adtran/ADTRAN-GEN-Y1731-MIB
253 objects
This MIB defines the objects for the Y.1731 MIB.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.664.5.75.2.1 | NodeadGenY1731MIBObjects | |||
| 1.3.6.1.4.1.664.5.75.2.1.1 | NodeadGenY1731Config | |||
| 1.3.6.1.4.1.664.5.75.2.1.1.1 | ScalaradGenY1731Enable | read-write | current | This OID is used to enable/disable Y.1731. |
| 1.3.6.1.4.1.664.5.75.2.1.1.2 | ScalaradGenY1731BulkDataExportInterval | read-write | current | The interval, in seconds, between Y.1731 PM file transfers to the management server. The interval must be between 30 and 300 seconds. The default interval valu… |
| 1.3.6.1.4.1.664.5.75.2.1.1.3 | ScalaradGenY1731LinktraceCacheHoldTime | read-write | current | The Linktrace cache hold time specified in minutes. Linktrace replies in the Linktrace Reply Table (adGenY1731LocalMepLtrTable) will age out after the configur… |
| 1.3.6.1.4.1.664.5.75.2.1.1.4 | ScalaradGenY1731LinktraceCacheSize | read-write | current | The Linktrace cache size is the maximum entries that can be added stored in the Linktrace Reply Table (adGenY1731LocalMepLtrTable). Once the maximum size is re… |
| 1.3.6.1.4.1.664.5.75.2.1.2 | NodeadGenY1731Meg | |||
| 1.3.6.1.4.1.664.5.75.2.1.2.1 | ScalaradGenY1731MegMaxNumber | read-only | current | Maximum number of allowed Maintenenance Entity Groups. |
| 1.3.6.1.4.1.664.5.75.2.1.2.2 | ScalaradGenY1731MegCurrentNumber | read-only | current | Current number of MEGs. |
| 1.3.6.1.4.1.664.5.75.2.1.2.3 | ScalaradGenY1731MegLastCreateError | read-only | current | The reason for the last error that occured while attempting to create an entry in the Maintenance Entity Group Table (adGenY1731MegTable). |
| 1.3.6.1.4.1.664.5.75.2.1.2.4 | TableadGenY1731MegTable | not-accessible | current | The Y.1731 MEG table. |
| 1.3.6.1.4.1.664.5.75.2.1.2.4.1 | RowadGenY1731MegEntry | not-accessible | current | An entry in the Y.1731 MEG table. |
| 1.3.6.1.4.1.664.5.75.2.1.2.4.1.1 | ColumnadGenY1731MegLevel | not-accessible | current | MEG level for the MEG. |
| 1.3.6.1.4.1.664.5.75.2.1.2.4.1.2 | ColumnadGenY1731MegNameFormat | not-accessible | current | char-string - This is an IETF RFC 2579 DisplayString, with the exception that the character codes 0-31 (decimal) are not used. icc-umc - this consists of two s… |
| 1.3.6.1.4.1.664.5.75.2.1.2.4.1.3 | ColumnadGenY1731MegNameLengthAndName | not-accessible | current | If adGenY1731MegNameFormat is char-string or icc-umc - The First octet represents the total length in octets of the MEG Name. Octets 2-46 represent the MEG Nam… |
| 1.3.6.1.4.1.664.5.75.2.1.2.4.1.4 | ColumnadGenY1731MegRowStatus | read-create | current | This OID is used to create and delete the MEG. The only supported settings are createAndGo, createAndWait, and destroy. |
| 1.3.6.1.4.1.664.5.75.2.1.2.4.1.5 | ColumnadGenY1731MegServiceTypeValueList | read-create | current | Octet string which defines the service type and value that maintenance points in the MEG reside and operate on. Expected format: First octet represents the ove… |
| 1.3.6.1.4.1.664.5.75.2.1.2.4.1.6 | ColumnadGenY1731MegCcmInterval | read-create | current | Interval between CCM transmissions to be used by all MEPs in the MEG. Default value is 1-second. |
| 1.3.6.1.4.1.664.5.75.2.1.2.4.1.7 | ColumnadGenY1731MegLocalMepConfigTableLastCreateError | read-only | current | The reason for the last error that occured while attempting to create an entry in the MEG's local MEP Config Table (adGenY1731LocalMepConfigTable). |
| 1.3.6.1.4.1.664.5.75.2.1.2.4.1.8 | ColumnadGenY1731MegDisplayName | read-only | current | Represents the MEG Name associated with the MEG. |
| 1.3.6.1.4.1.664.5.75.2.1.2.5 | NodeadGenY1731MegMepList | |||
| 1.3.6.1.4.1.664.5.75.2.1.2.5.1 | NodeadGenY1731MegMepListScalars | |||
| 1.3.6.1.4.1.664.5.75.2.1.2.5.1.1 | ScalaradGenY1731MegMepListMaxNumber | read-only | current | Maximum number of allowed Maintenenance End Points that the device supports. The number is the sum of all entries present in the local MEP table and the local … |
| 1.3.6.1.4.1.664.5.75.2.1.2.5.1.2 | ScalaradGenY1731MegMepListCurrentNumber | read-only | current | Current number of MEPs in the MEG's list of MEPs. |
| 1.3.6.1.4.1.664.5.75.2.1.2.5.1.3 | ScalaradGenY1731MegMepListTableLastCreateError | read-only | current | The reason for the last error that occured while attempting to create an entry in the MEG MEP List (adGenY1731MegMepListTable). |
| 1.3.6.1.4.1.664.5.75.2.1.2.5.2 | TableadGenY1731MegMepListTable | not-accessible | current | The list of all MEPs in the MEG. For a device to create a local MEP it will need to create an entry in the adGenY1731LocalMepConfigTable. Once a local MEP is c… |
| 1.3.6.1.4.1.664.5.75.2.1.2.5.2.1 | RowadGenY1731MegMepListEntry | not-accessible | current | An entry in the Y.1731 MEG MEP list table. |
| 1.3.6.1.4.1.664.5.75.2.1.2.5.2.1.1 | ColumnadGenY1731MegMepListIdentifier | not-accessible | current | Integer that is unique among all the MEPs in the same MEG. Other definition is: a small integer, unique over a given Maintenance Entity Group, identifying a sp… |
| 1.3.6.1.4.1.664.5.75.2.1.2.5.2.1.2 | ColumnadGenY1731MegMepListRowStatus | read-create | current | This OID is used to create/delete the MEG MEP list entry. The only supported settings are createAndGo, createAndWait, and destroy. |
| 1.3.6.1.4.1.664.5.75.2.1.3 | NodeadGenY1731LocalMep | |||
| 1.3.6.1.4.1.664.5.75.2.1.3.1 | NodeadGenY1731LocalMepConfig | |||
| 1.3.6.1.4.1.664.5.75.2.1.3.1.1 | NodeadGenY1731LocalMepConfigScalars | |||
| 1.3.6.1.4.1.664.5.75.2.1.3.1.1.1 | ScalaradGenY1731LocalMepMaxNumber | read-only | current | Maximum number of allowed local Maintenenance End Points. |
| 1.3.6.1.4.1.664.5.75.2.1.3.1.1.2 | ScalaradGenY1731LocalMepCurrentNumber | read-only | current | Current number of local MEPs. |
| 1.3.6.1.4.1.664.5.75.2.1.3.1.1.3 | ScalaradGenY1731LocalMepConfigTableLastCreateError | read-only | current | The reason for the last error that occured while attempting to create an entry in the local MEP Table (adGenY1731LocalMepConfigTable). |
| 1.3.6.1.4.1.664.5.75.2.1.3.1.2 | TableadGenY1731LocalMepConfigTable | not-accessible | current | The Y.1731 local MEP table. A local MEP is one that resides on an interface of the system. |
| 1.3.6.1.4.1.664.5.75.2.1.3.1.2.1 | RowadGenY1731LocalMepConfigEntry | not-accessible | current | An entry in the Y.1731 local MEP table. |
| 1.3.6.1.4.1.664.5.75.2.1.3.1.2.1.1 | ColumnadGenY1731LocalMepIdentifier | not-accessible | current | Integer that is unique among all the MEPs in the same MEG. Other definition is: a small integer, unique over a given Maintenance Entity Group, identifying a sp… |
| 1.3.6.1.4.1.664.5.75.2.1.3.1.2.1.2 | ColumnadGenY1731LocalMepRowStatus | read-create | current | This OID is used to create/delete the MEP. The only supported settings are createAndGo, createAndWait, and destroy. |
