RAD-SONET-MIB
8498 objects
RAD MIB.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.164 | Identityrad | RAD MIB. | ||
| 1.3.6.1.4.1.164.1 | NoderadTokenRing | |||
| 1.3.6.1.4.1.164.1.1 | NodetrGen | |||
| 1.3.6.1.4.1.164.1.1.1 | NodeagnRR | |||
| 1.3.6.1.4.1.164.1.1.1.1 | ScalaragnRRcoprocHwVersion | read-write | current | ASCII string for description and display of the CML\IB hardware version. If the entry is not applicable, it will display the string -NOT APPLICABLE- |
| 1.3.6.1.4.1.164.1.1.1.2 | ScalaragnRRrecMode | read-write | current | The manager station can assist the agent in the autorecovery process by setting this value to SLOW(1). This value indicates the presence of old modules within … |
| 1.3.6.1.4.1.164.1.1.1.3 | ScalaragnRRmaskIBMalrt | read-write | current | When this object is set to the value of Enabled(3), Agent-traps that are not masked will also be sent to the IBM LAN manager using IBM's Alert Transport Servic… |
| 1.3.6.1.4.1.164.1.1.1.4 | ScalaragnRRResetConfig | read-write | current | Setting the value to ON(3)is interpreted as a reset command for the agent NV Ram. When reset process is ended, a trap will be issued. If the entry is not appli… |
| 1.3.6.1.4.1.164.1.1.1.5 | ScalaragnRRSwReset | read-write | deprecated | Setting the value to ON(3)is interpreted as a software reset command for the agent. When reset process is ended, a trap will be issued. |
| 1.3.6.1.4.1.164.1.1.1.6 | ScalaragnRRRingReportMngr | read-write | deprecated | Setting the value to ON(3) is interpreted as assigning the duty of Ring Report Manager on the agent |
| 1.3.6.1.4.1.164.1.1.1.7 | ScalaragnRRSubSysCommState | read-only | current | This attribute indicates the status of communication between the two agent's processors. The communication is failed when the CML/NM card is removed |
| 1.3.6.1.4.1.164.1.1.2 | NoderingTR | |||
| 1.3.6.1.4.1.164.1.1.2.1 | ScalarringResetStatistics | read-write | current | Setting the value of this attribute to ON(3) resets all the inband statistics and error counters. |
| 1.3.6.1.4.1.164.1.1.2.2 | ScalarringCurrentTraffic | read-only | current | Momentary traffic for the last time interval. The traffic is expressed in percents of the maximum Tokenring traffic . |
| 1.3.6.1.4.1.164.1.1.2.3 | ScalarringPeakTraffic | read-only | current | Maximal traffic value since last reset of Agent or statistics. Expressed in percents of the maximum Tokenring traffic. |
| 1.3.6.1.4.1.164.1.1.2.4 | ScalarringTrafficTreshold | read-write | current | Traffic threshold value. When reached, a trap will be sent to the management console. Expressed in percents of the maximum Tokenring traffic |
| 1.3.6.1.4.1.164.1.1.2.5 | ScalarringLineErrCnt | read-only | current | This counter is incremented when a frame or token is copied or repeated by any of the stations on the ring, the E bit is zero in the frame or token and one of … |
| 1.3.6.1.4.1.164.1.1.2.6 | ScalarringLineErr | read-only | current | This counter is incremented when a frame or token is copied or repeated by any of the stations on the ring, the E bit is zero in the frame or token and one of … |
| 1.3.6.1.4.1.164.1.1.2.7 | ScalarringBurstErrCnt | read-only | current | This counter is incremented when any of the stations on the ring detects the absence of transitions for five half-bit timers (burst-five error). |
| 1.3.6.1.4.1.164.1.1.2.8 | ScalarringBurstErr | read-only | current | This counter is incremented when any of the stations on the ring detects the absence of transitions for five half-bit timers (burst-five error). |
| 1.3.6.1.4.1.164.1.1.2.9 | ScalarringACFCErrCnt | read-only | current | This counter is incremented when any of the stations on the ring receives an AMP or SMP frame in which A is equal to C is equal to 0, and then receives another… |
| 1.3.6.1.4.1.164.1.1.2.10 | ScalarringACFCErr | read-only | current | This counter is incremented when any of the stations on the ring receives an AMP or SMP frame in which A is equal to C is equal to 0, and then receives another… |
| 1.3.6.1.4.1.164.1.1.2.11 | ScalarringTotErrCnt | read-only | current | The total of the above described errors |
| 1.3.6.1.4.1.164.1.1.2.12 | ScalarringTotErr | read-only | current | The total of the above described errors |
| 1.3.6.1.4.1.164.1.1.2.13 | ScalarringTotErrThreshold | read-write | current | The threshold value of the total of the above described errors.When the threshold is reached a trap indicating the status of the ring (SOFT ERROR)will be sent … |
| 1.3.6.1.4.1.164.1.1.2.14 | ScalarringStatus | read-only | current | Describes the status of the LAN segment the agent is attached to: Normal(2) - The LAN segment is operating normally SoftError(3) - The Token ring LAN segment (… |
| 1.3.6.1.4.1.164.1.1.2.15 | ScalarringConfigMsg | read-only | current | Full configuration message coded in internal RAD application format. This entry describes ring information. |
| 1.3.6.1.4.1.164.1.1.2.16 | ScalarringCurrentTrafficCnt | read-only | current | Momentary traffic for the last time interval. The traffic is expressed as bits per second. |
| 1.3.6.1.4.1.164.1.1.3 | NodesegTR | |||
| 1.3.6.1.4.1.164.1.1.3.1 | TablesegTRTable | not-accessible | current | Segments. |
| 1.3.6.1.4.1.164.1.1.3.1.1 | RowsegTREntry | not-accessible | current | An entry in table segTRTable. |
| 1.3.6.1.4.1.164.1.1.3.1.1.1 | ColumnsegTRID | read-only | current | Segment unique identification number (internal). It is the extreme left slot, marking the beginning of the segment. |
| 1.3.6.1.4.1.164.1.1.3.1.1.2 | ColumnsegTRLastSlot | read-only | current | Location of the right most slot marking the end of the segment. In the RADring hub it is slot number 20 or the slot where end of segment module is inserted or … |
| 1.3.6.1.4.1.164.1.1.3.1.1.3 | ColumnsegTRFirstSlot | read-only | current | Location of the left most slot marking the beginning of the segment. In the RADring hub it is slot number 1 or the slot number following the end of segment mod… |
| 1.3.6.1.4.1.164.1.1.3.1.1.4 | ColumnsegTRStatus | read-only | current | Describes the status of the segment : Normal(3) - The segment is operating normally Beaconing(2) - The ring is not operative; no data is transmitted. Segment w… |
| 1.3.6.1.4.1.164.1.1.4 | NodemoduleTR | |||
| 1.3.6.1.4.1.164.1.1.4.1 | TablemdlTRTable | not-accessible | current | Modules parameters structure contains general information about the modules. |
| 1.3.6.1.4.1.164.1.1.4.1.1 | RowmdlTREntry | not-accessible | current | An entry in table mdlTRTable. |
| 1.3.6.1.4.1.164.1.1.4.1.1.1 | ColumnmdlTRID | read-only | current | The slot number where the module is inserted. Can not be greater than chNoSlot |
| 1.3.6.1.4.1.164.1.1.4.1.1.2 | ColumnmdlTRSegID | read-only | current | The segment number where the module belongs to. One of the segTRID values. |
| 1.3.6.1.4.1.164.1.1.4.1.1.3 | ColumnmdlTRType | read-only | deprecated | Indicates the type of the module connected at the specified slot number. |
| 1.3.6.1.4.1.164.1.1.4.1.1.4 | ColumnmdlTRHwVer | read-write | current | ASCII string for description and display of the module's hardware version, as it is known by the module's software. A manager can record his own hardware upgra… |
| 1.3.6.1.4.1.164.1.1.4.1.1.5 | ColumnmdlTRSwVer | read-only | current | ASCII string for description and display of the module's software version. A value of NOT APPLICABLE will be recorded for module having no independent processo… |
| 1.3.6.1.4.1.164.1.1.4.1.1.6 | ColumnmdlTRTotalNoOfPrt | read-only | current | This entry describes the number of possible ports/lobes/links connection in the module (not all ports hardware should be active) . |
| 1.3.6.1.4.1.164.1.1.4.1.1.7 | ColumnmdlTRSpecific | read-only | current | Object identifier of entity containing additional information regarding this instance. This entry is type specific. |
| 1.3.6.1.4.1.164.1.1.5 | NodeprtTR | |||
| 1.3.6.1.4.1.164.1.1.5.1 | TableprtTRTable | not-accessible | current | TReral port table for any media type. |
| 1.3.6.1.4.1.164.1.1.5.1.1 | RowprtTREntry | not-accessible | current | An entry in table prtTRTable. |
| 1.3.6.1.4.1.164.1.1.5.1.1.1 | ColumnprtTRModuleID | read-only | current | A unique identifier of the module(slot no.)this port is attached to. |
| 1.3.6.1.4.1.164.1.1.5.1.1.2 | ColumnprtTRID | read-only | current | A unique identifier of the port within its module. |
| 1.3.6.1.4.1.164.1.1.5.1.1.3 | ColumnprtTRFunctionality | read-only | current | Describes the functionality of the port in a Token ring topology or other implementations. |
| 1.3.6.1.4.1.164.1.1.5.1.1.4 | ColumnprtTRConnectorType | read-only | current | Type of hardware connector in the port. |
| 1.3.6.1.4.1.164.1.1.5.1.1.5 | ColumnprtTRAdminCmd | read-write | current | By setting this attribute to DISABLE(2) or SHORT(4) the management station can force this lobe/port/link-connection to be removed and block any access to the n… |
| 1.3.6.1.4.1.164.1.1.5.1.1.6 | ColumnprtTRActiveState | read-only | current | This attribute describes the electrical or optical activity state of a lobe or the state of a port. Certain values may not be applicable in some cases |
| 1.3.6.1.4.1.164.1.1.5.1.1.7 | ColumnprtTRTrapMaskEnable | read-write | current | When this attribute is set to OFF by the management console the agent starts sending the unmasked traps related to this port. Otherwise no traps from this port… |
| 1.3.6.1.4.1.164.1.1.5.1.1.8 | ColumnprtTRstatus | read-only | current | This attribute indicates the status of this lobe/port connection: DISABLED - (2) to (6) indicates the reason for the disabled state. INSERTED - (7)indicates th… |
| 1.3.6.1.4.1.164.1.1.5.1.1.9 | ColumnprtTRCableProtectEnable | read-only | current | The value of this attribute determines activation of the cable-fault protection mechanism of TCR and the optical link mechanism of TFR and TFC . |
| 1.3.6.1.4.1.164.1.1.5.1.1.10 | ColumnprtTRCableState | read-only | current | The value of this attribute determines the cable status of TCR and the optical link mechanism of TFR and TFC . |
| 1.3.6.1.4.1.164.1.1.5.1.1.11 | ColumnprtTRMACAddress | read-only | current | The value of this object is the specific MAC address of this interface which uniquely identifies this Interface on a ring. |
| 1.3.6.1.4.1.164.1.1.5.1.1.12 | ColumnprtTRSpecific | read-only | current | Object identifier of entity containing additional information regarding this instance. This entry is type specific. |
| 1.3.6.1.4.1.164.1.1.5.2 | TableprtTRMacAddressTable | not-accessible | current | . |
| 1.3.6.1.4.1.164.1.1.5.2.1 | RowprtTRMacAddressEntry | not-accessible | current | An entry in table prtTRMacAddressTable. |
| 1.3.6.1.4.1.164.1.1.5.2.1.1 | ColumnprtTRMacAddressModuleID | read-only | current | A unique identifier of the module(slot no.)this port is attached to. |
| 1.3.6.1.4.1.164.1.1.5.2.1.2 | ColumnprtTRMacAddressPortID | read-only | current | A unique identifier of the port within its module. |
| 1.3.6.1.4.1.164.1.1.5.2.1.3 | ColumnprtTRMacAddressID | read-only | current | A identifier of the MAC address in the list according to the ring order |
| 1.3.6.1.4.1.164.1.1.5.2.1.4 | ColumnprtTRMACAddressValue | read-only | current | MAC address from the list of addresses connected to this port |
| 1.3.6.1.4.1.164.1.2 | NoderadRing | |||
| 1.3.6.1.4.1.164.1.2.1 | NodechasRR | |||
| 1.3.6.1.4.1.164.1.2.1.1 | ScalarchType | read-write | current | This value indicates which type of enclosure the Rad agent is managing. The default value will be RadRing |
| 1.3.6.1.4.1.164.1.2.1.2 | ScalarchNoSlot | read-only | current | This value indicates the number of manageable slots in the chassis. Not all slots must be occupied. |
| 1.3.6.1.4.1.164.1.2.1.3 | ScalarchPSPrimary | read-only | current | This attribute indicates the status of the main (primary) power supply unit |
| 1.3.6.1.4.1.164.1.2.1.4 | ScalarchPSSecondary | read-only | current | This attribute indicates the status of the secondary power supply unit |
| 1.3.6.1.4.1.164.1.2.1.5 | ScalarchTemperature | read-only | current | This attribute indicates if the internal hub temperature exceeded the permissible maximum |
| 1.3.6.1.4.1.164.1.2.1.6 | ScalarchEtMainClock | read-only | current | This attribute indicates the status of Eternet repeater main clock in RadRingII hub |
| 1.3.6.1.4.1.164.1.2.1.7 | ScalarchEtSecClock | read-only | current | This attribute indicates the status of Eternet repeater secondary clock in RadRingII hub |
| 1.3.6.1.4.1.164.1.2.2 | NodesegRR | |||
| 1.3.6.1.4.1.164.1.2.2.1 | TablesegRRSecurityTable | not-accessible | current | RADRing segments' specific information |
| 1.3.6.1.4.1.164.1.2.2.1.1 | RowsegRRSecEntry | not-accessible | current | An entry in table segRRSecurityTable. |
| 1.3.6.1.4.1.164.1.2.2.1.1.1 | ColumnsegRRID | read-only | current | Segment unique identification number (internal). It is the extreme left slot, marking the beginning of the segment. TR segment no.: 1 .. 20 Ethernet segment no… |
| 1.3.6.1.4.1.164.1.2.2.1.1.2 | ColumnsegRRSecID | read-only | current | Segment's security unique identification number |
| 1.3.6.1.4.1.164.1.2.2.1.1.3 | ColumnsegRRSecEnable | read-write | current | This entry indicates whether the specific segment's security is active or not |
| 1.3.6.1.4.1.164.1.2.2.1.1.4 | ColumnsegRRSecurityPattern | read-write | current | A six-octet (48 bit) pattern, where the masked bits of segTRSecurityMask need to match the MAC address of each port within the segment. A Value of all-zeros in… |
| 1.3.6.1.4.1.164.1.2.2.1.1.5 | ColumnsegRRSecurityMask | read-write | current | Mask of the allowed MAC address that can be connected through the ports within the segment |
| 1.3.6.1.4.1.164.1.2.3 | NodemoduleRR | |||
| 1.3.6.1.4.1.164.1.2.3.1 | TablemdlRRTable | not-accessible | current | RADRing specific modules' information |
| 1.3.6.1.4.1.164.1.2.3.1.1 | RowmdlRREntry | not-accessible | current | An entry in table mdlRRTable. |
| 1.3.6.1.4.1.164.1.2.3.1.1.1 | ColumnmdlRRid | read-only | current | Unique number to identify the module. It indicates the slot number the module is inserted in. |
| 1.3.6.1.4.1.164.1.2.3.1.1.2 | ColumnmdlRRTLRstatus | read-only | current | This entry specifies the status of the setup on the TL-2/Exx modules. When the value is ON, lobe one is the only active lobe. This entry will have the value UN… |
| 1.3.6.1.4.1.164.1.2.3.1.1.3 | ColumnmdlRRtermination | read-only | current | Attribute describing the termination state as set by the switches on the lobe modules |
| 1.3.6.1.4.1.164.1.2.3.1.1.4 | ColumnmdlRRReset | read-write | current | When this object is set to the value of ON(3), the module performs software reset. Upon completion, a trap will be issued to the management station and the val… |
| 1.3.6.1.4.1.164.1.2.3.1.1.5 | ColumnmdlRRLed | read-only | current | This entry specifies the LEDs status in the module . Each led will be represented by 4 bits where the first 2 bits will specify the status (NA, OFF, ON, BLINK)… |
| 1.3.6.1.4.1.164.1.2.3.1.1.6 | ColumnmdlRRSpeed | read-only | current | Attribute describing the bandwidth of the media as set by the module switches. |
| 1.3.6.1.4.1.164.1.2.3.1.1.7 | ColumnmdlRRMngAutoDis | read-only | obsolete | Attribute describing the setup of the MNG switch on the TL- Active cards. Value ON indicates the ability of activating the auto-disable mechanism of the card v… |
| 1.3.6.1.4.1.164.1.2.3.1.1.8 | ColumnmdlRRAutodisable | read-write | current | This attribute can be set by the manager if the value of mdlRRMngAutoDis is ON. It controls the behavior of the Active cards regarding the Auto-disable mechani… |
| 1.3.6.1.4.1.164.1.2.3.1.1.9 | ColumnmdlRRConfigMsg | read-only | current | Full configuration message coded in internal RAD application format. This entry describes module' configuration. |
| 1.3.6.1.4.1.164.1.2.3.1.1.10 | ColumnmdlRRMngState | read-only | current | This entry indicates the setting of the module's switches. ENABLE means that the module can accept management commands. |
| 1.3.6.1.4.1.164.1.2.3.1.1.11 | ColumnmdlRRType | read-only | current | Indicates the type of the module installed in the specified slot number. |
| 1.3.6.1.4.1.164.1.2.3.1.1.12 | ColumnmdlRRHwVer | read-write | current | ASCII string for description and display of the module's hardware version, as it is known by the module's software. A manager can record his own hardware upgra… |
| 1.3.6.1.4.1.164.1.2.3.1.1.13 | ColumnmdlRRSwVer | read-only | current | ASCII string for description and display of the module's software version. A value of NOT APPLICABLE will be recorded for a module having no independent proces… |
| 1.3.6.1.4.1.164.1.2.3.1.1.14 | ColumnmdlRRSpecific | read-only | current | Object identifier of entity containing additional information regarding this instance. This entry is module type specific. |
| 1.3.6.1.4.1.164.1.2.3.2 | TablemdlIBTable | not-accessible | current | Additional parameters that can be monitored for a segment with an inband module. Module specific for Token Ring |
| 1.3.6.1.4.1.164.1.2.3.2.1 | RowmdlIBEntry | not-accessible | current | An entry in table mdlIBTable. |
| 1.3.6.1.4.1.164.1.2.3.2.1.1 | ColumnmdlIBid | read-only | current | Unique number to identify the CML\IB module. It indicates the slot number the module is inserted in |
| 1.3.6.1.4.1.164.1.2.3.2.1.2 | ColumnmdlIBsegID | read-only | current | Unique number to identify the segment where the CML\IB module is inserted. It is one of the segTRID values. |
| 1.3.6.1.4.1.164.1.2.3.2.1.3 | ColumnmdlIBCorrelationEnable | read-write | current | When set to ON(3), the in-band agent should perform correlation each time a station enters/leaves the segment. |
| 1.3.6.1.4.1.164.1.2.3.2.1.4 | ColumnmdlIBAutorecEnable | read-write | current | When set to ON(3), the in-band agent should perform autorecovery each time a beacon status is detected. |
| 1.3.6.1.4.1.164.1.2.3.2.1.5 | ColumnmdlIBAutorecResult | read-only | current | When autorecovery is completed the result will be reported (3)..(7). While in autorecovery process, started(2) will be reported. Before autorecovery process, n… |
| 1.3.6.1.4.1.164.1.2.3.2.1.6 | ColumnmdlIBcommand | read-write | current | When this object is set to the value of open(2), the station should go into the open state. The progress and success of this command is given by the values of … |
| 1.3.6.1.4.1.164.1.2.3.2.1.7 | ColumnmdlIBstate | read-only | current | The current adapter status, which can be used to diagnose fluctuating problems. |
| 1.3.6.1.4.1.164.1.2.3.2.1.8 | ColumnmdlIBagnt | read-only | current | Indicates whether the specific inband module serves as: - Active hub agent - (on) - Ring Monitor (for TR module only) - (off) - Standby agent - (standBy) |
| 1.3.6.1.4.1.164.1.2.3.2.1.9 | ColumnmdlIBIpAddress | read-only | current | Indicates IP address of the module if the module serves as an agent of itself. |
| 1.3.6.1.4.1.164.1.2.3.2.1.10 | ColumnmdlIBLocalMacAddr | read-write | current | The value of this object is the specific MAC address of this interface which uniquely identifies this interface on a ring.It is the address set by the manageme… |
| 1.3.6.1.4.1.164.1.2.3.2.1.11 | ColumnmdlIBLocalAddrStatus | read-write | current | The value of this object specifies whether the specific MAC address of this interface was set by the local management or it is the burn-in address in use. |
| 1.3.6.1.4.1.164.1.2.3.2.1.12 | ColumnmdlIBbrnInMacAddr | read-only | current | The value of this object is the specific Burn-in MAC address of this interface which uniquely identifies this interface on a ring. Non-canonical format. |
| 1.3.6.1.4.1.164.1.2.3.2.1.13 | ColumnmdlIBTrapMaskEnable | read-write | current | When this attribute is set to OFF by the management console, the agent starts sending the unmasked traps related to this module. Otherwise, no traps are sent b… |
| 1.3.6.1.4.1.164.1.2.3.3 | TablemdlBRGTable | not-accessible | current | Special modules such as bridges/converters that are within the hub |
| 1.3.6.1.4.1.164.1.2.3.3.1 | RowmdlBRGEntry | not-accessible | current | An entry in table mdlBRGTable. |
| 1.3.6.1.4.1.164.1.2.3.3.1.1 | ColumnmdlBRGid | read-only | current | Unique number to identify the module. It indicates the slot number the module is inserted in. |
| 1.3.6.1.4.1.164.1.2.3.3.1.2 | ColumnmdlBRGReady | read-only | current | This entry will have the value ON when packets can be transferred in the TRE module. The value UNKNOWN will be used for all other modules where this characteri… |
| 1.3.6.1.4.1.164.1.2.3.3.1.3 | ColumnmdlBRGStatus | read-only | current | This entry specifies the status of operation of the STC or FTC modules. For other modules this value will read NOAP |
| 1.3.6.1.4.1.164.1.2.3.3.1.4 | ColumnmdlBRGLocation | read-only | current | This entry indicates the configuration mode: - for the TRE bridge (main/remote) - for MLB-T, MLBT-F (main/secondary) |
| 1.3.6.1.4.1.164.1.2.3.3.1.5 | ColumnmdlBRGIpAddress | read-only | current | Indicates IP address of the module if the module serves as an agent of itself. For all other modules the IP value will be 0.0.0.0 |
| 1.3.6.1.4.1.164.1.2.3.3.1.6 | ColumnmdlBRGMacAddr | read-only | current | The value of this object is the specific MAC address of this interface which uniquely identifies this interface on a ring. |
| 1.3.6.1.4.1.164.1.2.3.3.1.7 | ColumnmdlBRGAdapterState | read-only | current | The current adapter status, which can be used to diagnose fluctuating problems. This object is applicable only for TR bridges with adapter. The value 'unknown'… |
| 1.3.6.1.4.1.164.1.2.3.3.1.8 | ColumnmdlBRGBypassSw | read-only | current | This entry is applicable only for FTB-D/FO module. It describes the status of the Bypass Switch. The value UNKNOWN will be used for all other modules where thi… |
| 1.3.6.1.4.1.164.1.2.3.4 | TablemdlMMTable | not-accessible | current | Special 'WAN' modules that are within the RadRing hub |
| 1.3.6.1.4.1.164.1.2.3.4.1 | RowmdlMMEntry | not-accessible | current | An entry in table mdlMMTable. |
| 1.3.6.1.4.1.164.1.2.3.4.1.1 | ColumnmdlMMid | read-only | current | Unique number to identify the module. It indicates the slot number the module is inserted in. |
| 1.3.6.1.4.1.164.1.2.3.4.1.2 | ColumnmdlMMBertCmd | read-write | current | Setting this Object to ON, will start BERT test on all the channels that are currently in Remote Loop. If the value of mdlRRMngState is disabled, this paramete… |
| 1.3.6.1.4.1.164.1.2.3.5 | TablemdlETTable | not-accessible | current | 'Ethernet' modules that are within the hub |
| 1.3.6.1.4.1.164.1.2.3.5.1 | RowmdlETEntry | not-accessible | current | An entry in table mdlETTable. |
| 1.3.6.1.4.1.164.1.2.3.5.1.1 | ColumnmdlETid | read-only | current | Unique number to identify the module. It indicates the slot number the module is inserted in. It is the same as rptrGroupIndex in the Repeater MIB |
| 1.3.6.1.4.1.164.1.2.3.5.1.2 | ColumnmdlETSAmode | read-write | current | Setting this Object to ON, will change the mode of operation of the Ethernet card to a stand alone operation mode. It will disconnect the card from the repeate… |
| 1.3.6.1.4.1.164.1.2.4 | NodeprtRR | |||
| 1.3.6.1.4.1.164.1.2.4.1 | TableprtRRTable | not-accessible | current | RADRing specific port information |
| 1.3.6.1.4.1.164.1.2.4.1.1 | RowprtRREntry | not-accessible | current | An entry in table prtRRTable. |
| 1.3.6.1.4.1.164.1.2.4.1.1.1 | ColumnprtRRmdlID | read-only | current | A unique identifier of the module,(slot no.),this port is attached to. |
| 1.3.6.1.4.1.164.1.2.4.1.1.2 | ColumnprtRRID | read-only | current | A unique identifier of the port within its module. |
| 1.3.6.1.4.1.164.1.2.4.1.1.3 | ColumnprtRRSecurityState | read-only | current | This entry indicates whether a security check can be performed on the specific port. This value is directly related to the presence of an inband module in the … |
| 1.3.6.1.4.1.164.1.2.4.1.1.4 | ColumnprtRRSecurityEnable | read-write | current | This value indicates whether a security check should be performed. Setting this value to ON(3) will activate the security mechanism if and only if, the value o… |
| 1.3.6.1.4.1.164.1.2.4.1.1.5 | ColumnprtRRSecurityMask | read-write | current | Mask of the allowed MAC address that can be connected through this port. The security of the individual port overwrites the security of the segment where the p… |
| 1.3.6.1.4.1.164.1.2.4.1.1.6 | ColumnprtRRSecurityPattern | read-write | current | A six-octet(48 bit) pattern, where the masked bits of prtRRSecurityMask should match the MAC address. |
| 1.3.6.1.4.1.164.1.2.4.1.1.7 | ColumnprtRRJitterAttenEnable | read-write | current | The value of this attribute determines activation of the jitters Attenuation mechanism of repeater's port . |
| 1.3.6.1.4.1.164.1.2.4.1.1.8 | ColumnprtRRConfigMsg | read-only | current | Full configuration message coded in internal RAD application format. This entry describes port' configuration. |
| 1.3.6.1.4.1.164.1.2.4.1.1.9 | ColumnprtRRFlipAutoDisable | read-write | current | Attribute describing the control on the flipping mechanism of a lobe . Value ON indicates the ability of the lobe to auto disable itself when flipping occur. V… |
| 1.3.6.1.4.1.164.1.2.4.1.1.10 | ColumnprtRRSecurityMask2 | read-write | current | Mask of the allowed MAC address that can be connected through this port. The security of the individual port overwrites the security of the segment where the p… |
| 1.3.6.1.4.1.164.1.2.4.1.1.11 | ColumnprtRRSecurityPattern2 | read-write | current | A six-octet(48 bit) pattern: where the masked bits of prtRRSecurityMask2 should match the MAC address. |
| 1.3.6.1.4.1.164.1.2.4.1.1.12 | ColumnprtRRMode | read-write | current | Indicates the port status of rr-sat card after the communication is broken. When configured to smart-port, the port disables itself when there is no management… |
| 1.3.6.1.4.1.164.1.2.4.1.1.13 | ColumnprtRRAttachment | read-only | current | Indicates the type of the port attachment. Smart attachment types are applicable for rr-sat card only |
| 1.3.6.1.4.1.164.1.2.4.2 | TableprtMMTable | not-accessible | current | RADRing specific WAN modules port information. |
| 1.3.6.1.4.1.164.1.2.4.2.1 | RowprtMMEntry | not-accessible | current | An entry in table prtMMTable. |
| 1.3.6.1.4.1.164.1.2.4.2.1.1 | ColumnprtMMmdlID | read-only | current | A unique identifier of the module(slot no.)this port is attached to. |
| 1.3.6.1.4.1.164.1.2.4.2.1.2 | ColumnprtMMID | read-only | current | A unique identifier of the port (link) within its module. |
| 1.3.6.1.4.1.164.1.2.4.2.1.3 | ColumnprtMMAdminCmd | read-write | current | Setting the object to locLoop(2) or remLoop(3) will activate the corresponding test. Value remLoop(3) activates the BERT test on the related link if mdlMMBertC… |
| 1.3.6.1.4.1.164.1.2.4.2.1.4 | ColumnprtMMOperStatus | read-only | current | Reflects the Synchronization status. |
| 1.3.6.1.4.1.164.1.2.4.2.1.5 | ColumnprtMMTestStatus | read-only | current | Reflects the link status. When the object is set to the value of bert(4), it means that the remote loopback is active too. |
| 1.3.6.1.4.1.164.1.2.4.2.1.6 | ColumnprtMMBertResult | read-only | current | The value of this object indicates the status of the last BERT test. |
| 1.3.6.1.4.1.164.1.2.4.2.1.7 | ColumnprtMMTrapMaskEnable | read-write | current | When this object is set to OFF by the management console, the agent starts sending the unmasked traps related to this module. Otherwise, no traps are sent by t… |
| 1.3.6.1.4.1.164.1.2.4.3 | TableprtETTable | not-accessible | current | RADRing specific Ethernet port information |
| 1.3.6.1.4.1.164.1.2.4.3.1 | RowprtETEntry | not-accessible | current | An entry in table prtETTable. |
| 1.3.6.1.4.1.164.1.2.4.3.1.1 | ColumnprtETmdlID | read-only | current | A unique identifier of the module, (slot no.), this port is attached to. |
| 1.3.6.1.4.1.164.1.2.4.3.1.2 | ColumnprtETID | read-only | current | A unique identifier of the port within its module. |
| 1.3.6.1.4.1.164.1.2.4.3.1.3 | ColumnprtETTrapMaskEnable | read-write | current | When this attribute is set to OFF by the management console, the agent starts sending the unmasked traps related to this port. Otherwise, no traps are sent by … |
| 1.3.6.1.4.1.164.1.2.4.4 | TableprtRRSecTable | not-accessible | current | RR Port Security Table (10.08.95) |
| 1.3.6.1.4.1.164.1.2.4.4.1 | RowprtRRSecEntry | not-accessible | current | An entry in table prtRRSecTable. |
| 1.3.6.1.4.1.164.1.2.4.4.1.1 | ColumnprtRRSecmdlID | read-only | current | A unique identifier of the module,(slot no.),this port is attached to. |
| 1.3.6.1.4.1.164.1.2.4.4.1.2 | ColumnprtRRSecPrtID | read-only | current | A unique identifier of the port within its module. |
| 1.3.6.1.4.1.164.1.2.4.4.1.3 | ColumnprtRRSecID | read-only | current | A unique identifier of the security number within the port. |
| 1.3.6.1.4.1.164.1.2.4.4.1.4 | ColumnprtRRSecMask | read-write | current | Mask of the allowed MAC address that can be connected through this port. The security of the individual port overwrites the security of the segment, the port b… |
| 1.3.6.1.4.1.164.1.2.4.4.1.5 | ColumnprtRRSecPattern | read-write | current | A six-octet(48 bit) pattern, where the masked bits of prtRRSecMask should match the MAC address. |
| 1.3.6.1.4.1.164.2 | NoderadFddi | |||
| 1.3.6.1.4.1.164.2.1 | NoderadFddiStation | |||
| 1.3.6.1.4.1.164.2.1.1 | ScalarradFddiStationsNumber | read-only | current | The number of manageable Stations implemented in the box. |
| 1.3.6.1.4.1.164.2.1.2 | TableradFddiStationTable | not-accessible | current | A list of FddiStation entries. The number of entries is given by the value of radFddiStationsNumber. |
| 1.3.6.1.4.1.164.2.1.2.1 | RowradFddiStationEntry | not-accessible | current | An entry in table radFddiStationTable. |
| 1.3.6.1.4.1.164.2.1.2.1.1 | ColumnradFddiStationIndex | read-only | current | A unique value for each Station. Its value ranges between 1 and the value ofradFddiStationNumber. |
| 1.3.6.1.4.1.164.2.1.2.1.2 | ColumnradFddiStationType | read-only | current | Indicates the type of the station. |
| 1.3.6.1.4.1.164.2.1.2.1.3 | ColumnradFddiStationBus1TestResult | read-only | current | Indicates the result of a test performed on Bus1. |
| 1.3.6.1.4.1.164.2.1.2.1.4 | ColumnradFddiStationBus2TestResult | read-only | current | Indicates the result of a test performed on Bus2. |
| 1.3.6.1.4.1.164.2.1.2.1.5 | ColumnradFddiStationTempDeInsertAction | read-write | current | This action provides temporary deinsertion of the root station from the ring. Expressed in milliseconds. |
| 1.3.6.1.4.1.164.2.1.2.1.6 | ColumnradFddiStationPerformTest | read-write | current | A value ON of this attribute indicates that a test should be performed upon the Station. |
| 1.3.6.1.4.1.164.2.1.2.1.7 | ColumnradFddiStationOpticalSwitchStatus | read-only | current | A value ON of this attribute indicates that the Station is in bypass mode. |
| 1.3.6.1.4.1.164.2.2 | TableradFddiSMTTable | not-accessible | current | A list of FddiSMT entries. The number of entries is given by the value of snmpFddiSMTNumber. |
| 1.3.6.1.4.1.164.2.2.1 | RowradFddiSMTEntry | not-accessible | current | An entry in table radFddiSMTTable. |
| 1.3.6.1.4.1.164.2.2.1.1 | ColumnradFddiSMTIndex | read-only | current | A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. |
| 1.3.6.1.4.1.164.2.2.1.2 | ColumnradFddiSMTStation | read-only | current | Indicates the Station inside the box to which the current SMT belongs. Its value ranges between 1 and the value of radFddiStationNumber. |
| 1.3.6.1.4.1.164.2.2.1.3 | ColumnradFddiSMTCFState | read-only | obsolete | The attachement configuration for the Station. Extends the range of values provided by the SNMP variable snmpFddiSMTCFState from the SNMP FDDI MIB. |
| 1.3.6.1.4.1.164.2.2.1.4 | ColumnradFddiSMTLeftSlot | read-only | current | Indicates the slot number of the leftmost card on the concentrator implemented inside the box and managed by the agent MAC. |
| 1.3.6.1.4.1.164.2.2.1.5 | ColumnradFddiSMTRightSlot | read-only | current | Indicates the slot number of the rightmost card on the concentrator implemented inside the box and managed by the agent MAC. Note that the MAC-agent card itsel… |
| 1.3.6.1.4.1.164.2.3 | TableradFddiMACTable | not-accessible | current | A list of FddiMAC entries. The number of entries is given by the value of snmpFddiMACNumber. |
| 1.3.6.1.4.1.164.2.3.1 | RowradFddiMACEntry | not-accessible | current | An entry in table radFddiMACTable. |
| 1.3.6.1.4.1.164.2.3.1.1 | ColumnradFddiMACSMTIndex | read-only | current | The value of the SMT index associated with this MAC. |
| 1.3.6.1.4.1.164.2.3.1.2 | ColumnradFddiMACIndex | read-only | current | A unique value for each MAC. Its value ranges between 1 and the value of snmpFddiMACNumber. |
| 1.3.6.1.4.1.164.2.3.1.3 | ColumnradFddiMACStation | read-only | current | Indicates the Station inside the box to which the current MAC belongs. Its value ranges between 1 and the value of radFddiStationNumber. |
| 1.3.6.1.4.1.164.2.3.1.4 | ColumnradFddiMACTestResult | read-only | current | Indicates the result of a test performed on MAC. The value is a sum. It takes the value 0 if the result of the test is OK and if faults occur, 2 raised to a po… |
| 1.3.6.1.4.1.164.2.3.1.5 | ColumnradFddiMACTokenCt | read-only | current | Token Counts - Refer to ANSI MAC {73}. |
| 1.3.6.1.4.1.164.2.3.1.6 | ColumnradFddiMACRingLoad | read-only | current | Current traffic value. The traffic is expressed in percents of the maximum FDDI traffic in the range 1..20, expressed on a log(10) scale ( value = 10*log10(per… |
| 1.3.6.1.4.1.164.2.3.1.7 | ColumnradFddiMACRingLoadBuffer | read-only | current | Record of traffic for the last second with a resolution of 100 msec. The traffic is expressed in percents of the maximum FDDI traffic and each record contains … |
| 1.3.6.1.4.1.164.2.3.1.8 | ColumnradFddiMACRingLoadTrsh | read-write | current | Traffic threshold value. When exceeded, a trap is send to the management console. Expressed in percents of the maximum FDDI traffic, in the range 1..20, expres… |
| 1.3.6.1.4.1.164.2.3.1.9 | ColumnradFddiMACRingLoadPeak | read-only | current | Maximal traffic value since last reset of hub or relay. Expressed in per- cents of the maximum FDDI traffic, in the range 1..20, expressed on log(10) scale. |
| 1.3.6.1.4.1.164.2.3.1.10 | ColumnradFddiMACDownstreamNbr | read-only | current | The MAC's downstream neighbor's long individual MAC address. The value shall be reported as '00 00 00 00 00 00' if it is unknown. |
| 1.3.6.1.4.1.164.2.3.1.11 | ColumnradFddiMACRingStatus | read-only | current | Attribute which summs the status of the ring controlled by the current MAC. |
| 1.3.6.1.4.1.164.2.3.1.12 | ColumnradFddiMACRingUtilization | read-only | current | Current traffic value. The traffic is expressed in percents of the maximum FDDI traffic. |
| 1.3.6.1.4.1.164.2.3.1.13 | ColumnradFddiMACRingPeakUtilization | read-only | current | Peak traffic value since las reset of the hub or relay. The traffic is expressed in percents of the maximum FDDI traffic. |
| 1.3.6.1.4.1.164.2.4 | TableradFddiGroupTable | not-accessible | current | A list of FddiGroup entries. The number of entries is given by the value of snmpFddiGroupNumber. |
| 1.3.6.1.4.1.164.2.4.1 | RowradFddiGroupEntry | not-accessible | current | An entry in table radFddiGroupTable. |
| 1.3.6.1.4.1.164.2.4.1.1 | ColumnradFddiGroupId | read-only | current | Unique ID of the group in radFddiGroupTable. Equivalent to slot number in enclosures. |
| 1.3.6.1.4.1.164.2.4.1.2 | ColumnradFddiGroupRedundancy | read-write | current | This attribute shows the usage of the A/B pair of ports in Tree mode. If the redundancy conditions are not fulfilled, value none(1) will be returned. If backup… |
| 1.3.6.1.4.1.164.2.4.1.3 | ColumnradFddiGroupTopologyMode | read-only | current | Defines the topology mode of the FDDI PHY card. |
| 1.3.6.1.4.1.164.2.4.1.4 | ColumnradFddiGroupTestResult | read-only | current | Result of test performed upon an FDDI group. A value of faulty (1) indicates a CPU or communication at module level. |
| 1.3.6.1.4.1.164.2.4.1.5 | ColumnradFddiGroupConfigStatus | read-only | current | Indicates the configuration status of the module (group). |
| 1.3.6.1.4.1.164.2.4.1.6 | ColumnradFddiGroupAutoRightLoop | read-only | current | Value ON of this attribute signifies that a hardware loop was automatically created on a FDDI module which does not sense the existence of another FDDI group o… |
| 1.3.6.1.4.1.164.2.4.1.7 | ColumnradFddiGroupAutoLeftLoop | read-only | current | Value ON of this attribute signifies that a hardware loop was automatically created on a FDDI module which does not sense the existence of another FDDI group o… |
| 1.3.6.1.4.1.164.2.4.1.8 | ColumnradFddiGroupManRightLoop | read-write | current | Setting this attribute to ON signifies a command to the hardware to create a loop on the FDDI module which isolates the ring from the right hand side. |
| 1.3.6.1.4.1.164.2.4.1.9 | ColumnradFddiGroupManLeftLoop | read-write | current | Setting this attribute to ON signifies a command to the hardware to create a loop on the FDDI module which isolates the ring from the left hand side. |
| 1.3.6.1.4.1.164.2.4.1.10 | ColumnradFddiGroupOpticalSwitchStatus | read-only | current | This attribute describes the presence of the optical switch and for existing optical switches describes the possibility of auto-reconfiguration of path resourc… |
| 1.3.6.1.4.1.164.2.5 | TableradFddiPortTable | not-accessible | current | . |
| 1.3.6.1.4.1.164.2.5.1 | RowradFddiPortEntry | not-accessible | current | An entry in table radFddiPortTable. |
| 1.3.6.1.4.1.164.2.5.1.1 | ColumnradFddiPortGroupID | read-only | current | ID of group to which the FDDI card belongs. |
| 1.3.6.1.4.1.164.2.5.1.2 | ColumnradFddiPortID | read-only | current | Unique Id of the port in the radFddiPortEntry. |
| 1.3.6.1.4.1.164.2.5.1.4 | ColumnradFddiPortTestResult | read-only | current | Indicates the result of a test performed on a port. |
| 1.3.6.1.4.1.164.2.5.1.5 | ColumnradFddiPortNumberOfConnectedStations | read-only | current | Number of stations connected to the port. |
| 1.3.6.1.4.1.164.2.5.1.6 | ColumnradFddiPortConnectedStations | read-only | current | This attribute displays the configuration of the stations connected to the port.The FDDI addresses of the stations are displayed in ring order, starting with t… |
| 1.3.6.1.4.1.164.2.5.1.8 | ColumnradFddiPortCurrentPath | read-write | obsolete | Current Path in FDDI port on PHY cards. |
| 1.3.6.1.4.1.164.2.5.1.9 | ColumnradFddiPortFunctionalStatus | read-write | current | Fubctional status of the port according to value of link error estimate relative to thresholds of alarm and cutoff. |
| 1.3.6.1.4.1.164.2.6 | NoderadFddiAgn | |||
| 1.3.6.1.4.1.164.2.6.1 | ScalarradFddiAgnPriSwDesc | read-only | current | ASCII string for description and display of the Fddi agent software version. |
| 1.3.6.1.4.1.164.3 | NoderadWan | |||
| 1.3.6.1.4.1.164.3.1 | NodewanGen | |||
| 1.3.6.1.4.1.164.3.1.1 | NodechasWanGen | |||
| 1.3.6.1.4.1.164.3.1.1.1 | ScalarchasVersion | read-only | current | An ASCII string for description and display of the agent chassis version. |
| 1.3.6.1.4.1.164.3.1.1.2 | ScalarchasTotalNoOfSlt | read-only | current | This entry indicates the number of physical slots in the chassis. |
| 1.3.6.1.4.1.164.3.1.1.3 | ScalarchasTotalNoOfIoSlt | read-only | current | This entry indicates the total number of physical IO slots in the chassis, (not all slots hardware should be occupied and active) . |
| 1.3.6.1.4.1.164.3.1.1.4 | ScalarchasTotalNoOfPsSlt | read-only | current | This entry indicates the number of physical Power Supply slots in the chassis. |
| 1.3.6.1.4.1.164.3.1.1.5 | ScalarchasTotalNoOfClSlt | read-only | current | This entry indicates the number of physical Common Logic slots in the chassis. |
| 1.3.6.1.4.1.164.3.1.2 | NodeagnWanGen | |||
| 1.3.6.1.4.1.164.3.1.2.1 | NodestatAgnGen | |||
| 1.3.6.1.4.1.164.3.1.2.1.1 | ScalaragnSDateFormat | read-write | current | This entry indicates the date and time format used for the agnSDateAndTimeCmd and for the alarm history report. |
| 1.3.6.1.4.1.164.3.1.2.1.2 | ScalaragnSDateCmd | read-write | current | This entry indicates the current date as it is known by the agent using its own real-time clock. The format would be as specified by the agnSDateFormat. This p… |
| 1.3.6.1.4.1.164.3.1.2.1.3 | ScalaragnSTimeCmd | read-write | current | This entry indicates the current time as it is known by the agent using its own real-time clock. This parameter can be set for time synchronization between the… |
| 1.3.6.1.4.1.164.3.1.2.1.4 | ScalaragnSActiveCnfg | read-only | current | This entry specifies the unique identifier of the configuration, that is currently active and running. |
| 1.3.6.1.4.1.164.3.1.2.1.5 | ScalaragnSEditCnfg | read-only | current | This entry indicates the unique identifier of the configuration that is currently loaded into the tmp working space for manipulation and update operations. Val… |
| 1.3.6.1.4.1.164.3.1.2.1.6 | ScalaragnSLastCnfgFlipTime | read-only | current | This entry indicates the Date & Time of the last flip to the current configuration at the agent. |
| 1.3.6.1.4.1.164.3.1.2.1.7 | ScalaragnSLastCnfgFlipCause | read-only | current | This entry describes the flip's cause. |
| 1.3.6.1.4.1.164.3.1.2.1.8 | ScalaragnSEditBy | read-only | current | This entry indicates which MMI application is working on the edited config. The editing phase starts at the first modify operation and ends after an update(loa… |
| 1.3.6.1.4.1.164.3.1.2.1.9 | ScalaragnSClkSrc | read-only | current | This entry indicates the source of the system clock. |
| 1.3.6.1.4.1.164.3.1.2.1.10 | ScalaragnSAlrStatus | read-only | current | Indicates the alarm state in the agent level, i.e. lower level (card/port) alarms not included. critical(7) - when there is at least one active (state ON) crit… |
| 1.3.6.1.4.1.164.3.1.2.1.11 | ScalaragnSAlrStatusAll | read-only | current | Indicates the alarm state of the entire agent, i.e. including card and port alarms status. critical(7) - when there is at least one active (state ON) critical … |
| 1.3.6.1.4.1.164.3.1.2.1.12 | ScalaragnSMaskedAlrStat | read-only | current | Indicates the alarm state in the agent level,[ i.e. lower level (card/port) alarms not included] including Masked alarms. critical(7) - when there is at least … |
| 1.3.6.1.4.1.164.3.1.2.1.13 | ScalaragnSMaskedAlrStatAll | read-only | current | Indicates the alarm state of the entire agent, i.e. including card and port alarms status,including Masked alarms. critical(7) - when there is at least one act… |
| 1.3.6.1.4.1.164.3.1.2.1.14 | ScalaragnSTstStatAll | read-only | current | on(3) - when there is at least one test in progress in one of the agent cards, otherwise the value will be off(2). |
| 1.3.6.1.4.1.164.3.1.2.1.15 | TableagnSAlrTable | not-accessible | current | List of agent related alarms and indications for alarms at system level. |
| 1.3.6.1.4.1.164.3.1.2.1.15.1 | RowagnSAlrEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.1.15.1.1 | ColumnagnSAlrIdx | read-only | current | A unique number to identify an entry in the alarm status table of the agent. |
| 1.3.6.1.4.1.164.3.1.2.1.15.1.2 | ColumnagnSAlrCodeDescription | read-only | current | This attribute is a full text description of the alarm . The alarm description includes the following information: alarm code, alarm text, alarm severity, Mask… |
| 1.3.6.1.4.1.164.3.1.2.1.15.1.3 | ColumnagnSAlrCode | read-only | current | A code identifying the alarm of an entry in the alarm status table at system level. |
| 1.3.6.1.4.1.164.3.1.2.1.15.1.4 | ColumnagnSAlrSeverity | read-only | current | The severity of the alarm. |
| 1.3.6.1.4.1.164.3.1.2.1.15.1.5 | ColumnagnSAlrState | read-only | current | State of the alarm. |
| 1.3.6.1.4.1.164.3.1.2.1.15.1.6 | ColumnagnSAlrCounter | read-only | current | A counter - how many times the alarm occured since last clear operation. ON and OFF Alarm will be counted separately. |
| 1.3.6.1.4.1.164.3.1.2.1.15.1.7 | ColumnagnSAlrMask | read-only | current | Alarm mask : on/off. |
| 1.3.6.1.4.1.164.3.1.2.1.15.1.8 | ColumnagnSAlrInvert | read-only | current | Alarm invert : on/off. |
| 1.3.6.1.4.1.164.3.1.2.1.16 | ScalaragnSClearAlrCmd | read-write | current | Setting this attribute to ON, enforce a clear operation on all the agent(general) events. General alarms are alarms which are not specific to a card or port. T… |
| 1.3.6.1.4.1.164.3.1.2.1.17 | ScalaragnSClearAllAlrCmd | read-write | current | Setting this attribute to ON, enforce a clear operation on all MUX alarm events at the levels of agent, slots and ports. The clear operation will not be applie… |
| 1.3.6.1.4.1.164.3.1.2.1.18 | ScalaragnSSanityCheckStatus | read-only | current | Upon completion of the Sanity check process on the TmpCnfg this attribute will be set to: FAIL(2) - when there is at least one error encountered and possibly s… |
| 1.3.6.1.4.1.164.3.1.2.1.19 | ScalaragnSNoOfSanityCheckErr | read-only | current | This entry indicates the number of errors/warnings discovered by the last SanityCheck process. |
| 1.3.6.1.4.1.164.3.1.2.1.20 | TableagnSErrListTable | not-accessible | current | List of errors and warnings found during Sanity Check process. |
| 1.3.6.1.4.1.164.3.1.2.1.20.1 | RowagnSErrListEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.1.20.1.1 | ColumnagnSErrIdx | read-only | current | Unique number to identify an entry in the error list table. The maximum entry value cannot exceed the value of 'agnSNoOfSanityCheckErr'. |
| 1.3.6.1.4.1.164.3.1.2.1.20.1.2 | ColumnagnSErrDescription | read-only | current | This attribute is a full text description of the sanity check error including error code, slot and port numbers related to the code . |
| 1.3.6.1.4.1.164.3.1.2.1.21 | ScalaragnSMaxNoOfCnfg | read-only | current | Maximum number of configurations that can be defined and stored in the MUX. If the mux has a large capacity, the maximum will be limited to 254. |
| 1.3.6.1.4.1.164.3.1.2.1.22 | TableagnSCnfgTable | not-accessible | current | This table contains an entry per configuration. It indicates if the configuration is valid. |
| 1.3.6.1.4.1.164.3.1.2.1.22.1 | RowagnSCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.1.22.1.1 | ColumnagnSEntryIdx | read-only | current | Unique number to identify an entry in the configuration table. |
| 1.3.6.1.4.1.164.3.1.2.1.22.1.2 | ColumnagnSEntryIsValid | read-only | current | This attribute indicates whether the specific configuration is valid in the MUX . Value of NO indicates: no such configuration in the MUX. |
| 1.3.6.1.4.1.164.3.1.2.2 | NodecnfgAgnGen | |||
| 1.3.6.1.4.1.164.3.1.2.2.1 | ScalaragnCSanityCheckCmd | read-write | current | Setting this attribute to on(3) will initiate the process of Sanity check on the TmpCnfg. Upon completion the value will automatically be changed to off(2). |
| 1.3.6.1.4.1.164.3.1.2.2.2 | ScalaragnCSaveCnfgIdxCmd | read-write | current | This attribute specifies the Id of the target RealCnfg to which the TmpCnfg should be transferred. Upon set command the MUX will initiate the Sanity-Check proc… |
| 1.3.6.1.4.1.164.3.1.2.2.3 | ScalaragnCLoadCnfgIdxCmd | read-write | current | This attribute specifies the Id of the source Cnfg to be loaded into the TmpCnfg. Upon set operation the actual transfer will be initiated. The operation is va… |
| 1.3.6.1.4.1.164.3.1.2.2.4 | TableagnCClkSrcTable | not-accessible | current | All the entries of this table are identical (have the same value) for all the configurations (1..100) except the TmpCnfg. The write operation into the Table Ob… |
| 1.3.6.1.4.1.164.3.1.2.2.4.1 | RowagnCClkSrcEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.2.4.1.1 | ColumnagnCClkCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg(1..100) being accessed and Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.1.2.2.4.1.2 | ColumnagnCClkSrcIdx | read-only | current | An index to the table. There are only two entries to this table. Index 1 points to the Master clock parameters and Index 2 points to the Fallback clock paramet… |
| 1.3.6.1.4.1.164.3.1.2.2.4.1.3 | ColumnagnCClkSrcMode | read-write | current | The source of the nodal timing. |
| 1.3.6.1.4.1.164.3.1.2.2.4.1.4 | ColumnagnCClkSrcSlt | read-write | current | This entry is valid only when we are working in rxClk mode. For an invalid entry, the return value will be '7fff'h. |
| 1.3.6.1.4.1.164.3.1.2.2.4.1.5 | ColumnagnCClkSrcPrt | read-write | current | This entry is valid only when we are working in rxClk or adaptive mode. For an invalid entry, the return value will be '7fff'h. - For rxClk mode, the values ca… |
| 1.3.6.1.4.1.164.3.1.2.2.5 | ScalaragnCDeleteCnfgIdxCmd | read-write | current | Setting this attribute will delete the requested DB from the NVRAM . |
| 1.3.6.1.4.1.164.3.1.2.2.6 | ScalaragnCDefaultCnfgIdxCmd | read-write | current | Setting this attribute will define the desired working configuration when no conditions of the Flip DB Table are fulfilled and no Net GO command was issued. Th… |
| 1.3.6.1.4.1.164.3.1.2.2.7 | TableagnCnfgDataTable | not-accessible | current | This table contains data about the agent configurations. The table will support only data about valid configurations of the agent. |
| 1.3.6.1.4.1.164.3.1.2.2.7.1 | RowagnCnfgDataEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.2.7.1.1 | ColumnagnCnfgIdx | read-only | current | This object indicates the Idx of the agent' Cnfg the following objects refer. 255=Temporary Cnfg (Set is done only to this configuration). |
| 1.3.6.1.4.1.164.3.1.2.2.7.1.2 | ColumnagnCnfgDesc | read-write | current | This object is a description of the Configuration, entered by user, to enhance Cnfg recognition. |
| 1.3.6.1.4.1.164.3.1.2.2.7.1.3 | ColumnagnCnfgUpdDate | read-only | current | This object indicates the date when last update of this configuration was performed, as it is known by the agent using its own real-time clock. The format woul… |
| 1.3.6.1.4.1.164.3.1.2.2.7.1.4 | ColumnagnCnfgUpdTime | read-only | current | This object indicates the time when last update of this configuration was performed, as it is known by the agent using its own real-time clock. When update is … |
| 1.3.6.1.4.1.164.3.1.2.2.7.1.5 | ColumnagnCnfgUpdMnger | read-only | current | This object indicates the IP Address of the Manager who performed the last update of this configuration. When update is performed, the agent should save the IP… |
| 1.3.6.1.4.1.164.3.1.2.2.8 | NodeagnCnfgAlarm | |||
| 1.3.6.1.4.1.164.3.1.2.2.8.1 | ScalaragnCnfgAlrFilterWindow | read-write | current | Window of time, in seconds. During this Window, the alarms filter is performed. Same Window for all agent alarms that need filtering. Upon end of the Window, t… |
| 1.3.6.1.4.1.164.3.1.2.2.8.2 | TableagnCnfgAlrTable | not-accessible | current | This table enables the user to set attributes to each alarm. Setting for a non-existing entry agnCnfgAlrMask, agnCnfgAlrInvert or agnCnfgAlrFilter to 'yes'(or … |
| 1.3.6.1.4.1.164.3.1.2.2.8.2.1 | RowagnCnfgAlrEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.2.8.2.1.1 | ColumnagnCnfgAlrCode | read-only | current | The alarm code. The following attributes refer this code. |
| 1.3.6.1.4.1.164.3.1.2.2.8.2.1.2 | ColumnagnCnfgAlrSlot | read-only | current | The alarm slot. The following attributes apply for the alarm code and slot selected. all = the attributes apply to all slots. notApplicable = the selected alar… |
| 1.3.6.1.4.1.164.3.1.2.2.8.2.1.3 | ColumnagnCnfgAlrPort | read-only | current | The alarm port. The following attributes apply for the alarm code,slot and port selected. 200 = all = the attributes apply to all ports of the selected slot. W… |
| 1.3.6.1.4.1.164.3.1.2.2.8.2.1.4 | ColumnagnCnfgAlrMask | read-write | current | An attribute defining the desired Mask state of an alarm . no - unmask (this command is not saved in agent's common database) noAndSave - unmask ; this command… |
| 1.3.6.1.4.1.164.3.1.2.2.8.2.1.5 | ColumnagnCnfgAlrInvert | read-write | current | An attribute defining the desired Invert state of an alarm . no - not inverted. yes - inverted. For MP, it is not applicable for alarms that are currently OFF. |
| 1.3.6.1.4.1.164.3.1.2.2.8.2.1.6 | ColumnagnCnfgAlrFilter | read-write | current | An attribute defining if Filter is desired for the alarm . no - no filter. yes - filter activate. This filter is activated within a window of time defined by a… |
| 1.3.6.1.4.1.164.3.1.2.2.8.2.1.7 | ColumnagnCnfgAlrFilterSet | read-write | current | This is a top threshold causing the alarm that passes it, to be declared Set (ON) at the end of the respective window of time. - For alarms defined by default … |
| 1.3.6.1.4.1.164.3.1.2.2.8.2.1.8 | ColumnagnCnfgAlrFilterReset | read-write | current | This is a bottom threshold causing the alarm that does not pass it, to be declared Reset (ON) at the end of the respective window of time. - For alarms defined… |
| 1.3.6.1.4.1.164.3.1.2.2.8.2.1.9 | ColumnagnCnfgAlrSeverity | read-write | current | An attribute defining desired severity of an alarm code per slot/port |
| 1.3.6.1.4.1.164.3.1.2.2.8.3 | TableagnCnfgAlrReportTable | not-accessible | current | This table enables the user to configure the desired Alarm Reports according to alarms severity. |
| 1.3.6.1.4.1.164.3.1.2.2.8.3.1 | RowagnCnfgAlrReportEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.2.8.3.1.1 | ColumnagnCnfgAlrReportType | read-only | current | The alarm report type. trap - traps will be sent only for alarms having the selected On/Off severity or higher. buffer - only alarms having the selected On/Off… |
| 1.3.6.1.4.1.164.3.1.2.2.8.3.1.2 | ColumnagnCnfgAlrStartReportOn | read-write | current | This object specifies the severity from which alarms will be reported. Alarms having this severity or higher, will be reported. This object specifies the repor… |
| 1.3.6.1.4.1.164.3.1.2.2.8.3.1.3 | ColumnagnCnfgAlrStartReportOff | read-write | current | This object specifies the severity from which alarms will be reported. Alarms having this severity or higher, will be reported. This object specifies the repor… |
| 1.3.6.1.4.1.164.3.1.2.2.9 | ScalaragnCOffsetCmd | read-write | current | An object defining special user request. notApplicable - is RO value for products that do not support this object. normal - nothing special u1 - user 1 - for a… |
| 1.3.6.1.4.1.164.3.1.2.2.10 | TableagnCT1E1RingTable | not-accessible | current | Configuration of all T1/E1 Ring ML cards and ports. The write operation into the table objects is valid only for the TmpCnfg. A Slot/Port that does not partici… |
| 1.3.6.1.4.1.164.3.1.2.2.10.1 | RowagnCT1E1RingEntry | not-accessible | current | An Entry in table agnCT1E1RingTable |
| 1.3.6.1.4.1.164.3.1.2.2.10.1.1 | ColumnagnCT1E1RingCnfgIdx | read-only | current | This object indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.1.2.2.10.1.2 | ColumnagnCT1E1RingPrimeSlot | read-only | current | The slot number of the Primary card of the Ring Pair. |
| 1.3.6.1.4.1.164.3.1.2.2.10.1.3 | ColumnagnCT1E1RingPrimePort | read-only | current | The port number in the Primary Card. For external ports, the value will be as that of the port in the card. Example: external-3 -> 3 external-4 -> 4 For intern… |
| 1.3.6.1.4.1.164.3.1.2.2.10.1.4 | ColumnagnCT1E1RingSecSlot | read-create | current | The slot number of the Secondary card of the Ring Pair. |
| 1.3.6.1.4.1.164.3.1.2.2.10.1.5 | ColumnagnCT1E1RingSecPort | read-create | current | The port number in the Secondary Card. For external ports, the value will be as that of the port in the card. Example: external-3 -> 3 external-4 -> 4 For inte… |
| 1.3.6.1.4.1.164.3.1.2.2.10.1.6 | ColumnagnCT1E1RingRecTime | read-create | current | T1/E1 Ring Recovery Time (sec). Valid Values: 1..99, 65535. 65535=NA. |
| 1.3.6.1.4.1.164.3.1.2.2.10.1.7 | ColumnagnCT1E1RingRowStatus | read-create | current | This parameter allows NMS to create/delete entries of this table. The only possible supported RowStatus vaules are active (1) and destroy (6). |
| 1.3.6.1.4.1.164.3.1.2.2.10.1.8 | ColumnagnCT1E1RingWTR | read-create | current | T1/E1 Ring Wait to Restore (sec). Valid Values: 0..999, 65535. 65535=NA. When the value <> 65535, the value of agnCT1E1RingRecTime must be 65535. |
| 1.3.6.1.4.1.164.3.1.2.2.10.1.9 | ColumnagnCT1E1RingDualFailDetection | read-create | current | T1/E1 Ring - Dual Failure Detection enable/disable. |
| 1.3.6.1.4.1.164.3.1.2.2.11 | ScalaragnCMainExitPort | read-write | current | An object defining the Main Exit Port for the Data of the device. In the Vmux-120 Device the Data can Exit via one of the 2 existing ports: 1. Ethernet port (2… |
| 1.3.6.1.4.1.164.3.1.2.2.12 | TableagnCBuMlTable | not-accessible | current | Configuration for Primary, Secondary and Third Link. These are used for Link Backup. |
| 1.3.6.1.4.1.164.3.1.2.2.12.1 | RowagnCBuMlEntry | not-accessible | current | An Entry in table agnCBuMlTable |
| 1.3.6.1.4.1.164.3.1.2.2.12.1.1 | ColumnagnCBuMlCnfgIdx | not-accessible | current | This object indicates the Index of the Configuration database (1..255) being accessed. Index of 255 relates to the Temporary Configuration. |
| 1.3.6.1.4.1.164.3.1.2.2.12.1.2 | ColumnagnCBuMlRole | not-accessible | current | The Role of the Link. Primary Link is the Link that should usually work. If the Primary Link fails, the data will go through the Secondary Link. If both Primar… |
| 1.3.6.1.4.1.164.3.1.2.2.12.1.3 | ColumnagnCBuMlType | read-write | current | The Type of the Link. For E1/T1 the Link can be Link A - e1T1a or Link B - e1T1b. For ETH-NET, eth (5) can be used. For ETH-NET/USER ethNetUser (6) can be used. |
| 1.3.6.1.4.1.164.3.1.2.2.12.1.4 | ColumnagnCBuMlDefaultGateway | read-write | current | Default Gateway's IP Address. |
| 1.3.6.1.4.1.164.3.1.2.2.12.1.5 | ColumnagnCBuMlSubnetMask | read-write | current | The Link subnet mask. |
| 1.3.6.1.4.1.164.3.1.2.2.12.1.6 | ColumnagnCBuMlOamFrequency | read-write | current | Time in sec. between 2 OAM packets. |
| 1.3.6.1.4.1.164.3.1.2.2.12.1.7 | ColumnagnCBuMlOamTimeoutCycles | read-write | current | No. of cycles the Link will send OAM packets without receiving a response from the remote Link before switching to the Backup Link. |
| 1.3.6.1.4.1.164.3.1.2.2.12.1.8 | ColumnagnCBuMlWaitToRestore | read-write | current | This object defines traffic recovery time (in milliseconds) of the link after its recovery. This object is applicable only when Recovery Mode is revertive. |
| 1.3.6.1.4.1.164.3.1.2.2.12.1.9 | ColumnagnCBuMlBfdSessionNum | read-write | current | This object defines the BFD (Bidirectional Forwarding Detection) session number of the link. When no session exists or when N/A, the value will be 0. |
| 1.3.6.1.4.1.164.3.1.2.2.13 | TableagnCQ50Table | not-accessible | current | Table for the device Q50 parameters. Q50 is a Signaling protocol used between PBX devices. It is possible to control the initiation of calls using Q.50. This i… |
| 1.3.6.1.4.1.164.3.1.2.2.13.1 | RowagnCQ50Entry | not-accessible | current | An Entry in table agnCQ50Table |
| 1.3.6.1.4.1.164.3.1.2.2.13.1.1 | ColumnagnCQ50CnfgIdx | not-accessible | current | This object indicates the Index of the Configuration database (1..255) being accessed. Index of 255 relates to the Temporary Configuration. |
| 1.3.6.1.4.1.164.3.1.2.2.13.1.2 | ColumnagnCQ50StopCallsThresh | read-write | current | This object indicates the Bandwidth Threshold percent (%) above which new Calls from the PBX will be disabled. |
| 1.3.6.1.4.1.164.3.1.2.2.13.1.3 | ColumnagnCQ50DiscardPktThresh | read-write | current | This object indicates the Bandwidth Threshold percent (%) above which voice packets will be discarded. Usually, the value selected should be higher than the va… |
| 1.3.6.1.4.1.164.3.1.2.2.13.1.4 | ColumnagnCQ50BlockNewModemVbdCallsThresh | read-write | current | This object indicates the Modem VBD Calls Threshold percent (%) above which new modem calls will be rejected. |
| 1.3.6.1.4.1.164.3.1.2.2.13.1.5 | ColumnagnCQ50BlockNewModemRelayCallsThresh | read-write | current | This object indicates the Modem Relay Calls Threshold percent (%) above which new modem calls will be rejected. |
| 1.3.6.1.4.1.164.3.1.2.3 | NodecmprAgnGen | |||
| 1.3.6.1.4.1.164.3.1.2.3.1 | TableagnCmprTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.1.2.3.1.1 | RowagnCmprEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.3.1.1.1 | ColumnagnCmprTypIdx | read-only | current | This attribute indicates the Type of the Compressed being referred. |
| 1.3.6.1.4.1.164.3.1.2.3.1.1.2 | ColumnagnCmprCnfgIdx | read-only | current | This attribute indicates the configuration to which the Compressed information is related. |
| 1.3.6.1.4.1.164.3.1.2.3.1.1.3 | ColumnagnCmprVersion | read-only | current | This attribute indicates the version of the internal format of the Compressed data |
| 1.3.6.1.4.1.164.3.1.2.3.1.1.4 | ColumnagnCmprObj | read-write | current | This attribute is the compressed information itself. |
| 1.3.6.1.4.1.164.3.1.2.3.2 | TableagnDlciCmprTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.1.2.3.2.1 | RowagnDlciCmprEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.3.2.1.1 | ColumnagnDlciCmprCnfgIdx | read-only | current | This attribute indicates the configuration to which the Compressed information is related. |
| 1.3.6.1.4.1.164.3.1.2.3.2.1.2 | ColumnagnDlciCmprVersion | read-only | current | This attribute indicates the version of the internal format of the Compressed data |
| 1.3.6.1.4.1.164.3.1.2.3.2.1.3 | ColumnagnDlciCmprDlciIdx | read-only | current | This attribute indicates a unique identifier of the Dlci, the compressed information relates to. The values are between 16 - 991. |
| 1.3.6.1.4.1.164.3.1.2.3.2.1.4 | ColumnagnDlciCmprObj | read-write | current | This attribute is the compressed information itself. |
| 1.3.6.1.4.1.164.3.1.2.3.3 | TableagnAlarmsCmprTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.1.2.3.3.1 | RowagnAlarmsCmprEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.3.3.1.1 | ColumnagnAlarmsCmprVersion | read-only | current | This attribute indicates the version of the internal format of the Compressed data |
| 1.3.6.1.4.1.164.3.1.2.3.3.1.2 | ColumnagnAlarmsCmprAlarmIdx | read-only | current | A unique number to identify an entry in the alarm status table of the agent. |
| 1.3.6.1.4.1.164.3.1.2.3.3.1.3 | ColumnagnAlarmsCmprObj | read-only | current | This attribute is the compressed information itself. |
| 1.3.6.1.4.1.164.3.1.2.3.4 | TableagnAlrBufCmprTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.1.2.3.4.1 | RowagnAlrBufCmprEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.3.4.1.1 | ColumnagnAlrBufCmprVersion | read-only | current | This attribute indicates the version of the internal format of the Compressed data |
| 1.3.6.1.4.1.164.3.1.2.3.4.1.2 | ColumnagnAlrBufCmprAlarmIdx | read-only | current | A unique number to identify an entry in the history alarms buffer of the agent. |
| 1.3.6.1.4.1.164.3.1.2.3.4.1.3 | ColumnagnAlrBufCmprObj | read-only | current | This attribute is the compressed information itself. |
| 1.3.6.1.4.1.164.3.1.2.3.5 | TableagnSCmprErrListTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.1.2.3.5.1 | RowagnSCmprErrListEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.3.5.1.1 | ColumnagnSCmprErrVersion | read-only | current | The version of the compressed data |
| 1.3.6.1.4.1.164.3.1.2.3.5.1.2 | ColumnagnSCmprErrIdx | read-only | current | Unique number to identify an entry in the errors list table. The maximum entry value cannot exceed the value of 'agnSNoOfSanityCheckErr'. |
| 1.3.6.1.4.1.164.3.1.2.3.5.1.3 | ColumnagnSCmprErrObj | read-only | current | This attribute is a full text description of the error, including: error code, slot and port numbers related to the code . |
| 1.3.6.1.4.1.164.3.1.2.3.6 | TableagnTsCmprTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.1.2.3.6.1 | RowagnTsCmprEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.3.6.1.1 | ColumnagnTsCmprVerIdx | read-only | current | This object indicates the version of the internal format of the Compressed data. |
| 1.3.6.1.4.1.164.3.1.2.3.6.1.2 | ColumnagnTsCmprCnfgIdx | read-only | current | This object indicates the configuration to which the Compressed information is related. 255=temporary configuration. Set can be performed only to the temporary… |
| 1.3.6.1.4.1.164.3.1.2.3.6.1.3 | ColumnagnTsCmprSlotIdx | read-only | current | This object indicates the Slot to which the Compressed information is related. For MP-2100: IO-1..IO-12 = (5).. (16) For DXC-30 : IO-1..IO-15 = (5).. (19). NA=… |
| 1.3.6.1.4.1.164.3.1.2.3.6.1.4 | ColumnagnTsCmprPortIdx | read-only | current | This object indicates the Port within the Slot, to which the Compressed information is related. For Port Index see each product's spec. |
| 1.3.6.1.4.1.164.3.1.2.3.6.1.5 | ColumnagnTsCmprPduIdx | read-only | current | This object indicates the PDU index within the same port. That provides for the case when one PDU is not sufficient for all TS Assignment data of the same port. |
| 1.3.6.1.4.1.164.3.1.2.3.6.1.6 | ColumnagnTsCmprData | read-write | current | This object is the compressed information itself. It provides information about all TSs of a port. |
| 1.3.6.1.4.1.164.3.1.2.3.7 | TableagnXCmprTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.1.2.3.7.1 | RowagnXCmprEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.3.7.1.1 | ColumnagnXCmprTypIdx | read-only | current | This attribute indicates the Type of the Compressed being referred. One of the types is V5.1 Variant data. |
| 1.3.6.1.4.1.164.3.1.2.3.7.1.2 | ColumnagnXCmprVersion | read-only | current | This attribute indicates the version of the internal format of the Compressed data. |
| 1.3.6.1.4.1.164.3.1.2.3.7.1.3 | ColumnagnXCmprIdx3 | read-only | current | 3rd index - can be used for any purpose according to the agnXCmprTypIdx. Example: for V5.1 Variant, this attribute indicates the configuration to which the Com… |
| 1.3.6.1.4.1.164.3.1.2.3.7.1.4 | ColumnagnXCmprIdx4 | read-only | current | 4th index - can be used for any purpose according to the agnXCmprTypIdx. Example: for V5.1 Variant,this attribute indicates a unique number of the slot positio… |
| 1.3.6.1.4.1.164.3.1.2.3.7.1.5 | ColumnagnXCmprIdx5 | read-only | current | 5th index - can be used for any purpose according to the agnXCmprTypIdx. Example: for V5.1 Variant,this attribute indicates a unique identifier of the port the… |
| 1.3.6.1.4.1.164.3.1.2.3.7.1.6 | ColumnagnXCmprIdx6 | read-only | current | 6th index - can be used for any purpose according to the agnXCmprTypIdx. Example: for V5.1 Variant,this attribute indicates the Variant index. Valid values are… |
| 1.3.6.1.4.1.164.3.1.2.3.7.1.7 | ColumnagnXCmprIdx7 | read-only | current | 7th index - can be used for any purpose according to the agnXCmprTypIdx. Example: for V5.1 Variant,this attribute is not needed. Therefore, its value will be a… |
| 1.3.6.1.4.1.164.3.1.2.3.7.1.8 | ColumnagnXCmprObj | read-write | current | This attribute is the compressed information itself. |
| 1.3.6.1.4.1.164.3.1.2.4 | NodealrBuffGen | |||
| 1.3.6.1.4.1.164.3.1.2.4.1 | TablealrBufTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.1.2.4.1.1 | RowalrBufEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.4.1.1.1 | ColumnalrBufIdx | read-only | current | This attribute indicates a unique number to identify this entry |
| 1.3.6.1.4.1.164.3.1.2.4.1.1.2 | ColumnalrBufDescription | read-only | current | This entry is a unique text description of the alarm in the buffer. The alarm description includes the following information: alarm code, slot id, card type, c… |
| 1.3.6.1.4.1.164.3.1.2.4.1.1.3 | ColumnalrBufCode | read-only | current | A code identifying the alarm of an entry in the alarm buffer table. |
| 1.3.6.1.4.1.164.3.1.2.4.1.1.4 | ColumnalrBufSlot | read-only | current | The slot number this alarm refers to. When the alarm refers to a system alarm, the value will be 'notApplicable(255)'. |
| 1.3.6.1.4.1.164.3.1.2.4.1.1.5 | ColumnalrBufPort | read-only | current | The port number this alarm refers to. If the port number is irrelevant to this alarm (if it is a system/card level alarm) the value will be 9999. |
| 1.3.6.1.4.1.164.3.1.2.4.1.1.6 | ColumnalrBufSeverity | read-only | current | The severity of the alarm. |
| 1.3.6.1.4.1.164.3.1.2.4.1.1.7 | ColumnalrBufState | read-only | current | State of the alarm (On/Off). |
| 1.3.6.1.4.1.164.3.1.2.4.2 | ScalaralrBufferClearCmd | read-write | current | Setting this attribute to ON, will enforce a clear operation on the Alarms Buffer. Upon completion, the value will automatically change to off(2). For MP-2100/… |
| 1.3.6.1.4.1.164.3.1.2.4.3 | ScalaralrBufIdxUponLastAck | read-only | current | This attribute indicates the value of alrBufIdx for the last existing entry of alrBufTable, when alrBufferClearCmd was last Set to on(3). That will enable a us… |
| 1.3.6.1.4.1.164.3.1.2.5 | NodeagnFlipDb | |||
| 1.3.6.1.4.1.164.3.1.2.5.1 | TableagnCAgendaTable | not-accessible | current | This table devides the week days into categories needed for DB flip consideration. |
| 1.3.6.1.4.1.164.3.1.2.5.1.1 | RowagnCAgendaEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.5.1.1.1 | ColumnagnCAgendaCnfgIdx | read-only | current | Active or Temporary Agenda Table. Both configurations can be read but only the Temporary can be written to. |
| 1.3.6.1.4.1.164.3.1.2.5.1.1.2 | ColumnagnCAgendaDayIdx | read-only | current | Day of week |
| 1.3.6.1.4.1.164.3.1.2.5.1.1.3 | ColumnagnCAgendaDayCategory | read-write | current | The Category of the Day |
| 1.3.6.1.4.1.164.3.1.2.5.2 | TableagnCFlipNetEventsTable | not-accessible | current | This table holds the Net Events the MUX should trace |
| 1.3.6.1.4.1.164.3.1.2.5.2.1 | RowagnCFlipNetEventsEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.5.2.1.1 | ColumnagnCFlipNetEventsCnfgIdx | read-only | current | Active or Temporary Net Events Table. Both configurations can be read but only the Temporary can be written to. |
| 1.3.6.1.4.1.164.3.1.2.5.2.1.2 | ColumnagnCFlipNetEventIdx | read-only | current | Entry within the table |
| 1.3.6.1.4.1.164.3.1.2.5.2.1.3 | ColumnagnCFlipNetEventActive | read-write | current | Indicates if the entry is valid. In order to Add/Modify parameters of an entry, this object should be set to Yes. In order to delete an entry, this object shou… |
| 1.3.6.1.4.1.164.3.1.2.5.2.1.4 | ColumnagnCFlipNetEventType | read-write | current | The Net Event type |
| 1.3.6.1.4.1.164.3.1.2.5.2.1.5 | ColumnagnCFlipNetEventNo | read-write | current | The Net Event No. (Bit Index) |
| 1.3.6.1.4.1.164.3.1.2.5.2.1.6 | ColumnagnCFlipNetEventSlot | read-write | current | The slot to which the net event relates . Not applicable for time event |
| 1.3.6.1.4.1.164.3.1.2.5.2.1.7 | ColumnagnCFlipNetEventPort | read-write | current | The port within the relevant slot. Valid values: - extPrt1(1)..exPrt16(16) - notApplicable(100) - inPrt1(101)..inPrt84(184) |
| 1.3.6.1.4.1.164.3.1.2.5.2.1.8 | ColumnagnCFlipNetEventISD | read-write | current | The time in seconds since the Net Event was reported as ON until it is considered as ON. Not relevant for time events. |
| 1.3.6.1.4.1.164.3.1.2.5.2.1.9 | ColumnagnCFlipNetEventOSD | read-write | current | The time in seconds since the net event was reported as OFF until it is considered as OFF. Not relevant for time events. |
| 1.3.6.1.4.1.164.3.1.2.5.2.1.10 | ColumnagnCFlipNetEventDayType | read-write | current | The time event relates to all days defined in this category in the agnCAgendaTable. Applicable only for time event |
| 1.3.6.1.4.1.164.3.1.2.5.2.1.11 | ColumnagnCFlipNetEventStartTime | read-write | current | The time event will be activated at this time. The format is hh:mm. |
| 1.3.6.1.4.1.164.3.1.2.5.2.1.12 | ColumnagnCFlipNetEventEndTime | read-write | current | The time event will be deactivated at this time. The format is hh:mm. |
| 1.3.6.1.4.1.164.3.1.2.5.3 | TableagnCFlipTable | not-accessible | current | The DB Flip Decisions Table |
| 1.3.6.1.4.1.164.3.1.2.5.3.1 | RowagnCFlipEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.5.3.1.1 | ColumnagnCFlipCnfgIdx | read-only | current | Active or Temporary Flip Decisions Table. Both configurations can be read but only the Temporary can be written to. |
| 1.3.6.1.4.1.164.3.1.2.5.3.1.2 | ColumnagnCFlipIdx | read-only | current | Entry number within the table |
| 1.3.6.1.4.1.164.3.1.2.5.3.1.3 | ColumnagnCFlipActive | read-write | current | Indicates if the entry is valid. In order to Add/Modify parameters of an entry this object should be Set to Yes. In order to delete an entry, this object shoul… |
| 1.3.6.1.4.1.164.3.1.2.5.3.1.4 | ColumnagnCFlipLogicalExp | read-write | current | A logical expression composed of events numbers (which were configured in the 'AgnCFlipNetEvantsTable') and logical operators ('|', '&', '!', '(', ')') between… |
| 1.3.6.1.4.1.164.3.1.2.5.3.1.5 | ColumnagnCFlipDbNo | read-write | current | The ID of the required DB |
| 1.3.6.1.4.1.164.3.1.2.5.3.1.6 | ColumnagnCFlipDiscardDe | read-write | current | Indicates whether the Mux should start discarding all DE. (MP3000 Only). |
| 1.3.6.1.4.1.164.3.1.2.5.4 | NodeagnFlipDbControls | |||
| 1.3.6.1.4.1.164.3.1.2.5.4.1 | ScalaragnCFlipDbSanityCheckCmd | read-write | current | Setting this attribute to on(3) will initiate the process of Sanity check on the Temp Flip Db and automatically be changed to off(2). |
| 1.3.6.1.4.1.164.3.1.2.5.4.2 | ScalaragnCSaveFlipDbCmd | read-write | current | Setting this attribute to on(3) will initiate the process of Sanity check on the Temp Flip Db and if it is OK, it will save the Flip Db in the NVRAM, activatin… |
| 1.3.6.1.4.1.164.3.1.2.5.4.3 | ScalaragnCSaveNetCnfgIdxCmd | read-write | current | This attribute specifies the Id of the target NVRAM Cnfg to which the TmpCnfg should be transferred. Upon set command the MUX will initiate the Sanity-Check pr… |
| 1.3.6.1.4.1.164.3.1.2.5.4.4 | ScalaragnCSaveNetFlipDbCmd | read-write | current | Setting this attribute to on(3) will save the Temp Flip DB Into the NVRAM without actual flip. |
| 1.3.6.1.4.1.164.3.1.2.5.4.5 | ScalaragnCNetGoCmd | read-write | current | Setting this attribute to On will broadcast a 'GO' command to the network. When a Mux receives a 'GO' command it issues a delay for 'agnCNetDelay' seconds and … |
| 1.3.6.1.4.1.164.3.1.2.5.4.6 | ScalaragnCNetDelay | read-write | current | This attribute determines the period of time in seconds that takes for a message to be transferred over all the network. After a 'GO' command the MUX issues a … |
| 1.3.6.1.4.1.164.3.1.2.5.4.7 | ScalaragnCNetEventsBcast | read-write | current | This object determines if the Net Events will be Broadcasted to other Muxes of the Net or not. disabled - Net Events will NOT be Broadcasted enabled - Net Even… |
| 1.3.6.1.4.1.164.3.1.2.5.4.8 | ScalaragnCNetEventsBcastInterval | read-write | current | When agnCNetEventsBcast is enabled, this object determines the interval of time in seconds, between two consecutive Net Events transferred over the network. De… |
| 1.3.6.1.4.1.164.3.1.2.6 | NodeagnSa | |||
| 1.3.6.1.4.1.164.3.1.2.6.1 | ScalaragnSaSwchStatus | read-only | current | This object indicates the status of the switches on the stand-alone unit. Each switch is represented by a bit. The status is a sum of 2**n, according to the bi… |
| 1.3.6.1.4.1.164.3.1.2.7 | NodeagnListDecoding | |||
| 1.3.6.1.4.1.164.3.1.2.7.1 | TableagnListDecodingTable | not-accessible | current | A decoding table . For each type of list, a description is given for each existing code. |
| 1.3.6.1.4.1.164.3.1.2.7.1.1 | RowagnListDecodingEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.7.1.1.1 | ColumnagnListDecodingType | read-only | current | The type of list the decoding data refers to. alr - Alarms list sanity - Sanity Check Error list. counter - Counter type of ifPerfCounterType |
| 1.3.6.1.4.1.164.3.1.2.7.1.1.2 | ColumnagnListDecodingCode | read-only | current | The specific code for which decoding is needed. |
| 1.3.6.1.4.1.164.3.1.2.7.1.1.3 | ColumnagnListDecodingDescription | read-only | current | The description fitting the specific code and type of list required. |
| 1.3.6.1.4.1.164.3.1.2.7.1.1.4 | ColumnagnListDecodingDefState | read-only | current | This object is applicable only for agnListDecodingType=alr. It reports the default state/severity of each alarm. User can change the severity of the alarms def… |
| 1.3.6.1.4.1.164.3.1.2.7.1.1.5 | ColumnagnListDecodingSeverity | read-write | current | This object is applicable only for agnListDecodingType=alr. It enables the user to select a severity for each alarm. The severity is set per alarm code (same f… |
| 1.3.6.1.4.1.164.3.1.2.7.1.1.6 | ColumnagnListDecodingAcmRelaySlt | read-write | current | This object indicates the ACM slot, desired for outbound relay (report) for the selected alarm. In the ?004 Unit the entries io6(10)..io12(16) are not valid. n… |
| 1.3.6.1.4.1.164.3.1.2.7.1.1.7 | ColumnagnListDecodingAcmRelayPrt | read-write | current | This object indicates the ACM port within the slot, desired for outbound relay (report) for the selected alarm. notApplicable - when agnListDecodingType=sanity… |
| 1.3.6.1.4.1.164.3.1.2.8 | NodeagnSystemDlci | |||
| 1.3.6.1.4.1.164.3.1.2.8.1 | TableagnDlciTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.1.2.8.1.1 | RowagnDlciEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.8.1.1.1 | ColumnagnDlciCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.1.2.8.1.1.2 | ColumnagnDlciLSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. This is the Source Slot of the DLCI. vs=Voice Switching In the ?004 Unit the entrie… |
| 1.3.6.1.4.1.164.3.1.2.8.1.1.3 | ColumnagnDlciLPrtIdx | read-only | current | This attribute indicates a unique external or internal port number, including linkSelector or encapsulator. This is the Source Port of the DLCI. 100=noConnect … |
| 1.3.6.1.4.1.164.3.1.2.8.1.1.4 | ColumnagnDlciLIdx | read-only | current | This attribute indicates a unique index for each possible used DLCI(16..991). This is the Source Side of the DLCI. 0=notApplicable (for voice switching) LIdx i… |
| 1.3.6.1.4.1.164.3.1.2.8.1.1.5 | ColumnagnDlciHSltIdx | read-only | current | This attribute indicates a unique slot position In the Mux where the DLCI is routed to - Destination Slot. For ISDN BRI ports of MX300/30 units: io1(5) = isdn1… |
| 1.3.6.1.4.1.164.3.1.2.8.1.1.6 | ColumnagnDlciHPrtIdx | read-only | current | This attribute indicates a unique port number where the DLCI is routed to - Destination Port. |
| 1.3.6.1.4.1.164.3.1.2.8.1.1.7 | ColumnagnDlciHIdx | read-only | current | This attribute indicates a unique internal connection DLCI number where the Source DLCI is routed to - the Destination Side of the DLCI. |
| 1.3.6.1.4.1.164.3.1.2.8.1.1.8 | ColumnagnDlciTxBc | read-create | current | This attribute indicates a unique Tx committed bandwidth on the user transmit line or at the port receive line. |
| 1.3.6.1.4.1.164.3.1.2.8.1.1.9 | ColumnagnDlciTxBe | read-create | current | This attribute indicates a unique Tx excess bandwidth on the user transmit line or at the port receive line. |
| 1.3.6.1.4.1.164.3.1.2.8.1.1.10 | ColumnagnDlciRxBc | read-create | current | This attribute indicates a unique Rx committed bandwidth on the user receive line or at the port transmit line. |
| 1.3.6.1.4.1.164.3.1.2.8.1.1.11 | ColumnagnDlciRxBe | read-create | current | This attribute indicates a unique Rx excess bandwidth on the user receive line or at the port transmit line. |
| 1.3.6.1.4.1.164.3.1.2.8.1.1.12 | ColumnagnDlciPriority | read-create | current | This attribute indicates a unique priority of the pcv. 1 is the lowest priority and 7 is the highest priority. |
| 1.3.6.1.4.1.164.3.1.2.8.1.1.13 | ColumnagnDlciStatus | read-only | current | This attribute indicates the status of the pvc. The status is disconnected(1) when one of the sides is programmed as not connected |
| 1.3.6.1.4.1.164.3.1.2.8.1.1.14 | ColumnagnDlciSpoofing | read-create | current | This object refers to sending of RIP messages: - yes : RIP messages will be sent ONLY if there is a change in the Net. - no : RIP messages will be always sent.… |
| 1.3.6.1.4.1.164.3.1.2.8.1.1.15 | ColumnagnDlciFunnelEnable | read-create | current | This object selects Funnel activation: - disabled: Funnel operation will be disabled. The agnDlciTxBe and agnDlciTxBc values are not used for funneling. - enab… |
| 1.3.6.1.4.1.164.3.1.2.8.1.1.16 | ColumnagnDlciRoutingProtocol | read-create | current | This object is relevant only when one side of the DLCI is a CL-NMS interface. It defines which Routing Protocol will be used for management via CL-NMS port. no… |
| 1.3.6.1.4.1.164.3.1.2.8.1.1.17 | ColumnagnDlciRowStatus | read-create | current | This attribute allows to create/delete a row in this table. For creating a row, the NMS should set agnRowStatus.255.id2.id3.id4.id5.id6.id7 = active(1). For de… |
| 1.3.6.1.4.1.164.3.1.2.9 | NodeagnVoiceSwitching | |||
| 1.3.6.1.4.1.164.3.1.2.9.1 | TableagnVoiceSwConfTable | not-accessible | current | MXcess Configuration for Voice Switching. |
| 1.3.6.1.4.1.164.3.1.2.9.1.1 | RowagnVoiceSwConfEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.9.1.1.1 | ColumnagnVoiceSwConfIdx | read-only | current | Active or Temporary Table. Both configurations can be read but only the Temporary can be written to. |
| 1.3.6.1.4.1.164.3.1.2.9.1.1.2 | ColumnagnVoiceSwConfZoneId | read-write | current | 1 or 2 digits, (0-9)(1-9). |
| 1.3.6.1.4.1.164.3.1.2.9.1.1.3 | ColumnagnVoiceSwConfNodeId | read-write | current | 1, 2 or 3 digits, (1-9),(0-9),(0-9). |
| 1.3.6.1.4.1.164.3.1.2.9.1.1.4 | ColumnagnVoiceSwConfNoOfHops | read-write | current | Number of hops the frame will go through the net before deciding to discard the frame (like time-to-live in IP). 0 = notApplicable Default=20 . |
| 1.3.6.1.4.1.164.3.1.2.9.1.1.5 | ColumnagnVoiceSwConfSidt | read-write | current | SIDT: Short Inter Digit Timeout used as timer (in sec.) between digits after routing is completed. The timeout indicates end of dialing and the call can then b… |
| 1.3.6.1.4.1.164.3.1.2.9.1.1.6 | ColumnagnVoiceSwConfLidt | read-write | current | LIDT: Long Inter Digit Timeout used as timer between digits before routing is completed. If no digits were dialed and LIDT expired then the user will get an er… |
| 1.3.6.1.4.1.164.3.1.2.9.1.1.7 | ColumnagnVoiceSwConfDialPlan | read-write | current | This is the Dialing Plan method that will be used in the Voice Switching. Static Dialing Plan - Routing is defined by the current device Zone and Node ID in th… |
| 1.3.6.1.4.1.164.3.1.2.9.2 | TableagnVoiceSwConfRtTable | not-accessible | current | Routing Table for Voice Switching. |
| 1.3.6.1.4.1.164.3.1.2.9.2.1 | RowagnVoiceSwConfRtEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.9.2.1.1 | ColumnagnVoiceSwConfRtDbId | read-only | current | Active or Temporary Table. Both configurations can be read but only the Temporary can be written to. |
| 1.3.6.1.4.1.164.3.1.2.9.2.1.2 | ColumnagnVoiceSwConfRtIdx | read-only | current | The Index of the row. |
| 1.3.6.1.4.1.164.3.1.2.9.2.1.3 | ColumnagnVoiceSwConfRtDigits | read-create | current | Dialed digits: Series of digits 0...9, '*', '#' or '%'. The '*' and '#' can have many uses according to the user's decision. For example, they can be used as p… |
| 1.3.6.1.4.1.164.3.1.2.9.2.1.4 | ColumnagnVoiceSwConfRtAction | read-create | current | Action that the system should perform for the digits: agnVoiceSwConfRtDigits. The action that is allowed depends on the Dialing Plan. Here is the list of the a… |
| 1.3.6.1.4.1.164.3.1.2.9.2.1.5 | ColumnagnVoiceSwConfRtData | read-create | current | This field is relevant for actions hgr(6), and rep(8), numDigDP(11) and contains the following information: For hgr - the number of the Hunt Group. For rep - t… |
| 1.3.6.1.4.1.164.3.1.2.9.2.1.6 | ColumnagnVoiceSwConfRtSlot | read-create | current | Routing Slot- Relevant for actions zone(2), node(3), shortDialing(4), route(12), ext(13). |
| 1.3.6.1.4.1.164.3.1.2.9.2.1.7 | ColumnagnVoiceSwConfRtPort | read-create | current | Routing Port- Relevant for actions zone(2), node(3), shortDialing(4), route(12), ext(13). 100=noConnect (for non-routing case). |
| 1.3.6.1.4.1.164.3.1.2.9.2.1.8 | ColumnagnVoiceSwConfRtDlci | read-create | current | Routing DLCI- Relevant for actions zone(2), node(3), shortDialing(4), route(12), ext(13). Valid values: 0=notApplicable (for non-routing case). 1, 16..991 |
| 1.3.6.1.4.1.164.3.1.2.9.2.1.9 | ColumnagnVoiceSwConfRtRowStatus | read-create | current | Status of the row for creating/deleting entries in the table. The only possible supported RowStatus vaules are active (1), notInService (2), notReady(3), creat… |
| 1.3.6.1.4.1.164.3.1.2.9.2.1.10 | ColumnagnVoiceSwConfRtMaxCalls | read-create | current | Maximum no. of simultaneous voice calls that are allowed in the direction defined by the current entry. Default=0 (No Limit). |
| 1.3.6.1.4.1.164.3.1.2.9.2.1.11 | ColumnagnVoiceSwConfRtPriority | read-create | current | This attribute indicates a unique priority of the Voice Switching Route. 1 is the lowest priority and 7 is the highest priority. 0 means N/A |
| 1.3.6.1.4.1.164.3.1.2.9.5 | TableagnVoiceSwConfHGTable | not-accessible | current | Table of Hunt Groups. |
| 1.3.6.1.4.1.164.3.1.2.9.5.1 | RowagnVoiceSwConfHGEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.9.5.1.1 | ColumnagnVoiceSwConfHGdbIdx | read-only | current | Active or Temporary Table. Both configurations can be read but only the Temporary can be written to. |
| 1.3.6.1.4.1.164.3.1.2.9.5.1.2 | ColumnagnVoiceSwConfHGIdx | read-only | current | For Vmux-300 devices - This object represents a combination of - Hunt Group number and Extension number OR - Port number and Extension number. For other device… |
| 1.3.6.1.4.1.164.3.1.2.9.5.1.3 | ColumnagnVoiceSwConfHGConnect | read-write | current | This attribute indicates whether the hunt group should be considered in any of the mux algorithms. |
| 1.3.6.1.4.1.164.3.1.2.9.5.1.4 | ColumnagnVoiceSwConfHGExt | read-write | current | This is the extension number of the hunt group. 0 is for not valid. The allowed range is 10 - 99. |
| 1.3.6.1.4.1.164.3.1.2.9.5.1.5 | ColumnagnVoiceSwConfHGExtString | read-write | current | This is the extension string of the hunt group. This string is a combination of digits, * and #. |
| 1.3.6.1.4.1.164.3.1.2.9.5.1.6 | ColumnagnVoiceSwConfHGUserParams | read-write | current | This object indicates the User's parameters. |
| 1.3.6.1.4.1.164.3.1.2.9.5.1.7 | ColumnagnVoiceSwConfHGStatus | read-write | current | This object enables the user to create/delete entries in this table. Its usage for values (1)..(6) should be identical to RowStatus SYNTAX. notApplicable(255) … |
| 1.3.6.1.4.1.164.3.1.2.10 | NodeagnSigProfile | |||
| 1.3.6.1.4.1.164.3.1.2.10.1 | TableagnSigProfileTable | not-accessible | current | - For products supporting more than one configuration, the write operation into the Table is valid only to the TmpCnfg entry. - For products that do not suppor… |
| 1.3.6.1.4.1.164.3.1.2.10.1.1 | RowagnSigProfileEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.10.1.1.1 | ColumnagnSigProfileCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. For products supporting more than one configuration,the w… |
| 1.3.6.1.4.1.164.3.1.2.10.1.1.2 | ColumnagnSigProfileIdx | read-only | current | This attribute indicates the Signaling Profile (1..5). For MP-104/204, only Profile=1 will exist. |
| 1.3.6.1.4.1.164.3.1.2.10.1.1.3 | ColumnagnSigProfileRxTx | read-only | current | This attribute indicates if the following objects refer to: Rx or Tx translation. Rx : ML->IO Tx : IO->ML . For MP-104/204, that means: Rx : Signaling to FXS C… |
| 1.3.6.1.4.1.164.3.1.2.10.1.1.4 | ColumnagnSigProfileABCD | read-write | current | For MP-2100/MP-2200 and for MP-104/204 from R2: This object represents 6 parameters, by 3 Octets : Busy Code-MSB nibble, - applicable only for Rx translation I… |
| 1.3.6.1.4.1.164.3.1.2.10.1.1.5 | ColumnagnSigProfileEcanActSignal | read-write | current | Echo Canceller Activation Signal. This object specifies which BIT (A, B, C, or D) and which value (0 or 1) will be used for the echo canceller activation. The … |
| 1.3.6.1.4.1.164.3.1.2.10.1.1.6 | ColumnagnSigProfileEcanRespDelay | read-write | current | Echo Canceller Response Delay. This object specifies the response delay in msec for the activation/deactivation of the echo canceller. The value should be in m… |
| 1.3.6.1.4.1.164.3.1.2.10.2 | TableagnSigProfTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. This is the general table of signaling profiles. |
| 1.3.6.1.4.1.164.3.1.2.10.2.1 | RowagnSigProfEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.10.2.1.1 | ColumnagnSigProfCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. The write operation is valid only to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.1.2.10.2.1.2 | ColumnagnSigProfIdx | read-only | current | This attribute indicates the Signaling Profile (1..5). |
| 1.3.6.1.4.1.164.3.1.2.10.2.1.3 | ColumnagnSigProfName | read-write | current | Profile Name given by user. |
| 1.3.6.1.4.1.164.3.1.2.10.2.1.4 | ColumnagnSigProfType | read-write | current | Profile Type. legacy - usual signaling. The parameters for the Legacy Profiles are detailed in the agnSigProfileTable, above. r2Cas - R2 signaling. The paramet… |
| 1.3.6.1.4.1.164.3.1.2.11 | NodeagnSystemTs | |||
| 1.3.6.1.4.1.164.3.1.2.11.1 | TableagnTsTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.1.2.11.1.1 | RowagnTsEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.11.1.1.1 | ColumnagnTsCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.1.2.11.1.1.2 | ColumnagnTsSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. |
| 1.3.6.1.4.1.164.3.1.2.11.1.1.3 | ColumnagnTsPrtIdx | read-only | current | This attribute indicates a unique external or internal port number. For MP-2100, the valid values will be (for MLs only): - exPrt1(1)..exPrt8(8) - inPrt1(101).… |
| 1.3.6.1.4.1.164.3.1.2.11.1.1.4 | ColumnagnTsIdx | read-only | current | This attribute indicates a unique index for TS (Time-Slot). - for T1 ports - 1..24, Fbit(25) - for E1 ports - 1..31 - for HDSL ports - 1..32 ; 32 will represen… |
| 1.3.6.1.4.1.164.3.1.2.11.1.1.5 | ColumnagnTsBitIdx | read-only | current | This attribute indicates a unique index for the Bit of each TS (Time-Slot). 1..8 - Bit 1.. Bit 8 255 - notApplicable This object is applicable only in Split Ti… |
| 1.3.6.1.4.1.164.3.1.2.11.1.1.6 | ColumnagnTsConSltIdx | read-only | current | This attribute indicates a unique slot position In the Mux where the TS is routed to. |
| 1.3.6.1.4.1.164.3.1.2.11.1.1.7 | ColumnagnTsConPrtIdx | read-only | current | This attribute indicates a unique port id the TS is routed to. notApplicable - when agnTsType=mng or spare For MP-2100/2200: exPrt1 (1) .. exPrt16 (16) , notAp… |
| 1.3.6.1.4.1.164.3.1.2.11.1.1.8 | ColumnagnTsConIdx | read-only | current | This attribute indicates a unique TS number the Src TS is routed to. Valid values: - for T1 ports - 1..24, Fbit(25) - for E1 ports - 1..31 - for HDSL ports - 1… |
| 1.3.6.1.4.1.164.3.1.2.11.1.1.9 | ColumnagnTsType | read-create | current | Time-Slot Type - regarding its connection and media type. voice, data, vcMP - connected and the media is specified. mng - management. This TS is Dedicated to M… |
| 1.3.6.1.4.1.164.3.1.2.11.1.1.10 | ColumnagnTsRowStatus | read-create | current | This attribute allows to create/delete a row in this table. For creating a row, the NMS should set agnTsRowStatus.255.id2.id3.id4.id5.id6.id7.id8 = active(1). … |
| 1.3.6.1.4.1.164.3.1.2.11.1.1.11 | ColumnagnTsDirection | read-create | current | Direction of the connection. This parameter is especially important when in MP a Selected Port is connected to a Connected Port that has no TSs, so it doesn't … |
| 1.3.6.1.4.1.164.3.1.2.12 | NodesystemVoice | |||
| 1.3.6.1.4.1.164.3.1.2.12.1 | TablesystemVoiceTable | not-accessible | current | General Parameters for voice - system level. |
| 1.3.6.1.4.1.164.3.1.2.12.1.1 | RowsystemVoiceEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.12.1.1.1 | ColumnsystemVoiceConfIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed - Active or Temporary Configurations. Idx 255 relates to the temporary TmpCnfg. All config… |
| 1.3.6.1.4.1.164.3.1.2.12.1.1.2 | ColumnsystemVoiceNationalTone | read-write | current | Tone Characteristics (Amplitude, Frequency, delays etc.). These characteristics are defined according to the country. |
| 1.3.6.1.4.1.164.3.1.2.12.1.1.3 | ColumnsystemVoicePacketRate | read-write | current | This object indicates the G.729 and G.711 Coders transmitted Packet Rate in milliseconds. |
| 1.3.6.1.4.1.164.3.1.2.12.1.1.4 | ColumnsystemVoiceFaxSupport | read-write | current | This object allows the user to Disable/Enable Fax support. |
| 1.3.6.1.4.1.164.3.1.2.12.1.1.5 | ColumnsystemVoiceFaxRate | read-write | current | This object indicates the Fax Rate limit. It is irrelevant when Fax support is NA or disabled. |
| 1.3.6.1.4.1.164.3.1.2.12.1.1.6 | ColumnsystemVoiceModemSupport | read-write | current | This object allows the user to Disable/Enable Modem support. |
| 1.3.6.1.4.1.164.3.1.2.12.1.1.7 | ColumnsystemVoiceCoderAndRate | read-write | current | This object indicates the Coder and Rate for the Voice Compression. |
| 1.3.6.1.4.1.164.3.1.2.12.1.1.8 | ColumnsystemVoiceEchoCanceler | read-write | current | This object indicates the Echo Canceler activation. |
| 1.3.6.1.4.1.164.3.1.2.12.1.1.9 | ColumnsystemVoiceTxGain | read-write | current | This object indicates the Transmit Gain (volume) in dB. |
| 1.3.6.1.4.1.164.3.1.2.12.1.1.10 | ColumnsystemVoiceDtmfRelayMethod | read-write | current | This object indicates the DTMF Relay Method that is used to transmit DTMF tones. rfc2833(1) - inband DTMF relay according to RFC-2833. sipInfo(2) - out of band… |
| 1.3.6.1.4.1.164.3.1.2.12.1.1.11 | ColumnsystemVoiceDtmfRelayRxPayloadType | read-write | current | This object indicates the Rx Payload Type for DTMF relay RTP packets. It is relevant only when DTMF Relay Method is RFC-2833. |
| 1.3.6.1.4.1.164.3.1.2.12.1.1.12 | ColumnsystemVoiceDtmfRelayPayloadTypeNeg | read-write | current | This object indicates whether Payload Type Negotiation is used (according to RFC-2833) or not. It is relevant only when DTMF Relay Method is RFC-2833. |
| 1.3.6.1.4.1.164.3.1.2.12.1.1.13 | ColumnsystemVoiceDtmfRelayTxPayloadType | read-write | current | This object indicates the Tx Payload Type for DTMF relay RTP packets. It is relevant only when the Payload Type Negotiation is disabled. |
| 1.3.6.1.4.1.164.3.1.2.12.2 | TablesystemVoiceCoderTable | not-accessible | current | Voice Coders table. |
| 1.3.6.1.4.1.164.3.1.2.12.2.1 | RowsystemVoiceCoderEntry | not-accessible | current | An entry in Voice Coders table. |
| 1.3.6.1.4.1.164.3.1.2.12.2.1.1 | ColumnsystemVoiceCoderConfIdx | not-accessible | current | The first index of the table. This object might represent the Configuration Index (1..100) being accessed; Index=255 relates to the TmpCnfg. For devices with m… |
| 1.3.6.1.4.1.164.3.1.2.12.2.1.2 | ColumnsystemVoiceCoderPriority | not-accessible | current | This object indicates the Coder's Priority. |
| 1.3.6.1.4.1.164.3.1.2.12.2.1.3 | ColumnsystemVoiceCoderCoderAndRate | read-write | current | This object indicates the Coder and Rate for the Voice Compression. |
| 1.3.6.1.4.1.164.3.1.3 | NodemdlWanGen | |||
| 1.3.6.1.4.1.164.3.1.3.1 | NodestatMdlGen | |||
| 1.3.6.1.4.1.164.3.1.3.1.1 | TablemdlSInstTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.1.3.1.1.1 | RowmdlSInstEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.3.1.1.1.1 | ColumnmdlSInstSltIdx | read-only | current | A unique number to identify a slot position in the mux. In the ?004 Unit the entries PsB(2),ClB(4),io6(10)..io(16) are not valid. For the Vmux2100 Main Board c… |
| 1.3.6.1.4.1.164.3.1.3.1.1.1.2 | ColumnmdlSInstCardType | read-only | current | This attribute indicates the type of card installed in the specific slot position. Only PS cards are possible in the PS slots. Only CL cards are possible in th… |
| 1.3.6.1.4.1.164.3.1.3.1.1.1.3 | ColumnmdlSHwVersion | read-only | current | This attribute indicates the Hardware version of the installed card in the specific slot position. |
| 1.3.6.1.4.1.164.3.1.3.1.1.1.4 | ColumnmdlSSwVersion | read-only | current | This attribute indicates the Software version of the installed card in the specific slot position. |
| 1.3.6.1.4.1.164.3.1.3.1.1.1.5 | ColumnmdlSAlrStatus | read-only | current | Indicates the alarm state at module level, i.e. lower level (port alarms) status is not included. This attribute will be set to: critical(7) - when there is at… |
| 1.3.6.1.4.1.164.3.1.3.1.1.1.6 | ColumnmdlSAlrStatusAll | read-only | current | Indicates the alarm state in the module-all level, i.e. lower level (port alarms) included. This attribute will be set to: critical(7) - when there is at least… |
| 1.3.6.1.4.1.164.3.1.3.1.1.1.7 | ColumnmdlSMaskedAlrStat | read-only | current | Indicates the alarm state at module level, [i.e. lower level (port alarms) status is not included],including Masked alarms. This attribute will be set to: crit… |
| 1.3.6.1.4.1.164.3.1.3.1.1.1.8 | ColumnmdlSMaskedAlrStatAll | read-only | current | Indicates the alarm state in the module-all level, i.e. lower level (port alarms) included, including Masked alarms. This attribute will be set to: critical(7)… |
| 1.3.6.1.4.1.164.3.1.3.1.1.1.9 | ColumnmdlSTstStatusAll | read-only | current | This attribute will be set to on(3) when there is at least one test in progress on a channel of the card, otherwise the value will be off(2). |
| 1.3.6.1.4.1.164.3.1.3.1.1.1.10 | ColumnmdlSClearAlrCmd | read-write | current | Setting this command to ON, enforces a clear of all the alarms in the given slot, excluding alarms of port level. The clear operation will not be applied for m… |
| 1.3.6.1.4.1.164.3.1.3.1.1.1.11 | ColumnmdlSClearAllAlrCmd | read-write | current | Setting this command to ON, enforces a clear of all the alarms in the given slot, including all its ports alarms. The clear operation will not be applied for m… |
| 1.3.6.1.4.1.164.3.1.3.1.1.1.12 | ColumnmdlSTemperature | read-only | current | Temperature of the card, in Celsius degrees. |
| 1.3.6.1.4.1.164.3.1.3.1.2 | TablemdlSAlrTable | not-accessible | current | The list of card agent alarms ; includes also an alarm indicating existence of alarms on its ports if there are any. |
| 1.3.6.1.4.1.164.3.1.3.1.2.1 | RowmdlSAlrEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.3.1.2.1.1 | ColumnmdlSAlrIdx | read-only | current | A unique number to identify an entry in the alarm status table. Users should use the get next function to read this table because the indexes are not consecuti… |
| 1.3.6.1.4.1.164.3.1.3.1.2.1.2 | ColumnmdlSAlrSltIdx | read-only | current | This attribute indicates the desired slot position. In the ?004 Unit the entries PsB(2),ClB(4),io6(10)..io12(16) are not valid. For the Vmux2100 Main Board clA… |
| 1.3.6.1.4.1.164.3.1.3.1.2.1.3 | ColumnmdlSAlrCodeDescription | read-only | current | This attribute is a full text description of the alarm . The alarm description includes the following information: alarm code, alarm text, alarm severity, Mask… |
| 1.3.6.1.4.1.164.3.1.3.1.2.1.4 | ColumnmdlSAlrCode | read-only | current | A code identifying the alarm of an entry in the alarm status table at card level. |
| 1.3.6.1.4.1.164.3.1.3.1.2.1.5 | ColumnmdlSAlrSeverity | read-only | current | The severity of the alarm. |
| 1.3.6.1.4.1.164.3.1.3.1.2.1.6 | ColumnmdlSAlrState | read-only | current | State of the alarm. |
| 1.3.6.1.4.1.164.3.1.3.1.2.1.7 | ColumnmdlSAlrCounter | read-only | current | A counter - how many times the alarm occured since last clear operation. ON and OFF Alarm will be counted separately. |
| 1.3.6.1.4.1.164.3.1.3.1.2.1.8 | ColumnmdlSAlrMask | read-only | current | Alarm mask : on/off. |
| 1.3.6.1.4.1.164.3.1.3.1.2.1.9 | ColumnmdlSAlrInvert | read-only | current | Alarm invert : on/off. |
| 1.3.6.1.4.1.164.3.1.3.2 | NodecnfgMdlGen | |||
| 1.3.6.1.4.1.164.3.1.3.2.1 | TablemdlCPrgTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.1.3.2.1.1 | RowmdlCPrgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.3.2.1.1.1 | ColumnmdlCCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg(1..100) being referred. Value 255 specifies the TmpCnfg |
| 1.3.6.1.4.1.164.3.1.3.2.1.1.2 | ColumnmdlCSltIdx | read-only | current | This attribute indicates a unique number of the slot position where the card is inserted. In the ?004 Unit the entries psB(2),clB(4),io6(10)..io(16) are not va… |
| 1.3.6.1.4.1.164.3.1.3.2.1.1.3 | ColumnmdlCPrgCardType | read-write | current | This attribute indicates the type of card assigned to the specific slot in the common configuration. This object is identical in all the configurations (1..100… |
| 1.3.6.1.4.1.164.3.1.3.2.1.1.4 | ColumnmdlCNoOfExternPrt | read-only | current | Number of external ports in the programmed card of the specific slot position |
| 1.3.6.1.4.1.164.3.1.3.2.1.1.5 | ColumnmdlCNoOfInternPrt | read-only | current | Number of internal ports in the programmed card of the specific slot position. |
| 1.3.6.1.4.1.164.3.1.3.2.1.1.6 | ColumnmdlCWorkMode | read-write | current | Working mode of the card. The user may configure the card to work in a stand alone mode or integrated with the device. Example for use in MHS-IP cards: - stand… |
| 1.3.6.1.4.1.164.3.1.3.2.1.1.7 | ColumnmdlCDhcpClientEnable | read-write | current | Enable/Disable the feature of DHCP Client for the selected card. |
| 1.3.6.1.4.1.164.3.1.3.2.1.1.8 | ColumnmdlCRdnExists | read-only | current | This object indicates whether any port of the programmed card is configured to be part of a Redundancy/APS pair. If at least one port of the programmed card is… |
| 1.3.6.1.4.1.164.3.1.3.2.1.1.9 | ColumnmdlCInterfaces | read-only | current | Octet string which indicates 'present' interfaces in card. Each '0' bit stands for non-present interface. Each '1' bit stands for present interface. For ASMi54… |
| 1.3.6.1.4.1.164.3.1.3.3 | NodecmprMdlGen | |||
| 1.3.6.1.4.1.164.3.1.3.3.1 | TablemdlCmprTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.1.3.3.1.1 | RowmdlCmprEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.3.3.1.1.1 | ColumnmdlCmprTypIdx | read-only | current | This attribute indicates the Type of the Compressed being referred. |
| 1.3.6.1.4.1.164.3.1.3.3.1.1.2 | ColumnmdlCmprCnfgIdx | read-only | current | This attribute indicates the configuration to which the Compressed information is related. |
| 1.3.6.1.4.1.164.3.1.3.3.1.1.3 | ColumnmdlCmprVersion | read-only | current | This attribute indicates the version of the internal format of the Compressed data |
| 1.3.6.1.4.1.164.3.1.3.3.1.1.4 | ColumnmdlCmprSltIdx | read-only | current | This attribute indicates a unique number of the slot position where the card is inserted. In the ?004 Unit the entries psB(2),clB(4),io6(10)..io(16) are not va… |
| 1.3.6.1.4.1.164.3.1.3.3.1.1.5 | ColumnmdlCmprObj | read-write | current | This attribute is the compressed information itself. |
| 1.3.6.1.4.1.164.3.1.3.3.2 | TablemdlAlarmsCmprTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.1.3.3.2.1 | RowmdlAlarmsCmprEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.3.3.2.1.1 | ColumnmdlAlarmsCmprVersion | read-only | current | This attribute indicates the version of the internal format of the Compressed data |
| 1.3.6.1.4.1.164.3.1.3.3.2.1.2 | ColumnmdlAlarmsCmprAlarmSlot | read-only | current | This attribute indicates the desired slot position. In the ?004 Unit the entries PsB(2),ClB(4),io6(10)..io(16) are not valid. |
| 1.3.6.1.4.1.164.3.1.3.3.2.1.3 | ColumnmdlAlarmsCmprAlarmIdx | read-only | current | A unique number to identify an entry in the alarm status table of the agent. |
| 1.3.6.1.4.1.164.3.1.3.3.2.1.4 | ColumnmdlAlarmsCmprObj | read-write | current | This attribute is the compressed information itself. |
| 1.3.6.1.4.1.164.3.1.4 | NodeprtWanGen | |||
| 1.3.6.1.4.1.164.3.1.4.1 | NodestatPrtGen | |||
| 1.3.6.1.4.1.164.3.1.4.1.1 | TableprtSInstTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.1.4.1.1.1 | RowprtSInstEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.1 | ColumnprtSInstSltIdx | read-only | current | This attribute indicates a unique number to identify the slot where the card is inserted. In the ?004 Unit the entries io6(10)..io(16) are not valid. For the V… |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.2 | ColumnprtSInstPrtIdx | read-only | current | This attribute indicates a unique number to identify a port in a specific card. The valid ports depend on the installed card: the valid external ports (interfa… |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.3 | ColumnprtSInstPrtType | read-only | current | This attribute describes the type of the designated port. In MX 3000 only external & internal options are used. All the other options are only for MX 30/300 wh… |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.4 | ColumnprtSInstIfIndex | read-only | current | This attribute indicates the unique interface number assigned to the port. The specific interface of this attribute is the same as the interface identified by … |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.5 | ColumnprtSActiveStatus | read-only | current | This attribute describes the activity status of the port. unknown(1) indicates that the information is not supported. notUsed(2) indicates that the ch is not c… |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.6 | ColumnprtSAlrStatus | read-only | current | Indicates the alarm state in the port(ch) agent level. This attribute will be set to: critical(7) - when there is at least one active (state ON) critical alarm… |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.7 | ColumnprtSMaskedAlrStat | read-only | current | Indicates the alarm state in the port(ch) agent level, including Masked alarms. This attribute will be set to: critical(7) - when there is at least one active … |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.8 | ColumnprtSClearAlrCmd | read-write | current | Setting this attribute to on(3) enforces a clear operation of the alarm status events in the given port. The clear operation will not be applied for masked/inv… |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.9 | ColumnprtSTestMask | read-only | current | This is a mask which indicates which tests from the 'prtSTstCmd' list are allowed for the requested port. If a specific test is allowed, its respective bit wil… |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.10 | ColumnprtSTstCmd | read-write | current | Setting this attribute to any of the above values will initiate a test on the specific port if the operation is legal. If the operation is not legal, the mux w… |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.11 | ColumnprtSTstDuration | read-write | current | This attribute indicates the maximum duration of executing a test on the specific port. This entry applies to all the test operations. The resolution will be a… |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.12 | ColumnprtSBertClrCmd | read-write | current | Setting this attribute initiates bert count clear operation. It is valid only when bert test is active on the specific port. |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.13 | ColumnprtSBertTstRslt | read-only | current | This attribute indicates the number of Bit Error Rate indicated during the BERT operation. It is valid only when bert test is active on the specific port. |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.14 | ColumnprtSInterfaceType | read-only | current | This attribute indicates a unique HW interface type of the selected port. |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.15 | ColumnprtSParamStatus | read-only | current | This object indicates Status of parameters specific to the selected port. - For a port that has no special status or is supported by prtSExHsfStatTable - 1 Oct… |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.16 | ColumnprtSTestMaskXp | read-write | current | This is an Expanded test mask of the prtSTestMask object. The prtSTestMask object reached its maximum, being an Integer with 32 bits. This object indicates whi… |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.17 | ColumnprtSRdnStatus | read-only | current | Redundancy Status of this port. noRdn - this port is not part of a Redundancy pair/group. offline - this port is offline from Redundancy point of view. online … |
| 1.3.6.1.4.1.164.3.1.4.1.2 | TableprtSAlrTable | not-accessible | current | The list of port agent alarms. |
| 1.3.6.1.4.1.164.3.1.4.1.2.1 | RowprtSAlrEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.4.1.2.1.1 | ColumnprtSAlrIdx | read-only | current | A unique number to identify an entry in the alarm status table. Users should use the get next function to read this table because the indexes are not consecuti… |
| 1.3.6.1.4.1.164.3.1.4.1.2.1.2 | ColumnprtSAlrSltIdx | read-only | current | This attribute indicates a unique identifier of the slot where the card is inserted. In the ?004 Unit the entries PsB(2),ClB(4),io6(10)..io12(16) are not valid… |
| 1.3.6.1.4.1.164.3.1.4.1.2.1.3 | ColumnprtSAlrPrtIdx | read-only | current | This attribute indicates a unique identifier of the port the alarm applies to. All the values are valid. No alarms exist for a port which does not exist. Valid… |
| 1.3.6.1.4.1.164.3.1.4.1.2.1.4 | ColumnprtSAlrCodeDescription | read-only | current | This attribute is a full text description of the alarm. The alarm description includes the following information: alarm code, alarm text, alarm severity, Maske… |
| 1.3.6.1.4.1.164.3.1.4.1.2.1.5 | ColumnprtSAlrCode | read-only | current | A code identifying the alarm of an entry in the alarm status table at port level. |
| 1.3.6.1.4.1.164.3.1.4.1.2.1.6 | ColumnprtSAlrSeverity | read-only | current | The severity of the alarm. |
| 1.3.6.1.4.1.164.3.1.4.1.2.1.7 | ColumnprtSAlrState | read-only | current | State of the alarm. |
| 1.3.6.1.4.1.164.3.1.4.1.2.1.8 | ColumnprtSAlrCounter | read-only | current | A counter - how many times the alarm occured since last clear operation. ON and OFF Alarm will be counted separately. |
| 1.3.6.1.4.1.164.3.1.4.1.2.1.9 | ColumnprtSAlrMask | read-only | current | Alarm mask : on/off. |
| 1.3.6.1.4.1.164.3.1.4.1.2.1.10 | ColumnprtSAlrInvert | read-only | current | Alarm invert : on/off. |
| 1.3.6.1.4.1.164.3.1.4.1.2.1.11 | ColumnprtSAlrCardType | read-only | current | This attribute indicates the type of card installed in the specific slot position. The enumeration is according to mdlSInstCardType. |
| 1.3.6.1.4.1.164.3.1.4.1.3 | NodestatisPrtGen | |||
| 1.3.6.1.4.1.164.3.1.4.1.3.1 | NodeprtFrStatis | |||
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1 | TableprtFrStatisTable | not-accessible | current | This table is applicable only for an active port running an FR protocol . |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1 | RowprtFrStatisEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.1 | ColumnprtFrStatisSltIdx | read-only | current | This attribute indicates a unique slot position where the module is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. For stand-alone uni… |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.2 | ColumnprtFrStatisPrtIdx | read-only | current | This attribute indicates a unique port number. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.3 | ColumnprtFrStatisInvIdx | read-only | current | The Interval of 15 min. for which the following statistics counters are applicable. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.4 | ColumnprtFrTimeElapsed | read-only | current | The number of seconds that have elapsed since the beginning of the current error-measurement interval. This object is applicable mainly for the current interva… |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.5 | ColumnprtFrRxTotalFrames | read-only | current | The total number of frames received by this port during the selected interval. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.6 | ColumnprtFrTxTotalFrames | read-only | current | The total number of frames sent by this port during the selected interval. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.7 | ColumnprtFrRxTotalBytes | read-only | current | The total number of bytes received by this port during the selected interval. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.8 | ColumnprtFrTxTotalBytes | read-only | current | The total number of bytes sent by this port during the selected interval. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.9 | ColumnprtFrRxMngFrames | read-only | current | The management number of frames received by this port during the selected interval. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.10 | ColumnprtFrTxMngFrames | read-only | current | The management number of frames sent by this port during the selected interval. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.11 | ColumnprtFrRxDeFrames | read-only | current | The number of De frames received by this port during the selected interval. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.12 | ColumnprtFrTxDeFrames | read-only | current | The number of De frames sent by this port during the selected interval. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.13 | ColumnprtFrRxDcrdCongDeFr | read-only | current | The number of De frames discarded due to congestion, received by this port during the selected interval. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.14 | ColumnprtFrTxDcrdCongDeFr | read-only | current | The number of De frames discarded due to congestion, sent by this port during the selected interval. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.15 | ColumnprtFrRxDcrdCongAllFr | read-only | current | All the frames discarded due to congestion, received by this port during the selected interval. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.16 | ColumnprtFrTxDcrdCongAllFr | read-only | current | All the frames discarded due to congestion, sent by this port during the selected interval. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.17 | ColumnprtFrRxFecn | read-only | current | Number of frames received by this port during the selected interval, indicating forward congestion. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.18 | ColumnprtFrTxFecn | read-only | current | Number of frames sent by this port during the selected interval, indicating forward congestion. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.19 | ColumnprtFrRxBecn | read-only | current | Number of frames received by this port during the selected interval, indicating backward congestion. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.20 | ColumnprtFrTxBecn | read-only | current | Number of frames sent by this port during the selected interval, indicating backward congestion. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.21 | ColumnprtFrRxBeViol | read-only | current | Number of data frames received by this port during the selected interval, exceeding the Burst Excess value. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.22 | ColumnprtFrTxBeViol | read-only | current | Number of data frames sent by this port during the selected interval, exceeding the Burst Excess value. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.23 | ColumnprtFrRxBcViol | read-only | current | Number of data frames received by this port during the selected interval, exceeding the Burst Committed value. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.24 | ColumnprtFrTxBcViol | read-only | current | Number of data frames sent by this port during the selected interval, exceeding the Burst Committed value. |
| 1.3.6.1.4.1.164.3.1.4.1.3.2 | NodeprtCrStatis | |||
| 1.3.6.1.4.1.164.3.1.4.1.3.2.1 | TableprtCrStatisTable | not-accessible | current | This table is applicable only for an active port running a CR protocol . |
| 1.3.6.1.4.1.164.3.1.4.1.3.2.1.1 | RowprtCrStatisEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.1 | ColumnprtCrStatisSltIdx | read-only | current | This attribute indicates a unique slot position where the module is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. For stand-alone uni… |
| 1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.2 | ColumnprtCrStatisPrtIdx | read-only | current | This attribute indicates a unique port number. |
| 1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.3 | ColumnprtCrStatisInvIdx | read-only | current | The Interval of 15 min. for which the following statistics counters are applicable. |
| 1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.4 | ColumnprtCrTimeElapsed | read-only | current | The number of seconds that have elapsed since the beginning of the current error-measurement interval. This object is applicable mainly for the current interva… |
| 1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.5 | ColumnprtCrRxTotalCells | read-only | current | The total number of cells received by this port during the selected interval. |
| 1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.6 | ColumnprtCrTxTotalCells | read-only | current | The total number of cells sent by this port during the selected interval. |
| 1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.7 | ColumnprtCrRxDataCells | read-only | current | The number of Data Cells received by this port during the selected interval. |
| 1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.8 | ColumnprtCrTxDataCells | read-only | current | The number of Data Cells sent by this port during the selected interval. |
| 1.3.6.1.4.1.164.3.1.4.1.3.3 | NodeprtDlciStatis | |||
| 1.3.6.1.4.1.164.3.1.4.1.3.3.1 | TableprtDlciStatisTable | not-accessible | current | This table is applicable only for an active port running an FR, FR+ or CR protocol, with valid DLCIs . |
| 1.3.6.1.4.1.164.3.1.4.1.3.3.1.1 | RowprtDlciStatisEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.1 | ColumnprtDlciSltIdx | read-only | current | This attribute indicates a unique slot position where the module is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. For stand-alone uni… |
| 1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.2 | ColumnprtDlciPrtIdx | read-only | current | This attribute indicates a unique port number. |
| 1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.3 | ColumnprtDlciIdx | read-only | current | This attribute indicates a unique DLCI index for each valid DLCI (16..991). |
| 1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.4 | ColumnprtDlciRxDeFrames | read-only | current | The number of De frames received by this DLCI. |
| 1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.5 | ColumnprtDlciTxDeFrames | read-only | current | The number of De frames sent by this DLCI. |
| 1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.6 | ColumnprtDlciRxDcrdCongDeFr | read-only | current | The number of De frames discarded due to congestion, received by this DLCI. |
| 1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.7 | ColumnprtDlciTxDcrdCongDeFr | read-only | current | The number of De frames discarded due to congestion, sent by this DLCI. |
| 1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.8 | ColumnprtDlciRxDcrdCongAllFr | read-only | current | All the frames discarded due to congestion, received by this DLCI. |
| 1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.9 | ColumnprtDlciTxDcrdCongAllFr | read-only | current | All the frames discarded due to congestion, sent by this DLCI. |
| 1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.10 | ColumnprtDlciTxFecn | read-only | current | Number of frames sent by this DLCI, indicating forward congestion. |
| 1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.11 | ColumnprtDlciTxBecn | read-only | current | Number of frames sent by this DLCI, indicating backward congestion. |
| 1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.12 | ColumnprtDlciRxBeViol | read-only | current | Number of data frames received by this DLCI, exceeding the Burst Excess value. |
| 1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.13 | ColumnprtDlciTxBeViol | read-only | current | Number of data frames sent by this DLCI, exceeding the Burst Excess value. |
| 1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.14 | ColumnprtDlciRxBcViol | read-only | current | Number of data frames received by this DLCI, exceeding the Burst Committed value. |
| 1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.15 | ColumnprtDlciTxBcViol | read-only | current | Number of data frames sent by this DLCI, exceeding the Burst Committed value. |
| 1.3.6.1.4.1.164.3.1.4.1.3.4 | NodeprtT1Statis | |||
| 1.3.6.1.4.1.164.3.1.4.1.3.4.1 | TableprtT1FdlMsgTable | not-accessible | current | This table is applicable for a T1 interface with 'esf' LineType . |
| 1.3.6.1.4.1.164.3.1.4.1.3.4.1.1 | RowprtT1FdlMsgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.4.1.3.4.1.1.1 | ColumnprtT1FdlMsgSltIdx | read-only | current | This attribute indicates a unique slot position where the module is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. |
| 1.3.6.1.4.1.164.3.1.4.1.3.4.1.1.2 | ColumnprtT1FdlMsgPrtIdx | read-only | current | This attribute indicates a unique port number. MTML-1/T1 modules have just one external interface. |
| 1.3.6.1.4.1.164.3.1.4.1.3.4.1.1.3 | ColumnprtT1FdlMsgFdlTxRx | read-only | current | The Fdl tx/rx reference of the Fdl message. |
| 1.3.6.1.4.1.164.3.1.4.1.3.4.1.1.4 | ColumnprtT1FdlMsg | read-only | current | FDL message. |
| 1.3.6.1.4.1.164.3.1.4.2 | NodecnfgPrtGen | |||
| 1.3.6.1.4.1.164.3.1.4.2.1 | TableprtExTsSplitTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry, except prtExTsBitTest that will be written directly to the Active Configuration. |
| 1.3.6.1.4.1.164.3.1.4.2.1.1 | RowprtExTsSplitEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.4.2.1.1.1 | ColumnprtExTsCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.1.4.2.1.1.2 | ColumnprtExTsSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. notApplicable - for s… |
| 1.3.6.1.4.1.164.3.1.4.2.1.1.3 | ColumnprtExTsPrtIdx | read-only | current | This attribute indicates a unique port number. Most ML cards have only one external interface. inPrt1 - for MTML-H/E1 cards. For other products' index see thei… |
| 1.3.6.1.4.1.164.3.1.4.2.1.1.4 | ColumnprtExTsIdx | read-only | current | This attribute indicates a unique time slot position. The valid time slots are: 1..24 for T1 Card and 1..31 for E1 interface. In G732S-E1 lines, time slot 16 i… |
| 1.3.6.1.4.1.164.3.1.4.2.1.1.5 | ColumnprtExTsBit | read-only | current | This attribute indicates a unique Bit within the time slot. The valid Bits are: 1..8. 255=NA. |
| 1.3.6.1.4.1.164.3.1.4.2.1.1.6 | ColumnprtExTsIConSlot | read-write | current | This attribute indicates whether the specified time slot is connected/routed internally in the Agent and to which card it is connected. In the ?004 Unit the en… |
| 1.3.6.1.4.1.164.3.1.4.2.1.1.7 | ColumnprtExTsIConPrt | read-write | current | This attribute indicates the internally (In Mux) connected/routed port. For other products' index see their specification. |
| 1.3.6.1.4.1.164.3.1.4.2.1.1.8 | ColumnprtExTsBitTest | read-write | current | This attribute indicates a test to be activated on the selected Bit. It is applicable only when prtExPh1MlTsTest=split(254). none - no test is applied for the … |
| 1.3.6.1.4.1.164.3.1.4.2.1.1.9 | ColumnprtExTsTxSignaling | read-only | current | Link - Tx Signaling per TS, for TSs having TS Type=Voice (agnTsType=voice(2)). It monitors what is sent to Link for the selected TS, for A,B,C,D Signaling Bits… |
| 1.3.6.1.4.1.164.3.1.4.2.1.1.10 | ColumnprtExTsRxSignaling | read-only | current | Link - Rx Signaling per TS, for TSs having TS Type=Voice (agnTsType=voice(2)). It monitors what is received from Link for the selected TS, for A,B,C,D Signalin… |
| 1.3.6.1.4.1.164.3.1.4.2.1.1.11 | ColumnprtExTsTxIoSignaling | read-only | current | IO - Tx Signaling per TS, for TSs having TS Type=Voice (agnTsType=voice(2)). It monitors what is sent to IO port for the selected TS, for A,B,C,D Signaling Bit… |
| 1.3.6.1.4.1.164.3.1.4.2.1.1.12 | ColumnprtExTsRxIoSignaling | read-only | current | IO - Rx Signaling per TS, for TSs having TS Type=Voice (agnTsType=voice(2)). It monitors what is received from IO port for the selected TS, for A,B,C,D Signali… |
| 1.3.6.1.4.1.164.3.1.4.2.2 | NodeprtCnfgAgenda | |||
| 1.3.6.1.4.1.164.3.1.4.2.2.1 | TableprtAgendaBehaviourTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.1.4.2.2.1.1 | RowprtAgendaBehaviourEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.4.2.2.1.1.1 | ColumnprtAgendaBehaviourCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.1.4.2.2.1.1.2 | ColumnprtAgendaBehaviourSltIdx | read-only | current | This parameter should be: - slot number for MX3000 - 255 = N/A for MX300/30. |
| 1.3.6.1.4.1.164.3.1.4.2.2.1.1.3 | ColumnprtAgendaBehaviourPrtIdx | read-only | current | This parameter should be: - port number for MX300/30 - 100 = N/A for MX3000. |
| 1.3.6.1.4.1.164.3.1.4.2.2.1.1.4 | ColumnprtAgendaBehaviourOnOff | read-write | current | Setting this command to on(3) enables the agenda function at module (3000) or port (300/30) level. |
| 1.3.6.1.4.1.164.3.1.4.2.2.2 | TableprtCnfgAgendaTable | not-accessible | current | This table allows the user to schedule the time a session is active per week basis. |
| 1.3.6.1.4.1.164.3.1.4.2.2.2.1 | RowprtCnfgAgendaEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.4.2.2.2.1.1 | ColumnprtCnfgAgendaCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.1.4.2.2.2.1.2 | ColumnprtCnfgAgendaSltIdx | read-only | current | This attribute is equal to: -slot number for MX3000 -255 = N/A for MX300/30 |
| 1.3.6.1.4.1.164.3.1.4.2.2.2.1.3 | ColumnprtCnfgAgendaPrtIdx | read-only | current | This attribute is equal to: - port number for MX300/30 - port number for MX3000. For example 1-4 in MHS-4 cards. - 100 = N/A for MX3000 when not used. |
| 1.3.6.1.4.1.164.3.1.4.2.2.2.1.4 | ColumnprtCnfgAgendaDayIdx | read-only | current | This attribute for which day of the week this row applies. |
| 1.3.6.1.4.1.164.3.1.4.2.2.2.1.5 | ColumnprtCnfgAgendaSesId | read-only | current | The user may define 4 different active intervals per day. |
| 1.3.6.1.4.1.164.3.1.4.2.2.2.1.6 | ColumnprtCnfgAgendaFrom | read-write | current | Start from time interval in seconds. |
| 1.3.6.1.4.1.164.3.1.4.2.2.2.1.7 | ColumnprtCnfgAgendaTo | read-write | current | To time interval in seconds. |
| 1.3.6.1.4.1.164.3.1.4.2.3 | TableprtGenCnfgTable | not-accessible | current | This table allows the user to configure general port parameters. |
| 1.3.6.1.4.1.164.3.1.4.2.3.1 | RowprtGenCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.4.2.3.1.1 | ColumnprtGenCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. The write operation is valid only to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.1.4.2.3.1.2 | ColumnprtGenCnfgSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. |
| 1.3.6.1.4.1.164.3.1.4.2.3.1.3 | ColumnprtGenCnfgPrtIdx | read-only | current | This attribute indicates a unique external or internal port number. For MP: exPrt1 (1) .. exPrt16 (16) , notApplicable(100), inPrt1 (101) .. inPrt84 (184) |
| 1.3.6.1.4.1.164.3.1.4.2.3.1.4 | ColumnprtGenCnfgLinkToSlot | read-write | current | This attribute indicates the slot of the ML card to which the IO port is mapped. |
| 1.3.6.1.4.1.164.3.1.4.2.3.1.5 | ColumnprtGenCnfgLinkToPort | read-write | current | This attribute indicates the port in the prtGenCnfgLinkToSlot of the ML card to which the IO port is mapped. For MP: exPrt1 (1) , exPrt2 (2) , exPrt3 (3) , exP… |
| 1.3.6.1.4.1.164.3.1.4.2.3.1.6 | ColumnprtGenCnfgPortId | read-write | current | IO Port Id for V5.1 use. This object is applicable only for part of the PSTN and ISDN IO ports. Generally, 0 is a valid value. Nevertheless, for ports that do … |
| 1.3.6.1.4.1.164.3.1.4.2.3.1.7 | ColumnprtGenCnfgBusConnection | read-write | current | This object indicates the support of the card regarding Bus Connection. Same value for all ports of the card. partial = 2 Buses (AB) full = 4 Buses (ABCD) part… |
| 1.3.6.1.4.1.164.3.1.4.2.3.1.8 | ColumnprtGenCnfgInbandMng | read-write | current | This object indicates whether Inband Management is used over the link. |
| 1.3.6.1.4.1.164.3.1.4.2.3.1.9 | ColumnprtGenCnfgInbandMngRoutProt | read-write | current | This object indicates the Inband Mng Routing Protocol of the port. |
| 1.3.6.1.4.1.164.3.1.4.2.3.1.10 | ColumnprtGenCnfgProtectionMode | read-write | current | This object indicates the Protection Mode of the port. notApplicable- when Bus Protection Point=No. For VC-4/Omni card this object is supported RO. |
| 1.3.6.1.4.1.164.3.1.4.2.3.1.11 | ColumnprtGenCnfgConnect | read-write | current | This object indicates whether the port should be considered in any of the mux algorithms. |
| 1.3.6.1.4.1.164.3.1.4.2.3.1.12 | ColumnprtGenCnfgSignalingType | read-write | current | This object selects the Type of Signaling used by the port. |
| 1.3.6.1.4.1.164.3.1.4.3 | NodecmprPrtGen | |||
| 1.3.6.1.4.1.164.3.1.4.3.1 | TableprtCmprTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.1.4.3.1.1 | RowprtCmprEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.4.3.1.1.1 | ColumnprtCmprTypIdx | read-only | current | This attribute indicates the Type of the Compressed being referred. |
| 1.3.6.1.4.1.164.3.1.4.3.1.1.2 | ColumnprtCmprCnfgIdx | read-only | current | This attribute indicates the configuration to which the Compressed information is related. |
| 1.3.6.1.4.1.164.3.1.4.3.1.1.3 | ColumnprtCmprVersion | read-only | current | This attribute indicates the version of the internal format of the Compressed data |
| 1.3.6.1.4.1.164.3.1.4.3.1.1.4 | ColumnprtCmprSltIdx | read-only | current | This attribute indicates a unique number of the slot position where the card is inserted. In the ?004 Unit the entries psB(2),clB(4),io6(10)..io(16) are not va… |
| 1.3.6.1.4.1.164.3.1.4.3.1.1.5 | ColumnprtCmprPrtIdx | read-only | current | This attribute indicates a unique identifier of the port the compressed information relates to. Valid values: exPrt1 (1) .. exPrt16 (16) , inPrt1 (101) .. inPr… |
| 1.3.6.1.4.1.164.3.1.4.3.1.1.6 | ColumnprtCmprObj | read-write | current | This attribute is the compressed information itself. |
| 1.3.6.1.4.1.164.3.1.4.3.1.1.7 | ColumnprtCmprStatisticObj | read-only | current | This attribute is the compressed statistics information itself. |
| 1.3.6.1.4.1.164.3.1.4.3.2 | TableprtDlciCmprTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.1.4.3.2.1 | RowprtDlciCmprEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.4.3.2.1.1 | ColumnprtDlciCmprCnfgIdx | read-only | current | This attribute indicates the configuration to which the Compressed information is related. |
| 1.3.6.1.4.1.164.3.1.4.3.2.1.2 | ColumnprtDlciCmprVersion | read-only | current | This attribute indicates the version of the internal format of the Compressed data |
| 1.3.6.1.4.1.164.3.1.4.3.2.1.3 | ColumnprtDlciCmprSltIdx | read-only | current | This attribute indicates a unique number of the slot position where the module is inserted. In the ?004 Unit the entries psB(2),clB(4),io6(10)..io(16) are not … |
| 1.3.6.1.4.1.164.3.1.4.3.2.1.4 | ColumnprtDlciCmprPrtIdx | read-only | current | This attribute indicates a unique identifier of the port the compressed information relates to. All the values are valid. |
| 1.3.6.1.4.1.164.3.1.4.3.2.1.5 | ColumnprtDlciCmprDlciIdx | read-only | current | This attribute indicates a unique identifier of the Dlci the compressed information relates to. The values are between 16 - 991. |
| 1.3.6.1.4.1.164.3.1.4.3.2.1.6 | ColumnprtDlciCmprObj | read-write | current | This attribute is the compressed information itself. |
| 1.3.6.1.4.1.164.3.1.4.3.3 | TableprtAlarmsCmprTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.1.4.3.3.1 | RowprtAlarmsCmprEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.4.3.3.1.1 | ColumnprtAlarmsCmprVersion | read-only | current | This attribute indicates the version of the internal format of the Compressed data |
| 1.3.6.1.4.1.164.3.1.4.3.3.1.2 | ColumnprtAlarmsCmprAlarmSlot | read-only | current | This attribute indicates the desired slot position. In the ?004 Unit the entries PsB(2),ClB(4),io6(10)..io(16) are not valid. For Stand-alone units, notApplica… |
| 1.3.6.1.4.1.164.3.1.4.3.3.1.3 | ColumnprtAlarmsCmprAlarmPort | read-only | current | This attribute indicates a unique identifier of the port the alarm applies to. All the values are valid. No alarms exist for a non-existing port. IP Bundles ar… |
| 1.3.6.1.4.1.164.3.1.4.3.3.1.4 | ColumnprtAlarmsCmprAlarmIdx | read-only | current | A unique number to identify an entry in the alarm status table of the agent. |
| 1.3.6.1.4.1.164.3.1.4.3.3.1.5 | ColumnprtAlarmsCmprObj | read-only | current | This attribute is the compressed information itself. |
| 1.3.6.1.4.1.164.3.1.5 | NodemapWanGen | |||
| 1.3.6.1.4.1.164.3.1.5.1 | TableagnLinkMapTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.1.5.1.1 | RowagnLinkMapEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.5.1.1.1 | ColumnmapLinkId | read-only | current | A unique identifier of the link |
| 1.3.6.1.4.1.164.3.1.5.1.1.2 | ColumnmapLinkSltIdx | read-write | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries clA(3), io6(10)..io12(16) are not valid. |
| 1.3.6.1.4.1.164.3.1.5.1.1.3 | ColumnmapLinkPrtIdx | read-write | current | This attribute indicates a unique port number. |
| 1.3.6.1.4.1.164.3.1.5.1.1.4 | ColumnmapLinkStatus | read-only | current | This attribute indicates the status of the link between the two muxes |
| 1.3.6.1.4.1.164.3.1.6 | NodediverseIfWanGen | |||
| 1.3.6.1.4.1.164.3.1.6.1 | NodeethIf | |||
| 1.3.6.1.4.1.164.3.1.6.1.1 | TableethIfTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.1.6.1.1.1 | RowethIfEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.6.1.1.1.1 | ColumnethIfIdx | read-only | current | A unique index of the ethernet interface/port. |
| 1.3.6.1.4.1.164.3.1.6.1.1.1.2 | ColumnethMode | read-write | current | This object indicates the Ethernet mode of operation. |
| 1.3.6.1.4.1.164.3.1.6.1.1.1.3 | ColumnethBridgingMode | read-write | current | This object indicates the bridging mode of the Ethernet interface. |
| 1.3.6.1.4.1.164.3.1.6.1.1.1.4 | ColumnethEncapsulationCRCMode | read-write | current | This object define the encapsulation type requested for the Ethernet interface. It indicates if we transfer the Ethernet frame to the other side with or withou… |
| 1.3.6.1.4.1.164.3.1.6.1.1.1.5 | ColumnethBackPressure | read-write | current | This parameter defines whether to enable or disable Back pressure. Back Pressure is a flow control parameter. |
| 1.3.6.1.4.1.164.3.1.6.1.1.1.6 | ColumnethLimit4 | read-write | current | This parameter determine the Back off algorithm mode. Every 4 following collisions the Framer will be thrown out (4 times more than usuall). |
| 1.3.6.1.4.1.164.3.1.6.1.1.1.7 | ColumnethSkipInitReset | read-write | current | This parameter defines whether read status on reset. |
| 1.3.6.1.4.1.164.3.1.6.1.1.1.8 | ColumnethMulticastBlock | read-write | current | This parameter defines whether to send multicast message to WAN from LAN or not. |
| 1.3.6.1.4.1.164.3.1.6.1.1.1.9 | ColumnethBroadcastBlock | read-write | current | This parameter defines whether to send broadcast message to WAN from LAN or not. |
| 1.3.6.1.4.1.164.3.1.6.1.1.1.10 | ColumnethSpeed | read-write | current | This parameter defines the line speed. |
| 1.3.6.1.4.1.164.3.1.6.1.1.1.11 | ColumnethRip2 | read-write | current | This parameter defines whether to send RIP II message to WAN from LAN or not |
| 1.3.6.1.4.1.164.3.1.6.1.1.1.12 | ColumnethPortPriority | read-write | current | This parameter defines if priority is to be considered for this Port. |
| 1.3.6.1.4.1.164.3.1.6.1.1.1.13 | ColumnethPortMngEnable | read-write | current | This parameter defines whether management data can pass through this Port. localOnly (4) - Only local device can be managed via this port. |
| 1.3.6.1.4.1.164.3.1.6.1.1.1.14 | ColumnethFlowCtrlMacAddress | read-write | current | In case of flow control - transmit frame with this specific MAC address to inform the other end to stop sending frames. Default: 01.80.C2.00.00.01. |
| 1.3.6.1.4.1.164.3.1.6.1.1.1.15 | ColumnethRateLimit | read-write | current | This parameter defines the Rate Limit of the line, in Mbps. |
| 1.3.6.1.4.1.164.3.1.6.1.1.1.16 | ColumnethJumboFrameEnable | read-write | current | This parameter defines whether to support Jumbo Frame or not. |
| 1.3.6.1.4.1.164.3.1.6.1.1.1.17 | ColumnethAutoMdiXEnable | read-write | current | This parameter defines whether to support automatic change between MDI and MDI[X]. |
| 1.3.6.1.4.1.164.3.1.6.1.1.1.18 | ColumnethPortDataEnable | read-write | current | This parameter defines whether this port is enabled for data (that is not management). no(2) - management can run on this port yes(3) - both management and pay… |
| 1.3.6.1.4.1.164.3.1.6.1.1.1.19 | ColumnethIfUse | read-write | current | This parameter defines the use of the port. 1=NET 2=USER . |
| 1.3.6.1.4.1.164.3.1.6.1.1.1.20 | ColumnethLineOam | read-write | current | This parameter defines the working mode of 802.AH OAM mechanism. |
| 1.3.6.1.4.1.164.3.1.6.1.1.1.21 | ColumnethRoutingProtocol | read-write | current | This parameter defines the routing protocol used above ETH port. |
| 1.3.6.1.4.1.164.3.1.6.1.1.1.22 | ColumnethMdiXManualSwitch | read-write | current | This parameter sets the port to be MDI-X (cross-over) or MDI (straight-through). It is applicable only when ethAutoMdiXEnable = no, namely, only when the autom… |
| 1.3.6.1.4.1.164.3.1.6.1.1.1.23 | ColumnethDot1xEnable | read-write | current | Determines if the Port-Based Network Access Protocol (IEEE-802.1x) is enabled for the Ethernet Port. |
| 1.3.6.1.4.1.164.3.1.6.1.1.1.24 | ColumnethPartnerRateMode | read-write | current | For converters having couples of ports, where each couple contains a port with an SFP connector and a port with a RJ connector, this parameter is relevant for … |
| 1.3.6.1.4.1.164.3.1.6.1.1.1.25 | ColumnethDot1xPortRole | read-write | current | Determine the functionality of the port in the Port-Based Network Access Protocol (IEEE-802.1x) - either Authenticator or Supplicant. |
| 1.3.6.1.4.1.164.3.1.6.1.2 | NodeethIfPerformance | |||
| 1.3.6.1.4.1.164.3.1.6.1.2.1 | TableethIfCurrentTable | not-accessible | current | The Ethernet Current table. When the index specifies the Ethernet interface (only), the counters are for an interval of 15 minutes. |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1 | RowethIfCurrentEntry | not-accessible | current | An entry in the Ethernet Current table. |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1.1 | ColumnethIfCurrentIndex | read-only | current | The index of the Ethernet interface. It may be ifIndex. For some devices (e.g RICi-622GE), supporting several types of intervals, this index will be a concaten… |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1.2 | ColumnethIfCurrentStatus | read-only | current | The status of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was p… |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1.3 | ColumnethIfCurrentInFrames | read-only | current | The counter associated with the number of received frames, encountered by the Ethernet interface in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1.4 | ColumnethIfCurrentInOctets | read-only | current | The counter associated with the number of received octets, encountered by the Ethernet interface in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1.5 | ColumnethIfCurrentAlignmentErrors | read-only | current | The counter associated with the number of received frames, which are not complete (The result of dividing the number of bits by 8 is not an Integer), encounter… |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1.6 | ColumnethIfCurrentFCSErrors | read-only | current | The counter associated with the number of received frames that didn't pass the FCS test, encountered by the Ethernet interface in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1.7 | ColumnethIfCurrentLengthError | read-only | current | The counter associated with the number of received frames with length error, encountered by the Ethernet interface in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1.8 | ColumnethIfCurrentOutFrames | read-only | current | The counter associated with the number of transmitted frames, encountered by the Ethernet interface in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1.9 | ColumnethIfCurrentOutOctets | read-only | current | The counter associated with the number of transmitted octets, encountered by the Ethernet interface in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1.10 | ColumnethIfCurrentSingleCollisionFrames | read-only | current | The counter associated with the number of successfully transmitted frames for which transmission was inhibited by exactly one collision, encountered by the Eth… |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1.11 | ColumnethIfCurrentMultipleCollisionFrames | read-only | current | The counter associated with the number of successfully transmitted frames for which transmission was inhibited by more than one collision, encountered by the E… |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1.12 | ColumnethIfCurrentDeferredTransmissions | read-only | current | The counter associated with the number of transmitted frames for which the first transmission attempt was delayed due to a busy media, encountered by the Ether… |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1.13 | ColumnethIfCurrentLateCollisions | read-only | current | The counter associated with the number of times that a collision was detected later than the first 64 bytes of the frame, encountered by the Ethernet interface… |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1.14 | ColumnethIfCurrentCarrierSenseErrors | read-only | current | The counter associated with the number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame, encountered by… |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1.15 | ColumnethIfCurrentInputCongestionDropped | read-only | current | The counter associated with the number of frames dropped due to lack of buffers in ingress pool, encountered by the Ethernet interface in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1.16 | ColumnethIfCurrentOutputCongestionDropped | read-only | current | The counter associated with the number of dropped frames due to a congestion, encountered by the Transmit direction to the Ethernet interface in the current in… |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1.17 | ColumnethIfCurrentOverflowInFrames | read-only | current | The number of times the associated ethIfCurrentInFrames counter has overflowed in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1.18 | ColumnethIfCurrentOverflowInOctets | read-only | current | The number of times the associated ethIfCurrentInOctets counter has overflowed in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1.19 | ColumnethIfCurrentOverflowFCSErrors | read-only | current | The number of times the associated ethIfCurrentFCSErrors counter has overflowed in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1.20 | ColumnethIfCurrentOverflowOutFrames | read-only | current | The number of times the associated ethIfCurrentOutFrames counter has overflowed in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1.21 | ColumnethIfCurrentOverflowOutOctets | read-only | current | The number of times the associated ethIfCurrentOutOctets counter has overflowed in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1.22 | ColumnethIfCurrentOverflowMultipleCollisionFrames | read-only | current | The number of times the associated ethIfCurrentMultipleCollisionFrames counter has overflowed in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1.23 | ColumnethIfCurrentInUnicastFrames | read-only | current | The number of received Unicast frames, encountered by the Ethernet interface in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1.24 | ColumnethIfCurrentOutUnicastFrames | read-only | current | The number of transmitted Unicast frames, encountered by the Ethernet interface in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1.25 | ColumnethIfCurrentInMulticastFrames | read-only | current | The number of received Multicast frames, encountered by the Ethernet interface in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1.26 | ColumnethIfCurrentOutMulticastFrames | read-only | current | The number of transmitted Multicast frames, encountered by the Ethernet interface in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1.27 | ColumnethIfCurrentInBroadcastFrames | read-only | current | The number of received Broadcast frames, encountered by the Ethernet interface in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1.28 | ColumnethIfCurrentOutBroadcastFrames | read-only | current | The number of transmitted Broadcast frames, encountered by the Ethernet interface in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1.29 | ColumnethIfCurrentInDiscardFrames | read-only | current | The number of received Discarded frames, encountered by the Ethernet interface in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1.30 | ColumnethIfCurrentOutDiscardFrames | read-only | current | The number of transmitted Discarded frames, encountered by the Ethernet interface in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1.31 | ColumnethIfCurrentInPauseFrames | read-only | current | The number of received Pause frames, encountered by the Ethernet interface in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1.32 | ColumnethIfCurrentOutPauseFrames | read-only | current | The number of transmitted Pause frames, encountered by the Ethernet interface in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1.33 | ColumnethIfCurrentOverflowInUnicastFrames | read-only | current | The number of times the associated ethIfCurrentInUnicastFrames counter has overflowed in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1.34 | ColumnethIfCurrentOverflowOutUnicastFrames | read-only | current | The number of times the associated ethIfCurrentOutUnicastFrames counter has overflowed in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1.35 | ColumnethIfCurrentOverflowInMulticastFrames | read-only | current | The number of times the associated ethIfCurrentInMulticastFrames counter has overflowed in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1.36 | ColumnethIfCurrentOverflowOutMulticastFrames | read-only | current | The number of times the associated ethIfCurrentOutMulticastFrames counter has overflowed in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1.37 | ColumnethIfCurrentOverflowInBroadcastFrames | read-only | current | The number of times the associated ethIfCurrentInBroadcastFrames counter has overflowed in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1.38 | ColumnethIfCurrentOverflowOutBroadcastFrames | read-only | current | The number of times the associated ethIfCurrentOutBroadcastFrames counter has overflowed in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1.39 | ColumnethIfCurrentOverflowInDiscardFrames | read-only | current | The number of times the associated ethIfCurrentInDiscardFrames counter has overflowed in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1.40 | ColumnethIfCurrentOverflowOutDiscardFrames | read-only | current | The number of times the associated ethIfCurrentOutDiscardFrames counter has overflowed in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1.41 | ColumnethIfCurrentOverflowInPauseFrames | read-only | current | The number of times the associated ethIfCurrentInPauseFrames counter has overflowed in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.1.1.42 | ColumnethIfCurrentOverflowOutPauseFrames | read-only | current | The number of times the associated ethIfCurrentOutPauseFrames counter has overflowed in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.2 | TableethIfIntervalTable | not-accessible | current | The Ethernet Interval table. When ethIfIntervalIndex specifies the Ethernet interface (only), the counters are for an interval of 15 minutes. |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1 | RowethIfIntervalEntry | not-accessible | current | An entry in the Ethernet Interval table. |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.1 | ColumnethIfIntervalIndex | read-only | current | The index of the Ethernet interface. It may be ifIndex. For some devices (e.g RICi-622GE), supporting several types of intervals, this index will be a concaten… |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.2 | ColumnethIfIntervalNumber | read-only | current | The Interval Number. This number is between 1 and x, where 1 is the most recently completed interval and x is the least recently completed interval. For 15 min… |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.3 | ColumnethIfIntervalStatus | read-only | current | The status of the interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was partialy … |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.4 | ColumnethIfIntervalInFrames | read-only | current | The counter associated with the number of received frames, encountered by the Ethernet interface in the interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.5 | ColumnethIfIntervalInOctets | read-only | current | The counter associated with the number of received octets, encountered by the Ethernet interface in the interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.6 | ColumnethIfIntervalAlignmentErrors | read-only | current | The counter associated with the number of received frames, which are not complete (The result of dividing the number of bits by 8 is not an Integer), encounter… |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.7 | ColumnethIfIntervalFCSErrors | read-only | current | The counter associated with the number of received frames that didn't pass the FCS test, encountered by the Ethernet interface in the interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.8 | ColumnethIfIntervalLengthError | read-only | current | The counter associated with the number of received frames with length error, encountered by the Ethernet interface in the interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.9 | ColumnethIfIntervalOutFrames | read-only | current | The counter associated with the number of transmitted frames, encountered by the Ethernet interface in the interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.10 | ColumnethIfIntervalOutOctets | read-only | current | The counter associated with the number of transmitted octets, encountered by the Ethernet interface in the interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.11 | ColumnethIfIntervalSingleCollisionFrames | read-only | current | The counter associated with the number of successfully transmitted frames for which transmission was inhibited by exactly one collision, encountered by the Eth… |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.12 | ColumnethIfIntervalMultipleCollisionFrames | read-only | current | The counter associated with the number of successfully transmitted frames for which transmission was inhibited by more than one collision, encountered by the E… |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.13 | ColumnethIfIntervalDeferredTransmissions | read-only | current | The counter associated with the number of transmitted frames for which the first transmission attempt was delayed due to a busy media, encountered by the Ether… |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.14 | ColumnethIfIntervalLateCollisions | read-only | current | The counter associated with the number of times that a collision was detected later than the first 64 bytes of the frame, encountered by the Ethernet interface… |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.15 | ColumnethIfIntervalCarrierSenseErrors | read-only | current | The counter associated with the number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame, encountered by… |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.16 | ColumnethIfIntervalInputCongestionDropped | read-only | current | The counter associated with the number of dropped frames due to a congestion, encountered by the Receive direction to the Ethernet interface in the interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.17 | ColumnethIfIntervalOutputCongestionDropped | read-only | current | The counter associated with the number of dropped frames due to a congestion, encountered by the Transmit direction to the Ethernet interface in the interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.18 | ColumnethIfIntervalOverflowInFrames | read-only | current | The number of times the associated ethIfIntervalInFrames counter has overflowed in the interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.19 | ColumnethIfIntervalOverflowInOctets | read-only | current | The number of times the associated ethIfIntervalInOctets counter has overflowed in the interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.20 | ColumnethIfIntervalOverflowFCSErrors | read-only | current | The number of times the associated ethIfIntervalFCSErrors counter has overflowed in the interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.21 | ColumnethIfIntervalOverflowOutFrames | read-only | current | The number of times the associated ethIfIntervalOutFrames counter has overflowed in the interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.22 | ColumnethIfIntervalOverflowOutOctets | read-only | current | The number of times the associated ethIfIntervalOutOctets counter has overflowed in the interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.23 | ColumnethIfIntervalOverflowMultipleCollisionFrames | read-only | current | The number of times the associated ethIfIntervalMultipleCollisionFrames counter has overflowed in the interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.24 | ColumnethIfIntervalInUnicastFrames | read-only | current | The number of received Unicast frames, encountered by the Ethernet interface in the interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.25 | ColumnethIfIntervalOutUnicastFrames | read-only | current | The number of transmitted Unicast frames, encountered by the Ethernet interface in the interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.26 | ColumnethIfIntervalInMulticastFrames | read-only | current | The number of received Multicast frames, encountered by the Ethernet interface in the interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.27 | ColumnethIfIntervalOutMulticastFrames | read-only | current | The number of transmitted Multicast frames, encountered by the Ethernet interface in the interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.28 | ColumnethIfIntervalInBroadcastFrames | read-only | current | The number of received Broadcast frames, encountered by the Ethernet interface in the interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.29 | ColumnethIfIntervalOutBroadcastFrames | read-only | current | The number of transmitted Broadcast frames, encountered by the Ethernet interface in the interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.30 | ColumnethIfIntervalInDiscardFrames | read-only | current | The number of received Discarded frames, encountered by the Ethernet interface in the interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.31 | ColumnethIfIntervalOutDiscardFrames | read-only | current | The number of transmitted Discarded frames, encountered by the Ethernet interface in the interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.32 | ColumnethIfIntervalInPauseFrames | read-only | current | The number of received Pause frames, encountered by the Ethernet interface in the interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.33 | ColumnethIfIntervalOutPauseFrames | read-only | current | The number of transmitted Pause frames, encountered by the Ethernet interface in the interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.34 | ColumnethIfIntervalOverflowInUnicastFrames | read-only | current | The number of times the associated ethIfIntervalInUnicastFrames counter has overflowed in the interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.35 | ColumnethIfIntervalOverflowOutUnicastFrames | read-only | current | The number of times the associated ethIfIntervalOutUnicastFrames counter has overflowed in the interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.36 | ColumnethIfIntervalOverflowInMulticastFrames | read-only | current | The number of times the associated ethIfIntervalInMulticastFrames counter has overflowed in the interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.37 | ColumnethIfIntervalOverflowOutMulticastFrames | read-only | current | The number of times the associated ethIfIntervalOutMulticastFrames counter has overflowed in the interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.38 | ColumnethIfIntervalOverflowInBroadcastFrames | read-only | current | The number of times the associated ethIfIntervalInBroadcastFrames counter has overflowed in the interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.39 | ColumnethIfIntervalOverflowOutBroadcastFrames | read-only | current | The number of times the associated ethIfIntervalOutBroadcastFrames counter has overflowed in the interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.40 | ColumnethIfIntervalOverflowInDiscardFrames | read-only | current | The number of times the associated ethIfIntervalInDiscardFrames counter has overflowed in the interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.41 | ColumnethIfIntervalOverflowOutDiscardFrames | read-only | current | The number of times the associated ethIfIntervalOutDiscardFrames counter has overflowed in the interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.42 | ColumnethIfIntervalOverflowInPauseFrames | read-only | current | The number of times the associated ethIfIntervalInPauseFrames counter has overflowed in the interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.43 | ColumnethIfIntervalOverflowOutPauseFrames | read-only | current | The number of times the associated ethIfIntervalOutPauseFrames counter has overflowed in the interval. |
