.1.0.3 | NotificationvdslXtucPerf15MinLprsThreshTrap | current | Loss of Power 15-minute interval threshold (vdslLineAlarmConfThresh15MinLprs) reached. | |
| 1.3.6.1.4.1.5504.5.13.1.0.4 | NotificationvdslXtucPerf15MinLolsThreshTrap | current | Loss of Link 15-minute interval threshold (vdslLineAlarmConfThresh15MinLols) reached. | |
| 1.3.6.1.4.1.5504.5.13.1.0.5 | NotificationvdslXtucPerf15MinESsThreshTrap | current | Errored Seconds 15-minute interval threshold (vdslLineAlarmConfThresh15MinESs) reached. | |
| 1.3.6.1.4.1.5504.5.13.1.0.6 | NotificationvdslXtucPerf15MinSESsThreshTrap | current | Severely Errored Seconds 15-minute interval threshold (vdslLineAlarmConfThresh15MinSESs) reached. | |
| 1.3.6.1.4.1.5504.5.13.1.0.7 | NotificationvdslXtucPerf15MinUASsThreshTrap | current | Unavailable Seconds 15-minute interval threshold (vdslLineAlarmConfThresh15MinUASs) reached. | |
| 1.3.6.1.4.1.5504.5.13.1.0.8 | NotificationvdslXtucPerf1DayLofsThreshTrap | current | Loss of Framing 1-day interval threshold (vdslLineAlarmConfThresh1DayLofs) reached. | |
| 1.3.6.1.4.1.5504.5.13.1.0.9 | NotificationvdslXtucPerf1DayLossThreshTrap | current | Loss of Signal 1-day interval threshold (vdslLineAlarmConfThresh1DayLoss) reached. | |
| 1.3.6.1.4.1.5504.5.13.1.0.10 | NotificationvdslXtucPerf1DayLprsThreshTrap | current | Loss of Power 1-day interval threshold (vdslLineAlarmConfThresh1DayLprs) reached. | |
| 1.3.6.1.4.1.5504.5.13.1.0.11 | NotificationvdslXtucPerf1DayLolsThreshTrap | current | Loss of Link 1-day interval threshold (vdslLineAlarmConfThresh1DayLols) reached. | |
| 1.3.6.1.4.1.5504.5.13.1.0.12 | NotificationvdslXtucPerf1DayESsThreshTrap | current | Errored Seconds 1-day interval threshold (vdslLineAlarmConfThresh1DayESs) reached. | |
| 1.3.6.1.4.1.5504.5.13.1.0.13 | NotificationvdslXtucPerf1DaySESsThreshTrap | current | Severely Errored Seconds 1-day interval threshold (vdslLineAlarmConfThresh1DaySESs) reached. | |
| 1.3.6.1.4.1.5504.5.13.1.0.14 | NotificationvdslXtucPerf1DayUASsThreshTrap | current | Unavailable Seconds 1-day interval threshold (vdslLineAlarmConfThresh1DayUASs) reached. | |
| 1.3.6.1.4.1.5504.5.13.1.0.15 | NotificationzhoneVdslInitFailureTrap | current | Vtu initialization failed. | |
| 1.3.6.1.4.1.5504.5.13.1.0.16 | NotificationvdslXtucMinTxThresholdAlarmFailureTrap | current | This trap is thrown when the XTUC line rate syncs below the threshold rate as defined by zhoneVdslLineConfDownMinTxThresholdAlarm. | |
| 1.3.6.1.4.1.5504.5.13.1.0.17 | NotificationvdslXturMinTxThresholdAlarmFailureTrap | current | This trap is thrown when the XTUR line rate syncs below the threshold rate as defined by zhoneVdslLineConfUpMinTxThresholdAlarm. | |
| 1.3.6.1.4.1.5504.5.13.1.1 | NodezhoneVdslMibObjects | |||
| 1.3.6.1.4.1.5504.5.13.1.1.1 | TablezhoneVdslLineTable | not-accessible | current | This table includes common attributes describing both ends of the line. It is required for all VDSL physical interfaces. VDSL physical interfaces are those ifE… |
| 1.3.6.1.4.1.5504.5.13.1.1.1.1 | RowzhoneVdslLineEntry | not-accessible | current | An entry in the vdslLineTable. |
| 1.3.6.1.4.1.5504.5.13.1.1.1.1.1 | ColumnzhoneVdslLineCoding | read-only | current | Specifies the VDSL coding type used on this line. |
| 1.3.6.1.4.1.5504.5.13.1.1.1.1.2 | ColumnzhoneVdslLineType | read-only | current | Defines the type of VDSL physical line entity that exists, by defining whether and how the line is channelized. If the line is channelized, the value will be o… |
| 1.3.6.1.4.1.5504.5.13.1.1.1.1.3 | ColumnzhoneVdslLineConfProfile | read-write | current | The value of this object identifies the row in the VDSL Line Configuration Profile Table, zhoneVdslLineConfProfileTable, which applies for this VDSL line, and … |
| 1.3.6.1.4.1.5504.5.13.1.1.1.1.4 | ColumnzhoneVdslLineAlarmConfProfile | read-write | current | The value of this object identifies the row in the VDSL Line Alarm Configuration Profile Table, zhoneVdslLineAlarmConfProfileTable, which applies to this VDSL … |
| 1.3.6.1.4.1.5504.5.13.1.1.2 | TablezhoneVdslPhysTable | not-accessible | current | This table provides one row for each Vtu. Each row contains the Physical Layer Parameters table for that Vtu. VDSL physical interfaces are those ifEntries wher… |
| 1.3.6.1.4.1.5504.5.13.1.1.2.1 | RowzhoneVdslPhysEntry | not-accessible | current | An entry in the vdslPhysTable. |
| 1.3.6.1.4.1.5504.5.13.1.1.2.1.1 | ColumnzhoneVdslPhysSide | not-accessible | current | Identifies whether the transceiver is the Vtuc or Vtur. |
| 1.3.6.1.4.1.5504.5.13.1.1.2.1.2 | ColumnzhoneVdslPhysInvSerialNumber | read-only | current | The vendor specific string that identifies the vendor equipment. |
| 1.3.6.1.4.1.5504.5.13.1.1.2.1.3 | ColumnzhoneVdslPhysInvVendorID | read-only | current | The vendor ID code is a copy of the binary vendor identification field expressed as readable characters in hexadecimal notation. |
| 1.3.6.1.4.1.5504.5.13.1.1.2.1.4 | ColumnzhoneVdslPhysInvVersionNumber | read-only | current | The vendor specific version number sent by this Vtu as part of the initialization messages. It is a copy of the binary version number field expressed as readab… |
| 1.3.6.1.4.1.5504.5.13.1.1.2.1.5 | ColumnzhoneVdslPhysCurrSnrMgn | read-only | current | Noise Margin as seen by this Vtu with respect to its received signal in 0.10dB. The effective range is -31.75 to +31.75 dB. |
| 1.3.6.1.4.1.5504.5.13.1.1.2.1.6 | ColumnzhoneVdslPhysCurrAtn | read-only | current | Measured difference in the total power transmitted by the peer Vtu and the total power received by this Vtu. The effective range is 0 to +63.75 dB. |
| 1.3.6.1.4.1.5504.5.13.1.1.2.1.7 | ColumnzhoneVdslPhysCurrStatus | read-only | current | Indicates current state of the Vtu line. This is a bit-map of possible conditions. The various bit positions are: 0 noDefect There are no defects on the line. … |
| 1.3.6.1.4.1.5504.5.13.1.1.2.1.8 | ColumnzhoneVdslPhysCurrOutputPwr | read-only | current | Measured total output power transmitted by this VTU. This is the measurement that was reported during the last activation sequence. |
| 1.3.6.1.4.1.5504.5.13.1.1.2.1.9 | ColumnzhoneVdslPhysCurrAttainableRate | read-only | current | Indicates the maximum currently attainable data rate in steps of 1000 bits/second by the Vtu. This value will be equal to or greater than vdslPhysCurrLineRate.… |
| 1.3.6.1.4.1.5504.5.13.1.1.2.1.10 | ColumnzhoneVdslPhysCurrLineRate | read-only | current | Indicates the current data rate in steps of 1000 bits/second by the Vtu. This value will be less than or equal to vdslPhysCurrAttainableRate. Note: 1 kbps = 10… |
| 1.3.6.1.4.1.5504.5.13.1.1.2.1.12 | ColumnzhoneVdslPhysCurrConnType | read-only | current | Indicates current connection type. unknown(1) - could not determine connection type not-connected(2) - connection has not been established invalid(3) - unknown… |
| 1.3.6.1.4.1.5504.5.13.1.1.2.1.13 | ColumnzhoneVdslPhysCurrProfile | read-only | current | Indicates current VDSL profile being used in the connection. This object is only valid for VDSL connections. |
| 1.3.6.1.4.1.5504.5.13.1.1.2.1.14 | ColumnzhoneVdslPhysPhyRActive | read-only | current | Phy Retransmit Rx Queue Active. |
| 1.3.6.1.4.1.5504.5.13.1.1.2.1.15 | ColumnzhoneVdslPhysGinpActive | read-only | current | G.INP/ITU-G.998.4 feature active |
| 1.3.6.1.4.1.5504.5.13.1.1.2.1.16 | ColumnzhoneVdslPhysTransportMode | read-only | current | Transport mode, either ATM or PTM |
| 1.3.6.1.4.1.5504.5.13.1.1.3 | TablezhoneVdslChanTable | not-accessible | current | This table provides one row for each Vtu channel. VDSL channel interfaces are those ifEntries where ifType is equal to interleave(124) or fast(125). |
| 1.3.6.1.4.1.5504.5.13.1.1.3.1 | RowzhoneVdslChanEntry | not-accessible | current | An entry in the vdslChanTable. |
| 1.3.6.1.4.1.5504.5.13.1.1.3.1.1 | ColumnzhoneVdslChanInterleaveDelay | read-only | current | Interleave Delay for this channel. Interleave delay applies only to the interleave (slow) channel and defines the mapping (relative spacing) between subsequent… |
| 1.3.6.1.4.1.5504.5.13.1.1.3.1.2 | ColumnzhoneVdslChanCrcBlockLength | read-only | current | Indicates the length of the channel data-block on which the CRC operates. |
| 1.3.6.1.4.1.5504.5.13.1.1.3.1.3 | ColumnzhoneVdslChanCurrTxRate | read-only | current | Actual transmit data rate on this channel. Note: 1 kbps = 1000 bps. |
| 1.3.6.1.4.1.5504.5.13.1.1.3.1.4 | ColumnzhoneVdslChanCurrTxSlowBurstProtect | read-only | current | Actual level of impulse noise (burst) protection for an interleaved (slow) channel. This parameter is not applicable to fast channels. For fast channels, a val… |
| 1.3.6.1.4.1.5504.5.13.1.1.3.1.5 | ColumnzhoneVdslChanCurrTxFastFec | read-only | current | Actual Forward Error Correction (FEC) redundancy related overhead for a fast channel. This parameter is not applicable to an interleaved (slow) channel. For in… |