| 1.3.6.1.4.1.664.5.75.2.1.3.1.2.1.3 | ColumnadGenY1731LocalMepStatus | read-only | current | Operational status of the MEP. The minimum attributes that need to be set before a MEP can transition to running are: ifIndex, direction, and admin state. |
| 1.3.6.1.4.1.664.5.75.2.1.3.1.2.1.4 | ColumnadGenY1731LocalMepStatusString | read-only | current | Operational status string of the MEP. If the MEP is expected to be active but is not able to be due to a provisioning issue or conflict, this string will expla… |
| 1.3.6.1.4.1.664.5.75.2.1.3.1.2.1.5 | ColumnadGenY1731LocalMepIfIndex | read-create | current | This object is the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, to which the MEP is attached. … |
| 1.3.6.1.4.1.664.5.75.2.1.3.1.2.1.6 | ColumnadGenY1731LocalMepDirection | read-create | current | The direction in which the MEP faces on the Bridge port. |
| 1.3.6.1.4.1.664.5.75.2.1.3.1.2.1.7 | ColumnadGenY1731LocalMepAdminState | read-create | current | The administrative state of the MEP. Enable indicates that the MEP is to function normally, and disable that it is to cease functioning. |
| 1.3.6.1.4.1.664.5.75.2.1.3.1.2.1.8 | ColumnadGenY1731LocalMepVlanPriority | read-create | current | The priority value for messages transmitted by the MEP. Default value is the highest priority value for the service which is assumed to be 7. The management en… |
| 1.3.6.1.4.1.664.5.75.2.1.3.1.2.1.9 | ColumnadGenY1731LocalMepCcmEnabled | read-create | current | If set to true, the MEP will generate CCM messages. |
| 1.3.6.1.4.1.664.5.75.2.1.3.2 | NodeadGenY1731LocalMepRmepDb | |||
| 1.3.6.1.4.1.664.5.75.2.1.3.2.1 | NodeadGenY1731LocalMepRmepDbScalars | |||
| 1.3.6.1.4.1.664.5.75.2.1.3.2.1.1 | ScalaradGenY1731LocalMepRmepDbMaxNumber | read-only | current | A systemwide value representing the maximum number of remote Maintenance End Points that can be created across all Local MEPs on the device. |
| 1.3.6.1.4.1.664.5.75.2.1.3.2.1.2 | ScalaradGenY1731LocalMepRmepDbCurrentNumber | read-only | current | Current number of remote MEPs. |
| 1.3.6.1.4.1.664.5.75.2.1.3.2.2 | TableadGenY1731LocalMepRmepDbTable | not-accessible | current | The RMEP database table for a given local MEP. Maintains information and status for each RMEP of a local MEP. |
| 1.3.6.1.4.1.664.5.75.2.1.3.2.2.1 | RowadGenY1731LocalMepRmepDbEntry | not-accessible | current | An entry in the a local MEP's RMEP database table. An RMEP associated with a specific local MEP |
| 1.3.6.1.4.1.664.5.75.2.1.3.2.2.1.1 | ColumnadGenY1731RemoteMepIdentifier | not-accessible | current | Integer that is unique among all the MEPs in the same MEG. Other definition is: a small integer, unique over a given Maintenance Entity Group, identifying a sp… |
| 1.3.6.1.4.1.664.5.75.2.1.3.2.2.1.2 | ColumnadGenY1731RemoteMepStatus | read-only | current | Status of the RMEP. Status of idle indicates the local MEP associated with this RMEP entry is not in the active state. Status of okay indicates the local MEP i… |
| 1.3.6.1.4.1.664.5.75.2.1.3.2.2.1.3 | ColumnadGenY1731RemoteMepFailedOkTime | read-only | current | The time (SysUpTime) at which the RMEP state machine last entered either the idle, okay, or failed state. The value is the time since the device started up and… |
| 1.3.6.1.4.1.664.5.75.2.1.3.2.2.1.4 | ColumnadGenY1731RemoteMepMacAddress | read-only | current | The MAC address of the remote MEP. |
| 1.3.6.1.4.1.664.5.75.2.1.3.2.2.1.5 | ColumnadGenY1731RemoteMepLastCcmSequenceNumber | read-only | current | Sequence number in last CCM received from the remote MEP. |
| 1.3.6.1.4.1.664.5.75.2.1.3.2.2.1.6 | ColumnadGenY1731RemoteMepRdi | read-only | current | State of the RDI bit in the last received CCM (true for RDI=1), or false if none has been received. |
| 1.3.6.1.4.1.664.5.75.2.1.3.2.2.1.7 | ColumnadGenY1731RemoteMepPortStatus | read-only | current | An enumerated value of the Port Status TLV received in the last CCM from the remote MEP. The default value psNoPortStatusTlv is returned if no CCM has been rec… |
| 1.3.6.1.4.1.664.5.75.2.1.3.2.2.1.8 | ColumnadGenY1731RemoteMepInterfaceStatus | read-only | current | An enumerated value of the Interface status TLV received in the last CCM from the remote MEP. The the default value isNoInterfaceStatus TLV is returned if eith… |
| 1.3.6.1.4.1.664.5.75.2.1.3.2.2.1.9 | ColumnadGenY1731RemoteMepChassisIdSubtype | read-only | current | Specifies the format of the Chassis ID received in the last CCM. If the Chassis ID field was not included in the Sender ID TLV received, the value nonePresent(… |
| 1.3.6.1.4.1.664.5.75.2.1.3.2.2.1.10 | ColumnadGenY1731RemoteMepChassisId | read-only | current | Chassis ID received in the last CCM format of which is determined by the value of adGenY1731RemoteMepChassisIdSubtype. |
| 1.3.6.1.4.1.664.5.75.2.1.3.2.2.1.11 | ColumnadGenY1731RemoteMepManAddressDomain | read-only | current | The TDomain that identifies the type and format of the related adGenY1731RemoteMepManAddress object, used to access the SNMP agent of the system transmitting t… |
| 1.3.6.1.4.1.664.5.75.2.1.3.2.2.1.12 | ColumnadGenY1731RemoteMepManAddress | read-only | current | The TAddress that can be used to access the SNMP agent of the system transmitting the CCM. This is received in the CCM Sender ID TLV from that system. If the r… |
| 1.3.6.1.4.1.664.5.75.2.1.3.3 | NodeadGenY1731LocalMepLbm | |||
| 1.3.6.1.4.1.664.5.75.2.1.3.3.1 | TableadGenY1731LocalMepLbmTransmitTable | not-accessible | current | The Y.1731 Local MEP Loopback Transmit table. A Local MEP is one that resides on an interface of the system. This table will enable the user to configure a Loc… |
| 1.3.6.1.4.1.664.5.75.2.1.3.3.1.1 | RowadGenY1731LocalMepLbmTransmitEntry | not-accessible | current | An entry in the Y.1731 Local MEP Loopback Transmit table. |
| 1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.1 | ColumnadGenY1731LocalMepLbmStatus | read-only | current | A Boolean flag where true means the MEP is actively sending LBM messages and false means that no LBMs are being transmitted. |
| 1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.2 | ColumnadGenY1731LocalMepLbmConfigStatus | read-write | current | True means the MEP is ready for configuring LBM and a false means the MEP is under LBM configuration. This flag is used to prevent simultaneous configuration b… |
| 1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.3 | ColumnadGenY1731LocalMepLbmDestMacAddress | read-write | current | The Target MAC Address Field to be transmitted. This is a unicast destination MAC address. This address will be used if the value of the column adGenY1731Local… |
| 1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.4 | ColumnadGenY1731LocalMepLbmDestMepId | read-write | current | The MEG End Point Identifier of another MEP in the same MEG to which the LBM is to be sent. This address will be used if the value of the column adGenY1731Loca… |