| 1.3.6.1.4.1.164.3.1.6.1.2.3 | ScalarethPerformanceMode | read-write | current | This object indicates whether OK or Fail statistics will be counted. |
| 1.3.6.1.4.1.164.3.1.6.1.2.4 | TableethIfPerfTable | not-accessible | current | The Ethernet Performance table. |
| 1.3.6.1.4.1.164.3.1.6.1.2.4.1 | RowethIfPerfEntry | not-accessible | current | An entry in the Ethernet Performance table. |
| 1.3.6.1.4.1.164.3.1.6.1.2.4.1.1 | ColumnethIfPerfInOkFrames | read-only | current | The counter associated with the number of received OK frames, encountered by the Ethernet interface since ethPerformanceMode Set to countOK (2) or Reset Statis… |
| 1.3.6.1.4.1.164.3.1.6.1.2.4.1.2 | ColumnethIfPerfOutOkFrames | read-only | current | The counter associated with the number of transmitted OK frames, encountered by the Ethernet interface since ethPerformanceMode Set to countOK (2) or Reset Sta… |
| 1.3.6.1.4.1.164.3.1.6.1.2.4.1.3 | ColumnethIfPerfTotalCollisions | read-only | current | The counter associated with the total number of collisions of any type encountered by the Ethernet interface since ethPerformanceMode Set to countOK (2) or Res… |
| 1.3.6.1.4.1.164.3.1.6.1.2.4.1.4 | ColumnethIfPerfInOkOctets | read-only | current | The counter associated with the number of received OK Octets, encountered by the Ethernet interface since ethPerformanceMode Set to countOK (2) or Reset Statis… |
| 1.3.6.1.4.1.164.3.1.6.1.3 | NodeethIfOamCfm | |||
| 1.3.6.1.4.1.164.3.1.6.1.3.0 | NodeethIfOamCfmEvents | |||
| 1.3.6.1.4.1.164.3.1.6.1.3.0.1 | NotificationethOamCfmDefectCondition | current | This trap indicates that a MEP has a persistent defect condition. | |
| 1.3.6.1.4.1.164.3.1.6.1.3.1 | TableradMepTable | not-accessible | current | MEG End Point (MEP) configuration table associated with Maitenance Entity Group (MEG) End Point. MEP is a short name for an expanded ETH flow point that includ… |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1 | RowradMepEntry | not-accessible | current | An entry in the table. |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.1 | ColumnradOamIdx1 | not-accessible | current | This object may indicate the Bridge Index or Configuration index. |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.2 | ColumnradOamEvcIdx | not-accessible | current | This object indicates the Index of the EVC (Ethernet Virtual Circuit) that the MEP is associated to. |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.3 | ColumnradMepIdx | not-accessible | current | This object indicates the ID of the MEP being accessed. |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.4 | ColumnradMepRowStatus | read-create | current | This attribute allows to create/delete a row in this table. |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.5 | ColumnradMepLocalMepId | read-create | current | This object indicates the local MEP ID. |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.6 | ColumnradMepRemoteMepId | read-create | current | This atribute is currently implemneted at radMepCcTable, that supports multicast. |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.7 | ColumnradMepOamMode | read-create | current | This object determines the OAM mode of the MEP: disabled - no CC is initiated nor responded initiate - the device initiates and responds to CC react - the devi… |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.8 | ColumnradMepContinuityVerMode | read-create | current | This object determines the OAM behavior of the MEP: disabled - no CC is done cc_based - CC is done based on incoming messages lb_based - CC is done based on lo… |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.9 | ColumnradMepMeLevel | read-create | current | At any point in a network, ME Level is used to distinguish between OAM signals belonging to different nested MEs. Maintenance Entity Levels are defined as foll… |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.10 | ColumnradMepOamDestAddrType | read-create | current | This object determines if the OAM messages are sent to user defined unicast address, or to RAD proprietary multicast address. |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.11 | ColumnradMepOamDestMacAddr | read-create | current | This object determines the MAC address that OAM packets are sent to. |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.12 | ColumnradMepDefaultPriority | read-create | current | This object defines the priority of the OAM messages sent when no service is defined on EVC. If a service is defined, the OAM messages will get the highest ser… |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.13 | ColumnradMepCcStatus | read-only | current | This object indicates the Continuity Check (CC) status. |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.14 | ColumnradMepOamProtocol | read-create | current | Determines whether to use proprietary OAM mechanism, or to use the standard (IEEE 802.1ag, ITU-T Y.1731). |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.15 | ColumnradMepMdId | read-create | current | The index of the Maintenance Domain in the radMdTable (radMdIndex). |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.16 | ColumnradMepMaFormat | read-create | current | The type (and thereby format) of the Maintenance Association Name. |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.17 | ColumnradMepMaName | read-create | current | The Short Maintenance Association name. |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.18 | ColumnradMepSpVlanId | read-create | current | The SP (Service Provider) VLAN used when sending an OAM message. |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.19 | ColumnradMepCcInterval | read-create | current | Indicates the interval at which CCMs are sent by a MEP Valid only if radMepOamMode = initiate(4). |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.20 | ColumnradMepTransmitLbmDestMacAddress | read-create | current | The Target MAC Address Field to be transmitted in the Loopback Message: For unicast MAC Address this is the unicast destination MAC address. For multicast MAC … |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.21 | ColumnradMepTransmitLbmDestMepId | read-create | current | The MEPID of another MEP in the same MA to which the LBM is to be sent. This address will be used if the value of radMepTransmitLbmDestIsMepId is yes (3). 802.… |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.22 | ColumnradMepTransmitLbmDestIsMepId | read-create | current | yes (3) indicates that MEPID of the target MEP is used for loopback transmission. no (2) indicates that unicast destination MAC address of the target MEP is us… |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.23 | ColumnradMepTransmitLbmMassages | read-create | current | The number of Loopback messages to be transmitted. |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.24 | ColumnradMepTransmitLbmVlanPriority | read-create | current | The priority to be used in the VLAN tag, if present, in the transmitted frame. The default value is CCM priority. 802.1ag clause 12.14.7.3.2:e |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.25 | ColumnradMepTransmitLbmVlanDropEnable | read-create | current | Drop Enable bit to be used in the VLAN tag, if present, in the transmitted frame. 802.1ag clause 12.14.7.3.2:e |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.26 | ColumnradMepLbrIn | read-only | current | Total number of valid, in-order Loopback Replies received. |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.27 | ColumnradMepLbrInOutOfOrder | read-only | current | The total number of valid, out-of-order Loopback Replies received. |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.28 | ColumnradMepLbmOut | read-only | current | Total number of Loopback Messages transmitted. |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.29 | ColumnradMepTransmitLtmTargetMacAddress | read-create | current | The Target MAC Address Field to be transmitted in the Link Trace Message: A unicast destination MAC address. This address will be used if the value of radMepTr… |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.30 | ColumnradMepTransmitLtmTargetMepId | read-create | current | The MEPID of another MEP in the same MA to which LTM is to be transmitted. This address will be used if the value of radMepTransmitLtmTargetIsMepId is yes (3).… |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.31 | ColumnradMepTransmitLtmTargetIsMepId | read-create | current | yes (3) indicates that MEPID of the target MEP is used for Linktrace transmission. no (2) indicates that unicast destination MAC address of the target MEP is u… |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.32 | ColumnradMepTransmitLtmTtl | read-create | current | The LTM TTL field. Default value, if not specified, is 64. The TTL field indicates the number of hops remaining to the LTM. Decremented by 1 each Linktrace Res… |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.33 | ColumnradMepTransmitLtmActivationCmd | read-create | current | Activation command for starting Loop Trace. Set will be always to 'on' value. After operation was finished, Agent will turn the value to 'off'. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2 | NodeethOamService | |||
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1 | TableethOamServiceTable | not-accessible | current | Service configuration table associated with Services running on a MEP. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1 | RowethOamServiceEntry | not-accessible | current | An entry in the table. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.1 | ColumnethOamServiceIdx | not-accessible | current | This object indicates the Index of the service being accessed. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.2 | ColumnethOamServiceRowStatus | read-create | current | This attribute allows to create/delete a row in this table. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.3 | ColumnethOamServicePriority | read-create | current | This object determines the priority of the service. It is sent as P bits in an OAM message originated by this service. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.4 | ColumnethOamServicePmEnable | read-create | current | This object determines PM (Performance Monitoring) shall be enabled or not for the service. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.5 | ColumnethOamServiceFrameLossRatioThresh | read-create | current | This object determines the Frame Loss ratio threshold in exponent of 1/10. That is, a value of 4 means that the threshold is 1E-4. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.6 | ColumnethOamServiceDelayThresh | read-create | current | This object determines the delay threshold defined for this service, in measurement unit of 0.1 msec. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.7 | ColumnethOamServiceDelayVarThresh | read-create | current | This object determines the delay variation threshold defined for this service, in measurement unit of 0.1 msec. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.8 | ColumnethOamServiceUnavailRatioThresh | read-create | current | This object determines the Unavailability ratio threshold in exponent of 1/10. That is, a value of 4 means that the threshold is 1E-4. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.9 | ColumnethOamServiceTxFrames | read-only | current | Counts the number of frames trnasmitted by since the time the service is up. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.10 | ColumnethOamServiceOverflowTxFrames | read-only | current | The number of times the associated ethOamServiceTxFrames counter has overflowed. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.11 | ColumnethOamServiceFrameLoss | read-only | current | Counts the number of frames lost since the time the service is up. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.12 | ColumnethOamServiceOverflowFrameLoss | read-only | current | The number of times the associated ethOamServiceFrameLoss counter has overflowed. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.13 | ColumnethOamServiceFrameLossRatio | read-only | current | Indicates the ratio of the lost frames since the time the service is up. The value is the ratio multiplied by 1E10. 0xFFFFFFFF will be returned for ratio great… |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.14 | ColumnethOamServiceElapsedTime | read-only | current | Indicates the time elapsed in seconds since the time the service is up. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.15 | ColumnethOamServiceUnavailSec | read-only | current | Indicates the number of unavailable seconds since the time the service is up. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.16 | ColumnethOamServiceUnavailRatio | read-only | current | Indicates the ratio of the unavailable seconds since the time the service is up. The value is the ratio multiplied by 1E10. 0xFFFFFFFF will be returned for rat… |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.17 | ColumnethOamServiceFramesAboveDelay | read-only | current | Indicates the number of frames arrived with delay greater than the delay threshold. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.18 | ColumnethOamServiceOverflowFramesAboveDelay | read-only | current | Indicates the number of times the associated ethOamServiceFramesAboveDelay counter has overflowed. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.19 | ColumnethOamServiceFramesAboveDelayVar | read-only | current | Indicates the number of frames arrived with delay variation greater than the delay variation threshold. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.20 | ColumnethOamServiceOverflowFramesAboveDelayVar | read-only | current | Indicates the number of times the associated ethOamServiceFramesAboveDelayVar counter has overflowed. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.21 | ColumnethOamServiceCurrentDelay | read-only | current | Indicates the last measured delay sample in msec. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.22 | ColumnethOamServiceCurrentDelayVariation | read-only | current | Indicates the last measured delay variation sample in msec. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.23 | ColumnethOamServiceResetCounters | read-create | current | Reset the running PM counters of the selected service. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2 | TableethOamSvcCurrentStatTable | not-accessible | current | Service Current Statistics Table. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1 | RowethOamSvcCurrentStatEntry | not-accessible | current | Current Statistics per service |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.1 | ColumnethOamSvcCurrFramesAboveDelayThresh | read-only | current | Number of frames that arrived in the current interval at a delay greater than the threshold value defined for the service. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.2 | ColumnethOamSvcCurrFramesBelowDelayThresh | read-only | current | Number of frames that arrived in the current interval at a delay lower than or equal to the threshold value defined for the service. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.3 | ColumnethOamSvcCurrFramesAboveDVarThresh | read-only | current | Number of frames that arrived in the current interval at a delay variation greater than the threshold value defined for the service. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.4 | ColumnethOamSvcCurrFramesBelowDVarThresh | read-only | current | Number of frames that arrived in the current interval at a delay variation lower than or equal to the threshold value defined for the service. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.5 | ColumnethOamSvcCurrFramesTxCounter | read-only | current | Number of trnasmitted frames in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.6 | ColumnethOamSvcCurrFramesLossCounter | read-only | current | Number of lost frames in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.7 | ColumnethOamSvcCurrMinRoundTripDelay | read-only | current | The mininal value of round trip delay in the current interval. Values units are of 0.1 msec. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.8 | ColumnethOamSvcCurrMaxRoundTripDelay | read-only | current | The maximum value of round trip delay in the current interval. Values units are of 0.1 msec. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.9 | ColumnethOamSvcCurrAvgRoundTripDelay | read-only | current | The average round trip delay in the current interval. Values units are of 0.1 msec. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.10 | ColumnethOamSvcCurrMaxRoundTripDVar | read-only | current | The maximum value of round trip delay variation in the current interval. Values units are of 0.1 msec. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.11 | ColumnethOamSvcCurrAvgRoundTripDVar | read-only | current | The average round trip delay variation in the current interval. Values units are of 0.1 msec. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.12 | ColumnethOamSvcCurrElapsedTime | read-only | current | The number of seconds that have elapsed since the beginning of the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.13 | ColumnethOamSvcCurrUnavailSec | read-only | current | The number of seconds that the service was unavailable in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3 | TableethOamSvcIntervalTable | not-accessible | current | Service Interval Statistics Table. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1 | RowethOamSvcIntervalEntry | not-accessible | current | Interval Statistics per service |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.1 | ColumnethOamSvcIntervalNum | not-accessible | current | The Interval index, which is actualy the Interval number, where 1 is the most recently completed 15 minute interval, and 96 is the least recently completed 15 … |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.2 | ColumnethOamSvcIntervalFramesAboveDelayThresh | read-only | current | Number of frames that arrived in a delay greater than the threshold value defined for the service in the selected interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.3 | ColumnethOamSvcIntervalFramesBelowDelayThresh | read-only | current | Number of frames that arrived in a delay lower than the threshold value defined for the service in the selected interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.4 | ColumnethOamSvcIntervalFramesAboveDVarThresh | read-only | current | Number of frames that arrived in a delay variation greater than the threshold value defined for the service in the selected interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.5 | ColumnethOamSvcIntervalFramesBelowDVarThresh | read-only | current | Number of frames that arrived in a delay variation lower than the threshold value defined for the service in the selected interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.6 | ColumnethOamSvcIntervalFramesTxCounter | read-only | current | Number of trnasmitted frames in the selected interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.7 | ColumnethOamSvcIntervalFramesLossCounter | read-only | current | Number of lost frames in the selected interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.8 | ColumnethOamSvcIntervalMinRoundTripDelay | read-only | current | The mininal value of round trip delay in the selected interval. Values units are of 0.1 msec. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.9 | ColumnethOamSvcIntervalMaxRoundTripDelay | read-only | current | The maximum value of round trip delay in the selected interval. Values units are of 0.1 msec. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.10 | ColumnethOamSvcIntervalAvgRoundTripDelay | read-only | current | The average round trip delay in the selected interval. Values units are of 0.1 msec. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.11 | ColumnethOamSvcIntervalMaxRoundTripDVar | read-only | current | The maximum value of round trip delay variation in the selected interval. Values units are of 0.1 msec. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.12 | ColumnethOamSvcIntervalAvgRoundTripDVar | read-only | current | The average round trip delay variation in the selected interval. Values units are of 0.1 msec. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.13 | ColumnethOamSvcIntervalUnavailSec | read-only | current | The number of seconds that the service was unavailable in the selected interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4 | TableethOamSvcTotalTable | not-accessible | current | ETH OAM Service Total (24H) Statistics Table. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1 | RowethOamSvcTotalEntry | not-accessible | current | Total Statistics per service |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.1 | ColumnethOamSvcTotalFramesAboveDelayThresh | read-only | current | Number of frames that arrived in a delay greater than the threshold value defined for the service in the last 24H. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.2 | ColumnethOamSvcTotalFramesBelowDelayThresh | read-only | current | Number of frames that arrived in a delay lower than the threshold value defined for the service in the last 24H. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.3 | ColumnethOamSvcTotalFramesAboveDVarThresh | read-only | current | Number of frames that arrived in a delay variation greater than the threshold value defined for the service in the last 24H. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.4 | ColumnethOamSvcTotalFramesBelowDVarThresh | read-only | current | Number of frames that arrived in a delay variation lower than the threshold value defined for the service in the last 24H. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.5 | ColumnethOamSvcTotalFramesTxCounter | read-only | current | Number of trnasmitted frames in the last 24H. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.6 | ColumnethOamSvcTotalFramesLossCounter | read-only | current | Number of lost frames in the last 24H. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.7 | ColumnethOamSvcTotalMinRoundTripDelay | read-only | current | The mininal value of round trip delay in the last 24H. Values units are of 0.1 msec. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.8 | ColumnethOamSvcTotalMaxRoundTripDelay | read-only | current | The maximum value of round trip delay in the last 24H. Values units are of 0.1 msec. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.9 | ColumnethOamSvcTotalAvgRoundTripDelay | read-only | current | The average round trip delay in the last 24H. Values units are of 0.1 msec. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.10 | ColumnethOamSvcTotalMaxRoundTripDVar | read-only | current | The maximum value of round trip delay variation in the last 24H. Values units are of 0.1 msec. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.11 | ColumnethOamSvcTotalAvgRoundTripDVar | read-only | current | The average round trip delay variation in the last 24H. Values units are of 0.1 msec. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.12 | ColumnethOamSvcTotalUnavailSec | read-only | current | The number of seconds that the service was unavailable in the last 24H. |
| 1.3.6.1.4.1.164.3.1.6.1.3.3 | TableradMdTable | not-accessible | current | The MaintenanceDomain table. Each row in the table represents a different maintenance domain. A Maintenance domain is described in 802.1ag (3.22) as the networ… |
| 1.3.6.1.4.1.164.3.1.6.1.3.3.1 | RowradMdEntry | not-accessible | current | The Maintenance Domain table entry. This entry is not lost upon reboot. It is backed up by stable storage |
| 1.3.6.1.4.1.164.3.1.6.1.3.3.1.1 | ColumnradMdIndex | not-accessible | current | The index to the maintenance domain table. |
| 1.3.6.1.4.1.164.3.1.6.1.3.3.1.2 | ColumnradMdFormat | read-create | current | The type (and thereby format) of the Maintenance Domain Name. |
| 1.3.6.1.4.1.164.3.1.6.1.3.3.1.3 | ColumnradMdName | read-create | current | The Maintenance Domain name. The type/format of this object is determined by the value of the radMdNameType object. Each Maintenance Domain has unique name amo… |
| 1.3.6.1.4.1.164.3.1.6.1.3.3.1.4 | ColumnradMdRowStatus | read-create | current | This attribute allows to create/delete a row in this table. The writable columns in a row can not be changed if the row is active. All columns must have a vali… |
| 1.3.6.1.4.1.164.3.1.6.1.3.4 | TableradMepLtrTable | not-accessible | current | This table contains a list of Linktrace replies received by a specific MEP in response to a linktrace message. |
| 1.3.6.1.4.1.164.3.1.6.1.3.4.1 | RowradMepLtrEntry | not-accessible | current | The LinktraceReply table entry. |
| 1.3.6.1.4.1.164.3.1.6.1.3.4.1.1 | ColumnradMepLtrReceiveOrder | not-accessible | current | An index to distinguish among multiple LTRs with the same LTR Transaction Identifier field value. radMepLtrReceiveOrder are assigned sequentially from 1, in th… |
| 1.3.6.1.4.1.164.3.1.6.1.3.4.1.2 | ColumnradMepLtrTtl | read-only | current | TTL field value for a returned LTR. |
| 1.3.6.1.4.1.164.3.1.6.1.3.4.1.3 | ColumnradMepLtrMacAddr | read-only | current | The MAC address in the header of the returned LTR. |
| 1.3.6.1.4.1.164.3.1.6.1.3.4.1.4 | ColumnradMepLtrRelay | read-only | current | The value returned in the Relay Action field: rlyHit - the LTM reached an MP whose MAC address matches the target MAC address. rlyFdb - the Egress Port was det… |
| 1.3.6.1.4.1.164.3.1.6.1.3.4.1.5 | ColumnradMepLtrIngress | read-only | current | The value returned in the Ingress Action Field of the LTM. ingNoTlv - no Reply Ingress TLV was returned in the LTM. ingOK - the target data frame would be pass… |
| 1.3.6.1.4.1.164.3.1.6.1.3.4.1.6 | ColumnradMepLtrIngressPortIdSubtype | read-only | current | The format of the Ingress Port ID. If the radMepLtrIngress object contains the value egrNoTlv(1), then the contents of this object are meaningless. 802.1ag cla… |
| 1.3.6.1.4.1.164.3.1.6.1.3.4.1.7 | ColumnradMepLtrIngressPortId | read-only | current | Ingress Port ID. This is an alpha-numeric string that contains a specific identifier for the port. The format of this object is determined by the value of the … |
| 1.3.6.1.4.1.164.3.1.6.1.3.4.1.8 | ColumnradMepLtrEgress | read-only | current | The value returned in the Egress Action Field of the LTM. The value egrNoTlv(1) indicates that no Reply Egress TLV was returned in the LTM. 802.1ag clauses 12.… |
| 1.3.6.1.4.1.164.3.1.6.1.3.4.1.9 | ColumnradMepLtrEgressPortIdSubtype | read-only | current | The format of the egress Port ID. If the radMepLtrEgress object contains the value egrNoTlv(1), then the contents of this object are meaningless. 802.1ag claus… |
| 1.3.6.1.4.1.164.3.1.6.1.3.4.1.10 | ColumnradMepLtrEgressPortId | read-only | current | Egress Port ID. The format of this object is determined by the value of the radMepLtrEgressPortIdSubtype object. If the radMepLtrEgress object contains the val… |
| 1.3.6.1.4.1.164.3.1.6.1.3.5 | TableradMepCcStatusTable | not-accessible | current | This table contains a list of CC Status received by a specific MEP from different Remote MEPs. |
| 1.3.6.1.4.1.164.3.1.6.1.3.5.1 | RowradMepCcStatusEntry | not-accessible | current | An entry in the CC Status Table. |
| 1.3.6.1.4.1.164.3.1.6.1.3.5.1.1 | ColumnradMepRemoteMepIdx | not-accessible | current | This is a running index for arriving CC messages (from different Remote MEPs) for a specific MEP ID. |
| 1.3.6.1.4.1.164.3.1.6.1.3.5.1.2 | ColumnradMepCcStatusRemMepId | read-create | current | This attribute indicates the Remote MEP ID from which the CC messages has arrived. |
| 1.3.6.1.4.1.164.3.1.6.1.3.5.1.3 | ColumnradMepCcStat | read-only | current | This object indicates the Continuity Check (CC) status (ITU-T Y.1731, Appendix I): mismerge - A MEP detects a Mismerge condition when a CCM frame arrives with … |
| 1.3.6.1.4.1.164.3.1.6.1.3.5.1.4 | ColumnradMepCcStatusMacAddr | read-only | current | This object indicates the MAC Address in the CC Status message received. |
| 1.3.6.1.4.1.164.3.1.6.1.3.6 | ScalarethOamStdEtherType | read-write | current | The Standard Ether Type in an OAM message. This object will be RW until a formal value will be issued for standard Ethernet Type. When such Standard will exist… |
| 1.3.6.1.4.1.164.3.1.6.1.3.7 | ScalarethOamStdMacAddress | read-write | current | The Standard MAC Address in an OAM message. This object will be RW until a formal value will be issued for standard MAC Address. When such Standard will exist,… |
| 1.3.6.1.4.1.164.3.1.6.1.3.8 | Tabledot1agXCfmMdTable | not-accessible | current | The Maintenance Domain table. Each row in the table represents a different maintenance association. |
| 1.3.6.1.4.1.164.3.1.6.1.3.8.1 | Rowdot1agXCfmMdEntry | not-accessible | current | The Maintenance Domain table entry. |
| 1.3.6.1.4.1.164.3.1.6.1.3.8.1.1 | Columndot1agXCfmMdProtocol | read-create | current | . |
| 1.3.6.1.4.1.164.3.1.6.1.3.9 | Tabledot1agXCfmMepTable | not-accessible | current | The Maintenance Association End Point (MEP) table. |
| 1.3.6.1.4.1.164.3.1.6.1.3.9.1 | Rowdot1agXCfmMepEntry | not-accessible | current | The MEP table entry |
| 1.3.6.1.4.1.164.3.1.6.1.3.9.1.1 | Columndot1agXCfmMepContinuityVerMode | read-create | current | This object determines the OAM behavior of the MEP: disabled - no Continuity Verification is done cc_based - Continuity Verification is done based on incoming … |
| 1.3.6.1.4.1.164.3.1.6.1.3.9.1.2 | Columndot1agXCfmMepDestAddrType | read-create | current | This object determines if the OAM messages are sent to user defined unicast address, or to RAD proprietary multicast address. |
| 1.3.6.1.4.1.164.3.1.6.1.3.9.1.3 | Columndot1agXCfmMepDestMacAddr | read-create | current | This object determines the MAC address that OAM packets are sent to. |
| 1.3.6.1.4.1.164.3.1.6.1.3.9.1.4 | Columndot1agXCfmMepMappingProfile | read-create | current | This attribute defines the Mapping/classification profile (flowMappingProfileTable ) assigned to this Mep. |
| 1.3.6.1.4.1.164.3.1.6.1.3.10 | Tabledot1agXCfmMepDbTable | not-accessible | current | The MEP DB table |
| 1.3.6.1.4.1.164.3.1.6.1.3.10.1 | Rowdot1agXCfmMepDbEntry | not-accessible | current | The MEP Database table entry. |
| 1.3.6.1.4.1.164.3.1.6.1.3.10.1.1 | Columndot1agXCfmMepCcStat | read-only | current | This object indicates the Continuity Check (CC) status (ITU-T Y.1731, Appendix I): mismerge - A MEP detects a Mismerge condition when a CCM frame arrives with … |
| 1.3.6.1.4.1.164.3.1.6.1.4 | NodeethIfRing | |||
| 1.3.6.1.4.1.164.3.1.6.1.4.0 | NodeethIfRingEvents | |||
| 1.3.6.1.4.1.164.3.1.6.1.4.0.1 | NotificationethIfRingStatusChange | current | This trap indicates that the status of the Ethernet Ring has been changed. | |
| 1.3.6.1.4.1.164.3.1.6.1.4.1 | TableethIfRingTable | not-accessible | current | Ethernet Ring Table. |
| 1.3.6.1.4.1.164.3.1.6.1.4.1.1 | RowethIfRingEntry | not-accessible | current | An entry in the table. |
| 1.3.6.1.4.1.164.3.1.6.1.4.1.1.1 | ColumnethIfRingIdx | not-accessible | current | This object is an Index that can indicate Slot, Ring, Cnfg etc., according to the device used. When NA, 1 will be used. |
| 1.3.6.1.4.1.164.3.1.6.1.4.1.1.2 | ColumnethIfRingAdminStatus | read-write | current | This object denotes the Ethernet Ring administrative status. |
| 1.3.6.1.4.1.164.3.1.6.1.4.1.1.3 | ColumnethIfRingPorts | read-write | current | The set of ports which are assigned to be ring members. The default value of this object is a string of zeros. |
| 1.3.6.1.4.1.164.3.1.6.1.4.1.1.4 | ColumnethIfRingOperStatus | read-only | current | This object indicates the Ethernet Ring operational status. |
| 1.3.6.1.4.1.164.3.1.6.1.4.1.1.5 | ColumnethIfRingKeepAliveInterval | read-write | current | This parameter indicates the period of time (in msec.) between two consequent Keep Alive messages. |
| 1.3.6.1.4.1.164.3.1.6.1.4.1.1.6 | ColumnethIfRingKeepAliveThresh | read-write | current | This parameter indicates the maximum number of missed Keep Alive answer messages acceptable, after which link status will be failed. |
| 1.3.6.1.4.1.164.3.1.6.1.4.1.1.7 | ColumnethIfRingKeepAliveVlanId | read-write | current | Dedicated VLAN ID for keep alive messages. |
| 1.3.6.1.4.1.164.3.1.6.1.4.1.1.8 | ColumnethIfRingMultiCastVlanId | read-write | current | Dedicated VLAN ID for multicast messages. |
| 1.3.6.1.4.1.164.3.1.6.1.4.1.1.9 | ColumnethIfRingRowStatus | read-write | current | Implement creation/deletion of rings in the device. |
| 1.3.6.1.4.1.164.3.1.6.1.5 | NodeethIfStorming | |||
| 1.3.6.1.4.1.164.3.1.6.1.5.1 | TableethIfStormTable | not-accessible | current | Ethernet Storming Table. |
| 1.3.6.1.4.1.164.3.1.6.1.5.1.1 | RowethIfStormEntry | not-accessible | current | An entry in the table. |
| 1.3.6.1.4.1.164.3.1.6.1.5.1.1.1 | ColumnethIfStormCnfgIdx | not-accessible | current | This attribute indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.1.6.1.5.1.1.2 | ColumnethIfStormIfIdx | not-accessible | current | A unique index of the ethernet interface/port. |
| 1.3.6.1.4.1.164.3.1.6.1.5.1.1.3 | ColumnethIfStormDirection | not-accessible | current | This object indicates the port's Storm Direction. |
| 1.3.6.1.4.1.164.3.1.6.1.5.1.1.4 | ColumnethIfStormPacketType | not-accessible | current | Packet Type on which Storming operations will be performed. |
| 1.3.6.1.4.1.164.3.1.6.1.5.1.1.5 | ColumnethIfStormCtrlEnable | read-write | current | This object indicates if the Storm Controling is Enabled or Disabled for the relevant entry. |
| 1.3.6.1.4.1.164.3.1.6.1.5.1.1.6 | ColumnethIfStormMaxRate | read-write | current | This object indicates the Maximum Rate at which Storming packets are forwarded, in Kbps.For some devices the units are PPS(Packets Per Second ) or kilobytes pe… |
| 1.3.6.1.4.1.164.3.1.6.1.6 | NodeethIfOamEfm | |||
| 1.3.6.1.4.1.164.3.1.6.1.6.0 | Nodedot3OamEvents | |||
| 1.3.6.1.4.1.164.3.1.6.1.6.0.1 | Notificationdot3OamOperStatusChange | current | This trap is sent when OAM EFM Link goes Up or Down. Up - is considered when dot3OamOperStatus value changes to operational(9) from any other value. Down - is … | |
| 1.3.6.1.4.1.164.3.1.6.1.6.0.2 | Notificationdot3OamPeerEvent | current | This trap is sent when value of dot3OamXPeerState changes from any value to one of the following values: linkFault, dyingGasp, criticalEvent. This trap has no … | |
| 1.3.6.1.4.1.164.3.1.6.1.6.1 | Tabledot3OamDescrTable | not-accessible | current | This table supports definitions of Descriptors (profiles) of OAM EFM Links. |
| 1.3.6.1.4.1.164.3.1.6.1.6.1.1 | Rowdot3OamDescrEntry | not-accessible | current | Each entry corresponds to a single OAM EFM Descriptor (profile). Each Descriptor contains a set of OAM EFM Link configuration parameters. The configuration par… |
| 1.3.6.1.4.1.164.3.1.6.1.6.1.1.1 | Columndot3OamDescrId | not-accessible | current | This object is the unique index associated with this Descriptor (profile). Entries in this table are referenced via the object dot3OamXDescrId in dot3OamXEntry. |
| 1.3.6.1.4.1.164.3.1.6.1.6.1.1.2 | Columndot3OamDescrRowStatus | read-create | current | This object controls creation/deletion of the associated entry in this table per the semantics of RowStatus. If an active entry is referenced in dot3OamXDescrI… |
| 1.3.6.1.4.1.164.3.1.6.1.6.1.1.3 | Columndot3OamDescrMode | read-create | current | This object controls the mode of OAM operation for an Ethernet-like interface referencing this Descriptor. OAM on Ethernet interfaces may be in 'active' mode o… |
| 1.3.6.1.4.1.164.3.1.6.1.6.1.1.4 | Columndot3OamDescrLbRxOperation | read-create | current | Since OAM loopback is a disruptive operation (user traffic does not pass), this object provides a mechanism to provide control: whether received OAM loopback c… |
| 1.3.6.1.4.1.164.3.1.6.1.6.1.1.5 | Columndot3OamDescrRateLimit | read-create | current | This object defines how many OAM frames can be sent per second (maximum) for an OAM EFM Link referencing this Descriptor. |
| 1.3.6.1.4.1.164.3.1.6.1.6.2 | Tabledot3OamXTable | not-accessible | current | This table is an extension of dot3OamTable of standard DOT3-OAM-MIB. |
| 1.3.6.1.4.1.164.3.1.6.1.6.2.1 | Rowdot3OamXEntry | not-accessible | current | An entry in dot3OamXTable. |
| 1.3.6.1.4.1.164.3.1.6.1.6.2.1.1 | Columndot3OamXDescrId | read-write | current | This object points to an entry of dot3OamDescrTable (dot3OamDescrId), which defines part of the configuration parameters for this OAM EFM Link. As long as one … |
| 1.3.6.1.4.1.164.3.1.6.1.6.2.1.2 | Columndot3OamXPeerState | read-only | current | This object reports the state of the Peer of the OAM EFM Link. unknown - at the initialization of the device, or after Reset, when there is still no data about… |
| 1.3.6.1.4.1.164.3.1.6.1.7 | NodeethIfMacLayer | |||
| 1.3.6.1.4.1.164.3.1.6.1.7.0 | NodeethIfMacLayerEvents | |||
| 1.3.6.1.4.1.164.3.1.6.1.7.0.1 | NotificationethIfMacAccessViolation | current | This trap indicates that an Access Violation occurred. | |
| 1.3.6.1.4.1.164.3.1.6.1.7.1 | TableethIfSrcMacCtrlTable | not-accessible | current | This table supports source MAC addresses control parameters per interface. Source MAC control will be used mainly for security. Only packets with certain sourc… |
| 1.3.6.1.4.1.164.3.1.6.1.7.1.1 | RowethIfSrcMacCtrlEntry | not-accessible | current | An entry in the table. |
| 1.3.6.1.4.1.164.3.1.6.1.7.1.1.1 | ColumnethIfSrcMacCtrlIndex | not-accessible | current | The index of the MAC Layer interface supporting source MAC control feature. It may be the ifIndex of the ETH/Bridge Port. |
| 1.3.6.1.4.1.164.3.1.6.1.7.1.1.2 | ColumnethIfSrcMacCtrlIdx2 | not-accessible | current | A second index that can be used. For example: The VLAN ID for which the source MAC control feature is supported. When this index is not in use, its value will … |
| 1.3.6.1.4.1.164.3.1.6.1.7.1.1.3 | ColumnethIfSrcMacCtrl | read-write | current | Enable or disable the source MAC control on the current interface. The device should not enable source MAC control if for the current interface there are more … |
| 1.3.6.1.4.1.164.3.1.6.1.7.1.1.4 | ColumnethIfSrcMacCtrlMaxPermitAddr | read-write | current | This is the maximum number of permitted MAC addresses (static and learned) for the current interface. |
| 1.3.6.1.4.1.164.3.1.6.1.7.1.1.5 | ColumnethIfSrcMacCtrlCurNumPermitAddr | read-only | current | This is the number of source MAC addresses currently permitted for the current interface. |
| 1.3.6.1.4.1.164.3.1.6.1.7.1.1.6 | ColumnethIfSrcMacCtrlFlushAddrCmd | read-write | current | When set to on (3) this command will erase all the learned addresses and invalid addresses of the selected interface in the ethIfSrcMacCtrlAddrTable. After ope… |
| 1.3.6.1.4.1.164.3.1.6.1.7.1.1.7 | ColumnethIfSrcMacCtrlAging | read-write | current | The timeout period in seconds for aging out dynamically learned source MAC addresses. Valid Values: 0 - disable 10-1000000 |
| 1.3.6.1.4.1.164.3.1.6.1.7.1.1.8 | ColumnethIfSrcMacCtrlLocking | read-write | current | When set to lock (3) this command will lock the Source MAC Address learning. No more learned addresses will be added to the ethIfSrcMacCtrlAddrTable. When set … |
| 1.3.6.1.4.1.164.3.1.6.1.7.1.1.9 | ColumnethIfSrcMacCtrlViolationAction | read-write | current | Determines the action that the device will take upon security violation. drop(2) - the violating packets will be dropped. dropNotify (3)- the violating packets… |
| 1.3.6.1.4.1.164.3.1.6.1.7.1.1.10 | ColumnethIfSrcMacCtrlLastViolatingAddr | read-write | current | This object indicates the last MAC address that violated the security on the current interface. If no violation, the agent will return: 00-00-00-00-00-00 . |
| 1.3.6.1.4.1.164.3.1.6.1.7.1.1.11 | ColumnethIfSrcMacCtrlPortStatus | read-only | current | This object represents the operational status of the MAC Control feature on an interface. shutdown(2) - This indicates that the port is shutdown due to securit… |
| 1.3.6.1.4.1.164.3.1.6.1.7.2 | TableethIfSrcMacCtrlAddrTable | not-accessible | current | This table shows which MAC Addresses are permitted when the source MAC control is enabled and which non permitted MAC Addresses attempted to access the current… |
| 1.3.6.1.4.1.164.3.1.6.1.7.2.1 | RowethIfSrcMacCtrlAddrEntry | not-accessible | current | An entry in the table. |
| 1.3.6.1.4.1.164.3.1.6.1.7.2.1.1 | ColumnethIfSrcMacCtrlAddrIndex | not-accessible | current | The index of the interface for which the source MAC addresses exist in this table. It may be the ifIndex of the ETH/Bridge Port. |
| 1.3.6.1.4.1.164.3.1.6.1.7.2.1.2 | ColumnethIfSrcMacCtrlAddr | not-accessible | current | A unicast source MAC address that was learned or statically configured for the current interface. Packets with this source MAC address will be accepted by the … |
| 1.3.6.1.4.1.164.3.1.6.1.7.2.1.3 | ColumnethIfSrcMacCtrlAddrIdx3 | not-accessible | current | A third index that can be used. For example: The VLAN ID for which the source MAC control feature is supported. When this index is not in use, its value will b… |
| 1.3.6.1.4.1.164.3.1.6.1.7.2.1.4 | ColumnethIfSrcMacCtrlAddrRowStatus | read-write | current | This MIB object will be used in order to create/delete a static row or delete an address that is not allowed to access the current interface (ethIfSrcMacCtrlAd… |
| 1.3.6.1.4.1.164.3.1.6.1.7.2.1.5 | ColumnethIfSrcMacCtrlAddrStatus | read-only | current | The status of this entry. The meanings of the values are: invalid (2) - the current address is not allowed to access this interface. learned(3) - the current a… |
| 1.3.6.1.4.1.164.3.1.6.2 | NodesonetInterface | |||
| 1.3.6.1.4.1.164.3.1.6.2.0 | NodeprtSonetEvents | |||
| 1.3.6.1.4.1.164.3.1.6.2.0.1 | NotificationsonetAlarmLOS | current | This trap indicates Loss Of Signal. | |
| 1.3.6.1.4.1.164.3.1.6.2.0.2 | NotificationsonetAlarmLOF | current | This trap indicates Loss Of Frame. | |
| 1.3.6.1.4.1.164.3.1.6.2.0.3 | NotificationsonetAlarmOOF | current | This trap indicates Out Of Frame. | |
| 1.3.6.1.4.1.164.3.1.6.2.0.4 | NotificationsonetAlarmLineAIS | current | This trap indicates Line Alarm Indication Signal. | |
| 1.3.6.1.4.1.164.3.1.6.2.0.5 | NotificationsonetAlarmLineEED | current | This trap indicates Line Excessive Error Detect. | |
| 1.3.6.1.4.1.164.3.1.6.2.0.6 | NotificationsonetAlarmLineRDI | current | This trap indicates Line Remote Defect Indication. | |
| 1.3.6.1.4.1.164.3.1.6.2.0.7 | NotificationsonetAlarmLineSD | current | This trap indicates Line Signal Degrade. | |
| 1.3.6.1.4.1.164.3.1.6.2.0.8 | NotificationsonetAlarmPathLOP | current | This trap indicates Path Loss of Pointer. | |
| 1.3.6.1.4.1.164.3.1.6.2.0.9 | NotificationsonetAlarmPathAIS | current | This trap indicates Path Alarm Indication Signal. | |
| 1.3.6.1.4.1.164.3.1.6.2.0.10 | NotificationsonetAlarmPathEED | current | This trap indicates Path Excessive Error Detect. | |
| 1.3.6.1.4.1.164.3.1.6.2.0.11 | NotificationsonetAlarmPathSLM | current | This trap indicates Path Signal Label Mismatch. | |
| 1.3.6.1.4.1.164.3.1.6.2.0.12 | NotificationsonetAlarmPathLOMF | current | This trap indicates Path Loss of Multi-Frame. | |
| 1.3.6.1.4.1.164.3.1.6.2.0.13 | NotificationsonetAlarmPathRDI | current | This trap indicates Path Remote Defect Indication. | |
| 1.3.6.1.4.1.164.3.1.6.2.0.14 | NotificationsonetAlarmPathSD | current | This trap indicates Path Signal Degrade. | |
| 1.3.6.1.4.1.164.3.1.6.2.0.15 | NotificationsonetAlarmVtLOP | current | This trap indicates VT Loss of Pointer. | |
| 1.3.6.1.4.1.164.3.1.6.2.0.16 | NotificationsonetAlarmVtAIS | current | This trap indicates VT Alarm Indication Signal. | |
| 1.3.6.1.4.1.164.3.1.6.2.0.17 | NotificationsonetAlarmVtEED | current | This trap indicates VT Excessive Error Detect. | |
| 1.3.6.1.4.1.164.3.1.6.2.0.18 | NotificationsonetAlarmVtSLM | current | This trap indicates VT Signal Label Mismatch. | |
| 1.3.6.1.4.1.164.3.1.6.2.0.19 | NotificationsonetAlarmVtRDI | current | This trap indicates VT Remote Defect Indication. | |
| 1.3.6.1.4.1.164.3.1.6.2.0.20 | NotificationsonetAlarmVtSD | current | This trap indicates VT Signal Degrade. | |
| 1.3.6.1.4.1.164.3.1.6.2.1 | NodeprtSonetPerfHistory | |||
| 1.3.6.1.4.1.164.3.1.6.2.1.1 | TableprtSonetMediumTable | not-accessible | current | The SONET Medium table. |
| 1.3.6.1.4.1.164.3.1.6.2.1.1.1 | RowprtSonetMediumEntry | not-accessible | current | An entry in the SONET Medium table. ifIndex of the lowest SONET layer of type sonet(39). |
| 1.3.6.1.4.1.164.3.1.6.2.1.1.1.1 | ColumnprtSonetMediumTimeElapsed | read-only | current | The number of seconds that have elapsed since the beginning of the near end current error- measurement period. |
| 1.3.6.1.4.1.164.3.1.6.2.1.1.1.2 | ColumnprtSonetMediumValidIntervals | read-only | current | The number of previous near end intervals for which valid data was collected. The value will be 96 unless the interface was brought online within the last 24 h… |
| 1.3.6.1.4.1.164.3.1.6.2.1.1.1.3 | ColumnprtSonetMediumSsmRX | read-only | current | This parameter indicates SSM RX value (quality level of clock signal). SSM (Synchronization Status Messages) octet is encoded as follows: Bit1 = '1' - indicate… |
| 1.3.6.1.4.1.164.3.1.6.2.1.1.1.4 | ColumnprtSonetMediumSsmTX | read-only | current | This parameter indicates SSM TX value (quality level of clock signal). SSM (Synchronization Status Messages) octet is encoded the same as prtSonetMediumSsmRX. |
| 1.3.6.1.4.1.164.3.1.6.2.1.2 | TableprtSonetSectionLineCurrentTable | not-accessible | current | The SONET Section/Line Current table. |
| 1.3.6.1.4.1.164.3.1.6.2.1.2.1 | RowprtSectionLineCurrentEntry | not-accessible | current | An entry in the SONET Section/Line Current table. ifIndex of the section/line SONET layer of type sonet(39). |
| 1.3.6.1.4.1.164.3.1.6.2.1.2.1.1 | ColumnprtSonetCurrentLOS | read-only | current | The counter associated with the number of LOS seconds, encountered by a SONET interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.2.1.2.1.2 | ColumnprtSonetCurrentLOF | read-only | current | The counter associated with the number of LOF seconds, encountered by a SONET interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.2.1.2.1.3 | ColumnprtSonetCurrentLineAIS | read-only | current | The counter associated with the number of Line AIS seconds, encountered by a SONET interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.2.1.2.1.4 | ColumnprtSonetCurrentLineFERF | read-only | current | The counter associated with the number of Line FERF seconds, encountered by a SONET interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.2.1.2.1.5 | ColumnprtSonetCurrentSectionBIP | read-only | current | The counter associated with the number of Section BIP errors, encountered by a SONET interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.2.1.2.1.6 | ColumnprtSonetCurrentLineBIP | read-only | current | The counter associated with the number of Line BIP errors, encountered by a SONET interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.2.1.2.1.7 | ColumnprtSonetCurrentLineFEBE | read-only | current | The counter associated with the number of Line FEBE errors, encountered by a SONET interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.2.1.2.1.8 | ColumnprtSonetCurrentUAS | read-only | current | The counter associated with the number of UAS encountered by a SONET interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.2.1.2.1.9 | ColumnprtSonetCurrentSES | read-only | current | The counter associated with the number of SES encountered by a SONET interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.2.1.2.1.10 | ColumnprtSonetCurrentES | read-only | current | The number of Errored Seconds, encountered by a SONET interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.2.1.2.1.11 | ColumnprtSonetCurrentStatus | read-only | current | The statuses of the current interval: 0 - O.K. 1 - The link has been switched by a redundancy mechanism. 2 - Module is in/out. 4 - Empty - card is out. |
| 1.3.6.1.4.1.164.3.1.6.2.1.2.1.12 | ColumnprtSonetCurrentLSV | read-only | current | The counter associated with the number of LSV seconds (Line Symbol Violation), encountered by a SONET interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.2.1.2.1.13 | ColumnprtSonetCurrentXStatus | read-only | current | This variable indicates the Status of the interface. It contains failure state information. The variable is a bit map represented as a sum, therefore, it can r… |
| 1.3.6.1.4.1.164.3.1.6.2.1.2.1.14 | ColumnprtSonetCurrentLineRDI | read-only | current | The counter associated with the number of Line RDI seconds, encountered by a SONET interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.2.1.3 | TableprtSonetSectionLineIntervalTable | not-accessible | current | The Section/Line Interval table. |
| 1.3.6.1.4.1.164.3.1.6.2.1.3.1 | RowprtSectionLineIntervalEntry | not-accessible | current | An entry in the SONET Section/Line Interval table. ifIndex of the section/line SONET layer of type sonet(39). |
| 1.3.6.1.4.1.164.3.1.6.2.1.3.1.1 | ColumnprtSonetLineIntervalNumber | read-only | current | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that … |
| 1.3.6.1.4.1.164.3.1.6.2.1.3.1.2 | ColumnprtSonetIntervalLOS | read-only | current | The counter associated with the number of LOS seconds , encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.1.6.2.1.3.1.3 | ColumnprtSonetIntervalLOF | read-only | current | The counter associated with the number of LOF seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.1.6.2.1.3.1.4 | ColumnprtSonetIntervalLineAIS | read-only | current | The counter associated with the number of Line AIS seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.1.6.2.1.3.1.5 | ColumnprtSonetIntervalLineFERF | read-only | current | The counter associated with the number of Line FERF seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.1.6.2.1.3.1.6 | ColumnprtSonetIntervalSectionBIP | read-only | current | The counter associated with the number of Section BIP errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.1.6.2.1.3.1.7 | ColumnprtSonetIntervalLineBIP | read-only | current | The counter associated with the number of Line BIP errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.1.6.2.1.3.1.8 | ColumnprtSonetIntervalLineFEBE | read-only | current | The counter associated with the number of Line FEBE errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.1.6.2.1.3.1.9 | ColumnprtSonetIntervalUAS | read-only | current | The counter associated with the number of UAS encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.1.6.2.1.3.1.10 | ColumnprtSonetIntervalSES | read-only | current | The counter associated with the number of SES encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.1.6.2.1.3.1.11 | ColumnprtSonetIntervalES | read-only | current | The number of Errored Seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.1.6.2.1.3.1.12 | ColumnprtSonetIntervalStatus | read-only | current | The statuses of the current interval: 0 - O.K. 1 - The link has been switched by a redundancy mechanism. 2 - Module is in/out. 4 - Empty - card is out. |
| 1.3.6.1.4.1.164.3.1.6.2.1.3.1.13 | ColumnprtSonetIntervalLSV | read-only | current | The counter associated with the number of LSV seconds (Line Symbol Violation), encountered by a SONET interface in one of the previous 96, individual 15 minute… |
| 1.3.6.1.4.1.164.3.1.6.2.1.3.1.14 | ColumnprtSonetIntervalLineRDI | read-only | current | The counter associated with the number of Line RDI seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.1.6.2.1.4 | TableprtSonetPathCurrentTable | not-accessible | current | The SONET Path Current table. |
| 1.3.6.1.4.1.164.3.1.6.2.1.4.1 | RowprtPathCurrentEntry | not-accessible | current | An entry in the SONET Path Current table. ifIndex of the Path SONET layer of type sonetPath(50). |
| 1.3.6.1.4.1.164.3.1.6.2.1.4.1.1 | ColumnprtSonetCurrentPathAIS | read-only | current | The counter associated with the number of Path AIS seconds, encountered by a SONET interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.2.1.4.1.2 | ColumnprtSonetCurrentPathFERF | read-only | current | The counter associated with the number of Path FERF seconds, encountered by a SONET interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.2.1.4.1.3 | ColumnprtSonetCurrentLOP | read-only | current | The counter associated with the number LOP seconds, encountered by a SONET interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.2.1.4.1.4 | ColumnprtSonetCurrentSLM | read-only | current | The counter associated with the number of SLM seconds, encountered by a SONET interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.2.1.4.1.5 | ColumnprtSonetCurrentLOC | read-only | current | The counter associated with the number of LOC seconds, encountered by a SONET interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.2.1.4.1.6 | ColumnprtSonetCurrentPathBIP | read-only | current | The counter associated with the number of Path BIP errors, encountered by a SONET interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.2.1.4.1.7 | ColumnprtSonetCurrentPathFEBE | read-only | current | The counter associated with the number of Path FEBE errors, encountered by a SONET interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.2.1.4.1.8 | ColumnprtSonetPathCurrentStatus | read-only | current | This variable indicates the Status of the interface. It contains failure state information. The variable is a bit map represented as a sum, therefore, it can r… |
| 1.3.6.1.4.1.164.3.1.6.2.1.4.1.9 | ColumnprtSonetCurrentPathRDI | read-only | current | The counter associated with the number of Path RDI seconds, encountered by a SONET interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.2.1.5 | TableprtSonetPathIntervalTable | not-accessible | current | The Path Interval table. |
| 1.3.6.1.4.1.164.3.1.6.2.1.5.1 | RowprtPathIntervalEntry | not-accessible | current | An entry in the SONET Path Interval table. |
| 1.3.6.1.4.1.164.3.1.6.2.1.5.1.1 | ColumnprtSonetPathIntervalNumber | read-only | current | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that … |
| 1.3.6.1.4.1.164.3.1.6.2.1.5.1.2 | ColumnprtSonetIntervalPathAIS | read-only | current | The counter associated with the number of Path AIS seconds , encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.1.6.2.1.5.1.3 | ColumnprtSonetIntervalPathFERF | read-only | current | The counter associated with the number of Path FERF seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.1.6.2.1.5.1.4 | ColumnprtSonetIntervalLOP | read-only | current | The counter associated with the number of LOP seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.1.6.2.1.5.1.5 | ColumnprtSonetIntervalSLM | read-only | current | The counter associated with the number of SLM seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.1.6.2.1.5.1.6 | ColumnprtSonetIntervalLOC | read-only | current | The counter associated with the number of LOC seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.1.6.2.1.5.1.7 | ColumnprtSonetIntervalPathBIP | read-only | current | The counter associated with the number of Path BIP errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.1.6.2.1.5.1.8 | ColumnprtSonetIntervalPathFEBE | read-only | current | The counter associated with the number of Path FEBE errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.1.6.2.1.5.1.9 | ColumnprtSonetIntervalPathRDI | read-only | current | The counter associated with the number of Path RDI seconds , encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6 | NodevirtualIfStatistics | |||
| 1.3.6.1.4.1.164.3.1.6.2.1.6.1 | TablevirtualIfCurrentTable | not-accessible | current | The Virtual Interface Current table. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.1.1 | RowvirtualIfCurrentEntry | not-accessible | current | An entry in the Virtual Interface Current table. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.1 | ColumnvirtualIfCurrentMinActiveVC | read-only | current | This object holds the minimum number of active virtual containers (VCs) of the Virtual Concatenation Group in the current 15-minute interval. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.2 | ColumnvirtualIfCurrentMaxActiveVC | read-only | current | This object holds the maximum number of active virtual containers (VCs) of the Virtual Concatenation Group in the current 15-minute interval. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.3 | ColumnvirtualIfCurrentRxFrames | read-only | current | This counter is associated with the number of frames received from STS-3/STM-1 by a Virtual Interface in the current 15-minute interval. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.4 | ColumnvirtualIfCurrentTxFrames | read-only | current | This counter is associated with the number of frames transmitted to STS-3/STM-1 by a Virtual Interface in the current 15-minute interval. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.5 | ColumnvirtualIfCurrentRxAbortFrames | read-only | current | The counter associated with the number of Received Aborted frames encountered by a Virtual Interface in the current 15-minute interval. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.6 | ColumnvirtualIfCurrentTxAbortFrames | read-only | current | The counter associated with the number of Transmitted Aborted frames encountered by a Virtual Interface in the current 15-minute interval. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.7 | ColumnvirtualIfCurrentMinLengthViolation | read-only | current | This counter is associated with the number of Rx payload Min Length Violation frames encountered by a Virtual Interface in the current 15-minute interval. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.8 | ColumnvirtualIfCurrentMaxLengthViolation | read-only | current | This counter is associated with the number of Rx payload Max Length Violation frames encountered by a Virtual Interface in the current 15-minute interval. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.9 | ColumnvirtualIfCurrentFcsError | read-only | current | The counter is associated with the number of Frame Check Sequence errors encountered by a Virtual Interface in the current 15-minute interval. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.10 | ColumnvirtualIfCurrentByteDestuffingViolation | read-only | current | The counter associated with the number of Byte De-stuffing Violations encountered by a Virtual Interface in the current 15-minute interval. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.11 | ColumnvirtualIfCurrentAdressMismatch | read-only | current | The counter associated with the number of Adress Mismatch encountered by a Virtual Interface in the current 15-minute interval. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.12 | ColumnvirtualIfCurrentControlMismatch | read-only | current | The counter associated with the number of Control Mismatch encountered by a Virtual Interface in the current 15-minute interval. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.13 | ColumnvirtualIfCurrentActiveVC | read-only | current | This object holds the number of active virtual containers (VCs) of the Virtual Concatenation Group in the current 15-minute interval. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.2 | TablevirtualIfIntervalTable | not-accessible | current | The Virtual Interface Interval table. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.2.1 | RowvirtualIfIntervalEntry | not-accessible | current | An entry in the Virtual Interface Interval table. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.1 | ColumnvirtualIfIntervalNumber | not-accessible | current | A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently comple… |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.2 | ColumnvirtualIfIntervalMinActiveVC | read-only | current | This object holds the minimum number of active virtual containers (VCs) of the Virtual Concatenation Group, in a particular 15-minute interval in the past 24 h… |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.3 | ColumnvirtualIfIntervalMaxActiveVC | read-only | current | This object holds the maximum number of active virtual containers (VCs) of the Virtual Concatenation Group, in a particular 15-minute interval in the past 24 h… |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.4 | ColumnvirtualIfIntervalRxFrames | read-only | current | This counter is associated with the number of frames received from STS-3/STM-1 by a Virtual Interface in a particular 15-minute interval in the past 24 hours. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.5 | ColumnvirtualIfIntervalTxFrames | read-only | current | This counter is associated with the number of frames transmitted to STS-3/STM-1 by a Virtual Interface in a particular 15-minute interval in the past 24 hours. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.6 | ColumnvirtualIfIntervalRxAbortFrames | read-only | current | This counter is associated with the number of Received Abort frames encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.7 | ColumnvirtualIfIntervalTxAbortFrames | read-only | current | This counter is associated with the number of Transmitted Abort frames encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hou… |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.8 | ColumnvirtualIfIntervalMinLengthViolation | read-only | current | This counter is associated with the number of Rx payload Min Length Violation frames encountered by a Virtual Interface in a particular 15-minute interval in t… |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.9 | ColumnvirtualIfIntervalMaxLengthViolation | read-only | current | This counter is associated with the number of Rx payload Max Length Violation frames encountered by a Virtual Interface in a particular 15-minute interval in t… |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.10 | ColumnvirtualIfIntervalFcsError | read-only | current | This counter is associated with the number of Frame Check Sequence errors encountered by a Virtual Interface in a particular 15-minute interval in the past 24 … |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.11 | ColumnvirtualIfIntervalByteDestuffingViolation | read-only | current | This counter is associated with the number of Byte De-stuffing Violations encountered by a Virtual Interface in a particular 15-minute interval in the past 24 … |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.12 | ColumnvirtualIfIntervalAdressMismatch | read-only | current | This counter is associated with the number of Address Mismatch encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.13 | ColumnvirtualIfIntervalControlMismatch | read-only | current | This counter is associated with the number of Control mismatch encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.14 | ColumnvirtualIfIntervalBelowMinThreshold | read-only | current | This counter is associated with the number of seconds that number of active VCs was below minimum threshold defined by vcGroupCnfgNoOfVCs, encountered by Virtu… |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.3 | TablevirtualIfLAPSCurrentTable | not-accessible | current | The Virtual Interface LAPS Current table. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.3.1 | RowvirtualIfLAPSCurrentEntry | not-accessible | current | An entry in the Virtual Interface LAPS Current table. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.3.1.1 | ColumnvirtualIfLAPSCurrentSapiMismatch | read-only | current | This counter is associated with the number of received SAPI field mismatch encountered by a Virtual Interface in the current 15-minute interval. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.4 | TablevirtualIfLAPSIntervalTable | not-accessible | current | The Virtual Interface LAPS table. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.4.1 | RowvirtualIfLAPSIntervalEntry | not-accessible | current | An entry in the Virtual Interface LAPS Interval table. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.4.1.1 | ColumnvirtualIfLAPSIntervalSapiMismatch | read-only | current | This counter is associated with the number of received SAPI field mismatch encountered by a Virtual Interface in a particular 15-minute interval in the past 24… |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.5 | TablevirtualIfLAPFCurrentTable | not-accessible | current | The Virtual Interface LAPF Current table. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.5.1 | RowvirtualIfLAPFCurrentEntry | not-accessible | current | An entry in the Virtual Interface LAPF Current table. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.5.1.1 | ColumnvirtualIfLAPFCurrentNlpidMismatch | read-only | current | This counter is associated with the number of received NLPID field mismatch encountered by a Virtual Interface in the current 15-minute interval. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.5.1.2 | ColumnvirtualIfLAPFCurrentOuiMismatch | read-only | current | This counter is associated with the number of received OUI field mismatch encountered by a Virtual Interface in the current 15-minute interval. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.5.1.3 | ColumnvirtualIfLAPFCurrentPidMismatch | read-only | current | This counter is associated with the number of received PID field mismatch encountered by a Virtual Interface in the current 15-minute interval. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.5.1.4 | ColumnvirtualIfLAPFCurrentDlciMismatch | read-only | current | This counter is associated with the number of received DLCI field mismatch encountered by a Virtual Interface in the current 15-minute interval. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.5.1.5 | ColumnvirtualIfLAPFCurrentMacRxFrames | read-only | current | This counter is associated with the number of frames received from LAN by a Virtual Interface in the current 15-minute interval. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.5.1.6 | ColumnvirtualIfLAPFCurrentMacTxFrames | read-only | current | This counter is associated with the number of frames transmitted to LAN by a Virtual Interface in the current 15-minute interval. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.6 | TablevirtualIfLAPFIntervalTable | not-accessible | current | The Virtual Interface LAPF Interval table. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.6.1 | RowvirtualIfLAPFIntervalEntry | not-accessible | current | An entry in the Virtual Interface Interval table. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.6.1.1 | ColumnvirtualIfLAPFIntervalNlpidMismatch | read-only | current | This counter is associated with the number of received NLPID field mismatch encountered by a Virtual Interface in a particular 15-minute interval in the past 2… |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.6.1.2 | ColumnvirtualIfLAPFIntervalOuiMismatch | read-only | current | This counter is associated with the number of received OUI field mismatch encountered by a Virtual Interface in a particular 15-minute interval in the past 24 … |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.6.1.3 | ColumnvirtualIfLAPFIntervalPidMismatch | read-only | current | This counter is associated with the number of received PID field mismatch encountered by a Virtual Interface in a particular 15-minute interval in the past 24 … |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.6.1.4 | ColumnvirtualIfLAPFIntervalDlciMismatch | read-only | current | This counter is associated with the number of received DLCI field mismatch by a Virtual Interface in a particular 15-minute interval in the past 24 hours. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.6.1.5 | ColumnvirtualIfLAPFIntervalMacRxFrames | read-only | current | This counter is associated with the number of frames received from LAN by a Virtual Interface in a particular 15-minute interval in the past 24 hours. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.6.1.6 | ColumnvirtualIfLAPFIntervalMacTxFrames | read-only | current | This counter is associated with the number of frames transmitted to LAN encountered by a Virtual Interface in a particular 15-minute interval in the past 24 ho… |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.7 | TablevirtualIfGFPCurrentTable | not-accessible | current | The Virtual Interface GFP Current table. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.7.1 | RowvirtualIfGFPCurrentEntry | not-accessible | current | An entry in the Virtual Interface GFP Current table. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.1 | ColumnvirtualIfGFPCurrentIdleFrameError | read-only | current | This counter is associated with the number of received GFP IDLE frames that are detected to be in error, encountered by a Virtual Interface in the current 15-m… |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.2 | ColumnvirtualIfGFPCurrentCHecSbError | read-only | current | This counter is associated with the number of received GFP frames that are detected to have single-bit errors in the Core header (i.e. cHEC field) only, encoun… |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.3 | ColumnvirtualIfGFPCurrentPtiMismatch | read-only | current | This counter is associated with the number of rreceived GFP frames that are detected with a mismatch on the PTI field (i.e. value of PTI is not equal to Client… |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.4 | ColumnvirtualIfGFPCurrentExiMismatch | read-only | current | This counter is associated with the number of received GFP frames that are detected with a mismatch on the EXI field (i.e. value of EXI is not equal to NULL or… |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.5 | ColumnvirtualIfGFPCurrentUpiMismatch | read-only | current | This counter is associated with the number of received GFP frames that are detected with a mismatch on the UPI field (i.e. value of EXI is not equal to 0000000… |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.6 | ColumnvirtualIfGFPCurrentTHecSbError | read-only | current | This counter is associated with the number of received GFP frames that are detected to only have single-bit errors in the Type header (i.e. tHEC field), encoun… |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.7 | ColumnvirtualIfGFPCurrentTHecMbError | read-only | current | This counter is associated with the number of received GFP frames that are detected to only have multi-bit errors in the Type header (i.e. tHEC field), encount… |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.8 | ColumnvirtualIfGFPCurrentCidMismatch | read-only | current | This counter is associated with the number of received GFP frames that are detected to have a mismatch/unsupported value in the CID field only, encountered by … |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.9 | ColumnvirtualIfGFPCurrentEHecSbError | read-only | current | This counter is associated with the number of received GFP frames that are detected to only have single-bit errors in the Extension header (i.e. eHEC field), e… |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.10 | ColumnvirtualIfGFPCurrentEHecMbError | read-only | current | This counter is associated with the number of received GFP frames that are detected to only have single-bit errors in the Extension header (i.e. eHEC field), e… |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.8 | TablevirtualIfGFPIntervalTable | not-accessible | current | The Virtual Interface GFP Interval table. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.8.1 | RowvirtualIfGFPIntervalEntry | not-accessible | current | An entry in the Virtual Interface GFP Interval table. |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.1 | ColumnvirtualIfGFPIntervalIdleFrameError | read-only | current | This counter is associated with the number of received GFP IDLE frames that are detected to be in error, encountered by a Virtual Interface in a particular 15-… |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.2 | ColumnvirtualIfGFPIntervalCHecSbError | read-only | current | This counter is associated with the number of received GFP frames that are detected to have single-bit errors in the Core header (i.e. cHEC field) only, encoun… |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.3 | ColumnvirtualIfGFPIntervalPtiMismatch | read-only | current | This counter is associated with the number of rreceived GFP frames that are detected with a mismatch on the PTI field (i.e. value of PTI is not equal to Client… |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.4 | ColumnvirtualIfGFPIntervalExiMismatch | read-only | current | This counter is associated with the number of received GFP frames that are detected with a mismatch on the EXI field (i.e. value of EXI is not equal to NULL or… |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.5 | ColumnvirtualIfGFPIntervalUpiMismatch | read-only | current | This counter is associated with the number of received GFP frames that are detected with a mismatch on the UPI field (i.e. value of EXI is not equal to 0000000… |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.6 | ColumnvirtualIfGFPIntervalTHecSbError | read-only | current | This counter is associated with the number of received GFP frames that are detected to only have single-bit errors in the Type header (i.e. tHEC field), encoun… |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.7 | ColumnvirtualIfGFPIntervalTHecMbError | read-only | current | This counter is associated withthe number of received GFP frames that are detected to only have multi-bit errors in the Type header (i.e. tHEC field), encounte… |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.8 | ColumnvirtualIfGFPIntervalCidMismatch | read-only | current | This counter is associated with the number of received GFP frames that are detected to have a mismatch/unsupported value in the CID field only, encountered by … |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.9 | ColumnvirtualIfGFPIntervalEHecSbError | read-only | current | This counter is associated with the number of received GFP frames that are detected to only have single-bit errors in the Extension header (i.e. eHEC field), e… |
| 1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.10 | ColumnvirtualIfGFPIntervalEHecMbError | read-only | current | This counter is associated with the the number of received GFP frames that are detected to only have multi-bit errors in the Extension header (i.e. eHEC field)… |
| 1.3.6.1.4.1.164.3.1.6.2.2 | NodeprtSonetConfig | |||
| 1.3.6.1.4.1.164.3.1.6.2.2.1 | NodeprtSonetGen | |||
| 1.3.6.1.4.1.164.3.1.6.2.2.1.1 | TableprtSonetGenTable | not-accessible | current | Sonet/SDH general port configuration table. |
| 1.3.6.1.4.1.164.3.1.6.2.2.1.1.1 | RowprtSonetGenEntry | not-accessible | current | An entry in the Sonet/SDH general port configuration table. |
| 1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.1 | ColumnprtSonetGenCnfgIdx | read-only | current | This object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurati… |
| 1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.2 | ColumnprtSonetGenIdx | read-only | current | This object indicates a unique port or interface number. For numbering, see product's spec. For some products, the numbering can equal ifIndex. |
| 1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.3 | ColumnprtSonetGenSdThreshold | read-write | current | SD=Signal Degraded Threshold. Units: [10E-]. The threshold is 10E-x relative to the frequency of the data flow. x=3, 4, 5, 6, 7, 8, 9. n3= 10E-3 n4= 10E-4 n5= … |
| 1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.4 | ColumnprtSonetGenEedThreshold | read-write | current | EED=Excessive Error Defect Threshold. Units: [10E-]. The threshold is 10E-x relative to the frequency of the data flow. x=3, 4, 5, 6, 7, 8, 9. n3= 10E-3 n4= 10… |
| 1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.5 | ColumnprtSonetGenBerEnable | read-write | current | Controls the activation of the Line Ber (Bit Error Rate), means whether SD and EED threshold parameters will be enabled. |
| 1.3.6.1.4.1.164.3.1.6.2.2.2 | NodeprtSonetStm1 | |||
| 1.3.6.1.4.1.164.3.1.6.2.2.2.1 | TableprtSonetStm1Table | not-accessible | current | Sonet/SDH STM-1 port configuration table. |
| 1.3.6.1.4.1.164.3.1.6.2.2.2.1.1 | RowprtSonetStm1Entry | not-accessible | current | An entry in the Sonet/SDH STM-1 port configuration table. |
| 1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.1 | ColumnprtSonetStm1CnfgIdx | read-only | current | This object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurati… |
| 1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.2 | ColumnprtSonetStm1Idx | read-only | current | This object indicates a unique port or interface number. For numbering, see product's spec. For some products, the numbering can equal ifIndex. |
| 1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.3 | ColumnprtSonetStm1ClockSrc | read-write | current | Clock Source of the STM-1 port. lbt = Loop Back Timing. |
| 1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.4 | ColumnprtSonetStm1DccMode | read-write | current | DCC Mode. DCC=Data Communication Channel. d1ToD3 = D1-D3 bytes are used (RS=Regeneration Section). d4ToD12= D4-D12 bytes are used (MS=Multiplexing Section). d1… |
| 1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.5 | ColumnprtSonetStm1RoutingProt | read-write | current | Routing Protocol. |
| 1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.6 | ColumnprtSonetStm1MngProt | read-write | current | Management Protocol over DCC: Proprietary, PPP, Frame Relay, HDLC or LAPD over HDLC . ppp = according to STD-51 ( rfc1661/1662) |
| 1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.7 | ColumnprtSonetStm1OperationalMode | read-write | current | Operational Mode. linear - cannot be selected when there is Redundancy between the STM-1 ports. |
| 1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.8 | ColumnprtSonetStm1VoiceChannel | read-write | current | This parameter enable user to select whether voice channel will be transferred using E1 byte, E2 Byte, or not at all. |
| 1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.9 | ColumnprtSonetStm1OutputRate | read-write | current | This parameter indicates the output rate in cells/sec, which is supported per port. |
| 1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.10 | ColumnprtSonetStm1S1ProtocolClock | read-write | current | This parameter allows user to select whether to enable use of Remote Side Clock according to the Protocol passed on S1 Bit. |
| 1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.11 | ColumnprtSonetStm1GatewayRingSubnetAddress | read-write | current | This parameter defines subnet for static routing, together with prtSonetStm1GatewayRingSubnetMask |
| 1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.12 | ColumnprtSonetStm1GatewayRingSubnetMask | read-write | current | This parameter defines subnet for static routing, together with prtSonetStm1GatewayRingSubnetAddress |
| 1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.13 | ColumnprtSonetStm1MngProtDeviationType | read-write | current | This parameter is used in conjunction with prtSonetStm1MngProt to define management protocol used & type of deviation (if exist) from standard. Standard = no d… |
| 1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.14 | ColumnprtSonetStm1MngSameIpAsHost | read-write | current | This parameter indicates whether IP address used for management is same as the device IP address |
| 1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.15 | ColumnprtSonetStm1MngIpAddress | read-write | current | This parameter defines IP address for DCC management for this link, together with prtSonetStm1MngIpSubnetMask. This parameter is applicable only if prtSonetStm… |
| 1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.16 | ColumnprtSonetStm1MngIpSubnetMask | read-write | current | This parameter defines IP subnet mask for DCC management for this link, together with prtSonetStm1MngIpAddress This parameter is applicable only if prtSonetStm… |
| 1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.17 | ColumnprtSonetStm1MngDefaultGateway | read-write | current | This parameter defines default Gateway address for DCC management for this link. This parameter is applicable only if prtSonetStm1MngSameIp=no |
| 1.3.6.1.4.1.164.3.1.6.2.2.3 | NodeprtSonetVc | |||
| 1.3.6.1.4.1.164.3.1.6.2.2.3.1 | TableprtSonetVcTable | not-accessible | current | Sonet/SDH VC port configuration table. |
| 1.3.6.1.4.1.164.3.1.6.2.2.3.1.1 | RowprtSonetVcEntry | not-accessible | current | An entry in the Sonet/SDH VC port configuration table. |
| 1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.1 | ColumnprtSonetVcCnfgIdx | read-only | current | This object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurati… |
| 1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.2 | ColumnprtSonetVcIdx | read-only | current | This object indicates a unique port or interface number. For numbering, see product's spec. For some products, the numbering can equal ifIndex. |
| 1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.3 | ColumnprtSonetVcJTxPathTraceEnable | read-write | current | Enable/Disable Transmitting Jy Path Trace. y=1, 2: J1 - for VC-4 layer J2 - for VC-12 layer. |
| 1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.4 | ColumnprtSonetVcJRxPathTraceEnable | read-write | current | Enable/Disable checking Jy Path Trace. y=1, 2: J1 - for VC-4 layer J2 - for VC-12 layer. |
| 1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.5 | ColumnprtSonetVcJPathTrace | read-write | current | Jy Path Trace. y=1, 2: J1 - for VC-4 layer J2 - for VC-12 layer. This object is applicable only if one of the previous 2 objects is 'enable'. |
| 1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.6 | ColumnprtSonetVcConnect | read-write | current | Connect VCn (n - 11,12,2,3,4) port (yes/no). |
| 1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.7 | ColumnprtSonetVcSignalLabel | read-write | current | Signal Label. For VC-3: The SONET standard defines the C2 byte as the path signal label. The purpose of this byte is to communicate the payload type being enca… |
| 1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.8 | ColumnprtSonetVcPathTracePadding | read-write | current | Padding character will pad prtSonetVcJPathTrace string to fill required number of characters. |
| 1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.9 | ColumnprtSonetVcPayloadBlockOnPathTrace | read-write | current | Block payload on this VC upon PathTrace (TIM). |
| 1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.10 | ColumnprtSonetVcPayloadType | read-write | current | Payload type, applicable for STS-1/TUG-3 layer. vc1x = vc12 or vc11 for SDH, VT1.5, VT2 for SONET. clear channel - complete TUG-3 or STS-1 For Egate-100: POS (… |
| 1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.11 | ColumnprtSonetVcPathTraceSize | read-write | current | Path Trace Size in Bytes - 16 or 64. |
| 1.3.6.1.4.1.164.3.1.6.2.2.3.2 | TableprtSonetTuTable | not-accessible | current | The write operation into the Table's Objects is valid only for the TmpCnfg entry (Scratch). |
| 1.3.6.1.4.1.164.3.1.6.2.2.3.2.1 | RowprtSonetTuEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.1 | ColumnprtSonetTuCnfgIdx | read-only | current | This object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurati… |
| 1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.2 | ColumnprtSonetTuPrtIdx | read-only | current | This object indicates a unique port or interface number. For port numbering, see product's spec. For some products, the numbering can equal ifIndex. |
| 1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.3 | ColumnprtSonetTuIdx | read-only | current | This object indicates a unique TU (Tributary Unit) within VC-4. The valid TUs are 1..63. |
| 1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.4 | ColumnprtSonetTuConPrtIdx | read-only | current | This object indicates the connected port, when prtSonetTuType=connect. For port numbering, see product's spec. For some products, the numbering can equal ifInd… |
| 1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.5 | ColumnprtSonetTuType | read-create | current | The type of TU (Tributary Unit). connect - connected to one of the E1 ports. bypass - bypassed to the other VC4 port. TUs that are not connected or bypassed, w… |
| 1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.6 | ColumnprtSonetTuMode | read-create | current | TU Mode of connection. addAndDrop - Add & Drop add - Add (TU receives from the E1 ports). |
| 1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.7 | ColumnprtSonetTuRowStatus | read-create | current | Creation/Deletion of rows in the table. |
| 1.3.6.1.4.1.164.3.1.6.2.2.4 | NodeprtVcGroupCnfg | |||
| 1.3.6.1.4.1.164.3.1.6.2.2.4.1 | TablevcGroupCnfgTable | not-accessible | current | The Virtual Concatenation Group configuration table. |
| 1.3.6.1.4.1.164.3.1.6.2.2.4.1.1 | RowvcGroupCnfgEntry | not-accessible | current | An entry in the Virtual Concatenation Group configuration table. |
| 1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.1 | ColumnvcGroupCnfgIdx | not-accessible | current | This object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurati… |
| 1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.2 | ColumnvcGroupCnfgNumber | not-accessible | current | Virtual Concatenation Group Number. For FCD-155 up to eight groups are defined valid values are 1..8. For MP-4100, group ifIndex is used. |
| 1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.3 | ColumnvcGroupCnfgRowStatus | read-create | current | Creation/Deletion of rows in the table. |
| 1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.4 | ColumnvcGroupCnfgVcType | read-create | current | User may select type of SDH Virtual Containers (VC) (SONET Virtual Tributaries VT ) to be concatenated in this Virtual Concatenation Group. For SDH, values 2,3… |
| 1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.5 | ColumnvcGroupCnfgNoOfVCs | read-create | current | User may select number of Virtual Containers (VC) (SONET Virtual Tributaries VT ) to be concatenated in this Virtual Concatenation Group. Valid range for this … |
| 1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.6 | ColumnvcGroupCnfgLCAS | read-create | current | This object controls Link Capacity Adjustment Scheme (LCAS) activation. |
| 1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.7 | ColumnvcGroupCnfgEncapsulation | read-create | current | This object enables user to select encapsulation method. |
| 1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.8 | ColumnvcGroupCnfgGroupIfIndex | read-only | current | The ifIndex assigend to this group. |
| 1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.9 | ColumnvcGroupCnfgRip2 | read-create | current | This object controls RIP 2. User may select to send RIP 2 message over selected group or not |
| 1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.10 | ColumnvcGroupCnfgGfpChId | read-create | current | Generic Framing Procedure (GFP) Channel ID, Valid only when vcGroupCnfgEncapsulation = gfp (4) Valid values are 0x00 - oxFF (hex) |
| 1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.11 | ColumnvcGroupCnfgK4 | read-create | current | This object controls whether K4 byte (of Line Overhead) is used as an indication for virtual concatenation (VCAT). This object is applicable, when VCG includes… |
| 1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.12 | ColumnvcGroupCnfgExSignalLabel | read-create | current | Extended Signal Label. Relevant only when vcGroupCnfgK4 = yes(3). Agents that do not support this feature will send SIZE 0. |
| 1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.13 | ColumnvcGroupCnfgLcasMinNoOfVCs | read-create | current | Minimum number of VC's to declare alarm, in LCAS mode. Applicable only when LCAS is active (vcGroupCnfgLCAS =lcasActive) 1...63 for SDH, 1...84 for SONET 0= no… |
| 1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.14 | ColumnvcGroupCnfgLcasStatus | read-only | current | This object summarize LCAS states of all VCs in VCG: belowMinNoOfVCs - Number of VCs in Norm state is less than the minimum number of VCs (indicated by vcGroup… |
| 1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.15 | ColumnvcGroupCnfgMappingMode | read-create | current | This object define Path Protection mode for VCG. Auto - the entire mapping for Virtual Concatenation Group x is copied automatically by agent for the protectio… |
| 1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.16 | ColumnvcGroupCnfgTrafficType | read-create | current | This object allows to select traffic type for specific VCG. |
| 1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.17 | ColumnvcGroupCnfgGroupName | read-create | current | Virtual Concatenation Group (VCG) Name. String length is limited to 15 characters. |
| 1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.18 | ColumnvcGroupCnfgLoopDetection | read-create | current | VCAT Loop detecetion enabled. |
| 1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.19 | ColumnvcGroupCnfgLcasWaitToRestore | read-create | current | Time duration (in milliseconds units) waited after errors on channel stopped, before channel is reused. |
| 1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.20 | ColumnvcGroupCnfgLcasHoldOff | read-create | current | Time duration (in milliseconds units) in which errors on channel are disregarded. (Threshold) |
| 1.3.6.1.4.1.164.3.1.6.2.2.4.2 | TablevcgGfpMuxCnfgTable | not-accessible | current | The Virtual Concatenation Group GFP Mux configuration table. |
| 1.3.6.1.4.1.164.3.1.6.2.2.4.2.1 | RowvcgGfpMuxCnfgEntry | not-accessible | current | An entry in the Virtual Concatenation Group GFP Mux configuration table. |
| 1.3.6.1.4.1.164.3.1.6.2.2.4.2.1.1 | ColumnvcgGfpMuxCnfgIdx | not-accessible | current | This object indicates the Index of the configuration being accessed. Index of 255 relates to the Temporary (Scratch) coninguration. For products that support s… |
| 1.3.6.1.4.1.164.3.1.6.2.2.4.2.1.2 | ColumnvcgGfpMuxCnfgMuxNumber | not-accessible | current | Virtual Concatenation Group GFP Mux Number. Refer to device specification for definition of - maximum number of GFP-mux. - concatenation of Slot and GFP mux nu… |
| 1.3.6.1.4.1.164.3.1.6.2.2.4.2.1.3 | ColumnvcgGfpMuxCnfgRowStatus | read-create | current | Creation/Deletion of rows in the table. |
| 1.3.6.1.4.1.164.3.1.6.2.2.4.2.1.4 | ColumnvcgGfpMuxCnfgMuxName | read-create | current | Virtual Concatenation Group, GFP Mux name. |
| 1.3.6.1.4.1.164.3.1.6.2.2.4.2.1.5 | ColumnvcgGfpMuxCnfgPrimeGroup | read-create | current | Index of Virtual Concatenation Group used as Primary for the GFP mux created for FCD 155 up to 8 Virtual Concatenation Group are defined: 1 -> Virtual Concaten… |
| 1.3.6.1.4.1.164.3.1.6.2.2.4.2.1.6 | ColumnvcgGfpMuxCnfgGrpBwAlloc | read-create | current | This object indicates the allocated bandwidth (BW) to each Virtual Concatenation Group (VCG). Each nibble indicates BW percentage, in 12.5% steps, assigned to … |
| 1.3.6.1.4.1.164.3.1.6.2.2.5 | NodevirtualIfConfiguration | |||
| 1.3.6.1.4.1.164.3.1.6.2.2.5.1 | TablevirtualIfGenTable | not-accessible | current | Sonet/SDH general port configuration table. |
| 1.3.6.1.4.1.164.3.1.6.2.2.5.1.1 | RowvirtualIfGenEntry | not-accessible | current | An entry in the Sonet/SDH general port configuration table. |
| 1.3.6.1.4.1.164.3.1.6.2.2.5.1.1.1 | ColumnvirtualIfGenCnfgIdx | read-only | current | This object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurati… |
| 1.3.6.1.4.1.164.3.1.6.2.2.5.1.1.2 | ColumnvirtualIfGenIdx | read-only | current | This object indicates a unique port or interface number. For numbering, see product's spec. For some products, the numbering can equal ifIndex. |
| 1.3.6.1.4.1.164.3.1.6.2.2.5.1.1.3 | ColumnvirtualIfGenFrameFormat | read-write | current | The frame format. fcsEnabe = Frame will be sent with the FCS bits. fcsDisable = Frame will be sent without the FCS bits . |
| 1.3.6.1.4.1.164.3.1.6.2.3 | NodeprtSonetXConnect | |||
| 1.3.6.1.4.1.164.3.1.6.2.3.1 | TableprtSonetXConnectTable | not-accessible | current | The write operation into the Table's Objects is valid only for the TmpCnfg entry (Scratch). |
| 1.3.6.1.4.1.164.3.1.6.2.3.1.1 | RowprtSonetXConnectEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.6.2.3.1.1.1 | ColumnprtSonetXConnectCnfgIdx | read-only | current | This object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurati… |
| 1.3.6.1.4.1.164.3.1.6.2.3.1.1.2 | ColumnprtSonetXConnectPrtIdx | read-only | current | This object indicates a unique port or interface number. For port numbering, see product's spec. For some products, the numbering can equal ifIndex. |
| 1.3.6.1.4.1.164.3.1.6.2.3.1.1.3 | ColumnprtSonetXConnectConPrtIdx | read-only | current | This object indicates the connected port. For port numbering, see product's spec. For some products, the numbering can equal ifIndex. notApplicable - will be i… |
| 1.3.6.1.4.1.164.3.1.6.2.3.1.1.4 | ColumnprtSonetXConnectAUGIdx | read-only | current | This object indicates an AUG (Administrative Unit Group) within STM-N. The valid AUGs values are: 1 for STM-1 1...4 for STM-4, 1..16 for STM-16 and 1..64 for S… |
| 1.3.6.1.4.1.164.3.1.6.2.3.1.1.5 | ColumnprtSonetXConnectTUG3Idx | read-only | current | This object indicates a TUG-3 (Tributary Unit Group 3) within VC-4. The valid TUG3s are values are 1..3. and 255 which designates NA |
| 1.3.6.1.4.1.164.3.1.6.2.3.1.1.6 | ColumnprtSonetXConnectTUG2Idx | read-only | current | This object indicates a TUG2 (Tributary Unit Group 2 ) within VC-3. The valid TUG2's values are 1..7 and 255 which designates NA |
| 1.3.6.1.4.1.164.3.1.6.2.3.1.1.7 | ColumnprtSonetXConnectTUnIdx | read-only | current | This object indicates a TUn within TUG-2 or TUG-3 (Tributary Unit n, where n is 2, 12 or 11 within TUG-2, or 3 within TUG-3) valid values are 1 for TU-2 1 for … |
| 1.3.6.1.4.1.164.3.1.6.2.3.1.1.8 | ColumnprtSonetXConnectRowStatus | read-create | current | Creation/Deletion of rows in the table. |
| 1.3.6.1.4.1.164.3.1.6.2.3.1.1.9 | ColumnprtSonetXConnectDirection | read-create | current | TU direction of connection. rx=Drop tx=Add both = Add & Drop |
| 1.3.6.1.4.1.164.3.1.6.2.3.1.1.10 | ColumnprtSonetXConnectTuNumber | read-create | current | This object indicates which TU is used in prtSonetXConnectTUnIdx |
| 1.3.6.1.4.1.164.3.1.6.2.3.1.1.11 | ColumnprtSonetXConnectMode | read-create | current | TU Mode of connection. addAndDrop - Add & Drop bypass - bypassed to the other VC4 port. |
| 1.3.6.1.4.1.164.3.1.6.2.4 | NodeprtSonetStatus | |||
| 1.3.6.1.4.1.164.3.1.6.2.4.1 | TableprtSonetVcStatTable | not-accessible | current | VC Status Table |
| 1.3.6.1.4.1.164.3.1.6.2.4.1.1 | RowprtSonetVcStatEntry | not-accessible | current | An entry in the VC status Table. |
| 1.3.6.1.4.1.164.3.1.6.2.4.1.1.1 | ColumnprtSonetVcRxJPathTrace | read-only | current | Jy Path Trace value received from network. y=1, 2: J1 - for VC-4 layer J2 - for VC-12 layer. |
| 1.3.6.1.4.1.164.3.1.6.2.4.1.1.2 | ColumnprtSonetVcRxSignalLabel | read-only | current | Signal Label received from network. For VC-3: The SONET standard defines the C2 byte as the path signal label. The purpose of this byte is to communicate the p… |
| 1.3.6.1.4.1.164.3.1.6.2.4.1.1.3 | ColumnprtSonetVcLcasSourceState | read-only | current | Fixed - This is an indication that this end uses fixed bandwidth (non-LCAS mode) Add - This member is about to be added to the group Norm - Normal transmission… |
| 1.3.6.1.4.1.164.3.1.6.2.4.1.1.4 | ColumnprtSonetVcLcasSinkState | read-only | current | Fixed - This is an indication that this end uses fixed bandwidth (non-LCAS mode) Add - This member is about to be added to the group Norm - Normal transmission… |
| 1.3.6.1.4.1.164.3.1.6.2.4.1.1.5 | ColumnprtSonetVcStatus | read-only | current | This variable indicates the Status of the interface. It contains failure state information. The variable is a bit map represented as a sum, therefore, it can r… |
| 1.3.6.1.4.1.164.3.1.6.2.4.1.1.6 | ColumnprtSonetVcRxSeqNumber | read-only | current | This variable indeticates the LCAS Rx sequence number of this VC. |
| 1.3.6.1.4.1.164.3.1.6.2.4.1.1.7 | ColumnprtSonetVcTxSeqNumber | read-only | current | This variable indicates the LCAS Tx sequence number of this VC. |
| 1.3.6.1.4.1.164.3.1.6.2.4.1.1.8 | ColumnprtSonetVcMfiDiffDelay | read-only | current | This variable indicates time difference (based on MFI field) from the fastest channel (on which it will be 0), in miliSeconds units |
| 1.3.6.1.4.1.164.3.1.6.2.4.1.1.9 | ColumnprtSonetVcLoMF | read-only | current | This variable indicates loss of Multiframe defect. |
| 1.3.6.1.4.1.164.3.1.6.2.4.1.1.10 | ColumnprtSonetVcLoopStatus | read-only | current | This variable indicates Loop Status. |
| 1.3.6.1.4.1.164.3.1.6.2.4.1.1.11 | ColumnprtSonetVcLcasTxStateMachineStatus | read-only | current | LCAS State machine status. |
| 1.3.6.1.4.1.164.3.1.6.2.4.1.1.12 | ColumnprtSonetVcLcasRxStateMachineStatus | read-only | current | LCAS State machine status. |
| 1.3.6.1.4.1.164.3.1.6.2.4.1.1.13 | ColumnprtSonetVcMFLengthErrorCounter | read-only | current | Counts the multi-frames that had wrong length (shorter or longer) |
| 1.3.6.1.4.1.164.3.1.6.2.4.1.1.14 | ColumnprtSonetVcCntrlPktCRCErrorCounter | read-only | current | Counts Number of Control Packet CRC errors |
| 1.3.6.1.4.1.164.3.1.6.2.4.2 | TableprtSonetPathProtTable | not-accessible | current | Path Protection Monitoring Table |
| 1.3.6.1.4.1.164.3.1.6.2.4.2.1 | RowprtSonetPathProtEntry | not-accessible | current | An entry in the Path Protection monitoring Table. This table indicates for each protected interface which VCs are mapped as Working VC, which VCs are mapped as… |
| 1.3.6.1.4.1.164.3.1.6.2.4.2.1.1 | ColumnprtSonetPathProtProtectedInterface | not-accessible | current | Interface protected by path-protection, e.g. PDH (E1/T1/E3/T3) port, VCG (Virtual Concatenation Group). |
| 1.3.6.1.4.1.164.3.1.6.2.4.2.1.2 | ColumnprtSonetPathProtIdx | not-accessible | current | Runing index of entries which are mapped to a specific interface, indicated by PrtSonetPathProtProtectedInterface. e.g - multiple working VCs and protection VC… |
| 1.3.6.1.4.1.164.3.1.6.2.4.2.1.3 | ColumnprtSonetPathProtWorkingVc | read-only | current | A VC mapped to interface indicated by prtSonetPathProtProtectedInterface as working VC. The value of this object may be equal to the value of ifIndex of workin… |
| 1.3.6.1.4.1.164.3.1.6.2.4.2.1.4 | ColumnprtSonetPathProtProtectionVc | read-only | current | A VC mapped to interface indicated by prtSonetPathProtProtectedInterface as protection VC. The value of this object may be equal to the value of ifIndex of pro… |
| 1.3.6.1.4.1.164.3.1.6.2.4.2.1.5 | ColumnprtSonetPathProtActiveVc | read-only | current | This object indicates which of the path protection VCs is currently active. |
| 1.3.6.1.4.1.164.3.1.6.2.5 | NoderadAps | |||
| 1.3.6.1.4.1.164.3.1.6.2.5.0 | NoderadApsEvents | |||
| 1.3.6.1.4.1.164.3.1.6.2.5.0.1 | NotificationapsActiveChannelTrap | current | The trap is sent upon change of Active Channel of APS Group. | |
| 1.3.6.1.4.1.164.3.1.6.2.5.1 | TableradApsConfigTable | not-accessible | current | An Augment to the APS Configuration Table (apsConfigTable in APS-MIB). |
| 1.3.6.1.4.1.164.3.1.6.2.5.1.1 | RowradApsConfigEntry | not-accessible | current | An entry in the table. |
| 1.3.6.1.4.1.164.3.1.6.2.5.1.1.1 | ColumnradApsConfigClearCounters | read-create | current | Setting this object to on(3) will clear APS Counters. Upon performing this operation, the value will be automatically changed to off(2). |
| 1.3.6.1.4.1.164.3.1.6.2.5.1.1.2 | ColumnradApsConfigCommandAndStatus | read-create | current | noOp - initial state only (cannot be Set by user). clear - clearing the last performed command. Can be Set only if previous state was other than noOp or clear.… |
| 1.3.6.1.4.1.164.3.1.6.2.5.1.1.3 | ColumnradApsConfigFlipOnSD | read-create | current | Flip active channel according to SD (Signal Degradation). |
| 1.3.6.1.4.1.164.3.1.6.2.5.2 | TableradApsStatusTable | not-accessible | current | An Augment to the APS Status Table (apsStatusTable in APS-MIB). |
| 1.3.6.1.4.1.164.3.1.6.2.5.2.1 | RowradApsStatusEntry | not-accessible | current | An entry in the table. |
| 1.3.6.1.4.1.164.3.1.6.2.5.2.1.1 | ColumnradApsStatusCurrentWorkingChannel | read-only | current | This object indicates the port/interface index of the Current Working Channel. |
| 1.3.6.1.4.1.164.3.1.6.2.6 | NodevcGroupStat | |||
| 1.3.6.1.4.1.164.3.1.6.2.6.1 | TablevcGroupStatTable | not-accessible | current | Sonet/SDH VCG status table. |
| 1.3.6.1.4.1.164.3.1.6.2.6.1.1 | RowvcGroupStatEntry | not-accessible | current | An entry in the Sonet/SDH VCG gen staus table. |
| 1.3.6.1.4.1.164.3.1.6.2.6.1.1.1 | ColumnvcGroupStatRemoteChannelStatus | read-only | current | Status of remote VCG channels as received in the local station, represented by 1 bit per channel. Refer to product spec for details. |
| 1.3.6.1.4.1.164.3.1.6.3 | Nodeds3Interface | |||
| 1.3.6.1.4.1.164.3.1.6.3.1 | NodeprtDs3PerfHistory | |||
| 1.3.6.1.4.1.164.3.1.6.3.1.1 | TableprtSDs3IfTable | not-accessible | current | The DS3 interface table. |
| 1.3.6.1.4.1.164.3.1.6.3.1.1.1 | RowprtDs3IfEntry | not-accessible | current | An entry in the DS3 interface table. |
| 1.3.6.1.4.1.164.3.1.6.3.1.1.1.1 | ColumnprtDs3IfTimeElapsed | read-only | current | The number of seconds that have elapsed since the beginning of the near end current error- measurement period. |
| 1.3.6.1.4.1.164.3.1.6.3.1.1.1.2 | ColumnprtDs3IfValidIntervals | read-only | current | The number of previous near end intervals for which valid data was collected. The value will be 96 unless the interface was brought online within the last 24 h… |
| 1.3.6.1.4.1.164.3.1.6.3.1.2 | TableprtDs3CurrentTable | not-accessible | current | The DS3 Current table. |
| 1.3.6.1.4.1.164.3.1.6.3.1.2.1 | RowprtDs3CurrentEntry | not-accessible | current | An entry in the DS3 Current table. |
| 1.3.6.1.4.1.164.3.1.6.3.1.2.1.1 | ColumnprtDs3CurrentLOS | read-only | current | The counter associated with the number of LOS seconds, encountered by a DS3 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.3.1.2.1.2 | ColumnprtDs3CurrentOOF | read-only | current | The counter associated with the number of OOF seconds, encountered by a DS3 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.3.1.2.1.3 | ColumnprtDs3CurrentLOC | read-only | current | The counter associated with the number of LOC seconds, encountered by a DS3 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.3.1.2.1.4 | ColumnprtDs3CurrentAIS | read-only | current | The counter associated with the number of AIS seconds, encountered by a DS3 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.3.1.2.1.5 | ColumnprtDs3CurrentRDI | read-only | current | The counter associated with the number of RDI seconds, encountered by a DS3 interface. |
| 1.3.6.1.4.1.164.3.1.6.3.1.2.1.6 | ColumnprtDs3CurrentUAS | read-only | current | The counter associated with the number of UAS, encountered by a SONET interface. |
| 1.3.6.1.4.1.164.3.1.6.3.1.2.1.7 | ColumnprtDs3CurrentBIP | read-only | current | The counter associated with the number of BIP errors, encountered by a DS3 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.3.1.2.1.8 | ColumnprtDs3CurrentFEBE | read-only | current | The counter associated with the number of FEBE errors, encountered by a DS3 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.3.1.2.1.9 | ColumnprtDs3CurrentSLM | read-only | current | The counter associated with the number of SLM seconds, encountered by an E3 (only ) interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.3.1.2.1.10 | ColumnprtDs3CurrentSES | read-only | current | The counter associated with the number of SES encountered by a E3 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.3.1.2.1.11 | ColumnprtDs3CurrentES | read-only | current | The number of Errored Seconds, encountered by a DS3 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.3.1.2.1.12 | ColumnprtDs3CurrentBitParity | read-only | current | Bit Parity Error counter. Relevant to T3 only. |
| 1.3.6.1.4.1.164.3.1.6.3.1.2.1.13 | ColumnprtDs3CurrentPlcpLOF | read-only | current | The counter associated with the number of LOF seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals. This counter … |
| 1.3.6.1.4.1.164.3.1.6.3.1.2.1.14 | ColumnprtDs3CurrentPlcpRAI | read-only | current | Receiving Yellow/Remote Alarm Indication. This counter is relevant for PLCP (external/internal) frame types only. |
| 1.3.6.1.4.1.164.3.1.6.3.1.2.1.15 | ColumnprtDs3CurrentPlcpBIP | read-only | current | The counter associated with the number of BIP errors, encountered by a DS3 interface in the current 15 minute interval. This counter is relevant for PLCP (exte… |
| 1.3.6.1.4.1.164.3.1.6.3.1.2.1.16 | ColumnprtDs3CurrentPlcpFEBE | read-only | current | The counter associated with the number of FEBE errors, encountered by a DS3 interface in the current 15 minute interval. This counter is relevant for PLCP (ext… |
| 1.3.6.1.4.1.164.3.1.6.3.1.2.1.17 | ColumnprtDs3CurrentBPV | read-only | current | Number of BPVs (Bi-Polar Violations) , encountered by a DS3 interface in the current 15 minute interval. This object is relevant only for Electrical Line of Fo… |
| 1.3.6.1.4.1.164.3.1.6.3.1.2.1.18 | ColumnprtDs3CurrentLCE | read-only | current | Number of LCE (Link Code Errors) encountered by a DS3 interface in the current 15 minute interval. This object is relevant only for Optical Links of Fomi-E3/T3. |
| 1.3.6.1.4.1.164.3.1.6.3.1.2.1.19 | ColumnprtDs3CurrentStatus | read-only | current | The statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was… |
| 1.3.6.1.4.1.164.3.1.6.3.1.3 | TableprtDs3IntervalTable | not-accessible | current | The DS3 Interval table. |
| 1.3.6.1.4.1.164.3.1.6.3.1.3.1 | RowprtDs3IntervalEntry | not-accessible | current | An entry in the DS3 Interval table. |
| 1.3.6.1.4.1.164.3.1.6.3.1.3.1.1 | ColumnprtDs3IntervalNumber | read-only | current | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that … |
| 1.3.6.1.4.1.164.3.1.6.3.1.3.1.2 | ColumnprtDs3IntervalLOS | read-only | current | The counter associated with the number of LOS seconds , encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.1.6.3.1.3.1.3 | ColumnprtDs3IntervalOOF | read-only | current | The counter associated with the number of OOF seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.1.6.3.1.3.1.4 | ColumnprtDs3IntervalLOC | read-only | current | The counter associated with the number of LOC seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.1.6.3.1.3.1.5 | ColumnprtDs3IntervalAIS | read-only | current | The counter associated with the number of AIS seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.1.6.3.1.3.1.6 | ColumnprtDs3IntervalRDI | read-only | current | The counter associated with the number of RDI seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.1.6.3.1.3.1.7 | ColumnprtDs3IntervalUAS | read-only | current | The counter associated with the number of UAS, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.1.6.3.1.3.1.8 | ColumnprtDs3IntervalBIP | read-only | current | The counter associated with the number of BIP errors, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.1.6.3.1.3.1.9 | ColumnprtDs3IntervalFEBE | read-only | current | The counter associated with the number of FEBE errors, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.1.6.3.1.3.1.10 | ColumnprtDs3IntervalSLM | read-only | current | The counter associated with the number of SLM seconds, encountered by an E3 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.1.6.3.1.3.1.11 | ColumnprtDs3IntervalSES | read-only | current | The counter associated with the number of SES encountered by a E3 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.1.6.3.1.3.1.12 | ColumnprtDs3IntervalES | read-only | current | The number of Errored Seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.1.6.3.1.3.1.13 | ColumnprtDs3IntervalBitParity | read-only | current | Bit Parity Error counter. Relevant to T3 only. |
| 1.3.6.1.4.1.164.3.1.6.3.1.3.1.14 | ColumnprtDs3IntervalPlcpLOF | read-only | current | The counter associated with the number of LOF seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals. This counter … |
| 1.3.6.1.4.1.164.3.1.6.3.1.3.1.15 | ColumnprtDs3IntervalPlcpRAI | read-only | current | Receiving Yellow/Remote Alarm Indication. This counter is relevant for PLCP (external/internal) frame types only. |
| 1.3.6.1.4.1.164.3.1.6.3.1.3.1.16 | ColumnprtDs3IntervalPlcpBIP | read-only | current | The counter associated with the number of BIP errors, encountered by a DS3 interface in the current 15 minute interval. This counter is relevant for PLCP (exte… |
| 1.3.6.1.4.1.164.3.1.6.3.1.3.1.17 | ColumnprtDs3IntervalPlcpFEBE | read-only | current | The counter associated with the number of FEBE errors, encountered by a DS3 interface in the current 15 minute interval. This counter is relevant for PLCP (ext… |
| 1.3.6.1.4.1.164.3.1.6.3.1.3.1.18 | ColumnprtDs3IntervalBPV | read-only | current | Number of BPVs (Bi-Polar Violations) , encountered by a DS3 interface in the specified 15 minute interval. This object is relevant only for Electrical Line of … |
| 1.3.6.1.4.1.164.3.1.6.3.1.3.1.19 | ColumnprtDs3IntervalLCE | read-only | current | Number of LCE (Link Code Errors) encountered by a DS3 interface in the specified 15 minute interval. This object is relevant only for Optical Links of Fomi-E3/… |
| 1.3.6.1.4.1.164.3.1.6.3.1.3.1.20 | ColumnprtDs3IntervalStatus | read-only | current | The statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was… |
| 1.3.6.1.4.1.164.3.1.6.3.1.4 | TableprtDs3TotalTable | not-accessible | current | A list of Total entries. |
| 1.3.6.1.4.1.164.3.1.6.3.1.4.1 | RowprtDs3TotalEntry | not-accessible | current | An entry of Total table. |
| 1.3.6.1.4.1.164.3.1.6.3.1.4.1.6 | ColumnprtDs3TotalUAS | read-only | current | Number of UASs (Unavailable Seconds) , encountered by a DS3 interface in the previous 96 intervals. Invalid 15 minute intervals count as 0. |
| 1.3.6.1.4.1.164.3.1.6.3.1.4.1.17 | ColumnprtDs3TotalBPV | read-only | current | Number of BPVs (Bi-Polar Violations) , encountered by a DS3 interface in the previous 96 intervals. Invalid 15 minute intervals count as 0. |
| 1.3.6.1.4.1.164.3.1.6.3.1.4.1.18 | ColumnprtDs3TotalLCE | read-only | current | Number of LCE (Link Code Errors) encountered by a DS3 interface in the previous 96 intervals. Invalid 15 minute intervals count as 0. |
| 1.3.6.1.4.1.164.3.1.6.3.1.4.1.19 | ColumnprtDs3TotalSES | read-only | current | Number of SES (Severely Errored Seconds) encountered by a DS3 interface in the previous 96 intervals. Invalid 15 minute intervals count as 0. |
| 1.3.6.1.4.1.164.3.1.6.3.2 | Tabledsx3XConfigTable | not-accessible | current | An extension to the DS3 Configuration table. |
| 1.3.6.1.4.1.164.3.1.6.3.2.1 | Rowdsx3XConfigEntry | not-accessible | current | An entry containing additional configuration parameters. |
| 1.3.6.1.4.1.164.3.1.6.3.2.1.1 | Columndsx3AisEnable | read-write | current | Enable/ disable AIS transmit when Ethernet (for TDMoIP) line is disconnected. |
| 1.3.6.1.4.1.164.3.1.6.3.2.1.2 | Columndsx3TxClockSource | read-write | current | The source of Transmit Clock. loopTiming indicates that the recovered receive clock is used as the transmit clock. localTiming indicates that a local clock sou… |
| 1.3.6.1.4.1.164.3.1.6.3.3 | Tabledsx3MappingTable | not-accessible | current | The DS3/E3 mapping table associates DS3/E3 channels with logical or physical interfaces. For example, consider a DS3 device with 16 T1's and 1 VCG. There are 2… |
| 1.3.6.1.4.1.164.3.1.6.3.3.1 | Rowdsx3MappingEntry | not-accessible | deprecated | An entry in the DS3 mapping table. |
| 1.3.6.1.4.1.164.3.1.6.3.3.1.1 | Columndsx3MappingDs3Index | not-accessible | current | The index value which uniquely identifies the DS3/E3 interface to which this entry is applicable. This value is also equal to dsx3LineIndex used in dsx3ConfigE… |
| 1.3.6.1.4.1.164.3.1.6.3.3.1.2 | Columndsx3MappingNumber | not-accessible | current | The channel number for this entry. For RICi-16 this is the channel number 1...28. |
| 1.3.6.1.4.1.164.3.1.6.3.3.1.3 | Columndsx3MappingIfIndex | read-write | current | An index value that uniquely identifies a logical or physical interface mapped to a DS3/E3 channel. If no interface is currently using a channel, the value sho… |
| 1.3.6.1.4.1.164.3.1.6.4 | Nodeds1Interface | |||
| 1.3.6.1.4.1.164.3.1.6.4.0 | NodeprtDS1Events | |||
| 1.3.6.1.4.1.164.3.1.6.4.0.1 | Notificationds1LocalMultiframeAlarmTrap | current | This trap indicates near end (Local) Loss of Multiframe Alignment, of the user E1 interface. | |
| 1.3.6.1.4.1.164.3.1.6.4.0.2 | Notificationds1RemoteMultiframeAlarmTrap | current | This trap indicates that the far end (remote) unit, connected to the user E1 interface, reports Loss of Multiframe Alignment. | |
| 1.3.6.1.4.1.164.3.1.6.4.0.3 | Notificationds1LinkFrameSlipTrap | current | This trap indicates that a Frame Slip occurred at the user DS1 interface. This usually indicates timing problems (incorrect selection of timing reference), on … | |
| 1.3.6.1.4.1.164.3.1.6.4.0.4 | Notificationds1BpvErrorTrap | current | This trap indicates a Bipolar Violation (BPV) error has been detected at the user DS1 interface. | |
| 1.3.6.1.4.1.164.3.1.6.4.0.5 | Notificationds1ExcessiveBpvTrap | current | This trap indicates excessive number of Bipolar Violation errors (BPV) detected by the user DS1 interface | |
| 1.3.6.1.4.1.164.3.1.6.4.0.6 | Notificationds1Crc4ErrorTrap | current | This trap indicates that a frame with CRC-4 error has been detected at the user DS1 interface. | |
| 1.3.6.1.4.1.164.3.1.6.4.0.7 | Notificationds1ExcessiveErrorRatioTrap | current | This trap indicates that the error rate, detected at the user DS1 interface, on the frame synchronization bits is high, as defined by ITU-T Rec. G.732. | |
| 1.3.6.1.4.1.164.3.1.6.4.0.8 | Notificationds1RemoteSyncLossTrap | current | This trap indicates that the far-end (remote) unit, connected to user DS1 interface, reports Loss of Frame Alignment (Sync Loss). | |
| 1.3.6.1.4.1.164.3.1.6.4.0.9 | Notificationds1LocalSyncLossTrap | current | This trap indicates near end (Local) Loss of Frame Alignment failure (Sync Loss), of the user DS1 interface | |
| 1.3.6.1.4.1.164.3.1.6.4.0.10 | Notificationds1AisSyncLossTrap | current | This trap indicates near end (Local) Loss of Frame Alignment (Sync Loss), caused by the reception of AIS at the user DS1 interface. | |
| 1.3.6.1.4.1.164.3.1.6.4.0.11 | Notificationds1AisTrap | current | This trap indicates AIS being received at the user DS1 interface. | |
| 1.3.6.1.4.1.164.3.1.6.4.0.12 | Notificationds1NetworkRemoteLoopTrap | current | This trap indicates that a remote loopback has been activated, on the local uplink interface. | |
| 1.3.6.1.4.1.164.3.1.6.4.0.13 | Notificationds1RemoteLoopTrap | current | This trap indicates that a remote loopback has been activated, on the local user port. | |
| 1.3.6.1.4.1.164.3.1.6.4.0.14 | Notificationds1LocalLoopTrap | current | This trap indicates that a local loopback has been activated on the user port. | |
| 1.3.6.1.4.1.164.3.1.6.4.0.15 | Notificationds1ExcessiveFrameSlipTrap | current | This trap indicates that the number of Frame Slips detected at the user DS1 interface, during the last minute exceeds threshold. For LA-110, threshold value is… | |
| 1.3.6.1.4.1.164.3.1.6.4.0.16 | Notificationds1ExcessiveCrc4ErrorTrap | current | This trap indicates that the error rate detected on the CRC-4 bits at the user DS1 interface, is high. | |
| 1.3.6.1.4.1.164.3.1.6.4.0.17 | Notificationds1ExcessiveLocalMfAlarmTrap | current | This trap indicates that the number of local Loss of Multiframe Alignment events, detected at the user E1 interface during the last minute exceeds threshold. F… | |
| 1.3.6.1.4.1.164.3.1.6.4.0.18 | Notificationds1ExcessiveRemoteMfAlarmTrap | current | This trap indicates that the number of Loss of multiframe alignment events reported by the remote unit connected to the user E1 interface during the last minut… | |
| 1.3.6.1.4.1.164.3.1.6.4.0.19 | Notificationds1ExcessiveRemoteSyncLossTrap | current | This trap indicates that the number of far end (remote) Loss of Synchronization alarms, reported by the user DS1 interface during the last minute, exceeds thre… | |
| 1.3.6.1.4.1.164.3.1.6.4.0.20 | Notificationds1ExcessiveLocalSyncLossTrap | current | This trap indicates that the number of Loss of local Synchronization alarms reported by the user DS1 interface during the last minute, exceeds threshold. For L… | |
| 1.3.6.1.4.1.164.3.1.6.4.0.21 | Notificationds1SignalLossTrap | current | This trap indicates Signal Loss. (possible reason - cable disconnection. etc.) | |
| 1.3.6.1.4.1.164.3.1.6.4.1 | NodeprtDs1PerfHistory | |||
| 1.3.6.1.4.1.164.3.1.6.4.1.2 | Tabledsx1XCurrentTable | not-accessible | current | A list of current statistics entries. This table contains additional objects for the current table. |
| 1.3.6.1.4.1.164.3.1.6.4.1.2.1 | Rowdsx1XCurrentEntry | not-accessible | current | An entry containing additional statistical counters applicable to a particular current table. |
| 1.3.6.1.4.1.164.3.1.6.4.1.2.1.1 | Columndsx1CurrentLOS | read-only | current | The counter associated with the number of LOS seconds, encountered by a DS1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.4.1.2.1.2 | Columndsx1CurrentLOF | read-only | current | The counter associated with the number of LOF seconds, encountered by a DS1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.4.1.2.1.3 | Columndsx1CurrentLOC | read-only | current | Loss Of Cell delineation. Counts number of cells the ATM UNI cells receiver lost cells delineation . |
| 1.3.6.1.4.1.164.3.1.6.4.1.2.1.4 | Columndsx1CurrentAIS | read-only | current | The counter associated with the number of AIS seconds, encountered by a DS1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.4.1.2.1.5 | Columndsx1CurrentRAI | read-only | current | Remote Alarm Indication: Transmitted in the outgoing direction (toward the PABX) over FDL bits when the DS1 device detected an incoming Loss Of Frame. Received… |
| 1.3.6.1.4.1.164.3.1.6.4.1.2.1.6 | Columndsx1CurrentLOMF | read-only | current | Loss of Multi-Frame sequence in E1 time slot 16. |
| 1.3.6.1.4.1.164.3.1.6.4.1.2.1.7 | Columndsx1CurrentFEBE | read-only | current | Far End Block Errors, as reported in the first bit of frames 13 and 15, on multiframe E1 lines with CRC4, in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.4.1.2.1.8 | Columndsx1CurrentStatus | read-only | current | The statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was… |
| 1.3.6.1.4.1.164.3.1.6.4.1.2.1.9 | Columndsx1CurrentBPV | read-only | current | The counter associated with the number of BPVs (Bi-Polar Violations) encountered by a DS1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.4.1.2.1.10 | Columndsx1CurrentLOCRCMF | read-only | current | Loss of CRC4 Multi-Frame sequence in E1. encountered in the current 15 minute interval |
| 1.3.6.1.4.1.164.3.1.6.4.1.2.1.11 | Columndsx1CurrentLOFC | read-only | current | Counts the number of loss of frame events measured. encountered in the current 15 minute interval |
| 1.3.6.1.4.1.164.3.1.6.4.1.2.1.12 | Columndsx1CurrentCRCErrors | read-only | current | Counts the number of CRC error events, encountered in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.4.1.3 | Tabledsx1XIntervalTable | not-accessible | current | A list of Interval entries. This table contains additional objects for the interval table. |
| 1.3.6.1.4.1.164.3.1.6.4.1.3.1 | Rowdsx1XIntervalEntry | not-accessible | current | An entry containing additional statistical counters applicable to a particular interval table. |
| 1.3.6.1.4.1.164.3.1.6.4.1.3.1.1 | Columndsx1IntervalLOS | read-only | current | The counter associated with the number of LOS seconds , encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.1.6.4.1.3.1.2 | Columndsx1IntervalLOF | read-only | current | The counter associated with the number of OOF seconds, encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.1.6.4.1.3.1.3 | Columndsx1IntervalLOC | read-only | current | Loss Of Cell delineation. Counts number of cells the ATM UNI cells receiver lost cells delineation . |
| 1.3.6.1.4.1.164.3.1.6.4.1.3.1.4 | Columndsx1IntervalAIS | read-only | current | The counter associated with the number of AIS seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.1.6.4.1.3.1.5 | Columndsx1IntervalRAI | read-only | current | Remote Alarm Indication: Transmitted in the outgoing direction (toward the PABX) over FDL bits when the DS1 device detected an incoming Loss Of Frame. Received… |
| 1.3.6.1.4.1.164.3.1.6.4.1.3.1.6 | Columndsx1IntervalLOMF | read-only | current | Loss of Multi-Frame sequence in E1 time slot 16. |
| 1.3.6.1.4.1.164.3.1.6.4.1.3.1.7 | Columndsx1IntervalFEBE | read-only | current | Far End Block Errors, as reported in the first bit of frames 13 and 15, on multiframe E1 lines with CRC4, in one of the previous 96, individual, 15 minute inte… |
| 1.3.6.1.4.1.164.3.1.6.4.1.3.1.8 | Columndsx1IntervalStatus | read-only | current | The statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was… |
| 1.3.6.1.4.1.164.3.1.6.4.1.3.1.9 | Columndsx1IntervalBPV | read-only | current | The counter associated with the number of BPV (Bi-Polar Violations) encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.1.6.4.1.3.1.10 | Columndsx1IntervalLOCRCMF | read-only | current | Loss of CRC4 Multi-Frame sequence in E1. |
| 1.3.6.1.4.1.164.3.1.6.4.1.3.1.11 | Columndsx1IntervalLOFC | read-only | current | Counts the number of loss of frame events measured in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.1.6.4.1.4 | Tabledsx1XTotalTable | not-accessible | current | A list of Total statistics entries. This table contains additional objects for the Total table. |
| 1.3.6.1.4.1.164.3.1.6.4.1.4.1 | Rowdsx1XTotalEntry | not-accessible | current | An entry containing additional statistical counters applicable to a particular current table. |
| 1.3.6.1.4.1.164.3.1.6.4.1.4.1.1 | Columndsx1TotalLOS | read-only | current | The counter associated with the number of LOS (Loss of Signal) seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute inter… |
| 1.3.6.1.4.1.164.3.1.6.4.1.4.1.9 | Columndsx1TotalBPV | read-only | current | The counter associated with the number of BPV (Bi-Polar Violations) encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute interval… |
| 1.3.6.1.4.1.164.3.1.6.4.1.4.1.11 | Columndsx1TotalLOFC | read-only | current | The counter associated with the number loss of frames encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
| 1.3.6.1.4.1.164.3.1.6.4.1.5 | Tabledsx1DataStreamStatTable | not-accessible | current | The DS1 Data Stream Statistics table. |
| 1.3.6.1.4.1.164.3.1.6.4.1.5.1 | Rowdsx1DataStreamStatEntry | not-accessible | current | An entry in the DS1 Data Stream Statistics table. |
| 1.3.6.1.4.1.164.3.1.6.4.1.5.1.1 | Columndsx1DataStreamStatIfIndex | not-accessible | current | The index of the DS1 interface. It may be ifIndex. |
| 1.3.6.1.4.1.164.3.1.6.4.1.5.1.2 | Columndsx1DataStreamStatIndex | not-accessible | current | The DS1 Data Stream Index. For Vmux - the following indices are used: 1 for Transparent 2-3 for SS71-SS72 (respectively) 4-7 for Data1-Data4 (respectively) 8 f… |
| 1.3.6.1.4.1.164.3.1.6.4.1.5.1.3 | Columndsx1DataStreamStatValid | read-only | current | Indicates whether this Data Stream is valid or not. When invalid - all counters are irrelevant. |
| 1.3.6.1.4.1.164.3.1.6.4.1.5.1.4 | Columndsx1DataStreamStatInFrames | read-only | current | The counter associated with the number of received frames, encountered by the DS1 Data Stream. |
| 1.3.6.1.4.1.164.3.1.6.4.1.5.1.5 | Columndsx1DataStreamStatInBytes | read-only | current | The counter associated with the number of received bytes, encountered by the DS1 Data Stream. |
| 1.3.6.1.4.1.164.3.1.6.4.1.5.1.6 | Columndsx1DataStreamStatInDiscards | read-only | current | The counter associated with the number of Discarded incoming frames, encountered by the DS1 Data Stream. |
| 1.3.6.1.4.1.164.3.1.6.4.1.5.1.7 | Columndsx1DataStreamStatInErrors | read-only | current | The counter associated with the number of received Errored frames, encountered by the DS1 Data Stream. |
| 1.3.6.1.4.1.164.3.1.6.4.1.5.1.8 | Columndsx1DataStreamStatOutFrames | read-only | current | The counter associated with the number of transmitted frames, encountered by the DS1 Data Stream. |
| 1.3.6.1.4.1.164.3.1.6.4.1.5.1.9 | Columndsx1DataStreamStatOutBytes | read-only | current | The counter associated with the number of transmitted bytes, encountered by the DS1 Data Stream. |
| 1.3.6.1.4.1.164.3.1.6.4.1.5.1.10 | Columndsx1DataStreamStatOutDiscards | read-only | current | The counter associated with the number of Discarded outgoing frames, encountered by the DS1 Data Stream. |
| 1.3.6.1.4.1.164.3.1.6.4.1.5.1.11 | Columndsx1DataStreamStatOutErrors | read-only | current | The counter associated with the number of errored transmitted frames, encountered by the DS1 Data Stream. |
| 1.3.6.1.4.1.164.3.1.6.4.2 | Tabledsx1XConfigTable | not-accessible | current | An extension to the DS1 Configuration table. |
| 1.3.6.1.4.1.164.3.1.6.4.2.1 | Rowdsx1XConfigEntry | not-accessible | current | An entry containing additional configuration parameters. |
| 1.3.6.1.4.1.164.3.1.6.4.2.1.1 | Columndsx1IdleCode | read-write | current | Byte pattern of the data received/transmitted in the E1T1 framer idle timeslots. Valid range: (0 - FF HEX). |
| 1.3.6.1.4.1.164.3.1.6.4.2.1.2 | Columndsx1LineMode | read-write | current | T1 device operation mode. Valid for T1 only. |
| 1.3.6.1.4.1.164.3.1.6.4.2.1.3 | Columndsx1dBTxGain | read-write | current | Transmit line Gain for T1 CSU line mode. |
| 1.3.6.1.4.1.164.3.1.6.4.2.1.4 | Columndsx1RxSensitivity | read-write | current | Low Sensitivity is considered Short Haul while High Sensitivity is considered Long Haul. The actual values depend on the LIU. Examples: - E1: -12dB is consider… |
| 1.3.6.1.4.1.164.3.1.6.4.2.1.5 | Columndsx1RestoreTime | read-write | current | Used to change the sync. algorithms to reduce the time required for the port to return to normal operation after a RED alarm. 'sec1' = Fast, 'sec10' = TR-6211,… |
| 1.3.6.1.4.1.164.3.1.6.4.2.1.6 | Columndsx1TcFirstSignal | read-write | current | Trunk conditioning signal - value to be sent as a signal during the first 2.5 seconds after alarm detection. Range is 0x0..0xF. 0xFF is a NULL value. This vari… |
| 1.3.6.1.4.1.164.3.1.6.4.2.1.7 | Columndsx1TcSignal | read-write | current | Trunk conditioning signal value after alarm detection. Range is 0x1..0xF for E1, and 0x0..0xF for T1. This variable is used also for Space Signaling Code (E1 a… |
| 1.3.6.1.4.1.164.3.1.6.4.2.1.8 | Columndsx1TcPattern | read-write | current | Trunk conditioning data pattern to be sent upon a DS0 fail. Range is 0x0..0xFF. This variable used also for Out of Service Code. |
| 1.3.6.1.4.1.164.3.1.6.4.2.1.9 | Columndsx1Scramble | read-write | current | Scrambling is an operation that randomizes the bits of the payload of the ATM cell by a polynom. This operation helps with the error detection mechanism of the… |
| 1.3.6.1.4.1.164.3.1.6.4.2.1.10 | Columndsx1LineAdaptiveTimingMode | read-write | current | Enables end to end clock synchronization. Default value - off. |
| 1.3.6.1.4.1.164.3.1.6.4.2.1.11 | Columndsx1TxClockSource | read-write | current | The source of Transmit Clock. 'loopTiming' indicates that the recovered receive clock is used as the transmit clock. 'localTiming' indicates that a local clock… |
| 1.3.6.1.4.1.164.3.1.6.4.2.1.12 | Columndsx1AisEnable | read-write | current | Enable/ disable AIS transmit when Ethernet cable (for TDMoIP) is out (disconnected). |
| 1.3.6.1.4.1.164.3.1.6.4.2.1.13 | Columndsx1TsEchoCancel | read-write | current | This parameter defines for each TS whether Echo-Cancellation is on. Each bit represents one TS as follow: First octet bit'0' = TS#1, bit'7' = TS#8, .. 2nd octe… |
| 1.3.6.1.4.1.164.3.1.6.4.2.1.14 | Columndsx1EchoCancelerModule | read-only | current | This parameter indicates whether echo-cancellation module exists for this line. |
| 1.3.6.1.4.1.164.3.1.6.4.2.1.15 | Columndsx1PortFunction | read-write | current | This object determines the ATM Mode over the physical port. uni - The port will function as an ATM UNI. ces - The port will function as a CES. ima - The port w… |
| 1.3.6.1.4.1.164.3.1.6.4.2.1.16 | Columndsx1PortMultiplier | read-write | current | This object determines the data rate of each TS (Kbps units). This parameter is applicable for T1 only. |
| 1.3.6.1.4.1.164.3.1.6.4.2.1.17 | Columndsx1LeasedLine | read-write | current | This parameter defines whether Line mode is regular (non Leased Line mode) or transparent (Leased Line mode). |
| 1.3.6.1.4.1.164.3.1.6.4.2.1.18 | Columndsx1CsuLoop | read-write | current | This parameter defines where the CSU loop will be done: local - locally (by IPmux) towards the TDM device transparent - transferred to Remote Device that will … |
| 1.3.6.1.4.1.164.3.1.6.4.2.1.19 | Columndsx1ClockSource | read-write | current | This entry specifies the source from which the clock will be taken. Refer to device specification for source Index |
| 1.3.6.1.4.1.164.3.1.6.4.2.1.20 | Columndsx1OosSignal | read-write | current | This parameter defines the value to be sent as a signal after alarm detection: 'Space' = both A and B signaling bits are forced to '0' during out-of-service pe… |
| 1.3.6.1.4.1.164.3.1.6.4.2.1.21 | Columndsx1BundleNextIndex | read-only | current | This parameter indicates the Next free Bundle Index for this DS1 port. |
| 1.3.6.1.4.1.164.3.1.6.4.2.1.22 | Columndsx1CRC6CalcMode | read-write | current | This object determines the CRC6 Calculation mode. jtG704 =JT-G704 = the Japanese standard ituG704=ITU-G704 = the International standard This parameter is appli… |
| 1.3.6.1.4.1.164.3.1.6.4.2.1.23 | Columndsx1SendUponFail | read-write | current | This object determines which notification will be sent to the other side upon fail of another interface. In Ipmux14 the notification is sent upon failure of th… |
| 1.3.6.1.4.1.164.3.1.6.5 | NodehdlcMibObjects | |||
| 1.3.6.1.4.1.164.3.1.6.5.1 | TablehdlcTable | not-accessible | current | The HDLC configuration table. |
| 1.3.6.1.4.1.164.3.1.6.5.1.1 | RowhdlcEntry | not-accessible | current | Defines the contents of each line in the RAD HDLC Table. |
| 1.3.6.1.4.1.164.3.1.6.5.1.1.1 | ColumnhdlcProtocol | read-write | current | The HDLC protocol type V35 - HDLC encapsulated over V35 X21 - HDLC encapsulated over X21 RS530 - HDLC encapsulated over RS530 cisco - Compatible to Cisco HDLC … |
| 1.3.6.1.4.1.164.3.1.6.5.1.1.2 | ColumnhdlcRateResolution | read-write | current | The baud rate of the internal clock. |
| 1.3.6.1.4.1.164.3.1.6.5.1.1.3 | ColumnhdlcTxClockSource | read-write | current | The baud rate of the internal clock. |
| 1.3.6.1.4.1.164.3.1.6.5.1.1.4 | ColumnhdlcTerminalMode | read-write | current | . |
| 1.3.6.1.4.1.164.3.1.6.5.1.1.5 | ColumnhdlcLoopbackState | read-write | current | internal - All data coming from the network port is looped back external - All data comming from the line is looped back. |
| 1.3.6.1.4.1.164.3.1.6.5.1.1.6 | ColumnhdlcTxClockPolarity | read-write | current | normal - The transmitted data is sampled at the middle of bit time inverse - The transmitted data is sampled at the end of the bit time (high data rate/long ca… |
| 1.3.6.1.4.1.164.3.1.6.5.1.1.7 | ColumnhdlcFlowControl | read-write | current | Enable/Disable the CTS/RTS flow control signals. |
| 1.3.6.1.4.1.164.3.1.6.5.1.1.8 | ColumnhdlcLineRate | read-write | current | The rate values for HDLC are n*56/64Kbps, where 1<=n<=32, 64, 128 and the following values: 1544, 3088, 6176. The rate values for HSSI is nMbps, where 1<=n<=52. |
| 1.3.6.1.4.1.164.3.1.6.5.1.1.9 | ColumnhdlcRxClockMode | read-write | current | . |
| 1.3.6.1.4.1.164.3.1.6.5.1.1.10 | ColumnhdlcLOF | read-only | current | Total number of seconds the port is in Loss Of Frame state. |
| 1.3.6.1.4.1.164.3.1.6.5.1.1.11 | ColumnhdlcRxClockPolarity | read-write | current | normal - The received data is sampled at the middle of bit time inverse - The received data is sampled at the end of the bit time (high data rate/long cable). |
| 1.3.6.1.4.1.164.3.1.6.5.1.1.12 | ColumnhdlcRateCompatibility | read-write | current | This parameter defines whether limit the port HDLC rate according to the Far-End device. For exaple: limit the HDLC rate from 4000 PPS and 3000 PPS. |
| 1.3.6.1.4.1.164.3.1.6.5.2 | NodehdlcPerformance | |||
| 1.3.6.1.4.1.164.3.1.6.5.2.1 | TablehdlcCurrentTable | not-accessible | current | The HDLC Current table. |
| 1.3.6.1.4.1.164.3.1.6.5.2.1.1 | RowhdlcCurrentEntry | not-accessible | current | An entry in the HDLC Current table. |
| 1.3.6.1.4.1.164.3.1.6.5.2.1.1.1 | ColumnhdlcCurrentIfIndex | read-only | current | The index of the HDLC interface. It may be ifIndex. |
| 1.3.6.1.4.1.164.3.1.6.5.2.1.1.2 | ColumnhdlcCurrentStatus | read-only | current | The statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was… |
| 1.3.6.1.4.1.164.3.1.6.5.2.1.1.3 | ColumnhdlcCurrentLOF | read-only | current | The counter associated with the number of seconds the port is in Loss Of Frame state, encountered by the HDLC interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.5.2.1.1.4 | ColumnhdlcCurrentInFrames | read-only | current | The counter associated with the number of received frames, encountered by the HDLC interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.5.2.1.1.5 | ColumnhdlcCurrentInErrors | read-only | current | The counter associated with the number of Errored received frames, encountered by the HDLC interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.5.2.1.1.6 | ColumnhdlcCurrentOutFrames | read-only | current | The counter associated with the number of transmitted frames, encountered by the HDLC interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.5.2.1.1.7 | ColumnhdlcCurrentAbortedFrames | read-only | current | The counter associated with the number of frames, in which at least seven consecutive '1'-s (Abort sequence) were encountered by the HDLC interface in the curr… |
| 1.3.6.1.4.1.164.3.1.6.5.2.1.1.8 | ColumnhdlcCurrentLengthError | read-only | current | The counter associated with the number of received frames with length error, encountered by the HDLC interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.5.2.2 | TablehdlcIntervalTable | not-accessible | current | The HDLC Interval table. |
| 1.3.6.1.4.1.164.3.1.6.5.2.2.1 | RowhdlcIntervalEntry | not-accessible | current | An entry in the HDLC Interval table. |
| 1.3.6.1.4.1.164.3.1.6.5.2.2.1.1 | ColumnhdlcIntervalIfIndex | read-only | current | The index of the HDLC interface. It may be ifIndex. |
| 1.3.6.1.4.1.164.3.1.6.5.2.2.1.2 | ColumnhdlcIntervalNumber | read-only | current | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that … |
| 1.3.6.1.4.1.164.3.1.6.5.2.2.1.3 | ColumnhdlcIntervalStatus | read-only | current | The statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was… |
| 1.3.6.1.4.1.164.3.1.6.5.2.2.1.4 | ColumnhdlcIntervalLOF | read-only | current | The counter associated with the number of seconds the port is in Loss Of Frame state, encountered by an HDLC interface in one of the previous 96, individual 15… |
| 1.3.6.1.4.1.164.3.1.6.5.2.2.1.5 | ColumnhdlcIntervalInFrames | read-only | current | The counter associated with the number of received frames, encountered by the HDLC interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.1.6.5.2.2.1.6 | ColumnhdlcIntervalInErrors | read-only | current | The counter associated with the number of Errored received frames, encountered by the HDLC interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.1.6.5.2.2.1.7 | ColumnhdlcIntervalOutFrames | read-only | current | The counter associated with the number of transmitted frames, encountered by the HDLC interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.1.6.5.2.2.1.8 | ColumnhdlcIntervalAbortedFrames | read-only | current | The counter associated with the number of frames, in which at least seven consecutive '1'-s (Abort sequence) were encountered by the HDLC interface in one of t… |
| 1.3.6.1.4.1.164.3.1.6.5.2.2.1.9 | ColumnhdlcIntervalLengthError | read-only | current | The counter associated with the number of received frames with length error, encountered by the HDLC interface in one of the previous 96, individual 15 minute,… |
| 1.3.6.1.4.1.164.3.1.6.6 | Nodev51If | |||
| 1.3.6.1.4.1.164.3.1.6.6.0 | Identityv51IfEvents | current | The events for the V5. | |
| 1.3.6.1.4.1.164.3.1.6.6.0.1 | NotificationactiveVariantTrap | current | This trap is sent when the Active Variant of a Link is changed (that includes the case when a user performs Save to the Variant that is Active). | |
| 1.3.6.1.4.1.164.3.1.6.6.1 | Nodev51General | |||
| 1.3.6.1.4.1.164.3.1.6.6.1.1 | Nodenpl | |||
| 1.3.6.1.4.1.164.3.1.6.6.1.1.1 | ScalarnplMode | read-write | current | NPL Mode. |
| 1.3.6.1.4.1.164.3.1.6.6.1.1.2 | ScalarnplCountry | read-write | current | National Protocol Country. |
| 1.3.6.1.4.1.164.3.1.6.6.1.1.3 | ScalarnplVoicePathDuration | read-write | current | Maximum time of a voice path, in msec. |
| 1.3.6.1.4.1.164.3.1.6.6.1.1.4 | TablenplPulseTable | not-accessible | current | NPL Pulse table. This table is written directly to the agent. |
| 1.3.6.1.4.1.164.3.1.6.6.1.1.4.1 | RownplPulseEntry | not-accessible | current | An entry in table nplPulseTable. |
| 1.3.6.1.4.1.164.3.1.6.6.1.1.4.1.1 | ColumnnplPulseType | read-only | current | Pulse Type |
| 1.3.6.1.4.1.164.3.1.6.6.1.1.4.1.2 | ColumnnplPulseValid | read-write | current | Validity of the Pulse Type. |
| 1.3.6.1.4.1.164.3.1.6.6.1.1.4.1.3 | ColumnnplPulseDurationType | read-write | current | Pulse Duration Type. - If meteringPulse1 and meteringPulse2 are both 'valid', the value of this object must be different for them. - If initRinging1 and initRi… |
| 1.3.6.1.4.1.164.3.1.6.6.1.1.4.1.4 | ColumnnplPulseOnTime | read-write | current | How much time the pulse is ON, in msec. 0 is a valid value only when nplPulseValid=notValid. |
| 1.3.6.1.4.1.164.3.1.6.6.1.1.4.1.5 | ColumnnplPulseOffTime | read-write | current | How much time the pulse is OFF, in msec. |
| 1.3.6.1.4.1.164.3.1.6.6.2 | Nodev51Variant | |||
| 1.3.6.1.4.1.164.3.1.6.6.2.1 | Tablev51VarTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.1.6.6.2.1.1 | Rowv51VarEntry | not-accessible | current | An entry in table v51VarTable. |
| 1.3.6.1.4.1.164.3.1.6.6.2.1.1.1 | Columnv51VarCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg being accessed. 255 = TmpCnfg. 1 = Current Cnfg. Write is allowed only to TmpCnfg. |
| 1.3.6.1.4.1.164.3.1.6.6.2.1.1.2 | Columnv51VarSltIdx | read-only | current | Slot Index. For V5.2, this index will be the Slot of the V5.2 Master ML. |
| 1.3.6.1.4.1.164.3.1.6.6.2.1.1.3 | Columnv51VarPrtIdx | read-only | current | This attribute indicates a unique port number of the ML having V5 interface. Valid values: exPrt1 (1)..exPrt4 (4), inPrt1(101)..inPrt4(104), notApplicable(255)… |
| 1.3.6.1.4.1.164.3.1.6.6.2.1.1.4 | Columnv51VarIdx | read-only | current | Variant Id. Valid values: - for Current Cnfg: 0..127 - for Tmp Cnfg: until MP R9 : 255 only. from MP R10: 0..127. |
| 1.3.6.1.4.1.164.3.1.6.6.2.1.1.5 | Columnv51VarPstnCch | read-write | current | This object indicates which TS will be used for PSTN C channel. For V5.2 - notApplicable. |
| 1.3.6.1.4.1.164.3.1.6.6.2.1.1.6 | Columnv51VarIsdnSTypeCch | read-write | current | This object indicates which TS will be used for S-Type C channel. For V5.2 - notApplicable. |
| 1.3.6.1.4.1.164.3.1.6.6.2.1.1.7 | Columnv51VarDescription | read-write | current | This object describes the Variant. |
| 1.3.6.1.4.1.164.3.1.6.6.2.1.1.8 | Columnv51VarStatus | read-only | current | This object reports the status of an existing Variant of a link. notActive - the variant exists on this link but is not active active - the variant exists on t… |
| 1.3.6.1.4.1.164.3.1.6.6.2.1.1.9 | Columnv51VarRowStatus | read-write | current | This object enables to create new entries and delete existing entries from the table. It is applicable only from MP R10. |
| 1.3.6.1.4.1.164.3.1.6.6.2.2 | Tablev51VarCfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.1.6.6.2.2.1 | Rowv51VarCfgEntry | not-accessible | current | An entry in table v51VarCfgTable. |
| 1.3.6.1.4.1.164.3.1.6.6.2.2.1.1 | Columnv51VarCfgIndex | read-only | current | This attribute indicates the Idx of the Cnfg being accessed. 255 = TmpCnfg. 1 = Current Cnfg. |
| 1.3.6.1.4.1.164.3.1.6.6.2.2.1.2 | Columnv51VarCfgSltIdx | read-only | current | Slot Index. For V5.2, this index will be the Slot of the V5.2 Master ML. |
| 1.3.6.1.4.1.164.3.1.6.6.2.2.1.3 | Columnv51VarCfgPrtIdx | read-only | current | This attribute indicates a unique port number of the ML having V5 interface. Valid values: exPrt1 (1)..exPrt4 (4), inPrt1(101)..inPrt4(104) notApplicable(255) … |
| 1.3.6.1.4.1.164.3.1.6.6.2.2.1.4 | Columnv51VarCfgIdx | read-only | current | Variant Id. Valid values: - for Current Cnfg: 0..127 - for Tmp Cnfg: until MP R9 : 255 only. from MP R10: 0..127. |
| 1.3.6.1.4.1.164.3.1.6.6.2.2.1.5 | Columnv51VarCfgTsIdx | read-only | current | For V5.1: Time Slot index (1..31). For V5.2: Running Index (1..1320) for Address Table. |
| 1.3.6.1.4.1.164.3.1.6.6.2.2.1.6 | Columnv51VarCfgTsType | read-write | current | Time Slot Type. |
| 1.3.6.1.4.1.164.3.1.6.6.2.2.1.7 | Columnv51VarCfgPrtId | read-write | current | This object indicates the IO Port Id this TS is connected to. For V5.2, the Port Id is a concatenation of SS:PP:TS of the port connected to V5.2 Master. SS=IO … |
| 1.3.6.1.4.1.164.3.1.6.6.2.2.1.8 | Columnv51VarCfgEfL3Addr | read-write | current | This object indicates the Address of the IO port this TS is connected to. The IO port is identified according to its Address: - for ISDN ports: EF Address. Val… |
| 1.3.6.1.4.1.164.3.1.6.6.2.2.1.9 | Columnv51VarCfgFTypeCch | read-write | current | For V5.1 - this object indicates which TS will be used for F-Type C channel. notApplicable (1), ts15 (2), ts16 (3), ts31 (4) For V5.2 - this object indicates t… |
| 1.3.6.1.4.1.164.3.1.6.6.2.2.1.10 | Columnv51VarCfgPTypeCch | read-write | current | For V5.1 - This object indicates which TS will be used for P-Type C channel. notApplicable (1), ts15 (2), ts16 (3), ts31 (4) For V5.2 - this object indicates t… |
| 1.3.6.1.4.1.164.3.1.6.6.2.2.1.11 | Columnv51VarCfgConSlt | read-only | current | The Slot containing the IO port this TS is connected to. For V5.2 this object is notApplicable. |
| 1.3.6.1.4.1.164.3.1.6.6.2.2.1.12 | Columnv51VarCfgConPrt | read-only | current | The IO Port this TS is connected to. Valid values: exPrt1 (1)..exPrt12 (12), inPrt1(101)..inPrt4(104). 100=noConnect For V5.2 this object is notApplicable=255. |
| 1.3.6.1.4.1.164.3.1.6.6.2.2.1.13 | Columnv51VarCfgIoState | read-only | current | The State of the IO port this TS is connected to. This object is not applicable for v51VarCfgIndex=255=TmpCnfg. normal(2) - will be used for operating normally… |
| 1.3.6.1.4.1.164.3.1.6.6.2.2.1.14 | Columnv51VarCfgBlock | read-write | current | This object indicates if this TS will be Blocked or not and how: block - done locally blockRequest - according to external request of the telephone exchange. |
| 1.3.6.1.4.1.164.3.1.6.6.2.2.1.15 | Columnv51VarCfgExtDch | read-write | current | For V5.1: This object indicates if this TS is an ISDN D channel that comes via Bypass from a non-V5.1 ML. For V5.2: this object will be notApplicable (not supp… |
| 1.3.6.1.4.1.164.3.1.6.6.2.2.1.16 | Columnv51VarCfgExtDchSlot | read-write | current | This object is applicable only if v51VarCfgExtDch=yes(3). It indicates the Slot of the non-V5.1 ML on which the External D channel TS is defined (and is transf… |
| 1.3.6.1.4.1.164.3.1.6.6.2.2.1.17 | Columnv51VarCfgExtDchPort | read-write | current | This object is applicable only if v51VarCfgExtDch=yes(3). It indicates the Port on the Slot of 'v51VarCfgExtDchSlot' of the non-V5.1 ML on which the External D… |
| 1.3.6.1.4.1.164.3.1.6.6.2.2.1.18 | Columnv51VarCfgExtDchTs | read-write | current | This object is applicable only if v51VarCfgExtDch=yes(3). It indicates the TS on the non-V5 ML on which the External D channel TS is defined (and is transferre… |
| 1.3.6.1.4.1.164.3.1.6.6.2.2.1.19 | Columnv51VarCfgExtDchCmpr | read-write | current | For V5.1 - this object is applicable only if v51VarCfgExtDch=yes(3). It indicates if this ISDN D channel TS is Compressed or not. |
| 1.3.6.1.4.1.164.3.1.6.6.2.2.1.20 | Columnv51VarCfgExtDchRate | read-write | current | For V5.1 - this object is applicable only if v51VarCfgExtDch=yes(3). It indicates the Rate of the ISDN D channel. |
| 1.3.6.1.4.1.164.3.1.6.6.2.2.1.21 | Columnv51VarCfgExtDchStartBit | read-write | current | For V5.1 - this object is applicable only if v51VarCfgExtDch=yes(3). It indicates the Start Bit of the ISDN D channel on the TS of the non-V5.1 ML on which it … |
| 1.3.6.1.4.1.164.3.1.6.6.2.2.1.22 | Columnv51VarCfgSTypeCch | read-write | current | This object is supported only by V5.2. It indicates the Logical C Channel S Type (0..65535). 65536=not applicable. |
| 1.3.6.1.4.1.164.3.1.6.6.2.2.1.23 | Columnv51VarCfgStatus | read-write | current | This object is supported only by V5.2. It enables to create new entries and delete existing entries from the table. |
| 1.3.6.1.4.1.164.3.1.6.6.2.2.1.24 | Columnv51VarCfgV52MasterTsa | read-only | current | This object is supported only by V5.2. This will be the V5.2 Master, Switch Allocated Location. It is a concatenation of SS:PP:TS of the V5.2 Master. It indica… |