| 1.3.6.1.4.1.5504.5.13.1.1.4 | TablezhoneVdslPerfDataTable | not-accessible | current | This table provides one row for each VDSL physical interface. VDSL physical interfaces are those ifEntries where ifType is equal to vdsl(97). |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1 | RowzhoneVdslPerfDataEntry | not-accessible | current | An entry in the vdslPerfDataTable. |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.1 | ColumnzhoneVdslPerfDataValidIntervals | read-only | current | Valid Intervals per definition found in HC-PerfHist-TC-MIB. |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.2 | ColumnzhoneVdslPerfDataInvalidIntervals | read-only | current | Invalid Intervals per definition found in HC-PerfHist-TC-MIB. |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.3 | ColumnzhoneVdslPerfDataLofs | read-only | current | Count of seconds since the unit was last reset that there was Loss of Framing. |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.4 | ColumnzhoneVdslPerfDataLoss | read-only | current | Count of seconds since the unit was last reset that there was Loss of Signal. |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.5 | ColumnzhoneVdslPerfDataLprs | read-only | current | Count of seconds since the unit was last reset that there was Loss of Power. |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.6 | ColumnzhoneVdslPerfDataLols | read-only | current | Count of seconds since the unit was last reset that there was Loss of Link. |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.7 | ColumnzhoneVdslPerfDataESs | read-only | current | Count of Errored Seconds since the unit was last reset. An Errored Second is a one-second interval containing one or more CRC anomalies, or one or more LOS or … |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.8 | ColumnzhoneVdslPerfDataSESs | read-only | current | Count of Severely Errored Seconds since the unit was last reset. |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.9 | ColumnzhoneVdslPerfDataUASs | read-only | current | Count of Unavailable Seconds since the unit was last reset. |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.10 | ColumnzhoneVdslPerfDataInits | read-only | current | Count of the line initialization attempts since the unit was last reset. This count includes both successful and failed attempts. |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.11 | ColumnzhoneVdslPerfDataCurr15MinTimeElapsed | read-only | current | Total elapsed seconds in this interval. |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.12 | ColumnzhoneVdslPerfDataCurr15MinLofs | read-only | current | Count of seconds during this interval that there was Loss of Framing. |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.13 | ColumnzhoneVdslPerfDataCurr15MinLoss | read-only | current | Count of seconds during this interval that there was Loss of Signal. |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.14 | ColumnzhoneVdslPerfDataCurr15MinLprs | read-only | current | Count of seconds during this interval that there was Loss of Power. |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.15 | ColumnzhoneVdslPerfDataCurr15MinLols | read-only | current | Count of seconds during this interval that there was Loss of Link. |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.16 | ColumnzhoneVdslPerfDataCurr15MinESs | read-only | current | Count of Errored Seconds during this interval. An Errored Second is a one-second interval containing one or more CRC anomalies, or one or more LOS or LOF defec… |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.17 | ColumnzhoneVdslPerfDataCurr15MinSESs | read-only | current | Count of Severely Errored Seconds during this interval. |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.18 | ColumnzhoneVdslPerfDataCurr15MinUASs | read-only | current | Count of Unavailable Seconds during this interval. |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.19 | ColumnzhoneVdslPerfDataCurr15MinInits | read-only | current | Count of the line initialization attempts during this interval. This count includes both successful and failed attempts. |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.20 | ColumnzhoneVdslPerfData1DayValidIntervals | read-only | current | Valid Intervals per definition found in HC-PerfHist-TC-MIB. |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.21 | ColumnzhoneVdslPerfData1DayInvalidIntervals | read-only | current | Invalid Intervals per definition found in HC-PerfHist-TC-MIB. |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.22 | ColumnzhoneVdslPerfDataCurr1DayTimeElapsed | read-only | current | Number of seconds that have elapsed since the beginning of the current 1-day interval. |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.23 | ColumnzhoneVdslPerfDataCurr1DayLofs | read-only | current | Count of Loss of Framing (LOF) Seconds since the beginning of the current 1-day interval. |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.24 | ColumnzhoneVdslPerfDataCurr1DayLoss | read-only | current | Count of Loss of Signal (LOS) Seconds since the beginning of the current 1-day interval. |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.25 | ColumnzhoneVdslPerfDataCurr1DayLprs | read-only | current | Count of Loss of Power (LPR) Seconds since the beginning of the current 1-day interval. |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.26 | ColumnzhoneVdslPerfDataCurr1DayLols | read-only | current | Count of Loss of Link (LOL) Seconds since the beginning of the current 1-day interval. |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.27 | ColumnzhoneVdslPerfDataCurr1DayESs | read-only | current | Count of Errored Seconds (ES) since the beginning of the current 1-day interval. |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.28 | ColumnzhoneVdslPerfDataCurr1DaySESs | read-only | current | Count of Severely Errored Seconds (SES) since the beginning of the current 1-day interval. |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.29 | ColumnzhoneVdslPerfDataCurr1DayUASs | read-only | current | Count of Unavailable Seconds (UAS) since the beginning of the current 1-day interval. |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.30 | ColumnzhoneVdslPerfDataCurr1DayInits | read-only | current | Count of the line initialization attempts since the beginning of the current 1-day interval. This count includes both successful and failed attempts. |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.31 | ColumnzhoneVdslPhyrRetransmittedCodewords | read-only | current | Retransmitted Codewords |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.32 | ColumnzhoneVdslPhyrCorrectedRetransmittedCodewords | read-only | current | Retransmitted corrected Codewords |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.33 | ColumnzhoneVdslPhyrUncorrectableRetransmittedCodewords | read-only | current | Retransmitted uncorrectable Codewords |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.34 | ColumnzhoneVdslPhyrCurr15MinRetransmittedCodewords | read-only | current | Current 15 minutes Retransmitted Codewords |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.35 | ColumnzhoneVdslPhyrCurr15MinCorrectedRetransmittedCodewords | read-only | current | Current 15 minutes Retransmitted Corrected Codewords |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.36 | ColumnzhoneVdslPhyrCurr15MinUncorrectableRetransmittedCodewords | read-only | current | Current 15 minutes Retransmitted Uncorrectable Codewords |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.37 | ColumnzhoneVdslPhyrCurr1DayRetransmittedCodewords | read-only | current | Current Day Retransmitted Codewords |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.38 | ColumnzhoneVdslPhyrCurr1DayCorrectedRetransmittedCodewords | read-only | current | Current Day Retransmitted Corrected Codewords |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.39 | ColumnzhoneVdslPhyrCurr1DayUncorrectableRetransmittedCodewords | read-only | current | Current Day Retransmitted Uncorrectable Codewords |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.40 | ColumnzhoneVdslPhyrPrev1DayRetransmittedCodewords | read-only | current | Previous Day Retransmitted Codewords |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.41 | ColumnzhoneVdslPhyrPrev1DayCorrectedRetransmittedCodewords | read-only | current | Previous Day Retransmitted Corrected Codewords |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.42 | ColumnzhoneVdslPhyrPrev1DayUncorrectableRetransmittedCodewords | read-only | current | Previous Day Retransmitted Uncorrectable Codewords |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.43 | ColumnzhoneVdslGinpLeftrSecs | read-only | current | LEFTRS - This counter counts the number of seconds that experienced a Low Error Free Throughput Rate (LEFTR), i,e., seconds during which the Error Free Through… |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.44 | ColumnzhoneVdslGinpErrorFreeBits | read-only | current | errorFreeBits - This counter counts the number of bits that crossed the alpha1/beta1 interface (bits available to carry user payload). |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.45 | ColumnzhoneVdslGinpMinEftr | read-only | current | minEFTR - This performance monitoring parameter records the lowest value of Error Free Throughput during the current interval. |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.46 | ColumnzhoneVdslGinpCurr15MinLeftrSecs | read-only | current | LEFTRS - This counter counts the number of seconds that experienced a Low Error Free Throughput Rate (LEFTR), i,e., seconds during which the Error Free Through… |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.47 | ColumnzhoneVdslGinpCurr15MinErrorFreeBits | read-only | current | errorFreeBits - This counter counts the number of bits that crossed the alpha1/beta1 interface (bits available to carry user payload). This is the count for