ADTRAN-TAeSCUEXT1-MIB
87 objects
This MIB defines the objects for the adtranTAeScuMib MIB.
Imported Objects
| ADTRAN-GENSLOT-MIB | adGenSlotInfoIndex adGenSlotProdName |
| ADTRAN-GENTRAPINFORM-MIB | adTrapInformSeqNum |
| ADTRAN-TAeSCU-MIB | adTAeSCUmg adTAeSCUmgNotificationEvents adTAeSCUNetworkMgmt adTAeSCUSecAccountUserID |
| ADTRAN-TC | AdPresence |
| SNMPv2-MIB | sysName |
| SNMPv2-SMI | IMPORTS OBJECT-TYPE Integer32 MODULE-IDENTITY NOTIFICATION-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.664.1.241.0.24125 | NotificationadTAeSCUCtrpBlownFuse | current | Blown Fuse Alarm is active on module | |
| 1.3.6.1.4.1.664.1.241.0.24126 | NotificationadTAeSCUCtrpCardInserted | current | A card has been inserted into the chassis. Optional unlisted varbind VARIABLES: adGenSlotProdName indicate the card name that was removed. Only certain version… | |
| 1.3.6.1.4.1.664.1.241.0.24127 | NotificationadTAeSCUCtrpCardRemoved | current | A card has been removed from the chassis Optional unlisted varbind VARIABLES: adGenSlotProdName indicate the card name that was removed. Only certain versions … | |
| 1.3.6.1.4.1.664.1.241.0.24128 | NotificationadTAeSCUCtrpRmtAlmClear | current | Remote Input Alarm clear | |
| 1.3.6.1.4.1.664.1.241.0.24129 | NotificationadTAeSCUCtrpRmtAlm | current | Remote Input Alarm active | |
| 1.3.6.1.4.1.664.1.241.0.24130 | NotificationadTAeSCUCtrpExt1AlmClear | current | External Input #1 Alarm clear | |
| 1.3.6.1.4.1.664.1.241.0.24131 | NotificationadTAeSCUCtrpExt1Alm | current | External Input #1 Alarm active | |
| 1.3.6.1.4.1.664.1.241.0.24132 | NotificationadTAeSCUCtrpExt2AlmClear | current | External Input #2 Alarm clear | |
| 1.3.6.1.4.1.664.1.241.0.24133 | NotificationadTAeSCUCtrpExt2Alm | current | External Input #2 Alarm active | |
| 1.3.6.1.4.1.664.1.241.0.24134 | NotificationadTAeSCUCtrpBusApwrAlmClear | current | Bus A Power Failure Alarm clear | |
| 1.3.6.1.4.1.664.1.241.0.24135 | NotificationadTAeSCUCtrpBusApowerAlm | current | Bus A Power Failure Alarm active | |
| 1.3.6.1.4.1.664.1.241.0.24136 | NotificationadTAeSCUCtrpBusBpwrAlmClear | current | Bus B Power Failure Alarm clear | |
| 1.3.6.1.4.1.664.1.241.0.24137 | NotificationadTAeSCUCtrpBusBpowerAlm | current | Bus B Power Failure Alarm active | |
| 1.3.6.1.4.1.664.1.241.0.24138 | NotificationadTAeSCUCardCommRestored | current | Communication with a card has been restored | |
| 1.3.6.1.4.1.664.1.241.0.24139 | NotificationadTAeSCUCardCommFail | current | Communication with a card has failed | |
| 1.3.6.1.4.1.664.1.241.0.24164 | NotificationadTAeSCUCraftLoginClear | current | Craft Login Clear. User Loged Out. | |
| 1.3.6.1.4.1.664.1.241.0.24165 | NotificationadTAeSCUCraftLoginNotfication | current | Craft Login notification. | |
| 1.3.6.1.4.1.664.1.241.0.24168 | NotificationadTASysCtrlInvalidControllerClear | current | An invalid controller alarm cleared. | |
| 1.3.6.1.4.1.664.1.241.0.24169 | NotificationadTASysCtrlInvalidController | current | An invalid controller module has been installed. | |
| 1.3.6.1.4.1.664.1.241.0.24170 | NotificationadTASysModuleRestart | current | The module has restarted. | |
| 1.3.6.1.4.1.664.2.241.6.20 | NodeadTaIPServicePortProvMgmt | |||
| 1.3.6.1.4.1.664.2.241.6.20.1 | ScalaradTaTL1TelnetPortNumber | read-write | current | TL1 Telnet port number. |
| 1.3.6.1.4.1.664.2.241.6.20.3 | ScalaradTaTL1RawTCPPortNumber | read-write | current | TL1 Raw-TCP port number. |
