Destination of the packets received on this interface. Possible values: X.25 PVC: Port:LCN X.25 SVC: X.25 Addr or 'cid' followed by a predefined Call ID number. Frame Relay: Port:DLCI HDLC: 'H' followed by the HDLC Port Number SLIP: 'S' followed by the SLIP Channel Number Ethernet: 'E' followed by the Ethernet Port Number PPP: 'P' followed by the PPP Port Number. Bundles(for PPP)'B' followed by the PPP Bundle Number. No destination: None Default : None Examples: 1. For SLIP destination which is Link no. 1, the destination will be S100 (100 instead of 1 is for Async). 2. For SLIP destination of APS-8, channel no. 8: S8 3. For PPP destination of APS-8, Sync Link no. 1: P1 4. For PPP destination of APS-8, Async channel on link 1: P100 Note for PPP: PPP protocol is allowed to be applied on Sync Links (1-3) as well as Async channels (1-24). In the ascii terminal: If the user writes P1 for example the device has to check which P1 it is. Is it the async channel 1 or Link no. 1. The device does NOT ALLOW configuring PPP on both Sync Link no. 1 and async RJ45 channel 1. When P1 is entered by the user, the protocols on async channel 1 and sync link 1 are checked. As only one of them is PPP, it will apply to the only PPP chan/link.