adtran/ADTRAN-GENMUXPONDER-MIB
288 objects
This MIB defines the objects for the Muxponder MIB.
Imported Objects
| ADTRAN-GENSLOT-MIB | adGenSlotInfoIndex |
| ADTRAN-GENTRAPINFORM-MIB | adTrapInformSeqNum |
| ADTRAN-SHARED-CND-SYSTEM-MIB MISSING | adGenMuxPonder adGenMuxPonderID |
| ADTRAN-SHARED-CND-SYSTEM-TC-MIB MISSING | GenSystemInterfaceType |
| ADTRAN-TAeSCUEXT1-MIB | adTAeSCUTrapAlarmLevel |
| IF-MIB | ifIndex InterfaceIndex InterfaceIndexOrZero |
| SNMPv2-MIB | sysName |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.664.5.70.26.1 | NodeadGenMuxPPhysIfProv | |||
| 1.3.6.1.4.1.664.5.70.26.1.1 | TableadGenMuxPPhysIfProvTable | not-accessible | current | The Muxponder Physical Interface provisioning table. |
| 1.3.6.1.4.1.664.5.70.26.1.1.1 | RowadGenMuxPPhysIfProvEntry | not-accessible | current | An entry in the Muxponder Physical Interface provisioning table. |
| 1.3.6.1.4.1.664.5.70.26.1.1.1.1 | ColumnadGenMuxPPhysIfType | read-write | current | Control for setting the physical interface type. The intial release of the Muxponder cards will only support the retrieval of this OID to determine the Interfa… |
| 1.3.6.1.4.1.664.5.70.26.1.1.1.2 | ColumnadGenMuxPPeerIpAddress | read-write | deprecated | This variable is used to indicate the IP address of the peer device connected to the interface. This object is deprecated. Use OID adGenPeerAdjacencyLogicalIpA… |
| 1.3.6.1.4.1.664.5.70.26.1.1.1.3 | ColumnadGenMuxPPeerChassisId | read-write | deprecated | This string is used to specify the chassis name of the peer device connected to the interface. It is recommended to use the peer device TID as the chassis name… |
| 1.3.6.1.4.1.664.5.70.26.1.1.1.4 | ColumnadGenMuxPPeerPortId | read-write | deprecated | This string is used to specify the port identification of the peer device connected to the interface. It is recommended to specify the interface type of the pe… |
| 1.3.6.1.4.1.664.5.70.26.1.1.1.5 | ColumnadGenMuxPFacilityLoopbackEnable | read-write | current | Enables/disables a facility loopback on the indexed port interface. |
| 1.3.6.1.4.1.664.5.70.26.1.1.1.6 | ColumnadGenMuxPFacilityLoopbackTimeout | read-write | current | Used to specify a length of time in minutes before the facility loopback is automatically removed. |
| 1.3.6.1.4.1.664.5.70.26.1.1.1.7 | ColumnadGenMuxPFacilityLoopbackTimeRemaining | read-only | current | Used to indicate the time remaining before the facility loopback is automatically removed. Format of string: hh:mm:ss |
| 1.3.6.1.4.1.664.5.70.26.1.1.1.8 | ColumnadGenMuxPTerminalLoopbackEnable | read-write | current | Enables/disables a terminal loopback on the indexed port interface. |
| 1.3.6.1.4.1.664.5.70.26.1.1.1.9 | ColumnadGenMuxPTerminalLoopbackTimeout | read-write | current | Used to specify a length of time in minutes before the terminal loopback is automatically removed. |
| 1.3.6.1.4.1.664.5.70.26.1.1.1.10 | ColumnadGenMuxPTerminalLoopbackTimeRemaining | read-only | current | Used to indicate the time remaining before the terminal loopback is automatically removed. Format of string: hh:mm:ss |
| 1.3.6.1.4.1.664.5.70.26.1.1.1.11 | ColumnadGenMuxPYCableEnable | read-write | current | Used to enable or disable the YCable support. |
| 1.3.6.1.4.1.664.5.70.26.1.1.1.12 | ColumnadGenMuxPProtectedPairEnable | read-write | current | Used to enable or disable the use of a protected-pair to provide protection between a pair of interfaces. |
| 1.3.6.1.4.1.664.5.70.26.1.1.1.13 | ColumnadGenMuxPForwardingGroupLimitedEnable | read-write | current | Setting this value to True adds this port to a group of ports that are limited with respect to port forwarding. Ports within the limited forwarding group are n… |
| 1.3.6.1.4.1.664.5.70.26.2 | NodeadGenMuxPCrossConnectProv | |||
| 1.3.6.1.4.1.664.5.70.26.2.1 | TableadGenMuxPCrossConnectTable | not-accessible | current | The Muxponder Cross-Connect table. |
| 1.3.6.1.4.1.664.5.70.26.2.1.1 | RowadGenMuxPCrossConnectEntry | not-accessible | current | An entry in the Muxponder Cross-Connect table. |
| 1.3.6.1.4.1.664.5.70.26.2.1.1.1 | ColumnadGenMuxPCrossConnectName | not-accessible | current | Cross-Connect name. |
| 1.3.6.1.4.1.664.5.70.26.2.1.1.2 | ColumnadGenMuxPCrossConnectType | read-create | current | Cross-Connect type. |
| 1.3.6.1.4.1.664.5.70.26.2.1.1.3 | ColumnadGenMuxPCrossConnectSrcType | read-only | current | This is used to indicate the payload type of the source endpoint. |
| 1.3.6.1.4.1.664.5.70.26.2.1.1.4 | ColumnadGenMuxPCrossConnectSrcIfIndex | read-create | current | The IfIndex of the source endpoint. |
| 1.3.6.1.4.1.664.5.70.26.2.1.1.5 | ColumnadGenMuxPCrossConnectDstType | read-create | current | This is used to indicate the payload type of the destination endpoint. |
| 1.3.6.1.4.1.664.5.70.26.2.1.1.6 | ColumnadGenMuxPCrossConnectDstIfIndex | read-create | current | The IfIndex of the destination endpoint. |
| 1.3.6.1.4.1.664.5.70.26.2.1.1.7 | ColumnadGenMuxPCrossConnectRowStatus | read-create | current | Cross-Connect Row Status. |
| 1.3.6.1.4.1.664.5.70.26.2.1.1.8 | ColumnadGenMuxPCrossConnectLastProvError | read-only | current | This string describes the last error experienced for this particular entry in the table. |
| 1.3.6.1.4.1.664.5.70.26.2.2 | TableadGenMuxPCrossConnectLastCreateErrorTable | not-accessible | current | The Muxponder Cross-Connect last create error table. Table that indicates the last error that occurred during creation of a cross-connect. |
| 1.3.6.1.4.1.664.5.70.26.2.2.1 | RowadGenMuxPCrossConnectLastCreateErrorEntry | not-accessible | current | An entry in the Muxponder Cross-Connect Last Create Error table. |
| 1.3.6.1.4.1.664.5.70.26.2.2.1.1 | ColumnadGenMuxPCrossConnectLastCreateError | read-only | current | The last error that occurred during the creation of a cross-connect. |
| 1.3.6.1.4.1.664.5.70.26.2.3 | TableadGenMuxPPortCrossConnectStatusTable | not-accessible | current | The Muxponder Port Cross-Connect Status table. |
| 1.3.6.1.4.1.664.5.70.26.2.3.1 | RowadGenMuxPPortCrossConnectStatusEntry | not-accessible | current | An entry in the Muxponder Port Cross-Connect Status table. |
| 1.3.6.1.4.1.664.5.70.26.2.3.1.1 | ColumnadGenMuxPPortCrossConnectName | read-only | current | Cross-Connect name. |
| 1.3.6.1.4.1.664.5.70.26.2.3.1.2 | ColumnadGenMuxPPortCrossConnectStatus | read-only | current | This OID indicates whether this port is defined as a source, destination or both for this cross-connect. |
| 1.3.6.1.4.1.664.5.70.26.3 | NodeadGenMuxPProtGroupProv | |||