| 1.3.6.1.4.1.664.2.241.6.20.5 | ScalaradTaSecondaryTelnetPortNumber | read-write | current | Secondary Telnet port number. |
| 1.3.6.1.4.1.664.2.241.6.20.6 | ScalaradTaNtwkTerminalTelnetPortNumber | read-write | current | Ntwk Terminal Server Telnet Port. |
| 1.3.6.1.4.1.664.2.241.6.20.7 | ScalaradTaAdminTerminalTelnetPortNumber | read-write | current | Admin Terminal Server Telnet Port. |
| 1.3.6.1.4.1.664.2.241.6.20.8 | ScalaradTaCraftTerminalTelnetPortNumber | read-write | current | Craft Terminal Server Telnet Port. |
| 1.3.6.1.4.1.664.2.241.6.20.9 | ScalaradTaTL1SSHPortNumber | read-write | current | TL1 SSH Port. |
| 1.3.6.1.4.1.664.2.241.6.20.10 | ScalaradTaSecondarySSHPortNumber | read-write | current | Seconday SSH Port. |
| 1.3.6.1.4.1.664.2.241.6.20.11 | ScalaradTaCLITelnetPortNumber | read-write | current | CLI Telnet Port. |
| 1.3.6.1.4.1.664.2.241.6.20.12 | ScalaradTaCLISSHPortNumber | read-write | current | CLI SSH Port. |
| 1.3.6.1.4.1.664.2.241.6.20.13 | ScalaradTaSFTPPortNumber | read-write | current | SFTP Port to connect to. |
| 1.3.6.1.4.1.664.2.241.6.20.17 | ScalaradTaTelnetDeadClientDetection | read-write | current | Telnet Dead Client Detection. |
| 1.3.6.1.4.1.664.2.241.6.20.19 | ScalaradTaRFC1122TCPDeadClientDetection | read-write | current | RFC1122 TCP Dead Client Detection. |
| 1.3.6.1.4.1.664.2.241.6.22 | NodeadTaIPAccessPortMgmt | |||
| 1.3.6.1.4.1.664.2.241.6.22.5 | ScalaradTaSnmpIPAccess | read-write | current | Set SNMP IP port Access mode. Enable(1) - Enable SNMP IP port access. Disable(2) - Disable SNMP IP port access. SSHTunnelOnly(3) - Enabled SNMP Server IP port … |
| 1.3.6.1.4.1.664.2.241.6.22.7 | ScalaradTaTL1IPAccess | read-write | current | Set TL1 IP port Access mode. Enable(1) - Enable TL1 IP port access. Disable(2) - Disable TL1 IP port access. SSHTunnelOnly(3) - Enabled Terminal Server IP port… |
| 1.3.6.1.4.1.664.2.241.6.22.9 | ScalaradTaMenuIPAccess | read-write | current | Set Menu Server IP port Access mode. Enable(1) - Enable Menu Server IP port access. Disable(2) - Disable Menu Server IP port access. SSHTunnelOnly(3) - Enabled… |
| 1.3.6.1.4.1.664.2.241.6.22.11 | ScalaradTaTerminalServerIPAccess | read-write | current | Set Terminal Server IP port Access mode. Enable(1) - Enable Terminal Server IP Access port. Disable(2) - Disable Terminal Server IP Access port. SSHTunnelOnly(… |
| 1.3.6.1.4.1.664.2.241.6.22.13 | ScalaradTaSSHIPAccess | read-write | current | Enable or disable SSH IP port 22. Enable(1) - Enable SSH IP port 22. Disable(2) - Disable SSH IP port 22. |
| 1.3.6.1.4.1.664.2.241.6.22.15 | ScalaradTaSSHIPTunnelsAccess | read-write | current | Enable or disable SSH Tunnels Access. Enable(1) - Enable SSH Tunnels access. Disable(2) - Disabled SSH Tunnels access. |
| 1.3.6.1.4.1.664.2.241.6.22.17 | ScalaradTaCLIIPAccess | read-write | current | Set CLI IP port Access mode. Enable(1) - Enable CLI IP port access. Disable(2) - Disable CLI IP port access. SSHTunnelOnly(3) - Enabled Terminal Server IP port… |
| 1.3.6.1.4.1.664.2.241.6.22.18 | ScalaradTaHTTPIPAccess | read-write | current | Set HTTP IP port Access mode. Enable(1) - Enable HTTP IP port access. Disable(2) - Disable HTTP IP port access. |
| 1.3.6.1.4.1.664.2.241.6.22.19 | ScalaradTaHTTPSIPAccess | read-write | current | Set HTTPS IP port Access mode. Enable(1) - Enable HTTPS IP port access. Disable(2) - Disable HTTPS IP port access. |
