This object is a set of ethernet port LED indicators. Format is as follow: + | Total Port | Port1 |....| PortN | | Number | LED Status | | LED Status | + 1octets 2octets Total Port Number(1 octet): indicates the number of following port LED status. Port LED Status(2 octets): indicates one ethernet port LED's status, format is as below: + | Color | LED lighting | | bits | mode | + 15 4 3 0 Bit0 to bit3 indicates the mode of LED lighting. 0x0 means this LED is not supported. 0x1 means LED is off. 0x2 means LED is fixed lighting. 0x3 indicates LED is blinking. 0x4 indicates LED is alternating lighting between more than one color. Colors are determined by color bits. 0x5-0xF are reserved. Bit4 to bit15 are color bits,they indicate the LED's specific color. If a color bit is set, it stands for corresponding color. Only when LED lighting mode is alternating lighting(low nibble is 0x4), multi-bit can be set. bit4 - green bit bit5 - amber bit bit6 - red bit bit7-bit15 are reserved. Each LED Status corresponds to one port, all ethernet port LEDs' status are arranged from lowest number port to high.