| 1.3.6.1.4.1.664.5.70.26.3.1 | TableadGenMuxPProtGroupTable | not-accessible | current | The Muxponder Protection Group table. This table is used to create protection groups out of two interfaces. |
| 1.3.6.1.4.1.664.5.70.26.3.1.1 | RowadGenMuxPProtGroupEntry | not-accessible | current | An entry in the Muxponder Protection Group table. |
| 1.3.6.1.4.1.664.5.70.26.3.1.1.1 | ColumnadGenMuxPProtGroupName | not-accessible | current | Protection Group name. |
| 1.3.6.1.4.1.664.5.70.26.3.1.1.2 | ColumnadGenMuxPProtGroupType | read-create | current | Protection Group type. |
| 1.3.6.1.4.1.664.5.70.26.3.1.1.3 | ColumnadGenMuxPProtGroupWorkingType | read-only | current | This is used to indicate the payload type of the working entity. |
| 1.3.6.1.4.1.664.5.70.26.3.1.1.4 | ColumnadGenMuxPProtGroupWorkingIfIndex | read-create | current | The IfIndex of the working entity. |
| 1.3.6.1.4.1.664.5.70.26.3.1.1.5 | ColumnadGenMuxPProtGroupProtectingType | read-create | current | This is used to indicate the payload type of the protecting entity. |
| 1.3.6.1.4.1.664.5.70.26.3.1.1.6 | ColumnadGenMuxPProtGroupProtectingIfIndex | read-create | current | The IfIndex of the protecting entity. |
| 1.3.6.1.4.1.664.5.70.26.3.1.1.7 | ColumnadGenMuxPProtGroupRowStatus | read-create | current | Protection Group Row Status. |
| 1.3.6.1.4.1.664.5.70.26.3.1.1.8 | ColumnadGenMuxPProtGroupLastProvError | read-only | current | This string describes the last error experienced for this particular entry in the table. |
| 1.3.6.1.4.1.664.5.70.26.3.1.1.9 | ColumnadGenMuxPProtGroupWorkIsOnline | read-only | current | Indicates whether or not the working-entity is online. If not, the protect-entity is online. |
| 1.3.6.1.4.1.664.5.70.26.3.1.1.10 | ColumnadGenMuxPProtGroupSwitchCommands | read-create | current | Protection Group Switch Commands. |
| 1.3.6.1.4.1.664.5.70.26.3.1.1.11 | ColumnadGenMuxPProtGroupWorkEntityStatus | read-only | current | Working Entity Signal Status. |
| 1.3.6.1.4.1.664.5.70.26.3.1.1.12 | ColumnadGenMuxPProtGroupProtectEntityStatus | read-only | current | Protect Entity Signal Status. |
| 1.3.6.1.4.1.664.5.70.26.3.1.1.13 | ColumnadGenMuxPProtGroupRevertiveEnable | read-create | current | Enables/disables revertive switching for this protection group. |
| 1.3.6.1.4.1.664.5.70.26.3.1.1.14 | ColumnadGenMuxPProtGroupWaitToRestoreTime | read-create | current | Wait to restore time(in minutes). |
| 1.3.6.1.4.1.664.5.70.26.3.1.1.15 | ColumnadGenMuxPProtGroupTxK1Request | read-only | current | Transmit K1 byte Request. |
| 1.3.6.1.4.1.664.5.70.26.3.1.1.16 | ColumnadGenMuxPProtGroupTxK1RequestChannel | read-only | current | Transmit K1 byte Request Channel. |
| 1.3.6.1.4.1.664.5.70.26.3.1.1.17 | ColumnadGenMuxPProtGroupTxK2BridgeChannel | read-only | current | Transmit K2 byte Bridge Channel. |
| 1.3.6.1.4.1.664.5.70.26.3.1.1.18 | ColumnadGenMuxPProtGroupTxK2APSArchitecture | read-only | current | Transmit K2 byte APS Architecture. |
| 1.3.6.1.4.1.664.5.70.26.3.1.1.19 | ColumnadGenMuxPProtGroupTxK2APSMode | read-only | current | Transmit K2 byte APS Mode. |
| 1.3.6.1.4.1.664.5.70.26.3.1.1.20 | ColumnadGenMuxPProtGroupRxK1Request | read-only | current | Receive K1 byte Request. If notAvailable is returned, then the following OIDs are not valid: adGenMuxPProtGroupRxK1RequestChannel, adGenMuxPProtGroupRxK2Bridge… |
| 1.3.6.1.4.1.664.5.70.26.3.1.1.21 | ColumnadGenMuxPProtGroupRxK1RequestChannel | read-only | current | Receive K1 byte Request Channel. |
| 1.3.6.1.4.1.664.5.70.26.3.1.1.22 | ColumnadGenMuxPProtGroupRxK2BridgeChannel | read-only | current | Receive K2 byte Bridge Channel. |
| 1.3.6.1.4.1.664.5.70.26.3.1.1.23 | ColumnadGenMuxPProtGroupRxK2APSArchitecture | read-only | current | Receive K2 byte APS Architecture. |
| 1.3.6.1.4.1.664.5.70.26.3.1.1.24 | ColumnadGenMuxPProtGroupRxK2APSMode | read-only | current | Receive K2 byte APS Mode. |
| 1.3.6.1.4.1.664.5.70.26.3.1.1.25 | ColumnadGenMuxPProtGroupOperStatus | read-only | current | Operational Status of the Protection Group. This operational status indicates whether or not the provisioning necessary for protection switching to function pr… |
| 1.3.6.1.4.1.664.5.70.26.3.1.1.26 | ColumnadGenMuxPProtGroupStatusString | read-only | current | The status string for the protection group. Indicates why the protection group is down. If protection group is up, then a blank string will be returned. |
| 1.3.6.1.4.1.664.5.70.26.3.1.1.27 | ColumnadGenMuxPProtGroupWaitToRestoreRemainingTime | read-only | current | The remaining time(in seconds) to restore the entity when wait to restore is enabled. |
| 1.3.6.1.4.1.664.5.70.26.3.2 | TableadGenMuxPProtGroupLastCreateErrorTable | not-accessible | current | The Muxponder Protection Group Last Create Error table. This table is used to indicate the last error that occurred during creation of a protection group. |
| 1.3.6.1.4.1.664.5.70.26.3.2.1 | RowadGenMuxPProtGroupLastCreateErrorEntry | not-accessible | current | An entry in the Muxponder Protection Group Last Create Error table. |
| 1.3.6.1.4.1.664.5.70.26.3.2.1.1 | ColumnadGenMuxPProtGroupLastCreateError | read-only | current | The last error that occurred during the creation of a protection group. |
| 1.3.6.1.4.1.664.5.70.26.3.3 | TableadGenMuxPEthernetProtGroupTable | not-accessible | current | The Ethernet Protection Group table. This table is used to create protection groups between two Ethernet interfaces. |
| 1.3.6.1.4.1.664.5.70.26.3.3.1 | RowadGenMuxPEthernetProtGroupEntry | not-accessible | current | An entry in the Ethernet Protection Group table. |
| 1.3.6.1.4.1.664.5.70.26.3.3.1.1 | ColumnadGenMuxPEthernetProtGroupName | not-accessible | current | Protection Group name. |
| 1.3.6.1.4.1.664.5.70.26.3.3.1.2 | ColumnadGenMuxPEthernetProtGroupType | read-create | current | Protection Group type. |
| 1.3.6.1.4.1.664.5.70.26.3.3.1.3 | ColumnadGenMuxPEthernetProtGroupWorkingType | read-only | current | The payload type of the working entity. |
| 1.3.6.1.4.1.664.5.70.26.3.3.1.4 | ColumnadGenMuxPEthernetProtGroupWorkingIfIndex | read-create | current | The IfIndex of the working entity. |
| 1.3.6.1.4.1.664.5.70.26.3.3.1.5 | ColumnadGenMuxPEthernetProtGroupProtectingType | read-only | current | The payload type of the protecting entity. |
| 1.3.6.1.4.1.664.5.70.26.3.3.1.6 | ColumnadGenMuxPEthernetProtGroupProtectingIfIndex | read-create | current | The IfIndex of the protecting entity. |
