This object is used to configure the transmit rate for unicast traffic for the wireless interface. This object is dependent on the transmit rates supported by the wireless interface (refer to MIB object - oriWirelessIfAllowedSupportedDataRates and dot11PHYType). The values of this object are given in units of 500 kbps. A value of zero (0) is interpreted as auto fallback. Examples for configuring this object: - 802.11b PHY (DSSS - 2.4 GHz) - 0 = Auto Fallback - 2 = 1 Mbps - 4 = 2 Mbps - 11 = 5.5 Mbps - 22 = 11 Mbps - 802.11a PHY (OFDM - 5 GHz) - 0 = Auto Fallback - 12 = 6 Mbps - 18 = 9 Mbps - 24 = 12 Mbps - 36 = 18 Mbps - 48 = 24 Mbps - 72 = 36 Mbps - 96 = 48 Mbps - 108 = 54 Mbps - 802.11a PHY (OFDM - 5 GHz) with Turbo Mode Enabled - 0 = Auto Fallback - 24 = 12 Mbps - 36 = 18 Mbps - 48 = 24 Mbps - 72 = 36 Mbps - 96 = 48 Mbps - 144 = 72 Mbps - 192 = 96 Mbps - 216 = 108 Mbps - 802.11g PHY (ERP) in 802.11g only mode - 0 = Auto Fallback - 12 = 6 Mbps - 18 = 9 Mbps - 24 = 12 Mbps - 36 = 18 Mbps - 48 = 24 Mbps - 72 = 36 Mbps - 96 = 48 Mbps - 108 = 54 Mbps - 802.11g PHY (ERP) in 802.11b/g mode - 0 = Auto Fallback - 2 = 1 Mbps - 4 = 2 Mbps - 11 = 5.5 Mbps - 12 = 6 Mbps - 18 = 9 Mbps - 22 = 11 Mbps - 24 = 12 Mbps - 36 = 18 Mbps - 48 = 24 Mbps - 72 = 36 Mbps - 96 = 48 Mbps - 108 = 54 Mbps The default value for this object should be zero (0) auto fallback.