| 1.3.6.1.4.1.164.3.1.6.6.2.3 | Tablev5VarCchTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.1.6.6.2.3.1 | Rowv5VarCchEntry | not-accessible | current | An entry in table v5VarCchTable. |
| 1.3.6.1.4.1.164.3.1.6.6.2.3.1.1 | Columnv5VarCchCfgIndex | read-only | current | This attribute indicates the Idx of the Cnfg being accessed. 255 = TmpCnfg. 1 = Current Cnfg. |
| 1.3.6.1.4.1.164.3.1.6.6.2.3.1.2 | Columnv5VarCchVarIdx | read-only | current | Variant Id. Valid values: 0..127. |
| 1.3.6.1.4.1.164.3.1.6.6.2.3.1.3 | Columnv5VarCchIdx | read-only | current | C-CH Id. There are only 8 possible C-CHs per Variant. |
| 1.3.6.1.4.1.164.3.1.6.6.2.3.1.4 | Columnv5VarCchType | read-write | current | C-CH Type. |
| 1.3.6.1.4.1.164.3.1.6.6.2.3.1.5 | Columnv5VarCchPhyLinkNo | read-write | current | The Physical Link Number of the card (1..4). This object is applicable only if v51VarCchType is not 'none'. notApplicable=255. |
| 1.3.6.1.4.1.164.3.1.6.6.2.3.1.6 | Columnv5VarCchLogicalId | read-write | current | The Logical C-CH Id. (0..65535) When v51VarCchType is 'none', this object is irrelevant. |
| 1.3.6.1.4.1.164.3.1.6.6.2.3.1.7 | Columnv5VarCchTs | read-write | current | The C-CH TS. Valid values: 16, 15, 31. If v51VarCchType=primary or secondary, the value must be 16 (RO). This object is applicable only if v51VarCchType is not… |
| 1.3.6.1.4.1.164.3.1.6.6.2.3.1.8 | Columnv5VarCchPstn | read-write | current | PSTN C-CH. Only one entry can have the value 'yes'. notApplicable - when v51VarCchType is none, secondary or standby. |
| 1.3.6.1.4.1.164.3.1.6.6.2.3.1.9 | Columnv5VarCchIsdnTypes | read-write | current | ISDN Types of C-CH. This object is a sum of 2**n, where n=Bit No. and Bit is '1': Bit No. ISDN Type 0 P 1 F 2 S Bit value '1'= Yes Bit value '0'= No Example: P… |
| 1.3.6.1.4.1.164.3.1.6.6.2.4 | Tablev5VarStatTable | not-accessible | current | This is a RO table. It includes only the Active Addresses of the Active Variant, their minimal Config data and Status. |
| 1.3.6.1.4.1.164.3.1.6.6.2.4.1 | Rowv5VarStatEntry | not-accessible | current | An entry in table v5VarStatTable. |
| 1.3.6.1.4.1.164.3.1.6.6.2.4.1.1 | Columnv5VarStatIdx | not-accessible | current | Running Index (1..120). Up to 120 calls can be active at the same time on the Active Variant. |
| 1.3.6.1.4.1.164.3.1.6.6.2.4.1.2 | Columnv5VarStatPrtId | read-only | current | This object indicates the IO Port Id, the Address is connected to. The Port Id is a concatenation of SS:PP:TS of the port connected to an Address of the Active… |
| 1.3.6.1.4.1.164.3.1.6.6.2.4.1.3 | Columnv5VarStatPortType | read-only | current | Address Port Type. |
| 1.3.6.1.4.1.164.3.1.6.6.2.4.1.4 | Columnv5VarStatEfL3Addr | read-only | current | This object indicates the EF/L3 Address of the IO port this entry is connected to. The IO port is identified according to its EF/L3 Address: - for ISDN ports: … |
| 1.3.6.1.4.1.164.3.1.6.6.2.4.1.5 | Columnv5VarStatPortState | read-only | current | The State of the IO port this Address entry is connected to. The values were designed to match the relevant values of v51VarCfgIoState. |
| 1.3.6.1.4.1.164.3.1.6.6.2.4.1.6 | Columnv5VarStatMasterTsa | read-only | current | This will be the V5.2 Master Switch Allocated TSA Location. It is a concatenation of SS:PP:TS of the V5.2 Master card. It indicates which is the exact port and… |
| 1.3.6.1.4.1.164.3.1.6.6.2.4.1.7 | Columnv5VarStatCallState | read-only | current | Call State of the Address. |
| 1.3.6.1.4.1.164.3.1.6.6.3 | Nodev51Ml | |||
| 1.3.6.1.4.1.164.3.1.6.6.3.1 | Nodev51MlCmdAndStatus | |||
| 1.3.6.1.4.1.164.3.1.6.6.3.1.1 | Tablev51MlTable | not-accessible | current | Variant Command and Status table. |
| 1.3.6.1.4.1.164.3.1.6.6.3.1.1.1 | Rowv51MlEntry | not-accessible | current | An entry in table v51MlTable. |
| 1.3.6.1.4.1.164.3.1.6.6.3.1.1.1.1 | Columnv51MlSltIdx | read-only | current | Slot Index. For V5.2 this index is notApplicable. |
| 1.3.6.1.4.1.164.3.1.6.6.3.1.1.1.2 | Columnv51MlPrtIdx | read-only | current | This attribute indicates a unique port number of the ML having V5 interface. Valid values: exPrt1 (1)..exPrt4 (4), inPrt1(101)..inPrt4(104), notApplicable(255)… |
| 1.3.6.1.4.1.164.3.1.6.6.3.1.1.1.3 | Columnv51MlCurrActiveVar | read-only | current | For V5.1: the currently Active Variant Id. on this ML. For V5.2: the currently Active Variant Id. 128=none. |
| 1.3.6.1.4.1.164.3.1.6.6.3.1.1.1.4 | Columnv51MlLeActiveReqVar | read-only | current | For V5.1: the Variant Id. that the Local Exchange (LE) requested to be Active on this ML. For V5.2: the Variant Id. that the Local Exchange (LE) requested to b… |
| 1.3.6.1.4.1.164.3.1.6.6.3.1.1.1.5 | Columnv51MlProtocolState | read-only | current | Protocol State of the ML Active Variant. - sysStartUp - an Establish request arrived to the V5.1 interface. - waitForVarId - the variant and the Interface Id w… |
| 1.3.6.1.4.1.164.3.1.6.6.3.1.1.1.6 | Columnv51MlUserActiveVarReq | read-write | current | User Request to turn a certain Variant of the ML, to Active. This object specifies the Variant Id. requested by user to be Active. User's request is not always… |
| 1.3.6.1.4.1.164.3.1.6.6.3.1.1.1.7 | Columnv51MlDeleteVarReq | read-write | current | For V5.1: User Request to Delete a certain Variant of the ML. For V5.2: User Request to Delete a certain Variant This object specifies the Variant Id. requeste… |
| 1.3.6.1.4.1.164.3.1.6.6.3.1.1.1.8 | Columnv51MlSaveVariant | read-write | current | User Command to Save the TmpCnfg Variant data to a certain Variant Id of the selected ML, in Current Cnfg. The value of this object specifies the target Varian… |
| 1.3.6.1.4.1.164.3.1.6.6.3.1.1.1.9 | Columnv51MlReadVariant | read-write | current | User Command to Read data from a certain Variant Id of the selected ML, (in Current Cnfg) to the TmpCnfg. The value of this object specifies the source Variant… |
| 1.3.6.1.4.1.164.3.1.6.6.3.1.1.1.10 | Columnv51MlDeactivateVar | read-write | current | User Request to Deactivate a certain Variant of the ML. This object specifies the Variant Id. requested by user to be Deactivated. User can deactivate a varian… |
| 1.3.6.1.4.1.164.3.1.6.6.3.2 | Nodev51MlCnfg | |||
| 1.3.6.1.4.1.164.3.1.6.6.3.2.1 | Tablev51MlCnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.1.6.6.3.2.1.1 | Rowv51MlCnfgEntry | not-accessible | current | An entry in table v51MlCnfgTable. |
| 1.3.6.1.4.1.164.3.1.6.6.3.2.1.1.1 | Columnv51MlCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg being accessed. 1..10 = Current Cnfg (data will be the same for all Current Configurations) 255 = TmpCnfg. |
| 1.3.6.1.4.1.164.3.1.6.6.3.2.1.1.2 | Columnv51MlCnfgSltIdx | read-only | current | Slot Index. For V5.2 this index will be notApplicable(255). |
| 1.3.6.1.4.1.164.3.1.6.6.3.2.1.1.3 | Columnv51MlCnfgPrtIdx | read-only | current | This attribute indicates a unique port number of the ML having V5 interface. Valid values: exPrt1 (1)..exPrt4 (4), inPrt1(101)..inPrt4(104) NA=255 (for V5.2 on… |
| 1.3.6.1.4.1.164.3.1.6.6.3.2.1.1.4 | Columnv51MlCnfgIfId | read-write | current | V5.1 Interface Id. |
| 1.3.6.1.4.1.164.3.1.6.6.3.2.1.1.5 | Columnv51MlCnfgStartupMode | read-write | current | Startup Mode. |
| 1.3.6.1.4.1.164.3.1.6.6.3.2.1.1.6 | Columnv51MlCnfgReprovision | read-write | current | Reprovision Support. - no : no reprovision support (=default) - yes: reprovision is supported. |
| 1.3.6.1.4.1.164.3.1.6.6.3.2.1.1.7 | Columnv51MlCnfgUnblockIoPorts | read-write | current | Unblock IO Ports on Startup. - disabled - disable sending Unblock request on restart - enabled - request unblock of all IO ports ON RESTART (=default). |
| 1.3.6.1.4.1.164.3.1.6.6.3.2.1.1.8 | Columnv51MlCnfgRestartComplete | read-write | current | Send Restart Complete. - uponLeRestart - after receiving restart from the other side. - uponPstnProtocolAck - after receiving restart ack from PSTN protocol (=… |
| 1.3.6.1.4.1.164.3.1.6.6.3.2.1.1.9 | Columnv51MlCnfgV52Application | read-write | current | The V5.2 Application of the Mux. notApplicable - for Agents that don't support this object. none - V5.2 is not used in the Mux. endPoint - this V5.2 Applicatio… |
| 1.3.6.1.4.1.164.3.1.6.6.4 | Nodev51AccessPort | |||
| 1.3.6.1.4.1.164.3.1.6.6.4.1 | Tablev51IoCnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.1.6.6.4.1.1 | Rowv51IoCnfgEntry | not-accessible | current | An entry in table v51IoCnfgTable. |
| 1.3.6.1.4.1.164.3.1.6.6.4.1.1.1 | Columnv51IoCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg being accessed. 1..10 = Current Cnfg (data will be the same for all Current Configurations) 255 = TmpCnfg. |
| 1.3.6.1.4.1.164.3.1.6.6.4.1.1.2 | Columnv51IoCnfgSltIdx | read-only | current | Slot Index |
| 1.3.6.1.4.1.164.3.1.6.6.4.1.1.3 | Columnv51IoCnfgPrtIdx | read-only | current | This attribute indicates a unique port number of the Io having V5 interface. Valid values: exPrt1 (1)..exPrt16 (16) |
| 1.3.6.1.4.1.164.3.1.6.6.4.1.1.4 | Columnv51IoCnfgSType | read-write | current | This object indicates if S Type Signaling will be used by this ISDN port (yes/no). notApplicable - for PSTN ports. |
| 1.3.6.1.4.1.164.3.1.6.6.4.1.1.5 | Columnv51IoCnfgFType | read-write | current | This object indicates if F Type Signaling will be used by this ISDN port (yes/no). notApplicable - for PSTN ports. |
| 1.3.6.1.4.1.164.3.1.6.6.4.1.1.6 | Columnv51IoCnfgPType | read-write | current | This object indicates if P Type Signaling will be used by this ISDN port (yes/no). notApplicable - for PSTN ports. |
| 1.3.6.1.4.1.164.3.1.6.7 | Nodeip2If | |||
| 1.3.6.1.4.1.164.3.1.6.7.1 | Tableip2IfTable | not-accessible | current | Channels Configuration Table. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1 | Rowip2IfEntry | not-accessible | current | Application layer configuration per link |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.1 | Columnip2IfChannelIndex | read-only | current | The channel index, which is actualy the bundle ID. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.2 | Columnip2IfRowStatus | read-create | current | This parameter allows NMS to create/delete entries of this table. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.3 | Columnip2IfOperStatus | read-only | current | The actual link status. remoteFail - No Rx. localFail - No Tx. unavailable - No echo replay or replay with invalid code or when connection is in Test state. va… |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.4 | Columnip2IfAdminStatus | read-create | current | The desired state of the link. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.5 | Columnip2IfDestAddr | read-create | current | The destination IP address. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.6 | Columnip2IfNextHop | read-create | current | The next hop to which the frame should be sent. Default value - 0.0.0.0. Upon setting the default value the frame is sent to the default Gateway. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.7 | Columnip2IfDestPort | read-create | current | The destination Bundle at the far-end device. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.8 | Columnip2IfMacAddr | read-create | current | The Destination MAC address of the next hop or destination station. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.9 | Columnip2IfJitterBuffer | read-create | current | The maximum cell arrival jitter in 10 usec that the reassembly process will tolerate in the cell stream, without producing errors on the CBR service interface.… |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.10 | Columnip2IfTos | read-create | current | The TOS (Type of Service) value: 0..255. In Vmux-2100/110 devices versions 3.1 and up, in Vmux-210 and in Vmux-4x0: LSB 8 bits - 00 00 00 XX will be used for S… |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.11 | Columnip2IfTDMBytesInFrame | read-create | current | The number of TDM bytes to be placed in a single IP frame payload. For ip2IfTDMoIpMode = cesOverPsn this parameter indicates the number of IP frames, calculate… |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.12 | Columnip2IfVlanSupport | read-create | current | VLAN support (Tagging). no - No support to VLAN. yes - 4 VLAN bytes will be added to the frame. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.13 | Columnip2IfVlanIdentifier | read-create | current | VLAN ID. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.14 | Columnip2IfVlanFramePriority | read-create | current | VLAN Frame priority. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.15 | Columnip2IfExitPort | read-create | current | This object determines to which external port the traffic will be sent. auto - the device will decide automatically the exit port. If there is an option for Tx… |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.16 | Columnip2IfVoiceOos | read-create | current | Voice Out-Of-Service code. Valid range: (0 - FF HEX). For agents that do not support this feature, the value will always be 0. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.17 | Columnip2IfDataOos | read-create | current | Data Out-Of-Service code. Valid range: (0 - FF HEX). For agents that do not support this feature, the value will always be 0. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.18 | Columnip2IfBundleUsage | read-only | current | The Bundle Resource usage in Kbps. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.19 | Columnip2IfOAM | read-create | current | This parameter determine the OAM configuration. The LSB (Bit 0 the most right one) is used for OAM connectivity. Values: 0 = disable, 1= enable. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.20 | Columnip2IfTDMoIpMode | read-create | current | The TDMoIP Mode configuration. Static- means TS can Tx any time. dynamicLES - means TS can Tx only when line is enabled according to LES protocol. dynamicCAS -… |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.21 | Columnip2IfTimeElapsed | read-only | current | The number of seconds that have elapsed since the beginning of the current error-measurement period. If, for some reason, such as an adjustment in the system's… |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.22 | Columnip2IfValidIntervals | read-only | current | The number of previous intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which … |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.23 | Columnip2IfFarEndType | read-create | current | This object defines the type of the Far-End device. This data is important for signaling and DS0 format. For Vmux: e1 (2) value is used for a PBX in the Far En… |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.24 | Columnip2IfRdnState | read-only | current | This object defines the role this bundle plays in the redundancy scheme: none(2) - means this bundle is not part of redundancy pair. primary/ secondary - means… |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.25 | Columnip2IfSourceAddr | read-create | current | Source IP Address of the bundle. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.26 | Columnip2IfBandWidth | read-create | current | Defines the Bandwidth of the bundle. For TDM bundles - it is the Number of Time Slots in The Bundle. - For T1 the value will be: 1..24 - For E1 the value will … |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.27 | Columnip2IfMeasuredSilence | read-only | current | This object shows the percentage of Silence that was measured by the device for the current bundle in the transmitted payload. Relevant values: 0..100, 255. De… |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.28 | Columnip2IfPayloadType | read-create | current | This object defines the TDMoIP payload type. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.29 | Columnip2IfProtocolVersion | read-create | current | This object defines the TDMoIP protocol Version. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.30 | Columnip2IfTdmBackUpNextHop | read-create | current | Defines the TDM bundle default router in case there was a switch from the Primary Link (for example an ETH port) to a TDM backup Link like E1, T1 or Serial Lin… |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.31 | Columnip2IfOosTxEnable | read-create | current | This object defines whether OOS will be Transmitted. Note that for IPmux1000 the Lbit is always sent, but the OOS will be sent according to user selection in t… |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.32 | Columnip2IfConnCheckPktFrequency | read-create | current | Time in sec. between 2 Bundle Connectivity Check packets. Valid values: 0..60. 0 = Not Applicable. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.33 | Columnip2IfConnPktTimeOutCycles | read-create | current | No. of cycles the agent will send Bundle Connectivity packets without receiving a response from the remote device before declaring that the bundle connection t… |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.34 | Columnip2IfMfRelay | read-create | current | Multi Frequency Signaling Detection. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.35 | Columnip2IfTxGain | read-create | current | Transmit gain in dBm. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.36 | Columnip2IfSuperTandem | read-create | current | The Super Tandem feature provides end to end compression over multiple hops, solving the double compression problem detected in Voice compressing systems. The … |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.37 | Columnip2IfSrcPort | read-create | current | The source Bundle at the local device, this parameter used for cases where there is no match between ip2IfChannelIndex and the Source Bundle ID. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.38 | Columnip2IfModemCalls | read-create | current | This MIB object shows whether Modem Calls are enabled via the bundle. relay option (3) means that the bundle will send to the network only modulated data. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.39 | Columnip2IfMinPulseWidth | read-create | current | Indicates the minimum width in milliseconds of the MF (Multi Frequency) tone transmitted by the switch. Valid values: 45-300 msec. notApplicable=0. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.40 | Columnip2IfMinPowerLevel | read-create | current | Indicates the minimum power level in dBm of the MF (Multi Frequency) tone transmitted by the switch. Valid values: -1...-35 dBm. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.41 | Columnip2IfEchoCanceler | read-create | current | Echo canceler activation. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.42 | Columnip2IfCodingLaw | read-create | current | This attribute indicates the Method/Law for decoding/encoding the voice information. aLaw(1) is the standard Law for E1 links. uLaw(2) is the standard Law for … |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.43 | Columnip2IfCustomToneDetect | read-create | current | Custom Tone Detection (COT) is a Control operation of a 2Khz tone detector. This tone is sent between PBX devices in order to check that the line status is OK.… |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.44 | Columnip2IfCallerIdDelay | read-create | current | Time in msec between CLID (Caller ID) signal detection on the line and CLID signal transmission. The CLID must be sent between ringing signals and the value of… |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.45 | Columnip2IfConnectivityMode | read-create | current | This MIB object shows whether to send Pings or OAM frames over the bundle. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.46 | Columnip2IfClockSourceEnable | read-create | current | This MIB object defines whether this bundle can be a clock source. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.47 | Columnip2IfNetworkType | read-create | current | This MIB object defines the network over which the Bundle PSN (Packet Switching Network)is transported. In Gmux2000: ipComprHeader indicates proprietary compre… |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.48 | Columnip2IfMplsRxLabelEnable | read-create | current | This MIB object defines whether there is user defined inner (Rx.) label for this Bundle. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.49 | Columnip2IfMplsRxLabel | read-create | current | This MIB object defines the MPLS Rx. Label for this Bundle. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.50 | Columnip2IfMplsTxLabelEnable | read-create | current | This MIB object defines whether there is user defined outer (Tx.) label for this Bundle. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.51 | Columnip2IfMplsTxLabel | read-create | current | This MIB object defines the MPLS Tx. Label for this Bundle. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.52 | Columnip2IfMplsTxExpBits | read-create | current | The MPLS Network priority (EXP bits) used for this bundle. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.53 | Columnip2IfMfcSpoofing | read-create | current | This MIB object defines whether the MFC (Multi Frequency Compelled) protocol spoofing will exist in the bundle. When the MFC Spoofing is used, the Local and Re… |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.54 | Columnip2IfToneAckInterval | read-create | current | Time Interval in milli seconds from the time a Vmux sends tone/s to a local PBX until it receives an acknowledgement from this PBX. Valid values: 60...400 in s… |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.55 | Columnip2IfNextHopType | read-create | current | This MIB object defines the Bundle next Hop Address Type. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.56 | Columnip2IfNoiseLevelForVAD | read-create | current | This object defines the Level of Noise on the line, the Voice Activation Detector (VAD) will have to handle. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.57 | Columnip2IfClockPreferences | read-create | current | The Clock preferences: accurateness (2) = Accurate clock is more important than Constant Delay. constantDelay (3)= Constant Delay is more important than Accura… |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.58 | Columnip2IfConnectionMode | read-create | current | The Connection Mode: tdmOIpCe (2) = TDMOiP (CE) = Circuit Emulation. tdmOIpCv (3)= TDMOiP (CV) = Compressed Voice. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.59 | Columnip2IfRingBack | read-create | current | Enables or disable Ring Back. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.60 | Columnip2IfReversePolarity | read-create | current | Enables or disable Reverse polarity synthesis. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.61 | Columnip2IfPulseMeter | read-create | current | Enables or disable Pulse metering synthesis. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.62 | Columnip2IfPulseMeterFreq | read-create | current | Frequency of synthesized pulse metering for this bundle. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.63 | Columnip2IfPulseMeterPeriod | read-create | current | Duration of synthesized pulse metering. current values are: 100-250. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.64 | Columnip2IfOnHookDetect | read-create | current | Enables or disable immediate reaction to On-Hook bits from network in Ringing. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.65 | Columnip2IfComfortNoiseGen | read-create | current | Enable or disable Comfort Noise Generation (CNG). When this parameter is enabled and no voice payload exists on the line for some time period during the call (… |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.66 | Columnip2IfExitChannel | read-create | current | The channelized bundle that the voice bundle exits through. In Gmux2000 it is the ifIndex of the Channelized Bundle (sub-channel) that the Voice Bundle exits t… |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.67 | Columnip2IfMaxVBDModemCalls | read-create | current | Maximum VBD modem calls for this bundle. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.68 | Columnip2IfMaxRelayModemCalls | read-create | current | Maximum Relay modem calls for this bundle. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.69 | Columnip2IfCustomToneFrequency | read-create | current | This is the frequency of the Custom Tone that is sent between PBXs in order to check that the line status is OK. When the Custom Tone Detection is enabled the … |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.70 | Columnip2IfVadMethod | read-create | current | Voice Activity Detection (VAD) method. proprietary (2) - non standard VAD based only on power measurement. It is very sensitive to background noise. internalIT… |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.71 | Columnip2IfRxGain | read-create | current | Receive gain in dBm. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.72 | Columnip2IfCallerIDType | read-create | current | Caller ID Type used by the DSP for this bundle. Bellcore type is used by the American method. V.23 type is used by the European method. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.73 | Columnip2IfPeerAddrType | read-create | current | This MIB object defines the peer Address Type. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.74 | Columnip2IfVbdRate | read-create | current | Voice Band Data (VBD) rate for this bundle. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.75 | Columnip2IfDtmfDetection | read-create | current | Enable/Disable DTMF (Dual Tone Multi Frequency) detectors for this bundle. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.76 | Columnip2IfNlpCutoffLevel | read-create | current | Non Linear Processor (NLP) Cutoff Level for this bundle. This parameter is used by the echo canceller. It is the maximum absolute linear PCM amplitude of the n… |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.77 | Columnip2IfDtdErlRatioCutoffQ3 | read-create | current | The DTD ERL cutoff level is used in order to determine whether the near-end is talking or not. This parameter is used by the echo canceller when echo exists an… |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.78 | Columnip2IfCASRedundancy | read-create | current | Enable/Disable CAS signaling redundancy. This parameter is useful when there are problems with the network and applicable only for CAS signaling: E1-MF (G.732S… |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.79 | Columnip2IfBundleSensitivity | read-create | current | Denotes if the bundle is sensitive to delay in the network, or is sensitive to data errors in the network. Voice bundles are sensitive to delay; Non-voice bund… |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.80 | Columnip2IfOAMBundleIdent | read-create | current | Denotes if an OAM bundle is identified according to the Bundle Number (0x3fff), or according to the value of the first nibble in the VCCV control word sent in … |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.81 | Columnip2IfMaxTxQueue | read-create | current | Max Tx Queue buffer size, measured in msec (milliseconds). Low buffer size may cause the buffer to overflow and discard packets in case of burst of packets on … |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.82 | Columnip2IfMaxGprsTxQueue | read-create | current | Max GPRS Tx Queue buffer size, measured in msec (milliseconds). Low buffer size may cause the buffer to overflow and discard packets in case of burst of packet… |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.83 | Columnip2IfV23HD | read-create | current | This parameter shows whether V.23 Half Duplex Modem Protocol is enabled on the bundle. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.84 | Columnip2IfModemProtocolMode | read-create | current | This octet string contains the mode of each Modem Protocol used on the bundle. For each protocol one octet will be used. Octet #1 will be used for V.22 Protoco… |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.85 | Columnip2IfCdisCngDetectionTime | read-create | current | When working with CDIS (Call DIScrimination method) or CNG (Comfort Noise Generation): The time in msec that the device will detect 1100Hz & 2100Hz signals on … |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.86 | Columnip2IfSuperTandemBitMask | read-create | current | This MIB object enables controlling the Time Slot/Channel rate. Valid values: 1 - FF HEX Each BIT represents 1/8 of the TS. Example: 7E (0111 1110) means that … |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.87 | Columnip2IfVbdSwitchbackTime | read-create | current | Time in msec required for the DSP to switch back from VBD (Voice Band Data) to Voice. For Vmux: the values will be in steps of 30 msec. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.88 | Columnip2IfCallerIdTxGain | read-create | current | The gain value in dBm units used for transmitting the Caller ID signal on the bundle. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.89 | Columnip2IfCallerIdRxGain | read-create | current | The gain value in dBm units of the Caller ID signal received on the bundle. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.90 | Columnip2IfUdpMuxMethod | read-create | current | This parameter determines according to which field the multiplexing is made: srcPort (2) - multiplexing according to the UDP Source Port (Dest=0x085e). This sh… |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.91 | Columnip2IfCallerIdDetection | read-create | current | Enable/Disable Caller ID Detection for this bundle. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.92 | Columnip2IfWap | read-create | current | Enable/Disable WAP (Wireless Application Protocol) for this bundle. WAP allows users to access the internet from wireless devices. |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.93 | Columnip2IfSignalingOos | read-create | current | Out of Service code sent on signaling TimeSlot. |
| 1.3.6.1.4.1.164.3.1.6.7.2 | Scalarip2IfTDMFrameBytes | read-write | current | The number of TDM bytes to be placed in a single IP frame payload. |
| 1.3.6.1.4.1.164.3.1.6.7.3 | Scalarip2IfTosValue | read-write | current | The TOS value to write in the IP frame. |
| 1.3.6.1.4.1.164.3.1.6.7.4 | Scalarip2IfVlanTagging | read-write | current | VLAN support. no - No support to VLAN. yes - 4 VLAN bytes will be added to the frame. |
| 1.3.6.1.4.1.164.3.1.6.7.5 | Scalarip2IfVlanID | read-write | current | VLAN ID. |
| 1.3.6.1.4.1.164.3.1.6.7.6 | Scalarip2IfVlanPriority | read-write | current | Frame priority. |
| 1.3.6.1.4.1.164.3.1.6.7.7 | Tableip2IfStatTable | not-accessible | current | Channels (Bundles) Statistics Table. |
| 1.3.6.1.4.1.164.3.1.6.7.7.1 | Rowip2IfStatEntry | not-accessible | current | IP Statistics per bundle |
| 1.3.6.1.4.1.164.3.1.6.7.7.1.1 | Columnip2IfStatChIndex | read-only | current | The channel index, which is actualy the bundle ID. |
| 1.3.6.1.4.1.164.3.1.6.7.7.1.2 | Columnip2IfStatSeqErrors | read-only | current | Number of events that the sequence number of an incoming Frame causes a transition from the 'sync' state to the 'out of sequence' state. |
| 1.3.6.1.4.1.164.3.1.6.7.7.1.3 | Columnip2IfStatBufUnderflows | read-only | current | Number of events that the buffer underflows. This records the count of the number of events the Receive (Eth to TDM) buffer underflows. In the case of a contin… |
| 1.3.6.1.4.1.164.3.1.6.7.7.1.4 | Columnip2IfStatBufOverflows | read-only | current | Number of events that the buffer overflows. This records the count of the number of events the Receive (Eth to TDM) buffer overflows. |
| 1.3.6.1.4.1.164.3.1.6.7.7.1.5 | Columnip2IfStatTxOnTimeInterval | read-only | current | Number of frames that were transmitted due to time interval elapse. The user can choose to Tx the Frame when it reaches the Max size or when the packetizing ti… |
| 1.3.6.1.4.1.164.3.1.6.7.7.1.6 | Columnip2IfStatTxOnMaxSize | read-only | current | Number of frames that were transmitted due to reaching max. frame size. The user can choose to Tx the Frame when it reaches the Max size or when the packetizin… |
| 1.3.6.1.4.1.164.3.1.6.7.7.1.7 | Columnip2IfStatRxSignaling | read-only | current | Number of signaling frames that were received. |
| 1.3.6.1.4.1.164.3.1.6.7.7.1.8 | Columnip2IfStatRxVoice | read-only | current | Number of voice frames that were received. |
| 1.3.6.1.4.1.164.3.1.6.7.7.1.9 | Columnip2IfStatRxHdlc | read-only | current | Number of HDLC frames that were received. |
| 1.3.6.1.4.1.164.3.1.6.7.7.1.10 | Columnip2IfStatTxSignaling | read-only | current | Number of signaling frames that were transmitted. |
| 1.3.6.1.4.1.164.3.1.6.7.7.1.11 | Columnip2IfStatTxVoice | read-only | current | Number of voice frames that were transmitted. |
| 1.3.6.1.4.1.164.3.1.6.7.7.1.12 | Columnip2IfStatTxHdlc | read-only | current | Number of HDLC frames that were transmitted. |
| 1.3.6.1.4.1.164.3.1.6.7.7.1.13 | Columnip2IfStatRdnFlip | read-only | current | Number of redundancy flips occured. This parameter counts only flips from this bundle to the other bundle in the redundancy couple. |
| 1.3.6.1.4.1.164.3.1.6.7.7.1.14 | Columnip2IfFarEndTdmStatus | read-only | current | This variable indicates the Status of the Far-End TDM Line. It contains failure state information. The variable is a bit map represented as a sum, therefore, i… |
| 1.3.6.1.4.1.164.3.1.6.7.7.1.15 | Columnip2IfStatPsnTxFrames | read-only | current | Number of frames that were transmitted to PSN. |
| 1.3.6.1.4.1.164.3.1.6.7.7.1.16 | Columnip2IfStatPsnRxFrames | read-only | current | Number of frames that were recieved from PSN. |
| 1.3.6.1.4.1.164.3.1.6.7.7.1.17 | Columnip2IfStatMinJittBufLevel | read-only | current | The Minimum jitter buffer level (in msec). |
| 1.3.6.1.4.1.164.3.1.6.7.7.1.18 | Columnip2IfStatMaxJittBufLevel | read-only | current | The Maximum jitter buffer level (in msec). |
| 1.3.6.1.4.1.164.3.1.6.7.7.1.19 | Columnip2IfStatRecommendedJittBufSize | read-only | current | The Recommended jitter buffer Size (in msec). 0= not applicable. |
| 1.3.6.1.4.1.164.3.1.6.7.7.1.20 | Columnip2IfStatPsnSeqErrors | read-only | current | Number of times that the sequence number of an incoming Frame indicates Loss of Frame or Out of order occured in PSN. |
| 1.3.6.1.4.1.164.3.1.6.7.7.1.21 | Columnip2IfStatPsnReorderFrames | read-only | current | Number of times that Frames had been reordered in PSN. |
| 1.3.6.1.4.1.164.3.1.6.7.7.1.22 | Columnip2IfStatMinRoundTripDelay | read-only | current | The minimum Round Trip delay (in msec). 0= not applicable. |
| 1.3.6.1.4.1.164.3.1.6.7.7.1.23 | Columnip2IfStatMaxRoundTripDelay | read-only | current | The maximum Round Trip delay (in msec). 0= not applicable. |
| 1.3.6.1.4.1.164.3.1.6.7.7.1.24 | Columnip2IfStatAvrRoundTripDelay | read-only | current | The avarage Round Trip delay (in msec). 0= not applicable. |
| 1.3.6.1.4.1.164.3.1.6.7.7.1.25 | Columnip2IfStatFrameTrackDupDrop | read-only | current | The number of packets dropped due to being duplicated. (duplicated packet means a packet that has the same sequential number as a packet being received previou… |
| 1.3.6.1.4.1.164.3.1.6.7.7.1.26 | Columnip2IfStatFrameTrackMissing | read-only | current | The number of packets that are missing. (Missing packet means an expected packet- according to the current sequential number - that was not received). |
| 1.3.6.1.4.1.164.3.1.6.7.7.1.27 | Columnip2IfStatFrameTrackLongSerMiss | read-only | current | The longest series of consecutive missing sequential numbers. Missing sequential numbers represent missing packets that was expected to be received successivel… |
| 1.3.6.1.4.1.164.3.1.6.7.7.1.28 | Columnip2IfStatTxMeasuredSilence | read-only | current | This object shows the percentage of Silence that was measured by the device for the current bundle in the transmitted payload. Relevant values: 0..100, 255. De… |
| 1.3.6.1.4.1.164.3.1.6.7.7.1.29 | Columnip2IfStatRxMeasuredSilence | read-only | current | This object shows the percentage of Silence that was measured by the device for the current bundle in the received payload. Relevant values: 0..100, 255. Defau… |
| 1.3.6.1.4.1.164.3.1.6.7.7.1.30 | Columnip2IfStatHdlcCrcErr | read-only | current | This counter indicates the number of received HDLC frames with CRC errors. |
| 1.3.6.1.4.1.164.3.1.6.7.7.1.31 | Columnip2IfStatHdlcAlignErr | read-only | current | This counter indicates the number of received HDLC frames with alignment errors. |
| 1.3.6.1.4.1.164.3.1.6.7.7.1.32 | Columnip2IfStatHdlcOversize | read-only | current | This counter indicates the number of received HDLC frames longer than 1470. |
| 1.3.6.1.4.1.164.3.1.6.7.7.1.33 | Columnip2IfStatHdlcUndersize | read-only | current | This counter indicates the number of received HDLC frames shorter than 4. |
| 1.3.6.1.4.1.164.3.1.6.7.7.1.34 | Columnip2IfStatHdlcAbort | read-only | current | This counter indicates the number of received HDLC frames with abort indication. |
| 1.3.6.1.4.1.164.3.1.6.7.7.1.35 | Columnip2IfStatRxCorrectFrames | read-only | current | Number of received correct frames. |
| 1.3.6.1.4.1.164.3.1.6.7.7.1.36 | Columnip2IfStatHdlcErroredFrames | read-only | current | Number of received errored HDLC frames. |
| 1.3.6.1.4.1.164.3.1.6.7.8 | Scalarip2IfRateLimit | read-write | current | The maximum rate permitted to transfer via the network portin Mbps. |
| 1.3.6.1.4.1.164.3.1.6.7.9 | Tableip2IfPortTable | not-accessible | current | Port Table. |
| 1.3.6.1.4.1.164.3.1.6.7.9.1 | Rowip2IfPortEntry | not-accessible | current | Application layer configuration per Port |
| 1.3.6.1.4.1.164.3.1.6.7.9.1.1 | Columnip2IfPortIndex | read-only | current | The Port index, which is actualy the ifIndex. |
| 1.3.6.1.4.1.164.3.1.6.7.9.1.2 | Columnip2IfPortUsage | read-only | current | This parameter indicates the usage of the port (percents). |
| 1.3.6.1.4.1.164.3.1.6.7.9.1.3 | Columnip2IfPortMask | read-write | current | This parameter defines whether Agent will mask port's alarms and statistics or not. |
| 1.3.6.1.4.1.164.3.1.6.7.9.1.4 | Columnip2IfPortTotalThroughput | read-only | current | This parameter indicates the total Throughput of the port in bps. |
| 1.3.6.1.4.1.164.3.1.6.7.10 | Tableip2IfCurrentStatTable | not-accessible | current | Channels (Bundles) Current Statistics Table. |
| 1.3.6.1.4.1.164.3.1.6.7.10.1 | Rowip2IfCurrentStatEntry | not-accessible | current | IP Current Statistics per bundle |
| 1.3.6.1.4.1.164.3.1.6.7.10.1.1 | Columnip2IfCurrentStatSeqErrors | read-only | current | Number of seconds that the sequence number of an incoming Frame causes a transition from the 'sync' state to the 'out of sequence' state in the current interva… |
| 1.3.6.1.4.1.164.3.1.6.7.10.1.2 | Columnip2IfCurrentStatBufUnderflows | read-only | current | Number of seconds that the buffer underflows in the current interval. This records the count of the number of seconds the Receive (Eth to TDM) buffer underflow… |
| 1.3.6.1.4.1.164.3.1.6.7.10.1.3 | Columnip2IfCurrentStatBufOverflows | read-only | current | Number of seconds that the buffer overflows in the current interval. This records the count of the number of seonds the Receive (Eth to TDM) buffer overflows i… |
| 1.3.6.1.4.1.164.3.1.6.7.10.1.4 | Columnip2IfCurrentStatMaxDelayVar | read-only | current | The maximum deviation from the center of the buffer (in msec) for the current interval. |
| 1.3.6.1.4.1.164.3.1.6.7.10.1.5 | Columnip2IfCurrentStatMinJittBufLevel | read-only | current | The Minimum jitter buffer level (in msec) for the current interval. |
| 1.3.6.1.4.1.164.3.1.6.7.10.1.6 | Columnip2IfCurrentStatMaxJittBufLevel | read-only | current | The Maximum jitter buffer level (in msec) for the current interval. |
| 1.3.6.1.4.1.164.3.1.6.7.10.1.7 | Columnip2IfCurrentStatTxErrFrameSec | read-only | current | The number of seconds in which errored frames were transmitted during the current interval. The error may be one of the following: CRC error, Alignment error, … |
| 1.3.6.1.4.1.164.3.1.6.7.11 | Tableip2IfIntervalStatTable | not-accessible | current | Channels (Bundles) Interval Statistics Table. |
| 1.3.6.1.4.1.164.3.1.6.7.11.1 | Rowip2IfIntervalStatEntry | not-accessible | current | IP Interval Statistics per bundle |
| 1.3.6.1.4.1.164.3.1.6.7.11.1.1 | Columnip2IfIntervalStatIndex | read-only | current | The Interval index, which is actualy the Interval number. |
| 1.3.6.1.4.1.164.3.1.6.7.11.1.2 | Columnip2IfIntervalStatSeqErrors | read-only | current | Number of seconds that the sequence number of an incoming Frame causes a transition from the 'sync' state to the 'out of sequence' state in the selected interv… |
| 1.3.6.1.4.1.164.3.1.6.7.11.1.3 | Columnip2IfIntervalStatBufUnderflows | read-only | current | Number of seconds that the buffer underflows in the selected interval. This records the count of the number of seconds the Receive (Eth to TDM) buffer underflo… |
| 1.3.6.1.4.1.164.3.1.6.7.11.1.4 | Columnip2IfIntervalStatBufOverflows | read-only | current | Number of seconds that the buffer overflows in the selected interval. This records the count of the number of seconds the Receive (Eth to TDM) buffer overflows… |
| 1.3.6.1.4.1.164.3.1.6.7.11.1.5 | Columnip2IfIntervalStatMaxDelayVar | read-only | current | The maximum size of the buffer (in 10's of usec) in the selected interval. For some devices (e.g. MP-4100) units are usec. |
| 1.3.6.1.4.1.164.3.1.6.7.11.1.6 | Columnip2IfIntervalStatMinJittBufLevel | read-only | current | The Minimum jitter buffer level (in msec) for the selected interval. For some devices (e.g. MP-4100) units are usec. |
| 1.3.6.1.4.1.164.3.1.6.7.11.1.7 | Columnip2IfIntervalStatMaxJittBufLevel | read-only | current | The Maximum jitter buffer level (in msec) for the selected interval. For some devices (e.g. MP-4100) units are usec. |
| 1.3.6.1.4.1.164.3.1.6.7.11.1.8 | Columnip2IfIntervalStatTxErrFrameSec | read-only | current | The number of seconds in which errored frames were transmitted during the selected interval. The error may be one of the following: CRC error, Alignment error,… |
| 1.3.6.1.4.1.164.3.1.6.7.12 | Scalarip2IfLogEvents | read-write | current | This parameter defines whether all Jitter Buffer and Sequence Number events will enter to Log File, or enter those events to Log file in one minute steps. |
| 1.3.6.1.4.1.164.3.1.6.7.13 | Scalarip2IfEthSwitchMode | read-write | current | This parameter defines whether Eth Switch is in VLAN Tagged mode. |
| 1.3.6.1.4.1.164.3.1.6.8 | NodebroadbandIf | |||
| 1.3.6.1.4.1.164.3.1.6.8.1 | NodebdbandConfig | |||
| 1.3.6.1.4.1.164.3.1.6.8.1.1 | TableprtBdbandIndTable | not-accessible | current | The Indication Signal table. |
| 1.3.6.1.4.1.164.3.1.6.8.1.1.1 | RowprtBdbandIndEntry | not-accessible | current | An entry in the Indication Signal table. |
| 1.3.6.1.4.1.164.3.1.6.8.1.1.1.1 | ColumnprtBdbandCnfgIdx | read-only | current | This object indicates the Idx of the Agent Cnfg the following objects refer. 255=Temporary Cnfg (when relevant, Set is done only to this configuration). For Ag… |
| 1.3.6.1.4.1.164.3.1.6.8.1.1.1.2 | ColumnprtBdbandIdx | read-only | current | This object indicates a unique port or interface number. For numbering, see product's spec. For some products, the numbering can equal ifIndex. |
| 1.3.6.1.4.1.164.3.1.6.8.1.1.1.3 | ColumnprtBdbandIndSig | read-only | current | This object indicates a unique Indication Signal. ais(1) = AIS = Alarm Indication Signal. rdi(2) = RDI = Remote Defect Indication. |
| 1.3.6.1.4.1.164.3.1.6.8.1.1.1.4 | ColumnprtBdbandIndEvent | read-only | current | This object indicates a unique Event that can cause the Indication Signal. slm(2) = SLM = Signal Label Mismatch eed(4) = EED = Excessive Error Defect pathTrace… |
| 1.3.6.1.4.1.164.3.1.6.8.1.1.1.5 | ColumnprtBdbandIndSigEnable | read-create | current | This object allows user to define if the event specified by prtBdbandIndEvent will cause creation of the Indication Signal specified by prtBdbandIndSig or not.… |
| 1.3.6.1.4.1.164.3.1.6.8.1.1.1.6 | ColumnprtBdbandRowStatus | read-create | current | Creation/Deletion of rows in the table. |
| 1.3.6.1.4.1.164.3.1.6.8.1.2 | TableprtPhyConfigTable | not-accessible | current | The Phy Config table. Used now for Phy25.6 Mbps. |
| 1.3.6.1.4.1.164.3.1.6.8.1.2.1 | RowprtPhyConfigEntry | not-accessible | current | An entry in the Phy Config table. |
| 1.3.6.1.4.1.164.3.1.6.8.1.2.1.1 | ColumnprtPhyTimeElapsed | read-only | current | The number of seconds that have elapsed since the beginning of the current error-measurement period. |
| 1.3.6.1.4.1.164.3.1.6.8.1.2.1.2 | ColumnprtPhyValidIntervals | read-only | current | The number of previous intervals for which valid data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in … |
| 1.3.6.1.4.1.164.3.1.6.8.2 | NodeprtPhyPerfHistory | |||
| 1.3.6.1.4.1.164.3.1.6.8.2.1 | TableprtPhyCurrentTable | not-accessible | current | The 25.6 Mbps Section/Line Current table. |
| 1.3.6.1.4.1.164.3.1.6.8.2.1.1 | RowprtPhyCurrentEntry | not-accessible | current | An entry in the 25.6 Mbps Line Current table. ifIndex of the line 25.6 Mbps layer of type 25.6 Mbps. |
| 1.3.6.1.4.1.164.3.1.6.8.2.1.1.1 | ColumnprtPhyCurrentLOS | read-only | current | The counter associated with the number of Loss Of Sync seconds, encountered by a 25.6 Mbps interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.8.2.1.1.2 | ColumnprtPhyCurrentLSV | read-only | current | The counter associated with the number of Line symbol violation seconds, encountered by a 25.6 Mbps interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.8.2.1.1.3 | ColumnprtPhyCurrentUAS | read-only | current | The counter associated with the number of UAS encountered by a 25.6 Mbps interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.8.2.1.1.4 | ColumnprtPhyCurrentSES | read-only | current | The counter associated with the number of SES encountered by a 25.6 Mbps interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.8.2.1.1.5 | ColumnprtPhyCurrentES | read-only | current | The number of Errored Seconds, encountered by a 25.6 Mbps interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.8.2.1.1.6 | ColumnprtPhyCurrentStatus | read-only | current | The statuses of the current interval: 0 - O.K. 1 - The link has been switched by a redundancy mechanism. 2 - Module is in/out. 4 - Empty - card is out. |
| 1.3.6.1.4.1.164.3.1.6.8.2.1.1.7 | ColumnprtPhyCurrentLOF | read-only | current | The number of Loss of Frames, encountered by an interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.8.2.2 | TableprtPhyIntervalTable | not-accessible | current | The Line Interval table. |
| 1.3.6.1.4.1.164.3.1.6.8.2.2.1 | RowprtPhyIntervalEntry | not-accessible | current | An entry in the 25.6 Mbps Line Interval table. ifIndex of the line 25.6 Mbps layer of type 25.6 Mbps. |
| 1.3.6.1.4.1.164.3.1.6.8.2.2.1.1 | ColumnprtPhyIntervalNumber | read-only | current | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that … |
| 1.3.6.1.4.1.164.3.1.6.8.2.2.1.2 | ColumnprtPhyIntervalLOS | read-only | current | The counter associated with the number of Loss Of Sync seconds , encountered by a 25.6 Mbps interface in one of the previous 96, individual 15 minute intervals. |
| 1.3.6.1.4.1.164.3.1.6.8.2.2.1.3 | ColumnprtPhyIntervalLSV | read-only | current | The counter associated with the number of line symbol violation seconds , encountered by a 25.6 Mbps interface in one of the previous 96, individual 15 minute … |
| 1.3.6.1.4.1.164.3.1.6.8.2.2.1.4 | ColumnprtPhyIntervalUAS | read-only | current | The counter associated with the number of UAS encountered by a 25.6 Mbps interface in one of the previous 96, individual 15 minute intervals. |
| 1.3.6.1.4.1.164.3.1.6.8.2.2.1.5 | ColumnprtPhyIntervalSES | read-only | current | The counter associated with the number of SES encountered by a 25.6 Mbps interface in one of the previous 96, individual 15 minute intervals. |
| 1.3.6.1.4.1.164.3.1.6.8.2.2.1.6 | ColumnprtPhyIntervalES | read-only | current | The number of Errored Seconds, encountered by a 25.6 Mbps interface in one of the previous 96, individual 15 minute intervals. |
| 1.3.6.1.4.1.164.3.1.6.8.2.2.1.7 | ColumnprtPhyIntervalStatus | read-only | current | The statuses of the current interval: 0 - O.K. 1 - The link has been switched by a redundancy mechanism. 2 - Module is in/out. 4 - Empty - card is out. |
| 1.3.6.1.4.1.164.3.1.6.8.2.2.1.8 | ColumnprtPhyIntervalLOF | read-only | current | The number of Loss of Frames, encountered by an interface in one of the previous 96, individual 15 minute intervals. |
| 1.3.6.1.4.1.164.3.1.6.9 | Noder2If | |||
| 1.3.6.1.4.1.164.3.1.6.9.1 | Noder2ProfileCnfg | |||
| 1.3.6.1.4.1.164.3.1.6.9.1.1 | Tabler2CnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.1.6.9.1.1.1 | Rowr2CnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.6.9.1.1.1.1 | Columnr2CnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg being accessed. 255 = TmpCnfg. 1 = Current Cnfg. Write is allowed only to TmpCnfg. |
| 1.3.6.1.4.1.164.3.1.6.9.1.1.1.2 | Columnr2CnfgProfileIdx | read-only | current | Profile Index. Valid values: 1..5 Only instances of profiles that are defined having agnSigProfType=r2Cas will exist in this table. |
| 1.3.6.1.4.1.164.3.1.6.9.1.1.1.3 | Columnr2Mode | read-create | current | R2 Mode. auto - in this mode, default value of timers will be used by R2, according to the selected r2Country. manual - in this mode, user can change the value… |
| 1.3.6.1.4.1.164.3.1.6.9.1.1.1.4 | Columnr2Country | read-create | current | R2 Country. R2 Timers can have different range of values and defaults for each country. When r2Mode=auto, the default value is used by R2 according to this sel… |
| 1.3.6.1.4.1.164.3.1.6.9.1.1.1.5 | Columnr2Delay | read-create | current | This object enables user to configure the link as satellite or terrestrial. The seize acknowledge detect timing is much shorter (msec) for terrestrial link tha… |
| 1.3.6.1.4.1.164.3.1.6.9.1.1.1.6 | Columnr2MeteringInd | read-create | current | Which Bit will be used for Metering Indication. |
| 1.3.6.1.4.1.164.3.1.6.9.1.1.1.7 | Columnr2BreakMakeRatio | read-create | current | This object describes the Break-Make Ratio of Pulse Duration, in [msec]. RW only when r2Mode=manual. |
| 1.3.6.1.4.1.164.3.1.6.9.1.1.1.8 | Columnr2ReleaseGuardT2 | read-create | current | Release Guard timing T2. Release guard timing before going to idle, in [msec]. RW only when r2Mode=manual. |
| 1.3.6.1.4.1.164.3.1.6.9.1.1.1.9 | Columnr2Regret | read-create | current | Regret duration, in [sec]. RW only when r2Mode=manual. |
| 1.3.6.1.4.1.164.3.1.6.9.1.1.1.10 | Columnr2SeizeDetect | read-create | current | Seize Detect. Timer of the R2 incoming side. Minimum duration to detect a valid seizure, in [msec]. RW only when r2Mode=manual. |
| 1.3.6.1.4.1.164.3.1.6.9.1.1.1.11 | Columnr2SeizeAckDelay | read-create | current | Timer of the R2 incoming side. Delay before sending a valid seize ack signal, in [msec]. Applicable only when r2Mode=manual. only when r2Mode=manual. |
| 1.3.6.1.4.1.164.3.1.6.9.1.1.1.12 | Columnr2ClearBackDetect | read-create | current | Timer of the R2 incoming side. Minimum duration to recognize a valid clear-back, in [msec]. RW only when r2Mode=manual. |
| 1.3.6.1.4.1.164.3.1.6.9.1.1.1.13 | Columnr2ClearFwdDetect | read-create | current | Timer of the R2 incoming side. Minimum duration to recognize a valid clear-forward, in [msec]. RW only when r2Mode=manual. |
| 1.3.6.1.4.1.164.3.1.6.9.1.1.1.14 | Columnr2FaultDetect | read-create | current | Timer of the R2 incoming side. Minimum duration to recognize a block signal, in [msec]. RW only when r2Mode=manual. |
| 1.3.6.1.4.1.164.3.1.6.9.1.1.1.15 | Columnr2FaultRemoveDetect | read-create | current | Timer of the R2 incoming side. Minimum duration to recognize a valid block removal signal, in [msec]. RW only when r2Mode=manual. |
| 1.3.6.1.4.1.164.3.1.6.9.1.1.1.16 | Columnr2MeterPulseDuration | read-create | current | Timer of the R2 incoming side. Duration of metering pulse to be sent, in [msec]. RW only when r2Mode=manual. |
| 1.3.6.1.4.1.164.3.1.6.9.1.1.1.17 | Columnr2SeizeAckWait | read-create | current | Timer of the R2 outgoing side. Minimum duration to receive seizure acknowledge signal, in [msec]. RW only when r2Mode=manual. |
| 1.3.6.1.4.1.164.3.1.6.9.1.1.1.18 | Columnr2SeizeAckDetect | read-create | current | Timer of the R2 outgoing side. Minimum duration to recognize a valid seizure acknowledge signal, in [msec]. RW only when r2Mode=manual. |
| 1.3.6.1.4.1.164.3.1.6.9.1.1.1.19 | Columnr2AnswerDetect | read-create | current | Timer of the R2 outgoing side. Minimum duration to recognize a valid answer signal, in [msec]. RW only when r2Mode=manual. |
| 1.3.6.1.4.1.164.3.1.6.9.1.1.1.20 | Columnr2BlockRemoveDetect | read-create | current | Timer of the R2 outgoing side. Minimum duration to recognize a valid block removal signal, in [msec]. RW only when r2Mode=manual. |
| 1.3.6.1.4.1.164.3.1.6.9.1.1.1.21 | Columnr2MeterPulseDetect | read-create | current | Timer of the R2 outgoing side. Minimum duration of incoming meter pulse, in [msec]. RW only when r2Mode=manual. |
| 1.3.6.1.4.1.164.3.1.6.9.1.1.1.22 | Columnr2ForcedDisconnect | read-create | current | Timer of the R2 outgoing side. Minimum duration to recognize disconnect signal, in [msec]. RW only when r2Mode=manual. |
| 1.3.6.1.4.1.164.3.1.6.9.1.1.1.23 | Columnr2DisconnectAck | read-create | current | Timer of the R2 outgoing side. Minimum duration to recognize disconnect acknowledge signal, in [msec]. RW only when r2Mode=manual. |
| 1.3.6.1.4.1.164.3.1.6.9.1.1.1.24 | Columnr2ReleaseGuardT1 | read-create | current | Timer of the R2 outgoing side. Minimum duration to release guard, in [msec]. During this time, no new call can be initiated. RW only when r2Mode=manual. |
| 1.3.6.1.4.1.164.3.1.6.9.1.1.1.25 | Columnr2CnfgRowStatus | read-create | current | This object enables the user to add/delete entries to/from the table. |
| 1.3.6.1.4.1.164.3.1.6.9.1.2 | Tabler2TsTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.1.6.9.1.2.1 | Rowr2TsEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.6.9.1.2.1.1 | Columnr2TsCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg being accessed. 255 = TmpCnfg. 1 = Current Cnfg. Write is allowed only to TmpCnfg. |
| 1.3.6.1.4.1.164.3.1.6.9.1.2.1.2 | Columnr2TsProfileIdx | read-only | current | Profile Index. Valid values: 1..5 Only instances of profiles that are defined having agnSigProfType=r2Cas will exist in this table. |
| 1.3.6.1.4.1.164.3.1.6.9.1.2.1.3 | Columnr2TsIdx | read-only | current | TS Index. Valid values: 1..31 |
| 1.3.6.1.4.1.164.3.1.6.9.1.2.1.4 | Columnr2TsCallEnable | read-create | current | This object indicates the Enabled Call direction for the specific TS. |
| 1.3.6.1.4.1.164.3.1.6.9.1.2.1.5 | Columnr2TsMetering | read-create | current | This object indicates if the specific TS should support Metering. |
| 1.3.6.1.4.1.164.3.1.6.9.1.2.1.6 | Columnr2TsRowStatus | read-create | current | This object enables the user to add/delete entries to/from the table. |
| 1.3.6.1.4.1.164.3.1.6.9.1.2.1.7 | Columnr2TsReversePolarity | read-create | current | This object indicates if the specific TS should support Reverse Polarity. |
| 1.3.6.1.4.1.164.3.1.6.9.2 | Noder2IfStatus | |||
| 1.3.6.1.4.1.164.3.1.6.9.2.1 | Tabler2StatusTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.1.6.9.2.1.1 | Rowr2StatusEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.6.9.2.1.1.1 | Columnr2StatusSlotIdx | read-only | current | Slot Index |
| 1.3.6.1.4.1.164.3.1.6.9.2.1.1.2 | Columnr2StatusPortIdx | read-only | current | This object indicates a unique port number of the ML having R2 interface. Valid values: exPrt1 (1)..exPrt4 (4) |
| 1.3.6.1.4.1.164.3.1.6.9.2.1.1.3 | Columnr2StatusTsIdx | read-only | current | Time Slot index. |
| 1.3.6.1.4.1.164.3.1.6.9.2.1.1.4 | Columnr2StatusSigDirection | read-only | current | R2 Time Slot Signaling Direction. |
| 1.3.6.1.4.1.164.3.1.6.9.2.1.1.5 | Columnr2StatusTsState | read-only | current | R2 TS State |
| 1.3.6.1.4.1.164.3.1.6.9.2.1.1.6 | Columnr2StatusProtocolState | read-only | current | R2 Protocol State. |
| 1.3.6.1.4.1.164.3.1.6.10 | NodeadslIf | |||
| 1.3.6.1.4.1.164.3.1.6.10.1 | TableadslConfTable | not-accessible | current | A list of ADSL Configuration entries |
| 1.3.6.1.4.1.164.3.1.6.10.1.1 | RowadslConfEntry | not-accessible | current | An entry in adslConfTable |
| 1.3.6.1.4.1.164.3.1.6.10.1.1.1 | ColumnadslConfCnfgIdx | read-only | current | This object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurati… |
| 1.3.6.1.4.1.164.3.1.6.10.1.1.2 | ColumnadslConfFramingType | read-write | current | ADSL Frame type |
| 1.3.6.1.4.1.164.3.1.6.10.1.1.3 | ColumnadslConfPilotToneRequest | read-write | current | This parameter controls Pilot Tone Request (PTR). |
| 1.3.6.1.4.1.164.3.1.6.10.1.1.4 | ColumnadslConfTrellisCoding | read-write | current | This parameter enables/disables Trellis error detection code. using error detection code may introduce delays. |
| 1.3.6.1.4.1.164.3.1.6.10.1.1.5 | ColumnadslConfTransmissionMode | read-write | current | This parameter controls transmision mode: Echo Cancellation is required when both ATU-C an ATU-R use the same frequency. Frequency Division (different frequenc… |
| 1.3.6.1.4.1.164.3.1.6.10.1.1.6 | ColumnadslConfStandardCompliance | read-write | current | This parameter indicates standard compliance G.Lite enables extended ADSL range, ease of installation, but requires lower rate. |
| 1.3.6.1.4.1.164.3.1.6.10.1.1.7 | ColumnadslConfMaxBitPerBin | read-write | current | This parameter indicates maximum number of bits per ADSL Bin. Each Bin has bandwidth of 4khz. Range of values for this parameter is 0..15 |
| 1.3.6.1.4.1.164.3.1.6.10.1.1.8 | ColumnadslConfTxStartFreqBin | read-write | current | This parameter controls Transmit Start Bin number. For ADSL Annex A - range of values is 6 to 31. For ADSL Annex B - range of values is 33 to 63. Frequency (in… |
| 1.3.6.1.4.1.164.3.1.6.10.1.1.9 | ColumnadslConfTxEndFreqBin | read-write | current | This parameter controls Transmit End Bin number. For ADSL Annex A - range of values is 6 to 31. For ADSL Annex B - range of values is 33 to 63. requency (in kh… |
| 1.3.6.1.4.1.164.3.1.6.10.1.1.10 | ColumnadslConfRxStartFreqBin | read-write | current | This parameter controls Receive Start Bin number. Range of values for this parameter depends on ADSL Annex supported, and transmisson mode (adslTransmissionMod… |
| 1.3.6.1.4.1.164.3.1.6.10.1.1.11 | ColumnadslConfRxEndFreqBin | read-write | current | This parameter controls Receive End Bin number. Range of values for this parameter depends on ADSL Annex supported, and transmisson mode (adslTransmissionMode)… |
| 1.3.6.1.4.1.164.3.1.6.10.1.1.12 | ColumnadslConfTxPowerAttenuation | read-write | current | This parameter controls Transmit Gain in dB units Range is 0 to 12dB. Resolution is 1 dB |
| 1.3.6.1.4.1.164.3.1.6.10.1.1.13 | ColumnadslConfPSDMask | read-write | current | This parameter controls Power Spectral Density Mask. This object is applicable only for ADSL2. (adslConfStandardCompliance is one of the following: adsl2, adsl… |
| 1.3.6.1.4.1.164.3.1.6.10.1.1.14 | ColumnadslConfCommand | read-write | current | This parameter enables the user to perform commands on ADSL. off(1) - default state. After any operation ends, value should be automatically set to off(1). res… |
| 1.3.6.1.4.1.164.3.1.6.10.2 | TableadslStatusTable | not-accessible | current | A list of Adsl Status entries |
| 1.3.6.1.4.1.164.3.1.6.10.2.1 | RowadslStatusEntry | not-accessible | current | An entry in adslStatusTable |
| 1.3.6.1.4.1.164.3.1.6.10.2.1.1 | ColumnadslStatusBitRxRate | read-only | current | This parameter indicates actual Receive (Downstream) rate on this channel. |
| 1.3.6.1.4.1.164.3.1.6.10.2.1.2 | ColumnadslStatusSelectedStandard | read-only | current | This parameter indicates actual Standard (transsmission mode) chosen after syncronization. |
| 1.3.6.1.4.1.164.3.1.6.10.2.1.3 | ColumnadslStatusOperationalState | read-only | current | This parameter indicates syncronization status. |
| 1.3.6.1.4.1.164.3.1.6.10.2.1.4 | ColumnadslStatusBitErrorRate | read-only | current | This parameter indicates the ratio between the number of erroneous bits to the total bits number. The value is normalized to 10e-8. e.g. BER = 10 means BER = 1… |
| 1.3.6.1.4.1.164.3.1.6.10.2.1.5 | ColumnadslStatusSNRCompensationMode | read-only | current | This parameter indicates whether special SNR compensation mode has been activated or not. |
| 1.3.6.1.4.1.164.3.1.6.10.2.1.6 | ColumnadslStatusSNRCompensation | read-only | current | This parameter indicates the target-SNR Firmware currently used. |
| 1.3.6.1.4.1.164.3.1.6.10.2.1.7 | ColumnadslStatusSNRCorrection | read-only | current | This parameter indicates whether the ADSL chip is operating according to standard ADSL coding gain (auto) or some other automatic SW configuration (respective … |
| 1.3.6.1.4.1.164.3.1.6.11 | NodesdslIf | |||
| 1.3.6.1.4.1.164.3.1.6.11.1 | TablesdslConfTable | not-accessible | current | A list of SDSL Configuration entries |
| 1.3.6.1.4.1.164.3.1.6.11.1.1 | RowsdslConfEntry | not-accessible | current | An entry in sdslConfTable |
| 1.3.6.1.4.1.164.3.1.6.11.1.1.1 | ColumnsdslConfCnfgIdx | read-only | current | This object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurati… |
| 1.3.6.1.4.1.164.3.1.6.11.1.1.2 | ColumnsdslConfRateAquisition | read-write | current | SDSL Rate Aquisition mode Default value = fixed. |
| 1.3.6.1.4.1.164.3.1.6.11.1.1.3 | ColumnsdslConfBaudRate | read-write | current | SDSL baud rate. Not applicable if rate aquisition is AutoNegotiation. Default value = r144kbps |
| 1.3.6.1.4.1.164.3.1.6.11.1.1.4 | ColumnsdslConfMode | read-write | current | SDSL mode - COE (HTU-C) or CPE (HTU-R) Default value = COE |
| 1.3.6.1.4.1.164.3.1.6.12 | NodeshdslIf | |||
| 1.3.6.1.4.1.164.3.1.6.12.0 | NoderadHdsl2ShdslEvents | |||
| 1.3.6.1.4.1.164.3.1.6.12.0.1 | NotificationradHdsl2ShdslLoopBackTrap | current | This notification indicates that a remote loopback has been activated on the Embedded Operations Channel (EOC) of the SHDSL link. | |
| 1.3.6.1.4.1.164.3.1.6.12.1 | TableshdslEndpointCurrTable | not-accessible | current | This table is an extension of hdsl2ShdslEndpointCurrTable of rfc3276 It contains current status and performance information for segment endpoints in HDSL2/SHDS… |
| 1.3.6.1.4.1.164.3.1.6.12.1.1 | RowshdslEndpointCurrEntry | not-accessible | current | An entry in the shdslEndpointCurrTable. Each entry contains status and performance information relating to a single segment endpoint. It is indexed by the ifIn… |
| 1.3.6.1.4.1.164.3.1.6.12.1.1.1 | Columnhdsl2ShdslEndpointCurrRcvGain | read-only | current | The current receive gain in hundredth of dB. |
| 1.3.6.1.4.1.164.3.1.6.12.1.1.2 | Columnhdsl2ShdslEndpointCurrTransPower | read-only | current | The current transmit power in tenth of dBm. |
| 1.3.6.1.4.1.164.3.1.6.12.1.1.3 | Columnhdsl2ShdslEndpointCurrPowerBO | read-only | current | The current transceiver actual power backoff from 0dB to 31dB. |
| 1.3.6.1.4.1.164.3.1.6.12.1.1.4 | Columnhdsl2ShdslEndpointCurrLineStatus | read-only | current | The current line synchronization status. |
| 1.3.6.1.4.1.164.3.1.6.12.1.1.5 | Columnhdsl2ShdslEndpointCurrOpState | read-only | current | The current operational state. |
| 1.3.6.1.4.1.164.3.1.6.12.1.1.6 | Columnhdsl2ShdslEndpointAccumulatedTimeElapsed | read-only | current | The time (in hundredths of a second) since the accumulated counters were last re-initialized: Accumulated counters are hdsl2ShdslEndpointES, hdsl2ShdslEndpoint… |
| 1.3.6.1.4.1.164.3.1.6.12.1.1.7 | Columnhdsl2ShdslEndpointCurrPsd | read-only | current | This object indicates use of symmetric/asymmetric PSD (Power Spectral Density) Mask for the associated SHDSL Line. |
| 1.3.6.1.4.1.164.3.1.6.12.1.1.8 | Columnhdsl2ShdslEndpointValidIntervals | read-only | current | The number of previous 15 minutes intervals for which valid data was collected. |
| 1.3.6.1.4.1.164.3.1.6.12.1.1.9 | Columnhdsl2ShdslEndpointValidDaysIntervals | read-only | current | The number of previous Days intervals for which valid data was collected. |
| 1.3.6.1.4.1.164.3.1.6.12.2 | TableshdslEndpointMaintTable | not-accessible | current | This table supports maintenance operations (eg. loopbacks) to be performed on HDSL2/SHDSL segment endpoints. This table contains live data from equipment. As s… |
| 1.3.6.1.4.1.164.3.1.6.12.2.1 | RowshdslEndpointMaintEntry | not-accessible | current | An entry in the hdsl2ShdslEndpointMaintTable. Each entry corresponds to a single segment endpoint, and is indexed by the ifIndex of the HDSL2/SHDSL line, the U… |
| 1.3.6.1.4.1.164.3.1.6.12.2.1.1 | ColumnshdslMaintPowerBackOff | read-write | current | This object configures the receiver at the associated segment endpoint to operate in default or enhanced power backoff mode. powerbackoff may also be disabled |
| 1.3.6.1.4.1.164.3.1.6.12.3 | TableshdslSpanConfProfileTable | not-accessible | current | This table supports definitions of span configuration profiles for SHDSL lines. HDSL2 does not support these configuration options. This table MUST be maintain… |
| 1.3.6.1.4.1.164.3.1.6.12.3.1 | RowshdslSpanConfProfileEntry | not-accessible | current | Each entry corresponds to a single span configuration profile. Each profile contains a set of span configuration parameters. The configuration parameters in a … |
| 1.3.6.1.4.1.164.3.1.6.12.3.1.1 | Columnhdsl2ShdslSpanConfEocCompatible | read-only | current | This object indicate if device supports only standard EOC messages or also proprietary messages. |
| 1.3.6.1.4.1.164.3.1.6.12.3.1.2 | Columnhdsl2ShdslSpanConfAsymmetricPSDRate | read-write | current | This object indicates line rate when rfc3276.hdsl2ShdslSpanConfPSD value is asymmetric(2). Seleceted rate depends on transmission mode - specified in Annex A o… |
| 1.3.6.1.4.1.164.3.1.6.12.3.1.3 | Columnhdsl2ShdslSpanConfWireInterfaceUsed | read-write | current | This object enable user to configure SHDSL port with 4 wires to use 2 or 4 wires, or to auto detect far end number of wires |
| 1.3.6.1.4.1.164.3.1.6.12.3.1.4 | Columnhdsl2ShdslSpanConfHandshake | read-write | current | This object indicates the Handshake Procedure. |
| 1.3.6.1.4.1.164.3.1.6.12.4 | Nodehdsl2ShdslIfConf | |||
| 1.3.6.1.4.1.164.3.1.6.12.4.1 | Tablehdsl2ShdslIfConfTable | not-accessible | current | This table enables configuration of HDSL2/SHDSL interfaces per configuration index. Write operation for products supporting Active+Temp configurations, is poss… |
| 1.3.6.1.4.1.164.3.1.6.12.4.1.1 | Rowhdsl2ShdslIfConfEntry | not-accessible | current | An entry in the hdsl2ShdslIfConfTable. |
| 1.3.6.1.4.1.164.3.1.6.12.4.1.1.1 | Columnhdsl2ShdslIfConfIdx | read-only | current | This object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. Write operation for products supporting Activ… |
| 1.3.6.1.4.1.164.3.1.6.12.4.1.1.2 | Columnhdsl2ShdslSideIdx | read-only | current | This object indicates the Side of the managed object: Near-End or Far-End. |
| 1.3.6.1.4.1.164.3.1.6.12.4.1.1.3 | Columnhdsl2ShdslMaxBw | read-write | current | Maximum BW (Bandwidth) of the Shdsl Line, in Kbps units. Respective Max No. of TSs = Max. Rate/64 This object can be Set only for a Central (xtuC) unit. |
| 1.3.6.1.4.1.164.3.1.6.12.4.1.1.4 | Columnhdsl2ShdslPwrBackoff | read-write | current | This object configures the receiver at the associated segment endpoint to enable/disable power backoff mode. This object is similar to hdsl2ShdslMaintPowerBack… |
| 1.3.6.1.4.1.164.3.1.6.12.4.1.1.5 | Columnhdsl2ShdslTxMode | read-write | current | This object configures the Transmission Mode for the SHDSL Line. Normally, This object can be Set only for a Central (xtuC) unit. |
| 1.3.6.1.4.1.164.3.1.6.12.4.1.1.6 | Columnhdsl2ShdslAttenuationThreshold | read-write | current | This object configures the Attentuation alarm threshold. 0=Off Valid values: 0..127 . |
| 1.3.6.1.4.1.164.3.1.6.12.4.1.1.7 | Columnhdsl2ShdslSnrMarginThreshold | read-write | current | This object configures the SNR margin alarm threshold. 0=Off Valid values: 0..15 . |
| 1.3.6.1.4.1.164.3.1.6.12.4.1.1.8 | Columnhdsl2ShdslTs0OverDsl | read-write | current | This object configures the way TS0 will be treated over the SHDSL Line. looped - looped inside transparent - sent transparently over the DSL Line. This object … |
| 1.3.6.1.4.1.164.3.1.6.12.4.1.1.9 | Columnhdsl2ShdslMode | read-write | current | This object is relevant only for the Near-End device. stuC - Central stuR - Remote . |
| 1.3.6.1.4.1.164.3.1.6.12.4.1.1.10 | Columnhdsl2ShdslTsCompactionMode | read-write | current | This object configures how TSs will be compacted over the SHDSL Line. In both mapping cases (2),(3), only the TSs connected on the E1 line will be transferred … |
| 1.3.6.1.4.1.164.3.1.6.12.4.1.1.11 | Columnhdsl2ShdslEocEnable | read-write | current | This object configures whether EOC protocol is supported by the Far-End device working with this port. |
| 1.3.6.1.4.1.164.3.1.6.12.4.1.1.12 | Columnhdsl2ShdslFar1stIfNumOfTSs | read-write | current | This object configures the number of TSs of the SHDSL line that belong to the 1st Interface of the Far-End device, where 1st means that these TSs are first on … |
| 1.3.6.1.4.1.164.3.1.6.12.4.1.1.13 | Columnhdsl2ShdslFarEndDevice | read-write | current | This object indicates the Far-End device. It is used for 2 purposes: - in order to know if EOC is used (EOC is used only when the device is any of the ASMi52 o… |
| 1.3.6.1.4.1.164.3.1.6.12.4.1.1.14 | Columnhdsl2ShdslPwrBackoffDb | read-write | current | This object configures the Power Backoff (in dB) of the receiver, at the associated segment endpoint. 0=Off Valid values: 0..31 . |
| 1.3.6.1.4.1.164.3.1.6.12.4.1.1.15 | Columnhdsl2ShdslFarEndMuxTsa | read-write | current | This object represents Assignment of E1 TSs to Far-End MUX Interfaces. It is relevant only when hdsl2ShdslSideIdx=nearEnd(2), when for the Near-End device, hds… |
| 1.3.6.1.4.1.164.3.1.6.13 | NodevoiceIf | |||
| 1.3.6.1.4.1.164.3.1.6.13.1 | TablevoiceIfCadenceCnfgTable | not-accessible | current | Voice port ringing cadence configuration table. Each ringing cycle, indexed by voiceIfCadenceIdx, consists of a number of ring ON-Period/ring OFF-Period pairs.… |
| 1.3.6.1.4.1.164.3.1.6.13.1.1 | RowvoiceIfCadenceCnfgEntry | not-accessible | current | Ringing cadence configuration per voice port. |
| 1.3.6.1.4.1.164.3.1.6.13.1.1.1 | ColumnvoiceIfCadenceCnfgIdx | not-accessible | current | This object indicates the Idx of the Agent Cnfg the following objects refer to. 255=Temporary Cnfg (when relevant, Set is done only to this configuration). For… |
| 1.3.6.1.4.1.164.3.1.6.13.1.1.2 | ColumnvoiceIfCadencePortIdx | not-accessible | current | Voice Port Index. May equal to the value of ifIndex. |
| 1.3.6.1.4.1.164.3.1.6.13.1.1.3 | ColumnvoiceIfCadenceIdx | not-accessible | current | Cadence (ringing type) index. |
| 1.3.6.1.4.1.164.3.1.6.13.1.1.4 | ColumnvoiceIfCadencePeriodIdx | not-accessible | current | Periods index (pair number) in a ringing cycle Cadence. This index must be sequential, start from 1. Its maximum value is the number of pairs of certain ringin… |
| 1.3.6.1.4.1.164.3.1.6.13.1.1.5 | ColumnvoiceIfCadenceRowStatus | read-create | current | This attribute allows to create/delete ringing cadence entry in this table. For Vmux-110, only a single cadance can be defined. Delete action of a period entry… |
| 1.3.6.1.4.1.164.3.1.6.13.1.1.6 | ColumnvoiceIfCadenceRingOnPeriod | read-create | current | Duration (in tenth of seconds) of Ringing (ON) period. |
| 1.3.6.1.4.1.164.3.1.6.13.1.1.7 | ColumnvoiceIfCadenceRingOffPeriod | read-create | current | Duration (in tenth of seconds) of Silence (OFF) period. |
| 1.3.6.1.4.1.164.3.1.6.13.2 | TablevoiceIfCnfgTable | not-accessible | current | Voice port configuration table. |
| 1.3.6.1.4.1.164.3.1.6.13.2.1 | RowvoiceIfCnfgEntry | not-accessible | current | Configuration per voice port. |
| 1.3.6.1.4.1.164.3.1.6.13.2.1.1 | ColumnvoiceIfCnfgIdx | not-accessible | current | This object indicates the Idx of the Agent Cnfg the following objects refer to. 255=Temporary Cnfg (when relevant, Set is done only to this configuration). For… |
| 1.3.6.1.4.1.164.3.1.6.13.2.1.2 | ColumnvoiceIfPortIdx | not-accessible | current | Index of voice port . |
| 1.3.6.1.4.1.164.3.1.6.13.2.1.3 | ColumnvoiceIfRingingTimeout | read-write | current | Ringing timeout in seconds. |
| 1.3.6.1.4.1.164.3.1.6.13.2.1.4 | ColumnvoiceIfFlashTimeout | read-write | current | A time period in milliseconds. Flash (Register Recall) is detected if On-Hook time is shorter than this timeout. |
| 1.3.6.1.4.1.164.3.1.6.13.2.1.5 | ColumnvoiceIfRxGain | read-write | current | Receive gain in dB. |
| 1.3.6.1.4.1.164.3.1.6.13.2.1.6 | ColumnvoiceIfTxGain | read-write | current | Transmission gain in dB. |
| 1.3.6.1.4.1.164.3.1.6.13.2.1.7 | ColumnvoiceIfSignalingABCD | read-write | current | Octet String. Nibble No. 1 represents ON Hook (same for Rx and Tx). Nibble No. 2 represents OFF Hook (same for Rx and Tx). Nibble No. 3 represents Reverse Pola… |
| 1.3.6.1.4.1.164.3.1.6.13.2.1.8 | ColumnvoiceIfState | read-only | current | Attribute indicating voice port state. |
| 1.3.6.1.4.1.164.3.1.6.13.2.1.9 | ColumnvoiceIfCallState | read-only | current | Attribute indicating the status of the call on this port. In Vmux devices this attribute is used for FXS ports. |
| 1.3.6.1.4.1.164.3.1.6.14 | NodegsmInterface | |||
| 1.3.6.1.4.1.164.3.1.6.14.1 | NodeprtGsmConfig | |||
| 1.3.6.1.4.1.164.3.1.6.14.1.1 | TableprtGsmConfigTable | not-accessible | current | GSM Interface Configuration Table. |
| 1.3.6.1.4.1.164.3.1.6.14.1.1.1 | RowprtGsmConfigEntry | not-accessible | current | An entry in the GSM Interface Configuration Table. |
| 1.3.6.1.4.1.164.3.1.6.14.1.1.1.1 | ColumnprtGsmConfigIdx1 | not-accessible | current | The first index of the table. This object might represent the Configuration Index (1..100) being accessed, where Index=255 relates to the TmpCnfg. For devices … |
| 1.3.6.1.4.1.164.3.1.6.14.1.1.1.2 | ColumnprtGsmConfigIdx2 | not-accessible | current | The second index of the table. This object might represent the port index and for some devices might be the ifIndex. For System level or when NA, value = 1. |
| 1.3.6.1.4.1.164.3.1.6.14.1.1.1.3 | ColumnprtGsmConfigIfType | read-write | current | The GSM Interface Type. |
| 1.3.6.1.4.1.164.3.1.6.14.1.1.1.4 | ColumnprtGsmConfigUplinkTxDirection | read-write | current | The Tx Direction toward the network. |
| 1.3.6.1.4.1.164.3.1.6.14.1.1.1.5 | ColumnprtGsmConfigSubChRate | read-write | current | The Sub Channel Rate. |
| 1.3.6.1.4.1.164.3.1.6.14.1.1.1.6 | ColumnprtGsmConfigClockTracking | read-write | current | The Clock Tracking. This object is relevant only when Egress Uplink is LAN and the device (e.g. Vmux) on the BSC side is Rx Clock and the device (e.g. Vmux) on… |
| 1.3.6.1.4.1.164.3.1.6.14.1.1.1.7 | ColumnprtGsmConfigTrauIdleFrame | read-write | current | The TRAU frame to be used between calls. |
| 1.3.6.1.4.1.164.3.1.6.14.1.1.1.8 | ColumnprtGsmConfigDownlinkTrauSilenceFrame | read-write | current | The TRAU frame to be used in the downlink direction for silence/missing data. |
| 1.3.6.1.4.1.164.3.1.6.14.1.1.1.9 | ColumnprtGsmConfigGprsFrame | read-write | current | The GPRS Frame Type. |
| 1.3.6.1.4.1.164.3.1.6.14.1.1.1.10 | ColumnprtGsmConfigUnkTrauFrameSuppression | read-write | current | This object enables/disables suppression of unknown TRAU frames. |
| 1.3.6.1.4.1.164.3.1.6.14.1.1.1.11 | ColumnprtGsmConfigUnkTrauFrameOptimization | read-write | current | This object enables/disables optimization of unknown TRAU frames. |
| 1.3.6.1.4.1.164.3.1.6.14.1.1.1.12 | ColumnprtGsmConfigSilenceSuppressionRatio | read-write | current | The Silence Suppression Ratio, measured in percentages (1%). 0 = No Suppression. In case comfort noise is rapidly changed, it may cause the silence to be heard… |
| 1.3.6.1.4.1.164.3.1.6.14.1.1.1.13 | ColumnprtGsmConfigStatus | read-write | current | This object enables the user to create/delete entries in this table. Its usage for values (1)..(6) should be identical to RowStatus SYNTAX. notApplicable(255) … |
| 1.3.6.1.4.1.164.3.1.6.14.1.1.1.14 | ColumnprtGsmConfigUpstreamOptimization | read-write | current | This object represents the Optimization Mode at the Upstream direction (BTS -> BSC). |
| 1.3.6.1.4.1.164.3.1.6.14.1.1.1.15 | ColumnprtGsmConfigDownstreamOptimization | read-write | current | This object represents the Optimization Mode at the Downstream direction (BSC -> BTS). |
| 1.3.6.1.4.1.164.3.1.6.14.1.1.1.16 | ColumnprtGsmConfigByteReversal | read-write | current | This object defines whether BTS/BSC reverses the bytes or not. |
| 1.3.6.1.4.1.164.3.1.6.14.1.1.1.17 | ColumnprtGsmConfigTxJitter | read-write | current | The Transmit Jitter size (in msec), towards the BTS/BSC |
| 1.3.6.1.4.1.164.3.1.6.14.1.1.1.18 | ColumnprtGsmConfigSpdThreshold | read-write | current | The SPD (Smart Packet Drop) Threshold. SPD mechanism decides which frames to drop according to the voice energy of the frame. A frame should be dropped in case… |
| 1.3.6.1.4.1.164.3.1.6.14.1.2 | TableprtGsmTrafficTable | not-accessible | current | GSM Interface Traffic Table. |
| 1.3.6.1.4.1.164.3.1.6.14.1.2.1 | RowprtGsmTrafficEntry | not-accessible | current | An entry in the GSM Interface Traffic Table. |
| 1.3.6.1.4.1.164.3.1.6.14.1.2.1.1 | ColumnprtGsmTrafficIdx1 | not-accessible | current | The first index of the table. This object might represent the Configuration Index (1..100) being accessed, where Index=255 relates to the TmpCnfg. For devices … |
| 1.3.6.1.4.1.164.3.1.6.14.1.2.1.2 | ColumnprtGsmTrafficIdx2 | not-accessible | current | The second index of the table. This object might represent the port index and for some devices might be the ifIndex. For System level or when NA, value = 1. |
| 1.3.6.1.4.1.164.3.1.6.14.1.2.1.3 | ColumnprtGsmTrafficType | not-accessible | current | The GSM Interface Traffic Type. |
| 1.3.6.1.4.1.164.3.1.6.14.1.2.1.4 | ColumnprtGsmTrafficVpi | read-write | current | The VPI (of VPI/VCI pair) that should be used in connection with this traffic type. |
| 1.3.6.1.4.1.164.3.1.6.14.1.2.1.5 | ColumnprtGsmTrafficVci | read-write | current | The VCI (of VPI/VCI pair) that should be used in connection with this traffic type. |
| 1.3.6.1.4.1.164.3.1.6.14.1.2.1.6 | ColumnprtGsmTrafficMultiplexFrameSize | read-write | current | The Multiplexed Frame Size (in bytes) of this traffic type. |
| 1.3.6.1.4.1.164.3.1.6.14.1.2.1.7 | ColumnprtGsmTrafficTxInterval | read-write | current | The Tx Interval (in msec) of this traffic type. |
| 1.3.6.1.4.1.164.3.1.6.15 | Nodeds0BundleIf | |||
| 1.3.6.1.4.1.164.3.1.6.15.1 | Tableds0BundleTable | not-accessible | current | This table contains additional objects for the standard dsx0BundleTable. |
| 1.3.6.1.4.1.164.3.1.6.15.1.1 | Rowds0BundleEntry | not-accessible | current | An entry augmenting the standard dsx0BundleEntry. |
| 1.3.6.1.4.1.164.3.1.6.15.1.1.1 | Columnds0BundleTsBitFilter | read-create | current | Filter for controlling the bandwidth of the bundle. The TS Bit Filter contains 8 bits (Hex): 00..FF. When a bit is 0: it means that no data will be Tx/Rx on th… |
| 1.3.6.1.4.1.164.3.1.6.15.1.1.2 | Columnds0BundleUserDefTsBitFilter | read-create | current | User Defined Filter for controlling the bandwidth of the bundle. This MIB object is relevant only when ds0BundleTsBitFilter = userDefined (4) This object is us… |
| 1.3.6.1.4.1.164.3.1.6.15.1.1.3 | Columnds0BundleTdmPortNum | read-create | current | This parameter indicates the TDM port number that the bundle is associated to. |
| 1.3.6.1.4.1.164.3.1.6.15.1.1.4 | Columnds0BundleTimeslotMask | read-create | current | This parameter indicates the timeslots allocated for the bundle: Each bit represents a timeslot. Setting a bit to '1' denotes that the corresponding timeslot i… |
| 1.3.6.1.4.1.164.3.1.6.16 | NodepdhInterface | |||
| 1.3.6.1.4.1.164.3.1.6.16.1 | NodepdhIfConfig | |||
| 1.3.6.1.4.1.164.3.1.6.16.1.1 | TablepdhLogPrtConfigTable | not-accessible | current | Configuration for PDH (Plesiochronous Digital Hierarchy) Logical ports/interfaces. For example: GFP (Generic Framing Procedure) logical interface or VCG (Virtu… |
| 1.3.6.1.4.1.164.3.1.6.16.1.1.1 | RowpdhLogPrtConfigEntry | not-accessible | current | Entry in Configuration Table for PDH Logical Ports. |
| 1.3.6.1.4.1.164.3.1.6.16.1.1.1.1 | ColumnpdhLogPrtCnfgIdx | not-accessible | current | This object indicates the Index of the Configuration being accessed. Index of 255 relates to the Temporary/Edit (Scratch) Configuration. For products that supp… |
| 1.3.6.1.4.1.164.3.1.6.16.1.1.1.2 | ColumnpdhLogPrtIndex | not-accessible | current | This object indicates the number or ifIndex of the selected logical port. |
| 1.3.6.1.4.1.164.3.1.6.16.1.1.1.3 | ColumnpdhLogPrtMaxDiffDelay | read-write | current | Maximum Differential Delay. Largest allowed difference in msec. between delays in two links (E1/T1) that are members of the selected VCG. This object is releva… |
| 1.3.6.1.4.1.164.3.1.6.16.2 | NodepdhIfStatus | |||
| 1.3.6.1.4.1.164.3.1.6.16.2.1 | TablepdhLogPrtStatusTable | not-accessible | current | Status of PDH logical port |
| 1.3.6.1.4.1.164.3.1.6.16.2.1.1 | RowpdhLogPrtStatusEntry | not-accessible | current | Entry in the PDH Logical Port Status Table |
| 1.3.6.1.4.1.164.3.1.6.16.2.1.1.1 | ColumnpdhLogPrtStatusIndex | not-accessible | current | This object indicates the number or ifIndex of the selected logical port. |
| 1.3.6.1.4.1.164.3.1.6.16.2.1.1.2 | ColumnpdhLogPrtFrameDelineation | read-only | current | This object is relevant for GFP (Generic Framing Procedure) only. It indicates the GFP Frame delineation status. Frame delineation means that the device has fo… |
| 1.3.6.1.4.1.164.3.1.6.16.2.1.1.3 | ColumnpdhLogPrtDiffDelay | read-only | current | Differential Delay. This object indicates the largest detected difference in msec. between delays in two links (E1/T1) that are members of the selected VCG. |
| 1.3.6.1.4.1.164.3.1.6.16.2.2 | TablevcgLcasMembersStatusTable | not-accessible | current | Status for LCAS (Link Capacity Adjustment Scheme) members (links) of VCG logical port. |
| 1.3.6.1.4.1.164.3.1.6.16.2.2.1 | RowvcgLcasMembersStatusEntry | not-accessible | current | Entry in LCAS (Link Capacity Adjustment Scheme) links status table for VCG (Virtual Concatenation Group) logical port. |
| 1.3.6.1.4.1.164.3.1.6.16.2.2.1.1 | ColumnvcgLcasMembersVcgIndex | not-accessible | current | This object indicates the number or ifIndex of the selected VCG (Virtual Concatenation Group) logical port. |
| 1.3.6.1.4.1.164.3.1.6.16.2.2.1.2 | ColumnvcgLcasMembersLinkIndex | not-accessible | current | This object indicates the number or ifIndex of the PDH link that is a member of the VCG. |
| 1.3.6.1.4.1.164.3.1.6.16.2.2.1.3 | ColumnvcgLcasMembersSourceStatus | read-only | current | This object summarizes the LCAS status of the source (Tx) side of the link. |
| 1.3.6.1.4.1.164.3.1.6.16.2.2.1.4 | ColumnvcgLcasMembersSinkStatus | read-only | current | This object summarizes the LCAS status of the sink (Rx) side of the link. |
| 1.3.6.1.4.1.164.3.1.6.16.3 | NodepdhIfStatis | |||
| 1.3.6.1.4.1.164.3.1.6.16.3.1 | TablepdhLogPrtStatisTable | not-accessible | current | Statistics for PDH (Plesiochronous Digital Hierarchy) Logical Port, currently used for GFP (Generic Framing Procedure) interface. |
| 1.3.6.1.4.1.164.3.1.6.16.3.1.1 | RowpdhLogPrtStatisEntry | not-accessible | current | Entry in Statistics Table for PDH (Plesiochronous Digital Hierarchy) Logical Port. |
| 1.3.6.1.4.1.164.3.1.6.16.3.1.1.1 | ColumnpdhLogPrtStatisIndex | not-accessible | current | This object indicates the number or ifIndex of the selected Interface. |
| 1.3.6.1.4.1.164.3.1.6.16.3.1.1.2 | ColumnpdhLogPrtStatisRxCorrFrames | read-only | current | This object indicates the total number of Correct Frames received. |
| 1.3.6.1.4.1.164.3.1.6.16.3.1.1.3 | ColumnpdhLogPrtStatisRxCorrOctets | read-only | current | This object indicates the total number of Correct Octets received. |
| 1.3.6.1.4.1.164.3.1.6.16.3.1.1.4 | ColumnpdhLogPrtStatisRxCHecErrors | read-only | current | This object indicates the total number of Frames received with errors in the Core header (i.e. cHEC field. cHEC means Core Header Error Correction). |
| 1.3.6.1.4.1.164.3.1.6.16.3.1.1.5 | ColumnpdhLogPrtStatisRxTHecErrors | read-only | current | This object indicates the total number of Frames received with errors in the Type header (i.e. tHEC field. tHEC means Type Header Error Correction). |
| 1.3.6.1.4.1.164.3.1.6.16.3.1.1.6 | ColumnpdhLogPrtStatisRxFcsErrors | read-only | current | This object indicates the total number of Frames received with Frame Check Sequence errors. |
| 1.3.6.1.4.1.164.3.1.7 | NodevoipWanGen | |||
| 1.3.6.1.4.1.164.3.1.7.0 | NodevoipWanGenEvents | |||
| 1.3.6.1.4.1.164.3.1.7.0.1 | NotificationvoipTariffServerCommFail | current | This trap is sent when communication attempt with a Tariff Server failed. | |
| 1.3.6.1.4.1.164.3.1.7.1 | ScalarvoipCardConfig | read-only | current | The value of this object determines the VOIP card configuration. Bit 0 (LSB): if 1 - a GK exists. If 0 - no GK exists in this card. The other bits may be used … |
| 1.3.6.1.4.1.164.3.1.7.2 | TablegkGenTable | not-accessible | current | General parameters for the VOIP GateKeeper. |
| 1.3.6.1.4.1.164.3.1.7.2.1 | RowgkGenEntry | not-accessible | current | An entry in table gkGenTable. |
| 1.3.6.1.4.1.164.3.1.7.2.1.1 | ColumngkGenCallMode | read-write | current | This parameters shows whether the calls will go through the GK (routed) or whether the calls will be direct from Endpoint to Endpoint without involving the GK … |
| 1.3.6.1.4.1.164.3.1.7.2.1.2 | ColumngkGenMaxConnections | read-write | current | MAX no. of connections enabled by the GK to take place simultaneously. If the MAX no. of calls is exceeded, a busy signal will be returned. |
| 1.3.6.1.4.1.164.3.1.7.2.1.3 | ColumngkGenDefaultDistance | read-write | current | The Distance allowed for endpoints that are registered dynamically. |
| 1.3.6.1.4.1.164.3.1.7.2.1.4 | ColumngkGenOutOfZoneDist | read-write | current | The Distance allowed for an out of zone endpoint that is making a call through the gatekeeper. |
| 1.3.6.1.4.1.164.3.1.7.2.1.5 | ColumngkGenCallAcceptPolicy | read-write | current | Defines the policy concerning the incoming phone calls. The importance of this parameter is for bidding and security matters. Accept All - all the incoming cal… |
| 1.3.6.1.4.1.164.3.1.7.2.1.6 | ColumngkGenIrqInterval | read-write | current | In order for the Gatekeeper to determine if an endpoint is turned off, or has otherwise entered a failure mode, the Gatekeeper may use the Information Request … |
| 1.3.6.1.4.1.164.3.1.7.2.1.7 | ColumngkGenQ931Port | read-write | current | Q.931 Port no. |
| 1.3.6.1.4.1.164.3.1.7.2.1.8 | ColumngkGenRasPort | read-write | current | RAS Port no. |
| 1.3.6.1.4.1.164.3.1.7.2.1.9 | ColumngkGenRegPolicy | read-write | current | Policy of dynamic registrations in the Gatekeeper. The GK will act according to the following policies: Accept All - The GK will enable all requesting endpoint… |
| 1.3.6.1.4.1.164.3.1.7.2.1.10 | ColumngkGenZoneId | read-write | current | Zone Identifier: 1 or 2 digits, (0-9)(1-9). |
| 1.3.6.1.4.1.164.3.1.7.3 | TablegkEndpTable | not-accessible | current | Table containing the Endpoints that are registered (statically & Dynamically) with the current GK. |
| 1.3.6.1.4.1.164.3.1.7.3.1 | RowgkEndpEntry | not-accessible | current | An entry in table gkEndpTable. |
| 1.3.6.1.4.1.164.3.1.7.3.1.1 | ColumngkEndpAliasTag | read-only | current | Alias Tag of the Endpoint. |
| 1.3.6.1.4.1.164.3.1.7.3.1.2 | ColumngkEndpAlias | read-only | current | Alias of the Endpoint. |
| 1.3.6.1.4.1.164.3.1.7.3.1.3 | ColumngkEndpRowStatus | read-create | current | The row status of the entry. This object is required to create or delete rows remotely by a manager. |
| 1.3.6.1.4.1.164.3.1.7.3.1.4 | ColumngkEndpAddressTag | read-create | current | Address Tag of Endpoint. |
| 1.3.6.1.4.1.164.3.1.7.3.1.5 | ColumngkEndpAddress | read-create | current | Address of Endpoint. |
| 1.3.6.1.4.1.164.3.1.7.3.1.6 | ColumngkEndpID | read-create | current | Endpoint Identifier. |
| 1.3.6.1.4.1.164.3.1.7.3.1.7 | ColumngkEndpType | read-create | current | This parameter shows whether the current endpoint is a GW or Terminal or any other type of H.323 endpoint. |
| 1.3.6.1.4.1.164.3.1.7.3.1.8 | ColumngkEndpQ931Port | read-create | current | Q.931 Port no. |
| 1.3.6.1.4.1.164.3.1.7.3.1.9 | ColumngkEndpDistance | read-create | current | Distance from the current endpoint to the GateKeeper with which it is Registered. |
| 1.3.6.1.4.1.164.3.1.7.3.1.10 | ColumngkEndpRegMode | read-only | current | This parameter shows whether the Endpoint Registered Dynamically or Statically. |
| 1.3.6.1.4.1.164.3.1.7.3.1.11 | ColumngkEndpSetOnline | read-create | current | This parameter shows whether the endpoint will always be online or whether it will be on line upon Dynamic Registration only. |
| 1.3.6.1.4.1.164.3.1.7.3.1.12 | ColumngkEndpStatus | read-only | current | This parameter shows whether the endpoint is currently online. |
| 1.3.6.1.4.1.164.3.1.7.4 | TablegkNeighbTable | not-accessible | current | Table of GateKeepers that are Neighbors of the current Gatekeeper. |
| 1.3.6.1.4.1.164.3.1.7.4.1 | RowgkNeighbEntry | not-accessible | current | An entry in table gkNeighbTable. |
| 1.3.6.1.4.1.164.3.1.7.4.1.1 | ColumngkNeighbAddressTag | read-only | current | Tag of GK or GW address. |
| 1.3.6.1.4.1.164.3.1.7.4.1.2 | ColumngkNeighbAddress | read-only | current | Address of GK or GW. |
| 1.3.6.1.4.1.164.3.1.7.4.1.3 | ColumngkNeighbRowStatus | read-create | current | The row status of the entry. This object is required to create or delete rows remotely by a manager. |
| 1.3.6.1.4.1.164.3.1.7.4.1.4 | ColumngkNeighbLeadingAlias | read-create | current | This is the Leading Alias Address (Zone Prefix) that will be dialed in order to reach the specific neighbor. |
| 1.3.6.1.4.1.164.3.1.7.4.1.5 | ColumngkNeighbDistance | read-create | current | Distance between the local GateKeeper and the Neighbor GateKeeper. |
| 1.3.6.1.4.1.164.3.1.7.4.1.6 | ColumngkNeighbDescription | read-create | current | ASCII String Description for identifying the Neighbor. |
| 1.3.6.1.4.1.164.3.1.7.5 | TablegwGenTable | not-accessible | current | General parameters for the VOIP GateWay. |
| 1.3.6.1.4.1.164.3.1.7.5.1 | RowgwGenEntry | not-accessible | current | An entry in table gwGenTable. |
| 1.3.6.1.4.1.164.3.1.7.5.1.1 | ColumngwGenGwId | read-write | current | A character string of up to 20 characters identifying the gateway. |
| 1.3.6.1.4.1.164.3.1.7.5.1.2 | ColumngwGenQ931Port | read-write | current | The Q.931 port no. of the Gateway. |
| 1.3.6.1.4.1.164.3.1.7.5.1.3 | ColumngwGenRasPort | read-write | current | The RAS port no. of the Gateway. |
| 1.3.6.1.4.1.164.3.1.7.5.1.4 | ColumngwGenMode | read-write | current | GW Mode: disable - The GW is not activated. cvsIp - CVS is a Compressed Voice System. The GW will compress voice calls at a ratio of 16 to 1. 16 time slots of … |
| 1.3.6.1.4.1.164.3.1.7.5.1.5 | ColumngwGenVoipExtension | read-write | current | This is the extension number of the VOIP protocol. It is used for the Voice card to identify the calls made through the VoIP card. The user may choose an arbit… |
| 1.3.6.1.4.1.164.3.1.7.5.1.6 | ColumngwGenRemGwAddress | read-write | current | Defines the remote gateway address (IP + port). It is important for gateway to gateway connection. |
| 1.3.6.1.4.1.164.3.1.7.5.1.7 | ColumngwGenMaxConnections | read-write | current | MAX no. of connections enabled by the GW. |
| 1.3.6.1.4.1.164.3.1.7.5.1.8 | ColumngwGenTOS | read-write | current | Type of Service. The BIT Format is consistent with the IP standard: + | | | | | PRECEDENCE | TYPE OF SERVICE | 0 | | | | | + 0 1 2 3 4 5 6 7 At present, only 1… |
| 1.3.6.1.4.1.164.3.1.7.5.1.9 | ColumngwGenBackupGkAddr | read-write | current | Defines the backup gatekeeper address (IP + port). When the backup GK is active, all the calls will be routed to it and it will be responsible for their addres… |
| 1.3.6.1.4.1.164.3.1.7.5.1.10 | ColumngwGenTimeToRegister | read-write | current | The GW should register every 'Time to Register' seconds with the GK. The 'Time to Register' range is from 0 to 900 seconds in intervals of 60 seconds. 0 means … |
| 1.3.6.1.4.1.164.3.1.7.6 | TableradH245ConfigTable | not-accessible | current | This table contains information about H.245 configuration parameters. It is a list of configuration parameter entries. The number of entries equals to the numb… |
| 1.3.6.1.4.1.164.3.1.7.6.1 | RowradH245ConfigEntry | not-accessible | current | It contains objects that describe the H.245 configuration parameters. |
| 1.3.6.1.4.1.164.3.1.7.6.1.1 | Columnh245MaxJitter | read-write | current | Maximum peak to peak delivery (in miliseconds) of audio packets to the transport layer that the transmitter shall cause. |
| 1.3.6.1.4.1.164.3.1.7.6.1.2 | Columnh245Tunneling | read-write | current | This variable enables or disables the usage of Tunneling. |
| 1.3.6.1.4.1.164.3.1.7.7 | TablertpMultiplexTable | not-accessible | current | RTP Multiplexing table. RTP Multiplexing: In IP telephony system, the addition of packet headers, including IP, UDP and RTP headers, increases the header overh… |
| 1.3.6.1.4.1.164.3.1.7.7.1 | RowrtpMultiplexEntry | not-accessible | current | An entry in table rtpMultiplexTable. |
| 1.3.6.1.4.1.164.3.1.7.7.1.1 | ColumnrtpMultiplexedRtp | read-write | current | RTP Multiplexing is a way to send multiple RTP packets with a single IP frame. This will reduce the header overhead and decrease the delay by enabling voice tr… |
| 1.3.6.1.4.1.164.3.1.7.7.1.2 | ColumnrtpMultiplexFrameSize | read-write | current | Defines the maximum size in Bytes of the multiplexed frame. In some cases this must be limited to avoid IP fragmentation, which makes the multiplexing useless,… |
| 1.3.6.1.4.1.164.3.1.7.7.1.3 | ColumnrtpMultiplexInterval | read-write | current | Defines the maximum amout of time (msec.) between multiplexed frames that are sent. Legal values: 10-90 msec. |
| 1.3.6.1.4.1.164.3.1.7.7.1.4 | ColumnrtpMultiplexPcktRedundancy | read-write | current | Defines the the number of times each voice frame should be transmitted. At present legal values are: 1-4. |
| 1.3.6.1.4.1.164.3.1.7.8 | NodevoipTariff | |||
| 1.3.6.1.4.1.164.3.1.7.8.1 | TablevoipTariffServerTable | not-accessible | current | VoIP Tariff Server table. |
| 1.3.6.1.4.1.164.3.1.7.8.1.1 | RowvoipTariffServerEntry | not-accessible | current | An entry in table voipTariffServerTable. |
| 1.3.6.1.4.1.164.3.1.7.8.1.1.1 | ColumnvoipTariffServerCnfgIdx | not-accessible | current | This object indicates the Index of the Configuration (1..255) being accessed ; Index=255 relates to the Temporary Configuration. Set is allowed only to the Tem… |
| 1.3.6.1.4.1.164.3.1.7.8.1.1.2 | ColumnvoipTariffServerIdx | not-accessible | current | This object indicates the Index of the Tariff Server being accessed (1, 2). |
| 1.3.6.1.4.1.164.3.1.7.8.1.1.3 | ColumnvoipTariffServerIpAddress | read-write | current | This object defines the IP Address of the Tariff Server. |
| 1.3.6.1.4.1.164.3.1.7.8.1.1.4 | ColumnvoipTariffServerPort | read-write | current | This object defines the used TCP/UDP port of the Tariff Server. |
| 1.3.6.1.4.1.164.3.1.7.9 | NodevoipConfig | |||
| 1.3.6.1.4.1.164.3.1.7.9.1 | NodevoipSip | |||
| 1.3.6.1.4.1.164.3.1.7.9.1.1 | NodevoipSipCommon | |||
| 1.3.6.1.4.1.164.3.1.7.9.1.1.1 | NodevoipSipCommonCfg | |||
| 1.3.6.1.4.1.164.3.1.7.9.1.1.1.1 | TableradSipCommonCfgTable | not-accessible | current | SIP Common Configuration table. This table contains the common configuration objects applicable to all SIP entities. |
| 1.3.6.1.4.1.164.3.1.7.9.1.1.1.1.1 | RowradSipCommonCfgEntry | not-accessible | current | A row of SIP Common Configuration table. |
| 1.3.6.1.4.1.164.3.1.7.9.1.1.1.1.1.1 | ColumnradSipCommonCfgIdx | not-accessible | current | The index of the table. This object might represent the Configuration Index (1..100) being accessed; Index=255 relates to the TmpCnfg. For devices with multipl… |
| 1.3.6.1.4.1.164.3.1.7.9.1.1.1.1.1.2 | ColumnradSipCommonCfgListenPort | read-write | current | This object represents the SIP Listening Port number. |
| 1.3.6.1.4.1.164.3.1.7.9.1.1.1.1.1.3 | ColumnradSipCommonCfgRtpBaseUdpPort | read-write | current | This object represents the RTP Base UDP Port number. |
| 1.3.6.1.4.1.164.3.1.7.9.1.1.1.1.1.4 | ColumnradSipCommonCfgRtpIpTos | read-write | current | This object represents the TOS byte value that will be written in the IP header for RTP packets only. |
| 1.3.6.1.4.1.164.3.1.7.9.1.2 | NodevoipSipServer | |||
| 1.3.6.1.4.1.164.3.1.7.9.1.2.1 | NodevoipSipServerCfg | |||
| 1.3.6.1.4.1.164.3.1.7.9.1.2.1.1 | TableradSipRegCfgTable | not-accessible | current | SIP Registrar Configuration table. |
| 1.3.6.1.4.1.164.3.1.7.9.1.2.1.1.1 | RowradSipRegCfgEntry | not-accessible | current | A row of SIP Registrar Configuration table. |
| 1.3.6.1.4.1.164.3.1.7.9.1.2.1.1.1.1 | ColumnradSipRegCfgIdx | not-accessible | current | The first index of the table. This object might represent the Configuration Index (1..100) being accessed; Index=255 relates to the TmpCnfg. For devices with m… |
| 1.3.6.1.4.1.164.3.1.7.9.1.2.1.1.1.2 | ColumnradSipRegIdx | not-accessible | current | This object represents the Registrar Index. |
| 1.3.6.1.4.1.164.3.1.7.9.1.2.1.1.1.3 | ColumnradSipRegActivation | read-create | current | This object allows the user to activate the Registrar. If changed from enable(3) to disable(2) - device will be disconnected from server (stop sending renewal … |
| 1.3.6.1.4.1.164.3.1.7.9.1.2.1.1.1.4 | ColumnradSipRegAddr | read-create | current | This object represents the Registrar's IP/URL Address. |
| 1.3.6.1.4.1.164.3.1.7.9.1.2.1.1.1.5 | ColumnradSipRegUdpPort | read-create | current | This object represents the Registration's Destination UDP Port number. |
| 1.3.6.1.4.1.164.3.1.7.9.1.2.1.1.1.6 | ColumnradSipRegRenewalTimer | read-create | current | This object represents the Registration's Renewal Timer, in seconds. |
| 1.3.6.1.4.1.164.3.1.7.9.1.2.1.1.1.7 | ColumnradSipRegDomain | read-create | current | This object represents the User Agent's Domain Name. |
| 1.3.6.1.4.1.164.3.1.7.9.1.2.1.1.1.8 | ColumnradSipRegMode | read-create | current | This object indicates the Registration Mode: gateway(1) - one registration for the device localEntries(2) - number of registrations are defined according to th… |
| 1.3.6.1.4.1.164.3.1.7.9.1.2.1.1.1.9 | ColumnradSipRegUserDefinition | read-create | current | This object indicates the User configuration: gateway(1) - single user configuration for the device localEntries(2) - different user configuration for each loc… |
| 1.3.6.1.4.1.164.3.1.7.9.1.2.1.1.1.10 | ColumnradSipRegCallWithoutReg | read-create | current | This object indicates whether a call is enabled without registration. |
| 1.3.6.1.4.1.164.3.1.7.9.1.2.1.1.1.11 | ColumnradSipRegUserParams | read-create | current | This object indicates the User's parameters. This object is irrelevant when radSipRegUserDefinition = localEntries(2). |
| 1.3.6.1.4.1.164.3.1.7.9.1.2.1.1.1.12 | ColumnradSipRegRowStatus | read-create | current | This object enables the user to create/delete entries in this table. |
| 1.3.6.1.4.1.164.3.1.7.9.2 | TablevoipNetRoutTable | not-accessible | current | Network Routing table. |
| 1.3.6.1.4.1.164.3.1.7.9.2.1 | RowvoipNetRoutEntry | not-accessible | current | A row of Network Routing table. |
| 1.3.6.1.4.1.164.3.1.7.9.2.1.1 | ColumnvoipNetRoutCfgIdx | not-accessible | current | The first index of the table. This object might represent the Configuration Index (1..100) being accessed; Index=255 relates to the TmpCnfg. For devices with m… |
| 1.3.6.1.4.1.164.3.1.7.9.2.1.2 | ColumnvoipNetRoutPrefix | not-accessible | current | This object represents the prefix number. This prefix can include non-decimal digits, such as * or #. The default route will be represented by an empty prefix. |
| 1.3.6.1.4.1.164.3.1.7.9.2.1.3 | ColumnvoipNetRoutRowStatus | read-create | current | This object enables the user to create/delete entries in this table. |
| 1.3.6.1.4.1.164.3.1.7.9.2.1.4 | ColumnvoipNetRoutMinDigits | read-create | current | This object indicates the Minimum number of digits. |
| 1.3.6.1.4.1.164.3.1.7.9.2.1.5 | ColumnvoipNetRoutMaxDigits | read-create | current | This object indicates the Maximum number of digits. |
| 1.3.6.1.4.1.164.3.1.7.9.2.1.6 | ColumnvoipNetRoutAddr | read-create | current | This object indicates the route's IP/URL Address. |
| 1.3.6.1.4.1.164.3.1.7.9.2.1.7 | ColumnvoipNetRoutUdpPort | read-create | current | This object indicates the route's destination UDP port number. |
| 1.3.6.1.4.1.164.3.1.7.9.2.1.8 | ColumnvoipNetRoutOutboundProxySupport | read-create | current | This object indicates whether the Outbound Proxy is supported. |
| 1.3.6.1.4.1.164.3.1.7.9.2.1.9 | ColumnvoipNetRoutOutboundProxyAddr | read-create | current | This object indicates the Outbound Proxy's IP/URL Address. |
| 1.3.6.1.4.1.164.3.1.7.9.2.1.10 | ColumnvoipNetRoutOutboundProxyUdpPort | read-create | current | This object indicates the Outbound Proxy UDP port number. |
| 1.3.6.1.4.1.164.3.1.7.9.3 | TablevoipNumManipTable | not-accessible | current | Numbering Manipulation table. |
| 1.3.6.1.4.1.164.3.1.7.9.3.1 | RowvoipNumManipEntry | not-accessible | current | A row of Numbering Manipulation table. |
| 1.3.6.1.4.1.164.3.1.7.9.3.1.1 | ColumnvoipNumManipCfgIdx | not-accessible | current | The first index of the table. This object might represent the Configuration Index (1..100) being accessed; Index=255 relates to the TmpCnfg. For devices with m… |
| 1.3.6.1.4.1.164.3.1.7.9.3.1.2 | ColumnvoipNumManipTypeId | not-accessible | current | This object represents the Numbering Manipulation's Type ID. Type ID represents a unique Type, which can be different for each device. For Vmux-300 devices - T… |
| 1.3.6.1.4.1.164.3.1.7.9.3.1.3 | ColumnvoipNumManipRuleIdx | not-accessible | current | This object represents the Rule index. |
| 1.3.6.1.4.1.164.3.1.7.9.3.1.4 | ColumnvoipNumManipRowStatus | read-create | current | This object enables the user to create/delete entries in this table. |
| 1.3.6.1.4.1.164.3.1.7.9.3.1.5 | ColumnvoipNumManipOriginalNumber | read-create | current | This object represents the original number (before manipulation). |
| 1.3.6.1.4.1.164.3.1.7.9.3.1.6 | ColumnvoipNumManipNewNumber | read-create | current | This object represents the new number (after manipulation). |
| 1.3.6.1.4.1.164.3.1.7.9.4 | NodevoipService | |||
| 1.3.6.1.4.1.164.3.1.7.9.4.1 | TablevoipServiceTable | not-accessible | current | Services table. |
| 1.3.6.1.4.1.164.3.1.7.9.4.1.1 | RowvoipServiceEntry | not-accessible | current | A row of Service table. |
| 1.3.6.1.4.1.164.3.1.7.9.4.1.1.1 | ColumnvoipServiceCfgIdx | not-accessible | current | The first index of the table. This object might represent the Configuration Index (1..100) being accessed; Index=255 relates to the TmpCnfg. For devices with m… |
| 1.3.6.1.4.1.164.3.1.7.9.4.1.1.2 | ColumnvoipServicePrtIdx | not-accessible | current | This object represents the Port Index. When irrelevant, value will be 1. |
| 1.3.6.1.4.1.164.3.1.7.9.4.1.1.3 | ColumnvoipServiceType | not-accessible | current | This object represents the Service's Type. |
| 1.3.6.1.4.1.164.3.1.7.9.4.1.1.4 | ColumnvoipServiceSupport | read-write | current | This object represents the Service's support. |
| 1.3.6.1.4.1.164.3.1.7.9.4.1.1.5 | ColumnvoipServiceCallForwardType | read-write | current | This object represents the Call Forward Type. It is relevant only for voipServiceType = callForward(1). |
| 1.3.6.1.4.1.164.3.1.7.9.4.1.1.6 | ColumnvoipServiceCallForwardPhoneNo | read-write | current | This object represents the Phone Number to be forwarded. It is relevant only for voipServiceType = callForward(1). |
| 1.3.6.1.4.1.164.3.1.7.9.4.1.1.7 | ColumnvoipServiceCallForwardNoReplyTimeout | read-write | current | This object indicates the No Reply Timeout in seconds. It means how many seconds with no reply should pass so that this period of time will be considered as No… |
| 1.3.6.1.4.1.164.3.1.7.9.4.1.1.8 | ColumnvoipServiceCallerIdType | read-write | current | This object represents the Caller ID Type. It is relevant only for voipServiceType = callerIdRestriction(3). |
| 1.3.6.1.4.1.164.3.1.7.9.4.1.1.9 | ColumnvoipServiceCallerIdDisplayString | read-write | current | This object represents the string that should be displayed when no restriction is applied. It is relevant only for voipServiceType = callerIdRestriction(3). |
| 1.3.6.1.4.1.164.3.1.7.9.4.2 | TablevoipFeatureTable | not-accessible | current | Feature table. |
| 1.3.6.1.4.1.164.3.1.7.9.4.2.1 | RowvoipFeatureEntry | not-accessible | current | A row of Feature table. |
| 1.3.6.1.4.1.164.3.1.7.9.4.2.1.1 | ColumnvoipFeatureCfgIdx | not-accessible | current | The first index of the table. This object might represent the Configuration Index (1..100) being accessed; Index=255 relates to the TmpCnfg. For devices with m… |
| 1.3.6.1.4.1.164.3.1.7.9.4.2.1.2 | ColumnvoipFeaturePrtIdx | not-accessible | current | This object represents the Port Index. When irrelevant, value will be 1. |
| 1.3.6.1.4.1.164.3.1.7.9.4.2.1.3 | ColumnvoipFeatureType | not-accessible | current | This object represents the Feature's Type. |
| 1.3.6.1.4.1.164.3.1.7.9.4.2.1.4 | ColumnvoipFeatureKeypadString | read-write | current | This object represents the Feature's Keypad string. This string is a combination of digits, * and #. |
| 1.3.6.1.4.1.164.3.1.7.9.5 | NodevoipNatTraversal | |||
| 1.3.6.1.4.1.164.3.1.7.9.5.1 | ScalarvoipNatTravIpAddress | read-write | current | This object indicates the NAT IP Address, given to the device (e.g. Vmux) It is used only in case of static NAT. |
| 1.3.6.1.4.1.164.3.1.7.9.5.2 | NodevoipNatTravStun | |||
| 1.3.6.1.4.1.164.3.1.7.9.5.2.1 | ScalarvoipNatTravStunServerAddress | read-write | current | This object indicates the STUN Server's IP/URL Address. |
| 1.3.6.1.4.1.164.3.1.7.9.5.2.2 | ScalarvoipNatTravStunBaseUdpPort | read-write | current | This object indicates the STUN Base UDP Port number. |
| 1.3.6.1.4.1.164.3.1.7.9.5.2.3 | ScalarvoipNatTravStunSipInterval | read-write | current | This object indicates the STUN Keep-Alive time interval (in seconds), for maintaining the SIP signaling port and IP address. |
| 1.3.6.1.4.1.164.3.1.7.9.5.2.4 | ScalarvoipNatTravStunRtpInterval | read-write | current | This object indicates the STUN Keep-Alive time interval (in seconds), for maintaining the RTP stream ports and IP addresses. |
| 1.3.6.1.4.1.164.3.2 | NodemuxHub | |||
| 1.3.6.1.4.1.164.3.2.0 | IdentitymuxHubEvents | current | The events for . | |
| 1.3.6.1.4.1.164.3.2.0.1 | NotificationalarmsTrap | current | This trap is sent whenever alarm occurs in the agent. | |
| 1.3.6.1.4.1.164.3.2.0.2 | NotificationsanityTrap | current | This trap is sent after a data base update. It returns the sanity result status and the configuration no. checked. If the result is of Flip DB Sanity Check, th… | |
| 1.3.6.1.4.1.164.3.2.0.3 | NotificationcnfgFlipTrap | current | This trap is sent upon change of the active Configuration DB. Attached, is the new active Configuration no. | |
| 1.3.6.1.4.1.164.3.2.0.4 | NotificationflipDbChangeTrap | current | This trap is sent upon change of the active Flip tables (Flip DB). | |
| 1.3.6.1.4.1.164.3.2.0.5 | NotificationstatusChangedTrap | current | This trap is sent upon any change of the LEDs status. | |
| 1.3.6.1.4.1.164.3.2.1 | NodeagnMux | |||
| 1.3.6.1.4.1.164.3.2.2 | NodemdlMux | |||
| 1.3.6.1.4.1.164.3.2.2.1 | NodecnfgMdlMux | |||
| 1.3.6.1.4.1.164.3.2.2.1.1 | NodemdlPbxFramerCnfg | |||
| 1.3.6.1.4.1.164.3.2.2.1.1.1 | TablemdlPbxFramerCnfgTable | not-accessible | current | This table contains parameters relevant to a module belonging to a digital voice system, except mdlPbxFraEnhEcho which is relevant also for analog cards. |
| 1.3.6.1.4.1.164.3.2.2.1.1.1.1 | RowmdlPbxFramerCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.2.1.1.1.1.1 | ColumnmdlPbxFraCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.2.1.1.1.1.2 | ColumnmdlPbxFraSltIdx | read-only | current | The slot relevant to this module. |
| 1.3.6.1.4.1.164.3.2.2.1.1.1.1.3 | ColumnmdlPbxFraEnhEcho | read-write | current | Refers to external ports of an analogue module and to the internal ports of the other mvc4 types of modules. ms16(3) means that the four voice ports have enhan… |
| 1.3.6.1.4.1.164.3.2.2.1.1.1.1.4 | ColumnmdlPbxFraTSGroupAss | read-write | current | In case of T1 modules: group1=(1,2,3,4), ...., group6=(21,22,23,24) while in case of E1 modules: - If prtExPh1MlLineType=g732sE1 or g732sE1CRC: group1=(1,2,3,4… |
| 1.3.6.1.4.1.164.3.2.2.1.1.1.1.5 | ColumnmdlPbxFraSignalMode | read-write | current | Refers to the signaling mode of the Framer module. tieTrunk(2), tieInvert(3), casTrans(4) are standard coding of the signaling protocol. casTrans(4) is Channel… |
| 1.3.6.1.4.1.164.3.2.2.1.1.1.1.6 | ColumnmdlPbxFraSignalVector | read-write | current | In the case of mdlPbxFraSignalMode = userDefined(5), this field defines the A,B,C Bits. D bit is supplied for future versions. Bit 1 = Bit A ON Hook - Local Bi… |
| 1.3.6.1.4.1.164.3.2.2.1.1.1.1.7 | ColumnmdlPbxFraSignalMask | read-write | current | In the case of mdlPbxFraSignalMode = userDefined(5), this field defines the 'don't care' A,B,C Bits. D bit is supplied for future versions. Bit 1 = Bit A ON Ho… |
| 1.3.6.1.4.1.164.3.2.2.1.1.1.1.8 | ColumnmdlPbxFraFramerSlot | read-write | current | Slot where is sitting the Framer. |
| 1.3.6.1.4.1.164.3.2.2.1.1.1.1.9 | ColumnmdlPbxFraSignaling | read-write | current | Signaling - describes the way the signaling ABCD bits pass from the local extension to the remote extension and vice-versa. endToEnd = the signaling ABCD bits … |
| 1.3.6.1.4.1.164.3.2.2.1.1.1.1.10 | ColumnmdlPbxFraTransSigTs | read-write | current | This is the Time Slot that is used for Transparent CCS signaling. The values of this TS are 1-24 for T1 & 1-31 for E1. The default for E1 is 16 & for T1 it is … |
| 1.3.6.1.4.1.164.3.2.2.1.2 | TablemdlProtIpTable | not-accessible | current | This table contains Protected IP Addresses for ML-IP cards when working in IP Ring Mode. |
| 1.3.6.1.4.1.164.3.2.2.1.2.1 | RowmdlProtIpEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.2.1.2.1.1 | ColumnmdlProtIpCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg being accessed. Idx 255 relates to the TmpCnfg. For Agents having several configuration, Write operation is allowe… |
| 1.3.6.1.4.1.164.3.2.2.1.2.1.2 | ColumnmdlProtIpSlotIdx | read-only | current | This attribute indicates a unique slot position where the module is inserted. In the 2104 Unit the entries io6(10)..io16) are not valid. |
| 1.3.6.1.4.1.164.3.2.2.1.2.1.3 | ColumnmdlProtIpAddress | read-only | current | A Protected IP address. |
| 1.3.6.1.4.1.164.3.2.2.1.2.1.4 | ColumnmdlProtIpRowStatus | read-create | current | This parameter allows creating/deleting entries of this table. |
| 1.3.6.1.4.1.164.3.2.2.2 | NodestatMdlMux | |||
| 1.3.6.1.4.1.164.3.2.2.2.1 | TablemdlStatTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.2.2.2.1.1 | RowmdlStatEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.2.2.1.1.1 | ColumnmdlStatSltIdx | read-only | current | A unique number to identify a slot position in the mux. In the 2104 Unit the entries psB(2),clB(4),io6(10)..io12(16) are not valid. |
| 1.3.6.1.4.1.164.3.2.2.2.1.1.2 | ColumnmdlStatHostIP | read-only | current | The host interface IP address when DHCP Client=Yes. This object is relevant only when DHCP Client=Yes |
| 1.3.6.1.4.1.164.3.2.2.2.1.1.3 | ColumnmdlStatHostMask | read-only | current | The host interface subnet mask when DHCP Client=Yes. This object is relevant only when DHCP Client=Yes |
| 1.3.6.1.4.1.164.3.2.2.2.1.1.4 | ColumnmdlStatDefaultGateway | read-only | current | Default Gateway's IP Address when DHCP Client=Yes. This object is relevant only when DHCP Client=Yes |
| 1.3.6.1.4.1.164.3.2.3 | NodeprtMux | |||
| 1.3.6.1.4.1.164.3.2.3.1 | NodestatPrtMux | |||
| 1.3.6.1.4.1.164.3.2.3.1.6 | TableprtSExHsfStatTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.2.3.1.6.1 | RowprtSExHsfStatEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.1.6.1.1 | ColumnprtSExHsfSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid. |
| 1.3.6.1.4.1.164.3.2.3.1.6.1.2 | ColumnprtSExHsfPrtIdx | read-only | current | This attribute indicates a unique port number. |
| 1.3.6.1.4.1.164.3.2.3.1.6.1.3 | ColumnprtSExHsfInterfaceTyp | read-only | current | This attribute indicates a unique interface type of a selected port. |
| 1.3.6.1.4.1.164.3.2.3.1.6.1.4 | ColumnprtSExHsfRts | read-only | current | This attribute indicates a unique RTS control signal state. |
| 1.3.6.1.4.1.164.3.2.3.1.16 | TableprtIsdnStatusTable | not-accessible | current | This table contains ISDN Statistics parameters that do not appear in the standard MIBs or for agents that don't support the standard Index of Call Set Up Time. |
| 1.3.6.1.4.1.164.3.2.3.1.16.1 | RowprtIsdnStatusEntry | not-accessible | current | Entries for ISDN Statistics parameters that do not appear in the standard MIBs or for agents that don't support the standard Index of Call Set Up Time. |
| 1.3.6.1.4.1.164.3.2.3.1.16.1.1 | ColumnprtIsdnStatusDspMode | read-only | current | The DSP can be in one of the following Modes: Voice, Idle, Fax, Voice Band Data (VBD)- Modem. |
| 1.3.6.1.4.1.164.3.2.3.1.16.1.2 | ColumnprtIsdnStatusCallState | read-only | current | The state that the current call is in. |
| 1.3.6.1.4.1.164.3.2.3.1.16.1.3 | ColumnprtIsdnStatusCallingNumber | read-only | current | This is the local Number (ISDN Address) associated with this entry. |
| 1.3.6.1.4.1.164.3.2.3.1.16.1.4 | ColumnprtIsdnStatusCalledNumber | read-only | current | This is the remote Number (ISDN Address) associated with this entry. |
| 1.3.6.1.4.1.164.3.2.3.1.16.1.5 | ColumnprtIsdnStatusCalledIP | read-only | current | This is the remote IP Address associated with this entry. |
| 1.3.6.1.4.1.164.3.2.3.1.16.1.6 | ColumnprtIsdnStatusCallDirection | read-only | current | Attribute indicating the Direction of the Call. The value of notApplicable will be used for example when prtIsdnStatusCallState = notActive(14). |
| 1.3.6.1.4.1.164.3.2.3.2 | NodecnfgPrtMux | |||
| 1.3.6.1.4.1.164.3.2.3.2.1 | NodeprtClCnfg | |||
| 1.3.6.1.4.1.164.3.2.3.2.1.1 | TableprtExClCnfgTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.2.3.2.1.1.1 | RowprtExClCnfgEntry | not-accessible | current | All the entries at this table are identical (have the same value) for all the configurations (1..100) except the TmpCnfg. The write operation into the Table Ob… |
| 1.3.6.1.4.1.164.3.2.3.2.1.1.1.1 | ColumnprtExClCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.1.1.1.2 | ColumnprtExClSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. Because the second Cl is only for redundancy, all the parameters are identical in t… |
| 1.3.6.1.4.1.164.3.2.3.2.1.1.1.3 | ColumnprtExClPrtIdx | read-only | current | This attribute indicates a unique port number. |
| 1.3.6.1.4.1.164.3.2.3.2.1.1.1.4 | ColumnprtExClUsage | read-only | current | This attribute indicates what is the usage of the port. |
| 1.3.6.1.4.1.164.3.2.3.2.1.1.1.5 | ColumnprtExClRate | read-only | current | This attribute indicates the operation rate of the port. |
| 1.3.6.1.4.1.164.3.2.3.2.1.1.1.6 | ColumnprtExClDataBits | read-only | current | This attribute indicates the number of data bits in async frame |
| 1.3.6.1.4.1.164.3.2.3.2.1.1.1.7 | ColumnprtExClParity | read-only | current | This attribute indicates if the parity operation mode in async frame |
| 1.3.6.1.4.1.164.3.2.3.2.1.1.1.8 | ColumnprtExClStopBits | read-only | current | This attribute indicates the minimum number of stop bits in the tx async frame |
| 1.3.6.1.4.1.164.3.2.3.2.1.1.1.9 | ColumnprtExClRoutingProtocol | read-only | current | This attribute indicates the routing protocol of the port. When prtExClUsage is nmsSlip or nmsPpp - all values are applicable . Else - only 'none' is applicabl… |
| 1.3.6.1.4.1.164.3.2.3.2.1.1.1.10 | ColumnprtExClEnabled | read-only | current | This attribute indicates if Ethernet port of CL is enabled or not for management. It is applicable only on the ETH port of the CL, when the MP includes an ML-I… |
| 1.3.6.1.4.1.164.3.2.3.2.2 | NodeprtPh1MlCnfg | |||
| 1.3.6.1.4.1.164.3.2.3.2.2.1 | TableprtExPh1MlCnfgTable | not-accessible | current | - For products supporting more than one configuration, the write operation into the Table is valid only to the TmpCnfg entry. - For products that do not suppor… |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1 | RowprtExPh1MlCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.1 | ColumnprtExPh1MlCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.2 | ColumnprtExPh1MlSltIdx | read-only | current | This attribute indicates a unique slot position where the module is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid. For the Vmux2100 Main … |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.3 | ColumnprtExPh1MlPrtIdx | read-only | current | This attribute indicates a unique port number. MP-2100/2200: MTML-1/E1 and MTML-1/T1 cards have only one external interface. inPrt1, inPrt2 - for MTML-H/2E1 an… |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.4 | ColumnprtExPh1MlConnect | read-write | current | This attribute indicates whether the port should be considered in any of the mux algorithms. It also affects all the card considerations because it may indicat… |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.5 | ColumnprtExPh1MlLineType | read-write | current | |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.6 | ColumnprtExPh1MlLineCode | read-write | current | This attribute is the line code parameter used for T1/E1 interface. The user should select only the parameters which are relevant to the specific card: T1 line… |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.7 | ColumnprtExPh1MlLineLen | read-write | current | This attribute is the line length parameter used only for T1/DSU interfaces. lenXXXpXXXft = len-XXX-XXXft. |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.8 | ColumnprtExPh1MlRestoreTime | read-write | current | The time passing from the disappearance of the loss of synchronization condition (red alarm) to the restoration of normal service. The options 1secFast(2) and … |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.9 | ColumnprtExPh1MlTxGain | read-write | current | This attribute is the tx gain parameter used only for T1/CSU interfaces. |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.10 | ColumnprtExPh1MlRxSensitivity | read-write | current | This attribute is the rx line sensitivity parameter. low26dBm, high36dBm - applicable for T1-CSU shortHaul, longHaul - applicable for MTML-4 cards low15dbm was… |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.11 | ColumnprtExPh1MlIdleCode | read-write | current | Determines the code for transmission in empty time slots. Type value(00-FFH), Excluding 0H,8H,10H,12H,21H,24H,42H,49H, 84H,92H |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.12 | ColumnprtExPh1MlTdmTrunk | read-write | current | This attribute indicates whether the port is used to transfer TDM cards data and through which Bus. |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.13 | ColumnprtExPh1MlClkMode | read-write | current | Defines the clock operation mode of the T1/E1 interface. Ports that are connected to the TDM Buses must be in nodalTiming(3) clock mode. |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.14 | ColumnprtExPh1MlMfClkSrcSlt | read-write | current | This attribute indicates whether the port Tx multiframe is synchronized with Rx multiframe of another port and the slot position of that port. This operation i… |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.15 | ColumnprtExPh1MlMfClkSrcPrt | read-write | current | A unique number to identify a port position in the mux. It has no effect when the prtExPh1MlMfClkSrcSlt selected is Local. inPrt1 - for MTML-H/E1 cards. |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.16 | ColumnprtExPh1MlFdlType | read-write | current | A unique number to identify the side of the FDL operation. Normal: 'response' for the user side and 'command' for the PTT side. Applicable only when working wi… |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.17 | ColumnprtExPh1MlInbandMng | read-write | current | A unique number to identify an Inband management over the link. |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.18 | ColumnprtExPh1MlInbandMngRate | read-write | current | A unique number to identify the rate of the Inband management (Kbps). E1 port - it is not applicable when prtExPh1MlInbandMng selected is off. T1 port - it is … |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.19 | ColumnprtExPh1MlRedundType | read-write | current | This object determines the ML redundancy type: none - no ML redundacy dualCableAIS - each ML card is connected by a separate dualCableParallelTx cable to the o… |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.20 | ColumnprtExPh1MlRedundSlot | read-write | current | This object indicates the slot containing the redundacy ML card, coupled with the current ML (prtExPh1MlSltIdx). When prtExPh1MlRedundType=none (no ML redundan… |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.21 | ColumnprtExPh1MlRedundPort | read-write | current | This object indicates the redundacy ML port, coupled with the current ML port (prtExPh1MlPrtIdx). When prtExPh1MlRedundType=none (no ML redundancy) this object… |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.22 | ColumnprtExPh1MlRedundRecTime | read-write | current | Redundancy Recovery Time (sec). After switching the ML card to the current (prtExPh1MlSltIdx), the next ML switch can be performed only after a minimum time, i… |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.23 | ColumnprtExPh1MlInbandMngRoutProt | read-write | current | This attribute indicates the Inband Mng routing protocol of the port. |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.24 | ColumnprtExPh1MlIfType | read-write | current | Interface type of the port. For T1 - csu, dsu are the valid values For E1 - dsu, ltu are the valid values. |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.25 | ColumnprtExPh1MlMultiplier | read-write | current | The data rate of each TS. The multiplier values can be 56 kbps or 64 kbps. |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.26 | ColumnprtExPh1MlSupportedTS | read-only | current | Number of Supported Time Slots by the agent. For Vmux-110 there is HW that supports less than 31/24 Time Slots for the E1/T1 port. |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.27 | ColumnprtExPh1MlImpedance | read-write | current | The Line Impedance. For T1 (always balanced), impedance is 100 ohm. For E1: - balanced = 120 ohm - unbalanced = 75 ohm. |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.28 | ColumnprtExPh1MlQ50BwControl | read-write | current | This object enables configuration of Q.50 Bandwidth Control on the port. If the bandwidth exceeds a certain threshold it is possible to disable new calls in th… |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.29 | ColumnprtExPh1MlQ50SignalPair | read-write | current | Q.50 Signaling bits Pair that is currently in use: A&B bits or C&D bits. For Annex B it will always be: aAndB (2). |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.30 | ColumnprtExPh1MlInternalSwitch | read-write | current | This parameter shows whether the data will be transferred from one port to the other port within the same group of 2 ports. The default value is: Enable. Disab… |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.31 | ColumnprtExPh1MlSigService | read-write | current | Signaling Service given by this link. notApplicable - for T1 links normal - usual Signaling advanced - V5 Signaling. |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.32 | ColumnprtExPh1MlFragmentSize | read-write | current | This parameter indicates the maximum number of bytes permitted in a packet send over the Link. Exceeding this size will cause packet fragmentation. |
| 1.3.6.1.4.1.164.3.2.3.2.2.2 | TableprtExPh1MlTsTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry, except prtExPh1MlTsTest that will be written directly to the Active Configuratio… |
| 1.3.6.1.4.1.164.3.2.3.2.2.2.1 | RowprtExPh1MlTsEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.2.2.1.1 | ColumnprtExPh1MlTsCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.2.2.1.2 | ColumnprtExPh1MlTsSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid. For the Vmux2100 Main Bo… |
| 1.3.6.1.4.1.164.3.2.3.2.2.2.1.3 | ColumnprtExPh1MlTsPrtIdx | read-only | current | This attribute indicates a unique port number. MPH.1/E1 and MPH.1/T1 cards have only one external interface. exPrt2 - for ME1-2, MT1-2 and mhsPri cards. exPrt3… |
| 1.3.6.1.4.1.164.3.2.3.2.2.2.1.4 | ColumnprtExPh1MlTsIdx | read-only | current | This attribute indicates a unique time slot position. The valid time slots are 1..24 for T1 Card and 1..31 for E1 interface. In G732S-E1 lines time slot 16 is … |
| 1.3.6.1.4.1.164.3.2.3.2.2.2.1.5 | ColumnprtExPh1MlTsIConSlot | read-write | current | This attribute indicates whether the specified time slot is connected/routed internally in the Agent and to which card it is connected. In the ?004 Unit the en… |
| 1.3.6.1.4.1.164.3.2.3.2.2.2.1.6 | ColumnprtExPh1MlTsIConPrt | read-write | current | This attribute indicates the internally (In Mux) connected/routed port. For MP, the values will be: { exPrt1 (1) , exPrt2 (2) , exPrt3 (3) , exPrt4 (4) , exPrt… |
| 1.3.6.1.4.1.164.3.2.3.2.2.2.1.7 | ColumnprtExPh1MlTsIConTs | read-write | current | This attribute indicates a unique time slot position. The valid time slots are 1..24 for T1 Card and 1..31 for E1 interface. In G732S-E1 lines time slot 16 is … |
| 1.3.6.1.4.1.164.3.2.3.2.2.2.1.8 | ColumnprtExPh1MlTsExt | read-only | current | A pointer to an extension of this table: prtExTsSplitTable. - If prtExPh1MlTsIConSlot='split', its value should be set to the OBJECT IDENTIFIER of the prtExTsS… |
| 1.3.6.1.4.1.164.3.2.3.2.2.2.1.9 | ColumnprtExPh1MlTsTest | read-write | current | This attribute indicates a test to be activated on the selected TS. It is applicable only when prtSTstCmd=testPerTS(31). notApplicable - when prtSTstCmd is NOT… |
| 1.3.6.1.4.1.164.3.2.3.2.2.2.1.10 | ColumnprtExPh1MlTsType | read-write | current | The Time Slot Type. Transparent - means that the Time Slot will be Rx/Tx as is without processing it. If the device requires more than 1 unique data or ss7 Tim… |
| 1.3.6.1.4.1.164.3.2.3.2.2.2.1.11 | ColumnprtExPh1MlTsBundle | read-write | current | The number of the bundle containing this Time Slot. If no bundle exists for this TS or the bundle number is irrelevant, the value will be 0. |
| 1.3.6.1.4.1.164.3.2.3.2.2.2.1.12 | ColumnprtExPh1MlTsTestDuration | read-write | current | This attribute indicates the maximum duration of executing a test on the specific TS. This entry applies to all the test operations. For the Vmux2100 the value… |
| 1.3.6.1.4.1.164.3.2.3.2.2.2.1.13 | ColumnprtExPh1MlTsSubChType | read-write | current | The Time Slot Sub-Channel Type. This variable is relevant only when Time-Slot Type is SubCh (e.g. prtExPh1MlTsType = subCh1...subCh8). |
| 1.3.6.1.4.1.164.3.2.3.2.2.2.1.14 | ColumnprtExPh1MlTsSubChMask | read-write | current | The Sub-Channel Type Mask. This variable is relevant only when Time-Slot Type is SubCh (e.g. prtExPh1MlTsType = subCh1...subCh8). |
| 1.3.6.1.4.1.164.3.2.3.2.2.2.1.15 | ColumnprtExPh1MlTsChRate | read-write | current | The Rate of the Signaling Channel. notApplicable(1) when TS Type is other than Signaling or Transparent |
| 1.3.6.1.4.1.164.3.2.3.2.2.2.1.16 | ColumnprtExPh1MlTsByteReversal | read-write | current | Byte Reversal. This variable defines whether the LSB or MSB is transmitted first. no(2) - MSB is transmitted first yes(3) - LSB is transmitted first. |
| 1.3.6.1.4.1.164.3.2.3.2.2.2.1.17 | ColumnprtExPh1MlTsSigProfile | read-write | current | This object indicates the Signaling Profile of the port. It is applicable only when prtMl4SigProfile=perTS. p1 = profile 1 p2 = profile 2 p3 = profile 3 p4 = p… |
| 1.3.6.1.4.1.164.3.2.3.2.2.3 | TableprtInPh1MlCnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1 | RowprtInPh1MlCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.1 | ColumnprtInPh1MlCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.2 | ColumnprtInPh1MlSltType | read-only | current | This attribute indicates a unique slot position where the card is inserted. For ISDN BRI port of MX300/30: io1(5) = isdn1(5) and io2(6) = isdn2(6) In the ?004 … |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.3 | ColumnprtInPh1MlPrtIdx | read-only | current | This attribute indicates a unique port number. MPH.1/E1 and MPH.1/T1 cards have three internal interfaces. MX3000 modules may have up to 50 internal ports. |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.4 | ColumnprtInPh1MlConnect | read-write | current | This attribute indicates whether the port should be considered in any of the mux algorithms. |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.5 | ColumnprtInPh1MlRate | read-write | current | This attribute indicates the port speed. |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.6 | ColumnprtInPh1MlProtocol | read-write | current | This attribute indicates the applied protocol. |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.7 | ColumnprtInPh1MlConnectionTyp | read-write | current | This attribute indicates the link connection type. It is required for three reasons: FR/CR Inband management operation (LMI,CLMM...). CIR check. NMS network ma… |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.8 | ColumnprtInPh1MlCongResponse | read-write | current | This attribute indicates how to handle the congestion indication to/from the mux internal connection side (for example transmit/receive becn to/from the networ… |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.9 | ColumnprtInPh1MlCongLevel | read-write | current | This attribute indicates the level of delayed data in precents of the total available dynamic memory, for which the port will start to operate . The resolution… |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.10 | ColumnprtInPh1MlTc | read-write | current | This attribute indicates the Tc parameter which is the time period of the sliding window in which the Bc/Be are tested. The value of this parameter is identica… |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.11 | ColumnprtInPh1MlFlowControl | read-write | current | This attribute indicates the required flow control betweeen the port and the remote equipment. |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.12 | ColumnprtInPh1MlSegment | read-write | current | This object is the Segmentation in Bytes. In protocol FR+, ISDN internals, MX 30/300 the segmentation is: 50 (2) ,158 (3) ,266 (4) ,376 (5), 484 (6) In MX 3000… |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.13 | ColumnprtInPh1MlFrMngProt | read-write | current | This object indicates the Frame-Relay management protocol. ansiT1 = ANSI T1.617 Annex D (this is the default value). This parameter is applicable only for FR a… |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.14 | ColumnprtInPh1MlEnqPeriod | read-write | current | This object is the Status Enquiry Period, in seconds. It determines the frequency of the Status Enquiry message as sent by the FR user side. At the FR network … |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.15 | ColumnprtInPh1MlFullRptPeriod | read-write | current | This object is the Full Report Frequency. It determines the number of the Status Enquiry messages sent by the FR user side, before a Full Report Request is sen… |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.16 | ColumnprtInPh1MlFrWindowSize | read-write | current | This object is the FR Window Size. It determines the number of samplings in the sliding window that counts the errors. This parameter is applicable only for FR… |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.17 | ColumnprtInPh1MlErrorsThreshold | read-write | current | This object is the Max Errors. It determines the number of Status Enquiry Errors that occured within the FR sliding window, before this port is considered DOWN… |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.18 | ColumnprtInPh1MlMaxIdleTime | read-write | current | Move to higher prioritized connected link after this period of seconds of silence on the current link. 0=Never. Never move to higher prioritized connected link… |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.19 | ColumnprtInPh1MlBearerCh | read-write | current | Defines which B (bearer) channels are used for transferring ISDN data. Default value is: none (255). anyChannel (2) is skipped because it is not in use here. |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.20 | ColumnprtInPh1MlAssociatedExCh | read-write | current | This object indicates the external port associated to this internal port. At present, it is used by the Hybrid (mp2100h), MHS-4 cards which can have up to 64 d… |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.21 | ColumnprtInPh1MlClockEncoding | read-write | current | This object is the Encoding type of the Line. This parameter is applicable only for FR and FR+ protocols. |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.22 | ColumnprtInPh1MlMinSeparators | read-write | current | Minimum number of bytes separating between two adjacent frames (HDLC item). 0 = notApplicable |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.23 | ColumnprtInPh1MlCcittCrc | read-write | current | This object indicates how many Bits are used for CRC (HDLC item). |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.24 | ColumnprtInPh1MlFrameSeparator | read-write | current | This object indicates what should be transferred on the line when there are no frames to pass (HDLC item). idles: mean that FF will pass on the line flags: mea… |
| 1.3.6.1.4.1.164.3.2.3.2.2.4 | TableprtInPh1MlDlciTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.2.4.1 | RowprtInPh1MlDlciEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.2.4.1.1 | ColumnprtInPh1MlDlciCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.2.4.1.2 | ColumnprtInPh1MlDlciSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid |
| 1.3.6.1.4.1.164.3.2.3.2.2.4.1.3 | ColumnprtInPh1MlDlciPrtIdx | read-only | current | This attribute indicates a unique internal port number. MPH.1/E1 and MPH.1/T1 cards have three internal ports. |
| 1.3.6.1.4.1.164.3.2.3.2.2.4.1.4 | ColumnprtInPh1MlDlciIdx | read-only | current | This attribute indicates a unique index for each possible used dlci(16..991). When the protocol is not Multiplexing protocol, then its type is 'user' and the o… |
| 1.3.6.1.4.1.164.3.2.3.2.2.4.1.5 | ColumnprtInPh1MlDlciValid | read-write | current | This attribute indicates whether the attributes in this entry are valid or not. The user can add/delete pvc (dlci to dlci connection) by modifing this object |
| 1.3.6.1.4.1.164.3.2.3.2.2.4.1.6 | ColumnprtInPh1MlDlciIConSlt | read-write | current | This attribute indicates a unique slot position In the Mux (Agent) where the dlci is routed to. In the ?004 Unit the entries io6(10)..io16) are not valid |
| 1.3.6.1.4.1.164.3.2.3.2.2.4.1.7 | ColumnprtInPh1MlDlciIConPrt | read-write | current | This attribute indicates a unique port id which the dlci is routed to. |
| 1.3.6.1.4.1.164.3.2.3.2.2.4.1.8 | ColumnprtInPh1MlDlciIConDlci | read-write | current | This attribute indicates a unique internal connection dlci number which the src dlci is routed to. |
| 1.3.6.1.4.1.164.3.2.3.2.2.4.1.9 | ColumnprtInPh1MlDlciTxBc | read-write | current | This attribute indicates a unique Tx committed bandwidth on the user transmit line or at the port receive line. |
| 1.3.6.1.4.1.164.3.2.3.2.2.4.1.10 | ColumnprtInPh1MlDlciTxBe | read-write | current | This attribute indicates a unique Tx excess bandwidth on the user transmit line or at the port receive line. |
| 1.3.6.1.4.1.164.3.2.3.2.2.4.1.11 | ColumnprtInPh1MlDlciRxBc | read-write | current | This attribute indicates a unique Rx committed bandwidth on the user receive line or at the port transmit line. |
| 1.3.6.1.4.1.164.3.2.3.2.2.4.1.12 | ColumnprtInPh1MlDlciRxBe | read-write | current | This attribute indicates a unique Rx excess bandwidth on the user receive line or at the port transmit line. |
| 1.3.6.1.4.1.164.3.2.3.2.2.4.1.13 | ColumnprtInPh1MlDlciPriority | read-write | current | This attribute indicates a unique priority of the pcv. 1 is the lowest priority and 8 is the highest priority. |
| 1.3.6.1.4.1.164.3.2.3.2.2.4.1.14 | ColumnprtInPh1MlDlciStatus | read-only | current | This attribute indicates the status of the pvc. The status is disconnected(1) when one of the sides is programmed as not connected |
| 1.3.6.1.4.1.164.3.2.3.2.2.5 | TableprtPhMlCnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.2.5.1 | RowprtPhMlCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.2.5.1.1 | ColumnprtPhMlCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.2.5.1.2 | ColumnprtPhMlSltIdx | read-only | current | This attribute indicates a unique slot position where the module is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. For the Vmux2100 Ma… |
| 1.3.6.1.4.1.164.3.2.3.2.2.5.1.3 | ColumnprtPhMlPrtIdx | read-only | current | This attribute indicates a unique port number. ML-20 cards have just one external interface. |
| 1.3.6.1.4.1.164.3.2.3.2.2.5.1.4 | ColumnprtPhMlConnect | read-write | current | This attribute indicates whether the port should be considered in any of the mux algorithms. |
| 1.3.6.1.4.1.164.3.2.3.2.2.5.1.5 | ColumnprtPhMlRate | read-write | current | This attribute indicates the configured port speed. auto - rate is adapted automatically to the attached modem rate. |
| 1.3.6.1.4.1.164.3.2.3.2.2.5.1.6 | ColumnprtPhMlCAS | read-write | current | This attribute indicates whether Channel Associated Signaling (CAS) is used. |
| 1.3.6.1.4.1.164.3.2.3.2.2.5.1.7 | ColumnprtPhMlClockMode | read-write | current | Clock mode. |
| 1.3.6.1.4.1.164.3.2.3.2.2.5.1.8 | ColumnprtPhMlSatBuffer | read-write | current | Satellite Buffer (+/- 256). |
| 1.3.6.1.4.1.164.3.2.3.2.2.5.1.9 | ColumnprtPhMlDialProcess | read-write | current | Dial Process. |
| 1.3.6.1.4.1.164.3.2.3.2.2.5.1.10 | ColumnprtPhMlSyncRestore | read-write | current | Sync Restoration time, in seconds. notApplicable=0. |
| 1.3.6.1.4.1.164.3.2.3.2.2.5.1.11 | ColumnprtPhMlBus | read-write | current | The TDM BUS this port is linked to. |
| 1.3.6.1.4.1.164.3.2.3.2.2.5.1.12 | ColumnprtPhMlMfSyncSlot | read-write | current | This attribute indicates whether the sync is synchronized according to a certain card and the slot of this card. This operation is required in order to bypass … |
| 1.3.6.1.4.1.164.3.2.3.2.2.5.1.13 | ColumnprtPhMlClockSource | read-write | current | The Clock Source: TC (Tx Clock) or RC (Rx Clock) signals. |
| 1.3.6.1.4.1.164.3.2.3.2.2.5.1.14 | ColumnprtPhMlErrCorrection | read-write | current | This object indicates if Error Correction mechanism should be applied or not. It will be applicable only if the interface HW includes the Error Correction chip. |
| 1.3.6.1.4.1.164.3.2.3.2.2.5.1.15 | ColumnprtPhMlCorrectionMode | read-write | current | This object is applicable only when prtPhMlErrCorrection=yes. random - enables to correct up to 3 random errors in an 23 bit frame built from 12 data bits and … |
| 1.3.6.1.4.1.164.3.2.3.2.2.5.1.16 | ColumnprtPhMlControlSignals | read-write | current | This object shows whether the Port will ignore or implement the control signals like DCD, CTS, DTR. |
| 1.3.6.1.4.1.164.3.2.3.2.2.5.1.17 | ColumnprtPhMlInterfaceType | read-write | current | The SW Configurable Interface Type. |
| 1.3.6.1.4.1.164.3.2.3.2.2.5.1.18 | ColumnprtPhMlClockPolarity | read-write | current | This object indicates the clock polarity. |
| 1.3.6.1.4.1.164.3.2.3.2.3 | NodeprtPhPlCnfg | |||
| 1.3.6.1.4.1.164.3.2.3.2.3.1 | TableprtExPhPlCnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1 | RowprtExPhPlCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.1 | ColumnprtExPhPlCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.2 | ColumnprtExPhPlSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.3 | ColumnprtExPhPlPrtIdx | read-only | current | This attribute indicates a unique port number. In case of PH.1 card, only exPrt(1) is valid. |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.4 | ColumnprtExPhPlConnect | read-write | current | This attribute indicates whether the port should be considered in any of the mux algorithms. |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.5 | ColumnprtExPhPlHRate | read-write | current | |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.6 | ColumnprtExPhPlLRate | read-write | current | |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.7 | ColumnprtExPhPlProtocol | read-write | current | This object indicates the applied protocol. |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.8 | ColumnprtExPhPlConnectionTyp | read-write | current | This attribute indicates the link connection type. It is required for three reasons: FR/CR Inband management opration (LMI,CLMM...). CIR check. NMS network man… |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.9 | ColumnprtExPhPlClkMode | read-write | current | Clock mode. |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.10 | ColumnprtExPhPlDceClkSrc | read-write | current | This attribute indicates the source of the clock when working in dce or ext-dce clock mode. notApplicable(1) - is applied for dte(3) and lbt(5) clock modes. Wh… |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.11 | ColumnprtExPhPlCongResponse | read-write | current | This attribute indicates how to handle the congestion indication to/from the mux internal connection side (for example transmit/received becn to/from the netwo… |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.12 | ColumnprtExPhPlCongLevel | read-write | current | This attribute indicates the level of delayed data in precents of total available dynamic memory, for which the port will start to operate as congested. The re… |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.13 | ColumnprtExPhPlTc | read-write | current | This attribute indicates the Tc parameter which is the time period of the sliding window in which the Bc/Be are tested. The value of this parameter is identica… |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.14 | ColumnprtExPhPlFlowControl | read-write | current | This attribute indicates the required flow control betweeen the port and the remote equipment. fecnBecn - is valid only for FR, FR+ and CR protocols. xonXoff,d… |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.15 | ColumnprtExPhPlDcdRts | read-write | current | Protocol may require end to end connect indication over the network. End to end link connection establishment over the FR network will be indicated to the user… |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.16 | ColumnprtExPhPlDcdRtsControlPath | read-write | current | Protocol may require end to end connect indication over the network. This parameter defines whether to take the user connection status (RTS(DCE)/DCD(DTE)) and … |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.17 | ColumnprtExPhPlDataBits | read-write | current | This attribute indicates the number of data bits in async frame. It is relevant only for Async protocols. |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.18 | ColumnprtExPhPlParity | read-write | current | This attribute indicates the parity operation mode in async frame. It is relevant only for Async protocols. |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.19 | ColumnprtExPhPlStopBits | read-write | current | This attribute indicates the minimum number of stop bits in the tx async frame. It is relevant only for Async protocols. |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.20 | ColumnprtExPhPlLXon | read-write | current | This attribute indicates the character used as X-On to notify receive enable. This parameter is valid only for async protocols. Valid values: 0..255. The value… |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.21 | ColumnprtExPhPlLXoff | read-write | current | This attribute indicates the character used as X-Off to notify receive disable. This parameter is valid only for async protocols. Valid values: 0..255. The val… |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.22 | ColumnprtExPhPlFrMngProt | read-write | current | This object indicates the Frame-Relay management protocol. ansiT1 = ANSI T1.617 Annex D (this is the default value). This parameter is applicable only for FR a… |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.23 | ColumnprtExPhPlEnqPeriod | read-write | current | This object is the Status Enquiry Period, in seconds. It determines the frequency of the Status Enquiry message as sent by the FR user side. At the FR network … |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.24 | ColumnprtExPhPlFullRptPeriod | read-write | current | This object is the Full Report Frequency. It determines the number of the Status Enquiry messages sent by the FR user side, before a Full Report Request is sen… |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.25 | ColumnprtExPhPlFrWindowSize | read-write | current | This object is the FR Window Size. It determines the number of samplings in the sliding window that counts the errors. This parameter is applicable only for FR… |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.26 | ColumnprtExPhPlErrorsThreshold | read-write | current | This object is the Max Errors. It determines the number of Status Enquiry Errors that occured within the FR sliding window, before this port is considered DOWN… |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.27 | ColumnprtExPhPlPvcCreateMsg | read-write | current | This object is Update Message (if required or not). It determines whether a message of a New PVC Creation is requested or not (yes/no). Default = no. This para… |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.28 | ColumnprtExPhPlCllmMsg | read-write | current | This object is CLLM Message (if required or not). It determines whether to send (or not) a congestion message when the port is Rx congested. Default = no. This… |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.29 | ColumnprtExPhPlProtDelayLevel | read-write | current | This object is the Segmentation in Bytes. In some cases, the enumerated values will mean other segmentation values than specified: Product: MX-3000 MX-3000 MX-… |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.30 | ColumnprtExPhPlClockEncoding | read-write | current | This object is the Encoding type of the Line. This parameter is applicable only for FR and FR+ protocols. For MAXCESS 3000 & MP2100H: when setting to nrzI (3) … |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.31 | ColumnprtExPhPlMinSeparators | read-write | current | Minimum number of bytes separating between two adjacent frames (HDLC item). 0 = notApplicable |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.32 | ColumnprtExPhPlCcittCrc | read-write | current | This object indicates how many Bits are used for CRC (HDLC item). |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.33 | ColumnprtExPhPlFrameSeparator | read-write | current | This object indicates what should be transferred on the line when there are no frames to pass (HDLC item). idles: mean that FF will pass on the line flags: mea… |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.34 | ColumnprtExPhPlIdleCode | read-write | current | Determines the code for transmission when there are no frames to transmit on the line. The value should be 0 to FFH. |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.35 | ColumnprtExPhPlJitter | read-write | current | Maximum variant delay of the FR network, in msec. |
| 1.3.6.1.4.1.164.3.2.3.2.3.2 | TableprtExPhPlDlciTable | not-accessible | current | The write operation into the Table Objects is valid only at the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.3.2.1 | RowprtExPhPlDlciEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.3.2.1.1 | ColumnprtExPhPlDlciCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.3.2.1.2 | ColumnprtExPhPlDlciSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid |
| 1.3.6.1.4.1.164.3.2.3.2.3.2.1.3 | ColumnprtExPhPlDlciPrtIdx | read-only | current | This attribute indicates a unique internal port number. PH.1/E1 and PH.1/T1 cards have three internal ports. Stand-alone units may have six such ports. |
| 1.3.6.1.4.1.164.3.2.3.2.3.2.1.4 | ColumnprtExPhPlDlciIdx | read-only | current | This attribute indicates a unique index for each possible used dlci(16..991). When the protocol is not Multiplexing protocol, its type is 'user' and the only v… |
| 1.3.6.1.4.1.164.3.2.3.2.3.2.1.5 | ColumnprtExPhPlDlciValid | read-write | current | This attribute indicates whether the attributes in this entry are valid or not. The user can add/delete pvc (dlci to dlci connection) by modifing this object |
| 1.3.6.1.4.1.164.3.2.3.2.3.2.1.6 | ColumnprtExPhPlDlciIConSlt | read-write | current | This attribute indicates a unique slot position In the Mux (Agent) where the dlci is routed to. cl - will represent any of the CL slots. This value can be sele… |
| 1.3.6.1.4.1.164.3.2.3.2.3.2.1.7 | ColumnprtExPhPlDlciIConPrt | read-write | current | This attribute indicates a unique port id which the dlci is routed to. clNMS - will be used for NMS SNMP messages. It can be any port of the CL card. This valu… |
| 1.3.6.1.4.1.164.3.2.3.2.3.2.1.8 | ColumnprtExPhPlDlciIConDlci | read-write | current | This attribute indicates a unique internal connection dlci number, the dlci is routed to. |
| 1.3.6.1.4.1.164.3.2.3.2.3.2.1.9 | ColumnprtExPhPlDlciTxBc | read-write | current | This attribute indicates a unique Tx committed bandwidth on the user transmit line (or at the port receive line). |
| 1.3.6.1.4.1.164.3.2.3.2.3.2.1.10 | ColumnprtExPhPlDlciTxBe | read-write | current | This attribute indicates a unique Tx excess bandwidth on the user transmit line (or at the port receive line). |
| 1.3.6.1.4.1.164.3.2.3.2.3.2.1.11 | ColumnprtExPhPlDlciRxBc | read-write | current | This attribute indicates a unique Rx committed bandwidth on the user receive line (or at the port transmit line). |
| 1.3.6.1.4.1.164.3.2.3.2.3.2.1.12 | ColumnprtExPhPlDlciRxBe | read-write | current | This attribute indicates a unique Rx excess bandwidth on the user receive line (or at the port transmit line). |
| 1.3.6.1.4.1.164.3.2.3.2.3.2.1.13 | ColumnprtExPhPlDlciPriority | read-write | current | This attribute indicates a unique priority of the pcv. 1 is the lowest priority and 8 is the highest priority. |
| 1.3.6.1.4.1.164.3.2.3.2.3.2.1.14 | ColumnprtExPhPlDlciStatus | read-only | current | This attribute indicates the status of the pvc. The status is disconnected(1) when one of the sides is programmed as not connected |
| 1.3.6.1.4.1.164.3.2.3.2.3.3 | TableprtExPhPlModemTable | not-accessible | current | External Modem Parameters. The write operation into the Table Objects is valid only for the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.3.3.1 | RowprtExPhPlModemEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.3.3.1.1 | ColumnprtExPhPlModemCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.3.3.1.2 | ColumnprtExPhPlModemSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid |
| 1.3.6.1.4.1.164.3.2.3.2.3.3.1.3 | ColumnprtExPhPlModemPrtIdx | read-only | current | This attribute indicates a unique port number. In case of PH.1 card, only exPrt(1) is valid. |
| 1.3.6.1.4.1.164.3.2.3.2.3.3.1.4 | ColumnprtExPhPlModemStatus | read-write | current | This object indicates whether a Dial Up Modem is enabled on this port. Default: disable For Vmux devices this object shows whether there is Modem Relay support. |