| 1.3.6.1.4.1.664.5.70.26.3.3.1.7 | ColumnadGenMuxPEthernetProtGroupRowStatus | read-create | current | Protection Group Row Status. |
| 1.3.6.1.4.1.664.5.70.26.3.3.1.8 | ColumnadGenMuxPEthernetProtGroupLastProvError | read-only | current | This string describes the last error experienced for this particular entry in the table. |
| 1.3.6.1.4.1.664.5.70.26.3.3.1.9 | ColumnadGenMuxPEthernetProtGroupOperStatus | read-only | current | Operational Status of the Protection Group. This operational status indicates whether or not the provisioning necessary for protection switching to function pr… |
| 1.3.6.1.4.1.664.5.70.26.3.3.1.10 | ColumnadGenMuxPEthernetProtGroupStatusString | read-only | current | The status string for the protection group. Indicates why the protection group is down. If protection group is up, then a blank string will be returned. |
| 1.3.6.1.4.1.664.5.70.26.3.3.1.11 | ColumnadGenMuxPEthernetProtGroupWorkIsOnline | read-only | current | Indicates whether or not the working-entity is online. If not, the protect-entity is online. |
| 1.3.6.1.4.1.664.5.70.26.3.3.1.12 | ColumnadGenMuxPEthernetProtGroupSwitchCommands | read-create | current | Protection Group Switch Commands. |
| 1.3.6.1.4.1.664.5.70.26.3.3.1.13 | ColumnadGenMuxPEthernetProtGroupWorkEntityStatus | read-only | current | Working Entity Signal Status. |
| 1.3.6.1.4.1.664.5.70.26.3.3.1.14 | ColumnadGenMuxPEthernetProtGroupProtectEntityStatus | read-only | current | Protect Entity Signal Status. |
| 1.3.6.1.4.1.664.5.70.26.3.3.1.15 | ColumnadGenMuxPEthernetProtGroupRevertiveEnable | read-create | current | Enables/disables revertive switching for this protection group. |
| 1.3.6.1.4.1.664.5.70.26.3.3.1.16 | ColumnadGenMuxPEthernetProtGroupWaitToRestoreTime | read-create | current | Wait to restore time(in minutes). |
| 1.3.6.1.4.1.664.5.70.26.3.3.1.17 | ColumnadGenMuxPEthernetProtGroupWaitToRestoreRemainingTime | read-only | current | The remaining time(in seconds) to restore the entity when wait to restore is enabled. |
| 1.3.6.1.4.1.664.5.70.26.3.4 | TableadGenMuxPEthernetProtGroupLastCreateErrorTable | not-accessible | current | The Ethernet Protection Group Last Create Error table. This table is used to indicate the last error that occurred during creation of a protection group. |
| 1.3.6.1.4.1.664.5.70.26.3.4.1 | RowadGenMuxPEthernetProtGroupLastCreateErrorEntry | not-accessible | current | An entry in the Ethernet Protection Group Last Create Error table. |
| 1.3.6.1.4.1.664.5.70.26.3.4.1.1 | ColumnadGenMuxPEthernetProtGroupLastCreateError | read-only | current | The last error that occurred during the creation of a protection group. |
| 1.3.6.1.4.1.664.5.70.26.4 | NodeadGenMuxPLagGroupProv | |||
| 1.3.6.1.4.1.664.5.70.26.4.1 | TableadGenMuxPLagGroupTable | not-accessible | current | The Link Aggregation Group table. |
| 1.3.6.1.4.1.664.5.70.26.4.1.1 | RowadGenMuxPLagGroupEntry | not-accessible | current | An entry in the Link Aggregation Group table. The indexing is per the LAG interface index. The IANA type is linegroup (210). |
| 1.3.6.1.4.1.664.5.70.26.4.1.1.1 | ColumnadGenMuxPLagGroupRowStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. Setting this value to 'active' indicates that the LAG is administrat… |
| 1.3.6.1.4.1.664.5.70.26.4.1.1.2 | ColumnadGenMuxPLagGroupOperStatus | read-only | current | The current operational status of the local end of the LAG. |
| 1.3.6.1.4.1.664.5.70.26.4.1.1.3 | ColumnadGenMuxPLagGroupNumber | read-only | current | The LAG number n, where n is between 1 and the maximum number of LAG groups. |
| 1.3.6.1.4.1.664.5.70.26.4.1.1.4 | ColumnadGenMuxPLagGroupName | read-create | current | The textual name given to this LAG. |
| 1.3.6.1.4.1.664.5.70.26.4.1.1.5 | ColumnadGenMuxPLagGroupMaxNumCfgLinks | read-create | current | The maximum number of ports that may be configured on this LAG group. |
| 1.3.6.1.4.1.664.5.70.26.4.1.1.6 | ColumnadGenMuxPLagGroupNumCfgLinks | read-only | current | The actual number of ports configured on this LAG group. |
| 1.3.6.1.4.1.664.5.70.26.4.1.1.7 | ColumnadGenMuxPLagGroupMinNumActLinks | read-create | current | The minimum number of active port links that have to be mapped to this LAG before the OperStatus of the LAG can be declared 'up'. If the active number ever dro… |
| 1.3.6.1.4.1.664.5.70.26.4.1.1.8 | ColumnadGenMuxPLagGroupNumActLinks | read-only | current | The actual number of active port links that are 'up'. |
| 1.3.6.1.4.1.664.5.70.26.4.1.1.9 | ColumnadGenMuxPLagGroupLastChange | read-only | current | The value of sysUpTime at the time this LAG group entered its current operational state. |
| 1.3.6.1.4.1.664.5.70.26.4.1.1.10 | ColumnadGenMuxPLagGroupLastError | read-only | current | The string describing the last error experienced. |
| 1.3.6.1.4.1.664.5.70.26.4.1.1.11 | ColumnadGenMuxPLagGroupMinActLinkAlarmEnable | read-create | current | Enable or disable the minimum active links alarm for this link aggregation group. |
| 1.3.6.1.4.1.664.5.70.26.4.2 | TableadGenMuxPLagGroupLastCreateErrorTable | not-accessible | current | The Muxponder LAG Group Last Create Error table. This table is used to indicate the last error that occurred during creation of a LAG group. |
| 1.3.6.1.4.1.664.5.70.26.4.2.1 | RowadGenMuxPLagGroupLastCreateErrorEntry | not-accessible | current | An entry in the Muxponder LAG Group Last Create Error table. |
| 1.3.6.1.4.1.664.5.70.26.4.2.1.1 | ColumnadGenMuxPLagGroupLastCreateError | read-only | current | The last error that occurred during the creation of a LAG. |
| 1.3.6.1.4.1.664.5.70.26.4.3 | TableadGenMuxPLagPortMapTable | not-accessible | current | Row creation adds/maps a physical port to a LAG. |
| 1.3.6.1.4.1.664.5.70.26.4.3.1 | RowadGenMuxPLagPortMapEntry | not-accessible | current | An entry in the Port Map table. This entry associates one port with a LAG. Indexing is via LAG interface index and faceplate port interface index. |
| 1.3.6.1.4.1.664.5.70.26.4.3.1.1 | ColumnadGenMuxPLagPortMapPort | not-accessible | current | Faceplate port interface index. |
| 1.3.6.1.4.1.664.5.70.26.4.3.1.2 | ColumnadGenMuxPLagPortMapRowStatus | read-create | current | This object is used to create a new row or delete an existing row in this table. Setting this value to �createAndGo� adds the port to the LAG. Setting this… |
| 1.3.6.1.4.1.664.5.70.26.4.3.1.3 | ColumnadGenMuxPLagPortMapOperStatus | read-only | current | The current operational status of the LAG-Port mapping indicating if the physical port is actively participating in the LAG. This can be down if the row status… |