| 1.3.6.1.4.1.664.2.241.6.24 | NodeadTAeSCUAdminPort | |||
| 1.3.6.1.4.1.664.2.241.6.24.1 | ScalaradTAeSCUAdminPortMode | read-write | current | Admin port communication mode. |
| 1.3.6.1.4.1.664.2.241.6.24.2 | ScalaradTAeSCUAdminPortModeOpti | read-write | current | Admin port communication mode for systems that do NOT support tl1TestAccess. |
| 1.3.6.1.4.1.664.2.241.6.24.3 | ScalaradTAeSCUAdminPortUseRtsCts | read-write | current | When enabled the controller will use the RS-232 Request To Send (RTS) and Clear To Send (CTS) signals for Admin port communication. |
| 1.3.6.1.4.1.664.2.241.6.24.4 | ScalaradTAeSCUAdminPortCarrierLoss | read-write | current | When enabled the controller will terminate the menu session on the loss of the RS-232 Data Carrier Detect (DCD) signal for Admin port communication. |
| 1.3.6.1.4.1.664.2.241.6.24.5 | ScalaradTAeSCUAdminPortDtrLogout | read-write | current | When enabled the controller will De-assert/Drop the RS-232 Data Terminal Ready (DTR) signal on menu logouts for Admin port communications. |
| 1.3.6.1.4.1.664.2.241.16 | NodeadTAeSCUMuxModuleProv | |||
| 1.3.6.1.4.1.664.2.241.16.7 | NodeadTAeSCUWriteModuleProvisioning | |||
| 1.3.6.1.4.1.664.2.241.16.7.1 | ScalaradTAeSCUProvisioningSource | read-write | current | This is the source slot number. This is the slot that will be copied to the destination slots. A value of zero means no slot is set. adGenESCUmoduleAutoProv an… |
| 1.3.6.1.4.1.664.2.241.16.7.3 | ScalaradTAeSCUProvDestinationSlots | read-write | current | Destination slots to copy to. A valid destination slot must be compatible with the source slot. Copy provisioning will be ignored if the slots are not compatib… |
| 1.3.6.1.4.1.664.2.241.16.7.4 | ScalaradTAeSCUWriteProvInitiate | read-write | current | Command to initiate write copy provisioning. |
| 1.3.6.1.4.1.664.2.241.16.7.5 | TableadTAeSCUWriteProvStatusTable | not-accessible | current | Copy provision status table |
| 1.3.6.1.4.1.664.2.241.16.7.5.1 | RowadTAeSCUWriteProvStatusTableEntry | not-accessible | current | An entry in the Copy provision status table table. |
| 1.3.6.1.4.1.664.2.241.16.7.5.1.1 | ColumnadTAeSCUWriteProvInitiateStatus | read-only | current | Status of adTAeSCUWriteProvInitiate command. Busy(slot #,command_time),Details... Idle Complete; SUCCESS..... (Details) Complete; ERROR: ...... (Details) |
| 1.3.6.1.4.1.664.2.241.18 | NodeadTAeSCUUserDefinableAlarm | |||
| 1.3.6.1.4.1.664.2.241.18.3 | ScalaradTAeSCUAccModuleRemovedLevel | read-write | current | Access Module Removed Alarm Level. |
| 1.3.6.1.4.1.664.2.241.18.4 | ScalaradTAeSCUCraftLoginAlarmLevel | read-write | current | Alarm Level for the adTAeSCUCraftLoginNotfication. |
| 1.3.6.1.4.1.664.2.241.18.5 | ScalaradTAeSCUMUXRemovedLevel | read-write | current | MUX Removed Alarm Level. |
| 1.3.6.1.4.1.664.2.241.18.6 | ScalaradTAeSCUTrapAlarmLevel | read-only | current | Alarm Level of a trap. This value is invalid if read. This will be used as a varbind in a trap to indicate its alarm level. |
| 1.3.6.1.4.1.664.2.241.18.7 | TableadTAeSCUenvAlarmsTable | not-accessible | current | The enhanced System Controller Unit Environmental alarm table |
| 1.3.6.1.4.1.664.2.241.18.7.1 | RowadTAeSCUenvAlarmsTableEntry | not-accessible | current | An entry in the Controller Unit Environmental alarm table. |