| 1.3.6.1.4.1.164.3.2.3.2.3.3.1.5 | ColumnprtExPhPlModemActivate | read-write | current | This object indicates whether the Dial Up Modem is activated when the first frame is received or it is always activated. Default: onFirstFrame |
| 1.3.6.1.4.1.164.3.2.3.2.3.3.1.6 | ColumnprtExPhPlModemMaxIdleTime | read-write | current | Max Time allowed in Seconds without any traffic before the line is disconnected. Legal Values are: 1 sec, 2 sec .. 5 sec, 10 sec, 20 sec.. 1 min, 2 min .. 10 m… |
| 1.3.6.1.4.1.164.3.2.3.2.3.3.1.7 | ColumnprtExPhPlModemTimeBtwnCalls | read-write | current | Minimum Time in Seconds which is required after a call was disconnected. In this time no other call will be initiated from this Modem port even if there were f… |
| 1.3.6.1.4.1.164.3.2.3.2.3.3.1.8 | ColumnprtExPhPlModemCallDelay | read-write | current | Time in Seconds that the device will wait before dialing to the remote device. This feature is mostly used when there is a backup modem to the main link and th… |
| 1.3.6.1.4.1.164.3.2.3.2.4 | NodeprtLs2Cnfg | |||
| 1.3.6.1.4.1.164.3.2.3.2.4.1 | TableprtExLs2CnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.4.1.1 | RowprtExLs2CnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.4.1.1.1 | ColumnprtExLs2CnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg |
| 1.3.6.1.4.1.164.3.2.3.2.4.1.1.2 | ColumnprtExLs2SltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid. |
| 1.3.6.1.4.1.164.3.2.3.2.4.1.1.3 | ColumnprtExLs2PrtIdx | read-only | current | This attribute indicates a unique port index. For the Ls2/X.58 exPrt(7)..exPrt(10) are not valid. |
| 1.3.6.1.4.1.164.3.2.3.2.4.1.1.4 | ColumnprtExLs2Connect | read-write | current | This attribute indicates whether the port should be considered in any of the mux algorithms. |
| 1.3.6.1.4.1.164.3.2.3.2.4.1.1.5 | ColumnprtExLs2Rate | read-write | current | Port rates. |
| 1.3.6.1.4.1.164.3.2.3.2.4.1.1.6 | ColumnprtExLs2ClkMode | read-write | current | This attribute indicates a unique port operation clock mode. |
| 1.3.6.1.4.1.164.3.2.3.2.4.1.1.7 | ColumnprtExLs2Cts | read-write | current | CTS. |
| 1.3.6.1.4.1.164.3.2.3.2.4.1.1.8 | ColumnprtExLs2Dcd | read-write | current | DCD. |
| 1.3.6.1.4.1.164.3.2.3.2.4.1.1.9 | ColumnprtExLs2EnvIdx | read-write | current | Envelope Index. When prtInLs2EnvAssign=auto, the value is 0 (not applicable). |
| 1.3.6.1.4.1.164.3.2.3.2.4.2 | TableprtInLs2CnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.4.2.1 | RowprtInLs2CnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.4.2.1.1 | ColumnprtInLs2CnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg |
| 1.3.6.1.4.1.164.3.2.3.2.4.2.1.2 | ColumnprtInLs2SltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid. |
| 1.3.6.1.4.1.164.3.2.3.2.4.2.1.3 | ColumnprtInLs2PrtIdx | read-only | current | This attribute indicates a unique internal port index. |
| 1.3.6.1.4.1.164.3.2.3.2.4.2.1.4 | ColumnprtInLs2Connect | read-write | current | This attribute indicates whether the port should be considered in any of the mux algorithms. It also affects all the module considerations because the module h… |
| 1.3.6.1.4.1.164.3.2.3.2.4.2.1.5 | ColumnprtInLs2Group | read-write | current | This attribute indicates the group number of the port. LS-2 internal ports with the same group number share the same Time slot of the main link |
| 1.3.6.1.4.1.164.3.2.3.2.4.2.1.6 | ColumnprtInLs2Member | read-write | current | This attribute indicates the group member id of the port. This parameter is for the automatic envelope assignment algorithm. |
| 1.3.6.1.4.1.164.3.2.3.2.4.2.1.7 | ColumnprtInLs2LinkTo | read-write | deprecated | It indicates the slot of the main link card to which the LS2 card is mapped. STATUS deprecated - this object is replaced by prtGenCnfgLinkToSlot and prtGenCnfg… |
| 1.3.6.1.4.1.164.3.2.3.2.4.2.1.8 | ColumnprtInLs2EnvAssign | read-write | current | Envelope assignment type. |
| 1.3.6.1.4.1.164.3.2.3.2.5 | TableprtVc2CnfgTable | not-accessible | current | - For products supporting more than one configuration, the write operation into the Table is valid only to the TmpCnfg entry. - For products that do not suppor… |
| 1.3.6.1.4.1.164.3.2.3.2.5.1 | RowprtVc2CnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.1 | ColumnprtVc2CnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.2 | ColumnprtVc2SltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. For Stand Alone products like WR: notApplicable (255) |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.3 | ColumnprtVc2PrtIdx | read-only | current | A unique identifier of the port, within the card. For MP-2100/2200 card ports, Web Ranger and FCD-IP Voice ports the values will be: exPrt1 (1) exPrt2 (2) exPr… |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.4 | ColumnprtExVc2Connect | read-write | current | This attribute indicates whether the port should be considered in any of the mux algorithms. |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.5 | ColumnprtExVc2TransGain | read-write | current | Transmit gain in dBm. For ports of MP-104/204, MP-2100/2200 VC-6A, VC-6AG, VC-8 VC-4/Omni and VC-16 cards, the units will be 0.1dBm because valid values can be… |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.6 | ColumnprtExVc2ReceiveGain | read-write | current | Receive gain in dBm. For ports of MP-104/204, MP-2100/2200 VC-6A, VC-6AG, VC-8 VC-4/Omni and VC-16 cards, the units will be 0.1dBm because valid values can be … |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.7 | ColumnprtExVc2Wire | read-write | current | For some cards, this object is equal for all the ports in the specific card because of HW limitations. For FXO & FXS this parameter is not applicable. |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.8 | ColumnprtExVc2CodingLaw | read-write | current | This attribute indicates the Method/Law for decoding/encoding the voice information. aLaw(1) is the standard Law for E1 links. uLaw(2) is the standard Law for … |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.9 | ColumnprtExVc2Sig | read-write | current | This attribute indicates the method for decoding/encoding the signaling information(on/off hook). noSignaling (1) - not using signaling (only voice). robbedBit… |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.10 | ColumnprtExVc2Oos | read-write | current | This object is equal for all the ports in the specific card because of HW limitations |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.11 | ColumnprtExVc2LinkTo | read-write | deprecated | This attribute indicates the slot of the ML card to which the VC card is mapped. STATUS deprecated - this object is replaced by prtGenCnfgLinkToSlot and prtGen… |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.12 | ColumnprtExVc2OperMode | read-write | current | This object indicates the operation mode of the port. normal = bi-directional (Tx/Rx) unidirectRx = unidirectional Rx. broadcast = Tx upon request. |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.13 | ColumnprtExVc2SigProfile | read-write | current | This object indicates the Signaling Profile of the port. notApplicable - for VC-2 family and when prtExVc2Sig=noSignaling(1) p1 = profile 1 p2 = profile 2 p3 =… |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.14 | ColumnprtExVc2CallEnable | read-write | current | This object indicates the Enabled Call direction. notApplicable - for all cards except VC-2/R2. both - incoming + outgoing. |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.15 | ColumnprtExVc2R2Delay | read-write | current | This object indicates the R2 Delay. notApplicable - for all cards except VC-2/R2. |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.16 | ColumnprtExVc2CasStd | read-write | current | This object indicates the CAS (Channel Associated Signaling) Standard. notApplicable - for all cards except VC-2/R2. |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.17 | ColumnprtExVc2EchoCanceler | read-write | current | Echo canceler activation. notApplicable - for VC-2 and VC-6 cards. |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.18 | ColumnprtExVc2IfType | read-write | current | Interface Type. |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.19 | ColumnprtExVc2Encoding | read-write | current | Voice Encoding Mode. linear - is relevant only for the ports of VC-16A card. |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.20 | ColumnprtExVc2TxBitCode | read-write | current | - - - For MP & FCD - - - This object represents 4 parameters, by 2 Octets : Tx D Bit Code-MSB nibble, Tx C Bit Code- nibble, Tx B Bit Code- nibble, Tx A Bit Co… |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.21 | ColumnprtExVc2RxBitOutput | read-write | current | - - - For MP (VC-Q card only) & FCD - - - This object represents 3 parameters by 2 Octets: Spare -MSB nibble, always=0 hex E Lead Output - nibble, Reverse Pola… |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.22 | ColumnprtExVc2MeterRate | read-write | current | This entry is applicable only for VC-6A/FXO, VC-6A/FXS, VC-8/FXO, VC-8/FXS, VC-16/FXO and VC-16/FXS. Meter Rate means rate of Call Meter in Public Phones, in K… |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.23 | ColumnprtExVc2IfSignaling | read-write | current | This entry is applicable only for VC-6A, VC-6AG, VC-8/FXO, VC-8/FXS, VC-16/FXO and VC-16/FXS cards. Interface Analog Signaling. Must be the same for all card's… |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.24 | ColumnprtExVc2SeizeAck | read-write | current | This parameter shows whether the device will acknowledge a seize signal (On/Off Hook). When the value is set to yes(3) & the device receives an on/off hook sig… |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.25 | ColumnprtExVc2EandMType | read-write | current | This is the signaling type on the E&M analog side. The analog signaling includes voltage, no. of pins and other parameters. |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.26 | ColumnprtExVc2RemType | read-write | current | Remote Type. Applicable for VC-6A/4LB card & for IPMUX-1E Far End Type - E1,T1(T1-ESF) or T1-D4 . |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.27 | ColumnprtExVc2ConvTime | read-write | current | Conversation Time in minutes. Applicable for VC-6A/4LB card. |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.28 | ColumnprtExVc2SigFeedback | read-write | current | Signaling Feedback. Applicable for VC-8/FXO and VC-16/FXO cards. |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.29 | ColumnprtExVc2EchoCancelerModule | read-only | current | This parameter indicates whether Echo canceler module exists for this port. |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.30 | ColumnprtExVc2ReversePolarity | read-write | current | This object Enables/Disables Reverse Polarity for this port. |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.31 | ColumnprtExVc2RingerFrequency | read-write | current | This object selects the Ringer Frequency (Hz) for this port. |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.32 | ColumnprtExVc2SigService | read-write | current | Signaling Service. advanced - is relevant only for ports of VC-8, VC-16 FXS cards. It is used for Signaling Services of V5.1 or R2. |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.33 | ColumnprtExVc2CallerIdEnable | read-write | current | This object Enables/Disables Receiving the Caller Id number from the remote side, for this port/channel. |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.34 | ColumnprtExVc2CompressMethod | read-write | current | This object is applicable only when prtExVc2Encoding=adpcm. It defines which method is used for Compression. g726 - for 4 bits (the standard method). g726 - fo… |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.35 | ColumnprtExVc2ObMode | read-write | current | This object defines the Net operation mode of the Omni-Bus card's port. pointToPoint - only 2 end-point ports talk; like any other voice card omniBus - many ta… |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.36 | ColumnprtExVc2VAD | read-write | current | This object defines whether Voice Activation Detector (VAD) will be On or Off. off - will be usually selected when a Modem is connected to the port; not a phon… |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.37 | ColumnprtExVc2NoiseLevelForVAD | read-write | current | This object defines the Level of Noise on the line, the Voice Activation Detector (VAD) will have to deal with. notApplicable - when prtExVc2VAD=off. |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.38 | ColumnprtExVc2WesternSigMode | read-write | current | This object defines the Western Signaling Mode. detector - detects signal and passes it as is. generator - generates the signal. notApplicable - when Western H… |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.39 | ColumnprtExVc2BusProtectionPoint | read-write | current | This object defines if the port is Bus Protection Point or not. notApplicable - when prtExVc2DspMode=pointToPoint. When we have a chain of devices where the ed… |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.40 | ColumnprtExVc2ImpedanceStandard | read-write | current | This object defines the Standard used for Impedance. -G.712 - 600 Ohm - used in USA and other countries. -Q552/ETSI - used in some countries in Europe -Q522/It… |
| 1.3.6.1.4.1.164.3.2.3.2.6 | TableprtHsfCnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.6.1 | RowprtHsfCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.6.1.1 | ColumnprtHsfCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relate to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.6.1.2 | ColumnprtHsfSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid. |
| 1.3.6.1.4.1.164.3.2.3.2.6.1.3 | ColumnprtHsfPrtIdx | read-only | current | This attribute indicates a unique external port index. Hs2 has only two ports (exPrt1,exPrt2). Hs3 has three ports (exPrt1,exPrt2,exPrt3). Hsq and hsqN has fou… |
| 1.3.6.1.4.1.164.3.2.3.2.6.1.4 | ColumnprtExHsfConnect | read-write | current | This attribute indicates whether the port should be considered in any of the mux algorithms. |
| 1.3.6.1.4.1.164.3.2.3.2.6.1.5 | ColumnprtExHsfRate | read-write | current | This attribute indicates the port speed. |
| 1.3.6.1.4.1.164.3.2.3.2.6.1.6 | ColumnprtExHsfClkMode | read-write | current | This attribute indicates a unique port operation clock mode. |
| 1.3.6.1.4.1.164.3.2.3.2.6.1.7 | ColumnprtExHsfCts | read-write | current | This attribute indicates a unique CTS control line operation mode. |
| 1.3.6.1.4.1.164.3.2.3.2.6.1.8 | ColumnprtExHsfFifoSize | read-write | current | Size in bits. |
| 1.3.6.1.4.1.164.3.2.3.2.6.1.9 | ColumnprtExHsfLinkTo | read-write | deprecated | This attribute indicates a slot of Main Link module, that the port is linked to. This object is the same for all the ports in the specific card because of HW l… |
| 1.3.6.1.4.1.164.3.2.3.2.6.1.10 | ColumnprtExHsfOperMode | read-write | current | This object indicates the operation mode of the port. normal = bi-directional (Tx/Rx) unidirectRx = unidirectional Rx. broadcast = Tx upon request. bidirBcastR… |
| 1.3.6.1.4.1.164.3.2.3.2.6.1.11 | ColumnprtExHsfInbandLoopback | read-write | current | This object indicates if Inband Loopback from the Network should be enabled or disabled. |
| 1.3.6.1.4.1.164.3.2.3.2.6.1.12 | ColumnprtExHsfClkPolarity | read-write | current | This object indicates the clock polarity. For FCD-M this object will be applicable only for the fixed HS port (the fixed port on the device). |
| 1.3.6.1.4.1.164.3.2.3.2.6.1.13 | ColumnprtExHsfControlSignal | read-write | current | This object indicates the Control Signal according to G.797 ITU-T standard. For FCD-M this object will be applicable for the fixed HS port (the fixed port on t… |
| 1.3.6.1.4.1.164.3.2.3.2.6.1.14 | ColumnprtExHsfBcastRingSrcPort | read-write | current | This object is applicable only when prtExHsfOperMode= bidirBcastRing. In this case, the values mean: - none - this port will be connected to ML in TSA as usual… |
| 1.3.6.1.4.1.164.3.2.3.2.7 | NodeprtHs4Cnfg | |||
| 1.3.6.1.4.1.164.3.2.3.2.7.1 | TableprtExHs4CnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.7.1.1 | RowprtExHs4CnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.7.1.1.1 | ColumnprtExHs4CnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg |
| 1.3.6.1.4.1.164.3.2.3.2.7.1.1.2 | ColumnprtExHs4SltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. |
| 1.3.6.1.4.1.164.3.2.3.2.7.1.1.3 | ColumnprtExHs4PrtIdx | read-only | current | A unique identifier of the port, within the card. |
| 1.3.6.1.4.1.164.3.2.3.2.7.1.1.4 | ColumnprtExHs4Connect | read-write | current | This attribute indicates whether the port should be considered in any of the mux algorithm. It also affects all the module considerations because the card has … |
| 1.3.6.1.4.1.164.3.2.3.2.7.1.1.5 | ColumnprtExHs4LineType | read-write | current | This attribute is the line type parameter for T1/E1 interface. The user should select only the parameters relevant to the specific card: T1 line code parameter… |
| 1.3.6.1.4.1.164.3.2.3.2.7.1.1.6 | ColumnprtExHs4LineCode | read-write | current | This attribute is the line code parameter used for T1/E1 interface. The user should select only the parameters relevant to the specific card: T1 line code para… |
| 1.3.6.1.4.1.164.3.2.3.2.7.1.1.7 | ColumnprtExHs4LineLen | read-write | current | This attribute is the line length parameter used only for T1 interfaces. len399p533ft=len-399-533ft |
| 1.3.6.1.4.1.164.3.2.3.2.7.1.1.8 | ColumnprtExHs4RestoreT | read-write | current | Time passing from the disappearance of the loss of synchronization condition (red alarm), to the restoration of normal service. |
| 1.3.6.1.4.1.164.3.2.3.2.7.1.1.9 | ColumnprtExHs4OosSig | read-write | current | Out of Service signal type. |
| 1.3.6.1.4.1.164.3.2.3.2.7.1.1.10 | ColumnprtExHs4OosCode | read-write | current | OOS Code |
| 1.3.6.1.4.1.164.3.2.3.2.7.1.1.11 | ColumnprtExHs4IdleCode | read-write | current | Type value(00 - FF HEX), excluding 0H,8H,10H,12H,21H,24H, 42H,49H,84H,92H |
| 1.3.6.1.4.1.164.3.2.3.2.7.1.1.12 | ColumnprtExHs4MfClkSrcSlt | read-write | current | This attribute indicates whether the port Tx is multiframe synchronized with Rx multiframe of another port and the slot position of that port. This opration is… |
| 1.3.6.1.4.1.164.3.2.3.2.7.1.1.13 | ColumnprtExHs4MfClkSrcPrt | read-write | current | A unique number to identify a port position in the mux if the MultiFrame clock source is valid (YES). inPrt1 - for MTML-H/E1 cards. |
| 1.3.6.1.4.1.164.3.2.3.2.7.2 | TableprtExHs4TsCnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.7.2.1 | RowprtExHs4TsEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.7.2.1.1 | ColumnprtExHs4TsCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.7.2.1.2 | ColumnprtExHs4TsSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid |
| 1.3.6.1.4.1.164.3.2.3.2.7.2.1.3 | ColumnprtExHs4TsPrtIdx | read-only | current | This attribute indicates a unique port number. Hs4/T1 and Hs4/T1 cards have only one external interface. |
| 1.3.6.1.4.1.164.3.2.3.2.7.2.1.4 | ColumnprtExHs4TsIdx | read-only | current | This attribute indicates a unique time slot position. The valid time slots are: 1..24 for T1 Card and 1..31 for E1 interface. In G732S-E1 lines, time slot 16 i… |
| 1.3.6.1.4.1.164.3.2.3.2.7.2.1.5 | ColumnprtExHs4TsIConSlot | read-write | current | This attribute indicates whether the specified time slot is connected/routed internally in the Agent and to which card it is connected. In the ?004 Unit the en… |
| 1.3.6.1.4.1.164.3.2.3.2.7.2.1.6 | ColumnprtExHs4TsIConPrt | read-write | current | This attribute indicates the internally (In Mux) connected/routed port. |
| 1.3.6.1.4.1.164.3.2.3.2.7.2.1.7 | ColumnprtExHs4TsIConTs | read-write | current | This attribute indicates a unique time slot position. The valid time slots are: 1..24 for T1 Module and 1..31 for E1 interface. In G732S-E1 lines time slot 16 … |
| 1.3.6.1.4.1.164.3.2.3.2.8 | NodeprtHsiCnfg | |||
| 1.3.6.1.4.1.164.3.2.3.2.8.1 | TableprtExHsiCnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.8.1.1 | RowprtExHsiCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.8.1.1.1 | ColumnprtExHsiCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg |
| 1.3.6.1.4.1.164.3.2.3.2.8.1.1.2 | ColumnprtExHsiSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. |
| 1.3.6.1.4.1.164.3.2.3.2.8.1.1.3 | ColumnprtExHsiPrtIdx | read-only | current | A unique port identifier within the card. For MP : 1..12 For DXC: 111 .. 2531. See DXC R6 spec for port index convention. For FCD-A, 'S' Interface external por… |
| 1.3.6.1.4.1.164.3.2.3.2.8.1.1.4 | ColumnprtExHsiConnect | read-write | current | This attribute indicates whether the port should be considered in any of the mux algorithms. v51 - this port is connected to a V5.1 interface. All rest of the … |
| 1.3.6.1.4.1.164.3.2.3.2.8.1.1.5 | ColumnprtExHsiRate | read-write | current | This attribute indicates the port speed. |
| 1.3.6.1.4.1.164.3.2.3.2.8.1.1.6 | ColumnprtExHsiLinkTo | read-write | deprecated | It indicates the slot of the main link card to which the HS-? card is mapped. STATUS deprecated - this object is replaced by prtGenCnfgLinkToSlot and prtGenCnf… |
| 1.3.6.1.4.1.164.3.2.3.2.8.1.1.7 | ColumnprtExHsiInterface | read-write | current | It indicates the interface type: lt = line termination nt = network termination te = terminal equipment. lt1 - for ASMi-31 connection (not ISDN) For MP: For HS… |
| 1.3.6.1.4.1.164.3.2.3.2.8.1.1.8 | ColumnprtExHsiActType | read-write | current | It indicates the Activation Type. Activation Type is the Synchronization type towards the PBX. It is applicable only when prtExHsiInterface=nt. notApplicable -… |
| 1.3.6.1.4.1.164.3.2.3.2.8.2 | TableprtInHsiCnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. This table is not applicable for MP-2100 HS-U card type. |
| 1.3.6.1.4.1.164.3.2.3.2.8.2.1 | RowprtInHsiCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.8.2.1.1 | ColumnprtInHsiCnfgIdx | read-only | current | This object indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg |
| 1.3.6.1.4.1.164.3.2.3.2.8.2.1.2 | ColumnprtInHsiSltIdx | read-only | current | This object indicates a unique slot position where the card is inserted. |
| 1.3.6.1.4.1.164.3.2.3.2.8.2.1.3 | ColumnprtInHsiPrtIdx | read-only | current | A unique port identifier within the card. Valid values for MP: inPrt1 (101) .. inPrt48 (148). Valid values for DXC: 11012.. 25316. See DXC R6 spec for port ind… |
| 1.3.6.1.4.1.164.3.2.3.2.8.2.1.4 | ColumnprtInHsiConnect | read-write | current | This attribute indicates whether the port should be considered in any of the mux algorithms. |
| 1.3.6.1.4.1.164.3.2.3.2.8.2.1.5 | ColumnprtInHsiRate | read-write | current | This object indicates the port speed. For HS-U/I and HS-S ports: 2 bit - up to 9600bps 4 bit - 19200bps 8 bit - 38400bps .. 64kbps. concentrated - this D chann… |
| 1.3.6.1.4.1.164.3.2.3.2.8.2.1.6 | ColumnprtInHsiConcentratedTo | read-write | current | The Concentration D Channel of the prtInHsiPrtIdx port. The port always belongs to the same card as prtInHsiPrtIdx port. This object is applicable only when pr… |
| 1.3.6.1.4.1.164.3.2.3.2.9 | NodeprtPVc4Cnfg | |||
| 1.3.6.1.4.1.164.3.2.3.2.9.1 | TableprtExPVc4CnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1 | RowprtExPVc4CnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.1 | ColumnprtExPVc4CnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.2 | ColumnprtExPVc4SltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.3 | ColumnprtExPVc4PrtIdx | read-only | current | This object indicates the port number in the selected card (slot). |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.4 | ColumnprtExPVc4PrtType | read-write | current | This object indicates the type of the selected port. In Mx 30/300 phase 4: s0 & u are for Voice over ISDN. In MX 30/300 phase 5: sQsig & uQsig are used for Voi… |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.5 | ColumnprtExPVc4Connect | read-write | current | This attribute indicates whether the port should be considered in any of the mux algorithms. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.6 | ColumnprtExPVc4IfType | read-write | current | This attribute indicates the interface type of the port. eAndM4wires and eAndM2wires - are valid only for E&M port type eAndM4wires - means 2/4 wires fxoGnd an… |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.7 | ColumnprtExPVc4TxGain | read-write | current | Transmission gain in dB. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.8 | ColumnprtExPVc4RxGain | read-write | current | Reception gain in dBm. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.9 | ColumnprtExPVc4MaxRate | read-write | current | Voice rate. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.10 | ColumnprtExPVc4Tc | read-write | current | Time interval for CIR control, in seconds. The value will be the same for all cards' ports. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.11 | ColumnprtExPVc4Oos | read-write | current | Handling type, when connection is lost. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.12 | ColumnprtExPVc4EchoCanceler | read-write | current | Echo canceler activation. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.13 | ColumnprtExPVc4VarDelay | read-write | current | Maximum variant delay of the FR network, in msec. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.14 | ColumnprtExPVc4CongLevel | read-write | current | This object indicates the level of delayed data in precents of total available dynamic memory, for which the port will start to operate as congested. The resol… |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.15 | ColumnprtExPVc4Wire | read-write | current | This object indicates the wiring of the E&M port. It is applicable only for E&M card type. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.16 | ColumnprtExPVc4ExtensionType | read-write | current | This object indicates the type of extension relevant for this port. ipForceConnect (6) is used for automatic connection or automatic dialing when the phone is … |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.17 | ColumnprtExPVc4ExtensionNumber | read-write | current | This is the extension number of this port. This field is relevant only when the extension type is voice switching and is read only if the port is member of a h… |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.18 | ColumnprtExPVc4OutPulsing | read-write | current | This field indicates whether to outpulse the received digits. It is notApplicable(1) when the extension type is forceConnect(2). |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.19 | ColumnprtExPVc4HuntGroupMb | read-write | current | This object indicates if this port belongs to an hunt group. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.20 | ColumnprtExPVc4HuntGroupIdx | read-write | current | If it belongs to an hunt group, this fields indicates the index of the relevant hunt group. 0 = notApplicable |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.21 | ColumnprtExPVc4AutoFaxMode | read-write | current | This object indicates if the system will switch automatically to FAX mode when detecting FAX activity. Default=Yes. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.22 | ColumnprtExPVc4FaxRate | read-write | current | FAX initial rate. Default=9600 bps. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.23 | ColumnprtExPVc4SeizeAck | read-write | current | This parameter shows whether the device will acknowledge a seize signal (On/Off Hook). When the value is set to yes(3) & the device receives an on/off hook sig… |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.24 | ColumnprtExPVc4SignalingProtocol | read-write | current | The signaling protocol that will be used between the PABX & the voice port. Delay Start Protocol: the line is seized by sending an Off hook signal and after a … |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.25 | ColumnprtExPVc4DelayStart | read-write | current | This parameter is used only for Delay Protocol. This is the time that the calling party will wait after sending an Off hook signal and before sending DTMF digi… |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.26 | ColumnprtExPVc4WinkMinDuration | read-write | current | This parameter is used only for Wink Protocol. Min Duration of the Wink Signal (off hook duration from the called party). Legal values: 40..400 msec in interva… |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.27 | ColumnprtExPVc4WinkMaxDuration | read-write | current | This parameter is used only for Wink Protocol. Max Duration of the Wink Signal (off hook duration from the called party). Legal values: 40..400 msec in interva… |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.28 | ColumnprtExPVc4GenerateTone | read-write | current | This parameter indicates whether the device (MX or MPH) should generate dial tones for the channel. If the value is yes (3), it generates dial tones. If the va… |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.29 | ColumnprtExPVc4CodingLaw | read-write | current | This attribute indicates the Method/Law for decoding/encoding the voice information. aLaw(1) is the standard Law for E1 links. uLaw(2) is the standard Law for … |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.30 | ColumnprtExPVc4GenerateRingBack | read-write | current | Determines whether the Ring Back tone is generated locally or from the remote end. The default is - NO (Meaning coming from the remote end). Yes means that the… |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.31 | ColumnprtExPVc4ChannelId | read-write | current | Channel Identifier. According to FRF11 each voice port that works as force connect should add a CH Id after the DLCI in the frame header. Default : 1 Applicabl… |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.32 | ColumnprtExPVc4PortConnection | read-write | current | Port connection determines whether the port is connected to a PABX (Trunk) or to Telephone set (Line) . It determines whether to send certain messages to the p… |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.33 | ColumnprtExPVc4CoderAndRate | read-write | current | Coder and Rate for the Voice Compression. In MPH: Relevant for MVC-8 card only. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.34 | ColumnprtExPVc4DestinationNum | read-write | current | The destination phone number: 0 to 22 digits. Applicable for Auto Dial - ipForceConnect(6), Permanent Dial and Auto Accept Extension Types. Default: Null String |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.35 | ColumnprtExPVc4DtmfRelay | read-write | current | When DTMF RELAY is disabled, the DTMF digits (dialed by the user) are transmitted as compressed voice and in the remote unit are decompressed. When DTMF RELAY … |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.36 | ColumnprtExPVc4DiscOnSilence | read-write | current | No. of silenced seconds after which the call will be disconected. A value of 0 means that there will be no disconnect when there is silence. Possible values: 0… |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.37 | ColumnprtExPVc4DynamicJitter | read-write | current | The MVC8 uses two mechanisms to overcome the network delay. The first one is a static jitter buffer which holds a constant buffer of up to 300 Msec and can be … |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.38 | ColumnprtExPVc4EandMType | read-write | current | This is the signaling type on the E&M analog side. The analog signaling includes voltage, no. of pins and other parameters. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.39 | ColumnprtExPVc4Rate | read-write | current | This is the Rate of the port in TS units. It is used by VF-30 card family. 0 = NA = port is not intended to be connected; therefore, no Rate. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.40 | ColumnprtExPVc4FrameSize | read-write | current | Defines the maximum size in Bytes of the multiplexed frame. In some cases this must be limited to avoid IP fragmentation, which makes the multiplexing useless,… |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.41 | ColumnprtExPVc4MultiplexInterval | read-write | current | Defines the maximum amout of time (msec.) between multiplexed frames that are sent. For Vmux-400/420 devices: It defines the Payload Packetizing Interval. Vali… |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.42 | ColumnprtExPVc4TransportProtocol | read-write | current | Transport Protocol. ptp = point to point. aal2oMpls = AAL2 over MPLS. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.43 | ColumnprtExPVc4MultiFreqRelay | read-write | current | This object enables/disables Multi Frequency Signaling Detection. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.44 | ColumnprtExPVc4MinPulseWidth | read-write | current | Defines the minimum Pulse Width in msec. Valid values: 45-100 msec. notApplicable=0. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.45 | ColumnprtExPVc4MinPowerLevel | read-write | current | Defines the minimum Power Level in dBm. Valid values: -1..-35 dBm. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.46 | ColumnprtExPVc4SuperTandem | read-write | current | The Super Tandem feature provides end to end compression over multiple hops, solving the double compression problem detected in Voice compressing systems. The … |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.47 | ColumnprtExPVc4DestIp | read-write | current | This object defines the destination IP Address. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.48 | ColumnprtExPVc4DestBundle | read-write | current | This object defines the destination Bundle at the far-end device. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.49 | ColumnprtExPVc4SrcIpAddress | read-write | current | This object defines the Source IP Address. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.50 | ColumnprtExPVc4SrcIpMask | read-write | current | This object defines the Source IP Mask. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.51 | ColumnprtExPVc4DefaultGateway | read-write | current | This object defines the Default Gateway for this interface. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.52 | ColumnprtExPVc4SigPacketInterval | read-write | current | Defines the Signaling Packetizing Interval, which is the maximum time interval, measured in msec (milliseconds), between multiplexed signaling frames. |
| 1.3.6.1.4.1.164.3.2.3.2.9.2 | TableprtExPVc4DlciTable | not-accessible | current | The write operation into the Table Objects is valid only at the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.9.2.1 | RowprtExPVc4DlciEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.9.2.1.1 | ColumnprtExPVc4DlciCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.9.2.1.2 | ColumnprtExPVc4DlciSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid |
| 1.3.6.1.4.1.164.3.2.3.2.9.2.1.3 | ColumnprtExPVc4DlciPrtIdx | read-only | current | This attribute indicates a unique internal port number. VC4 cards have four external ports. |
| 1.3.6.1.4.1.164.3.2.3.2.9.2.1.4 | ColumnprtExPVc4DlciValid | read-write | current | This attribute indicates whether the attributes in this entry are valid or not. The user can add/delete pvc (dlci to dlci connection) by modifing this object |
| 1.3.6.1.4.1.164.3.2.3.2.9.2.1.5 | ColumnprtExPVc4DlciIConSlt | read-write | current | This attribute indicates a unique slot position In the Mux (Agent) where the dlci is routed to. In the ?004 Unit the entries io6(10)..io16) are not valid |
| 1.3.6.1.4.1.164.3.2.3.2.9.2.1.6 | ColumnprtExPVc4DlciIConPrt | read-write | current | This attribute indicates a unique port id which the dlci is routed to. |
| 1.3.6.1.4.1.164.3.2.3.2.9.2.1.7 | ColumnprtExPVc4DlciIConDlci | read-write | current | This attribute indicates a unique internal connection dlci number, the dlci is routed to. |
| 1.3.6.1.4.1.164.3.2.3.2.9.2.1.8 | ColumnprtExPVc4DlciTxBc | read-write | current | This attribute indicates a unique Tx committed bandwidth on the user transmit line (or at the port receive line). |
| 1.3.6.1.4.1.164.3.2.3.2.9.2.1.9 | ColumnprtExPVc4DlciTxBe | read-write | current | This attribute indicates a unique Tx excess bandwidth on the user transmit line (or at the port receive line). |
| 1.3.6.1.4.1.164.3.2.3.2.9.2.1.10 | ColumnprtExPVc4DlciRxBc | read-write | current | This attribute indicates a unique Rx committed bandwidth on the user receive line (or at the port transmit line). |
| 1.3.6.1.4.1.164.3.2.3.2.9.2.1.11 | ColumnprtExPVc4DlciRxBe | read-write | current | This attribute indicates a unique Rx excess bandwidth on the user receive line (or at the port transmit line). |
| 1.3.6.1.4.1.164.3.2.3.2.9.2.1.12 | ColumnprtExPVc4DlciPriority | read-write | current | This attribute indicates a unique priority of the pvc. 6 is the lowest priority and 8 is the highest priority. |
| 1.3.6.1.4.1.164.3.2.3.2.9.2.1.13 | ColumnprtExPVc4DlciStatus | read-only | current | This attribute indicates the status of the pvc. The status is disconnected(1) when one of the sides is programmed as not connected |
| 1.3.6.1.4.1.164.3.2.3.2.10 | NodeprtHsrCnfg | |||
| 1.3.6.1.4.1.164.3.2.3.2.10.1 | TableprtExHsrCnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.10.1.1 | RowprtExHsrCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.10.1.1.1 | ColumnprtExHsrCnfgIdx | read-only | current | This object indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg |
| 1.3.6.1.4.1.164.3.2.3.2.10.1.1.2 | ColumnprtExHsrSltIdx | read-only | current | This object indicates a unique slot position where the card is inserted. |
| 1.3.6.1.4.1.164.3.2.3.2.10.1.1.3 | ColumnprtExHsrPrtIdx | read-only | current | A unique prt identifier within the card. Valid values: For MP: - For HS-R cards: exPrt1 (1) .. exPrt4 (4) - For HS-U/1 cards: inPrt1 (101) .. inPrt4 (104) - Fo… |
| 1.3.6.1.4.1.164.3.2.3.2.10.1.1.4 | ColumnprtExHsrConnect | read-write | current | This object indicates whether the port should be considered in any of the mux algorithms. |
| 1.3.6.1.4.1.164.3.2.3.2.10.1.1.5 | ColumnprtExHsrProtocol | read-write | current | This object indicates the protocol. |
| 1.3.6.1.4.1.164.3.2.3.2.10.1.1.6 | ColumnprtExHsrRate | read-write | current | This object indicates the port speed. The 16,32,48,56,64 and 128 kbps rates are applicable only for Sync protocol. The 57.6 and 115.2 kbps rates are applicable… |
| 1.3.6.1.4.1.164.3.2.3.2.10.1.1.7 | ColumnprtExHsrDataBits | read-write | current | Data Bits. This object is applicable for Async protocol only. |
| 1.3.6.1.4.1.164.3.2.3.2.10.1.1.8 | ColumnprtExHsrParity | read-write | current | - For HS-R card, this object indicates if the parity bit is needed or not. Therefore, the 'no' and 'yes; values are applicable. - For HS-S12, HS-U12, the parit… |
| 1.3.6.1.4.1.164.3.2.3.2.10.1.1.9 | ColumnprtExHsrStopBits | read-write | current | This object indicates the minimum number of stop bits in the tx async frame. This object is applicable for Async protocol only. |
| 1.3.6.1.4.1.164.3.2.3.2.10.1.1.10 | ColumnprtExHsrCts | read-write | current | CTS. This object is applicable for Async protocol only. |
| 1.3.6.1.4.1.164.3.2.3.2.10.1.1.11 | ColumnprtExHsrClkMode | read-write | current | Clock mode. This object is applicable for Sync protocol only. |
| 1.3.6.1.4.1.164.3.2.3.2.10.1.1.12 | ColumnprtExHsrLinkTo | read-write | deprecated | It indicates the slot of the main link card to which the HS-R card is mapped. notApplicable - for HS-U/1 internal ports. STATUS deprecated - this object is rep… |
| 1.3.6.1.4.1.164.3.2.3.2.10.1.1.13 | ColumnprtExHsrDcdDsr | read-write | current | DCD & DSR. |
| 1.3.6.1.4.1.164.3.2.3.2.10.1.1.14 | ColumnprtExHsrOperMode | read-write | current | This object indicates the operation mode of the port. normal = bi-directional (Tx/Rx) unidirectRx = unidirectional Rx. broadcast = Tx upon request. |
| 1.3.6.1.4.1.164.3.2.3.2.10.1.1.15 | ColumnprtExHsrRtsDtr | read-write | current | RTS & DTR. |
| 1.3.6.1.4.1.164.3.2.3.2.10.1.1.16 | ColumnprtExHsrLlbEnable | read-write | current | Enable/Disable LLB. |
| 1.3.6.1.4.1.164.3.2.3.2.10.1.1.17 | ColumnprtExHsrRlbEnable | read-write | current | Enable/Disable RLB. |
| 1.3.6.1.4.1.164.3.2.3.2.10.1.1.18 | ColumnprtExHsrRateAdapt | read-write | current | Rate Adaptation - takes a low rate and adapts it to 64Kbps. This object specifies the means this adaptation is done by. |
| 1.3.6.1.4.1.164.3.2.3.2.10.1.1.19 | ColumnprtExHsrRemoteModem | read-write | current | Remote modem. asmi31s2 = ASMi-31/2 |
| 1.3.6.1.4.1.164.3.2.3.2.10.1.1.20 | ColumnprtExHsrEncapsMode | read-write | current | Low Speed encapsulation method over PCM. When Encapsulation mode is Latency optimized, only rates up to 19.2 are supported. In this case a double number of bit… |
| 1.3.6.1.4.1.164.3.2.3.2.11 | NodeprtMbeCnfg | |||
| 1.3.6.1.4.1.164.3.2.3.2.11.1 | TableprtExMbeCnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.11.1.1 | RowprtExMbeCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.11.1.1.1 | ColumnprtExMbeCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg |
| 1.3.6.1.4.1.164.3.2.3.2.11.1.1.2 | ColumnprtExMbeSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid. |
| 1.3.6.1.4.1.164.3.2.3.2.11.1.1.3 | ColumnprtExMbePrtIdx | read-only | current | A unique port identifier within the card. |
| 1.3.6.1.4.1.164.3.2.3.2.11.1.1.4 | ColumnprtExMbeLan | read-write | current | This attribute indicates whether the MBE port is operated as main or remote bridge. |
| 1.3.6.1.4.1.164.3.2.3.2.11.2 | TableprtInMbeCnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.11.2.1 | RowprtInMbeCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.11.2.1.1 | ColumnprtInMbeCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg |
| 1.3.6.1.4.1.164.3.2.3.2.11.2.1.2 | ColumnprtInMbeSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid. |
| 1.3.6.1.4.1.164.3.2.3.2.11.2.1.3 | ColumnprtInMbePrtIdx | read-only | current | A unique port identifier within the card. |
| 1.3.6.1.4.1.164.3.2.3.2.11.2.1.4 | ColumnprtInMbeConnect | read-write | current | This attribute indicates whether the port should be considered in any of the mux algorithms. |
| 1.3.6.1.4.1.164.3.2.3.2.11.2.1.5 | ColumnprtInMbeRate | read-write | current | This attribute indicates the port speed. |
| 1.3.6.1.4.1.164.3.2.3.2.11.2.1.6 | ColumnprtInMbeLinkTo | read-write | deprecated | It indicates the slot of the main link card to which the MBE card is mapped. In the ?004 Unit the entries io6(10)..io16) are not valid. STATUS deprecated - thi… |
| 1.3.6.1.4.1.164.3.2.3.2.12 | NodeprtTreCnfg | |||
| 1.3.6.1.4.1.164.3.2.3.2.12.1 | TableprtExTreCnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.12.1.1 | RowprtExTreCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.12.1.1.1 | ColumnprtExTreCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg |
| 1.3.6.1.4.1.164.3.2.3.2.12.1.1.2 | ColumnprtExTreSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid. |
| 1.3.6.1.4.1.164.3.2.3.2.12.1.1.3 | ColumnprtExTrePrtIdx | read-only | current | A unique port identifier within the card. |
| 1.3.6.1.4.1.164.3.2.3.2.12.1.1.4 | ColumnprtExTreLan | read-write | current | This attribute indicates whether the TRE port is operated as main or remote bridge. Default=remote. |
| 1.3.6.1.4.1.164.3.2.3.2.12.1.1.5 | ColumnprtExTreLanRate | read-write | current | This attribute indicates the Rate of the TRE port in Mbit/sec. Default-r4M. |
| 1.3.6.1.4.1.164.3.2.3.2.12.2 | TableprtInTreCnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.12.2.1 | RowprtInTreCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.12.2.1.1 | ColumnprtInTreCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg |
| 1.3.6.1.4.1.164.3.2.3.2.12.2.1.2 | ColumnprtInTreSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid. |
| 1.3.6.1.4.1.164.3.2.3.2.12.2.1.3 | ColumnprtInTrePrtIdx | read-only | current | A unique port identifier within the card. |
| 1.3.6.1.4.1.164.3.2.3.2.12.2.1.4 | ColumnprtInTreConnect | read-write | current | This attribute indicates whether the port should be considered in any of the mux algorithms. |
| 1.3.6.1.4.1.164.3.2.3.2.12.2.1.5 | ColumnprtInTreRate | read-write | current | This attribute indicates the port speed. |
| 1.3.6.1.4.1.164.3.2.3.2.12.2.1.6 | ColumnprtInTreLinkTo | read-write | deprecated | It indicates the slot of the main link card to which the MBE card is mapped. In the ?004 Unit the entries io6(10)..io16) are not valid. STATUS deprecated - thi… |
| 1.3.6.1.4.1.164.3.2.3.2.13 | NodeprtLs6Cnfg | |||
| 1.3.6.1.4.1.164.3.2.3.2.13.1 | TableprtExLs6CnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.13.1.1 | RowprtExLs6CnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.13.1.1.1 | ColumnprtExLs6CnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg |
| 1.3.6.1.4.1.164.3.2.3.2.13.1.1.2 | ColumnprtExLs6SltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. |
| 1.3.6.1.4.1.164.3.2.3.2.13.1.1.3 | ColumnprtExLs6PrtIdx | read-only | current | This attribute indicates a unique port index. |
| 1.3.6.1.4.1.164.3.2.3.2.13.1.1.4 | ColumnprtExLs6Connect | read-write | current | This attribute indicates whether the port should be considered in any of the mux algorithms. |
| 1.3.6.1.4.1.164.3.2.3.2.13.1.1.5 | ColumnprtExLs6Protocol | read-write | current | This attribute indicates the protocol. async - can be selected only for ports 1-2. |
| 1.3.6.1.4.1.164.3.2.3.2.13.1.1.6 | ColumnprtExLs6Rate | read-write | current | Port rates in bps. g1 - contains the values : (2)-(6),(9),(12),(16) g2 - contains the values : (7),(10),(14),(19) g3 - contains the values : (8),(11),(13),(15)… |
| 1.3.6.1.4.1.164.3.2.3.2.13.1.1.7 | ColumnprtExLs6ClkMode | read-write | current | This attribute indicates a unique port operation clock mode. It is applicable for Sync protocol only . |
| 1.3.6.1.4.1.164.3.2.3.2.13.1.1.8 | ColumnprtExLs6CtrlSignal | read-write | current | Control Signal. |
| 1.3.6.1.4.1.164.3.2.3.2.13.1.1.9 | ColumnprtExLs6DataBits | read-write | current | Data Bits. This object is applicable for Async protocol only. |
| 1.3.6.1.4.1.164.3.2.3.2.13.1.1.10 | ColumnprtExLs6Cts | read-write | current | This object indicates the CTS control line operation mode. |
| 1.3.6.1.4.1.164.3.2.3.2.13.1.1.11 | ColumnprtExLs6LinkToInternal | read-write | current | This object indicates which internal port of the card, the external port is linked to. |
| 1.3.6.1.4.1.164.3.2.3.2.13.2 | TableprtExLs6VCnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.13.2.1 | RowprtExLs6VCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.13.2.1.1 | ColumnprtExLs6VCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg |
| 1.3.6.1.4.1.164.3.2.3.2.13.2.1.2 | ColumnprtExLs6VSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. |
| 1.3.6.1.4.1.164.3.2.3.2.13.2.1.3 | ColumnprtExLs6VPrtIdx | read-only | current | A unique identifier of the port, within the card. |
| 1.3.6.1.4.1.164.3.2.3.2.13.2.1.4 | ColumnprtExLs6VConnect | read-write | current | This attribute indicates whether the port should be considered in any of the mux algorithms. |
| 1.3.6.1.4.1.164.3.2.3.2.13.2.1.5 | ColumnprtExLs6VRate | read-write | current | Rate (bps) used for FAX transmission and Voice coding. |
| 1.3.6.1.4.1.164.3.2.3.2.13.2.1.6 | ColumnprtExLs6VEchoCanceler | read-write | current | Echo canceler activation. |
| 1.3.6.1.4.1.164.3.2.3.2.13.2.1.7 | ColumnprtExLs6VIfType | read-write | current | This attribute indicates the interface type of the port. w4wire - is applicable only for E&M port type. |
| 1.3.6.1.4.1.164.3.2.3.2.13.2.1.8 | ColumnprtExLs6VTxGain | read-write | current | Transmit gain in dBm. E&M - values range: -17 .. 8 FXO - values range: -16 .. 4 FXS - values range: -13 .. 8 |
| 1.3.6.1.4.1.164.3.2.3.2.13.2.1.9 | ColumnprtExLs6VRxGain | read-write | current | Receive gain in dBm. E&M - values range: -17 .. 2 FXO - values range: -17 .. -1 FXS - values range: -17 .. 2 |
| 1.3.6.1.4.1.164.3.2.3.2.13.2.1.10 | ColumnprtExLs6VOos | read-write | current | Out of Service signaling mode. |
| 1.3.6.1.4.1.164.3.2.3.2.13.3 | TableprtInLs6CnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.13.3.1 | RowprtInLs6CnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.13.3.1.1 | ColumnprtInLs6CnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg |
| 1.3.6.1.4.1.164.3.2.3.2.13.3.1.2 | ColumnprtInLs6SltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. |
| 1.3.6.1.4.1.164.3.2.3.2.13.3.1.3 | ColumnprtInLs6PrtIdx | read-only | current | This attribute indicates a unique internal port index. |
| 1.3.6.1.4.1.164.3.2.3.2.13.3.1.4 | ColumnprtInLs6Connect | read-write | current | This attribute indicates whether the port should be considered in any of the mux algorithms. It also affects all the module considerations because the module h… |
| 1.3.6.1.4.1.164.3.2.3.2.13.3.1.5 | ColumnprtInLs6TandemMode | read-write | current | This object indicates the Tandem Mode. tandemSlave - is valid only for an LS-6 card having on the (current slot-1) an LS-6 card with 'tandemMaster' mode. |
| 1.3.6.1.4.1.164.3.2.3.2.13.3.1.6 | ColumnprtInLs6Rate | read-write | current | Main Rate in Kbps. |
| 1.3.6.1.4.1.164.3.2.3.2.13.3.1.7 | ColumnprtInLs6RemoteType | read-write | current | Remote Type. notApplicable - when prtInLs6TandemMode=tandemSlave |
| 1.3.6.1.4.1.164.3.2.3.2.13.3.1.8 | ColumnprtInLs6LinkTo | read-write | deprecated | It indicates the slot of the main link card to which the Ls6 card is mapped. In the ?004 Unit the entries io6(10)..io12(16) are not valid. notApplicable - when… |
| 1.3.6.1.4.1.164.3.2.3.2.14 | NodeprtVc3Cnfg | |||
| 1.3.6.1.4.1.164.3.2.3.2.14.1 | TableprtExVc3CnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.14.1.1 | RowprtExVc3CnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.14.1.1.1 | ColumnprtExVc3CnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg |
| 1.3.6.1.4.1.164.3.2.3.2.14.1.1.2 | ColumnprtExVc3SltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. |
| 1.3.6.1.4.1.164.3.2.3.2.14.1.1.3 | ColumnprtExVc3PrtIdx | read-only | current | A unique identifier of the port, within the card. |
| 1.3.6.1.4.1.164.3.2.3.2.14.1.1.4 | ColumnprtExVc3Connect | read-write | current | This attribute indicates whether the port should be considered in any of the mux algorithms. |
| 1.3.6.1.4.1.164.3.2.3.2.14.1.1.5 | ColumnprtExVc3TransGain | read-write | current | Transmit gain in dBm. |
| 1.3.6.1.4.1.164.3.2.3.2.14.1.1.6 | ColumnprtExVc3ReceiveGain | read-write | current | Receive gain in dBm. |
| 1.3.6.1.4.1.164.3.2.3.2.14.1.1.7 | ColumnprtExVc3Wire | read-write | current | This object is equal for all the ports in the specific card because of HW limitations |
| 1.3.6.1.4.1.164.3.2.3.2.14.1.1.8 | ColumnprtExVc3Rate | read-write | current | Rate in bps. |
| 1.3.6.1.4.1.164.3.2.3.2.14.1.1.9 | ColumnprtExVc3EchoCanceler | read-write | current | Echo canceler activation. The value will be the same for all the card's external ports. |
| 1.3.6.1.4.1.164.3.2.3.2.14.2 | TableprtInVc3CnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.14.2.1 | RowprtInVc3CnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.14.2.1.1 | ColumnprtInVc3CnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg |
| 1.3.6.1.4.1.164.3.2.3.2.14.2.1.2 | ColumnprtInVc3SltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. |
| 1.3.6.1.4.1.164.3.2.3.2.14.2.1.3 | ColumnprtInVc3PrtIdx | read-only | current | A unique identifier of the port, within the card. |
| 1.3.6.1.4.1.164.3.2.3.2.14.2.1.4 | ColumnprtInVc3Connect | read-write | current | This attribute indicates whether the port should be considered in any of the mux algorithms. |
| 1.3.6.1.4.1.164.3.2.3.2.14.2.1.5 | ColumnprtInVc3Rate | read-write | current | Rate in bps. |
| 1.3.6.1.4.1.164.3.2.3.2.14.2.1.6 | ColumnprtInVc3Oos | read-write | current | This object is equal for all the ports in the specific card because of HW limitations |
| 1.3.6.1.4.1.164.3.2.3.2.14.2.1.7 | ColumnprtInVc3LinkTo | read-write | deprecated | This attribute indicates the slot of the ML card to which the VC card is mapped. In the ?004 Unit the entries io6(10)..io12(16) are not valid. STATUS deprecate… |
| 1.3.6.1.4.1.164.3.2.3.2.15 | NodeprtVcPbxCnfg | |||
| 1.3.6.1.4.1.164.3.2.3.2.15.1 | TableprtExVcPbxCnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.15.1.1 | RowprtExVcPbxCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.15.1.1.1 | ColumnprtExVcPbxCnfgIdx | read-only | current | This object indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg |
| 1.3.6.1.4.1.164.3.2.3.2.15.1.1.2 | ColumnprtExVcPbxSltIdx | read-only | current | This object indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. |
| 1.3.6.1.4.1.164.3.2.3.2.15.1.1.3 | ColumnprtExVcPbxPrtIdx | read-only | current | A unique identifier of the port, within the card. |
| 1.3.6.1.4.1.164.3.2.3.2.15.1.1.4 | ColumnprtExVcPbxConnect | read-write | current | This object indicates whether the port should be considered in any of the mux algorithms. |
| 1.3.6.1.4.1.164.3.2.3.2.15.1.1.5 | ColumnprtExVcPbxGroup | read-only | current | The group object links together several VC-PBX cards, concerning compression of the same input T1/E1 link time-slots. When ports of different slots have the sa… |
| 1.3.6.1.4.1.164.3.2.3.2.15.1.1.6 | ColumnprtExVcPbxTransparent | read-write | current | This object indicates whether the Transparent transfer of Time-Slots is required or not. Time-Slots transferred by Transparent, will not be compressed. no - ap… |
| 1.3.6.1.4.1.164.3.2.3.2.15.1.1.7 | ColumnprtExVcPbxTransSignalTs | read-write | current | This object specifies the ML Time-Slot dedicated to the signaling of the PABX Transparent TSs. None = 255. When prtExVcPbxTransparent=no this object's value=No… |
| 1.3.6.1.4.1.164.3.2.3.2.15.1.1.8 | ColumnprtExVcPbxFrame | read-write | current | This object is the frame parameter for T1/E1 interface. The user should select only the parameters which are relevant to the specific card: T1 values for the V… |
| 1.3.6.1.4.1.164.3.2.3.2.15.1.1.9 | ColumnprtExVcPbxRestoreTime | read-write | current | The time passing from the disappearance of the loss of synchronization condition (red alarm) to the restoration of normal service. The options 1secFast(2) and … |
| 1.3.6.1.4.1.164.3.2.3.2.15.1.1.10 | ColumnprtExVcPbxLineCode | read-write | current | This object is the line code parameter used for T1/E1 interface. The user should select only the parameters which are relevant to the specific card: T1 line co… |
| 1.3.6.1.4.1.164.3.2.3.2.15.1.1.11 | ColumnprtExVcPbxLineLength | read-write | current | This object is the line length parameter. It is applicable only for the VC-PBX/T1 card. notApplicable - for the VC-PBX and VC-PBX/E1 card. lenXXXpXXXft = len-X… |
| 1.3.6.1.4.1.164.3.2.3.2.15.1.1.12 | ColumnprtExVcPbxLinkTo | read-write | deprecated | This object indicates the slot of the ML card to which the VC-PBX/T1, VC-PBX/E1 card Transparent TSs are mapped. notApplicable - for VC-PBX card AND for VC-PBX… |
| 1.3.6.1.4.1.164.3.2.3.2.15.1.1.13 | ColumnprtExVcPbxSignalOper | read-write | current | This object indicates the Signaling Operation of the VC-PBX/T1, VC-PBX/E1 external port. notApplicable - for VC-PBX card normal - all 4 signaling bits are tran… |
| 1.3.6.1.4.1.164.3.2.3.2.15.1.1.14 | ColumnprtExVcPbxIdleCode | read-write | current | Determines the code for transmission in empty time slots. notApplicable - for VC-PBX card . |
| 1.3.6.1.4.1.164.3.2.3.2.15.2 | TableprtIn1p6VcPbxCnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.15.2.1 | RowprtIn1p6VcPbxCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.15.2.1.1 | ColumnprtIn1p6VcPbxCnfgIdx | read-only | current | This object indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg |
| 1.3.6.1.4.1.164.3.2.3.2.15.2.1.2 | ColumnprtIn1p6VcPbxSltIdx | read-only | current | This object indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. |
| 1.3.6.1.4.1.164.3.2.3.2.15.2.1.3 | ColumnprtIn1p6VcPbxPrtIdx | read-only | current | A unique identifier of the port, within the card. |
| 1.3.6.1.4.1.164.3.2.3.2.15.2.1.4 | ColumnprtIn1p6VcPbxConnect | read-write | current | This object indicates whether the port should be considered in any of the mux algorithms. |
| 1.3.6.1.4.1.164.3.2.3.2.15.2.1.5 | ColumnprtIn1p6VcPbxRate | read-write | current | This object indicates the port Rate. For Normal mode (prtIn7p8VcPbxMode=normal), only part of the values are valid (constant rate). For Server mode (prtIn7p8Vc… |
| 1.3.6.1.4.1.164.3.2.3.2.15.2.1.6 | ColumnprtIn1p6VcPbxEchoCanceler | read-write | current | Echo canceler activation. |
| 1.3.6.1.4.1.164.3.2.3.2.15.2.1.7 | ColumnprtIn1p6VcPbxPabxTs | read-only | current | This object defines the PABX Time-Slot assigned to this internal port. For a T1 link, the valid values are: 1 .. 24. For an E1 link, the valid values are: 1 ..… |
| 1.3.6.1.4.1.164.3.2.3.2.15.3 | TableprtIn7p8VcPbxCnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.15.3.1 | RowprtIn7p8VcPbxCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.15.3.1.1 | ColumnprtIn7p8VcPbxCnfgIdx | read-only | current | This object indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg |
| 1.3.6.1.4.1.164.3.2.3.2.15.3.1.2 | ColumnprtIn7p8VcPbxSltIdx | read-only | current | This object indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. |
| 1.3.6.1.4.1.164.3.2.3.2.15.3.1.3 | ColumnprtIn7p8VcPbxPrtIdx | read-only | current | A unique identifier of the port, within the card. |
| 1.3.6.1.4.1.164.3.2.3.2.15.3.1.4 | ColumnprtIn7p8VcPbxConnect | read-write | current | This object indicates whether the port should be considered in any of the mux algorithms. |
| 1.3.6.1.4.1.164.3.2.3.2.15.3.1.5 | ColumnprtIn7p8VcPbxMode | read-write | current | This object indicates the working mode of the port: - normal - the compressed voice will be sent to an MTML card inside the Mux. - server - the compressed voic… |
| 1.3.6.1.4.1.164.3.2.3.2.15.3.1.6 | ColumnprtIn7p8VcPbxRate | read-write | current | This object indicates the port Main Rate. For Server mode (prtIn7p8VcPbxMode=server), the value will be notApplicable. |
| 1.3.6.1.4.1.164.3.2.3.2.15.3.1.7 | ColumnprtIn7p8VcPbxSignalMode | read-write | current | This object indicates the Signal Mode. For Server mode (prtIn7p8VcPbxMode=server), the only valid values are: - none - aBit |
| 1.3.6.1.4.1.164.3.2.3.2.15.3.1.8 | ColumnprtIn7p8VcPbxOos | read-write | current | Out of service Signaling mode. |
| 1.3.6.1.4.1.164.3.2.3.2.15.3.1.9 | ColumnprtIn7p8VcPbxLinkTo | read-write | deprecated | This object indicates the slot of the ML card to which the VC card is mapped. In the ?004 Unit the entries io6(10)..io12(16) are not valid. For Server mode (pr… |
| 1.3.6.1.4.1.164.3.2.3.2.15.4 | TableprtExVcPbxTsTable | not-accessible | current | The write operation into the table objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.15.4.1 | RowprtExVcPbxTsEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.15.4.1.1 | ColumnprtExVcPbxTsCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.15.4.1.2 | ColumnprtExVcPbxTsSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid |
| 1.3.6.1.4.1.164.3.2.3.2.15.4.1.3 | ColumnprtExVcPbxTsPrtIdx | read-only | current | This attribute indicates a unique port number. VCPBX/E1, VCPBX/T1, VFPBX/E1, VFPBX/T1, VF-24/T1 and VF-30 cards have only one external interface. VF-48/T1 and … |
| 1.3.6.1.4.1.164.3.2.3.2.15.4.1.4 | ColumnprtExVcPbxTsIdx | read-only | current | This attribute indicates a unique PABX time slot position. The valid time slots are 1..24 for T1 cards and 1..31 for E1 cards. |
| 1.3.6.1.4.1.164.3.2.3.2.15.4.1.5 | ColumnprtExVcPbxTsMode | read-write | current | This attribute indicates the usage, process and way of the specific PABX TS towards its destination: unused - the TS is not used (no processing, no destination… |
| 1.3.6.1.4.1.164.3.2.3.2.15.4.1.6 | ColumnprtExVcPbxTsIConSlot | read-write | current | For VF-PBX cards, the io1..io12 values are applicable only when prtExVcPbxTsMode=compressed. Otherwise, its value should be noConnect. For VF-24/30/48/60 cards… |
| 1.3.6.1.4.1.164.3.2.3.2.15.4.1.7 | ColumnprtExVcPbxTsIConPrt | read-write | current | This attribute indicates the port to which this TS is connected. For VF-PBX cards, only inPrt1..inPrt6 ports are valid. For VF-24/30/48/60 cards: - for prtExVc… |
| 1.3.6.1.4.1.164.3.2.3.2.15.4.1.8 | ColumnprtExVcPbxTsIConTs | read-write | current | This attribute indicates the ML TS to which this TS is connected. This object is not applicable for VF-PBX cards. For VF-24/30/48/60 cards it is applicable onl… |
| 1.3.6.1.4.1.164.3.2.3.2.15.4.1.9 | ColumnprtExVcPbxTsRemPrt | read-write | current | This attribute indicates the end-point port on the Remote unit. VF-24/T1 and VF-30/E1 cards have one external interface. VF-48/T1 and VF-60/E1 cards have two e… |
| 1.3.6.1.4.1.164.3.2.3.2.15.4.1.10 | ColumnprtExVcPbxTsRemTs | read-write | current | This attribute indicates the end-point TS on the Remote unit. The valid time slots are 1..24 for T1 ports and 1..31 for E1 ports. notApplicable - 255. |
| 1.3.6.1.4.1.164.3.2.3.2.15.4.1.11 | ColumnprtExVcPbxTsRemConnID | read-write | current | This attribute indicates the Connection ID with the Remote unit. notApplicable = 0. |
| 1.3.6.1.4.1.164.3.2.3.2.15.4.1.12 | ColumnprtExVcPbxTsSourceSlot | read-write | current | For VFS cards. These cards offer Compresed Voice Services for Analog Voice ports of the MP. This object indicates the Source Slot of the Analog Voice port we w… |
| 1.3.6.1.4.1.164.3.2.3.2.15.4.1.13 | ColumnprtExVcPbxTsSourcePrt | read-write | current | For VFS cards. These cards offer Compresed Voice Services for Analog Voice ports of the MP. This object indicates the Source Port within the Slot of the Analog… |
| 1.3.6.1.4.1.164.3.2.3.2.16 | NodeprtIsdnCnfg | |||
| 1.3.6.1.4.1.164.3.2.3.2.16.1 | TableprtIsdnCnfgTable | not-accessible | current | The write operation into the table objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.16.1.1 | RowprtIsdnCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.16.1.1.1 | ColumnprtIsdnCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.16.1.1.2 | ColumnprtIsdnSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid For KM2100/4 Valid ent… |
| 1.3.6.1.4.1.164.3.2.3.2.16.1.1.3 | ColumnprtIsdnPrtIdx | read-only | current | This attribute indicates a unique port number. For MAXcess the values will be: exPrt1(1), exPrt2(2), exPrt3(3), exPrt4(4), For KM-2100 the port index is calcul… |
| 1.3.6.1.4.1.164.3.2.3.2.16.1.1.4 | ColumnprtIsdnConnect | read-write | current | This attribute indicates if the port is connected. |
| 1.3.6.1.4.1.164.3.2.3.2.16.1.1.5 | ColumnprtIsdnSignalingProtocol | read-write | current | This attribute fixes which signaling protocol is used at this port (D-Channel). It is equivalent to isdnSignalingProtocol in the isdn MIB. |
| 1.3.6.1.4.1.164.3.2.3.2.16.1.1.6 | ColumnprtIsdnBasicRateLineTopology | read-write | current | This attribute is relevant for ISDN BRI only. It is equivalent to isdnBasicRateLineTopology in the isdn MIB. |
| 1.3.6.1.4.1.164.3.2.3.2.16.1.1.7 | ColumnprtIsdnMode | read-write | current | This attribute allows the user to configure the port as leased(2) in case of connection to a TDM network. |
| 1.3.6.1.4.1.164.3.2.3.2.16.1.1.8 | ColumnprtIsdnFilter | read-write | current | This attribute allows the user to configure the port: answerAll(2): accept all incoming calls, rejectAll(3): reject all incoming calls, selective(4): accept or… |
| 1.3.6.1.4.1.164.3.2.3.2.16.1.1.9 | ColumnprtIsdnSimultaneousCall | read-write | current | In case of simultaneous call (local,remote and remote,local): accept(2): accept the incoming call, reject(3): reject the incoming call. |
| 1.3.6.1.4.1.164.3.2.3.2.16.1.1.10 | ColumnprtIsdnNumOfAbstractTerm | read-write | current | An object for KM2100/4 agents. 255=Not Applicable When ISDN Standard = ETSI or NTT (European) the value should be 255 (NotApplicable) else If ML speed is 64Kbp… |
| 1.3.6.1.4.1.164.3.2.3.2.16.1.1.11 | ColumnprtIsdnSwitchMode | read-write | current | For KM2100. auto - The call is initiated automatically by one of the IO cards connected to KML.10(ISDN card) having ISDN Switch Mode. manual - The call is init… |
| 1.3.6.1.4.1.164.3.2.3.2.16.1.1.12 | ColumnprtIsdnAbSide | read-write | current | This parameter indicates the QSIG side in layer 3. This definition is from the QSIG Standard. |
| 1.3.6.1.4.1.164.3.2.3.2.16.1.1.13 | ColumnprtIsdnQsigRole | read-write | current | This parameter indicates the QSIG side in layer 1 & 2. |
| 1.3.6.1.4.1.164.3.2.3.2.16.1.1.14 | ColumnprtIsdnInterface | read-write | current | It indicates the interface type: lt = line termination nt = network termination te = terminal equipment. |
| 1.3.6.1.4.1.164.3.2.3.2.16.1.1.15 | ColumnprtIsdnCallMode | read-write | current | This object indicates the acceptance of incoming calls. Initiate - Callout Listen - Callin. |
| 1.3.6.1.4.1.164.3.2.3.2.16.1.1.16 | ColumnprtIsdnCallBackTimeout | read-write | current | This object is applicable only if 'prtIsdnFilter' is 'CallBack' and determines how long to wait from receiving the incoming call until initiating the call back… |
| 1.3.6.1.4.1.164.3.2.3.2.16.2 | TableprtIsdnEndpointTable | not-accessible | current | The write operation into the table objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.16.2.1 | RowprtIsdnEndpointEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.16.2.1.1 | ColumnprtIsdnEndpointCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.16.2.1.2 | ColumnprtIsdnEndpointSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In ?004 Unit the entries io6(10)..io12(16) are not valid For KM2100/4 Valid entries… |
| 1.3.6.1.4.1.164.3.2.3.2.16.2.1.3 | ColumnprtIsdnEndpointPrtIdx | read-only | current | This attribute indicates a unique port number. For MAXcess the values will be: exPrt1(1), exPrt2(2), exPrt3(3), exPrt4(4), For KM-2100 the port index is calcul… |
| 1.3.6.1.4.1.164.3.2.3.2.16.2.1.4 | ColumnprtIsdnEndpointIdx | read-only | current | Since more than one endpoint may be defined per isdn entity, this field is a simple index. It corresponds to isdnEndpointIdx in the isdn MIB. |
| 1.3.6.1.4.1.164.3.2.3.2.16.2.1.5 | ColumnprtIsdnEndpointTeiType | read-create | current | The type of TEI (Terminal Endpoint Identifier) used for this Terminal Endpoint. In case of dynamic(1), the TEI value is selected by the switch. In case of stat… |
| 1.3.6.1.4.1.164.3.2.3.2.16.2.1.6 | ColumnprtIsdnEndpointTeiValue | read-create | current | When the TEI Type is static, the value of the TEI should be between 0 and 63. Else, it is not selectable by user. 255 = notApplicable. It corresponds to isdnEn… |
| 1.3.6.1.4.1.164.3.2.3.2.16.2.1.7 | ColumnprtIsdnEndpointSpid | read-create | current | The Service profile IDentifier (SPID) information for this Terminal Endpoint. It is is composed of 9-20 numeric characters. It corresponds to isdnEndpointSpid … |
| 1.3.6.1.4.1.164.3.2.3.2.16.2.1.8 | ColumnprtIsdnEndpointBearerCh | read-create | current | This is the selected dialing channel. anyChannel - the system selects the dialing channel. |
| 1.3.6.1.4.1.164.3.2.3.2.16.2.1.9 | ColumnprtIsdnEndpointRowStatus | read-create | current | This field indicates whether to consider this endpoint or not. The only possible supported RowStatus vaules are active (1) and destroy (6). |
| 1.3.6.1.4.1.164.3.2.3.2.16.3 | TableprtIsdnDirectoryTable | not-accessible | current | The write operation into the table objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.16.3.1 | RowprtIsdnDirectoryEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.16.3.1.1 | ColumnprtIsdnDirectoryCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.16.3.1.2 | ColumnprtIsdnDirectorySltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. For MX300/30 ports: io1(5) = isdn1(5) and io2(6) = isdn2(6). In ?004 Unit the entri… |
| 1.3.6.1.4.1.164.3.2.3.2.16.3.1.3 | ColumnprtIsdnDirectoryPrtIdx | read-only | current | For MAXcess this is the internal port number: 101, 102,.... For KM-2100 the port index is calculated as follows: 100*Slot+Ch |
| 1.3.6.1.4.1.164.3.2.3.2.16.3.1.4 | ColumnprtIsdnDirectoryLocalAddr | read-create | current | This is the local address associated with this entry. - For MX: Size=17 , Default=0 (17 characters) - For KM: Size=20, Default=blank (20 characters) |
| 1.3.6.1.4.1.164.3.2.3.2.16.3.1.5 | ColumnprtIsdnDirectoryLocalSubAddr | read-create | current | This is the local subaddress associated with this entry. - For MX: Size=6 , Default=0 (6 characters) - For KM: Size=4 , Default=blank (4 characters) |
| 1.3.6.1.4.1.164.3.2.3.2.16.3.1.6 | ColumnprtIsdnDirectoryRemoteAddr | read-create | current | This is the remote address associated with this entry. - For MX: Size=17 , Default=0 (17 characters) - For KM: Size=20, Default=blank (20 characters) |
| 1.3.6.1.4.1.164.3.2.3.2.16.3.1.7 | ColumnprtIsdnDirectoryRemoteSubAddr | read-create | current | This is the remote subaddress associated with this entry. - For MX: Size=6 , Default=0 (6 characters) - For KM: Size=4 , Default=blank (4 characters) |
| 1.3.6.1.4.1.164.3.2.3.2.16.3.1.8 | ColumnprtIsdnDirectoryPrtNu | read-create | current | This is the external port number connected to this entry. |
| 1.3.6.1.4.1.164.3.2.3.2.16.3.1.9 | ColumnprtIsdnDirectoryTeiId | read-create | current | This is the abstract terminal id if relevant, connected to this entry. |
| 1.3.6.1.4.1.164.3.2.3.2.16.3.1.10 | ColumnprtIsdnDirectoryRowStatus | read-create | current | This is the status for the row. It allows to know whether to consider this row or not. The only possible supported RowStatus vaules are active (1) and destroy … |
| 1.3.6.1.4.1.164.3.2.3.2.16.3.1.11 | ColumnprtIsdnDirectoryLocalAddr2 | read-create | current | This is the second local address associated with this entry. - For MX: Size=17 , Default=0 (17 characters) - For KM: Size=20, Default=blank (20 characters) |
| 1.3.6.1.4.1.164.3.2.3.2.16.3.1.12 | ColumnprtIsdnDirectoryLocalSubAddr2 | read-create | current | This is the second local subaddress associated with this entry. - For MX: Size=6 , Default=0 (6 characters) - For KM: Size=4 , Default=blank (4 characters) |
| 1.3.6.1.4.1.164.3.2.3.2.16.3.1.13 | ColumnprtIsdnDirectoryRemoteAddr2 | read-create | current | This is the second remote address associated with this entry. - For MX: Size=17 , Default=0 (17 characters) - For KM: Size=20, Default=blank(20 characters) |
| 1.3.6.1.4.1.164.3.2.3.2.16.3.1.14 | ColumnprtIsdnDirectoryRemoteSubAddr2 | read-create | current | This is the second remote subaddress associated with this entry. - For MX: Size=6 , Default=0 (6 characters) - For KM: Size=4 , Default=blank (4 characters) |
| 1.3.6.1.4.1.164.3.2.3.2.17 | NodeprtLogicalCnfg | |||
| 1.3.6.1.4.1.164.3.2.3.2.17.1 | TableprtLogicalCnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.17.1.1 | RowprtLogicalCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.17.1.1.1 | ColumnprtLogicalCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.17.1.1.2 | ColumnprtLogicalSltIdx | read-only | current | Slot Index. For ISDN BRI Ports of MX300/30, io1(5) = isdn1(5) and io2(6) = isdn2(6). |
| 1.3.6.1.4.1.164.3.2.3.2.17.1.1.3 | ColumnprtLogicalPrtIdx | read-only | current | This attribute indicates a unique port number. This port number should be an internal port number: inPrt1(101)->inPrt50(150), linkSel1(200)->linkSel50(250), en… |
| 1.3.6.1.4.1.164.3.2.3.2.17.1.1.4 | ColumnprtLogicalConnect | read-create | current | This attribute indicates whether the port should be considered in any of the mux algorithms. |
| 1.3.6.1.4.1.164.3.2.3.2.17.1.1.5 | ColumnprtLogicalFunction | read-create | current | This parameter defines the function of the relevant channel. |
| 1.3.6.1.4.1.164.3.2.3.2.17.1.1.6 | ColumnprtLogicalRowStatus | read-create | current | This parameter allows the NMS to create/delete logical ports. The only possible supported RowStatus vaules are active (1) and destroy (6). |
| 1.3.6.1.4.1.164.3.2.3.2.17.2 | TablelinkSelectorCnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.17.2.1 | RowlinkSelectorCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.17.2.1.1 | ColumnlinkSelectorCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.17.2.1.2 | ColumnlinkSelectorSltIdx | read-only | current | Slot Index |
| 1.3.6.1.4.1.164.3.2.3.2.17.2.1.3 | ColumnlinkSelectorPrtIdx | read-only | current | This attribute indicates a unique port number. This port number should be internal port number: higher or equal to linkSeL1(201). |
| 1.3.6.1.4.1.164.3.2.3.2.17.2.1.4 | ColumnlinkSelectorMaxIdleTime | read-write | current | Move to higher prioritized connected link after this period of seconds of silence on the current link. 0=move immediately to higher prioritized connected link.… |
| 1.3.6.1.4.1.164.3.2.3.2.17.2.1.5 | ColumnlinkSelectorMode | read-write | current | If the link selector is in mode: backup(2)=then the link with the lower priority will be used in case of failure of the higher priority link, bod(3)=bandwidth … |
| 1.3.6.1.4.1.164.3.2.3.2.17.2.1.6 | ColumnlinkSelectorRevert | read-write | current | If the link selector is in mode backup: auto(2)=return automatically to Main link when it is OK. manual(3)=stays connected to backup link. |
| 1.3.6.1.4.1.164.3.2.3.2.17.2.1.7 | ColumnlinkSelectorMinBUSession | read-write | current | Minimum duration of a backup session before returning to Main Link. Relevant in Backup Mode and when Revert is auto(2). Value 255 is for NEVER which means neve… |
| 1.3.6.1.4.1.164.3.2.3.2.17.3 | TablelinkSelectorPLinkTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.17.3.1 | RowlinkSelectorPLinkEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.17.3.1.1 | ColumnpLinkCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.17.3.1.2 | ColumnpLinkSltIdx | read-only | current | Slot Index |
| 1.3.6.1.4.1.164.3.2.3.2.17.3.1.3 | ColumnpLinkPrtIdx | read-only | current | This attribute indicates a unique port number. This port number should be the link selector number. |
| 1.3.6.1.4.1.164.3.2.3.2.17.3.1.4 | ColumnpLinkIdx | read-only | current | This index is the row number. |
| 1.3.6.1.4.1.164.3.2.3.2.17.3.1.5 | ColumnpLinkSlotNu | read-write | current | The slot of the prioritized link. For ISDN BRI ports of MX300/30, io1(5) = isdn1(5) and io2(6) = isdn2(6). |
| 1.3.6.1.4.1.164.3.2.3.2.17.3.1.6 | ColumnpLinkPortNu | read-write | current | The port of the prioritized link. Value 100 is for noConnect. |
| 1.3.6.1.4.1.164.3.2.3.2.17.3.1.7 | ColumnpLinkPrioNu | read-write | current | The priority of the prioritized link. MIN=1...., MAX=8. |
| 1.3.6.1.4.1.164.3.2.3.2.17.3.1.8 | ColumnpLinkVRate | read-write | current | The rate to use with this link. |
| 1.3.6.1.4.1.164.3.2.3.2.18 | NodeprtFrPlusCnfg | |||
| 1.3.6.1.4.1.164.3.2.3.2.18.1 | TableprtFrPlusCnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.18.1.1 | RowprtFrPlusCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.18.1.1.1 | ColumnprtFrPlusCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.18.1.1.2 | ColumnprtFrPlusSltIdx | read-only | current | Slot Index. For ISDN BRI Ports of MX300/30, io1(5) = isdn1(5) and io2(6) = isdn2(6). |
| 1.3.6.1.4.1.164.3.2.3.2.18.1.1.3 | ColumnprtFrPlusPrtIdx | read-only | current | This attribute indicates a unique port number. This port number should be: - for ISDN cards: inPrt1(101)->inPrt50(150) - for MHS1 card : exPrt1(1) - for MHS3, … |
| 1.3.6.1.4.1.164.3.2.3.2.18.1.1.4 | ColumnprtFrPlusNotSegmentedPriorities | read-write | current | This parameter is relevant only for FR+ protocol and asks the MXcess NOT to segment data with specified priorities: from LSB: bit 1 is for priority 1, bit 2 is… |
| 1.3.6.1.4.1.164.3.2.3.2.19 | NodeprtMl4Cnfg | |||
| 1.3.6.1.4.1.164.3.2.3.2.19.1 | TableprtMl4CnfgTable | not-accessible | current | This is an extension table for MTML-4 card parameters. |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1 | RowprtMl4CnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.1 | ColumnprtMl4CnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. The write operation is valid only to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.2 | ColumnprtMl4SltIdx | read-only | current | This attribute indicates a unique slot position where the module is inserted. |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.3 | ColumnprtMl4PrtIdx | read-only | current | This attribute indicates a unique port number. |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.4 | ColumnprtMl4SigProfile | read-write | current | This object indicates the Signaling Profile of the port. none - when the Frame is G732N (no MF) or Unframed. p1 = profile 1 p2 = profile 2 p3 = profile 3 p4 = … |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.5 | ColumnprtMl4CGA | read-write | current | This object selects the method used to signal the CGA state to the other end, through the main link. 'none' - non-transparent mode. When one of the links (main… |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.6 | ColumnprtMl4Oos | read-write | current | 'idle' = '0' = on-hook, idle state 'busy' = '1' = off-hook, busy state 'forcedIdle' = SP = both A and B signaling bits are forced to '0' during out-of-service … |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.7 | ColumnprtMl4VoiceOos | read-write | current | Voice Out-Of-Service code. Valid range: (0 - FF HEX). For agents that do not support this feature, the value will always be 0. |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.8 | ColumnprtMl4DataOos | read-write | current | Data Out-Of-Service code. Valid range: (0 - FF HEX). For agents that do not support this feature, the value will always be 0. |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.9 | ColumnprtMl4Service | read-write | current | Link Service. leasedLine - usual TDM interface. v51 - V5.1 interface. v52Master - V5.2 Link to Local Exchange. v52Slave - a ML that is transferred to the v52Ma… |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.10 | ColumnprtMl4IpAddress | read-write | current | IP Address of the port. |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.11 | ColumnprtMl4IpMask | read-write | current | IP subnet mask of the port. |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.12 | ColumnprtMl4SignalingMode | read-write | current | Refers to the signaling mode of the port (or framer module). notApplicable(1)- means that no framer is needed for this port (no signaling), or that this object… |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.13 | ColumnprtMl4EchoCanceler | read-write | current | Echo canceler activation. |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.14 | ColumnprtMl4OosErrorSource | read-write | current | OOS (Out-of-Service) Error Source. This object is applicable for T1 ports only. |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.15 | ColumnprtMl4OosEntryThreshold | read-write | current | This object defines the number of Errors per Second that determine the minimum unacceptable noise level. This value will be the Entry Threshold to the OOS (Out… |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.16 | ColumnprtMl4OosExitThreshold | read-write | current | This object defines the number of consecutive Error-Free-Seconds before going from OOS state to Normal state. This value will be the Exit Threshold from the OO… |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.17 | ColumnprtMl4LogicalLinkId | read-write | current | This object defines for a V5.2 Master ML the Logical Link Id. Valid values are: 0..256. NA=257. |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.18 | ColumnprtMl4DedicatedTs | read-write | current | A unique number to identify Dedicated TS of the E1 port (V5.2). It is applicable only when prtMl4Service=v52Slave and prtExPh1MlInbandMng selected is dedicated… |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.19 | ColumnprtMl4RemCrc | read-write | current | This object indicates whether the E1 of the Remote device connected to this E1 port, will have CRC-4 or not. |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.20 | ColumnprtMl4CrossConnectLevel | read-write | current | This object indicates whether the cross connect is on DS1 or DS0 (time-slots) level. When cross connect level is ds1, Destination Slot is indicated by prtGenCn… |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.21 | ColumnprtMl4PppEchoFailDetection | read-write | current | This object indicates whether the PPP Echo is taken into account for its Fail Detection. This object is relevant when Inband Mng between devices is Dedicated T… |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.22 | ColumnprtMl4EcanCasControl | read-write | current | This object enables/disables ECAN (Echo Canceller) control activation/deactivation sent via the A, B, C, D multiframe signaling BITs. |
| 1.3.6.1.4.1.164.3.2.3.2.20 | NodeprtAcmCnfg | |||
| 1.3.6.1.4.1.164.3.2.3.2.20.1 | TableprtAcmCnfgTable | not-accessible | current | This is a table for ACM port parameters. |
| 1.3.6.1.4.1.164.3.2.3.2.20.1.1 | RowprtAcmCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.20.1.1.1 | ColumnprtAcmCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. The write operation is valid only to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.20.1.1.2 | ColumnprtAcmSltIdx | read-only | current | This attribute indicates a unique slot position where the module is inserted. |
| 1.3.6.1.4.1.164.3.2.3.2.20.1.1.3 | ColumnprtAcmPrtIdx | read-only | current | This attribute indicates a unique port number. |
| 1.3.6.1.4.1.164.3.2.3.2.20.1.1.4 | ColumnprtAcmConnect | read-write | current | This attribute indicates whether the port should be connected or not. Only a connected port can perform activity. |
| 1.3.6.1.4.1.164.3.2.3.2.20.1.1.5 | ColumnprtAcmActiveState | read-write | current | This attribute indicates the Electric Active State of the port. |
| 1.3.6.1.4.1.164.3.2.3.2.20.1.1.6 | ColumnprtAcmAlrString | read-write | current | Alarm string selected by user for the Inbound ports. This object is applicable only for the Inbound Ports: ext-5..ext-12. For the Outbound Ports (ext-1..ext-4)… |
| 1.3.6.1.4.1.164.3.2.3.2.21 | NodeprtE2Cnfg | |||
| 1.3.6.1.4.1.164.3.2.3.2.21.1 | TableprtE2CnfgTable | not-accessible | current | This is a table for E2 port parameters. |
| 1.3.6.1.4.1.164.3.2.3.2.21.1.1 | RowprtE2CnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.21.1.1.1 | ColumnprtE2CnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. The write operation is valid only to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.21.1.1.2 | ColumnprtE2SltIdx | read-only | current | This attribute indicates a unique slot position where the module is inserted. |
| 1.3.6.1.4.1.164.3.2.3.2.21.1.1.3 | ColumnprtE2PrtIdx | read-only | current | This attribute indicates a unique port number. |
| 1.3.6.1.4.1.164.3.2.3.2.21.1.1.4 | ColumnprtE2Connect | read-write | current | This attribute indicates whether the port should be connected or not. Only a connected port can perform activity. |
| 1.3.6.1.4.1.164.3.2.3.2.21.1.1.5 | ColumnprtE2MngOnNationalBit | read-write | current | This attribute indicates whether National Bit will be used for Management or not. |
| 1.3.6.1.4.1.164.3.2.3.2.22 | NodeprtLanWanCnfg | |||
| 1.3.6.1.4.1.164.3.2.3.2.22.1 | TableprtLanWanCnfgTable | not-accessible | current | This is a table for Lan-Wan port parameters. |
| 1.3.6.1.4.1.164.3.2.3.2.22.1.1 | RowprtLanWanCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.22.1.1.1 | ColumnprtLanWanCnfgIdx | not-accessible | current | This object indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. The write operation is valid only to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.22.1.1.2 | ColumnprtLanWanSltIdx | not-accessible | current | This object indicates a unique slot position where the module is inserted. |
| 1.3.6.1.4.1.164.3.2.3.2.22.1.1.3 | ColumnprtLanWanPrtIdx | not-accessible | current | This object indicates a unique number to identify a port in a specific card. Generally, for MP-210X/2200, the Port Index will be according to the external/inte… |
| 1.3.6.1.4.1.164.3.2.3.2.22.1.1.4 | ColumnprtLanWanMode | read-write | current | This object determines the working mode of this port. For FCD155, layer3SubnetSwitch is not applicable |
| 1.3.6.1.4.1.164.3.2.3.2.22.1.1.5 | ColumnprtLanWanDestIf | read-write | current | This object determines the Destination Interface for the frames received by this port. - Switching Table = 100 (it means that the destination interface will be… |
| 1.3.6.1.4.1.164.3.2.3.2.22.1.1.6 | ColumnprtLanWanEgressVlanMode | read-write | current | This object determines what to do with the VLAN frames that exit via the WAN side of the port. This object is not applicable when prtLanWanMode=l3SubnetSwitch(… |
| 1.3.6.1.4.1.164.3.2.3.2.22.1.1.7 | ColumnprtLanWanL2Protocol | read-write | current | L2 Protocol. When prtLanWanMode=l3SubnetSwitch(4), the only valid value is ppp(3). |
| 1.3.6.1.4.1.164.3.2.3.2.22.1.1.8 | ColumnprtLanWanStpPriority | read-write | current | The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. |
| 1.3.6.1.4.1.164.3.2.3.2.22.1.1.9 | ColumnprtLanWanStpCost | read-write | current | The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value o… |
| 1.3.6.1.4.1.164.3.2.3.2.22.1.1.10 | ColumnprtLanWanToLanVlanMode | read-write | current | This object determines what to do with the VLAN frames that come from WAN side of the port and exit towards one of the LAN ports. This object is applicable onl… |
| 1.3.6.1.4.1.164.3.2.3.2.22.1.1.11 | ColumnprtLanWanVlanId | read-write | current | This is the VLAN Id attached to a frame, when the relevant Vlan Mode (prtLanWanEgressVlanMode or prtLanWanToLanVlanMode) is tag or doubleTag. 0=not applicable. |
| 1.3.6.1.4.1.164.3.2.3.2.22.1.1.12 | ColumnprtLanWanVlanPriority | read-write | current | This is the VLAN Priority attached to a frame, when the relevant Vlan Mode (prtLanWanEgressVlanMode or prtLanWanToLanVlanMode) is tag or doubleTag. Valid value… |
| 1.3.6.1.4.1.164.3.2.3.2.22.1.1.13 | ColumnprtLanWanMtu | read-write | current | The size of the largest packet which can be sent/received on the interface, specified in octets. Valid values change per device. 0=not applicable. |
| 1.3.6.1.4.1.164.3.2.3.2.22.1.1.14 | ColumnprtLanWanVlanType | read-write | current | This oject indicates type of VLAN this port is assigned to. Port Base Vlan parameters are defined by objects under radBridgePortBaseVlan |
| 1.3.6.1.4.1.164.3.3 | NodedacsMux | |||
| 1.3.6.1.4.1.164.3.3.0 | IdentitydacsMuxEvents | current | The events for DACS MUX. | |
| 1.3.6.1.4.1.164.3.3.0.1 | NotificationsanityCheckTrap | current | This trap is sent after a data base download attempt. It returns the sanity result status and the configuration no.checked. | |
| 1.3.6.1.4.1.164.3.3.0.2 | NotificationdacsMuxAlarmsTrap | current | This trap is sent when an alarm occurs. | |
| 1.3.6.1.4.1.164.3.3.0.3 | NotificationmdlConnectTrap | current | This trap is sent when a card is removed. | |
| 1.3.6.1.4.1.164.3.3.0.4 | NotificationsysAlrStatusTrap | current | This trap is sent upon any change in the value of any of the variables. | |
| 1.3.6.1.4.1.164.3.3.0.5 | NotificationsysStatusChangedTrap | current | This trap is sent when Leds status is changed. | |
| 1.3.6.1.4.1.164.3.3.0.6 | NotificationcnfgUpdateTrap | current | This trap is sent upon change of the active Configuration DB. | |
| 1.3.6.1.4.1.164.3.3.0.7 | NotificationsysRedundancyStatusTrap | current | The trap is sent upon change in Redundancy Status. | |
| 1.3.6.1.4.1.164.3.3.0.8 | NotificationsysRedundancyActiveCardTrap | current | The trap is sent upon change of Active Main/CL Card. | |
| 1.3.6.1.4.1.164.3.3.0.9 | NotificationsysRedundancyActivePortTrap | current | The trap is sent upon change of Active Port of Redundancy Group. | |
| 1.3.6.1.4.1.164.3.3.1 | NodesystemDacsMux | |||
| 1.3.6.1.4.1.164.3.3.1.1 | NodesysSa | |||
| 1.3.6.1.4.1.164.3.3.1.1.1 | ScalarsysSaSwchStatus | read-only | current | This object indicates the status of the switches on the SA unit. Each switch is represented by a bit. The status is a sum of 2**n, according to the bits. For S… |
| 1.3.6.1.4.1.164.3.3.1.1.2 | ScalarsysSaSwRevision | read-only | current | This object indicates the Software revision of the system. |
| 1.3.6.1.4.1.164.3.3.1.1.3 | ScalarsysSaHwVersion | read-only | current | This object indicates the Hardware version of the system. |
| 1.3.6.1.4.1.164.3.3.1.1.4 | ScalarsysSaPorts | read-only | current | This object indicates the ports that are present in the system. Each possible port is represented by a bit. The value of this object is a sum of 2**n, n=number… |
| 1.3.6.1.4.1.164.3.3.1.1.5 | ScalarsysSaReadSwch | read-write | current | This object indicates wether the configuration will be read from the DIP switches on the SA (stand alone) unit. Each switch is represented by a bit. If the bit… |
| 1.3.6.1.4.1.164.3.3.1.1.6 | ScalarsysSaBuActivePort | read-only | current | This object shows through which port the traffic is flowing (the current Active Port) when the Backup mechanism exists. When No Backup exists in the device, th… |
| 1.3.6.1.4.1.164.3.3.1.2 | NodesysHub | |||
| 1.3.6.1.4.1.164.3.3.1.2.1 | NodesysChas | |||
| 1.3.6.1.4.1.164.3.3.1.2.1.1 | ScalarchassTotalNoOfSlt | read-only | current | This object indicates the number of physical slots in the Hub chassis. |
| 1.3.6.1.4.1.164.3.3.1.2.1.2 | ScalarchassTotalNoOfIoSlt | read-only | current | This object indicates the total number of physical IO slots in the chassis, (not all slots must be occupied and active). |
| 1.3.6.1.4.1.164.3.3.1.2.1.3 | ScalarchassTotalNoOfPsSlt | read-only | current | This object indicates the number of physical Power Supply slots in the chassis. |
| 1.3.6.1.4.1.164.3.3.1.2.1.4 | ScalarchassTotalNoOfClSlt | read-only | current | This object indicates the number of physical Common Logic slots in the chassis. |
| 1.3.6.1.4.1.164.3.3.1.2.1.5 | ScalarchassTotalNoOfMlSlt | read-only | current | This object indicates the number of physical Main Link slots in the chassis (Kmux). |
| 1.3.6.1.4.1.164.3.3.1.2.2 | NodesysDcl | |||
| 1.3.6.1.4.1.164.3.3.1.2.2.1 | TablesysDclTable | not-accessible | current | All the entries of this table are identical (have the same value) for all the configurations (1..255) except the TmpCnfg. The write operation into the Table Ob… |
| 1.3.6.1.4.1.164.3.3.1.2.2.1.1 | RowsysDclEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.1.2.2.1.1.1 | ColumnsysDclCnfgIdx | read-only | current | This object indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg. This object is identical for all the configurations (1..2… |
| 1.3.6.1.4.1.164.3.3.1.2.2.1.1.2 | ColumnsysDclRedundancy | read-write | current | DCL redundancy desired state. |
| 1.3.6.1.4.1.164.3.3.1.2.2.1.1.3 | ColumnsysDclActiveCl | read-write | current | Active desired DCL. When 'auto' is selected, the system automatically selects the active DCL. |
| 1.3.6.1.4.1.164.3.3.1.2.2.1.1.4 | ColumnsysDclFlipDelay | read-write | current | If one DCL flip occurred and a second one should be performed, the time from the previous flip is checked. If the time is shorter than the delay specified here… |
| 1.3.6.1.4.1.164.3.3.1.2.2.1.1.5 | ColumnsysDclFlipUponStnClk | read-write | current | This object allows user to decide (yes/no) if Agent should Flip from one DCL card to another, when there is Station Clock Fail in the Online DCL card. |
| 1.3.6.1.4.1.164.3.3.1.2.2.1.1.6 | ColumnsysDclChFailThreshold | read-write | current | This object indicates the number of failed channels that will trigger the redundancy procedure. |
| 1.3.6.1.4.1.164.3.3.1.2.2.1.1.7 | ColumnsysDclChPriority | read-write | current | This object indicates the Priority for all the channels in the Main Access (Common Logic) card. Each channel is represented by 1 bit. The order of the bits in … |
| 1.3.6.1.4.1.164.3.3.1.2.2.1.1.8 | ColumnsysDclConfigDownloadSrc | read-write | current | In case of mismatch between the 2 CL card's configuration, the user can decide which card has the suitable configuration. The selected configuration will be do… |
| 1.3.6.1.4.1.164.3.3.1.2.2.1.1.9 | ColumnsysDclSwDownloadSrc | read-write | current | In case of mismatch between the 2 CL card's software, the user can decide which card has the suitable SW. The selected SW will be downloaded from card A to car… |
| 1.3.6.1.4.1.164.3.3.1.2.2.1.1.10 | ColumnsysDclRedundancyStatus | read-only | current | Bit map representing current Redundancy Status. bit 0 - Indicates mismatch between the 2 CL cards' Configuration bit 1 - Indicates mismatch between the 2 CL ca… |
| 1.3.6.1.4.1.164.3.3.1.2.2.2 | ScalarsysDclOnline | read-only | current | The active Dcl card of the agent. |
| 1.3.6.1.4.1.164.3.3.1.2.2.3 | TablesysDclCopyDbTable | not-accessible | current | This table enables to copy a cofiguration from the Offline Dcl to the Online Dcl. |
| 1.3.6.1.4.1.164.3.3.1.2.2.3.1 | RowsysDclCopyDbEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.1.2.2.3.1.1 | ColumnsysDclCopyDbIdx | read-only | current | This object indicates the Idx of the Cnfg(1..255) being accessed. |
| 1.3.6.1.4.1.164.3.3.1.2.2.3.1.2 | ColumnsysDclCopyDbCmd | read-write | current | When this command is sent to the agent, on(3), the Database specified (Db Idx), will be copied from the Offline Dcl to the Online Dcl. Afterwards the value of … |
| 1.3.6.1.4.1.164.3.3.1.2.2.4 | ScalarsysDclFlipCmd | read-write | current | When the 'flip(3)' command is received by Agent, it will flip (switch) between Offline Dcl and Online Dcl cards. Afterwards the value of this object will autom… |
| 1.3.6.1.4.1.164.3.3.1.3 | NodesysStatus | |||
| 1.3.6.1.4.1.164.3.3.1.3.1 | ScalarsysSDateFormat | read-write | current | This object indicates the date and time format used for the sysSDateAndTimeCmd and for the alarm buffer report. |
| 1.3.6.1.4.1.164.3.3.1.3.2 | ScalarsysSDateCmd | read-write | current | This object indicates the current date as it is known by the agent using its own real-time clock. The format would be as specified by the sysSDateFormat. This … |
| 1.3.6.1.4.1.164.3.3.1.3.3 | ScalarsysSTimeCmd | read-write | current | This object indicates the current time as it is known by the agent using its own real-time clock. This parameter can be set for time synchronization between th… |
| 1.3.6.1.4.1.164.3.3.1.3.4 | ScalarsysSActiveCnfg | read-only | current | This object specifies the configuration number, that is currently active and running. |
| 1.3.6.1.4.1.164.3.3.1.3.5 | ScalarsysSEditCnfg | read-only | current | This object indicates the unique configuration number that is currently loaded into the tmp working space for manipulation and update operations. Value of 255 … |
| 1.3.6.1.4.1.164.3.3.1.3.6 | ScalarsysSEditBy | read-only | current | This entry indicates which MMI application is working on the edited config. The editing phase starts at the first modify operation and ends after a load operat… |
| 1.3.6.1.4.1.164.3.3.1.3.7 | ScalarsysSClkSrc | read-only | current | This entry indicates the source of the system clock. |
| 1.3.6.1.4.1.164.3.3.1.3.8 | ScalarsysSAlrStatus | read-only | current | Indicates the current alarm state only for system level. This object will be : - critical(7): when there is at least one active (ON) critical alarm . - major (… |
| 1.3.6.1.4.1.164.3.3.1.3.9 | ScalarsysSAlrStatusAll | read-only | current | Indicates the current alarm state including all levels: system, card, port. - critical(7): when there is at least one active (ON) critical alarm . - major (3):… |
| 1.3.6.1.4.1.164.3.3.1.3.10 | ScalarsysSTestStatus | read-only | current | Indicates the current test status (for all levels: system, card, port). This attribute will be set to: - on(3): when there is at least one test in progress on … |
| 1.3.6.1.4.1.164.3.3.1.3.11 | ScalarsysSSanityCheckStatus | read-only | current | Upon completion of the Sanity Check process on the TmpCnfg this object will be set to: - fail(2): when there is at least one error (which is not just a warning… |
| 1.3.6.1.4.1.164.3.3.1.3.12 | ScalarsysSNoOfSanityCheckErr | read-only | current | This object indicates the number of errors/warnings discovered by the last Sanity Check process. |
| 1.3.6.1.4.1.164.3.3.1.3.13 | TablesysSErrListTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.3.1.3.13.1 | RowsysSErrListEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.1.3.13.1.1 | ColumnsysSErrType | read-only | current | The errors are recorded in the agent, in two separate lists, according to their type: error or warning. |
| 1.3.6.1.4.1.164.3.3.1.3.13.1.2 | ColumnsysSErrIdx | read-only | current | Unique index number to identify an entry in the error or warning list . The maximum value cannot exceed the value of 'sysSNoOfSanityCheckErr' (actually, the su… |
| 1.3.6.1.4.1.164.3.3.1.3.13.1.3 | ColumnsysSErrDescription | read-only | current | This object is a full text description of the sanity check error including error code, IO slot and port numbers related to the code . |
| 1.3.6.1.4.1.164.3.3.1.3.14 | ScalarsysSMaxNoOfCnfg | read-only | current | Maximum number of configurations that can be defined and stored in the DACS agent. If the DACS agent has a large capacity, the maximum will be limited to 254. |
| 1.3.6.1.4.1.164.3.3.1.3.15 | ScalarsysSSelfTestResult | read-only | current | The test is performed by the active Common Logic card. The result will be a sum of 2**n according to the following bit convention: For DXC: bit 0 Database 1 Ch… |
| 1.3.6.1.4.1.164.3.3.1.3.16 | ScalarsysSRelayState | read-only | current | Indicates the current state of the alarm relay. notApplicable - for agents that do not support this object. |
| 1.3.6.1.4.1.164.3.3.1.3.17 | ScalarsysSInvertedAlr | read-only | current | Indicates if there is any Inverted alarm at any level of the system (sys, card, port). notApplicable - for agents that do not support this object. |
| 1.3.6.1.4.1.164.3.3.1.3.18 | TablesysSRdnFlipTable | not-accessible | current | This table includes all the Flip events due to I/O Redundancy since last Clear command of this table. |
| 1.3.6.1.4.1.164.3.3.1.3.18.1 | RowsysSRdnFlipEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.1.3.18.1.1 | ColumnsysSRdnFlipIdx | read-only | current | Unique index number to identify an entry in the Redundancy Flip list. |
| 1.3.6.1.4.1.164.3.3.1.3.18.1.2 | ColumnsysSRdnFlipSlot | read-only | current | The slot number from which Flip was performed. |
| 1.3.6.1.4.1.164.3.3.1.3.18.1.3 | ColumnsysSRdnFlipPort | read-only | current | The port number from which Flip was performed. For DXC: For external ports the convention used will be: - first two digits will be: (IO slot number+10) - last … |
| 1.3.6.1.4.1.164.3.3.1.3.18.1.4 | ColumnsysSRdnFlipCause | read-only | current | The last cause that caused the Flip from the Slot (Port) of sysSRdnSlot, sysSRdnPort. |
| 1.3.6.1.4.1.164.3.3.1.3.18.1.5 | ColumnsysSRdnFlipDate | read-only | current | Flip event Date. The format will be the one selected by user for sysSDateFormat. |
| 1.3.6.1.4.1.164.3.3.1.3.18.1.6 | ColumnsysSRdnFlipTime | read-only | current | Flip event Time. The format will be hh:mm:ss. |
| 1.3.6.1.4.1.164.3.3.1.3.19 | ScalarsysSRdnFlipTableClearCmd | read-write | current | This command, when Set to 'on', clears the Redundancy Flip table (sysSRdnFlipTable). After clear is performed, the agent will turn the value to 'off' automatic… |
| 1.3.6.1.4.1.164.3.3.1.3.20 | ScalarsysSRdnFlipCmd | read-write | current | This object enables the user to send a command to the Agent, to Flip from a current Online IO card to its Redundant card. The value sent will be an Object Iden… |
| 1.3.6.1.4.1.164.3.3.1.3.21 | TablesysSBusTable | not-accessible | current | This table includes data and status about the internal DXC BUS. |
| 1.3.6.1.4.1.164.3.3.1.3.21.1 | RowsysSBusEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.1.3.21.1.1 | ColumnsysSBusPortIdx | read-only | current | The DXC BUS port number: - first two digits will be: (IO slot number+10) - last one/two digits will be the Bus port number, in odd numbers: port1 = 1 port2 = 3… |
| 1.3.6.1.4.1.164.3.3.1.3.21.1.2 | ColumnsysSBusStatus | read-only | current | The Status of sysSBusPortIdx. free - not used physical - captured by the port of the card physically installed virtual - captured virtually by another port. Ex… |
| 1.3.6.1.4.1.164.3.3.1.3.21.1.3 | ColumnsysSBusCapturePort | read-only | current | The Port that Captured the sysSBusPortIdx. - if sysSBusStatus=free, the value will be 'none'=0 - else, if sysSBusStatus=fixed, the value will be: sysSBusPortId… |
| 1.3.6.1.4.1.164.3.3.1.3.21.1.4 | ColumnsysSBusUtilization | read-only | current | Utilization of sysSBusPortIdx resources, in percent [%]. |
| 1.3.6.1.4.1.164.3.3.1.3.22 | TablesysSRdnCmdTable | not-accessible | current | This table includes commands used for IO Redundancy. |
| 1.3.6.1.4.1.164.3.3.1.3.22.1 | RowsysSRdnCmdEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.1.3.22.1.1 | ColumnsysSRdnEnforcedChannel | read-write | current | This is a command to override all switching considerations and enforce use of primary/ secondary connection only. noEnforcement - cancels the state of override… |
| 1.3.6.1.4.1.164.3.3.1.3.22.1.2 | ColumnsysSRdnLockFlip | read-write | current | This is a command to lock the Redundancy flip for this redundancy couple. Default = off(2). |
| 1.3.6.1.4.1.164.3.3.1.3.22.1.3 | ColumnsysSRdnManualFlip | read-write | current | This is a command to move to manual Redundancy flip mode for this redundancy couple. Default = off(2). |
| 1.3.6.1.4.1.164.3.3.1.3.23 | ScalarsysSAlrAttrIndication | read-only | current | This object indicates the status of the Alarm Attributes for the whole device. It is a sum of 2**(Bit-1). A Bit will be '1', when any alarm in the device is Fi… |
| 1.3.6.1.4.1.164.3.3.1.4 | NodesysCurrentAlr | |||
| 1.3.6.1.4.1.164.3.3.1.4.1 | TablesysSAlrTable | not-accessible | current | List of system level current existing alarms . |
| 1.3.6.1.4.1.164.3.3.1.4.1.1 | RowsysSAlrEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.1.4.1.1.1 | ColumnsysSAlrIdx | read-only | current | An index number of the current system alarms. |
| 1.3.6.1.4.1.164.3.3.1.4.1.1.2 | ColumnsysSAlrCode | read-only | current | This object indicates a code related to a specific alarm description. The list of codes and their related descriptions will be sent to NMS request (for display… |
| 1.3.6.1.4.1.164.3.3.1.4.1.1.3 | ColumnsysSAlrState | read-only | current | This object indicates the alarm Severity. |
| 1.3.6.1.4.1.164.3.3.1.4.1.1.4 | ColumnsysSAlarmMask | read-only | current | Alarm Mask is : on/off. |
| 1.3.6.1.4.1.164.3.3.1.4.1.1.5 | ColumnsysSAlarmInvert | read-only | current | Alarm Invert is : on/off. |
| 1.3.6.1.4.1.164.3.3.1.4.1.1.6 | ColumnsysSAlarmOnOff | read-only | current | Alarm state is : on/off. |
| 1.3.6.1.4.1.164.3.3.1.4.1.1.7 | ColumnsysSAlarmCounter | read-only | current | A counter - how many times the alarm occured (ON) since last clear operation or since last Reset. |
| 1.3.6.1.4.1.164.3.3.1.4.2 | ScalarsysSAlrClearCmd | read-write | current | Setting this attribute to ON, will enforce a clear operation on the system level alarms . Upon completion, the value will automatically change to off(2). |
| 1.3.6.1.4.1.164.3.3.1.4.3 | ScalarsysSAlrClearAllCmd | read-write | current | Setting this attribute to ON, will enforce a clear operation on all levels alarms . Upon completion, the value will automatically change to off(2). |
| 1.3.6.1.4.1.164.3.3.1.4.4 | ScalarsysSAlrMaskAll | read-write | current | on(3) - will cause masking of all the system level alarms. These alarms will not be sent to NMS and will not be taken into account for Alarms Status. off(2) - … |
| 1.3.6.1.4.1.164.3.3.1.4.5 | ScalarsysSAlrMask | read-write | current | This object is a mask that indicates which system level alarms are masked. The masked alarms (their bit is set to '1') are neither sent to the manager, nor tak… |
| 1.3.6.1.4.1.164.3.3.1.4.6 | ScalarsysSAlrDataUpdateCmd | read-write | current | on(3) - will cause Update of the Alarms Severity, Attributes and Report tables. off(2) - Upon completion, the value will automatically change to off(2). |
| 1.3.6.1.4.1.164.3.3.1.5 | NodesysBufferAlr | |||
| 1.3.6.1.4.1.164.3.3.1.5.1 | TablesysBufferAlrTable | not-accessible | current | List of current existing alarms (of all levels). |
| 1.3.6.1.4.1.164.3.3.1.5.1.1 | RowsysBufferAlrEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.1.5.1.1.1 | ColumnsysBufferAlrIdx | read-only | current | An index number of the current alarms. |
| 1.3.6.1.4.1.164.3.3.1.5.1.1.2 | ColumnsysBufferAlrCode | read-only | current | This object indicates a code related to a specific alarm description. The list of codes and thir related descriptions will be known by the NMS (for display pur… |
| 1.3.6.1.4.1.164.3.3.1.5.1.1.3 | ColumnsysBufferAlrState | read-only | current | This object indicates the alarm type. minor/major/warning/critical - indicates appearance of the problem and the type. event - indicates occurence of an event.… |
| 1.3.6.1.4.1.164.3.3.1.5.1.1.4 | ColumnsysBufferAlrSlot | read-only | current | The slot number this alarm refers to. When the alarm refers to a system function OR the DACS agent is a stand-alone unit, the value will be 'notApplicable(255)… |
| 1.3.6.1.4.1.164.3.3.1.5.1.1.5 | ColumnsysBufferAlrPort | read-only | current | The port number this alarm refers to. If the port number is irrelevant to this alarm (if it is a system/card level alarm) the value will be 9999. |
| 1.3.6.1.4.1.164.3.3.1.5.1.1.6 | ColumnsysBufferAlrDate | read-only | current | The date when the alarm occured. The format will be according to sysSDateFormat. |
| 1.3.6.1.4.1.164.3.3.1.5.1.1.7 | ColumnsysBufferAlrTime | read-only | current | The time when the alarm occured. |
| 1.3.6.1.4.1.164.3.3.1.5.1.1.8 | ColumnsysBufferAlrUpTime | read-only | current | The time when the alarm occured. This parameter holds the sysUpTime value when the alarm occured. |
| 1.3.6.1.4.1.164.3.3.1.5.1.1.9 | ColumnsysBufferAlrInfo | read-only | current | This parameter includes information about the alarm (additional to the Description). |
| 1.3.6.1.4.1.164.3.3.1.5.2 | ScalarsysBufferAlrClearCmd | read-write | current | Setting this attribute to ON, will enforce a clear operation on the Alarms Buffer. Upon completion, the value will automatically change to off(2). |
| 1.3.6.1.4.1.164.3.3.1.6 | NodesysConfig | |||
| 1.3.6.1.4.1.164.3.3.1.6.1 | TablesysCClkSrcTable | not-accessible | current | All the entries of this table are identical (have the same value) for all the configurations (1..255) except the TmpCnfg. For devices with more than one config… |
| 1.3.6.1.4.1.164.3.3.1.6.1.1 | RowsysCClkSrcEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.1.6.1.1.1 | ColumnsysCClkCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg being accessed ; Idx of 255 relates to the TmpCnfg. It can be also a combination of the configuration number and t… |
| 1.3.6.1.4.1.164.3.3.1.6.1.1.2 | ColumnsysCClkSrcIdx | read-only | current | An index in the table. There are only two entries in the table. master - refers Master clock parameters fallback - refers Fallback clock parameters |
| 1.3.6.1.4.1.164.3.3.1.6.1.1.3 | ColumnsysCClkSrcMode | read-write | current | This entry indicates the source the nodal timing is locked to. none - is an invalid option for Master clock. internal - is an invalid option for Fallback clock… |
| 1.3.6.1.4.1.164.3.3.1.6.1.1.4 | ColumnsysCClkSrcPrt | read-write | current | This entry is valid only when working in rxClk mode (for IPmux1000 this entry will be valid whe working in LBT mode). For ACE2002 in case of invalid entry the … |
| 1.3.6.1.4.1.164.3.3.1.6.1.1.5 | ColumnsysCClkStationFreq | read-write | current | This entry indicates the frequency of the station clock when the source is 'station'. The value will be applicable only when the sysCClkSrcMode is 'station'. |
| 1.3.6.1.4.1.164.3.3.1.6.1.1.6 | ColumnsysCClkRevertiveTimeout | read-write | current | The time in seconds in which the system will monitor the higher level clock source, before decision to revert to that clock. In case the time is zero, revertiv… |
| 1.3.6.1.4.1.164.3.3.1.6.1.1.7 | ColumnsysCClkStationIf | read-write | current | This entry indicates the electrical interface connected to the station clock, when the source is 'station'. The value will be applicable only when the sysCClkS… |
| 1.3.6.1.4.1.164.3.3.1.6.1.1.8 | ColumnsysCClkStationCableMode | read-write | current | This parameter indicates whether both Station clocks get their clock from the same source (Y Cable)or each one get its clock independently. The value will be a… |
| 1.3.6.1.4.1.164.3.3.1.6.1.1.9 | ColumnsysCClkStationOutState | read-write | current | This parameter indicates whether station clock can send its clock to another device. The value will be applicable only when the sysCClkSrcMode is 'station'. |
| 1.3.6.1.4.1.164.3.3.1.6.1.1.10 | ColumnsysCClkSsmBased | read-write | current | This parameter indicates whether clock source will be selected based on receive clock quality, indicated in S1 byte inside SONET/SDH overhead, (encoded as SSM … |
| 1.3.6.1.4.1.164.3.3.1.6.1.1.11 | ColumnsysCClkSSubsystemSlot | read-write | current | This entry indicates the Slot from which the S Subsytem Source will be taken. The value will be applicable only when the sysCClkSrcMode is 'sSubsystem'. |
| 1.3.6.1.4.1.164.3.3.1.6.1.1.12 | ColumnsysCClkRecoveredID | read-write | current | This entry indicates the Recovered Clock ID. The value will be applicable only when sysCClkSrcMode is 'recovered'. |
| 1.3.6.1.4.1.164.3.3.1.6.2 | TablesysCnfgTable | not-accessible | current | All the entries of this table are identical (have the same value) for all the configurations (1..255) except the TmpCnfg. The write operation into the Table Ob… |
| 1.3.6.1.4.1.164.3.3.1.6.2.1 | RowsysCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.1.6.2.1.1 | ColumnsysCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg. For Gmux2000 the range limitation (1..255) was discard… |
| 1.3.6.1.4.1.164.3.3.1.6.2.1.2 | ColumnsysCMatrixMode | read-write | current | Indicates the TS Matrix Mode: bidirectional - TS Assignment Matrix is symmetric. unidirectional - TS Assignment Matrix can be asymmetric. notApplicable - for a… |
| 1.3.6.1.4.1.164.3.3.1.6.2.1.3 | ColumnsysCIsdnFormat | read-write | current | ISDN format. This parameter controls the operation mode of the ISDN ports. te - ISDN timing is derived from the signal received from the equipment it is connec… |
| 1.3.6.1.4.1.164.3.3.1.6.2.1.4 | ColumnsysCRoutingOnEth | read-write | current | Mng Routing Protocol on the online CL Ethernet port, or on device Ethernet port dedicated for mangement. |
| 1.3.6.1.4.1.164.3.3.1.6.2.1.5 | ColumnsysCAutoConfigEnable | read-write | current | This object enables user to enable/disable activating the Auto Configuration. When Auto Configuration is activated, the device learns its configuration Automat… |
| 1.3.6.1.4.1.164.3.3.1.6.2.1.6 | ColumnsysCIntTsAllocMode | read-write | current | This object enables user to select the mode of Internal TS Allocation. static - user has to select for each Dynamic card port, the Maximum TSs expected to be c… |
| 1.3.6.1.4.1.164.3.3.1.6.2.1.7 | ColumnsysCBuPrimaryPort | read-write | current | This object enables the user to configure a Backup mechanism. If a backup mechanism exists, it is possible to configure the primary port. The traffic will flow… |
| 1.3.6.1.4.1.164.3.3.1.6.2.1.8 | ColumnsysCEnableLanOverTdm | read-write | current | This object enables/disables transferring traffic from the LAN port to the TDM port. It is possible to enable only part of the traffic on the TDM port for secu… |
| 1.3.6.1.4.1.164.3.3.1.6.2.1.9 | ColumnsysCSs7FisuSuppression | read-write | current | SS7 Suppresion is used for SS7 Spoofing. The SS7 spoofing terminates the keep alive messages from the local VMUX without sending them over the network, thus im… |
| 1.3.6.1.4.1.164.3.3.1.6.2.1.10 | ColumnsysCBuRecMode | read-write | current | Recovery Mode. This object determines if after recovery of the Primary Link (used in Vmux) it will become on-line again or not: auto - automatic. In this case,… |
| 1.3.6.1.4.1.164.3.3.1.6.3 | TablesysCRdnTable | not-accessible | current | Configuration of all Redundant I/O cards and ports. The write operation into the table objects is valid only for the TmpCnfg. A Slot/Port that have no Redundan… |
| 1.3.6.1.4.1.164.3.3.1.6.3.1 | RowsysCRdnEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.1 | ColumnsysCRdnCnfgIdx | read-only | current | This object indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.2 | ColumnsysCRdnPrimeSlot | read-only | current | The slot number of the Primary card of Redundancy. The Primary card should be the card that user wishes to be the online card (usually the more important one).… |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.3 | ColumnsysCRdnPrimePort | read-only | current | The port number. For DXC: For external ports the convention used will be: - first two digits will be: (IO slot number+10) - last one/two digits will be the por… |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.4 | ColumnsysCRdnSecSlot | read-create | current | The slot number of the Secondary card of Redundancy matching the Primary slot. |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.5 | ColumnsysCRdnSecPort | read-create | current | The port number. For DXC: For external ports the convention used will be: - first two digits will be: (IO slot number+10) - last one/two digits will be the por… |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.6 | ColumnsysCRdnMode | read-create | current | Redundancy Mode. DXC supports: yCable(3), singleSlotProtection(6) and dualCableParallelTx(4) MP supports: yCable(3), dualCableParallelTx(4), onePlusOne(7) and … |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.7 | ColumnsysCRdnRecMode | read-create | current | Recovery Mode. This object determines if after recovery of the failed Primary card/port it will become on-line again or not: auto - automatic . In this case, t… |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.8 | ColumnsysCRdnRecTime | read-create | current | Redundancy Recovery Time (sec). After switching to the current online card, the next switch can be performed only after a minimum time, indicated by this objec… |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.9 | ColumnsysCRdnHwSwFlip | read-create | current | HW or SW decision for Redundancy Flip. This object is applicable only for sysCRdnMode=singleSlotProtection. HW - decision is by I/O card SW - decision is by CL… |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.10 | ColumnsysCRdnRowStatus | read-create | current | This parameter allows NMS to create/delete entries of this table. The possible supported RowStatus values are active (1) and destroy (6). For Vmux-2100 the sup… |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.11 | ColumnsysCRdnOnline | read-only | current | Status - who is the Online (current) Redundancy Slot/Port. This object shows only the Online Slot/Port regarding the Redundancy. mdlSActivity or prtGenActiveSt… |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.12 | ColumnsysCRdnSwitchingMode | read-create | current | This object defines which Self Healing Ring (SHR) SDH ring is used: Uni Directional or BiDirectional. The type of the ring is defined according to the directio… |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.13 | ColumnsysCRdnFlipUponEvent | read-create | current | This object allows user to define if Flip to the other port will be performed (or not), for certain possible events. Each event is represented by a bit. The va… |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.14 | ColumnsysCRdnLosOrLofTime | read-create | current | This parameter determines how much time to wait before switching, after LOF or LOS are detected on the TDM Line. For Ipmux time is counted in msec. |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.15 | ColumnsysCRdnEventsTimeWindow | read-create | current | This parameter determines the time window in which to count events to trigger protection switching. For Ipmux time is counted in seconds. |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.16 | ColumnsysCRdnSequenceNumberThreshold | read-create | current | This parameter determines the number of Sequence Number errors that should occur in the time window in order to cause switching. |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.17 | ColumnsysCRdnBufferErrorsThreshold | read-create | current | This parameter determines the number of Buffer undeflow/ overflow events occured in the time window that cause switching. |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.18 | ColumnsysCRdnBuffUnderrunTime | read-create | current | This parameter determines how much time to wait before switching, after jitter buffer underrun. Switching occurs if no frame arrives within that time. For Ipmu… |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.19 | ColumnsysCRdnPrimePriority | read-create | current | The Primary port priority. In ETX2xx/2xxA: When selecting sysCRdnMode = manual (10), this parameter determines the forced active port: low - means that the sec… |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.20 | ColumnsysCRdnSecPriority | read-create | current | The Secondary port priority. |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.21 | ColumnsysCRdnWTR | read-create | current | Redundancy Wait to Restore (sec). Valid Values: 0..999, 65535. 65535=NA. When the value <> 65535, the value of sysCRdnRecTime must be 65535. |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.22 | ColumnsysCRdnName | read-create | current | A textual name for the redundancy group. |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.23 | ColumnsysCRdnTxDownDurationUponFlip | read-create | current | This object defines the duration (in seconds) the active port transmission is shut down after flip occurs. The transmission is shut down and then opened again … |
| 1.3.6.1.4.1.164.3.3.1.7 | NodesysDbase | |||
| 1.3.6.1.4.1.164.3.3.1.7.1 | ScalarsysDbaseSanityCheckCmd | read-write | current | Setting this attribute to on(3) will initiate the process of Sanity check on the TmpCnfg. Upon completion, the value will automatically change to off(2). |
| 1.3.6.1.4.1.164.3.3.1.7.2 | ScalarsysDbaseDownloadCnfgIdxCmd | read-write | current | This attribute specifies the Id of the target RealCnfg to which the TmpCnfg should be transferred. Upon set command, the DACS agent will initiate the Sanity-Ch… |
| 1.3.6.1.4.1.164.3.3.1.7.3 | ScalarsysDbaseUploadCnfgIdxCmd | read-write | current | This attribute specifies the Id of the source Cnfg to be loaded into the TmpCnfg. Upon set operation the actual transfer will be initiated. The operation is va… |
| 1.3.6.1.4.1.164.3.3.1.7.4 | TablesysDbaseFlipTable | not-accessible | current | Dbase Flip time and activation for every configuration. |
| 1.3.6.1.4.1.164.3.3.1.7.4.1 | RowsysDbaseFlipEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.1.7.4.1.1 | ColumnsysDbaseFlipIdx | read-only | current | This attribute indicates the Idx of the Cnfg being the target Configuration. |
| 1.3.6.1.4.1.164.3.3.1.7.4.1.2 | ColumnsysDbaseFlipTime | read-write | current | This attribute indicates the time (HH:MM) when this data base will start being used by the Tmp config. |
| 1.3.6.1.4.1.164.3.3.1.7.4.1.3 | ColumnsysDbaseFlipActivation | read-write | current | This attribute indicates if the Dbase flip will be activated at the time specified for this configuration (enable) or not (disable). No more than one flip shou… |
| 1.3.6.1.4.1.164.3.3.2 | NodemdlDacsMux | |||
| 1.3.6.1.4.1.164.3.3.2.1 | NodemdlGen | |||
| 1.3.6.1.4.1.164.3.3.2.1.1 | TablemdlSTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.3.2.1.1.1 | RowmdlSEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.2.1.1.1.1 | ColumnmdlSSltIdx | read-only | current | A unique number to identify a slot position in the DACS. The Kilomux should use enumerated values starting with kmx. For IPmux100 use values 1-13, 20. |
| 1.3.6.1.4.1.164.3.3.2.1.1.1.2 | ColumnmdlSCardType | read-only | current | This attribute indicates the type of the card installed in the specific slot position. Only PS's are possible in the PS slots. Only CL's are possible in the CL… |
| 1.3.6.1.4.1.164.3.3.2.1.1.1.3 | ColumnmdlSHwVer | read-only | current | This attribute indicates the Hardware version of the card installed in the specific slot position. |
| 1.3.6.1.4.1.164.3.3.2.1.1.1.4 | ColumnmdlSSwVer | read-only | current | This attribute indicates the Software version of the card installed in the specific slot position. |
| 1.3.6.1.4.1.164.3.3.2.1.1.1.5 | ColumnmdlSAlarmStatus | read-only | current | Indicates the current alarm state only for card level. This object will be set to: - critical(7): when there is at least one active (ON) critical alarm . - maj… |
| 1.3.6.1.4.1.164.3.3.2.1.1.1.6 | ColumnmdlSAlarmStatusAll | read-only | current | Indicates the current card alarm state including the lower level: card, port. This object will be set to: - critical(7): when there is at least one active (ON)… |
| 1.3.6.1.4.1.164.3.3.2.1.1.1.7 | ColumnmdlSTestStatus | read-only | current | This attribute will be on(3) when there is at least one test running on a port of the module; otherwise the value will be off(2). |
| 1.3.6.1.4.1.164.3.3.2.1.1.1.8 | ColumnmdlSHwStatus | read-only | current | This attribute will be fail(2) when a HW FAIL exists on this module (discovered by periodic self test); otherwise the value will be ok(3). |
| 1.3.6.1.4.1.164.3.3.2.1.1.1.9 | ColumnmdlSActivity | read-only | current | notApplicable - when the slot is empty (no module) offline(1) - when the module is not active (redundant) online (2) - when the module is active . |
| 1.3.6.1.4.1.164.3.3.2.1.1.1.10 | ColumnmdlSAlrClearCmd | read-write | current | Setting this attribute to ON, will enforce a clear operation on the card level alarms . Upon completion, the value will automatically change to off(2). |
| 1.3.6.1.4.1.164.3.3.2.1.1.1.11 | ColumnmdlSAlrClearAllCmd | read-write | current | Setting this attribute to ON, will enforce a clear operation on card and port level alarms . Upon completion, the value will automatically change to off(2). |
| 1.3.6.1.4.1.164.3.3.2.1.1.1.12 | ColumnmdlSAlrMaskAll | read-write | current | on(3) - will cause masking of all the card level alarms. These alarms will not be sent to NMS and will not be taken into account for Alarms Status. off(2) - wi… |
| 1.3.6.1.4.1.164.3.3.2.1.1.1.13 | ColumnmdlSCmd | read-write | current | General object for any special command at card level. 0=NotApplicable, for cards that don't support this object. For KML.10(ISDN) card of KM-2100, the object w… |
| 1.3.6.1.4.1.164.3.3.2.1.1.1.14 | ColumnmdlSReset | read-write | current | Reset action to be performed on the module. |
| 1.3.6.1.4.1.164.3.3.2.1.1.1.15 | ColumnmdlSRebuildFrame | read-write | current | Applicable only for KiloMux Main Link cards only. '2' = off, this will be always the Get value. '3' = on, this is the Set command used to Rebuild the Frame. Up… |
| 1.3.6.1.4.1.164.3.3.2.1.1.1.16 | ColumnmdlSBackupSwVer | read-only | current | This attribute indicates the Backup Software version of the card installed in the specific slot position. |
| 1.3.6.1.4.1.164.3.3.2.1.1.1.17 | ColumnmdlSSecondaryBackupSwVer | read-only | current | This attribute indicates the Secondary Backup Software version of the card installed in the specific slot position. |
| 1.3.6.1.4.1.164.3.3.2.1.1.1.18 | ColumnmdlSPiggybackVer | read-only | current | This attribute indicates the Piggyback version of the card installed in the specific slot position. |
| 1.3.6.1.4.1.164.3.3.2.1.2 | TablemdlCTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.3.2.1.2.1 | RowmdlCEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.2.1.2.1.1 | ColumnmdlCConfigIdx | read-only | current | This object indicates the Configuration number (1..255) referred. Value of 255 specifies the TmpCnfg (Scratch). |
| 1.3.6.1.4.1.164.3.3.2.1.2.1.2 | ColumnmdlCSlotIdx | read-only | current | This object indicates a unique number of the slot position in which the module is inserted. The Kilomux should use enumerated values starting with kmx. |
| 1.3.6.1.4.1.164.3.3.2.1.2.1.3 | ColumnmdlCProgCardType | read-write | current | This object indicates the card type assigned to the specific slot in the common configuration. This object is identical for all the configurations (1..255). On… |
| 1.3.6.1.4.1.164.3.3.2.1.2.1.4 | ColumnmdlCNoOfExtPrt | read-only | current | Number of external ports in the programmed module of the specific slot position |
| 1.3.6.1.4.1.164.3.3.2.1.2.1.5 | ColumnmdlCNoOfIntPrt | read-only | current | Number of internal ports in the programmed module of the specific slot position. |
| 1.3.6.1.4.1.164.3.3.2.1.2.1.6 | ColumnmdlCParam | read-write | current | General configuration object at card level (per configuration). NotApplicable=0, for cards that don't support this object. For D8U and D16U cards of DXC, the o… |
| 1.3.6.1.4.1.164.3.3.2.1.3 | NodemdlAlr | |||
| 1.3.6.1.4.1.164.3.3.2.1.3.1 | TablemdlAlrTable | not-accessible | current | The list of card alarms. |
| 1.3.6.1.4.1.164.3.3.2.1.3.1.1 | RowmdlAlrEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.2.1.3.1.1.1 | ColumnmdlAlrIdx | read-only | current | A unique number to identify an entry in the alarm status table. Users should use the get next function to read this table because the indexes are not consecuti… |
| 1.3.6.1.4.1.164.3.3.2.1.3.1.1.2 | ColumnmdlAlrSltIdx | read-only | current | This attribute indicates the desired slot position. The Kilomux should use enumerated values starting with kmx. |
| 1.3.6.1.4.1.164.3.3.2.1.3.1.1.3 | ColumnmdlAlrCode | read-only | current | This object indicates a code related to a specific alarm description. The list of codes and their related descriptions will be sent to NMS request (for display… |
| 1.3.6.1.4.1.164.3.3.2.1.3.1.1.4 | ColumnmdlAlrState | read-only | current | This object indicates the card alarm severity. |
| 1.3.6.1.4.1.164.3.3.2.1.3.1.1.5 | ColumnmdlAlarmMask | read-only | current | Alarm Mask is : on/off. |
| 1.3.6.1.4.1.164.3.3.2.1.3.1.1.6 | ColumnmdlAlarmInvert | read-only | current | Alarm Invert is : on/off. |
| 1.3.6.1.4.1.164.3.3.2.1.3.1.1.7 | ColumnmdlAlarmOnOff | read-only | current | Alarm state is : on/off. |
| 1.3.6.1.4.1.164.3.3.2.1.3.1.1.8 | ColumnmdlAlarmCounter | read-only | current | A counter - how many times the alarm occured (ON) since last clear operation or since last Reset. |
| 1.3.6.1.4.1.164.3.3.2.1.3.2 | TablemdlAlrMaskTable | not-accessible | current | The list of card masked alarms. |
| 1.3.6.1.4.1.164.3.3.2.1.3.2.1 | RowmdlAlrMaskEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.2.1.3.2.1.1 | ColumnmdlAlrMaskSltIdx | read-only | current | This attribute indicates the desired slot position. The Kilomux should use enumerated values starting with kmx. |
| 1.3.6.1.4.1.164.3.3.2.1.3.2.1.2 | ColumnmdlAlrMask | read-write | current | This object is a mask that indicates which card level alarms are masked. The masked alarms (their bit is set to '1') are neither sent to the manager, nor taken… |
| 1.3.6.1.4.1.164.3.3.2.2 | NodemdlCl | |||
| 1.3.6.1.4.1.164.3.3.2.2.1 | TablemdlClTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.3.2.2.1.1 | RowmdlClEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.2.2.1.1.1 | ColumnmdlClIdx | read-only | current | This object indicates the Cl slot referred. |
| 1.3.6.1.4.1.164.3.3.2.2.1.1.2 | ColumnmdlClSwchStatus | read-only | current | This object indicates the status of the switches on the referred DCL card. Each switch is represented by a bit. The status is a sum of 2**n, according to the b… |
| 1.3.6.1.4.1.164.3.3.2.2.1.1.3 | ColumnmdlClLastFlipDate | read-only | current | Date when last flip occured. The format would be as specified by the sysSDateFormat. |
| 1.3.6.1.4.1.164.3.3.2.2.1.1.4 | ColumnmdlClLastFlipTime | read-only | current | Time when last flip occured. |
| 1.3.6.1.4.1.164.3.3.2.2.1.1.5 | ColumnmdlClLastFlipCause | read-only | current | The cause of last flip. |
| 1.3.6.1.4.1.164.3.3.2.3 | NodemdlPs | |||
| 1.3.6.1.4.1.164.3.3.2.3.1 | TablemdlPsTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.3.2.3.1.1 | RowmdlPsEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.2.3.1.1.1 | ColumnmdlPsIdx | read-only | current | This object indicates the PS card referred. |
| 1.3.6.1.4.1.164.3.3.2.3.1.1.2 | ColumnmdlPsStatus | read-only | current | This object indicates the status of the PS card. |
| 1.3.6.1.4.1.164.3.3.2.3.1.1.3 | ColumnmdlPsTestResult | read-only | current | This object indicates the result of the PS card test. ok (1) - the test passed successfully. f12V (2) - 12V FAIL was detected f5V (3) - 5V FAIL was detected. |
| 1.3.6.1.4.1.164.3.3.3 | NodeprtDacsMux | |||
| 1.3.6.1.4.1.164.3.3.3.1 | NodeprtGen | |||
| 1.3.6.1.4.1.164.3.3.3.1.1 | TableprtGenParamTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.3.3.1.1.1 | RowprtGenEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.3.1.1.1.1 | ColumnprtGenPrtIdx | read-only | current | This attribute indicates a unique number to identify a port. The valid port number depends on the IO slot no., the installed card type and the port type: outsi… |
| 1.3.6.1.4.1.164.3.3.3.1.1.1.2 | ColumnprtGenSlt | read-only | current | This attribute indicates a unique number to identify the slot where the card is inserted in. When the unit is stand-alone, this object is not applicable and 25… |
| 1.3.6.1.4.1.164.3.3.3.1.1.1.3 | ColumnprtGenExtInt | read-only | current | This attribute describes the type of the designated port. Exteral port is a port with a physical connector. Internal port might be of two types, one is a compo… |
| 1.3.6.1.4.1.164.3.3.3.1.1.1.4 | ColumnprtGenIfIndex | read-only | current | This attribute indicates the unique interface number assigned to the port. The specific interface of this attribute is the same as the interface identified by … |
| 1.3.6.1.4.1.164.3.3.3.1.1.1.5 | ColumnprtGenActiveStatus | read-only | current | This attribute describes the activity status of the port. unknown(1) indicates that the information is not supported. notUsed(2) indicates that the port is not… |
| 1.3.6.1.4.1.164.3.3.3.1.1.1.6 | ColumnprtGenAlrStatus | read-only | current | Indicates the alarm state at port (ch) agent level. This object will be: - critical(7): when there is at least one active (ON) critical alarm . - major (3): wh… |
| 1.3.6.1.4.1.164.3.3.3.1.1.1.7 | ColumnprtGenTestStatus | read-only | current | This attribute will be on(3) when there is at least one test in progress (running) on the port; otherwise the value will be off(2). |
| 1.3.6.1.4.1.164.3.3.3.1.1.1.8 | ColumnprtGenTestMask | read-only | current | This is a mask which indicates which tests from the 'prtGenTestCmd' list are allowed for the selected port. If a specific test is allowed, its respective bit w… |
| 1.3.6.1.4.1.164.3.3.3.1.1.1.9 | ColumnprtGenTestCmd | read-write | current | Setting this object to a value as detailed furter on (except 0) will initiate a test on the specific port, if the operation is allowed (according to TestMask).… |
| 1.3.6.1.4.1.164.3.3.3.1.1.1.10 | ColumnprtGenTestRunning | read-only | current | This object indicates which tests are running currently on the selected port (initiated by user and/or by the system). If a specific test is currently running … |
| 1.3.6.1.4.1.164.3.3.3.1.1.1.11 | ColumnprtGenType | read-only | current | This object describes the type of the selected port. idsl - applicable for external ports of HS-U cards (of DXC) when interface is LT-1. |
| 1.3.6.1.4.1.164.3.3.3.1.1.1.12 | ColumnprtGenInterfaceType | read-only | current | This attribute indicates a unique HW interface type of the selected port. Examples: - for T1 cards: DSU, CSU - for E1 cards: DSU, LTU - for HS cards: v35, rs42… |
| 1.3.6.1.4.1.164.3.3.3.1.1.1.13 | ColumnprtGenAlrClearCmd | read-write | current | Setting this attribute to ON, will enforce a clear operation on the port level alarms . Upon completion, the value will automatically change to off(2). noOp - … |
| 1.3.6.1.4.1.164.3.3.3.1.1.1.14 | ColumnprtGenAlrMaskAll | read-write | current | on(3) - will mask all the alarms of the selected port off(2)- will unmask all alarms of the selected port except the ones selected by the prtAlrMaskTable. noOp… |
| 1.3.6.1.4.1.164.3.3.3.1.1.1.15 | ColumnprtGenParamStatus | read-only | current | This object indicates Status of parameters specific to the selected port. - For a port that has no special status or is supported by prtSExHsfStatTable - 1 Oct… |
| 1.3.6.1.4.1.164.3.3.3.1.1.1.16 | ColumnprtGenRdnStatus | read-only | current | This object indicates if this port is part of a redundant pair and in this case, if it is On or Off. none(1) - No redundancy or Not Applicable off (2) - the po… |
| 1.3.6.1.4.1.164.3.3.3.1.1.1.17 | ColumnprtGenTestMaskXP | read-only | current | This is an Expanded test mask of the prtGenTestMask object. The prtGenTestMask object reached its maximum, being an Integer with 31 bits. This object indicates… |
| 1.3.6.1.4.1.164.3.3.3.1.1.1.18 | ColumnprtGenTestCmdXP | read-write | current | This is an Expanded test command of the prtGenTestCmd object. The prtGenTestCmd object reached its maximum, being an Integer with 31 bits. Setting this object … |
| 1.3.6.1.4.1.164.3.3.3.1.1.1.19 | ColumnprtGenTestRunningXP | read-only | current | This is an Expanded object of the prtGenTestRunning object. The prtGenTestRunning object reached its maximum, being an Integer with 31 bits. This object indica… |
| 1.3.6.1.4.1.164.3.3.3.1.2 | TableprtGenTestDurationTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.3.3.1.2.1 | RowprtGenTestDurationEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.3.1.2.1.1 | ColumnprtGenTestPrtIdx | read-only | current | This attribute indicates a unique number to identify a port. The valid port number depends on the IO slot no., the installed card type and the port type: outsi… |
| 1.3.6.1.4.1.164.3.3.3.1.2.1.2 | ColumnprtGenTestIdx | read-only | current | This attribute indicates the test, the duration refers. |
| 1.3.6.1.4.1.164.3.3.3.1.2.1.3 | ColumnprtGenTestDuration | read-write | current | This attribute indicates the maximum duration of executing a test on the specific port. This entry applies to the specified test . The resolution will be a min… |
| 1.3.6.1.4.1.164.3.3.3.1.3 | TableprtGenTsTable | not-accessible | current | The write operation into the Table's Objects is valid only for the TmpCnfg entry (Scratch),exept some products which enable direct writing to the ActiveCnfg. T… |
| 1.3.6.1.4.1.164.3.3.3.1.3.1 | RowprtGenTsEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.3.1.3.1.1 | ColumnprtGenTsCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg(1..255) being accessed. Idx of 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.3.3.1.3.1.2 | ColumnprtGenTsPrtIdx | read-only | current | This attribute indicates a unique port number. The valid port number depends on the IO slot no., the installed card type and the port type: outside, inside, SP… |
| 1.3.6.1.4.1.164.3.3.3.1.3.1.3 | ColumnprtGenTsIdx | read-only | current | This attribute indicates a unique time slot position. The valid time slots are 1..25 for T1 Card (25=Fbit) 0..31 for E1 or HS Card . In G732S-E1 lines time slo… |
| 1.3.6.1.4.1.164.3.3.3.1.3.1.4 | ColumnprtGenTsType | read-write | current | The type of Timeslot. If the source or destination port is an HS port,'TS Type' must be 'data'. nc - means that this TimeSlot is not connected. voice, data, vc… |
| 1.3.6.1.4.1.164.3.3.3.1.3.1.5 | ColumnprtGenTsIConPrt | read-write | current | This attribute indicates the internally (In Mux) connected port. The valid port number depends on the IO slot no., the installed card type and the port type: o… |
| 1.3.6.1.4.1.164.3.3.3.1.3.1.6 | ColumnprtGenTsIConTs | read-write | current | This attribute indicates a unique time slot position. The valid time slots are 1..25 for T1 Card (25=Fbit) 0..31 for E1 (or HS) Card. In G732S-E1 lines time sl… |
| 1.3.6.1.4.1.164.3.3.3.1.4 | NodeprtAlr | |||
| 1.3.6.1.4.1.164.3.3.3.1.4.1 | TableprtSAlarmTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.3.3.1.4.1.1 | RowprtSAlarmEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.3.1.4.1.1.1 | ColumnprtSAlarmIdx | read-only | current | A unique number to identify an entry in the alarm status table. Users should use the get next function to read this table because the indexes are not consecuti… |
| 1.3.6.1.4.1.164.3.3.3.1.4.1.1.2 | ColumnprtSAlarmPrtIdx | read-only | current | This attribute indicates a unique number to identify a port. The valid port number depends on the IO slot no., the installed card type and the port type: outsi… |
| 1.3.6.1.4.1.164.3.3.3.1.4.1.1.3 | ColumnprtSAlarmCode | read-only | current | This object indicates a code related to a specific alarm description. The list of codes and their related descriptions will be sent to NMS request (for display… |
| 1.3.6.1.4.1.164.3.3.3.1.4.1.1.4 | ColumnprtSAlarmState | read-only | current | This object indicates the port alarm severity. |
| 1.3.6.1.4.1.164.3.3.3.1.4.1.1.5 | ColumnprtSAlarmMask | read-only | current | Alarm Mask is : on/off. |
| 1.3.6.1.4.1.164.3.3.3.1.4.1.1.6 | ColumnprtSAlarmInvert | read-only | current | Alarm Invert is : on/off. |
| 1.3.6.1.4.1.164.3.3.3.1.4.1.1.7 | ColumnprtSAlarmOnOff | read-only | current | Alarm state is : on/off. |
| 1.3.6.1.4.1.164.3.3.3.1.4.1.1.8 | ColumnprtSAlarmCounter | read-only | current | A counter - how many times the alarm occured (ON) since last clear operation or since last Reset. |
| 1.3.6.1.4.1.164.3.3.3.1.4.2 | TableprtAlrMaskTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.3.3.1.4.2.1 | RowprtAlrMaskEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.3.1.4.2.1.1 | ColumnprtAlrMaskPrtIdx | read-only | current | This attribute indicates a unique number to identify a port. The valid port number depends on the IO slot no., the installed card type and the port type: outsi… |
| 1.3.6.1.4.1.164.3.3.3.1.4.2.1.2 | ColumnprtAlrMask | read-write | current | This object is a mask that indicates which port level alarms are masked. The masked alarms (their bit is set to '1') are neither sent to the manager, nor taken… |
| 1.3.6.1.4.1.164.3.3.3.1.5 | TableprtBertTable | not-accessible | current | This table includes the BERT parameters, counters and commands. The configurable parameters: - prtBertPattern - prtBertInjectRate - prtBertTs are not Set per c… |
| 1.3.6.1.4.1.164.3.3.3.1.5.1 | RowprtBertEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.3.1.5.1.1 | ColumnprtBertPrtIdx | read-only | current | This attribute indicates a unique number to identify a port. The valid port number depends on the IO slot no., the installed card type and the port type: outsi… |
| 1.3.6.1.4.1.164.3.3.3.1.5.1.2 | ColumnprtBertPattern | read-write | current | This object indicates the pattern of the BERT. p2Exxm1 = 2Exx-1. pxx = pattern xx. This object is the same for all configurations. notApplicable - when this ob… |
| 1.3.6.1.4.1.164.3.3.3.1.5.1.3 | ColumnprtBertInjectRate | read-write | current | This object indicates the error rate injection of the BERT. r10Emx = 10E-x This object is the same for all configurations. single - single error injection. not… |
| 1.3.6.1.4.1.164.3.3.3.1.5.1.4 | ColumnprtBertInjectErrRateCmd | read-write | current | This object controls activation/deactivation of the Error Rate Injection during BERT. |
| 1.3.6.1.4.1.164.3.3.3.1.5.1.5 | ColumnprtBertInjectSingleErrCmd | read-write | current | This object enables to initiate a Single Error Injection during BERT (on). Upon completion, the value will automatically change to off(2). |
| 1.3.6.1.4.1.164.3.3.3.1.5.1.6 | ColumnprtBertRunTime | read-only | current | This object indicates how much time (seconds) passed since BERT started to run. |
| 1.3.6.1.4.1.164.3.3.3.1.5.1.7 | ColumnprtBertESs | read-only | current | How many Errored Seconds were detected since BERT started to run. Counter for Kmux and MP. |
| 1.3.6.1.4.1.164.3.3.3.1.5.1.8 | ColumnprtBertSyncLoss | read-only | current | How many times Sync Loss was detected since BERT started to run. For some products: number of seconds in which Sync Loss occured since BERT started to run. See… |
| 1.3.6.1.4.1.164.3.3.3.1.5.1.9 | ColumnprtBertErrorBits | read-only | current | How many Error Bits were detected since BERT started to run. |
| 1.3.6.1.4.1.164.3.3.3.1.5.1.10 | ColumnprtBertClearCounters | read-write | current | Setting this object to ON, will enforce a clear operation of some BERT Counters. Upon completion, the value will automatically change to off(2). |
| 1.3.6.1.4.1.164.3.3.3.1.5.1.11 | ColumnprtBertSyncStatus | read-only | current | Sync Status while BERT runs. |
| 1.3.6.1.4.1.164.3.3.3.1.5.1.12 | ColumnprtBertTs | read-write | current | This object indicates on which TSs of the selected port, BERT should be applied. Each Bit of the Octet represents a TS: 31 ......0 MSB LSB Bit 0 will not be us… |
| 1.3.6.1.4.1.164.3.3.3.1.5.1.13 | ColumnprtBertResult | read-only | current | This object indicates Result of BERT for the selected port (number of error bits divided to the total number of data bits.) Applicable only if BERT is running … |
| 1.3.6.1.4.1.164.3.3.3.1.5.1.14 | ColumnprtBertTxBits | read-only | current | How many data bits were transmitted since BERT started to run, or since last counter clear (prtBertClearCounters set to on). |
| 1.3.6.1.4.1.164.3.3.3.1.5.1.15 | ColumnprtBertRxBits | read-only | current | How many data bits were Received since BERT started to run, or since last counter clear (prtBertClearCounters set to on). |
| 1.3.6.1.4.1.164.3.3.3.1.5.1.16 | ColumnprtBertTxErrorBits | read-only | current | Number of injected error bits since BERT started to run, or since last counter clear (prtBertClearCounters set to on). |
| 1.3.6.1.4.1.164.3.3.3.1.6 | TableprtMonTable | not-accessible | current | For DXC, the write operation into the Table's Objects is valid only for the TmpCnfg entry (Scratch). |
| 1.3.6.1.4.1.164.3.3.3.1.6.1 | RowprtMonEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.3.1.6.1.1 | ColumnprtMonCnfgIdx | read-only | current | This object indicates the Idx of the Cnfg(1..255) being accessed. Idx of 255 relates to the TmpCnfg. For products that do not support configurations, 1 will be… |
| 1.3.6.1.4.1.164.3.3.3.1.6.1.2 | ColumnprtMonitoringIdx | read-only | current | This object indicates the Monitoring Port Index. For DXC: The valid port number depends on the IO slot no., the installed card type and the port type: external… |
| 1.3.6.1.4.1.164.3.3.3.1.6.1.3 | ColumnprtMonitoringEnable | read-write | current | This object indicates if the prtMonitoringIdx is configured as a monitoring port or not. disabled = the port is NOT configured to monitor. Setting this object … |
| 1.3.6.1.4.1.164.3.3.3.1.6.1.4 | ColumnprtMonitoringTSs | read-write | current | This object indicates which TSs of the Monitoring port, the test equipment should monitor. Each Bit of the Octet represents a TS: 31 ......0 MSB LSB Bit 0 will… |
| 1.3.6.1.4.1.164.3.3.3.1.6.1.5 | ColumnprtMonitoredPort | read-write | current | This object indicates the MONITORED Port Index that the Monitoring port monitors. For DXC: The valid port number depends on the IO slot no., the installed card… |
| 1.3.6.1.4.1.164.3.3.3.1.6.1.6 | ColumnprtMonitoredTSs | read-write | current | This object indicates which TSs of the Monitored port, should be monitored. Each Bit of the Octet represents a TS: 31 ......0 MSB LSB Bit 0 will not be used. I… |
| 1.3.6.1.4.1.164.3.3.3.1.7 | NodeprtCfgParam | |||
| 1.3.6.1.4.1.164.3.3.3.1.7.1 | TableprtCfgParamTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. KMUX parameters are for the cards: KMBE/New, KVF.6 family. |
| 1.3.6.1.4.1.164.3.3.3.1.7.1.1 | RowprtCfgParamEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.3.1.7.1.1.1 | ColumnprtCfgParamCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.3.3.1.7.1.1.2 | ColumnprtCfgParamIdx | read-only | current | A unique identifier of the port (within the card when applicable). - For KM-2100: Slot*100+Ch external ports: Ch=1..10 internal ports (sub-channels): Ch=11..20… |
| 1.3.6.1.4.1.164.3.3.3.1.7.1.1.3 | ColumnprtCfgParamSlt | read-only | current | This attribute indicates a unique number to identify the slot where the card is inserted in. In the 2104 Unit the entries kmxIO5(111)..kmxIO12(118) are not val… |
| 1.3.6.1.4.1.164.3.3.3.1.7.1.1.4 | ColumnprtCfgParamOperatedMl | read-write | current | The main link for this channel. The field is relevant only for ML modes of Dual, Priority Bumping and Switched Backup. |
| 1.3.6.1.4.1.164.3.3.3.1.7.1.1.5 | ColumnprtCfgParamMlAtoMlBPrio | read-write | current | ML-A to ML-B Priority. The field is relevant only for ML modes of Priority Bumping and Switched Backup. |
| 1.3.6.1.4.1.164.3.3.3.1.7.1.1.6 | ColumnprtCfgParamMlBtoMlAPrio | read-write | current | ML-B to ML-A Priority. The field is relevant only for ML modes of Priority Bumping. |
| 1.3.6.1.4.1.164.3.3.3.1.7.1.1.7 | ColumnprtCfgParamInbandLoopDetection | read-write | current | Inband Loop Detection. The field is relevant for FCD-T1/E1(L) ports. |
| 1.3.6.1.4.1.164.3.3.3.1.7.1.1.8 | ColumnprtCfgParamInbandLoopPatternCfg | read-write | current | This object indicates if Inband Loop polynomial pattern will be according to RDL Loop (the standard) or User Configurated according to prtCfgParamInbandLoopAct… |
| 1.3.6.1.4.1.164.3.3.3.1.7.1.1.9 | ColumnprtCfgParamInbandLoopActPattern | read-write | current | This object is a binary string of up to 8 bits. Though the syntax allows for any ASCII characters, for this object only '0' or '1' characters are valid. The st… |
| 1.3.6.1.4.1.164.3.3.3.1.7.1.1.10 | ColumnprtCfgParamInbandLoopDeactPattern | read-write | current | This object is a binary string of up to 8 bits. Though the syntax allows for any ASCII characters, for this object only '0' or '1' characters are valid. The st… |
| 1.3.6.1.4.1.164.3.3.3.2 | NodeprtT1E1 | |||
| 1.3.6.1.4.1.164.3.3.3.2.1 | TableprtT1E1StatTable | not-accessible | current | T1/E1 port statistics table. |
| 1.3.6.1.4.1.164.3.3.3.2.1.1 | RowprtT1E1StatEntry | not-accessible | current | An entry in the T1/E1 port statistics table. |
| 1.3.6.1.4.1.164.3.3.3.2.1.1.1 | ColumnprtT1E1SPrtIdx | read-only | current | This attribute indicates a unique port number. The same numbering as for prtGenPrtIdx. The valid port number depends on the IO slot no., the installed card typ… |
| 1.3.6.1.4.1.164.3.3.3.2.1.1.2 | ColumnprtT1E1SSlt | read-only | current | This attribute indicates a unique number to identify the slot where the card is inserted in. When the unit is stand-alone, this object is not applicable and 25… |
| 1.3.6.1.4.1.164.3.3.3.2.1.1.3 | ColumnprtT1E1OosCount | read-only | current | This object is applicable only for an E1 active port. It provides the number of red alarm events since the last count clearing. |
| 1.3.6.1.4.1.164.3.3.3.2.1.1.4 | ColumnprtT1E1BpvLastMin | read-only | current | This object is applicable only for an E1 active port. It provides the number of BPV (BiPolar Violation) events detected during the last minute. |
| 1.3.6.1.4.1.164.3.3.3.2.1.1.5 | ColumnprtT1E1BpvMax | read-only | current | This object is applicable only for an E1 active port. It provides the maximal number of BPV (BiPolar Violation) events (per minute), detected during the worst … |
| 1.3.6.1.4.1.164.3.3.3.2.2 | TableprtT1E1CnfgTable | not-accessible | current | T1/E1 port configuration table. |
| 1.3.6.1.4.1.164.3.3.3.2.2.1 | RowprtT1E1CnfgEntry | not-accessible | current | An entry in the T1/E1 port configuration table. |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.1 | ColumnprtT1E1CnfgIdx | read-only | current | This attribute indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.2 | ColumnprtT1E1PrtIdx | read-only | current | This attribute indicates a unique port number. The same numbering as for prtGenPrtIdx. The valid port number depends on the IO slot no., the installed card typ… |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.3 | ColumnprtT1E1Slt | read-only | current | This attribute indicates a unique number to identify the slot where the card is inserted in. When the unit is stand-alone, this object is not applicable and 25… |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.4 | ColumnprtT1E1LineType | read-write | current | This variable indicates the variety of T1/E1 Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can rea… |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.5 | ColumnprtT1E1LineCode | read-write | current | This variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its characteristics. jbzs=b7zs refers the Jamm… |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.6 | ColumnprtT1E1SignalMode | read-write | current | 'none' indicates that no bits are reserved for signaling on this channel. 'robbedBit' indicates that T1 Robbed Bit Signaling is in use. 'bitOriented' indicates… |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.7 | ColumnprtT1E1Fdl | read-write | current | This bitmap describes the use of the facili- ties data link, and is the sum of the capabili- ties: 'other' indicates that a protocol other than one following i… |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.8 | ColumnprtT1E1FdlMode | read-write | current | Fdl Mode of the T1 selected port. notApplicable - will be used for an E1 port. |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.9 | ColumnprtT1E1Sync | read-write | current | This object enables returning to normal operation, after the end of a main/sub link red alarm event, in reduced time. 'tr62411' - complies with AT&T TR-62411 (… |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.10 | ColumnprtT1E1CGA | read-write | current | This object selects the method used to signal the CGA state to the other end, through the main/sub link. 'none' - non-transparent mode. When one of the links (… |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.11 | ColumnprtT1E1IdleCode | read-write | current | This object selects the code transmitted to fill idle (unused) time slots in the main link frame. Valid range: (0 - FF HEX) . |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.12 | ColumnprtT1E1OosSignal | read-write | current | 'idle' = '0' = on-hook, idle state 'busy' = '1' = off-hook, busy state 'forcedIdle' = SP = both A and B signaling bits are forced to '0' during out-of-service … |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.13 | ColumnprtT1E1VoiceOos | read-write | current | Voice Out-Of-Service code. Valid range: (0 - FF HEX). For agents that do not support this feature, the value will always be 0. |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.14 | ColumnprtT1E1DataOos | read-write | current | Data Out-Of-Service code. Valid range: (0 - FF HEX). For agents that do not support this feature, the value will always be 0. |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.15 | ColumnprtT1E1LineLengthMask | read-write | current | This attribute is the line length mask parameter used only for T1/DSU interfaces. len400p533ft=length range: 400ft to 533ft 'fcc68' - provides compliance with … |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.16 | ColumnprtT1E1TxGainMask | read-write | current | This attribute is the tx gain mask parameter (dB), used only for T1/CSU interfaces. |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.17 | ColumnprtT1E1InbandMng | read-write | current | A unique number to identify an Inband management over the link. internal - supported by KM-2100 only. It means that the management is internal to the frame. It… |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.18 | ColumnprtT1E1InbandMngRate | read-write | current | A unique number to identify the rate of the Inband management. It is required only for E1 links and is applicable only when prtExT1E1InbandMng selected is FdlO… |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.19 | ColumnprtT1E1DedicatedTs | read-write | current | The value is differently determined for different products. There are two methods: 1) A unique number to identify Dedicated TS of the T1/E1 port. It is applica… |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.20 | ColumnprtT1E1InbandMngRoutProt | read-write | current | Inband Mng Routing Protocol of the port. When prtT1E1InbandMng is 'dedicatedPpp'-'proprietary' and 'rip2' are applicable. For other values - only 'proprietary'… |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.21 | ColumnprtT1E1LinkMode | read-write | current | regular - TSs are connected by user via TS Assignment only transparent - when a port with this Link Mode is connected to an internal T1/E1 port of a T3/E3 card… |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.22 | ColumnprtT1E1Multiplier | read-write | current | The data rate of each TS. The multiplier values can be 56 kbps or 64 kbps. For T1 only. |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.23 | ColumnprtT1E1RxGain | read-write | current | This attribute is the rx volume (dB). |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.24 | ColumnprtT1E1RAI | read-write | current | Remote Alarm Signal |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.25 | ColumnprtT1E1LineMode | read-write | current | Interface type of the port. For T1 - csu, dsu are the valid values For E1 - dsu, ltu are the valid values |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.26 | ColumnprtT1E1TS0SaBits | read-write | current | This object is applicable only for E1 ports. For T1, string size will be 0. For E1, it enables user to select the use of TS0 Sa Bits 4..8, by 3 octets: The ord… |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.27 | ColumnprtT1E1ConnectedTS | read-only | current | This parameter indicates if there is any connected TS for this interface. |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.28 | ColumnprtT1E1Ts0SaBit | read-write | current | This parameter indicates whether to send TS 0, or not. noMng= TS 0 is looped, therefore not sent. mng= TS 0 isn't looped, therefore it is sent. |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.29 | ColumnprtT1E1SameFeCnfg | read-write | current | This parameter indicates whether the same E1 configuration parameters and TS assignment are set both to the local and remote device. Read-Write access is appli… |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.30 | ColumnprtT1E1RemCrc4 | read-write | current | This object indicates whether the E1 of the Remote device connected to this E1 port, will have CRC-4 or not. |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.31 | ColumnprtT1E1MaxTSs | read-write | current | This object is applicable only for DXC D4T1, D4E1, D8T1, D8E1 external ports and D8GSL internal E1 ports. It is relevant only when sysCIntTsAllocMode=static(2)… |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.32 | ColumnprtT1E1EocTsConfig | read-write | current | This object indicates whether the use of EOC for TS Configuration is enabled or not. |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.33 | ColumnprtT1E1Role | read-write | current | This object indicates whether this port behaves as SUB or Main link. |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.34 | ColumnprtT1E1PppEchoFailDetection | read-write | current | This object indicates whether the PPP Echo is taken into account for its Fail Detection. This object is relevant when Inband Mng between devices is Dedicated T… |