| 1.3.6.1.4.1.664.5.70.26.4.3.1.4 | ColumnadGenMuxPLagPortMapLagNumber | read-only | current | The LAG number n, where n is between 1 and the maximum number of LAG groups. |
| 1.3.6.1.4.1.664.5.70.26.4.3.1.5 | ColumnadGenMuxPLagPortMapPortNumber | read-only | current | The faceplate port number n, where n is between 1 and the number of faceplate ports. |
| 1.3.6.1.4.1.664.5.70.26.4.3.1.6 | ColumnadGenMuxPLagPortMapLastChange | read-only | current | The value of sysUpTime at the time this LAG-Port mapping entered its current operational state. |
| 1.3.6.1.4.1.664.5.70.26.4.3.1.7 | ColumnadGenMuxPLagPortMapLastError | read-only | current | The string describing the last error experienced. |
| 1.3.6.1.4.1.664.5.70.26.4.4 | TableadGenMuxPLagPortMapLastCreateErrorTable | not-accessible | current | The Muxponder LAG-Port Last Create Error table. This table is used to indicate the last error that occurred during creation of a LAG-Port map. |
| 1.3.6.1.4.1.664.5.70.26.4.4.1 | RowadGenMuxPLagPortMapLastCreateErrorEntry | not-accessible | current | An entry in the Muxponder LAG-Port Last Create Error table. The table is indexed by the LAG group for which the port create failed. |
| 1.3.6.1.4.1.664.5.70.26.4.4.1.1 | ColumnadGenMuxPLagPortMapLastCreateError | read-only | current | The last error that occurred during the creation of a LAG. |
| 1.3.6.1.4.1.664.5.70.26.4.5 | TableadGenMuxPLagPortStatusTable | not-accessible | current | Displays the status of the available ports in the system, including which LAG group (if any) a port is associated. |
| 1.3.6.1.4.1.664.5.70.26.4.5.1 | RowadGenMuxPLagPortStatusEntry | not-accessible | current | An entry in the Port Status table. Each entry is represents one port. |
| 1.3.6.1.4.1.664.5.70.26.4.5.1.1 | ColumnadGenMuxPLagPortStatusLagIfIndex | read-only | current | The ifIndex value of the LAG group of which this port is apart. A value of '0' indicates that the port is currently not mapped to any LAG group. IANA type shou… |
| 1.3.6.1.4.1.664.5.70.26.4.5.1.2 | ColumnadGenMuxPLagPortStatusOperStatus | read-only | current | The current operational status of the LAG-Port mapping indicating if the physical port is actively participating in the LAG. This can be down if the row status… |
| 1.3.6.1.4.1.664.5.70.26.5 | NodeadGenMuxPTiming | |||
| 1.3.6.1.4.1.664.5.70.26.5.1 | NodeadGenMuxPTimingProv | |||
| 1.3.6.1.4.1.664.5.70.26.5.1.1 | TableadGenMuxPTimingProvTable | not-accessible | current | The Muxponder Timing provisioning table. |
| 1.3.6.1.4.1.664.5.70.26.5.1.1.1 | RowadGenMuxPTimingProvEntry | not-accessible | current | An entry in the Muxponder Timing provisioning table. |
| 1.3.6.1.4.1.664.5.70.26.5.1.1.1.1 | ColumnadGenMuxPTimingPrimarySourceSelection | read-write | current | The timing source selection for the primary timing source. If the timing source selection is an Interface or InterfaceFixed, the interface index must be provis… |
| 1.3.6.1.4.1.664.5.70.26.5.1.1.1.2 | ColumnadGenMuxPTimingPrimarySourceInterface | read-write | current | The interface index for the primary timing source. If the primary timing source selection is an Interface or InterfaceFixed, set this variable to the interface… |
| 1.3.6.1.4.1.664.5.70.26.5.1.1.1.3 | ColumnadGenMuxPTimingSecondarySourceSelection | read-write | current | The timing source selection for the secondary timing source. If the timing source selection is an Interface or InterfaceFixed, the interface index must be prov… |
| 1.3.6.1.4.1.664.5.70.26.5.1.1.1.4 | ColumnadGenMuxPTimingSecondarySourceInterface | read-write | current | The interface index for the secondary timing source. If the secondary timing source selection is an Interface or InterfaceFixed, set this variable to the inter… |
| 1.3.6.1.4.1.664.5.70.26.5.1.1.1.5 | ColumnadGenMuxPTimingAlarmEnablePrimaryFailed | read-write | current | This variable indicates the primary timing source failed alarm flag. Setting this variable to true will generate an alarm when the primary timing source fails. |
| 1.3.6.1.4.1.664.5.70.26.5.1.1.1.6 | ColumnadGenMuxPTimingAlarmEnableSecondaryFailed | read-write | current | This variable indicates the secondary timing source failed alarm flag. Setting this variable to true will generate an alarm when the secondary timing source fa… |
| 1.3.6.1.4.1.664.5.70.26.5.1.1.1.7 | ColumnadGenMuxPTimingAlarmEnableHoldover | read-write | current | This variable indicates the holdover alarm flag. Setting this variable to true will generate an alarm when both the primary and secondary timing source fails a… |
| 1.3.6.1.4.1.664.5.70.26.5.1.1.1.8 | ColumnadGenMuxPTimingReceiveSSMEnable | read-write | deprecated | This variable indicates the clock selection process as described in ITU-T standard G.781 section 5.12. If set to enable, then the incoming SSM messages are ena… |
| 1.3.6.1.4.1.664.5.70.26.5.1.1.1.9 | ColumnadGenMuxPTimingForceClockFailover | read-write | current | Writing 1 to this object will cause the clock source to failover. |
| 1.3.6.1.4.1.664.5.70.26.5.1.1.1.10 | ColumnadGenMuxPTimingRevertiveSwitchType | read-write | current | This variable indicates the clock selection process as described in ITU-T standard G.781 section 5.12. If set to ssm, then the incoming SSM messages are enable… |
| 1.3.6.1.4.1.664.5.70.26.5.1.1.1.11 | ColumnadGenMuxPTimingLastError | read-only | current | The string describing the last error experienced during provisioning changes. |
| 1.3.6.1.4.1.664.5.70.26.5.1.1.1.12 | ColumnadGenMuxPTimingSystemTimingType | read-write | current | This variable indicates the type of the system timing generated by the module. If set to loopA/loopB, the module will provide packet based timing references to… |
| 1.3.6.1.4.1.664.5.70.26.5.1.2 | TableadGenMuxPTimingProvPortTable | not-accessible | current | The Muxponder Timing port provisioning table. |
| 1.3.6.1.4.1.664.5.70.26.5.1.2.1 | RowadGenMuxPTimingProvPortEntry | not-accessible | current | An entry in the Muxponder Timing port provisioning table. |
| 1.3.6.1.4.1.664.5.70.26.5.1.2.1.1 | ColumnadGenMuxPTimingTransmitSSMEnable | read-write | current | This object indicates if SSM transmission is enabled/disabled on a port. |
| 1.3.6.1.4.1.664.5.70.26.5.1.2.1.2 | ColumnadGenMuxPTimingEsmcType | read-write | current | This object is applicable only to SyncE interfaces. This variable indicates the ESMC type(EEC options) selected for the port. The EEC (Ethernet Equipment Clock… |
| 1.3.6.1.4.1.664.5.70.26.5.2 | NodeadGenMuxPTimingStatus | |||