th… |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.48 | ColumnzhoneVdslGinpCurr15MinMinEftr | read-only | current | minEFTR - This performance monitoring parameter records the lowest value of Error Free Throughput during the current interval. This is the count for the curren… |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.49 | ColumnzhoneVdslGinpCurr1DayLeftrSecs | read-only | current | LEFTRS - This counter counts the number of seconds that experienced a Low Error Free Throughput Rate (LEFTR), i,e., seconds during which the Error Free Through… |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.50 | ColumnzhoneVdslGinpCurr1DayErrorFreeBits | read-only | current | errorFreeBits - This counter counts the number of bits that crossed the alpha1/beta1 interface (bits available to carry user payload). This is the count for th… |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.51 | ColumnzhoneVdslGinpCurr1DayMinEftr | read-only | current | minEFTR - This performance monitoring parameter records the lowest value of Error Free Throughput during the current interval. This is the count for the curren… |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.52 | ColumnzhoneVdslGinpPrev1DayLeftrSecs | read-only | current | LEFTRS - This counter counts the number of seconds that experienced a Low Error Free Throughput Rate (LEFTR), i,e., seconds during which the Error Free Through… |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.53 | ColumnzhoneVdslGinpPrev1DayErrorFreeBits | read-only | current | errorFreeBits - This counter counts the number of bits that crossed the alpha1/beta1 interface (bits available to carry user payload). This is the count for th… |
| 1.3.6.1.4.1.5504.5.13.1.1.4.1.54 | ColumnzhoneVdslGinpPrev1DayMinEftr | read-only | current | minEFTR - This performance monitoring parameter records the lowest value of Error Free Throughput during the current interval. This is the count for the previo… |
| 1.3.6.1.4.1.5504.5.13.1.1.5 | TablezhoneVdslPerfIntervalTable | not-accessible | current | This table provides one row for each Vtu performance data collection interval. VDSL physical interfaces are those ifEntries where ifType is equal to vdsl(97). |
| 1.3.6.1.4.1.5504.5.13.1.1.5.1 | RowzhoneVdslPerfIntervalEntry | not-accessible | current | An entry in the vdslPerfIntervalTable. |
| 1.3.6.1.4.1.5504.5.13.1.1.5.1.1 | ColumnzhoneVdslPerfIntervalNumber | not-accessible | current | Performance Data Interval number 1 is the most recent previous interval; interval 96 is 24 hours ago. Intervals 2 to 96 are optional. |
| 1.3.6.1.4.1.5504.5.13.1.1.5.1.2 | ColumnzhoneVdslPerfIntervalLofs | read-only | current | Count of seconds in the interval when there was Loss of Framing. |
| 1.3.6.1.4.1.5504.5.13.1.1.5.1.3 | ColumnzhoneVdslPerfIntervalLoss | read-only | current | Count of seconds in the interval when there was Loss of Signal. |
| 1.3.6.1.4.1.5504.5.13.1.1.5.1.4 | ColumnzhoneVdslPerfIntervalLprs | read-only | current | Count of seconds in the interval when there was Loss of Power. |
| 1.3.6.1.4.1.5504.5.13.1.1.5.1.5 | ColumnzhoneVdslPerfIntervalLols | read-only | current | Count of seconds in the interval when there was Loss of Link. |
| 1.3.6.1.4.1.5504.5.13.1.1.5.1.6 | ColumnzhoneVdslPerfIntervalESs | read-only | current | Count of Errored Seconds (ES) in the interval. An Errored Second is a one-second interval containing one or more CRC anomalies, one or more LOS or LOF defects. |
| 1.3.6.1.4.1.5504.5.13.1.1.5.1.7 | ColumnzhoneVdslPerfIntervalSESs | read-only | current | Count of Severely Errored Seconds in the interval. |
| 1.3.6.1.4.1.5504.5.13.1.1.5.1.8 | ColumnzhoneVdslPerfIntervalUASs | read-only | current | Count of Unavailable Seconds in the interval. |
| 1.3.6.1.4.1.5504.5.13.1.1.5.1.9 | ColumnzhoneVdslPerfIntervalInits | read-only | current | Count of the line initialization attempts during this interval. This count includes both successful and failed attempts. |
| 1.3.6.1.4.1.5504.5.13.1.1.6 | TablezhoneVdslPerf1DayIntervalTable | not-accessible | current | This table provides one row for each VDSL performance data collection interval. This table contains live data from equipment. As such, it is NOT persistent. |
| 1.3.6.1.4.1.5504.5.13.1.1.6.1 | RowzhoneVdslPerf1DayIntervalEntry | not-accessible | current | An entry in the vdslPerf1DayIntervalTable. |
| 1.3.6.1.4.1.5504.5.13.1.1.6.1.1 | ColumnzhoneVdslPerf1DayIntervalNumber | not-accessible | current | History Data Interval number. Interval 1 is the most recent previous day; interval 30 is 30 days ago. Intervals 2 to 30 are optional. |
| 1.3.6.1.4.1.5504.5.13.1.1.6.1.2 | ColumnzhoneVdslPerf1DayIntervalMoniSecs | read-only | current | The amount of time in the 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval dur… |
| 1.3.6.1.4.1.5504.5.13.1.1.6.1.3 | ColumnzhoneVdslPerf1DayIntervalLofs | read-only | current | Count of Loss of Frame (LOF) Seconds during the 1-day interval as measured by vdslPerf1DayIntervalMoniSecs. |
| 1.3.6.1.4.1.5504.5.13.1.1.6.1.4 | ColumnzhoneVdslPerf1DayIntervalLoss | read-only | current | Count of Loss of Signal (LOS) Seconds during the 1-day interval as measured by vdslPerf1DayIntervalMoniSecs. |
| 1.3.6.1.4.1.5504.5.13.1.1.6.1.5 | ColumnzhoneVdslPerf1DayIntervalLprs | read-only | current | Count of Loss of Power (LPR) Seconds during the 1-day interval as measured by vdslPerf1DayIntervalMoniSecs. |
| 1.3.6.1.4.1.5504.5.13.1.1.6.1.6 | ColumnzhoneVdslPerf1DayIntervalLols | read-only | current | Count of Loss of Link (LOL) Seconds during the 1-day interval as measured by vdslPerf1DayIntervalMoniSecs. |
| 1.3.6.1.4.1.5504.5.13.1.1.6.1.7 | ColumnzhoneVdslPerf1DayIntervalESs | read-only | current | Count of Errored Seconds (ES) during the 1-day interval as measured by vdslPerf1DayIntervalMoniSecs. |
| 1.3.6.1.4.1.5504.5.13.1.1.6.1.8 | ColumnzhoneVdslPerf1DayIntervalSESs | read-only | current | Count of Severely Errored Seconds (SES) during the 1-day interval as measured by vdslPerf1DayIntervalMoniSecs. |
| 1.3.6.1.4.1.5504.5.13.1.1.6.1.9 | ColumnzhoneVdslPerf1DayIntervalUASs | read-only | current | Count of Unavailable Seconds (UAS) during the 1-day interval as measured by vdslPerf1DayIntervalMoniSecs. |
| 1.3.6.1.4.1.5504.5.13.1.1.6.1.10 | ColumnzhoneVdslPerf1DayIntervalInits | read-only | current | Count of the line initialization attempts during the 1-day interval as measured by vdslPerf1DayIntervalMoniSecs. This count includes both successful and failed… |
| 1.3.6.1.4.1.5504.5.13.1.1.7 | TablezhoneVdslChanPerfDataTable | not-accessible | current | This table provides one row for each Vtu channel. VDSL channel interfaces are those ifEntries where ifType is equal to interleave(124) or fast(125). |
| 1.3.6.1.4.1.5504.5.13.1.1.7.1 | RowzhoneVdslChanPerfDataEntry | not-accessible | current | An entry in the vdslChanPerfDataTable. |
| 1.3.6.1.4.1.5504.5.13.1.1.7.1.1 | ColumnzhoneVdslChanValidIntervals | read-only | current | Valid Intervals per definition found in HC-PerfHist-TC-MIB. |
| 1.3.6.1.4.1.5504.5.13.1.1.7.1.2 | ColumnzhoneVdslChanInvalidIntervals | read-only | current | Invalid Intervals per definition found in HC-PerfHist-TC-MIB. |
| 1.3.6.1.4.1.5504.5.13.1.1.7.1.3 | ColumnzhoneVdslChanFixedOctets | read-only | current | Count of corrected octets since the unit was last reset. |
| 1.3.6.1.4.1.5504.5.13.1.1.7.1.4 | ColumnzhoneVdslChanBadBlks | read-only | current | Count of uncorrectable blocks since the unit was last reset. |
| 1.3.6.1.4.1.5504.5.13.1.1.7.1.5 | ColumnzhoneVdslChanCurr15MinTimeElapsed | read-only | current | Total elapsed seconds in this interval. |
| 1.3.6.1.4.1.5504.5.13.1.1.7.1.6 | ColumnzhoneVdslChanCurr15MinFixedOctets | read-only | current | Count of corrected octets in this interval. |
| 1.3.6.1.4.1.5504.5.13.1.1.7.1.7 | ColumnzhoneVdslChanCurr15MinBadBlks | read-only | current | Count of uncorrectable blocks in this interval. |
| 1.3.6.1.4.1.5504.5.13.1.1.7.1.8 | ColumnzhoneVdslChan1DayValidIntervals | read-only | current | Valid Intervals per definition found in HC-PerfHist-TC-MIB. |
| 1.3.6.1.4.1.5504.5.13.1.1.7.1.9 | ColumnzhoneVdslChan1DayInvalidIntervals | read-only | current | Invalid Intervals per definition found in HC-PerfHist-TC-MIB. |
| 1.3.6.1.4.1.5504.5.13.1.1.7.1.10 | ColumnzhoneVdslChanCurr1DayTimeElapsed | read-only | current | Number of seconds that have elapsed since the beginning of the current 1-day interval. |
| 1.3.6.1.4.1.5504.5.13.1.1.7.1.11 | ColumnzhoneVdslChanCurr1DayFixedOctets | read-only | current | Count of corrected octets since the beginning of the current 1-day interval. |
| 1.3.6.1.4.1.5504.5.13.1.1.7.1.12 | ColumnzhoneVdslChanCurr1DayBadBlks | read-only | current | Count of uncorrectable blocks since the beginning of the current 1-day interval. |
| 1.3.6.1.4.1.5504.5.13.1.1.8 | TablezhoneVdslChanIntervalTable | not-accessible | current | This table provides one row for each Vtu channel data collection interval. VDSL channel interfaces are those ifEntries where ifType is equal to interleave(124)… |
| 1.3.6.1.4.1.5504.5.13.1.1.8.1 | RowzhoneVdslChanIntervalEntry | not-accessible | current | An entry in the vdslChanIntervalTable. |
| 1.3.6.1.4.1.5504.5.13.1.1.8.1.1 | ColumnzhoneVdslChanIntervalNumber | not-accessible | current | Performance Data Interval number 1 is the most recent previous interval; interval 96 is 24 hours ago. Intervals 2 to 96 are optional. |