| 1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.5 | ColumnadGenY1731LocalMepLbmDestIsMepId | read-write | current | True indicates that MEPID of the target MEP is used for Loopback transmission. False indicates that unicast destination MAC address of the target MEP is used f… |
| 1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.6 | ColumnadGenY1731LocalMepLbmMessageCount | read-write | current | The number of Loopback messages to be transmitted. |
| 1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.7 | ColumnadGenY1731LocalMepLbmActive | read-write | current | Start or stop LBM transmission. By writing true, start LBM transmisson. By writing false, stop LBM transmission |
| 1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.8 | ColumnadGenY1731LocalMepLbmDataTlv | read-write | current | An arbitrary amount of data to be included in the Data TLV, if the Data TLV is selected to be sent. |
| 1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.9 | ColumnadGenY1731LocalMepLbmVlanPriority | read-write | current | The 3 bit priority value to be used in the VLAN tag, if present, in the transmitted frame. The default value is CCM priority. |
| 1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.10 | ColumnadGenY1731LocalMepLbmVlanDropEnable | read-write | current | Drop Enable bit value to be used in the VLAN tag, if present in the transmitted frame. For more information about VLAN Drop Enable, please check IEEE 802.1ad. |
| 1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.11 | ColumnadGenY1731LocalMepLbmErrorStatus | read-only | current | MEP Loopback error status. |
| 1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.12 | ColumnadGenY1731LocalMepLbmTimeout | read-write | current | MEP Loopback Timeout in milliseconds. |
| 1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.13 | ColumnadGenY1731LocalMepLbmInterframeDelay | read-write | current | MEP Loopback Interframe Delay in milliseconds. |
| 1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.14 | ColumnadGenY1731LocalMepLbmNextTransId | read-only | current | Next transaction identifier to be sent in a Loopback message. This transaction identifier can be zero because it wraps around. |
| 1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.15 | ColumnadGenY1731LocalMepLbmSize | read-write | current | Size of the LBM in bytes. The size encompasses the entire Ethernet frame from the header through the FCS. The supported values are: 0 to indicate Data TLV shou… |
| 1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.16 | ColumnadGenY1731LocalMepValidateData | read-write | current | A Boolean flag where true means the data sent in LBM message has to be validated with the LBR. False indicates no validation is required. |
| 1.3.6.1.4.1.664.5.75.2.1.3.3.2 | TableadGenY1731LocalMepLbmResultTable | not-accessible | current | The Y.1731 Local MEP Loopback Result table. A Local MEP is one that resides on an interface of the system. This table can be used to query the results and coun… |
| 1.3.6.1.4.1.664.5.75.2.1.3.3.2.1 | RowadGenY1731LocalMepLbmResultEntry | not-accessible | current | An entry in the Y.1731 Local MEP Loopback Result table. |
| 1.3.6.1.4.1.664.5.75.2.1.3.3.2.1.1 | ColumnadGenY1731LocalMepLbrResultOk | read-only | current | Indicates the result of the operation: - true The Loopback Message(s) will be (or has been) sent. - false The Loopback Message(s) will not be sent. |
| 1.3.6.1.4.1.664.5.75.2.1.3.3.2.1.2 | ColumnadGenY1731LocalMepLbrResponseTimeMin | read-only | current | Minimum LBR round-trip time (in milliseconds). |
| 1.3.6.1.4.1.664.5.75.2.1.3.3.2.1.3 | ColumnadGenY1731LocalMepLbrResponseTimeMax | read-only | current | Maximum LBR round-trip time (in milliseconds). |
| 1.3.6.1.4.1.664.5.75.2.1.3.3.2.1.4 | ColumnadGenY1731LocalMepLbrResponseTimeAvg | read-only | current | Average LBR round-trip time (in milliseconds). |
| 1.3.6.1.4.1.664.5.75.2.1.3.3.2.1.5 | ColumnadGenY1731LocalMepLbrIn | read-only | current | Total number of valid, Loopback Replies received. |
| 1.3.6.1.4.1.664.5.75.2.1.3.3.2.1.6 | ColumnadGenY1731LocalMepLbrInOutOfOrder | read-only | current | The total number of valid, out-of-order Loopback Replies received. |
| 1.3.6.1.4.1.664.5.75.2.1.3.3.2.1.7 | ColumnadGenY1731LocalMepLbrBadMsdu | read-only | current | The total number of LBRs received whose mac_service_data_unit did not match (except for the OpCode) that of the corresponding LBM. |
| 1.3.6.1.4.1.664.5.75.2.1.3.3.2.1.8 | ColumnadGenY1731LocalMepLbmOut | read-only | current | The total number of LBMs transmitted. |
| 1.3.6.1.4.1.664.5.75.2.1.3.3.3 | TableadGenY1731LocalMepLbmResponderTable | not-accessible | current | The Y.1731 Local MEP Loopback Responder table. A Local MEP is one that resides on an interface of the system. This table can be used to query the counters rela… |
| 1.3.6.1.4.1.664.5.75.2.1.3.3.3.1 | RowadGenY1731LocalMepLbmResponderEntry | not-accessible | current | An entry in the Y.1731 Local MEP Loopback Responder table. |
| 1.3.6.1.4.1.664.5.75.2.1.3.3.3.1.1 | ColumnadgenY1731LocalMepLbrOut | read-only | current | Total number of Loopback Replies transmitted. |
| 1.3.6.1.4.1.664.5.75.2.1.3.3.3.1.2 | ColumnadGenY1731LocalMepLbmIn | read-only | current | Total number of valid, Loopback Messages received. |
| 1.3.6.1.4.1.664.5.75.2.1.3.4 | NodeadGenY1731LocalMepDmm | |||
| 1.3.6.1.4.1.664.5.75.2.1.3.4.1 | NodeadGenY1731DmmScalars | |||
| 1.3.6.1.4.1.664.5.75.2.1.3.4.1.1 | ScalaradGenY1731DmmSessionMaxNumber | read-only | current | A systemwide value representing the maximum number of DMM sessions that can be created across all local MEPs on the device. |
| 1.3.6.1.4.1.664.5.75.2.1.3.4.1.2 | ScalaradGenY1731DmmSessionCurrentNumber | read-only | current | Current number of DMM sessions created. |
| 1.3.6.1.4.1.664.5.75.2.1.3.4.1.3 | ScalaradGenY1731DmmSessionLastCreateError | read-only | current | The reason for the last error that occurred while attempting to create an DMM Session Transmit entry (adGenY1731DmmSessionTransmitEntry). |
| 1.3.6.1.4.1.664.5.75.2.1.3.4.2 | TableadGenY1731DmmSessionTransmitTable | not-accessible | current | The two-way frame-delay (DMM) session table for a given local MEP. A local MEP's DMM sessions can be created, edited, and deleted using this table. A local MEP… |
| 1.3.6.1.4.1.664.5.75.2.1.3.4.2.1 | RowadGenY1731DmmSessionTransmitEntry | not-accessible | current | A two-way frame-delay (DMM) performance monitoring session of a local MEP. A DMM PM session is unique based on target identifier and VLAN priority. The target … |
| 1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.1 | ColumnadGenY1731DmmSessionTargetRmepIdOrMacAddress | not-accessible | current | Indicates whether the target specified is a MEPID or a unicast MAC Address. If the target specified is a MEPID, the local MEP will not be able to initiate the … |