| 1.3.6.1.4.1.664.5.70.26.5.2.1 | TableadGenMuxPTimingStatusTable | not-accessible | current | The Muxponder Timing status table. |
| 1.3.6.1.4.1.664.5.70.26.5.2.1.1 | RowadGenMuxPTimingStatusEntry | not-accessible | current | An entry in the Muxponder Timing status table. |
| 1.3.6.1.4.1.664.5.70.26.5.2.1.1.1 | ColumnadGenMuxPTimingCurrentSourceType | read-only | current | Displays which timing source is currently in use by the system. |
| 1.3.6.1.4.1.664.5.70.26.5.2.1.1.2 | ColumnadGenMuxPTimingPrimarySourceHealth | read-only | current | Displays the health of the primary timing source. |
| 1.3.6.1.4.1.664.5.70.26.5.2.1.1.3 | ColumnadGenMuxPTimingSecondarySourceHealth | read-only | current | Displays the health of the secondary timing source. |
| 1.3.6.1.4.1.664.5.70.26.5.2.1.1.4 | ColumnadGenMuxPTimingPrimarySourceRxSSM | read-only | current | This variable indicates the SSM value received by the primary clock source. |
| 1.3.6.1.4.1.664.5.70.26.5.2.1.1.5 | ColumnadGenMuxPTimingSecondarySourceRxSSM | read-only | current | This variable indicates the SSM value received by the secondary clock source. |
| 1.3.6.1.4.1.664.5.70.26.5.2.1.1.6 | ColumnadGenMuxPTimingTxSSM1 | read-only | current | This variable indicates the SSM value transmitted by E1 Optimized(SDH) or SyncE EEC-Option 1 ports. |
| 1.3.6.1.4.1.664.5.70.26.5.2.1.1.7 | ColumnadGenMuxPTimingTxSSM2 | read-only | current | This variable indicates the SSM value transmitted by T1 Optimized(SONET) or SyncE EEC-Option 2 ports. |
| 1.3.6.1.4.1.664.5.70.26.5.3 | NodeadGenMuxPTimingAlarmPrefix | |||
| 1.3.6.1.4.1.664.5.70.26.5.3.0 | NodeadGenMuxPTimingAlarms | |||
| 1.3.6.1.4.1.664.5.70.26.5.3.0.2 | NotificationadGenMuxPTimingPriSrcFailClear | current | Indicates that the primary timing source alarm has cleared. | |
| 1.3.6.1.4.1.664.5.70.26.5.3.0.3 | NotificationadGenMuxPTimingPriSrcFailSet | current | Indicates that the primary timing source has failed. | |
| 1.3.6.1.4.1.664.5.70.26.5.3.0.4 | NotificationadGenMuxPTimingSecSrcFailClear | current | Indicates that the secondary timing source alarm has cleared. | |
| 1.3.6.1.4.1.664.5.70.26.5.3.0.5 | NotificationadGenMuxPTimingSecSrcFailSet | current | Indicates that the secondary timing source has failed. | |
| 1.3.6.1.4.1.664.5.70.26.5.3.0.6 | NotificationadGenMuxPTimingHoldoverClear | current | Indicates that the holdover timing source alarm has cleared. | |
| 1.3.6.1.4.1.664.5.70.26.5.3.0.7 | NotificationadGenMuxPTimingHoldoverSet | current | Indicates that the holdover timing source is used. | |
| 1.3.6.1.4.1.664.5.70.26.6 | NodeadGenMuxPPhysPeerProv | |||
| 1.3.6.1.4.1.664.5.70.26.6.1 | TableadGenMuxPPhysPeerProvTable | not-accessible | deprecated | The Muxponder Physical Peer Provisioning table. This table is used to configure physical port connection information of bi-directional ports. This table is dep… |
| 1.3.6.1.4.1.664.5.70.26.6.1.1 | RowadGenMuxPPhysPeerProvEntry | not-accessible | deprecated | An entry in the Muxponder Physical Peer Provisioning table. |
| 1.3.6.1.4.1.664.5.70.26.6.1.1.1 | ColumnadGenMuxPPhysPeerOneIpAddressTx | read-write | deprecated | This variable is used to indicate the IP address of the peer device connected to the Transmit component of a bi-directional interface. This object is deprecate… |
| 1.3.6.1.4.1.664.5.70.26.6.1.1.2 | ColumnadGenMuxPPhysPeerOneIpAddressRx | read-write | deprecated | This variable is used to indicate the IP address of the peer device connected to the Receive component of a bi-directional interface. This object is deprecated… |
| 1.3.6.1.4.1.664.5.70.26.6.1.1.3 | ColumnadGenMuxPPhysPeerOneChassisIdTx | read-write | deprecated | This string is used to indicate the chassis name of the peer device connected to the Transmit component of a bi-directional interface. It is recommended to use… |
| 1.3.6.1.4.1.664.5.70.26.6.1.1.4 | ColumnadGenMuxPPhysPeerOneChassisIdRx | read-write | deprecated | This string is used to indicate the chassis name of the peer device connected to the Receive component of a bi-directional interface. It is recommended to use … |
| 1.3.6.1.4.1.664.5.70.26.6.1.1.5 | ColumnadGenMuxPPhysPeerOnePortIdTx | read-write | deprecated | This string is used to specify the port identification of the peer device connected to the Transmit component of a bi-directional interface. It is recommended … |
| 1.3.6.1.4.1.664.5.70.26.6.1.1.6 | ColumnadGenMuxPPhysPeerOnePortIdRx | read-write | deprecated | This string is used to specify the port identification of the peer device connected to the Receive component of a bi-directional interface. It is recommended t… |
| 1.3.6.1.4.1.664.5.70.26.6.1.1.7 | ColumnadGenMuxPPhysPeerTwoIpAddressTx | read-write | deprecated | This object is applicable only when two peer devices are connected to the interface using a Y-cable. This variable is used to indicate the IP address of the pe… |
| 1.3.6.1.4.1.664.5.70.26.6.1.1.8 | ColumnadGenMuxPPhysPeerTwoIpAddressRx | read-write | deprecated | This object is applicable only when two peer devices are connected to the interface using a Y-cable.This variable is used to indicate the IP address of the pee… |
| 1.3.6.1.4.1.664.5.70.26.6.1.1.9 | ColumnadGenMuxPPhysPeerTwoChassisIdTx | read-write | deprecated | This object is applicable only when two peer devices are connected to the interface using a Y-cable. This string is used to indicate the chassis name of the pe… |
| 1.3.6.1.4.1.664.5.70.26.6.1.1.10 | ColumnadGenMuxPPhysPeerTwoChassisIdRx | read-write | deprecated | This object is applicable only when two peer devices are connected to the interface using a Y-cable. This string is used to indicate the chassis name of the pe… |
| 1.3.6.1.4.1.664.5.70.26.6.1.1.11 | ColumnadGenMuxPPhysPeerTwoPortIdTx | read-write | deprecated | This object is applicable only when two peer devices are connected to the interface using a Y-cable. This string is used to specify the port identification of … |
| 1.3.6.1.4.1.664.5.70.26.6.1.1.12 | ColumnadGenMuxPPhysPeerTwoPortIdRx | read-write | deprecated | This object is applicable only when two peer devices are connected to the interface using a Y-cable. This string is used to specify the port identification of … |
| 1.3.6.1.4.1.664.5.70.26.7 | NodeadGenMuxPIfStatus | |||
| 1.3.6.1.4.1.664.5.70.26.7.1 | TableadGenMuxPIfStatusTable | not-accessible | current | The Muxponder Interface status table. |
| 1.3.6.1.4.1.664.5.70.26.7.1.1 | RowadGenMuxPIfStatusEntry | not-accessible | current | An entry in the Muxponder Interface status table. |