| 1.3.6.1.4.1.164.3.3.3.2.3 | TableprtT1E1FdlMsgTable | not-accessible | current | This table is applicable for a T1 interface with 'esf' LineType or E1 interface, when CRC is enabled (LineType). |
| 1.3.6.1.4.1.164.3.3.3.2.3.1 | RowprtT1E1FdlMsgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.3.2.3.1.1 | ColumnprtT1E1FdlMsgPrtIdx | read-only | current | This attribute indicates a unique port number. The same numbering as for prtGenPrtIdx. The valid port number depends on the IO slot no., the installed card typ… |
| 1.3.6.1.4.1.164.3.3.3.2.3.1.2 | ColumnprtT1E1FdlMsgFdlType | read-only | current | The Fdl type reference of the Fdl message. |
| 1.3.6.1.4.1.164.3.3.3.2.3.1.3 | ColumnprtT1E1FdlMsgSlt | read-only | current | This attribute indicates a unique number to identify the slot where the card is inserted in. When the unit is stand-alone, this object is not applicable and 25… |
| 1.3.6.1.4.1.164.3.3.3.2.3.1.4 | ColumnprtT1E1FdlMsg | read-only | current | FDL message. |
| 1.3.6.1.4.1.164.3.3.3.3 | NodeprtHS | |||
| 1.3.6.1.4.1.164.3.3.3.3.1 | TableprtHSParamTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.3.3.3.1.1 | RowprtHSParamEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.1 | ColumnprtHSCnfgIdx | read-only | current | This attribute indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.2 | ColumnprtHSPrtIdx | read-only | current | This attribute indicates a unique number to identify a port. The valid port number depends on the IO slot no., the installed card type and the port type: outsi… |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.3 | ColumnprtHSSlt | read-only | current | This attribute indicates a unique number to identify the slot where the card is inserted in. When the unit is stand-alone, this object is not applicable and 25… |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.4 | ColumnprtHSRate | read-write | current | This object indicates the port rate (speed). auto - rate is selected automatically by system. |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.5 | ColumnprtHSFifoSize | read-write | current | This object selects the size of the user data channel buffer FIFO used in the DTE2 mode. In the other modes, buffer size is automatically set by the DACS agent… |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.6 | ColumnprtHSClkMode | read-write | current | Clock Mode of the user data channel. dce - DACS operates as a DCE and provides transmit and receive clocks to the synchronous user DTE. dte1- DACS supplies the… |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.7 | ColumnprtHSCTS | read-write | current | Selection of CTS line state in the user data channel. on - CTS continuously ON. rts - CTS line follows the RTS line. |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.8 | ColumnprtHSRtsState | read-only | current | RTS state of the port. |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.9 | ColumnprtHSInbandLoopback | read-write | current | This object indicates if Inband Loopback from the Network should be enabled or disabled. |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.10 | ColumnprtHSInbandLoopPatternCfg | read-write | current | This object indicates if Inband Loop polynomial pattern will be according to RDL Loop (the standard) or User Configurated according to prtHSActivatePolyPattern… |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.11 | ColumnprtHSInbandLoopActPattern | read-write | current | This object is a binary string of up to 8 bits. Though the syntax allows for any ASCII characters, for this object only '0' or '1' characters are valid. The st… |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.12 | ColumnprtHSInbandLoopDeactPattern | read-write | current | This object is a binary string of up to 8 bits. Though the syntax allows for any ASCII characters, for this object only '0' or '1' characters are valid. The st… |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.13 | ColumnprtHSDCD | read-write | current | Selection of DCD line state in the user data channel. linkOK - DCD line is ON only when active link is OK. on - DCD continuously ON. |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.14 | ColumnprtHSClkPolarity | read-write | current | This object indicates the clock polarity. |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.15 | ColumnprtHSInterfaceType | read-write | current | This object indicates the selected electrical interface type. |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.16 | ColumnprtHSUnframed | read-write | current | Unframed line for HS ports. yes - means that all TSs must be transferred, including TS0. In this case, prtHSRate must be r31x56eq1736Kbps OR r31x64eq1984Kbps. |
| 1.3.6.1.4.1.164.3.3.3.3.2 | TableprtHSBertTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.3.3.3.2.1 | RowprtHSBertEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.3.3.2.1.1 | ColumnprtHSBertPrtIdx | read-only | current | This attribute indicates a unique number to identify a port. The valid port number depends on the IO slot no., the installed card type and the port type: outsi… |
| 1.3.6.1.4.1.164.3.3.3.3.2.1.2 | ColumnprtHSBertSlt | read-only | current | This attribute indicates a unique number to identify the slot where the card is inserted in. When the unit is stand-alone, this object is not applicable and 25… |
| 1.3.6.1.4.1.164.3.3.3.3.2.1.3 | ColumnprtHSBertCountClr | read-write | current | Setting this object (to on) initiate bert counter clear operation. Valid only when bert test is active on the specific port. (Every time a new bert test starts… |
| 1.3.6.1.4.1.164.3.3.3.3.2.1.4 | ColumnprtHSBertTestResult | read-only | current | This object indicates the number of Bit Error Rate indicated during the BERT test. Active only when bert test is running on the selected port. |
| 1.3.6.1.4.1.164.3.3.3.4 | NodeprtSP | |||
| 1.3.6.1.4.1.164.3.3.3.4.1 | TableprtSpCnfgTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.3.3.4.1.1 | RowprtSpCnfgEntry | not-accessible | current | All the entries at this table are identical(have the same value) at all the configurations(1..255) except at the TmpCnfg. - For products supporting more than o… |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.1 | ColumnprtSpCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg(1..255) being accessed. Idx of 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.2 | ColumnprtSpPrtIdx | read-only | current | This attribute indicates a unique port number of the SPor DP port. For DXC, it is the port in the active DCL card: - SP = 1 - NP ; DP = 2 For Kilomux, the port… |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.3 | ColumnprtSpUsage | read-write | current | This attribute indicates what is the usage of the port. |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.4 | ColumnprtSpRate | read-write | current | This attribute indicates the operation rate (speed) of the port. auto - automatic rate selection, by the agent. |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.5 | ColumnprtSpDataBits | read-write | current | This attribute indicates the number of data bits in async frame |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.6 | ColumnprtSpParity | read-write | current | This attribute indicates the parity mode in async frame |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.7 | ColumnprtSpCallOutMode | read-write | current | This attribute indicates the call-out mode. For DXC - this object is applicable only for the DP port (2). |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.8 | ColumnprtSpInterface | read-write | current | This attribute indicates the supervisory port interface. dce - the DACS appears as a DCE for the port. dte - the DACS operates as a DTE, for connection via mod… |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.9 | ColumnprtSpCTS | read-write | current | CTS line state. This object is applicable only for port (1) = SP |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.10 | ColumnprtSpDcdDelay | read-write | current | DCD delay in msec. d10 = delay of 10msec. This object is applicable only for port (1) = SP |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.11 | ColumnprtSpDsr | read-write | current | DSR line state. This object is applicable only for port (1) = SP |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.12 | ColumnprtSpNoOfRetries | read-write | current | For DXC - this object is applicable only for port (2) = DP. The number of dialing retries requested. Default = 0 |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.13 | ColumnprtSpWaitForConnect | read-write | current | For DXC - this object is applicable only for port (2) = DP. Waiting time for connect, in seconds. Default = 30 sec. |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.14 | ColumnprtSpDialMode | read-write | current | For DXC - this object is applicable only for port (2) = DP. Dialing mode. Default=tone |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.15 | ColumnprtSpAltNumMode | read-write | current | For DXC - this object is applicable only for port (2) = DP. It determines wether to use the alternate number or not. Default = no. |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.16 | ColumnprtSpPrimaryNum | read-write | current | For DXC - this object is applicable only for port (2) = DP. It is the Primary dialing number. |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.17 | ColumnprtSpAltNum | read-write | current | For DXC - this object is applicable only for port (2) = DP. It is the Alternate dialing number. This number is applicable only if prtSpAltNumMode is 'yes'. |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.18 | ColumnprtSpRoutProtocol | read-write | current | This attribute indicates the routing protocol of the port. notApplicable - for DP. |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.19 | ColumnprtSpCmd | read-write | current | SP Command. For LRS this parameter will be used for a Modem Command. Upon NMS's Get operation for devices that this parameter is notApplicable, agent will send… |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.20 | ColumnprtSpActCallOut | read-write | current | This object indicates when to Activate Call-Out. It is used by FCD-T1/E1. always - to activate call-out always. linkFail - to activate call-out only when Link … |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.21 | ColumnprtSpAlrRelayMode | read-write | current | This attribute indicates the Alarm Relay Mode. notApplicable - for DP. |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.22 | ColumnprtSpStopBits | read-write | current | This attribute indicates number of stop bits in an async frame. |
| 1.3.6.1.4.1.164.3.3.3.5 | NodeprtDim | |||
| 1.3.6.1.4.1.164.3.3.3.5.1 | TableprtDimCnfgTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.3.3.5.1.1 | RowprtDimCnfgEntry | not-accessible | current | The write operation into the Table Objects is valid only for the TmpCnfg entry (prtDimCnfgIdx=255). |
| 1.3.6.1.4.1.164.3.3.3.5.1.1.1 | ColumnprtDimCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg(1..255) being accessed. Idx of 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.3.3.5.1.1.2 | ColumnprtDimIdx | read-only | current | This attribute indicates a unique port number of the DIM card. The convention used for DXC: (IO slot number+10)*10 + 1 Example: port1 of IO slot 11 will be: 21… |
| 1.3.6.1.4.1.164.3.3.3.5.1.1.3 | ColumnprtDimTxMode | read-write | current | Tx mode. regularTx - the links are connected to a similar outfit on the other side. In this mode, if a link fails, the transmitted bandwidth is decreased accor… |
| 1.3.6.1.4.1.164.3.3.3.5.1.1.4 | ColumnprtDimPolarity | read-write | current | Polarity. |
| 1.3.6.1.4.1.164.3.3.3.5.1.1.5 | ColumnprtDimClkMode | read-write | current | Clock Mode. smooth - a clock that is not 'pulsed'(has no 'gaps'). In this mode the DXC does NOT receive back the clock signal. extSmooth - same as 'smooth' but… |
| 1.3.6.1.4.1.164.3.3.3.5.1.1.6 | ColumnprtDimMaxDelay | read-write | current | Max Delay permitted between the links, in msec. |
| 1.3.6.1.4.1.164.3.3.3.5.1.1.7 | ColumnprtDimMng | read-write | current | Use of DIM port for management. disabled - no management on DIM ts1 - 1 bit of TS1 is used for management. |
| 1.3.6.1.4.1.164.3.3.3.5.1.1.8 | ColumnprtDimMngRoutProt | read-write | current | Mng Routing Protocol of the port. none - when prtDimMng is 'disabled'. |
| 1.3.6.1.4.1.164.3.3.3.5.2 | TableprtDimDestTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.3.3.5.2.1 | RowprtDimDestEntry | not-accessible | current | The write operation is valid only for the TmpCnfg entry (prtDimDestCnfgIdx=255). |
| 1.3.6.1.4.1.164.3.3.3.5.2.1.1 | ColumnprtDestCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg(1..255) being accessed. Idx of 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.3.3.5.2.1.2 | ColumnprtDestDimIdx | read-only | current | This attribute indicates a unique port number of the DIM card. The convention used for DXC: (IO slot number+10) & 1 Example: port1 of IO slot 11 will be: 211 . |
| 1.3.6.1.4.1.164.3.3.3.5.2.1.3 | ColumnprtDestIdx | read-only | current | This attribute indicates a destination number of the DIM card. |
| 1.3.6.1.4.1.164.3.3.3.5.2.1.4 | ColumnprtDest | read-write | current | Destination port,(of a T1/E1 port), that is connected to the DIM card, for the specified Destination number. 0 = No destination port. Else: For external ports:… |
| 1.3.6.1.4.1.164.3.3.3.5.2.1.5 | ColumnprtDestConnect | read-only | current | Connection Status of the specified destination number. For a specified destination port, it depends both on the status of the port and on the status of the far… |
| 1.3.6.1.4.1.164.3.3.3.6 | NodeprtI | |||
| 1.3.6.1.4.1.164.3.3.3.6.1 | TableprtICnfgTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.3.3.6.1.1 | RowprtICnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.3.6.1.1.1 | ColumnprtICnfgIdx | read-only | current | This attribute indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. |
| 1.3.6.1.4.1.164.3.3.3.6.1.1.2 | ColumnprtIIdx | read-only | current | This attribute indicates a unique number to identify a port. The valid port number depends on the IO slot no., the installed card type and the port type: outsi… |
| 1.3.6.1.4.1.164.3.3.3.6.1.1.3 | ColumnprtIRate | read-write | current | This object indicates the port rate in bits. Each TS contains 8 bits. Thus, 1 bit is equivalent to 8Kbps rate. |
| 1.3.6.1.4.1.164.3.3.3.6.1.1.4 | ColumnprtIConnect | read-write | current | D channel connection. no - disconnected yes - connected. |
| 1.3.6.1.4.1.164.3.3.3.7 | NodeprtHdsl | |||
| 1.3.6.1.4.1.164.3.3.3.7.1 | TableprtHdslTable | not-accessible | current | HDSL port table. |
| 1.3.6.1.4.1.164.3.3.3.7.1.1 | RowprtHdslEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.3.7.1.1.1 | ColumnprtHdslIdx | read-only | current | This attribute indicates a unique number to identify a port. The valid port number depends on the IO slot no., the installed card type and the port type: outsi… |
| 1.3.6.1.4.1.164.3.3.3.7.1.1.2 | ColumnprtHdslMode | read-write | current | This object indicates the HDSL mode. |
| 1.3.6.1.4.1.164.3.3.3.7.1.1.3 | ColumnprtHdslRptrType | read-only | current | The Repeater between Near and Far modem. none - no repeater exists between the modems hrpt - HRPT repeater exists between the modems. |
| 1.3.6.1.4.1.164.3.3.3.7.1.1.4 | ColumnprtHdslMaxRate | read-write | current | Maximum Rate of the xDSL Line, in Kbps units. This object can be Set only for a Central unit. |
| 1.3.6.1.4.1.164.3.3.3.7.1.1.5 | ColumnprtHdslLinkType | read-only | current | The Link Type. msdsl2w - MSDSL 2 Wire hdsl2w - HDSL 2 Wire hdsl4w - HDSL 4 Wire gDsl - G.DSL |
| 1.3.6.1.4.1.164.3.3.3.7.1.1.6 | ColumnprtHdslCompSwVer | read-only | current | This object indicates the Software Version of the component (Piggyback card) supporting this interface. |
| 1.3.6.1.4.1.164.3.3.3.7.1.1.7 | ColumnprtHdslCompHwVer | read-only | current | This object indicates the Hardware Version of the component (Piggyback card) supporting this interface. |
| 1.3.6.1.4.1.164.3.3.3.8 | NodeprtT3E3 | |||
| 1.3.6.1.4.1.164.3.3.3.8.1 | TableprtT3E3CnfgTable | not-accessible | current | T3/E3 port configuration table. |
| 1.3.6.1.4.1.164.3.3.3.8.1.1 | RowprtT3E3CnfgEntry | not-accessible | current | An entry in the T3/E3 port configuration table. |
| 1.3.6.1.4.1.164.3.3.3.8.1.1.1 | ColumnprtT3E3CnfgIdx | read-only | current | This attribute indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For DXC, write operations can be performed… |
| 1.3.6.1.4.1.164.3.3.3.8.1.1.2 | ColumnprtT3E3PrtIdx | read-only | current | This attribute indicates a unique port number. For DXC: The same numbering as for prtGenPrtIdx. The valid port number depends on the IO slot no., the installed… |
| 1.3.6.1.4.1.164.3.3.3.8.1.1.3 | ColumnprtT3E3Slt | read-only | current | This attribute indicates a unique number to identify the slot where the card is inserted in. When the unit is stand-alone, this object is not applicable and 25… |
| 1.3.6.1.4.1.164.3.3.3.8.1.1.4 | ColumnprtT3E3LineLength | read-write | current | This object is the length of the ds3 line in feet. It provides information for line build out circuitry if it exists and can use this object to adjust the line… |
| 1.3.6.1.4.1.164.3.3.3.8.1.1.5 | ColumnprtT3E3InbandMng | read-write | current | A unique number to identify the Frame Type over the link. For Optimux-T3: only values (4), (7) are supported. |
| 1.3.6.1.4.1.164.3.3.3.8.1.1.6 | ColumnprtT3E3AisFrame | read-write | current | This object is applicable only for Optimux-T3. It allows user to select whether the AIS sent will be framed or unframed. |
| 1.3.6.1.4.1.164.3.3.3.8.1.1.7 | ColumnprtT3E3TxClockSource | read-write | current | Tx Clock Source. |
| 1.3.6.1.4.1.164.3.3.3.8.1.1.8 | ColumnprtT3E3RoutProt | read-write | current | Routing Protocol of the port. This object is applicable only for T3 ports. |
| 1.3.6.1.4.1.164.3.3.3.8.1.1.9 | ColumnprtT3E3AisTransmit | read-write | current | Indicates if AIS signal will be transmitted over the tributary E3/DS3 upon failure. |
| 1.3.6.1.4.1.164.3.3.4 | NodegenDacsMux | |||
| 1.3.6.1.4.1.164.3.3.4.1 | TablecmprTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.3.4.1.1 | RowcmprEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.4.1.1.1 | ColumncmprTypeIdx | read-only | current | This object indicates the Type of the Compressed data referred (which table, which level, etc). The type is a code according to a convention between agent and … |
| 1.3.6.1.4.1.164.3.3.4.1.1.2 | ColumncmprCnfgIdx | read-only | current | This object indicates the configuration number the Compressed information relates to. |
| 1.3.6.1.4.1.164.3.3.4.1.1.3 | ColumncmprVersion | read-only | current | This object indicates the version of the internal format of the Compressed data (the version of the convention used). |
| 1.3.6.1.4.1.164.3.3.4.1.1.4 | ColumncmprSltIdx | read-only | current | This attribute indicates a unique number of the slot position where the card is inserted. When the unit is stand-alone or this object is not applicable, 255 wi… |
| 1.3.6.1.4.1.164.3.3.4.1.1.5 | ColumncmprPrtIdx | read-only | current | This object indicates a unique identifier of the port, the compressed information relates to. For DXC - according to the order in the card of cmprSltIdx: - fir… |
| 1.3.6.1.4.1.164.3.3.4.1.1.6 | ColumncmprObj | read-write | current | This object is the compressed information itself, according to a predefined format, both agent and NMS agreed about. |
| 1.3.6.1.4.1.164.3.3.4.2 | TablemapLinkTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.3.4.2.1 | RowmapLinkEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.4.2.1.1 | ColumnmapLinkIdx | read-only | current | A unique identifier of the link |
| 1.3.6.1.4.1.164.3.3.4.2.1.2 | ColumnmapLinkSlotIdx | read-write | current | This attribute indicates a unique slot position where the module is inserted. |
| 1.3.6.1.4.1.164.3.3.4.2.1.3 | ColumnmapLinkPortIdx | read-write | current | This attribute indicates a unique port number. The valid port number depends on the IO slot no., the installed card type and the port type: outside, inside, SP… |
| 1.3.6.1.4.1.164.3.3.4.2.1.4 | ColumnmapLinkState | read-only | current | This attribute indicates the status of the link between the two muxes |
| 1.3.6.1.4.1.164.3.3.4.3 | TablealrGenTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.3.4.3.1 | RowalrGenEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.4.3.1.1 | ColumnalrGenCode | read-only | current | This object is a unique code number, identifying a certain alarm. |
| 1.3.6.1.4.1.164.3.3.4.3.1.2 | ColumnalrGenDescription | read-only | current | This entry is a unique text description, of the alarm corresponding to the specified code. |
| 1.3.6.1.4.1.164.3.3.4.3.1.3 | ColumnalrGenLevel | read-only | current | Alarm level. |
| 1.3.6.1.4.1.164.3.3.4.3.1.4 | ColumnalrGenSlotType | read-only | current | Slot type that the alarm is relevant to. clAndIo - an alarm that is relevant for both CL and IO slots. |
| 1.3.6.1.4.1.164.3.3.4.3.1.5 | ColumnalrGenSeverity | read-write | current | This object enables the user to select a severity for each alarm. The severity is set per alarm code (same for all slots/ports using this code). |
| 1.3.6.1.4.1.164.3.3.4.3.1.6 | ColumnalrGenDebounce | read-write | current | Debounce time for each alarm code, in seconds. The meaning is, that an alarm will be 'declared' as ON (or OFF), only after it was actually ON/OFF the Debouncin… |
| 1.3.6.1.4.1.164.3.3.4.3.1.7 | ColumnalrGenDefSeverity | read-only | current | This object reports the default severity of each alarm. User can change the severity of the alarms defined by this default via the alrGenSeverity object. |
| 1.3.6.1.4.1.164.3.4 | NodemodmSys | |||
| 1.3.6.1.4.1.164.3.4.0 | IdentitymodmSysEvents | current | The events for General Modems. | |
| 1.3.6.1.4.1.164.3.4.0.3 | NotificationmodmHubConfigChange | current | The trap is sent when any card of the modems Hub is inserted or removed. | |
| 1.3.6.1.4.1.164.3.4.0.4 | NotificationmodemMasterSlaveComm | current | This trap is applicable only for IMOD modems . The trap is sent when communication between a Master modem and its Slave is stopped or resumed. 'modemMngLink' i… | |
| 1.3.6.1.4.1.164.3.4.0.5 | NotificationmodemMasterChange | current | This trap is applicable only for IMOD modems . The trap is sent when a modem's permanent or temporary mode is changed. 'modemConfigMode' and 'modemModeTemporar… | |
| 1.3.6.1.4.1.164.3.4.0.6 | NotificationmngmntControlChange | current | This trap is applicable only for LRS-12. The trap is sent when the Hub management controller is changed (NMS<->Terminal). | |
| 1.3.6.1.4.1.164.3.4.0.7 | NotificationmodemInvalidParameter | current | This trap is applicable only for IMOD cards of a Hub. The trap is sent when an invalid parameter was Set to the modem. | |
| 1.3.6.1.4.1.164.3.4.0.8 | NotificationmodemAlarm | current | This trap is applicable only for IMOD modems . The trap is sent when the active alarms of an IMOD modem, change. | |
| 1.3.6.1.4.1.164.3.4.0.9 | NotificationcardStatusChange | current | The trap is sent upon any change of the Leds status in the PS, CL or IMOD cards. | |
| 1.3.6.1.4.1.164.3.4.0.10 | NotificationmodemSignalingChange | current | The trap is sent for any IMOD modem, when an unmasked signal change occured in the attached variable (see modemMaskSignaling object). | |
| 1.3.6.1.4.1.164.3.4.0.11 | NotificationmodmHubPsFail | current | The trap is sent when a PS card of the modems-Hub failed. 'mdlSLed' includes the mdlSIdx. | |
| 1.3.6.1.4.1.164.3.4.0.12 | NotificationmodmHubIPModeChange | current | The trap is sent upon any change of modmHubIpMode parameter. | |
| 1.3.6.1.4.1.164.3.4.0.13 | NotificationmodmInterfaceChange | current | The trap is sent upon any change of interfaces for a modem that is a card of a Hub or part of it. In order to know what changed, for each product, specific var… | |
| 1.3.6.1.4.1.164.3.4.0.14 | NotificationmodmRackAlarms | current | The trap is applicable for LRS-52. The trap is sent when an alarm occurs. Attached variables are detailed in product specification. | |
| 1.3.6.1.4.1.164.3.4.1 | NodemodmSystem | |||
| 1.3.6.1.4.1.164.3.4.1.1 | NodemodmSa | |||
| 1.3.6.1.4.1.164.3.4.1.1.0 | IdentitymodmSaEvents | current | The events for Stand Alone Modems. | |
| 1.3.6.1.4.1.164.3.4.1.1.0.1 | NotificationmodmSAlarmTrap | current | The trap is sent every 5 seconds in which a change has occurred in the status of the variables sent. For modems containing a T1/E1 interface, dsx1LineStatus wi… | |
| 1.3.6.1.4.1.164.3.4.1.1.0.2 | NotificationmodmSLedTrap | current | The trap is sent every 5 seconds in which a change has occurred in the state of one of the LEDs. This trap is applicable for Stand-Alone modems or Agents that … | |
| 1.3.6.1.4.1.164.3.4.1.1.1 | TablemodmSaConfigTable | not-accessible | current | Configuration parameters of the Central and Remote Modems. The table will be RW for a Central agent and RO for a Remote agent. |
| 1.3.6.1.4.1.164.3.4.1.1.1.1 | RowmodmSaConfigEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.4.1.1.1.1.1 | ColumnmodmSaConfigMode | read-only | current | The mode indicates if the configuration parameters refer the Central or the Remote Modem. For AMC 102 the remote means regenerator. There can be some regenerat… |
| 1.3.6.1.4.1.164.3.4.1.1.1.1.2 | ColumnmodmSaConfigLoopback | read-write | current | The possible loopbacks. It is not possible to have a remPortLoop(4) in both, Central and Remote units simultaneously. |
| 1.3.6.1.4.1.164.3.4.1.1.1.1.3 | ColumnmodmSaConfigAlrClearOnCmd | read-write | current | Setting this attribute to on, clears all the events, both from the active alarms list and from the alarms buffer. Upon completion, the value will automatically… |
| 1.3.6.1.4.1.164.3.4.1.1.1.1.4 | ColumnmodmSaConfigAlrClearAllCmd | read-write | current | Setting this attribute to on, clears all the alarms of the alarm buffer and active alarms list. Upon completion, the value will automatically change to off(2). |
| 1.3.6.1.4.1.164.3.4.1.1.1.1.5 | ColumnmodmSaConfigTestClearCmd | read-write | current | Setting this attribute to on, clears all the user-initiated tests and loopbacks. The variable modmSaConfigLoopback should automatically change to noLoopback. U… |
| 1.3.6.1.4.1.164.3.4.1.1.1.1.6 | ColumnmodmSaConfigClkMaster | read-write | current | Modem configured as Central: External - Locked to the clock signal provided by the user's equipment by user's port. Internal - Internal oscillator. Station - S… |
| 1.3.6.1.4.1.164.3.4.1.1.1.1.7 | ColumnmodmSaConfigResetStatistics | read-write | current | In the on state all statistics counters (including E1 counters) are zeroed. Upon completion, the value will automatically change to off(2). Modems that do not … |
| 1.3.6.1.4.1.164.3.4.1.1.1.1.8 | ColumnmodmSaConfigActiveTs | read-write | current | This object will be RO for the Remote modem. This is the number of active HDSL Time Slots, that determines user's data rate. Valid values: 1..maximum supported… |
| 1.3.6.1.4.1.164.3.4.1.1.1.1.9 | ColumnmodmSaConfigReset | read-write | current | Reset of modem. hw - HW Reset. The configured values will not change. hwAndConfig - HW Reset and initializing the default values. notApplicable - for modems wi… |
| 1.3.6.1.4.1.164.3.4.1.1.1.1.10 | ColumnmodmSaConfigRemote | read-write | current | This parameter enables or disables automatic configuration of the remote moden in Proxy mode. |
| 1.3.6.1.4.1.164.3.4.1.1.1.1.11 | ColumnmodmSaConfigPsType | read-only | current | The type of PS. |
| 1.3.6.1.4.1.164.3.4.1.1.1.1.12 | ColumnmodmSaConfigWorkMode | read-write | current | The work mode indicates if devices work in transparent mode or termination mode. |
| 1.3.6.1.4.1.164.3.4.1.1.2 | TablemodmSaStatTable | not-accessible | current | Status of the Central and Remote Modems. |
| 1.3.6.1.4.1.164.3.4.1.1.2.1 | RowmodmSaStatEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.4.1.1.2.1.1 | ColumnmodmSaStatHwTest | read-only | current | The variable contains the results of the last hardware test. It is a sum of 2**n where n is as follows: 0 - EPROM Failure (or Database chksum error) 1 - I/O Ex… |
| 1.3.6.1.4.1.164.3.4.1.1.2.1.2 | ColumnmodmSaStatAlarms | read-only | current | The variable contains the status of the Alarms in the alarm buffer. For bit location of each Alarm in the OctetString see Modem's specification. If the value i… |
| 1.3.6.1.4.1.164.3.4.1.1.2.1.3 | ColumnmodmSaStatClkSrc | read-only | current | This entry indicates the source of the modem clock. |
| 1.3.6.1.4.1.164.3.4.1.1.2.1.4 | ColumnmodmSaStatAlarmsMask | read-write | current | This variable uses to mask alarms. Location of each Alarm Mask in the OctetString, is identical to the Alarm OctetString. If the value is 0 then none of the al… |
| 1.3.6.1.4.1.164.3.4.1.1.2.1.5 | ColumnmodmSaStatDeviceType | read-only | current | This entry indicates the device type (or utility). |
| 1.3.6.1.4.1.164.3.4.1.1.2.1.6 | ColumnmodmSaStatSwVersion | read-only | current | Display String of the modem SW version. Format: W. X Y Z 0..9 0..99 A,B,E 0..99 (Z+P are optional.) A=alpha, B=beta, E=end of development. Examples: 2.23A8 3.4 |
| 1.3.6.1.4.1.164.3.4.1.1.2.1.7 | ColumnmodmSaStatHwVersion | read-only | current | Display String of the modem HW version. |
| 1.3.6.1.4.1.164.3.4.1.1.3 | TablemodmSaAlarmBuffTable | not-accessible | current | The alarm buffer of the Central and Remote Modems. |
| 1.3.6.1.4.1.164.3.4.1.1.3.1 | RowmodmSaAlarmBuffEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.4.1.1.3.1.1 | ColumnmodmSaAlarmBuffIndex | read-only | current | The index of the alarm buffer Table. |
| 1.3.6.1.4.1.164.3.4.1.1.3.1.2 | ColumnmodmSaAlarmBuffCode | read-only | current | The code of the alarm. For text description of each Alarm code see Modem's specification. |
| 1.3.6.1.4.1.164.3.4.1.1.3.1.3 | ColumnmodmSaAlarmBuffTime | read-only | current | The time stamp at which the alarm has occurred. The format is hh:mm:ss |
| 1.3.6.1.4.1.164.3.4.1.1.3.1.4 | ColumnmodmSaAlarmBuffState | read-only | current | The new status of the alarm. |
| 1.3.6.1.4.1.164.3.4.1.1.4 | NodemodmSaParam | |||
| 1.3.6.1.4.1.164.3.4.1.1.4.1 | ScalarmodmSaMode | read-only | current | The agent's current mode. For AMC 102 remote means regenerator. There can be some regenerators connecting one by the other. |
| 1.3.6.1.4.1.164.3.4.1.1.4.2 | ScalarmodmSaFarEndIpAddress | read-write | current | The IP address of the agent on the far end. If the Remote modem is NOT an agent, the variable will be 0.0.0.0. Set - will be enabled only to a Central modem th… |
| 1.3.6.1.4.1.164.3.4.1.1.4.3 | ScalarmodmSaFarEndType | read-only | current | The type of the Far-End modem. |
| 1.3.6.1.4.1.164.3.4.1.1.4.4 | ScalarmodmSaRptrType | read-only | current | The Repeater between the Near and Far modem. none - no repeater exists between the modems. notApplicable - for modems that do not support this feature. |
| 1.3.6.1.4.1.164.3.4.1.1.4.5 | ScalarmodmSaLearnLineMode | read-write | current | This parameter is for the central unit only. Indicates if learn the regenerator order and number every time there is a fail in line or manually by user. |
| 1.3.6.1.4.1.164.3.4.1.1.4.6 | ScalarmodmSaNumOfUnits | read-only | current | This object will hold the number of regenerators in the line. |
| 1.3.6.1.4.1.164.3.4.1.1.5 | TablemodmSaRptrTable | not-accessible | current | The Repeaters parameters known to the central modem. |
| 1.3.6.1.4.1.164.3.4.1.1.5.1 | RowmodmSaRptrEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.4.1.1.5.1.1 | ColumnmodmSaIndex | read-only | current | A unique number to identify the modem that reports about the repeater. |
| 1.3.6.1.4.1.164.3.4.1.1.5.1.2 | ColumnmodmSaRptrIndex | read-only | current | The index of the Repeater. |
| 1.3.6.1.4.1.164.3.4.1.1.5.1.3 | ColumnmodmSaRptrTest | read-write | current | The possible loopbacks. |
| 1.3.6.1.4.1.164.3.4.1.1.5.1.4 | ColumnmodmSaRptrActiveAlarms | read-only | current | Status of the Alarms. Each bit represents a specific alarm . For bit location of each alarm in the Octet String see modem's specification. If the value is 0 th… |
| 1.3.6.1.4.1.164.3.4.1.1.5.1.5 | ColumnmodmSaRptrAlrClear | read-write | current | Setting this attribute to on, clears all the active (On) alarms of the repeater. Upon completion, the value will automatically change to off(2).. |
| 1.3.6.1.4.1.164.3.4.1.1.5.1.6 | ColumnmodmSaRptrVersion | read-only | current | SW/HW version of the repeater |
| 1.3.6.1.4.1.164.3.4.1.2 | NodemodmHub | |||
| 1.3.6.1.4.1.164.3.4.1.2.1 | NodemodmHubParam | |||
| 1.3.6.1.4.1.164.3.4.1.2.1.1 | ScalarmodmHubTermConnect | read-only | current | Status: is the Terminal connected or not. |
| 1.3.6.1.4.1.164.3.4.1.2.1.2 | ScalarmodmHubController | read-write | current | Selection of Hub controller during normal operation. If 'terminal' is selected, NMS can still return control to itself by setting this object to 'nms'. While t… |
| 1.3.6.1.4.1.164.3.4.1.2.1.3 | ScalarmodmHubId | read-write | current | 4 Hex characters, identifying the Hub. The last two characters (least significant) will be displayed on the Hub's CL card by a 7 segment display. |
| 1.3.6.1.4.1.164.3.4.1.2.1.4 | ScalarmodmHubT1E1 | read-only | current | The T1/E1 value determines the Hub's clock rate. |
| 1.3.6.1.4.1.164.3.4.1.2.1.5 | ScalarmodmHubClockSource | read-write | current | Clock source. |
| 1.3.6.1.4.1.164.3.4.1.2.1.6 | ScalarmodmHubClockRate | read-write | current | Clock Rate in bps. The rates are the original T1/E1 rates or the rates divided by 2n. For modmHubT1E1=e1, instances (1)-(9) are applicable. For modmHubT1E1=t1,… |
| 1.3.6.1.4.1.164.3.4.1.2.1.7 | ScalarmodmHubIpMode | read-write | current | single - Upon BootP request from S-MOD, CM-2 will assign a 'private IP' (CM-2 IP + slot number of S-MOD), which will be applicable only between the S-MOD and C… |
| 1.3.6.1.4.1.164.3.4.1.2.1.8 | ScalarmodmHubInstallation | read-write | current | The string will be a multiple set of 16 bit corresponds to its card position, and each set corresponds to a modem, where set #1 is the first modem on each card… |
| 1.3.6.1.4.1.164.3.4.1.2.2 | NodemodmHubAlarms | |||
| 1.3.6.1.4.1.164.3.4.1.2.2.1 | ScalarmodmHubActiveAlarms | read-only | current | Status of the Alarms for each Slot. Each bit represents a Slot of the Hub. For bit location of each Alarm in the Octet String see Hub's specification. A bit is… |
| 1.3.6.1.4.1.164.3.4.1.2.2.2 | ScalarmodmHubAlrClear | read-write | current | Setting this attribute to on, clears all the active (On) alarms of the Hub. Upon completion, the value will automatically change to off(2). |
| 1.3.6.1.4.1.164.3.4.1.2.2.3 | ScalarmodmHubMaskAlarms | read-write | current | Mask of Alarms per Slot. Each bit represents a Slot of the Hub. For bit location of each Slot in the Octet String see Hub's specification (same as modmHubActiv… |
| 1.3.6.1.4.1.164.3.4.2 | NodemodmMdl | |||
| 1.3.6.1.4.1.164.3.4.2.1 | NodemodmMdlParam | |||
| 1.3.6.1.4.1.164.3.4.2.1.1 | TablemdlParamTable | not-accessible | current | Parameters table of cards in the Hub. |
| 1.3.6.1.4.1.164.3.4.2.1.1.1 | RowmdlParamEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.4.2.1.1.1.1 | ColumnmdlSIdx | read-only | current | A unique number to identify a slot position in the modems Hub. |
| 1.3.6.1.4.1.164.3.4.2.1.1.1.2 | ColumnmdlSNoOfModems | read-only | current | Number of modems on this card. 255 = notApplicable. |
| 1.3.6.1.4.1.164.3.4.2.1.1.1.3 | ColumnmdlCardType | read-only | current | Card's type. |
| 1.3.6.1.4.1.164.3.4.2.1.1.1.4 | ColumnmdlSPanelType | read-only | current | LRS-12 Card connectors' panel type. fx - IMOD panels psxxx - PS panels fxCm2 - CM-2 panels. |
| 1.3.6.1.4.1.164.3.4.2.1.1.1.5 | ColumnmdlSLed | read-only | current | LEDs status on the card . Each led will be represented by 4 bits where the first 2 bits (left) will specify the Status : (00=NA, 01=OFF, 10=ON, 11=BLINK), and … |
| 1.3.6.1.4.1.164.3.4.2.1.1.1.6 | ColumnmdlSActiveAlarms | read-only | current | This object is applicable only for PS and CL cards. It gives the status of the Alarms for each Slot. Each bit represents an alarm in the slot. For bit location… |
| 1.3.6.1.4.1.164.3.4.2.1.1.1.7 | ColumnmdlAlrClear | read-write | current | Setting this attribute to on, clears all the active (On) alarms of the Slot. Upon completion, the value will automatically change to off(2). |
| 1.3.6.1.4.1.164.3.4.2.1.1.1.8 | ColumnmdlSConfigMismatch | read-only | current | This object is applicable only for slots containing IMOD cards. ON - when CM-2 realizes that the configuration of the Near-End modem1 is different from that of… |
| 1.3.6.1.4.1.164.3.4.2.1.1.1.9 | ColumnmdlConfigSource | read-write | current | This object is applicable only for slots containing IMOD cards, when mdlSConfigMismatch=on/on1/on2. nearEnd - Near End - 1 modem has the correct configuration … |
| 1.3.6.1.4.1.164.3.4.2.1.1.1.10 | ColumnmdlConfigGround | read-only | current | Enables to connect or disconnect an IMOD card to the ground. disconnect - not connected to ground. connect - connected to ground. notApplicable - for other car… |
| 1.3.6.1.4.1.164.3.4.2.1.1.1.11 | ColumnmdlCapabilities | read-only | current | Indicates the optional capabilities that are implemented by this module and are manageable through this MIB. For each capability 1 BIT is allocated in each Oct… |
| 1.3.6.1.4.1.164.3.4.2.1.1.1.12 | ColumnmdlClockSource | read-write | current | The Clock Source of the Card. Applicable for ASMi-52 modems only. internal - means that the card uses its own Internal Clock external - means that the card use… |
| 1.3.6.1.4.1.164.3.4.3 | Nodemodem | |||
| 1.3.6.1.4.1.164.3.4.3.1 | NodemodemParam | |||
| 1.3.6.1.4.1.164.3.4.3.1.1 | TablemodemParamTable | not-accessible | current | This parameters table is applicable mainly for modems that are not agents. |
| 1.3.6.1.4.1.164.3.4.3.1.1.1 | RowmodemParamEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.4.3.1.1.1.1 | ColumnmodemIdx | read-only | current | For LRS: A unique number to identify a modem in the Hub or its far-end modem. For DXC: This will be the ifIndex of the External Port of D8SL card, that works w… |
| 1.3.6.1.4.1.164.3.4.3.1.1.1.2 | ColumnmodemType | read-only | current | Modem type. xxxxxx - Stand-Alone modem. xxxxxxc - Modem on a Card within a Hub having an Agent. xxxxxxr - Modem on a Card within a Hub having no Agent. xxxxxxc… |
| 1.3.6.1.4.1.164.3.4.3.1.1.1.3 | ColumnmodemConfigMode | read-write | current | The mode identifies if the Modem operates as the Master unit or as the Slave unit. For modems having a jumper for this function, this object will be RO. This o… |
| 1.3.6.1.4.1.164.3.4.3.1.1.1.4 | ColumnmodemModeTemporary | read-write | current | This object specifies if the Modem operates as modemConfigMode value (Master/Slave) temporarily or permanently. This object can be Set only when: - modemConfig… |
| 1.3.6.1.4.1.164.3.4.3.1.1.1.5 | ColumnmodemNoOfDte | read-only | current | Number of DTE ports in the modem. |
| 1.3.6.1.4.1.164.3.4.3.1.1.1.6 | ColumnmodemWire | read-write | current | Modem wiring. |
| 1.3.6.1.4.1.164.3.4.3.1.1.1.7 | ColumnmodemMngLink | read-only | current | Communication status between the pair of modems. |
| 1.3.6.1.4.1.164.3.4.3.1.1.1.8 | ColumnmodemReset | read-write | current | When this object is set to the value of hwReset(3), the module performs HW Reset. When this object is set to the value of configReset(4), the modem performs Co… |
| 1.3.6.1.4.1.164.3.4.3.1.1.1.9 | ColumnmodemSlot | read-only | current | A unique number to identify the slot position of the modem (card)in its Hub. notApplicable - for a stand-alone modem or Rack 214 card. io13..io15 - are for DXC… |
| 1.3.6.1.4.1.164.3.4.3.1.1.1.10 | ColumnmodemHubId | read-only | current | 4 Hex characters, identifying the Hub. The last two characters (least significant) will be displayed on the Hub's CL card by a 7 segment display. This object i… |
| 1.3.6.1.4.1.164.3.4.3.1.1.1.11 | ColumnmodemIpAddress | read-write | current | For LRS: The IP address of the LRS-12 agent . If the modem is NOT an LRS-12 card, the variable will be 0.0.0.0. For DXC and MP: the IP Address of the Far-End u… |
| 1.3.6.1.4.1.164.3.4.3.1.1.1.12 | ColumnmodemPsType | read-only | current | The type of PS, for a stand-alone modem. notApplicable - for LRS-12 or Rack 214 card. |
| 1.3.6.1.4.1.164.3.4.3.1.1.1.13 | ColumnmodemMaskTraps | read-write | current | The value determines the modem traps the agent should mask and not send to the management console. The value is a sum of 2**n, where n is a bit assigned to a c… |
| 1.3.6.1.4.1.164.3.4.3.1.1.1.14 | ColumnmodemActiveAlarms | read-only | current | Status of the Alarms for each modem. Each bit represents an alarm. For bit location of each Alarm in the Octet String see modem's specification. A bit is '1' i… |
| 1.3.6.1.4.1.164.3.4.3.1.1.1.15 | ColumnmodemAlrClear | read-write | current | Setting this attribute to on, clears all the active (On) alarms of the modem. Upon completion, the value will automatically change to off(2). |
| 1.3.6.1.4.1.164.3.4.3.1.1.1.16 | ColumnmodemAlrBufClear | read-write | current | Setting this attribute to on, clears all the alarms in the buffer alarm of the modem. Upon completion, the value will automatically change to off(2). |
| 1.3.6.1.4.1.164.3.4.3.1.1.1.17 | ColumnmodemMaskSignaling | read-write | current | Mask of Signals per modem. When a signal is masked, the agent will not send the modemSignalingChange TRAP, upon change of this signal's value and it will not e… |
| 1.3.6.1.4.1.164.3.4.3.1.1.1.18 | ColumnmodemPanelType | read-only | current | The panel type of the modem. This parameter is applicable only for Far-End modems that are stand-alone or cards of another LRS-12. It enables displaying the co… |
| 1.3.6.1.4.1.164.3.4.3.1.1.1.19 | ColumnmodemIType | read-write | current | Is the modem Intelligent (ASMi-xx) ; or not - (ASM-xx). This object is used only for the Far-End modem (with the relevant modemIdx). notApplicable - for ASMi-3… |
| 1.3.6.1.4.1.164.3.4.3.1.1.1.20 | ColumnmodemRcvPower | read-only | current | The Rx Level of the modem, in dBm. Valid values: -99 .. 0. 255=not applicable. |
| 1.3.6.1.4.1.164.3.4.3.1.1.1.21 | ColumnmodemSwVersion | read-only | current | SW version of the modem, multiplied by 100. Example: 115 means SW ver: 1.15 0 = notApplicable. |
| 1.3.6.1.4.1.164.3.4.3.1.1.1.22 | ColumnmodemLed | read-only | current | LEDs status on the card . Each led will be represented by 4 bits where the first 2 bits (left) will specify the Status : (00=NA, 01=OFF, 10=ON, 11=BLINK), and … |
| 1.3.6.1.4.1.164.3.4.3.1.1.1.23 | ColumnmodemRemoteType | read-only | current | Remote modem card type. Not applicable to near - end modems. For LRS-52, sa(3)=saMaster. |
| 1.3.6.1.4.1.164.3.4.3.1.1.1.24 | ColumnmodemConfigPhantom | read-write | current | Enables to supply electric power to remote devices (SA modem, repeaters), through the current module. off - remote devices will not get PS through the current … |
| 1.3.6.1.4.1.164.3.4.3.1.1.1.25 | ColumnmodemRemoteTestEnable | read-write | current | This parameter identifies if the remote Modem allowed to operates tests. For Near-End modems this parameter will be ON. |
| 1.3.6.1.4.1.164.3.4.3.1.1.1.26 | ColumnmodemSwVerString | read-only | current | Display String of the modem SW version. Format: X. Y Z P 0..9 0..99 A,B,E 0..99 (Z+P are optional.) A=alpha, B=beta, E=end of development. Examples: 2.23A8 3.4 |
| 1.3.6.1.4.1.164.3.4.3.1.1.1.27 | ColumnmodemRemoteIdx | read-only | current | 0 = notApplicable. For LRS: The Remote modem index. Applicable only for modemRemoteType=double(5) or quad(7). For DXC, LRS-52 and MP: - if Remote unit is an LR… |
| 1.3.6.1.4.1.164.3.4.3.1.1.1.28 | ColumnmodemHwVerString | read-only | current | Display String of the modem HW version. |
| 1.3.6.1.4.1.164.3.4.3.1.1.1.29 | ColumnmodemResetStatistics | read-write | current | In the on state all statistics counters (including E1 counters) are zeroed. Upon completion, the value will automatically change to off(2). notApplicable - for… |
| 1.3.6.1.4.1.164.3.4.3.1.1.1.30 | ColumnmodemMaxRate | read-only | current | Maximum rate supported by the modem |
| 1.3.6.1.4.1.164.3.4.3.1.1.1.31 | ColumnmodemBoxMaterial | read-only | current | Shape (picture) of modem box is related to box material. Applicable for ASMi52 SA |
| 1.3.6.1.4.1.164.3.4.3.1.1.1.32 | ColumnmodemLowSpeed | read-only | current | This parameter enables working at low rates, when working with a serial interface (V.35,X.21) modem opposite to a E1/T1 interface modem. |
| 1.3.6.1.4.1.164.3.4.3.1.1.1.33 | ColumnmodemDevicePorts | read-only | current | The value indicates the existence of optional ports (which are not Line or DTE). The value is a sum of 2**n, where n is a bit assigned to a certain port. For b… |
| 1.3.6.1.4.1.164.3.4.3.1.1.1.34 | ColumnmodemUserName | read-write | current | This object allows the user to configure a name for the selected modem. |
| 1.3.6.1.4.1.164.3.4.3.1.1.1.35 | ColumnmodemRowValidity | read-write | current | This parameter defines whether this row is valid or not. It is an optional parameter. |
| 1.3.6.1.4.1.164.3.4.3.1.1.1.36 | ColumnmodemTftpCmd | read-write | current | This parameter defines the TFTP Command. After performing the command, the Agent will automatically set this variable to noOp(1). |
| 1.3.6.1.4.1.164.3.4.3.2 | NodemodemAlrBuffer | |||
| 1.3.6.1.4.1.164.3.4.3.2.1 | TablemodemAlrBufTable | not-accessible | current | This parameters table is applicable only for modems that are not agents. |
| 1.3.6.1.4.1.164.3.4.3.2.1.1 | RowmodemAlrBufEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.4.3.2.1.1.1 | ColumnmodemAlrBufIdx | read-only | current | Running index of the alarm buffer table. |
| 1.3.6.1.4.1.164.3.4.3.2.1.1.2 | ColumnmodemAlrBufCode | read-only | current | The code of the alarm. For text description of each Alarm code see Modem's specification. |
| 1.3.6.1.4.1.164.3.4.3.2.1.1.3 | ColumnmodemAlrBufState | read-only | current | The new status of the alarm. |
| 1.3.6.1.4.1.164.3.4.3.2.1.1.4 | ColumnmodemAlrBufDate | read-only | current | The Date at which the alarm has occurred. The format is according to the entered systemDate format. |
| 1.3.6.1.4.1.164.3.4.3.2.1.1.5 | ColumnmodemAlrBufTime | read-only | current | The time stamp at which the alarm has occurred. The format is hh:mm:ss |
| 1.3.6.1.4.1.164.3.4.3.2.1.1.6 | ColumnmodemAlrBufSysUpTime | read-only | current | The value of sysUpTime at the time the alarm has occurred. This object is applicable only for products that cannot support calendar date (modemAlrBufDate) and … |
| 1.3.6.1.4.1.164.3.4.3.3 | NodemodemStatistics | |||
| 1.3.6.1.4.1.164.3.4.3.3.1 | TablemodemGeneralTable | not-accessible | current | The IMOD General data Table. The data is specific to each modem. |
| 1.3.6.1.4.1.164.3.4.3.3.1.1 | RowmodemGeneralEntry | not-accessible | current | An entry in the modemGeneralTable. This entry is per modem. Each modem has a specific index, which identifies it. |
| 1.3.6.1.4.1.164.3.4.3.3.1.1.1 | ColumnmodemCurrentElapsedTime | read-only | current | The number of seconds that have elapsed since the beginning of the current error-measurement period. |
| 1.3.6.1.4.1.164.3.4.3.3.1.1.2 | ColumnmodemValidIntervals | read-only | current | The number of previous intervals for which data was collected. The value will be 96 unless the interface was brought on-line within the last 24 hours, in which… |
| 1.3.6.1.4.1.164.3.4.3.3.2 | TablemodemIntervalTable | not-accessible | current | The IMOD Interval Table. The data is specific to each modem. |
| 1.3.6.1.4.1.164.3.4.3.3.2.1 | RowmodemIntervalEntry | not-accessible | current | An entry in the modemIntervalTable. This entry is per modem and per interval selected. |
| 1.3.6.1.4.1.164.3.4.3.3.2.1.1 | ColumnmodemIntervalNumber | read-only | current | The number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming tha… |
| 1.3.6.1.4.1.164.3.4.3.3.2.1.2 | ColumnmodemSyncLoss | read-only | current | Percent of interval, SyncLoss signal is ON. 101 = notApplicable/unknown. |
| 1.3.6.1.4.1.164.3.4.3.3.2.1.3 | ColumnmodemLineQuality | read-only | current | Quality of Line for the selected modem, in the selected valid interval. |
| 1.3.6.1.4.1.164.3.4.3.3.2.1.4 | ColumnmodemLineUtility | read-only | current | Percent of interval, Line is utilized. 101 = notApplicable/unknown. |
| 1.3.6.1.4.1.164.3.4.3.3.2.1.5 | ColumnmodemRTS | read-only | current | Percent of interval, RTS signal is ON. 101 = notApplicable/unknown. |
| 1.3.6.1.4.1.164.3.4.3.3.2.1.6 | ColumnmodemCD | read-only | current | Percent of interval, CD signal is ON. 101 = notApplicable/unknown. |
| 1.3.6.1.4.1.164.3.4.3.3.2.1.7 | ColumnmodemBertResult | read-only | current | Result of BERT for the selected modem, in the selected valid interval. |
| 1.3.6.1.4.1.164.3.4.3.3.2.1.8 | ColumnmodemBpvError | read-only | current | BPV Error. The Octet will be built as follows: MSB 7 6 5 4 3 2 1 0 LSB |__| |______________| y=0..3 x=0..63 BPV Error = x * (10**y) An Agent that does not supp… |
| 1.3.6.1.4.1.164.3.4.3.3.2.1.9 | ColumnmodemFoError | read-only | current | FO Error. The Octet will be built as follows: MSB 7 6 5 4 3 2 1 0 LSB |__| |______________| y=0..3 x=0..63 FO Error = x * (10**y) An Agent that does not suppor… |
| 1.3.6.1.4.1.164.3.4.4 | NodemodmPrt | |||
| 1.3.6.1.4.1.164.3.4.4.1 | NodemodmSpPort | |||
| 1.3.6.1.4.1.164.3.4.4.1.1 | TablemodmPrtSpTable | not-accessible | current | Configuration parameters of the Local or Remote Modem Supervisory Ports. The port will be identified by its specific ifIndex value. |
| 1.3.6.1.4.1.164.3.4.4.1.1.1 | RowmodmPrtSpEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.4.4.1.1.1.1 | ColumnmodmPrtSpUsage | read-write | current | This attribute indicates what is the usage of the port. |
| 1.3.6.1.4.1.164.3.4.4.1.1.1.2 | ColumnmodmPrtSpRate | read-write | current | This attribute indicates the operation rate (speed) of the port. auto - automatic rate selection, by the agent. |
| 1.3.6.1.4.1.164.3.4.4.1.1.1.3 | ColumnmodmPrtSpDataBits | read-write | current | This attribute indicates the number of data bits in the word format. |
| 1.3.6.1.4.1.164.3.4.4.1.1.1.4 | ColumnmodmPrtSpParity | read-write | current | This attribute indicates the parity mode in async frame |
| 1.3.6.1.4.1.164.3.4.4.1.1.1.5 | ColumnmodmPrtSpInterface | read-write | current | This attribute indicates the supervisory port interface. dce - the modem appears as a DCE for the SP port. dte - the modem operates as a DTE, for connection vi… |
| 1.3.6.1.4.1.164.3.4.4.1.1.1.6 | ColumnmodmPrtSpCTS | read-write | current | CTS line state. |
| 1.3.6.1.4.1.164.3.4.4.1.1.1.7 | ColumnmodmPrtSpDcdDelay | read-write | current | DCD delay in msec. d10 = delay of 10msec. |
| 1.3.6.1.4.1.164.3.4.4.1.1.1.8 | ColumnmodmPrtSpDsr | read-write | current | DSR line state. |
| 1.3.6.1.4.1.164.3.4.4.2 | NodemodmDs1Port | |||
| 1.3.6.1.4.1.164.3.4.4.2.1 | TablemodmPrtDs1Table | not-accessible | current | Statistics parameters of the Local and Remote modem Ds1 ports. The port will be identified by its specific ifIndex value. |
| 1.3.6.1.4.1.164.3.4.4.2.1.1 | RowmodmPrtDs1Entry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.4.4.2.1.1.1 | ColumnmodmPrtDs1HdslPriorityBumping | read-write | deprecated | The 4 bytes represent the 32 time slots of the E1 frame. Each bit can be set to one, making the corresponding time slot a HIGH priority. Bits 16 and 32 cannot … |
| 1.3.6.1.4.1.164.3.4.4.2.1.1.2 | ColumnmodmPrtDs1Sync | read-write | current | The standard used for the time required for the E1 port to return to normal operation after local loss of synchronization. Default: itu(2). |
| 1.3.6.1.4.1.164.3.4.4.2.1.1.3 | ColumnmodmPrtDs1BpvLastMin | read-only | current | This object is applicable only for an E1 active port. It provides the number of BPV (BiPolar Violation) events detected during the last minute. |
| 1.3.6.1.4.1.164.3.4.4.2.1.1.4 | ColumnmodmPrtDs1BpvMax | read-only | current | This object is applicable only for an E1 active port. It provides the maximal number of BPV (BiPolar Violation) events (per minute), detected during the worst … |
| 1.3.6.1.4.1.164.3.4.4.2.1.1.5 | ColumnmodmPrtDs1LineLength | read-write | current | This attribute is the line length mask parameter used only for T1/DSU interfaces. len400p533ft=length range: 400ft to 533ft 'fcc68' - provides compliance with … |
| 1.3.6.1.4.1.164.3.4.4.2.1.1.6 | ColumnmodmPrtDs1CRCAvgError | read-only | current | Counts the average number of CRC error events per second. The average is updated every second |
| 1.3.6.1.4.1.164.3.4.4.2.1.1.7 | ColumnmodmPrtDs1DtsToRemote | read-write | current | This attribute indicates whether DTS (Dedicated TS) is transmitted to remote unit. |
| 1.3.6.1.4.1.164.3.4.4.3 | NodemodmHdslPort | |||
| 1.3.6.1.4.1.164.3.4.4.3.1 | TablemodmPrtHdslCurrentTable | not-accessible | current | The HDSL Current Table. The data collected is for the current 15-minute interval. |
| 1.3.6.1.4.1.164.3.4.4.3.1.1 | RowmodmPrtHdslCurrentEntry | not-accessible | current | An entry in the HDSL Current Table. This entry is per HDSL interface (LOOP1 or LOOP2). Each modem (Central/Remote) has a specific ifIndex value for the port, w… |
| 1.3.6.1.4.1.164.3.4.4.3.1.1.1 | ColumnmodmPrtHdslCurrentElapsedTime | read-only | current | The number of seconds that have elapsed since the beginning of the current error-measurement period. |
| 1.3.6.1.4.1.164.3.4.4.3.1.1.2 | ColumnmodmPrtHdslCurrentESs | read-only | current | The number of Errored Seconds encountered by an HDSL interface in the current 15 minute interval. An Errored Second is any second containing one or more Errore… |
| 1.3.6.1.4.1.164.3.4.4.3.1.1.3 | ColumnmodmPrtHdslCurrentSESs | read-only | current | The number of Severely Errored Seconds encountered by an HDSL interface in the current 15 minute interval. An SES is any second containing more than 30% Errore… |
| 1.3.6.1.4.1.164.3.4.4.3.1.1.4 | ColumnmodmPrtHdslCurrentBBEs | read-only | current | The number of Background Block Errors encountered by an HDSL interface in the current 15 minute interval. A BBE is an errored block not occurring as part of an… |
| 1.3.6.1.4.1.164.3.4.4.3.1.1.5 | ColumnmodmPrtHdslCurrentUASs | read-only | current | The number of Unavailable Seconds encountered by an HDSL interface in the current 15 minute interval. A UAS is any second in which a failed signal state exists… |
| 1.3.6.1.4.1.164.3.4.4.3.1.1.6 | ColumnmodmPrtHdslCurrentNoiseMargin | read-only | current | The current noise margin in DB. This object is not an accumulative one, therefore it's value will appear only in this table. |
| 1.3.6.1.4.1.164.3.4.4.3.1.1.7 | ColumnmodmPrtHdslCurrentAttenuation | read-only | current | The current attenuation in DB. This object is not an accumulative one, therefore it's value will appear only in this table. |
| 1.3.6.1.4.1.164.3.4.4.3.2 | TablemodmPrtHdslIntervalTable | not-accessible | current | The HDSL Interval Table. The data collected is for the last 96 completed 15-minute intervals. |
| 1.3.6.1.4.1.164.3.4.4.3.2.1 | RowmodmPrtHdslIntervalEntry | not-accessible | current | An entry in the HDSL Interval Table. This entry is per an HDSL interface (LOOP1 or LOOP2) and per 15 minute interval. The port and unit (Central/Remote) is ide… |
| 1.3.6.1.4.1.164.3.4.4.3.2.1.1 | ColumnmodmPrtHdslIntervalNumber | read-only | current | The number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming tha… |
| 1.3.6.1.4.1.164.3.4.4.3.2.1.2 | ColumnmodmPrtHdslIntervalESs | read-only | current | The number of Errored Seconds encountered by an HDSL interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.4.4.3.2.1.3 | ColumnmodmPrtHdslIntervalSESs | read-only | current | The number of Severely Errored Seconds encountered by an HDSL interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.4.4.3.2.1.4 | ColumnmodmPrtHdslIntervalBBEs | read-only | current | The number of Background Block Errors encountered by an HDSL interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.4.4.3.2.1.5 | ColumnmodmPrtHdslIntervalUASs | read-only | current | The number of Unavailable Seconds encountered by an HDSL interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.4.4.3.2.1.6 | ColumnmodmPrtHdslIntervalESR | read-only | current | The ratio of ESs to 900 seconds, encountered by an HDSL interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.4.4.3.2.1.7 | ColumnmodmPrtHdslIntervalSESR | read-only | current | The ratio of SESs to 900 seconds, encountered by an HDSL interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.4.4.3.2.1.8 | ColumnmodmPrtHdslIntervalBBER | read-only | current | The ratio of BBEs to 900 seconds, encountered by an HDSL interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.3.4.4.3.2.1.9 | ColumnmodmPrtHdslIntervalValidData | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.164.3.4.4.3.3 | TablemodmPrtHdslTotalTable | not-accessible | current | The HDSL Total Table. The data collected is the cumulative sum of the various statistics for the 24 hour period preceding the current interval. |
| 1.3.6.1.4.1.164.3.4.4.3.3.1 | RowmodmPrtHdslTotalEntry | not-accessible | current | An entry in the HDSL Total Table. This entry is per an HDSL interface (LOOP1 or LOOP2). The port and unit (Central/Remote) is identified by its specific ifInde… |
| 1.3.6.1.4.1.164.3.4.4.3.3.1.1 | ColumnmodmPrtHdslTotalValidIntervals | read-only | current | The number of previous intervals for which valid data was collected. The value will be 96 unless the interface was brought on-line within the last 24 hours, in… |
| 1.3.6.1.4.1.164.3.4.4.3.3.1.2 | ColumnmodmPrtHdslTotalESs | read-only | current | The number of Errored Seconds encountered by an HDSL interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.164.3.4.4.3.3.1.3 | ColumnmodmPrtHdslTotalSESs | read-only | current | The number of Severely Errored Seconds encountered by an HDSL interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.164.3.4.4.3.3.1.4 | ColumnmodmPrtHdslTotalBBEs | read-only | current | The number of Background Block Errors encountered by an HDSL interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.164.3.4.4.3.3.1.5 | ColumnmodmPrtHdslTotalUASs | read-only | current | The number of Unavailable Seconds encountered by an HDSL interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.164.3.4.4.3.4 | TablemodmPrtHdslTable | not-accessible | current | The HDSL Table. |
| 1.3.6.1.4.1.164.3.4.4.3.4.1 | RowmodmPrtHdslEntry | not-accessible | current | An entry in the HDSL Table. The port and unit (Central/Remote) is identified by its specific modmPrtHdslIndex value. |
| 1.3.6.1.4.1.164.3.4.4.3.4.1.1 | ColumnmodmPrtHdslIndex | read-only | current | The HDSL port index. In some cases it can equal ifIndex. |
| 1.3.6.1.4.1.164.3.4.4.3.4.1.2 | ColumnmodmPrtHdslDedicatedTs | read-only | current | The HDSL Current Dedicated TS. Valid values: 0..31. 255 = None (no dedicated TS). |
| 1.3.6.1.4.1.164.3.4.4.3.4.1.3 | ColumnmodmPrtHdslPriorityBumping | read-write | current | The 4 bytes represent time slots 0..31 of the E1 frame. Each bit can be set to '1', making the corresponding time slot a HIGH priority. Bit 0 is always HIGH (c… |
| 1.3.6.1.4.1.164.3.4.4.3.4.1.4 | ColumnmodmPrtHdslMngProtocol | read-write | current | A unique number to identify an Inband management over the link. |
| 1.3.6.1.4.1.164.3.4.4.3.4.1.5 | ColumnmodmPrtHdslRoutProtocol | read-write | current | Inband Mng Routing Protocol of the port. When modmPrtHdslMngProtocol is 'dedicatedPpp'-'proprietary' and 'rip2' are applicable. For other values - only 'propri… |
| 1.3.6.1.4.1.164.3.4.4.3.4.1.6 | ColumnmodmPrtHdslInbandMngRate | read-write | current | A unique number to identify the rate of the Inband management. It is applicable only when modmPrtHdslDedicatedTs <> (255 Or 0). |
| 1.3.6.1.4.1.164.3.4.4.3.4.1.7 | ColumnmodmPrtHdslPriorityBumpingEnable | read-write | current | This attribute indicates the Priority Bumping Mode. It is relevant only for 4W interfaces. |
| 1.3.6.1.4.1.164.3.4.4.3.4.1.8 | ColumnmodmPrtHdslPriorityBumpingTimeout | read-write | current | This attribute indicates the Priority Bumping Timeout in minutes. It is relevant only for 4W interfaces (2 lines of 2W each). Upon failure of one of the 2W lin… |
| 1.3.6.1.4.1.164.3.4.4.4 | NodemodmDtePort | |||
| 1.3.6.1.4.1.164.3.4.4.4.1 | TablemodmPrtDteTable | not-accessible | current | Configuration parameters of the Master and Slave Modem DTE Ports. The port and unit (Master/Slave) is identified by its specific modmPrtDteIndex value. |
| 1.3.6.1.4.1.164.3.4.4.4.1.1 | RowmodmPrtDteEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.4.4.4.1.1.1 | ColumnmodmPrtDteIndex | read-only | current | The DTE port index. |
| 1.3.6.1.4.1.164.3.4.4.4.1.1.2 | ColumnmodmPrtDteProtocol | read-write | current | The DTE port Protocol. |
| 1.3.6.1.4.1.164.3.4.4.4.1.1.3 | ColumnmodmPrtDteDataBits | read-write | current | The DTE number of data bits. |
| 1.3.6.1.4.1.164.3.4.4.4.1.1.4 | ColumnmodmPrtDteStopBits | read-write | current | The DTE minimum number of stop bits in the tx async frame. |
| 1.3.6.1.4.1.164.3.4.4.4.1.1.5 | ColumnmodmPrtDteRate | read-write | current | The DTE port rate. |
| 1.3.6.1.4.1.164.3.4.4.4.1.1.6 | ColumnmodmPrtDteCtsDelay | read-write | current | CTS/RTS delay, in msec. dxx = xx msec. notApplicable - for ASMi-31, ASMi-32. |
| 1.3.6.1.4.1.164.3.4.4.4.1.1.7 | ColumnmodmPrtDteParity | read-write | current | This attribute indicates the parity mode in async frame. |
| 1.3.6.1.4.1.164.3.4.4.4.1.1.8 | ColumnmodmPrtDteIfType | read-only | current | The interface type of the DTE port. |
| 1.3.6.1.4.1.164.3.4.4.4.1.1.9 | ColumnmodmPrtDteRlbEnable | read-write | current | Enable/Disable Remote Loop-Back on this modem, externally initiated. |
| 1.3.6.1.4.1.164.3.4.4.4.1.1.10 | ColumnmodmPrtDteAlbEnable | read-write | current | Enable/Disable Analog Loop-Back on this modem, externally initiated. |
| 1.3.6.1.4.1.164.3.4.4.4.1.1.11 | ColumnmodmPrtDteRtsDcdEnable | read-write | current | Enable/Disable RTS-DCD. |
| 1.3.6.1.4.1.164.3.4.4.4.1.1.12 | ColumnmodmPrtDteDsrDtrEnable | read-write | current | Enable/Disable DSR-DTR. |
| 1.3.6.1.4.1.164.3.4.4.4.1.1.13 | ColumnmodmPrtDteSignaling | read-only | current | Each bit represents a specific signal state. 1 - means : signal is ON , Enabled, Yes (exists) 0 - means : signal is OFF, Disabled, No . For detailed bit assign… |
| 1.3.6.1.4.1.164.3.4.4.4.1.1.14 | ColumnmodmPrtDteLoops | read-write | current | Loops that can be run on the DTE port. none - no loop (stop running loop) ana - Local Analog Line loop rem - Remote Analog Line loop anaAndBert - ana & BERT to… |
| 1.3.6.1.4.1.164.3.4.4.4.1.1.15 | ColumnmodmPrtDteTests | read-write | current | This is a mask which indicates - for Get: which tests are running on the DTE port. - for Set: tests the user wishes to start or stop. Each test has its specifi… |
| 1.3.6.1.4.1.164.3.4.4.4.1.1.16 | ColumnmodmPrtDteClearAllTests | read-write | current | Setting this attribute to on, clears all the running loops and tests of the DTE port. Upon completion, the value will automatically change to off(2). |
| 1.3.6.1.4.1.164.3.4.4.4.1.1.17 | ColumnmodmPrtDteBertResult | read-only | current | Result of BERT for the selected DTE port. Applicable only if BERT is running on the DTE port. |
| 1.3.6.1.4.1.164.3.4.4.4.1.1.18 | ColumnmodmPrtDteErrCorrect | read-write | current | notApplicable - for modems that do not support this object on - will start a random error correction process. onBurst - will start a burst error correction pro… |
| 1.3.6.1.4.1.164.3.4.4.4.1.1.19 | ColumnmodmPrtDteV54DigitalTest | read-write | current | Enables to start a remote digital loopback upon recognition of a special pattern. disable - will not start a digital loopback when a special pattern is recogni… |
| 1.3.6.1.4.1.164.3.4.4.4.1.1.20 | ColumnmodmPrtDteV54DigitalTestStatus | read-only | current | Indicates whether a remote digital test was triggered by a pattern by the remote modem or not. no - the digital test wasn't triggered by a pattern by the remot… |
| 1.3.6.1.4.1.164.3.4.4.4.1.1.21 | ColumnmodmPrtDteTestTimeOut | read-write | current | Indicates the timeout for LLB test. 0=Forever |
| 1.3.6.1.4.1.164.3.4.4.4.1.1.22 | ColumnmodmPrtDteAlarmForwarding | read-write | current | This MIB object defines whether to enable or disable Alarm Forwarding for this port. It means whether this port will be affected by the failure of its respecti… |
| 1.3.6.1.4.1.164.3.4.4.5 | NodemodmLinePort | |||
| 1.3.6.1.4.1.164.3.4.4.5.1 | TablemodmPrtLineTable | not-accessible | current | Configuration parameters of the Master and Slave Modem Line Ports. The port and unit (Master/Slave) is identified by its specific modmPrtLineIndex value. |
| 1.3.6.1.4.1.164.3.4.4.5.1.1 | RowmodmPrtLineEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.4.4.5.1.1.1 | ColumnmodmPrtLineIndex | read-only | current | The Line port index. |
| 1.3.6.1.4.1.164.3.4.4.5.1.1.2 | ColumnmodmPrtLineClkSrc | read-write | current | The clock source of the Line port. (5),(6) - applicable only for ASMi-24 and ASMi-50. (7),(8) - System level Clock Source. Applicable to CQ modems. |
| 1.3.6.1.4.1.164.3.4.4.5.1.1.3 | ColumnmodmPrtLineTxLevel | read-write | current | Transmit level in dBm. pxx = positive xx = +xx nxx = negative xx = -xx |
| 1.3.6.1.4.1.164.3.4.4.5.1.1.4 | ColumnmodmPrtLineRxLevel | read-write | current | Rx Sensitivity in dBm. pxx = positive xx = +xx nxx = negative xx = -xx. |
| 1.3.6.1.4.1.164.3.4.4.5.1.1.5 | ColumnmodmPrtLineOutImp | read-write | current | Output impedance in Ohm. |
| 1.3.6.1.4.1.164.3.4.4.5.1.1.6 | ColumnmodmPrtLineInImp | read-write | current | Input impedance in Ohm. |
| 1.3.6.1.4.1.164.3.4.4.5.1.1.7 | ColumnmodmPrtLineCarrCntrl | read-write | current | Carrier control. |
| 1.3.6.1.4.1.164.3.4.4.5.1.1.8 | ColumnmodmPrtLineRAP | read-write | current | Rate Adapting Protocol. privateV110Enable (4)= private but enables return to v110. |
| 1.3.6.1.4.1.164.3.4.4.5.1.1.9 | ColumnmodmPrtLineWaveLength | read-only | current | Wave Length of the optical Line. notApplicable - when the modem Line is not optical. The units are nano-meters [nm]. |
| 1.3.6.1.4.1.164.3.4.4.5.1.1.10 | ColumnmodmPrtLineCdSense | read-write | current | Carrier Detect Sense - Detection Sensitivity of Carrier Wave. high - high sensitivity low - low sensitivity. |
| 1.3.6.1.4.1.164.3.4.4.5.1.1.11 | ColumnmodmPrtLineAIS | read-write | current | AIS enable/disable. notApplicable - for modems that do not support this feature. |
| 1.3.6.1.4.1.164.3.4.4.5.1.1.12 | ColumnmodmPrtLineCoding | read-write | current | Line Coding. |
| 1.3.6.1.4.1.164.3.4.4.5.1.1.13 | ColumnmodmPrtLineLength | read-write | current | This attribute is the line length mask parameter used only for T1/DSU interfaces. len400p533ft=length range: 400ft to 533ft. |
| 1.3.6.1.4.1.164.3.4.4.5.1.1.14 | ColumnmodmPrtLineClkSrcPort | read-write | current | Clock Source Port. This parameter is relevant for external clock source. |
| 1.3.6.1.4.1.164.3.4.4.5.1.1.15 | ColumnmodmPrtLineDteClkConfig | read-write | current | Indicates the clock source of the modems, which were not selected to supply the external clock. |
| 1.3.6.1.4.1.164.3.4.4.5.1.1.16 | ColumnmodmPrtLineMaskAlr | read-write | current | This parameter determine whether masking or not the alarms for this line. |
| 1.3.6.1.4.1.164.3.5 | Nodeoptimux | |||
| 1.3.6.1.4.1.164.3.5.0 | IdentityoptimuxEvents | current | The events for Optimux. | |
| 1.3.6.1.4.1.164.3.5.0.1 | NotificationoptMxConfigChange | current | The trap is sent every time there is a change in the state of one of the PS.. | |
| 1.3.6.1.4.1.164.3.5.0.2 | NotificationoptMxAgentFault | current | The trap is sent every time there is a change in the agnIndication variable. For Optimux XL family, from ver 4.1 and up, this trap should be sent upon any chan… | |
| 1.3.6.1.4.1.164.3.5.0.3 | NotificationoptLineStatusChange | current | optLineStatusChange trap is sent when the value of an instance dsx1LineStatus changes. It can be utilized by an NMS to trigger polls. When the line status chan… | |
| 1.3.6.1.4.1.164.3.5.0.4 | NotificationoptSlotChange | current | This trap alerts the console if there is module enrollement/de-enrollement | |
| 1.3.6.1.4.1.164.3.5.0.5 | NotificationoptLoopbackStatusChange | current | This trap alerts the console if there is changes in the loopback status of some of the line. | |
| 1.3.6.1.4.1.164.3.5.0.6 | NotificationoptXlLineStatusChange | current | optXlLineStatusChange trap is sent when the value of an instance dsx1LineStatus changes. It can be utilized by an NMS to trigger polls. | |
| 1.3.6.1.4.1.164.3.5.0.7 | NotificationoptRingActiveModeChange | current | optRingActiveModeChange trap is sent when the value of optRingActiveMode changes. | |
| 1.3.6.1.4.1.164.3.5.0.8 | NotificationoptActiveLinkFlipTrap | current | The trap is sent upon change of Active link module. | |
| 1.3.6.1.4.1.164.3.5.1 | TableoptMxConfigTable | not-accessible | current | This table contains parameters of configuration for each member of the couple of Optimux. |
| 1.3.6.1.4.1.164.3.5.1.1 | RowoptMxConfigEntry | not-accessible | current | An entry in the Optimux Config table. |
| 1.3.6.1.4.1.164.3.5.1.1.1 | ColumnoptIndex | read-only | current | optIndex = 1 is for local Optimux. optIndex = 2 is for remote Optimux. |
| 1.3.6.1.4.1.164.3.5.1.1.2 | ColumnoptHWVersion | read-only | current | HW Version of the device. |
| 1.3.6.1.4.1.164.3.5.1.1.3 | ColumnoptSWVersion | read-only | current | SW Version of the device. |
| 1.3.6.1.4.1.164.3.5.1.1.4 | ColumnoptPSPrimary | read-only | current | The status of the primary Power Supply Unit. |
| 1.3.6.1.4.1.164.3.5.1.1.5 | ColumnoptPSSecondary | read-only | current | The status of the secondary Power Supply Unit. |
| 1.3.6.1.4.1.164.3.5.1.1.6 | ColumnoptLinkActive | read-only | current | This object indicates which link is active. For Optimux-4 it may be: 5, 6 or 105, 106 For FOMi-E3/T3 it may be: 51, 61 or 151, 161. For Optimux-T3 it may be: 5… |
| 1.3.6.1.4.1.164.3.5.1.1.7 | ColumnoptSelectLink | read-write | current | This object is used by Optimuxes. - For Optimux 4E1/T1 Old Look: This MIB object enables the user to force the device to use specific link. autoredundancy= Mai… |
| 1.3.6.1.4.1.164.3.5.1.1.8 | ColumnoptGrpPayLoadLoop | read-write | current | Performs payload loop ( remote loop) to 4 E1 channels at once. |
| 1.3.6.1.4.1.164.3.5.1.1.9 | ColumnoptGrpClockSource | read-write | current | For Optimux XL: If dsx3TransmitClockSource = localTiming(2), then the user can configure this field as: localInternal(2) = use the internal clock of the device… |
| 1.3.6.1.4.1.164.3.5.1.1.10 | ColumnoptRedundancyStatus | read-only | current | If there are two modules 'links', then this field should be set to available(2). If there is only one module 'link', this field should be set to notAvailable(3… |
| 1.3.6.1.4.1.164.3.5.1.1.11 | ColumnoptRedundancyCnf | read-write | current | This object is used by Optimux-XL, FomiE3/T3, Optimux-T3 and Optimux-155. For Optimux-XL: If optRedundancyStatus = notAvailable(3), then this field can be off(… |
| 1.3.6.1.4.1.164.3.5.1.1.12 | ColumnoptFarEndType | read-only | current | Far-End type of product. This object is especially relevant for the local optimux. notApplicable - for devices that don't have a far-end unit. |
| 1.3.6.1.4.1.164.3.5.1.1.13 | ColumnoptServiceChEnable | read-write | current | Service Channel Enable/Disable for each Optimux (local/remote). |
| 1.3.6.1.4.1.164.3.5.1.1.14 | ColumnoptMaskChAlr | read-write | current | Mask Channel Alarm. This object is applicable only for Optimux cards. The value of this object is a sum of 2**n, where n is a bit assigned to a certain Channel… |
| 1.3.6.1.4.1.164.3.5.1.1.15 | ColumnoptAisEnable | read-write | current | AIS enable/disable. notApplicable - for devices that do not support this feature. |
| 1.3.6.1.4.1.164.3.5.1.1.16 | ColumnoptFarMng | read-write | current | This object is used by Optimux-XL and FomiE3/T3. Is there possibility of Far-End Management (no/yes). This object is applicable only for the Local device. notA… |
| 1.3.6.1.4.1.164.3.5.1.1.17 | ColumnoptClockDivision | read-write | current | This object is applicable only for FomiE3/T3 having an HSSI Electrical interface. It gives the possibility of Clock Division, so that Clock Rate will be less t… |
| 1.3.6.1.4.1.164.3.5.1.1.18 | ColumnoptDteLoopEnable | read-write | current | DTE Loop enable/disable (for example loop command requested by router). This object is applicable only for products having HSSI interface. notApplicable - for … |
| 1.3.6.1.4.1.164.3.5.1.1.19 | ColumnoptGrpClockSourcePrt | read-write | current | This object is applicable for Optimux-T3, when optGrpClockSource=localExternal. It enables the user to select the Channel or Station Clock from which the Clock… |
| 1.3.6.1.4.1.164.3.5.1.1.20 | ColumnoptIncomingAlarm | read-only | current | State of the Incoming Alarm (On/Off), via Alarm Relay connector. This object is applicable only for Optimux-T3. |
| 1.3.6.1.4.1.164.3.5.1.1.21 | ColumnoptDefChannelSet | read-write | current | Default configuration for all Optimux Channels: T1 or E1. This object is applicable only for Optimux-T3. |
| 1.3.6.1.4.1.164.3.5.1.1.22 | ColumnoptWaitToRestore | read-write | current | This parameter defines the time (sec) device has to wait in the redundant state until it goes back to the default Link. |
| 1.3.6.1.4.1.164.3.5.1.1.23 | ColumnoptEnforcedLink | read-write | current | This parameter is not applicable when optRedundancyCnf = off. It enables user to enforce a Link in spite of the redundancy mechanism. Selecting the noEnforceme… |
| 1.3.6.1.4.1.164.3.5.1.1.24 | ColumnoptFlipUponEvent | read-write | current | This object allows user to define if Flip to the other port will be performed (or not), for certain possible events. Each event is represented by a bit. The va… |
| 1.3.6.1.4.1.164.3.5.1.1.25 | ColumnoptHwMaskChAlr | read-only | current | Mask Channel Alarm done by the HW dip-switches. This object is applicable only for Optimux cards. The value of this object is a sum of 2**n, where n is a bit a… |
| 1.3.6.1.4.1.164.3.5.1.1.26 | ColumnoptServiceChExist | read-only | current | Service Channel Existence indication for each Optimux (local/remote). |
| 1.3.6.1.4.1.164.3.5.1.1.27 | ColumnoptMaskSystemAlr | read-write | current | Mask all system alarms for each Optimux (local/remote). |
| 1.3.6.1.4.1.164.3.5.2 | TableoptMxModuleTable | not-accessible | current | This table defines the type of the module enrolled in each slot. |
| 1.3.6.1.4.1.164.3.5.2.1 | RowoptMxModuleEntry | not-accessible | current | An entry in the Optimux Module table. |
| 1.3.6.1.4.1.164.3.5.2.1.1 | ColumnoptMdIdx | read-only | current | optMdIdx = 1 is for local Optimux. optMdIdx = 2 is for remote Optimux. |
| 1.3.6.1.4.1.164.3.5.2.1.2 | ColumnoptMdSltIdx | read-only | current | For Optimux XL: Slot A = 1, Slot B = 2, Slot C = 3, Slot D = 4, Slot Link = 5, Slot BU = 6 . For FomiE3/R3: Slot of Station Clock = 3, Slot of Electrical Link … |
| 1.3.6.1.4.1.164.3.5.2.1.3 | ColumnoptMdType | read-only | current | Module Type and number of connectors. |
| 1.3.6.1.4.1.164.3.5.2.1.4 | ColumnoptMdHWVersion | read-only | current | HW Version of the module. |
| 1.3.6.1.4.1.164.3.5.2.1.5 | ColumnoptMdModLed | read-only | current | The meaning of each bit depends on the module type. |
| 1.3.6.1.4.1.164.3.5.2.1.6 | ColumnoptMdWaveLength | read-only | current | Wave Length of T3/E3 Optical Links in [nm] and specification if Laser or not. |
| 1.3.6.1.4.1.164.3.5.2.1.7 | ColumnoptMdTimingMode | read-write | current | The Module Timing mode. |
| 1.3.6.1.4.1.164.3.5.2.1.8 | ColumnoptMdStatusIndication | read-only | current | Indication of Alarm and test status of all interfaces served by a module. For Optimux155, Each interface will be represented by 2 bits where the 1st bit (right… |
| 1.3.6.1.4.1.164.3.5.3 | NodeoptimuxRing | |||
| 1.3.6.1.4.1.164.3.5.3.1 | TableoptFramerPortTable | not-accessible | current | This table defines the connection of every ch of the framer. |
| 1.3.6.1.4.1.164.3.5.3.1.1 | RowoptFramerPortEntry | not-accessible | current | An entry in the Optimux Framer port Connections table. |
| 1.3.6.1.4.1.164.3.5.3.1.1.1 | ColumnoptFramerPortIdx | read-only | current | The channel of the Framer. Valid values:1..31. |
| 1.3.6.1.4.1.164.3.5.3.1.1.2 | ColumnoptFramerPortConn | read-write | current | This parameter defines the Framer channel connection. The values will be as follows: Loop(1),Ch1(2),Ch2(3)....,Ch28(29). |
| 1.3.6.1.4.1.164.3.5.3.1.1.3 | ColumnoptFramerPortType | read-write | current | This parameter defines the Framer port (E1 or T1). |
| 1.3.6.1.4.1.164.3.5.3.1.1.4 | ColumnoptFramerPortFeIpAddr | read-write | current | The IP Address of the opposite optimux in the ring,which this channel connected to. |
| 1.3.6.1.4.1.164.3.5.3.2 | ScalaroptFramerConnChanges | read-write | current | The number of changes in Framer connection table that occured since last time there was a reset to this parameter |
| 1.3.6.1.4.1.164.3.5.3.3 | ScalaroptRing | read-only | current | Indication about Optimux special behavior: pointToPoint(2): regular operation mode (Point to Point). ring(3): this optimux is part of a ring. operations made o… |
| 1.3.6.1.4.1.164.3.5.3.4 | TableoptRingNeTable | not-accessible | current | This table defines which optimuxes are in the ring and the IP Address of each one. |
| 1.3.6.1.4.1.164.3.5.3.4.1 | RowoptRingNeEntry | not-accessible | current | An entry in the Optimux Ring Connections table. |
| 1.3.6.1.4.1.164.3.5.3.4.1.1 | ColumnoptRingNeIdx | read-only | current | The index of the optimux, starting with next optimux to the current optimux. Valid values:1..28. The index is according to the order of optimux connections in … |
| 1.3.6.1.4.1.164.3.5.3.4.1.2 | ColumnoptRingNeIpAddr | read-only | current | The IP Address of each optimux in the ring, according to optRingNeIdx. |
| 1.3.6.1.4.1.164.3.5.3.5 | ScalaroptRingActiveMode | read-only | current | This parameter indicates whether the Ring works in Main or Backup mode. |
| 1.3.6.1.4.1.164.3.6 | Nodekmux | |||
| 1.3.6.1.4.1.164.3.6.1 | NodesystemKmux | |||
| 1.3.6.1.4.1.164.3.6.1.1 | NodegeneralKmux | |||
| 1.3.6.1.4.1.164.3.6.1.1.1 | TablesysGenKmuxTable | not-accessible | current | A table containing the general Kmux parameters. |
| 1.3.6.1.4.1.164.3.6.1.1.1.1 | RowsysGenKmuxEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.6.1.1.1.1.1 | ColumnsysGenConfigIdx | read-only | current | This object indicates the Configuration number (1..255) referred. Value of 255 specifies the TmpCnfg (Scratch). The write operation in this Table is valid only… |
| 1.3.6.1.4.1.164.3.6.1.1.1.1.2 | ColumnsysGenFlipIntegration | read-write | current | The parameter is relevant only for KM-2100 and only when sysGenMlMode=redundancy, switchBackup, or priorityBumping. |
| 1.3.6.1.4.1.164.3.6.1.1.1.1.3 | ColumnsysGenMlMode | read-write | current | The Main Link operation mode. Determines how many links are used (one/two) and how they are used. |
| 1.3.6.1.4.1.164.3.6.1.1.1.1.4 | ColumnsysGenFaType | read-write | current | Frame Allocation type: auto - automatic frame allocation (by Kmux) manual - manually configured frame allocation (by user). |
| 1.3.6.1.4.1.164.3.6.1.1.1.1.5 | ColumnsysGenLinkRecovery | read-write | current | The parameter determines the Link Recovery mode. The parameter is relevant only when the sysGenMlMode is either switchBackup or priorityBumping. |
| 1.3.6.1.4.1.164.3.6.1.1.1.1.6 | ColumnsysGenLinkSourceClock | read-write | current | The source clock for the links. The parameter is relevant only for KM-2100 having a KDI or KDI/CH cards. ML-A or ML-B are selectable only when sysGenMlMode=dua… |
| 1.3.6.1.4.1.164.3.6.1.1.1.1.7 | ColumnsysGenMngBwA | read-write | current | The required management rate for ML-A, in bps. It is very important when a remote unit is managed. The selected value must be < ML-A Rate value. 0 = None or no… |
| 1.3.6.1.4.1.164.3.6.1.1.1.1.8 | ColumnsysGenMngBwB | read-write | current | The required management rate for ML-B, in bps. It is very important when a remote unit is managed. The selected value must be < ML-B Rate value. 0 = None or no… |
| 1.3.6.1.4.1.164.3.6.1.1.1.1.9 | ColumnsysGenAutoDialSlot | read-write | current | This object indicates the IO-SLOTs that can be used to initiate Automatic DialUp. This field will be applicable when KML.10 is a ML and its prtIsdnSwitchMode=a… |
| 1.3.6.1.4.1.164.3.6.1.1.1.1.10 | ColumnsysGenResetBypassEnable | read-write | current | Enable/Disable Reset Bypass operation when a KDI card exists and one of its links failed. notApplicable - when no KDI card exists in the Hub. |
| 1.3.6.1.4.1.164.3.6.1.1.1.1.11 | ColumnsysGenRebuildFrame | read-write | current | How to rebuild frame (when a CH is connected/disconnected): automatically - immediately, by automatic frame allocation (by Kmux) manually - manually configured… |
| 1.3.6.1.4.1.164.3.6.1.1.2 | ScalarsysGenLinkRecoveryCmd | read-write | current | Command to recover from ML failure. When 'on', the agent will perform manual link recovery and reset the variable to 'off'. The conditions for this action are:… |
| 1.3.6.1.4.1.164.3.6.1.1.3 | ScalarsysGenFlipMlCmd | read-write | current | Command to flip the ML when sysGenMlMode=redundancy. When 'on', the agent will flip the ML and reset the variable to 'off'. |
| 1.3.6.1.4.1.164.3.6.1.1.4 | ScalarsysGenMonitorChannel | read-write | current | The variable specifies the channel to be monitored and presented on the front panel LEDs. The channel will be specified according to: Slot*100+Ch. 0 - no monit… |
| 1.3.6.1.4.1.164.3.6.1.2 | NodestatusKmux | |||
| 1.3.6.1.4.1.164.3.6.1.2.1 | ScalarsysStatusOnLineML | read-only | current | The main links which are online. |
| 1.3.6.1.4.1.164.3.6.1.2.2 | ScalarsysKmuxStatus | read-only | current | A BIT string indicating the system status as follows On - the bit is set to '1': Bit 0 (LSB): Alarm Relay. Bit 1: SP param. Off- Configure the SP port from the… |
| 1.3.6.1.4.1.164.3.6.1.2.3 | ScalarsysKmuxOffset | read-only | current | 'on' - slots 1..4 of KM-2104 match slots 11..14 of KM-2100. 'off'- slots 1..4 of KM-2104 match slots 7..10 of KM-2100. notApplicable - for KM-2100. |
| 1.3.6.1.4.1.164.3.6.1.3 | NodebackupKmux | |||
| 1.3.6.1.4.1.164.3.6.1.3.1 | TablesysBackupTable | not-accessible | current | A table containing the backup parameters. |
| 1.3.6.1.4.1.164.3.6.1.3.1.1 | RowsysBackupEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.6.1.3.1.1.1 | ColumnsysBackupConfigIdx | read-only | current | This object indicates the Configuration number (1..255) referred. Value of 255 specifies the TmpCnfg (Scratch). |
| 1.3.6.1.4.1.164.3.6.1.3.1.1.2 | ColumnsysBackupDatabase | read-write | current | Determines the database to switch to, when ML recovery occurs. |
| 1.3.6.1.4.1.164.3.6.1.3.1.1.3 | ColumnsysBackupMode | read-write | current | isdn - for connection to ISDN network. pstn - for connection to PSTN network. |
| 1.3.6.1.4.1.164.3.6.1.3.1.1.4 | ColumnsysBackupDialTimeout | read-write | current | The dial timeout in seconds (when backup is attempted). |
| 1.3.6.1.4.1.164.3.6.1.3.1.1.5 | ColumnsysBackupOptions | read-write | current | The Backup options: noBackup - No backup is applicable line - Line Data backup path - Line Mng backup . |
| 1.3.6.1.4.1.164.3.6.1.3.2 | TablesysBackupAgendaTable | not-accessible | current | A table containing the backup schedule. It is possible to define 4 different time zone schedules per day of the week. |
| 1.3.6.1.4.1.164.3.6.1.3.2.1 | RowsysBackupAgendaEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.6.1.3.2.1.1 | ColumnsysBackupCfgIdx | read-only | current | This object indicates the Configuration number (1,255) referred. Write operation for the table entries is allowed only to the temporary configuration (255). |
| 1.3.6.1.4.1.164.3.6.1.3.2.1.2 | ColumnsysBackupDay | read-only | current | Day of the week. |
| 1.3.6.1.4.1.164.3.6.1.3.2.1.3 | ColumnsysBackupZone | read-only | current | The time zone. |
| 1.3.6.1.4.1.164.3.6.1.3.2.1.4 | ColumnsysBackupEndTime | read-write | current | The end time for this time zone. The format is HH:MM. For example 23:59. For Zone 4, End Time = 23:59 (constant). |
| 1.3.6.1.4.1.164.3.6.1.3.2.1.5 | ColumnsysBackupStatus | read-write | current | Enable or disable this backup schedule entry. |
| 1.3.6.1.4.1.164.3.6.1.4 | NodeframeAllocationKmux | |||
| 1.3.6.1.4.1.164.3.6.1.4.1 | TablesysFrameAllocationTable | not-accessible | current | A table for manually configuring the frame allocation. The table will contain always all the programmed cards' ports. sysFaNumOfBits |
| 1.3.6.1.4.1.164.3.6.1.4.1.1 | RowsysFrameAllocationEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.6.1.4.1.1.1 | ColumnsysFaConfigIdx | read-only | current | This object indicates the Configuration number (1..255) referred. Value of 255 specifies the TmpCnfg (Scratch). Write operation for the table entries is allowe… |
| 1.3.6.1.4.1.164.3.6.1.4.1.1.2 | ColumnsysFaLink | read-only | current | The main link on which frame allocation is done. |
| 1.3.6.1.4.1.164.3.6.1.4.1.1.3 | ColumnsysFaPrt | read-only | current | The Frame Allocation (FA) port. The ports will be specified by: Slot*100+Ch. - for Bypass of KDI or KDI/CH the port will be: Slot*100+11 (internal-1=non-existe… |
| 1.3.6.1.4.1.164.3.6.1.4.1.1.4 | ColumnsysFaStartingBit | read-write | current | The data starting bit for the channel. - for Bypass of KDI or KDI/CH, this will be the Starting Bit of the Bypass Window on the specific sysFaLink. - for Contr… |
| 1.3.6.1.4.1.164.3.6.1.4.1.1.5 | ColumnsysFaNumOfBits | read-write | current | The data size in number of bits for the channel. - for Bypass of KDI or KDI/CH, this will be the Bypass Window size. In this case, this value must be the same … |
| 1.3.6.1.4.1.164.3.6.1.5 | TablesysDisconnectSupervisionEventTable | not-accessible | current | Disconnect Supervision Event table. |
| 1.3.6.1.4.1.164.3.6.1.5.1 | RowsysDisconnectSupervisionEventEntry | not-accessible | current | An entry in the table. |
| 1.3.6.1.4.1.164.3.6.1.5.1.1 | ColumnsysDsEventIdx | read-only | current | This object indicates a unique Event Index. |
| 1.3.6.1.4.1.164.3.6.1.5.1.2 | ColumnsysDsEventSlot | read-only | current | This object indicates a unique number of the slot position, where the KVF.6 or KVF.8 card is inserted, and the Disconnect Supervision Event occurred. |
| 1.3.6.1.4.1.164.3.6.1.5.1.3 | ColumnsysDsEventTS | read-only | current | This object defines the Time Slot number, where the Disconnect Supervision Event occurred. |
| 1.3.6.1.4.1.164.3.6.1.5.1.4 | ColumnsysDsEventDescr | read-only | current | This object defines the Description of the Disconnect Supervision Event. |
| 1.3.6.1.4.1.164.3.6.1.5.1.5 | ColumnsysDsEventDateAndTime | read-only | current | This object defines the Date and Time, when the Disconnect Supervision Event occurred. It will be displayed in the following format: YYYY-MM-DD HH:MM:SS. |
| 1.3.6.1.4.1.164.3.6.2 | NodemdlKmux | |||
| 1.3.6.1.4.1.164.3.6.2.2 | TablemdlKmxTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.6.2.2.1 | RowmdlKmxEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.6.2.2.1.1 | ColumnmdlKmxConfigIdx | read-only | current | This object indicates the Configuration number (1..255) referred. Value of 255 specifies the TmpCnfg (Scratch). Write operation for the table entries is allowe… |
| 1.3.6.1.4.1.164.3.6.2.2.1.2 | ColumnmdlKmxSlotIdx | read-only | current | This object indicates a unique number of the slot position in which the module is inserted. |
| 1.3.6.1.4.1.164.3.6.2.2.1.3 | ColumnmdlKmxOperatedMl | read-write | current | The main link for this card. The field is relevant only for ML modes of Dual, Priority Bumping and Switched Backup. |
| 1.3.6.1.4.1.164.3.6.2.2.1.4 | ColumnmdlKmxMlAtoMlBPrio | read-write | current | ML-A to ML-B Priority. The field is relevant only for ML modes of Priority Bumping and Switched Backup. |
| 1.3.6.1.4.1.164.3.6.2.2.1.5 | ColumnmdlKmxMlBtoMlAPrio | read-write | current | ML-B to ML-A Priority. The field is relevant only for ML modes of Priority Bumping. |
| 1.3.6.1.4.1.164.3.6.2.2.1.6 | ColumnmdlKmxOutSrvMethod | read-write | current | Out of service method. For KVC.1 and KVC.1M all values are applicable. For KVC.2, KVC.3, KVF.1, KVF.3, KVF.4: only forcedIdle and forcedBusy are applicable. |
| 1.3.6.1.4.1.164.3.6.2.2.1.7 | ColumnmdlKmxV54Config | read-write | current | Relevant only for KLS.1/New card. |
| 1.3.6.1.4.1.164.3.6.2.2.1.8 | ColumnmdlKmxTiming | read-only | current | Applicable only for KHSU.1, KHSU.2, KVF.4/S0, KVC.3/S0 cards. lt - local timing nt - network timing te - terminal equipment |
| 1.3.6.1.4.1.164.3.6.2.2.1.9 | ColumnmdlKmxIsdnDisconnectCause | read-only | current | This attribute indicates the cause of the ISDN Disconnection for the card installed in the specific slot position. The value can be 0..255. The numeric values … |
| 1.3.6.1.4.1.164.3.6.2.2.1.10 | ColumnmdlKmxIsdnCallStatus | read-only | current | This attribute indicates the current ISDN Call Status for the card installed in the specific slot position. |
| 1.3.6.1.4.1.164.3.6.2.2.1.11 | ColumnmdlKmxIsdnLayer1State | read-only | current | This attribute indicates the ISDN Layer 1 State for the card installed in the specific slot position. |
| 1.3.6.1.4.1.164.3.6.2.2.1.12 | ColumnmdlKmxIsdnLayer2State | read-only | current | This attribute indicates the ISDN Layer 2 State for the card installed in the specific slot position. |
| 1.3.6.1.4.1.164.3.6.2.3 | TablemdlKvf5PbxTable | not-accessible | current | Parameters specific to KVF.5, KVF.6 and KVF.8 PBX cards. |
| 1.3.6.1.4.1.164.3.6.2.3.1 | RowmdlKvf5PbxEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.6.2.3.1.1 | ColumnmdlKvf5PbxConfigIdx | read-only | current | This object indicates the Configuration number (1..255) referred. Value of 255 specifies the TmpCnfg (Scratch). Write operation for the table entries is allowe… |
| 1.3.6.1.4.1.164.3.6.2.3.1.2 | ColumnmdlKvf5PbxSlotIdx | read-only | current | This object indicates a unique number of the slot position in which the module is inserted. |
| 1.3.6.1.4.1.164.3.6.2.3.1.3 | ColumnmdlKvf5PbxSig | read-write | current | Signaling type. When 'mdlKvf5PbxSig' is valid, 'mdlKvf5PbxSigTxPbx' and 'mdlKvf5PbxSigRxPbx' are not valid. mdlKvf5PbxSig - is supported by KVF.5 OLD SW ver an… |
| 1.3.6.1.4.1.164.3.6.2.3.1.4 | ColumnmdlKvf5PbxSigMode | read-write | current | Signaling Mode. |
| 1.3.6.1.4.1.164.3.6.2.3.1.5 | ColumnmdlKvf5PbxTsAssign | read-write | current | Ts Assignment group. Each KVF.5 card of the Mux should have a different value. For KVF.5/E1 values: 2,3,4,8,9,10,11,12 are applicable. For KVF.5/T1 values: 2,3… |
| 1.3.6.1.4.1.164.3.6.2.3.1.6 | ColumnmdlKvf5PbxCcsTs | read-write | current | CCS TS of the KVF.5/T1/E1 and KVF.6/T1/E1 card. It is applicable for Kmux KVF.5 Framer cards and KVF.6 cards when mdlKvf5PbxSig=ccs. Valid values: 1..24 - CCS … |
| 1.3.6.1.4.1.164.3.6.2.3.1.7 | ColumnmdlKvf5PbxOos | read-write | current | 'idle' = '0' = on-hook, idle state 'busy' = '1' = off-hook, busy state 'forcedIdle' = SP = both A and B signaling bits are forced to '0' during out-of-service … |
| 1.3.6.1.4.1.164.3.6.2.3.1.8 | ColumnmdlKvf5PbxSigTxPbx | read-write | current | TxPbx signaling means transmit signaling from KM to PBX (KM When 'mdlKvf5PbxSigTxPbx' is valid, 'mdlKvf5PbxSig' field is not valid. mdlKvf5PbxSig - is supporte… |
| 1.3.6.1.4.1.164.3.6.2.3.1.9 | ColumnmdlKvf5PbxSigRxPbx | read-write | current | RxPbx signaling means receive signaling from PBX to KM (PBX When 'mdlKvf5PbxSigRxPbx' is valid, 'mdlKvf5PbxSig' field is not valid. mdlKvf5PbxSig - is supporte… |
| 1.3.6.1.4.1.164.3.6.2.3.1.10 | ColumnmdlKvf5PbxDefABCD | read-write | current | This object determines what KM will send for the ABCD Bits that are not 'filled' by the dynamic signaling. This field is applicable only for signaling transmit… |
| 1.3.6.1.4.1.164.3.6.2.3.1.11 | ColumnmdlKvf5PbxFramerSlot | read-write | current | This object indicates the Framer's slot number this card belongs to. Several cards having the same mdlKvf5PbxFramerSlot value, work together as a group. |
| 1.3.6.1.4.1.164.3.6.2.3.1.12 | ColumnmdlKvf5PbxCcsRate | read-write | current | Determines the Ccs speed - for KVF.6 and KVF.5 cards. |
| 1.3.6.1.4.1.164.3.6.2.3.1.13 | ColumnmdlKvf5PbxTxAbcdBit | read-write | current | This object is applicable only for KVF.6 and KVF.8 cards, when mdlKvf5PbxSig=cas(6). It represents 4 parameters, by 2 Octets : D Bit Code-MSB nibble, C Bit Cod… |
| 1.3.6.1.4.1.164.3.6.2.3.1.14 | ColumnmdlKvf5PbxHdlcCrc | read-write | current | Determines the CRC type of HDLC protocol, that CCS signaling is working with. Applicable for KVF.6 cards when Signaling is CCS (only). |
| 1.3.6.1.4.1.164.3.6.2.4 | TablemdlDisconnectSupervisionTable | not-accessible | current | Disconnect Supervision table. |
| 1.3.6.1.4.1.164.3.6.2.4.1 | RowmdlDisconnectSupervisionEntry | not-accessible | current | An entry in the table. |
| 1.3.6.1.4.1.164.3.6.2.4.1.1 | ColumnmdlDsConfigIdx | read-only | current | This object indicates the Configuration number (1..255) referred. Value of 255 specifies the TmpCnfg (Scratch). Write operation for the table entries is allowe… |
| 1.3.6.1.4.1.164.3.6.2.4.1.2 | ColumnmdlDsSlotIdx | read-only | current | This object indicates a unique number of the slot position in which the module is inserted. |
| 1.3.6.1.4.1.164.3.6.2.4.1.3 | ColumnmdlDs | read-write | current | This object defines which terms will cause disconnection of call. disable = the Disconnect Supervision feature is disabled. In this case, all other objects of … |
| 1.3.6.1.4.1.164.3.6.2.4.1.4 | ColumnmdlDsUserLoc | read-write | current | User located in local or remote station. Local station will disconnect the call actually if needed. Applicable only if Disconnect Supervision (mdlDs) is differ… |
| 1.3.6.1.4.1.164.3.6.2.4.1.5 | ColumnmdlDsMode | read-write | current | This object defines the action, which will be done after remote disconnect occurred. This object is relevant only when mdlDsUserLoc = local(3). Applicable only… |
| 1.3.6.1.4.1.164.3.6.2.4.1.6 | ColumnmdlDsSilence | read-write | current | This object defines the silence period needed for an indication (seconds). Applicable only if Disconnect Supervision (mdlDs) is different from disable AND incl… |
| 1.3.6.1.4.1.164.3.6.2.4.1.7 | ColumnmdlDsClrFwSig | read-write | current | This object defines the Clear FWD Signal (A,B,C,D bits) for KVF.6 cards. This object is an indication of Near PBX to the Far PBX, that it wants to disconnect t… |
| 1.3.6.1.4.1.164.3.6.2.4.1.8 | ColumnmdlDsAnswerSig | read-write | current | This object defines the Clear FWD Signal (A,B,C,D bits) for KVF.6 cards. This object is an indication of Near PBX to the Far PBX, taht a call is present now on… |
| 1.3.6.1.4.1.164.3.6.2.4.1.9 | ColumnmdlDsClrBwSig | read-write | current | This object defines the Clear FWD Signal (A,B,C,D bits) for KVF.6 cards. This object is an indication of Far PBX to the Near PBX, that the call was disconnecte… |
| 1.3.6.1.4.1.164.3.6.2.4.1.10 | ColumnmdlDsFbtLowFreq | read-write | current | First frequency in Fast Busy Tone (Fbt) combination (Hz). Valid values: 0..4000,4095. 4095 = notApplicable. Available only if Disconnect Supervision (mdlDs) is… |
| 1.3.6.1.4.1.164.3.6.2.4.1.11 | ColumnmdlDsFbtHighFreq | read-write | current | Second frequency in Fast Busy Tone (Fbt) combination (Hz). Valid values: 0..4000,4095. 4095 = notApplicable. Available only if Disconnect Supervision (mdlDs) i… |
| 1.3.6.1.4.1.164.3.6.2.4.1.12 | ColumnmdlDsFbtTimeOn1 | read-write | current | This object defines the Time On 1 cadence (in msec). Valid values: 0,10,20..(every 10 msec)..10000,10230. 0 = disable, 10230 = notApplicable. Available only if… |
| 1.3.6.1.4.1.164.3.6.2.4.1.13 | ColumnmdlDsFbtTimeOff1 | read-write | current | This object defines the Time Off 1 cadence (in msec). Valid values: 0,10,20..(every 10 msec)..10000,10230. 0 = disable, 10230 = notApplicable. Available only i… |
| 1.3.6.1.4.1.164.3.6.2.4.1.14 | ColumnmdlDsFbtTimeOn2 | read-write | current | This object defines the Time On 2 cadence (in msec). Valid values: 0,10,20..(every 10 msec)..10000,10230. 0 = disable, 10230 = notApplicable. Available only if… |
| 1.3.6.1.4.1.164.3.6.2.4.1.15 | ColumnmdlDsFbtTimeOff2 | read-write | current | This object defines the Time Off 2 cadence (in msec). Valid values: 0,10,20..(every 10 msec)..10000,10230. 0 = disable, 10230 = notApplicable. Available only i… |
| 1.3.6.1.4.1.164.3.6.2.4.1.16 | ColumnmdlDsFbtLowFreqLevel | read-write | current | First frequency level for Fast Busy Tone (Fbt) in dBm units. Valid values: -32..31. Available only if Disconnect Supervision (mdlDs) is different from disable … |
| 1.3.6.1.4.1.164.3.6.2.4.1.17 | ColumnmdlDsFbtHighFreqLevel | read-write | current | Second frequency level for Fast Busy Tone (Fbt) in dBm units. Valid values: -32..31. Available only if Disconnect Supervision (mdlDs) is different from disable… |
| 1.3.6.1.4.1.164.3.6.3 | NodeprtKmux | |||
| 1.3.6.1.4.1.164.3.6.3.1 | NodeprtMainLink | |||
| 1.3.6.1.4.1.164.3.6.3.1.1 | TableprtMlFrameStatsTable | not-accessible | current | Frame diagnostics for the main links. |
| 1.3.6.1.4.1.164.3.6.3.1.1.1 | RowprtMlFrameStatsEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.6.3.1.1.1.1 | ColumnprtMlFrameIdx | read-only | current | The prtGenPrtIdx index of this link. Slot*100+1. |
| 1.3.6.1.4.1.164.3.6.3.1.1.1.2 | ColumnprtMlFrameSlt | read-only | current | This attribute indicates a unique number to identify the slot where the ML card is inserted. |
| 1.3.6.1.4.1.164.3.6.3.1.1.1.3 | ColumnprtMlBitWeight | read-only | current | This attribute indicates the Bit Weight [bps/bit] used for the selected prtMlFrameSlt. The Bit Weight is according to the ML Speed. |
| 1.3.6.1.4.1.164.3.6.3.1.1.1.4 | ColumnprtMlDataUsage | read-only | current | Data usage in [bits]. In order to convert it to 'bps' units, the 'bits' should be multiplied by prtMlBitWeight value. |
| 1.3.6.1.4.1.164.3.6.3.1.1.1.5 | ColumnprtMlControlSig | read-only | current | Control Signals usage of the ML in [bits]. In order to convert it to 'bps' units, the 'bits' should be multiplied by prtMlBitWeight value. |
| 1.3.6.1.4.1.164.3.6.3.1.1.1.6 | ColumnprtMlDownload | read-only | current | Download bandwidth usage of the ML in [bits]. In order to convert it to 'bps' units, the 'bits' should be multiplied by prtMlBitWeight value. |
| 1.3.6.1.4.1.164.3.6.3.1.1.1.7 | ColumnprtMlSync | read-only | current | Sync bandwidth usage of the ML in [bits]. In order to convert it to 'bps' units, the 'bits' should be multiplied by prtMlBitWeight value. |
| 1.3.6.1.4.1.164.3.6.3.1.1.1.8 | ColumnprtMlTotalUsage | read-only | current | Total bandwidth usage of the ML in [bits]. In order to convert it to 'bps' units, the 'bits' should be multiplied by prtMlBitWeight value. |
| 1.3.6.1.4.1.164.3.6.3.1.1.1.9 | ColumnprtMlTotalFree | read-only | current | Free bandwidth of the ML in [bits]. In order to convert it to 'bps' units, the 'bits' should be multiplied by prtMlBitWeight value. |
| 1.3.6.1.4.1.164.3.6.3.1.2 | TableprtMlTable | not-accessible | current | Parameters for the main links. KML.1 - KML.6, KML.7(T1), KML.8(E1), KML.10(ISDN) and KML.F(KML.11 Fiber-optic). |
| 1.3.6.1.4.1.164.3.6.3.1.2.1 | RowprtMlEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.6.3.1.2.1.1 | ColumnprtMlCnfgIdx | read-only | current | This attribute indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. Write operation for the table entries is a… |
| 1.3.6.1.4.1.164.3.6.3.1.2.1.2 | ColumnprtMlIdx | read-only | current | The prtGenPrtIdx index of this link. Slot*100+1 . |
| 1.3.6.1.4.1.164.3.6.3.1.2.1.3 | ColumnprtMlSlt | read-only | current | This attribute indicates a unique number to identify the slot where the ML card is inserted in. |
| 1.3.6.1.4.1.164.3.6.3.1.2.1.4 | ColumnprtMlTiming | read-write | current | The clock source for this link. For KML.1-KML.4, valid values: dte, eDce, or dce. For KML.5-KML.8, valid values: int or lbt. notApplicable - for KML.10 and KML… |
| 1.3.6.1.4.1.164.3.6.3.1.2.1.5 | ColumnprtMlBufferSize | read-write | current | The buffer size in bits for absorbing timing jitters. |
| 1.3.6.1.4.1.164.3.6.3.1.2.1.6 | ColumnprtMlDsrCts | read-write | current | Determines the DSR and CTS signal handling. notApplicable - for KML.4-KML.6. |
| 1.3.6.1.4.1.164.3.6.3.1.2.1.7 | ColumnprtMlSpeed | read-write | current | Determines the Main Link port speed. KML.1, KML.3, KML.4 support (Kbps): 9.6, 14.4, 19.2, 28.8, 32, 48, 56, 64, 128, 192, 256, 384, 512, 768, 1024, 1536. KML.2… |
| 1.3.6.1.4.1.164.3.6.3.1.2.1.8 | ColumnprtMlStartTS | read-write | current | 0=notApplicable - for all cards except KML.7, KML.8 For KML.7 - valid values: 1..24 For KML.8 - valid values: 1..31. |
| 1.3.6.1.4.1.164.3.6.3.1.2.1.9 | ColumnprtMlBypassTs16 | read-write | current | notApplicable - for all cards except KML.8. |
| 1.3.6.1.4.1.164.3.6.3.1.2.1.10 | ColumnprtMlCallMode | read-write | current | This object will be used when using an external modem linked to the KML.1-KML.4 or KML.10 cards. Initiate - KML card can initiate calls to the modem Listen - K… |
| 1.3.6.1.4.1.164.3.6.3.1.2.1.11 | ColumnprtMlBondingEnable | read-write | current | Disable/Enable applying the Bonding process, for KML.10 cards. notApplicable - for all cards except KML.10. |
| 1.3.6.1.4.1.164.3.6.3.1.3 | TableprtMlIsdnTable | not-accessible | current | Parameters for ISDN main links: KML.10. |
| 1.3.6.1.4.1.164.3.6.3.1.3.1 | RowprtMlIsdnEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.6.3.1.3.1.1 | ColumnprtMlIsdnCnfgIdx | read-only | current | This attribute indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. Write operation for the table entries is a… |
| 1.3.6.1.4.1.164.3.6.3.1.3.1.2 | ColumnprtMlIsdnIdx | read-only | current | The prtGenPrtIdx index of this link. Slot*100+1 . |
| 1.3.6.1.4.1.164.3.6.3.1.3.1.3 | ColumnprtMlIsdnSlt | read-only | current | This attribute indicates a unique number to identify the slot where the ML card is inserted in. |
| 1.3.6.1.4.1.164.3.6.3.1.3.1.4 | ColumnprtMlIsdnMode | read-write | current | ISDN Mode. switched - when ML Mode is Switched Backup. leased - in all other cases. |
| 1.3.6.1.4.1.164.3.6.3.1.3.1.5 | ColumnprtMlIsdnStandard | read-write | current | The ISDN standard. |
| 1.3.6.1.4.1.164.3.6.3.1.3.1.6 | ColumnprtMlIsdnLocSubNum | read-write | current | Local sub-number. 4 chars (digits 0..9). |
| 1.3.6.1.4.1.164.3.6.3.1.3.1.7 | ColumnprtMlIsdnLocNum | read-write | current | Local number. 20 chars (digits: 0..9). |
| 1.3.6.1.4.1.164.3.6.3.1.3.1.8 | ColumnprtMlIsdnOutSubNum | read-write | current | Out sub-number. 4 chars (digits 0..9). |
| 1.3.6.1.4.1.164.3.6.3.1.3.1.9 | ColumnprtMlIsdnBackupCallNum | read-write | current | Backup call number. 20 chars (digits: 0..9). |
| 1.3.6.1.4.1.164.3.6.3.1.3.1.10 | ColumnprtMlIsdnInNumMode | read-write | current | In number mode. |
| 1.3.6.1.4.1.164.3.6.3.2 | NodeprtHsLs | |||
| 1.3.6.1.4.1.164.3.6.3.2.1 | TableprtHsLsTable | not-accessible | current | Parameters for the High and Low speed channels. Cards: KLS.1,KLS.2, KHS.1, KHS.2, KDI/CH, KHSU.1, KHSU.2, KHS.703. |
| 1.3.6.1.4.1.164.3.6.3.2.1.1 | RowprtHsLsEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.6.3.2.1.1.1 | ColumnprtHsLsCnfgIdx | read-only | current | This attribute indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. Write operation for the table entries is a… |
| 1.3.6.1.4.1.164.3.6.3.2.1.1.2 | ColumnprtHsLsIdx | read-only | current | The prtGenPrtIdx index of this channel. In KHSU.1 and KHSU.2 there are three ISDN sub-channels on each port (2B+D).The sub-channels are numbered: Slot*100+11 ;… |
| 1.3.6.1.4.1.164.3.6.3.2.1.1.3 | ColumnprtHsLsSlt | read-only | current | This attribute indicates a unique number to identify the slot where the card is inserted in. In the 2104 Unit the entries kmxIO5(111)..kmxIO12(118) are not val… |
| 1.3.6.1.4.1.164.3.6.3.2.1.1.4 | ColumnprtHsLsCommProtocol | read-write | current | The communication protocol. |
| 1.3.6.1.4.1.164.3.6.3.2.1.1.5 | ColumnprtHsLsAsyncDataLen | read-write | current | Async Data Length in Bits. notApplicable - when prtHsLsCommProtocol=sync or notApplicable. |
| 1.3.6.1.4.1.164.3.6.3.2.1.1.6 | ColumnprtHsLsTiming | read-write | current | The variable is RW only if the communications protocol is sync. When the comm protocol is async, the variable is RO and its value is DCE. |
| 1.3.6.1.4.1.164.3.6.3.2.1.1.7 | ColumnprtHsLsCtrlSignal | read-write | current | Control signals. |
| 1.3.6.1.4.1.164.3.6.3.2.1.1.8 | ColumnprtHsLsCts | read-write | current | CTS Signal. |
| 1.3.6.1.4.1.164.3.6.3.2.1.1.9 | ColumnprtHsLsRtsCtsDelay | read-write | current | RTS-CTS delay in ms. notApplicable - when prtHsLsCts=on. |
| 1.3.6.1.4.1.164.3.6.3.2.1.1.10 | ColumnprtHsLsDsrMode | read-write | current | DSR Mode. |
| 1.3.6.1.4.1.164.3.6.3.2.1.1.11 | ColumnprtHsLsSpeed | read-write | current | KLS.1 supports (Kbps): 0.3, 0.6, 1.2, 2.4, 4.8, 9.6, 19.2, 38.4. KLS.1/New, KDI/CH support (Kbps): Group 1: 0.3, 0.6, 1.2, 2.4, 4.8, 9.6, 19.2, 38.4 Group 2: 7… |
| 1.3.6.1.4.1.164.3.6.3.2.1.1.12 | ColumnprtHsLsUType | read-write | current | U Interface Type. Applicable for KHSU.1/2 cards. The value will be the same for B1 and B2 pair; B3 and B4. |
| 1.3.6.1.4.1.164.3.6.3.3 | NodeprtTreMbe | |||
| 1.3.6.1.4.1.164.3.6.3.3.2 | TableprtTreMbeTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. Parameters for the channels of the TRE and MBE cards: KTRE, KMBE, KMBE/NEW. |
| 1.3.6.1.4.1.164.3.6.3.3.2.1 | RowprtTreMbeEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.6.3.3.2.1.1 | ColumnprtTreMbeCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.6.3.3.2.1.2 | ColumnprtTreMbeIdx | read-only | current | A unique port identifier within the card. Slot*100+11 . |
| 1.3.6.1.4.1.164.3.6.3.3.2.1.3 | ColumnprtTreMbeSlt | read-only | current | This attribute indicates a unique number to identify the slot where the card is inserted in. In the 2104 Unit the entries kmxIO5(111)..kmxIO12(118) are not val… |
| 1.3.6.1.4.1.164.3.6.3.3.2.1.4 | ColumnprtTreMbeLan | read-write | current | This attribute indicates whether the TRE/MBE port is operated as main or remote bridge. Default=remote. |
| 1.3.6.1.4.1.164.3.6.3.3.2.1.5 | ColumnprtTreMbeLanRate | read-write | current | This attribute indicates the Rate of the TRE port in Mbit/sec. Default-r4M. |
| 1.3.6.1.4.1.164.3.6.3.3.2.1.6 | ColumnprtTreMbeLinkSpeed | read-write | current | The Link Speed. |
| 1.3.6.1.4.1.164.3.6.3.4 | NodeprtVoiceFax | |||
| 1.3.6.1.4.1.164.3.6.3.4.1 | TableprtVoiceFaxTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. Parameters for the channels of the Voice and Fax channels. Cards: KVC.1/E&M, KVC… |
| 1.3.6.1.4.1.164.3.6.3.4.1.1 | RowprtVoiceFaxEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.6.3.4.1.1.1 | ColumnprtVoiceFaxCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.6.3.4.1.1.2 | ColumnprtVoiceFaxIdx | read-only | current | A unique identifier of the port, within the card. Slot*100+Ch external ports: Ch=1..10 internal ports (sub-channels): Ch=11..20. |
| 1.3.6.1.4.1.164.3.6.3.4.1.1.3 | ColumnprtVoiceFaxSlt | read-only | current | This attribute indicates a unique number to identify the slot where the card is inserted in. In the 2104 Unit the entries kmxIO5(111)..kmxIO12(118) are not val… |
| 1.3.6.1.4.1.164.3.6.3.4.1.1.4 | ColumnprtVoiceFaxTransGain | read-write | current | Transmit gain in dBm. A value of 255 is for notApplicable. The value will be: real value+50dBm (in order to avoid negative values). |
| 1.3.6.1.4.1.164.3.6.3.4.1.1.5 | ColumnprtVoiceFaxReceiveGain | read-write | current | Receive gain in dBm. A value of 255 is for notApplicable. The value will be: real value+50dBm (in order to avoid negative values). |
| 1.3.6.1.4.1.164.3.6.3.4.1.1.6 | ColumnprtVoiceFaxWire | read-write | current | Applicable only for E&M cards. |
| 1.3.6.1.4.1.164.3.6.3.4.1.1.7 | ColumnprtVoiceFaxTimeOut | read-write | current | Fax timeout in seconds. |
| 1.3.6.1.4.1.164.3.6.3.4.1.1.8 | ColumnprtVoiceFaxEchoCanceler | read-write | current | Echo canceler activation. |
| 1.3.6.1.4.1.164.3.6.3.4.1.1.9 | ColumnprtVoiceFaxSpeed | read-write | current | The channel speed. For KVF.6 and KVF.8 cards, each value will represent [4 x value], since each channel (Internal or External) is comprised of 4 sub-channels h… |
| 1.3.6.1.4.1.164.3.6.3.4.1.1.10 | ColumnprtVoiceFaxMeterRate | read-write | current | This entry is valid to KVF.4/FXO3 and KVF.4/FXS3. Meter Rate means rate of Call Meter in Public Phones, in KHz units. Must be equal for both channels. |
| 1.3.6.1.4.1.164.3.6.3.4.1.1.11 | ColumnprtVoiceFaxCodingLaw | read-write | current | Coding Law. This entry is valid for KVF.4/NS0 external channel and KVF.6 internal channels. |
| 1.3.6.1.4.1.164.3.6.3.4.1.1.12 | ColumnprtVoiceFaxOperMode | read-write | current | Operation Mode. This parameter is valid for KVF.6 and KVF.8 family. |
| 1.3.6.1.4.1.164.3.6.3.4.1.1.13 | ColumnprtVoiceFaxSigInOutband | read-write | current | This object is applicable for KVF.4/FXO3, KVF.4/FXS3, KVF.8 family cards. For KVF.4/FXO3, KVF.4/FXS3: Octet 1 for Receive parameters. Octet 2 for Transmit para… |
| 1.3.6.1.4.1.164.3.6.3.4.1.1.14 | ColumnprtVoiceFaxTsGroup | read-write | current | Ts Assignment group. Each KVF.6 internal channel should have a different value. 's21s22s23s24' = TSs: 21, 22, 23, 24 For KVF.6/E1/16, KVF.6/E1/31 values: 2..9 … |
| 1.3.6.1.4.1.164.3.6.3.4.1.1.15 | ColumnprtVoiceFaxRxFaxGain | read-write | current | FAX Receive gain in dBm. The value will be: (real value*10)+500dBm (in order to avoid negative and fractional values). |
| 1.3.6.1.4.1.164.3.6.3.4.1.1.16 | ColumnprtVoiceFaxSigHold | read-write | current | Signal Hold in [sec]. Applicable for all KVF.4 cards except S0/NS0. When a ML fails, instead of interrupting immediately a conversation and connecting it again… |
| 1.3.6.1.4.1.164.3.6.3.4.1.1.17 | ColumnprtVoiceFaxIfSignaling | read-write | current | Applicable only for KVF.8/FXO, KVF.8/FXS cards. Interface Analog Signaling. |
| 1.3.6.1.4.1.164.3.6.3.4.1.1.18 | ColumnprtVoiceFaxEMTypes | read-write | current | Applicable only for KVF.8/E&M card. |
| 1.3.6.1.4.1.164.3.6.3.4.1.1.19 | ColumnprtVoiceFaxRingFrequency | read-write | current | Applicable only for KVF.8/E&M card. The Ringing Frequency units will be in Hz. |
| 1.3.6.1.4.1.164.3.6.3.4.1.1.20 | ColumnprtVoiceFaxSignalingStatus | read-write | current | For KM-2100 this parameter should be Read Only. This object is applicable for KVF.6 and KVF.5 family cards. It shows the status (0 or 1) of each Signaling Bit … |
| 1.3.6.1.4.1.164.3.7 | Nodeimx | |||
| 1.3.6.1.4.1.164.3.7.1 | NodesystemImx | |||
| 1.3.6.1.4.1.164.3.7.1.1 | NodegeneralImx | |||
| 1.3.6.1.4.1.164.3.7.1.1.1 | ScalarsysGenClearAlarm | read-write | current | Clear the alarm buffer. The agent resets the variable automatically to off. |
| 1.3.6.1.4.1.164.3.7.1.1.2 | TablesysGenAlarmBuffTable | not-accessible | current | The alarm buffer of the imx. |
| 1.3.6.1.4.1.164.3.7.1.1.2.1 | RowsysGenAlarmBuffEntry | not-accessible | current | An entry in table sysGenAlarmBuffTable. |
| 1.3.6.1.4.1.164.3.7.1.1.2.1.1 | ColumnsysGenAlarmBuffIndex | read-only | current | The index of the alarm buffer Table. |
| 1.3.6.1.4.1.164.3.7.1.1.2.1.2 | ColumnsysGenAlarmDescr | read-only | current | The description of the alarm. Up to 80 chars. |
| 1.3.6.1.4.1.164.3.7.1.1.3 | ScalarsysGenClearLog | read-write | current | Clear the log buffer. The agent resets the variable automatically to off. |
| 1.3.6.1.4.1.164.3.7.1.1.4 | TablesysGenLogTable | not-accessible | current | The call log buffer of the imx. |
| 1.3.6.1.4.1.164.3.7.1.1.4.1 | RowsysGenLogEntry | not-accessible | current | An entry in table sysGenLogTable. |
| 1.3.6.1.4.1.164.3.7.1.1.4.1.1 | ColumnsysGenLogIndex | read-only | current | The index of the log Table. |
| 1.3.6.1.4.1.164.3.7.1.1.4.1.2 | ColumnsysGenLogDescr | read-only | current | The description of the entry in the log buffer. Up to 80 chars. |
| 1.3.6.1.4.1.164.3.7.1.2 | NodeprofilesImx | |||
| 1.3.6.1.4.1.164.3.7.1.2.1 | NodecallProfileImx | |||
| 1.3.6.1.4.1.164.3.7.1.2.1.1 | TablesysCallProfileTable | not-accessible | current | A table containing call profile parameters. There are 40 call profiles. |
| 1.3.6.1.4.1.164.3.7.1.2.1.1.1 | RowsysCallProfileEntry | not-accessible | current | An entry in table sysCallProfileTable. |
| 1.3.6.1.4.1.164.3.7.1.2.1.1.1.1 | ColumnsysCallProfileIndex | read-only | current | A running index for the table. |
| 1.3.6.1.4.1.164.3.7.1.2.1.1.1.2 | ColumnsysCallProfileConnectCmd | read-write | current | On(2) - Connect the call profile. The agent will automatically reset the variable to off(1) . |
| 1.3.6.1.4.1.164.3.7.1.2.1.1.1.3 | ColumnsysCallProfileDisconnectCmd | read-write | current | On(2) - Disconnect the call profile. The agent will automatically reset the variable to off(1). |
| 1.3.6.1.4.1.164.3.7.1.2.1.1.1.4 | ColumnsysCallProfileIncrBwCmd | read-write | current | Increment bandwidth of a call. The number of channels to increment 1..6. The agent will automatically reset the variable to 0. |
| 1.3.6.1.4.1.164.3.7.1.2.1.1.1.5 | ColumnsysCallProfileDecrBwCmd | read-write | current | Decrement bandwidth of a call. The number of channels to decrement 1..6. The agent will automatically reset the variable to 0. |
| 1.3.6.1.4.1.164.3.7.2 | NodeportImx | |||
| 1.3.6.1.4.1.164.3.7.2.1 | NodeuserPortImx | |||
| 1.3.6.1.4.1.164.3.7.2.1.1 | TableprtCnfgTable | not-accessible | current | A table containing configuration parameters for the user ports. |
| 1.3.6.1.4.1.164.3.7.2.1.1.1 | RowprtCnfgEntry | not-accessible | current | An entry in table prtCnfgTable. |
| 1.3.6.1.4.1.164.3.7.2.1.1.1.1 | ColumnprtIndex | read-only | current | The user port index. |
| 1.3.6.1.4.1.164.3.7.2.1.1.1.2 | ColumnprtCnfgDecrBwChNum | read-write | current | Decrement the port bandwidth by the specified number of channels. The agent resets the variable to 0. |
| 1.3.6.1.4.1.164.3.7.2.1.1.1.3 | ColumnprtCnfgIncrBwChNum | read-write | current | Increment the port bandwidth by the specified number of channels. The agent resets the variable to 0. |
| 1.3.6.1.4.1.164.3.7.2.1.1.1.4 | ColumnprtCnfgDisconnect | read-write | current | Disconnect the port (on(1)). The agent resets the variable to off(2). |
| 1.3.6.1.4.1.164.3.7.2.1.1.1.5 | ColumnprtCnfgActivateLoop | read-write | current | Activate the desired loop on the port. The agent will reset the variable to none(1). |
| 1.3.6.1.4.1.164.3.7.2.1.1.1.6 | ColumnprtCnfgClearLoop | read-write | current | Clear the desired loop from the port. The agent will reset the variable to none(1) |
| 1.3.6.1.4.1.164.3.7.2.1.1.1.7 | ColumnprtCnfgLoopStatus | read-only | current | The loop status at this port. The variable is a sum of 2**n where n is as follows: 0 - Local Loop is on. 1 - Remote Loop is on. 2 - BONDING Loop is on. If the … |
| 1.3.6.1.4.1.164.3.7.2.2 | NodesupervisoryPortImx | |||
| 1.3.6.1.4.1.164.3.7.2.2.1 | ScalarprtSpUsageImx | read-write | current | The supervisory port terminal usage definition. |
| 1.3.6.1.4.1.164.3.7.4 | NodechannelImx | |||
| 1.3.6.1.4.1.164.3.7.4.1 | TablechannelCnfgTable | not-accessible | current | A table containing configuration parameters for the channels. |
| 1.3.6.1.4.1.164.3.7.4.1.1 | RowchannelCnfgEntry | not-accessible | current | An entry in table channelCnfgTable. |
| 1.3.6.1.4.1.164.3.7.4.1.1.1 | ColumnchIndex | read-only | current | The channel index. |
| 1.3.6.1.4.1.164.3.7.4.1.1.2 | ColumnchCnfgUnlock | read-write | current | Unlock the channel (on). The agent resets the variable to off. |
| 1.3.6.1.4.1.164.3.7.4.1.1.3 | ColumnchCnfgPing | read-write | current | Ping the channel (on). The agent resets the variable to off. |
| 1.3.6.1.4.1.164.3.7.4.2 | TablechannelStatTable | not-accessible | current | A table containing status and statistics information for the channels. |
| 1.3.6.1.4.1.164.3.7.4.2.1 | RowchannelStatEntry | not-accessible | current | An entry in table channelStatTable. |
| 1.3.6.1.4.1.164.3.7.4.2.1.1 | ColumnchStatOperStatus | read-only | current | The operational state of the channel based on a ping operation. |
| 1.3.6.1.4.1.164.4 | NoderadBridges | |||
| 1.3.6.1.4.1.164.4.1 | NodegenBridge | |||
| 1.3.6.1.4.1.164.4.1.1 | ScalarradBridgeAction | read-write | current | This variable enables the operator to perform one of the specified actions on the tables maintained by the network device. Send actions are not currently imple… |
| 1.3.6.1.4.1.164.4.1.2 | ScalarradBridgeInactiveArpTimeOut | read-write | current | This variable defines the maximum time period that can pass between ARP requests concerning an entry in the ARP table. After this time period, the entry is del… |
| 1.3.6.1.4.1.164.4.1.3 | TableradBridgeMaskTable | not-accessible | current | Mask tables enable definition of forwarding restrictions and control of message flow in the internetwork. Each entry in this table defines a mask statement con… |
| 1.3.6.1.4.1.164.4.1.3.1 | RowradBridgeMaskEntry | not-accessible | current | An entry in table radBridgeMaskTable. |
| 1.3.6.1.4.1.164.4.1.3.1.1 | ColumnradBridgeMaskType | read-only | current | Defines the type of mask entry. |
| 1.3.6.1.4.1.164.4.1.3.1.2 | ColumnradBridgeMaskIfIndex | read-only | current | Specifies the if Index of the interface to which the mask is applied. |
| 1.3.6.1.4.1.164.4.1.3.1.3 | ColumnradBridgeMaskNum | read-only | current | The Mask entry number, defined by its line number in the mask table. |
| 1.3.6.1.4.1.164.4.1.3.1.4 | ColumnradBridgeMaskDest | read-write | current | Specifies the type of destination address carried by the frame to which the mask will be applied. Unassigned-condition deactivates the mask entry. |
| 1.3.6.1.4.1.164.4.1.3.1.5 | ColumnradBridgeMaskPat1 | read-write | current | Describes the mask field which is either a 16 bit binary pattern, or four digit hexadecimal pattern. |
| 1.3.6.1.4.1.164.4.1.3.1.6 | ColumnradBridgeMaskActiveBit1 | read-write | current | Specifies the positions of the wild card characters (*) in the radBridgeMaskPat1 field. |
| 1.3.6.1.4.1.164.4.1.3.1.7 | ColumnradBridgeMaskFrom1 | read-write | current | Offset base of radBridgeMaskPat1 within the frame. Net can be in some cases the data start point. |
| 1.3.6.1.4.1.164.4.1.3.1.8 | ColumnradBridgeMaskOffset1 | read-write | current | Specifies the radBridgeMaskPat1 offset within the frame (in bytes) from the base defined in by radBridgeMaskForm1.The mask offset is an even decimal number in … |
| 1.3.6.1.4.1.164.4.1.3.1.9 | ColumnradBridgeMaskCond1 | read-write | current | Specifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by radBridgeMaskOffset1 the packet contains data th… |
| 1.3.6.1.4.1.164.4.1.3.1.10 | ColumnradBridgeMaskPat2 | read-write | current | Describes the mask field which is either a 16 bit binary pattern, or four digit hexadecimal pattern. |
| 1.3.6.1.4.1.164.4.1.3.1.11 | ColumnradBridgeMaskActiveBit2 | read-write | current | Specifies the positions of the wild card characters (*) in the radBridgeMaskPat2 field. |
| 1.3.6.1.4.1.164.4.1.3.1.12 | ColumnradBridgeMaskFrom2 | read-write | current | Offset base of radBridgeMaskPat2 within the frame. Net can be in some cases the data start point. |
| 1.3.6.1.4.1.164.4.1.3.1.13 | ColumnradBridgeMaskOffset2 | read-write | current | Specifies the radBridgeMaskPat2 offset within the frame (in bytes) from the base defined in by radBridgeMaskForm2.The mask offset is an even decimal number in … |
| 1.3.6.1.4.1.164.4.1.3.1.14 | ColumnradBridgeMaskCond2 | read-write | current | Specifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by radBridgeMaskOffset2 the packet contains data th… |
| 1.3.6.1.4.1.164.4.1.3.1.15 | ColumnradBridgeMaskPat3 | read-write | current | Describes the mask field which is either a 16 bit binary pattern, or four digit hexadecimal pattern. |
| 1.3.6.1.4.1.164.4.1.3.1.16 | ColumnradBridgeMaskActiveBit3 | read-write | current | Specifies the positions of the wild card characters (*) in the radBridgeMaskPat3 field. |
| 1.3.6.1.4.1.164.4.1.3.1.17 | ColumnradBridgeMaskFrom3 | read-write | current | Offset base of radBridgeMaskPat3 within the frame. Net can be in some cases the data start point. |
| 1.3.6.1.4.1.164.4.1.3.1.18 | ColumnradBridgeMaskOffset3 | read-write | current | Specifies the radBridgeMaskPat3 offset within the frame (in bytes) from the base defined in by radBridgeMaskForm3. The mask offset is an even decimal number in… |
| 1.3.6.1.4.1.164.4.1.3.1.19 | ColumnradBridgeMaskCond3 | read-write | current | Specifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by radBridgeMaskOffset3 the packet contains data th… |
| 1.3.6.1.4.1.164.4.1.3.1.20 | ColumnradBridgeMaskOper | read-write | current | The type of action to be taken if the frame meets the conditions of the mask. noOp = disabled (mask remains on list, but is not active) delete = mask is remove… |
| 1.3.6.1.4.1.164.4.1.4 | NoderadBridgeCOD | |||
| 1.3.6.1.4.1.164.4.1.4.1 | TableradBridgeCODParamTable | not-accessible | current | The table of COD parameters |
| 1.3.6.1.4.1.164.4.1.4.1.1 | RowradBridgeCODEntry | not-accessible | current | Each radBridgeCODEntry consists of the following parameters |
| 1.3.6.1.4.1.164.4.1.4.1.1.1 | ColumnradBridgeCODIfIndex | read-only | current | The interface to which this COD entry is applicable. |
| 1.3.6.1.4.1.164.4.1.4.1.1.2 | ColumnradBridgeCODManualConnect | read-write | current | The management station can start connection manually by setting this parameter |
| 1.3.6.1.4.1.164.4.1.4.1.1.3 | ColumnradBridgeCODMode | read-write | current | In answer mode only one incoming call may be accepted at a time. Other nodes attempting to access the local modem will receive a busy signal until the connecti… |
| 1.3.6.1.4.1.164.4.1.4.1.1.4 | ColumnradBridgeCODConnectDelay | read-write | current | The connect delay defines the minimum time period that the link must stay disconnected, between 2 succesive connections (in seconds). |
| 1.3.6.1.4.1.164.4.1.4.1.1.5 | ColumnradBridgeCODisConnectDelay | read-write | current | The disconnect delay defines the minimum time period the link must stay connected, between 2 succesive disconnections (in seconds). |
| 1.3.6.1.4.1.164.4.1.4.1.1.6 | ColumnradBridgeCODImplicitSwitch | read-write | current | The inplicit switch allows the user to ignore implicit triggers provided by the COD software. |
| 1.3.6.1.4.1.164.4.1.4.1.1.7 | ColumnradBridgeCODNumAccess | read-only | current | The number of successful connections that have been established since the COD has been reset. |
| 1.3.6.1.4.1.164.4.1.4.1.1.8 | ColumnradBridgeCODTotalConnecTime | read-only | current | The sum of all the connect time intervals since the COD was reset. |
| 1.3.6.1.4.1.164.4.1.4.2 | TableradBridgeCODTimeTriggerTable | not-accessible | current | The table of COD parameters |
| 1.3.6.1.4.1.164.4.1.4.2.1 | RowradBridgeCODTimeTriggerEntry | not-accessible | current | Each radBridgeCODTimeTriggerEntry consists of the following parameters |
| 1.3.6.1.4.1.164.4.1.4.2.1.1 | ColumnradBridgeCODTimeIfIndex | read-only | current | The interface to which this COD Time Trigger entry is applicable. |
| 1.3.6.1.4.1.164.4.1.4.2.1.2 | ColumnradBridgeCODDay | read-only | current | The day of the week in which the dial up connection operates. |
| 1.3.6.1.4.1.164.4.1.4.2.1.3 | ColumnradBridgeCODTimeTriggerNum | read-only | current | Every day of the week the user can configure 3 dial up connections. |
| 1.3.6.1.4.1.164.4.1.4.2.1.4 | ColumnradBridgeCODTimeTriggerFrom | read-write | current | Time to start Dial Up connection, in format hh:mm. |
| 1.3.6.1.4.1.164.4.1.4.2.1.5 | ColumnradBridgeCODTimeTriggerTo | read-write | current | Time to terminate Dial Up connection, in format HH:MM. |
| 1.3.6.1.4.1.164.4.1.4.2.1.6 | ColumnradBridgeCODTimeTriggerStatus | read-write | current | The status of a table entry. |
| 1.3.6.1.4.1.164.4.1.4.3 | NoderadBridgeCODTraffic | |||
| 1.3.6.1.4.1.164.4.1.4.3.1 | TableradBridgeCODTrafficTable | not-accessible | current | The table of COD Traffic trigger |
| 1.3.6.1.4.1.164.4.1.4.3.1.1 | RowradBridgeCODTrafficEntry | not-accessible | current | Each radBridgeCODTrafficEntry consists of the following parameters. |
| 1.3.6.1.4.1.164.4.1.4.3.1.1.1 | ColumnradBridgeCODProtocolType | read-only | current | The Protocol Type of the Traffic Table |
| 1.3.6.1.4.1.164.4.1.4.3.1.1.2 | ColumnradBridgeCODTrafficTriggerStatus | read-write | current | Command of Status of the Protocol Traffic Trigger |
| 1.3.6.1.4.1.164.4.1.4.3.2 | ScalarradBridgeCODRemoteIPAddr | read-write | current | This is the Remote IP Address |
| 1.3.6.1.4.1.164.4.1.4.3.3 | ScalarradBridgeCODIPMask | read-write | current | This is the Mask of the Remote IP Address |
| 1.3.6.1.4.1.164.4.1.4.3.4 | ScalarradBridgeCODTrafficTriggerProtType | read-write | current | Protocol Type for the User Defined Protocol Traffic Trigger (3). |
| 1.3.6.1.4.1.164.4.1.4.4 | TableradBridgeCODCondTable | not-accessible | current | The table of COD Condition parameters |
| 1.3.6.1.4.1.164.4.1.4.4.1 | RowradBridgeCODCondEntry | not-accessible | current | Each radBridgeCODCondEntry consists of the following parameters |
| 1.3.6.1.4.1.164.4.1.4.4.1.1 | ColumnradBridgeCODCondIfIndex | read-only | current | The interface, this COD entry is applicable to. |
| 1.3.6.1.4.1.164.4.1.4.4.1.2 | ColumnradBridgeCODOriginateConnectCondition | read-write | current | This condition, allows the user to specify the condition under which the link is connected. The options are onPowerOn - On power on. whenAnyStationOnLan - When… |
| 1.3.6.1.4.1.164.4.1.4.4.1.3 | ColumnradBridgeCODOriginateDisConnectCondition | read-write | current | This condition allows the user to specify the condition under which the link is disconnected. The options are: noStationOnLan - When there is no station on lan… |
| 1.3.6.1.4.1.164.4.1.4.4.1.4 | ColumnradBridgeCODOriginateDisConnectDelay | read-write | current | Delay time in seconds. |
| 1.3.6.1.4.1.164.4.1.4.4.1.5 | ColumnradBridgeCODAnswerConnectCondition | read-write | current | CODCondAnswerConnect allows the user to specify the condition under which the link is connected. The options are: onPowerOn - On power on. whenAnyStationOnLan … |
| 1.3.6.1.4.1.164.4.1.4.4.1.6 | ColumnradBridgeCODSpecificOnTrafficOIDCondition | read-only | current | A reference to a specific entry in the radBridgeMaskTable, which describes the particular COD condition . If Connect or Disconnect Conditions are not onTraffic… |
| 1.3.6.1.4.1.164.4.1.4.4.1.7 | ColumnradBridgeCODDisConnectMinimunFramesNumber | read-write | current | Frames rate. |
| 1.3.6.1.4.1.164.4.1.5 | NoderadBridgeIPX | |||
| 1.3.6.1.4.1.164.4.1.5.1 | NoderadBridgeIPXdriver | |||
| 1.3.6.1.4.1.164.4.1.5.1.1 | ScalarradBridgeIPXForwarding | read-write | current | The indication of whether this entity is acting as an IPX gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IPX… |
| 1.3.6.1.4.1.164.4.1.5.2 | NoderadBridgeIPXRip | |||
| 1.3.6.1.4.1.164.4.1.5.2.1 | ScalarradBridgeIPXRipOutPackets | read-only | current | The total number of packets transmitted by RIP. |
| 1.3.6.1.4.1.164.4.1.5.2.2 | ScalarradBridgeIPXRipInPackets | read-only | current | The total number of packets received by RIP. This will include any packets that are subsequently discarded. |
| 1.3.6.1.4.1.164.4.1.5.2.3 | ScalarradBridgeIPXRipInDiscards | read-only | current | The number of received packets discarded by RIP. |
| 1.3.6.1.4.1.164.4.1.5.2.4 | ScalarradBridgeIPXRipTblNoOfEntries | read-only | current | The max number of entries that exist in the RIP routing table. |
| 1.3.6.1.4.1.164.4.1.5.2.5 | ScalarradBridgeIPXRipTblBcastTrigUpdateInterval | read-write | current | The default time interval (in seconds)between triggered RIP updates on a broadcast type interface. A triggered update occurs when a change is detected in the r… |
| 1.3.6.1.4.1.164.4.1.5.2.6 | TableradBridgeIPXRipTable | not-accessible | current | The routing table used by RIP to calculate routes to remote desination networks. |
| 1.3.6.1.4.1.164.4.1.5.2.6.1 | RowradBridgeIPXRipTableEntry | not-accessible | current | The routing information for one of this entity's destination networks. |
| 1.3.6.1.4.1.164.4.1.5.2.6.1.1 | ColumnradBridgeIPXRipDestNetwork | read-only | current | The destination network address to which this entry's routing information pertains. |
| 1.3.6.1.4.1.164.4.1.5.2.6.1.2 | ColumnradBridgeIPXRipPolicy | read-only | current | A value specifying the precidence of the route. A value of zero means that the route is the best route, a value of one means that the route is the second best … |
| 1.3.6.1.4.1.164.4.1.5.2.6.1.3 | ColumnradBridgeIPXRipForwardingRouter | read-write | current | The IPX node address of the next hop (router) for the entry's associated destination network. |
| 1.3.6.1.4.1.164.4.1.5.2.6.1.4 | ColumnradBridgeIPXRipNIC | read-write | current | An interface identifier specifying what IPX interface the next hop can be found on. |
| 1.3.6.1.4.1.164.4.1.5.2.6.1.5 | ColumnradBridgeIPXRipTickMetric | read-write | current | The metric, in terms of transit time, associated with the route given by the entry. This time is in terms of 1/18ths of a second. |
| 1.3.6.1.4.1.164.4.1.5.2.6.1.6 | ColumnradBridgeIPXRipHopMetric | read-write | current | The metric, in terms of distance , associated with the route given by the entry. |
| 1.3.6.1.4.1.164.4.1.5.2.6.1.7 | ColumnradBridgeIPXRipAgingTime | read-only | current | The last time that the entry was updated. The time will be provided in terms of the MIB-I object sysUpTime. |
| 1.3.6.1.4.1.164.4.1.5.2.6.1.8 | ColumnradBridgeIPXRipValueStatus | read-write | current | The entry status value; whether the entry is permanent (added statically), reachable or unreachable. In the latter two cases it would be added by RIP. A semiDy… |
| 1.3.6.1.4.1.164.4.1.5.2.6.1.9 | ColumnradBridgeIPXRipForwardType | read-write | current | The type of route. Note that local(2) refers to a route for which the next hop is the final destination; remote(3) refers to a route for which the next hop is … |
| 1.3.6.1.4.1.164.4.1.5.2.7 | TableradBridgeIPXRipInfTable | not-accessible | current | The RIP interface table. |
| 1.3.6.1.4.1.164.4.1.5.2.7.1 | RowradBridgeIPXRipInfEntry | not-accessible | current | Each entry corresponds to one ifindex. |
| 1.3.6.1.4.1.164.4.1.5.2.7.1.1 | ColumnradBridgeIPXRipInfIfIndex | read-only | current | This value of Ifindex is same as radBridgeIPXIfIndex in the IPX Interface Table. |
| 1.3.6.1.4.1.164.4.1.5.2.7.1.2 | ColumnradBridgeIPXRipInfBcastUpdate | read-write | current | The RIP periodic update interval, in seconds. Zero value corresponds to infinite interval. |
| 1.3.6.1.4.1.164.4.1.5.2.7.1.3 | ColumnradBridgeIPXRipInfAgeMultiplier | read-write | current | The holding multiplier for information received in RIP periodic updates. Zero value corresponds to infinite aging time. |
| 1.3.6.1.4.1.164.4.1.5.3 | NoderadBridgeIPXSap | |||
| 1.3.6.1.4.1.164.4.1.5.3.1 | ScalarradBridgeIPXSapOutPackets | read-only | current | The total number of packets transmitted by SAP. |
| 1.3.6.1.4.1.164.4.1.5.3.2 | ScalarradBridgeIPXSapInPackets | read-only | current | The total number of packets received by SAP. This will include any packets that are subsequently discarded. |
| 1.3.6.1.4.1.164.4.1.5.3.3 | ScalarradBridgeIPXSapInDiscards | read-only | current | The number of received packets discarded by SAP. |
| 1.3.6.1.4.1.164.4.1.5.3.4 | ScalarradBridgeIPXSapTblNoOfEntries | read-only | current | The max number of entries that exist in the SAP Server Information table. |
| 1.3.6.1.4.1.164.4.1.5.3.5 | ScalarradBridgeIPXSapTblBcastTrigUpdateInterval | read-write | current | The default time interval (in seconds) between triggered SAP updates on a broadcast style interface. A triggered update occurs when a change is detected in the… |
| 1.3.6.1.4.1.164.4.1.5.3.6 | TableradBridgeIPXSapTable | not-accessible | current | The Server Information table is used by SAP to store information of services which are available on the internetwork. |
| 1.3.6.1.4.1.164.4.1.5.3.6.1 | RowradBridgeIPXSapTableEntry | not-accessible | current | The server information for one of this entity's server entries. |
| 1.3.6.1.4.1.164.4.1.5.3.6.1.1 | ColumnradBridgeIPXSapServerType | read-only | current | The type of the server for which this entry pertains. |
| 1.3.6.1.4.1.164.4.1.5.3.6.1.2 | ColumnradBridgeIPXSapName | read-only | current | The name of the server for which this entry pertains. |
| 1.3.6.1.4.1.164.4.1.5.3.6.1.3 | ColumnradBridgeIPXSapNetwork | read-write | current | The IPX network address of the host on which this server exists. |
| 1.3.6.1.4.1.164.4.1.5.3.6.1.4 | ColumnradBridgeIPXSapNode | read-write | current | The IPX node address of the host on which this server exists. |
| 1.3.6.1.4.1.164.4.1.5.3.6.1.5 | ColumnradBridgeIPXSapSocket | read-write | current | The IPX socket number that is being used by the server to which this entry pertains. |
| 1.3.6.1.4.1.164.4.1.5.3.6.1.6 | ColumnradBridgeIPXSapHopsToServer | read-write | current | The number of hops to the entity on which this server exists. |
| 1.3.6.1.4.1.164.4.1.5.3.6.1.7 | ColumnradBridgeIPXSapNIC | read-write | current | An Network Interface Card identifier specifying what IPX interface the next hop can be found on. |
| 1.3.6.1.4.1.164.4.1.5.3.6.1.8 | ColumnradBridgeIPXSapAgingTime | read-only | current | The last time that the entry was updated. The time will be provided in terms of the MIB-I object sysUpTime. |
| 1.3.6.1.4.1.164.4.1.5.3.6.1.9 | ColumnradBridgeIPXSapStatus | read-write | current | The status of the entry. |
| 1.3.6.1.4.1.164.4.1.5.3.7 | TableradBridgeIPXSapInfTable | not-accessible | current | The Sap interface table. |
| 1.3.6.1.4.1.164.4.1.5.3.7.1 | RowradBridgeIPXSapInfEntry | not-accessible | current | Each entry corresponds to one ifindex. |
| 1.3.6.1.4.1.164.4.1.5.3.7.1.1 | ColumnradBridgeIPXSapInfIfIndex | read-only | current | This value of Ifindex is same as radBridgeIPXIfIndex in the IPX Interface Table. |
| 1.3.6.1.4.1.164.4.1.5.3.7.1.2 | ColumnradBridgeIPXSapInfBcastUpdate | read-write | current | The SAP periodic update interval, in seconds. Zero value corresponds to infinite interval. |
| 1.3.6.1.4.1.164.4.1.5.3.7.1.3 | ColumnradBridgeIPXSapInfAgeMultiplier | read-write | current | The holding multiplier for information received in SAP periodic updates. Zero value corresponds to infinite aging time. |
| 1.3.6.1.4.1.164.4.1.6 | NodenewMasking | |||
| 1.3.6.1.4.1.164.4.1.6.1 | ScalarmaskingMaxEntries | read-only | current | The maximum number of entries in the masking table. |
| 1.3.6.1.4.1.164.4.1.6.2 | ScalarmaskingCurrentEntries | read-only | current | The number of entries in the mask table. |
| 1.3.6.1.4.1.164.4.1.6.3 | TablemaskingTable | not-accessible | current | This is the new masking scheme. Mask tables enable definition of forwarding restrictions and control of message flow in the internetwork. Each entry in this ta… |
| 1.3.6.1.4.1.164.4.1.6.3.1 | RowmaskingEntry | not-accessible | current | Defines the contents of each line in the mask table. |
| 1.3.6.1.4.1.164.4.1.6.3.1.1 | ColumnmaskingType | read-only | current | Defines the type of mask entry. |
| 1.3.6.1.4.1.164.4.1.6.3.1.2 | ColumnmaskingIfIndex | read-only | current | Specifies the ifIndex of the interface to which the mask is applied. |
| 1.3.6.1.4.1.164.4.1.6.3.1.3 | ColumnmaskingIndex | read-only | current | An index to the masking table. This number should not be greater than maskingMaxEntries |
| 1.3.6.1.4.1.164.4.1.6.3.1.4 | ColumnmaskingProtocolType | read-write | current | The base protocol for masking. IPX, IP, others. |
| 1.3.6.1.4.1.164.4.1.6.3.1.5 | ColumnmaskingSmartMaskOID | read-only | current | A reference to a specific Smart mask table (old radBridgeMaskTable) which enables a more specific mask type. If this information is not available, its value sh… |
| 1.3.6.1.4.1.164.4.1.6.3.1.6 | ColumnmaskingFrameType | read-write | current | Enables the user to decide about frame type * all frame * just broadcast * just multicast. |
| 1.3.6.1.4.1.164.4.1.6.3.1.7 | ColumnmaskingFrameTypeCondition | read-write | current | Specifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by maskingFrameType the packet contains data that m… |
| 1.3.6.1.4.1.164.4.1.6.3.1.8 | ColumnmaskingSourceAddress | read-write | current | The source address is according to the maskingMacOrNet and maskingProtocolType variables. In case of 'MAC' enter 6 bytes (48 bit) of source address. In case of… |
| 1.3.6.1.4.1.164.4.1.6.3.1.9 | ColumnmaskingSourceActiveBits | read-write | current | Specifies the positions of the wild card characters (*) in the maskingSourceAddress field. Only the 1's bit will be taken in considerations. |
| 1.3.6.1.4.1.164.4.1.6.3.1.10 | ColumnmaskingSourceMacOrNet | read-write | current | The variable maskingSourceAddress and maskingSourceActiveBits will be treated as MAC, or NET address. - If maskingProtocolType = 'all', 'sna', 'netbios', dec o… |
| 1.3.6.1.4.1.164.4.1.6.3.1.11 | ColumnmaskingSourceCondition | read-write | current | Specifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by maskingSourceAddress (in conjunction with maskin… |
| 1.3.6.1.4.1.164.4.1.6.3.1.12 | ColumnmaskingDestAddress | read-write | current | If maskingFrameType = broadcast or multicast, this object is NOT APPLICABLE. If maskingFrameType = all or unknown, this object is applicable. The destination a… |
| 1.3.6.1.4.1.164.4.1.6.3.1.13 | ColumnmaskingDestActiveBits | read-write | current | If maskingFrameType = broadcast or multicast, this object is NOT APPLICABLE. If maskingFrameType = all or unknown, this object is applicable. Specifies the pos… |
| 1.3.6.1.4.1.164.4.1.6.3.1.14 | ColumnmaskingDestMacOrNet | read-write | current | If maskingFrameType = broadcast or multicast, this object is NOT APPLICABLE. If maskingFrameType = all or unknown, this object is applicable. - If maskingProto… |
| 1.3.6.1.4.1.164.4.1.6.3.1.15 | ColumnmaskingDestCondition | read-write | current | If maskingFrameType = broadcast or multicast, this object is NOT APPLICABLE. If maskingFrameType = all or unknown, this object is applicable. Specifies the log… |
| 1.3.6.1.4.1.164.4.1.6.3.1.16 | ColumnmaskingLowLevelProt | read-write | current | This field is set in conjunction with the maskingProtocolType variable. This variable specifies the low level protocol. The IPX socket entered in maskingDestAd… |
| 1.3.6.1.4.1.164.4.1.6.3.1.17 | ColumnmaskingLowLevelProtCondition | read-write | current | Specifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by maskingLowLevelProt the packet contains data tha… |
| 1.3.6.1.4.1.164.4.1.6.3.1.18 | ColumnmaskingHighLevelProt | read-write | current | This field is set in connection to the maskingProtocolType variable. This variable specifies the high level protocols (application). As for today it supports j… |
| 1.3.6.1.4.1.164.4.1.6.3.1.19 | ColumnmaskingHighLevelProtCondition | read-write | current | Specifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by maskingHighLevelProt the packet contains data th… |
| 1.3.6.1.4.1.164.4.1.6.3.1.20 | ColumnmaskingPortNum | read-write | current | The port number is the same as in high level protocol. It specifies the dest. port in IP case or the dest. socket in case of IPX & apple protocols. IP - This o… |
| 1.3.6.1.4.1.164.4.1.6.3.1.21 | ColumnmaskingPortNumCondition | read-write | current | Specifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by maskingPortNum the packet contains data that mat… |
| 1.3.6.1.4.1.164.4.1.6.3.1.22 | ColumnmaskingOperation | read-write | current | The type of action to be taken if the frame meets the conditions of the mask. noOp = disabled (mask remains on list, but is not active) delete = mask is remove… |
| 1.3.6.1.4.1.164.4.1.6.3.1.23 | ColumnmaskingSrcPortNum | read-write | current | The source port number. For IP: No Condition. For IPX: This object is applicable only if the socket entered in maskingSourceAddress is don't care (00) and mask… |
| 1.3.6.1.4.1.164.4.1.6.3.1.24 | ColumnmaskingSrcPortNumCondition | read-write | current | The same as 'maskingPortNumCondition'. Relates to source port. |
| 1.3.6.1.4.1.164.4.1.7 | NoderadBridgePerformance | |||
| 1.3.6.1.4.1.164.4.1.7.1 | TableradBridgeCurrentTable | not-accessible | current | The RAD Bridge Current table. |
| 1.3.6.1.4.1.164.4.1.7.1.1 | RowradBridgeCurrentEntry | not-accessible | current | An entry in the RAD Bridge Current table. |
| 1.3.6.1.4.1.164.4.1.7.1.1.1 | ColumnradBridgeCurrentIndex | read-only | current | The index of the Bridge interface or Bridge Port. It may be ifIndex. |
| 1.3.6.1.4.1.164.4.1.7.1.1.2 | ColumnradBridgeCurrentIngressFilteringDiscardedFrames | read-only | current | The counter associated with the number of Discarded Frames upon Ingress Filtering, encountered by a Bridge interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.4.1.7.1.1.3 | ColumnradBridgeCurrentFrameTypeDiscardedFrames | read-only | current | The counter associated with the number of Discarded Frames upon Frame Type and Tagging Mismatch, encountered by a Bridge interface in the current 15 minute int… |
| 1.3.6.1.4.1.164.4.1.7.1.1.4 | ColumnradBridgeCurrentRxCorrectFrames | read-only | current | The counter associated with the number of Received Correct Frames, encountered by a Bridge Port in the current 15 minute interval. |
| 1.3.6.1.4.1.164.4.1.7.1.1.5 | ColumnradBridgeCurrentRxCorrectBytes | read-only | current | The counter associated with the number of Received Correct Bytes, encountered by a Bridge Port in the current 15 minute interval. |
| 1.3.6.1.4.1.164.4.1.7.1.1.6 | ColumnradBridgeCurrentRxCorrectBytesHCOverflow | read-only | current | The counter associated with the number of times the associated radBridgeCurrentRxCorrectBytes counter has overflowed. |
| 1.3.6.1.4.1.164.4.1.7.1.1.7 | ColumnradBridgeCurrentRxBcastFrames | read-only | current | The counter associated with the number of Received Broadcast Frames, encountered by a Bridge Port in the current 15 minute interval. |
| 1.3.6.1.4.1.164.4.1.7.1.1.8 | ColumnradBridgeCurrentRxMcastFrames | read-only | current | The counter associated with the number of Received Multicast Frames, encountered by a Bridge Port in the current 15 minute interval. |
| 1.3.6.1.4.1.164.4.1.7.1.1.9 | ColumnradBridgeCurrentTxCorrectFrames | read-only | current | The counter associated with the number of Transmitted Correct Frames, encountered by a Bridge Port in the current 15 minute interval. |
| 1.3.6.1.4.1.164.4.1.7.1.1.10 | ColumnradBridgeCurrentTxCorrectBytes | read-only | current | The counter associated with the number of Transmitted Correct Bytes, encountered by a Bridge Port in the current 15 minute interval. |
| 1.3.6.1.4.1.164.4.1.7.1.1.11 | ColumnradBridgeCurrentTxCorrectBytesHCOverflow | read-only | current | The counter associated with the number of times the associated radBridgeCurrentTxCorrectBytes counter has overflowed. |
| 1.3.6.1.4.1.164.4.1.7.1.1.12 | ColumnradBridgeCurrentTxBcastFrames | read-only | current | The counter associated with the number of Transmitted Broadcast Frames, encountered by a Bridge Port in the current 15 minute interval. |
| 1.3.6.1.4.1.164.4.1.7.1.1.13 | ColumnradBridgeCurrentTxMcastFrames | read-only | current | The counter associated with the number of Transmitted Multicast Frames, encountered by a Bridge Port in the current 15 minute interval. |
| 1.3.6.1.4.1.164.4.1.7.1.1.14 | ColumnradBridgeCurrentTxDropFrames | read-only | current | The counter associated with the number of Transmitted Dropped Frames, encountered by a Bridge Port in the current 15 minute interval. |
| 1.3.6.1.4.1.164.4.1.7.2 | TableradBridgeIntervalTable | not-accessible | current | The RAD Bridge Interval table. |
| 1.3.6.1.4.1.164.4.1.7.2.1 | RowradBridgeIntervalEntry | not-accessible | current | An entry in the RAD Bridge Interval table. |
| 1.3.6.1.4.1.164.4.1.7.2.1.1 | ColumnradBridgeIntervalIndex | read-only | current | The index of the bridge interface or Bridge Port. It may be ifIndex. |
| 1.3.6.1.4.1.164.4.1.7.2.1.2 | ColumnradBridgeIntervalNumber | read-only | current | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that … |
| 1.3.6.1.4.1.164.4.1.7.2.1.3 | ColumnradBridgeIntervalIngressFilteringDiscardedFrames | read-only | current | The counter associated with the number of Discarded Frames upon Ingress Filtering, encountered by a Bridge interface in one of the previous 96, individual 15 m… |
| 1.3.6.1.4.1.164.4.1.7.2.1.4 | ColumnradBridgeIntervalFrameTypeDiscardedFrames | read-only | current | The counter associated with the number of Discarded Frames upon Frame Type and Tagging Mismatch, encountered by a Bridge interface in one of the previous 96, i… |
| 1.3.6.1.4.1.164.4.1.7.2.1.5 | ColumnradBridgeIntervalRxCorrectFrames | read-only | current | The counter associated with the number of Received Correct Frames, encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.4.1.7.2.1.6 | ColumnradBridgeIntervalRxCorrectBytes | read-only | current | The counter associated with the number of Received Correct Bytes, encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.4.1.7.2.1.7 | ColumnradBridgeIntervalRxCorrectBytesHCOverflow | read-only | current | The counter associated with the number of times the associated radBridgeIntervalRxCorrectBytes counter has overflowed. |
| 1.3.6.1.4.1.164.4.1.7.2.1.8 | ColumnradBridgeIntervalRxBcastFrames | read-only | current | The counter associated with the number of Received Broadcast Frames, encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.4.1.7.2.1.9 | ColumnradBridgeIntervalRxMcastFrames | read-only | current | The counter associated with the number of Received Multicast Frames, encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.4.1.7.2.1.10 | ColumnradBridgeIntervalTxCorrectFrames | read-only | current | The counter associated with the number of Transmitted Correct Frames, encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.4.1.7.2.1.11 | ColumnradBridgeIntervalTxCorrectBytes | read-only | current | The counter associated with the number of Transmitted Correct Bytes, encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.4.1.7.2.1.12 | ColumnradBridgeIntervalTxCorrectBytesHCOverflow | read-only | current | The counter associated with the number of times the associated radBridgeIntervalTxCorrectBytes counter has overflowed. |
| 1.3.6.1.4.1.164.4.1.7.2.1.13 | ColumnradBridgeIntervalTxBcastFrames | read-only | current | The counter associated with the number of Transmitted Broadcast Frames, encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.4.1.7.2.1.14 | ColumnradBridgeIntervalTxMcastFrames | read-only | current | The counter associated with the number of Transmitted Multicast Frames, encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.4.1.7.2.1.15 | ColumnradBridgeIntervalTxDropFrames | read-only | current | The counter associated with the number of Transmitted Dropped Frames, encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.4.1.8 | NoderadBridgePortBaseVlan | |||
| 1.3.6.1.4.1.164.4.1.8.1 | TableradBridgePortBaseVlanTable | not-accessible | current | A table containing static configuration information for each VLAN configured into the device by management. All entries are permanent and will be restored afte… |
| 1.3.6.1.4.1.164.4.1.8.1.1 | RowradBridgePortBaseVlanEntry | not-accessible | current | Static information for a VLAN configured into the device by (local or network) management. |
| 1.3.6.1.4.1.164.4.1.8.1.1.1 | ColumnradBridgePortBaseVlanCnfgIdx | not-accessible | current | This object indicates the Idx of the Agent Cnfg the following objects refer. 255=Temporary Cnfg (when relevant, Set is done only to this configuration). For Ag… |
| 1.3.6.1.4.1.164.4.1.8.1.1.2 | ColumnradBridgePortBaseVlanIdx | not-accessible | current | Index of the port based VLAN. |
| 1.3.6.1.4.1.164.4.1.8.1.1.3 | ColumnradBridgePortBaseVlanName | read-create | current | An administratively assigned string, which may be used to identify the the port based VLAN. |
| 1.3.6.1.4.1.164.4.1.8.1.1.4 | ColumnradBridgePortBaseVlanEgressPorts | read-create | current | The set of ports which are permanently assigned to the egress list for this port based VLAN by management. The default value of this object is a string of zero… |
| 1.3.6.1.4.1.164.4.1.8.1.1.5 | ColumnradBridgePortBaseVlanVirtualGroups | read-create | current | The set of Virtual Groups which are permanently assigned to this port based VLAN by management. (read Virtual Group instead of port in PortList Textual Convent… |