| 1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.2 | ColumnadGenY1731DmmSessionTarget | not-accessible | current | Octet string defining the target for the DMM session. If adGenY1731DmmSessionTargetRmepIdOrMacAddress indicates the target is a MEPID then the octet string sho… |
| 1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.3 | ColumnadGenY1731DmmSessionVlanPriority | not-accessible | current | VLAN Priority that will be used in all DMM frames sent by this DMM transmit session. |
| 1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.4 | ColumnadGenY1731DmmSessionTargetRemoteMepIdentifier | read-only | current | Target MEPID for this DMM session |
| 1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.5 | ColumnadGenY1731DmmSessionTargetMacAddress | read-only | current | Target MAC address for this DMM session |
| 1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.6 | ColumnadGenY1731DmmSessionRowStatus | read-create | current | This OID is used to create/delete a transmit DMM session of a Local MEP. The only supported settings are createAndGo, createAndWait, and destroy. |
| 1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.7 | ColumnadGenY1731DmmSessionAdminState | read-create | current | The administrative state of the DMM transmit session. True indicates that the DMM session is to function normally and actively transmit DMMs towards the specif… |
| 1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.8 | ColumnadGenY1731DmmSessionStatus | read-only | current | Operational status of the DMM transmit session. The minimum attributes that need to be set before a MEP can transmit DMMs towards the target are: Target MEPID … |
| 1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.9 | ColumnadGenY1731DmmSessionStatusString | read-only | current | Operational status string of the DMM transmit session. If the session is expected to be active but is not able to be due to a provisioning issue or conflict, t… |
| 1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.10 | ColumnadGenY1731DmmSessionInterframeDelay | read-create | current | Amount of time in milliseconds between DMM transmissions. The supported range is 100 - 10,000 ms and the default value is 1000 ms. |
| 1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.11 | ColumnadGenY1731DmmSessionMeasurementInterval | read-create | current | Interval in seconds over which statistics are generated. The supported range is 60 - 900 seconds and the default value is 60. The statistics calculated for a m… |
| 1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.12 | ColumnadGenY1731DmmSessionSize | read-create | current | Size of the DMM in bytes. The size encompasses the entire Ethernet frame from the header through the FCS. The supported values are: 0 to indicate Data TLV shou… |
| 1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.13 | ColumnadGenY1731DmmSessionData | read-create | current | Data pattern to be used when padding is required to meet the size setting. The default value is 0x00 0x00. |
| 1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.14 | ColumnadGenY1731DmmSessionBulkDataExportFileTypes | read-create | current | Determines which, if any, files are generated by this DMM transmit session. The files are used to store two-way frame-delay statistics. The average setting wil… |
| 1.3.6.1.4.1.664.5.75.2.1.3.5 | NodeadGenY1731LocalMepLmm | |||
| 1.3.6.1.4.1.664.5.75.2.1.3.5.1 | NodeadGenY1731LmmScalars | |||
| 1.3.6.1.4.1.664.5.75.2.1.3.5.1.1 | ScalaradGenY1731LmmSessionMaxNumber | read-only | current | A systemwide value representing the maximum number of LMM sessions that can be created across all local MEPs on the device. |
| 1.3.6.1.4.1.664.5.75.2.1.3.5.1.2 | ScalaradGenY1731LmmSessionCurrentNumber | read-only | current | Current number of LMM sessions created. |
| 1.3.6.1.4.1.664.5.75.2.1.3.5.1.3 | ScalaradGenY1731LmmSessionLastCreateError | read-only | current | The reason for the last error that occurred while attempting to create an LMM Session Transmit entry (adGenY1731LmmSessionTransmitEntry). |
| 1.3.6.1.4.1.664.5.75.2.1.3.5.2 | TableadGenY1731LmmSessionTransmitTable | not-accessible | current | The single-ended frame-loss (LMM) session table for a given local MEP. A local MEP's LMM sessions can be created, edited, and deleted using this table. A local… |
| 1.3.6.1.4.1.664.5.75.2.1.3.5.2.1 | RowadGenY1731LmmSessionTransmitEntry | not-accessible | current | A single-ended frame-loss (LMM) performance monitoring session of a local MEP. A LMM PM session is unique based on target identifier and VLAN priority. The tar… |
| 1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.1 | ColumnadGenY1731LmmSessionTargetRmepIdOrMacAddress | not-accessible | current | Indicates whether the target specified is a MEPID or a unicast MAC Address. If the target specified is a MEPID the local MEP will not be able to initiate the L… |
| 1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.2 | ColumnadGenY1731LmmSessionTarget | not-accessible | current | Octet string defining the target for the LMM session. If adGenY1731LmmSessionTargetRmepIdOrMacAddress indicates the target is a MEPID then the octet string sho… |
| 1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.3 | ColumnadGenY1731LmmSessionVlanPriority | not-accessible | current | VLAN Priority that will be used in all LMM frames sent by this LMM transmit session. |
| 1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.4 | ColumnadGenY1731LmmSessionTargetRemoteMepIdentifier | read-only | current | Target MEPID for this LMM session |
| 1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.5 | ColumnadGenY1731LmmSessionTargetMacAddress | read-only | current | Target MAC address for this LMM session |
| 1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.6 | ColumnadGenY1731LmmSessionRowStatus | read-create | current | This OID is used to create/delete a transmit LMM session of a Local MEP. The only supported settings are createAndGo, createAndWait, and destroy. |
| 1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.7 | ColumnadGenY1731LmmSessionAdminState | read-create | current | The administrative state of the LMM transmit session. True indicates that the LMM session is to function normally and actively transmit LMMs towards the specif… |
| 1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.8 | ColumnadGenY1731LmmSessionStatus | read-only | current | Operational status of the LMM transmit session. The minimum attributes that need to be set before a MEP can transmit LMMs towards the target are: Target MEPID … |
| 1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.9 | ColumnadGenY1731LmmSessionStatusString | read-only | current | Operational status string of the LMM transmit session. If the session is expected to be active but is not able to be due to a provisioning issue or conflict, t… |