| 1.3.6.1.4.1.664.5.70.26.7.1.1.1 | ColumnadGenMuxPInterfacePortStatus | read-only | current | Port status. The bit positions are: 0 - this interface is in fault 1 - at least one superordinate interface or equipment is in fault 2 - at least one subordina… |
| 1.3.6.1.4.1.664.5.70.26.7.1.1.2 | ColumnadGenMuxPInterfacePortProtGrpName | read-only | current | The name of the protection group for this port. If this port is not part of a protection group, this field will be blank. |
| 1.3.6.1.4.1.664.5.70.26.8 | NodeadGenMuxPMappingProv | |||
| 1.3.6.1.4.1.664.5.70.26.8.1 | TableadGenMuxPMappingTable | not-accessible | current | The Muxponder Mapping table. |
| 1.3.6.1.4.1.664.5.70.26.8.1.1 | RowadGenMuxPMappingEntry | not-accessible | current | An entry in the Muxponder Mapping table. |
| 1.3.6.1.4.1.664.5.70.26.8.1.1.1 | ColumnadGenMuxPMappingName | not-accessible | current | Mapping name. |
| 1.3.6.1.4.1.664.5.70.26.8.1.1.2 | ColumnadGenMuxPMappingType | read-create | current | Mapping type. |
| 1.3.6.1.4.1.664.5.70.26.8.1.1.3 | ColumnadGenMuxPMappingDirection | read-create | current | Mapping direction. |
| 1.3.6.1.4.1.664.5.70.26.8.1.1.4 | ColumnadGenMuxPMappingSrcType | read-only | current | This is used to indicate the payload type of the source endpoint. |
| 1.3.6.1.4.1.664.5.70.26.8.1.1.5 | ColumnadGenMuxPMappingSrcInterface | read-create | current | The interface of the source endpoint. |
| 1.3.6.1.4.1.664.5.70.26.8.1.1.6 | ColumnadGenMuxPMappingDstType | read-create | current | This is used to indicate the payload type of the destination endpoint. |
| 1.3.6.1.4.1.664.5.70.26.8.1.1.7 | ColumnadGenMuxPMappingDstInterface | read-create | current | The interface of the destination endpoint. |
| 1.3.6.1.4.1.664.5.70.26.8.1.1.8 | ColumnadGenMuxPMappingRowStatus | read-create | current | Mapping Row Status. |
| 1.3.6.1.4.1.664.5.70.26.8.1.1.9 | ColumnadGenMuxPMappingLastProvError | read-only | current | This string describes the last error experienced for this particular entry in the table. |
| 1.3.6.1.4.1.664.5.70.26.8.1.1.10 | ColumnadGenMuxPMappingOperStatus | read-only | current | Operation Status of the Mapping. This operational status indicates whether or not the provisioning necessary for a mapping to function properly has been adequa… |
| 1.3.6.1.4.1.664.5.70.26.8.1.1.11 | ColumnadGenMuxPMappingStatusString | read-only | current | The status string for the mapping. Indicates why the mapping is down. If the mapping is up, then a blank string will be returned. |
| 1.3.6.1.4.1.664.5.70.26.8.2 | TableadGenMuxPMappingLastCreateErrorTable | not-accessible | current | The Muxponder Mapping last create error table. Table that indicates the last error that occurred during creation of a mapping. |
| 1.3.6.1.4.1.664.5.70.26.8.2.1 | RowadGenMuxPMappingLastCreateErrorEntry | not-accessible | current | An entry in the Muxponder Mapping Last Create Error table. |
| 1.3.6.1.4.1.664.5.70.26.8.2.1.1 | ColumnadGenMuxPMappingLastCreateError | read-only | current | The last error that occurred during the creation of a mapping. |
| 1.3.6.1.4.1.664.5.70.26.8.3 | TableadGenMuxPPortMappingStatusTable | not-accessible | current | The Muxponder Port Mapping Status table. |
| 1.3.6.1.4.1.664.5.70.26.8.3.1 | RowadGenMuxPPortMappingStatusEntry | not-accessible | current | An entry in the Muxponder Port Mapping Status table. |
| 1.3.6.1.4.1.664.5.70.26.8.3.1.1 | ColumnadGenMuxPPortMappingName | read-only | current | Mapping name. |
| 1.3.6.1.4.1.664.5.70.26.8.3.1.2 | ColumnadGenMuxPPortMappingStatus | read-only | current | This OID indicates whether this port is defined as a source, destination or both for this mapping. |
| 1.3.6.1.4.1.664.5.70.26.9 | NodeadGenMuxPMultiProtGroupProv | |||
| 1.3.6.1.4.1.664.5.70.26.9.1 | TableadGenMuxPMultiProtGroupTable | not-accessible | current | The Multi Protection Group table. This table is used to create multi protection groups. A multi-protection group defines a set of protection pairs in which the… |
| 1.3.6.1.4.1.664.5.70.26.9.1.1 | RowadGenMuxPMultiProtGroupEntry | not-accessible | current | An entry in the Multi Protection Group table. |
| 1.3.6.1.4.1.664.5.70.26.9.1.1.1 | ColumnadGenMuxPMultiProtGroupName | not-accessible | current | Multi Protection Group name. |
| 1.3.6.1.4.1.664.5.70.26.9.1.1.2 | ColumnadGenMuxPMultiProtGroupRowStatus | read-create | current | Multi Protection Group Row Status. |
| 1.3.6.1.4.1.664.5.70.26.9.1.1.3 | ColumnadGenMuxPMultiProtGroupLastProvError | read-only | current | This string describes the last error experienced for this particular entry in the table. |
| 1.3.6.1.4.1.664.5.70.26.9.1.1.4 | ColumnadGenMuxPMultiProtGroupOperStatus | read-only | current | Operational Status of the Multi Protection Group. This operational status indicates whether or not the provisioning necessary for protection switching to funct… |
| 1.3.6.1.4.1.664.5.70.26.9.1.1.5 | ColumnadGenMuxPMultiProtGroupStatusString | read-only | current | The status string for the multi protection group. Indicates why the protection group is down. If protection group is up, then a blank string will be returned. |
| 1.3.6.1.4.1.664.5.70.26.9.1.1.6 | ColumnadGenMuxPMultiProtGroupWorkIsOnline | read-only | current | Indicates whether or not the working-entity is online. If not, the protect-entity is online. |
| 1.3.6.1.4.1.664.5.70.26.9.1.1.7 | ColumnadGenMuxPMultiProtGroupSwitchCommands | read-create | current | Multi Protection Group Switch Commands. |
| 1.3.6.1.4.1.664.5.70.26.9.1.1.8 | ColumnadGenMuxPMultiProtGroupRevertiveEnable | read-create | current | Enables/disables revertive switching for this multi protection group. |
| 1.3.6.1.4.1.664.5.70.26.9.1.1.9 | ColumnadGenMuxPMultiProtGroupWaitToRestoreTime | read-create | current | Wait to restore time(in minutes). |
| 1.3.6.1.4.1.664.5.70.26.9.2 | TableadGenMuxPMultiProtGroupLastCreateErrorTable | not-accessible | current | The Multi Protection Group Last Create Error table. This table is used to indicate the last error that occurred during creation of a multi protection group. |
| 1.3.6.1.4.1.664.5.70.26.9.2.1 | RowadGenMuxPMultiProtGroupLastCreateErrorEntry | not-accessible | current | An entry in the Multi Protection Group Last Create Error table. |
| 1.3.6.1.4.1.664.5.70.26.9.2.1.1 | ColumnadGenMuxPMultiProtGroupLastCreateError | read-only | current | The last error that occurred during the creation of a protection group. |