| 1.3.6.1.4.1.164.4.1.8.1.1.6 | ColumnradBridgePortBaseVlanRowStatus | read-create | current | This object enable user to create/delete entries in this table. |
| 1.3.6.1.4.1.164.4.1.8.1.1.7 | ColumnradBridgePortBaseVlanMng | read-create | current | This object allows user to enable/disable management traffic on this VLAN. disable - only non-management data is allowed. enable - mixture of management traffi… |
| 1.3.6.1.4.1.164.4.1.8.2 | TableradBridgePortVlanMemberTable | not-accessible | current | The Bridge Ports-VLAN Membership table. This table enables the user to assign: - Several VLANs to a Port. - Several Ports to a VLAN. |
| 1.3.6.1.4.1.164.4.1.8.2.1 | RowradBridgePortVlanMemberEntry | not-accessible | current | An entry in the Bridge Ports-VLANs Memebership table. |
| 1.3.6.1.4.1.164.4.1.8.2.1.1 | ColumnradBridgePortVlanMemberBridgeIdx | read-only | current | This object indicates the Bridge Index. |
| 1.3.6.1.4.1.164.4.1.8.2.1.2 | ColumnradBridgePortVlanMemberPortIdx | read-only | current | This object indicates the Bridge's Port Index. For some cases, it can be used as the Port ofIndex. |
| 1.3.6.1.4.1.164.4.1.8.2.1.3 | ColumnradBridgePortVlanMemberVlanId | read-only | current | This object indicates the VLAN ID. |
| 1.3.6.1.4.1.164.4.1.8.2.1.4 | ColumnradBridgePortVlanMemberRowStatus | read-create | current | This object enables the user to create/delete entries in this table. |
| 1.3.6.1.4.1.164.4.1.9 | NoderadBridgeGenCnfg | |||
| 1.3.6.1.4.1.164.4.1.9.1 | TableradBridgeGenFlowTable | not-accessible | current | A table containing static configuration information for Bridge configured into the device by (local or network) management. All entries are permanent and will … |
| 1.3.6.1.4.1.164.4.1.9.1.1 | RowradBridgeGenFlowEntry | not-accessible | current | Static information for a Bridge configured into the device by management. |
| 1.3.6.1.4.1.164.4.1.9.1.1.1 | ColumnradBridgeGenFlowCnfgIdx | not-accessible | current | This object indicates the Idx of the Agent Cnfg the following objects refer. 255=Temporary Cnfg (when relevant Set is done only to this configuration). For Age… |
| 1.3.6.1.4.1.164.4.1.9.1.1.2 | ColumnradBridgeGenFlowIdx | not-accessible | current | For Agent having more than one bridge, this index may be used as bridge index |
| 1.3.6.1.4.1.164.4.1.9.1.1.3 | ColumnradBridgeGenFlowRowStatus | read-create | current | This object enable user to create/delete entries in this table. |
| 1.3.6.1.4.1.164.4.1.9.1.1.4 | ColumnradBridgeGenFlowFloodOrBcastMaxRate | read-create | current | This object controls maximum Flooding or Broadcast Rate: Max number of multicast along with unknown or flooded unicast frames allowed to enter any port. The nu… |
| 1.3.6.1.4.1.164.4.1.9.1.1.5 | ColumnradBridgeGenFlowQosMode | read-create | current | This object controls Quality of Service mode. User may select which field(s) (in case of fields - which one has precedence) will affect prioritization of data … |
| 1.3.6.1.4.1.164.4.1.9.1.1.6 | ColumnradBridgeGenFlowSchedulingMode | read-create | current | This object controls which scheduling mode is used: Weighted Fair Queuing (WFQ) scheme, Strict Priority (SP) or ATM CoS |
| 1.3.6.1.4.1.164.4.1.9.1.1.7 | ColumnradBridgeGenFlowBasicClassification | read-create | current | This object defines whether Classification based on Port should be taken into account (either as default, or in addition to other classifications). |
| 1.3.6.1.4.1.164.4.1.9.1.1.8 | ColumnradBridgeGenFlowMulticastTrafficClass | read-create | current | The Traffic Class the received Multicast frame is mapped to. |
| 1.3.6.1.4.1.164.4.1.9.1.1.9 | ColumnradBridgeGenFlowBroadcastTrafficClass | read-create | current | The Traffic Class the received Broadcast frame is mapped to. |
| 1.3.6.1.4.1.164.4.1.9.1.1.10 | ColumnradBridgeGenFlowUnkownUnicastTrafficClass | read-create | current | The Traffic Class the received Unkonwn Unicast frame is mapped to. |
| 1.3.6.1.4.1.164.4.1.9.2 | TableradBridgeDot1qVlanStaticTable | not-accessible | current | A table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and wi… |
| 1.3.6.1.4.1.164.4.1.9.2.1 | RowradBridgeDot1qVlanStaticEntry | not-accessible | current | Static information for a VLAN configured into the device by (local or network) management. |
| 1.3.6.1.4.1.164.4.1.9.2.1.1 | ColumnradBridgeDot1qVlanTaggedPorts | read-create | current | The set of ports which should transmit egress packets for this VLAN as tagged. |
| 1.3.6.1.4.1.164.4.1.9.2.1.2 | ColumnradBridgeDot1qVlanUnmodifiedPorts | read-create | current | The set of ports which should transmit egress packets for this VLAN as unmodified. |
| 1.3.6.1.4.1.164.4.1.9.2.1.3 | ColumnradBridgeDot1qVlanSplitHorizon | read-create | current | When 'enable (3)', packets having this VLAN will not be switched back to other bridge ports which are members of this VLAN. |
| 1.3.6.1.4.1.164.4.1.9.3 | TableradDot1qPortVlanTable | not-accessible | current | A table containing control and status information for VLAN configuration per port. |
| 1.3.6.1.4.1.164.4.1.9.3.1 | RowradDot1qPortVlanEntry | not-accessible | current | Information controlling VLAN configuration for a port. This is indexed by dot1dBasePort. |
| 1.3.6.1.4.1.164.4.1.9.3.1.1 | ColumnradDot1qPortStacking | read-write | current | This object indicates the port stacking operation: unmodify (2) = Do not add Tag. tag (3) = Add Tag to Untagged Frames. stack (4) = Add Tag to all Frames. |
| 1.3.6.1.4.1.164.4.1.9.3.1.2 | ColumnradDot1qPortCopyOriginVlanPriority | read-write | current | This object indicates whether use the original VLAN Priority of the frame, as the priority of the VLAN added by this port. |
| 1.3.6.1.4.1.164.4.1.9.3.1.3 | ColumnradDot1qPortDefaultVlanPriority | read-write | current | Default VLAN Frame priority of the VLAN added by this port. |
| 1.3.6.1.4.1.164.4.1.9.3.1.4 | ColumnradDot1qPortTagStripping | read-write | current | This object indicates whether remove a tag from the frame on this port, frame with double tag will remain with one tag and frame with one tag will remain untag… |
| 1.3.6.1.4.1.164.4.1.9.3.1.5 | ColumnradDot1qPortEgressTagHandling | read-write | current | This object indicates how is the Egress VLAN Tag processed. It is mainly for use with Double Tagging. |
| 1.3.6.1.4.1.164.4.1.9.3.1.6 | ColumnradDot1qPortIngressTagHandling | read-write | current | This object indicates how is the Ingress VLAN Tag processed. It is mainly for use with Double Tagging. |
| 1.3.6.1.4.1.164.4.1.9.3.1.7 | ColumnradDot1qPortReplaceVlanPriority | read-write | current | This object indicates whether for each received tagged frame on this Bridge Port - VLAN Priority will be replaced by another Priority. no(2) = no repacement ye… |
| 1.3.6.1.4.1.164.4.1.9.3.1.8 | ColumnradDot1qPortVlanEthType | read-write | current | This object indicates the Ethernet Type. For some devices, it is applicable only when radDot1qPortStacking = stack. |
| 1.3.6.1.4.1.164.4.1.9.3.1.9 | ColumnradDot1qPortVlanCnodeLevel1Agent | read-write | current | Specify if a Level 1 cNode agent is enabled or not for the bridge port. |
| 1.3.6.1.4.1.164.4.1.9.4 | TableradBridgeGenCfgTable | not-accessible | current | A table containing Bridge configuration parameters. |
| 1.3.6.1.4.1.164.4.1.9.4.1 | RowradBridgeGenCfgEntry | not-accessible | current | Describes an entry in the radBridgeGenCfgTable. |
| 1.3.6.1.4.1.164.4.1.9.4.1.1 | ColumnradBridgeGenCfgIdx | not-accessible | current | This object indicates the Idx of the Agent Cnfg the following objects refer. 255=Temporary Cnfg. For Agents that support only one Configuration, this object wi… |
| 1.3.6.1.4.1.164.4.1.9.4.1.2 | ColumnradBridgeGenCfgIdx2 | not-accessible | current | For Agents having more than one bridge, this index may be used as bridge index |
| 1.3.6.1.4.1.164.4.1.9.4.1.3 | ColumnradBridgeGenCfgBridgeAction | read-write | current | This variable enables the operator to perform one of the specified actions on the tables maintained by the Bridge. After performing the action, Agent will auto… |
| 1.3.6.1.4.1.164.4.1.9.4.1.4 | ColumnradBridgeAgingTimeSec | read-write | current | This variable duplicates scalar object dot1dTpAgingTimeThe of BRIDGE-MIB with configuration index and Bridge index. It defines the timeout period in seconds fo… |
| 1.3.6.1.4.1.164.4.1.9.4.1.5 | ColumnradBridgeMngVlanId | read-write | current | This variable indicates the VLAN ID used for remote management traffic. 0 = Not Applicable. |
| 1.3.6.1.4.1.164.4.1.9.4.1.6 | ColumnradBridgeLoopDetectVlanId | read-write | current | This variable indicates the VLAN ID used for Loop Detection packets. Valid values: 1 - 4095: VLAN ID 0 - Means that the Loop Detection is Disabled. |
| 1.3.6.1.4.1.164.4.1.9.4.1.7 | ColumnradBridgeSplitHorizon | read-write | current | This object configure 'split horizon' switching between bridge Ports. - disable - normal (VLAN aware) bridge behavior. - enable - all packets, regardless their… |
| 1.3.6.1.4.1.164.4.1.9.4.1.8 | ColumnradBridgeEthType | read-write | current | Value of Ethertype field in Ethernet frame. This field indicates which protocol is being transported in an ethernet frame. |
| 1.3.6.1.4.1.164.4.1.9.5 | ScalarradBridgeAgingTime | read-write | current | This variable defines whether the Aging Time will be finite or infinite. When selecting the finite (3) value, the exact time will be determined by another vari… |
| 1.3.6.1.4.1.164.4.1.9.6 | ScalarradBridgeMngFlow | read-write | current | This variable defines whether the Management Flow is passed through the bridge (enable) or not (disable). |
| 1.3.6.1.4.1.164.4.1.10 | NoderadBridgeStatus | |||
| 1.3.6.1.4.1.164.4.1.10.1 | TableradBridgeInvBasePortTable | not-accessible | current | An inversed table to dot1dBasePortTable from RFC1493 with reduced information. This table index is known to the NMS and this way the needed information can be … |
| 1.3.6.1.4.1.164.4.1.10.1.1 | RowradBridgeInvBasePortEntry | not-accessible | current | The bridge port number for each bridge port interface index. |
| 1.3.6.1.4.1.164.4.1.10.1.1.1 | ColumnradBridgeInvBasePortIfIndex | read-only | current | The value of the instance of the ifIndex object, defined in MIB-II, for the interface corresponding to this Bridge port. |
| 1.3.6.1.4.1.164.4.1.10.1.1.2 | ColumnradBridgeInvBasePort | read-only | current | The Bridge port number. |
| 1.3.6.1.4.1.164.4.1.11 | NoderadBridgeStp | |||
| 1.3.6.1.4.1.164.4.1.11.1 | TableradBridgeStpCnfgTable | not-accessible | current | STP Configuration table. STP=Spanning Tree Protocol. It includes STP configurable parameters that in BRIDGE-MIB are scalars, while we need them per card/bridge… |
| 1.3.6.1.4.1.164.4.1.11.1.1 | RowradBridgeStpCnfgEntry | not-accessible | current | An entry in the radBridgeStpCnfgTable. |
| 1.3.6.1.4.1.164.4.1.11.1.1.1 | ColumnradBridgeStpCnfgIdx1 | not-accessible | current | This object indicates the Index of the Agent Configuration the following objects refer to. For Agents that support more than one configuration: 255=Temporary C… |
| 1.3.6.1.4.1.164.4.1.11.1.1.2 | ColumnradBridgeStpCnfgIdx2 | not-accessible | current | For Agents having the table objects per Card/Bridge/Interface this will be the index of the Card/Bridge/Interface used. |
| 1.3.6.1.4.1.164.4.1.11.1.1.3 | ColumnradBridgeStpCnfgForwardDelay | read-write | current | The value that the bridge of radBridgeStpCnfgIdx2 uses for Forward Delay when this bridge is acting as the root. Note that the range for this parameter is rela… |
| 1.3.6.1.4.1.164.4.1.11.1.1.4 | ColumnradBridgeStpCnfgMaxAge | read-write | current | The value that the bridge of radBridgeStpCnfgIdx2 uses for MaxAge when this bridge is acting as the root. Note that the range for this parameter is related to … |
| 1.3.6.1.4.1.164.4.1.11.1.1.5 | ColumnradBridgeStpCnfgHelloTime | read-write | current | The value that the bridge of radBridgeStpCnfgIdx2 uses for Hello Time when this bridge is acting as the root. The granularity of this timer is specified by 802… |
| 1.3.6.1.4.1.164.4.1.11.1.1.6 | ColumnradBridgeStpCnfgPriority | read-write | current | The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID, per radBridgeStpCnfgIdx2 instance. |
| 1.3.6.1.4.1.164.4.1.11.1.1.7 | ColumnradBridgeStpCnfgStpVersion | read-write | current | This object determines the STP version used: stp - usual Spanning Tree Protocol. rstp - Rapid Spanning Tree Protocol. |
| 1.3.6.1.4.1.164.4.1.11.2 | TableradBridgeStpStatTable | not-accessible | current | STP Status table. STP=Spanning Tree Protocol. It includes STP status parameters that in BRIDGE-MIB are scalars, while we need them per card/bridge/interface. F… |
| 1.3.6.1.4.1.164.4.1.11.2.1 | RowradBridgeStpStatEntry | not-accessible | current | An entry in the radBridgeStpStatTable. |
| 1.3.6.1.4.1.164.4.1.11.2.1.1 | ColumnradBridgeStpStatIdx | not-accessible | current | For Agents having the table objects per Card/Bridge/Interface this will be the index of the Card/Bridge/Interface used. |
| 1.3.6.1.4.1.164.4.1.11.2.1.2 | ColumnradBridgeStpStatForwardDelay | read-only | current | This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The… |
| 1.3.6.1.4.1.164.4.1.11.2.1.3 | ColumnradBridgeStpStatMaxAge | read-only | current | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is … |
| 1.3.6.1.4.1.164.4.1.11.2.1.4 | ColumnradBridgeStpStatHelloTime | read-only | current | The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become … |
| 1.3.6.1.4.1.164.4.1.11.2.1.5 | ColumnradBridgeStpStatDesignatedRoot | read-only | current | The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Ide… |
| 1.3.6.1.4.1.164.4.1.11.2.1.6 | ColumnradBridgeStpStatRootCost | read-only | current | The cost of the path to the root as seen from this bridge. |
| 1.3.6.1.4.1.164.4.1.12 | ScalarradBridgeForwardingMode | read-write | current | This object determines the Bridge Forwarding Mode: transparent - Forward all frames received (not dependent on VLAN). filter - Filter frames received according… |
| 1.3.6.1.4.1.164.4.1.13 | NoderadBridgePort | |||
| 1.3.6.1.4.1.164.4.1.13.1 | TableradBridgePortCnfgTable | not-accessible | current | The Bridge Port Configuration Table. |
| 1.3.6.1.4.1.164.4.1.13.1.1 | RowradBridgePortCnfgEntry | not-accessible | current | An entry in the table. |
| 1.3.6.1.4.1.164.4.1.13.1.1.1 | ColumnradBridgePortCnfgIdx | not-accessible | current | The first index of the table. It can serve for Configuration index, Bridge index or other. |
| 1.3.6.1.4.1.164.4.1.13.1.1.2 | ColumnradBridgePortCnfgPrtIdx | not-accessible | current | This object indicates the Bridge Port index. |
| 1.3.6.1.4.1.164.4.1.13.1.1.3 | ColumnradBridgePortCnfgMaxMacAddr | read-write | current | This object indicates the maximum number of total MAC Addresses (static and learned) supported by this Bridge Port. |
| 1.3.6.1.4.1.164.4.1.13.1.1.4 | ColumnradBridgePortCnfgMngFlow | read-write | current | This object indicates whether this Bridge Port is dedicated for management flow. |
| 1.3.6.1.4.1.164.4.1.13.1.1.5 | ColumnradBridgePortCnfgMcastMode | read-write | current | This object indicates this Bridge Port's Multicast Mode: flooding (1) - flood multicast MAC addresses forwarding (2) - forward multicast MAC addresses to the s… |
| 1.3.6.1.4.1.164.4.1.13.1.1.6 | ColumnradBridgePortCnfgDefaultVpi | read-write | current | This object indicates the VPI of this Bridge Port's Default VCL. An incoming frame with priority that is not assigned to any VCL will be transferred to the Def… |
| 1.3.6.1.4.1.164.4.1.13.1.1.7 | ColumnradBridgePortCnfgDefaultVci | read-write | current | This object indicates the VCI of this Bridge Port's Default VCL. An incoming frame with priority that is not assigned to any VCL will be transferred to the Def… |
| 1.3.6.1.4.1.164.4.1.13.1.1.8 | ColumnradBridgePortCnfgStatVlanId | read-write | current | This object indicates the selected VlanId of the bridge port on which statistics are being collected. 0=no Statistics collected for VLAN on this bridge port. |
| 1.3.6.1.4.1.164.4.1.13.1.1.9 | ColumnradBridgePortCnfgIngressMtu | read-write | current | The size of the largest packet which can be received on the interface, specified in octets. |
| 1.3.6.1.4.1.164.4.1.13.1.1.10 | ColumnradBridgePortCnfgEgressMtu | read-write | current | The size of the largest packet which can be sent on the interface, specified in octets. |
| 1.3.6.1.4.1.164.4.1.13.1.1.11 | ColumnradBridgePortCnfgDot1x | read-write | current | This feature is currently supported via the variable ethIfTable.ethDot1xEnable. Determnines if the Port-Based Network Access Protocol (IEEE-802.1x)is enabled f… |
| 1.3.6.1.4.1.164.4.1.13.1.1.12 | ColumnradBridgePortCnfgMappingProfile | read-write | current | This attribute defines the Queue Mapping Profile ID(cosProfileTable) assigned to this Bridge Port. |
| 1.3.6.1.4.1.164.4.2 | Nodelanranger | |||
| 1.3.6.1.4.1.164.4.2.0 | IdentitylanrangerEvents | current | The events for the LANRANger. | |
| 1.3.6.1.4.1.164.4.2.0.1 | NotificationlanrangerLogLinkUp | current | The lanrangerLogLinkUp trap indicates that the indicated logical link is connected. | |
| 1.3.6.1.4.1.164.4.2.0.2 | NotificationlanrangerLogLinkDown | current | The lanrangerLogLinkDown trap indicates that the indicated logical link is disconnected. | |
| 1.3.6.1.4.1.164.4.2.0.3 | NotificationlanrangerLanTableOverflow | current | The station table has the maximum number of addresses for the LANRANger. | |
| 1.3.6.1.4.1.164.4.2.0.4 | NotificationlanrangerStatusChanged | current | The trap indicates changes in the device status . | |
| 1.3.6.1.4.1.164.4.2.1 | NodelanrangerConfig | |||
| 1.3.6.1.4.1.164.4.2.1.1 | ScalarlanrangerLoc | read-only | current | lanrangerLoc is set to main if the LANRANger is located on the main LAN and it is set to remote if it is located on a LAN at a remote site. |
| 1.3.6.1.4.1.164.4.2.1.2 | ScalarlanrangerBurnAddress | read-only | current | This is the burned-in MacAddress on the LANRANger. |
| 1.3.6.1.4.1.164.4.2.1.3 | ScalarlanrangerLocAddress | read-write | current | This is a locally administered address. If a zero value appears, the network administrator did not set a locally administered address. |
| 1.3.6.1.4.1.164.4.2.1.4 | ScalarlanrangerActiveAddress | read-write | current | The MAC address that is in use on the LANRANger. The address selected will appear in ifPhysAddress. |
| 1.3.6.1.4.1.164.4.2.1.5 | ScalarlanrangerLearningStationTopology | read-write | current | |
| 1.3.6.1.4.1.164.4.2.1.6 | NodelanrangerIpRouterInfo | |||
| 1.3.6.1.4.1.164.4.2.1.6.1 | ScalarlanrangerIpDefaultLink | read-write | current | The default selected link, having the numbering system of ifIndex. The valid values range is: 1..ifIndex. The value must remain constant at least from one re-i… |
| 1.3.6.1.4.1.164.4.2.1.6.2 | ScalarlanrangerIpFastReTxLevel | read-write | current | The maximum buffer depth (queue length) for which lanranger will accept retransmission (for each station; the level is the same for all the stations). The vali… |
| 1.3.6.1.4.1.164.4.2.1.6.3 | ScalarlanrangerIpAgingTimeout | read-write | current | Ip aging time for a station - in min. |
| 1.3.6.1.4.1.164.4.2.1.6.4 | NodelanrangerIpBootP | |||
| 1.3.6.1.4.1.164.4.2.1.6.4.1 | ScalarlanrangerBootPAction | read-write | current | Activating (disable/enable) the BootP operation. |
| 1.3.6.1.4.1.164.4.2.1.6.4.2 | ScalarlanrangerBootPAvailableEntries | read-only | current | The number of available entries in the BootP table. |
| 1.3.6.1.4.1.164.4.2.1.6.4.3 | ScalarlanrangerBootPCurrentEntries | read-only | current | The current number of BootP entries in the BootP table. |
| 1.3.6.1.4.1.164.4.2.1.6.4.4 | TablelanrangerBootPTable | not-accessible | current | A list of BootP entries. The number of entries is up to BootP current entries, according to the LANRANger model. |
| 1.3.6.1.4.1.164.4.2.1.6.4.4.1 | RowlanrangerBootPEntry | not-accessible | current | BootP parameters per entry of the BootP table. |
| 1.3.6.1.4.1.164.4.2.1.6.4.4.1.1 | ColumnlanrangerBootPIpAddress | read-only | current | BootP Ip Address. |
| 1.3.6.1.4.1.164.4.2.1.6.4.4.1.2 | ColumnlanrangerBootPIfIndex | read-only | current | The number is the same as the ifIndex of the link. |
| 1.3.6.1.4.1.164.4.2.1.6.4.4.1.3 | ColumnlanrangerBootPOperation | read-write | current | This object indicates the status of this entry. active(1) - this entry is currently in use and will remain so even after the next reset of the LANRANger. delet… |
| 1.3.6.1.4.1.164.4.2.1.7 | NodelanrangerSpoofingInfo | |||
| 1.3.6.1.4.1.164.4.2.1.7.1 | ScalarlanrangerSpoofingAction | read-write | current | |
| 1.3.6.1.4.1.164.4.2.1.7.2 | ScalarlanrangerSpoofingAgingStation | read-write | current | |
| 1.3.6.1.4.1.164.4.2.2 | NodelanrangerInterface | |||
| 1.3.6.1.4.1.164.4.2.2.1 | TablelanrangerLinkTable | not-accessible | current | A list of link entries. The number of entries is up to 8, according to the LANRANger model. |
| 1.3.6.1.4.1.164.4.2.2.1.1 | RowlanrangerLinkEntry | not-accessible | current | LANRANger-specific parameter values for a link. |
| 1.3.6.1.4.1.164.4.2.2.1.1.1 | ColumnlanrangerLinkIndex | read-only | current | A unique value for each link, equal to the value of ifIndex. The value for each link must remain constant at least from one re-initialization of the network ma… |
| 1.3.6.1.4.1.164.4.2.2.1.1.2 | ColumnlanrangerLinkType | read-write | current | The link type . |
| 1.3.6.1.4.1.164.4.2.2.1.1.3 | ColumnlanrangerLinkState | read-write | current | The link is disabled, enabled or backup. |
| 1.3.6.1.4.1.164.4.2.2.1.1.4 | ColumnlanrangerLinkDTRMode | read-only | current | The link DTR mode. |
| 1.3.6.1.4.1.164.4.2.2.1.1.5 | ColumnlanrangerLinkStatus | read-only | current | The link physical status . |
| 1.3.6.1.4.1.164.4.2.2.1.1.6 | ColumnlanrangerLinkConnectionStatus | read-only | current | The link connection status. |
| 1.3.6.1.4.1.164.4.2.2.1.1.7 | ColumnlanrangerLinkNumOfLogLinks | read-only | current | The number of logical links on this physical link. 0 = noLogicalLink |
| 1.3.6.1.4.1.164.4.2.2.1.1.8 | ColumnlanrangerLinkReset | read-write | current | Setting this attribute to ON will reset the link . Upon completion the value will be set to OFF |
| 1.3.6.1.4.1.164.4.2.2.1.1.9 | ColumnlanrangerLinkRxMaskedFrames | read-only | current | The number of masked frames received on this physical link. |
| 1.3.6.1.4.1.164.4.2.2.1.1.10 | ColumnlanrangerLinkLayer2Type | read-write | current | The link layer 2 type indicates whether the link is Bridge or Router and specifies the Router's type. |
| 1.3.6.1.4.1.164.4.2.2.1.1.11 | ColumnlanrangerLinkLayer3Type | read-write | current | The link layer 3 type indicates the protocol type. |
| 1.3.6.1.4.1.164.4.2.2.1.1.12 | ColumnlanrangerBackupLink | read-write | current | The backup link interface index located in the two LSB bytes. If the link is FR type, the two MSB will contain a DLCi number. For other link types the two MSB … |
| 1.3.6.1.4.1.164.4.2.2.1.1.13 | ColumnwrWanThrottle | read-write | current | Throttle controls the baud rate of the WAN. For example if we have a WAN rate of 2M but we want only 1/2 M as the baud rate we set the Wan Throttle to 512k. Th… |
| 1.3.6.1.4.1.164.4.2.2.1.1.14 | ColumnwrIpTransparentMode | read-write | current | This parameter shows whether the IP Transparent mode is enabled. When this mode is enabled, all frames (including broadcast and multicast frames) are forwarded… |
| 1.3.6.1.4.1.164.4.2.2.1.1.15 | ColumnwrIpTransparentGateway | read-write | current | The gateway used for transparent IP. |
| 1.3.6.1.4.1.164.4.2.2.1.1.16 | ColumnlanrangerLinkProtocolType | read-write | current | This parameter indicates the routing protocol running on this Interface. |
| 1.3.6.1.4.1.164.4.2.2.2 | NodelanrangerLinkConnection | |||
| 1.3.6.1.4.1.164.4.2.2.2.1 | ScalarlanrangerConnMaxEntries | read-only | current | The maximum number of entries in the Connection table. |
| 1.3.6.1.4.1.164.4.2.2.2.2 | ScalarlanrangerConnCurrentEntries | read-only | current | The current number of entries in the Connection table. |
| 1.3.6.1.4.1.164.4.2.2.2.3 | TablelanrangerLinkConnTable | not-accessible | current | A list of Connection entries. The number of entries is up to Max entries, according to the LANRANger model. |
| 1.3.6.1.4.1.164.4.2.2.2.3.1 | RowlanrangerLinkConnEntry | not-accessible | current | Information about LANRANger Connection. |
| 1.3.6.1.4.1.164.4.2.2.2.3.1.1 | ColumnlanrangerLinkConnPhysLink | read-only | current | The lanrangerLinkIndex for the physical link with which this logical link is associated. |
| 1.3.6.1.4.1.164.4.2.2.2.3.1.2 | ColumnlanrangerLinkConnAid | read-only | current | A unique value for each logical link. The maximum number of logical links is 256, according to the LANRANger model. The value for each logical link must remain… |
| 1.3.6.1.4.1.164.4.2.2.2.3.1.3 | ColumnlanrangerLinkConnMacAddr | read-only | current | The MAC address of the device that the logical link is connected to on the remote LAN. |
| 1.3.6.1.4.1.164.4.2.2.2.3.1.4 | ColumnlanrangerLinkConnStatus | read-only | current | The link connection status. |
| 1.3.6.1.4.1.164.4.2.2.2.3.1.5 | ColumnlanrangerLinkConnDeviceType | read-only | current | The type of device that the logical link is connected to on the remote LAN. |
| 1.3.6.1.4.1.164.4.2.2.2.3.1.6 | ColumnlanrangerLinkConnDeviceName | read-only | current | The logical name of the device that the logical link is connected to on the remote LAN. |
| 1.3.6.1.4.1.164.4.2.2.2.3.1.7 | ColumnlanrangerLinkConnDeviceSWVer | read-only | current | SW Version of the device that the logical link is connected to, on the remote LAN. |
| 1.3.6.1.4.1.164.4.2.2.2.3.1.8 | ColumnlanrangerLinkConnNumLanStation | read-only | current | The number of stations of the remote LAN. |
| 1.3.6.1.4.1.164.4.2.2.2.3.1.9 | ColumnlanrangerLinkSyncStatus | read-only | current | The Sync link status. |
| 1.3.6.1.4.1.164.4.2.2.3 | TablelanrangerModemTable | not-accessible | current | A list of Modem entries. The number of entries is up to ifIndex. |
| 1.3.6.1.4.1.164.4.2.2.3.1 | RowlanrangerModemEntry | not-accessible | current | LANRANger-specific parameter values for a Modem. |
| 1.3.6.1.4.1.164.4.2.2.3.1.1 | ColumnlanrangerModemLinkIndex | read-only | current | A list of asynchronous ports of the link, according to ifIndex. Synchronous ports will not appear in this table. Their port number will be skipped. |
| 1.3.6.1.4.1.164.4.2.2.3.1.2 | ColumnlanrangerModemName | read-write | current | The Modem Name identifier for MBE/TRE. Up to 50 characters. |
| 1.3.6.1.4.1.164.4.2.2.3.1.3 | ColumnlanrangerModemSettingString | read-write | current | Modem setting String. Up to 80 characters. |
| 1.3.6.1.4.1.164.4.2.2.3.1.4 | ColumnlanrangerModemAutobaudingSpeed | read-write | current | Enable or disable autobauding. When the Autobauding feature is enabled, the MBE/TRE automatically ranges over various Baud rates, starting with 115.2 Kbps, unt… |
| 1.3.6.1.4.1.164.4.2.2.3.1.5 | ColumnlanrangerModemResetBeforeSetup | read-write | current | Reset the modem before setup is performed. It is recommended to reset the modem before modem setup session. |
| 1.3.6.1.4.1.164.4.2.2.3.1.6 | ColumnlanrangerModemAnalyzeAnswers | read-write | current | Enable this option if a modem using non-standard answering is used. When this mode is enabled, the MBE/TRE awaits modem answers 'CONNECT', 'CARRIER', or 'OK', … |
| 1.3.6.1.4.1.164.4.2.2.3.1.7 | ColumnlanrangerModemSpeaker | read-write | current | Toggle the Modem Speaker On or Off . |
| 1.3.6.1.4.1.164.4.2.2.3.1.8 | ColumnlanrangerModemDialingNumber | read-write | current | Various command switches listed in Modem Dialing Number Menu allows selection of tone, pulse-dialing, or various wait states. P - Set Pulse dialing number . T … |
| 1.3.6.1.4.1.164.4.2.2.3.1.9 | ColumnwrLocalDialBackNumber | read-write | current | This is the number that the Remote Modem will use to call the local Modem at Dial Back. Various command switches listed in Modem Dialing Number Menu allows sel… |
| 1.3.6.1.4.1.164.4.2.2.3.1.10 | ColumnwrRingsBeforeAnswer | read-write | current | Determines which ring the modem will wait to answer the phone on. |
| 1.3.6.1.4.1.164.4.2.2.3.1.11 | ColumnlanrangerModemDialRetries | read-write | current | The number of dialing retries requested. Default = 0 |
| 1.3.6.1.4.1.164.4.2.2.4 | TablelanrangerLinkPktSwTable | not-accessible | current | A list of X.25/FR modules entries. The number of entries is up to ifIndex. |
| 1.3.6.1.4.1.164.4.2.2.4.1 | RowlanrangerLinkPktSwEntry | not-accessible | current | LANRANger-specific parameter values for X.25/FR modules. |
| 1.3.6.1.4.1.164.4.2.2.4.1.1 | ColumnlanrangerLinkPktSwIndex | read-only | current | A unique value for each X.25/FR of the link, according to numbering system of ifIndex. The maximum number of links is ifIndex. The value for each link must rem… |
| 1.3.6.1.4.1.164.4.2.2.4.1.2 | ColumnlanrangerLinkPktSwType | read-only | current | Packet Switch Type. |
| 1.3.6.1.4.1.164.4.2.2.4.1.3 | ColumnlanrangerLinkPktSwControlSignal | read-write | current | Packet Switch control command. |
| 1.3.6.1.4.1.164.4.2.2.4.1.4 | ColumnlanrangerLinkPktSwSpeed | read-write | current | The Pkt Switch port's speed in bits per second. Range: 1200bps .. 1544000bps |
| 1.3.6.1.4.1.164.4.2.2.4.1.5 | ColumnlanrangerLinkPktSwConfigParity | read-write | current | The Pkt Switch Config port's character parity bit. Applicable only for x25FRConfigChannel. For x25FRChannel the value notApplicable applies. |
| 1.3.6.1.4.1.164.4.2.2.4.1.6 | ColumnlanrangerLinkPktSwConfigStopBit | read-write | current | The Pkt Switch Config port's number of stop bits. Applicable only for x25FRConfigChannel. For x25FRChannel the value notApplicable applies. |
| 1.3.6.1.4.1.164.4.2.2.4.1.7 | ColumnlanrangerLinkPktSwResetModule | read-write | current | Reset command to Pkt Switch module. Applicable only for x25FRChannel. The command will have no effect on x25FRConfigChannel. |
| 1.3.6.1.4.1.164.4.2.2.5 | TablewrPPPTable | not-accessible | current | This table contains only parameters that do not exist in the PPP standard MIBS. The table contains a list of PPP entries. The number of entries is up to ifInde… |
| 1.3.6.1.4.1.164.4.2.2.5.1 | RowwrPPPEntry | not-accessible | current | LANRANger-specific parameter values for a PPP. |
| 1.3.6.1.4.1.164.4.2.2.5.1.1 | ColumnwrPPPCompressionHeaderField | read-write | current | This configuration option provides a method to negotiate the compression of the Data Link Layer Address and Control fields. This configuration option is sent t… |
| 1.3.6.1.4.1.164.4.2.2.5.1.2 | ColumnwrPPPCompressionProtocolFields | read-write | current | This configuration option provides a method to negotiate the compression of the PPP Protocol field. This configuration option is sent to inform the peer that t… |
| 1.3.6.1.4.1.164.4.2.2.5.1.3 | ColumnwrPPPSTACCompressionType | read-write | current | The PPP compression control protocol provides a method to negotiate and utilize compression protocol over PPP encapsulated links. These are Different types of … |
| 1.3.6.1.4.1.164.4.2.2.5.1.4 | ColumnwrPPPAuthProtocol | read-write | current | The type of authentication protocol being used. The left parameter is the maximum authentication, the right parameter is minimum authentication. |
| 1.3.6.1.4.1.164.4.2.2.5.1.5 | ColumnwrPPPSecurityType | read-write | current | Type of unit. |
| 1.3.6.1.4.1.164.4.2.2.5.1.6 | ColumnwrPPPUserName | read-write | current | PPP User name. |
| 1.3.6.1.4.1.164.4.2.2.5.1.7 | ColumnwrPPPPassword | read-write | current | PPP Password . |
| 1.3.6.1.4.1.164.4.2.2.5.1.8 | ColumnwrPPPLinkActiveTime | read-write | current | PPP link active time in seconds Values range: 2 - 900. Default value = 2 |
| 1.3.6.1.4.1.164.4.2.2.5.1.9 | ColumnwrPPPIPCPSubnetMaskNegotiation | read-write | current | This object indicates the ifIndex of the link (LAN port) through which IPCP Subnet Mask negotiation is allowed. The distinguished value of zero may be used if … |
| 1.3.6.1.4.1.164.4.2.2.5.1.10 | ColumnwrPPPLinkControlProtocolStatus | read-only | current | PPP Link Control Protocol(LCP) Status |
| 1.3.6.1.4.1.164.4.2.2.5.1.11 | ColumnwrPPPAuthenticationStatus | read-only | current | PPP Authentication status. |
| 1.3.6.1.4.1.164.4.2.2.5.1.12 | ColumnwrPPPIpcpStatus | read-only | current | IPCP (IP Control Protocol) status. |
| 1.3.6.1.4.1.164.4.2.2.5.1.13 | ColumnwrPPPAssignedIPAddress | read-only | current | IP Address assigned by PPP. |
| 1.3.6.1.4.1.164.4.2.2.5.1.14 | ColumnwrPPPActualAuthProtocol | read-only | current | The Actual type of Authentication Protocol that is used. |
| 1.3.6.1.4.1.164.4.2.2.5.1.15 | ColumnwrPPPIpTranslationMode | read-write | current | This object enables the IP Translation Mode. |
| 1.3.6.1.4.1.164.4.2.2.5.1.16 | ColumnwrPPPTranslatedIpAddr | read-write | current | This object represents the Translated IP Address. It is relevant only when IP Translation Mode is 'enable'. |
| 1.3.6.1.4.1.164.4.2.2.6 | TablewrMLPPPTable | not-accessible | current | This table contains a list of ML-PPP entries. |
| 1.3.6.1.4.1.164.4.2.2.6.1 | RowwrMLPPPEntry | not-accessible | current | Specific parameter values for a ML-PPP. |
| 1.3.6.1.4.1.164.4.2.2.6.1.1 | ColumnwrMLPPPEpDiscriminatorEnable | read-write | current | Indicates whether the Endpoint Discriminator Option is enabled. The Endpoint Discriminator Option represents identification of the system transmitting the pack… |
| 1.3.6.1.4.1.164.4.2.2.6.1.2 | ColumnwrMLPPPReorderingEnable | read-write | current | Indicates whether packets reordering option is enabled. yes - packets received from MLPPP not in order are reordered, according to sequence number, before bein… |
| 1.3.6.1.4.1.164.4.2.2.6.1.3 | ColumnwrMLPPPTxQueueSize | read-write | current | Indicates the number of frames in the Tx Queue. |
| 1.3.6.1.4.1.164.4.2.2.7 | NodepPPoE | |||
| 1.3.6.1.4.1.164.4.2.2.7.1 | TablepPPoETable | not-accessible | current | The PPPoE (Point-to-Point Protocol over Ethernet) Table. |
| 1.3.6.1.4.1.164.4.2.2.7.1.1 | RowpPPoEEntry | not-accessible | current | An entry in the PPPoE Table. |
| 1.3.6.1.4.1.164.4.2.2.7.1.1.1 | ColumnpPPoECnfgIdx | not-accessible | current | This object represents the first index of the table. It can serve for Configuration index or other. |
| 1.3.6.1.4.1.164.4.2.2.7.1.1.2 | ColumnpPPoEID | not-accessible | current | This object represents the PPPoE unique Identifier. |
| 1.3.6.1.4.1.164.4.2.2.7.1.1.3 | ColumnpPPoERowStatus | read-create | current | This object enables the user to create/delete entries in this table. |
| 1.3.6.1.4.1.164.4.2.2.7.1.1.4 | ColumnpPPoEACName | read-create | current | This object represents the Name of the Access Concentrator, with which the PPPoE session should be established. |
| 1.3.6.1.4.1.164.4.2.2.7.1.1.5 | ColumnpPPoEServiceName | read-create | current | This object represents the Name of a specific Service that will be requested on this PPPoE session. |
| 1.3.6.1.4.1.164.4.2.2.7.1.1.6 | ColumnpPPoEEntityPointer | read-create | current | This parameter represents the entity (interface/port etc) that is connected to this PPPoE. The value of this parameter is a pointer to an existing row of a tab… |
| 1.3.6.1.4.1.164.4.2.2.7.1.1.7 | ColumnpPPoESessionStatus | read-only | current | This object represents the Status of the PPPoE session. |
| 1.3.6.1.4.1.164.4.2.2.7.1.1.8 | ColumnpPPoESessionID | read-only | current | This object represents PPPoE Session ID. |
| 1.3.6.1.4.1.164.4.2.2.7.1.1.9 | ColumnpPPoERemoteMacAddr | read-only | current | This object represents the MAC Address of the Access Concentrator, with which the PPPoE session is established. |
| 1.3.6.1.4.1.164.4.2.2.7.1.1.10 | ColumnpPPoENoOfUsages | read-only | current | This object represents the number of times this PPPoE is used. |
| 1.3.6.1.4.1.164.4.2.2.7.1.1.11 | ColumnpPPoESchedRestartMode | read-create | current | This object represents Scheduled Restart Mode. |
| 1.3.6.1.4.1.164.4.2.2.7.1.1.12 | ColumnpPPoESchedRestartTime | read-create | current | This object represents Scheduled Restart Time. It is relevant only when Scheduled Restart Mode is 'enable'. |
| 1.3.6.1.4.1.164.4.2.2.7.1.1.13 | ColumnpPPoESchedRestartRandomRange | read-create | current | This object represents Scheduled Restart Random Range (in seconds). It is relevant only when Scheduled Restart Mode is 'enable'. A scheduled restart Random VAL… |
| 1.3.6.1.4.1.164.4.2.2.7.1.1.14 | ColumnpPPoESchedRestartActualTime | read-only | current | This object represents Scheduled Restart Actual Time. It is relevant only when Scheduled Restart Mode is 'enable'. For calculation of this time - see pPPoESche… |
| 1.3.6.1.4.1.164.4.2.2.7.1.1.15 | ColumnpPPoEInitDelayRandomRange | read-create | current | This object represents the Initialization Delay Random Range (in seconds). An initialization DELAY (number of seconds) is selected within this Random Range. Th… |
| 1.3.6.1.4.1.164.4.2.2.7.1.1.16 | ColumnpPPoEInitActualDelay | read-only | current | This object represents Initialization Delay (in seconds), as selected within Initialization Delay Random Range (pPPoEInitDelayRandomRange). |
| 1.3.6.1.4.1.164.4.2.2.7.1.1.17 | ColumnpPPoEVlanTagging | read-create | current | This object represents the VLAN Tagging. |
| 1.3.6.1.4.1.164.4.2.2.7.1.1.18 | ColumnpPPoEVlanId | read-create | current | This object represents the VLAN ID. |
| 1.3.6.1.4.1.164.4.2.2.7.1.1.19 | ColumnpPPoEVlanPriority | read-create | current | This object represents the VLAN Priority. |
| 1.3.6.1.4.1.164.4.2.3 | NodelanrangerStation | |||
| 1.3.6.1.4.1.164.4.2.3.1 | TablelanrangerStationTable | not-accessible | current | A table that contains information about the stations on the remote LAN(s). A remote LANRANger contains a list of stations on its LAN, while a main LANRANger co… |
| 1.3.6.1.4.1.164.4.2.3.1.1 | RowlanrangerStationEntry | not-accessible | current | Information about a specific station, that the LANRANger lists as being on a remote LAN. |
| 1.3.6.1.4.1.164.4.2.3.1.1.1 | ColumnlanrangerStationPhysLink | read-only | current | The number of the physical link that is connected to the remote LAN on which the station with the associated instance of lanrangerStationAddress is located. Th… |
| 1.3.6.1.4.1.164.4.2.3.1.1.2 | ColumnlanrangerStationLogLink | read-only | current | The number of the logical link that is connected to the remote LAN on which the station with the associated instance of lanrangerStationAddress is located. The… |
| 1.3.6.1.4.1.164.4.2.3.1.1.3 | ColumnlanrangerStationAddress | read-only | current | The unicast MAC address of a station that the LANRANger lists as being on a remote LAN. |
| 1.3.6.1.4.1.164.4.2.3.1.1.4 | ColumnlanrangerStationStatus | read-only | current | The status of this entry. The meanings of the values are: unknown(1) : learned(2) : the value of the corresponding instance of lanrangerStationAddress was lear… |
| 1.3.6.1.4.1.164.4.2.3.1.1.5 | ColumnlanrangerStationSpoofingStatus | read-only | current | The spoofing status of this entry. |
| 1.3.6.1.4.1.164.4.2.3.2 | ScalarlanrangerLanMaxStations | read-only | current | The maximum number of stations in the station table. |
| 1.3.6.1.4.1.164.4.2.3.3 | ScalarlanrangerLanCurrentStations | read-only | current | The current number of stations in the station table. |
| 1.3.6.1.4.1.164.4.2.3.4 | NodelanrangerPermanentStation | |||
| 1.3.6.1.4.1.164.4.2.3.4.1 | ScalarlanrangerPermanentMaxEntries | read-only | current | The maximum number of entries in the permanent stations table. |
| 1.3.6.1.4.1.164.4.2.3.4.2 | ScalarlanrangerPermanentCurrentEntries | read-only | current | The current number of entries in the permanent stations table. |
| 1.3.6.1.4.1.164.4.2.3.4.3 | TablelanrangerPermanentTable | not-accessible | current | A table containing address information configured into the LANRANger by (local or network) management, specifying addresses on a remote LAN. This table objects… |
| 1.3.6.1.4.1.164.4.2.3.4.3.1 | RowlanrangerPermanentEntry | not-accessible | current | Address information configured into the remote LANRANger by (local or network) management specifying addresses on a remote LAN. |
| 1.3.6.1.4.1.164.4.2.3.4.3.1.1 | ColumnlanrangerPermanentIfIndex | read-only | current | The number of the physical link that is connected to the remote LAN, on which the station with the associated instance of lanrangerStationAddress is located. T… |
| 1.3.6.1.4.1.164.4.2.3.4.3.1.2 | ColumnlanrangerPermanentLogLink | read-only | current | The number of the logical link that is connected to the remote LAN, on which the station with the associated instance of lanrangerPermanentAddress is located. … |
| 1.3.6.1.4.1.164.4.2.3.4.3.1.3 | ColumnlanrangerPermanentAddress | read-only | current | |
| 1.3.6.1.4.1.164.4.2.3.4.3.1.4 | ColumnlanrangerPermanentOperation | read-write | current | |
| 1.3.6.1.4.1.164.4.2.3.5 | NodelanrangerIpStation | |||
| 1.3.6.1.4.1.164.4.2.3.5.1 | ScalarlanrangerIpPermanentAvailableEntries | read-only | current | The available number of entries in the IP permanent stations table. |
| 1.3.6.1.4.1.164.4.2.3.5.2 | ScalarlanrangerIpPermanentCurrentEntries | read-only | current | The current number of entries in the IP permanent station table. |
| 1.3.6.1.4.1.164.4.2.3.6 | NodelanrangerSpoofingStation | |||
| 1.3.6.1.4.1.164.4.2.3.6.1 | ScalarlanrangerSpoofingMaxEntries | read-only | current | The maximum number of entries in the Spoofing station table. |
| 1.3.6.1.4.1.164.4.2.3.6.2 | ScalarlanrangerSpoofingCurrentEntries | read-only | current | The current number of entries in the Spoofing station table. |
| 1.3.6.1.4.1.164.4.2.3.6.3 | TablelanrangerSpoofingTable | not-accessible | current | |
| 1.3.6.1.4.1.164.4.2.3.6.3.1 | RowlanrangerSpoofingEntry | not-accessible | current | Spoofing parameters per entry of the Spoofing table. |
| 1.3.6.1.4.1.164.4.2.3.6.3.1.1 | ColumnlanrangerSpoofingGroup | read-only | current | The spoofing group. Only the LOCAL Lanranger will show this table ! |
| 1.3.6.1.4.1.164.4.2.3.6.3.1.2 | ColumnlanrangerSpoofingMacAddress | read-only | current | MAC Address of the Remote Lanrangers. Only the LOCAL Lanranger will show this table ! |
| 1.3.6.1.4.1.164.4.2.3.6.3.1.3 | ColumnlanrangerSpoofingAging | read-only | current | Aging time defined for a whole group, in minutes. Only the LOCAL Lanranger will show this table ! |
| 1.3.6.1.4.1.164.4.2.3.6.3.1.4 | ColumnlanrangerSpoofingTimeLeft | read-only | current | Time until aging expires, per station, in minutes. Only the LOCAL Lanranger will show this table ! |
| 1.3.6.1.4.1.164.4.3 | Nodetrim | |||
| 1.3.6.1.4.1.164.4.3.1 | NodetrimInterface | |||
| 1.3.6.1.4.1.164.4.3.1.1 | TabletrimIfTable | not-accessible | current | RAD-specific interface table. |
| 1.3.6.1.4.1.164.4.3.1.1.1 | RowtrimIfEntry | not-accessible | current | An entry in table trimIfTable. |
| 1.3.6.1.4.1.164.4.3.1.1.1.1 | ColumntrimIfIndex | read-only | current | Index to the Trimbridge Interface Table. The interface defined by a particular value of this index is the same interface as identified by the same value of ifI… |
| 1.3.6.1.4.1.164.4.3.1.1.1.2 | ColumntrimIfBoardNum | read-only | current | Reserved for possible future use. Not currently applicable to Trimbridge. |
| 1.3.6.1.4.1.164.4.3.1.1.1.3 | ColumntrimIfNetAddress | read-only | current | The IP address of the interface defined by the particular value of trimIfIndex. |
| 1.3.6.1.4.1.164.4.3.1.1.1.4 | ColumntrimIfStatus | read-only | current | The current status of the interface. Some of these status values are not applicable to Trimbridge. |
| 1.3.6.1.4.1.164.4.3.1.1.1.5 | ColumntrimIfClockType | read-write | current | trimIfClockType defines the type of clock each interface uses: internal or external. |
| 1.3.6.1.4.1.164.4.3.1.1.1.6 | ColumntrimIfBaudRate | read-write | current | Defines the baud rate in use by the interface. The valid rates are determined by the type of the media for which this baud rate is defined. |
| 1.3.6.1.4.1.164.4.3.1.1.1.7 | ColumntrimIfCost | read-write | current | This object is inapplicable to Trimbridge. |
| 1.3.6.1.4.1.164.4.3.1.1.1.8 | ColumntrimIfCompression | read-write | current | Defines whether data compression is enabled or disabled for the interface. |
| 1.3.6.1.4.1.164.4.3.1.1.1.9 | ColumntrimIfCompressionStatus | read-only | current | Defines the status of the compression component: not-inserted - compression component is not in the device active - compression is enabled and operates correct… |
| 1.3.6.1.4.1.164.4.3.1.1.1.10 | ColumntrimIfCompressionRate | read-only | current | Percentage of compression. This variable applies only if trimCompressionStatus is active. |
| 1.3.6.1.4.1.164.4.3.1.1.1.11 | ColumntrimIfLATCompression | read-write | current | Enable/Disable the LAT Compression. |
| 1.3.6.1.4.1.164.4.3.1.1.1.12 | ColumntrimIfCompressionType | read-only | current | This parameter indicates the type of compression option available in the device. `None(1) - indicates that there is no compression option in the device lowSpee… |
| 1.3.6.1.4.1.164.4.3.1.1.1.13 | ColumntrimIfFilterMode | read-write | current | This parameter indicates the type of filtering in the device. |
| 1.3.6.1.4.1.164.4.3.1.1.1.14 | ColumntrimIfConType | read-only | current | This parameter indicates the connector type of an interface. |
| 1.3.6.1.4.1.164.4.3.1.1.1.15 | ColumntrimIfRemAddress | read-write | current | |
| 1.3.6.1.4.1.164.4.3.1.1.1.16 | ColumntrimIfLocSubAddress | read-write | current | Space is not valid. If the string includes a space, the whole entry is considered not valid. |
| 1.3.6.1.4.1.164.4.3.1.1.1.17 | ColumntrimIfRemSubAddress | read-write | current | Space is not valid. If the string includes a space, the whole entry is considered not valid. |
| 1.3.6.1.4.1.164.4.3.1.1.1.18 | ColumntrimIfCLIVerification | read-write | current | Enables/Disables verification of Control Line Identification (CLI) |
| 1.3.6.1.4.1.164.4.3.1.2 | NodetrimRS232Conf | |||
| 1.3.6.1.4.1.164.4.3.1.2.1 | ScalartrimBaudRate | read-write | current | Selects the baud rate used by the RS232 management interface. The default selection is 1200 bits/second. |
| 1.3.6.1.4.1.164.4.3.1.2.2 | ScalartrimParity | read-write | current | Determines whether the parity bit will be used and determines its type. |
| 1.3.6.1.4.1.164.4.3.1.2.3 | ScalartrimStopBit | read-write | current | Selects the number of stop bits appended to the end of each data word. |
| 1.3.6.1.4.1.164.4.3.1.3 | NodetrimThresholdRep | |||
| 1.3.6.1.4.1.164.4.3.1.3.1 | TabletrimIfThresholdRepTable | not-accessible | current | ..... |
| 1.3.6.1.4.1.164.4.3.1.3.1.1 | RowtrimIfThresholdRepEntry | not-accessible | current | An entry in table trimIfThresholdRepTable. |
| 1.3.6.1.4.1.164.4.3.1.3.1.1.1 | ColumntrimIfThreRepId | read-only | current | The Interface number serves as an index to the Threshold Reoprt Table. |
| 1.3.6.1.4.1.164.4.3.1.3.1.1.2 | ColumntrimIfThreRepCounterId | read-only | current | The Counter ID serves as an index to the Threshold Reoprt Table, and identify the counter for which to pot the threshold. |
| 1.3.6.1.4.1.164.4.3.1.3.1.1.3 | ColumntrimThresholdValue | read-write | current | The Threshold value , this is the maximum rate of counter increments before the element issue trap. |
| 1.3.6.1.4.1.164.4.3.1.3.1.1.4 | ColumntrimIfThreRepSampleRate | read-write | current | The network object will sample the counter atthis interval. When this parameter is set to 0, the treshold comparison is disable. |
| 1.3.6.1.4.1.164.4.3.1.3.1.1.5 | ColumntrimIfThreRepTrapRate | read-write | current | The network object will issue a trap according to this interval. Note that the trape interval nust be equal or larger then trimIfThreRepSampleRate. |
| 1.3.6.1.4.1.164.4.3.2 | NodetrimBackup | |||
| 1.3.6.1.4.1.164.4.3.2.1 | ScalartrimBackupState | read-only | current | If main - the bridge is connected via the main physical link. If backup - the automatic backup feature was enabled and the bridge is connected via the backup p… |
| 1.3.6.1.4.1.164.4.3.2.2 | ScalartrimDialUpStatus | read-write | current | This parameter controls the operation of dial-up backup function. If status is disable(2), dial-up backup will not be initiated when the main link fails or exc… |
| 1.3.6.1.4.1.164.4.3.2.3 | ScalartrimBackLinkType | read-write | current | This variable specifies the type of the backup link. If the type is leased(2), Trimbridge will reroute traffic to the backup link, when main link fails. If the… |
| 1.3.6.1.4.1.164.4.3.2.4 | ScalartrimDialUpMode | read-write | current | If the mode is originate(1), Trimbridge initiates the backup procedure when the main link fails. if the mode is answer(2), it expects that the bridge on the ot… |
| 1.3.6.1.4.1.164.4.3.2.5 | ScalartrimDialUpErrorThreshold | read-write | current | Error rate on main link at which Backup will be enabled. low - 1*10-5 medium - 5*10-4 high - 1*10-3 If none(1) is selected, then backup is not invoked when the… |
| 1.3.6.1.4.1.164.4.3.2.6 | ScalartrimDialUpRedialTimeout | read-write | current | If an attempt to dial up failed for the specified time, a new redial attempt will be initiated. |
| 1.3.6.1.4.1.164.4.3.2.7 | ScalartrimDialUpRedialNum | read-write | current | This variable specifies the number of times to initiate the dial-up procedure. If the number of redials is set to zero (0), then the number of redials will be … |
| 1.3.6.1.4.1.164.4.3.2.8 | ScalartrimBackUpConnectDelay | read-write | current | The connect delay defines the minimum time period that the link must be disconnected. |
| 1.3.6.1.4.1.164.4.3.2.9 | ScalartrimBackUpDisConnectDelay | read-write | current | The disconnect delay defines the delay between the last valid traffic trigger and link disconnection. |
| 1.3.6.1.4.1.164.4.3.2.10 | TabletrimBackUpScheduleTable | not-accessible | current | This is a table that contains the reroute shedule for the backup link. The index is the day of the week, starting with 1 for Sunday, ending with 7 for Saturday. |
| 1.3.6.1.4.1.164.4.3.2.10.1 | RowtrimBackUpEntry | not-accessible | current | An entry in table trimBackUpScheduleTable. |
| 1.3.6.1.4.1.164.4.3.2.10.1.1 | ColumntrimBackUpDay | read-only | current | The day of the week for which the entry applies. The days are numbered from 1 to 7, representing Monday through Sunday. |
| 1.3.6.1.4.1.164.4.3.2.10.1.2 | ColumntrimBackUpFromTo | read-write | current | This is the time during which backup should be disabled, expressed as xx:xx-yy:yy, where x's reflect the time from and y's reflect the time to. The first two d… |
| 1.3.6.1.4.1.164.4.3.2.11 | ScalartrimBackUpDelayAfterFailure | read-write | current | This entry defines the delay between the last @@@@ |
| 1.3.6.1.4.1.164.4.3.3 | NodetrimTR | |||
| 1.3.6.1.4.1.164.4.3.3.1 | TabletrimTRIfTable | not-accessible | current | This table defines configuration parameters for Token Ring interfaces in the Trimbridge-16. |
| 1.3.6.1.4.1.164.4.3.3.1.1 | RowtrimTRIfEntry | not-accessible | current | An entry in table trimTRIfTable. |
| 1.3.6.1.4.1.164.4.3.3.1.1.1 | ColumntrimTRIfIndex | read-only | current | Index to the Token Ring Interface Table. The interface defined by a particular value of this index is the same interface as identified by the same value of ifI… |
| 1.3.6.1.4.1.164.4.3.3.1.1.2 | ColumntrimTREarlyTokenRelease | read-write | current | This parameter controls the early token release. This paramenter is applicable only to 16 Mbps rings. |
| 1.3.6.1.4.1.164.4.3.3.1.1.3 | ColumntrimTRLocalAdminAddress | read-write | current | A locally administered MAC Address of this interface. |
| 1.3.6.1.4.1.164.4.3.3.1.1.4 | ColumntrimTRLocalAdminAddressStatus | read-write | current | This parameter controls whether the bridge uses the locally administered MAC Address defined for this interface, when enable(1), or not , when disable(2). |
| 1.3.6.1.4.1.164.4.3.4 | NodetrimTrapInfo | |||
| 1.3.6.1.4.1.164.4.3.4.1 | ScalartrimErrorDesc | read-only | current | A textual description of the enterprise-specific trap sent to the Network Management Station by Trimbridge. |
| 1.3.6.1.4.1.164.4.3.4.2 | ScalartrimErrorSeverity | read-only | current | The severity type of the enterprise-specific trap sent to the Network Management Station by Trimbridge. |
| 1.3.6.1.4.1.164.4.4 | NodefebFtb | |||
| 1.3.6.1.4.1.164.4.4.0 | IdentityfebFtbEvents | current | The events for FEBs and FTBs. | |
| 1.3.6.1.4.1.164.4.4.0.1 | NotificationlanTableOverflow | current | The station table has the maximum number of addresses for the device. | |
| 1.3.6.1.4.1.164.4.4.0.2 | NotificationstatusChanged | current | A change occured in agent status or leds. | |
| 1.3.6.1.4.1.164.4.4.0.3 | NotificationportFddiStatusChanged | current | The Fddi port status changed. fddimibPORTPCMState value has become off, maint, active, connect, or exited one of these states. | |
| 1.3.6.1.4.1.164.4.4.1 | NodefebFtbTranslation | |||
| 1.3.6.1.4.1.164.4.4.1.1 | TablefebFtbTranslIfTable | not-accessible | current | The translation table defines which type of translation is required for each device interface. This is particularly important for WAN links, as the translating… |
| 1.3.6.1.4.1.164.4.4.1.1.1 | RowfebFtbTranslIfEntry | not-accessible | current | Entry in the translation table. |
| 1.3.6.1.4.1.164.4.4.1.1.1.1 | ColumnfebFtbTranslIfIndex | read-only | current | Index to the Translation Table. The interface defined by a particular value of this index is the same interface as identified by the same value of ifIndex (MIB… |
| 1.3.6.1.4.1.164.4.4.1.1.1.2 | ColumnfebFtbTunnelProtocol | read-write | current | IEEE 802.1h standard defines the tunneling for Appletalk I. This parameter enables the user to specify Ethertype of an additional protocol to tunnel (e.g. IPX)… |
| 1.3.6.1.4.1.164.4.4.1.1.1.3 | ColumnfebFtbTranslIPXRawEthernet | read-write | current | This variable defines the translation mode for IPX frames in standrad Token Ring format. It is applicable to Ethernet interfaces (i.e. febFtbTranslSwitch varia… |
| 1.3.6.1.4.1.164.4.4.2 | NodefebFtbStatus | |||
| 1.3.6.1.4.1.164.4.4.2.1 | TablefebFtbLanTable | not-accessible | current | . |
| 1.3.6.1.4.1.164.4.4.2.1.1 | RowfebFtbLanTabEntry | not-accessible | current | Entry in the LanTab table. |
| 1.3.6.1.4.1.164.4.4.2.1.1.1 | ColumnfebFtbLanTabIfIndex | read-only | current | This variable defines the related interface |
| 1.3.6.1.4.1.164.4.4.2.1.1.2 | ColumnfebFtbLanTabEntNumber | read-only | current | This variable defines the number of entries in the LAN table reletaed to the specific interface |
| 1.3.6.1.4.1.164.4.4.2.2 | ScalarfebFtbFaults | read-only | current | This variable defines the current device faults. It is a 32 bits variable, where each bit represents a unique fault |
| 1.3.6.1.4.1.164.4.5 | Nodemlb | |||
| 1.3.6.1.4.1.164.4.5.0 | IdentitymlbEvents | current | The events for the MLB. | |
| 1.3.6.1.4.1.164.4.5.0.1 | NotificationmlbLanTableOverflow | current | The station table has the maximum number of addresses for the LANRANger. | |
| 1.3.6.1.4.1.164.4.5.0.2 | NotificationmlbStatusChanged | current | The trap indicates changes in the device status . | |
| 1.3.6.1.4.1.164.4.5.1 | NodemlbConfig | |||
| 1.3.6.1.4.1.164.4.5.1.1 | ScalarmlbMibVersion | read-only | current | mlb private mib version . |
| 1.3.6.1.4.1.164.4.5.1.2 | ScalarmlbPanelMedia | read-only | current | The panel media. It can be fiber optic connector or STP+UTP in case of copper |
| 1.3.6.1.4.1.164.4.5.1.3 | ScalarmlbRRFrontPanelPort | read-only | current | Front panel port function : MainPort / Sec.Port (case of RADring card) . |
| 1.3.6.1.4.1.164.4.5.1.4 | ScalarmlbRRTermination | read-only | current | Temination switch - Split back lan and Terminate it. (case of RADring card) . |
| 1.3.6.1.4.1.164.4.5.2 | NodemlbAddress | |||
| 1.3.6.1.4.1.164.4.5.2.1 | TablemlbAddressTable | not-accessible | current | A table that contains information about the MLB ports address . |
| 1.3.6.1.4.1.164.4.5.2.1.1 | RowmlbAddressEntry | not-accessible | current | Information about a specific port that the MLB lists define. |
| 1.3.6.1.4.1.164.4.5.2.1.1.1 | ColumnmlbPortIndex | read-only | current | A unique value for each port, equal to the value of ifIndex for the port. The maximum number of ports for mlb is 2 . |
| 1.3.6.1.4.1.164.4.5.2.1.1.2 | ColumnmlbBurnAddress | read-only | current | This is the burned-in MacAddress on the LANRANger. |
| 1.3.6.1.4.1.164.4.5.2.1.1.3 | ColumnmlbLocAddress | read-write | current | This is a locally administered address. If a zero value appears, the network administrator did not set a locally administered address. |
| 1.3.6.1.4.1.164.4.5.2.1.1.4 | ColumnmlbActiveAddress | read-write | current | The MAC address that is in use on the LANRANger. The address selected will appear in ifPhysAddress. |
| 1.3.6.1.4.1.164.5 | NoderadConverters | |||
| 1.3.6.1.4.1.164.5.1 | NodegenSnar | |||
| 1.3.6.1.4.1.164.5.1.1 | NodesnarState | |||
| 1.3.6.1.4.1.164.5.1.1.1 | ScalarsnarStatus | read-write | current | The status of the whole SNAR process 1 -up 2 -down 3 -test (After setting one of the previous states, the status will be test until the changes will be done). |
| 1.3.6.1.4.1.164.5.1.1.2 | ScalarsnarBufferUsage | read-only | current | The buffer usage of the SNAR (in percentage). |
| 1.3.6.1.4.1.164.5.1.1.3 | ScalarsnarMaxSnaSession | read-only | current | Max number of sessions supported in this SNAR implementation |
| 1.3.6.1.4.1.164.5.1.1.5 | ScalarsnarSaveChanges | read-write | current | N/A to SNAR, only for devices. When changes are made to any configuration parameters (SNA, NVA or others) it should be stored in the device's NVRAM and then th… |
| 1.3.6.1.4.1.164.5.1.3 | NodesnarNva | |||
| 1.3.6.1.4.1.164.5.1.3.2 | ScalarnvaAgentsNumber | read-only | current | The number of configured NetView agents |
| 1.3.6.1.4.1.164.5.1.3.3 | TablenvaAgentTable | not-accessible | current | |
| 1.3.6.1.4.1.164.5.1.3.3.1 | RownvaAgentEntry | not-accessible | current | An entry in table nvaAgentTable. |
| 1.3.6.1.4.1.164.5.1.3.3.1.1 | ColumnnvaAgIndex | read-only | current | Agent number . Range (1 - nvaAgentsNumber) |
| 1.3.6.1.4.1.164.5.1.3.3.1.3 | ColumnnvaAgAdminStatus | read-write | current | The admin. status of NV AGENT. Value of 'disable' will prevent the NetView agent from trying to connect to the NetView management system |
| 1.3.6.1.4.1.164.5.1.3.3.1.4 | ColumnnvaAgOperState | read-only | current | Current Operation state of the NetView agent. Active state means that the NetView agent is in session with the NetView management system |
| 1.3.6.1.4.1.164.5.1.3.3.1.5 | ColumnnvaAgFilter | read-only | current | Alert filter bit mask. Each bit corresponds to a specific alert sent by the NetView agent. |
| 1.3.6.1.4.1.164.5.1.3.3.1.6 | ColumnnvaAgAllowRunCmd | read-write | current | Defines whether the NetView agent is allowed to handle operational commands, received by the RUNCMD facility |
| 1.3.6.1.4.1.164.5.1.3.3.1.7 | ColumnnvaAgAccessType | read-write | current | Defines the method in which the agent tries to connect to the NetView management system(the SNA host) |
| 1.3.6.1.4.1.164.5.1.3.3.1.8 | ColumnnvaAgIfIndex | read-write | current | The port number of the interface in which the NetView agent connects to the SNA host |
| 1.3.6.1.4.1.164.5.1.3.3.1.9 | ColumnnvaAgXidBlockId | read-write | current | The BLOCKID part of the XID information which the NetView agent should use to connect to the NetView management system (The SNA host) |
| 1.3.6.1.4.1.164.5.1.3.3.1.10 | ColumnnvaAgXidBlockNum | read-write | current | The BLOCKNUM part of the XID information which the NetView agent should use to connect to the NetView management system (The SNA host) |
| 1.3.6.1.4.1.164.5.1.3.3.1.11 | ColumnnvaAgSSap | read-write | current | Local SAP, used for the NetView session - for LLC access type session only. |
| 1.3.6.1.4.1.164.5.1.3.3.1.12 | ColumnnvaAgDSap | read-write | current | Remote(host) Sap used by the NetView agent for the SNA host connection - for LLC access session type only. |
| 1.3.6.1.4.1.164.5.1.3.3.1.13 | ColumnnvaAgRemMacAddr | read-write | current | Remote(host) MAC address used by the NetView agent for the SNA host connection - for LLC access session type only. |
| 1.3.6.1.4.1.164.5.1.3.3.1.14 | ColumnnvaAgSdlcAddr | read-write | current | SDLC address used by the NetView agent for the SNA host connection - for SDLC access session type only. |
| 1.3.6.1.4.1.164.5.1.3.3.1.15 | ColumnnvaAgResourceName | read-write | current | A 4 character name that is appended to the resource name in the NetView alerts sent by the NetView agent |
| 1.3.6.1.4.1.164.5.1.3.4 | TablenvaAgentStatTable | not-accessible | current | |
| 1.3.6.1.4.1.164.5.1.3.4.1 | RownvaAgentStatEntry | not-accessible | current | An entry in table nvaAgentStatTable. |
| 1.3.6.1.4.1.164.5.1.3.4.1.1 | ColumnnvaAgStatIndex | read-only | current | Agent number . Range (1 - nvaAgentsNumber) |
| 1.3.6.1.4.1.164.5.1.3.4.1.2 | ColumnnvaAgStatTime | read-write | current | Time since last reset of the NV agent statistics. Setting to a value of 0 will clear all Agents' statistics. |
| 1.3.6.1.4.1.164.5.1.3.4.1.3 | ColumnnvaAgActPu | read-only | current | Number of session initiation (ACTPU) requests received from the SNA host |
| 1.3.6.1.4.1.164.5.1.3.4.1.4 | ColumnnvaAgDactPu | read-only | current | Number of session disconnection (DACTPU) requests received from the SNA host |
| 1.3.6.1.4.1.164.5.1.3.4.1.5 | ColumnnvaAgRpNmvt | read-only | current | Number of NMVTs received from the SNA host, and responded with a positive response. |
| 1.3.6.1.4.1.164.5.1.3.4.1.6 | ColumnnvaAgRnNmvt | read-only | current | Number of NMVTs received from the SNA host, and respond with a negative response. |
| 1.3.6.1.4.1.164.5.1.3.4.1.7 | ColumnnvaAgSpNmvt | read-only | current | Number of NMVTs (of any type) sent to the SNA host. |
| 1.3.6.1.4.1.164.5.1.3.4.1.9 | ColumnnvaAgSAlerts | read-only | current | Number of alert NMVTs sent by the NetView agent. |
| 1.3.6.1.4.1.164.5.1.3.4.1.10 | ColumnnvaAgRRunCmd | read-only | current | Number of RUNCMD (execute-command NMVTs) received by the NetView agent. |
| 1.3.6.1.4.1.164.5.1.3.4.1.11 | ColumnnvaAgSRunCmd | read-only | current | Number of RUNCMD replies sent to the NetView host. |
| 1.3.6.1.4.1.164.5.1.3.4.1.12 | ColumnnvaAgSPdstat | read-only | current | Number of PDSTAT NMVTs sent by the NetView agent. |
| 1.3.6.1.4.1.164.5.1.5 | NodesnarSna | |||
| 1.3.6.1.4.1.164.5.1.5.3 | TablesnaSessTable | not-accessible | current | Holding SNA session's parameters for each side of a specific session, indexed by session_id |
| 1.3.6.1.4.1.164.5.1.5.3.1 | RowsnaSessEntry | not-accessible | current | An entry in table snaSessTable. |
| 1.3.6.1.4.1.164.5.1.5.3.1.1 | ColumnsessIfIndex | read-only | current | Interface used by this SNA session |
| 1.3.6.1.4.1.164.5.1.5.3.1.2 | ColumnsessId | read-only | current | The unique identifier of the converted SNA session id |
| 1.3.6.1.4.1.164.5.1.5.3.1.3 | ColumnsessSide | read-only | current | The SNA session side. Each session handled by SNAR/device, creates 2 SNA sessions, hereafter called 'side A' and 'side B' Configuration parameters, and Statist… |
| 1.3.6.1.4.1.164.5.1.5.3.1.4 | ColumnsessDev | read-only | current | The device number, used in devices setup. N/A to SNAR. |
| 1.3.6.1.4.1.164.5.1.5.3.1.5 | ColumnsessAdminStatus | read-write | current | Admin. status of this session, as requested by the manager. 10 - Session is invalid, and not handled by SNAR devices. 1 - Session is disabled. SNAR/Device will… |
| 1.3.6.1.4.1.164.5.1.5.3.1.6 | ColumnsessOperState | read-only | current | Current operating state. See Manual reference for more information. |
| 1.3.6.1.4.1.164.5.1.5.3.1.7 | ColumnsessAccessType | read-write | current | The access type used by this side of the converted session. |
| 1.3.6.1.4.1.164.5.1.5.3.1.8 | ColumnsessSXidBlockId | read-write | current | The BLOCKID part of the XID information sent by this side for the SNA session initiation |
| 1.3.6.1.4.1.164.5.1.5.3.1.9 | ColumnsessSXidBlockNum | read-write | current | The BLOCKNUM part of the XID information sent by this side for the SNA session initiation |
| 1.3.6.1.4.1.164.5.1.5.3.1.10 | ColumnsessSSap | read-write | current | The Local SAP used by SNAR for this session's side (LLC sessions only) |
| 1.3.6.1.4.1.164.5.1.5.3.1.11 | ColumnsessDSap | read-write | current | The remote SAP used by SNAR for this session's side (LLC sessions only) |
| 1.3.6.1.4.1.164.5.1.5.3.1.12 | ColumnsessRemMacAddr | read-write | current | The remote MAC address used by this session's side (LLC sessions only) |
| 1.3.6.1.4.1.164.5.1.5.3.1.13 | ColumnsessSdlcAddr | read-write | current | The SDLC address used by this session's side (SDLC sessions only, both primary and secondary) |
| 1.3.6.1.4.1.164.5.1.5.3.1.14 | ColumnsessGroupPoll | read-write | current | The address of the group poll in which this session's side participates (SLDC secondary only). A value of 0 indicates that it doesn't participate in any group.… |
| 1.3.6.1.4.1.164.5.1.5.3.1.15 | ColumnsessRole | read-write | current | The type of SDLC session for this side. |
| 1.3.6.1.4.1.164.5.1.5.3.1.16 | ColumnsessIpEncapsulated | read-write | current | Specified whether this session data is encapsulated within UDP/IP |
| 1.3.6.1.4.1.164.5.1.5.3.1.17 | ColumnsessDestIpAddr | read-write | current | The destination IP address (IP encapsulated sessions only). |
| 1.3.6.1.4.1.164.5.1.5.3.1.18 | ColumnsessRemX25Addr | read-write | current | The remote X25 address (QLLC only) . |
| 1.3.6.1.4.1.164.5.1.5.4 | TablesnaSessTuneTable | not-accessible | current | Holding SNA session parameters for each side of a specific session, indexed by session_id |
| 1.3.6.1.4.1.164.5.1.5.4.1 | RowsnaSessTuneEntry | not-accessible | current | An entry in table snaSessTuneTable. |
| 1.3.6.1.4.1.164.5.1.5.4.1.1 | ColumnsessTuneIfIndex | read-only | current | The SNA session side. |
| 1.3.6.1.4.1.164.5.1.5.4.1.2 | ColumnsessTuneId | read-only | current | The unique identifier of the converted SNA session. |
| 1.3.6.1.4.1.164.5.1.5.4.1.3 | ColumnsessTuneSide | read-only | current | The SNA session's side. |
| 1.3.6.1.4.1.164.5.1.5.4.1.4 | ColumnsessBufferSize | read-write | current | The max. buffer size of remote device (All sessions). |
| 1.3.6.1.4.1.164.5.1.5.4.1.5 | ColumnsessSegmentation | read-write | current | Specifies whether the SNAR should perform segmentation when incoming frame on one side is longer then the sessSideBufferSize of the other size 1 - disable - do… |
| 1.3.6.1.4.1.164.5.1.5.4.1.6 | ColumnsessFirstSide | read-only | current | Specifies which side of the two SNA sides (side_a or side_b) should be started first (SNAR only, N/A to devices) |
| 1.3.6.1.4.1.164.5.1.5.4.1.7 | ColumnsessWindow | read-write | current | The max window size (1 .. 127) for this session's side. |
| 1.3.6.1.4.1.164.5.1.5.4.1.8 | ColumnsessDuplex | read-write | current | Specifies the type of SDLC device on the other end of the SDLC line. FULL- means a device capable of transmit and receive data simultaneously. |
| 1.3.6.1.4.1.164.5.1.5.4.1.9 | ColumnsessRXidBlockId | read-write | current | The BLOCKID part of the XID information expected to be received on this side of the SNA session |
| 1.3.6.1.4.1.164.5.1.5.4.1.10 | ColumnsessRXidBlockNum | read-write | current | The BLOCKNUM part of the XID information expected to be received on this side of the SNA session |
| 1.3.6.1.4.1.164.5.1.5.4.1.11 | ColumnsessCheckXid | read-write | current | Specified whether the received XID information should be checked and compared to the value of sessRXid: 1 - disable: don't check 2 - enable : check |
| 1.3.6.1.4.1.164.5.1.5.4.1.12 | ColumnsessT1 | read-write | current | The T1 timer (in 100 msec) for this session's side. |
| 1.3.6.1.4.1.164.5.1.5.4.1.13 | ColumnsessTi | read-write | current | The Ti timer (in sec) for this session |
| 1.3.6.1.4.1.164.5.1.5.4.1.14 | ColumnsessT2 | read-write | current | The T2 timer (in 100 msec) for this session |
| 1.3.6.1.4.1.164.5.1.5.4.1.15 | ColumnsessN2 | read-write | current | The N2 value for this session's side |
| 1.3.6.1.4.1.164.5.1.5.4.1.16 | ColumnsessUdpPort | read-write | current | The UDP port used by SNAR (IP encapsulated sessions only) |
| 1.3.6.1.4.1.164.5.1.5.5 | TablesnaSessStatTable | not-accessible | current | Holding SNA session parameters for each side of a specific session, indexed by session_id |
| 1.3.6.1.4.1.164.5.1.5.5.1 | RowsnaSessStatEntry | not-accessible | current | An entry in table snaSessStatTable. |
| 1.3.6.1.4.1.164.5.1.5.5.1.1 | ColumnsessStatIfIndex | read-only | current | |
| 1.3.6.1.4.1.164.5.1.5.5.1.2 | ColumnsessStatId | read-only | current | The unique identifier of the converted SNA session. |
| 1.3.6.1.4.1.164.5.1.5.5.1.3 | ColumnsessStatSide | read-only | current | The SNA session's side. |
| 1.3.6.1.4.1.164.5.1.5.5.1.4 | ColumnsessStatTime | read-write | current | Time since last reset of this session statistics. Setting to a value of 0 will clear all session statistics. |
| 1.3.6.1.4.1.164.5.1.5.5.1.5 | ColumnsessSPius | read-only | current | The number of PIUs sent by this session's side |
| 1.3.6.1.4.1.164.5.1.5.5.1.6 | ColumnsessSBytes | read-only | current | The number of bytes sent by this session's side. |
| 1.3.6.1.4.1.164.5.1.5.5.1.7 | ColumnsessRPius | read-only | current | The number of PIUs received by this session |
| 1.3.6.1.4.1.164.5.1.5.5.1.8 | ColumnsessRBytes | read-only | current | The number of bytes received by this session's side. |
| 1.3.6.1.4.1.164.5.1.5.5.1.9 | ColumnsessSessFailure | read-only | current | The number of session failures occurs to this session's side. |
| 1.3.6.1.4.1.164.5.1.5.5.1.10 | ColumnsessXidDenieds | read-only | current | The number of XID denied by this session's side |
| 1.3.6.1.4.1.164.5.1.5.7 | TablesnaSessQllcTable | not-accessible | current | Holding SNA session parameters for each side of a specific session, indexed by session_id |
| 1.3.6.1.4.1.164.5.1.5.7.1 | RowsnaSessQllcEntry | not-accessible | current | An entry in table snaSessQllcTable. |
| 1.3.6.1.4.1.164.5.1.5.7.1.1 | ColumnsessQllcIfIndex | read-only | current | |
| 1.3.6.1.4.1.164.5.1.5.7.1.2 | ColumnsessQllcId | read-only | current | The unique identifier of the converted SNA session. |
| 1.3.6.1.4.1.164.5.1.5.7.1.3 | ColumnsessQllcSide | read-only | current | The SNA session's side. |
| 1.3.6.1.4.1.164.5.1.5.7.1.4 | ColumnsessInCalls | read-write | current | N/Allowed to accept call indicators (QLLC only) 1- disable: don't allow to accept call indications 2- enable: Allow to accept call indications |
| 1.3.6.1.4.1.164.5.1.5.7.1.5 | ColumnsessOutCalls | read-write | current | N/Allowed to initiate call requests (QLLC only) 1- disable: don't allow to initiate call requests 2- enable: Allow to initiate call requests |
| 1.3.6.1.4.1.164.5.1.5.7.1.6 | ColumnsessPVC | read-write | current | PVC being used or not (QLLC only) 1 - disable :not use 2 - enable :use |
| 1.3.6.1.4.1.164.5.1.5.7.1.7 | ColumnsessCallReqData | read-write | current | The user's data for call requests (QLLC only). |
| 1.3.6.1.4.1.164.5.1.5.7.1.8 | ColumnsessConnReqFacility | read-write | current | The facilities for connection requests (QLLC only). |
| 1.3.6.1.4.1.164.5.1.5.7.1.9 | ColumnsessGroupId | read-write | current | The facility group id (QLLC only) |
| 1.3.6.1.4.1.164.5.1.5.7.1.10 | ColumnsessDtePswd | read-write | current | The password for local DTE (QLLC only) |
| 1.3.6.1.4.1.164.5.1.5.7.1.11 | ColumnsessDteId | read-write | current | The identification for local DTE (QLLC only). |
| 1.3.6.1.4.1.164.5.1.5.7.1.12 | ColumnsessMaxInPktSize | read-write | current | The max inbound packet size (QLLC only). |
| 1.3.6.1.4.1.164.5.1.5.7.1.13 | ColumnsessMaxOutPktSize | read-write | current | The max outbound packet size (QLLC only). |
| 1.3.6.1.4.1.164.5.1.5.7.1.14 | ColumnsessCallIndReverse | read-write | current | |
| 1.3.6.1.4.1.164.5.2 | NodecvtIfn | |||
| 1.3.6.1.4.1.164.5.2.1 | NodecvtSdlc | |||
| 1.3.6.1.4.1.164.5.2.1.1 | ScalarsdlcLinesNumber | read-only | current | |
| 1.3.6.1.4.1.164.5.2.1.3 | TablesdlcTable | not-accessible | current | |
| 1.3.6.1.4.1.164.5.2.1.3.1 | RowsdlcEntry | not-accessible | current | An entry in table sdlcTable. |
| 1.3.6.1.4.1.164.5.2.1.3.1.1 | ColumnsdlcIfIndex | read-only | current | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has… |
| 1.3.6.1.4.1.164.5.2.1.3.1.2 | ColumnsdlcNrz | read-write | current | |
| 1.3.6.1.4.1.164.5.2.1.3.1.3 | ColumnsdlcDuplex | read-write | current | |
| 1.3.6.1.4.1.164.5.2.1.3.1.4 | ColumnsdlcClockType | read-write | current | |
| 1.3.6.1.4.1.164.5.2.1.3.1.5 | ColumnsdlcSpeed | read-write | current | |
| 1.3.6.1.4.1.164.5.2.1.3.1.6 | ColumnsdlcConnectorType | read-only | current | |
| 1.3.6.1.4.1.164.5.2.1.3.1.7 | ColumnsdlcRts | read-only | current | |
| 1.3.6.1.4.1.164.5.2.1.4 | TablesdlcStatTable | not-accessible | current | |
| 1.3.6.1.4.1.164.5.2.1.4.1 | RowsdlcStatEntry | not-accessible | current | An entry in table sdlcStatTable. |
| 1.3.6.1.4.1.164.5.2.1.4.1.1 | ColumnsdlcStatIfIndex | read-only | current | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has… |
| 1.3.6.1.4.1.164.5.2.1.4.1.2 | ColumnsdlcTimeSinceReset | read-write | current | The time laps since the last reset statistics. Setting the object to 0 will reset all line statistics. |
| 1.3.6.1.4.1.164.5.2.1.4.1.3 | ColumnsdlcStatFramesTrans | read-only | current | |
| 1.3.6.1.4.1.164.5.2.1.4.1.4 | ColumnsdlcStatBytesTrans | read-only | current | |
| 1.3.6.1.4.1.164.5.2.1.4.1.5 | ColumnsdlcStatFramesRcv | read-only | current | |
| 1.3.6.1.4.1.164.5.2.1.4.1.6 | ColumnsdlcStatBytesRcv | read-only | current | |
| 1.3.6.1.4.1.164.5.2.1.4.1.7 | ColumnsdlcStatFramesAbort | read-only | current | |
| 1.3.6.1.4.1.164.5.2.1.4.1.8 | ColumnsdlcStatFramesBad | read-only | current | This counter holds the number of all bad frames. |
| 1.3.6.1.4.1.164.5.2.1.4.1.9 | ColumnsdlcStatFramesCrc | read-only | current | |
| 1.3.6.1.4.1.164.5.2.2 | NodecvtDot5 | |||
| 1.3.6.1.4.1.164.5.2.2.1 | TablecvtDot5Table | not-accessible | current | This table contains Token Ring interface parameters and state variables. One entry per 802.3 interface. |
| 1.3.6.1.4.1.164.5.2.2.1.1 | RowcvtDot5Entry | not-accessible | current | An entry in table cvtDot5Table. |
| 1.3.6.1.4.1.164.5.2.2.1.1.1 | ColumncvtDot5IfIndex | read-only | current | The value of this object identifies the 802.5 interface for which this entry contains management information. The value of this object for a particular interfa… |
| 1.3.6.1.4.1.164.5.2.2.1.1.2 | ColumncvtDot5MacAddr | read-write | current | |
| 1.3.6.1.4.1.164.5.2.2.1.1.3 | ColumncvtDot5Commands | read-write | current | When this object is set to the value of open(2), the station should go into the open state. When this object is set to the value of of reset(3), the station sh… |
| 1.3.6.1.4.1.164.5.2.2.1.1.4 | ColumncvtDot5RingSpeed | read-write | current | The ring's bandwidth. |
| 1.3.6.1.4.1.164.5.2.2.1.1.5 | ColumncvtDot5ActMonParticipate | read-write | current | If this object has a value of true(1) then this interface will participate in the active monitor selection process. If the value is false(2) then it will not. … |
| 1.3.6.1.4.1.164.5.2.2.1.1.6 | ColumncvtDot5Functional | read-write | current | The bit mask of all TR functional addresses for which this interface will accept frames. |
| 1.3.6.1.4.1.164.5.2.3 | NodecvtDot3 | |||
| 1.3.6.1.4.1.164.5.2.3.1 | TablecvtDot3Table | not-accessible | current | This table contains ETHERNET interface parameters and state variables, one entry per 802.3 interface. |
| 1.3.6.1.4.1.164.5.2.3.1.1 | RowcvtDot3Entry | not-accessible | current | An entry in table cvtDot3Table. |
| 1.3.6.1.4.1.164.5.2.3.1.1.1 | ColumncvtDot3IfIndex | read-only | current | The value of this object identifies the 802.3 interface for which this entry contains management information. The value of this object for a particular interfa… |
| 1.3.6.1.4.1.164.5.2.3.1.1.2 | ColumncvtDot3MacAddr | read-write | current | |
| 1.3.6.1.4.1.164.5.2.3.1.1.3 | ColumncvtDot3Commands | read-write | current | When this object is set to the value of open(2), the station should go into the open state. of reset(3), then the station should do a reset. On a reset, all MI… |
| 1.3.6.1.4.1.164.5.2.3.1.1.4 | ColumncvtDot3ActMonParticipate | read-write | current | If this object has a value of true(1) then this interface will participate in the active monitor selection process. If the value is false(2) then it will not. … |
| 1.3.6.1.4.1.164.5.2.3.1.1.5 | ColumncvtDot3Functional | read-write | current | The bit mask of all Ethernet functional addresses for which this interface will accept frames. |
| 1.3.6.1.4.1.164.6 | NoderadGen | |||
| 1.3.6.1.4.1.164.6.1 | Nodesystems | |||
| 1.3.6.1.4.1.164.6.1.0 | IdentitysystemsEvents | current | The events for RAD products. | |
| 1.3.6.1.4.1.164.6.1.0.1 | NotificationtftpStatusChangeTrap | current | This trap is sent whenever the status of tftp changed. | |
| 1.3.6.1.4.1.164.6.1.0.2 | NotificationagnStatusChangeTrap | current | This trap is sent whenever the state of the entity the agent is responsible for changed. TDM devices will send agnTestStatus variable to indicate the current t… | |
| 1.3.6.1.4.1.164.6.1.0.3 | NotificationprtStatusChangeTrap | current | This trap is sent whenever the state of a port changed. Attached, will be parameter/s that indicate the new port status. The attached variables will be specifi… | |
| 1.3.6.1.4.1.164.6.1.0.4 | NotificationswdlStatusResult | current | This notification is sent when Software Down Load is finished. The attached object indicates the File Name. | |
| 1.3.6.1.4.1.164.6.1.0.5 | NotificationintSwdlSlotFileMismatch | current | This notification is sent when the card in the chosen slot doesn't match the chosen file. The attached object indicates the File Name. | |
| 1.3.6.1.4.1.164.6.1.0.6 | NotificationagnCounterChange | current | This notification is sent when the value of a specific Counter is changed. Agent can send as attached object the updated Counter. For details about this Counte… | |
| 1.3.6.1.4.1.164.6.1.0.7 | NotificationprtClkSrcChangeTrap | current | This trap is sent upon any port clock change. | |
| 1.3.6.1.4.1.164.6.1.0.8 | NotificationmoduleFailTrap | current | This trap is sent upon a module failure. | |
| 1.3.6.1.4.1.164.6.1.0.9 | NotificationmoduleInitFailTrap | current | This trap is sent upon a module initialization failure. | |
| 1.3.6.1.4.1.164.6.1.0.10 | NotificationclkSrcChangeTrap | current | This trap is sent upon any change in Clock Source. | |
| 1.3.6.1.4.1.164.6.1.0.11 | NotificationagnUploadDataTrap | current | This trap is sent upon an upload data session termination. For more details see product specification. | |
| 1.3.6.1.4.1.164.6.1.0.12 | NotificationenrollmentTrap | current | This trap is a periodically trap, which sent to manager untill Agent get any response (Get or Set) from this manager. | |
| 1.3.6.1.4.1.164.6.1.0.13 | NotificationagnPowerFailureTrap | current | This trap is sent upon power failure. It is applicable for the following devices: 1. Devices having one PS unit, which sense the failure in advance, and still … | |
| 1.3.6.1.4.1.164.6.1.0.14 | NotificationagnFanFailureTrap | current | This trap is sent upon fan failure/recovery. | |
| 1.3.6.1.4.1.164.6.1.0.15 | NotificationagnSystemParameterChangeTrap | current | This trap is sent upon any change of the systemParameter value. | |
| 1.3.6.1.4.1.164.6.1.0.16 | NotificationagnConfigDBChecksumError | current | This trap indicates that the database currently stored in the non-volatile memory of the device is corrupted | |
| 1.3.6.1.4.1.164.6.1.0.17 | NotificationagnAlarmBufferOverflow | current | This trap indicates that the quantity of alarm messages which have been written in the alarm buffer, since the last clear command, exceeds predefined threshold… | |
| 1.3.6.1.4.1.164.6.1.0.18 | NotificationagnAlarmBufferClear | current | This trap indicates that alarm buffer has been cleared. | |
| 1.3.6.1.4.1.164.6.1.0.19 | NotificationagnParametersValueChanged | current | This trap indicates that due to software upgrade, some of the parameters are assigned new values | |
| 1.3.6.1.4.1.164.6.1.0.20 | NotificationagnDriverSwMismatch | current | There is mismatch between the SW driver and the HW of the device uplink interface. | |
| 1.3.6.1.4.1.164.6.1.0.21 | NotificationagnActualLowRate | current | The main link is synchronized at a rate lower than expected. | |
| 1.3.6.1.4.1.164.6.1.0.22 | NotificationxModemFileTransferStatusTrap | current | This trap is sent in the following cases: - When an xModem File Transfer Session begins. In this case, the trapVal.1 string sent will be: 'Start'. - When an xM… | |
| 1.3.6.1.4.1.164.6.1.0.23 | NotificationagnStationClkFailureTrap | current | This trap is sent upon Station Clock failure. | |
| 1.3.6.1.4.1.164.6.1.0.24 | NotificationsuccessfulLogin | current | This trap is sent when a user performed successful Login via Terminal/Telnet/Web. This trap is used when the device is located at End-User's premises while man… | |
| 1.3.6.1.4.1.164.6.1.0.25 | NotificationfailedLogin | current | This trap is sent when a user tried to Login via Terminal/Telnet/Web and failed. This trap is used when the device is located at End-User's premises while mana… | |
| 1.3.6.1.4.1.164.6.1.0.26 | NotificationmodlChangeTrap | current | This trap is sent whenever a module is inserted or removed. The trap should include the new module type (e.g. modlParamType). | |
| 1.3.6.1.4.1.164.6.1.0.27 | NotificationlicenseUpdateTrap | current | This trap is sent whenever a license is successfully downloaded or whenever a license's demo duration is expired. | |
| 1.3.6.1.4.1.164.6.1.0.28 | NotificationagnClkSrcStateChangeTrap | current | The trap is sent upon change in Recovery Clock State. | |
| 1.3.6.1.4.1.164.6.1.0.29 | NotificationagnSelfTestResultChangeTrap | current | The trap is sent upon each change in the result of a Self State operation. | |
| 1.3.6.1.4.1.164.6.1.0.30 | NotificationagnCurrClkStateChangeTrap | current | The trap is sent upon change in the state of the current (active) clock, when it is a Recovery Clock. | |
| 1.3.6.1.4.1.164.6.1.0.31 | NotificationagnClkSrcFrequencyAlarmTrap | current | The trap is sent upon Recovered Clock Frequency alarm. | |
| 1.3.6.1.4.1.164.6.1.0.32 | NotificationprtLoopDetectTrap | current | This trap is sent upon Loop Detect (On/Off) on a certain port. | |
| 1.3.6.1.4.1.164.6.1.1 | NoderadSysTR | |||
| 1.3.6.1.4.1.164.6.1.1.1 | NoderadRADring | |||
| 1.3.6.1.4.1.164.6.1.1.2 | NoderadTMA | |||
| 1.3.6.1.4.1.164.6.1.1.3 | NoderadRingMonitor | |||
| 1.3.6.1.4.1.164.6.1.2 | NoderadSysFddi | |||
| 1.3.6.1.4.1.164.6.1.2.1 | NoderadFDX100 | |||
| 1.3.6.1.4.1.164.6.1.3 | NoderadSysWan | |||
| 1.3.6.1.4.1.164.6.1.3.0 | IdentityradSysWanEvents | current | The events for RAD Wan products. | |
| 1.3.6.1.4.1.164.6.1.3.0.2 | NotificationimxAlarmTrap | current | The trap is sent every time a new alarm is logged into the alarm buffer. The trap may not be sent more than once in a five second interval. | |
| 1.3.6.1.4.1.164.6.1.3.0.3 | NotificationimxCallLogTrap | current | The trap is sent every time a new call log entry is logged into the log buffer. The trap may not be sent more than once in a five second interval. | |
| 1.3.6.1.4.1.164.6.1.3.0.4 | NotificationimxPingTrap | current | The trap is sent every time a ping operation is performed on a channel. | |
| 1.3.6.1.4.1.164.6.1.3.0.5 | NotificationalarmStatusTrap | current | The trap is sent whenever there is a transition from a no alarm state to a state with at least one active alarm. | |
| 1.3.6.1.4.1.164.6.1.3.0.6 | NotificationsystemTrap | current | This trap alerts of major problems in the device. | |
| 1.3.6.1.4.1.164.6.1.3.0.7 | NotificationalarmLOS | current | This trap indicates Loss Of Signal. | |
| 1.3.6.1.4.1.164.6.1.3.0.8 | NotificationalarmLOF | current | This trap indicates Loss Of Frame. | |
| 1.3.6.1.4.1.164.6.1.3.0.9 | NotificationchannelOperStatusTrap | current | This trap is sent upon any change in one or more channels. | |
| 1.3.6.1.4.1.164.6.1.3.0.10 | NotificationalarmAIS | current | This trap indicates AIS. | |
| 1.3.6.1.4.1.164.6.1.3.0.11 | NotificationalarmRDI | current | This trap indicates RDI. | |
| 1.3.6.1.4.1.164.6.1.3.0.12 | NotificationalarmFEBE | current | This trap indicates FEBE. | |
| 1.3.6.1.4.1.164.6.1.3.0.13 | NotificationlocalConnStatusTrap | current | This trap is sent upon a change in Local connectivity of Bundle connection. | |
| 1.3.6.1.4.1.164.6.1.3.0.14 | NotificationremoteConnStatusTrap | current | This trap is sent upon a change in Remote connectivity of Bundle connection. | |
| 1.3.6.1.4.1.164.6.1.3.0.15 | NotificationbundleConnectionStatusTrap | current | This trap is sent upon any change in the connectivity status of a Bundle (ip2IfOperStatus). The ifAlias index is the ifIndex of the bundle that its status has … | |
| 1.3.6.1.4.1.164.6.1.3.1 | NoderadMP2100 | |||
| 1.3.6.1.4.1.164.6.1.3.2 | NoderadMP2104 | |||
| 1.3.6.1.4.1.164.6.1.3.3 | NoderadMP2100B | |||
| 1.3.6.1.4.1.164.6.1.3.4 | NoderadMP2100F | |||
| 1.3.6.1.4.1.164.6.1.3.5 | NoderadMP2100H | |||
| 1.3.6.1.4.1.164.6.1.3.6 | NoderadMP2104H | |||
| 1.3.6.1.4.1.164.6.1.3.7 | NoderadMP2200B | |||
| 1.3.6.1.4.1.164.6.1.3.8 | NoderadMP2200F | |||
| 1.3.6.1.4.1.164.6.1.3.9 | NoderadMX3000 | |||
| 1.3.6.1.4.1.164.6.1.3.10 | NoderadMX3004 | |||
| 1.3.6.1.4.1.164.6.1.3.11 | NoderadMX30 | |||
| 1.3.6.1.4.1.164.6.1.3.12 | NoderadMX300 | |||
| 1.3.6.1.4.1.164.6.1.3.13 | NoderadVOIP | |||
| 1.3.6.1.4.1.164.6.1.3.15 | NoderadKM2100 | |||
| 1.3.6.1.4.1.164.6.1.3.16 | NoderadKM2104 | |||
| 1.3.6.1.4.1.164.6.1.3.20 | NoderadDXC30 | |||
| 1.3.6.1.4.1.164.6.1.3.21 | NoderadDXC10A | |||
| 1.3.6.1.4.1.164.6.1.3.22 | NoderadDXC8R | |||
| 1.3.6.1.4.1.164.6.1.3.23 | NoderadDXC30E | |||
| 1.3.6.1.4.1.164.6.1.3.24 | NoderadDXC3000 | |||
| 1.3.6.1.4.1.164.6.1.3.25 | NoderadDXC8RNew | |||
| 1.3.6.1.4.1.164.6.1.3.26 | NoderadFcdT1LC | |||
| 1.3.6.1.4.1.164.6.1.3.27 | NoderadFcdE1LC | |||
| 1.3.6.1.4.1.164.6.1.3.28 | NoderadFcdT1L | |||
| 1.3.6.1.4.1.164.6.1.3.29 | NoderadFcdE1L | |||
| 1.3.6.1.4.1.164.6.1.3.30 | NoderadFcdT1 | |||
| 1.3.6.1.4.1.164.6.1.3.31 | NoderadFcdE1 | |||
| 1.3.6.1.4.1.164.6.1.3.32 | NoderadFcdE1I | |||
| 1.3.6.1.4.1.164.6.1.3.33 | NoderadFcdT1M | |||
| 1.3.6.1.4.1.164.6.1.3.34 | NoderadFcdE1M | |||
| 1.3.6.1.4.1.164.6.1.3.35 | NoderadFcdIP | |||
| 1.3.6.1.4.1.164.6.1.3.36 | NoderadFcdT1A | |||
| 1.3.6.1.4.1.164.6.1.3.37 | NoderadFcdE1A | |||
| 1.3.6.1.4.1.164.6.1.3.38 | NoderadFcdW | |||
| 1.3.6.1.4.1.164.6.1.3.39 | NoderadFcdSTM | |||
| 1.3.6.1.4.1.164.6.1.3.40 | NoderadHtuE1Sa | |||
| 1.3.6.1.4.1.164.6.1.3.41 | NoderadHtuE1 | |||
| 1.3.6.1.4.1.164.6.1.3.42 | NoderadHtu2Sa | |||
| 1.3.6.1.4.1.164.6.1.3.43 | NoderadHtu2 | |||
| 1.3.6.1.4.1.164.6.1.3.44 | NoderadAsmi450R768Sa | |||
| 1.3.6.1.4.1.164.6.1.3.45 | NoderadAsmi450R768 | |||
| 1.3.6.1.4.1.164.6.1.3.46 | NoderadAsmi450R1152Sa | |||
| 1.3.6.1.4.1.164.6.1.3.47 | NoderadAsmi450R1152 | |||
| 1.3.6.1.4.1.164.6.1.3.48 | NoderadLrs12F | |||
| 1.3.6.1.4.1.164.6.1.3.49 | NoderadLrs12B | |||
| 1.3.6.1.4.1.164.6.1.3.50 | NoderadLrs52 | |||
| 1.3.6.1.4.1.164.6.1.3.51 | NoderadHcdE1Sa | |||
| 1.3.6.1.4.1.164.6.1.3.52 | NoderadHcdE1 | |||
| 1.3.6.1.4.1.164.6.1.3.53 | NoderadHtuT1Sa | |||
| 1.3.6.1.4.1.164.6.1.3.54 | NoderadHtuT1 | |||
| 1.3.6.1.4.1.164.6.1.3.55 | NoderadOptimux4E1 | |||
| 1.3.6.1.4.1.164.6.1.3.56 | NoderadOptimux4T1 | |||
| 1.3.6.1.4.1.164.6.1.3.57 | NoderadOptimuxXLE1 | |||
| 1.3.6.1.4.1.164.6.1.3.58 | NoderadOptimuxXLT1 | |||
| 1.3.6.1.4.1.164.6.1.3.59 | NoderadOptimuxXL16E1 | |||
| 1.3.6.1.4.1.164.6.1.3.60 | NoderadImx64 | |||
| 1.3.6.1.4.1.164.6.1.3.61 | NoderadImx6L | |||
| 1.3.6.1.4.1.164.6.1.3.62 | NoderadImx2 | |||
| 1.3.6.1.4.1.164.6.1.3.63 | NoderadImx4T1 | |||
| 1.3.6.1.4.1.164.6.1.3.64 | NoderadImx4E1 | |||
| 1.3.6.1.4.1.164.6.1.3.65 | NoderadImx2T1E1 | |||
| 1.3.6.1.4.1.164.6.1.3.66 | NoderadImxi4 | |||
| 1.3.6.1.4.1.164.6.1.3.67 | NoderadOptimux155 | |||
| 1.3.6.1.4.1.164.6.1.3.68 | NoderadOptimux4T1L | |||
| 1.3.6.1.4.1.164.6.1.3.69 | NoderadOptimux4E1L | |||
| 1.3.6.1.4.1.164.6.1.3.70 | NoderadHtuE1SaV2 | |||
| 1.3.6.1.4.1.164.6.1.3.71 | NoderadHtuE1V2 | |||
| 1.3.6.1.4.1.164.6.1.3.72 | NoderadFomiE3 | |||
| 1.3.6.1.4.1.164.6.1.3.73 | NoderadFomiT3 | |||
| 1.3.6.1.4.1.164.6.1.3.74 | NoderadOpt4E1C | |||
| 1.3.6.1.4.1.164.6.1.3.75 | NoderadOpt4T1C | |||
| 1.3.6.1.4.1.164.6.1.3.76 | NoderadPrbiE3 | |||
| 1.3.6.1.4.1.164.6.1.3.77 | NoderadPrbiT3 | |||
| 1.3.6.1.4.1.164.6.1.3.78 | NoderadHcd4Sa | |||
| 1.3.6.1.4.1.164.6.1.3.79 | NoderadOptimuxT3 | |||
| 1.3.6.1.4.1.164.6.1.3.80 | NoderadFRmon | |||
| 1.3.6.1.4.1.164.6.1.3.81 | NoderadIpMux4 | |||
| 1.3.6.1.4.1.164.6.1.3.82 | NoderadIpMux1 | |||
| 1.3.6.1.4.1.164.6.1.3.83 | NoderadIpMux16 | |||
| 1.3.6.1.4.1.164.6.1.3.84 | NoderadIpMux1E | |||
| 1.3.6.1.4.1.164.6.1.3.85 | NoderadVmux2100 | |||
| 1.3.6.1.4.1.164.6.1.3.86 | NoderadMP104 | |||
| 1.3.6.1.4.1.164.6.1.3.87 | NoderadMP204 | |||
| 1.3.6.1.4.1.164.6.1.3.88 | NoderadVmux110 | |||
| 1.3.6.1.4.1.164.6.1.3.90 | NoderadFcd155 | |||
| 1.3.6.1.4.1.164.6.1.3.91 | NoderadIpMux8 | |||
| 1.3.6.1.4.1.164.6.1.3.92 | NoderadOptimux155DS3 | |||
| 1.3.6.1.4.1.164.6.1.3.93 | NoderadOptimuxT3L | |||
| 1.3.6.1.4.1.164.6.1.3.94 | NoderadGmux2000 | |||
| 1.3.6.1.4.1.164.6.1.3.95 | NoderadOp16E1L | |||
| 1.3.6.1.4.1.164.6.1.3.96 | NoderadOp16E1LS | |||
| 1.3.6.1.4.1.164.6.1.3.97 | NoderadPRBm20 | |||
| 1.3.6.1.4.1.164.6.1.3.98 | NoderadPRBm22 | |||
| 1.3.6.1.4.1.164.6.1.3.99 | NoderadAsmi52A | |||
| 1.3.6.1.4.1.164.6.1.3.100 | NoderadOpXLE1 | |||
| 1.3.6.1.4.1.164.6.1.3.101 | NoderadOpXLT1 | |||
| 1.3.6.1.4.1.164.6.1.3.102 | NoderadOpXL16E1 | |||
| 1.3.6.1.4.1.164.6.1.3.103 | NoderadOp4E1 | |||
| 1.3.6.1.4.1.164.6.1.3.104 | NoderadOp4T1 | |||
| 1.3.6.1.4.1.164.6.1.3.105 | NoderadDxc4 | |||
| 1.3.6.1.4.1.164.6.1.3.106 | NoderadIpMux11 | |||
| 1.3.6.1.4.1.164.6.1.3.107 | NoderadIpMux14 | |||
| 1.3.6.1.4.1.164.6.1.3.108 | NoderadOp1550 | |||
| 1.3.6.1.4.1.164.6.1.3.110 | NoderadFdsl101 | |||
| 1.3.6.1.4.1.164.6.1.3.111 | NoderadFdsl201 | |||
| 1.3.6.1.4.1.164.6.1.3.112 | NoderadVmux120 | |||
| 1.3.6.1.4.1.164.6.1.3.113 | NoderadVmux2200 | |||
| 1.3.6.1.4.1.164.6.1.3.114 | NoderadVmux400 | |||
| 1.3.6.1.4.1.164.6.1.3.115 | NoderadIpMux116 | |||
| 1.3.6.1.4.1.164.6.1.3.116 | NoderadOp4E1LNew | |||
| 1.3.6.1.4.1.164.6.1.3.117 | NoderadOp4T1LNew | |||
| 1.3.6.1.4.1.164.6.1.3.118 | NoderadFcd155E | |||
| 1.3.6.1.4.1.164.6.1.3.119 | NoderadFcd155ES | |||
| 1.3.6.1.4.1.164.6.1.3.120 | NoderadMP4100 | |||
| 1.3.6.1.4.1.164.6.1.3.121 | NoderadAsmi52L | |||
| 1.3.6.1.4.1.164.6.1.3.122 | NoderadVmux210 | |||
| 1.3.6.1.4.1.164.6.1.3.123 | NoderadOp34E1 | |||
| 1.3.6.1.4.1.164.6.1.3.124 | NoderadVmux312 | |||
| 1.3.6.1.4.1.164.6.1.3.125 | NoderadVmux404 | |||
| 1.3.6.1.4.1.164.6.1.3.126 | NoderadVmux420 | |||
| 1.3.6.1.4.1.164.6.1.3.127 | NoderadIpMux12 | |||
| 1.3.6.1.4.1.164.6.1.3.128 | NoderadOptimux4E1V3dot5 | |||
| 1.3.6.1.4.1.164.6.1.3.129 | NoderadOptimux4E1Mar06 | |||
| 1.3.6.1.4.1.164.6.1.3.130 | NoderadFcd155EwAPS | |||
| 1.3.6.1.4.1.164.6.1.3.131 | NoderadOptimux4T1Mar06 | |||
| 1.3.6.1.4.1.164.6.1.3.132 | NoderadFcd155EwAPS2pdh | |||
| 1.3.6.1.4.1.164.6.1.3.133 | NoderadVmux320 | |||
| 1.3.6.1.4.1.164.6.1.3.134 | NoderadMP2100VoIP | |||
| 1.3.6.1.4.1.164.6.1.3.135 | NoderadMP2104VoIP | |||
| 1.3.6.1.4.1.164.6.1.3.136 | NoderadIpMux24 | |||
| 1.3.6.1.4.1.164.6.1.3.137 | NoderadOp4E1NG1 | |||
| 1.3.6.1.4.1.164.6.1.3.138 | NoderadOp4T1NG1 | |||
| 1.3.6.1.4.1.164.6.1.3.139 | NoderadOp25 | |||
| 1.3.6.1.4.1.164.6.1.3.140 | NoderadAsmi54 | |||
| 1.3.6.1.4.1.164.6.1.3.141 | NoderadVmux314 | |||
| 1.3.6.1.4.1.164.6.1.3.142 | NoderadFcd622 | |||
| 1.3.6.1.4.1.164.6.1.3.143 | NoderadLrs22 | |||
| 1.3.6.1.4.1.164.6.1.3.144 | NoderadUNT20E1 | |||
| 1.3.6.1.4.1.164.6.1.3.145 | NoderadIpMux2L | |||
| 1.3.6.1.4.1.164.6.1.3.146 | NoderadFcdE1E | |||
| 1.3.6.1.4.1.164.6.1.3.147 | NoderadIpMux216 | |||
| 1.3.6.1.4.1.164.6.1.3.148 | NoderadLrs102 | |||
| 1.3.6.1.4.1.164.6.1.3.149 | NoderadGmux2004 | |||
| 1.3.6.1.4.1.164.6.1.3.150 | NoderadLrs102unbal | |||
| 1.3.6.1.4.1.164.6.1.3.151 | NoderadLrs16 | |||
| 1.3.6.1.4.1.164.6.1.3.152 | NoderadVmux405 | |||
| 1.3.6.1.4.1.164.6.1.3.153 | NoderadVmux425 | |||
| 1.3.6.1.4.1.164.6.1.3.154 | NoderadMiniCVS | |||
| 1.3.6.1.4.1.164.6.1.3.155 | NoderadIpMux155 | |||
| 1.3.6.1.4.1.164.6.1.4 | NoderadSysBRG | |||
| 1.3.6.1.4.1.164.6.1.4.1 | NoderadTRE1 | |||
| 1.3.6.1.4.1.164.6.1.4.2 | NoderadTRE1D | |||
| 1.3.6.1.4.1.164.6.1.4.3 | NoderadTRE8 | |||
| 1.3.6.1.4.1.164.6.1.4.4 | NoderadTRE8D | |||
| 1.3.6.1.4.1.164.6.1.4.5 | NoderadMBE1 | |||
| 1.3.6.1.4.1.164.6.1.4.6 | NoderadMBE1D | |||
| 1.3.6.1.4.1.164.6.1.4.7 | NoderadMBE8 | |||
| 1.3.6.1.4.1.164.6.1.4.8 | NoderadMBE8D | |||
| 1.3.6.1.4.1.164.6.1.4.9 | NoderadMLBT | |||
| 1.3.6.1.4.1.164.6.1.4.10 | NoderadFEB4DAS | |||
| 1.3.6.1.4.1.164.6.1.4.11 | NoderadTrimBrg10 | |||
| 1.3.6.1.4.1.164.6.1.4.12 | NoderadTrimBrg16 | |||
| 1.3.6.1.4.1.164.6.1.4.13 | NoderadRRTRE8 | |||
| 1.3.6.1.4.1.164.6.1.4.14 | NoderadRRTRE8D | |||
| 1.3.6.1.4.1.164.6.1.4.15 | NoderadRRMLBT | |||
| 1.3.6.1.4.1.164.6.1.4.16 | NoderadRRMLBTF | |||
| 1.3.6.1.4.1.164.6.1.4.17 | NoderadRRTRE1D | |||
| 1.3.6.1.4.1.164.6.1.4.18 | NoderadTRERAS | |||
| 1.3.6.1.4.1.164.6.1.4.19 | NoderadTRERASa | |||
| 1.3.6.1.4.1.164.6.1.4.20 | NoderadMBERAS | |||
| 1.3.6.1.4.1.164.6.1.4.21 | NoderadMBERASa | |||
| 1.3.6.1.4.1.164.6.1.4.22 | NoderadFEB4FDX | |||
| 1.3.6.1.4.1.164.6.1.4.23 | NoderadFEB4SAS | |||
| 1.3.6.1.4.1.164.6.1.4.24 | NoderadRRFTBDAS | |||
| 1.3.6.1.4.1.164.6.1.4.25 | NoderadRRFTBSAS | |||
| 1.3.6.1.4.1.164.6.1.4.26 | NoderadFTBDAS | |||
| 1.3.6.1.4.1.164.6.1.4.27 | NoderadFTBSAS | |||
| 1.3.6.1.4.1.164.6.1.4.28 | NoderadFastWay100 | |||
| 1.3.6.1.4.1.164.6.1.5 | NoderadSysCnvrtr | |||
| 1.3.6.1.4.1.164.6.1.5.1 | NoderadSTC1 | |||
| 1.3.6.1.4.1.164.6.1.5.3 | NoderadSTC2 | |||
| 1.3.6.1.4.1.164.6.1.5.4 | NoderadSTC1UDP | |||
| 1.3.6.1.4.1.164.6.1.5.6 | NoderadSTC2UDP | |||
| 1.3.6.1.4.1.164.6.1.5.10 | NoderadFTC1 | |||
| 1.3.6.1.4.1.164.6.1.5.12 | NoderadFTC2 | |||
| 1.3.6.1.4.1.164.6.1.5.13 | NoderadFTC1UDP | |||
| 1.3.6.1.4.1.164.6.1.5.15 | NoderadFTC2UDP | |||
| 1.3.6.1.4.1.164.6.1.5.20 | NoderadSEC1 | |||
| 1.3.6.1.4.1.164.6.1.5.22 | NoderadSEC2 | |||
| 1.3.6.1.4.1.164.6.1.5.23 | NoderadSEC1UDP | |||
| 1.3.6.1.4.1.164.6.1.5.25 | NoderadSEC2UDP | |||
| 1.3.6.1.4.1.164.6.1.5.30 | NoderadFEC1 | |||
| 1.3.6.1.4.1.164.6.1.5.32 | NoderadFEC2 | |||
| 1.3.6.1.4.1.164.6.1.5.33 | NoderadFEC1UDP | |||
| 1.3.6.1.4.1.164.6.1.5.35 | NoderadFEC2UDP | |||
| 1.3.6.1.4.1.164.6.1.5.36 | NoderadRIC155 | |||
| 1.3.6.1.4.1.164.6.1.5.37 | NoderadRICE1 | |||
| 1.3.6.1.4.1.164.6.1.5.38 | NoderadETX102 | |||
| 1.3.6.1.4.1.164.6.1.5.39 | NoderadRIC155GE | |||
| 1.3.6.1.4.1.164.6.1.5.40 | NoderadRiciT3 | |||
| 1.3.6.1.4.1.164.6.1.5.41 | NoderadRiciE3 | |||
| 1.3.6.1.4.1.164.6.1.5.42 | NoderadRiciT1 | |||
| 1.3.6.1.4.1.164.6.1.5.43 | NoderadETX202 | |||
| 1.3.6.1.4.1.164.6.1.5.44 | NoderadETX105 | |||
| 1.3.6.1.4.1.164.6.1.5.45 | NoderadETX205 | |||
| 1.3.6.1.4.1.164.6.1.5.46 | NoderadRiciSE | |||
| 1.3.6.1.4.1.164.6.1.5.47 | NoderadRIC622GE | |||
| 1.3.6.1.4.1.164.6.1.5.48 | NoderadSPH | |||
| 1.3.6.1.4.1.164.6.1.5.49 | NoderadMiricE1T1 | |||
| 1.3.6.1.4.1.164.6.1.5.50 | NoderadMiricE3T3 | |||
| 1.3.6.1.4.1.164.6.1.5.51 | NoderadSPH4 | |||
| 1.3.6.1.4.1.164.6.1.6 | NoderadEthAccess | |||
| 1.3.6.1.4.1.164.6.1.6.1 | NoderadETX510 | |||
| 1.3.6.1.4.1.164.6.1.6.2 | NoderadEGate100 | |||
| 1.3.6.1.4.1.164.6.1.6.3 | NoderadEGate20 | |||
| 1.3.6.1.4.1.164.6.1.6.4 | NoderadRici8E1 | |||
| 1.3.6.1.4.1.164.6.1.6.5 | NoderadRici8T1 | |||
| 1.3.6.1.4.1.164.6.1.6.6 | NoderadRici4E1 | |||
| 1.3.6.1.4.1.164.6.1.6.7 | NoderadRici4T1 | |||
| 1.3.6.1.4.1.164.6.1.6.8 | NoderadIMXI4 | |||
| 1.3.6.1.4.1.164.6.1.6.9 | NoderadETX550 | |||
| 1.3.6.1.4.1.164.6.1.6.10 | NoderadRici16 | |||
| 1.3.6.1.4.1.164.6.1.6.11 | NoderadETX102A | |||
| 1.3.6.1.4.1.164.6.1.6.12 | NoderadETX202A | |||
| 1.3.6.1.4.1.164.6.1.6.13 | NoderadETX201A | |||
| 1.3.6.1.4.1.164.6.1.6.14 | NoderadETX201 | |||
| 1.3.6.1.4.1.164.6.1.6.15 | NoderadUNT20Ric | |||
| 1.3.6.1.4.1.164.6.1.6.16 | NoderadRici4E1L | |||
| 1.3.6.1.4.1.164.6.1.6.17 | NoderadRici8E1L | |||
| 1.3.6.1.4.1.164.6.1.6.18 | NoderadRici155GE | |||
| 1.3.6.1.4.1.164.6.1.6.19 | NoderadRici622GE | |||
| 1.3.6.1.4.1.164.6.1.6.20 | NoderadETX208 | |||
| 1.3.6.1.4.1.164.6.1.6.21 | NoderadETX202AW | |||
| 1.3.6.1.4.1.164.6.1.6.22 | NoderadETX102H | |||
| 1.3.6.1.4.1.164.6.1.6.23 | NoderadETX202H | |||
| 1.3.6.1.4.1.164.6.1.7 | NoderadSysStkHub | |||
| 1.3.6.1.4.1.164.6.1.7.1 | NoderadRBHE | |||
| 1.3.6.1.4.1.164.6.1.7.1.0 | IdentityradRBHEEvents | current | The events for RAD Stackable products. | |
| 1.3.6.1.4.1.164.6.1.7.1.0.10 | NotificationresetRequired | current | This trap indicates that in order to perform the last SET request, a reset operation of the router/bridge is required. This occurs when the layer 2 routing alg… | |
| 1.3.6.1.4.1.164.6.1.7.1.0.20 | NotificationcompNotActive | current | Compression was enabled but cannot be activated, since connected device does not support correct compression. | |
| 1.3.6.1.4.1.164.6.1.7.1.0.21 | NotificationnoCompression | current | Compression card not present. | |
| 1.3.6.1.4.1.164.6.1.7.1.0.22 | NotificationerrorBackUp | current | Automatic switchover to backup link because of excessive link errors. | |
| 1.3.6.1.4.1.164.6.1.7.1.0.23 | NotificationfaultBackUp | current | Automatic switchover to backup link because of main link fault. | |
| 1.3.6.1.4.1.164.6.1.7.1.0.24 | NotificationmainLinkUp | current | Communication returned to main link. | |
| 1.3.6.1.4.1.164.6.1.7.1.0.25 | NotificationfailedDialUp | current | Cannot establish backup dial-up connection. | |
| 1.3.6.1.4.1.164.6.1.7.1.0.29 | NotificationextLoopBack | current | This trap is sent when Loopback starts on the link. | |
| 1.3.6.1.4.1.164.6.1.7.1.0.41 | NotificationdialUpConnFailed | current | This trap is sent when the dialUp connection is terminated due to a failure. | |
| 1.3.6.1.4.1.164.6.1.7.1.0.42 | NotificationdialUpConnEstablished | current | This trap is sent when the dialUp connection is established. | |
| 1.3.6.1.4.1.164.6.1.7.2 | NoderadRBHT | |||
| 1.3.6.1.4.1.164.6.1.7.2.0 | IdentityradRBHTEvents | current | The events for RAD Stackable products. | |
| 1.3.6.1.4.1.164.6.1.7.2.0.30 | NotificationringBeaconing | current | This trap is sent when Token Ring LAN is beaconing. | |
| 1.3.6.1.4.1.164.6.1.7.2.0.31 | NotificationlanAdapterRemoved | current | This trap is sent when Token Ring LAN adapter was removed by LAN manager. | |
| 1.3.6.1.4.1.164.6.1.7.2.0.43 | NotificationdialUpConnTerminated | current | This trap is sent when the dialUp connection is normally terminated. | |
| 1.3.6.1.4.1.164.6.1.7.3 | NoderadETS4fddiDAS | |||
| 1.3.6.1.4.1.164.6.1.7.4 | NoderadETS4fddiSAS | |||
| 1.3.6.1.4.1.164.6.1.7.5 | NoderadSAHEMX | |||
| 1.3.6.1.4.1.164.6.1.7.6 | NoderadSAHTM | |||
| 1.3.6.1.4.1.164.6.1.7.7 | NoderadETS4 | |||
| 1.3.6.1.4.1.164.6.1.7.8 | NoderadSAHEMU | |||
| 1.3.6.1.4.1.164.6.1.7.9 | Nodeunknown | |||
| 1.3.6.1.4.1.164.6.1.7.10 | NoderadSAH16Eint | |||
| 1.3.6.1.4.1.164.6.1.7.11 | NoderadSAH16Tint | |||
| 1.3.6.1.4.1.164.6.1.7.12 | NoderadSAH16Eext | |||
| 1.3.6.1.4.1.164.6.1.7.13 | NoderadSAH16Text | |||
| 1.3.6.1.4.1.164.6.1.8 | NoderadSysPS | |||
| 1.3.6.1.4.1.164.6.1.8.0 | IdentityradSysPSEvents | current | The events for RAD Packet Switch (PS) products. | |
| 1.3.6.1.4.1.164.6.1.8.0.1 | NotificationlinkProtocolChanged | current | Upon setting of a new protocol to a specific interface. | |
| 1.3.6.1.4.1.164.6.1.8.0.2 | NotificationenrollmentPS | current | Periodic trap to be sent to the list of managers. | |
| 1.3.6.1.4.1.164.6.1.8.0.3 | NotificationrtsChange | current | ||
| 1.3.6.1.4.1.164.6.1.8.0.4 | NotificationledStatusChange | current | The trap is sent when one of the Hazard LEDs has changed. | |
| 1.3.6.1.4.1.164.6.1.8.1 | NoderadSPS2 | |||
| 1.3.6.1.4.1.164.6.1.8.2 | NoderadSPS3 | |||
| 1.3.6.1.4.1.164.6.1.8.3 | NoderadSPS6 | |||
| 1.3.6.1.4.1.164.6.1.8.4 | NoderadSPS9 | |||
| 1.3.6.1.4.1.164.6.1.8.5 | NoderadSPS12 | |||
| 1.3.6.1.4.1.164.6.1.8.6 | NoderadAPD2 | |||
| 1.3.6.1.4.1.164.6.1.8.7 | NoderadAPD8 | |||
| 1.3.6.1.4.1.164.6.1.8.8 | NoderadAPS8 | |||
| 1.3.6.1.4.1.164.6.1.8.9 | NoderadAPS16 | |||
| 1.3.6.1.4.1.164.6.1.8.10 | NoderadAPS24 | |||
| 1.3.6.1.4.1.164.6.1.8.11 | NoderadSPS3S | |||
| 1.3.6.1.4.1.164.6.1.8.12 | NoderadFPS8 | |||
| 1.3.6.1.4.1.164.6.1.8.13 | NoderadFPS12 | |||
| 1.3.6.1.4.1.164.6.1.8.14 | NoderadSPS3ScSL | |||
| 1.3.6.1.4.1.164.6.1.8.15 | NoderadSPS3Sc2S | |||
| 1.3.6.1.4.1.164.6.1.8.16 | NoderadFPS8c | |||
| 1.3.6.1.4.1.164.6.1.8.17 | NoderadFPS4 | |||
| 1.3.6.1.4.1.164.6.1.8.18 | NoderadSPS4 | |||
| 1.3.6.1.4.1.164.6.1.9 | NoderadSysEth | |||
| 1.3.6.1.4.1.164.6.1.9.1 | NoderadEP8T | |||
| 1.3.6.1.4.1.164.6.1.9.2 | NoderadEP4TAUI | |||
| 1.3.6.1.4.1.164.6.1.9.3 | NoderadEP4T2FL | |||
| 1.3.6.1.4.1.164.6.1.9.4 | NoderadEP4TFL | |||
| 1.3.6.1.4.1.164.6.1.9.5 | NoderadEP4FL | |||
| 1.3.6.1.4.1.164.6.1.9.7 | NoderadEPR8T | |||
| 1.3.6.1.4.1.164.6.1.9.8 | NoderadEPR4TAUI | |||
| 1.3.6.1.4.1.164.6.1.9.9 | NoderadEPR4T2FL | |||
| 1.3.6.1.4.1.164.6.1.9.10 | NoderadEPR4TFL | |||
| 1.3.6.1.4.1.164.6.1.9.11 | NoderadEPR4FL | |||
| 1.3.6.1.4.1.164.6.1.11 | NoderadSysRtr | |||
| 1.3.6.1.4.1.164.6.1.11.0 | IdentityradSysRtrEvents | current | The events for RAD Router products. | |
| 1.3.6.1.4.1.164.6.1.11.0.1 | NotificationrtrFACSViolation | current | The trap is sent for every violation of a FACS filter. | |
| 1.3.6.1.4.1.164.6.1.11.0.2 | NotificationrtrSwDwnLoadTrap | current | The trap is sent after the tftp download of the software and before the decompression and reset operations. | |
| 1.3.6.1.4.1.164.6.1.11.1 | NoderadRTED | |||
| 1.3.6.1.4.1.164.6.1.11.2 | NoderadRTEM | |||
| 1.3.6.1.4.1.164.6.1.11.3 | NoderadRTEC | |||
| 1.3.6.1.4.1.164.6.1.11.4 | NoderadWebRanger | |||
| 1.3.6.1.4.1.164.6.1.11.5 | NoderadTinyRouter | |||
| 1.3.6.1.4.1.164.6.1.11.6 | NoderadLA240 | |||
| 1.3.6.1.4.1.164.6.1.11.7 | NoderadSuperLan | |||
| 1.3.6.1.4.1.164.6.1.11.8 | NoderadLA240I | |||
| 1.3.6.1.4.1.164.6.1.11.9 | NoderadFcdIsdn | |||
| 1.3.6.1.4.1.164.6.1.11.10 | NoderadEFcdIp | |||
| 1.3.6.1.4.1.164.6.1.11.11 | NoderadFcdIpD | |||
| 1.3.6.1.4.1.164.6.1.11.12 | NoderadFcdIpM | |||
| 1.3.6.1.4.1.164.6.1.11.13 | NoderadFcdIpL | |||
| 1.3.6.1.4.1.164.6.1.12 | NoderadSysAtm | |||
| 1.3.6.1.4.1.164.6.1.12.0 | IdentityradSysAtmEvents | current | The events for RAD ATM products. | |
| 1.3.6.1.4.1.164.6.1.12.0.6 | NotificationatmAceSystemTrap | current | This trap alerts of major problems in the device. | |
| 1.3.6.1.4.1.164.6.1.12.0.7 | NotificationatmAceAlarmForwardingTrap | current | This trap is sent upon starting or stopping Alarm Forwarding Mechanism. | |
| 1.3.6.1.4.1.164.6.1.12.0.8 | NotificationatmAceDateAndTimeRequest | current | This trap is sent upon restart. Upon recieving this trap the NMS will set the device's date and time. This trap's purpose is to fix a problem in ACE2002, ACE-2… | |
| 1.3.6.1.4.1.164.6.1.12.0.16 | NotificationatmAceAlarmLOS | current | This trap indicates Loss Of Signal. | |
| 1.3.6.1.4.1.164.6.1.12.0.17 | NotificationatmAceAlarmLOF | current | This trap indicates Loss Of Frame. | |
| 1.3.6.1.4.1.164.6.1.12.0.18 | NotificationatmAceAlarmLCD | current | This trap indicates Loss of Cell Delineation. | |
| 1.3.6.1.4.1.164.6.1.12.0.19 | NotificationatmAceAlarmSLM | current | This trap indicates Signal Line Mismatch. | |
| 1.3.6.1.4.1.164.6.1.12.0.20 | NotificationatmAceAlarmLOP | current | This trap indicates Loss of Pointer. | |
| 1.3.6.1.4.1.164.6.1.12.0.21 | NotificationatmAceAlarmLineAIS | current | This trap indicates Line AIS. | |
| 1.3.6.1.4.1.164.6.1.12.0.22 | NotificationatmAceAlarmPathAIS | current | This trap indicates Path AIS. | |
| 1.3.6.1.4.1.164.6.1.12.0.23 | NotificationatmAceAlarmLineRDI | current | This trap indicates Line RDI. | |
| 1.3.6.1.4.1.164.6.1.12.0.24 | NotificationatmAceAlarmPathRDI | current | This trap indicates Path RDIand Path RAI(Yellow) for DS1 interfaces. | |
| 1.3.6.1.4.1.164.6.1.12.0.25 | NotificationatmAceAlarmSectionBIP | current | This trap indicates Section Bit Interleave Parity. | |
| 1.3.6.1.4.1.164.6.1.12.0.26 | NotificationatmAceAlarmLineBIP | current | This trap indicates Line Bit Interleave Parity. | |
| 1.3.6.1.4.1.164.6.1.12.0.27 | NotificationatmAceAlarmPathBIP | current | This trap indicates Path Bit Interleave Parity. | |
| 1.3.6.1.4.1.164.6.1.12.0.28 | NotificationatmAceAlarmLineFEBE | current | This trap indicates Line Far End Block Error. | |
| 1.3.6.1.4.1.164.6.1.12.0.29 | NotificationatmAceAlarmPathFEBE | current | This trap indicates Path Far End Block Error. | |
| 1.3.6.1.4.1.164.6.1.12.0.30 | NotificationatmAceAlarmPlcpLOF | current | This trap indicates T3 PLCP Loss Of Frame. | |
| 1.3.6.1.4.1.164.6.1.12.0.31 | NotificationatmAceAlarmPlcpYELLOW | current | This trap indicates T3 Plcp Yellow. | |
| 1.3.6.1.4.1.164.6.1.12.0.32 | NotificationatmAceAlarmPlcpBIP | current | This trap indicates T3 Plcp Bit Interleave Parity. | |
| 1.3.6.1.4.1.164.6.1.12.0.33 | NotificationatmAceAlarmPlcpFEBE | current | This trap indicates T3 Plcp Far End Block Error. | |
| 1.3.6.1.4.1.164.6.1.12.0.34 | NotificationatmAceAlarmPlcpP1P2 | current | This trap indicates T3 Plcp Parity errors in P1/P2 bytes. | |
| 1.3.6.1.4.1.164.6.1.12.0.35 | NotificationatmAceAlarmUAS | current | This trap is sent upon UAS start or end per port. | |
| 1.3.6.1.4.1.164.6.1.12.0.36 | NotificationatmAceAlarmCluster | current | This trap is sent upon atmNteAlarmType start or end, for a cluster of VPs/VCs (according to atmNteLevel) with the same alarm on the same physical port. This tr… | |
| 1.3.6.1.4.1.164.6.1.12.0.37 | NotificationatmAceHwFailure | current | This trap is sent upon HW failure per port. | |
| 1.3.6.1.4.1.164.6.1.12.0.38 | NotificationatmAceUnavailableBwTrap | current | This trap is sent when Bandwidth allocation is > max possible value for the installed card. For ACE2002 this trap will be sent for the following cases: Card in… | |
| 1.3.6.1.4.1.164.6.1.12.0.40 | NotificationatmAceAlarmVpContinuityLoss | current | This trap indicates Loss of Continuity Check on a VP Connection. | |
| 1.3.6.1.4.1.164.6.1.12.0.41 | NotificationatmAceAlarmVpAISReception | current | This trap indicates AIS Reception on a VP Connection. | |
| 1.3.6.1.4.1.164.6.1.12.0.42 | NotificationatmAceAlarmVpRDIReception | current | This trap indicates RDI Reception on a VP Connection. | |
| 1.3.6.1.4.1.164.6.1.12.0.43 | NotificationatmAceAlarmVpErroredCells | current | This trap indicates Errored Cells on a VP Connection reported by PM. | |
| 1.3.6.1.4.1.164.6.1.12.0.44 | NotificationatmAceAlarmVpLostCells | current | This trap indicates Lost Cells on a VP Connection reported by PM. | |
| 1.3.6.1.4.1.164.6.1.12.0.45 | NotificationatmAceAlarmVpMisinsertedCells | current | This trap indicates Misinserted Cells on a VP Connection reported by PM. | |
| 1.3.6.1.4.1.164.6.1.12.0.46 | NotificationatmAceAlarmVpUAS | current | This trap is sent upon UAS start or end per VP. | |
| 1.3.6.1.4.1.164.6.1.12.0.47 | NotificationatmAceAlarmVpLoopback | current | This trap is sent upon OAM LoopBack fail status per VP. | |
| 1.3.6.1.4.1.164.6.1.12.0.48 | NotificationatmAceAlarmVpGCRAViolation | current | This trap indicates GCRA violation on a VP Connection reported by UPC device. | |
| 1.3.6.1.4.1.164.6.1.12.0.56 | NotificationatmAceAlarmVcContinuityLoss | current | This trap indicates Loss of Continuity Check on a VC Connection. | |
| 1.3.6.1.4.1.164.6.1.12.0.57 | NotificationatmAceAlarmVcAISReception | current | This trap indicates AIS Reception on a VC. | |
| 1.3.6.1.4.1.164.6.1.12.0.58 | NotificationatmAceAlarmVcRDIReception | current | This trap indicates RDI Reception on a VC Connection. | |
| 1.3.6.1.4.1.164.6.1.12.0.59 | NotificationatmAceAlarmVcErroredCells | current | This trap indicates Errored Cells on a VC Connection reported by PM. | |
| 1.3.6.1.4.1.164.6.1.12.0.60 | NotificationatmAceAlarmVcLostCells | current | This trap indicates Lost Cells on a VC Connection reported by PM. | |
| 1.3.6.1.4.1.164.6.1.12.0.61 | NotificationatmAceAlarmVcMisinsertedCells | current | This trap indicates Misinserted Cells on a VC Connection reported by PM. | |
| 1.3.6.1.4.1.164.6.1.12.0.62 | NotificationatmAceAlarmVcUnexpectedCell | current | This trap indicates an unexpected cell from user or network port. | |
| 1.3.6.1.4.1.164.6.1.12.0.63 | NotificationatmAceAlarmVcUAS | current | This trap is sent upon UAS start or end per VC. | |
| 1.3.6.1.4.1.164.6.1.12.0.64 | NotificationatmAceAlarmVcLoopback | current | This trap is sent upon OAM LoopBack fail status per VC. | |
| 1.3.6.1.4.1.164.6.1.12.0.65 | NotificationatmAceAlarmVcGCRAViolation | current | This trap indicates GCRA violation on a VC Connection reported by UPC device. | |
| 1.3.6.1.4.1.164.6.1.12.0.80 | NotificationatmImaGroupStatusChangeTrap | current | This trap indicates IMA Group status change. | |
| 1.3.6.1.4.1.164.6.1.12.1 | NoderadStarSwitch | |||
| 1.3.6.1.4.1.164.6.1.12.1.1 | NoderadStarSwitchATM25 | |||
| 1.3.6.1.4.1.164.6.1.12.1.2 | NoderadStarSwitchATM25L | |||
| 1.3.6.1.4.1.164.6.1.12.1.3 | NoderadStarSwitchATM155 | |||
| 1.3.6.1.4.1.164.6.1.12.2 | NoderadAtmCsuDsu | |||
| 1.3.6.1.4.1.164.6.1.12.2.1 | NoderadAmcdE1 | |||
| 1.3.6.1.4.1.164.6.1.12.2.2 | NoderadAmcdT1 | |||
| 1.3.6.1.4.1.164.6.1.12.2.3 | NoderadAce20E | |||
| 1.3.6.1.4.1.164.6.1.12.2.4 | NoderadAce20T | |||
| 1.3.6.1.4.1.164.6.1.12.2.5 | NoderadAce2005 | |||
| 1.3.6.1.4.1.164.6.1.12.2.6 | NoderadAce2002 | |||
| 1.3.6.1.4.1.164.6.1.12.2.7 | NoderadAce2002E | |||
| 1.3.6.1.4.1.164.6.1.12.2.8 | NoderadAce2E | |||
| 1.3.6.1.4.1.164.6.1.12.2.9 | NoderadAce2T | |||
| 1.3.6.1.4.1.164.6.1.12.2.10 | NoderadMlAtmE1 | |||
| 1.3.6.1.4.1.164.6.1.12.2.11 | NoderadMlAtmT1 | |||
| 1.3.6.1.4.1.164.6.1.12.2.12 | NoderadAmc102 | |||
| 1.3.6.1.4.1.164.6.1.12.2.13 | NoderadAmc102c | |||
| 1.3.6.1.4.1.164.6.1.12.2.14 | NoderadAce202 | |||
| 1.3.6.1.4.1.164.6.1.12.3 | NoderadAce | |||
| 1.3.6.1.4.1.164.6.1.12.3.1 | NoderadAce101 | |||
| 1.3.6.1.4.1.164.6.1.12.3.2 | NoderadAce102 | |||
| 1.3.6.1.4.1.164.6.1.12.3.3 | NoderadAce50 | |||
| 1.3.6.1.4.1.164.6.1.12.3.4 | NoderadAce52 | |||
| 1.3.6.1.4.1.164.6.1.12.3.5 | NoderadAce52L | |||
| 1.3.6.1.4.1.164.6.1.12.3.7 | NoderadAce201 | |||
| 1.3.6.1.4.1.164.6.1.12.3.8 | NoderadAce3200 | |||
| 1.3.6.1.4.1.164.6.1.12.3.9 | NoderadAce3100 | |||
| 1.3.6.1.4.1.164.6.1.12.3.10 | NoderadAce3400 | |||
| 1.3.6.1.4.1.164.6.1.12.3.11 | NoderadAce3402 | |||
| 1.3.6.1.4.1.164.6.1.12.3.12 | NoderadAce3100PSN | |||
| 1.3.6.1.4.1.164.6.1.12.3.13 | NoderadAce3200PSN | |||
| 1.3.6.1.4.1.164.6.1.12.3.14 | NoderadAce3400PSN | |||
| 1.3.6.1.4.1.164.6.1.12.3.15 | NoderadAce3402PSN | |||
| 1.3.6.1.4.1.164.6.1.12.3.16 | NoderadAce3600 | |||
| 1.3.6.1.4.1.164.6.1.12.3.17 | NoderadAce3205 | |||
| 1.3.6.1.4.1.164.6.1.12.3.18 | NoderadAce3105 | |||
| 1.3.6.1.4.1.164.6.1.12.3.19 | NoderadAce3220 | |||
| 1.3.6.1.4.1.164.6.1.13 | NoderadSysLA | |||
| 1.3.6.1.4.1.164.6.1.13.1 | NoderadLA140 | |||
| 1.3.6.1.4.1.164.6.1.13.2 | NoderadLA110 | |||
| 1.3.6.1.4.1.164.6.1.13.3 | NoderadLA104 | |||
| 1.3.6.1.4.1.164.6.1.13.4 | NoderadLA130 | |||
| 1.3.6.1.4.1.164.6.1.13.5 | NoderadLA210 | |||
| 1.3.6.1.4.1.164.6.1.100 | NoderadSysTerminal | |||
| 1.3.6.1.4.1.164.6.2 | Nodeagnt | |||
| 1.3.6.1.4.1.164.6.2.1 | ScalaragnHwVersion | read-write | current | ASCII string for description and display of the agent hardware version, as it is known by the agent software.The user can update the version upon request when … |
| 1.3.6.1.4.1.164.6.2.2 | ScalaragnTrapMask | read-write | current | The value of this attribute determines the type of traps the agent should mask and not send to the management console. The value is differently determined for … |
| 1.3.6.1.4.1.164.6.2.3 | ScalaragnTrapValue | read-only | deprecated | The value of the trap decoded in internal RAD format. Full description is given in the Trap definition file |
| 1.3.6.1.4.1.164.6.2.4 | ScalaragnChangeCnt | read-only | current | The number of changes in system configuration that were reported to the manager since last cold start |
| 1.3.6.1.4.1.164.6.2.5 | ScalaragnSpecific | read-only | current | Object identifier of entity containing additional information regarding this instance. |
| 1.3.6.1.4.1.164.6.2.6 | ScalaragnConfigMsg | read-only | current | Full configuration message coded in internal RAD application format. This entry describes agent's configuration. For MP-2200 R3, this object describes agent's … |
| 1.3.6.1.4.1.164.6.2.7 | TablemngTrapIpTable | not-accessible | current | This table indicates the destination address of the traps. Internally it will be limited to ten addresses. |
| 1.3.6.1.4.1.164.6.2.7.1 | RowmngEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.6.2.7.1.1 | ColumnmngID | read-only | current | This value indicates an index of a specific IP address |
| 1.3.6.1.4.1.164.6.2.7.1.2 | ColumnmngIP | read-write | current | This value indicates the destination address of the traps. IP 0.0.0.0 removes the entry. |
| 1.3.6.1.4.1.164.6.2.7.1.3 | ColumnmngIPMask | read-write | deprecated | This value indicates the mask of the destination addresses of the traps. |
| 1.3.6.1.4.1.164.6.2.7.1.4 | ColumnmngTrapMask | read-write | current | The value of this attribute determines the type of traps the agent should mask and not send to this NMS. The value is differently determined for different prod… |
| 1.3.6.1.4.1.164.6.2.7.1.5 | ColumnmngAlarmTrapMask | read-write | current | The value of this object determines the alarm traps that the agent should mask (not send to this manager). The value is an Octet String, where each bit is assi… |
| 1.3.6.1.4.1.164.6.2.7.1.6 | ColumnmngSnmpTrapUdpPort | read-write | current | This variable enables to set the UDP port (socket) used for SNMP traps. |
| 1.3.6.1.4.1.164.6.2.8 | ScalaragnIndication | read-only | current | Attribute describing the state of the entity the agent is responsible for. In case of a modular entity, the value of this attribute will be according to the co… |
| 1.3.6.1.4.1.164.6.2.9 | ScalaragnMonitorModeCmd | read-write | current | Setting this attribute to ON, will enforce the agent to change its mode of operation to Monitor Mode |
| 1.3.6.1.4.1.164.6.2.10 | ScalaragnLed | read-only | current | This entry specifies the LEDs status of the agent module . Each led will be represented by 4 bits where the first 2 bits (left) will specify the status : (00=N… |
| 1.3.6.1.4.1.164.6.2.11 | TabletrapTable | not-accessible | current | This table may include the last few traps generated by the agent, for future retrieval. The table has a limited capacity. If traps are not retrieved in proper … |
| 1.3.6.1.4.1.164.6.2.11.1 | RowtrapEntry | not-accessible | current | An entry in trapTable. |
| 1.3.6.1.4.1.164.6.2.11.1.1 | ColumntrapID | read-only | current | This object indicates an index of a specific trap. Can be used also for any trap, while trapVal is used as 'accessible-for-notify' or trapNumeric is used. |
| 1.3.6.1.4.1.164.6.2.11.1.2 | ColumntrapVal | read-only | current | This object is the actual ASCII description of the trap. It can be used also as attached variable of traps, in order to detail in explicit ASCII text, data of … |
| 1.3.6.1.4.1.164.6.2.11.1.3 | ColumntrapTimeSinceOccurrence | read-only | current | This object indicates the amount of time passed since the occurrence of the event that triggered this trap. |
| 1.3.6.1.4.1.164.6.2.11.1.4 | ColumntrapNumeric | accessible-for-notify | current | This object is a numeric general parameter, that can be attached to any trap. Values can be positive or negative. |
| 1.3.6.1.4.1.164.6.2.12 | NodefileTransfer | |||
| 1.3.6.1.4.1.164.6.2.12.1 | ScalarfileServerIP | read-write | current | The IP address of the server from which the file is loaded |
| 1.3.6.1.4.1.164.6.2.12.2 | ScalarfileName | read-write | current | The name of the file to be loaded. For protection, read returns NULL. |
| 1.3.6.1.4.1.164.6.2.12.3 | ScalarfileTransCmd | read-write | current | The command to be executed on fileName at fileServerIP. |
| 1.3.6.1.4.1.164.6.2.12.4 | ScalartftpRetryTimeOut | read-write | current | General Retransmission time-out value (seconds) |
| 1.3.6.1.4.1.164.6.2.12.5 | ScalartftpTotalTimeOut | read-write | current | Total Retransmission time-out value (seconds) |
| 1.3.6.1.4.1.164.6.2.12.6 | ScalartftpStatus | read-write | current | Status of tftp session. When a session ended with success, the tftpStatus should be endedOk(6). Before restarting a tftp session, the NMS should set the tftpSt… |
| 1.3.6.1.4.1.164.6.2.12.7 | ScalartftpError | read-only | current | The MSB represents the standard error code. The LSB represents the private error code. 0x0000 is No Error 0x0100 is File Not Found 0x0200 is Access violation 0… |
| 1.3.6.1.4.1.164.6.2.12.8 | ScalarfileTransferToSubSystems | read-write | current | This object represents the sub-systems the fileTransCmd refers to. It should be used when a system is divided to sub-systems and each sub-system (or part of th… |
| 1.3.6.1.4.1.164.6.2.12.9 | ScalarfileNameWithinProduct | read-write | current | The file name used by the product within the product file system. |
| 1.3.6.1.4.1.164.6.2.12.10 | TableintSwdlTable | not-accessible | current | This parameters table is for internal Software down load. It also includes data about all files contained in the Object from which down-load is performed. |
| 1.3.6.1.4.1.164.6.2.12.10.1 | RowintSwdlEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.6.2.12.10.1.1 | ColumnintSwdlObjIdx | read-only | current | The index of the object from which down-load is performed. |
| 1.3.6.1.4.1.164.6.2.12.10.1.2 | ColumnintSwdlFileIdx | read-only | current | The index of the files included in intSwdlObjIdx. One of these files can be selected to be internally downloaded. |
| 1.3.6.1.4.1.164.6.2.12.10.1.3 | ColumnintSwdlFileName | read-only | current | The name of the file. |
| 1.3.6.1.4.1.164.6.2.12.10.1.4 | ColumnintSwdlFileSwVer | read-only | current | The software version of the file. |
| 1.3.6.1.4.1.164.6.2.12.10.1.5 | ColumnintSwdlSwDate | read-only | current | The software version date of the file. |
| 1.3.6.1.4.1.164.6.2.12.10.1.6 | ColumnintSwdlSize | read-only | current | The size of the file. |
| 1.3.6.1.4.1.164.6.2.12.10.1.7 | ColumnintSwdlCmd | read-write | current | The command to down-load a SW file to an object. The Agent will change the value of this MIB object to off(2) automatically, after accepting the command. |
| 1.3.6.1.4.1.164.6.2.12.10.1.8 | ColumnintSwdlToSubSystem | read-write | current | This object defines the subsystem for download. Bit='1'- APPLY to respective sub system. Bit='0'- DO NOT APPLY to respective sub system. For more details see p… |
| 1.3.6.1.4.1.164.6.2.12.10.1.9 | ColumnintSwdlCardType | read-only | current | This object defines the Card type that this file is relevant for. |
| 1.3.6.1.4.1.164.6.2.12.10.1.10 | ColumnintSwdlFlashIdx | read-only | current | The index of the flash memory this file is stored in (1 or 2) (Example: 1= The file is stored in flash No.1). ASMi52 file will always be stored in Flash No.2 (… |
| 1.3.6.1.4.1.164.6.2.12.11 | TableswdlStatusTable | not-accessible | current | This parameters table is for software download status. It also includes data about the files down-loaded or attempted to be down-loaded. |
| 1.3.6.1.4.1.164.6.2.12.11.1 | RowswdlStatusEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.6.2.12.11.1.1 | ColumnswdlStatusTypeIdx | read-only | current | The index of the down-load type (e.g. external (1) or internal (2)). |
| 1.3.6.1.4.1.164.6.2.12.11.1.2 | ColumnswdlStatusIdx | read-only | current | The index of the status rows. |
| 1.3.6.1.4.1.164.6.2.12.11.1.3 | ColumnswdlStatusFileName | read-only | current | The name of the file. |
| 1.3.6.1.4.1.164.6.2.12.11.1.4 | ColumnswdlStatusSlot | read-only | current | The slot of the updated (or attempted to be updated) object. |
| 1.3.6.1.4.1.164.6.2.12.11.1.5 | ColumnswdlStatusSubSystem | read-only | current | The subsystem that updated (or attempted to be updated). |
| 1.3.6.1.4.1.164.6.2.12.11.1.6 | ColumnswdlStatusStatus | read-only | current | The status of the down load process. Value: Fail (2), OK (3), InProcess (4). |
| 1.3.6.1.4.1.164.6.2.12.11.1.7 | ColumnswdlStatusTime | read-only | current | This MIB parameter indicates the time SW download was finished. The format shuld be YYYY-MM-DD, hh:mm:ss |
| 1.3.6.1.4.1.164.6.2.12.12 | ScalarclearDwldStatusLog | read-write | current | This object clears the status log. Value: off(2), external(3), internal(4) The Agent will change the value of this MIB object to off(2) automatically, after ac… |
| 1.3.6.1.4.1.164.6.2.12.13 | NodeautoFileTransfer | |||
| 1.3.6.1.4.1.164.6.2.12.13.1 | TableautoFileTransferTable | not-accessible | current | Scheduling configuration table for Agent initiated file transfer. |
| 1.3.6.1.4.1.164.6.2.12.13.1.1 | RowautoFileTransferEntry | not-accessible | current | An entry in the table. |
| 1.3.6.1.4.1.164.6.2.12.13.1.1.1 | ColumnautoFileTransferType | read-only | current | This object defines the type of file to be transferred by agent. |
| 1.3.6.1.4.1.164.6.2.12.13.1.1.2 | ColumnautoFileTransferServerIp | read-write | current | This object defines the IP Address of the server to which the file is uploaded. |
| 1.3.6.1.4.1.164.6.2.12.13.1.1.3 | ColumnautoFileTransferFileName | read-write | current | This object defines the name of the file to be uploaded. |
| 1.3.6.1.4.1.164.6.2.12.13.1.1.4 | ColumnautoFileTransferScheduling | read-write | current | This object defines schedule for TFTP Automatic session(s) initiated by Agent, according to the value selected: now - initiate immediate single session. recurr… |
| 1.3.6.1.4.1.164.6.2.12.13.1.1.5 | ColumnautoFileTransferTimeRecurrence | read-write | current | This object defines time reccurence interval, e.g. M can be 'every M days', 'every M hours' etc. Zero is used to indicate there's no time reccurence (0= notApp… |
| 1.3.6.1.4.1.164.6.2.12.13.1.1.6 | ColumnautoFileTransferOccurrenceRecurrence | read-write | current | This object defines Occurrence reccurence interval, e.g N can be in 'every N alarms', 'every N log entries' etc. zero is used to indicate There's no Event Recc… |
| 1.3.6.1.4.1.164.6.2.12.14 | ScalarfileTransferServerPort | read-write | current | Server Port number used for File Transfer. Applicable for SFTP. Valid values: 0..65535. |
| 1.3.6.1.4.1.164.6.2.12.15 | ScalarfileTransferProtocol | read-write | current | File Transfer protocol used. |
| 1.3.6.1.4.1.164.6.2.13 | ScalarsystemReset | read-write | current | Reset action to be performed on the system. - resetMapping - reset SDH/SONET mapping to default for all SDH/SONET links. - resetStandby(6) - can be used only b… |
| 1.3.6.1.4.1.164.6.2.14 | NodesystemTiming | |||
| 1.3.6.1.4.1.164.6.2.14.1 | ScalarsystemDate | read-write | current | System date. |
| 1.3.6.1.4.1.164.6.2.14.2 | ScalarsystemTime | read-write | current | System time. |
| 1.3.6.1.4.1.164.6.2.14.3 | ScalarsystemTimeElapsed | read-only | current | The number of seconds that have elapsed since the beginning of the current error-measurement period. Same for all ports of the device. |
| 1.3.6.1.4.1.164.6.2.14.4 | NodesystemNtp | |||
| 1.3.6.1.4.1.164.6.2.14.4.1 | ScalarsystemNtpMode | read-write | current | This variable represents the NTP Mode. |
| 1.3.6.1.4.1.164.6.2.14.4.2 | ScalarsystemNtpGmt | read-write | current | This variable represents the NTP GMT (Greenwich Mean Time), Possible values range is -12..12. For new devices/versions this variable will be in minutes. |
| 1.3.6.1.4.1.164.6.2.14.4.3 | ScalarsystemNtpServerAddressType | read-write | current | This variable represents the NTP Server Address Type. |
| 1.3.6.1.4.1.164.6.2.14.4.4 | ScalarsystemNtpServerAddress | read-write | current | This variable represents the NTP Server Address. |
| 1.3.6.1.4.1.164.6.2.14.4.5 | ScalarsystemNtpUpdateInterval | read-write | current | This variable represents the NTP Update Interval, measured in seconds. It means, minimum time between two consecutive NTP requests. |
| 1.3.6.1.4.1.164.6.2.14.4.6 | ScalarsystemNtpCmd | read-write | current | This variable represents NTP possible commands. After the Agent accepts a command, it will automatically change the value to off(2). |
| 1.3.6.1.4.1.164.6.2.14.4.7 | ScalarsystemNtpTimeSinceLastPoll | read-only | current | Time in seconds, that passed from last polling of the configured SNTP servers. 0=Not Applicable (when this time is not known). |
| 1.3.6.1.4.1.164.6.2.14.4.8 | ScalarsystemNtpModeBITS | read-write | current | If Bit 0 (broadcastClient) is '1', Broadcast Mode is enabled, meaning that the device listens to the NTP broadcast messages and learns timestamps from them. If… |
| 1.3.6.1.4.1.164.6.2.14.4.9 | ScalarsystemNtpCurrentSourceType | read-only | current | Type IP address of the NTP server currently providing system TOD. |
| 1.3.6.1.4.1.164.6.2.14.4.10 | ScalarsystemNtpCurrentSource | read-only | current | IP Address (ipv4) of the Server (or Local HW) providing the current Date and Time of the device. 127.0.0.1 = local HW clock is used. 0.0.0.0 = no clock is avai… |
| 1.3.6.1.4.1.164.6.2.14.4.11 | TablesntpServerTable | not-accessible | current | This table contains parameters for each NTP Server. Entries in the table can be dynamically created. The entries created by user via sntpServerRowStatus, can a… |
| 1.3.6.1.4.1.164.6.2.14.4.11.1 | RowsntpServerEntry | not-accessible | current | An entry in the NTP Server table. |
| 1.3.6.1.4.1.164.6.2.14.4.11.1.1 | ColumnsntpServerID | not-accessible | current | The number (index) of the NTP Server. |
| 1.3.6.1.4.1.164.6.2.14.4.11.1.2 | ColumnsntpServerRowStatus | read-create | current | This object enables creation and deletion of entries in the sntpServerTable. |
| 1.3.6.1.4.1.164.6.2.14.4.11.1.3 | ColumnsntpServerAddressType | read-create | current | Server Address type, indicating IPv4(1) or IPv6(2). |
| 1.3.6.1.4.1.164.6.2.14.4.11.1.4 | ColumnsntpServerAddress | read-create | current | IP Address of the NTP Server. |
| 1.3.6.1.4.1.164.6.2.14.4.11.1.5 | ColumnsntpServerPort | read-create | current | Source UDP port of the device for sending requests to a configured NTP Server. |
| 1.3.6.1.4.1.164.6.2.14.4.11.1.6 | ColumnsntpServerPreference | read-create | current | This object marks the Preferred Server. 1 = Preferred (only one Server can have this value) 2 - Not Preferred. |
| 1.3.6.1.4.1.164.6.2.14.4.11.1.7 | ColumnsntpServerAdminStatus | read-create | current | Administrative Status of the NTP Server. |
| 1.3.6.1.4.1.164.6.2.14.4.11.1.8 | ColumnsntpServerType | read-only | current | Type of the NTP Server. |
| 1.3.6.1.4.1.164.6.2.14.4.11.1.9 | ColumnsntpServerLastReceivedTimestamp | read-only | current | Last received Date and Time from the NTP Server, according to Local Time. 0000 0000 = Not Applicable. |
| 1.3.6.1.4.1.164.6.2.14.4.11.1.10 | ColumnsntpServerLastReceivedStratum | read-only | current | Last received Stratum from the NTP Server. 0xFFFFFFFF = Not Applicable. |
| 1.3.6.1.4.1.164.6.2.14.4.11.1.11 | ColumnsntpServerTimeSinceLastReceivedMessage | read-only | current | Time passed since last received message from the NTP Server. |
| 1.3.6.1.4.1.164.6.2.14.4.11.1.12 | ColumnsntpServerSendRequestNow | read-create | current | Upon setting this parameter to 'on', an immediate request should be sent to the specified NTP Server. After sending the request, the value 'off' will be resume… |
| 1.3.6.1.4.1.164.6.2.14.5 | TableschedXTable | not-accessible | current | An Augment to the Schedule table (schedTable in DISMAN-SCHEDULE-MIB; RFC-3231). |
| 1.3.6.1.4.1.164.6.2.14.5.1 | RowschedXEntry | not-accessible | current | An entry in the table. |
| 1.3.6.1.4.1.164.6.2.14.5.1.1 | ColumnschedYear | read-create | current | The year during which the scheduled action should take place. |
| 1.3.6.1.4.1.164.6.2.14.5.1.2 | ColumnschedWeekInMonth | read-create | current | The week in month (schedMonth) during which the scheduled action should take place. |
| 1.3.6.1.4.1.164.6.2.14.5.1.3 | ColumnschedParam | read-create | current | A Parameter that might be used whenever the scheduled action takes place. For summer-time schedule - This variable represents the time offset (in minutes), mea… |
| 1.3.6.1.4.1.164.6.2.15 | NodesystemPort | |||
| 1.3.6.1.4.1.164.6.2.15.1 | TablephysicalConnectorTable | not-accessible | current | This table includes the connector type of ports or interfaces. |
| 1.3.6.1.4.1.164.6.2.15.1.1 | RowphysicalConnectorEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.6.2.15.1.1.1 | ColumnportIdx | read-only | current | This object is an index of the specific port or interface. For a port, the index will be as agreed between agent and application. For an interface, ifIndex may… |
| 1.3.6.1.4.1.164.6.2.15.1.1.2 | ColumnphysicalConnector | read-only | current | The connector of the port/interface. other - none of the specified connectors none - no connector. |
| 1.3.6.1.4.1.164.6.2.15.1.1.3 | ColumnportOptWaveLength | read-only | current | Wave Length of an Optical interface/port in [nm] and specification if Laser or not. notApplicable - for non-optical ports. |
| 1.3.6.1.4.1.164.6.2.15.1.1.4 | ColumnportOptMode | read-only | current | Laser Mode of an Optical Laser interface/port. notApplicable - for non-Laser ports. |
| 1.3.6.1.4.1.164.6.2.15.1.1.5 | ColumnportBalance | read-write | current | This object is according to the port Impedance. For T1 - always balanced. For E1 - there are different impedance values for balanced and unbalanced. |
| 1.3.6.1.4.1.164.6.2.15.1.1.6 | ColumnportDdmSupport | read-only | current | SFP (Small Form Pluggable) port -support Digital Diagnostics Monitoring. |
| 1.3.6.1.4.1.164.6.2.15.1.1.7 | ColumnportMfgName | read-only | current | (SFP) Port Manufacturer name (Maximum - 16 characters). |
| 1.3.6.1.4.1.164.6.2.15.1.1.8 | ColumnportTypicalMaxRange | read-only | current | Maximum range supported by SFP port, in meter units. |
| 1.3.6.1.4.1.164.6.2.15.1.1.9 | ColumnphysicalConnectorString | read-only | current | (SFP) connector type. It can be Vendor Specific (unknown in advance). Being a string, the object is not affected by any future new connectors. This object will… |
| 1.3.6.1.4.1.164.6.2.15.1.1.10 | ColumnportVendorPartNo | read-only | current | SFP Vendor Part Number. Being a string, the object is not affected by any future new SFPs. |
| 1.3.6.1.4.1.164.6.2.15.2 | NodeprtSupervisory | |||
| 1.3.6.1.4.1.164.6.2.15.2.1 | TableprtSpTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.6.2.15.2.1.1 | RowprtSpEntry | not-accessible | current | Supervisory port parameter table. |
| 1.3.6.1.4.1.164.6.2.15.2.1.1.1 | ColumnprtSupervisoryIndex | read-only | current | The SP port index. For some products, having modules (cards): The LS byte of the integer is the port index 1..255. The MS byte is different than 0 only if the … |
| 1.3.6.1.4.1.164.6.2.15.2.1.1.2 | ColumnprtSupervisoryRate | read-write | current | This attribute indicates the operation rate (speed) of the port. auto - automatic rate selection, by the agent. |
| 1.3.6.1.4.1.164.6.2.15.2.1.1.3 | ColumnprtSupervisoryDataBits | read-write | current | This attribute indicates the number of data bits in an async frame |
| 1.3.6.1.4.1.164.6.2.15.2.1.1.4 | ColumnprtSupervisoryParity | read-write | current | This attribute indicates the parity mode in an async frame |
| 1.3.6.1.4.1.164.6.2.15.2.1.1.5 | ColumnprtSupervisoryStopBits | read-write | current | This attribute indicates the parity mode in an async frame. |
| 1.3.6.1.4.1.164.6.2.15.2.1.1.6 | ColumnprtSupervisoryUsage | read-write | current | This attribute indicates the usage of the SP port. |
| 1.3.6.1.4.1.164.6.2.15.2.1.1.7 | ColumnprtSupervisoryInterface | read-write | current | This attribute indicates the supervisory port interface. |
| 1.3.6.1.4.1.164.6.2.15.2.1.1.8 | ColumnprtSupervisoryCTS | read-write | current | CTS line state. |
| 1.3.6.1.4.1.164.6.2.15.2.1.1.9 | ColumnprtSupervisoryDcdDelay | read-write | current | DCD delay in msec. |
| 1.3.6.1.4.1.164.6.2.15.2.1.1.10 | ColumnprtSupervisoryDSR | read-write | current | DSR line state. |
| 1.3.6.1.4.1.164.6.2.15.2.1.1.11 | ColumnprtSupervisoryRoutProtocol | read-write | current | This attribute indicates the routing protocol of the port. notApplicable - for DP. |
| 1.3.6.1.4.1.164.6.2.15.3 | NodeprtPerformance | |||
| 1.3.6.1.4.1.164.6.2.15.3.1 | TableprtPerfTable | not-accessible | current | This table includes G.826 ports or interfaces. |
| 1.3.6.1.4.1.164.6.2.15.3.1.1 | RowprtPerfEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.6.2.15.3.1.1.1 | ColumnprtPerfIdx | read-only | current | This object is an index of the specific port or interface. For a port, the index will be as agreed between agent and application. For an interface, ifIndex may… |
| 1.3.6.1.4.1.164.6.2.15.3.1.1.2 | ColumnprtPerfPeriodRef | read-only | current | This object is an index that specifies which period of time, the next 5 objects refer to. currentPeriod - the period since last prtPerfSaveAndResetCmd received… |
| 1.3.6.1.4.1.164.6.2.15.3.1.1.3 | ColumnprtPerfElapsedTime | read-only | current | Elapsed Time in seconds. - for prtPerfPeriodRef=currentPeriod: The period since last prtPerfSaveAndResetCmd received or since Start-up (if no prtPerfSaveAndRes… |
| 1.3.6.1.4.1.164.6.2.15.3.1.1.4 | ColumnprtPerfUAS | read-only | current | Number of Unavailable Seconds for the reference period (prtPerfPeriodRef). |
| 1.3.6.1.4.1.164.6.2.15.3.1.1.5 | ColumnprtPerfES | read-only | current | Number of Errored Seconds for the reference period (prtPerfPeriodRef). |
| 1.3.6.1.4.1.164.6.2.15.3.1.1.6 | ColumnprtPerfSES | read-only | current | Number of Severely Errored Seconds for the reference period (prtPerfPeriodRef). |
| 1.3.6.1.4.1.164.6.2.15.3.1.1.7 | ColumnprtPerfBBE | read-only | current | Number of Background Block (or Frame) Errors for the reference period (prtPerfPeriodRef). |
| 1.3.6.1.4.1.164.6.2.15.3.1.1.8 | ColumnprtPerfBlocksPerSec | read-only | current | Blocks per second (or frames per second) of the port/interface indicated by portIdx. This object is constant for a certain port/interface. It is not affected b… |
| 1.3.6.1.4.1.164.6.2.15.3.1.1.9 | ColumnprtPerfTimeTag | read-only | current | Time Tag of Last Period: sysUpTime when last prtPerfSaveAndResetCmd was executed. This object is applicable only for prtPerfPeriodRef=lastPeriod. For prtPerfPe… |
| 1.3.6.1.4.1.164.6.2.15.3.1.1.10 | ColumnprtPerfSaveAndResetCmd | read-write | current | A command per port/interface, to Save data of Current Period in Last Period data-set and start a new counting period for Current Period. This object is applica… |
| 1.3.6.1.4.1.164.6.2.15.4 | NodeprtTest | |||
| 1.3.6.1.4.1.164.6.2.15.4.1 | TableprtTestTable | not-accessible | current | This table includes test data for ports or interfaces. |
| 1.3.6.1.4.1.164.6.2.15.4.1.1 | RowprtTestEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.6.2.15.4.1.1.1 | ColumnprtTestIdx | read-only | current | This object is an index of the specific port or interface. For a port, the index will be as agreed between agent and application. For an interface, ifIndex may… |
| 1.3.6.1.4.1.164.6.2.15.4.1.1.2 | ColumnprtTestCmdAndStatus | read-write | current | Setting this object to a value as detailed further on (except 0) will initiate a test on the specific port. The test/s requested will be set according to the r… |
| 1.3.6.1.4.1.164.6.2.15.4.1.1.3 | ColumnprtBertCounter | read-only | current | This object indicates the number of BERT errors encountered during the BERT operation. It is valid only when BERT (Bit Error Rate Test) is active on the specif… |
| 1.3.6.1.4.1.164.6.2.15.4.1.1.4 | ColumnprtTestInitiator | read-only | current | This object indicates who initiated this port's test/s. |
| 1.3.6.1.4.1.164.6.2.15.4.1.1.5 | ColumnprtTestTimeout | read-write | current | This object is applicable only when a single test is running. It indicates the test activation timeout in minutes. For RICi-E1T1, RICi-E3T3 and LRS-16, the mea… |
| 1.3.6.1.4.1.164.6.2.15.4.1.1.6 | ColumnprtTestVctRxResult | read-only | current | This object indicates the result of the Vct on the cable connected to the RX connector. |
| 1.3.6.1.4.1.164.6.2.15.4.1.1.7 | ColumnprtTestVctTxResult | read-only | current | This object indicates the result of the Vct on the cable connected to the TX connector. |
| 1.3.6.1.4.1.164.6.2.15.4.1.1.8 | ColumnprtTestVctRxDistance | read-only | current | This object indicates the distance in Meters to the RX cable Open/ Short location discovered by the Vct. This parameter is applicable for Vct Result = Normal o… |
| 1.3.6.1.4.1.164.6.2.15.4.1.1.9 | ColumnprtTestVctTxDistance | read-only | current | This object indicates the distance in Meters to the TX cable Open/ Short location discovered by the Vct. This parameter is applicable for Vct Result = Normal o… |
| 1.3.6.1.4.1.164.6.2.15.4.1.1.10 | ColumnprtTestVctCmd | read-write | current | Vct command. on (3) = Start Vct on both cables connected to RX and TX connectors of this port. Agent will perform the required command and change automatically… |
| 1.3.6.1.4.1.164.6.2.15.4.1.1.11 | ColumnprtTestVctRxCrossPair | read-only | current | This object should be equal to the Index (prtTestIdx) of the Rx cross pair. This object is applicable only for Vct Result = shortToCrossPair or coupleWithCross… |
| 1.3.6.1.4.1.164.6.2.15.4.1.1.12 | ColumnprtTestVctTxCrossPair | read-only | current | This object should be equal to the Index (prtTestIdx) of the Tx cross pair. This object is applicable only for Vct Result = shortToCrossPair or coupleWithCross… |
| 1.3.6.1.4.1.164.6.2.15.4.1.1.13 | ColumnprtTestActivationDelay | read-write | current | This object is applicable only when a single test is running. It indicates test activation delay in seconds. A Value of 0 indicates that the test starts immedi… |
| 1.3.6.1.4.1.164.6.2.15.4.1.1.14 | ColumnprtTestMacSwapLoopDataMode | read-write | current | This object defines which part of the data will be looped back. |
| 1.3.6.1.4.1.164.6.2.15.4.1.1.15 | ColumnprtTestMacSwapLoopVlanId | read-write | current | This object specifies the VLAN ID for prtTestMacSwapLoopDataMode=specificVlan. |
| 1.3.6.1.4.1.164.6.2.15.4.1.1.16 | ColumnprtTestMacSwapLoopDirection | read-write | current | This object defines the direction of the performed loopback. In ETX102 'local' corresponds to Ingress loop (either on User port or on Network port), and 'remot… |
| 1.3.6.1.4.1.164.6.2.15.4.1.1.17 | ColumnprtTestMacSwapLoopDestAddr | read-write | current | Configures the MAC address that will be sent in the Destination field of the packet in the outgoing direction. |
| 1.3.6.1.4.1.164.6.2.15.4.1.1.18 | ColumnprtTestMacSwapLoopSrcAddr | read-write | current | Configures the MAC address that will be sent in the Source field of the packet in the outgoing direction. |
| 1.3.6.1.4.1.164.6.2.15.4.1.1.19 | ColumnprtTestOamMinRoundTripDelay | read-only | current | The mininal value of round trip delay of loopback message for a session of OAM loopback.Units are msec. |
| 1.3.6.1.4.1.164.6.2.15.4.1.1.20 | ColumnprtTestOamMaxRoundTripDelay | read-only | current | The maximum value of round trip delay of loopback message for a session of OAM loopback.Units are msec. |
| 1.3.6.1.4.1.164.6.2.15.4.1.1.21 | ColumnprtTestOamAvgRoundTripDelay | read-only | current | The average round trip delay of loopback message for a session of OAM loopback.Units are msec. |
| 1.3.6.1.4.1.164.6.2.15.4.1.1.22 | ColumnprtTestOamTxInterval | read-write | current | Indicates the interval between loopback sent messages.Units are msec. |
| 1.3.6.1.4.1.164.6.2.15.4.1.1.23 | ColumnprtTestDestinationIpAddress | read-write | current | Indicates the destination IP Address in the transmitted messages that are looped back. |
| 1.3.6.1.4.1.164.6.2.15.4.1.1.24 | ColumnprtTestForceTTL | read-write | current | Time-to-live.Number of hops the loopback message will go through the net before deciding to discard it. |
| 1.3.6.1.4.1.164.6.2.15.4.1.1.25 | ColumnprtTestBwProfile | read-write | deprecated | Indicates the BW profile (from bwProfileTable) that is assigned to the loopback test in order to limit the traffic that is looped back. |
| 1.3.6.1.4.1.164.6.2.15.4.1.1.26 | ColumnprtTestSourceIpAddress | read-write | current | Indicates the source IP Address in the transmitted messages that are looped back. |
| 1.3.6.1.4.1.164.6.2.15.4.1.1.27 | ColumnprtTestRemainTime | read-write | current | Indicates the remain time for test activation in seconds. |
| 1.3.6.1.4.1.164.6.2.15.5 | NodeprtParam | |||
| 1.3.6.1.4.1.164.6.2.15.5.1 | TableprtParamTable | not-accessible | current | This table includes general port parameters. The meaning is different for every product that supports it due to a general parameter - prtControlCnfg. For ACE20… |
| 1.3.6.1.4.1.164.6.2.15.5.1.1 | RowprtParamEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.1 | ColumnprtParamIdx | read-only | current | This object is an index of the specific port or interface. For a port, the index will be as agreed between agent and application. For an interface, ifIndex may… |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.2 | ColumnprtControlCnfg | read-write | current | This object may be used for port RW general parameter/s. For detailed meaning, see product's spec. Supported by: PRBi-E3/T3. For ACE2002: This parameter will i… |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.3 | ColumnprtParamClkSrc | read-write | current | The source of Transmit Clock. 'loopTiming' or 'loopback' indicates that the recovered receive clock is used as the transmit clock. 'localTiming' or 'internal' … |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.4 | ColumnprtParamPhantom | read-write | current | Power feeding to another device. |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.5 | ColumnprtParamResetStatsCmd | read-write | current | Reset statistics of the selected port. |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.6 | ColumnprtParamLastResetStatsTime | read-only | current | The value of MIB II's sysUpTime object at the last time that prtParamResetStatsCmd was Set to on(3) for this port. If prtParamResetStatsCmd was never Set to on… |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.7 | ColumnprtParamInterfaceType | read-write | current | The type of the port. |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.8 | ColumnprtParamClearAlarm | read-write | current | Setting this attribute to ON, will enforce a clear operation on the Port Alarms. Upon completion, the value will automatically change to off(2). |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.9 | ColumnprtParamLeds | read-only | current | This entry specifies the LEDs status of the port. Each led is represented by 4 bits where the first 2 bits (left) specify the status : (00=NA, 01=OFF, 10=ON, 1… |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.10 | ColumnprtParamLineLength | read-write | current | Line Length of the line connected to this port. |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.11 | ColumnprtParamUsage | read-write | current | Defines whether this port works as User port or as Network port. |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.12 | ColumnprtParamMappingMode | read-write | current | This object defines path protection on SONET/SDH link Auto - SONET/SDH mapping for port is copied automatically to same TU on the redundant SONET/SDH local (re… |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.13 | ColumnprtParamAlarmIndication | read-only | current | This object indicates status-aggregation of non-masked alarms associated with all interface layers, related to this physical port. When at least one non-masked… |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.14 | ColumnprtParamClkQualityLevel | read-only | current | This parameter indicates quality level of clock signal. Quality is encoded according to SSM (Synchronization Status Messages) encoding. Bits 8 -5 of byte are e… |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.15 | ColumnprtParamClkWaveShape | read-write | current | Wave shape of station clock source signal. |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.16 | ColumnprtParamStatus | read-only | current | Station clock source Status. |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.17 | ColumnprtParamSignalLevel | read-only | current | This object indicates signal level (in thenth of dB units) on selected port. |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.18 | ColumnprtParamClkUserQualityLevel | read-write | current | This parameter allows user to mark quality level of clock. Quality is encoded according to SSM (Synchronization Status Messages) encoding. Bits 8 -5 of byte ar… |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.19 | ColumnprtParamDataRate | read-write | current | Rate of serial data port (V.11, V.24, V.35) in kbps units. |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.20 | ColumnprtParamLoopDetect | read-write | current | Enable/disable Loop Detection on a port. Examples of ports: physical, Channelized Bundle over TDM Uplink, Bridge Ports. |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.21 | ColumnprtParamActUponLoopDetect | read-write | current | This parameter is used to indicate which actions should be taken in case a loop is detected in the network the port is part of. Each action is represented by a… |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.22 | ColumnprtParamPSNLayer | read-write | current | This object indicates the network layer from which clock is derived. |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.23 | ColumnprtParamRxSsm | read-write | current | This object indicates if Station Clock SSM messages received will serve as criteria for clock selection. |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.24 | ColumnprtParamClkSsmRxSource | read-write | current | This object indicates the Sa-bit of the E1 frame, in which SSM messages are carried. |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.26 | ColumnprtParamFarEndDevice | read-write | current | Programmed Far-End device connected to this port. This object is relevant for products having multiple DBs. It will enable configuring offline, the relevant da… |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.27 | ColumnprtParamTxClk | read-write | current | enable/disable station clock signal output. |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.28 | ColumnprtParamSdBerThreshold | read-write | current | The Signal Degrade Bit Error Rate Threshold. The negated value of this number is used as the exponent of 10 for computing the threshold value for the Bit Error… |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.29 | ColumnprtParamLoopDetectStatus | read-only | current | This object shows whether a loop was detected on the current port. |
| 1.3.6.1.4.1.164.6.2.15.6 | NodeprtIP | |||
| 1.3.6.1.4.1.164.6.2.15.6.1 | TableprtIpParamTable | not-accessible | current | A table - Parameters for IP Ports. |
| 1.3.6.1.4.1.164.6.2.15.6.1.1 | RowprtIpParamEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.6.2.15.6.1.1.1 | ColumnprtIpParamConfigIdx | read-only | current | This object indicates the Configuration number (1..255) referred. Value of 255 specifies the TmpCnfg (Scratch). For products having Agent and Edit configuratio… |
| 1.3.6.1.4.1.164.6.2.15.6.1.1.2 | ColumnprtIpParamSlotIdx | read-only | current | This object indicates a unique number of the slot position in which the module is inserted. notApplicable = 255 (for products that don't have slots). For KM: k… |
| 1.3.6.1.4.1.164.6.2.15.6.1.1.3 | ColumnprtIpParamIdx | read-only | current | This object indicates a unique Port Index. |
| 1.3.6.1.4.1.164.6.2.15.6.1.1.4 | ColumnprtIpParamHostIP | read-write | current | The host interface IP address. |
| 1.3.6.1.4.1.164.6.2.15.6.1.1.5 | ColumnprtIpParamHostMask | read-write | current | The host interface subnet mask. |
| 1.3.6.1.4.1.164.6.2.15.6.1.1.6 | ColumnprtIpParamDefaultGateway | read-write | current | Default Gateway's IP Address. |
| 1.3.6.1.4.1.164.6.2.15.6.1.1.7 | ColumnprtIpParamMediaMode | read-only | current | This object indicates the real Media Mode. |
| 1.3.6.1.4.1.164.6.2.15.6.1.1.8 | ColumnprtIpParamMediaRate | read-only | current | This object indicates the real Media Rate (Mbps). |
| 1.3.6.1.4.1.164.6.2.15.6.1.1.9 | ColumnprtIpParamMngVlanSupport | read-write | current | Management VLAN support (Tagging). no - No support of VLAN Tagging. yes - 4 VLAN bytes will be added to the frame. |
| 1.3.6.1.4.1.164.6.2.15.6.1.1.10 | ColumnprtIpParamMngVlanId | read-write | current | Management VLAN ID. |
| 1.3.6.1.4.1.164.6.2.15.6.1.1.11 | ColumnprtIpParamMngVlanPriority | read-write | current | Management VLAN Frame priority. |
| 1.3.6.1.4.1.164.6.2.15.6.1.1.12 | ColumnprtIpParamRingMode | read-write | current | This object indicates If Ring Mode is enabled or not. |
| 1.3.6.1.4.1.164.6.2.15.6.1.1.13 | ColumnprtIpParamProtIpEnable | read-write | current | This object indicates whether a list of Protected IP Addresses is enabled or not. This object is applicable only if prtIpParamRingMode=enable. |
| 1.3.6.1.4.1.164.6.2.15.6.1.1.14 | ColumnprtIpParamTrafficPriority | read-write | current | This object indicates the traffic priority of this port. |
| 1.3.6.1.4.1.164.6.2.15.6.1.1.15 | ColumnprtIpParamRemoteIP | read-write | current | This is the IP Address of the remote device that is connected to the current device (Point to Point Application). It is used for sending OAM packets on the LAN… |
| 1.3.6.1.4.1.164.6.2.15.6.1.1.16 | ColumnprtIpParamMaxTxBandwidth | read-write | current | This object shows the Max Bandwidth allowed on the LAN. Full - means that a Maximum of 100 Mega Byte Rate may go through the LAN. e1(3) means that the maximum … |
| 1.3.6.1.4.1.164.6.2.15.6.1.1.17 | ColumnprtIpParamTos | read-write | current | TOS = Type of Service transmitted. Valid values: 0..255. |
| 1.3.6.1.4.1.164.6.2.15.6.1.1.18 | ColumnprtIpParamConnect | read-write | current | Port Connection. |
| 1.3.6.1.4.1.164.6.2.15.6.1.1.19 | ColumnprtIpParamAgingTime | read-write | current | Aging Time in seconds. |
| 1.3.6.1.4.1.164.6.2.15.6.1.1.20 | ColumnprtIpParamEncapsulationProt | read-write | current | Encapsulation Protocol. |
| 1.3.6.1.4.1.164.6.2.15.6.1.1.21 | ColumnprtIpParamEncapProtPort | read-write | current | Encapsulation Protocol Port (TCP/UDP Port). |
| 1.3.6.1.4.1.164.6.2.15.6.1.1.22 | ColumnprtIpParamVlanSupport | read-write | current | VLAN support (Tagging). 'no' - No support of VLAN Tagging. 'yes' - 4 VLAN bytes will be added to the frame. |
| 1.3.6.1.4.1.164.6.2.15.6.1.1.23 | ColumnprtIpParamVlanId | read-write | current | VLAN Identifier. |
| 1.3.6.1.4.1.164.6.2.15.6.1.1.24 | ColumnprtIpParamVlanPriority | read-write | current | VLAN Frame priority. |
| 1.3.6.1.4.1.164.6.2.15.6.1.1.25 | ColumnprtIpParamDoubleTagVlanId | read-write | current | VLAN Identifier of the Double Tagging VLAN. |
| 1.3.6.1.4.1.164.6.2.15.6.1.1.26 | ColumnprtIpParamDoubleTagVlanPriority | read-write | current | VLAN Frame priority of the Double Tagging VLAN. |
| 1.3.6.1.4.1.164.6.2.15.6.1.1.27 | ColumnprtIpParamVlanTagging | read-write | current | VLAN Tagging. 'unmodified' - No change will be done to the Frame. 'tag' - Add Tag to Untagged Frames. 'doubleTag' - Add Tag to all Frames. 'doubleTagAndFallBac… |
| 1.3.6.1.4.1.164.6.2.15.6.1.1.28 | ColumnprtIpParamRateLimit | read-write | current | The maximum rate permitted to transfer via this port, in Kbps. |
| 1.3.6.1.4.1.164.6.2.15.6.1.1.29 | ColumnprtIpParamDefInterface | read-write | current | The Default Interface for packets with unresolved destination subnet. For internal-X port: 100 + X . |
| 1.3.6.1.4.1.164.6.2.15.6.1.1.30 | ColumnprtIpParamMng | read-write | current | This object indicates whether Management is enabled/disabled via this port. |
| 1.3.6.1.4.1.164.6.2.15.6.1.1.31 | ColumnprtIpParamFloodedRateLimit | read-write | current | The maximum rate permitted to transfer broadcast, multicast, and unicast flooded frames via this port, in Kbps. 0 - Disable. In Ipmux14 this parameter is appli… |