| 1.3.6.1.4.1.5504.5.13.1.1.8.1.2 | ColumnzhoneVdslChanIntervalFixedOctets | read-only | current | Count of corrected octets in this interval. |
| 1.3.6.1.4.1.5504.5.13.1.1.8.1.3 | ColumnzhoneVdslChanIntervalBadBlks | read-only | current | Count of uncorrectable blocks in this interval. |
| 1.3.6.1.4.1.5504.5.13.1.1.9 | TablezhoneVdslChan1DayIntervalTable | not-accessible | current | This table provides one row for each VDSL performance data collection interval. This table contains live data from equipment. As such, it is NOT persistent. |
| 1.3.6.1.4.1.5504.5.13.1.1.9.1 | RowzhoneVdslChan1DayIntervalEntry | not-accessible | current | An entry in the vdslChan1DayIntervalTable. |
| 1.3.6.1.4.1.5504.5.13.1.1.9.1.1 | ColumnzhoneVdslChan1DayIntervalNumber | not-accessible | current | History Data Interval number. Interval 1 is the most recent previous day; interval 30 is 30 days ago. Intervals 2 to 30 are optional. |
| 1.3.6.1.4.1.5504.5.13.1.1.9.1.2 | ColumnzhoneVdslChan1DayIntervalMoniSecs | read-only | current | The amount of time in the 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval dur… |
| 1.3.6.1.4.1.5504.5.13.1.1.9.1.3 | ColumnzhoneVdslChan1DayIntervalFixedOctets | read-only | current | Count of corrected octets in this interval. |
| 1.3.6.1.4.1.5504.5.13.1.1.9.1.4 | ColumnzhoneVdslChan1DayIntervalBadBlks | read-only | current | Count of uncorrectable blocks in this interval. |
| 1.3.6.1.4.1.5504.5.13.1.1.11 | TablezhoneVdslLineConfProfileTable | not-accessible | current | This table contains information on the VDSL line configuration. One entry in this table reflects a profile defined by a manager which can be used to configure … |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1 | RowzhoneVdslLineConfProfileEntry | not-accessible | current | Each entry consists of a list of parameters that represents the configuration of a VDSL line. A default profile with an index of 'DEFVAL', will always exist an… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.1 | ColumnzhoneVdslLineConfProfileName | not-accessible | current | This object identifies a row in this table. A default profile with an index of 'DEFVAL', will always exist and its parameters will be set to vendor specific va… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.2 | ColumnzhoneVdslLineConfDownRateMode | read-create | current | Specifies the rate selection behavior for the line in the downstream direction. manual(1) forces the rate to the configured rate adaptAtInit(2) adapts the line… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.3 | ColumnzhoneVdslLineConfUpRateMode | read-create | current | Specifies the rate selection behavior for the line in the upstream direction. manual(1) forces the rate to the configured rate adaptAtInit(2) adapts the line a… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.4 | ColumnzhoneVdslLineConfDownMaxPwr | read-create | current | Specifies the maximum aggregate downstream power level in the range -5.0 to 20.0 dBm. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.5 | ColumnzhoneVdslLineConfUpMaxPwr | read-create | current | Specifies the maximum aggregate upstream power level in the range -13.0 to 20.0 dBm. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.6 | ColumnzhoneVdslLineConfDownMaxSnrMgn | read-create | current | Specifies the maximum downstream Signal/Noise Margin in units of 0.10 dB, for a range of 0 to 31.0 dB. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.7 | ColumnzhoneVdslLineConfDownMinSnrMgn | read-create | current | Specifies the minimum downstream Signal/Noise Margin in units of 0.10 dB, for a range of 0 to 31.0 dB. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.8 | ColumnzhoneVdslLineConfDownTargetSnrMgn | read-create | current | Specifies the target downstream Signal/Noise Margin in units of 0.10 dB, for a range of 0 to 31.0 dB. This is the Noise Margin the transceivers must achieve wi… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.9 | ColumnzhoneVdslLineConfUpMaxSnrMgn | read-create | current | Specifies the maximum upstream Signal/Noise Margin in units of 0.10 dB, for a range of 0 to 31.0 dB. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.10 | ColumnzhoneVdslLineConfUpMinSnrMgn | read-create | current | Specifies the minimum upstream Signal/Noise Margin in units of 0.10 dB, for a range of 0 to 31.0 dB. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.11 | ColumnzhoneVdslLineConfUpTargetSnrMgn | read-create | current | Specifies the target upstream Signal/Noise Margin in units of 0.10 dB, for a range of 0 to 31.0 dB. This is the Noise Margin the transceivers must achieve with… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.12 | ColumnzhoneVdslLineConfDownFastMaxDataRate | read-create | current | Specifies the maximum downstream fast channel data rate in steps of 1000 bits/second. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.13 | ColumnzhoneVdslLineConfDownFastMinDataRate | read-create | current | Specifies the minimum downstream fast channel data rate in steps of 1000 bits/second. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.14 | ColumnzhoneVdslLineConfDownSlowMaxDataRate | read-create | current | Specifies the maximum downstream slow channel data rate in steps of 1000 bits/second. The maximum aggregate downstream transmit speed of the line can be derive… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.15 | ColumnzhoneVdslLineConfDownSlowMinDataRate | read-create | current | Specifies the minimum downstream slow channel data rate in steps of 1000 bits/second. The minimum aggregate downstream transmit speed of the line can be derive… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.16 | ColumnzhoneVdslLineConfUpFastMaxDataRate | read-create | current | Specifies the maximum upstream fast channel data rate in steps of 1000 bits/second. The maximum aggregate upstream transmit speed of the line can be derived fr… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.17 | ColumnzhoneVdslLineConfUpFastMinDataRate | read-create | current | Specifies the minimum upstream fast channel data rate in steps of 1000 bits/second. The minimum aggregate upstream transmit speed of the line can be derived fr… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.18 | ColumnzhoneVdslLineConfUpSlowMaxDataRate | read-create | current | Specifies the maximum upstream slow channel data rate in steps of 1000 bits/second. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.19 | ColumnzhoneVdslLineConfUpSlowMinDataRate | read-create | current | Specifies the minimum upstream slow channel data rate in steps of 1000 bits/second. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.20 | ColumnzhoneVdslLineConfDownRateRatio | read-create | current | For dynamic rate adaptation at startup, the allocation of data rate in excess of the minimum data rate for each channel is controlled by the object. This objec… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.21 | ColumnzhoneVdslLineConfUpRateRatio | read-create | current | For dynamic rate adaptation at startup, the allocation of data rate in excess of the minimum data rate for each channel is controlled by the object. This objec… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.22 | ColumnzhoneVdslLineConfDownMaxInterDelay | read-create | current | Specifies the maximum interleave delay for the downstream slow channel. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.23 | ColumnzhoneVdslLineConfUpMaxInterDelay | read-create | current | Specifies the maximum interleave delay for the upstream slow channel. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.24 | ColumnzhoneVdslLineConfDownPboControl | read-create | current | Downstream power backoff (PBO) control for this line. For transceivers which do not support downstream PBO control, this object MUST be fixed at disabled(1). I… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.25 | ColumnzhoneVdslLineConfUpPboControl | read-create | current | Upstream power backoff (PBO) control for this line. For transceivers which do not support upstream PBO control, this object MUST be fixed at disabled(1). If au… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.26 | ColumnzhoneVdslLineConfDownPboLevel | read-create | current | Specifies the downstream backoff level to be used when vdslLineConfDownPboControl = manual(3). |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.27 | ColumnzhoneVdslLineConfUpPboLevel | read-create | current | Specifies the upstream backoff level to be used when vdslLineConfUpPboControl = manual(3). |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.28 | ColumnzhoneVdslLineConfDeploymentScenario | read-create | current | The VDSL line deployment scenario. When using fttCab(1), the VTU-C is located in a street cabinet. When using fttEx(2), the VTU-C is located at the central off… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.29 | ColumnzhoneVdslLineConfAdslPresence | read-create | current | Indicates presence of ADSL service in the associated cable bundle/binder. none(1) indicates no ADSL service in the bundle adslOverPots(2) indicates ADSL servic… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.30 | ColumnzhoneVdslLineConfApplicableStandard | read-create | current | The VDSL standard to be used for the line. ansi(1) indicates ANSI standard etsi(2) indicates ETSI standard itu(3) indicates ITU standard other(4) indicates a s… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.31 | ColumnzhoneVdslLineConfBandPlan | read-create | current | The VDSL band plan to be used for the line. bandPlan997(1) is to be used for ITU-T G.993.1 Bandplan-B ETSI Bandplan ANSI Plan 997 bandPlan998(2) is to be used … |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.32 | ColumnzhoneVdslLineConfBandPlanFx | read-create | current | The frequency limit between bands D2 and U2 when zhoneVdslLineConfBandPlan is set to bandPlanFx(3). |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.33 | ColumnzhoneVdslLineConfBandOptUsage | read-create | current | Defines the VDSL link use of the optional frequency range [25kHz - 138kHz] (Opt). unused(1) indicates Opt is unused upstream(2) indicates Opt usage is for upst… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.34 | ColumnzhoneVdslLineConfUpPsdTemplate | read-create | current | This object has been modified by Zhone. The upstream PSD template to be used for the line. Here, templateMask1(1) refers to a notched mask that limits the tran… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.35 | ColumnzhoneVdslLineConfDownPsdTemplate | read-create | current | This object has been modified by Zhone. The downstream PSD template to be used for the line. Here, templateMask1(1) refers to a notched mask that limits the tr… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.36 | ColumnzhoneVdslLineConfHamBandMask | read-create | current | The transmit power spectral density mask code, used to avoid interference with HAM (Handheld Amateur Radio) radio bands by introducing power control (notching)… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.37 | ColumnzhoneVdslLineConfCustomNotch1Start | read-create | current | Specifies the start frequency of custom HAM (Handheld Amateur Radio) notch 1. zhoneVdslLineConfCustomNotch1Start MUST be less than or equal to vdslLineConfCust… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.38 | ColumnzhoneVdslLineConfCustomNotch1Stop | read-create | current | Specifies the stop frequency of custom HAM (Handheld Amateur Radio) notch 1. zhoneVdslLineConfCustomNotch1Stop MUST be greater than or equal to vdslLineConfCus… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.39 | ColumnzhoneVdslLineConfCustomNotch2Start | read-create | current | Specifies the start frequency of custom HAM (Handheld Amateur Radio) notch 2. zhoneVdslLineConfCustomNotch2Start MUST be less than or equal to vdslLineConfCust… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.40 | ColumnzhoneVdslLineConfCustomNotch2Stop | read-create | current | Specifies the stop frequency of custom HAM (Handheld Amateur Radio) notch 2. zhoneVdslLineConfCustomNotch2Stop MUST be greater than or equal to vdslLineConfCus… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.41 | ColumnzhoneVdslLineConfDownTargetSlowBurst | read-create | current | Specifies the target level of impulse noise (burst) protection for an interleaved (slow) channel. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.42 | ColumnzhoneVdslLineConfUpTargetSlowBurst | read-create | current | Specifies the target level of impulse noise (burst) protection for an interleaved (slow) channel. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.43 | ColumnzhoneVdslLineConfDownMaxFastFec | read-create | current | This parameter provisions the maximum level of Forward Error Correction (FEC) redundancy related overhead to be maintained for a fast channel. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.44 | ColumnzhoneVdslLineConfUpMaxFastFec | read-create | current | This parameter provisions the maximum level of Forward Error Correction (FEC) redundancy related overhead to be maintained for a fast channel. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.45 | ColumnzhoneVdslLineConfLineType | read-create | current | This parameter provisions the VDSL physical entity at start-up by defining whether and how the line will be channelized, i.e., which channel type(s) are suppor… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.47 | ColumnzhoneVdslLineConfProfRowStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to 'active'. When 'active… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.48 | ColumnzhoneVdslLineConfTransmissionMode | read-create | current | The transmission standard to be used for the line. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.49 | ColumnzhoneVdslLineConfVdsl2Profile | read-create | current | The VDSL2 standard to be used for the line. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.50 | ColumnzhoneVdslLineConfVdslMode | read-create | current | Controls which VDSL modes are available on the line. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.51 | ColumnzhoneVdslLineConfPboElectricalOverride | read-create | current | Override electrical length estimated by VUTU_C. The special value 256 means do not perform override. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.52 | ColumnzhoneVdslLineConfAutoModeCrtrn | read-create | current | Determines the policy to select optimal mode of oepration. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.53 | ColumnzhoneVdslLineConfNetworkTimingRef | read-only | current | Enable/disable reference clock source. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.54 | ColumnzhoneVdslLineConfAdslBandMode | read-create | current | Specifies whether the XDSL can use the ADSL spectrum or not. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.55 | ColumnzhoneVdslLineConfAdslBandModeEndFreq | read-create | current | Specifies the ADSL band end frequency when the ADSL band usage is not allowed. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.56 | ColumnzhoneVdslLineConfSeltEchoMeasurementTime | read-create | current | Contains the SELT echo measurement time |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.57 | ColumnzhoneVdslLineConfSeltNoiseMeasurementTime | read-create | current | Contains the SELT noise measurement time. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.58 | ColumnzhoneVdslLineConfSeltAgc | read-create | current | Contains the SELT AGC gain value. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.59 | ColumnzhoneVdslLineConfDownTrellis | read-create | current | Enables/disables downstream Trellis coding. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.60 | ColumnzhoneVdslLineConfUpTrellis | read-create | current | Enables/disables upstream Trellis coding. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.61 | ColumnzhoneVdslLineConfDownMaxAggregateTxPwr | read-create | current | Maximum total power that is allowed to be transmitted in the downstream direction. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.62 | ColumnzhoneVdslLineConfUpMaxAggregateTxPwr | read-create | current | Maximum total power that is allowed to be transmitted in the upstream direction. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.63 | ColumnzhoneVdslLineConfDownMaxPsd | read-create | current | The maximum power spectral density level allowed on the line at the transmitter output downstream for initialization and showtime signals. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.64 | ColumnzhoneVdslLineConfUpMaxPsd | read-create | current | The maximum power spectral density level allowed on the line at the transmitter output upstream for initialization and showtime signals. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.65 | ColumnzhoneVdslLineConfDownPsdShape | read-create | current | Maximum transmit PSD allowed in the downstream channel on a VDSL2 line. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.66 | ColumnzhoneVdslLineConfUpPsdShape | read-create | current | Maximum transmit PSD allowed in the upstream channel on a VDSL2 line. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.67 | ColumnzhoneVdslLineConfDownVirtualNoiseSnrMode | read-create | current | Downstream virtual noise SNR mode on a VDSL2 line. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.68 | ColumnzhoneVdslLineConfUpVirtualNoiseSnrMode | read-create | current | Upstream virtual noise SNR mode on a VDSL2 line. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.69 | ColumnzhoneVdslLineConfDownErasureDetectionFast | read-create | current | Indicates whether the erasure detection mechanism should be enabled or disabled in the downstream fast channel. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.70 | ColumnzhoneVdslLineConfUpErasureDetectionFast | read-create | current | Indicates whether the erasure detection mechanism should be enabled or disabled in the downstream fast channel. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.71 | ColumnzhoneVdslLineConfDownErasureDetectionInterleave | read-create | current | Indicates whether the erasure detection mechanism should be enabled or disabled in the downstream slow channel (interleave). |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.72 | ColumnzhoneVdslLineConfUpErasureDetectionInterleave | read-create | current | Indicates whether the erasure detection mechanism should be enabled or disabled in the uptream slow channel (interleave). |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.73 | ColumnzhoneVdslLineConfDownGhsA43TonePwr | read-create | current | Determines the mode of the downstream tones power used during handshake, during A43 mode. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.74 | ColumnzhoneVdslLineConfDownGhsB43TonePwr | read-create | current | Determines the mode of the downstream tones power used during handshake, during B43 mode. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.75 | ColumnzhoneVdslLineConfDownGhsA43cTonePwr | read-create | current | Determines the mode of the downstream tones power used during handshake, during A43c mode. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.76 | ColumnzhoneVdslLineConfDownGhsV43TonePwr | read-create | current | Determines the mode of the downstream tone power used during handshake, during V43 mode. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.77 | ColumnzhoneVdslLineConfDownGhsA43TonePwrMaxLvl | read-create | current | Determines the maximum power of downstream tones used, in manual mode, during handshake in A43 mode. A value of -99 indicates no power used. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.78 | ColumnzhoneVdslLineConfDownGhsB43TonePwrMaxLvl | read-create | current | Determines the maximum power of downstream tones used, in manual mode, during handshake in B43 mode. A value of -99 indicates no power used. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.79 | ColumnzhoneVdslLineConfDownGhsA43cTonePwrMaxLvl | read-create | current | Determines the maximum power of downstream tones used, in manual mode, during handshake in A43c mode. A value of -99 indicates no power used. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.80 | ColumnzhoneVdslLineConfDownGhsV43TonePwrMaxLvl | read-create | current | Determines the maximum power of downstream tones used, in manual mode, during handshake in V43 mode. A value of -99 indicates no power used. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.81 | ColumnzhoneVdslLineConfDownRsCoding | read-create | current | Parameter to enable/disable RS Coding in downstream channel. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.82 | ColumnzhoneVdslLineConfUpRsCoding | read-create | current | Parameter to enable/disable RS Coding in upsream channel. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.83 | ColumnzhoneVdslLineConfUpPboPsdTemplate | read-create | current | Specifies the maximum received PSD allowed in the upstream channel on the VDSLx line. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.84 | ColumnzhoneVdslLineConfUpPboPsdParamA1 | read-create | current | Upstream power backoff PSD parameter A1. This parameter is only used if the mask selection is set to PSDMaskABParameters |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.85 | ColumnzhoneVdslLineConfUpPboPsdParamA2 | read-create | current | Upstream power backoff PSD parameter A2. This parameter is only used if the mask selection is set to PSDMaskABParameters |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.86 | ColumnzhoneVdslLineConfUpPboPsdParamB1 | read-create | current | Upstream power backoff PSD parameter B1. This parameter is only used if the mask selection is set to PSDMaskABParameters |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.87 | ColumnzhoneVdslLineConfUpPboPsdParamB2 | read-create | current | Upstream power backoff PSD parameter B2. This parameter is only used if the mask selection is set to PSDMaskABParameters |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.88 | ColumnzhoneVdslLineConfDownDownshiftSnrMgn | read-create | current | Configured Signal/Noise Margin for rate downshift. If the noise margin falls below this level, the modem should attempt to decrease its transmit rate. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.89 | ColumnzhoneVdslLineConfDownUpshiftSnrMgn | read-create | current | Configured Signal/Noise Margin for rate upshift. If the noise margin rises above this level, the modem should attempt to increase its transmit rate. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.90 | ColumnzhoneVdslLineConfDownMinDownshiftTime | read-create | current | Minimum time that the current margin is below DownshiftSnrMgn before a downshift occurs. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.91 | ColumnzhoneVdslLineConfDownMinUpshiftTime | read-create | current | Minimum time that the current margin is above UpshiftSnrMgn before an upshift occurs. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.92 | ColumnzhoneVdslLineConfUpDownshiftSnrMgn | read-create | current | Configured Signal/Noise Margin for rate downshift. If the noise margin falls below this level, the modem should attempt to decrease its transmit rate. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.93 | ColumnzhoneVdslLineConfUpUpshiftSnrMgn | read-create | current | Configured Signal/Noise Margin for rate upshift. If the noise margin rises above this level, the modem should attempt to increase its transmit rate. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.94 | ColumnzhoneVdslLineConfUpMinDownshiftTime | read-create | current | Minimum time that the current margin is below DownshiftSnrMgn before a downshift occurs. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.95 | ColumnzhoneVdslLineConfUpMinUpshiftTime | read-create | current | Minimum time that the current margin is above UpshiftSnrMgn before an upshift occurs. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.96 | ColumnzhoneVdslLineConfDownMinTxThresholdAlarm | read-create | current | Minimum CO Tx Sync rate threshold alarm. If set to 0, this field is disregarded. Otherwise, if Tx Sync rate falls below this value, a trap and alarm will be is… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.97 | ColumnzhoneVdslLineConfUpMinTxThresholdAlarm | read-create | current | Minimum CPE Tx Sync rate threshold alarm. If set to 0, this field is disregarded. Otherwise, if Tx Sync rate falls below this value, a trap and alarm will be i… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.98 | ColumnzhoneVdslLineConfPotsBypassRelayMaxDuration | read-create | current | The maximum duration in seconds that an Adsl Pots Low Pass Filter Bypass Relay will remain active (meaning closed/energized). As a fail-safe mechanism, the rel… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.99 | ColumnzhoneVdslLineConfDMTConfMode | read-create | current | Discrete Multi-Tone parameter that selects whether there is overlap (echoCancel) or no overlap (freqDivMux) of bins. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.100 | ColumnzhoneVdslLineConfDownBitSwap | read-create | current | Enable or disable downstream bit swap. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.101 | ColumnzhoneVdslLineConfUpBitSwap | read-create | current | Enable or disable upstream bit swap. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.102 | ColumnzhoneVdslLineConfAdslAnnexMModeEnabled | read-create | current | This object indicates whether Annex-M mode is enabled on the Adsl modem. If this object is set to 'true' then Annex-M mode is enabled. If it is set to 'false t… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.103 | ColumnzhoneVdslLineConfAdslAnnexMPsdMask | read-create | current | This object specifies the maximum transmit PSD allowed in the downstream channel on an BIS Annex-M line. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.104 | ColumnzhoneVdslLineConfUs0BoundaryTone | read-create | current | This object configures the upper boundary of US0. US0 is used in long reach mode when there is no more capacity in US1. The switchover is typically around 3500… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.105 | ColumnzhoneVdslLineConfDownInp | read-create | current | The minimum impulse noise protection for the downstream bearer channel expressed in symbols. One symbol equals 250 uS. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.106 | ColumnzhoneVdslLineConfUpInp | read-create | current | The minimum impulse noise protection for the upstream bearer channel expressed in symbols. One symbol equals 250 uS. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.107 | ColumnzhoneVdslLineConfDownMaxInterleavingDelay | read-create | current | The maximum inteleaving delay in the downstream direction. A value of zero indicates no delay introduced. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.108 | ColumnzhoneVdslLineConfUpMaxInterleavingDelay | read-create | current | The maximum inteleaving delay in the upstream direction. A value of zero indicates no delay introduced. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.109 | ColumnzhoneVdslLineConfDownPsdMaskEnable | read-create | current | This object selects the Psd Mask in the downstream direction. 'standard' : use the PSD Mask specified in the object zhoneVdslLineConfDownPsdSelect 'mod' : use … |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.110 | ColumnzhoneVdslLineConfUpPsdMaskEnable | read-create | current | This object selects the Psd Mask in the upstream direction. 'standard' : use the PSD Mask specified in the object zhoneVdslLineConfDownPsdSelect 'mod' : use th… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.111 | ColumnzhoneVdslLineConfDownPsdMaskSelect | read-create | current | This object selects one of the standards based PSD mask for the downstream direction. The object zhoneVdslLineConfDownPsdMaskEnable must be set to 'standard' f… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.112 | ColumnzhoneVdslLineConfUpPsdMaskSelect | read-create | current | This object selects one of the standards based PSD mask for the upstream direction. The object zhoneVdslLineConfUpPsdMaskEnable must be set to 'standard' for t… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.113 | ColumnzhoneVdslLineEnableTrellisCoding | read-create | current | Enables/disables Trellis coding. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.114 | ColumnzhoneVdslLineEnableRsCoding | read-create | current | Enables/disables Rs coding. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.115 | ColumnzhoneVdslLineConfPsdShape | read-create | current | Maximum transmit PSD allowed on a VDSL2 line. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.116 | ColumnzhoneVdslLineConfDownPhyRSupport | read-create | current | Enable or disable downstream PHYR. Only supported by Broadcom PHYR ports. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.117 | ColumnzhoneVdslLineConfUpPhyRSupport | read-create | current | Enable or disable upstream PHYR. Only supported by Broadcom PHYR ports. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.118 | ColumnzhoneVdslLineConfDownPhyRmaxINP | read-create | current | PHYR maximum downstream impulse noise protection. A value of 0 specifies no protection. The values 5 through 160 specify the number of symbols in 1/10 incremen… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.119 | ColumnzhoneVdslLineConfUpPhyRmaxINP | read-create | current | PHYR maximum upstream impulse noise protection. A value of 0 specifies no protection. The values 5 through 160 specify the number of symbols in 1/10 increments… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.120 | ColumnzhoneVdslLineConfDownPhyRminRSoverhead | read-create | current | PHYR minimum downstream RS overhead. Only supported by Broadcom PHYR ports. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.121 | ColumnzhoneVdslLineConfUpPhyRminRSoverhead | read-create | current | PHYR minimum upstream RS overhead. Only supported by Broadcom PHYR ports. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.122 | ColumnzhoneVdslLineConfDownPhyRRtxRatio | read-create | current | PHYR minimum downstream fraction of the line rate allocated for retransmission. Only supported by Broadcom PHYR ports. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.123 | ColumnzhoneVdslLineConfUpPhyRRtxRatio | read-create | current | PHYR minimum upstream fraction of the line rate allocated for retransmission. Only supported by Broadcom PHYR ports. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.124 | ColumnzhoneVdslLineConfUpPboPsdParamA3 | read-create | current | Upstream power backoff PSD parameter A3. This parameter is only used if the mask selection is set to PSDMaskABParameters |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.125 | ColumnzhoneVdslLineConfUpPboPsdParamA4 | read-create | current | Upstream power backoff PSD parameter A4. This parameter is only used if the mask selection is set to PSDMaskABParameters |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.126 | ColumnzhoneVdslLineConfUpPboPsdParamB3 | read-create | current | Upstream power backoff PSD parameter B3. This parameter is only used if the mask selection is set to PSDMaskABParameters |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.127 | ColumnzhoneVdslLineConfUpPboPsdParamB4 | read-create | current | Upstream power backoff PSD parameter B4. This parameter is only used if the mask selection is set to PSDMaskABParameters |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.128 | ColumnzhoneVdslLineConfFallbackDefaultVpi | read-create | current | ATM VPI to be used by the line when it trains in ADSL/ATM mode and bridges are configured for single-vc mode |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.129 | ColumnzhoneVdslLineConfFallbackDefaultVci | read-create | current | ATM VCI to be used by the line when it trains in ADSL/ATM mode and bridges are configured for single-vc mode |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.130 | ColumnzhoneVdslLineConfDownGinpSupport | read-create | current | Enable or disable downstream G.INP / ITU-G.998.4. Only supported by Broadcom ports. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.131 | ColumnzhoneVdslLineConfUpGinpSupport | read-create | current | Enable or disable upstream G.INP / ITU-G.998.4. Only supported by Broadcom ports. |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.132 | ColumnzhoneVdslLineConfDownGinpEtrMax | read-create | current | gInpEtrMax - Maximum allowed value for downstream expected throughput (ETR) in kbit/s. The valid values are all multiples of 8 from 0 to the maximum of the val… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.133 | ColumnzhoneVdslLineConfUpGinpEtrMax | read-create | current | gInpEtrMax - Maximum allowed value for upstream expected throughput (ETR) in kbit/s. The valid values are all multiples of 8 from 0 to the maximum of the valid… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.134 | ColumnzhoneVdslLineConfDownGinpEtrMin | read-create | current | gInpEtrMin - Minimum allowed value for downstream expected throughput (ETR) in kbit/s. The valid values are all multiples of 8 from 0 to the maximum of the val… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.135 | ColumnzhoneVdslLineConfUpGinpEtrMin | read-create | current | gInpEtrMin - Minimum allowed value for upstream expected throughput (ETR) in kbit/s. The valid values are all multiples of 8 from 0 to the maximum of the valid… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.136 | ColumnzhoneVdslLineConfDownGinpNdrMax | read-create | current | gInpNdrMax - Maximum allowed value for downstream net data rate (NDR) in kbit/s. The valid values are all multiples of 8 from 0 to the maximum of the valid val… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.137 | ColumnzhoneVdslLineConfUpGinpNdrMax | read-create | current | gInpNdrMax - Maximum allowed value for upstream net data rate (NDR) in kbit/s. The valid values are all multiples of 8 from 0 to the maximum of the valid value… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.138 | ColumnzhoneVdslLineConfDownGinpShineRatio | read-create | current | gInpShineRatio - The downstream loss of rate in a 1 second interval expressed as a fraction of NDR due to a single high impulse noise event (SHINE) impulse noi… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.139 | ColumnzhoneVdslLineConfUpGinpShineRatio | read-create | current | gInpShineRatio - The upstream loss of rate in a 1 second interval expressed as a fraction of NDR due to a single high impulse noise event (SHINE) impulse noise… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.140 | ColumnzhoneVdslLineConfDownGinpLeftrThreshold | read-create | current | gInpLeftrThreshold - The downstream rate Threshold below which the Low Error Free Rate (LEFTR) defect is declared. The threshold used to declare leftr defects … |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.141 | ColumnzhoneVdslLineConfUpGinpLeftrThreshold | read-create | current | gInpLeftrThreshold - The upstream rate Threshold below which the Low Error Free Rate (LEFTR) defect is declared. The threshold used to declare leftr defects is… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.142 | ColumnzhoneVdslLineConfDownGinpMaxDelay | read-create | current | gInpMaxDelay - The maximum downstream delay in ms. This is the upper limit for the delay that is added to the transmission delay only caused by retransmissions… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.143 | ColumnzhoneVdslLineConfUpGinpMaxDelay | read-create | current | gInpMaxDelay - The maximum upstream delay in ms. This is the upper limit for the delay that is added to the transmission delay only caused by retransmissions. … |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.144 | ColumnzhoneVdslLineConfDownGinpMinDelay | read-create | current | gInpMinDelay - The minimum downstream delay in ms. This is the lower limit for the delay that is added to the transmission delay caused by retransmissions only… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.145 | ColumnzhoneVdslLineConfUpGinpMinDelay | read-create | current | gInpMinDelay - The minimum upstream delay in ms. This is the lower limit for the delay that is added to the transmission delay caused by retransmissions only. … |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.146 | ColumnzhoneVdslLineConfDownGinpMin | read-create | current | ginpMin - The minimum downstream impulse noise protection (INP) against single high impulse noise event (SHINE) in discrete multitone (DMT) symbols. The valid … |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.147 | ColumnzhoneVdslLineConfUpGinpMin | read-create | current | ginpMin - The minimum upstream impulse noise protection (INP) against single high impulse noise event (SHINE) in discrete multitone (DMT) symbols. The valid va… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.148 | ColumnzhoneVdslLineConfDownGinpMinRSoverhead | read-create | current | gInpMinRSoverhead - This value specifies the downstream bandwidth reserved for RS (reed-solomon) codewords. The minimum guaranteed R/N ratio. The unit is 1/256… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.149 | ColumnzhoneVdslLineConfUpGinpMinRSoverhead | read-create | current | gInpMinRSoverhead - This value specifies the upstream bandwidth reserved for RS (reed-solomon) codewords. The minimum guaranteed R/N ratio. The unit is 1/256th… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.150 | ColumnzhoneVdslLineConfDownGinpReinCfg | read-create | current | gInpReinCfg - The minimum downstream impulse protection against electrical repetitive impulse noise (REIN) in DMT symbols. The valid values are all integers fr… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.151 | ColumnzhoneVdslLineConfUpGinpReinCfg | read-create | current | gInpReinCfg - The minimum upstream impulse protection against electrical repetitive impulse noise (REIN) in DMT symbols. The valid values are all integers from… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.152 | ColumnzhoneVdslLineConfDownGinpReinFreq | read-write | current | ginpReinFreq specifies the frequency of REIN inter-arrival time. It is used in the Channel Initialization Policy and on-line reconfiguration procedures. REIN i… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.153 | ColumnzhoneVdslLineConfUpGinpReinFreq | read-write | current | ginpReinFreq specifies the frequency of REIN inter-arrival time. It is used in the Channel Initialization Policy and on-line reconfiguration procedures. REIN i… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.154 | ColumnzhoneVdslLineConfDownGinpRtxMode | read-create | current | gInpRtxMode - Downstream retransmission Mode (RTX MODE). The RTX_MODE is a configuration parameter used to control activation of retransmission during initiali… |