| 1.3.6.1.4.1.664.5.70.26.9.3 | TableadGenMuxPMultiSonetProtPairTable | not-accessible | current | The Multi SONET Protection Pair table. This table is used to create multi protection pairs out of two SONET interfaces. |
| 1.3.6.1.4.1.664.5.70.26.9.3.1 | RowadGenMuxPMultiSonetProtPairEntry | not-accessible | current | An entry in the Multi SONET Protection Pair table. |
| 1.3.6.1.4.1.664.5.70.26.9.3.1.1 | ColumnadGenMuxPMultiSonetProtPairName | not-accessible | current | Multi SONET Protection Pair name. |
| 1.3.6.1.4.1.664.5.70.26.9.3.1.2 | ColumnadGenMuxPMultiSonetProtPairType | read-create | current | Multi SONET Protection Pair type. |
| 1.3.6.1.4.1.664.5.70.26.9.3.1.3 | ColumnadGenMuxPMultiSonetProtPairWorkingType | read-only | current | This is used to indicate the payload type of the working entity. |
| 1.3.6.1.4.1.664.5.70.26.9.3.1.4 | ColumnadGenMuxPMultiSonetProtPairWorkingIfIndex | read-create | current | The IfIndex of the working entity. |
| 1.3.6.1.4.1.664.5.70.26.9.3.1.5 | ColumnadGenMuxPMultiSonetProtPairProtectingType | read-only | current | This is used to indicate the payload type of the protecting entity. |
| 1.3.6.1.4.1.664.5.70.26.9.3.1.6 | ColumnadGenMuxPMultiSonetProtPairProtectingIfIndex | read-create | current | The IfIndex of the protecting entity. |
| 1.3.6.1.4.1.664.5.70.26.9.3.1.7 | ColumnadGenMuxPMultiSonetProtPairRowStatus | read-create | current | Protection Pair Row Status. |
| 1.3.6.1.4.1.664.5.70.26.9.3.1.8 | ColumnadGenMuxPMultiSonetProtPairLastProvError | read-only | current | This string describes the last error experienced for this particular entry in the table. |
| 1.3.6.1.4.1.664.5.70.26.9.3.1.9 | ColumnadGenMuxPMultiSonetProtPairWorkEntityStatus | read-only | current | Working Entity Signal Status. |
| 1.3.6.1.4.1.664.5.70.26.9.3.1.10 | ColumnadGenMuxPMultiSonetProtPairProtectEntityStatus | read-only | current | Protect Entity Signal Status. |
| 1.3.6.1.4.1.664.5.70.26.9.3.1.11 | ColumnadGenMuxPMultiSonetProtPairTxK1Request | read-only | current | Transmit K1 byte Request. |
| 1.3.6.1.4.1.664.5.70.26.9.3.1.12 | ColumnadGenMuxPMultiSonetProtPairTxK1RequestChannel | read-only | current | Transmit K1 byte Request Channel. |
| 1.3.6.1.4.1.664.5.70.26.9.3.1.13 | ColumnadGenMuxPMultiSonetProtPairTxK2BridgeChannel | read-only | current | Transmit K2 byte Bridge Channel. |
| 1.3.6.1.4.1.664.5.70.26.9.3.1.14 | ColumnadGenMuxPMultiSonetProtPairTxK2APSArchitecture | read-only | current | Transmit K2 byte APS Architecture. |
| 1.3.6.1.4.1.664.5.70.26.9.3.1.15 | ColumnadGenMuxPMultiSonetProtPairTxK2APSMode | read-only | current | Transmit K2 byte APS Mode. |
| 1.3.6.1.4.1.664.5.70.26.9.3.1.16 | ColumnadGenMuxPMultiSonetProtPairRxK1Request | read-only | current | Receive K1 byte Request. If notAvailable is returned, then the following OIDs are not valid: adGenMuxPSonetProtPairRxK1RequestChannel, adGenMuxPSonetProtPairRx… |
| 1.3.6.1.4.1.664.5.70.26.9.3.1.17 | ColumnadGenMuxPMultiSonetProtPairRxK1RequestChannel | read-only | current | Receive K1 byte Request Channel. |
| 1.3.6.1.4.1.664.5.70.26.9.3.1.18 | ColumnadGenMuxPMultiSonetProtPairRxK2BridgeChannel | read-only | current | Receive K2 byte Bridge Channel. |
| 1.3.6.1.4.1.664.5.70.26.9.3.1.19 | ColumnadGenMuxPMultiSonetProtPairRxK2APSArchitecture | read-only | current | Receive K2 byte APS Architecture. |
| 1.3.6.1.4.1.664.5.70.26.9.3.1.20 | ColumnadGenMuxPMultiSonetProtPairRxK2APSMode | read-only | current | Receive K2 byte APS Mode. |
| 1.3.6.1.4.1.664.5.70.26.9.3.1.21 | ColumnadGenMuxPMultiSonetProtPairOperStatus | read-only | current | Operational Status of the Protection Pair. This operational status indicates whether or not the provisioning necessary for protection switching to function pro… |
| 1.3.6.1.4.1.664.5.70.26.9.3.1.22 | ColumnadGenMuxPMultiSonetProtPairStatusString | read-only | current | The status string for the protection pair. Indicates why the protection pair is down. If protection pair is up, then a blank string will be returned. |
| 1.3.6.1.4.1.664.5.70.26.9.4 | TableadGenMuxPMultiSonetProtPairLastCreateErrorTable | not-accessible | current | The Multi SONET Protection Pair Last Create Error table. This table is used to indicate the last error that occurred during creation of a protection pair. |
| 1.3.6.1.4.1.664.5.70.26.9.4.1 | RowadGenMuxPMultiSonetProtPairLastCreateErrorEntry | not-accessible | current | An entry in the Multi SONET Protection Pair Last Create Error table. |
| 1.3.6.1.4.1.664.5.70.26.9.4.1.1 | ColumnadGenMuxPMultiSonetProtPairLastCreateError | read-only | current | The last error that occurred during the creation of a protection pair. |
| 1.3.6.1.4.1.664.5.70.26.9.5 | TableadGenMuxPMultiEthernetProtPairTable | not-accessible | current | The Multi Ethernet Protection Pair table. This table is used to create protection pairs between two Ethernet interfaces. |
| 1.3.6.1.4.1.664.5.70.26.9.5.1 | RowadGenMuxPMultiEthernetProtPairEntry | not-accessible | current | An entry in the Multi Ethernet Protection Pair table. |
| 1.3.6.1.4.1.664.5.70.26.9.5.1.1 | ColumnadGenMuxPMultiEthernetProtPairName | not-accessible | current | Multi Protection Pair name. |
| 1.3.6.1.4.1.664.5.70.26.9.5.1.2 | ColumnadGenMuxPMultiEthernetProtPairType | read-create | current | Multi Protection Pair type. |
| 1.3.6.1.4.1.664.5.70.26.9.5.1.3 | ColumnadGenMuxPMultiEthernetProtPairWorkingType | read-only | current | The payload type of the working entity. |
| 1.3.6.1.4.1.664.5.70.26.9.5.1.4 | ColumnadGenMuxPMultiEthernetProtPairWorkingIfIndex | read-create | current | The IfIndex of the working entity. |
| 1.3.6.1.4.1.664.5.70.26.9.5.1.5 | ColumnadGenMuxPMultiEthernetProtPairProtectingType | read-only | current | The payload type of the protecting entity. |
| 1.3.6.1.4.1.664.5.70.26.9.5.1.6 | ColumnadGenMuxPMultiEthernetProtPairProtectingIfIndex | read-create | current | The IfIndex of the protecting entity. |
| 1.3.6.1.4.1.664.5.70.26.9.5.1.7 | ColumnadGenMuxPMultiEthernetProtPairRowStatus | read-create | current | Multi Ethernet Protection Pair Row Status. |
| 1.3.6.1.4.1.664.5.70.26.9.5.1.8 | ColumnadGenMuxPMultiEthernetProtPairLastProvError | read-only | current | This string describes the last error experienced for this particular entry in the table. |
| 1.3.6.1.4.1.664.5.70.26.9.5.1.9 | ColumnadGenMuxPMultiEthernetProtPairOperStatus | read-only | current | Operational Status of the Multi Ethernet Protection Pair. This operational status indicates whether or not the provisioning necessary for protection switching … |