| 1.3.6.1.4.1.164.6.2.15.6.1.1.32 | ColumnprtIpParamBurstSize | read-write | current | The burst size that the port can support beyond rate limitation determined in prtIpParamRateLimit. Burst Size is measured in bytes. |
| 1.3.6.1.4.1.164.6.2.15.6.1.1.33 | ColumnprtIpParamLimitPacketType | read-write | current | The packet type that will be rate limited. Rate limitation determined in prtIpParamRateLimit. all - All packet types are rate limited. broadMultiFloodedUnicast… |
| 1.3.6.1.4.1.164.6.2.15.6.1.1.34 | ColumnprtIpParamKeepAliveInterval | read-write | current | This parameter indicates the period of time (in msec.) between two consequent Keep Alive messages. |
| 1.3.6.1.4.1.164.6.2.15.6.1.1.35 | ColumnprtIpParamKeepAliveThresh | read-write | current | This parameter indicates the maximum number of missed Keep Alive answer messages acceptable, after which link status will be failed. |
| 1.3.6.1.4.1.164.6.2.15.6.1.1.36 | ColumnprtIpParamP2pKeepAliveVlanId | read-write | current | Dedicated VLAN ID for keep alive messages. |
| 1.3.6.1.4.1.164.6.2.15.6.1.1.37 | ColumnprtIpParamP2pKeepAliveVlanPrio | read-write | current | VLAN priority for P2P keep alive messages . |
| 1.3.6.1.4.1.164.6.2.15.6.1.1.38 | ColumnprtIpParamRingAdjacentMacAddr | read-only | current | The MAC address of the adjacent NE connected to this port in an ETH ring. If the port is not a member of a ring, the value of this parameter will be 00-00-00-0… |
| 1.3.6.1.4.1.164.6.2.15.7 | NodeprtClkSrc | |||
| 1.3.6.1.4.1.164.6.2.15.7.1 | TableprtClkSrcTable | not-accessible | current | A table - Parameters for master and fallback clock source of ports . |
| 1.3.6.1.4.1.164.6.2.15.7.1.1 | RowprtClkSrcEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.6.2.15.7.1.1.1 | ColumnprtClkSrcCnfgIdx | not-accessible | current | This attribute indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.6.2.15.7.1.1.2 | ColumnprtClkSrcPrtIdx | not-accessible | current | This object indicates a unique Port Index (receiving clock). Refer to device specification for port Index |
| 1.3.6.1.4.1.164.6.2.15.7.1.1.3 | ColumnprtClkSrcIdx | not-accessible | current | An index in the table. master - refers Master clock parameters fallback - refers Fallback clock parameters |
| 1.3.6.1.4.1.164.6.2.15.7.1.1.4 | ColumnprtClkSrcMode | read-write | current | This entry indicates the source the nodal timing is locked to. |
| 1.3.6.1.4.1.164.6.2.15.7.1.1.5 | ColumnprtClkSrcPrt | read-write | current | This entry is valid only when working in rxClk mode. It specifies the port from which the clock willl be taken. Refer to device specification for source port I… |
| 1.3.6.1.4.1.164.6.2.15.8 | NodeopticalPort | |||
| 1.3.6.1.4.1.164.6.2.15.8.1 | TableoptPrtMonitorTable | not-accessible | current | A table - optical port (e.g SFP) monitoring parameters, according to SFF-8472 Specification for Diagnostic Monitoring Interface for Optical Xcvrs. and ITU-T re… |
| 1.3.6.1.4.1.164.6.2.15.8.1.1 | RowoptPrtMonitorEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.6.2.15.8.1.1.1 | ColumnoptPrtMonitorPrtIdx | not-accessible | current | This object indicates a unique (optical) Port Index . Refer to device specification for port Index. |
| 1.3.6.1.4.1.164.6.2.15.8.1.1.2 | ColumnoptPrtMonitorSample | not-accessible | current | This index indicates historic and current values - minimum, maximum and actual (current) value. |
| 1.3.6.1.4.1.164.6.2.15.8.1.1.3 | ColumnoptPrtMonitorTxPower | read-only | current | Transmitted optical power level. Value is given in units of hundredth (1/100) of dBm. |
| 1.3.6.1.4.1.164.6.2.15.8.1.1.4 | ColumnoptPrtMonitorLaserBias | read-only | current | LASER bias current level. Value is given in units of microAmper (uA). |
| 1.3.6.1.4.1.164.6.2.15.8.1.1.5 | ColumnoptPrtMonitorLaserTemp | read-only | current | LASER temperature level, in hundredth (1/100) (C) degrees. |
| 1.3.6.1.4.1.164.6.2.15.8.1.1.6 | ColumnoptPrtMonitorRxPower | read-only | current | Received optical power in units of hundredth (1/100) of dBm. |
| 1.3.6.1.4.1.164.6.2.15.8.1.1.7 | ColumnoptPrtMonitorSupplyVoltage | read-only | current | Supply voltage, in hundredth (1/100) of volts (V). |
| 1.3.6.1.4.1.164.6.2.15.8.2 | TableoptPrtCnfgTable | not-accessible | current | A table - optical port configuration |
| 1.3.6.1.4.1.164.6.2.15.8.2.1 | RowoptPrtCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.6.2.15.8.2.1.1 | ColumnoptPrtCnfgIdx | not-accessible | current | This attribute indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg.x. |
| 1.3.6.1.4.1.164.6.2.15.8.2.1.2 | ColumnoptPrtCnfgPrtIdx | not-accessible | current | This object indicates a unique (optical) Port Index . Refer to device specification for port Index. |
| 1.3.6.1.4.1.164.6.2.15.8.2.1.3 | ColumnoptPrtCnfgALS | read-write | current | enable/disable Automatic Laser Shutdown |
| 1.3.6.1.4.1.164.6.2.16 | ScalarsystemResetAllStatsCmd | read-write | current | Reset statistics of all ports and connections of the device. |
| 1.3.6.1.4.1.164.6.2.17 | ScalarsystemClearTablesCmd | read-write | current | tempCnfgTables - Set *RowStatus = destroy for all entries of some tables having *RowStatus object, for temporary configuration only! (255). For the relevant ta… |
| 1.3.6.1.4.1.164.6.2.18 | ScalarsystemParameter | read-write | current | This parameter can be used for different purposes: - TELNET session time-out in seconds. - Ace20: when trying to create row in a table that already has row wit… |
| 1.3.6.1.4.1.164.6.2.19 | ScalaragnGlobalAlarmMask | read-write | current | The value of this attribute determines the alarm traps the agent should mask and not send to the managers. Each bit from a certain octet represents a certain a… |
| 1.3.6.1.4.1.164.6.2.20 | ScalaralarmSeverity | read-only | current | This object specifies the severity of the alarms. |
| 1.3.6.1.4.1.164.6.2.21 | ScalaralarmState | read-only | current | . |
| 1.3.6.1.4.1.164.6.2.22 | ScalaragnTestStatus | read-only | current | Indicates the current test status (for all levels: system, card, port). This attribute will be set to: on(3): when there is at least one test in progress on th… |
| 1.3.6.1.4.1.164.6.2.23 | ScalarsystemSaveAndResetAllStatsCmd | read-write | current | on - a command to Save data of Current Period in Last Period data-set and start a new counting period for Current Period. off - agent will automatically change… |
| 1.3.6.1.4.1.164.6.2.24 | ScalarsystemDefaultGateway | read-write | current | Default Gateway's IP Address. |
| 1.3.6.1.4.1.164.6.2.25 | TablesystemPsTable | not-accessible | current | This table describes the PS types of a device. Usage of this table is specified in the device's NMS SRS |
| 1.3.6.1.4.1.164.6.2.25.1 | RowsystemPsEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.6.2.25.1.1 | ColumnsystemPsIndex1 | read-only | current | First Index. In HUBs: 1 = PS-A slot 2 = PS-B slot 3 = PS-C slot. In SA units: 1 = PS1 2 = PS2 Default = 1 |
| 1.3.6.1.4.1.164.6.2.25.1.2 | ColumnsystemPsIndex2 | read-only | current | Second Index. In HUBs: 1 always. In SA units: 1 = Local 2 = Remote Default = 1. |
| 1.3.6.1.4.1.164.6.2.25.1.3 | ColumnsystemPsType | read-only | current | The type of PS, for a stand-alone product. acDc - PS that supports both AC and DC. acPF - Power Feeding (phantom) box that is feeding another box by external A… |
| 1.3.6.1.4.1.164.6.2.25.1.4 | ColumnsystemPsStatus | read-only | current | The Status of the PS unit. |
| 1.3.6.1.4.1.164.6.2.25.1.5 | ColumnsystemPsHotSwap | read-only | current | Is PS unit hot swap or fixed. |
| 1.3.6.1.4.1.164.6.2.26 | ScalaragnFans | read-only | current | This entry specifies the FANs existence and status. Each fan will be represented by 2 bits, where the first bit (right) will specify the existence: (0= Not exi… |
| 1.3.6.1.4.1.164.6.2.27 | ScalaragnSendTrapParameter | read-write | current | This object specifies if the agent will attach a specific parameter to a trap. For ACE2002 the agent will attach or not the openViewSeverity parameter accordin… |
| 1.3.6.1.4.1.164.6.2.28 | ScalaragnSensorsStatus | read-only | current | This entry specifies the Sensors (Temperature sensors or others) existence and status. Each sensor will be represented by 2 bits, where the first bit (right) w… |
| 1.3.6.1.4.1.164.6.2.29 | ScalaragnStationClockCard | read-only | current | This entry specifies the station clock card existence and status. notExist - station clock card (piggy) does not exist. notValid - station clock card exists bu… |
| 1.3.6.1.4.1.164.6.2.30 | ScalarxcIndexNext | read-only | current | This object contains an appropriate value to be used for xcIndex when creating entries in the xcTable. The value 0 indicates that no unassigned entries are ava… |
| 1.3.6.1.4.1.164.6.2.31 | TablexcTable | not-accessible | current | Configuration of system cross-connect entries. The table follows the behavior described in RFC 2515, RFC 1604 regarding the creation deletion and modification … |
| 1.3.6.1.4.1.164.6.2.31.1 | RowxcEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.6.2.31.1.1 | ColumnxcIndex | not-accessible | current | Cross Connect Identifier. |
| 1.3.6.1.4.1.164.6.2.31.1.2 | ColumnxcIfIndex1 | not-accessible | current | The interface Index from the ifTable, which identify one side of the connection. |
| 1.3.6.1.4.1.164.6.2.31.1.3 | ColumnxcVpi | not-accessible | current | The VPI value. |
| 1.3.6.1.4.1.164.6.2.31.1.4 | ColumnxcVci | not-accessible | current | The VCI value. |
| 1.3.6.1.4.1.164.6.2.31.1.5 | ColumnxcIfIndex2 | not-accessible | current | The interface Index from the ifTable, which identifies the other side of the connection. |
| 1.3.6.1.4.1.164.6.2.31.1.6 | ColumnxcRowStatus | read-create | current | This parameter allows NMS to create/delete entries of this table. |
| 1.3.6.1.4.1.164.6.2.31.1.7 | ColumnxcDescr | read-create | current | A textual string containing information about the xc entry. |
| 1.3.6.1.4.1.164.6.2.31.1.8 | ColumnxcAdminStatus | read-create | current | The desired administrative status of this bi-directional cross-connect. |
| 1.3.6.1.4.1.164.6.2.31.1.9 | ColumnxcOperStatus | read-only | current | The operational status of this bi-directional cross-connect. |
| 1.3.6.1.4.1.164.6.2.31.1.10 | ColumnxcAttachedIfType | read-only | current | This object indicates if the specific VCC is already attached to any interface, and indicates the type of the interface. This object's purpose is to ease the c… |
| 1.3.6.1.4.1.164.6.2.31.1.11 | ColumnxcInputPriority | read-create | current | This object is the priority, by which the LAN frames will be internaly sent to the ATM HW. This parameter is applicable if atmNteMdlInputPriorityMechanism=enab… |
| 1.3.6.1.4.1.164.6.2.31.1.12 | ColumnxcBitMapping | read-only | current | This object maps this entry to a bit of an octet string. For ACE2002 this object maps the LAN VCC to the bit of the VLAN Port Lists. If the value is '0' then i… |
| 1.3.6.1.4.1.164.6.2.32 | NodesystemModule | |||
| 1.3.6.1.4.1.164.6.2.32.1 | NodemodlParam | |||
| 1.3.6.1.4.1.164.6.2.32.1.1 | TablemodlParamTable | not-accessible | current | This table include parameters for system modules. |
| 1.3.6.1.4.1.164.6.2.32.1.1.1 | RowmodlParamEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.6.2.32.1.1.1.1 | ColumnmodlParamIndex | read-only | current | The module index. The index can be the slot number or any other module index as described in the specifications of the device. For Vmux-2100 device, the index … |
| 1.3.6.1.4.1.164.6.2.32.1.1.1.2 | ColumnmodlParamReset | read-write | current | Reset action to be performed on the module. Set the parameter will be done always to on(3) or factory (4). After performing the Reset operation, Agent will aut… |
| 1.3.6.1.4.1.164.6.2.32.1.1.1.3 | ColumnmodlParamSwdlStatus | read-only | current | This parameter indicates whatever the swdl is in process or not. |
| 1.3.6.1.4.1.164.6.2.32.1.1.1.4 | ColumnmodlParamLeds | read-only | current | This entry specifies the LEDs status of the module. Each led is represented by 4 bits where the first 2 bits (left) specify the status : (00=NA, 01=OFF, 10=ON,… |
| 1.3.6.1.4.1.164.6.2.32.1.1.1.5 | ColumnmodlParamType | read-only | current | This attribute indicates the Module Type. |
| 1.3.6.1.4.1.164.6.2.32.1.1.1.6 | ColumnmodlParamSwVer | read-only | current | This attribute indicates the Module's Software Version. |
| 1.3.6.1.4.1.164.6.2.33 | ScalaragnNearFarConnection | read-only | current | This parameter describes the connection between near-end and far-end agents. |
| 1.3.6.1.4.1.164.6.2.34 | NodeagnAccess | |||
| 1.3.6.1.4.1.164.6.2.34.1 | ScalaragnTelnetAccess | read-write | current | Enable/Disable accessing the device via Telnet. disable - no one will be allowed to access the device via Telnet. enable - all users are allowed Telnet Access.… |
| 1.3.6.1.4.1.164.6.2.34.2 | ScalaragnWebAccess | read-write | current | Enable/Disable accessing the device via Web. disable - no one will be allowed to access the device via Web. enable - all users are allowed Web Access. managers… |
| 1.3.6.1.4.1.164.6.2.34.3 | ScalaragnRadiusAccess | read-write | current | Enable/Disable authentication via RADIUS server. |
| 1.3.6.1.4.1.164.6.2.34.4 | ScalaragnSshAccess | read-write | current | Enable/Disable accessing the device via SSH. disable - no one will be allowed to access the device via SSH. enable - all users are allowed SSH Access. managers… |
| 1.3.6.1.4.1.164.6.2.35 | NodesystemInterface | |||
| 1.3.6.1.4.1.164.6.2.35.1 | TableifCreateTable | not-accessible | current | The Interface Configuration Table. This table enables to create interfaces of Entities. |
| 1.3.6.1.4.1.164.6.2.35.1.1 | RowifCreateEntry | not-accessible | current | An entry in the Interface Configuration table. |
| 1.3.6.1.4.1.164.6.2.35.1.1.1 | ColumnifCreateEntityType | read-only | current | This object indicates the Type of the Entity that exists above the created interface. For a Logical Port, this value can be: other (1) when there is no fixed e… |
| 1.3.6.1.4.1.164.6.2.35.1.1.2 | ColumnifCreateEntityIdx | read-only | current | This object indicates the Index of the Entity that exists above the created interface. For a Logical Port, this value can be: 9999 - N/A when there is no fixed… |
| 1.3.6.1.4.1.164.6.2.35.1.1.3 | ColumnifCreateNumber | read-only | current | This object indicates the number of the Interface that is created. |
| 1.3.6.1.4.1.164.6.2.35.1.1.4 | ColumnifCreateRowStatus | read-create | current | This object enables the user to create/delete entries in this table. |
| 1.3.6.1.4.1.164.6.2.35.1.1.5 | ColumnifCreateType | read-create | current | This object indicates the Type of the Interface that is created. |
| 1.3.6.1.4.1.164.6.2.35.1.1.6 | ColumnifCreateIndex | read-only | current | This object indicates the ifIndex of the created Interface. The ifIndex is assigned by the device. |
| 1.3.6.1.4.1.164.6.2.35.1.1.7 | ColumnifCreateConnectedTo | read-create | current | This object indicates the entity connected to the created Interface. The value of this object can be ifIndex of the connected entity or any other number that c… |
| 1.3.6.1.4.1.164.6.2.35.1.1.8 | ColumnifCreateParams | read-create | current | This object represents one or more parameters of the created Interface. Each group of bits (one or more bits) represents a specific parameter and its possible … |
| 1.3.6.1.4.1.164.6.2.35.1.1.9 | ColumnifCreateConnectionPointer | read-create | current | This parameter represents the entity that is connected to this Interface. It can be used instead of ifCreateConnectedTo. It is an OBJECT IDENTIFIER. This param… |
| 1.3.6.1.4.1.164.6.2.35.2 | NodeinterfacePerformance | |||
| 1.3.6.1.4.1.164.6.2.35.2.1 | TableifPerfTable | not-accessible | current | Interface Performance Table. The propose of this table is to support statistics counters having 64 bit by using 2 parameters with syntax= Integer32. This is be… |
| 1.3.6.1.4.1.164.6.2.35.2.1.1 | RowifPerfEntry | not-accessible | current | An entry in the Interface Performance Table. |
| 1.3.6.1.4.1.164.6.2.35.2.1.1.1 | ColumnifPerfCounterType | not-accessible | current | 2nd index of the ifPerfTable. This parameter represents the Counter Type. Each application can have a different association between this object's value and cou… |
| 1.3.6.1.4.1.164.6.2.35.2.1.1.2 | ColumnifPerfLowCounterPart | read-only | current | In order to support Counters having 64 bit length, the performance counter is divided into two 32 bit parameters as follows: [ 64 bit parameter ] = [ High 32 b… |
| 1.3.6.1.4.1.164.6.2.35.2.1.1.3 | ColumnifPerfHighCounterPart | read-only | current | This parameter holds the High 32 bits of the counter (see description in the above parameter). |
| 1.3.6.1.4.1.164.6.2.35.2.1.1.4 | ColumnifPerfHCCounter | read-only | current | This High Capacity counter holds whole 64 bits of the counter indicated by ifPerfCounterType (concatenates both counter parts ifPerfHighCounterPart&ifPerfLowCo… |
| 1.3.6.1.4.1.164.6.2.36 | NodesystemOam | |||
| 1.3.6.1.4.1.164.6.2.36.1 | TablesystemOamTable | not-accessible | current | The OAM Configuration Table. |
| 1.3.6.1.4.1.164.6.2.36.1.1 | RowsystemOamEntry | not-accessible | current | An entry in the OAM table. |
| 1.3.6.1.4.1.164.6.2.36.1.1.1 | ColumnsystemOamCnfgIdx | not-accessible | current | This attribute indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.6.2.36.1.1.2 | ColumnsystemOamFrequency | read-write | current | Time in sec. between 2 OAM packets. |
| 1.3.6.1.4.1.164.6.2.36.1.1.3 | ColumnsystemOamTimeoutCycles | read-write | current | No. of cycles the agent will send OAM packets without receiving a response from the remote device before declaring that the connection to the remote side is do… |
| 1.3.6.1.4.1.164.6.2.36.1.1.4 | ColumnsystemOamLinkCheck | read-write | current | This MIB object determines whether continuous connectivity Link checks will be performed by the device for uplinks. For Vmux-2100: enable (3) value can be set … |
| 1.3.6.1.4.1.164.6.2.36.2 | TablesystemOamDescrTable | not-accessible | current | The OAM Descriptors Configuration Table. |
| 1.3.6.1.4.1.164.6.2.36.2.1 | RowsystemOamDescrEntry | not-accessible | current | An entry in the OAM table. |
| 1.3.6.1.4.1.164.6.2.36.2.1.1 | ColumnsystemOamDescrIdx | not-accessible | current | The OAM Descriptor Index. |
| 1.3.6.1.4.1.164.6.2.36.2.1.2 | ColumnsystemOamDescrRowStatus | read-create | current | Enables the user to create/delete entries in this table. |
| 1.3.6.1.4.1.164.6.2.36.2.1.3 | ColumnsystemOamDescrMode | read-create | current | The OAM Mode of the Descriptor. |
| 1.3.6.1.4.1.164.6.2.36.2.1.4 | ColumnsystemOamDescrCCDirection | read-create | current | OAM Continuity Check function mode. both(2) - Agent sends OAM CC cells and checks received OAM CC cells. none(3) - Agent does not send and does not check recei… |
| 1.3.6.1.4.1.164.6.2.36.2.1.5 | ColumnsystemOamDescrLoopbackOperation | read-create | current | The OAM Loopback function mode. off(2) - Stop sending loopback OAM cells. on(3) - Start loopback OAM cells. |
| 1.3.6.1.4.1.164.6.2.36.2.1.6 | ColumnsystemOamDescrLoopbackDestAddr | read-create | current | Loopback Destination Address. |
| 1.3.6.1.4.1.164.6.2.36.2.1.7 | ColumnsystemOamDescrXcCounter | read-only | current | The number of connections that use this OAM Descriptor. |
| 1.3.6.1.4.1.164.6.2.37 | ScalaragnDeviceView | read-only | current | This variable denotes the view of the device: Look: old look, new look or new look 2. Material: Plastic or Metal. |
| 1.3.6.1.4.1.164.6.2.38 | TablebitMappingTable | not-accessible | current | This table maps bits of an octet string to an interface. For ACE-2002 this table is used to map bits of VLAN port lists to LAN VCC's. This table is the opposit… |
| 1.3.6.1.4.1.164.6.2.38.1 | RowbitMappingEntry | not-accessible | current | Each entry in the table describes a correlation of a bit location to an interface. For ACE-2002 - Upon creation of a new LAN VCC the agent will add an entry to… |
| 1.3.6.1.4.1.164.6.2.38.1.1 | ColumnbitMappingLocation | not-accessible | current | The bit location in an octet string. |
| 1.3.6.1.4.1.164.6.2.38.1.2 | ColumnbitMappingIndex | read-only | current | The interface index or any other index that should be mapped. |
| 1.3.6.1.4.1.164.6.2.39 | ScalarbitMappingView | read-only | current | A view of the bitMappingTable in one object - each entry in the biMappingTable will have the corresponding Bit of this object (bitMappingLocation) = '1'. For A… |
| 1.3.6.1.4.1.164.6.2.40 | TablehostTable | not-accessible | current | Host interface table. |
| 1.3.6.1.4.1.164.6.2.40.1 | RowhostEntry | not-accessible | current | An entry in the Host Table. The hostParam1, hostParam2, and hostParam3 entries may have different use in different applications. |
| 1.3.6.1.4.1.164.6.2.40.1.1 | ColumnhostIndex | not-accessible | current | The Host Table Index. This index can have the same value as Host No. |
| 1.3.6.1.4.1.164.6.2.40.1.2 | ColumnhostIP | read-create | current | The host interface IP address. |
| 1.3.6.1.4.1.164.6.2.40.1.3 | ColumnhostIPMask | read-create | current | The host interface subnet mask. |
| 1.3.6.1.4.1.164.6.2.40.1.4 | ColumnhostDefaultNextHop | read-create | current | The host interface Default Next Hop address. |
| 1.3.6.1.4.1.164.6.2.40.1.5 | ColumnhostMode | read-create | current | This parameter represents the Host mode of operation. There can be different values for each application. For example: Not Applicable = 1. |
| 1.3.6.1.4.1.164.6.2.40.1.6 | ColumnhostParam1 | read-create | current | This parameter represents the first Host parameter. There can be different values for each application. For example: Not Applicable = 1. |
| 1.3.6.1.4.1.164.6.2.40.1.7 | ColumnhostParam2 | read-create | current | This parameter represents the 2nd Host parameter. There can be different values for each application. |
| 1.3.6.1.4.1.164.6.2.40.1.8 | ColumnhostParam3 | read-create | current | This parameter represents the 3nd Host parameter. There can be different values for each application. |
| 1.3.6.1.4.1.164.6.2.40.1.9 | ColumnhostRowStatus | read-create | current | Creation/Deletion of rows in the table. |
| 1.3.6.1.4.1.164.6.2.40.1.10 | ColumnhostVlanTagging | read-create | current | Host VLAN support (Tagging). untag - No support of VLAN Tagging. tag - 4 VLAN bytes will be added to the frame. |
| 1.3.6.1.4.1.164.6.2.40.1.11 | ColumnhostVlanId | read-create | current | Host VLAN ID. |
| 1.3.6.1.4.1.164.6.2.40.1.12 | ColumnhostVlanPriority | read-create | current | Host VLAN Frame priority. |
| 1.3.6.1.4.1.164.6.2.41 | TableinvNameXCTable | not-accessible | current | Inverse Name XC Table. This table can be used to ease the search for a connection first index by the connection name. |
| 1.3.6.1.4.1.164.6.2.41.1 | RowinvNameXCEntry | not-accessible | current | An entry in the table. |
| 1.3.6.1.4.1.164.6.2.41.1.1 | ColumninvNameXC | not-accessible | current | The unique Connection name, associated to a Cross-Connection. |
| 1.3.6.1.4.1.164.6.2.41.1.2 | ColumninvNameXCType | read-only | current | The OBJECT IDENTIFIER of the respective XC Table. Examples: XC Table invNameXCType atmVpCrossConnectTable 1.3.6.1.2.1.37.1.9 atmVcCrossConnectTable 1.3.6.1.2.1… |
| 1.3.6.1.4.1.164.6.2.41.1.3 | ColumninvNameXCIndex | read-only | current | The XC Table (invNameXCType) may include more than one index. This object represents the value of the first XC Index. |
| 1.3.6.1.4.1.164.6.2.42 | ScalaragnDeviceCapabilities | read-only | current | Indicates the optional capabilities that are implemented by this device and are manageable through this MIB. For each capability 1 BIT is allocated in each Oct… |
| 1.3.6.1.4.1.164.6.2.43 | TablerowInfoTable | not-accessible | current | This table holds information of other tables. |
| 1.3.6.1.4.1.164.6.2.43.1 | RowrowInfoEntry | not-accessible | current | An entry in the table. |
| 1.3.6.1.4.1.164.6.2.43.1.1 | ColumnrowInfoTableId | not-accessible | current | The OBJECT IDENTIFIER of the Table, which its information is held by this table (rowInfoTable). Examples: Table Name rowInfoTableId atmTrafficDescrParamTable 1… |
| 1.3.6.1.4.1.164.6.2.43.1.2 | ColumnrowInfoCounter | read-only | current | The Number of rows in the table, indicated by rowInfoTableId. |
| 1.3.6.1.4.1.164.6.2.43.1.3 | ColumnrowInfoIndexNext | read-only | current | The First Free Index of the table, indicated by rowInfoTableId. |
| 1.3.6.1.4.1.164.6.2.43.1.4 | ColumnrowInfoMaxNoOfRows | read-only | current | The maximum possible number of rows in the table, indicated by rowInfoTableId. |
| 1.3.6.1.4.1.164.6.2.44 | ScalaragnStoreCmd | read-write | current | Store command. inFlash(3) = store the current Agent configuration in Flash memory. asDefConfigFile(4) = store the current Agent configuration as Default Config… |
| 1.3.6.1.4.1.164.6.2.45 | TableagnFunctionTable | not-accessible | current | This table is used in order to activate/deactivate device functions. The index indicates the function. Each function can be Enabled or Disabled. |
| 1.3.6.1.4.1.164.6.2.45.1 | RowagnFunctionEntry | not-accessible | current | An entry in the table. |
| 1.3.6.1.4.1.164.6.2.45.1.1 | ColumnagnFunction | not-accessible | current | This MIB object indicates the function that will be enabled or disabled in the device. alarmForwarding= Fault Propagation (usually towards user port). For Vmux… |
| 1.3.6.1.4.1.164.6.2.45.1.2 | ColumnagnFunctionActivation | read-write | current | This MIB object indicates the activation of the current function. |
| 1.3.6.1.4.1.164.6.2.46 | ScalaragnManagerConfigPorts | read-write | current | This variable defines from which port/s this manager can manage the device. The value is a sum of 2**n, where n is a bit assigned to a certain port. For RIC-E1… |
| 1.3.6.1.4.1.164.6.2.47 | ScalaragnEgressRateRange | read-write | current | This variable defines the valid ranges of egress rate. For example, for ETX 102: range 1 (2)= 128KBPS - 8MBPS, range 2 (3)= 256KBPS - 16MBPS, range 3 (4)= 512K… |
| 1.3.6.1.4.1.164.6.2.48 | ScalaragnNoOfCurrentConns | read-only | current | This variable indicates the number of connections currently configured for the agent. |
| 1.3.6.1.4.1.164.6.2.49 | ScalaragnIngressRateRange | read-write | current | This variable defines the valid ranges of ingress rate. For example, for ETX 102: range 1 (2)= 128KBPS - 8MBPS, range 2 (3)= 256KBPS - 16MBPS, range 3 (4)= 512… |
| 1.3.6.1.4.1.164.6.2.50 | TablealarmForwardingTable | not-accessible | current | The Alarm Forwarding Mechanism will be operated for this table entries. |
| 1.3.6.1.4.1.164.6.2.50.1 | RowalarmForwardingEntry | not-accessible | current | Each entry in this table is a pair of ports that the Alarm Forwarding Mechanism is determined for. |
| 1.3.6.1.4.1.164.6.2.50.1.1 | ColumnalarmForwardingFailPort | not-accessible | current | An Index of the port on which a fail occurs. |
| 1.3.6.1.4.1.164.6.2.50.1.2 | ColumnalarmForwardingToPort | not-accessible | current | An Index of the port that will be affected upon the failure of the alarmForwardingFailPort. |
| 1.3.6.1.4.1.164.6.2.50.1.3 | ColumnalarmForwardingRowStatus | read-create | current | Creation/ Deletion of rows in the table. |
| 1.3.6.1.4.1.164.6.2.50.1.4 | ColumnalarmForwardingRecoveryTime | read-create | current | This parameter defines the maximum time (sec) the affected port will hold the down state. |
| 1.3.6.1.4.1.164.6.2.50.1.5 | ColumnalarmForwardingGroupConditions | read-create | current | This parameter is applicable when there is a group of interfaces in which a fault may occur, and one interface to which alarm is propagated (forwarded). 0 = Al… |
| 1.3.6.1.4.1.164.6.2.50.1.6 | ColumnalarmForwardingCause | read-create | current | Bit map representing the cause upon which alarm forwarding will take place. bit 0 - LOSS (LINE DOWN) bit 1 - AIS bit 2 - RDI bit 3 - PROTOCOL DOWN. bit 4 - OAM… |
| 1.3.6.1.4.1.164.6.2.50.1.7 | ColumnalarmForwardingRecoveryMode | read-create | current | This parameter determines the Recovery Mode. manual - The user should stop the alarm forwarding by using the alarmForwardingRecoveryCommand. automatic - Alarm … |
| 1.3.6.1.4.1.164.6.2.50.1.8 | ColumnalarmForwardingRecoveryCommand | read-create | current | This parameter is a command. It is applicable when alarmForwardingRecoveryMode = manual. on - Will stop alarm forwarding. After setting to 'On', the agent will… |
| 1.3.6.1.4.1.164.6.2.50.1.9 | ColumnalarmForwardingDelay | read-create | current | This parameter determines the period of time (in seconds) the alarm of the alarmForwardingFailPort should exist before starting alarm forwarding. |
| 1.3.6.1.4.1.164.6.2.50.1.10 | ColumnalarmForwardingDirection | read-create | current | This parameter determines the Direction of the Alarm Forwarding. unidirectional - alarmForwardingFailPort affects the alarmForwardingToPort. bidirectional - al… |
| 1.3.6.1.4.1.164.6.2.50.1.11 | ColumnalarmForwardingAction | read-create | current | Bit map representing the action to be performed when alarm forwarding will take place. bit 0 - No Action. '1' value - device should NOT perform any action, tho… |
| 1.3.6.1.4.1.164.6.2.51 | ScalaragnSwVersionSwapCmd | read-write | current | SW switch command. mainAndBackup (3) = Swap between Main SW and the backup one. Agent will perform the required command and change automatically the value of t… |
| 1.3.6.1.4.1.164.6.2.52 | NodeagnClockSource | |||
| 1.3.6.1.4.1.164.6.2.52.1 | TableagnClkSrcPortTable | not-accessible | current | Pool of Ports for the Master/Fallback Clock Source and of Recovered IDs. For devices with more than one configuration: Set operation is valid only to the TmpCn… |
| 1.3.6.1.4.1.164.6.2.52.1.1 | RowagnClkSrcPortEntry | not-accessible | current | An entry in the table. |
| 1.3.6.1.4.1.164.6.2.52.1.1.1 | ColumnagnClkSrcPortCnfgIdx | not-accessible | current | This object indicates the Idx of the Cnfg being accessed ; Idx of 255 relates to the TmpCnfg. For product supporting a single configuration, the value will be … |
| 1.3.6.1.4.1.164.6.2.52.1.1.2 | ColumnagnClkSrcPortSrcIdx | not-accessible | current | Clock Source Index. master - refers to Master clock fallback - refers to Fallback clock recovered - refers to Recovered clock. |
| 1.3.6.1.4.1.164.6.2.52.1.1.3 | ColumnagnClkSrcPortIdx | not-accessible | current | This object indicates the running Idx of the Port/Recovered ID that is to be used as Clock Source, for each agnClkSrcPortSrcIdx instance. |
| 1.3.6.1.4.1.164.6.2.52.1.1.4 | ColumnagnClkSrcPort | read-create | current | This object indicates the Port/Interface/Recovered ID # that is to be used as Clock Source. In case of agnClkSrcPortSrcIdx=recovered (3) - it indicates the PW … |
| 1.3.6.1.4.1.164.6.2.52.1.1.5 | ColumnagnClkSrcPortRowStatus | read-create | current | This object enables Creation/ Deletion of rows in the table. |
| 1.3.6.1.4.1.164.6.2.52.1.1.6 | ColumnagnClkSrcPortAdminStatus | read-create | current | This object indicates the Recovered Clock Administrative Status. |
| 1.3.6.1.4.1.164.6.2.52.1.1.7 | ColumnagnClkSrcPortType | read-create | current | This object is relevant only in case of Recovery Clock. It indicates the Clock Type. |
| 1.3.6.1.4.1.164.6.2.52.1.1.8 | ColumnagnClkSrcPortQuality | read-create | current | This object indicates the Clock Source Quality. |
| 1.3.6.1.4.1.164.6.2.52.1.1.9 | ColumnagnClkSrcPortNetType | read-create | current | This object is relevant only in case of Recovery Clock. It indicates the Clock Network Type, i.e. the PSN network characteristics and behavior. |
| 1.3.6.1.4.1.164.6.2.52.1.1.10 | ColumnagnClkSrcPortState | read-only | current | This object indicates the Clock State. freeRun(1) - Clock recovery is not locked to any clock. frequencyAcquisition(2) - Adaptive clock recovery is learning th… |
| 1.3.6.1.4.1.164.6.2.52.1.1.11 | ColumnagnClkSrcPortSrcType | read-create | current | This object indicates the Src Type of each entry in the list of source instances, when agnClkSrcPortSrcIdx=master(1)or fallback(2). According to this type, agn… |
| 1.3.6.1.4.1.164.6.2.52.2 | TableagnCurrClkTable | not-accessible | current | Current Clock Source. |
| 1.3.6.1.4.1.164.6.2.52.2.1 | RowagnCurrClkEntry | not-accessible | current | An entry in the table. |
| 1.3.6.1.4.1.164.6.2.52.2.1.1 | ColumnagnCurrClkObjIdx | not-accessible | current | This MIB object identifies the object for which the Clock Source is used (System, Other System, Card). |
| 1.3.6.1.4.1.164.6.2.52.2.1.2 | ColumnagnCurrClkMode | read-only | current | Current Clock Source Mode. master - refers Master clock fallback - refers Fallback clock internal - only when both Master and Fallback Sources failed |
| 1.3.6.1.4.1.164.6.2.52.2.1.3 | ColumnagnCurrClkSrc | read-only | current | This object indicates the Current Clock Source. |
| 1.3.6.1.4.1.164.6.2.52.2.1.4 | ColumnagnCurrClkPort | read-only | current | This object indicates the Port/Interface/Recovered ID that is Currently used as Clock Source. - When agnCurrClkSrc=rxClock(3), this object indicates a Port ind… |
| 1.3.6.1.4.1.164.6.2.52.2.1.5 | ColumnagnCurrClkHoldover | read-only | current | Current Clock Holdover State. As a last resort, in the absence of higher quality timing: - a SONET/SDH object can enter 'holdover' state, until higher quality … |
| 1.3.6.1.4.1.164.6.2.52.2.1.6 | ColumnagnCurrClkSsmBased | read-only | current | This parameter indicates whether clock source is selected based on receive clock quality. Clock quality is indicated in S1 byte inside SONET/SDH overhead, (enc… |
| 1.3.6.1.4.1.164.6.2.52.2.1.7 | ColumnagnCurrClkState | read-only | current | This object indicates the Current Clock State. freeRun(1) - Current clock state machine is not locked and run from the internal oscillator. rapidPhaseLock(2) -… |
| 1.3.6.1.4.1.164.6.2.52.2.1.8 | ColumnagnCurrClkQualification | read-only | current | This object indicates the Current Clock Qualification and defines whether the PLL can locked according to the stratum definitions. |
| 1.3.6.1.4.1.164.6.2.52.3 | NodeagnClockMonitoring | |||
| 1.3.6.1.4.1.164.6.2.52.3.1 | TableagnClkCurrentTable | not-accessible | current | The Clock Current table. |
| 1.3.6.1.4.1.164.6.2.52.3.1.1 | RowagnClkCurrentEntry | not-accessible | current | An entry in the Clock Current table. |
| 1.3.6.1.4.1.164.6.2.52.3.1.1.1 | ColumnagnClkCurrentIndex | not-accessible | current | An Index that is uniquely represents the Clock. |
| 1.3.6.1.4.1.164.6.2.52.3.1.1.2 | ColumnagnClkCurrentRxPackets | read-only | current | The counter associated with the number of Received Packets, encountered by a Bridge Port in the current 15 minute interval. |
| 1.3.6.1.4.1.164.6.2.52.3.1.1.3 | ColumnagnClkCurrentLostPackets | read-only | current | The counter associated with the number of Lost Packets, encountered by a Bridge Port in the current 15 minute interval. |
| 1.3.6.1.4.1.164.6.2.52.3.1.1.4 | ColumnagnClkCurrentOutOfOrderPackets | read-only | current | The counter associated with the number of times Out-of-Order Packets encountered by a Bridge Port in the current 15 minute interval. |
| 1.3.6.1.4.1.164.6.2.52.3.1.1.5 | ColumnagnClkCurrentBufferUnderflow | read-only | current | The counter associated with the number of times Underflow event encountered by a Bridge Port in the current 15 minute interval. |
| 1.3.6.1.4.1.164.6.2.52.3.2 | TableagnClkIntervalTable | not-accessible | current | The Clock Interval table. |
| 1.3.6.1.4.1.164.6.2.52.3.2.1 | RowagnClkIntervalEntry | not-accessible | current | An entry in the Clock Interval table. |
| 1.3.6.1.4.1.164.6.2.52.3.2.1.1 | ColumnagnClkIntervalIndex | not-accessible | current | An Index that is uniquely represents the Clock. |
| 1.3.6.1.4.1.164.6.2.52.3.2.1.2 | ColumnagnClkIntervalNumber | not-accessible | current | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that … |
| 1.3.6.1.4.1.164.6.2.52.3.2.1.3 | ColumnagnClkIntervalRxPackets | read-only | current | The counter associated with the number of Received Packets, encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.6.2.52.3.2.1.4 | ColumnagnClkIntervalLostPackets | read-only | current | The counter associated with the number of Lost Packets, encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.6.2.52.3.2.1.5 | ColumnagnClkIntervalOutOfOrderPackets | read-only | current | The counter associated with the number of times Out-of-Order Packets are detected, encountered by a Bridge Port in one of the previous 96, individual 15 minute… |
| 1.3.6.1.4.1.164.6.2.52.3.2.1.6 | ColumnagnClkIntervalBufferUnderflow | read-only | current | The counter associated with the number of times Underflow event is detected, encountered by a Bridge Port in one of the previous 96, individual 15 minute, inte… |
| 1.3.6.1.4.1.164.6.2.53 | ScalaragnMaxNoOfConns | read-only | current | This variable indicates the maximum number of connections that can be configured for the agent. |
| 1.3.6.1.4.1.164.6.2.54 | Nodelag | |||
| 1.3.6.1.4.1.164.6.2.54.1 | TablelagTable | not-accessible | current | A table defining Link Aggregation Groups port association, and other parameters. |
| 1.3.6.1.4.1.164.6.2.54.1.1 | RowlagEntry | not-accessible | current | An entry in the LAG table. |
| 1.3.6.1.4.1.164.6.2.54.1.1.1 | ColumnlagCnfgIdx | not-accessible | current | This object indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.6.2.54.1.1.2 | ColumnlagIdx | not-accessible | current | This object indicates LAG unique index. |
| 1.3.6.1.4.1.164.6.2.54.1.1.3 | ColumnlagPortMembers | read-create | current | The set of ports which are permanently assigned to the Link Aggregation Group. The default value of this object is a string of zeros. |
| 1.3.6.1.4.1.164.6.2.54.1.1.4 | ColumnlagDistributionMethod | read-create | current | This object defines the criteria for the 802.3ad (LAG) to split the traffic between ports |
| 1.3.6.1.4.1.164.6.2.54.1.1.5 | ColumnlagRecoveryMode | read-create | current | This object defines whether traffic will be returned to a port after its recovery. This object is applicable only when lagDistributionMethod= oneToOne (3). |
| 1.3.6.1.4.1.164.6.2.54.1.1.6 | ColumnlagWaitToRestore | read-create | current | This object defines traffic recovery time (in seconds) to the port after its recovery. This object is applicable only when lagRecoveryMode= revertive (3). |
| 1.3.6.1.4.1.164.6.2.54.1.1.7 | ColumnlagRowStatus | read-create | current | This object enables user to create/delete entries of this table. Note: When using LAG standard package, this table is static, hence, only the values active(1),… |
| 1.3.6.1.4.1.164.6.2.54.1.1.8 | ColumnlagShutDownDurationUponFlip | read-create | current | This object defines the duration (in seconds) the active port transmission is shut down after LAG Flip occurs. The transmission is shut down and then opened ag… |
| 1.3.6.1.4.1.164.6.2.54.1.1.9 | ColumnlagRdnMethod | read-create | current | This object defines the redundancy method. |
| 1.3.6.1.4.1.164.6.2.54.1.1.10 | ColumnlagLacpEnable | read-create | current | Enabling/Disabling the LACP for a LAG. The LACP will be enabled for all ports belonging to this LAG. |
| 1.3.6.1.4.1.164.6.2.54.2 | TablelagStatTable | not-accessible | current | A table defining Link Aggregation Groups Redundancy. This table is applicable only when lagDistributionMethod = oneToOne. |
| 1.3.6.1.4.1.164.6.2.54.2.1 | RowlagStatEntry | not-accessible | current | An entry in the LAG Status table. |
| 1.3.6.1.4.1.164.6.2.54.2.1.1 | ColumnlagStatForcePort | read-write | current | This object enables user to enforce the active port. 0 = No Enforcement; Otherwise the ifIndex of the port. |
| 1.3.6.1.4.1.164.6.2.54.2.1.2 | ColumnlagStatActivePort | read-only | current | This object indicates the current active port. It is applicable only when lagDistributionMethod = oneToOne. The value is the ifIndex of the port. 0 = none of t… |
| 1.3.6.1.4.1.164.6.2.55 | Nodegfp | |||
| 1.3.6.1.4.1.164.6.2.55.1 | TablegfpCnfgTable | not-accessible | current | Configuration table for GFP (General Framing Protocol). |
| 1.3.6.1.4.1.164.6.2.55.1.1 | RowgfpCnfgEntry | not-accessible | current | An entry in the GFP configuration table. |
| 1.3.6.1.4.1.164.6.2.55.1.1.1 | ColumngfpCnfgIdx | not-accessible | current | Index to GFP configuration table. |
| 1.3.6.1.4.1.164.6.2.55.1.1.2 | ColumngfpPayloadFcs | read-write | current | This object defines whether protocol header will include FCS. |
| 1.3.6.1.4.1.164.6.2.55.1.1.3 | ColumngfpRxTxScramble | read-write | current | This object defines whether transmission will be scrambled. |
| 1.3.6.1.4.1.164.6.2.55.1.1.4 | ColumngfpVcatHeader | read-write | current | VCAT header is LCAS CONTROL packet as described in the G-7043. one control packet is transmitted in a period of 16 Multi frame |
| 1.3.6.1.4.1.164.6.2.56 | TableagnGroupTable | not-accessible | current | A table that enables associating components to Group/s (or removing components of a group). The Group Idx can then be used in other tables (e.g alarmForwarding… |
| 1.3.6.1.4.1.164.6.2.56.1 | RowagnGroupEntry | not-accessible | current | An entry in the agnGroupTable. |
| 1.3.6.1.4.1.164.6.2.56.1.1 | ColumnagnGroupCnfgIdx | not-accessible | current | This object indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.6.2.56.1.2 | ColumnagnGroupIdx | not-accessible | current | This object indicates a unique Group Index. |
| 1.3.6.1.4.1.164.6.2.56.1.3 | ColumnagnGroupComponentIdx | not-accessible | current | This object indicates a unique Component Index that belongs to the Group defined by agnGroupIdx. |
| 1.3.6.1.4.1.164.6.2.56.1.4 | ColumnagnGroupRowStatus | read-create | current | This object enables user to create/delete entries of this table. destroy - If a Group is used in another table, Agent may not allow destroying the entry/ies th… |
| 1.3.6.1.4.1.164.6.2.57 | ScalaragnStatNoOfUploadedIntervals | read-only | current | This parameter indicates the Number of Intervals that were successfully collected and uploaded in the last statistics collection session. |
| 1.3.6.1.4.1.164.6.2.58 | NodeagnSyslog | |||
| 1.3.6.1.4.1.164.6.2.58.1 | ScalaragnSyslogDeviceUdpPort | read-write | current | The UDP Port of the device, from which Syslog messages are sent. Default=514. |
| 1.3.6.1.4.1.164.6.2.58.2 | ScalaragnSyslogFacility | read-write | current | A user defined SW module, task or function, from which Syslog messages are sent to the remote Server. |
| 1.3.6.1.4.1.164.6.2.58.3 | ScalaragnSyslogSeverityLevel | read-write | current | Device will send events equal or exceeding this severity level (configured by user). |
| 1.3.6.1.4.1.164.6.2.59 | ScalaragnNetworkInterfaceType | read-write | current | This MIB object indicates the network interface type to be used by the device. It is used for devices that use only one network port type. |
| 1.3.6.1.4.1.164.6.2.60 | ScalaragnTrapDelay | read-write | current | This variable enables the user to set a delay (in seconds) before a trap is sent. This delay will be used only for traps that need to be sent during device ini… |
| 1.3.6.1.4.1.164.6.2.61 | NodetrapManagement | |||
| 1.3.6.1.4.1.164.6.2.61.1 | NodetrapMngVars | |||
| 1.3.6.1.4.1.164.6.2.61.1.1 | ScalartrapState | accessible-for-notify | current | State of current trap (sent within a trap). |
| 1.3.6.1.4.1.164.6.2.61.1.2 | ScalartrapSeqId | accessible-for-notify | current | Sequence ID of current trap (sent within a trap). |
| 1.3.6.1.4.1.164.6.2.61.2 | NodealarmSync | |||
| 1.3.6.1.4.1.164.6.2.61.2.0 | NodealarmSyncEvents | |||
| 1.3.6.1.4.1.164.6.2.61.2.0.1 | NotificationhardSyncTrap | current | This trap is sent whenever Hard Synchronization process starts or ends (Hard Synchronization retrieves current status of Agent). | |
| 1.3.6.1.4.1.164.6.2.61.2.1 | TablealarmSyncTable | not-accessible | current | This table includes Alarm Synchronization information for each Logical Group of managers. |
| 1.3.6.1.4.1.164.6.2.61.2.1.1 | RowalarmSyncEntry | not-accessible | current | An entry in the table. |
| 1.3.6.1.4.1.164.6.2.61.2.1.1.1 | ColumnalarmSyncGroupId | not-accessible | current | A unique Logical Group ID, which represents a group of managers. |
| 1.3.6.1.4.1.164.6.2.61.2.1.1.2 | ColumnalarmSyncLastSentSeqId | read-only | current | Last Sequence ID of trap that is sent to this Logical Group of managers. |
| 1.3.6.1.4.1.164.6.2.61.2.1.1.3 | ColumnalarmSyncCmd | read-write | current | Initates an Alarm Synchronization request for this Logical Group of managers. softSync(2) - sends Soft Synchronization request, in order to synchronize missing… |
| 1.3.6.1.4.1.164.6.2.61.2.1.1.4 | ColumnalarmSyncStartSeqId | read-write | current | First Sequence ID of Soft Synchronization request for this Logical Group of managers. Soft Synchronization request is sent for a range of Sequence IDs. This ob… |
| 1.3.6.1.4.1.164.6.2.61.2.1.1.5 | ColumnalarmSyncEndSeqId | read-write | current | Last Sequence ID of Soft Synchronization request for this Logical Group of managers. Soft Synchronization request is sent for a range of Sequence IDs. This obj… |
| 1.3.6.1.4.1.164.6.2.62 | TableagnStringToIndexTable | not-accessible | current | This table holds the conversions of tables from unique String to numeric index. |
| 1.3.6.1.4.1.164.6.2.62.1 | RowagnStringToIndexEntry | not-accessible | current | An entry in the table. |
| 1.3.6.1.4.1.164.6.2.62.1.1 | ColumnagnStringToIndexTableId | not-accessible | current | The OBJECT IDENTIFIER of the Table, having as index numeric values. In this table, the value of agnStringToIndexUserName is an attribute. |
| 1.3.6.1.4.1.164.6.2.62.1.2 | ColumnagnStringToIndexUserName | not-accessible | current | This object indicates a unique name used by agnStringToIndexTableId, although it is not it's index. |
| 1.3.6.1.4.1.164.6.2.62.1.3 | ColumnagnStringToIndexTableIndex | read-only | current | The numeric Index of agnStringToIndexTableId. |
| 1.3.6.1.4.1.164.6.2.63 | TableagnRowPointerTable | not-accessible | current | This table holds information about a specific entry in a table. For example, number of usages of this row. |
| 1.3.6.1.4.1.164.6.2.63.1 | RowagnRowPointerEntry | not-accessible | current | An entry in the table. |
| 1.3.6.1.4.1.164.6.2.63.1.1 | ColumnagnRowPointerIndex | not-accessible | current | The OBJECT IDENTIFIER of an entry in a table. |
| 1.3.6.1.4.1.164.6.2.63.1.2 | ColumnagnRowPointerNoOfUsages | read-only | current | The number of usages of specific entry in a table, which is pointed by agnRowPointerIndex.Usually, when the value of this counter is greater than 0,the entry c… |
| 1.3.6.1.4.1.164.6.2.64 | ScalaragnConfigVersion | read-only | current | ASCII string of the Configuration Version. |
| 1.3.6.1.4.1.164.6.3 | Nodeservices | |||
| 1.3.6.1.4.1.164.6.3.1 | Nodewfq | |||
| 1.3.6.1.4.1.164.6.3.1.1 | TablewfqTable | not-accessible | current | This table allows user to define several WFQ tables per output port. WFQ supports flows with different bandwidth requirements by giving each queue a weight tha… |
| 1.3.6.1.4.1.164.6.3.1.1.1 | RowwfqEntry | not-accessible | current | An entry in the Weighted Fair Queueing table. |
| 1.3.6.1.4.1.164.6.3.1.1.1.1 | ColumnwfqCnfgIdx | not-accessible | current | This object indicates the Idx of the Agent Cnfg the following objects refer. 255=Temporary Cnfg (when relevant, Set is done only to this configuration). For Ag… |
| 1.3.6.1.4.1.164.6.3.1.1.1.2 | ColumnwfqPrtIdx | not-accessible | current | This object indicates a unique port or interface number, for which Weighted Fair Queueing table is applicable . For numbering, see product's spec. For some pro… |
| 1.3.6.1.4.1.164.6.3.1.1.1.3 | ColumnwfqTblIdx | not-accessible | current | This object indicates which Weighted Fair Queueing (WFQ) Table is being used. There can be several tables. For FCD-155 User will select which one will be used … |
| 1.3.6.1.4.1.164.6.3.1.1.1.4 | ColumnwfqQueueIdx | not-accessible | current | This object indicates a queue index. For FCD-155, valid queues are 1..3. The 4th queue is not in MIB. Its weight will be RO, Calculated according to the sum of… |
| 1.3.6.1.4.1.164.6.3.1.1.1.5 | ColumnwfqRowStatus | read-create | current | This object enables Creation/Deletion of rows in the WFQ table. For FCD-155, rows are not created nor destroyed by user. |
| 1.3.6.1.4.1.164.6.3.1.1.1.6 | ColumnwfqWeightValue | read-create | current | This object indicates a relative weight value. User should make sure that the sum of values for all queues will not exceed 100% (sum should be BELOW 100% in or… |
| 1.3.6.1.4.1.164.6.3.1.1.1.7 | ColumnwfqSchedulingMode | read-create | current | This object controls which scheduling mode is used: Weighted Fair Queuing (WFQ) scheme or priority Queue (Strict Priority). |
| 1.3.6.1.4.1.164.6.3.1.1.1.8 | ColumnwfqMinRateAbsolute | read-create | current | The minimum absolute rate, in kbps, that should be allocated to this queue. If the value is zero, then there is effectively no minimum rate guarantee. If the v… |
| 1.3.6.1.4.1.164.6.3.1.1.1.9 | ColumnwfqMaxPacketSize | read-create | current | The size of the largest packet which can be received on this queue, specified in octets. Packets larger than this size will be discarded. |
| 1.3.6.1.4.1.164.6.3.2 | NodedscpMapping | |||
| 1.3.6.1.4.1.164.6.3.2.1 | TabledscpMappingTable | not-accessible | current | Mapping of DSCP value to a regenerated priority level. |
| 1.3.6.1.4.1.164.6.3.2.1.1 | RowdscpMappingEntry | not-accessible | current | An entry in dscpMappingTable. |
| 1.3.6.1.4.1.164.6.3.2.1.1.1 | ColumndscpMappingCnfgIdx | not-accessible | current | This object indicates the Idx of the Agent Cnfg the following objects refer to. 255=Temporary Cnfg (when relevant, Set is done only to this configuration). For… |
| 1.3.6.1.4.1.164.6.3.2.1.1.2 | ColumndscpMappingDscpIdx | not-accessible | current | DSCP value of the incoming IP packet |
| 1.3.6.1.4.1.164.6.3.2.1.1.3 | ColumndscpMappingRegenPriority | read-write | current | The Regenerated Priority level the incoming DSCP value is mapped to. For FCD-155, valid values are 0,1,2,3 |
| 1.3.6.1.4.1.164.6.3.3 | NodeifTeQos | |||
| 1.3.6.1.4.1.164.6.3.3.1 | TableifTeQosTable | not-accessible | current | The TE QOS Interface Table. |
| 1.3.6.1.4.1.164.6.3.3.1.1 | RowifTeQosEntry | not-accessible | current | An entry in the TE QOS Interface table. |
| 1.3.6.1.4.1.164.6.3.3.1.1.1 | ColumnifTeQosIdx1 | not-accessible | current | This object indicates the 1st Index of the table. |
| 1.3.6.1.4.1.164.6.3.3.1.1.2 | ColumnifTeQosIdx2 | not-accessible | current | This object indicates the 2nd Index of the table. |
| 1.3.6.1.4.1.164.6.3.3.1.1.3 | ColumnifTeQosIdx3 | not-accessible | current | This object indicates the 3rd Index of the table. |
| 1.3.6.1.4.1.164.6.3.3.1.1.4 | ColumnifTeQosParam | read-write | current | This object is used for QOS attributes of the entry's entities. |
| 1.3.6.1.4.1.164.6.3.3.1.1.5 | ColumnifTeQosParam2 | read-write | current | This object is used for 2nd group QOS attributes of the entry's entities. |
| 1.3.6.1.4.1.164.6.3.3.1.1.6 | ColumnifTeQosStatus | read-write | current | This object is used to create, activate and destroy entries of this table. |
| 1.3.6.1.4.1.164.6.3.4 | NodeportQos | |||
| 1.3.6.1.4.1.164.6.3.4.1 | TableprtPriorityTable | not-accessible | current | A table - Parameters per port per Priority . |
| 1.3.6.1.4.1.164.6.3.4.1.1 | RowprtPriorityEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.6.3.4.1.1.1 | ColumnprtPriorityIdx1 | not-accessible | current | This attribute indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg. or any other Index. |
| 1.3.6.1.4.1.164.6.3.4.1.1.2 | ColumnprtPriorityPrtIdx | not-accessible | current | This object indicates a unique Port Index. Refer to device specification for port Index. |
| 1.3.6.1.4.1.164.6.3.4.1.1.3 | ColumnprtPriorityIdx | not-accessible | current | This object indicates the Traffic Priority Index. |
| 1.3.6.1.4.1.164.6.3.4.1.1.4 | ColumnprtPriorityIngressRateLimit | read-write | current | The maximum rate permitted at Ingress of this port with this Traffic Priority, in Kbps. |
| 1.3.6.1.4.1.164.6.3.4.2 | TableprtQosTable | not-accessible | current | Port QoS (Quality of Service) table. |
| 1.3.6.1.4.1.164.6.3.4.2.1 | RowprtQosEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.6.3.4.2.1.1 | ColumnprtQosIdx | not-accessible | current | The first index of the table. This attribute might indicate the Idx of the Cnfg (1..255) being accessed ; Idx of 255 relates to the TmpCnfg or any other Index. |
| 1.3.6.1.4.1.164.6.3.4.2.1.2 | ColumnprtQosPrtIdx | not-accessible | current | This object indicates a unique Port Index. Refer to device specification for port Index. |
| 1.3.6.1.4.1.164.6.3.4.2.1.3 | ColumnprtQosDirection | not-accessible | current | This object indicates the port's QoS Direction. |
| 1.3.6.1.4.1.164.6.3.4.2.1.4 | ColumnprtQosRateLimitPacketType | read-write | current | This object indicates the Type of Packets on which Rate Limitation is applied. |
| 1.3.6.1.4.1.164.6.3.4.2.1.5 | ColumnprtQosRateLimitCIR | read-write | current | This object indicates the port's CIR (Committed Information Rate) in Kbps. Value=0 represents best effort. |
| 1.3.6.1.4.1.164.6.3.4.2.1.6 | ColumnprtQosRateLimitCBS | read-write | current | This object indicates the port's CBS (Committed Burst Size) in KB. Value=0 represents best effort. |
| 1.3.6.1.4.1.164.6.3.4.2.1.7 | ColumnprtQosRateLimitEIR | read-write | current | This object indicates the port's EIR (Excess Information Rate) in Kbps. |
| 1.3.6.1.4.1.164.6.3.4.2.1.8 | ColumnprtQosRateLimitEBS | read-write | current | This object indicates the port's EBS (Excess Burst Size) in KB. |
| 1.3.6.1.4.1.164.6.3.5 | NodeprtTrafficClass | |||
| 1.3.6.1.4.1.164.6.3.5.1 | TableportTrafficClassTable | not-accessible | current | Mapping of port to Traffic Class level. |
| 1.3.6.1.4.1.164.6.3.5.1.1 | RowportTrafficClassEntry | not-accessible | current | An entry in portTrafficClassTable. |
| 1.3.6.1.4.1.164.6.3.5.1.1.1 | ColumnportTrafficClassIdx1 | not-accessible | current | This attribute indicates the 1st index of the table. This may be the Idx of the Cnfg(1..255) being accessed; Idx of 255 relates to the TmpCnfg, or any other In… |
| 1.3.6.1.4.1.164.6.3.5.1.1.2 | ColumnportTrafficClassPortIdx | not-accessible | current | This object indicates a unique Port Index. Refer to device specification for port Index. |
| 1.3.6.1.4.1.164.6.3.5.1.1.3 | ColumnportTrafficClass | read-write | current | This object indicates the Traffic Class level of this port. |
| 1.3.6.1.4.1.164.6.3.6 | TableserviceTable | not-accessible | current | Table of services. |
| 1.3.6.1.4.1.164.6.3.6.1 | RowserviceEntry | not-accessible | current | An entry in the Service Table. |
| 1.3.6.1.4.1.164.6.3.6.1.1 | ColumnflowIndex | not-accessible | current | Defines the Flow ID the service is associated to. |
| 1.3.6.1.4.1.164.6.3.6.1.2 | ColumnserviceIndex | not-accessible | current | Defines the Service ID - according to the CoS. |
| 1.3.6.1.4.1.164.6.3.6.1.3 | ColumnserviceRowStatus | read-create | current | This attribute is used to create a new row or to delete an existing row in the table. |
| 1.3.6.1.4.1.164.6.3.6.1.4 | ColumnserviceName | read-create | current | This attribute defines the service name. |
| 1.3.6.1.4.1.164.6.3.6.1.5 | ColumnserviceBwProfileId | read-create | current | This variable holds the index of the Ingress BW profile assigned to that service. |
| 1.3.6.1.4.1.164.6.3.7 | TableevcCosTable | not-accessible | current | This table defines mapping of Ethernet Virtual Connection (EVC) ID to Class of Service (CoS) ID |
| 1.3.6.1.4.1.164.6.3.7.1 | RowevcCosEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.6.3.7.1.1 | ColumnevcCosCnfgIdx | not-accessible | current | This attribute indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.6.3.7.1.2 | ColumnevcCosEvcIdx | not-accessible | current | This attribute indicates EVC Id. |
| 1.3.6.1.4.1.164.6.3.7.1.3 | ColumnevcCosRowStatus | read-create | current | This attribute allows to create/delete a row in this table. |
| 1.3.6.1.4.1.164.6.3.7.1.5 | ColumnevcCosEvcName | read-create | current | A string that identifies the EVC. It should be unique in the Maintenance Domain (i.e., in the managed network) Used as MEG ID field in OAM messages. |
| 1.3.6.1.4.1.164.6.3.7.1.6 | ColumnevcCosSpVlanId | read-create | current | This object indicates the SP (Service Provider) VLAN used when sending an OAM message for the specified EVC. |
| 1.3.6.1.4.1.164.6.3.8 | TableserviceStatTable | not-accessible | current | Service statistics table. |
| 1.3.6.1.4.1.164.6.3.8.1 | RowserviceStatEntry | not-accessible | current | An entry in the Service Statistics Table. |
| 1.3.6.1.4.1.164.6.3.8.1.1 | ColumnserviceStatDirection | not-accessible | current | The direction in wich the measurement is taken. |
| 1.3.6.1.4.1.164.6.3.8.1.2 | ColumnsrvForwardGreenPackets | read-only | current | This attribute displays the counted number of forwarded packets that where marked Green. |
| 1.3.6.1.4.1.164.6.3.8.1.3 | ColumnsrvForwardGreenPacktesOverflow | read-only | current | This attribute displays the number of times that the forwardGreenPackets counter has overflowed. |
| 1.3.6.1.4.1.164.6.3.8.1.4 | ColumnsrvForwardYellowPackets | read-only | current | This attribute displays the counted number of forwarded packets that where marked Yellow. |
| 1.3.6.1.4.1.164.6.3.8.1.5 | ColumnsrvForwardYellowPacketsOverflow | read-only | current | This attribute displays the number of times that the forwardYellowPackets counter has overflowed. |
| 1.3.6.1.4.1.164.6.3.8.1.6 | ColumnsrvDiscardGreenPacket | read-only | current | This attribute displays the counted number of discarded packets that where marked Green. |
| 1.3.6.1.4.1.164.6.3.8.1.7 | ColumnsrvDiscardGreenPacketOverflow | read-only | current | This attribute displays the number of times that the discardGreenPacket counter has overflowed. |
| 1.3.6.1.4.1.164.6.3.8.1.8 | ColumnsrvDiscardYellowRedPackets | read-only | current | This attribute displays the counted number of discarded packets that where marked Yellow or Red. |
| 1.3.6.1.4.1.164.6.3.8.1.9 | ColumnsrvDiscardYellowRedPacketsOverflow | read-only | current | This attribute displays the number of times that the discardYellowRedPackets counter has overflowed. |
| 1.3.6.1.4.1.164.6.3.8.1.10 | ColumnsrvForwardGreenBytes | read-only | current | This attribute displays the counted number of forwarded bytes that where marked Green. |
| 1.3.6.1.4.1.164.6.3.8.1.11 | ColumnsrvForwardGreenBytesOverflow | read-only | current | This attribute displays the number of times that the forwardGreenBytes counter has overflowed. |
| 1.3.6.1.4.1.164.6.3.8.1.12 | ColumnsrvForwardYellowBytes | read-only | current | This attribute displays the counted number of forwarded bytes that where marked Yellow. |
| 1.3.6.1.4.1.164.6.3.8.1.13 | ColumnsrvForwardYellowBytesOverflow | read-only | current | This attribute displays the number of times that the forwardYellowBytes counter has overflowed. |
| 1.3.6.1.4.1.164.6.3.8.1.14 | ColumnsrvDiscardGreenBytes | read-only | current | This attribute displays the counted number of discarded bytes that where marked Green. |
| 1.3.6.1.4.1.164.6.3.8.1.15 | ColumnsrvDiscardGreenBytesOverflow | read-only | current | This attribute displays the number of times that the discardGreenBytes counter has overflowed. |
| 1.3.6.1.4.1.164.6.3.8.1.16 | ColumnsrvDiscardYellowRedBytes | read-only | current | This attribute displays the counted number of discarded bytes that where marked Yellow or Red. |
| 1.3.6.1.4.1.164.6.3.8.1.17 | ColumnsrvDiscardYellowRedBytesOverflow | read-only | current | This attribute displays the number of times that the discardYellowRedBytes counter has overflowed. |
| 1.3.6.1.4.1.164.6.3.8.1.18 | ColumnsrvResetStatsCmd | read-create | current | Reset statistic counters of the service. |
| 1.3.6.1.4.1.164.6.3.8.1.19 | ColumnsrvDiscardYellowPackets | read-only | current | This attribute displays the counted number of discarded packets that where marked Yellow. |
| 1.3.6.1.4.1.164.6.3.8.1.20 | ColumnsrvDiscardYellowPacketsOverflow | read-only | current | This attribute displays the number of times that the discardYellowPackets counter has overflowed. |
| 1.3.6.1.4.1.164.6.3.8.1.21 | ColumnsrvDiscardYellowBytes | read-only | current | This attribute displays the counted number of discarded bytes that where marked Yellow. |
| 1.3.6.1.4.1.164.6.3.8.1.22 | ColumnsrvDiscardYellowBytesOverflow | read-only | current | This attribute displays the number of times that the discardYellowBytes counter has overflowed. |
| 1.3.6.1.4.1.164.6.3.8.1.23 | ColumnsrvDiscardRedPackets | read-only | current | This attribute displays the counted number of discarded packets that where marked Red. |
| 1.3.6.1.4.1.164.6.3.8.1.24 | ColumnsrvDiscardRedPacketsOverflow | read-only | current | This attribute displays the number of times that the discardRedPackets counter has overflowed. |
| 1.3.6.1.4.1.164.6.3.8.1.25 | ColumnsrvDiscardRedBytes | read-only | current | This attribute displays the counted number of discarded bytes that where marked Red. |
| 1.3.6.1.4.1.164.6.3.8.1.26 | ColumnsrvDiscardRedBytesOverflow | read-only | current | This attribute displays the number of times that the discardRedBytes counter has overflowed. |
| 1.3.6.1.4.1.164.6.3.9 | NodemappingProfileObjects | |||
| 1.3.6.1.4.1.164.6.3.9.1 | TableflowMappingProfileTable | not-accessible | current | This table holds flow mapping profiles. |
| 1.3.6.1.4.1.164.6.3.9.1.1 | RowflowMappingProfileEntry | not-accessible | current | Each entry in this table describes one Flow mapping profile with one of its Flow Mapping supported, according to the Priority order. The information includes a… |
| 1.3.6.1.4.1.164.6.3.9.1.1.1 | ColumnflowMappingProfileIndex | not-accessible | current | A running index for the Flow Mapping Profile table. |
| 1.3.6.1.4.1.164.6.3.9.1.1.2 | ColumnflowMappingProfilePriority | not-accessible | current | The priority of the Mapping selected by flowMappingProfileMapIndex within the Flow Mapping Profile. |
| 1.3.6.1.4.1.164.6.3.9.1.1.3 | ColumnflowMappingProfileRowStatus | read-create | current | This attribute is used to create a new row or to delete an existing row in the table. |
| 1.3.6.1.4.1.164.6.3.9.1.1.4 | ColumnflowMappingProfileNumOfMaps | read-create | current | This attribute determines the number of the mappings associated to the Flow Mapping Profile. |
| 1.3.6.1.4.1.164.6.3.9.1.1.5 | ColumnflowMappingProfileMapIndex | read-create | current | This attribute holds a reference to the mapping index. It specifies the mapping selected for the Mapping Profile for the selected Priority. When flowMappingPro… |
| 1.3.6.1.4.1.164.6.3.9.1.1.6 | ColumnflowMappingProfileName | read-create | current | This attribute defines the name assigned to flowMappingIndex profile. |
| 1.3.6.1.4.1.164.6.3.9.2 | TableqosFlowMappingTable | not-accessible | current | A table of Flow Mapping. |
| 1.3.6.1.4.1.164.6.3.9.2.1 | RowqosFlowMappingEntry | not-accessible | current | Each entry in this table describes one Flow Mapping. The information includes combination (AND function) of all the classifications, as defined in the qosFlowM… |
| 1.3.6.1.4.1.164.6.3.9.2.1.1 | ColumnqosFlowMappingIdx1 | not-accessible | current | - In case the table is accessed via flowMappingProfileTable this is a running index for the QoS Flow Mapping table. - In case the table is not accessed via flo… |
| 1.3.6.1.4.1.164.6.3.9.2.1.2 | ColumnqosFlowMappingIdx2 | not-accessible | current | An index for the QoS Flow Mapping table. - In case the table is accessed via flowMappingProfileTable the index will be fixed = 1. - In case the table is not ac… |
| 1.3.6.1.4.1.164.6.3.9.2.1.3 | ColumnqosFlowMappingIdx3 | not-accessible | current | An index for the QoS Flow Mapping table. - In case the table is accessed via flowMappingProfileTable the index will be fixed = 1. - In case the table is not ac… |
| 1.3.6.1.4.1.164.6.3.9.2.1.4 | ColumnqosFlowMappingRowStatus | read-create | current | This attribute is used to create a new row or to delete an existing row in the table. |
| 1.3.6.1.4.1.164.6.3.9.2.1.5 | ColumnqosFlowMappingCriteria | read-create | current | This attribute determines upon which criterion the flow will be mapped. |
| 1.3.6.1.4.1.164.6.3.9.2.1.6 | ColumnqosFlowMappingIeee802dot1p | read-create | current | This attribute determines which TOS values are applicable for that flow. Each bit (0..7) represents a different 802.1 P-bit value. Setting '1' to the bit means… |
| 1.3.6.1.4.1.164.6.3.9.2.1.7 | ColumnqosFlowMappingTos | read-create | current | This attribute determines which TOS values are applicable for that flow. Each bit (0..7) represents a different TOS value. Setting '1' to the bit means that th… |
| 1.3.6.1.4.1.164.6.3.9.2.1.8 | ColumnqosFlowMappingFromDscp | read-create | current | This attribute determines the first DSCP value to compare with in a range. It is relevant only in case the dscp bit (2) in qosFlowMappingCriteria equals 1. |
| 1.3.6.1.4.1.164.6.3.9.2.1.9 | ColumnqosFlowMappingToDscp | read-create | current | This attribute determines the first DSCP value to compare with in a range. It is relevant only in case the dscp bit (2) in qosFlowMappingCriteria equals 1. |
| 1.3.6.1.4.1.164.6.3.9.2.1.10 | ColumnqosFlowMappingFromVlanId | read-create | current | This attribute determines the first VLAN ID value to compare with in a range. It is relevant only in case the vlanId bit (3) in qosFlowMappingCriteria equals 1. |
| 1.3.6.1.4.1.164.6.3.9.2.1.11 | ColumnqosFlowMappingToVlanId | read-create | current | This attribute determines the last VLAN ID value to compare with in a range. It is relevant only in case the vlanId bit (3) in qosFlowMappingCriteria equals 1. |
| 1.3.6.1.4.1.164.6.3.9.2.1.12 | ColumnqosFlowMappingFromSrcMacAddr | read-create | current | This attribute determines the first source MAC address to compare with in a range. It is relevant only in case the macSrcAddr bit (4) in qosFlowMappingCriteria… |
| 1.3.6.1.4.1.164.6.3.9.2.1.13 | ColumnqosFlowMappingToSrcMacAddr | read-create | current | This attribute determines the last source MAC address to compare with in a range. It is relevant only in case the macSrcAddr bit (4) in qosFlowMappingCriteria … |
| 1.3.6.1.4.1.164.6.3.9.2.1.14 | ColumnqosFlowMappingFromDestMacAddr | read-create | current | This attribute determines the first destination MAC address to compare with in a range. It is relevant only in case the macDestAddr (5) bit in qosFlowMappingCr… |
| 1.3.6.1.4.1.164.6.3.9.2.1.15 | ColumnqosFlowMappingToDestMacAddr | read-create | current | This attribute determines the last destination MAC address to compare with in a range. It is relevant only in case the macDestAddr (5) bit in qosFlowMappingCri… |
| 1.3.6.1.4.1.164.6.3.9.2.1.16 | ColumnqosFlowMappingFromSrcIpAddr | read-create | current | This attribute determines the first source IP address to compare with in a range. It is relevant only in case the ipSrcAddr (6) bit in qosFlowMappingCriteria e… |
| 1.3.6.1.4.1.164.6.3.9.2.1.17 | ColumnqosFlowMappingToSrcIpAddr | read-create | current | This attribute determines the last source IP address to compare with in a range. It is relevant only in case the ipSrcAddr (6) bit in qosFlowMappingCriteria eq… |
| 1.3.6.1.4.1.164.6.3.9.2.1.18 | ColumnqosFlowMappingFromDestIpAddr | read-create | current | This attribute determines the first destination IP address to compare with in a range. It is relevant only in case the ipDestAddr (7) bit in qosFlowMappingCrit… |
| 1.3.6.1.4.1.164.6.3.9.2.1.19 | ColumnqosFlowMappingToDestIpAddr | read-create | current | This attribute determines the last destination IP address to compare with in a range. It is relevant only in case the ipDestAddr (7) bit in qosFlowMappingCrite… |
| 1.3.6.1.4.1.164.6.3.9.2.1.20 | ColumnqosFlowMappingFromTcpSrcPort | read-create | current | This attribute determines the first TCP source port to compare with in a range. It is relevant only in case the tcpSrcPort bit (8) in qosFlowMappingCriteria eq… |
| 1.3.6.1.4.1.164.6.3.9.2.1.21 | ColumnqosFlowMappingToTcpSrcPort | read-create | current | This attribute determines the last TCP source port to compare with in a range. It is relevant only in case the tcpSrcPort bit (8) in qosFlowMappingCriteria equ… |
| 1.3.6.1.4.1.164.6.3.9.2.1.22 | ColumnqosFlowMappingFromTcpDestPort | read-create | current | This attribute determines the first TCP destination port to compare with in a range. It is relevant only in case the tcpDestPort bit (9) in qosFlowMappingCrite… |
| 1.3.6.1.4.1.164.6.3.9.2.1.23 | ColumnqosFlowMappingToTcpDestPort | read-create | current | This attribute determines the last TCP destination port to compare with in a range. It is relevant only in case the tcpDestPort bit (9) in qosFlowMappingCriter… |
| 1.3.6.1.4.1.164.6.3.9.2.1.24 | ColumnqosFlowMappingFromUdpSrcPort | read-create | current | This attribute determines the first UDP source port to compare with in a range. It is relevant only in case the udpSrcPort bit (10) in qosFlowMappingCriteria e… |
| 1.3.6.1.4.1.164.6.3.9.2.1.25 | ColumnqosFlowMappingToUdpSrcPort | read-create | current | This attribute determines the last UDP source port to compare with in a range. It is relevant only in case the udpSrcPort bit (10) in qosFlowMappingCriteria eq… |
| 1.3.6.1.4.1.164.6.3.9.2.1.26 | ColumnqosFlowMappingFromUdpDestPort | read-create | current | This attribute determines the first UDP destination port to compare with in a range. It is relevant only in case the udpDestPort bit (11) in qosFlowMappingCrit… |
| 1.3.6.1.4.1.164.6.3.9.2.1.27 | ColumnqosFlowMappingToUdpDestPort | read-create | current | This attribute determines the last UDP destination port to compare with in a range. It is relevant only in case the udpDestPort bit (11) in qosFlowMappingCrite… |
| 1.3.6.1.4.1.164.6.3.9.2.1.28 | ColumnqosFlowMappingFromIpPrecedence | read-create | current | This attribute determines the first IpPrecedence value to compare with in a range. It is relevant only in case the IpPrecedence bit (12) in qosFlowMappingCrite… |
| 1.3.6.1.4.1.164.6.3.9.2.1.29 | ColumnqosFlowMappingToIpPrecedence | read-create | current | This attribute determines the last IpPrecedence value to compare with in a range. It is relevant only in case the IpPrecedence bit (12) in qosFlowMappingCriter… |
| 1.3.6.1.4.1.164.6.3.9.2.1.30 | ColumnqosFlowMappingInnerIeee802dot1p | read-create | current | This attribute determines which TOS values are applicable for that flow. Each bit (0..7) represents a different inner 802.1 P-bit value. Setting '1' to the bit… |
| 1.3.6.1.4.1.164.6.3.9.2.1.31 | ColumnqosFlowMappingFromInnerVlanId | read-create | current | This attribute determines the first inner VLAN ID value to compare with in a range. It is relevant only in case the innerVlanId bit(14) in qosFlowMappingCriter… |
| 1.3.6.1.4.1.164.6.3.9.2.1.32 | ColumnqosFlowMappingToInnerVlanId | read-create | current | This attribute determines the last inner VLAN ID value to compare with in a range. It is relevant only in case the innerVlanId bit(14) in qosFlowMappingCriteri… |
| 1.3.6.1.4.1.164.6.3.9.2.1.33 | ColumnqosFlowMappingEtherType | read-create | current | Determines the Tag Protocol Identifier (in Hex). For example: 0x8100 (C-TAG) 0x88A8 (S-TAG) It is relevant only in case the etherType bit (17) in qosFlowMappin… |
| 1.3.6.1.4.1.164.6.3.10 | TablecosProfileTable | not-accessible | current | Class of Service Profile table. Each profile holds a priority method, and a mappring function that maps the priority values (range according to the method) int… |
| 1.3.6.1.4.1.164.6.3.10.1 | RowcosProfileEntry | not-accessible | current | A conceptual row where each row contains one CoS attributes. |
| 1.3.6.1.4.1.164.6.3.10.1.1 | ColumncosProfileIndex | not-accessible | current | Defines the CoS Profile ID. |
| 1.3.6.1.4.1.164.6.3.10.1.2 | ColumncosProfileRowStatus | read-create | current | This attribute is used to create a new row or to delete an existing row in the table. |
| 1.3.6.1.4.1.164.6.3.10.1.3 | ColumncosProfileCosMethod | read-create | current | Defines the priority method upon CoS mapping is done. |
| 1.3.6.1.4.1.164.6.3.10.1.4 | ColumncosProfileName | read-create | current | This attribute defines the name assigned to CoS profile. |
| 1.3.6.1.4.1.164.6.3.10.1.5 | ColumncosProfileCosMapping | read-create | current | This attribute defines the value of the CoS that is assigned for each priority. The number of the valid octets depends upon the priority method selected: Octet… |
| 1.3.6.1.4.1.164.6.3.11 | NodequeueProfileObjects | |||
| 1.3.6.1.4.1.164.6.3.11.1 | TableqProfileTable | not-accessible | current | This table defines the profiles for a cluster of queues. |
| 1.3.6.1.4.1.164.6.3.11.1.1 | RowqProfileEntry | not-accessible | current | A conceptual row where each row contains one Queue Cluster attribute. |
| 1.3.6.1.4.1.164.6.3.11.1.1.1 | ColumnqProfileIndex | not-accessible | current | Defines the Queue Cluster Profile ID. |
| 1.3.6.1.4.1.164.6.3.11.1.1.2 | ColumnqProfileRowStatus | read-create | current | This attribute is used to create a new row or to delete an existing row in the table. |
| 1.3.6.1.4.1.164.6.3.11.1.1.3 | ColumnqProfileName | read-create | current | This attribute holds the name of the Queue cluster profile. |
| 1.3.6.1.4.1.164.6.3.11.1.1.4 | ColumnqProfileNumberOfInternalQ | read-create | current | This attribute holds the number of the internal queue profiles that are pointed by qInternalQProfile. |
| 1.3.6.1.4.1.164.6.3.11.1.1.5 | ColumnqProfileInternalQProfile | read-create | current | This attribute holds the indexes to the queue profiles in the qInternalProfileTable. Each couple of octets holds an index to the qInternalProfileTable. |
| 1.3.6.1.4.1.164.6.3.11.2 | TableqInternalProfileTable | not-accessible | current | This table holds queue profiles. |
| 1.3.6.1.4.1.164.6.3.11.2.1 | RowqInternalProfileEntry | not-accessible | current | A conceptual row where each row contains one Queue attribute. |
| 1.3.6.1.4.1.164.6.3.11.2.1.1 | ColumnqInternalProfileIndex | not-accessible | current | Defines the Queue Profile ID. |
| 1.3.6.1.4.1.164.6.3.11.2.1.2 | ColumnqInternalProfileRowStatus | read-create | current | This attribute is used to create a new row or to delete an existing row in the table. |
| 1.3.6.1.4.1.164.6.3.11.2.1.3 | ColumnqInternalProfileScheduling | read-create | current | This attribute determines the queue scheduling method. |
| 1.3.6.1.4.1.164.6.3.11.2.1.4 | ColumnqInternalProfileWFQWeight | read-create | current | This attribute determines the weight that each WFQ (Weighted Fair Queue) participant gets. It is applicable only when scheduling is configured to WFQ. |
| 1.3.6.1.4.1.164.6.3.11.2.1.5 | ColumnqInternalProfileQueueLength | read-create | current | This attribute determines the length of the queue. |
| 1.3.6.1.4.1.164.6.3.11.2.1.6 | ColumnqInternalProfileWredStartDropThresh | read-create | current | This attribute determines the length that the queue (Start Value) must reach before the packets colored yellow will start being dropped by the WRED (Weighted R… |
| 1.3.6.1.4.1.164.6.3.11.2.1.7 | ColumnqInternalProfileWredDropAllThresh | read-create | current | This attribute determines the length that the queue (Stop Value) must reach before the WRED (Weighted Random Early Detection) shaper mechanism stops dropping r… |
| 1.3.6.1.4.1.164.6.3.11.2.1.8 | ColumnqInternalProfileWredDropProbability | read-create | current | This attribute determines the percentage of packets that are being dropped at the point when the length of the queue reaches the Stop value. So, effectively, t… |
| 1.3.6.1.4.1.164.6.3.11.2.1.9 | ColumnqInternalProfileRateLimit | read-create | current | This attribute determines the Rate Limit of the queue in Kbps. Value=0 represents best effort. |
| 1.3.6.1.4.1.164.6.3.11.2.1.10 | ColumnqInternalProfileShaperProfile | read-create | current | This attribute defines the Shaper Profile (bwProfileIndex from bwProfileTable) assigned to this qInternalProfile. Valid range of bwProfileIndex for Shaper Prof… |
| 1.3.6.1.4.1.164.6.3.11.3 | TablequeueGroupTable | not-accessible | current | This table defines the queue groups/blocks,their level and connections between them. |
| 1.3.6.1.4.1.164.6.3.11.3.1 | RowqueueGroupEntry | not-accessible | current | A conceptual row where each row contains one Queue group. |
| 1.3.6.1.4.1.164.6.3.11.3.1.1 | ColumnqueueGroupName | not-accessible | current | Defines the Queue Group unique name. |
| 1.3.6.1.4.1.164.6.3.11.3.1.2 | ColumnqueueGroupQBlockLevel | not-accessible | current | This attribute holds the Level of the Queue Block .First level is 1. NA=2^32-1. |
| 1.3.6.1.4.1.164.6.3.11.3.1.3 | ColumnqueueGroupQBlockIdx | not-accessible | current | This attribute holds the ID of the Queue Block. NA=2^32-1. |
| 1.3.6.1.4.1.164.6.3.11.3.1.4 | ColumnqueueGroupRowStatus | read-create | current | This attribute is used to create a new row or to delete an existing row in the table. |
| 1.3.6.1.4.1.164.6.3.11.3.1.5 | ColumnqueueGroupQBlockProfile | read-create | current | This attribute defines the Queue profile assigned to this Queue Block. This object points to qProfileIndex in qProfileTable. |
| 1.3.6.1.4.1.164.6.3.11.3.1.6 | ColumnqueueGroupQBlockShaperProfile | read-create | current | This attribute defines the Shaper profile assigned to this Queue Block. |
| 1.3.6.1.4.1.164.6.3.11.3.1.7 | ColumnqueueGroupPointToQBlock | read-create | current | This attribute defines the Queue Block name of the next Queue Block level that is pointed by this Queue Block. |
| 1.3.6.1.4.1.164.6.3.11.3.1.8 | ColumnqueueGroupPointToInternalQueue | read-create | current | This attribute defines the internal queue whithin queueGroupPointToQBlock that is pointed by this Queue Block. |
| 1.3.6.1.4.1.164.6.3.11.3.1.9 | ColumnqueueGroupQBlockName | read-create | current | This attribute holds the name of the Queue Block. |
| 1.3.6.1.4.1.164.6.3.12 | TablemarkingProfileTable | not-accessible | current | Marking profile table. Each profile holds a marking function which converts CoS values to Service Provider priority values. |
| 1.3.6.1.4.1.164.6.3.12.1 | RowmarkingProfileEntry | not-accessible | current | A conceptual row where each row contains one Marking attribute. |
| 1.3.6.1.4.1.164.6.3.12.1.1 | ColumnmarkingProfileIndex | not-accessible | current | Defines the Marking Profile ID. |
| 1.3.6.1.4.1.164.6.3.12.1.2 | ColumnmarkingProfileRowStatus | read-create | current | This attribute is used to create a new row or to delete an existing row in the table. |
| 1.3.6.1.4.1.164.6.3.12.1.3 | ColumnmarkingProfileName | read-create | current | This attribute defines the unique name assigned to the Marking profile. |
| 1.3.6.1.4.1.164.6.3.12.1.4 | ColumnmarkingSpVlanPBit | read-create | current | For ETX-202A : This attribute defines the value of the SP VLAN P-Bit that is assigned for each CoS: Octet 0 corresponds to CoS = 0 Octet 1 corresponds to CoS =… |
| 1.3.6.1.4.1.164.6.3.12.1.5 | ColumnmarkingProfileMethod | read-create | current | This attribute defines the method upon which marking is done. |
| 1.3.6.1.4.1.164.6.4 | NoderadTransport | |||
| 1.3.6.1.4.1.164.6.4.1 | NoderadTransportDomains | |||
| 1.3.6.1.4.1.164.6.4.1.1 | IdentityradTransportDomainSnmpEfmOam | current | The SNMP over EFM OAM transport domain. The corresponding transport address is of type RadTransportAddressEfmOam for EFM OAM addresses (port). | |
| 1.3.6.1.4.1.164.7 | NoderadStkHub | |||
| 1.3.6.1.4.1.164.7.0 | IdentityradStkHubEvents | current | The events for Rad Stackable General products. | |
| 1.3.6.1.4.1.164.7.0.26 | NotificationportStatusChanged | current | This trap is sent each time port status was changed. | |
| 1.3.6.1.4.1.164.7.0.33 | NotificationsoftErrors | current | This trap is sent when the software errors threshold is exceeded. | |
| 1.3.6.1.4.1.164.7.1 | NodestkHubGen | |||
| 1.3.6.1.4.1.164.7.1.1 | NodestkHubGenAgn | |||
| 1.3.6.1.4.1.164.7.1.1.1 | ScalarstkHubAgentResetConfig | read-write | current | Setting the value to ON(3)is interpreted as a reset command for the agent NV Ram. When reset process is ended, a trap will be issued. |
| 1.3.6.1.4.1.164.7.1.1.2 | ScalarstkHubAgentSpecific | read-only | current | Object identifier of entity containing additional information regarding this instance. |
| 1.3.6.1.4.1.164.7.1.2 | TablestkHubSecurityTable | not-accessible | current | Hub's Security parameters. |
| 1.3.6.1.4.1.164.7.1.2.1 | RowstkHubSecurityEntry | not-accessible | current | An entry in table stkHubSecurityTable. |
| 1.3.6.1.4.1.164.7.1.2.1.1 | ColumnstkHubSecID | read-only | current | Segment's security unique identification number |
| 1.3.6.1.4.1.164.7.1.2.1.2 | ColumnstkHubSecEnable | read-write | current | This entry indicates whether the specific segment's security is active or not |
| 1.3.6.1.4.1.164.7.1.2.1.3 | ColumnstkHubSecurityPattern | read-write | current | A six-octet(48 bit) pattern: where the masked bits of stkHubSecurityMask need to match the MAC address of each port within the segment.Value of all zeros indic… |
| 1.3.6.1.4.1.164.7.1.2.1.4 | ColumnstkHubSecurityMask | read-write | current | Mask of the allowed MAC address that can be connected through the ports within the segment |
| 1.3.6.1.4.1.164.7.1.3 | TablestkHubPrtSecurityTable | not-accessible | current | Port Security parameters. |
| 1.3.6.1.4.1.164.7.1.3.1 | RowstkHubPrtSecurityEntry | not-accessible | current | An entry in table stkHubPrtSecurityTable. |
| 1.3.6.1.4.1.164.7.1.3.1.1 | ColumnstkHubModuleID | read-only | current | A unique identifier of the module(slot no.)this port is attached to. |
| 1.3.6.1.4.1.164.7.1.3.1.2 | ColumnstkHubPrtID | read-only | current | A unique identifier of the port within its module. |
| 1.3.6.1.4.1.164.7.1.3.1.3 | ColumnstkHubPrtSecID | read-only | current | A unique identifier of the security of a given port within its module. |
| 1.3.6.1.4.1.164.7.1.3.1.4 | ColumnstkHubPrtSecurityEnable | read-write | current | The value of this attribute determines application of the port security. |
| 1.3.6.1.4.1.164.7.1.3.1.5 | ColumnstkHubPrtSecurityPattern | read-write | current | A six-octet(48 bit) pattern: where the masked bits of stkHubPortSecurityMask need to match the MAC address. |
| 1.3.6.1.4.1.164.7.1.3.1.6 | ColumnstkHubPrtSecurityMask | read-write | current | Mask of the allowed MAC address that can be connected through this port. The security of the individual port over writes the security of the segment where the … |
| 1.3.6.1.4.1.164.7.2 | NodestkHubTR | |||
| 1.3.6.1.4.1.164.7.2.0 | IdentitystkHubTREvents | current | The events for Stackable Token Ring. | |
| 1.3.6.1.4.1.164.7.2.0.27 | NotificationmdlStatusChanged | current | This trap is sent each time module status was changed.When a module is disconnected, the stkHubTRMdlLed status will be 00 (no led) and the stkHubTRMdlType will… | |
| 1.3.6.1.4.1.164.7.2.0.91 | NotificationmacAddressUpdated | current | This trap will be sent upon every change of MACAddress on a port. | |
| 1.3.6.1.4.1.164.7.2.1 | NodestkHubTRRing | |||
| 1.3.6.1.4.1.164.7.2.1.1 | ScalarstkHubTRRingCorrelationEnable | read-write | current | When set to ON(3), the in-band agent should perform correlation each time a station enters/leaves the segment. |
| 1.3.6.1.4.1.164.7.2.1.2 | ScalarstkHubTRRingAutorecEnable | read-write | current | When set to ON(3), the in-band agent should perform autorecovery each time a beacon status is detected. |
| 1.3.6.1.4.1.164.7.2.1.3 | ScalarstkHubTRRingAutorecResult | read-only | current | When autorecovery is completed the result will be recorded. While in process, STARTED will be recorded.Before process, NOT STARTED will be recorded |
| 1.3.6.1.4.1.164.7.2.1.4 | ScalarstkHubTRRingResetStatistics | read-write | current | Setting the value of this attribute to ON(3) resets all the inband statistics and error counters. |
| 1.3.6.1.4.1.164.7.2.1.5 | ScalarstkHubTRRingLineErrCnt | read-only | current | This counter is incremented when a frame or token is copied or repeated by any of the stations on the ring, the E bit is zero in the frame or token and one of … |
| 1.3.6.1.4.1.164.7.2.1.6 | ScalarstkHubTRRingBurstErrCnt | read-only | current | This counter is incremented when any of the stations on the ring detects the absence of transitions for five half-bit timers (burst-five error). |
| 1.3.6.1.4.1.164.7.2.1.7 | ScalarstkHubTRRingACFCErrCnt | read-only | current | This counter is incremented when any of the stations on the ring receives an AMP or SMP frame in which A is equal to C is equal to 0, and then receives another… |
| 1.3.6.1.4.1.164.7.2.1.8 | ScalarstkHubTRRingTotErrCnt | read-only | current | The total of the above described errors |
| 1.3.6.1.4.1.164.7.2.1.9 | ScalarstkHubTRRingTotErrThreshold | read-write | current | The Total Errors Threshold value. A trap indicating Soft Error will be sent, if the total number of errors during the last 10 seconds, reached the threshold va… |
| 1.3.6.1.4.1.164.7.2.1.10 | ScalarstkHubTRRingTotalFrames | read-only | current | The total frames of the Ring. |
| 1.3.6.1.4.1.164.7.2.1.11 | ScalarstkHubTRRingTotalFramesRate | read-only | current | The rate of total frames on the Ring. |
| 1.3.6.1.4.1.164.7.2.1.12 | ScalarstkHubTRRingTotalOctets | read-only | current | The total octets of the Ring. |
| 1.3.6.1.4.1.164.7.2.1.13 | ScalarstkHubTRRingOctetsRatio | read-only | current | Current traffic for the last time interval. The traffic is expressed in percents of the maximum TokenRing traffic . |
| 1.3.6.1.4.1.164.7.2.2 | NodestkHubTRMdl | |||
| 1.3.6.1.4.1.164.7.2.2.1 | TablestkHubTRMdlTable | not-accessible | current | Bridge Hub Module table for TR media type Contains general information about the Module |
| 1.3.6.1.4.1.164.7.2.2.1.1 | RowstkHubTRMdlEntry | not-accessible | current | An entry in table stkHubTRMdlTable. |
| 1.3.6.1.4.1.164.7.2.2.1.1.1 | ColumnstkHubTRMdlID | read-only | current | A unique identifier of the module in stack. Internal module identifier is always 1 |
| 1.3.6.1.4.1.164.7.2.2.1.1.2 | ColumnstkHubTRMdlType | read-only | current | Indicates the type of the module connected with specific identifier |
| 1.3.6.1.4.1.164.7.2.2.1.1.3 | ColumnstkHubTRMdlReset | read-write | current | When this object is set to the value of ON(3), the module performs software reset. Upon completion, a trap will be issued to the management station and the val… |
| 1.3.6.1.4.1.164.7.2.2.1.1.4 | ColumnstkHubTRMdlLed | read-only | current | This entry specifies the LEDs status in the module . Each led will be represented by 4 bits where the first 2 bits will specify the status (NA, OFF, ON, BLINK)… |
| 1.3.6.1.4.1.164.7.2.2.1.1.5 | ColumnstkHubTRMdlSpeed | read-write | current | Attribute describing the bandwidth of the media as set by the module switch. For certain products, if the value of stkHubTRMdlMngState is 'enabled', then stkHu… |
| 1.3.6.1.4.1.164.7.2.2.1.1.6 | ColumnstkHubTRMdlMngState | read-only | current | This object indicates the status of the Manage switch as set on the back panel of the main module. 'enabled' - means that management can override setting of so… |
| 1.3.6.1.4.1.164.7.2.2.1.1.7 | ColumnstkHubTRMdlAutodisable | read-write | current | Attribute describing the status of port Autodisable mechanism, that protects against inserting in Token Ring adapters at the wrong speed. For certain products,… |
| 1.3.6.1.4.1.164.7.2.2.1.1.8 | ColumnstkHubTRMdlConfigMsg | read-only | current | Full configuration message coded in internal RND application format. This entry describes module' configuration. |
| 1.3.6.1.4.1.164.7.2.3 | NodestkHubTRPrt | |||
| 1.3.6.1.4.1.164.7.2.3.1 | TablestkHubTRPrtTable | not-accessible | current | Bridge Hub port table for TR media type Contains general information about the ports. |
| 1.3.6.1.4.1.164.7.2.3.1.1 | RowstkHubTRPrtEntry | not-accessible | current | An entry in table stkHubTRPrtTable. |
| 1.3.6.1.4.1.164.7.2.3.1.1.1 | ColumnstkHubTRPrtMdlID | read-only | current | A unique identifier of the module this port is attached to. |
| 1.3.6.1.4.1.164.7.2.3.1.1.2 | ColumnstkHubTRPrtID | read-only | current | A unique identifier of the port within its module. |
| 1.3.6.1.4.1.164.7.2.3.1.1.3 | ColumnstkHubTRPrtFunctionality | read-only | current | Describes the functionality of the port in a Token ring topology |
| 1.3.6.1.4.1.164.7.2.3.1.1.4 | ColumnstkHubTRPrtConnectorType | read-only | current | Type of hardware connector in the port. |
| 1.3.6.1.4.1.164.7.2.3.1.1.5 | ColumnstkHubTRPrtAdminCmd | read-write | current | By setting this attribute to DISABLE(2) or SHORT(4) the management station can force this lobe/port-connection to be removed and block any access to the networ… |
| 1.3.6.1.4.1.164.7.2.3.1.1.6 | ColumnstkHubTRPrtActiveState | read-only | current | This attribute describes the electrical or optical activity state of a lobe or the state of a port. Certain values may not be applicable in some cases |
| 1.3.6.1.4.1.164.7.2.3.1.1.7 | ColumnstkHubTRPrtTrapMaskEnable | read-write | current | When this attribute is set to OFF by the management console the agent starts sending the unmasked traps related to this port. Otherwise no traps from this port… |
| 1.3.6.1.4.1.164.7.2.3.1.1.8 | ColumnstkHubTRPrtStatus | read-only | current | This attribute indicates the status of this lobe/port connection: DISABLED-(2) to (6) indicates the reason for the disabled state. INSERTED(7)indicates that th… |
| 1.3.6.1.4.1.164.7.2.3.1.1.9 | ColumnstkHubTRPrtCableProtectEnable | read-only | current | The value of this attribute determines activation of the cable-fault protection mechanism of TCR and the optical link mechanism of TFR and TFC . |
| 1.3.6.1.4.1.164.7.2.3.1.1.10 | ColumnstkHubTRPrtFlipProtectEnable | read-write | current | The value of this attribute determines activation of the flipping-lobe protection mechanism of the port. |
| 1.3.6.1.4.1.164.7.2.3.1.1.11 | ColumnstkHubTRPrtMACAddress | read-only | current | The value of this object is the specific MAC address of this interface which uniquely identifies this Interface on a ring. |
| 1.3.6.1.4.1.164.7.2.3.1.1.12 | ColumnstkHubTRPrtType | read-only | current | Type of the port specific hardware |
| 1.3.6.1.4.1.164.7.3 | NodestkHubET | |||
| 1.3.6.1.4.1.164.7.3.2 | NodestkHubETMdl | |||
| 1.3.6.1.4.1.164.7.3.2.1 | TablestkHubETMdlTable | not-accessible | current | Bridge Hub Module table for ET media type Contains general information about the Module |
| 1.3.6.1.4.1.164.7.3.2.1.1 | RowstkHubETMdlEntry | not-accessible | current | An entry in table stkHubETMdlTable. |
| 1.3.6.1.4.1.164.7.3.2.1.1.1 | ColumnstkHubETMdlID | read-only | current | A unique identifier of the module in stack. Internal module identifier is always 1 |
| 1.3.6.1.4.1.164.7.3.2.1.1.2 | ColumnstkHubETMdlLed | read-only | current | This entry specifies the LEDs status in the module . Each led will be represented by 4 bits where the first 2 bits will specify the status (NA, OFF, ON, BLINK)… |
| 1.3.6.1.4.1.164.7.3.2.1.1.3 | ColumnstkHubETMdlReset | read-write | current | When this object is set to the value of hwReset(3), the module performs HW reset. When this object is set to the value of configReset(4), the module performs C… |
| 1.3.6.1.4.1.164.8 | NoderadPS | |||
| 1.3.6.1.4.1.164.8.1 | NodepktSwchSystem | |||
| 1.3.6.1.4.1.164.8.1.1 | NodepktSwchSysParam | |||
| 1.3.6.1.4.1.164.8.1.1.1 | NodepktSwchSysSParam | |||
| 1.3.6.1.4.1.164.8.1.1.1.1 | ScalarpktSwchSysX28PromptS | read-write | current | This specifies a different PAD prompt, instead of the standard default character, the *. Up to 10 characters can be entered. |
| 1.3.6.1.4.1.164.8.1.1.1.2 | ScalarpktSwchSysHeraldS | read-write | current | This specifies the PAD herald message for the SPS-6 and SPS-12. Up to 32 characters can be entered. Other devices will return a zero length octet string and wi… |
| 1.3.6.1.4.1.164.8.1.1.1.3 | ScalarpktSwchSysBulletinS | read-write | current | This specifies the PAD bulletin message. Up to 32 characters can be entered. |
| 1.3.6.1.4.1.164.8.1.1.1.4 | ScalarpktSwchSysComPortSubAddS | read-write | current | This is the scratch command port with the desired subaddress. |
| 1.3.6.1.4.1.164.8.1.1.1.5 | ScalarpktSwchSysComPortAltSubAddS | read-write | current | This configures the command port with the second subaddress. |
| 1.3.6.1.4.1.164.8.1.1.1.6 | ScalarpktSwchSysInnerCommLenS | read-write | current | This specifies the address length in digits for Inner Communication. |
| 1.3.6.1.4.1.164.8.1.1.1.7 | ScalarpktSwchSysXOnCharS | read-write | current | The ASCII code of the software flow control character that will be used to start/renew the data transfer. |
| 1.3.6.1.4.1.164.8.1.1.1.8 | ScalarpktSwchSysXOffCharS | read-write | current | The ASCII code of the software flow control character that will be used to stop the data transfer. |
| 1.3.6.1.4.1.164.8.1.1.1.9 | ScalarpktSwchSysMaxLcnS | read-write | current | The maximum number of LCNs on the device. |
| 1.3.6.1.4.1.164.8.1.1.1.10 | ScalarpktSwchSysMaxAIDS | read-write | current | The maximum number of AIDs on the device. |
| 1.3.6.1.4.1.164.8.1.1.1.11 | ScalarpktSwchSysDeviceIdS | read-write | current | The device Id. |
| 1.3.6.1.4.1.164.8.1.1.1.12 | ScalarpktSwchSysDtrPollPeriodS | read-write | current | Polling interval for DTR signal, in miliseconds. DTR signal may be used as trigger for opening and closing calls. The value should be Set in steps of 50 msec, … |
| 1.3.6.1.4.1.164.8.1.1.2 | NodepktSwchSysAParam | |||
| 1.3.6.1.4.1.164.8.1.1.2.1 | ScalarpktSwchSysX28PromptA | read-only | current | This specifies the active PAD prompt. |
| 1.3.6.1.4.1.164.8.1.1.2.2 | ScalarpktSwchSysHeraldA | read-only | current | This specifies the active PAD herald message for the SPS-6 and SPS-12. Other devices will return a zero length string. |
| 1.3.6.1.4.1.164.8.1.1.2.3 | ScalarpktSwchSysBulletinA | read-only | current | This indicates the active PAD bulletin message. |
| 1.3.6.1.4.1.164.8.1.1.2.4 | ScalarpktSwchSysComPortSubAddA | read-only | current | This is the active command port with the desired subaddress. |
| 1.3.6.1.4.1.164.8.1.1.2.5 | ScalarpktSwchSysComPortAltSubAddA | read-only | current | This is the active command port with the second subaddress. |
| 1.3.6.1.4.1.164.8.1.1.2.6 | ScalarpktSwchSysInnerCommLenA | read-only | current | This specifies the active address length in digits for Inner Communication. |
| 1.3.6.1.4.1.164.8.1.1.2.7 | ScalarpktSwchSysXOnCharA | read-only | current | The activeASCII code of the software flow control character that is used to start/renew the data transfer. |
| 1.3.6.1.4.1.164.8.1.1.2.8 | ScalarpktSwchSysXOffCharA | read-only | current | The active ASCII code of the software flow control character that is used to stop the data transfer. |
| 1.3.6.1.4.1.164.8.1.1.2.9 | ScalarpktSwchSysMaxLcnA | read-only | current | The active maximum number of LCNs on the device. |
| 1.3.6.1.4.1.164.8.1.1.2.10 | ScalarpktSwchSysMaxAIDA | read-only | current | The active maximum number of AIDs on the device. |
| 1.3.6.1.4.1.164.8.1.1.2.11 | ScalarpktSwchSysDeviceIdA | read-only | current | The device Id. |
| 1.3.6.1.4.1.164.8.1.1.2.12 | ScalarpktSwchSysDtrPollPeriodA | read-only | current | Polling interval for DTR signal, in miliseconds. DTR signal may be used as trigger for opening and closing calls. The value is in steps of 50 msec; if user set… |
| 1.3.6.1.4.1.164.8.1.1.3 | NodepktSwchSysEvRepS | |||
| 1.3.6.1.4.1.164.8.1.1.3.1 | ScalarpktSwchSysEvRepAdd1S | read-write | current | This specifies the X.25 address to which the reports selected by means of pktSwchSysEvRepMask1S and pktSwchSysEvRepPeriod1S will be sent. |
| 1.3.6.1.4.1.164.8.1.1.3.2 | ScalarpktSwchSysEvRepAdd2S | read-write | current | This specifies the X.25 address to which the reports selected by means of pktSwchSysEvRepMask2S and pktSwchSysEvRepPeriod2S will be sent. |
| 1.3.6.1.4.1.164.8.1.1.3.3 | ScalarpktSwchSysEvRepMask1S | read-write | current | This specifies the conditions on which reports are sent to the address specified in pktSwchSysEvRepAdd1S. The value is a sum of values (powers of two), where e… |
| 1.3.6.1.4.1.164.8.1.1.3.4 | ScalarpktSwchSysEvRepPeriod1S | read-write | current | This specifies the time interval in minutes at which periodic reports are sent to the address specified in pktSwchSysEvRepAdd1S. A value of zero indicates that… |
| 1.3.6.1.4.1.164.8.1.1.3.5 | ScalarpktSwchSysEvRepMask2S | read-write | current | This specifies the conditions on which reports are sent to the address specified in pktSwchSysEvRepAdd2S. The value is a sum of values (powers of two), where e… |
| 1.3.6.1.4.1.164.8.1.1.3.6 | ScalarpktSwchSysEvRepPeriod2S | read-write | current | This specifies the time interval in minutes at which periodic reports are sent to the address specified in pktSwchSysEvRepAdd2S. A value of zero indicates that… |
| 1.3.6.1.4.1.164.8.1.1.3.7 | ScalarpktSwchSysEvRepRetryCntS | read-write | current | Number of retries to send Event Reports to each port. Possible values: 0 - Disable retry mechanism 1-255 - Number of retries |
| 1.3.6.1.4.1.164.8.1.1.3.8 | ScalarpktSwchSysEvRepRetryDelayS | read-write | current | Time interval between retries (in minutes). Valid values: 1-255 |
| 1.3.6.1.4.1.164.8.1.1.3.9 | ScalarpktSwchSysEvRepRetryOptionsS | read-write | current | Event report options. The value is a sum of values (powers of two), where each value in the sum represents an option. The values that may be included in the su… |
| 1.3.6.1.4.1.164.8.1.1.4 | NodepktSwchSysEvRepA | |||
| 1.3.6.1.4.1.164.8.1.1.4.1 | ScalarpktSwchSysEvRepAdd1A | read-only | current | This specifies the active X.25 address to which the reports selected by means of pktSwchSysEvRepMask1A and pktSwchSysEvRepPeriod1A will be sent. |
| 1.3.6.1.4.1.164.8.1.1.4.2 | ScalarpktSwchSysEvRepAdd2A | read-only | current | This specifies the active X.25 address to which the reports selected by means of pktSwchSysEvRepMask2A and pktSwchSysEvRepPeriod2A will be sent. |
| 1.3.6.1.4.1.164.8.1.1.4.3 | ScalarpktSwchSysEvRepMask1A | read-only | current | This specifies the active conditions on which reports are sent to the address specified in pktSwchSysEvRepAdd1A. The value is a sum of values (powers of two), … |
| 1.3.6.1.4.1.164.8.1.1.4.4 | ScalarpktSwchSysEvRepPeriod1A | read-only | current | This specifies the active time interval in minutes at which periodic reports are sent to the address specified in pktSwchSysEvRepAdd1A. A value of zero indicat… |
| 1.3.6.1.4.1.164.8.1.1.4.5 | ScalarpktSwchSysEvRepMask2A | read-only | current | This specifies the active conditions on which reports are sent to the address specified in pktSwchSysEvRepAdd2A. The value is a sum of values (powers of two), … |
| 1.3.6.1.4.1.164.8.1.1.4.6 | ScalarpktSwchSysEvRepPeriod2A | read-only | current | This specifies the active time interval in minutes at which periodic reports are sent to the address specified in pktSwchSysEvRepAdd2A. A value of zero indicat… |
| 1.3.6.1.4.1.164.8.1.1.4.7 | ScalarpktSwchSysEvRepRetryCntA | read-only | current | Number of retries to send Event Reports to each port. Possible values: 0 - Disable retry mechanism 1-255 - Number of retries |
| 1.3.6.1.4.1.164.8.1.1.4.8 | ScalarpktSwchSysEvRepRetryDelayA | read-only | current | Time interval between retries (in minutes). Valid values: 1-255 |
| 1.3.6.1.4.1.164.8.1.1.4.9 | ScalarpktSwchSysEvRepRetryOptionsA | read-only | current | Event report options. The value is a sum of values (powers of two), where each value in the sum represents an option. The values that may be included in the su… |
| 1.3.6.1.4.1.164.8.1.1.5 | NodepktSwchSysGen | |||
| 1.3.6.1.4.1.164.8.1.1.5.1 | ScalarpktSwchSysDate | read-write | current | This is used to update the date on the device. |
| 1.3.6.1.4.1.164.8.1.1.5.2 | ScalarpktSwchSysTime | read-write | current | This is used to update the time on the device. |
| 1.3.6.1.4.1.164.8.1.1.5.3 | ScalarpktSwchSysAction | read-write | current | This is used to perform imperitive commands on the device. The reset command resets the device with the scratch values. |
| 1.3.6.1.4.1.164.8.1.1.5.4 | ScalarpktSwchSysRamSize | read-only | current | The RAM size on the device. |
| 1.3.6.1.4.1.164.8.1.1.5.5 | ScalarpktSwchSysNovramSize | read-only | current | The NOVRAM size on the device. |
| 1.3.6.1.4.1.164.8.1.1.5.6 | ScalarpktSwchSysNovramUtil | read-only | current | The NOVRAM utilization on the device. |
| 1.3.6.1.4.1.164.8.1.1.5.7 | ScalarpktSwchSysFreeDataBuff | read-only | current | The free data buffers on the device. |
| 1.3.6.1.4.1.164.8.1.1.5.8 | ScalarpktSwchSysMinDataBuffInPool | read-only | current | The minimum data buffers in the pool on the device. |
| 1.3.6.1.4.1.164.8.1.1.5.9 | ScalarpktSwchSysProtocols | read-only | current | The protocols the device can support. The value is a sum of values (powers of two), where each value in the sum represents a protocol. The values that may be i… |
| 1.3.6.1.4.1.164.8.1.1.5.10 | ScalarpktSwchSysChannelProtocols | read-only | current | The protocols the device can support on the async channels. 1 ASYNC 2 SLIP 3 PPP |
| 1.3.6.1.4.1.164.8.1.1.6 | ScalarpktSwchSysStatus | read-write | current | The status of the System data. The choices are those defined in the SNMPv2 Textual Conventions for RowStatus. This will allow easy replacement of the INTEGER s… |
| 1.3.6.1.4.1.164.8.1.2 | NodepktSwchRouting | |||
| 1.3.6.1.4.1.164.8.1.2.1 | TablepktSwchRoutSTable | not-accessible | current | The Scratch Routing Table defines the routes for incoming and outgoing data on the device. |
| 1.3.6.1.4.1.164.8.1.2.1.1 | RowpktSwchRoutSEntry | not-accessible | current | Defines the contents of each line in the Scratch Routing Table. |
| 1.3.6.1.4.1.164.8.1.2.1.1.1 | ColumnpktSwchRoutIdS | read-only | current | Index of the pktSwchRoutSTable. |
| 1.3.6.1.4.1.164.8.1.2.1.1.2 | ColumnpktSwchRoutAddressS | read-write | current | The address to which the entry applies. The use of the octet string syntax allows the use of the letter x as a wild card in the addresses. |
| 1.3.6.1.4.1.164.8.1.2.1.1.3 | ColumnpktSwchRoutDestLink1S | read-write | current | First destination link through which the data will be routed. For X.25 destination: any valid x.25 link no. For Frame Relay Link: any valid dlci with an x.25 e… |
| 1.3.6.1.4.1.164.8.1.2.1.1.4 | ColumnpktSwchRoutDestLink2S | read-write | current | Second destination link through which the data will be routed. For X.25 destination: any valid x.25 link no. For Frame Relay Link: any valid dlci with an x.25 … |
| 1.3.6.1.4.1.164.8.1.2.1.1.5 | ColumnpktSwchRoutDestLink3S | read-write | current | Third destination link through which the data will be routed. For X.25 destination: any valid x.25 link no. For Frame Relay Link: any valid dlci with an x.25 e… |
| 1.3.6.1.4.1.164.8.1.2.1.1.6 | ColumnpktSwchRoutLinkPrio1S | read-write | current | A priority of the associated destination of link 1. |
| 1.3.6.1.4.1.164.8.1.2.1.1.7 | ColumnpktSwchRoutLinkPrio2S | read-write | current | A priority of the associated destination of link 2. |
| 1.3.6.1.4.1.164.8.1.2.1.1.8 | ColumnpktSwchRoutLinkPrio3S | read-write | current | A priority of the associated destination of link 3. |
| 1.3.6.1.4.1.164.8.1.2.1.1.9 | ColumnpktSwchRoutSearchStatusS | read-write | current | off - The device stops searching for a matching address. on - The device continues searching for a matching address in the links of the next entry. |
| 1.3.6.1.4.1.164.8.1.2.1.1.10 | ColumnpktSwchRoutStatusS | read-write | current | The status of this routing table entry. The choices are those defined in the SNMPv2 Textual Conventions for RowStatus. This will allow easy replacement of the … |
| 1.3.6.1.4.1.164.8.1.2.2 | TablepktSwchRoutATable | not-accessible | current | The Active Routing Table defines the active routes for incoming and outgoing data on the device. |
| 1.3.6.1.4.1.164.8.1.2.2.1 | RowpktSwchRoutAEntry | not-accessible | current | Defines the contents of each line in the Active Routing Table. |
| 1.3.6.1.4.1.164.8.1.2.2.1.1 | ColumnpktSwchRoutIdA | read-only | current | Index of the pktSwchRoutATable. |
| 1.3.6.1.4.1.164.8.1.2.2.1.2 | ColumnpktSwchRoutAddressA | read-only | current | The address to which the entry applies. The use of the octet string syntax allows the use of the letter x as a wild card in the addresses. |
| 1.3.6.1.4.1.164.8.1.2.2.1.3 | ColumnpktSwchRoutDestLink1A | read-only | current | First destination link through which the data will be routed. For X.25 destination: any valid x.25 link no. For Frame Relay Link: any valid dlci with an x.25 e… |
| 1.3.6.1.4.1.164.8.1.2.2.1.4 | ColumnpktSwchRoutDestLink2A | read-only | current | Second destination link through which the data will be routed. For X.25 destination: any valid x.25 link no. For Frame Relay Link: any valid dlci with an x.25 … |
| 1.3.6.1.4.1.164.8.1.2.2.1.5 | ColumnpktSwchRoutDestLink3A | read-only | current | Third destination link through which the data will be routed. For X.25 destination: any valid x.25 link no. For Frame Relay Link: any valid dlci with an x.25 e… |
| 1.3.6.1.4.1.164.8.1.2.2.1.6 | ColumnpktSwchRoutLinkPrio1A | read-only | current | A priority of the associated destination of link 1. |
| 1.3.6.1.4.1.164.8.1.2.2.1.7 | ColumnpktSwchRoutLinkPrio2A | read-only | current | A priority of the associated destination of link 2. |
| 1.3.6.1.4.1.164.8.1.2.2.1.8 | ColumnpktSwchRoutLinkPrio3A | read-only | current | A priority of the associated destination of link 3. |
| 1.3.6.1.4.1.164.8.1.2.2.1.9 | ColumnpktSwchRoutSearchStatusA | read-only | current | off - The device stops searching for a matching address. on - The device continues searching for a matching address in the links of the next entry. |
| 1.3.6.1.4.1.164.8.1.2.3 | TablepktSwchPvcSTable | not-accessible | current | The Scratch Network PVC Table defines the network PVCs. |
| 1.3.6.1.4.1.164.8.1.2.3.1 | RowpktSwchPvcSEntry | not-accessible | current | Defines the contents of each line in the Scratch Network PVC table. |
| 1.3.6.1.4.1.164.8.1.2.3.1.1 | ColumnpktSwchPvcNumS | read-only | current | The PVC number corresponding to this entry. |
| 1.3.6.1.4.1.164.8.1.2.3.1.2 | ColumnpktSwchPvcSrcLinkS | read-write | current | The number of the link (1 through 6 for SPS-6 and 1 through 12 for SPS-12) that will be used as a source link to create a connection by means of the PVC. 0 mea… |
| 1.3.6.1.4.1.164.8.1.2.3.1.3 | ColumnpktSwchPvcSrcLcnS | read-write | current | Network pvc: The number of the logical channel (0-255) that will be used as the source logical channel to create a connection by means of the PVC. Local pvc: F… |
| 1.3.6.1.4.1.164.8.1.2.3.1.4 | ColumnpktSwchPvcDstLinkS | read-write | current | The number of the destination link that will be used. 0 means that the PVC will not be active. |
| 1.3.6.1.4.1.164.8.1.2.3.1.5 | ColumnpktSwchPvcDstLcnS | read-write | current | The number of the logical channel for the destination link. |
| 1.3.6.1.4.1.164.8.1.2.3.1.6 | ColumnpktSwchPvcStatusS | read-write | current | The status of this Network PVC table entry. The choices are those defined in the SNMPv2 Textual Conventions for RowStatus. This will allow easy replacement of … |
| 1.3.6.1.4.1.164.8.1.2.4 | TablepktSwchPvcATable | not-accessible | current | The Active Network PVC Table defines the active network PVCs. |
| 1.3.6.1.4.1.164.8.1.2.4.1 | RowpktSwchPvcAEntry | not-accessible | current | Defines the contents of each line in the Active Network PVC table. |
| 1.3.6.1.4.1.164.8.1.2.4.1.1 | ColumnpktSwchPvcNumA | read-only | current | The PVC number corresponding to this entry. |
| 1.3.6.1.4.1.164.8.1.2.4.1.2 | ColumnpktSwchPvcSrcLinkA | read-only | current | The number of the link (1 through 6 for SPS-6 and 1 through 12 for SPS-12) that is used as a source link to create a connection by means of the PVC. 0 means th… |
| 1.3.6.1.4.1.164.8.1.2.4.1.3 | ColumnpktSwchPvcSrcLcnA | read-only | current | Network pvc: The number of the logical channel (0-255) that will be used as the source logical channel to create a connection by means of the PVC. Local pvc: F… |
| 1.3.6.1.4.1.164.8.1.2.4.1.4 | ColumnpktSwchPvcDstLinkA | read-only | current | The number of the destination link that is used. 0 means that the PVC will not be active. |
| 1.3.6.1.4.1.164.8.1.2.4.1.5 | ColumnpktSwchPvcDstLcnA | read-only | current | The number of the logical channel for the destination link. |
| 1.3.6.1.4.1.164.8.1.3 | NodepktSwchNui | |||
| 1.3.6.1.4.1.164.8.1.3.1 | TablepktSwchNuiSTable | not-accessible | current | The NUI Table defines the NUIs that can be used by the device. |
| 1.3.6.1.4.1.164.8.1.3.1.1 | RowpktSwchNuiSEntry | not-accessible | current | Defines the contents of each line in the NUI Table. |
| 1.3.6.1.4.1.164.8.1.3.1.1.1 | ColumnpktSwchNuiIndexS | read-only | current | The index of this entry. |
| 1.3.6.1.4.1.164.8.1.3.1.1.2 | ColumnpktSwchNuiGroupIdS | read-write | current | The group Id for this NUI entry. |
| 1.3.6.1.4.1.164.8.1.3.1.1.3 | ColumnpktSwchNuiInPasswdS | read-write | current | The password for the incoming call. 15 chars. |
| 1.3.6.1.4.1.164.8.1.3.1.1.4 | ColumnpktSwchNuiOutPasswdPointerS | read-write | current | A pointer to the password in the OutPasswdTable for an outgoing call. |
| 1.3.6.1.4.1.164.8.1.3.1.1.5 | ColumnpktSwchNuiInAddrS | read-write | current | The addresss for the incoming call. 15 digits. |
| 1.3.6.1.4.1.164.8.1.3.1.1.6 | ColumnpktSwchNuiOutAddrPointerS | read-write | current | A pointer to the address in the OutAddrTable for an outgoing call. |
| 1.3.6.1.4.1.164.8.1.3.1.1.7 | ColumnpktSwchNuiStatusS | read-write | current | The status of this NUI table entry. The choices are those defined in the SNMPv2 Textual Conventions for RowStatus. This will allow easy replacement of the INTE… |
| 1.3.6.1.4.1.164.8.1.3.2 | TablepktSwchNuiATable | not-accessible | current | The NUI Table defines the NUIs that can be used by the device. |
| 1.3.6.1.4.1.164.8.1.3.2.1 | RowpktSwchNuiAEntry | not-accessible | current | Defines the contents of each line in the NUI Table. |
| 1.3.6.1.4.1.164.8.1.3.2.1.1 | ColumnpktSwchNuiIndexA | read-only | current | The index of this entry. |
| 1.3.6.1.4.1.164.8.1.3.2.1.2 | ColumnpktSwchNuiGroupIdA | read-only | current | The group Id for this NUI entry. |
| 1.3.6.1.4.1.164.8.1.3.2.1.3 | ColumnpktSwchNuiInPasswdA | read-only | current | The password for the incoming call. 15 chars. |
| 1.3.6.1.4.1.164.8.1.3.2.1.4 | ColumnpktSwchNuiOutPasswdPointerA | read-only | current | A pointer to the password in the OutPasswdTable for an outgoing call. |
| 1.3.6.1.4.1.164.8.1.3.2.1.5 | ColumnpktSwchNuiInAddrA | read-only | current | The addresss for the incoming call. 15 digits. |
| 1.3.6.1.4.1.164.8.1.3.2.1.6 | ColumnpktSwchNuiOutAddrPointerA | read-only | current | A pointer to the address in the OutAddrTable for an outgoing call. |
| 1.3.6.1.4.1.164.8.1.3.2.1.7 | ColumnpktSwchNuiStatusA | read-only | current | The status of this NUI table entry. The choices are those defined in the SNMPv2 Textual Conventions for RowStatus. This will allow easy replacement of the INTE… |
| 1.3.6.1.4.1.164.8.1.3.3 | TablepktSwchNuiOutPasswdSTable | not-accessible | current | The table defines the passwords that can be used by the device. |
| 1.3.6.1.4.1.164.8.1.3.3.1 | RowpktSwchNuiOutPasswdSEntry | not-accessible | current | Defines the contents of each line in OutPasswd Table. |
| 1.3.6.1.4.1.164.8.1.3.3.1.1 | ColumnpktSwchNuiOutPasswdIndexS | read-only | current | The index of this entry. |
| 1.3.6.1.4.1.164.8.1.3.3.1.2 | ColumnpktSwchNuiOutPasswdValueS | read-write | current | The password of this entry. 15 chars. |
| 1.3.6.1.4.1.164.8.1.3.3.1.3 | ColumnpktSwchNuiOutPasswdStatusS | read-write | current | The status of this NuiOutPasswd table entry. |
| 1.3.6.1.4.1.164.8.1.3.4 | TablepktSwchNuiOutPasswdATable | not-accessible | current | The table defines the passwords that can be used by the device. |
| 1.3.6.1.4.1.164.8.1.3.4.1 | RowpktSwchNuiOutPasswdAEntry | not-accessible | current | Defines the contents of each line in OutPasswd Table. |
| 1.3.6.1.4.1.164.8.1.3.4.1.1 | ColumnpktSwchNuiOutPasswdIndexA | read-only | current | The index of this entry. |
| 1.3.6.1.4.1.164.8.1.3.4.1.2 | ColumnpktSwchNuiOutPasswdValueA | read-only | current | The password of this entry. 15 chars. |
| 1.3.6.1.4.1.164.8.1.3.4.1.3 | ColumnpktSwchNuiOutPasswdStatusA | read-only | current | The status of this NuiOutPasswd table entry. |
| 1.3.6.1.4.1.164.8.1.3.5 | TablepktSwchNuiOutAddrSTable | not-accessible | current | The table defines the Addresses that can be used by the device. |
| 1.3.6.1.4.1.164.8.1.3.5.1 | RowpktSwchNuiOutAddrSEntry | not-accessible | current | Defines the contents of each line in OutAddr Table. |
| 1.3.6.1.4.1.164.8.1.3.5.1.1 | ColumnpktSwchNuiOutAddrIndexS | read-only | current | The index of this entry. |
| 1.3.6.1.4.1.164.8.1.3.5.1.2 | ColumnpktSwchNuiOutAddrValueS | read-write | current | The address of this entry. 15 digits. |
| 1.3.6.1.4.1.164.8.1.3.5.1.3 | ColumnpktSwchNuiOutAddrStatusS | read-write | current | The status of this NuiOutAddr table entry. |
| 1.3.6.1.4.1.164.8.1.3.6 | TablepktSwchNuiOutAddrATable | not-accessible | current | The table defines the Addresses that can be used by the device. |
| 1.3.6.1.4.1.164.8.1.3.6.1 | RowpktSwchNuiOutAddrAEntry | not-accessible | current | Defines the contents of each line in OutAddr Table. |
| 1.3.6.1.4.1.164.8.1.3.6.1.1 | ColumnpktSwchNuiOutAddrIndexA | read-only | current | The index of this entry. |
| 1.3.6.1.4.1.164.8.1.3.6.1.2 | ColumnpktSwchNuiOutAddrValueA | read-only | current | The address of this entry. 15 digits. |
| 1.3.6.1.4.1.164.8.1.3.6.1.3 | ColumnpktSwchNuiOutAddrStatusA | read-only | current | The status of this NuiOutAddr table entry. |
| 1.3.6.1.4.1.164.8.1.4 | NodepktSwchMng | |||
| 1.3.6.1.4.1.164.8.1.4.1 | TablepktSwchMngX25TrapIpTable | not-accessible | current | This table indicates the destination address of the traps. Internally it will be limited to ten addresses. |
| 1.3.6.1.4.1.164.8.1.4.1.1 | RowpktSwchMngX25Entry | not-accessible | current | An entry in table pktSwchMngX25TrapIpTable. |
| 1.3.6.1.4.1.164.8.1.4.1.1.1 | ColumnpktSwchMngID | read-only | current | This value indicates an index of a specific IP address |
| 1.3.6.1.4.1.164.8.1.4.1.1.2 | ColumnpktSwchMngIP | read-write | current | This value indicates the destination address of the traps. IP 0.0.0.0 removes the entry. |
| 1.3.6.1.4.1.164.8.1.4.1.1.3 | ColumnpktSwchMngPhyAddr | read-write | deprecated | This value indicates the physical destination address of the traps. |
| 1.3.6.1.4.1.164.8.1.4.1.1.4 | ColumnpktSwchTrapEnable | read-write | current | This value indicates which traps should be sent. The value is a sum of values (powers of two), where each value in the sum represents a trap that should be rep… |
| 1.3.6.1.4.1.164.8.1.4.1.1.5 | ColumnpktSwchEncapsulationMode | read-write | deprecated | Format type for IP over X25 |
| 1.3.6.1.4.1.164.8.1.5 | NodepktSwchXid | |||
| 1.3.6.1.4.1.164.8.1.5.1 | TablepktSwchXidSTable | not-accessible | current | The Exchange Id table contains a list of 13 incoming pairs of allowed dial-up phone numbers and passwords. Also included is one pair of outgoing phone number a… |
| 1.3.6.1.4.1.164.8.1.5.1.1 | RowpktSwchXidSEntry | not-accessible | current | An entry in table pktSwchXidSTable. |
| 1.3.6.1.4.1.164.8.1.5.1.1.1 | ColumnpktSwchXidIndexS | read-only | current | This Index of the XID table. |
| 1.3.6.1.4.1.164.8.1.5.1.1.2 | ColumnpktSwchXidInternalIndexS | read-only | current | An internal index for each XidIndex of the table. The first 13 entries refer to Incoming calls. The 14th entry refers to an Outgoing call. |
| 1.3.6.1.4.1.164.8.1.5.1.1.3 | ColumnpktSwchXidPasswdS | read-write | current | Password of size 16 chars. |
| 1.3.6.1.4.1.164.8.1.5.1.1.4 | ColumnpktSwchXidPhoneS | read-write | current | Phone number of size 16 digits. |
| 1.3.6.1.4.1.164.8.1.5.1.1.5 | ColumnpktSwchXidStatusS | read-write | current | The status of the XID table entry. The status applies to the XidIndex, i.e., setting the staus to invalid results in the removal of all the InternalIndex entri… |
| 1.3.6.1.4.1.164.8.1.5.2 | TablepktSwchXidATable | not-accessible | current | The Exchange Id table contains a list of 13 incoming pairs of allowed dial-up phone numbers and passwords. Also included is one pair of outgoing phone number a… |
| 1.3.6.1.4.1.164.8.1.5.2.1 | RowpktSwchXidAEntry | not-accessible | current | An entry in table pktSwchXidATable. |
| 1.3.6.1.4.1.164.8.1.5.2.1.1 | ColumnpktSwchXidIndexA | read-only | current | This Index of the XID table. |
| 1.3.6.1.4.1.164.8.1.5.2.1.2 | ColumnpktSwchXidInternalIndexA | read-only | current | An internal index for each XidIndex of the table. The first 13 entries refer to Incoming calls. The 14th entry refers to an Outgoing call. |
| 1.3.6.1.4.1.164.8.1.5.2.1.3 | ColumnpktSwchXidPasswdA | read-only | current | Password of size 16 chars. |
| 1.3.6.1.4.1.164.8.1.5.2.1.4 | ColumnpktSwchXidPhoneA | read-only | current | Phone number of size 16 digits. |
| 1.3.6.1.4.1.164.8.1.5.2.1.5 | ColumnpktSwchXidStatusA | read-only | current | The status of the XID table entry. The status applies to the XidIndex, i.e., setting the staus to invalid results in the removal of all the InternalIndex entri… |
| 1.3.6.1.4.1.164.8.1.6 | NodepktSwchIpRouting | |||
| 1.3.6.1.4.1.164.8.1.6.1 | TablepktSwchIpRoutSTable | not-accessible | current | The Scratch Routing Table defines the routes for incoming and outgoing ip datagrams on the device. |
| 1.3.6.1.4.1.164.8.1.6.1.1 | RowpktSwchIpRoutSEntry | not-accessible | current | Defines the contents of each line in the Scratch IP Routing Table. |
| 1.3.6.1.4.1.164.8.1.6.1.1.1 | ColumnpktSwchIpRoutIdS | read-only | current | Index of the pktSwchIpRoutSTable. |
| 1.3.6.1.4.1.164.8.1.6.1.1.2 | ColumnpktSwchIpRoutIpAddressS | read-write | current | The IP address to which the entry applies. A string of the format: X.X.X.X where every X is a number in the range 0-255. |
| 1.3.6.1.4.1.164.8.1.6.1.1.3 | ColumnpktSwchIpRoutIpMaskS | read-write | current | The IP mask to which the entry applies. A string of the format: X.X.X.X where every X is a number in the range 0-255. |
| 1.3.6.1.4.1.164.8.1.6.1.1.4 | ColumnpktSwchIpRoutDestProtocolS | read-write | deprecated | Destination protocol for the associated address. None(255) when not used |
| 1.3.6.1.4.1.164.8.1.6.1.1.5 | ColumnpktSwchIpRoutDestinationS | read-write | deprecated | Destination for the associated address. Possible values: Default : Not Used. X.25 PVC: Port:LCN or a pre defined PVC number X.25 SVC: X.25 Addr or cid followed… |
| 1.3.6.1.4.1.164.8.1.6.1.1.6 | ColumnpktSwchIpRoutInactivityS | read-write | deprecated | Inactivity time in steps of 50 mili seconds for X25 SVC protocol only. Range: 0..255. Default: 2. |
| 1.3.6.1.4.1.164.8.1.6.1.1.7 | ColumnpktSwchIpRoutStatusS | read-write | current | The status of this routing table entry. The choices are those defined in the SNMPv2 Textual Conventions for RowStatus. This will allow easy replacement of the … |
| 1.3.6.1.4.1.164.8.1.6.1.1.8 | ColumnpktSwchIpRoutMetricS | read-write | current | No. of hops for this route. The default value is 1. Legal values: 1 to the max no. of hops this device will support. The max no. is defined by pktSwchIpGlobalM… |
| 1.3.6.1.4.1.164.8.1.6.1.1.9 | ColumnpktSwchIpRoutNextHopS | read-write | current | IP address of the next hop. A string of the format: X.X.X.X where every X is a number in the range 0-255. |
| 1.3.6.1.4.1.164.8.1.6.1.1.10 | ColumnpktSwchIpRoutInterfaceIdS | read-write | current | ID of the logical IP interface in the pktSwchIpInterface table. The IP routing module will route the IP frame according to this interface ID. Legal values: 1 t… |
| 1.3.6.1.4.1.164.8.1.6.2 | TablepktSwchIpRoutATable | not-accessible | current | The Active Routing Table defines the active routes for incoming and outgoing ip datagrams on the device. |
| 1.3.6.1.4.1.164.8.1.6.2.1 | RowpktSwchIpRoutAEntry | not-accessible | current | Defines the contents of each line in the Active IP Routing Table. |
| 1.3.6.1.4.1.164.8.1.6.2.1.1 | ColumnpktSwchIpRoutIdA | read-only | current | Index of the IP pktSwchIpRoutATable. |
| 1.3.6.1.4.1.164.8.1.6.2.1.2 | ColumnpktSwchIpRoutIpAddressA | read-only | current | The IP address to which the entry applies. A string of the format: X.X.X.X where every X is a number in the range 0-255. |
| 1.3.6.1.4.1.164.8.1.6.2.1.3 | ColumnpktSwchIpRoutIpMaskA | read-only | current | The IP mask to which the entry applies. A string of the format: X.X.X.X where every X is a number in the range 0-255. |
| 1.3.6.1.4.1.164.8.1.6.2.1.4 | ColumnpktSwchIpRoutDestProtocolA | read-only | deprecated | Destination protocol for the associated address. None(255) when not used. |
| 1.3.6.1.4.1.164.8.1.6.2.1.5 | ColumnpktSwchIpRoutDestinationA | read-only | deprecated | Destination for the associated address. Possible values: Default : Not Used. X.25 PVC: Port:LCN or a pre defined PVC number X.25 SVC: X.25 Addr or cid followed… |
| 1.3.6.1.4.1.164.8.1.6.2.1.6 | ColumnpktSwchIpRoutInactivityA | read-only | deprecated | Inactivity time in steps of 50 mili seconds for X25 SVC protocol only. Range: 0..255. Default: 2. |
| 1.3.6.1.4.1.164.8.1.6.2.1.7 | ColumnpktSwchIpRoutBuffsInA | read-only | current | The number of packets in the Input buffer link list, received but not routed yet. |
| 1.3.6.1.4.1.164.8.1.6.2.1.8 | ColumnpktSwchIpRoutBuffsOutA | read-only | current | The number of packets in the Output buffer link list, routed but not sent yet. |
| 1.3.6.1.4.1.164.8.1.6.2.1.9 | ColumnpktSwchIpRoutFCA | read-only | current | This is the flow control status of this ip routing entry\connection |
| 1.3.6.1.4.1.164.8.1.6.2.1.10 | ColumnpktSwchIpRoutMetricA | read-only | current | No. of hops for this route. The default value is 1. Legal values: 1 to the max no. of hops this device will support. The max no. is defined by pktSwchIpGlobalM… |
| 1.3.6.1.4.1.164.8.1.6.2.1.11 | ColumnpktSwchIpRoutNextHopA | read-only | current | IP address of the next hop. A string of the format: X.X.X.X where every X is a number in the range 0-255. |
| 1.3.6.1.4.1.164.8.1.6.2.1.12 | ColumnpktSwchIpRoutInterfaceIdA | read-only | current | ID of the logical IP interface in the pktSwchIpInterface table. The IP routing module will route the IP frame according to this interface ID. Legal values: 1 t… |
| 1.3.6.1.4.1.164.8.1.7 | NodepktSwchPriority | |||
| 1.3.6.1.4.1.164.8.1.7.1 | ScalarpktSwchTxPriorityStatus | read-write | current | The status of the Priorities table. Used for saving the Priority parameters. |
| 1.3.6.1.4.1.164.8.1.7.2 | TablepktSwchTxPriorityTable | not-accessible | current | The Tx Priorities table. |
| 1.3.6.1.4.1.164.8.1.7.2.1 | RowpktSwchTxPriorityEntry | not-accessible | current | The Tx Priority Entry defines the max delay time and max queue length for each Priority level. |
| 1.3.6.1.4.1.164.8.1.7.2.1.1 | ColumnpktSwchTxPriorityLevel | read-only | current | Level of an entry in the Tx Priority Table. At present, the PS supports 4 priority levels. Default level: 1 |
| 1.3.6.1.4.1.164.8.1.7.2.1.2 | ColumnpktSwchTxPriorityMaxDelayTime | read-write | current | Max delay time in Tx queue (in 100 msec intervals). Each frame will wait no more than the Max delay time until it is handled. 0 means that the delay is Unlimit… |
| 1.3.6.1.4.1.164.8.1.7.2.1.3 | ColumnpktSwchTxPriorityMaxQueueLen | read-write | current | Max allowed length of the Tx queue. Frames will be discarded if the length is exceeded. 0 means that the queue is of Unlimited length. Default value: 0 |
| 1.3.6.1.4.1.164.8.2 | NodepktSwchAsync | |||
| 1.3.6.1.4.1.164.8.2.1 | NodepktSwchProfile | |||
| 1.3.6.1.4.1.164.8.2.1.1 | TablepktSwchProfileSTable | not-accessible | current | The Profile Table S defines the Scratch profiles that the PS can use to configure a channel. |
| 1.3.6.1.4.1.164.8.2.1.1.1 | RowpktSwchProfileSEntry | not-accessible | current | Defines the contents of each line in the Profile Table S. |
| 1.3.6.1.4.1.164.8.2.1.1.1.1 | ColumnpktSwchProfileNumberS | read-only | current | The number by which a profile is identified. This is also used as the index for the profile table. The maximum profile number is 200. |
| 1.3.6.1.4.1.164.8.2.1.1.1.2 | ColumnpktSwchProfileRecallCharS | read-write | current | The character specified by this entry is used to escape from the data transfer mode and enter the PAD command mode. The integer values have the following meani… |
| 1.3.6.1.4.1.164.8.2.1.1.1.3 | ColumnpktSwchProfileEchoS | read-write | current | This determines if an echo of the input characters is retured to the DTE. The options are either 'echo enabled' or 'no echo'. |
| 1.3.6.1.4.1.164.8.2.1.1.1.4 | ColumnpktSwchProfileDataForwCharS | read-write | current | The value is a sum of values (powers of two), where each value in the sum represents a character (or characters) that is (are) used as a data forwarding charac… |
| 1.3.6.1.4.1.164.8.2.1.1.1.5 | ColumnpktSwchProfileIdleTimerS | read-write | current | Packets will be forwarded when the idle timer expires. The idle time interval is specified as a multiple of 50 milliseconds. The multiple is given by the param… |
| 1.3.6.1.4.1.164.8.2.1.1.1.6 | ColumnpktSwchProfileDevFlowContS | read-write | current | This parameter determines whether or not the PAD uses software flow control for the attached device. The options are either (1) PAD uses flow control during da… |
| 1.3.6.1.4.1.164.8.2.1.1.1.7 | ColumnpktSwchProfileServSigS | read-write | current | This parameter is used to instruct the PAD whether to transfer PAD service signals and the PAD prompt to the local DTE in standard format. The options are (1) … |
| 1.3.6.1.4.1.164.8.2.1.1.1.8 | ColumnpktSwchProfileBreakS | read-write | current | The value is a sum of values (powers of two), where each value in the sum represents a PAD operation on receipt of the break signal from the DTE. The values th… |
| 1.3.6.1.4.1.164.8.2.1.1.1.9 | ColumnpktSwchProfileDiscOutS | read-only | current | This parameter instructs the PAD whether to forward the user sequences included in data packets to the local DTE or discard them. The options are (1) discard o… |
| 1.3.6.1.4.1.164.8.2.1.1.1.10 | ColumnpktSwchProfileCRPaddingS | read-write | current | This parameter specifies the number of padding characters to be added after a carriage return character is transmitted to the local DTE. |
| 1.3.6.1.4.1.164.8.2.1.1.1.11 | ColumnpktSwchProfileLineFoldS | read-write | current | This parameter specifies the maximum number of characters to be inserted before the format effector. If the value is zero, there is no insertion of a format ef… |
| 1.3.6.1.4.1.164.8.2.1.1.1.12 | ColumnpktSwchProfileSpeedS | read-write | current | This parameter determines the rate of data transmission to and from the DTE. |
| 1.3.6.1.4.1.164.8.2.1.1.1.13 | ColumnpktSwchProfilePadFlowContS | read-write | current | This determines whether or not the terminal can exercise flow control over the PAD. The options are either 'device can exercise flow control' or 'device cannot… |
| 1.3.6.1.4.1.164.8.2.1.1.1.14 | ColumnpktSwchProfileLineFeedInsertS | read-write | current | This parameter indicates when there is a line feed insertion after CR. The options are (1) Insert line feed after transmission of CR to the DTE, (2) Insert lin… |
| 1.3.6.1.4.1.164.8.2.1.1.1.15 | ColumnpktSwchProfileLineFeedPadS | read-write | current | This parameter specifies the number of padding characters to be added after a line feed. |
| 1.3.6.1.4.1.164.8.2.1.1.1.16 | ColumnpktSwchProfileEditingS | read-write | current | This parameter specifies the editing capabilities available in the data transfer mode. Editing is always possible when the PAD is in the command mode. The opti… |
| 1.3.6.1.4.1.164.8.2.1.1.1.17 | ColumnpktSwchProfileCharDelS | read-write | current | This parameter specifies the character delete, which is one character from IA5. The default selection is 127 (character DEL). |
| 1.3.6.1.4.1.164.8.2.1.1.1.18 | ColumnpktSwchProfileLineDelS | read-write | current | This parameter specifies the line delete (last line stored in the edit buffer), which is one character from IA5. The default selection is 24 (character CAN). |
| 1.3.6.1.4.1.164.8.2.1.1.1.19 | ColumnpktSwchProfileLineDispS | read-write | current | This entry specifies the line display character, which is one character from IA5. The default selection is 18 (character DC2). |
| 1.3.6.1.4.1.164.8.2.1.1.1.20 | ColumnpktSwchProfileEditServSigS | read-write | current | This entry specifies the editing PAD service signals. The integer values have the following meanings: (0) No editing PAD service signals (1) Editing PAD servic… |
| 1.3.6.1.4.1.164.8.2.1.1.1.21 | ColumnpktSwchProfileEchomaskS | read-write | current | The value is a sum of values (powers of two), where each value in the sum represents a character (or characters) that is (are) included in the echo mask. The c… |
| 1.3.6.1.4.1.164.8.2.1.1.1.22 | ColumnpktSwchProfileParTreatS | read-write | current | This entry controls the generation of parity bits in the data sent to the local DTE and the checking of the parity bit when generated by the local DTE. The opt… |
| 1.3.6.1.4.1.164.8.2.1.1.1.23 | ColumnpktSwchProfilePageWaitS | read-write | current | This entry specifies the number of line feed characters counted by the PAD before the page wait condition is entered. If the value is zero, page wait is disabl… |
| 1.3.6.1.4.1.164.8.2.1.1.1.24 | ColumnpktSwchProfileBitsPerCharS | read-write | current | The number of data bits per character supported by the PAD. |
| 1.3.6.1.4.1.164.8.2.1.1.1.25 | ColumnpktSwchProfileDvParityS | read-write | current | This entry selects the type of parity to be checked and or generated by the PAD when radSPSProfileParTreat is a value other than 255. The options are (1) space… |
| 1.3.6.1.4.1.164.8.2.1.1.1.26 | ColumnpktSwchProfileStopBitsS | read-write | current | This entry indicates the number of stop bits per character supported by the PAD. The options are either (1) one stop bit, (2) two stop bits, or (3) 1.5 stop bi… |
| 1.3.6.1.4.1.164.8.2.1.1.1.27 | ColumnpktSwchProfileSpecFlowS | read-write | current | This entry is used to define additional flow control possiblilites. The options are either (1) Flow control by means of the terminal DTR line or (2) No special… |
| 1.3.6.1.4.1.164.8.2.1.1.1.28 | ColumnpktSwchProfileCountFwdS | read-write | current | This entry can be used to instruct the PAD to complete the assembly of a packet and to forward it after the specifed number of characters has been received. If… |
| 1.3.6.1.4.1.164.8.2.1.1.1.29 | ColumnpktSwchProfileEscDelayS | read-write | current | This entry can be used to instruct the PAD whether to delay the forwarding of a data packet when an escape character is detected in the data stream and to dete… |
| 1.3.6.1.4.1.164.8.2.1.1.1.30 | ColumnpktSwchProfileCharBreakS | read-write | current | This entry specifies the decimal value of the character that will be interpreted as an additional break signal by the PAD. A value of zero indicates no break c… |
| 1.3.6.1.4.1.164.8.2.1.1.1.31 | ColumnpktSwchProfileCharSuppressS | read-write | current | This entry specifies the decimal value of the character that will toggle echo suppression in the PAD. A value of zero indicates that echo suppression is only c… |
| 1.3.6.1.4.1.164.8.2.1.1.1.32 | ColumnpktSwchProfileCharSubsS | read-write | current | This entry specifies the decimal value of the character that will be echoed instead of the character received from the user's DTE. A zero value indicates that … |
| 1.3.6.1.4.1.164.8.2.1.1.1.33 | ColumnpktSwchProfileFormFeedPadS | read-write | current | This entry specifies the number of padding (NUL) characters that will be automatically sent after the form feed character. |
| 1.3.6.1.4.1.164.8.2.1.1.1.34 | ColumnpktSwchProfileInactivityS | read-write | current | This entry specifies the number of minutes after which the PAD will forward the accumulated data and clear the call. A zero value indicates no disconnection on… |
| 1.3.6.1.4.1.164.8.2.1.1.1.35 | ColumnpktSwchProfileOptionsS | read-write | current | This entry defines several options to control the profile. The value is a sum of values (powers of two), where each value in the sum represents an option . The… |
| 1.3.6.1.4.1.164.8.2.1.1.1.36 | ColumnpktSwchProfileClrTimerS | read-write | current | This entry specifies the number of minutes after which a call is cleared. If the parameter value is 0, there is no disconnection timer. |
| 1.3.6.1.4.1.164.8.2.1.1.1.37 | ColumnpktSwchProfileSubAddInCUDS | read-write | current | This entry defines the number of digits for the subaddress in CUD. |
| 1.3.6.1.4.1.164.8.2.1.1.1.38 | ColumnpktSwchProfileStatusS | read-write | current | The status of this profile. The choices are those defined in the SNMPv2 Textual Conventions for RowStatus. This will allow easy replacement of the INTEGER synt… |
| 1.3.6.1.4.1.164.8.2.1.1.1.39 | ColumnpktSwchProfileIncomingMsgS | read-write | current | This object enables the asynchronous user to change the 'com' message for Incoming calls to a string of up to 20 characters. If user selects the value xxx for … |
| 1.3.6.1.4.1.164.8.2.1.1.1.40 | ColumnpktSwchProfileOutgoingMsgS | read-write | current | This object enables the asynchronous user to change the 'com' message for Outgoing calls to a string of up to 20 characters. If user selects the value xxx for … |
| 1.3.6.1.4.1.164.8.2.1.1.1.41 | ColumnpktSwchProfileClearMsgS | read-write | current | This object enables the user to edit a message, which will appear when the channel is cleared. The message is a string of up to 20 characters. Example of such … |
| 1.3.6.1.4.1.164.8.2.1.2 | TablepktSwchProfileATable | not-accessible | current | The Profile Table defines the profiles that the PS can use to configure a channel. |
| 1.3.6.1.4.1.164.8.2.1.2.1 | RowpktSwchProfileAEntry | not-accessible | current | Defines the contents of each line in the Profile Table. |
| 1.3.6.1.4.1.164.8.2.1.2.1.1 | ColumnpktSwchProfileNumberA | read-only | current | The number by which a profile is identified. This is also used as the index for the profile table. The maximum profile number is 200. |
| 1.3.6.1.4.1.164.8.2.1.2.1.2 | ColumnpktSwchProfileRecallCharA | read-only | current | The character specified by this entry is used to escape from the data transfer mode and enter the PAD command mode. The integer values have the following meani… |
| 1.3.6.1.4.1.164.8.2.1.2.1.3 | ColumnpktSwchProfileEchoA | read-only | current | This determines if an echo of the input characters is retured to the DTE. The options are either 'echo enabled' or 'no echo'. |
| 1.3.6.1.4.1.164.8.2.1.2.1.4 | ColumnpktSwchProfileDataForwCharA | read-only | current | The value is a sum of values (powers of two), where each value in the sum represents a character (or characters) that is (are) used as a data forwarding charac… |
| 1.3.6.1.4.1.164.8.2.1.2.1.5 | ColumnpktSwchProfileIdleTimerA | read-only | current | Packets will be forwarded when the idle timer expires. The idle time interval is specified as a multiple of 50 milliseconds. The multiple is given by the param… |
| 1.3.6.1.4.1.164.8.2.1.2.1.6 | ColumnpktSwchProfileDevFlowContA | read-only | current | This parameter determines whether or not the PAD uses software flow control for the attached device. The options are either (1) PAD uses flow control during da… |
| 1.3.6.1.4.1.164.8.2.1.2.1.7 | ColumnpktSwchProfileServSigA | read-only | current | This parameter is used to instruct the PAD whether to transfer PAD service signals and the PAD prompt to the local DTE in standard format. The options are (1) … |
| 1.3.6.1.4.1.164.8.2.1.2.1.8 | ColumnpktSwchProfileBreakA | read-only | current | The value is a sum of values (powers of two), where each value in the sum represents a PAD operation on receipt of the break signal from the DTE. The values th… |
| 1.3.6.1.4.1.164.8.2.1.2.1.9 | ColumnpktSwchProfileDiscOutA | read-only | current | This parameter instructs the PAD whether to forward the user sequences included in data packets to the local DTE or discard them. The options are (1) discard o… |
| 1.3.6.1.4.1.164.8.2.1.2.1.10 | ColumnpktSwchProfileCRPaddingA | read-only | current | This parameter specifies the number of padding characters to be added after a carriage return character is transmitted to the local DTE. |
| 1.3.6.1.4.1.164.8.2.1.2.1.11 | ColumnpktSwchProfileLineFoldA | read-only | current | This parameter specifies the maximum number of characters to be inserted before the format effector. If the value is zero, there is no insertion of a format ef… |
| 1.3.6.1.4.1.164.8.2.1.2.1.12 | ColumnpktSwchProfileSpeedA | read-only | current | This parameter determines the rate of data transmission to and from the DTE. |
| 1.3.6.1.4.1.164.8.2.1.2.1.13 | ColumnpktSwchProfilePadFlowContA | read-only | current | This determines whether or not the terminal can exercise flow control over the PAD. The options are either 'device can exercise flow control' or 'device cannot… |
| 1.3.6.1.4.1.164.8.2.1.2.1.14 | ColumnpktSwchProfileLineFeedInsertA | read-only | current | This parameter indicates when there is a line feed insertion after CR. The options are (1) Insert line feed after transmission of CR to the DTE, (2) Insert lin… |
| 1.3.6.1.4.1.164.8.2.1.2.1.15 | ColumnpktSwchProfileLineFeedPadA | read-only | current | This parameter specifies the number of padding characters to be added after a line feed. |
| 1.3.6.1.4.1.164.8.2.1.2.1.16 | ColumnpktSwchProfileEditingA | read-only | current | This parameter specifies the editing capabilities available in the data transfer mode. Editing is always possible when the PAD is in the command mode. The opti… |
| 1.3.6.1.4.1.164.8.2.1.2.1.17 | ColumnpktSwchProfileCharDelA | read-only | current | This parameter specifies the character delete, which is one character from IA5. The default selection is 127 (character DEL). |
| 1.3.6.1.4.1.164.8.2.1.2.1.18 | ColumnpktSwchProfileLineDelA | read-only | current | This parameter specifies the line delete, which is one character from IA5. The default selection is 24 (character CAN). |
| 1.3.6.1.4.1.164.8.2.1.2.1.19 | ColumnpktSwchProfileLineDispA | read-only | current | This entry specifies the line display character, which is one character from IA5. The default selection is 18 (character DC2). |
| 1.3.6.1.4.1.164.8.2.1.2.1.20 | ColumnpktSwchProfileEditServSigA | read-only | current | This entry specifies the editing PAD service signals. The integer values have the following meanings: (0) No editing PAD service signals (1) Editing PAD servic… |
| 1.3.6.1.4.1.164.8.2.1.2.1.21 | ColumnpktSwchProfileEchomaskA | read-only | current | The value is a sum of values (powers of two), where each value in the sum represents a character (or characters) that is (are) included in the echo mask. The c… |
| 1.3.6.1.4.1.164.8.2.1.2.1.22 | ColumnpktSwchProfileParTreatA | read-only | current | This entry controls the generation of parity bits in the data sent to the local DTE and the checking of the parity bit when generated by the local DTE. The opt… |
| 1.3.6.1.4.1.164.8.2.1.2.1.23 | ColumnpktSwchProfilePageWaitA | read-only | current | This entry specifies the number of line feed characters counted by the PAD before the page wait condition is entered. If the value is zero, page wait is disabl… |
| 1.3.6.1.4.1.164.8.2.1.2.1.24 | ColumnpktSwchProfileBitsPerCharA | read-only | current | The number of data bits per character supported by the PAD. |
| 1.3.6.1.4.1.164.8.2.1.2.1.25 | ColumnpktSwchProfileDvParityA | read-only | current | This entry selects the type of parity to be checked and or generated by the PAD when radSPSProfileParTreat is a value other than 255. The options are (1) space… |
| 1.3.6.1.4.1.164.8.2.1.2.1.26 | ColumnpktSwchProfileStopBitsA | read-only | current | This entry indicates the number of stop bits per character supported by the PAD. The options are either (1) one stop bit, (2) two stop bits, or (3) 1.5 stop bi… |
| 1.3.6.1.4.1.164.8.2.1.2.1.27 | ColumnpktSwchProfileSpecFlowA | read-only | current | This entry is used to define additional flow control possiblilites. The options are either (1) Flow control by means fo the terminal DTR line or (2) No special… |
| 1.3.6.1.4.1.164.8.2.1.2.1.28 | ColumnpktSwchProfileCountFwdA | read-only | current | This entry can be used to instruct the PAD to complete the assembly of a packet and to forward it after the specifed number of characters has been received. If… |
| 1.3.6.1.4.1.164.8.2.1.2.1.29 | ColumnpktSwchProfileEscDelayA | read-only | current | This entry can be used to instruct the PAD whether to delay the forwarding of a data packet when an escape character is detected in the data stream and to dete… |
| 1.3.6.1.4.1.164.8.2.1.2.1.30 | ColumnpktSwchProfileCharBreakA | read-only | current | This entry specifies the decimal value of the character that will be interpreted as an additional break signal by the PAD. A value of zero indicates no break c… |
| 1.3.6.1.4.1.164.8.2.1.2.1.31 | ColumnpktSwchProfileCharSuppressA | read-only | current | This entry specifies the decimal value of the character that will toggle echo suppression in the PAD. A value of zero indicates that echo suppression is only c… |
| 1.3.6.1.4.1.164.8.2.1.2.1.32 | ColumnpktSwchProfileCharSubsA | read-only | current | This entry specifies the decimal value of the character that will be echoed instead of the character received from the user's DTE. A zero value indicates that … |
| 1.3.6.1.4.1.164.8.2.1.2.1.33 | ColumnpktSwchProfileFormFeedPadA | read-only | current | This entry specifies the number of padding (NUL) characters that will be automatically sent after the form feed character. |
| 1.3.6.1.4.1.164.8.2.1.2.1.34 | ColumnpktSwchProfileInactivityA | read-only | current | This entry specifies the number of minutes after which the PAD will forward the accumulated data and clear the call. A zero value indicates no disconnection on… |
| 1.3.6.1.4.1.164.8.2.1.2.1.35 | ColumnpktSwchProfileOptionsA | read-only | current | This entry defines several options to control the profile. The value is a sum of values (powers of two), where each value in the sum represents an option . The… |
| 1.3.6.1.4.1.164.8.2.1.2.1.36 | ColumnpktSwchProfileClrTimerA | read-only | current | This entry specifies the number of minutes after which a call is cleared. If the parameter value is 0, there is no disconnection timer. |
| 1.3.6.1.4.1.164.8.2.1.2.1.37 | ColumnpktSwchProfileSubAddInCUDA | read-only | current | This entry defines the number of digits for the subaddress in CUD. |
| 1.3.6.1.4.1.164.8.2.1.2.1.38 | ColumnpktSwchProfileIncomingMsgA | read-only | current | This object is used by an asynchronous user to change the 'com' message for Incoming calls to a string of up to 20 characters. If user selects the value xxx fo… |
| 1.3.6.1.4.1.164.8.2.1.2.1.39 | ColumnpktSwchProfileOutgoingMsgA | read-only | current | This object is used by an asynchronous user to change the 'com' message for Outgoing calls to a string of up to 20 characters. If user selects the value xxx fo… |
| 1.3.6.1.4.1.164.8.2.1.2.1.40 | ColumnpktSwchProfileClearMsgA | read-only | current | This object is the message selected by user, which will appear when the channel is cleared. The message is a string of up to 20 characters. Example of such a s… |
| 1.3.6.1.4.1.164.8.2.2 | NodepktSwchChannel | |||
| 1.3.6.1.4.1.164.8.2.2.1 | TablepktSwchChannelSTable | not-accessible | current | The Scratch Channel Table defines the channels configured on the PS. |
| 1.3.6.1.4.1.164.8.2.2.1.1 | RowpktSwchChannelSEntry | not-accessible | current | Defines the contents of each line in the Scratch Channel Table. |
| 1.3.6.1.4.1.164.8.2.2.1.1.1 | ColumnpktSwchChannelIfIndexS | read-only | current | This is used as the index for the channel table. |
| 1.3.6.1.4.1.164.8.2.2.1.1.2 | ColumnpktSwchChannelNumberS | read-only | current | The number by which a channel is identified. |
| 1.3.6.1.4.1.164.8.2.2.1.1.3 | ColumnpktSwchChannelProfileS | read-write | current | The profile that the channel uses for command mode operations. |
| 1.3.6.1.4.1.164.8.2.2.1.1.4 | ColumnpktSwchChannelOutCallProfileS | read-write | current | The number of the profile that will be used during an outgoing call on the channel. |
| 1.3.6.1.4.1.164.8.2.2.1.1.5 | ColumnpktSwchChannelInCallProfileS | read-write | current | The number of the profile that will be used during an incoming call on the channel. |
| 1.3.6.1.4.1.164.8.2.2.1.1.6 | ColumnpktSwchChannelRemoteProfileS | read-write | current | The number of the profile that will be downloaded to the remote PAD at the beginning of a new call. |
| 1.3.6.1.4.1.164.8.2.2.1.1.7 | ColumnpktSwchChannelAutocallIdS | read-write | current | Selects the mnemonic (call ID) to be used as the first alternative. A value of zero indicates that the autocall function is disabled. |
| 1.3.6.1.4.1.164.8.2.2.1.1.8 | ColumnpktSwchChannelAlterAutocallIdS | read-write | current | Selects the alternate mnemonic for the autocall function. A value of zero indicates that the alternate destination is not used. |
| 1.3.6.1.4.1.164.8.2.2.1.1.9 | ColumnpktSwchChannelAutocallRetriesS | read-write | current | The number of autocall retries if the autocall setup request is rejected with a busy cause. |
| 1.3.6.1.4.1.164.8.2.2.1.1.10 | ColumnpktSwchChannelAutocallIntervalS | read-write | current | The interval in seconds between consecutive autocall retries. |
| 1.3.6.1.4.1.164.8.2.2.1.1.11 | ColumnpktSwchChannelCallAliasS | read-write | current | The alias to be sent after the call is set up. A value of zero indicates that alias sending is disabled. The aliases are configured on the Alias Table. |
| 1.3.6.1.4.1.164.8.2.2.1.1.12 | ColumnpktSwchChannelSubAddress1S | read-write | current | The first subaddress for the channel. |
| 1.3.6.1.4.1.164.8.2.2.1.1.13 | ColumnpktSwchChannelSubAddress2S | read-write | current | The second subaddress for the channel. |
| 1.3.6.1.4.1.164.8.2.2.1.1.14 | ColumnpktSwchChannelNUISEntry | read-write | current | The number corresponding to the NUI information to be sent. This number is the same as the pktSwchNuiGroupId. |
| 1.3.6.1.4.1.164.8.2.2.1.1.15 | ColumnpktSwchChannelClearTimerS | read-write | current | Time limitation for an open session. A value of zero indicates that the Clear timer is not used. |
| 1.3.6.1.4.1.164.8.2.2.1.1.16 | ColumnpktSwchChannelOptionsS | read-write | current | This controls the use of gneral non-correlated channel options. The value is a sum of values (powers of two), where each value in the sum represents an option.… |
| 1.3.6.1.4.1.164.8.2.2.1.1.17 | ColumnpktSwchChannelClear | read-write | current | The Clearing Channel operation disconnects all sessions |
| 1.3.6.1.4.1.164.8.2.2.1.1.18 | ColumnpktSwchChannelCopyTo | read-write | current | The destination channel number, to which the Copy is performed. |
| 1.3.6.1.4.1.164.8.2.2.1.1.19 | ColumnpktSwchChannelCopyToWMask | read-write | current | The destination channel number, to which the Copy with Mask is performed. |
| 1.3.6.1.4.1.164.8.2.2.1.1.20 | ColumnpktSwchChannelCopyMask | read-write | current | The selected configuration parameters to be copied from the source channel to the target channels. The value is a sum of values (powers of two), where each val… |
| 1.3.6.1.4.1.164.8.2.2.2 | TablepktSwchChannelATable | not-accessible | current | The Active Channel Table defines the channels configured on the PS. |
| 1.3.6.1.4.1.164.8.2.2.2.1 | RowpktSwchChannelAEntry | not-accessible | current | Defines the contents of each line in the Active Channel Table. |
| 1.3.6.1.4.1.164.8.2.2.2.1.1 | ColumnpktSwchChannelIfIndexA | read-only | current | This is used as the index for the channel table. |
| 1.3.6.1.4.1.164.8.2.2.2.1.2 | ColumnpktSwchChannelNumberA | read-only | current | The number by which a channel is identified. |
| 1.3.6.1.4.1.164.8.2.2.2.1.3 | ColumnpktSwchChannelProfileA | read-only | current | The profile that the channel uses for command mode operations. |
| 1.3.6.1.4.1.164.8.2.2.2.1.4 | ColumnpktSwchChannelOutCallProfileA | read-only | current | The number of the profile that is used during an outgoing call on the channel. |
| 1.3.6.1.4.1.164.8.2.2.2.1.5 | ColumnpktSwchChannelInCallProfileA | read-only | current | The number of the profile that is used during an incoming call on the channel. |
| 1.3.6.1.4.1.164.8.2.2.2.1.6 | ColumnpktSwchChannelRemoteProfileA | read-only | current | The number of the profile that is downloaded to the remote PAD at the beginning of a new call. |
| 1.3.6.1.4.1.164.8.2.2.2.1.7 | ColumnpktSwchChannelAutocallIdA | read-only | current | Selects the mnemonic (call ID) to be used as the first alternative. A value of zero indicates that the autocall function is disabled. |
| 1.3.6.1.4.1.164.8.2.2.2.1.8 | ColumnpktSwchChannelAlterAutocallIdA | read-only | current | Selects the alternate mnemonic for the autocall function. A value of zero indicates that the alternate destination is not used. |
| 1.3.6.1.4.1.164.8.2.2.2.1.9 | ColumnpktSwchChannelAutocallRetriesA | read-only | current | The number of autocall retrues if the autocall setup request is rejected with a busy cause. |
| 1.3.6.1.4.1.164.8.2.2.2.1.10 | ColumnpktSwchChannelAutocallIntervalA | read-only | current | The interval in seconds between consecutive autocall retries. |
| 1.3.6.1.4.1.164.8.2.2.2.1.11 | ColumnpktSwchChannelCallAliasA | read-only | current | The alias to be sent after the call is set up. A value of zero indicates that alias sending is disabled. The aliases are configured on the Alias Table. |
| 1.3.6.1.4.1.164.8.2.2.2.1.12 | ColumnpktSwchChannelSubAddress1A | read-only | current | The first subaddress for the channel. |
| 1.3.6.1.4.1.164.8.2.2.2.1.13 | ColumnpktSwchChannelSubAddress2A | read-only | current | The second subaddress for the channel. |
| 1.3.6.1.4.1.164.8.2.2.2.1.14 | ColumnpktSwchChannelNUIAEntry | read-only | current | The number corresponding to the NUI information to be sent. This number is the same as the pktSwchNuiIndex. |
| 1.3.6.1.4.1.164.8.2.2.2.1.15 | ColumnpktSwchChannelClearTimerA | read-only | current | Time limitation for an open session. A value of zero indicates that the Clear timer is not used. |
| 1.3.6.1.4.1.164.8.2.2.2.1.16 | ColumnpktSwchChannelOptionsA | read-only | current | This controls the use of general non-correlated channel options. The value is a sum of values (powers of two), where each value in the sum represents an option… |
| 1.3.6.1.4.1.164.8.2.3 | NodepktSwchCallId | |||
| 1.3.6.1.4.1.164.8.2.3.1 | TablepktSwchCallIdSTable | not-accessible | current | The Call ID Table S defines the Scratch Call IDs configured on the device. |
| 1.3.6.1.4.1.164.8.2.3.1.1 | RowpktSwchCallIdSEntry | not-accessible | current | Defines the contents of each line in the Scratch CallId Table. |
| 1.3.6.1.4.1.164.8.2.3.1.1.1 | ColumnpktSwchCallIdNumberS | read-only | current | The index of this entry. |
| 1.3.6.1.4.1.164.8.2.3.1.1.2 | ColumnpktSwchCallIdMnemonicS | read-write | current | The mnemonic for this call ID. |
| 1.3.6.1.4.1.164.8.2.3.1.1.3 | ColumnpktSwchCallIdAddressS | read-write | current | The address for this call ID. |
| 1.3.6.1.4.1.164.8.2.3.1.1.4 | ColumnpktSwchCallIdStatusS | read-write | current | The status of this Call ID table entry. The choices are those defined in the SNMPv2 Textual Conventions for RowStatus. This will allow easy replacement of the … |
| 1.3.6.1.4.1.164.8.2.3.2 | TablepktSwchCallIdATable | not-accessible | current | The Call ID Table A defines the Active Call IDs configured on the device. |
| 1.3.6.1.4.1.164.8.2.3.2.1 | RowpktSwchCallIdAEntry | not-accessible | current | Defines the contents of each line in the Active CallId Table. |
| 1.3.6.1.4.1.164.8.2.3.2.1.1 | ColumnpktSwchCallIdNumberA | read-only | current | The index of this entry. |
| 1.3.6.1.4.1.164.8.2.3.2.1.2 | ColumnpktSwchCallIdMnemonicA | read-only | current | The mnemonic for this call ID. |
| 1.3.6.1.4.1.164.8.2.3.2.1.3 | ColumnpktSwchCallIdAddressA | read-only | current | The address for this call ID. |
| 1.3.6.1.4.1.164.8.2.4 | NodepktSwchAlias | |||
| 1.3.6.1.4.1.164.8.2.4.1 | TablepktSwchAliasSTable | not-accessible | current | The Alias Table defines the aliases configured on the device. |
| 1.3.6.1.4.1.164.8.2.4.1.1 | RowpktSwchAliasSEntry | not-accessible | current | Defines the contents of each line in the Alias Table. |