| 1.3.6.1.4.1.5504.5.13.1.1.11.1.155 | ColumnzhoneVdslLineConfUpGinpRtxMode | read-create | current | gInpRtxMode - Upstream retransmission Mode (RTX MODE). The RTX_MODE is a configuration parameter used to control activation of retransmission during initializa… |
| 1.3.6.1.4.1.5504.5.13.1.1.20 | TablezhoneVdslLineAlarmConfProfileTable | not-accessible | current | This table contains information on the VDSL line alarm configuration. One entry in this table reflects a profile defined by a manager which can be used to conf… |
| 1.3.6.1.4.1.5504.5.13.1.1.20.1 | RowzhoneVdslLineAlarmConfProfileEntry | not-accessible | current | Each entry consists of a list of parameters that represents the configuration of a VDSL line alarm profile. A default profile with an index of 'DEFVAL', will a… |
| 1.3.6.1.4.1.5504.5.13.1.1.20.1.1 | ColumnzhoneVdslLineAlarmConfProfileName | not-accessible | current | The name for this profile as specified by an administrator. |
| 1.3.6.1.4.1.5504.5.13.1.1.20.1.2 | ColumnzhoneVdslLineAlarmConfThresh15MinLofs | read-create | current | This object configures the threshold for the number of loss of frame seconds (LOFs) within any given 15-minute performance data collection interval. If the val… |
| 1.3.6.1.4.1.5504.5.13.1.1.20.1.3 | ColumnzhoneVdslLineAlarmConfThresh15MinLoss | read-create | current | This object configures the threshold for the number of loss of signal seconds (LOSs) within any given 15-minute performance data collection interval. If the va… |
| 1.3.6.1.4.1.5504.5.13.1.1.20.1.4 | ColumnzhoneVdslLineAlarmConfThresh15MinLprs | read-create | current | This object configures the threshold for the number of loss of power seconds (LPRs) within any given 15-minute performance data collection interval. If the val… |
| 1.3.6.1.4.1.5504.5.13.1.1.20.1.5 | ColumnzhoneVdslLineAlarmConfThresh15MinLols | read-create | current | This object configures the threshold for the number of loss of link seconds (LOLs) within any given 15-minute performance data collection interval. If the valu… |
| 1.3.6.1.4.1.5504.5.13.1.1.20.1.6 | ColumnzhoneVdslLineAlarmConfThresh15MinESs | read-create | current | This object configures the threshold for the number of errored seconds (ESs) within any given 15-minute performance data collection interval. If the value of e… |
| 1.3.6.1.4.1.5504.5.13.1.1.20.1.7 | ColumnzhoneVdslLineAlarmConfThresh15MinSESs | read-create | current | This object configures the threshold for the number of severely errored seconds (SESs) within any given 15-minute performance data collection interval. If the … |
| 1.3.6.1.4.1.5504.5.13.1.1.20.1.8 | ColumnzhoneVdslLineAlarmConfThresh15MinUASs | read-create | current | This object configures the threshold for the number of unavailable seconds (UASs) within any given 15-minute performance data collection interval. If the value… |
| 1.3.6.1.4.1.5504.5.13.1.1.20.1.9 | ColumnzhoneVdslLineAlarmConfInitFailure | read-create | current | This object specifies if a vdslInitFailureNotification notification will be generated if an initialization failure occurs. |
| 1.3.6.1.4.1.5504.5.13.1.1.20.1.10 | ColumnzhoneVdslLineAlarmConfProfRowStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to 'active'. When 'active… |
| 1.3.6.1.4.1.5504.5.13.1.1.20.1.11 | ColumnzhoneVdslLineAlarmConfThresh1DayLofs | read-create | current | This object configures the threshold for the number of loss of frame seconds (LOFs) within any given 1-day performance data collection interval. If the value o… |
| 1.3.6.1.4.1.5504.5.13.1.1.20.1.12 | ColumnzhoneVdslLineAlarmConfThresh1DayLoss | read-create | current | This object configures the threshold for the number of loss of signal seconds (LOSs) within any given 1-day performance data collection interval. If the value … |
| 1.3.6.1.4.1.5504.5.13.1.1.20.1.13 | ColumnzhoneVdslLineAlarmConfThresh1DayLprs | read-create | current | This object configures the threshold for the number of loss of power seconds (LPRs) within any given 1-day performance data collection interval. If the value o… |
| 1.3.6.1.4.1.5504.5.13.1.1.20.1.14 | ColumnzhoneVdslLineAlarmConfThresh1DayLols | read-create | current | This object configures the threshold for the number of loss of link seconds (LOLs) within any given 1-day performance data collection interval. If the value of… |
| 1.3.6.1.4.1.5504.5.13.1.1.20.1.15 | ColumnzhoneVdslLineAlarmConfThresh1DayESs | read-create | current | This object configures the threshold for the number of errored seconds (ESs) within any given 1-day performance data collection interval. If the value of error… |
| 1.3.6.1.4.1.5504.5.13.1.1.20.1.16 | ColumnzhoneVdslLineAlarmConfThresh1DaySESs | read-create | current | This object configures the threshold for the number of severely errored seconds (SESs) within any given 1-day performance data collection interval. If the valu… |
| 1.3.6.1.4.1.5504.5.13.1.1.20.1.17 | ColumnzhoneVdslLineAlarmConfThresh1DayUASs | read-create | current | This object configures the threshold for the number of unavailable seconds (UASs) within any given 1-day performance data collection interval. If the value of … |
| 1.3.6.1.4.1.5504.5.13.1.1.20.1.18 | ColumnzhoneVdslLineAlarmConfThresh1DayInitFailure | read-create | current | This object specifies if a vdslThresh1DayInitFailureNotification notification will be generated if an initialization failure occurs. |
| 1.3.6.1.4.1.5504.5.13.1.1.21 | TablezhoneVdslCustomNotchConfProfileTable | not-accessible | current | This table contains HAM (Handheld Amateur Radio) custom notch information. |
| 1.3.6.1.4.1.5504.5.13.1.1.21.1 | RowzhoneVdslCustomNotchConfProfileEntry | not-accessible | current | Each VDSL port can have custom notches. |
| 1.3.6.1.4.1.5504.5.13.1.1.21.1.1 | ColumnzhoneVdslCustomNotchConfId | read-create | current | Each VDSL2 port can have eight (8) custom notch pairs. |
| 1.3.6.1.4.1.5504.5.13.1.1.21.1.2 | ColumnzhoneVdslCustomNotchConfStart | read-create | current | Specifies the start frequency of custom HAM (Handheld Amateur Radio) notch. zhoneVdslCustomNotchConfStart MUST be less than or equal to zhoneVdslCustomNotchCon… |
| 1.3.6.1.4.1.5504.5.13.1.1.21.1.3 | ColumnzhoneVdslCustomNotchConfStop | read-create | current | Specifies the end frequency of custom HAM (Handheld Amateur Radio) notch. zhoneVdslCustomNotchConfStop MUST be greater than or equal to zhoneVdslCustomNotchCon… |
| 1.3.6.1.4.1.5504.5.13.1.1.22 | TablezhoneVdslVectDataTable | not-accessible | current | Used to retrieve the vectoring packet counts. |
| 1.3.6.1.4.1.5504.5.13.1.1.22.1 | RowzhoneVdslVectDataEntry | not-accessible | current | Vectoring Packet statistics data |
| 1.3.6.1.4.1.5504.5.13.1.1.22.1.1 | ColumnzhoneVdslVectDataEsDsCounter | read-only | current | Error Sample Downstream Packet Counter |
| 1.3.6.1.4.1.5504.5.13.1.1.22.1.2 | ColumnzhoneVdslVectDataEsUsCounter | read-only | current | Error Sample Upstream Packet Counter |
| 1.3.6.1.4.1.5504.5.13.1.1.22.1.3 | ColumnzhoneVdslVectDataIsDsFeValid | read-only | current | Is Downstream Fe Valid |
| 1.3.6.1.4.1.5504.5.13.1.1.22.1.4 | ColumnzhoneVdslVectDataEsFeDsCounter | read-only | current | Error Sample Fe Downstream Counter |
| 1.3.6.1.4.1.5504.5.13.1.3 | NodezhoneVdslConformance | |||
| 1.3.6.1.4.1.5504.5.13.1.3.1 | NodezhoneVdslGroups | |||
| 1.3.6.1.4.1.5504.5.13.1.3.1.1 | GroupzhoneVdslGroup | current | A collection of objects providing information about a VDSL Line. | |
| 1.3.6.1.4.1.5504.5.13.1.3.1.2 | GroupzhoneVdslNotificationGroup | current | This group supports notifications of significant conditions associated with VDSL Lines. | |
| 1.3.6.1.4.1.5504.5.13.1.3.2 | NodezhoneVdslCompliances | |||
| 1.3.6.1.4.1.5504.5.13.1.3.2.1 | CompliancezhoneVdslLineMibCompliance | current | The compliance statement for SNMP entities which manage VDSL interfaces. | |
| 1.3.6.1.4.1.5504.6.110 | IdentityzhoneVdslMib | The MIB module defining objects for the management of a pair of VDSL transceivers at each end of the VDSL line. Each such line has an entry in an ifTable which… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ZhoneVdslLineCodingType | INTEGER { other(1), mcm(2), scm(3) } | current | |
| ZhoneVdslLineEntity | INTEGER { vtuc(1), vtur(2) } | current |