| 1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.10 | ColumnadGenY1731LmmSessionInterframeDelay | read-create | current | Amount of time in milliseconds between LMM transmissions. The supported range is 100 - 10,000 ms and the default value is 1000 ms. |
| 1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.11 | ColumnadGenY1731LmmSessionMeasurementInterval | read-create | current | Interval in seconds over which statistics are generated. The supported range is 60 - 900 seconds and the default value is 60. The statistics calculated for a m… |
| 1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.12 | ColumnadGenY1731LmmSessionSize | read-create | current | Size of the LMM in bytes. The size encompasses the entire Ethernet frame from the header through the FCS. The supported values are: 0 to indicate Data TLV shou… |
| 1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.13 | ColumnadGenY1731LmmSessionData | read-create | current | Data pattern to be used when padding is required to meet the size setting. The default value is 0x00 0x00. |
| 1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.14 | ColumnadGenY1731LmmSessionBulkDataExportFileTypes | read-create | current | Determines which, if any, files are generated by this LMM transmit session. The files are used to store single-ended frame-loss statistics. The average setting… |
| 1.3.6.1.4.1.664.5.75.2.1.3.6 | NodeadGenY1731LocalMepLtm | |||
| 1.3.6.1.4.1.664.5.75.2.1.3.6.1 | TableadGenY1731LocalMepLtmTable | not-accessible | current | The Y.1731 Local MEP Linktrace table. A Local MEP is one that resides on an interface of the system. This table will enable the user to configure in preparatio… |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.1.1 | RowadGenY1731LocalMepLtmEntry | not-accessible | current | An entry in the Y.1731 Local MEP Linktrace table. |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.1.1.1 | ColumnadGenY1731LocalMepLtmNextTransactionId | read-only | current | Next transaction identifier to be sent in a Linktrace message. This transaction identifier value can be zero because it wraps around. |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.1.1.2 | ColumnadGenY1731LocalMepUnexpLtrIn | read-only | current | The total number of unexpected LTRs received. |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.1.1.3 | ColumnadGenY1731LocalMepTransmitLtmStatus | read-only | current | A Boolean flag set to true by the bridge port to indicate that another LTM may be transmitted. Reset to false by the MEP Linktrace Initiator State Machine. |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.1.1.4 | ColumnadGenY1731LocalMepTransmitLtmFlags | read-write | current | The flags field for LTMs transmitted by the MEP. |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.1.1.5 | ColumnadGenY1731LocalMepTransmitLtmTargetMacAddress | read-write | current | The Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column adGenY1731LocalMepTrans… |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.1.1.6 | ColumnadGenY1731LocalMepTransmitLtmTargetMepId | read-write | current | An indication of the Target MAC Address Field to be transmitted. The MAC address to be used will be retrieved from the Local MEP's Remote MEP database by using… |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.1.1.7 | ColumnadGenY1731LocalMepTransmitLtmTargetIsMepId | read-write | current | True indicates that MEPID of the target MEP is used for Linktrace transmission. False indicates that unicast destination MAC address of the target MEP is used … |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.1.1.8 | ColumnadGenY1731LocalMepTransmitLtmTtl | read-write | current | The LTM TTL field. Default value, if not specified, is 64. The TTL field indicates the number of hops remaining to the LTM. Decremented by 1 by each Linktrace … |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.1.1.9 | ColumnadGenY1731LocalMepTransmitLtmResult | read-only | current | Indicates the result of the operation: true The Linktrace Message will be (or has been) sent. false The Linktrace Message will not be sent. |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.1.1.10 | ColumnadGenY1731LocalMepTransmitLtmTransactionId | read-only | current | The LTM Transaction Identifier (adGenY1731LocalMepLtmNextTransactionId) of the LTM sent. The value returned is undefined if adGenY1731LocalMepTransmitLtmResult… |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.1.1.11 | ColumnadGenY1731LocalMepTransmitLtmEgressIdentifier | read-only | current | Identifies the MEP Linktrace Initiator that is originating, or the Linktrace Responder that is forwarding, this LTM. The low-order six octets contain a 48-bit … |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.1.1.12 | ColumnadGenY1731LocalMepTransmitLtmStatusString | read-only | current | Linktrace error status contains a string indicating the reason they the Lintkrace transmission attempt failed. |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.1.1.13 | ColumnadGenY1731LocalMepTransmitLtmConfigStatus | read-write | current | True means the MEP is ready for configuring LTM and a false means the MEP is under LTM configuration. This flag is used to prevent simultaneous configuration b… |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.1.1.14 | ColumnadGenY1731LocalMepLtmActive | read-write | current | Start or stop LTM transmission. By writing true, start LTM transmisson. By writing false, stop LTM transmission |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.1.1.15 | ColumnadGenY1731LocalMepLtmTotalOut | read-only | current | The total number of LTMs transmitted by the Local MEP. |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.1.1.16 | ColumnadGenY1731LocalMepLtrTotalIn | read-only | current | The total number of LTRs received by the Local MEP. |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.1.1.17 | ColumnadGenY1731LocalMepLtrTotalInvalidIn | read-only | current | The total number of invalid LTRs received by the Local MEP. |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.1.1.18 | ColumnadGenY1731LocalMepLtrTotalValidIn | read-only | current | The total number of valid LTRs received by the Local MEP. |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.2 | TableadGenY1731LocalMepLtSessionTable | not-accessible | current | The Y.1731 Local MEP Linktrace session table. This table contains a list of Linktrace sessions and the counters associated with each session. |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.2.1 | RowadGenY1731LocalMepLtSessionEntry | not-accessible | current | An entry in the Y.1731 Local MEP Linktrace session table. |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.2.1.1 | ColumnadGenY1731LocalMepLtmTransactionId | not-accessible | current | Transaction identifier value in LTM transmitted for this Linktrace session. |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.2.1.2 | ColumnadGenY1731LocalMepLtmOut | read-only | current | The number of LTM transmitted for this Linktrace session. |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.2.1.3 | ColumnadGenY1731LocalMepLtrIn | read-only | current | The number of LTRs received for this Linktrace session. |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.2.1.4 | ColumnadGenY1731LocalMepLtrInvalidIn | read-only | current | The number of LTRs received and discarded for this Linktrace session due to invalid formatting. |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.2.1.5 | ColumnadGenY1731LocalMepLtrValidIn | read-only | current | The number of LTRs received and processed as valid for this Linktrace session. |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.2.1.6 | ColumnadGenY1731LocalMepLtTimeRemaining | read-only | current | Each Linktrace sequence will run for a fixed period of time. This counter indicates how much time is remaining. When the counter is 0, there are results in the… |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.3 | TableadGenY1731LocalMepLtrTable | not-accessible | current | The Y.1731 Local MEP Linktrace reply table. This table contains a list of Linktrace replies received by a specific MEP in response to a Linktrace message. |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.3.1 | RowadGenY1731LocalMepLtrEntry | not-accessible | current | An entry in the Y.1731 Local MEP Linktrace reply table. |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.3.1.1 | ColumnadGenY1731LocalMepLtrTransactionId | not-accessible | current | Transaction identifier returned by a previous transmit Linktrace message command, indicating which LTM's response is going to be returned. |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.3.1.2 | ColumnadGenY1731LocalMepLtrReceiveOrder | not-accessible | current | An index to distinguish among multiple LTRs with the same LTR Transaction Identifier field value. adGenY1731LocalMepLtrReceiveOrder are assigned sequentially f… |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.3.1.3 | ColumnadGenY1731LocalMepLtrTtl | read-only | current | TTL field value for a returned LTR. |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.3.1.4 | ColumnadGenY1731LocalMepLtrForwarded | read-only | current | Indicates if a LTM was forwarded by the responding MP, as returned in the 'FwdYes' flag of the flags field. |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.3.1.5 | ColumnadGenY1731LocalMepLtrTerminalMep | read-only | current | A boolean value stating whether the forwarded LTM reached a MEP within the MEG, as returned in the Terminal MEP flag of the Flags field. |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.3.1.6 | ColumnadGenY1731LocalMepLtrLastEgressIdentifier | read-only | current | An octet field holding the Last Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. The Last Egress Identifier identifies the MEP Linktrace… |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.3.1.7 | ColumnadGenY1731LocalMepLtrNextEgressIdentifier | read-only | current | An octet field holding the Next Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. The Next Egress Identifier Identifies the Linktrace Res… |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.3.1.8 | ColumnadGenY1731LocalMepLtrRelay | read-only | current | Value returned in the Relay Action field. |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.3.1.9 | ColumnadGenY1731LocalMepLtrChassisIdSubtype | read-only | current | This object specifies the format of the Chassis ID returned in the Sender ID TLV of the LTR, if any. |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.3.1.10 | ColumnadGenY1731LocalMepLtrChassisId | read-only | current | The Chassis ID returned in the Sender ID TLV of the LTR, if any. The format of this object is determined by the value of the adGenY1731LocalMepLtrChassisIdSubt… |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.3.1.11 | ColumnadGenY1731LocalMepLtrManAddressDomain | read-only | current | The TDomain that identifies the type and format of the related adGenY1731LocalMepLtrManAddress object, used to access the SNMP agent of the system transmitting… |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.3.1.12 | ColumnadGenY1731LocalMepLtrManAddress | read-only | current | The TAddress that can be used to access the SNMP agent of the system transmitting the CCM, received in the CCM Sender ID TLV from that system. If the related o… |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.3.1.13 | ColumnadGenY1731LocalMepLtrIngress | read-only | current | The value returned in the Ingress Action Field of the LTM. The value ingNoTlv(0) indicates that no Reply Ingress TLV was returned in the LTM. |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.3.1.14 | ColumnadGenY1731LocalMepLtrIngressMac | read-only | current | MAC address returned in the ingress MAC address field. If the adGenY1731LocalMepLtrIngress object contains the value ingNoTlv(0), then the contents of this obj… |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.3.1.15 | ColumnadGenY1731LocalMepLtrIngressPortIdSubtype | read-only | current | Format of the Ingress Port ID. If the adGenY1731LocalMepLtrIngress object contains the value ingNoTlv(0), then the contents of this object are meaningless. |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.3.1.16 | ColumnadGenY1731LocalMepLtrIngressPortId | read-only | current | Ingress Port ID. The format of this object is determined by the value of the adGenY1731LocalMepLtrIngressPortIdSubtype object. If the adGenY1731LocalMepLtrIngr… |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.3.1.17 | ColumnadGenY1731LocalMepLtrEgress | read-only | current | The value returned in the Egress Action Field of the LTR. The value egrNoTlv(0) indicates that no Reply Egress TLV was returned in the LTR. |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.3.1.18 | ColumnadGenY1731LocalMepLtrEgressMac | read-only | current | MAC address returned in the egress MAC address field. If the adGenY1731LocalMepLtrIngress object contains the value egrNoTlv(0), then the contents of this obje… |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.3.1.19 | ColumnadGenY1731LocalMepLtrEgressPortIdSubtype | read-only | current | Format of the egress Port ID. If the adGenY1731LocalMepLtrEgress object contains the value egrNoTlv(0), then the contents of this object are meaningless. |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.3.1.20 | ColumnadGenY1731LocalMepLtrEgressPortId | read-only | current | Egress Port ID. The format of this object is determined by the value