| 1.3.6.1.4.1.664.5.70.26.9.5.1.10 | ColumnadGenMuxPMultiEthernetProtPairStatusString | read-only | current | The status string for the protection pair. Indicates why the protection pair is down. If protection pair is up, then a blank string will be returned. |
| 1.3.6.1.4.1.664.5.70.26.9.5.1.11 | ColumnadGenMuxPMultiEthernetProtPairWorkEntityStatus | read-only | current | Working Entity Signal Status. |
| 1.3.6.1.4.1.664.5.70.26.9.5.1.12 | ColumnadGenMuxPMultiEthernetProtPairProtectEntityStatus | read-only | current | Protect Entity Signal Status. |
| 1.3.6.1.4.1.664.5.70.26.9.6 | TableadGenMuxPMultiEthernetProtPairLastCreateErrorTable | not-accessible | current | The Multi Ethernet Protection Pair Last Create Error table. This table is used to indicate the last error that occurred during creation of a protection pair. |
| 1.3.6.1.4.1.664.5.70.26.9.6.1 | RowadGenMuxPMultiEthernetProtPairLastCreateErrorEntry | not-accessible | current | An entry in the Multi Ethernet Protection Pair Last Create Error table. |
| 1.3.6.1.4.1.664.5.70.26.9.6.1.1 | ColumnadGenMuxPMultiEthernetProtPairLastCreateError | read-only | current | The last error that occurred during the creation of a protection pair. |
| 1.3.6.1.4.1.664.5.70.26.9.7 | TableadGenMuxPMultiFibreChannelProtPairTable | not-accessible | current | The Multi Ethernet Protection Pair table. This table is used to create protection pairs between two Fibre Channel interfaces. |
| 1.3.6.1.4.1.664.5.70.26.9.7.1 | RowadGenMuxPMultiFibreChannelProtPairEntry | not-accessible | current | An entry in the Multi Fibre Channel Protection Pair table. |
| 1.3.6.1.4.1.664.5.70.26.9.7.1.1 | ColumnadGenMuxPMultiFibreChannelProtPairName | not-accessible | current | Multi Protection Pair name. |
| 1.3.6.1.4.1.664.5.70.26.9.7.1.2 | ColumnadGenMuxPMultiFibreChannelProtPairType | read-create | current | Multi Protection Pair type. |
| 1.3.6.1.4.1.664.5.70.26.9.7.1.3 | ColumnadGenMuxPMultiFibreChannelProtPairWorkingType | read-only | current | The payload type of the working entity. |
| 1.3.6.1.4.1.664.5.70.26.9.7.1.4 | ColumnadGenMuxPMultiFibreChannelProtPairWorkingIfIndex | read-create | current | The IfIndex of the working entity. |
| 1.3.6.1.4.1.664.5.70.26.9.7.1.5 | ColumnadGenMuxPMultiFibreChannelProtPairProtectingType | read-only | current | The payload type of the protecting entity. |
| 1.3.6.1.4.1.664.5.70.26.9.7.1.6 | ColumnadGenMuxPMultiFibreChannelProtPairProtectingIfIndex | read-create | current | The IfIndex of the protecting entity. |
| 1.3.6.1.4.1.664.5.70.26.9.7.1.7 | ColumnadGenMuxPMultiFibreChannelProtPairRowStatus | read-create | current | Multi Fibre Channel Protection Pair Row Status. |
| 1.3.6.1.4.1.664.5.70.26.9.7.1.8 | ColumnadGenMuxPMultiFibreChannelProtPairLastProvError | read-only | current | This string describes the last error experienced for this particular entry in the table. |
| 1.3.6.1.4.1.664.5.70.26.9.7.1.9 | ColumnadGenMuxPMultiFibreChannelProtPairOperStatus | read-only | current | Operational Status of the Multi Fibre Channel Protection Pair. This operational status indicates whether or not the provisioning necessary for protection switc… |
| 1.3.6.1.4.1.664.5.70.26.9.7.1.10 | ColumnadGenMuxPMultiFibreChannelProtPairStatusString | read-only | current | The status string for the protection pair. Indicates why the protection pair is down. If protection pair is up, then a blank string will be returned. |
| 1.3.6.1.4.1.664.5.70.26.9.7.1.11 | ColumnadGenMuxPMultiFibreChannelProtPairWorkEntityStatus | read-only | current | Working Entity Signal Status. |
| 1.3.6.1.4.1.664.5.70.26.9.7.1.12 | ColumnadGenMuxPMultiFibreChannelProtPairProtectEntityStatus | read-only | current | Protect Entity Signal Status. |
| 1.3.6.1.4.1.664.5.70.26.9.8 | TableadGenMuxPMultiFibreChannelProtPairLastCreateErrorTable | not-accessible | current | The Multi Fibre Channel Protection Pair Last Create Error table. This table is used to indicate the last error that occurred during creation of a protection pa… |
| 1.3.6.1.4.1.664.5.70.26.9.8.1 | RowadGenMuxPMultiFibreChannelProtPairLastCreateErrorEntry | not-accessible | current | An entry in the Multi Fibre Channel Protection Pair Last Create Error table. |
| 1.3.6.1.4.1.664.5.70.26.9.8.1.1 | ColumnadGenMuxPMultiFibreChannelProtPairLastCreateError | read-only | current | The last error that occurred during the creation of a protection pair. |
| 1.3.6.1.4.1.664.5.70.26.100 | NodeadGenMuxPAlarm | |||
| 1.3.6.1.4.1.664.5.70.26.100.0 | NodeadGenMuxPAlarmEvents | |||
| 1.3.6.1.4.1.664.5.70.26.100.0.1 | NotificationadGenMuxPLFDClear | current | Indicates thatLoss of Frame Delineation Alarm is cleared. | |
| 1.3.6.1.4.1.664.5.70.26.100.0.2 | NotificationadGenMuxPLFDSet | current | Indicates that Loss of Frame Delineation Alarm is set. | |
| 1.3.6.1.4.1.664.5.70.26.100.0.3 | NotificationadGenMuxPUPMClear | current | Indicates that wrong GFP mapping(OPU2/ OTU2) of 8G/10G fibre channel is cleared. | |
| 1.3.6.1.4.1.664.5.70.26.100.0.4 | NotificationadGenMuxPUPMSet | current | Indicates that wrong GFP mapping(OPU2/ OTU2) of 8G/10G fibre channel is detected. | |
| 1.3.6.1.4.1.664.6.10000.70.26.1 | IdentityadGenMuxponderIdentity | This MIB defines the objects for the Muxponder MIB. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| EthernetPayloadTypes | INTEGER { notCompatible(1), gigabitEthernet(2), tenGigabitEthernet(3) } | current | Possible payload types for Ethernet. |
| FibreChanPayloadTypes | INTEGER { notCompatible(1), fibreChannel1G(2), fibreChannel2G(3), fibreChannel4G(4), fibreChannel8G(5), fibreChannel10G(6) } | current | Possible payload types for Fibre Channel. |
| MuxPMapInterface | OCTET STRING (SIZE (10)) | current | An octet string used to uniquely identify a mappable interface. A value of zero indicates that there isn't any encapsulation at that level. The Octet string is defined as follows: OCTET Position Represented Num Range Ba… |
| MuxPPayloadTypes | INTEGER { notApplicable(1), sts1(2), sts3c(3), sts12c(4), sts48c(5), sts192c(6), sonetLine(7), vc3(8), vc4(9), vc4x4c(10), vc4x16c(11), vc4x64c(12), sdhLine(13), otnPort(14), odu4(15), odu3(16), odu3e1(17), odu3e2(18), odu2(19), odu2e(20), odu2f(21), odu1e(22), odu1f(23), odu1(24), odu0(25), oduflex(26), timeslot(27), gigabitEthernet(28), tenGigabitEthernet(29), fibreChannel1G(30), fibreChannel2G(31), fibreChannel4G(32), fibreChannel8G(33), fibreChannel10G(34) } | current | Possible payload types for muxponders. |