| 1.3.6.1.4.1.664.2.241.18.7.1.1 | ColumnadTAeSCUAalarmIndex | read-only | current | Alarm Index. |
| 1.3.6.1.4.1.664.2.241.18.7.1.2 | ColumnadTAeSCUenvAlarmDefaultName | read-only | current | Default alarm name. |
| 1.3.6.1.4.1.664.2.241.18.7.1.3 | ColumnadTAeSCUenvAlarmUserName | read-write | current | A user specified name. adTAeSCUenvAlarmDefaultName or a user provided name. Index 4 '-48V Bus A Input' read-only. Index 5 '-48V Bus B Input' is read-only. Inde… |
| 1.3.6.1.4.1.664.2.241.18.7.1.4 | ColumnadTAeSCUenvAlarmInputLevel | read-write | current | Alarm level. |
| 1.3.6.1.4.1.664.2.241.18.7.1.5 | ColumnadTAeSCUAIDIndex | read-write | current | AID Index. |
| 1.3.6.1.4.1.664.2.241.18.7.1.6 | ColumnadTAeSCUConditionCode | read-write | current | Condition code. |
| 1.3.6.1.4.1.664.2.241.20 | NodeadTAeSCUAlarmMg | |||
| 1.3.6.1.4.1.664.2.241.20.1 | ScalaradTAeSCUAlarmEnable | read-write | current | A bit encoded string representing the enabled/disabled status of all alarms for the eSCU. The bits are defined in network order, that is, most significant bit … |
| 1.3.6.1.4.1.664.2.241.20.5 | ScalaradTAeSCUResendAllSnmpTraps | read-write | current | resendAllSnmpUnconfirmedTrapsv(1) - Resend all unconfirmed SNMP traps in SNMP trap Chache. See adTrapInformCache (1.3.6.1.4.1.664.5.16.2.1.1.7) getResponse(2) … |
| 1.3.6.1.4.1.664.2.241.22 | NodeadGenSlotExtension | |||
| 1.3.6.1.4.1.664.2.241.22.1 | ScalaradGenSlotInfoStateSaveNVRAM | read-write | current | Enable or disable saving the adGenSlotInfoState in NV RAM. |
| 1.3.6.1.4.1.664.2.241.22.3 | TableadGenSlotInfoScuExtTable | not-accessible | current | Table of slots available for boards. |
| 1.3.6.1.4.1.664.2.241.22.3.1 | RowadGenSlotInfoScuExtEntry | not-accessible | current | |
| 1.3.6.1.4.1.664.2.241.22.3.1.1 | ColumnadGenSlotInfoStateExtension | read-write | current | Allows forcing slot with adGenSlotInfoState of virtual state to empty. adGenSlotInfoStateExtension will only accept a value Empty(2). If a card is present but … |
| 1.3.6.1.4.1.664.2.241.24 | NodeadTAeFileTransferMgmt | |||
| 1.3.6.1.4.1.664.2.241.24.5 | ScalaradTAeSCUFileTransferMethod | read-write | current | File transfer method to use to transfer files to and from the controller. ftmTFTP(1) indicates TFTP transfer protocol. ftmFTOT(2) indicates FTOT transfer proto… |
| 1.3.6.1.4.1.664.2.241.24.10 | ScalaradTAeSCUFileTransferUserID | read-write | current | Specifies the contents of the User ID field for file transfer protocols that require it, such as FTP. |
| 1.3.6.1.4.1.664.2.241.24.11 | ScalaradTAeSCUFileTransferPassword | read-write | current | Specifies the contents of the password field for file transfer protocols that require it, such as FTP. |
| 1.3.6.1.4.1.664.2.241.24.12 | ScalaradTAeSCUFileTransferFirmwarePath | read-write | current | Specifies an optional path preceding the firmware filename for file transfer protocols that may need it, such as FTOT and FTP. |
| 1.3.6.1.4.1.664.2.241.24.13 | ScalaradTAeSCUFileTransferReceiveStatus | read-only | current | Status of the most recent remote file get/read/receive operation. |
| 1.3.6.1.4.1.664.2.241.24.14 | ScalaradTAeSCUFileTransferSendStatus | read-only | current | Status of the most recent remote file put/write/send operation. |
| 1.3.6.1.4.1.664.2.241.241 | IdentityadtranTAeSCUExt1MIB | This MIB defines the objects for the adtranTAeScuMib MIB. |