of the adGenY1731LocalMepLtrEgressPortIdSubtype object. If the adGenY1731LocalMepLtrEgress… |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.3.1.21 | ColumnadGenY1731LocalMepLtrOrganizationSpecificTlv | read-only | current | All Organization specific TLVs returned in the LTR, if any. Includes all octets including and following the TLV Length field of each TLV, concatenated together. |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.4 | TableadGenY1731LocalMepLtmResponderTable | not-accessible | current | The Y.1731 Local MEP Linktrace Responder table. This table contains the counters associated with each Local MEP's Linktrace Responder. |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.4.1 | RowadGenY1731LocalMepLtmResponderEntry | not-accessible | current | An entry in the Y.1731 Local MEP Linktrace Responder table. |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.4.1.1 | ColumnadGenY1731LocalMepLtmIn | read-only | current | The total number of valid LTMs received. |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.4.1.2 | ColumnadGenY1731LocalMepLtmDiscardedInvalidFormat | read-only | current | The total number LTMs discarded due to invalid format. |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.4.1.3 | ColumnadGenY1731LocalMepLtmDiscardedTtl | read-only | current | The total number of LTMs discarded due to invalid Ttl. |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.4.1.4 | ColumnadGenY1731LocalMepLtmDiscardedTargetMac | read-only | current | The total number of LTMs discarded due to invalid target MAC address. |
| 1.3.6.1.4.1.664.5.75.2.1.3.6.4.1.5 | ColumnadGenY1731LocalMepLtrOut | read-only | current | The total number of LTRs transmitted. |
| 1.3.6.1.4.1.664.5.75.2.1.3.7 | NodeadGenY1731LocalMepOneDm | |||
| 1.3.6.1.4.1.664.5.75.2.1.3.7.1 | NodeadGenY1731OneDmScalars | |||
| 1.3.6.1.4.1.664.5.75.2.1.3.7.1.1 | ScalaradGenY1731OneDmSessionMaxNumber | read-only | current | A systemwide value representing the maximum number of one-way frame delay (ETH-1DM) sessions that can be created across all local MEPs on the device. |
| 1.3.6.1.4.1.664.5.75.2.1.3.7.1.2 | ScalaradGenY1731OneDmSessionCurrentNumber | read-only | current | Current number of 1DM sessions created. |
| 1.3.6.1.4.1.664.5.75.2.1.3.7.1.3 | ScalaradGenY1731OneDmSessionLastCreateError | read-only | current | The reason for the last error that occurred while attempting to create an 1DM Session Transmit entry (adGenY1731OneDmSessionTransmitEntry). |
| 1.3.6.1.4.1.664.5.75.2.1.3.7.2 | TableadGenY1731OneDmSessionTransmitTable | not-accessible | current | The one-way frame-delay (ETH-1DM) session table for a given local MEP. A local MEP's 1DM sessions can be created, edited, and deleted using this table. A local… |
| 1.3.6.1.4.1.664.5.75.2.1.3.7.2.1 | RowadGenY1731OneDmSessionTransmitEntry | not-accessible | current | A one-way frame-delay (1DM) performance monitoring session of a local MEP. A 1DM PM session is unique based on target identifier and VLAN priority. The target … |
| 1.3.6.1.4.1.664.5.75.2.1.3.7.2.1.1 | ColumnadGenY1731OneDmSessionTargetRmepIdOrMacAddress | not-accessible | current | Indicates whether the target specified is a MEPID or a unicast MAC Address. If the target specified is a MEPID, the local MEP will not be able to initiate the … |
| 1.3.6.1.4.1.664.5.75.2.1.3.7.2.1.2 | ColumnadGenY1731OneDmSessionTarget | not-accessible | current | Octet string defining the target for the 1DM session. If adGenY1731OneDmSessionTargetRmepIdOrMacAddress indicates the target is a MEPID then the octet string s… |
| 1.3.6.1.4.1.664.5.75.2.1.3.7.2.1.3 | ColumnadGenY1731OneDmSessionVlanPriority | not-accessible | current | VLAN Priority that will be used in all 1DM frames sent by this 1DM transmit session. |
| 1.3.6.1.4.1.664.5.75.2.1.3.7.2.1.4 | ColumnadGenY1731OneDmSessionTargetRemoteMepIdentifier | read-only | current | Target MEPID for this 1DM session |
| 1.3.6.1.4.1.664.5.75.2.1.3.7.2.1.5 | ColumnadGenY1731OneDmSessionTargetMacAddress | read-only | current | Target MAC address for this 1DM session |
| 1.3.6.1.4.1.664.5.75.2.1.3.7.2.1.6 | ColumnadGenY1731OneDmSessionRowStatus | read-create | current | This OID is used to create/delete a transmit 1DM session of a Local MEP. The only supported settings are createAndGo, createAndWait, and destroy. |
| 1.3.6.1.4.1.664.5.75.2.1.3.7.2.1.7 | ColumnadGenY1731OneDmSessionAdminState | read-create | current | The administrative state of the 1DM transmit session. True indicates that the 1DM session is to function normally and actively transmit 1DMs towards the specif… |
| 1.3.6.1.4.1.664.5.75.2.1.3.7.2.1.8 | ColumnadGenY1731OneDmSessionStatus | read-only | current | Operational status of the 1DM transmit session. The minimum attributes that need to be set before a MEP can transmit 1DMs towards the target are: Target MEPID … |
| 1.3.6.1.4.1.664.5.75.2.1.3.7.2.1.9 | ColumnadGenY1731OneDmSessionStatusString | read-only | current | Operational status string of the 1DM transmit session. If the session is expected to be active but is not able to be due to a provisioning issue or conflict, t… |
| 1.3.6.1.4.1.664.5.75.2.1.3.7.2.1.10 | ColumnadGenY1731OneDmSessionInterframeDelay | read-create | current | Amount of time in milliseconds between 1DM transmissions. The supported range is 100 - 10,000 ms and the default value is 1000 ms. |
| 1.3.6.1.4.1.664.5.75.2.1.3.7.2.1.11 | ColumnadGenY1731OneDmSessionSize | read-create | current | Size of the 1DM in bytes. The size encompasses the entire Ethernet frame from the header through the FCS. The supported values are: 0 to indicate Data TLV shou… |
| 1.3.6.1.4.1.664.5.75.2.1.3.7.2.1.12 | ColumnadGenY1731OneDmSessionData | read-create | current | Data pattern to be used when padding is required to meet the size setting. The default value is 0x00 0x00. |
| 1.3.6.1.4.1.664.5.75.2.1.3.7.3 | TableadGenY1731OneDmSessionReceiveTable | not-accessible | current | The one-way frame-delay (ETH-1DM) receive table for a given local MEP. The local MEP's 1DM receive attributes can be edited using this table. These settings ar… |
| 1.3.6.1.4.1.664.5.75.2.1.3.7.3.1 | RowadGenY1731OneDmSessionReceiveEntry | not-accessible | current | The one-way frame-delay (1DM) performance monitoring session receive attributes of a local MEP. |
| 1.3.6.1.4.1.664.5.75.2.1.3.7.3.1.1 | ColumnadGenY1731OneDmSessionMeasurementInterval | read-create | current | Interval in seconds over which statistics are generated for received one-way frame delay sessions. The supported range is 60 - 900 seconds and the default valu… |
| 1.3.6.1.4.1.664.5.75.2.1.3.7.3.1.2 | ColumnadGenY1731OneDmSessionBulkDataExportFileTypes | read-create | current | Determines which, if any, files are generated by one-way frame delays calculated from received 1DM frames. The files are used to store one-way frame-delay stat… |
| 1.3.6.1.4.1.664.5.75.2.1.3.8 | NodeadGenY1731LocalMepSlm | |||
| 1.3.6.1.4.1.664.5.75.2.1.3.8.1 | NodeadGenY1731SlmScalars | |||
| 1.3.6.1.4.1.664.5.75.2.1.3.8.1.1 | ScalaradGenY1731SlmSessionMaxNumber | read-only | current | A systemwide value representing the maximum number of SLM sessions that can be created across all local MEPs on the device. |
| 1.3.6.1.4.1.664.5.75.2.1.3.8.1.2 | ScalaradGenY1731SlmSessionCurrentNumber | read-only | current | Current number of SLM sessions created. |
| 1.3.6.1.4.1.664.5.75.2.1.3.8.1.3 | ScalaradGenY1731SlmSessionLastCreateError | read-only | current | The reason for the last error that occurred while attempting to create an SLM Session Transmit entry (adGenY1731SlmSessionTransmitEntry). |
| 1.3.6.1.4.1.664.5.75.2.1.3.8.2 | TableadGenY1731SlmSessionTransmitTable | not-accessible | current | The synthetic single-ended frame-loss (SLM) session table for a given local MEP. The main difference between synthetic frame-loss (ETH-SLM) and normal frame-lo… |
| 1.3.6.1.4.1.664.5.75.2.1.3.8.2.1 | RowadGenY1731SlmSessionTransmitEntry | not-accessible | current | A synthetic single-ended frame-loss (SLM) performance monitoring session of a local MEP. A SLM PM session is unique based on target identifier and VLAN priorit… |
| 1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.1 | ColumnadGenY1731SlmSessionTargetRmepIdOrMacAddress | not-accessible | current | Indicates whether the target specified is a MEPID or a unicast MAC Address. If the target specified is a MEPID the local MEP will not be able to initiate the S… |
| 1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.2 | ColumnadGenY1731SlmSessionTarget | not-accessible | current | Octet string defining the target for the SLM session. If adGenY1731SlmSessionTargetRmepIdOrMacAddress indicates the target is a MEPID then the octet string sho… |
| 1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.3 | ColumnadGenY1731SlmSessionVlanPriority | not-accessible | current | VLAN Priority that will be used in all SLM frames sent by this SLM transmit session. |
| 1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.4 | ColumnadGenY1731SlmSessionTargetRemoteMepIdentifier | read-only | current | Target MEPID for this SLM session |
| 1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.5 | ColumnadGenY1731SlmSessionTargetMacAddress | read-only | current | Target MAC address for this SLM session |
| 1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.6 | ColumnadGenY1731SlmSessionRowStatus | read-create | current | This OID is used to create/delete a transmit SLM session of a Local MEP. The only supported settings are createAndGo, createAndWait, and destroy. |
| 1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.7 | ColumnadGenY1731SlmSessionAdminState | read-create | current | The administrative state of the SLM transmit session. True indicates that the SLM session is to function normally and actively transmit SLMs towards the specif… |
| 1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.8 | ColumnadGenY1731SlmSessionStatus | read-only | current | Operational status of the SLM transmit session. The minimum attributes that need to be set before a MEP can transmit SLMs towards the target are: Target MEPID … |
| 1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.9 | ColumnadGenY1731SlmSessionStatusString | read-only | current | Operational status string of the SLM transmit session. If the session is expected to be active but is not able to be due to a provisioning issue or conflict, t… |
| 1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.10 | ColumnadGenY1731SlmSessionInterframeDelay | read-create | current | Amount of time in milliseconds between SLM transmissions. The supported range is 100 - 10,000 ms and the default value is 1000 ms. |
| 1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.11 | ColumnadGenY1731SlmSessionMeasurementInterval | read-create | current | Interval in seconds over which statistics are generated. The supported range is 60 - 900 seconds and the default value is 60. The statistics calculated for a m… |
| 1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.12 | ColumnadGenY1731SlmSessionSize | read-create | current | Size of the SLM in bytes. The size encompasses the entire Ethernet frame from the header through the FCS. The supported values are: 0 to indicate Data TLV shou… |
| 1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.13 | ColumnadGenY1731SlmSessionData | read-create | current | Data pattern to be used when padding is required to meet the size setting. The default value is 0x00 0x00. |
| 1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.14 | ColumnadGenY1731SlmSessionBulkDataExportFileTypes | read-create | current | Determines which, if any, files are generated by this SLM transmit session. The files are used to store synthetic single-ended frame-loss statistics. The avera… |
| 1.3.6.1.4.1.664.5.75.2.1.3.9 | NodeadGenY1731LocalMepClm | |||
| 1.3.6.1.4.1.664.5.75.2.1.3.9.1 | TableadGenY1731ClmReceiverTable | not-accessible | current | A local MEP can be provisioned to calculate near-end frame-loss between it and a known RMEP by monitoring sequence numbers in received CCMs. This method is ref… |
| 1.3.6.1.4.1.664.5.75.2.1.3.9.1.1 | RowadGenY1731ClmReceiverEntry | not-accessible | current | The receive properties for a local MEP's CLM function. The properties are unique to a local MEP. |
| 1.3.6.1.4.1.664.5.75.2.1.3.9.1.1.1 | ColumnadGenY1731ClmReceiverEnabled | read-write | current | Configures the administrative state of the local MEP's ETH-CLM function. If the ETH-CLM function is enabled, the MEP will monitor the sequence-numbers in CCMs … |
| 1.3.6.1.4.1.664.5.75.2.1.3.9.1.1.2 | ColumnadGenY1731ClmReceiverMeasurementInterval | read-write | current | Interval in seconds over which statistics are generated. The supported range is 60 - 900 seconds and the default value is 60. The statistics calculated for a m… |
| 1.3.6.1.4.1.664.5.75.2.1.3.9.1.1.3 | ColumnadGenY1731ClmReceiverBulkDataExportFileTypes | read-write | current | Determines which, if any, files are generated by this local MEP's CLM function. The files are used to store near-end frame-loss statistics calculated by the lo… |
| 1.3.6.1.4.1.664.5.75.2.1.4 | NodeadGenY1731Events | |||
| 1.3.6.1.4.1.664.5.75.2.1.4.0 | NodeadGenY1731Traps | |||
| 1.3.6.1.4.1.664.5.75.2.1.4.0.1 | NotificationadGenY1731PMFlashFilesClear | current | This trap indicates all current and stored bulk PM files have been successfully exported to the server. | |
| 1.3.6.1.4.1.664.5.75.2.1.4.0.2 | NotificationadGenY1731PMFlashFilesSet | current | This trap indicates that the Y1731 PM File transferred to flash because bulk data export transfer failed. | |
| 1.3.6.1.4.1.664.6.10000.75.2.1 | IdentityadGenY1731MIB | This MIB defines the objects for the Y.1731 MIB. |