| 1.3.6.1.4.1.164.8.2.4.1.1.1 | ColumnpktSwchAliasNumberS | read-only | current | The index of this entry. |
| 1.3.6.1.4.1.164.8.2.4.1.1.2 | ColumnpktSwchAliasValueS | read-write | current | The alias is defined using up to 64 characters. |
| 1.3.6.1.4.1.164.8.2.4.1.1.3 | ColumnpktSwchAliasStatusS | read-write | current | The status of this Alias table entry. The choices are those defined in the SNMPv2 Textual Conventions for RowStatus. This will allow easy replacement of the IN… |
| 1.3.6.1.4.1.164.8.2.4.2 | TablepktSwchAliasATable | not-accessible | current | The Alias Table defines the aliases configured on the device. |
| 1.3.6.1.4.1.164.8.2.4.2.1 | RowpktSwchAliasAEntry | not-accessible | current | Defines the contents of each line in the Alias Table. |
| 1.3.6.1.4.1.164.8.2.4.2.1.1 | ColumnpktSwchAliasNumberA | read-only | current | The index of this entry. |
| 1.3.6.1.4.1.164.8.2.4.2.1.2 | ColumnpktSwchAliasValueA | read-only | current | The alias is defined using up to 64 characters. |
| 1.3.6.1.4.1.164.8.2.5 | TablepktSwchAsyncStatTable | not-accessible | current | The AsyncStat Table includes status information and statistics provided by the PS on the async channels. |
| 1.3.6.1.4.1.164.8.2.5.1 | RowpktSwchAsyncStatEntry | not-accessible | current | Defines the contents of each line in the Async Stat Table. |
| 1.3.6.1.4.1.164.8.2.5.1.1 | ColumnpktSwchAsyncIfIndex | read-only | current | An index for the table. |
| 1.3.6.1.4.1.164.8.2.5.1.2 | ColumnpktSwchAsyncChannelNumber | read-only | current | The channel to which this entry applies. This value is the same as the pktSwchChannelNumber. |
| 1.3.6.1.4.1.164.8.2.5.1.3 | ColumnpktSwchAsyncConnectionStatus | read-only | current | The connection status of the channel is either FREE or ENG (engaged). |
| 1.3.6.1.4.1.164.8.2.5.1.4 | ColumnpktSwchAsyncNumLogChannels | read-only | current | The number of active logical channels used by the asynchronous channel. |
| 1.3.6.1.4.1.164.8.2.5.1.5 | ColumnpktSwchAsyncNumActSessions | read-only | current | The number of active sessions opened by this asynchronous channel. |
| 1.3.6.1.4.1.164.8.2.5.1.6 | ColumnpktSwchAsyncAutocallId | read-only | current | Indicates whether the channel has been configured to use the autocall function and what is the call ID. NONE means that the channel is not configured for autoc… |
| 1.3.6.1.4.1.164.8.2.5.1.7 | ColumnpktSwchAsyncRTSStatus | read-only | current | Shows the status of the RTS line of the asynchronous channel. OFF indicates that the RTS line is not active, ON indicates that it is active, and UNUSED indicat… |
| 1.3.6.1.4.1.164.8.2.5.1.8 | ColumnpktSwchAsyncBuffToNet | read-only | current | The number of data buffers currently used by the transmit direction of the channel. |
| 1.3.6.1.4.1.164.8.2.5.1.9 | ColumnpktSwchAsyncBuffToUser | read-only | current | The number of data buffers currently used by the receive direction of the channel. |
| 1.3.6.1.4.1.164.8.2.5.1.10 | ColumnpktSwchAsyncTxXoff | read-only | current | The current state of software flow control in the transmit direction. NO indicates that traffic flow is enabled. YES indicates that traffic flow from the user'… |
| 1.3.6.1.4.1.164.8.2.5.1.11 | ColumnpktSwchAsyncRxXoff | read-only | current | The current state of software flow control in the receive direction. NO indicates that traffic flow is enabled. YES indicates that traffic flow to the user's D… |
| 1.3.6.1.4.1.164.8.2.5.1.12 | ColumnpktSwchAsyncBuffOutstand | read-only | current | Indicates the number of buffers which were sent to the async user but weren't yet freed. |
| 1.3.6.1.4.1.164.8.2.5.1.13 | ColumnpktSwchAsyncChannelMode | read-only | current | The channel mode is either X28 COMMAND or DATA TRANSFER. |
| 1.3.6.1.4.1.164.8.2.6 | TablepktSwchAsyncRunProTable | not-accessible | current | The AsyncRunPro Table includes status information and statistics provided by the PS on the async channels. |
| 1.3.6.1.4.1.164.8.2.6.1 | RowpktSwchAsyncRunProEntry | not-accessible | current | Defines the contents of each line in the Async RunPro Table. |
| 1.3.6.1.4.1.164.8.2.6.1.1 | ColumnpktSwchAsyncRunProIfIndex | read-only | current | An index for the table. |
| 1.3.6.1.4.1.164.8.2.6.1.2 | ColumnpktSwchAsyncRunProChannelNumber | read-only | current | The channel to which this entry applies. This value is the same as the pktSwchChannelNumber. |
| 1.3.6.1.4.1.164.8.2.6.1.3 | ColumnpktSwchAsyncRunProRecallChar | read-only | current | The character specified by this entry is used to escape from the data transfer mode and enter the PAD command mode. The integer values have the following meani… |
| 1.3.6.1.4.1.164.8.2.6.1.4 | ColumnpktSwchAsyncRunProEcho | read-only | current | This determines if an echo of the input characters is retured to the DTE. The options are either 'echo enabled' or 'no echo'. |
| 1.3.6.1.4.1.164.8.2.6.1.5 | ColumnpktSwchAsyncRunProDataForwChar | read-only | current | The value is a sum of values (powers of two), where each value in the sum represents a character (or characters) that is (are) used as a data forwarding charac… |
| 1.3.6.1.4.1.164.8.2.6.1.6 | ColumnpktSwchAsyncRunProIdleTimer | read-only | current | Packets will be forwarded when the idle timer expires. The idle time interval is specified as a multiple of 50 milliseconds. The multiple is given by the param… |
| 1.3.6.1.4.1.164.8.2.6.1.7 | ColumnpktSwchAsyncRunProDevFlowCont | read-only | current | This parameter determines whether or not the PAD uses software flow control for the attached device. The options are either (1) PAD uses flow control during da… |
| 1.3.6.1.4.1.164.8.2.6.1.8 | ColumnpktSwchAsyncRunProServSig | read-only | current | This parameter is used to instruct the PAD whether to transfer PAD service signals and the PAD prompt to the local DTE in standard format. The options are (1) … |
| 1.3.6.1.4.1.164.8.2.6.1.9 | ColumnpktSwchAsyncRunProBreak | read-only | current | The value is a sum of values (powers of two), where each value in the sum represents a PAD operation on receipt of the break signal from the DTE. The values th… |
| 1.3.6.1.4.1.164.8.2.6.1.10 | ColumnpktSwchAsyncRunProDiscOut | read-only | current | This parameter instructs the PAD whether to forward the user sequences included in data packets to the local DTE or discard them. The options are (1) discard o… |
| 1.3.6.1.4.1.164.8.2.6.1.11 | ColumnpktSwchAsyncRunProCRPPadding | read-only | current | This parameter specifies the number of padding characters to be added after a carriage return character is transmitted to the local DTE. |
| 1.3.6.1.4.1.164.8.2.6.1.12 | ColumnpktSwchAsyncRunProLineFold | read-only | current | This parameter specifies the maximum number of characters to be inserted before the format effector. If the value is zero, there is no insertion of a format ef… |
| 1.3.6.1.4.1.164.8.2.6.1.13 | ColumnpktSwchAsyncRunProSpeed | read-only | current | This parameter determines the rate of data transmission to and from the DTE. |
| 1.3.6.1.4.1.164.8.2.6.1.14 | ColumnpktSwchAsyncRunProPadFlowCont | read-only | current | This determines whether or not the terminal can exercise flow control over the PAD. The options are either 'device can exercise flow control' or 'device cannot… |
| 1.3.6.1.4.1.164.8.2.6.1.15 | ColumnpktSwchAsyncRunProLineFeedInsert | read-only | current | This parameter indicates when there is a line feed insertion after CR. The options are (1) Insert line feed after transmission of CR to the DTE, (2) Insert lin… |
| 1.3.6.1.4.1.164.8.2.6.1.16 | ColumnpktSwchAsyncRunProLineFeedPad | read-only | current | This parameter specifies the number of padding characters to be added after a line feed. |
| 1.3.6.1.4.1.164.8.2.6.1.17 | ColumnpktSwchAsyncRunProEditing | read-only | current | This parameter specifies the editing capabilities available in the data transfer mode. Editing is always possible when the PAD is in the command mode. The opti… |
| 1.3.6.1.4.1.164.8.2.6.1.18 | ColumnpktSwchAsyncRunProCharDel | read-only | current | This parameter specifies the character delete, which is one character from IA5. The default selection is 127 (character DEL). |
| 1.3.6.1.4.1.164.8.2.6.1.19 | ColumnpktSwchAsyncRunProLineDel | read-only | current | This parameter specifies the line delete, which is one character from IA5. The default selection is 24 (character CAN). |
| 1.3.6.1.4.1.164.8.2.6.1.20 | ColumnpktSwchAsyncRunProLineDisp | read-only | current | This entry specifies the line display character, which is one character from IA5. The default selection is 18 (character DC2). |
| 1.3.6.1.4.1.164.8.2.6.1.21 | ColumnpktSwchAsyncRunProEditServSig | read-only | current | This entry specifies the editing PAD service signals. The integer values have the following meanings: (0) No editing PAD service signals (1) Editing PAD servic… |
| 1.3.6.1.4.1.164.8.2.6.1.22 | ColumnpktSwchAsyncRunProEchomask | read-only | current | The value is a sum of values (powers of two), where each value in the sum represents a character (or characters) that is (are) included in the echo mask. The c… |
| 1.3.6.1.4.1.164.8.2.6.1.23 | ColumnpktSwchAsyncRunProParTreat | read-only | current | This entry controls the generation of parity bits in the data sent to the local DTE and the checking of the parity bit when generated by the local DTE. The opt… |
| 1.3.6.1.4.1.164.8.2.6.1.24 | ColumnpktSwchAsyncRunProPageWait | read-only | current | This entry specifies the number of line feed characters counted by the PAD before the page wait condition is entered. If the value is zero, page wait is disabl… |
| 1.3.6.1.4.1.164.8.3 | TablepktSwchPhyInterfaceTable | not-accessible | current | The Link Table defines the links configured on the PS. |
| 1.3.6.1.4.1.164.8.3.1 | RowpktSwchPhyInterfaceEntry | not-accessible | current | Defines the contents of each line in the Link Table. |
| 1.3.6.1.4.1.164.8.3.1.1 | ColumnpktSwchPhyInterfaceIfIndex | read-only | current | The ifIndex identified with this link. |
| 1.3.6.1.4.1.164.8.3.1.2 | ColumnpktSwchPhyInterfaceProtocolS | read-write | current | The protocol to be used on this link. Note for PPP: PPP protocol is allowed to be applied on Sync Links (1-3) as well as Async channels (1-24). In order to eli… |
| 1.3.6.1.4.1.164.8.3.1.3 | ColumnpktSwchPhyInterfaceProtocolA | read-only | current | The protocol currently used on this link. |
| 1.3.6.1.4.1.164.8.3.1.4 | ColumnpktSwchPhyInterfaceCopyTo | read-write | current | The destination interface number, to which the Copy is performed. |
| 1.3.6.1.4.1.164.8.3.1.5 | ColumnpktSwchPhyInterfaceChanged | read-only | current | Indicates if the current running protocol is different than the defined protocol |
| 1.3.6.1.4.1.164.8.3.1.6 | ColumnpktSwchPhyInterfaceRxBuffInPool | read-only | current | The free data buffers in the Rx pool per interface |
| 1.3.6.1.4.1.164.8.3.1.7 | ColumnpktSwchPhyInterfaceConnector | read-only | current | The connector type of the interface |
| 1.3.6.1.4.1.164.8.3.1.8 | ColumnpktSwchPhyInterfaceNeighborIp | read-only | current | The Ip address of the device on the other side of the link. |
| 1.3.6.1.4.1.164.8.3.1.9 | ColumnpktSwchPhyInterfaceProtocolStatus | read-write | current | The status of the Interface Protocol row in the Table. |
| 1.3.6.1.4.1.164.8.3.1.10 | ColumnpktSwchPhyInterfaceTestCmd | read-write | current | START/STOP a test on the current interface. The available tests are: v54Local - Local Analog Loopback (AL), L3 according to ITU-T standard. v54Remote - Remote … |
| 1.3.6.1.4.1.164.8.3.1.11 | ColumnpktSwchPhyInterfaceTestTransmittedFrames | read-only | current | No. of frames which were transmitted from this interface during the TEST. |
| 1.3.6.1.4.1.164.8.3.1.12 | ColumnpktSwchPhyInterfaceTestReceivedFrames | read-only | current | No. of frames which were received on this interface during the TEST. |
| 1.3.6.1.4.1.164.8.3.1.13 | ColumnpktSwchPhyInterfaceTestLostFrames | read-only | current | Percentage of the frames which were lost during the TEST. |
| 1.3.6.1.4.1.164.8.4 | NodepktSwchx25 | |||
| 1.3.6.1.4.1.164.8.4.1 | NodepktSwchLapb | |||
| 1.3.6.1.4.1.164.8.4.1.1 | TablepktSwchLapbSTable | not-accessible | current | The Lapb Table includes statistics and configurable objects provided by the PS that are not included in RFC 1381. |
| 1.3.6.1.4.1.164.8.4.1.1.1 | RowpktSwchLapbSEntry | not-accessible | current | Defines the contents of each line in the RAD Lapb Table. |
| 1.3.6.1.4.1.164.8.4.1.1.1.1 | ColumnpktSwchLapbLinkNumberS | read-only | current | The link number with which this entry is associated. This value corresponds to pktSwchPhyInterfaceNumber. There is an entry for each link for which the pktSwch… |
| 1.3.6.1.4.1.164.8.4.1.1.1.2 | ColumnpktSwchLapbInternalClockS | read-write | current | The internal clock speed to be used on this LAPB link. If external clock is used, the value is 255. |
| 1.3.6.1.4.1.164.8.4.1.1.1.3 | ColumnpktSwchLapbLineOptionS | read-write | current | The line option to be used on this link. A value of zero indicates no options. A value between 0 and 255 inclusive specifes a time in minutes after which the l… |
| 1.3.6.1.4.1.164.8.4.1.1.1.4 | ColumnpktSwchLapbSegmentSizeS | read-write | current | This value is for the use of billing information. The value can be no larger than the maximum packet size. |
| 1.3.6.1.4.1.164.8.4.1.1.1.5 | ColumnpktSwchLapbXIDS | read-write | current | When this parameter is different than zero, this lapb is configured as a V25 bis dialed link. This is the XID entry Index which this dialed link is associated … |
| 1.3.6.1.4.1.164.8.4.1.1.1.6 | ColumnpktSwchLapbAckCounterS | read-write | current | This object defines how many frames will be received on the link before the PS will send Acknowledge (RR frame). It is used for Piggy Back Acknowledge (ack wit… |
| 1.3.6.1.4.1.164.8.4.1.1.1.7 | ColumnpktSwchLapbAckTimerS | read-write | current | The Ack Timer defines the maximum time in seconds that the device will wait before sending RR acknowledgment on the received frames. It is used for Piggy Back … |
| 1.3.6.1.4.1.164.8.4.1.2 | TablepktSwchLapbATable | not-accessible | current | The Lapb Table includes statistics and configurable objects provided by the PS that are not included in RFC 1381. |
| 1.3.6.1.4.1.164.8.4.1.2.1 | RowpktSwchLapbAEntry | not-accessible | current | Defines the contents of each line in the RAD Lapb Table. |
| 1.3.6.1.4.1.164.8.4.1.2.1.1 | ColumnpktSwchLapbLinkNumberA | read-only | current | The link number with which this entry is associated. This value corresponds to pktSwchPhyInterfaceNumber. There is an entry for each link for which the pktSwch… |
| 1.3.6.1.4.1.164.8.4.1.2.1.2 | ColumnpktSwchLapbInternalClockA | read-only | current | The internal clock speed currently used on this LAPB link. If external clock is used, the value is 255. |
| 1.3.6.1.4.1.164.8.4.1.2.1.3 | ColumnpktSwchLapbLineOptionA | read-only | current | The line option currently used on this link. A value of zero indicates no options. A value between 1 and 255 inclusive specifes a time in minutes after which t… |
| 1.3.6.1.4.1.164.8.4.1.2.1.4 | ColumnpktSwchLapbSegmentSizeA | read-only | current | The current value of the segment size. |
| 1.3.6.1.4.1.164.8.4.1.2.1.5 | ColumnpktSwchLapbLineProtocol | read-only | current | This is the lower level protocol which runs under this lapb interface. |
| 1.3.6.1.4.1.164.8.4.1.2.1.6 | ColumnpktSwchLapbLowerId | read-only | current | In case of X.25 over Frame-relay this is the lower level link number. |
| 1.3.6.1.4.1.164.8.4.1.2.1.7 | ColumnpktSwchLapbXIDA | read-only | current | When this parameter is different than zero, this lapb is configured as a V25 bis dialed link. This is the XID entry which this dialed link is associated with. |
| 1.3.6.1.4.1.164.8.4.1.2.1.8 | ColumnpktSwchLapbTransmittedIFrames | read-only | current | The transmitted I frames on this link. |
| 1.3.6.1.4.1.164.8.4.1.2.1.9 | ColumnpktSwchLapbReceivedIFrames | read-only | current | The received I frames on this link. |
| 1.3.6.1.4.1.164.8.4.1.2.1.10 | ColumnpktSwchLapbNSError | read-only | current | The number of I frames transmitted out of sequence. |
| 1.3.6.1.4.1.164.8.4.1.2.1.11 | ColumnpktSwchLapbTransmittedRRFrames | read-only | current | The transmitted RR frames on this link. |
| 1.3.6.1.4.1.164.8.4.1.2.1.12 | ColumnpktSwchLapbReceivedRRFrames | read-only | current | The received RR frames on this link. |
| 1.3.6.1.4.1.164.8.4.1.2.1.13 | ColumnpktSwchLapbTransmittedRNRFrames | read-only | current | The transmitted RNR frames on this link. |
| 1.3.6.1.4.1.164.8.4.1.2.1.14 | ColumnpktSwchLapbReceivedRNRFrames | read-only | current | The received RNR frames on this link. |
| 1.3.6.1.4.1.164.8.4.1.2.1.15 | ColumnpktSwchLapbTransmittedFRMRFrames | read-only | current | The transmitted FRMR frames on this link. |
| 1.3.6.1.4.1.164.8.4.1.2.1.16 | ColumnpktSwchLapbReceivedFRMRFrames | read-only | current | The received FRMR frames on this link. |
| 1.3.6.1.4.1.164.8.4.1.2.1.17 | ColumnpktSwchLapbAckCounterA | read-only | current | This object defines how many frames will be received on the link before the PS will send Acknowledge (RR frame). It is used for Piggy Back Acknowledge (ack wit… |
| 1.3.6.1.4.1.164.8.4.1.2.1.18 | ColumnpktSwchLapbAckTimerA | read-only | current | The Ack Timer defines the maximum time in seconds that the device will wait before sending RR acknowledgment on the received frames. It is used for Piggy Back … |
| 1.3.6.1.4.1.164.8.4.2 | NodepktSwchPlp | |||
| 1.3.6.1.4.1.164.8.4.2.1 | TablepktSwchPlpSTable | not-accessible | current | The Scratch Plp Table includes configurable objects provided by the PS that are not included in RFC 1382. |
| 1.3.6.1.4.1.164.8.4.2.1.1 | RowpktSwchPlpSEntry | not-accessible | current | Defines the contents of each line in the RAD Scratch Plp Table. |
| 1.3.6.1.4.1.164.8.4.2.1.1.1 | ColumnpktSwchPlpLinkNumberS | read-only | current | The ifIndex of the X.25 interface. |
| 1.3.6.1.4.1.164.8.4.2.1.1.2 | ColumnpktSwchPlpInCallOptionS | read-write | current | The in call options for the link. The value is a sum of values (powers of two), where each value in the sum represents an option. The values that may be includ… |
| 1.3.6.1.4.1.164.8.4.2.1.1.3 | ColumnpktSwchPlpOutCallOptionS | read-write | current | The out call options for the link. The value is a sum of values (powers of two), where each value in the sum represents an option. The values that may be inclu… |
| 1.3.6.1.4.1.164.8.4.2.1.1.4 | ColumnpktSwchPlpCugSubscriptionS | read-write | current | The CUG subscription for the link. |
| 1.3.6.1.4.1.164.8.4.2.1.1.5 | ColumnpktSwchPlpNUIS | read-write | current | This is the NUI group which this Plp is part of. |
| 1.3.6.1.4.1.164.8.4.2.1.1.6 | ColumnpktSwchPlpCpyPktSize | read-write | current | x25 packet size. |
| 1.3.6.1.4.1.164.8.4.2.1.1.7 | ColumnpktSwchPlpCpyWinSize | read-write | current | x25 window size. |
| 1.3.6.1.4.1.164.8.4.2.2 | TablepktSwchPlpATable | not-accessible | current | The Active Plp Table includes objects provided by the PS that are not included in RFC 1382. It also includes some packet layer statistics, some of which are de… |
| 1.3.6.1.4.1.164.8.4.2.2.1 | RowpktSwchPlpAEntry | not-accessible | current | Defines the contents of each line in the RAD Active Plp Table. |
| 1.3.6.1.4.1.164.8.4.2.2.1.1 | ColumnpktSwchPlpLinkNumberA | read-only | current | The link number with which this entry is associated. This value corresponds to pktSwchPhyInterfaceNumber. There is an entry for each link for which the pktSwch… |
| 1.3.6.1.4.1.164.8.4.2.2.1.2 | ColumnpktSwchPlpInCallOptionA | read-only | current | The current in call options for the link. The value is a sum of values (powers of two), where each value in the sum represents an option. The values that can b… |
| 1.3.6.1.4.1.164.8.4.2.2.1.3 | ColumnpktSwchPlpOutCallOptionA | read-only | current | The out call options for the link. The value is a sum of values (powers of two), where each value in the sum represents an option. The values that may be inclu… |
| 1.3.6.1.4.1.164.8.4.2.2.1.4 | ColumnpktSwchPlpCugSubscriptionA | read-only | current | The current CUG subscription for the link. |
| 1.3.6.1.4.1.164.8.4.2.2.1.5 | ColumnpktSwchPlpNUIA | read-only | current | This is the NUI group which this Plp is part of. |
| 1.3.6.1.4.1.164.8.4.2.2.1.6 | ColumnpktSwchStatOutRestarts | read-only | current | The number of remotely initiated (including provider initiated) restarts experienced by the PLE excluding the restart associated with bringing up the PLE inter… |
| 1.3.6.1.4.1.164.8.4.3 | NodepktSwchPlaceHolderForFutureUse | |||
| 1.3.6.1.4.1.164.8.4.4 | NodepktSwchCug | |||
| 1.3.6.1.4.1.164.8.4.4.1 | TablepktSwchCugSTable | not-accessible | current | The Scratch Cug Table lists the Closed User Groups defined to each X.25 link. |
| 1.3.6.1.4.1.164.8.4.4.1.1 | RowpktSwchCugSEntry | not-accessible | current | Defines the contents of each line in the Scratch RAD Cug Table. |
| 1.3.6.1.4.1.164.8.4.4.1.1.1 | ColumnpktSwchCugLinkNumberS | read-only | current | The link number with which this entry is associated. This value corresponds to pktSwchPhyInterfaceNumber. There is an entry for each link for which the pktSwch… |
| 1.3.6.1.4.1.164.8.4.4.1.1.2 | ColumnpktSwchCugIndexS | read-only | current | The index of the CUG for a specific link. The lowest indexed CUG is the preferential CUG. |
| 1.3.6.1.4.1.164.8.4.4.1.1.3 | ColumnpktSwchCugNumberS | read-write | current | The CUG number for this entry. |
| 1.3.6.1.4.1.164.8.4.4.1.1.4 | ColumnpktSwchCugStatus | read-write | current | The status of this CUG table entry. The choices are those defined in the SNMPv2 Textual Conventions for RowStatus. This will allow easy replacement of the INTE… |
| 1.3.6.1.4.1.164.8.4.4.2 | TablepktSwchCugATable | not-accessible | current | The Active Cug Table lists the active Closed User Groups defined to each X.25 link. |
| 1.3.6.1.4.1.164.8.4.4.2.1 | RowpktSwchCugAEntry | not-accessible | current | Defines the contents of each line in the Active RAD Cug Table. |
| 1.3.6.1.4.1.164.8.4.4.2.1.1 | ColumnpktSwchCugLinkNumberA | read-only | current | The link number with which this entry is associated. This value corresponds to pktSwchPhyInterfaceNumber. There is an entry for each link for which the pktSwch… |
| 1.3.6.1.4.1.164.8.4.4.2.1.2 | ColumnpktSwchCugIndexA | read-only | current | The index of the CUG for a specific link. The lowest indexed CUG is the preferential CUG. |
| 1.3.6.1.4.1.164.8.4.4.2.1.3 | ColumnpktSwchCugNumberA | read-only | current | The CUG number for this entry. |
| 1.3.6.1.4.1.164.8.4.5 | NodepktSwchLogCh | |||
| 1.3.6.1.4.1.164.8.4.5.1 | TablepktSwchLogChAssTable | not-accessible | current | These objects contain information about the channel number configuration in an X.25 PLE. These values are the configured values. changes in these values after … |
| 1.3.6.1.4.1.164.8.4.5.1.1 | RowpktSwchLogChAssEntry | not-accessible | current | Entries of pktSwchLogChAssTable. |
| 1.3.6.1.4.1.164.8.4.5.1.1.1 | ColumnpktSwchLogChAssIndex | read-only | current | The ifIndex value for the X.25 Interface. |
| 1.3.6.1.4.1.164.8.4.5.1.1.2 | ColumnpktSwchLogChAssLIC | read-only | current | Lowest Incoming channel. |
| 1.3.6.1.4.1.164.8.4.5.1.1.3 | ColumnpktSwchLogChAssHIC | read-only | current | Highest Incoming channel. A value of zero indicates no channels in this range. |
| 1.3.6.1.4.1.164.8.4.5.1.1.4 | ColumnpktSwchLogChAssLTC | read-only | current | Lowest Two-way channel. |
| 1.3.6.1.4.1.164.8.4.5.1.1.5 | ColumnpktSwchLogChAssHTC | read-only | current | Highest Two-way channel. A value of zero indicates no channels in this range. |
| 1.3.6.1.4.1.164.8.4.5.1.1.6 | ColumnpktSwchLogChAssLOC | read-only | current | Lowest outgoing channel. |
| 1.3.6.1.4.1.164.8.4.5.1.1.7 | ColumnpktSwchLogChAssHOC | read-only | current | Highest outgoing channel. A value of zero indicates no channels in this range. |
| 1.3.6.1.4.1.164.8.4.5.2 | TablepktSwchLogChPartnerTable | not-accessible | current | These objects contain information about the partner channel number configuration in an X.25 PLE. These values are the configured values. changes in these value… |
| 1.3.6.1.4.1.164.8.4.5.2.1 | RowpktSwchLogChPartnerEntry | not-accessible | current | Entries of pktSwchLogChPartnerTable. |
| 1.3.6.1.4.1.164.8.4.5.2.1.1 | ColumnpktSwchLogChPartnerIfIndex | read-only | current | The ifIndex value for the Lapb Interface. |
| 1.3.6.1.4.1.164.8.4.5.2.1.2 | ColumnpktSwchLogChPartnerLcIndex | read-only | current | The Index value for the LCN. |
| 1.3.6.1.4.1.164.8.4.5.2.1.3 | ColumnpktSwchLogChPartnerProtocol | read-only | current | The protocol of the partner. |
| 1.3.6.1.4.1.164.8.4.5.2.1.4 | ColumnpktSwchLogChPartnerOpIfIndex | read-only | current | The ifIndex value for the partner Lapb Interface. |
| 1.3.6.1.4.1.164.8.4.5.2.1.5 | ColumnpktSwchLogChPartnerOpLcIndex | read-only | current | The Index value for the partner LCN. |
| 1.3.6.1.4.1.164.8.5 | NodepktSwchHdlc | |||
| 1.3.6.1.4.1.164.8.5.1 | TablepktSwchHdlcSTable | not-accessible | current | The Scratch Hdlc Table contains configuration information for HDLC links |
| 1.3.6.1.4.1.164.8.5.1.1 | RowpktSwchHdlcSEntry | not-accessible | current | Defines the contents of each line in the RAD Hdlc Table. |
| 1.3.6.1.4.1.164.8.5.1.1.1 | ColumnpktSwchHdlcLinkNumberS | read-only | current | The link number with which this entry is associated. This value corresponds to pktSwchPhyInterfaceNumber. There is an entry for each link for which the pktSwch… |
| 1.3.6.1.4.1.164.8.5.1.1.2 | ColumnpktSwchHdlcDestAddrS | read-write | current | The destination address. It defines the X.25 address on the remote device. |
| 1.3.6.1.4.1.164.8.5.1.1.3 | ColumnpktSwchHdlcDestSubAddrS | read-write | current | The destination subaddress. It defines the synchronous link subaddress on the remote device. |
| 1.3.6.1.4.1.164.8.5.1.1.4 | ColumnpktSwchHdlcRedialTimeoutS | read-write | current | The time interval in seconds between two consecutive connect operations retries. |
| 1.3.6.1.4.1.164.8.5.1.1.5 | ColumnpktSwchHdlcRedialRetriesS | read-write | current | This defines how many times the call operation is repeated if the call request has failed. |
| 1.3.6.1.4.1.164.8.5.1.1.6 | ColumnpktSwchHdlcInactivityS | read-write | current | The amount of time in minutes of inactivity that will cause the session to disconnect. |
| 1.3.6.1.4.1.164.8.5.1.1.7 | ColumnpktSwchHdlcX25FacilitiesS | read-write | current | This specifies the X.25 facilities. The value is a sum of values (powers of two), where each value in the sum represents an option. The values that may be incl… |
| 1.3.6.1.4.1.164.8.5.1.1.8 | ColumnpktSwchHdlcLocalSubaddr1S | read-write | current | The first local subaddress. |
| 1.3.6.1.4.1.164.8.5.1.1.9 | ColumnpktSwchHdlcLocalSubaddr2S | read-write | current | The secondary local subaddress. |
| 1.3.6.1.4.1.164.8.5.1.1.10 | ColumnpktSwchHdlcDestDlciS | read-write | current | The local DLCI which is used for HDLC encapsulation over Frame Relay. Range: 16...991 |
| 1.3.6.1.4.1.164.8.5.1.1.11 | ColumnpktSwchHdlcDestPortS | read-write | current | The local port that is used for HDLC encapsulation over Frame Relay. Range: 1...12 |
| 1.3.6.1.4.1.164.8.5.1.1.12 | ColumnpktSwchHdlcProtocolS | read-write | current | The HDLC protocol type. |
| 1.3.6.1.4.1.164.8.5.1.1.13 | ColumnpktSwchHdlcFlowContOptionsS | read-write | current | This specifies the type of flow control of the HDLC link. The value is a sum of values (powers of two), where each value in the sum represents an option. The v… |
| 1.3.6.1.4.1.164.8.5.1.1.14 | ColumnpktSwchHdlcBufferFlowControlS | read-write | current | The number of buffers that will be allocated for the HDLC link. Default value is 10 |
| 1.3.6.1.4.1.164.8.5.1.1.15 | ColumnpktSwchHdlcInternalClockS | read-write | current | The baud rate of the internal clock. |
| 1.3.6.1.4.1.164.8.5.1.1.16 | ColumnpktSwchHdlcNrzModeS | read-write | current | The data encoding format. The value is a sum of values (powers of two), where each value in the sum represents an option. The values that may be included in th… |
| 1.3.6.1.4.1.164.8.5.2 | TablepktSwchHdlcATable | not-accessible | current | The Active Hdlc Table contains active configuration information for HDLC links |
| 1.3.6.1.4.1.164.8.5.2.1 | RowpktSwchHdlcAEntry | not-accessible | current | Defines the contents of each line in the RAD Hdlc Table. |
| 1.3.6.1.4.1.164.8.5.2.1.1 | ColumnpktSwchHdlcLinkNumberA | read-only | current | The link number with which this entry is associated. This value corresponds to pktSwchPhyInterfaceNumber. There is an entry for each link for which the pktSwch… |
| 1.3.6.1.4.1.164.8.5.2.1.2 | ColumnpktSwchHdlcDestAddrA | read-only | current | The destination address. It defines the X.25 address on the remote device. |
| 1.3.6.1.4.1.164.8.5.2.1.3 | ColumnpktSwchHdlcDestSubAddrA | read-only | current | The destination subaddress. It defines the synchronous link subaddress on the remote device. |
| 1.3.6.1.4.1.164.8.5.2.1.4 | ColumnpktSwchHdlcRedialTimeoutA | read-only | current | The time interval in seconds between two consecutive connect operations retries. |
| 1.3.6.1.4.1.164.8.5.2.1.5 | ColumnpktSwchHdlcRedialRetriesA | read-only | current | This defines how many times the call operation is repeated if the call request has failed. |
| 1.3.6.1.4.1.164.8.5.2.1.6 | ColumnpktSwchHdlcInactivityA | read-only | current | The amount of time in minutes of inactivity that will cause the session to disconnect. |
| 1.3.6.1.4.1.164.8.5.2.1.7 | ColumnpktSwchHdlcX25FacilitiesA | read-only | current | This specifies the X.25 facilities. The value is a sum of values (powers of two), where each value in the sum represents an option. The values that may be incl… |
| 1.3.6.1.4.1.164.8.5.2.1.8 | ColumnpktSwchHdlcLocalSubaddr1A | read-only | current | The first local subaddress. |
| 1.3.6.1.4.1.164.8.5.2.1.9 | ColumnpktSwchHdlcLocalSubaddr2A | read-only | current | The secondary local subaddress. |
| 1.3.6.1.4.1.164.8.5.2.1.10 | ColumnpktSwchHdlcDestDlciA | read-only | current | The local DLCI which is used for HDLC encapsulation over Frame Relay. |
| 1.3.6.1.4.1.164.8.5.2.1.11 | ColumnpktSwchHdlcDestPortA | read-only | current | The local port that is used for HDCL encapsulation over Frame Relay. |
| 1.3.6.1.4.1.164.8.5.2.1.12 | ColumnpktSwchHdlcProtocolA | read-only | current | The HDLC protocol type. |
| 1.3.6.1.4.1.164.8.5.2.1.13 | ColumnpktSwchHdlcFlowContOptionsA | read-only | current | This specifies the type of flow control of the HDLC link. The value is a sum of values (powers of two), where each value in the sum represents an option. The v… |
| 1.3.6.1.4.1.164.8.5.2.1.14 | ColumnpktSwchHdlcBufferFlowControlA | read-only | current | The number of buffers that will be allocated for the HDLC link. |
| 1.3.6.1.4.1.164.8.5.2.1.15 | ColumnpktSwchHdlcInternalClockA | read-only | current | The baud rate of the internal clock. |
| 1.3.6.1.4.1.164.8.5.2.1.16 | ColumnpktSwchHdlcNrzModeA | read-only | current | The data encoding format. The value is a sum of values (powers of two), where each value in the sum represents an option. The values that may be included in th… |
| 1.3.6.1.4.1.164.8.5.2.1.17 | ColumnpktSwchHdlcConnStatus | read-only | current | The status of the Hdlc session. |
| 1.3.6.1.4.1.164.8.5.2.1.18 | ColumnpktSwchHdlcSpecialStatus | read-only | current | The status of the Hdlc link. |
| 1.3.6.1.4.1.164.8.5.2.1.19 | ColumnpktSwchHdlcCtsStatus | read-only | current | The CTS status. |
| 1.3.6.1.4.1.164.8.5.2.1.20 | ColumnpktSwchHdlcRunningX25Lcn | read-only | current | The format of the string is ifIndex:LCN |
| 1.3.6.1.4.1.164.8.5.2.1.21 | ColumnpktSwchHdlcRunningDlci | read-only | current | The format of the string is ifIndex:DLCI |
| 1.3.6.1.4.1.164.8.5.2.1.22 | ColumnpktSwchHdlcMaxBuffToNet | read-only | current | The maximum number of buffers above which Flow Control is enabled |
| 1.3.6.1.4.1.164.8.5.2.1.23 | ColumnpktSwchHdlcBuffToNet | read-only | current | The number of buffers waiting for transmission. |
| 1.3.6.1.4.1.164.8.7 | TablepktSwchStmTable | not-accessible | current | The STM table contains information for STM links |
| 1.3.6.1.4.1.164.8.7.1 | RowpktSwchStmEntry | not-accessible | current | Defines the contents of each line in the RAD STM Table. |
| 1.3.6.1.4.1.164.8.7.1.1 | ColumnpktSwchStmLinkNumber | read-only | current | The link number with which this entry is associated. This value corresponds to pktSwchPhyInterfaceNumber. There is an entry for each link whose pktSwchPhyInter… |
| 1.3.6.1.4.1.164.8.7.1.2 | ColumnpktSwchStmInternalClockS | read-write | current | The baud rate of the internal clock. |
| 1.3.6.1.4.1.164.8.7.1.3 | ColumnpktSwchStmInternalClockA | read-only | current | The current baud rate of the internal clock. |
| 1.3.6.1.4.1.164.8.7.1.4 | ColumnpktSwchStmConn | read-only | current | The connectivity status of the STM interface. |
| 1.3.6.1.4.1.164.8.7.1.5 | ColumnpktSwchStmSyncLoss | read-only | current | The counter for sync loss. |
| 1.3.6.1.4.1.164.8.8 | NodepktSwchFr | |||
| 1.3.6.1.4.1.164.8.8.1 | ScalarpktSwchFrTotFunnels | read-only | current | The total number of Funnels on the PS. |
| 1.3.6.1.4.1.164.8.8.2 | TablepktSwchFrSTable | not-accessible | current | The Frame Relay Scratch Table includes the scratch values of configurable objects provided by the PS that are not included in RFC 1315. |
| 1.3.6.1.4.1.164.8.8.2.1 | RowpktSwchFrSEntry | not-accessible | current | Defines the contents of each line in the RAD PS Frame Relay Scratch Table. |
| 1.3.6.1.4.1.164.8.8.2.1.1 | ColumnpktSwchFrIfIndexS | read-only | current | This is the ifIndex of the frame relay port. |
| 1.3.6.1.4.1.164.8.8.2.1.2 | ColumnpktSwchFrMaintProtS | read-write | current | This defines what maintenance protocol is running over this port. 0 - No maintenance protocol. 1 - ANSI PVC maintenance protocol running on DLCI number 0. 2 - … |
| 1.3.6.1.4.1.164.8.8.2.1.3 | ColumnpktSwchFrMaintModeS | read-write | current | This defines the mode of maintenance protocol running over this port. |
| 1.3.6.1.4.1.164.8.8.2.1.4 | ColumnpktSwchFrRxPoolRedLineS | read-write | current | When the number of empty receive buffers at the port reaches this figure (of frames),the port receiver is congested. This field value should be less than the R… |
| 1.3.6.1.4.1.164.8.8.2.1.5 | ColumnpktSwchFrRxPoolOkS | read-write | current | Clear the receive congestion condition when the number of empty receive buffers at the port reaches this figure. This value (of frames) should be greater than … |
| 1.3.6.1.4.1.164.8.8.2.1.6 | ColumnpktSwchFrTxPoolRedLineS | read-write | current | When the number of frames awaiting transmission reaches this figure, the port transmitter is congested. This field value should be greater than the Tx pool OK … |
| 1.3.6.1.4.1.164.8.8.2.1.7 | ColumnpktSwchFrTxPoolOkS | read-write | current | Clear the transmit congestion condition when the number of frames awaiting transmission at the port reaches this figure. This value (of frames) should be less … |
| 1.3.6.1.4.1.164.8.8.2.1.8 | ColumnpktSwchFrTxCeilingS | read-write | current | The maximum allowable transmit pool for this port. |
| 1.3.6.1.4.1.164.8.8.2.1.9 | ColumnpktSwchFrInternalClockS | read-write | current | The baud rate of the internal clock. |
| 1.3.6.1.4.1.164.8.8.2.1.10 | ColumnpktSwchFrNrzModeS | read-write | current | The data encoding format. |
| 1.3.6.1.4.1.164.8.8.2.1.11 | ColumnpktSwchFrDlciHeaderModeS | read-write | current | Dlci Header length for this FR port. Option 4 means that there will be no management Dlci in the range of 1024 to 8388607. The management Dlci will be in the r… |
| 1.3.6.1.4.1.164.8.8.2.1.12 | ColumnpktSwchFrDcdLinkFailureS | read-write | current | Link Failure Detection by DCD. If Link Failure detection by DCD is on - (3), when the DCD is down, the FR SW will detect it and change the FR link status from … |
| 1.3.6.1.4.1.164.8.8.2.1.13 | ColumnpktSwchFrTxIdlesS | read-write | current | This parameter shows whether the PS will Transmit Idles between frames and control the RTS pin. Default: no(2). |
| 1.3.6.1.4.1.164.8.8.2.1.14 | ColumnpktSwchFrOperationModeS | read-write | current | When H/W Control is configured, the SCC H/W will detect the change in the DCD or CTS signals and Start or Stop transmission automatically. When S/W Control is … |
| 1.3.6.1.4.1.164.8.8.2.1.15 | ColumnpktSwchFrPhysInterfOptionsS | read-write | current | This is the physical interface. Note that the DDS physical interface H/W does not exist in the FPS-8. It is relevant for other PS devices only. For FPS-8 only … |
| 1.3.6.1.4.1.164.8.8.3 | TablepktSwchFrATable | not-accessible | current | The Frame Relay Active Table includes statistics and the active values of configurable objects provided by the PS that are not included in RFC 1315. |
| 1.3.6.1.4.1.164.8.8.3.1 | RowpktSwchFrAEntry | not-accessible | current | Defines the contents of each line in the RAD PS Frame Relay Active Table. |
| 1.3.6.1.4.1.164.8.8.3.1.1 | ColumnpktSwchFrIfIndexA | read-only | current | This is the ifIndex of the frame relay port. |
| 1.3.6.1.4.1.164.8.8.3.1.2 | ColumnpktSwchFrMaintProtA | read-only | current | This defines what maintenance protocol is running over this port. 0 - No maintenance protocol. 1 - ANSI PVC maintenance protocol running on DLCI number 0. 2 - … |
| 1.3.6.1.4.1.164.8.8.3.1.3 | ColumnpktSwchFrMaintModeA | read-only | current | This defines the mode of maintenance protocol running over this port. |
| 1.3.6.1.4.1.164.8.8.3.1.4 | ColumnpktSwchFrRxPoolRedLineA | read-only | current | When the number of empty receive buffers at the port reaches this figure (of frames), the port receiver is congested. This field value should be less than the … |
| 1.3.6.1.4.1.164.8.8.3.1.5 | ColumnpktSwchFrRxPoolOkA | read-only | current | Clear the receive congestion condition when the number of empty receive buffers at the port reaches this figure. This value (of frames) should be greater than … |
| 1.3.6.1.4.1.164.8.8.3.1.6 | ColumnpktSwchFrTxPoolRedLineA | read-only | current | When the number of frames awaiting transmission reaches this figure, the port transmitter is congested. This field value should be greater than the Tx pool OK … |
| 1.3.6.1.4.1.164.8.8.3.1.7 | ColumnpktSwchFrTxPoolOkA | read-only | current | Clear the transmit congestion condition when the number of frames awaiting transmission at the port reaches this figure. This value (of frames) should be less … |
| 1.3.6.1.4.1.164.8.8.3.1.8 | ColumnpktSwchFrTxCeilingA | read-only | current | The maximum allowable transmit pool for this port. |
| 1.3.6.1.4.1.164.8.8.3.1.9 | ColumnpktSwchFrInternalClockA | read-only | current | The baud rate of the internal clock. |
| 1.3.6.1.4.1.164.8.8.3.1.10 | ColumnpktSwchFrNrzModeA | read-only | current | The data encoding format. |
| 1.3.6.1.4.1.164.8.8.3.1.11 | ColumnpktSwchFrDlcmiPollingInterval | read-only | current | This is the number of seconds between succes- sive status enquiry messages. |
| 1.3.6.1.4.1.164.8.8.3.1.12 | ColumnpktSwchFrDlcmiFullEnquiryInterval | read-only | current | Number of status enquiry intervals that pass before issuance of a full status enquiry mes- sage. |
| 1.3.6.1.4.1.164.8.8.3.1.13 | ColumnpktSwchFrDlcmiErrorThreshold | read-only | current | This is the maximum number of unanswered Status Enquiries the equipment shall accept be- fore declaring the interface down. |
| 1.3.6.1.4.1.164.8.8.3.1.14 | ColumnpktSwchFrDlcmiMonitoredEvents | read-only | current | This is the number of status polling intervals over which the error threshold is counted. For example, if within 'MonitoredEvents' number of events the station… |
| 1.3.6.1.4.1.164.8.8.3.1.15 | ColumnpktSwchFrDlciHeaderModeA | read-only | current | Dlci Header length for this FR port. Option 4 means that there will be no management Dlci in the range of 1024 to 8388607. The management Dlci will be in the r… |
| 1.3.6.1.4.1.164.8.8.3.1.16 | ColumnpktSwchFrDcdLinkFailureA | read-only | current | Link Failure Detection by DCD. If Link Failure detection by DCD is on - (3), when the DCD is down, the FR SW will detect it and change the FR link status from … |
| 1.3.6.1.4.1.164.8.8.3.1.17 | ColumnpktSwchFrTxIdlesA | read-only | current | This parameter shows whether the PS will Transmit Idles between frames and control the RTS pin. Default: no(2). |
| 1.3.6.1.4.1.164.8.8.3.1.18 | ColumnpktSwchFrOperationModeA | read-only | current | When H/W Control is configured, the SCC H/W will detect the change in the DCD or CTS signals and Start or Stop transmission automatically. When S/W Control is … |
| 1.3.6.1.4.1.164.8.8.3.1.19 | ColumnpktSwchFrPhysInterfOptionsA | read-only | current | This is the physical interface. Note that the DDS physical interface H/W does not exist in the FPS-8. It is relevant for other PS devices only. For FPS-8 only … |
| 1.3.6.1.4.1.164.8.8.4 | TablepktSwchFrIfTable | not-accessible | current | The Frame Relay Active Port Table includes statistics and configurable objects provided by the PS that are not included in RFC 1315. |
| 1.3.6.1.4.1.164.8.8.4.1 | RowpktSwchFrIfEntry | not-accessible | current | Defines the contents of each line in the RAD PS Frame Relay Port Active Table. |
| 1.3.6.1.4.1.164.8.8.4.1.1 | ColumnpktSwchFrIfTxBytes | read-only | current | The number of Tx bytes. |
| 1.3.6.1.4.1.164.8.8.4.1.2 | ColumnpktSwchFrIfRxBytes | read-only | current | The number of Rx bytes. |
| 1.3.6.1.4.1.164.8.8.4.1.3 | ColumnpktSwchFrIfTxCongDiscards | read-only | current | The number of frames discarded because of Tx congestion. |
| 1.3.6.1.4.1.164.8.8.4.1.4 | ColumnpktSwchFrIfDeTxFrames | read-only | current | The number of DE Tx frames. |
| 1.3.6.1.4.1.164.8.8.4.1.5 | ColumnpktSwchFrIfDeRxFrames | read-only | current | The number of DE Rx frames. |
| 1.3.6.1.4.1.164.8.8.4.1.6 | ColumnpktSwchFrIfFecnTxFrames | read-only | current | The number of FECN Tx frames. |
| 1.3.6.1.4.1.164.8.8.4.1.7 | ColumnpktSwchFrIfFecnRxFrames | read-only | current | The number of FECN Tx frames. |
| 1.3.6.1.4.1.164.8.8.4.1.8 | ColumnpktSwchFrIfBecnTxFrames | read-only | current | The number of BECN Tx frames. |
| 1.3.6.1.4.1.164.8.8.4.1.9 | ColumnpktSwchFrIfBecnRxFrames | read-only | current | The number of BECN Tx frames. |
| 1.3.6.1.4.1.164.8.8.4.1.10 | ColumnpktSwchFrIfCommRateViolTxFrames | read-only | current | The number of Tx committed rate violations in number of frames. |
| 1.3.6.1.4.1.164.8.8.4.1.11 | ColumnpktSwchFrIfCommRateViolRxFrames | read-only | current | The number of Rx committed rate violations in number of frames. |
| 1.3.6.1.4.1.164.8.8.4.1.12 | ColumnpktSwchFrIfExcessRateViolTxFrames | read-only | current | The number of Tx excess rate violations in number of frames. |
| 1.3.6.1.4.1.164.8.8.4.1.13 | ColumnpktSwchFrIfExcessRateViolRxFrames | read-only | current | The number of Rx excess rate violations in number of frames. |
| 1.3.6.1.4.1.164.8.8.4.1.14 | ColumnpktSwchFrIfBuffersInTxPool | read-only | current | The number of buffers waiting for transmission. |
| 1.3.6.1.4.1.164.8.8.4.1.15 | ColumnpktSwchFrIfFreeBuffersInRxPool | read-only | current | The number of free buffers in the Rx pool. |
| 1.3.6.1.4.1.164.8.8.4.1.16 | ColumnpktSwchFrIfLmiTxFrames | read-only | current | The number of LMI Tx Frames. |
| 1.3.6.1.4.1.164.8.8.4.1.17 | ColumnpktSwchFrIfLmiRxFrames | read-only | current | The number of LMI Rx Frames. |
| 1.3.6.1.4.1.164.8.8.4.1.18 | ColumnpktSwchFrIfAnsiTxFrames | read-only | current | The number of ANSI Tx Frames. |
| 1.3.6.1.4.1.164.8.8.4.1.19 | ColumnpktSwchFrIfAnsiRxFrames | read-only | current | The number of ANSI Rx Frames. |
| 1.3.6.1.4.1.164.8.8.4.1.20 | ColumnpktSwchFrIfCllmTxFrames | read-only | current | The number of CLLM Tx Frames. |
| 1.3.6.1.4.1.164.8.8.4.1.21 | ColumnpktSwchFrIfCllmRxFrames | read-only | current | The number of CLLM Rx Frames. |
| 1.3.6.1.4.1.164.8.8.4.1.22 | ColumnpktSwchFrIfTxCongestions | read-only | current | The number of Tx congestions. |
| 1.3.6.1.4.1.164.8.8.4.1.23 | ColumnpktSwchFrIfRxCongestions | read-only | current | The number of Rx congestions. |
| 1.3.6.1.4.1.164.8.8.4.1.24 | ColumnpktSwchFrIfTotDlciNumber | read-only | current | The total number of DLCIs defined. |
| 1.3.6.1.4.1.164.8.8.5 | TablepktSwchFrCircuitSTable | not-accessible | current | The Frame Relay Scratch Circuit Table includes configurable objects provided by the PS that are not included in RFC 1315. |
| 1.3.6.1.4.1.164.8.8.5.1 | RowpktSwchFrCircuitSEntry | not-accessible | current | Defines the contents of each line in the RAD PS Frame Relay Circuit Scratch Table. |
| 1.3.6.1.4.1.164.8.8.5.1.1 | ColumnpktSwchFrCircuitIfIndexS | read-only | current | This is the ifIndex of the circuit, according to RFC 1573. |
| 1.3.6.1.4.1.164.8.8.5.1.2 | ColumnpktSwchFrCircuitIndexS | read-only | current | This Index is the DLCI of the circuit. |
| 1.3.6.1.4.1.164.8.8.5.1.3 | ColumnpktSwchFrCircuitDestProtS | read-write | current | The protocol encapsulation, if any, on this DLCI. The MPE protocol is a proprietary RAD protocol that enables a generic HDLC device to have multiple connection… |
| 1.3.6.1.4.1.164.8.8.5.1.4 | ColumnpktSwchFrCircuitDestIdS | read-write | current | If the DLCI destination protocol is none or async, this field has a value of an existing DLCI or async channel, respectively. Otherwise, a value of zero is use… |
| 1.3.6.1.4.1.164.8.8.5.1.5 | ColumnpktSwchFrCircuitBackIdS | read-write | current | The backup DLCI which is used when the current DLCI goes inactive. The destination protocol and destination id are the same as in the current DLCI |
| 1.3.6.1.4.1.164.8.8.5.1.6 | ColumnpktSwchFrCircuitTxCirIntervalS | read-write | current | The Tx CIR interval in 1/10 seconds. |
| 1.3.6.1.4.1.164.8.8.5.1.7 | ColumnpktSwchFrCircuitTxCommittedS | read-write | current | The Tx committed rate in bytes per interval. |
| 1.3.6.1.4.1.164.8.8.5.1.8 | ColumnpktSwchFrCircuitTxExcessS | read-write | current | The Tx excess in bytes per interval. |
| 1.3.6.1.4.1.164.8.8.5.1.9 | ColumnpktSwchFrCircuitRxCirIntervalS | read-write | current | The Rx CIR interval in 1/10 seconds. |
| 1.3.6.1.4.1.164.8.8.5.1.10 | ColumnpktSwchFrCircuitRxCommittedS | read-write | current | The Rx committed rate in bytes per interval. |
| 1.3.6.1.4.1.164.8.8.5.1.11 | ColumnpktSwchFrCircuitRxExcessS | read-write | current | The Rx excess in bytes per interval. |
| 1.3.6.1.4.1.164.8.8.5.1.12 | ColumnpktSwchFrCircuitFunnelIdS | read-write | current | The funnel ID. |
| 1.3.6.1.4.1.164.8.8.5.1.13 | ColumnpktSwchFrCircuitStatusS | read-write | current | The status of the circuit row in the Table. |
| 1.3.6.1.4.1.164.8.8.5.1.14 | ColumnpktSwchFrCircuitExtendedDlciS | read-only | current | The no. of the DLCI represented in 23 bits. |
| 1.3.6.1.4.1.164.8.8.5.1.15 | ColumnpktSwchFrCircuitTxPriorityS | read-write | current | DLCI TX Priority level. The levels are defined in the pktSwchTxPriorityTable |
| 1.3.6.1.4.1.164.8.8.5.1.16 | ColumnpktSwchFrCircuitIsdnRoutIdS | read-write | current | ISDN destination. ID in the ISDN routing table containing the outgoing ISDN address for this DLCI. Default value: 0 for no ISDN routing ID. |
| 1.3.6.1.4.1.164.8.8.6 | TablepktSwchFrCircuitATable | not-accessible | current | The Frame Relay Active Circuit Table includes statistics and configurable objects provided by the PS that are not included in RFC 1315. |
| 1.3.6.1.4.1.164.8.8.6.1 | RowpktSwchFrCircuitAEntry | not-accessible | current | Defines the contents of each line in the RAD PS Frame Relay Circuit Active Table. |
| 1.3.6.1.4.1.164.8.8.6.1.1 | ColumnpktSwchFrCircuitIfIndexA | read-only | current | This is the ifIndex of the circuit, according to RFC 1573. |
| 1.3.6.1.4.1.164.8.8.6.1.2 | ColumnpktSwchFrCircuitIndexA | read-only | current | This Index is the DLCI of the circuit. |
| 1.3.6.1.4.1.164.8.8.6.1.3 | ColumnpktSwchFrCircuitDestProtA | read-only | current | The protocol encapsulation, if any, on this DLCI. The MPE protocol is a proprietary RAD protocol that enables a generic HDLC device to have multiple connection… |
| 1.3.6.1.4.1.164.8.8.6.1.4 | ColumnpktSwchFrCircuitDestIdA | read-only | current | If the DLCI destination protocol is none or async, this field has a value of an existing DLCI or async channel, respectively. Otherwise, a value of zero is use… |
| 1.3.6.1.4.1.164.8.8.6.1.5 | ColumnpktSwchFrCircuitBackIdA | read-only | current | The backup DLCI which is used when the current DLCI goes inactive. The destination protocol and destination id are the same as in the current DLCI |
| 1.3.6.1.4.1.164.8.8.6.1.6 | ColumnpktSwchFrCircuitTxCirIntervalA | read-only | current | The Tx CIR interval in 1/10 seconds. |
| 1.3.6.1.4.1.164.8.8.6.1.7 | ColumnpktSwchFrCircuitTxCommittedA | read-only | current | The Tx committed rate in bytes per interval. |
| 1.3.6.1.4.1.164.8.8.6.1.8 | ColumnpktSwchFrCircuitTxExcessA | read-only | current | The Tx excess in bytes per interval. |
| 1.3.6.1.4.1.164.8.8.6.1.9 | ColumnpktSwchFrCircuitRxCirIntervalA | read-only | current | The Rx CIR interval in 1/10 seconds. |
| 1.3.6.1.4.1.164.8.8.6.1.10 | ColumnpktSwchFrCircuitRxCommittedA | read-only | current | The Rx committed rate in bytes per interval. |
| 1.3.6.1.4.1.164.8.8.6.1.11 | ColumnpktSwchFrCircuitRxExcessA | read-only | current | The Rx excess in bytes per interval. |
| 1.3.6.1.4.1.164.8.8.6.1.12 | ColumnpktSwchFrCircuitFunnelIdA | read-only | current | The funnel ID. |
| 1.3.6.1.4.1.164.8.8.6.1.13 | ColumnpktSwchFrCircuitFunnelStat | read-only | current | The funnel status. |
| 1.3.6.1.4.1.164.8.8.6.1.14 | ColumnpktSwchFrCircuitTxCongDiscards | read-only | current | The number of frames discarded because of Tx congestion. |
| 1.3.6.1.4.1.164.8.8.6.1.15 | ColumnpktSwchFrCircuitDeTxFrames | read-only | current | The number of DE Tx frames. |
| 1.3.6.1.4.1.164.8.8.6.1.16 | ColumnpktSwchFrCircuitDeRxFrames | read-only | current | The number of DE Rx frames. |
| 1.3.6.1.4.1.164.8.8.6.1.17 | ColumnpktSwchFrCircuitFecnTxFrames | read-only | current | The number of FECN Tx frames. |
| 1.3.6.1.4.1.164.8.8.6.1.18 | ColumnpktSwchFrCircuitBecnTxFrames | read-only | current | The number of BECN Tx frames. |
| 1.3.6.1.4.1.164.8.8.6.1.19 | ColumnpktSwchFrCircuitCommRateViolTxFrames | read-only | current | The number of Tx committed rate violations in number of frames. |
| 1.3.6.1.4.1.164.8.8.6.1.20 | ColumnpktSwchFrCircuitCommRateViolRxFrames | read-only | current | The number of Rx committed rate violations in number of frames. |
| 1.3.6.1.4.1.164.8.8.6.1.21 | ColumnpktSwchFrCircuitExcessRateViolTxFrames | read-only | current | The number of Tx excess rate violations in number of frames. |
| 1.3.6.1.4.1.164.8.8.6.1.22 | ColumnpktSwchFrCircuitExcessRateViolRxFrames | read-only | current | The number of Rx excess rate violations in number of frames. |
| 1.3.6.1.4.1.164.8.8.6.1.23 | ColumnpktSwchFrCircuitState | read-only | current | Indicates whether the particular virtual cir- cuit is new or not. |
| 1.3.6.1.4.1.164.8.8.6.1.24 | ColumnpktSwchFrCircuitExtendedDlciA | read-only | current | The no. of the DLCI represented in 23 bits. |
| 1.3.6.1.4.1.164.8.8.6.1.25 | ColumnpktSwchFrCircuitTxPriorityA | read-only | current | DLCI TX Priority level. The levels are defined in the pktSwchTxPriorityTable |
| 1.3.6.1.4.1.164.8.8.6.1.26 | ColumnpktSwchFrCircuitIsdnRoutIdA | read-only | current | ISDN destination. ID in the ISDN routing table containing the outgoing ISDN address for this DLCI. Default value: 0 for no ISDN routing ID. |
| 1.3.6.1.4.1.164.8.8.7 | TablepktSwchFrFunnelSTable | not-accessible | current | The Frame Relay Funnel Table defines the funnels that DLCIs may use. |
| 1.3.6.1.4.1.164.8.8.7.1 | RowpktSwchFrFunnelSEntry | not-accessible | current | Defines the contents of each line in the RAD PS Frame Relay Funnel Table. |
| 1.3.6.1.4.1.164.8.8.7.1.1 | ColumnpktSwchFrFunnelIndexS | read-only | current | This is the index of the funnel table. |
| 1.3.6.1.4.1.164.8.8.7.1.2 | ColumnpktSwchFrFunnelSizeS | read-write | current | The number of frames the funnel can store internally, where each frame is 512 bytes. |
| 1.3.6.1.4.1.164.8.8.7.1.3 | ColumnpktSwchFrFunnelHighWaterFramesS | read-write | current | The maximum number of frames the funnel can hold before it expands and transmits all the data. |
| 1.3.6.1.4.1.164.8.8.7.1.4 | ColumnpktSwchFrFunnelHighWaterBytesS | read-write | current | The maximum number of bytes the funnel can hold before it expands and transmits all the data. |
| 1.3.6.1.4.1.164.8.8.7.1.5 | ColumnpktSwchFrFunnelGaugeTxRateS | read-write | current | The outgoing data rate in bytes per window of the funnel. |
| 1.3.6.1.4.1.164.8.8.7.1.6 | ColumnpktSwchFrFunnelTransWindowS | read-write | current | The transmission rate is measured during a sliding time window. This parameter defines the window in 1/10 seconds. |
| 1.3.6.1.4.1.164.8.8.7.1.7 | ColumnpktSwchFrFunnelStatusS | read-write | current | The status of this funnel table entry. The choices are those defined in the SNMPv2 Textual Conventions for RowStatus. This will allow easy replacement of the I… |
| 1.3.6.1.4.1.164.8.8.8 | TablepktSwchFrFunnelATable | not-accessible | current | The Frame Relay Funnel Table defines the funnels that DLCIs may use. |
| 1.3.6.1.4.1.164.8.8.8.1 | RowpktSwchFrFunnelAEntry | not-accessible | current | Defines the contents of each line in the RAD PS Frame Relay Funnel Table. |
| 1.3.6.1.4.1.164.8.8.8.1.1 | ColumnpktSwchFrFunnelIndexA | read-only | current | This is the index of the funnel table. |
| 1.3.6.1.4.1.164.8.8.8.1.2 | ColumnpktSwchFrFunnelSizeA | read-only | current | The number of frames the funnel can store internally, where each frame is 512 bytes. |
| 1.3.6.1.4.1.164.8.8.8.1.3 | ColumnpktSwchFrFunnelHighWaterFramesA | read-only | current | The maximum number of frames the funnel can hold before it expands and transmits all the data. |
| 1.3.6.1.4.1.164.8.8.8.1.4 | ColumnpktSwchFrFunnelHighWaterBytesA | read-only | current | The maximum number of bytes the funnel can hold before it expands and transmits all the data. |
| 1.3.6.1.4.1.164.8.8.8.1.5 | ColumnpktSwchFrFunnelGaugeTxRateA | read-only | current | The outgoing data rate in bytes per window of the funnel. |
| 1.3.6.1.4.1.164.8.8.8.1.6 | ColumnpktSwchFrFunnelTransWindowA | read-only | current | The transmission rate is measured during a sliding time window. This parameter defines the window in 1/10 seconds. |
| 1.3.6.1.4.1.164.8.8.9 | TablepktSwchFrDlciMapTable | not-accessible | current | The Frame Relay Dlci mapping Table maps the Dlci numbers. For each long Dlci a short one is mapped. A long Dlci is a Dlci which contains a Dlci header of 3 or … |
| 1.3.6.1.4.1.164.8.8.9.1 | RowpktSwchFrDlciMapEntry | not-accessible | current | Defines the contents of each Dlci Map Table entry. |
| 1.3.6.1.4.1.164.8.8.9.1.1 | ColumnpktSwchFrDlciMapPort | read-only | current | Frame Relay port no. : 1-8 for FPS-8, 1-4 for FPS-4, 1-3 for APS, 1-6 for SPS-6, 1-12 for SPS-12. |
| 1.3.6.1.4.1.164.8.8.9.1.2 | ColumnpktSwchFrDlciMapLongDlci | read-only | current | The Long Dlci number. For Dlci's of 4 octets, the long Dlci number has values from 1024 to 8,388,607. For Dlci's of 2 octets, the long Dlci number has values o… |
| 1.3.6.1.4.1.164.8.8.9.1.3 | ColumnpktSwchFrDlciMapShortDlci | read-only | current | The Short Dlci number. Legal values: 0 - 1023. |
| 1.3.6.1.4.1.164.8.8.9.1.4 | ColumnpktSwchFrDlciMapStatus | read-write | current | The status of the map row in the Table. The only value which can be set is: createRequest. This value is set when a new long dlci is created. |
| 1.3.6.1.4.1.164.8.9 | NodepktSwchMpe | |||
| 1.3.6.1.4.1.164.8.9.1 | TablepktSwchMpeSTable | not-accessible | current | The MPE Table defines Scratch configuration parameters for the MPE protocol. |
| 1.3.6.1.4.1.164.8.9.1.1 | RowpktSwchMpeSEntry | not-accessible | current | Defines the contents of each line in the MPE Table. |
| 1.3.6.1.4.1.164.8.9.1.1.1 | ColumnpktSwchMpeLinkNumberS | read-only | current | The link number with which this entry is associated. This value corresponds to pktSwchPhyInterfaceNumber. There is an entry for each link for which the pktSwch… |
| 1.3.6.1.4.1.164.8.9.1.1.2 | ColumnpktSwchMpeInactivityS | read-write | current | The amount of time in minutes of inactivity that will cause the session to disconnect. |
| 1.3.6.1.4.1.164.8.9.1.1.3 | ColumnpktSwchMpeX25FacilitiesS | read-write | current | This specifies the X.25 facilities. The value is a sum of values (powers of two), where each value in the sum represents an option. The values that may be incl… |
| 1.3.6.1.4.1.164.8.9.1.1.4 | ColumnpktSwchMpeLocSubAddr1S | read-write | current | The first local subaddress. |
| 1.3.6.1.4.1.164.8.9.1.1.5 | ColumnpktSwchMpeLocSubAddr2S | read-write | current | The second local subaddress. |
| 1.3.6.1.4.1.164.8.9.1.1.6 | ColumnpktSwchMpeFlwCtrlDurS | read-write | current | The duration in 50 milliseconds of a hardware flow control signal. Default is 0 |
| 1.3.6.1.4.1.164.8.9.1.1.7 | ColumnpktSwchMpeFlwCtrlOptS | read-write | current | This specifies the type of flow control of the MPE link. The value is a sum of values (powers of two), where each value in the sum represents an option. The va… |
| 1.3.6.1.4.1.164.8.9.1.1.8 | ColumnpktSwchMpeFlwCtrlBufS | read-write | current | The number of buffers that will be allocated for the MPE link. |
| 1.3.6.1.4.1.164.8.9.1.1.9 | ColumnpktSwchMpeInternalClkS | read-write | current | The baud rate of the internal clock. |
| 1.3.6.1.4.1.164.8.9.2 | TablepktSwchMpeATable | not-accessible | current | The MPE Table defines Active configuration parameters for the MPE protocol. |
| 1.3.6.1.4.1.164.8.9.2.1 | RowpktSwchMpeAEntry | not-accessible | current | Defines the contents of each line in the MPE Table. |
| 1.3.6.1.4.1.164.8.9.2.1.1 | ColumnpktSwchMpeLinkNumberA | read-only | current | The link number with which this entry is associated. This value corresponds to pktSwchPhyInterfaceNumber. There is an entry for each link for which the pktSwch… |
| 1.3.6.1.4.1.164.8.9.2.1.2 | ColumnpktSwchMpeInactivityA | read-only | current | The amount of time in minutes of inactivity that will cause the session to disconnect. |
| 1.3.6.1.4.1.164.8.9.2.1.3 | ColumnpktSwchMpeX25FacilitiesA | read-only | current | This specifies the X.25 facilities. The value is a sum of values (powers of two), where each value in the sum represents an option. The values that may be incl… |
| 1.3.6.1.4.1.164.8.9.2.1.4 | ColumnpktSwchMpeLocSubAddr1A | read-only | current | The first local subaddress. |
| 1.3.6.1.4.1.164.8.9.2.1.5 | ColumnpktSwchMpeLocSubAddr2A | read-only | current | The second local subaddress. |
| 1.3.6.1.4.1.164.8.9.2.1.6 | ColumnpktSwchMpeFlwCtrlDurA | read-only | current | The duration in 50 milliseconds of a hardware flow control signal. |
| 1.3.6.1.4.1.164.8.9.2.1.7 | ColumnpktSwchMpeFlwCtrlOptA | read-only | current | This specifies the type of flow control of the MPE link. The value is a sum of values (powers of two), where each value in the sum represents an option. The va… |
| 1.3.6.1.4.1.164.8.9.2.1.8 | ColumnpktSwchMpeFlwCtrlBufA | read-only | current | The number of buffers that will be allocated for the MPE link. |
| 1.3.6.1.4.1.164.8.9.2.1.9 | ColumnpktSwchMpeInternalClkA | read-only | current | The baud rate of the internal clock. |
| 1.3.6.1.4.1.164.8.9.2.1.10 | ColumnpktSwchMpeCtsStatus | read-only | current | The CTS status. |
| 1.3.6.1.4.1.164.8.9.3 | TablepktSwchMpeAidSTable | not-accessible | current | The AID Table defines Scratch configuration parameters for the logical connections (Address Id). |
| 1.3.6.1.4.1.164.8.9.3.1 | RowpktSwchMpeAidSEntry | not-accessible | current | Defines the contents of each line in the MPE Table. |
| 1.3.6.1.4.1.164.8.9.3.1.1 | ColumnpktSwchMpeAddressIdS | read-only | current | The Address Id (AID) with which this entry is associated. |
| 1.3.6.1.4.1.164.8.9.3.1.2 | ColumnpktSwchMpeAidMainTypeS | read-write | current | The protocol with which the AID is communicating. |
| 1.3.6.1.4.1.164.8.9.3.1.3 | ColumnpktSwchMpeAidMainIdS | read-write | current | The link number of the protocol with which the AID is communicating. The link number of the protocol with which the AID is communicating. For X.25 SVC this num… |
| 1.3.6.1.4.1.164.8.9.3.1.4 | ColumnpktSwchMpeAidMainSubIdS | read-write | current | The DLCI with which the AID is communicating. Sub ID is used only when Type is Frame Relay or Inner Comm. The DLCI or destination AID with which the current AI… |
| 1.3.6.1.4.1.164.8.9.3.1.5 | ColumnpktSwchMpeAidBackupTypeS | read-write | current | The protocol with which the AID is communicating on the backup. |
| 1.3.6.1.4.1.164.8.9.3.1.6 | ColumnpktSwchMpeAidBackupIdS | read-write | current | The link number of the protocol with which the AID is communicating on the backup. The link number of the protocol with which the AID is communicating. For X.2… |
| 1.3.6.1.4.1.164.8.9.3.1.7 | ColumnpktSwchMpeAidBackupSubIdS | read-write | current | The DLCI with which the AID is communicating. Sub ID is used only when Type is Frame Relay or Inner Comm. The DLCI or destination AID with which the current AI… |
| 1.3.6.1.4.1.164.8.9.3.1.8 | ColumnpktSwchMpeAidStatusS | read-write | current | The status of this Address Id table entry. |
| 1.3.6.1.4.1.164.8.9.4 | TablepktSwchMpeAidATable | not-accessible | current | The AID Table defines Active configuration parameters for the logical connections (Address Id). |
| 1.3.6.1.4.1.164.8.9.4.1 | RowpktSwchMpeAidAEntry | not-accessible | current | Defines the contents of each line in the MPE Table. |
| 1.3.6.1.4.1.164.8.9.4.1.1 | ColumnpktSwchMpeAddressIdA | read-only | current | The Address Id (AID) with which this entry is associated. |
| 1.3.6.1.4.1.164.8.9.4.1.2 | ColumnpktSwchMpeAidMainTypeA | read-only | current | The protocol with which the AID is communicating. |
| 1.3.6.1.4.1.164.8.9.4.1.3 | ColumnpktSwchMpeAidMainIdA | read-only | current | The link number of the protocol with which the AID is communicating. The link number of the protocol with which the AID is communicating. For X.25 SVC this num… |
| 1.3.6.1.4.1.164.8.9.4.1.4 | ColumnpktSwchMpeAidMainSubIdA | read-only | current | The DLCI with which the AID is communicating. Sub ID is used only when Type is Frame Relay or Inner Comm. The DLCI or destination AID with which the current AI… |
| 1.3.6.1.4.1.164.8.9.4.1.5 | ColumnpktSwchMpeAidBackupTypeA | read-only | current | The protocol with which the AID is communicating on the backup. |
| 1.3.6.1.4.1.164.8.9.4.1.6 | ColumnpktSwchMpeAidBackupIdA | read-only | current | The link number of the protocol with which the AID is communicating on the backup. The link number of the protocol with which the AID is communicating. For X.2… |
| 1.3.6.1.4.1.164.8.9.4.1.7 | ColumnpktSwchMpeAidBackupSubIdA | read-only | current | The DLCI with which the AID is communicating. Sub ID is used only when Type is Frame Relay or Inner Comm. The DLCI or destination AID with which the current AI… |
| 1.3.6.1.4.1.164.8.9.4.1.8 | ColumnpktSwchMpeAidConn | read-only | current | The connectivity status of the AID. |
| 1.3.6.1.4.1.164.8.9.4.1.9 | ColumnpktSwchMpeAidFlwCtrl | read-only | current | The Flow Control status of the AID. |
| 1.3.6.1.4.1.164.8.10 | NodepktSwchSlip | |||
| 1.3.6.1.4.1.164.8.10.1 | TablepktSwchSlipSTable | not-accessible | current | The Scratch Slip Table contains configuration information for Slip links |
| 1.3.6.1.4.1.164.8.10.1.1 | RowpktSwchSlipSEntry | not-accessible | current | Defines the contents of each line in the RAD Slip Table. |
| 1.3.6.1.4.1.164.8.10.1.1.1 | ColumnpktSwchSlipLinkNumberS | read-only | current | The link number with which this entry is associated. This value corresponds to pktSwchPhyInterfaceIfIndex. There is an entry for each link for which the pktSwc… |
| 1.3.6.1.4.1.164.8.10.1.1.2 | ColumnpktSwchSlipSpeedS | read-write | current | This parameter determines the rate of data transmission to and from the DTE. |
| 1.3.6.1.4.1.164.8.10.1.1.3 | ColumnpktSwchSlipFCOptionS | read-write | current | The flow control options 0 - No HARDWARE flow control 1..254 - Timer value (in 50ms intervals), when timer expires, flow control stops 255 - The timer is not u… |
| 1.3.6.1.4.1.164.8.10.1.1.4 | ColumnpktSwchSlipStopBitsS | read-write | current | This entry indicates the number of stop bits per character supported by the PAD. The options are either (1) one stop bit, (2) two stop bits, or (3) 1.5 stop bi… |
| 1.3.6.1.4.1.164.8.10.1.1.5 | ColumnpktSwchSlipBitPerCharS | read-write | current | The number of data bits per character supported by the Slip link. |
| 1.3.6.1.4.1.164.8.10.1.1.6 | ColumnpktSwchSlipParityS | read-write | current | This entry selects the type of parity to be checked and or generated by the PAD when radSPSProfileParTreat is a value other than 255. The options are (1) space… |
| 1.3.6.1.4.1.164.8.10.1.1.7 | ColumnpktSwchSlipIpAddressS | read-write | deprecated | The IP address connected to this Slip port. This variable is used when an automatic connection is done by the IP Routing. |
| 1.3.6.1.4.1.164.8.10.1.1.8 | ColumnpktSwchSlipIpMaskS | read-write | deprecated | The IP mask. This variable is used when an automatic connection by the IP Routing is done. |
| 1.3.6.1.4.1.164.8.10.1.1.9 | ColumnpktSwchSlipDefEncapsTypeS | read-write | deprecated | Destination protocol of this Slip port. This variable is used when a direct connection without IP Routing is done. |
| 1.3.6.1.4.1.164.8.10.1.1.10 | ColumnpktSwchSlipDefDestinationS | read-write | deprecated | Default destination for this Slip port. This variable is used when a direct connection without IP Routing is done. Possible values: Default : Not Used. X.25 PV… |
| 1.3.6.1.4.1.164.8.10.2 | TablepktSwchSlipATable | not-accessible | current | The Active Slip Table contains configuration information for Slip links |
| 1.3.6.1.4.1.164.8.10.2.1 | RowpktSwchSlipAEntry | not-accessible | current | Defines the contents of each line in the RAD Slip Table. |
| 1.3.6.1.4.1.164.8.10.2.1.1 | ColumnpktSwchSlipLinkNumberA | read-only | current | The link number with which this entry is associated. This value corresponds to pktSwchPhyInterfaceIfIndex. There is an entry for each link for which the pktSwc… |
| 1.3.6.1.4.1.164.8.10.2.1.2 | ColumnpktSwchSlipSpeedA | read-only | current | This parameter determines the rate of data transmission to and from the DTE. |
| 1.3.6.1.4.1.164.8.10.2.1.3 | ColumnpktSwchSlipFCOptionA | read-only | current | The flow control options 0 - No HARDWARE flow control 1..254 - Timer value (in 50ms intervals), when timer expires, flow control stops 255 - The timer is not u… |
| 1.3.6.1.4.1.164.8.10.2.1.4 | ColumnpktSwchSlipStopBitsA | read-only | current | This entry indicates the number of stop bits per character supported by the PAD. The options are either (1) one stop bit, (2) two stop bits, or (3) 1.5 stop bi… |
| 1.3.6.1.4.1.164.8.10.2.1.5 | ColumnpktSwchSlipBitPerCharA | read-only | current | The number of data bits per character supported by the Slip link. |
| 1.3.6.1.4.1.164.8.10.2.1.6 | ColumnpktSwchSlipParityA | read-only | current | This entry selects the type of parity to be checked and or generated by the PAD when radSPSProfileParTreat is a value other than 255. The options are (1) space… |
| 1.3.6.1.4.1.164.8.10.2.1.7 | ColumnpktSwchSlipIpAddressA | read-only | deprecated | The IP address connected to this Slip port. |
| 1.3.6.1.4.1.164.8.10.2.1.8 | ColumnpktSwchSlipIpMaskA | read-only | deprecated | The IP mask. |
| 1.3.6.1.4.1.164.8.10.2.1.9 | ColumnpktSwchSlipDefEncapsTypeA | read-only | deprecated | Destination protocol of this Slip port. |
| 1.3.6.1.4.1.164.8.10.2.1.10 | ColumnpktSwchSlipDefDestinationA | read-only | deprecated | Default destination for this Slip port. This variable is used when a direct connection without IP Routing is done. Possible values: Default : Not Used. X.25 PV… |
| 1.3.6.1.4.1.164.8.11 | NodepktSwchSna | |||
| 1.3.6.1.4.1.164.8.11.1 | TablepktSwchSnaSDLCLinkTableS | not-accessible | current | The SDLC Link Table defines the SDLC links configured on the PS. |
| 1.3.6.1.4.1.164.8.11.1.1 | RowpktSwchSnaSDLCLinkEntryS | not-accessible | current | SDLC Link Entry defines the contents of each link in the SDLC Link Table. |
| 1.3.6.1.4.1.164.8.11.1.1.1 | ColumnpktSwchSnaSDLCLinkTypeS | read-write | current | This parameter identifies whether this link operates as TPAD(Primary) or HPAD(Secondary) SDLC device. |
| 1.3.6.1.4.1.164.8.11.1.1.2 | ColumnpktSwchSnaSDLCLinkPUSharedS | read-write | current | This parameter defines whether the link participates with more than one PU or not. |
| 1.3.6.1.4.1.164.8.11.1.1.3 | ColumnpktSwchSnaSDLCLinkDuplexPhyS | read-write | current | This parameter describes whether the physical level of the SDLC line is half or full duplex. |
| 1.3.6.1.4.1.164.8.11.1.1.4 | ColumnpktSwchSnaSDLCLinkflagsS | read-write | current | Number of flags between frames. |
| 1.3.6.1.4.1.164.8.11.1.1.5 | ColumnpktSwchSnaSDLCLinkDuplexS | read-write | current | This parameter shows wether the link level is Two Way Alternate or Two Way Simultaneous. |
| 1.3.6.1.4.1.164.8.11.1.1.6 | ColumnpktSwchSnaSDLCLinkClockS | read-write | current | This parameter defines the link clock rate |
| 1.3.6.1.4.1.164.8.11.1.1.7 | ColumnpktSwchSnaSDLCLinkNRZS | read-write | current | This parameter describes the following combinations of NRZ, NRZI with FLAGS or IDLE between frames: Legal values: 1 - NRZ with FLAGs between frames. RTS is Con… |
| 1.3.6.1.4.1.164.8.11.2 | TablepktSwchSnaSDLCLinkTableA | not-accessible | current | The SDLC Link Table defines the SDLC links configured on the SPS. |
| 1.3.6.1.4.1.164.8.11.2.1 | RowpktSwchSnaSDLCLinkEntryA | not-accessible | current | SDLC Link Entry defines the contents of each link in the SDLC Link Table. |
| 1.3.6.1.4.1.164.8.11.2.1.1 | ColumnpktSwchSnaSDLCLinkTypeA | read-only | current | This parameter identifies whether this link operates as TPAD(Primary) or HPAD(Secondary) SDLC device. |
| 1.3.6.1.4.1.164.8.11.2.1.2 | ColumnpktSwchSnaSDLCLinkPUSharedA | read-only | current | This parameter defines whether the link participates with more than one PU or not. |
| 1.3.6.1.4.1.164.8.11.2.1.3 | ColumnpktSwchSnaSDLCLinkDuplexPhyA | read-only | current | This parameter describes whether the physical level of the SDLC line is half or full duplex. |
| 1.3.6.1.4.1.164.8.11.2.1.4 | ColumnpktSwchSnaSDLCLinkflagsA | read-only | current | Number of flags between frames. |
| 1.3.6.1.4.1.164.8.11.2.1.5 | ColumnpktSwchSnaSDLCLinkDuplexA | read-only | current | This parameter shows wether the link level is Two Way Alternate or Two Way Simultaneous. |
| 1.3.6.1.4.1.164.8.11.2.1.6 | ColumnpktSwchSnaSDLCLinkClockA | read-only | current | This parameter defines the link clock rate. |
| 1.3.6.1.4.1.164.8.11.2.1.7 | ColumnpktSwchSnaSDLCLinkNRZA | read-only | current | This parameter describes the following combinations of NRZ, NRZI with FLAGS or IDLE between frames: Legal values: 1 - NRZ with FLAGs between frames. RTS is Con… |
| 1.3.6.1.4.1.164.8.11.2.1.8 | ColumnpktSwchSnaSDLCLinkStatFrames | read-only | current | The number of frames received or transmitted via this link |
| 1.3.6.1.4.1.164.8.11.2.1.9 | ColumnpktSwchSnaSDLCLinkStatErrors | read-only | current | The number of error frames received. |
| 1.3.6.1.4.1.164.8.11.2.1.10 | ColumnpktSwchSnaSDLCLinkStatInvalidAddresses | read-only | current | The number of frames with wrong address received by this link. |
| 1.3.6.1.4.1.164.8.11.2.1.11 | ColumnpktSwchSnaSDLCLinkStatShortFrames | read-only | current | The number of short frames received by this link. |
| 1.3.6.1.4.1.164.8.11.3 | TablepktSwchSnaPUTableS | not-accessible | current | The SDLC PU table defines the PUs configured on the PS. |
| 1.3.6.1.4.1.164.8.11.3.1 | RowpktSwchSnaPUEntryS | not-accessible | current | SDLC PU Entry defines the contents of each PU in the SDLC PU Table. |
| 1.3.6.1.4.1.164.8.11.3.1.1 | ColumnpktSwchSnaPUNumberS | read-only | current | This parameter defines an identifier associated with the PU Entry which is unique within the SPS |
| 1.3.6.1.4.1.164.8.11.3.1.2 | ColumnpktSwchSnaPUXIDProcessingS | read-write | current | Exchange Identification (XID) processing. The following values are legal: 1 - Local XID handling 2 - End-to-End XID handling, Support for NON-Activation XID 3 … |
| 1.3.6.1.4.1.164.8.11.3.1.3 | ColumnpktSwchSnaPUEnableS | read-write | current | The PU runs or not at this specific time |
| 1.3.6.1.4.1.164.8.11.3.1.4 | ColumnpktSwchSnaPULinkATypeS | read-write | current | The PU link A type. |
| 1.3.6.1.4.1.164.8.11.3.1.5 | ColumnpktSwchSnaPULinkARoleS | read-write | current | The PU role for link A. Note that the role of an SDLC PU may not be changed. It is defined by the SDLC Link Type. |
| 1.3.6.1.4.1.164.8.11.3.1.6 | ColumnpktSwchSnaPULinkBTypeS | read-write | current | The PU partner link B type |
| 1.3.6.1.4.1.164.8.11.3.1.7 | ColumnpktSwchSnaPULinkBRoleS | read-write | current | The PU role for link B. Note that the role of an SDLC PU may not be changed. It is defined by the SDLC Link Type. |
| 1.3.6.1.4.1.164.8.11.3.1.8 | ColumnpktSwchSnaPUEntryStatusS | read-write | current | The status of this PU table entry. This Set request will fail if there are any conflicts between any of of the parameter values in any of the tables comprising… |
| 1.3.6.1.4.1.164.8.11.4 | TablepktSwchSnaPUTableA | not-accessible | current | The SDLC PU table defines the PUs configured on the PS. |
| 1.3.6.1.4.1.164.8.11.4.1 | RowpktSwchSnaPUEntryA | not-accessible | current | SDLC PU Entry defines the contents of each PU in the SDLC PU Table. |
| 1.3.6.1.4.1.164.8.11.4.1.1 | ColumnpktSwchSnaPUNumberA | read-only | current | This parameter defines an identifier associated with the PU Entry which is unique within the SPS |
| 1.3.6.1.4.1.164.8.11.4.1.2 | ColumnpktSwchSnaPUXIDProcessingA | read-only | current | The PU XID Processing |
| 1.3.6.1.4.1.164.8.11.4.1.3 | ColumnpktSwchSnaPUEnableA | read-only | current | The PU runs or not at this specific time |
| 1.3.6.1.4.1.164.8.11.4.1.4 | ColumnpktSwchSnaPULinkATypeA | read-only | current | The PU link type |
| 1.3.6.1.4.1.164.8.11.4.1.5 | ColumnpktSwchSnaPULinkARoleA | read-only | current | The PU role for link A |
| 1.3.6.1.4.1.164.8.11.4.1.6 | ColumnpktSwchSnaPULinkBTypeA | read-only | current | The PU partner link type |
| 1.3.6.1.4.1.164.8.11.4.1.7 | ColumnpktSwchSnaPULinkBRoleA | read-only | current | The PU role for link B |
| 1.3.6.1.4.1.164.8.11.5 | TablepktSwchSnaPUSdlcTableS | not-accessible | current | Defines links for PUs running on SDLC link |
| 1.3.6.1.4.1.164.8.11.5.1 | RowpktSwchSnaPUSdlcEntryS | not-accessible | current | Defines parameters of a link for a PU running on an SDLC link |
| 1.3.6.1.4.1.164.8.11.5.1.1 | ColumnpktSwchSnaPUSdlcNumberS | read-only | current | This parameter defines an identifier associated with the PU Entry SDLC side, which is unique within the SPS |
| 1.3.6.1.4.1.164.8.11.5.1.2 | ColumnpktSwchSnaPUSdlcSideS | read-only | current | Is this side A or side B of the PU definition |
| 1.3.6.1.4.1.164.8.11.5.1.3 | ColumnpktSwchSnaPUSdlcAddressS | read-write | current | SNA SDLC PU address. Range: 0x00-0xFE |
| 1.3.6.1.4.1.164.8.11.5.1.4 | ColumnpktSwchSnaPUSdlcIfIndexS | read-write | current | ifIndex of the SDLC link |
| 1.3.6.1.4.1.164.8.11.5.1.5 | ColumnpktSwchSnaPUSdlcIdBlkS | read-write | current | Part of the IBM device ID (the full ID is defined by the IDBLK and the IDNUM). The Idblk is required for secondary PU with Local XID handling. Up to 3 Hexadeci… |
| 1.3.6.1.4.1.164.8.11.5.1.6 | ColumnpktSwchSnaPUSdlcIdNumS | read-write | current | Second part of the IBM device ID (the full ID is defined by the IDBLK and the IDNUM). The Idnum is required for secondary PU with Local XID handling. Up to 5 H… |
| 1.3.6.1.4.1.164.8.11.5.1.7 | ColumnpktSwchSnaPUSdlcMaxPiuSizeS | read-write | current | Maximum Path Information Size |
| 1.3.6.1.4.1.164.8.11.5.1.8 | ColumnpktSwchSnaPUSdlcTxWindowS | read-write | current | Window Size(in frames) used when sending from the SPS. Range: 1-7. |
| 1.3.6.1.4.1.164.8.11.5.1.9 | ColumnpktSwchSnaPUSdlcGrpAddressS | read-write | current | SNA Group address used by the SPS when sending polls (TPAD ONLY). Range: 0x00-0xFE |
| 1.3.6.1.4.1.164.8.11.5.1.10 | ColumnpktSwchSnaPUSdlcPollTimerS | read-write | current | Time in between polls in 50 millisecond increments (TPAD ONLY). Range: 1-65535. |
| 1.3.6.1.4.1.164.8.11.5.1.11 | ColumnpktSwchSnaPUSdlcXIDInitiationS | read-write | current | This parameter is not applicable for PU with Local XID handling. Legal values: 1 - Do not initiate an XID message. 2 - Initiate an XID message to SDLC. |
| 1.3.6.1.4.1.164.8.11.5.1.12 | ColumnpktSwchSnaPUSdlcEntryStatusS | read-write | current | The status of this PU Sdlc table entry. In order to save this entry, set status to valid. An underCreation value is set by the Agent when this entry is updated. |
| 1.3.6.1.4.1.164.8.11.6 | TablepktSwchSnaPUSdlcTableA | not-accessible | current | Defines links for PUs running on an SDLC link |
| 1.3.6.1.4.1.164.8.11.6.1 | RowpktSwchSnaPUSdlcEntryA | not-accessible | current | Defines parameters of link for PU running on an SDLC link |
| 1.3.6.1.4.1.164.8.11.6.1.1 | ColumnpktSwchSnaPUSdlcNumberA | read-only | current | This parameter defines an identifier associated with the PU Entry SDLC side, which is unique within the SPS |
| 1.3.6.1.4.1.164.8.11.6.1.2 | ColumnpktSwchSnaPUSdlcSideA | read-only | current | Is this side A or side B of the PU definition |
| 1.3.6.1.4.1.164.8.11.6.1.3 | ColumnpktSwchSnaPUSdlcAddressA | read-only | current | SNA SDLC PU address. Range: 0x00-0xFE. |
| 1.3.6.1.4.1.164.8.11.6.1.4 | ColumnpktSwchSnaPUSdlcIfIndexA | read-only | current | ifIndex of the SDLC link |
| 1.3.6.1.4.1.164.8.11.6.1.5 | ColumnpktSwchSnaPUSdlcIdBlkA | read-only | current | Part of the IBM device ID (the full ID is defined by the IDBLK and the IDNUM). The Idblk is required for secondary PU with Local XID handling. Up to 3 Hexadeci… |
| 1.3.6.1.4.1.164.8.11.6.1.6 | ColumnpktSwchSnaPUSdlcIdNumA | read-only | current | Second part of the IBM device ID (the full ID is defined by the IDBLK and the IDNUM). The Idnum is required for secondary PU with Local XID handling. Up to 5 H… |
| 1.3.6.1.4.1.164.8.11.6.1.7 | ColumnpktSwchSnaPUSdlcMaxPiuSizeA | read-only | current | Maximum Path Information Size |
| 1.3.6.1.4.1.164.8.11.6.1.8 | ColumnpktSwchSnaPUSdlcTxWindowA | read-only | current | Window Size(in frames) used when sending from the SPS. Range: 1-7. |
| 1.3.6.1.4.1.164.8.11.6.1.9 | ColumnpktSwchSnaPUSdlcGrpAddressA | read-only | current | SNA Group address used by the SPS when sending polls (TPAD ONLY). Range: 0x00-0xFE. |
| 1.3.6.1.4.1.164.8.11.6.1.10 | ColumnpktSwchSnaPUSdlcPollTimerA | read-only | current | Time in between polls in 50 millisecond increments (TPAD ONLY). Range: 1-65535. |
| 1.3.6.1.4.1.164.8.11.6.1.11 | ColumnpktSwchSnaPUSdlcXIDInitiationA | read-only | current | This parameter is not applicable for PU with Local XID handling. Legal values: 1 - Do not initiate an XID message. 2 - Initiate an XID message to SDLC. |
| 1.3.6.1.4.1.164.8.11.7 | TablepktSwchSnaPUSdlcStatTable | not-accessible | current | Shows Link Statistics for PUs running on an SDLC link |
| 1.3.6.1.4.1.164.8.11.7.1 | RowpktSwchSnaPUSdlcStatEntry | not-accessible | current | Shows Link Statistics for PUs running on an SDLC link |
| 1.3.6.1.4.1.164.8.11.7.1.1 | ColumnpktSwchSnaPUSdlcStatNumber | read-only | current | This parameter defines an identifier associated with the PU Entry SDLC side statistics, which is unique within the SPS |
| 1.3.6.1.4.1.164.8.11.7.1.2 | ColumnpktSwchSnaPUSdlcStatSide | read-only | current | Is this side A or side B of the PU definition |
| 1.3.6.1.4.1.164.8.11.7.1.3 | ColumnpktSwchSnaPUSdlcStatOctetsIn | read-only | current | |
| 1.3.6.1.4.1.164.8.11.7.1.4 | ColumnpktSwchSnaPUSdlcStatOctetsOut | read-only | current | |
| 1.3.6.1.4.1.164.8.11.7.1.5 | ColumnpktSwchSnaPUSdlcStatIFramesIn | read-only | current | |
| 1.3.6.1.4.1.164.8.11.7.1.6 | ColumnpktSwchSnaPUSdlcStatIFramesOut | read-only | current | |
| 1.3.6.1.4.1.164.8.11.7.1.7 | ColumnpktSwchSnaPUSdlcStatRRFramesIn | read-only | current | |
| 1.3.6.1.4.1.164.8.11.7.1.8 | ColumnpktSwchSnaPUSdlcStatRRFramesOut | read-only | current | |
| 1.3.6.1.4.1.164.8.11.7.1.9 | ColumnpktSwchSnaPUSdlcStatRNRFramesIn | read-only | current | |
| 1.3.6.1.4.1.164.8.11.7.1.10 | ColumnpktSwchSnaPUSdlcStatRNRFramesOut | read-only | current | |
| 1.3.6.1.4.1.164.8.11.7.1.11 | ColumnpktSwchSnaPUSdlcStatXIDsIn | read-only | current | |
| 1.3.6.1.4.1.164.8.11.7.1.12 | ColumnpktSwchSnaPUSdlcStatXIDsOut | read-only | current | |
| 1.3.6.1.4.1.164.8.11.7.1.13 | ColumnpktSwchSnaPUSdlcStatTESTsIn | read-only | current | |
| 1.3.6.1.4.1.164.8.11.7.1.14 | ColumnpktSwchSnaPUSdlcStatTESTsOut | read-only | current | |
| 1.3.6.1.4.1.164.8.11.7.1.15 | ColumnpktSwchSnaPUSdlcStatREJsIn | read-only | current | |
| 1.3.6.1.4.1.164.8.11.7.1.16 | ColumnpktSwchSnaPUSdlcStatREJsOut | read-only | current | |
| 1.3.6.1.4.1.164.8.11.7.1.17 | ColumnpktSwchSnaPUSdlcStatFRMRsIn | read-only | current | |
| 1.3.6.1.4.1.164.8.11.7.1.18 | ColumnpktSwchSnaPUSdlcStatFRMRsOut | read-only | current | |
| 1.3.6.1.4.1.164.8.11.7.1.19 | ColumnpktSwchSnaPUSdlcStatDISCsIn | read-only | current | |
| 1.3.6.1.4.1.164.8.11.7.1.20 | ColumnpktSwchSnaPUSdlcStatDISCsOut | read-only | current | |
| 1.3.6.1.4.1.164.8.11.7.1.21 | ColumnpktSwchSnaPUSdlcStatUAsIn | read-only | current | |
| 1.3.6.1.4.1.164.8.11.7.1.22 | ColumnpktSwchSnaPUSdlcStatUAsOut | read-only | current | |
| 1.3.6.1.4.1.164.8.11.7.1.23 | ColumnpktSwchSnaPUSdlcStatDMsIn | read-only | current | |
| 1.3.6.1.4.1.164.8.11.7.1.24 | ColumnpktSwchSnaPUSdlcStatDMsOut | read-only | current | |
| 1.3.6.1.4.1.164.8.11.7.1.25 | ColumnpktSwchSnaPUSdlcStatSNRMsIn | read-only | current | |
| 1.3.6.1.4.1.164.8.11.7.1.26 | ColumnpktSwchSnaPUSdlcStatSNRMsOut | read-only | current | |
| 1.3.6.1.4.1.164.8.11.7.1.27 | ColumnpktSwchSnaPUSdlcStatRetransmitsIn | read-only | current | |
| 1.3.6.1.4.1.164.8.11.7.1.28 | ColumnpktSwchSnaPUSdlcStatRetransmitsOut | read-only | current | |
| 1.3.6.1.4.1.164.8.11.7.1.29 | ColumnpktSwchSnaPUSdlcUpperState | read-only | current | The internal DLPI state of the connection. |
| 1.3.6.1.4.1.164.8.11.7.1.30 | ColumnpktSwchSnaPUSdlcLowerState | read-only | current | The internal SDLC state of the connection. |
| 1.3.6.1.4.1.164.8.11.7.1.31 | ColumnpktSwchSnaPUSdlcStatNRMStatus | read-only | current | This variable indicates if the link is in Normal Response Mode or not. |
| 1.3.6.1.4.1.164.8.11.7.1.32 | ColumnpktSwchSnaPUSdlcStatFlowCtlStatus | read-only | current | This variable indicates the flow control status of the PU interface. |
| 1.3.6.1.4.1.164.8.11.8 | TablepktSwchSnaPUSX25QllcTableS | not-accessible | current | Defines links for PUs running on a QLLC link |
| 1.3.6.1.4.1.164.8.11.8.1 | RowpktSwchSnaPUX25QllcEntryS | not-accessible | current | Defines parameters for PU side running on SDLC link |
| 1.3.6.1.4.1.164.8.11.8.1.1 | ColumnpktSwchSnaPUX25QllcNumberS | read-only | current | This parameter defines an identifier associated with the PU Entry X25\QLLC side, which is unique within the SPS |
| 1.3.6.1.4.1.164.8.11.8.1.2 | ColumnpktSwchSnaPUX25QllcSideS | read-only | current | Is there side A or B of the PU connection |
| 1.3.6.1.4.1.164.8.11.8.1.3 | ColumnpktSwchSnaPUX25QllcIdBlkS | read-write | current | Part of the IBM device ID (the full ID is defined by the IDBLK and the IDNUM). The Idblk is required for secondary PU with Local XID handling. Up to 3 Hexadeci… |
| 1.3.6.1.4.1.164.8.11.8.1.4 | ColumnpktSwchSnaPUX25QllcIdNumS | read-write | current | Second part of the IBM device ID (the full ID is defined by the IDBLK and the IDNUM). The Idnum is required for secondary PU with Local XID handling. Up to 5 H… |
| 1.3.6.1.4.1.164.8.11.8.1.5 | ColumnpktSwchSnaPUX25QllcXIDInitS | read-write | current | This parameter is not applicable for PU with Local XID handling. Legal values: 1 - Do not initiate an XID message. 2 - Initiate an XID message to QLLC. |
| 1.3.6.1.4.1.164.8.11.8.1.6 | ColumnpktSwchSnaPUX25QllcMaxPiuSizeS | read-write | current | Maximum Path Information Size |
| 1.3.6.1.4.1.164.8.11.8.1.7 | ColumnpktSwchSnaPUX25QllcStationAddressS | read-write | current | QLLC PU Link Station Address. Range: 0x01-0xFE. This parameter is applicable only for PU with End-to-End XID handling, Support for NON-Activation XID. |
| 1.3.6.1.4.1.164.8.11.8.1.8 | ColumnpktSwchSnaPUX25QllcInPasswordS | read-write | current | A field matched with the call user data in call request packets for purposes of security and correlation. |
| 1.3.6.1.4.1.164.8.11.8.1.9 | ColumnpktSwchSnaPUX25QllcSubAddressS | read-write | current | The X.25 Sub-address associated with the PU Entry for routing incoming call indications. Range: 0-99. |
| 1.3.6.1.4.1.164.8.11.8.1.10 | ColumnpktSwchSnaPUX25QllcAutoCallS | read-write | current | This parameter indicates whether the SPS automatically initiates an X.25 call request or not. |
| 1.3.6.1.4.1.164.8.11.8.1.11 | ColumnpktSwchSnaPUX25QllcCalledAddressS | read-write | current | The destination x.25 DTE address to which the SPS calls. Used with AutoCall only. |
| 1.3.6.1.4.1.164.8.11.8.1.12 | ColumnpktSwchSnaPUX25QllcCallUserDataFacilitiesS | read-write | current | The X.25 facilities and Call User Data which the SPS uses on outgoing calls. AutoCall only. Up to 60 Hexa-Decimal digits. Each pair of digits represents a BYTE… |
| 1.3.6.1.4.1.164.8.11.8.1.13 | ColumnpktSwchSnaPUX25QllcEntryStatusS | read-write | current | The status of this PU Qllc table entry. In order to save this entry, set status to valid. An underCreation value is set by the Agent when this entry is updated. |
| 1.3.6.1.4.1.164.8.11.9 | TablepktSwchSnaPUX25QllcTableA | not-accessible | current | Defines links for PUs running on a QLLC link |
| 1.3.6.1.4.1.164.8.11.9.1 | RowpktSwchSnaPUX25QllcEntryA | not-accessible | current | Defines parameters for PU side running on an SDLC link |
| 1.3.6.1.4.1.164.8.11.9.1.1 | ColumnpktSwchSnaPUX25QllcNumberA | read-only | current | This parameter defines an identifier associated with the PU Entry X25\QLLC side, which is unique within the SPS |
| 1.3.6.1.4.1.164.8.11.9.1.2 | ColumnpktSwchSnaPUX25QllcSideA | read-only | current | Is there side A or B of the PU connection |
| 1.3.6.1.4.1.164.8.11.9.1.3 | ColumnpktSwchSnaPUX25QllcIdBlkA | read-only | current | Part of the IBM device ID (the full ID is defined by the IDBLK and the IDNUM). The Idblk is required for secondary PU with Local XID handling. Up to 3 Hexadeci… |
| 1.3.6.1.4.1.164.8.11.9.1.4 | ColumnpktSwchSnaPUX25QllcIdNumA | read-only | current | Second part of the IBM device ID (the full ID is defined by the IDBLK and the IDNUM). The Idnum is required for secondary PU with Local XID handling. Up to 5 H… |
| 1.3.6.1.4.1.164.8.11.9.1.5 | ColumnpktSwchSnaPUX25QllcXIDInitA | read-only | current | This parameter is not applicable for PU with Local XID handling. Legal values: 1 - Do not initiate an XID message. 2 - Initiate an XID message to QLLC. |
| 1.3.6.1.4.1.164.8.11.9.1.6 | ColumnpktSwchSnaPUX25QllcMaxPiuSizeA | read-only | current | Maximum Path Information Size |
| 1.3.6.1.4.1.164.8.11.9.1.7 | ColumnpktSwchSnaPUX25QllcStationAddressA | read-only | current | QLLC PU Link Station Address. Range: 0x01-0xFE. This parameter is applicable only for PU with End-to-End XID handling, Support for NON-Activation XID. |
| 1.3.6.1.4.1.164.8.11.9.1.8 | ColumnpktSwchSnaPUX25QllcInPasswordA | read-only | current | A field matched with the call user data in call request packets for purposes of security and correlation. |
| 1.3.6.1.4.1.164.8.11.9.1.9 | ColumnpktSwchSnaPUX25QllcSubAddressA | read-only | current | The X.25 Sub-address associated with the PU Entry for routing incoming call indications. Range: 0-99. |
| 1.3.6.1.4.1.164.8.11.9.1.10 | ColumnpktSwchSnaPUX25QllcAutoCallA | read-only | current | This parameter indicates whether the SPS automatically initiates an X.25 call request or not. |
| 1.3.6.1.4.1.164.8.11.9.1.11 | ColumnpktSwchSnaPUX25QllcCalledAddressA | read-only | current | The destination x.25 DTE address to which the SPS calls. Used with AutoCall only. |
| 1.3.6.1.4.1.164.8.11.9.1.12 | ColumnpktSwchSnaPUX25QllcCallUserDataFacilitiesA | read-only | current | The X.25 facilities and Call User Data which the SPS uses on outgoing calls. AutoCall only. Up to 60 Hexa-Decimal digits. Each pair of digits represents a BYTE… |
| 1.3.6.1.4.1.164.8.11.10 | TablepktSwchSnaPUX25QllcStatTable | not-accessible | current | Shows link statistics for PUs running on a QLLC link |
| 1.3.6.1.4.1.164.8.11.10.1 | RowpktSwchSnaPUX25QllcStatEntry | not-accessible | current | Shows link statistics for PUs running on a QLLC link |
| 1.3.6.1.4.1.164.8.11.10.1.1 | ColumnpktSwchSnaPUX25QllcStatNumber | read-only | current | This parameter defines an identifier associated with the PU Entry X25\QLLC side, which is unique within the SPS |
| 1.3.6.1.4.1.164.8.11.10.1.2 | ColumnpktSwchSnaPUX25QllcStatSide | read-only | current | Is there side A or B of the PU connection |
| 1.3.6.1.4.1.164.8.11.10.1.3 | ColumnpktSwchSnaPUX25QllcStatlink | read-only | current | The Link on which the Qllc conversation is conducted. If there is no conversation the variable will be 0. |
| 1.3.6.1.4.1.164.8.11.10.1.4 | ColumnpktSwchSnaPUX25QllcStatDataPacketsIn | read-only | current | |
| 1.3.6.1.4.1.164.8.11.10.1.5 | ColumnpktSwchSnaPUX25QllcStatDataPacketsOut | read-only | current | |
| 1.3.6.1.4.1.164.8.11.10.1.6 | ColumnpktSwchSnaPUX25QllcStatQSMPacketsIn | read-only | current | |
| 1.3.6.1.4.1.164.8.11.10.1.7 | ColumnpktSwchSnaPUX25QllcStatQSMPacketsOut | read-only | current | |
| 1.3.6.1.4.1.164.8.11.10.1.8 | ColumnpktSwchSnaPUX25QllcStatQDMPacketsIn | read-only | current | |
| 1.3.6.1.4.1.164.8.11.10.1.9 | ColumnpktSwchSnaPUX25QllcStatQDMPacketsOut | read-only | current | |
| 1.3.6.1.4.1.164.8.11.10.1.10 | ColumnpktSwchSnaPUX25QllcStatXIDPacketsIn | read-only | current | |
| 1.3.6.1.4.1.164.8.11.10.1.11 | ColumnpktSwchSnaPUX25QllcStatXIDPacketsOut | read-only | current | |
| 1.3.6.1.4.1.164.8.11.10.1.12 | ColumnpktSwchSnaPUX25QllcStatQDISCPacketsIn | read-only | current | |
| 1.3.6.1.4.1.164.8.11.10.1.13 | ColumnpktSwchSnaPUX25QllcStatQDISCPacketsOut | read-only | current | |
| 1.3.6.1.4.1.164.8.11.10.1.14 | ColumnpktSwchSnaPUX25QllcStatCallPacketsIn | read-only | current | |
| 1.3.6.1.4.1.164.8.11.10.1.15 | ColumnpktSwchSnaPUX25QllcStatCallPacketsOut | read-only | current | |
| 1.3.6.1.4.1.164.8.11.10.1.16 | ColumnpktSwchSnaPUX25QllcStatClearPacketsIn | read-only | current | |
| 1.3.6.1.4.1.164.8.11.10.1.17 | ColumnpktSwchSnaPUX25QllcStatClearPacketsOut | read-only | current | |
| 1.3.6.1.4.1.164.8.11.10.1.18 | ColumnpktSwchSnaPUX25QllcStatCallAcceptsIn | read-only | current | |
| 1.3.6.1.4.1.164.8.11.10.1.19 | ColumnpktSwchSnaPUX25QllcStatCallAcceptsOut | read-only | current | |
| 1.3.6.1.4.1.164.8.11.10.1.20 | ColumnpktSwchSnaPUX25QllcStatUpperState | read-only | current | The internal DLPI state of the connection. |
| 1.3.6.1.4.1.164.8.11.10.1.21 | ColumnpktSwchSnaPUX25QllcStatLowerState | read-only | current | The internal QLLC state of the connection. |
| 1.3.6.1.4.1.164.8.11.10.1.22 | ColumnpktSwchSnaPUX25QllcStatNRMStatus | read-only | current | This variable indicates if the link is in Normal Response Mode or not. |
| 1.3.6.1.4.1.164.8.11.10.1.23 | ColumnpktSwchSnaPUX25QllcStatFlowCtlStatus | read-only | current | This variable indicates the flow control status of the PU interface. |
| 1.3.6.1.4.1.164.8.11.11 | TablepktSwchSnaPULlc2FrTableS | not-accessible | current | Defines LLC2/Frame Relay/RFC1490 Protocol Interface of SPS SNA PU entity. |
| 1.3.6.1.4.1.164.8.11.11.1 | RowpktSwchSnaPULlc2FrEntryS | not-accessible | current | Defines parameters for PU LLC2 Protocol Interface over Frame Relay Protocol using RFC 1490. |
| 1.3.6.1.4.1.164.8.11.11.1.1 | ColumnpktSwchSnaPULlc2FrNumberS | read-only | current | Unique Identifier for this PU. The value in this field is used as a common Key in both this table and the Main PU table. |
| 1.3.6.1.4.1.164.8.11.11.1.2 | ColumnpktSwchSnaPULlc2FrSideS | read-only | current | Indicates for each side (SIDE-A and SIDE-B) if the Protocol Interface for that side has been defined or not. |
| 1.3.6.1.4.1.164.8.11.11.1.3 | ColumnpktSwchSnaPULlc2FrEncapsTypeS | read-write | current | Indicates if the LLC2/RFC1490 Protocol Interface uses the BNN, BAN or TREN method of Frame Encapsulation. |
| 1.3.6.1.4.1.164.8.11.11.1.4 | ColumnpktSwchSnaPULlc2FrDestMACS | read-write | current | The LLC2 Destination MAC Address. |
| 1.3.6.1.4.1.164.8.11.11.1.5 | ColumnpktSwchSnaPULlc2FrSrcSAPS | read-write | current | The LLC2 Source SAP Address. 2 Hex digits |
| 1.3.6.1.4.1.164.8.11.11.1.6 | ColumnpktSwchSnaPULlc2FrDestSAPS | read-write | current | The LLC2 Destination SAP. |
| 1.3.6.1.4.1.164.8.11.11.1.7 | ColumnpktSwchSnaPULlc2FrXIDIdBlkS | read-write | current | Part of the IBM device ID (the full ID is defined by the IDBLK and the IDNUM). The IDBLK is required for PU with Local XID handling or PU with End-to-End XID h… |
| 1.3.6.1.4.1.164.8.11.11.1.8 | ColumnpktSwchSnaPULlc2FrXIDIdNumS | read-write | current | Second part of the IBM device ID (the full ID is defined by the IDBLK and the IDNUM). The IDNUM is required for PU with Local XID handling or PU with End-to-En… |
| 1.3.6.1.4.1.164.8.11.11.1.9 | ColumnpktSwchSnaPULlc2FrMaxPiuSizeS | read-write | current | Maximum Path Information Size |
| 1.3.6.1.4.1.164.8.11.11.1.10 | ColumnpktSwchSnaPULlc2FrTxWindowS | read-write | current | The LLC2 Link Window Size. |
| 1.3.6.1.4.1.164.8.11.11.1.11 | ColumnpktSwchSnaPULlc2FrLinkS | read-write | current | The SPS Frame Relay Link Number which this LLC2 Protocol Interface is associated with. |
| 1.3.6.1.4.1.164.8.11.11.1.12 | ColumnpktSwchSnaPULlc2FrDLCIS | read-write | current | The SPS Frame Relay DLCI Number which this LLC2 Protocol Interface is associated with. |
| 1.3.6.1.4.1.164.8.11.11.1.13 | ColumnpktSwchSnaPULlc2FrXIDInitiationS | read-write | current | This parameter is not applicable for PU with Local XID handling. Legal values: 1 - Do not initiate an XID message. 2 - Initiate an XID message to LLC2. |
| 1.3.6.1.4.1.164.8.11.11.1.14 | ColumnpktSwchSnaPULlc2FrN2CountS | read-write | current | N2 Count |
| 1.3.6.1.4.1.164.8.11.11.1.15 | ColumnpktSwchSnaPULlc2FrT1TimerS | read-write | current | T1 Timer in 1/10 of a second. |
| 1.3.6.1.4.1.164.8.11.11.1.16 | ColumnpktSwchSnaPULlc2FrTiTimerS | read-write | current | TI Timer in seconds |
| 1.3.6.1.4.1.164.8.11.11.1.17 | ColumnpktSwchSnaPULlc2FrEntryStatusS | read-write | current | The status of this PU Llc2 table entry. In order to save this entry, set status to valid. An underCreation value is set by the Agent when this entry is updated. |
| 1.3.6.1.4.1.164.8.11.12 | TablepktSwchSnaPULlc2FrTableA | not-accessible | current | Defines links for PUs running on an LLC2 link |
| 1.3.6.1.4.1.164.8.11.12.1 | RowpktSwchSnaPULlc2FrEntryA | not-accessible | current | Defines parameters for PU LLC2 Protocol Interface over Frame Relay Protocol using RFC 1490. |
| 1.3.6.1.4.1.164.8.11.12.1.1 | ColumnpktSwchSnaPULlc2FrNumberA | read-only | current | Unique Identifier for this PU. The value in this field is used as a common Key in both this table and the Main PU table. |
| 1.3.6.1.4.1.164.8.11.12.1.2 | ColumnpktSwchSnaPULlc2FrSideA | read-only | current | Indicates for each side (SIDE-A and SIDE-B) if the Protocol Interface for that side has been defined or not. |
| 1.3.6.1.4.1.164.8.11.12.1.3 | ColumnpktSwchSnaPULlc2FrEncapsTypeA | read-only | current | Indicates if the LLC2/RFC1490 Protocol Interface uses the BNN, BAN or TREN method of Frame Encapsulation. |
| 1.3.6.1.4.1.164.8.11.12.1.4 | ColumnpktSwchSnaPULlc2FrDestMACA | read-only | current | The LLC2 Destination MAC Address. |
| 1.3.6.1.4.1.164.8.11.12.1.5 | ColumnpktSwchSnaPULlc2FrSrcSAPA | read-only | current | The LLC2 Source SAP Address. |
| 1.3.6.1.4.1.164.8.11.12.1.6 | ColumnpktSwchSnaPULlc2FrDestSAPA | read-only | current | The LLC2 Destination SAP. |
| 1.3.6.1.4.1.164.8.11.12.1.7 | ColumnpktSwchSnaPULlc2FrXIDIdBlkA | read-only | current | Part of the IBM device ID (the full ID is defined by the IDBLK and the IDNUM). The IDBLK is required for PU with Local XID handling or PU with End-to-End XID h… |
| 1.3.6.1.4.1.164.8.11.12.1.8 | ColumnpktSwchSnaPULlc2FrXIDIdNumA | read-only | current | Second part of the IBM device ID (the full ID is defined by the IDBLK and the IDNUM). The IDNUM is required for PU with Local XID handling or PU with End-to-En… |
| 1.3.6.1.4.1.164.8.11.12.1.9 | ColumnpktSwchSnaPULlc2FrMaxPiuSizeA | read-only | current | Maximum Path Information Size |
| 1.3.6.1.4.1.164.8.11.12.1.10 | ColumnpktSwchSnaPULlc2FrTxWindowA | read-only | current | The LLC2 Link Window Size. |
| 1.3.6.1.4.1.164.8.11.12.1.11 | ColumnpktSwchSnaPULlc2FrLinkA | read-only | current | The SPS Frame Relay Link Number which this LLC2 Protocol Interface is associated with. |
| 1.3.6.1.4.1.164.8.11.12.1.12 | ColumnpktSwchSnaPULlc2FrDLCIA | read-only | current | The SPS Frame Relay DLCI Number which this LLC2 Protocol Interface is associated with. |
| 1.3.6.1.4.1.164.8.11.12.1.13 | ColumnpktSwchSnaPULlc2FrXIDInitiationA | read-only | current | This parameter is not applicable for PU with Local XID handling. Legal values: 1 - Do not initiate an XID message. 2 - Initiate an XID message to LLC2. |
| 1.3.6.1.4.1.164.8.11.12.1.14 | ColumnpktSwchSnaPULlc2FrN2CountA | read-only | current | N2 Count |
| 1.3.6.1.4.1.164.8.11.12.1.15 | ColumnpktSwchSnaPULlc2FrT1TimerA | read-only | current | T1 Timer in 1/10 of a second. |
| 1.3.6.1.4.1.164.8.11.12.1.16 | ColumnpktSwchSnaPULlc2FrTiTimerA | read-only | current | TI Timer in seconds |
| 1.3.6.1.4.1.164.8.11.13 | TablepktSwchSnaPULlc2FrStatTable | not-accessible | current | Shows link statistics for PUs running on an LLC2 link |
| 1.3.6.1.4.1.164.8.11.13.1 | RowpktSwchSnaPULlc2FrStatEntry | not-accessible | current | Shows statistics for PU LLC2 Protocol Interface over Frame Relay Protocol using RFC 1490. |
| 1.3.6.1.4.1.164.8.11.13.1.1 | ColumnpktSwchSnaPULlc2FrStatNumber | read-only | current | Unique Identifier for this PU. The value in this field is used as a common Key in both this table and the Main PU table. |
| 1.3.6.1.4.1.164.8.11.13.1.2 | ColumnpktSwchSnaPULlc2FrStatSide | read-only | current | Indicates for each side (SIDE-A and SIDE-B) if the Protocol Interface for that side has been defined or not. |
| 1.3.6.1.4.1.164.8.11.13.1.3 | ColumnpktSwchSnaPULlc2FrStatOctetsIn | read-only | current | |
| 1.3.6.1.4.1.164.8.11.13.1.4 | ColumnpktSwchSnaPULlc2FrStatOctetsOut | read-only | current | |
| 1.3.6.1.4.1.164.8.11.13.1.5 | ColumnpktSwchSnaPULlc2FrStatIFramesIn | read-only | current | |
| 1.3.6.1.4.1.164.8.11.13.1.6 | ColumnpktSwchSnaPULlc2FrStatIFramesOut | read-only | current | |
| 1.3.6.1.4.1.164.8.11.13.1.7 | ColumnpktSwchSnaPULlc2FrStatRRFramesIn | read-only | current | |
| 1.3.6.1.4.1.164.8.11.13.1.8 | ColumnpktSwchSnaPULlc2FrStatRRFramesOut | read-only | current | |
| 1.3.6.1.4.1.164.8.11.13.1.9 | ColumnpktSwchSnaPULlc2FrStatRNRFramesIn | read-only | current | |
| 1.3.6.1.4.1.164.8.11.13.1.10 | ColumnpktSwchSnaPULlc2FrStatRNRFramesOut | read-only | current | |
| 1.3.6.1.4.1.164.8.11.13.1.11 | ColumnpktSwchSnaPULlc2FrStatXIDsIn | read-only | current | |
| 1.3.6.1.4.1.164.8.11.13.1.12 | ColumnpktSwchSnaPULlc2FrStatXIDsOut | read-only | current | |
| 1.3.6.1.4.1.164.8.11.13.1.13 | ColumnpktSwchSnaPULlc2FrStatTESTsIn | read-only | current | |
| 1.3.6.1.4.1.164.8.11.13.1.14 | ColumnpktSwchSnaPULlc2FrStatTESTsOut | read-only | current | |
| 1.3.6.1.4.1.164.8.11.13.1.15 | ColumnpktSwchSnaPULlc2FrStatREJsIn | read-only | current | |
| 1.3.6.1.4.1.164.8.11.13.1.16 | ColumnpktSwchSnaPULlc2FrStatREJsOut | read-only | current | |
| 1.3.6.1.4.1.164.8.11.13.1.17 | ColumnpktSwchSnaPULlc2FrStatFRMRsIn | read-only | current | |
| 1.3.6.1.4.1.164.8.11.13.1.18 | ColumnpktSwchSnaPULlc2FrStatFRMRsOut | read-only | current | |
| 1.3.6.1.4.1.164.8.11.13.1.19 | ColumnpktSwchSnaPULlc2FrStatDISCsIn | read-only | current | |
| 1.3.6.1.4.1.164.8.11.13.1.20 | ColumnpktSwchSnaPULlc2FrStatDISCsOut | read-only | current | |
| 1.3.6.1.4.1.164.8.11.13.1.21 | ColumnpktSwchSnaPULlc2FrStatUAsIn | read-only | current | |
| 1.3.6.1.4.1.164.8.11.13.1.22 | ColumnpktSwchSnaPULlc2FrStatUAsOut | read-only | current | |
| 1.3.6.1.4.1.164.8.11.13.1.23 | ColumnpktSwchSnaPULlc2FrStatDMsIn | read-only | current | |
| 1.3.6.1.4.1.164.8.11.13.1.24 | ColumnpktSwchSnaPULlc2FrStatDMsOut | read-only | current | |
| 1.3.6.1.4.1.164.8.11.13.1.25 | ColumnpktSwchSnaPULlc2FrStatSABMEsIn | read-only | current | |
| 1.3.6.1.4.1.164.8.11.13.1.26 | ColumnpktSwchSnaPULlc2FrStatSABMEsOut | read-only | current | |
| 1.3.6.1.4.1.164.8.11.13.1.27 | ColumnpktSwchSnaPULlc2FrStatRetransmitsIn | read-only | current | |
| 1.3.6.1.4.1.164.8.11.13.1.28 | ColumnpktSwchSnaPULlc2FrStatRetransmitsOut | read-only | current | |
| 1.3.6.1.4.1.164.8.11.13.1.29 | ColumnpktSwchSnaPULlc2FrStatUpperState | read-only | current | The internal DLPI state of the connection. |
| 1.3.6.1.4.1.164.8.11.13.1.30 | ColumnpktSwchSnaPULlc2FrStatLowerState | read-only | current | The internal Llc2Fr state of the connection. |
| 1.3.6.1.4.1.164.8.11.13.1.31 | ColumnpktSwchSnaPULlc2FrStatNRMStatus | read-only | current | This variable indicates if the link is in Normal Response Mode or not. |
| 1.3.6.1.4.1.164.8.11.13.1.32 | ColumnpktSwchSnaPULlc2FrStatFlowCtlStatus | read-only | current | This variable indicates the flow control status of the PU interface. |
| 1.3.6.1.4.1.164.8.11.14 | NodepktSwchSnaGlobal | |||
| 1.3.6.1.4.1.164.8.11.14.1 | ScalarpktSwchSnaGlobalSrcMacAddrS | read-write | current | LLC2 source MAC address used for all LLC2\RFC1490 protocol interfaces, Scratch variable. Format: XX XX XX XX XX XX |
| 1.3.6.1.4.1.164.8.11.14.2 | ScalarpktSwchSnaGlobalSrcMacAddrA | read-only | current | LLC2 source MAC address used for all LLC2\RFC1490 protocol interfaces, Active variable. Format: XX XX XX XX XX XX |
| 1.3.6.1.4.1.164.8.11.14.3 | ScalarpktSwchSnaGlobalDefFrLlc2LinkS | read-write | current | The FR Link to where a mac frame will be routed when the destination MAC address of the frame does not match the SPS source mac address. |
| 1.3.6.1.4.1.164.8.11.14.4 | ScalarpktSwchSnaGlobalDefFrLlc2LinkA | read-only | current | The FR Link to where a mac frame will be routed when the destination MAC address of the frame does not match the SPS source mac address. |
| 1.3.6.1.4.1.164.8.11.14.5 | ScalarpktSwchSnaGlobalDefFrLlc2DlciS | read-write | current | The FR DLCI to where a mac frame will be routed when the destination MAC address of the frame does not match the SPS source mac address. DLCI range is 16..991. |
| 1.3.6.1.4.1.164.8.11.14.6 | ScalarpktSwchSnaGlobalDefFrLlc2DlciA | read-only | current | The FR DLCI to where a mac frame will be routed when the destination MAC address of the frame does not match the SPS source mac address. DLCI range is 16..991. |
| 1.3.6.1.4.1.164.8.11.14.7 | ScalarpktSwchSnaGlobalMaxPus | read-only | current | The maximum number of PUs that can be defined on this device. |
| 1.3.6.1.4.1.164.8.11.14.8 | ScalarpktSwchSnaGlobalStatus | read-write | current | The status of this SNA Global entry. Used for saving the mac address, llc2 port, and dlci. |
| 1.3.6.1.4.1.164.8.12 | NodepktSwchEthernet | |||
| 1.3.6.1.4.1.164.8.12.1 | TablepktSwchEthernetLinkTable | not-accessible | current | The Ethernet link table defines the parameters in the PS Ethernet links. |
| 1.3.6.1.4.1.164.8.12.1.1 | RowpktSwchEthernetLinkEntry | not-accessible | current | The Ethernet Link Entry defines the contents of each link in the Ethernet Link Table. |
| 1.3.6.1.4.1.164.8.12.1.1.1 | ColumnpktSwchEthernetLinkOperationMode | read-write | current | This parameter shows the frame handling mode on this link. When IP mode is defined, the IP frames received on this link are handled and routed by the IP module… |
| 1.3.6.1.4.1.164.8.12.1.1.2 | ColumnpktSwchEthernetLinkUserDefMacAddr | read-write | current | This parameter allows the user to define a different MAC address for this link other than the device MAC address. Possible values: 6 sets of 2 Hexadecimal digi… |
| 1.3.6.1.4.1.164.8.12.1.1.3 | ColumnpktSwchEthernetLinkPointToPointDest | read-write | current | Destination of the frames which are received on this link. Possible values: X.25 PVC: Port:LCN X.25 SVC: X.25 Addr or 'cid' followed by a predefined Call ID nu… |
| 1.3.6.1.4.1.164.8.12.1.1.4 | ColumnpktSwchEthernetLinkTotalFramesIn | read-only | current | Total number of frames which were received on this link. |
| 1.3.6.1.4.1.164.8.12.1.1.5 | ColumnpktSwchEthernetLinkTotalFramesOut | read-only | current | Total number of frames which were transmitted from this link. |
| 1.3.6.1.4.1.164.8.12.1.1.6 | ColumnpktSwchEthernetLinkIpFramesIn | read-only | current | Number of IP frames which were received on this link. |
| 1.3.6.1.4.1.164.8.12.1.1.7 | ColumnpktSwchEthernetLinkIpFramesOut | read-only | current | Number of IP frames which were transmitted from this link. |
| 1.3.6.1.4.1.164.8.12.1.1.8 | ColumnpktSwchEthernetLinkLlc2FramesIn | read-only | current | Number of LLC2 frames which were received on this link. |
| 1.3.6.1.4.1.164.8.12.1.1.9 | ColumnpktSwchEthernetLinkLlc2FramesOut | read-only | current | Number of LLC2 frames which were transmitted from this link. |
| 1.3.6.1.4.1.164.8.12.1.1.10 | ColumnpktSwchEthernetLinkBridgFramesIn | read-only | current | Number of Bridged frames which were received on this link. |
| 1.3.6.1.4.1.164.8.12.1.1.11 | ColumnpktSwchEthernetLinkBridgFramesOut | read-only | current | Number of Bridged frames which were transmitted from this link. |
| 1.3.6.1.4.1.164.8.12.1.1.12 | ColumnpktSwchEthernetLinkDiscardedByFilter | read-only | current | Number of Bridged frames which were received on this link. |
| 1.3.6.1.4.1.164.8.12.2 | TablepktSwchEthernetFilterTable | not-accessible | current | The Ethernet filter table defines the frame filtering and routing through the PS Ethernet links. |
| 1.3.6.1.4.1.164.8.12.2.1 | RowpktSwchEthernetFilterEntry | not-accessible | current | The Ethernet Filter Entry defines the filtering on each Ethernet link. The filter entry is operational only if Bridging Handling is enabled and there is no poi… |
| 1.3.6.1.4.1.164.8.12.2.1.1 | ColumnpktSwchEthernetFilterId | read-only | current | Identification Number of an entry in the filter table. The ID together with the ifindex define an entry. |
| 1.3.6.1.4.1.164.8.12.2.1.2 | ColumnpktSwchEthernetFilterMacAddr | read-write | current | This parameter defines the MAC address in the current entry of the filter table. The MAC address in the filter table is compared with the MAC address in the re… |
| 1.3.6.1.4.1.164.8.12.2.1.3 | ColumnpktSwchEthernetFilterProtType | read-write | current | The protocol type which is compared with the protocol type in the received frame. Each protocol in the IP frame is assigned 16 bits (see RFC1700.txt on the ass… |
| 1.3.6.1.4.1.164.8.12.2.1.4 | ColumnpktSwchEthernetFilterDest | read-write | current | Destination of the frames which match this current entry. The match is in the MAC address and protocol. Possible values: X.25 PVC: Port:LCN X.25 SVC: X.25 Addr… |
| 1.3.6.1.4.1.164.8.12.2.1.5 | ColumnpktSwchEthernetFilterStatus | read-write | current | The status of this filter table entry. valid - This entry was saved. createRequest - Request to create a new entry. underCreation - For a new/updated entry. in… |
| 1.3.6.1.4.1.164.8.12.3 | NodepktSwchEthernetBridging | |||
| 1.3.6.1.4.1.164.8.12.3.1 | ScalarpktSwchEthernetBridgingWanToWan | read-write | current | Enable/Disable Ethernet Bridging, WAN to WAN. |
| 1.3.6.1.4.1.164.8.12.3.2 | ScalarpktSwchEthernetBridgingTimer | read-write | current | Timer used for WAN to WAN communication in order to prevent broadcast frames looping forever between devices. When the timer expires, the frames are discarded.… |
| 1.3.6.1.4.1.164.8.12.3.3 | ScalarpktSwchEthernetBridgingStatus | read-write | current | The status of the Ethernet Bridging Parameters. valid - This table was saved. underCreation - The table was updated and not yet saved. |
| 1.3.6.1.4.1.164.8.12.4 | TablepktSwchEthernetBroadcastDestTable | not-accessible | current | The Ethernet Broadcast Destination table defines all the Bridging destinations of the PS. Each Broadcasted frame will be broadcasted to all these destinations. |
| 1.3.6.1.4.1.164.8.12.4.1 | RowpktSwchEthernetBroadcastDestEntry | not-accessible | current | The Ethernet Broadcast Entry defines destinations for Ethernet bridge data. |
| 1.3.6.1.4.1.164.8.12.4.1.1 | ColumnpktSwchEthernetBroadcastDestProtocol | read-only | current | The protocol of the Broadcasted frames. |
| 1.3.6.1.4.1.164.8.12.4.1.2 | ColumnpktSwchEthernetBroadcastDestId | read-only | current | Identification Number of an entry in the Ethernet Broadcast Destination table. |
| 1.3.6.1.4.1.164.8.12.4.1.3 | ColumnpktSwchEthernetBroadcastDestDestination | read-write | current | Destination for the Ethernet frames. Possible values for X25: X.25 PVC: Port:LCN X.25 SVC: X.25 Addr or 'cid' followed by a predefined Call ID number Possible … |
| 1.3.6.1.4.1.164.8.12.4.1.4 | ColumnpktSwchEthernetBroadcastDestStatus | read-write | current | The status of this Ethernet Destination table entry. valid - This entry was saved. createRequest - Request to create a new entry. underCreation - For a new/upd… |
| 1.3.6.1.4.1.164.8.13 | NodepktSwchIp | |||
| 1.3.6.1.4.1.164.8.13.1 | NodepktSwchIpGlobal | |||
| 1.3.6.1.4.1.164.8.13.1.1 | ScalarpktSwchIpGlobalMaxHopCount | read-write | current | Maximum no. of hops the device will support. The default value is 15. Legal values: 5 to 65000. |
| 1.3.6.1.4.1.164.8.13.1.2 | ScalarpktSwchIpIntervalBetweenUpdates | read-write | current | The time in seconds from one update of the device's dynamic routing table to the next update. The time is in steps of 10 seconds. Default value: 30 Legal value… |
| 1.3.6.1.4.1.164.8.13.1.3 | ScalarpktSwchIpGlobalStatus | read-write | current | The status of this IP Global entry. Used for saving the IP Global parameters. |
| 1.3.6.1.4.1.164.8.13.2 | TablepktSwchIpInterfaceTable | not-accessible | current | The Ip interface table defines the Ip interfaces and their parameters in the PS device. |
| 1.3.6.1.4.1.164.8.13.2.1 | RowpktSwchIpInterfaceEntry | not-accessible | current | The IP interface Entry defines the IP configuration parameters for each IP interface. |
| 1.3.6.1.4.1.164.8.13.2.1.1 | ColumnpktSwchIpInterfaceId | read-only | current | Identification Number of an entry in the IP interface table. |
| 1.3.6.1.4.1.164.8.13.2.1.2 | ColumnpktSwchIpInterfaceAddress | read-write | current | The IP address of the interface. Legal input: any legal IP address. Default value: 0.0.0.0 |
| 1.3.6.1.4.1.164.8.13.2.1.3 | ColumnpktSwchIpInterfaceAddressMask | read-write | current | The IP mask of the interface. Legal input: any legal IP mask: A string of the format X.X.X.X where every X is a number in the range 0-255. Default value: 255.2… |
| 1.3.6.1.4.1.164.8.13.2.1.4 | ColumnpktSwchIpInterfaceSendDefRoutMsgOnly | read-write | current | Some of the RIP messages are default router messages. These messages inform who the default router is. This MIB object allows the user to configure the device … |
| 1.3.6.1.4.1.164.8.13.2.1.5 | ColumnpktSwchIpInterfaceDest | read-write | current | Destination of the packets received on this interface. Possible values: X.25 PVC: Port:LCN X.25 SVC: X.25 Addr or 'cid' followed by a predefined Call ID number… |
| 1.3.6.1.4.1.164.8.13.2.1.6 | ColumnpktSwchIpInterfaceInactivity | read-write | current | Inactivity time in minutes before disconnecting the X25 SVC call. Range: 0..255. Default: 2. |
| 1.3.6.1.4.1.164.8.13.2.1.7 | ColumnpktSwchIpInterfaceLinkCost | read-write | current | This value will be added to the value written in the metric field of the received frame. Range: 1..pktSwchIpGlobalMaxHopCount Default: 1. |
| 1.3.6.1.4.1.164.8.13.2.1.8 | ColumnpktSwchIpInterfaceOptions | read-write | current | When netIpAddress is selected the interface IP address will not be the IP address of the interface. It will be the IP address of the NetWork which is connected… |
| 1.3.6.1.4.1.164.8.13.2.1.9 | ColumnpktSwchIpInterfaceStatus | read-write | current | The status of this filter table entry. valid - This entry was saved. createRequest - Request to create a new entry. underCreation - For a new/updated entry. in… |
| 1.3.6.1.4.1.164.8.13.2.1.10 | ColumnpktSwchIpInterfaceRxFrames | read-only | current | No. of frames which were received on this IP interface. |
| 1.3.6.1.4.1.164.8.13.2.1.11 | ColumnpktSwchIpInterfaceRxExpiredTtl | read-only | current | No. of frames which were received on this IP interface with an Expired Time to Live value. |
| 1.3.6.1.4.1.164.8.13.2.1.12 | ColumnpktSwchIpInterfaceRxUnknownDest | read-only | current | No. of frames which were received on this IP interface with an unknown IP destination. No default router is configured. These frames will be discarded. |
| 1.3.6.1.4.1.164.8.13.2.1.13 | ColumnpktSwchIpInterfaceTxFrames | read-only | current | No. of frames which were Transmitted from this IP interface. |
| 1.3.6.1.4.1.164.8.13.2.1.14 | ColumnpktSwchIpInterfaceTxQueueBufs | read-only | current | No. of buffers which are waiting in the Trasnsmit Queue. |
| 1.3.6.1.4.1.164.8.13.2.1.15 | ColumnpktSwchIpInterfaceTxDiscarded | read-only | current | No. of frames which were ready to be transmitted but were Discarded. The PS will discard frames if the transmit queue is too long. |
| 1.3.6.1.4.1.164.8.13.2.1.16 | ColumnpktSwchIpInterfaceRipRxFrames | read-only | current | No. of RIP frames which were received on this IP interface. |
| 1.3.6.1.4.1.164.8.13.2.1.17 | ColumnpktSwchIpInterfaceRipTxFrames | read-only | current | No. of RIP Frames which were transmitted from this IP interface. |
| 1.3.6.1.4.1.164.8.13.2.1.18 | ColumnpktSwchIpInterfaceRipWaitingMsgs | read-only | current | No. of RIP messages which are waiting to be transmitted to the Network. |
| 1.3.6.1.4.1.164.8.14 | NodepktSwchIsdn | |||
| 1.3.6.1.4.1.164.8.14.1 | NodepktSwchIsdnGlobal | |||
| 1.3.6.1.4.1.164.8.14.1.1 | ScalarpktSwchIsdnGlobalCallRetries | read-write | current | Number of times the call request is repeated after failure. Possible values: 0 - Disable retry mechanism 1-255 - Number of retries default value: 0 |
| 1.3.6.1.4.1.164.8.14.1.2 | ScalarpktSwchIsdnGlobalCallRetryDelay | read-write | current | Time interval between retries (in seconds). Possible values: 5 - 250 Default value: 15 |
| 1.3.6.1.4.1.164.8.14.1.3 | ScalarpktSwchIsdnGlobalCallinactivity | read-write | current | Time of inactivity in seconds, after which the call will be disconnected. An x.25 link is considered inactive when there are no open calls on the link. A frame… |
| 1.3.6.1.4.1.164.8.14.1.4 | ScalarpktSwchIsdnGlobalStatus | read-write | current | The status of the Isdn Global parameters. Used for saving the Isdn global parameters. |
| 1.3.6.1.4.1.164.8.14.2 | TablepktSwchIsdnRoutTable | not-accessible | current | The Isdn Routing Table entries in the Packet Switch. |
| 1.3.6.1.4.1.164.8.14.2.1 | RowpktSwchIsdnRoutEntry | not-accessible | current | Isdn Routing Entry defines the contents of each entry in the table. The outgoing addresses are in a different table - pktSwchIsdnRoutAddrTable. The row status … |
| 1.3.6.1.4.1.164.8.14.2.1.1 | ColumnpktSwchIsdnRoutId | read-only | current | Number of this routing entry. |
| 1.3.6.1.4.1.164.8.14.2.1.2 | ColumnpktSwchIsdnRoutDataBandWidth | read-write | current | Isdn Bandwidth which will be used for the data routed via this entry. The ISDN interface will be configured with the speed which is selected. Possible values: … |
| 1.3.6.1.4.1.164.8.14.2.1.3 | ColumnpktSwchIsdnRoutOptions | read-write | current | Special Options for this routing entry. Possible values: 1 - No special options. 2 - Return to main link. This option is used when the current link is defined … |
| 1.3.6.1.4.1.164.8.14.2.1.4 | ColumnpktSwchIsdnRoutStatus | read-write | current | The status of this routing table entry + address table (pktSwchIsdnOutAddrTable). For creating a new entry select createRequest. A new route entry will be crea… |
| 1.3.6.1.4.1.164.8.14.3 | TablepktSwchIsdnOutAddrTable | not-accessible | current | Outgoing ISDN addresses used by the ISDN routing table. The address table contains outgoing addresses and alternative addresses in case the connection to the f… |
| 1.3.6.1.4.1.164.8.14.3.1 | RowpktSwchIsdnOutAddrEntry | not-accessible | current | Isdn Outgoing Address Entry defines the contents of each entry in the outgoing address table. Each entry has 2 indices: 1. RoutId is the ID in the routing tabl… |
| 1.3.6.1.4.1.164.8.14.3.1.1 | ColumnpktSwchIsdnOutAddrRoutId | read-only | current | ID in the ISDN routing table. |
| 1.3.6.1.4.1.164.8.14.3.1.2 | ColumnpktSwchIsdnOutAddrId | read-only | current | Number of the address + subaddress pair for each routing ID. |
| 1.3.6.1.4.1.164.8.14.3.1.3 | ColumnpktSwchIsdnOutAddr | read-write | current | Destination ISDN Outgoing (Remote) address. The data will be routed out to this address. Possible values: Up to 17 decimal digits. Default value: string of len… |
| 1.3.6.1.4.1.164.8.14.3.1.4 | ColumnpktSwchIsdnOutSubAddr | read-write | current | Destination ISDN Outgoing (Remote) sub address. The data will be routed out to the out addrress with this sub address. Possible values: Up to 6 decimal digits.… |
| 1.3.6.1.4.1.164.8.14.4 | TablepktSwchIsdnAcceptTable | not-accessible | current | Table of Isdn addresses which will be accepted by the agent. If there is a dial back (answer) address, the incoming call will be disconnected and dial back wil… |
| 1.3.6.1.4.1.164.8.14.4.1 | RowpktSwchIsdnAcceptEntry | not-accessible | current | Isdn Accept Entry defines the contents of each entry in the table. |
| 1.3.6.1.4.1.164.8.14.4.1.1 | ColumnpktSwchIsdnAcceptId | read-only | current | Identifier of Accept table entry. |
| 1.3.6.1.4.1.164.8.14.4.1.2 | ColumnpktSwchIsdnAcceptSecondaryLink | read-write | current | A valid Isdn link number on which the call will be accepted when the Primary link (RFC2128.dialCtlPeerCfgLowerIf)is unavailable. Possible values: 255 - No Seco… |
| 1.3.6.1.4.1.164.8.14.4.1.3 | ColumnpktSwchIsdnAcceptDialbkSubAddress | read-write | current | Isdn sub address which will be used by the agent for dialing back. Possible values: Up to 6 decimal digits. Default value: string of length 0. |
| 1.3.6.1.4.1.164.8.14.4.1.4 | ColumnpktSwchIsdnAcceptStatus | read-write | current | The status of this accept table entry. For creating a new entry select createRequest, For deleting an entry select invalid. For saving an entry select valid. |
| 1.3.6.1.4.1.164.8.14.5 | TablepktSwchIsdnLinkTable | not-accessible | current | Table of Isdn Link parameters. Most of the link parameters are in in RFC2127. Isdn Call statistics are RFC2128. The parameters which are not in the the standar… |
| 1.3.6.1.4.1.164.8.14.5.1 | RowpktSwchIsdnLinkEntry | not-accessible | current | Isdn Link Entry defines the contents of each entry in the table. |
| 1.3.6.1.4.1.164.8.14.5.1.1 | ColumnpktSwchIsdnLinkBchannel | read-write | current | Defines which B channels are used for Leased Lines Only. Default value: noBchannel(1). |
| 1.3.6.1.4.1.164.8.14.5.1.2 | ColumnpktSwchIsdnCallsClrs | read-only | current | Number of calls on this link which were cleared since the link was activated. |
| 1.3.6.1.4.1.164.8.14.5.1.3 | ColumnpktSwchIsdnTestCmd | read-write | current | Activate/Stop an ISDN test on the current ISDN link. In order to Activate the test, set the TestCmd to 3 (activate). For stopping the test, set the TestCmd to … |
| 1.3.6.1.4.1.164.8.14.5.1.4 | ColumnpktSwchIsdnTestAddr | read-write | current | Destination ISDN Outgoing (Remote) address which will be called in order to test the ISDN. Possible values: Up to 17 decimal digits. Default value: string of l… |
| 1.3.6.1.4.1.164.8.14.5.1.5 | ColumnpktSwchIsdnTestSubAddr | read-write | current | Destination ISDN Outgoing (Remote) address which will be called in order to test the ISDN. Possible values: Up to 6 decimal digits. Default value: string of le… |
| 1.3.6.1.4.1.164.8.15 | NodepktSwchPpp | |||
| 1.3.6.1.4.1.164.8.15.1 | TablepktSwchPppSecretsTable | not-accessible | current | Table of PPP Secret parameters. The parameters are defined in rfc1472 except for the ROW status which is defined here. In the standard, there is no create requ… |
| 1.3.6.1.4.1.164.8.15.1.1 | RowpktSwchPppSecretsEntry | not-accessible | current | PPP Secrets Entry defines the contents of each entry in the table. |
| 1.3.6.1.4.1.164.8.15.1.1.1 | ColumnpktSwchPppSecretsPairId | read-only | current | Index of the Secrets Pair. |
| 1.3.6.1.4.1.164.8.15.1.1.2 | ColumnpktSwchPppSecretsStatus | read-write | current | The status of the PPP Secrets table. For creating a new entry select createRequest, For deleting an entry select invalid. For saving an entry select valid. |
| 1.3.6.1.4.1.164.8.15.2 | TablepktSwchPppChanTable | not-accessible | current | Table of PPP Channel parameters. The table can be used for Async as well as Sync parameters. In case a parameter is irrelevant for Async or Sync a <not applica… |
| 1.3.6.1.4.1.164.8.15.2.1 | RowpktSwchPppChanEntry | not-accessible | current | PPP Channel Entry defines the contents of each entry in the table. |
| 1.3.6.1.4.1.164.8.15.2.1.1 | ColumnpktSwchPppChanSpeed | read-write | current | The port's speed in bits per second. For Async channels: Default value: 14 . For Sync Links: Use not_applicable(255) The Sync Links have an internal clock with… |
| 1.3.6.1.4.1.164.8.15.2.1.2 | ColumnpktSwchPppChanFlowCtlDuration | read-write | current | Hardware Flow Control Duration. 1..254 - Duration (in 50ms intervals). when timer expires, flow control stops. 0 - No Hardware flow control. 255 - Continuous F… |
| 1.3.6.1.4.1.164.8.15.2.1.3 | ColumnpktSwchPppChanStopBits | read-write | current | This entry indicates the number of stop bits per character. The options are either (1) one stop bit, (2) two stop bits, or (3) 1.5 stop bits. For Sync Links: n… |
| 1.3.6.1.4.1.164.8.15.2.1.4 | ColumnpktSwchPppChanBitPerChar | read-write | current | The number of data bits per character supported by the ppp link. Legal values for Async channels: 5..8 . For Sync Links: 0 |
| 1.3.6.1.4.1.164.8.15.2.1.5 | ColumnpktSwchPppChanParity | read-write | current | This entry selects the type of parity to be checked or generated. The options are (1) space parity, (2) mark parity, (3) even parity, (4) odd parity, or (255) … |
| 1.3.6.1.4.1.164.8.15.2.1.6 | ColumnpktSwchPppChanNegotiationTrigger | read-write | current | The trigger which is used in order to start the Negotiation. The HW signals which are used are: DCD (Data Carrier Detect) - issued by DCE DSR (Data Set Ready) … |
| 1.3.6.1.4.1.164.8.15.2.1.7 | ColumnpktSwchPppChanMRU | read-write | current | Maximum Receive Unit. Size of the packet which is negotiated with the connected device. Default value: 1500 . |
| 1.3.6.1.4.1.164.8.15.2.1.8 | ColumnpktSwchPppChanACCM | read-write | current | Async Control Character Map - The ACCM value serves as a mask for the first 32 characters in the ASCII table. Control characters may cause problems when they a… |
| 1.3.6.1.4.1.164.8.15.2.1.9 | ColumnpktSwchPppChanAuthentication | read-write | current | Port Authentication Type. 1 - No Authentication: User side Only. 2 - Configuration of the Host side. PAP (Password Authentication Protocol) or CHAP (Challenge … |
| 1.3.6.1.4.1.164.8.15.2.1.10 | ColumnpktSwchPppChanInternalClock | read-write | current | The internal clock rate of the MLPPP Link. Default value: 9. For Async channels: return 255. |
| 1.3.6.1.4.1.164.8.15.2.1.11 | ColumnpktSwchPppChanBundle | read-write | current | Bundle Number. It is possible to attach a few channels/links to a bundle. If the User enters a non existing bundle number, the PS will create a new bundle with… |
| 1.3.6.1.4.1.164.8.15.2.1.12 | ColumnpktSwchpPppChanIsdnRoutId | read-write | current | ISDN destination. ID (1..200) in the ISDN routing table containing the outgoing ISDN address for this channel/link. For no destination: 0 Default value: 0 |
| 1.3.6.1.4.1.164.8.15.2.1.13 | ColumnpktSwchpPppChanLastEvent | read-only | current | Status showing the last PPP event which occured on the line described in an ascii string. Examples: 1. Received Configuration Request. 2. Sent Protocol Reject.… |
| 1.3.6.1.4.1.164.8.15.2.1.14 | ColumnpktSwchpPppChanModemInitString | read-write | current | This string is needed by the modem in order to be initiated, before dialing. |
| 1.3.6.1.4.1.164.8.15.2.1.15 | ColumnpktSwchpPppChanModemDialString | read-write | current | This string enables the modem to open a new call. |
| 1.3.6.1.4.1.164.9 | NoderadEthRptr | |||
| 1.3.6.1.4.1.164.9.0 | IdentityradEthRptrEvents | current | The events for Ethernet Repeater. | |
| 1.3.6.1.4.1.164.9.0.1 | NotificationetRptrHealth | current | The etRptrHealth trap conveys information related to the operational status of the repeater. This trap is sent either when the value of etRptrOperStatus change… | |
| 1.3.6.1.4.1.164.9.0.2 | NotificationetRptrResetEvent | current | The etRptrResetEvent trap conveys information related to the operational status of the repeater. This trap is sent on completion of a repeater reset action. A … | |
| 1.3.6.1.4.1.164.9.0.3 | NotificationetRptrConfig | current | This trap is sent upon every change of the etRptrMdlVector object. | |
| 1.3.6.1.4.1.164.9.1 | TableetRptrTable | not-accessible | current | This table contains repeater data specific to the etRptrIndex. |
| 1.3.6.1.4.1.164.9.1.1 | RowetRptrEntry | not-accessible | current | An entry in table etRptrTable. |
| 1.3.6.1.4.1.164.9.1.1.1 | ColumnetRptrIndex | read-only | current | The Repeater Id, this table data refer to. |
| 1.3.6.1.4.1.164.9.1.1.2 | ColumnetRptrGroupCapacity | read-only | current | The etRptrGroupCapacity is the number of groups that can be contained within the repeater. Within each managed repeater, the groups are uniquely numbered in th… |
| 1.3.6.1.4.1.164.9.1.1.3 | ColumnetRptrOperStatus | read-only | current | The etRptrOperStatus object indicates the operational state of the repeater. The etRptrHealthText object may be consulted for more specific information about t… |
| 1.3.6.1.4.1.164.9.1.1.4 | ColumnetRptrHealthText | read-only | current | The health text object is a text string that provides information relevant to the operational state of the repeater. Agents may use this string to provide deta… |
| 1.3.6.1.4.1.164.9.1.1.5 | ColumnetRptrReset | read-write | current | Setting this object to reset(2) causes a transition to the START state of Fig 9-2 in section 9 [IEEE 802.3 Std]. Setting this object to noReset(1) has no effec… |
| 1.3.6.1.4.1.164.9.1.1.6 | ColumnetRptrNonDisruptTest | read-write | current | Setting this object to selfTest(2) causes the repeater to perform a agent-specific, non- disruptive self-test that has the following characteristics: a) The na… |
| 1.3.6.1.4.1.164.9.1.1.7 | ColumnetRptrTotalPartitionedPorts | read-only | current | This object returns the total number of ports in the repeater whose current state meets all three of the following criteria: etRptrPortOperStatus does not have… |
| 1.3.6.1.4.1.164.9.1.1.8 | ColumnetRptrMdlVector | read-write | current | This object returns a vector mapping the location of the repeater modules to their corresponding bit position. A bit that is set indicates an existing module |
| 1.3.6.1.4.1.164.9.1.1.9 | ColumnetRptrMonitorTransmitCollisions | read-only | current | This counter is incremented every time the repeater state machine enters the TRANSMIT COLLISION state from any state other than ONE PORT LEFT (Ref: Fig 9-2, IE… |
| 1.3.6.1.4.1.164.9.2 | TableetRptrSecTable | not-accessible | current | Repeater Security Table |
| 1.3.6.1.4.1.164.9.2.1 | RowetRptrSecEntry | not-accessible | current | An entry in table etRptrSecTable. |
| 1.3.6.1.4.1.164.9.2.1.1 | ColumnetRptrId | read-only | current | The Repeater Id, this table data refer to. |
| 1.3.6.1.4.1.164.9.2.1.2 | ColumnetRptrSecID | read-only | current | Segment's security unique identification number |
| 1.3.6.1.4.1.164.9.2.1.3 | ColumnetRptrSecEnable | read-write | current | This entry indicates whether the specific segment's security is active or not |
| 1.3.6.1.4.1.164.9.2.1.4 | ColumnetRptrSecPattern | read-write | current | A six-octet(48 bit) pattern: where the masked bits of etRptrSecMask need to match the MAC address of each port within the segment.Value of all zeros indicates … |
| 1.3.6.1.4.1.164.9.2.1.5 | ColumnetRptrSecMask | read-write | current | Mask of the allowed MAC address that can be connected through the ports within the segment |
| 1.3.6.1.4.1.164.10 | NoderadMpls | |||
| 1.3.6.1.4.1.164.10.0 | NoderadMplsNotifications | |||
| 1.3.6.1.4.1.164.10.1 | NoderadMplsCfgObjects | |||
| 1.3.6.1.4.1.164.10.1.1 | ScalarmplsMinStaticIngressLabel | read-write | current | This is the minimum value of a static MPLS ingress label that is supported by the device. |
| 1.3.6.1.4.1.164.10.1.2 | ScalarmplsMaxStaticIngressLabel | read-write | current | This is the maximum value of static MPLS ingress label that is supported by the device |
| 1.3.6.1.4.1.164.10.1.3 | ScalarmplsMinIngressDynamicLabel | read-write | current | This is the minimum value of a dynamic MPLS ingress label that is supported by the device. |
| 1.3.6.1.4.1.164.10.1.4 | ScalarmplsMaxIngressDynamicLabel | read-write | current | This is the maximum value of a dynamic MPLS ingress label that is supported by the device |
| 1.3.6.1.4.1.164.10.1.5 | ScalarmplsIngressTunnelIndexNext | read-only | current | This object contains an unused value for mplsIngressTunnelIndex, or a zero to indicate that none exist. Negative values are not allowed, as they do not corresp… |
| 1.3.6.1.4.1.164.10.1.6 | TablemplsIngressTunnelTable | not-accessible | current | The mpls Ingress Tunnel Table |
| 1.3.6.1.4.1.164.10.1.6.1 | RowmplsIngressTunnelEntry | not-accessible | current | An entry in this table represents an MPLS tunnel. An entry can be created by a network administrator or by an SNMP agent as instructed by an MPLS signaling pro… |
| 1.3.6.1.4.1.164.10.1.6.1.1 | ColumnmplsIngressTunnelIndex | not-accessible | current | Ingress Tunnel index. |
| 1.3.6.1.4.1.164.10.1.6.1.2 | ColumnmplsIngressTunnelName | read-create | current | The name assigned to the ingress tunnel. |
| 1.3.6.1.4.1.164.10.1.6.1.3 | ColumnmplsIngressTunnelOwner | read-create | current | Denotes the entity (or protocol) that created and is responsible for managing this tunnel. |
| 1.3.6.1.4.1.164.10.1.6.1.4 | ColumnmplsIngressTunnelAttachedInterface | read-create | current | The incoming interface leads to a predefined ifindex based on connection type. |
| 1.3.6.1.4.1.164.10.1.6.1.5 | ColumnmplsIngressTunnelNumberOfLabels | read-create | current | The number of tunnel labels that should be received on this ingress tunnel. This number does not include the pW label |
| 1.3.6.1.4.1.164.10.1.6.1.6 | ColumnmplsIngressTunnelAdminStatus | read-create | current | Indicates the desired operational status of this tunnel. |
| 1.3.6.1.4.1.164.10.1.6.1.7 | ColumnmplsIngressTunnelOuterLabel | read-create | current | The Label that is 'closer' to the network encapsulation. |
| 1.3.6.1.4.1.164.10.1.6.1.8 | ColumnmplsIngressTunnelInnerLabel | read-create | current | The Label that is 'closer' to the user payload. |
| 1.3.6.1.4.1.164.10.1.6.1.9 | ColumnmplsIngressTunnelRowStatus | read-create | current | Object used for creating, modifying, and deleting a row of this table |
| 1.3.6.1.4.1.164.10.1.6.1.10 | ColumnmplsIngressTunnelPWCounter | read-only | current | The number of Pseudo Wires that use the ingress tunnel. |
| 1.3.6.1.4.1.164.10.1.6.1.11 | ColumnmplsIngressTunnelOperStatus | read-only | current | Indicates the operational status of this ingress tunnel. |
| 1.3.6.1.4.1.164.10.1.7 | ScalarmplsEgressTunnelIndexNext | read-only | current | This object contains an unused value for mplsEgressTunnelIndex, or a zero to indicate that none exist. Negative values are not allowed, as they do not correspo… |
| 1.3.6.1.4.1.164.10.1.8 | TablemplsEgressTunnelTable | not-accessible | current | The mpls Egress Tunnel Table |
| 1.3.6.1.4.1.164.10.1.8.1 | RowmplsEgressTunnelEntry | not-accessible | current | An entry in this table represents an MPLS tunnel. An entry can be created by a network administrator or by an SNMP agent as instructed by an MPLS signalling pr… |
| 1.3.6.1.4.1.164.10.1.8.1.1 | ColumnmplsEgressTunnelIndex | not-accessible | current | Egress Tunnel index . |
| 1.3.6.1.4.1.164.10.1.8.1.2 | ColumnmplsEgressTunnelName | read-create | current | The name assigned to the egress tunnel. |
| 1.3.6.1.4.1.164.10.1.8.1.3 | ColumnmplsEgressTunnelOwner | read-create | current | Denotes the entity (or protocol) that created and is responsible for managing this tunnel. |
| 1.3.6.1.4.1.164.10.1.8.1.4 | ColumnmplsEgressTunnelAttachedInterface | read-create | current | The outgoing interface leads to a predefined ifindex based on connection type. |
| 1.3.6.1.4.1.164.10.1.8.1.5 | ColumnmplsEgressTunnelNextHopType | read-create | current | Indicates address type of the Next Hop. Not applicable for device with router. |
| 1.3.6.1.4.1.164.10.1.8.1.6 | ColumnmplsEgressTunnelNextHop | read-create | current | Not applicable (=0) when mplsEgressTunnelNextHopType=notApplicable. When applicable, represents ATM VC, Bridge Port, according to mplsEgressTunnelNextHopType. |
| 1.3.6.1.4.1.164.10.1.8.1.7 | ColumnmplsEgressTunnelIpNextHop | read-create | current | Applicable only when mplsEgressTunnelNextHopType =ipV4. |
| 1.3.6.1.4.1.164.10.1.8.1.8 | ColumnmplsEgressTunnelNumberOfLabels | read-create | current | Number of Tunnel Labels that should be transmitted on this egress LSP (Labeled-Switched Path). This number of labels does not include the PW number. Valid valu… |
| 1.3.6.1.4.1.164.10.1.8.1.9 | ColumnmplsEgressTunnelAdminStatus | read-create | current | Indicates the desired operational status of this egress tunnel. |
| 1.3.6.1.4.1.164.10.1.8.1.10 | ColumnmplsEgressTunnelOuterLabel | read-create | current | The Label that is 'closer' to the network encapsulation. |
| 1.3.6.1.4.1.164.10.1.8.1.11 | ColumnmplsEgressTunnelInnerLabel | read-create | current | The Label that is 'closer' to the user payload. |
| 1.3.6.1.4.1.164.10.1.8.1.12 | ColumnmplsEgressTunnelRowStatus | read-create | current | Object used for creating, modifying, and deleting a row of this table |
| 1.3.6.1.4.1.164.10.1.8.1.13 | ColumnmplsEgressTunnelPWCounter | read-only | current | The number of Pseudo Wires that use the egress tunnel. |
| 1.3.6.1.4.1.164.10.1.8.1.14 | ColumnmplsEgressTunnelPeerIdx | read-create | current | Represents the Index of the Peer (as it is defined in the Peer Table), for which this egress tunnel should be established. |
| 1.3.6.1.4.1.164.10.1.8.1.15 | ColumnmplsEgressTunnelExpBitsMode | read-create | current | Indicates the EXP Bits Mode of this egress tunnel: copyFromPw(2)- EXP Bits of this tunnel are copied from the EXP bits of the PW, as configured for the PW. sta… |
| 1.3.6.1.4.1.164.10.1.8.1.16 | ColumnmplsEgressTunnelExpBits | read-create | current | Indicates the EXP Bits of this egress tunnel. Relevant only when EXP Bits Mode is 'static(3)'. |
| 1.3.6.1.4.1.164.10.1.8.1.17 | ColumnmplsEgressTunnelOperStatus | read-only | current | Indicates the operational status of this egress tunnel. |
| 1.3.6.1.4.1.164.10.1.9 | ScalarmplsPhpMode | read-write | current | This variable represents the PHP (Penultimate Hop Popping) Mode of the device. |
| 1.3.6.1.4.1.164.10.2 | NoderadMplsLdp | |||
| 1.3.6.1.4.1.164.10.2.1 | NoderadMplsLdpCfgObjects | |||
| 1.3.6.1.4.1.164.10.2.1.1 | TableradMplsLdpEntityTable | not-accessible | current | This table contains information about the MPLS Label Distribution Protocol Entities which exist on this Label Switching Router (LSR) or Label Edge Router (LER). |
| 1.3.6.1.4.1.164.10.2.1.1.1 | RowradMplsLdpEntityEntry | not-accessible | current | An entry in this table represents an LDP entity. An entry can be created by a network administrator or by an SNMP agent as instructed by LDP. |
| 1.3.6.1.4.1.164.10.2.1.1.1.1 | ColumnradMplsLdpEntityLdpId | not-accessible | current | The LDP identifier. When irrelevant, value = (2^48)-1 (all ones in all 6 octets). |
| 1.3.6.1.4.1.164.10.2.1.1.1.2 | ColumnradMplsLdpEntityIndex | not-accessible | current | This index is used as a secondary index to uniquely identify this row. A secondary index (this object) is meaningful to some but not all, LDP implementations. … |
| 1.3.6.1.4.1.164.10.2.1.1.1.4 | ColumnradMplsLdpEntityAdminStatus | read-create | current | The administrative status of this LDP Entity. If this object is changed from 'enable' to 'disable' and this entity has already attempted to establish contact w… |
| 1.3.6.1.4.1.164.10.2.1.1.1.9 | ColumnradMplsLdpEntityKeepAliveHoldTimer | read-create | current | The 16-bit integer value which is the proposed keep alive hold timer for this LDP Entity. |
| 1.3.6.1.4.1.164.10.2.1.1.1.10 | ColumnradMplsLdpEntityHelloHoldTimer | read-create | current | The 16-bit integer value which is the proposed Hello hold timer for this LDP Entity. The Hello Hold time in seconds. An LSR maintains a record of Hellos receiv… |
| 1.3.6.1.4.1.164.10.2.1.1.1.23 | ColumnradMplsLdpEntityRowStatus | read-create | current | The status of this conceptual row. All writable objects in this row may be modified at any time, however, as described in detail in the section entitled, 'Chan… |
| 1.3.6.1.4.1.164.10.2.1.2 | ScalarradMplsLdpLsrId | read-write | current | The Label Switching Router's Identifier. |
| 1.3.6.1.4.1.164.11 | NoderadRouter | |||
| 1.3.6.1.4.1.164.11.1 | NodertrInterfaces | |||
| 1.3.6.1.4.1.164.11.1.1 | TablertrConfigIfTable | not-accessible | current | Table of configured interfaces. |
| 1.3.6.1.4.1.164.11.1.1.1 | RowrtrConfigIfEntry | not-accessible | current | Each entry defines a configured interface. |
| 1.3.6.1.4.1.164.11.1.1.1.1 | ColumnrtrConfigIfIndex | read-only | current | This variable uniquely identifies the interface. It is used as a cross reference in other system tables |
| 1.3.6.1.4.1.164.11.1.1.1.2 | ColumnrtrConfigIfType | read-create | current | This variable identifies the type of the specific entry in the rtrDynamicIfConfigTable. This field is writable only at creation time (i.e., when value of statu… |
| 1.3.6.1.4.1.164.11.1.1.1.3 | ColumnrtrConfigIfName | read-create | current | This variable provides a logical name to a specific entry in rtrConfigIfTable. It is also used in identifying the Driver interfaces. |
| 1.3.6.1.4.1.164.11.1.1.1.4 | ColumnrtrConfigIfStatus | read-create | current | The status of the ConfigEntry. The choices are those defined in SNMPv2-TC. Only: active, createAndWait, and destroy will be used. active - The conceptual row i… |
| 1.3.6.1.4.1.164.11.1.2 | TablertrIfCfgTable | not-accessible | current | Router Interface Configuration Table. |
| 1.3.6.1.4.1.164.11.1.2.1 | RowrtrIfCfgEntry | not-accessible | current | An entry in the Router Interface Configuration Table. |
| 1.3.6.1.4.1.164.11.1.2.1.1 | ColumnrtrIfCfgIndex | read-only | current | This object indicates the Router Interface Index. (In some cases it will be equal to the Router Interface ifIndex). |
| 1.3.6.1.4.1.164.11.1.2.1.2 | ColumnrtrIfCfgIpAddress | read-only | current | IP Address of the Router Interface. |
| 1.3.6.1.4.1.164.11.1.2.1.3 | ColumnrtrIfCfgRowStatus | read-create | current | This object enables the user to create/delete entries of this table. |
| 1.3.6.1.4.1.164.11.1.2.1.4 | ColumnrtrIfCfgIpMask | read-create | current | IP Mask Address Router Interface. |
| 1.3.6.1.4.1.164.11.1.2.1.5 | ColumnrtrIfCfgIfIndex | read-create | current | ifIndex of the device interface connected to this Router Interface. |
| 1.3.6.1.4.1.164.11.1.2.1.6 | ColumnrtrIfCfgType | read-create | current | The Router Interface Type. atm - ATM router interface lis - Logical IP Subnet router interface. ethernet - Ethernet router interface. |
| 1.3.6.1.4.1.164.11.1.2.1.7 | ColumnrtrIfCfgVlanId | read-create | current | The VLAN ID assigned to Tagged frames transmitted from this Router Interface. The value inserted should be a defined VLAN. |
| 1.3.6.1.4.1.164.11.1.2.1.8 | ColumnrtrIfCfgMtu | read-create | current | The size of the largest packet which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagram… |
| 1.3.6.1.4.1.164.11.1.2.1.9 | ColumnrtrIfCfgName | read-create | current | The Router Interface Name. |
| 1.3.6.1.4.1.164.11.1.2.1.10 | ColumnrtrIfCfgConnectionPointer | read-create | current | This parameter represents the entity that is connected to this Router Interface. The value of this parameter is a pointer to an existing row of a table, where … |
| 1.3.6.1.4.1.164.11.1.2.1.11 | ColumnrtrIfCfgVlanTagging | read-create | current | The VLAN Tagging. |
| 1.3.6.1.4.1.164.11.1.2.1.12 | ColumnrtrIfCfgVlanPriority | read-create | current | The VLAN Priority. |
| 1.3.6.1.4.1.164.11.1.2.1.13 | ColumnrtrIfCfgParams | read-create | current | This object represents one or more parameters of the Router Interface. Each group of bits (one or more bits) represents a specific parameter and its possible v… |
| 1.3.6.1.4.1.164.11.1.2.1.14 | ColumnrtrIfCfgMngAccess | read-create | current | This object represents whether Management Access is enabled via this Router Interface. |
| 1.3.6.1.4.1.164.11.1.2.1.15 | ColumnrtrIfCfgLlcSnapEncaps | read-create | current | This object represents the LLC/SNAP Encapsulation. |
| 1.3.6.1.4.1.164.11.1.2.1.16 | ColumnrtrIfCfgDhcp | read-create | current | This object indicates whether DHCP is enabled for this Router Interface. |
| 1.3.6.1.4.1.164.11.2 | NodeipSpec | |||
| 1.3.6.1.4.1.164.11.2.1 | TablertrIpAddrTable | not-accessible | current | This table is parralel to MIB II IpAddrTable, and is used to add/delete entries to/from that table. In addition it contains private objects. |
| 1.3.6.1.4.1.164.11.2.1.1 | RowrtrIpAddrEntry | not-accessible | current | The addressing information for one of this entity's IP addresses. |
| 1.3.6.1.4.1.164.11.2.1.1.1 | ColumnrtrIpAdEntAddr | read-only | current | The IP address to which this entry's addressing information pertains. |
| 1.3.6.1.4.1.164.11.2.1.1.2 | ColumnrtrIpAdEntIfIndex | read-create | current | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.4.1.164.11.2.1.1.3 | ColumnrtrIpAdEntNetMask | read-create | current | The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits … |
| 1.3.6.1.4.1.164.11.2.1.1.4 | ColumnrtrIpAdEntForwardIpBroadcast | read-create | current | This variable controls forwarding of IP (sub)net-directed broadcasts destined for an attached sub(net). |
| 1.3.6.1.4.1.164.11.2.1.1.5 | ColumnrtrIpAdEntBackupAddr | read-create | current | |
| 1.3.6.1.4.1.164.11.2.1.1.6 | ColumnrtrIpAdEntStatus | read-create | current | The Status variable is used to create and destroy a Ip Addresses. |
| 1.3.6.1.4.1.164.11.2.2 | NodeicmpSpec | |||
| 1.3.6.1.4.1.164.11.2.2.1 | ScalarrtrIcmpGenErrMsgEnable | read-write | current | This variable controlls the ability to generate ICMP error messages |
| 1.3.6.1.4.1.164.11.2.2.2 | TablertrIcmpRdTable | not-accessible | current | This table contains ICMP Router Discovery parameters configurated per IP interface. |
| 1.3.6.1.4.1.164.11.2.2.2.1 | RowrtrIcmpRdEntry | not-accessible | current | The ICMP parameters configurated for IP interface. |
| 1.3.6.1.4.1.164.11.2.2.2.1.1 | ColumnrtrIcmpRdIpAddr | read-only | current | The IP address to which this entry's information pertains. |
| 1.3.6.1.4.1.164.11.2.2.2.1.2 | ColumnrtrIcmpRdIpAdvertAddr | read-write | current | The IP destination address to be used for multicast Router Advertisements sent from the interface. The only permissible values are the all-systems multicast ad… |
| 1.3.6.1.4.1.164.11.2.2.2.1.3 | ColumnrtrIcmpRdMaxAdvertInterval | read-write | current | The maximum time allowed between sending multicast Router Advertisements from the interface, in seconds. Must be no less than 4 seconds and no greater than 180… |
| 1.3.6.1.4.1.164.11.2.2.2.1.4 | ColumnrtrIcmpRdMinAdvertInterval | read-write | current | The minimum time allowed between sending unsolicited multicast Router Advertisements from the interface, in seconds. Must be no less than 3 seconds and no grea… |
| 1.3.6.1.4.1.164.11.2.2.2.1.5 | ColumnrtrIcmpRdAdvertLifetime | read-write | current | The maximum length of time that the advertised addresses are to be considered as valid. Must be no less than rtrIcmpRdMaxAdvertInterval and no greater than 900… |
| 1.3.6.1.4.1.164.11.2.2.2.1.6 | ColumnrtrIcmpRdAdvertise | read-write | current | A flag indicating whether or not the address is to be advertised. |
| 1.3.6.1.4.1.164.11.2.2.2.1.7 | ColumnrtrIcmpRdPreferenceLevel | read-write | current | The preferability of the address as a default router address, relative to other router addresses on the same subnet. |
| 1.3.6.1.4.1.164.11.2.2.2.1.8 | ColumnrtrIcmpRdEntStatus | read-write | current | Setting of any value to this object set values of all fields to the default values. |
| 1.3.6.1.4.1.164.11.2.3 | Noderip2Spec | |||
| 1.3.6.1.4.1.164.11.2.3.1 | TablertrRip2IfConfTable | not-accessible | current | This table is an extension of rip2IfConfTable (RFC 1724 ,RIP 2). It means that every time somebody creates/destroys a row in the rip2IfConfTable, the same row … |
| 1.3.6.1.4.1.164.11.2.3.1.1 | RowrtrRip2IfConfEntry | not-accessible | current | An entry in table rtrRip2IfConfTable. |
| 1.3.6.1.4.1.164.11.2.3.1.1.1 | ColumnrtrRip2IfConfAddress | read-only | current | The IP Address of this system on the indicated subnet. For unnumbered interfaces, the value 0.0.0.N, where the least significant 24 bits (N) is the ifIndex for… |
| 1.3.6.1.4.1.164.11.2.3.1.1.2 | ColumnrtrRip2IfConfVirtualDis | read-write | deprecated | This variable defines the virtual number of hops assigned to the interface specified by rtrIfIpAddrIndex. This enables fine-tuning of the RIP routing algorithm. |
| 1.3.6.1.4.1.164.11.2.3.1.1.3 | ColumnrtrRip2IfConfAutoSend | read-write | deprecated | When set to enable only the default route is sent through the interface. When set to disable, regular RIPs are sent. |
| 1.3.6.1.4.1.164.11.2.3.1.1.4 | ColumnrtrRip2IfConfRipEnable | read-write | current | This object shows whether RIP Protocol is enabled on the current interface. |
| 1.3.6.1.4.1.164.11.2.4 | NodearpSpec | |||
| 1.3.6.1.4.1.164.11.2.4.1 | ScalarrtrArpDeleteTable | read-write | current | Setting this object to any not-null value has the effect of deleting all entries of the ARP table. |
| 1.3.6.1.4.1.164.11.2.4.2 | ScalarrtrArpInactiveTimeOut | read-write | current | This variable defines the maximum time period (in second) that can pass between ARP requests concerning an entry in the ARP table. After this time period, the … |
| 1.3.6.1.4.1.164.11.2.4.3 | ScalarrtrArpProxy | read-write | current | When ARP Proxy is enabled, the router can respond to ARP requests for nodes located on a different sub-net, provided they are it its network table. The router … |
| 1.3.6.1.4.1.164.11.2.5 | NodertrNat | |||
| 1.3.6.1.4.1.164.11.2.5.1 | TablertrNatIfConfTable | not-accessible | current | A list of interfaces which require separate NAT configuration. |
| 1.3.6.1.4.1.164.11.2.5.1.1 | RowrtrNatIfConfEntry | not-accessible | current | A single routing domain in a single subnet. |
| 1.3.6.1.4.1.164.11.2.5.1.1.1 | ColumnrtrNatIfVirtualAddress | read-only | current | The IP Address of the virtual subnet to be translated by the 'NAT box' attached to this interface. For some devices/cases, it might represent the Virtual Lowes… |
| 1.3.6.1.4.1.164.11.2.5.1.1.2 | ColumnrtrNatIfVirtualMask | read-only | current | The subnet Mask of the virtual subnet. For some devices/cases, it might represent the Virtual Highest IP Address. |
| 1.3.6.1.4.1.164.11.2.5.1.1.3 | ColumnrtrNatIfConfStatus | read-create | current | Writing 'destroy' has the effect of deleting this interface. |
| 1.3.6.1.4.1.164.11.2.5.1.1.4 | ColumnrtrNatIfRealAddress | read-create | current | The IP Address of the real subnet which is used by 'NAT box' for translation. For some devices/cases, it might represent the Real Lowest IP Address. |
| 1.3.6.1.4.1.164.11.2.5.1.1.5 | ColumnrtrNatIfRealMask | read-create | current | The subnet Mask of the real subnet. For some devices/cases, it might represent the Real Highest IP Address. |
| 1.3.6.1.4.1.164.11.2.5.1.1.6 | ColumnrtrNatIfType | read-create | current | NAT type. static - Translate a specific virtual IP network to a specific real IP network. TCP, UDP and ICMP sessions originated both in real and virtual networ… |
| 1.3.6.1.4.1.164.11.2.5.2 | TablertrPatTable | not-accessible | current | Port Address Translation (PAT - single IP NAT) configuration Table. |
| 1.3.6.1.4.1.164.11.2.5.2.1 | RowrtrPatEntry | not-accessible | current | Each entry describe unique mapping between real IP address, range of ports and protocol, to local (virtual) IP address. Ports are used in the TCP (rfc793) to n… |
| 1.3.6.1.4.1.164.11.2.5.2.1.1 | ColumnrtrPatIdx | read-only | current | Running index for PAT table. |
| 1.3.6.1.4.1.164.11.2.5.2.1.2 | ColumnrtrPatRealAddress | read-create | current | The real IP Address used for translation |
| 1.3.6.1.4.1.164.11.2.5.2.1.3 | ColumnrtrPatVirtualAddress | read-create | current | The virtual IP Address used for translation |
| 1.3.6.1.4.1.164.11.2.5.2.1.4 | ColumnrtrPatLowestPort | read-create | current | Lowest Port number for this PAT entry |
| 1.3.6.1.4.1.164.11.2.5.2.1.5 | ColumnrtrPatHighestPort | read-create | current | Highest Port number for this PAT entry |
| 1.3.6.1.4.1.164.11.2.5.2.1.6 | ColumnrtrPatProtocol | read-create | current | Protocol selected. This Protocol and port range (lowest port - highest port) define the application (FTP, Telnet, SMTP etc.). Protocol enumaration numbers corr… |
| 1.3.6.1.4.1.164.11.2.5.2.1.7 | ColumnrtrPatStatus | read-create | current | This object enables creating and deleting entries of the table. |
| 1.3.6.1.4.1.164.11.5 | NodertrFACS | |||
| 1.3.6.1.4.1.164.11.5.1 | ScalarrtrFACSDefaultAction | read-write | current | Used to define the default action for the device, when no FACS statements applicable to a given frame are defined. |
| 1.3.6.1.4.1.164.11.5.2 | TablertrFACSActTable | not-accessible | current | The table of FACS action. |
| 1.3.6.1.4.1.164.11.5.2.1 | RowrtrFACSActEntry | not-accessible | current | Each rtrFACSActEntry consist of the following parameters |
| 1.3.6.1.4.1.164.11.5.2.1.1 | ColumnrtrFACSActType | read-only | current | This parameter indicates on which FACS Table the FACS action will preform. |
| 1.3.6.1.4.1.164.11.5.2.1.2 | ColumnrtrFACSActIfIndex | read-only | current | The interface to which this FACS entry is applicable. |
| 1.3.6.1.4.1.164.11.5.2.1.3 | ColumnrtrFACSAction | read-write | current | The management station that sends a SET request for one of these actions with indexes rtrFACSType and rtrFACSIfIndex defines the type and the interface Id for … |
| 1.3.6.1.4.1.164.11.5.2.1.4 | ColumnrtrFACSActiveDB | read-write | current | This parameter will point on which Facs DataBase the SNMP agent read. The Active dataBase is Read Only. The user may change FACS statements in the temporary Da… |
| 1.3.6.1.4.1.164.11.5.3 | TablertrFACSTable | not-accessible | current | The table of FACS statment. |
| 1.3.6.1.4.1.164.11.5.3.1 | RowrtrFACSEntry | not-accessible | current | Each FACS statment consists of the following parameters |
| 1.3.6.1.4.1.164.11.5.3.1.1 | ColumnrtrFACSIfIndex | read-only | current | The interface to which this FACS entry is applicable. For applications this variables is always 0. |
| 1.3.6.1.4.1.164.11.5.3.1.2 | ColumnrtrFACSProtocolType | read-only | current | This parameter define the protocol the Security Access Control is applicable. |
| 1.3.6.1.4.1.164.11.5.3.1.3 | ColumnrtrFACSType | read-only | current | The Mode of in which this FACS statement operates. For applications this variable is always rx(2). |
| 1.3.6.1.4.1.164.11.5.3.1.4 | ColumnrtrFACSIndex | read-only | current | Index to the FACS Table. |
| 1.3.6.1.4.1.164.11.5.3.1.5 | ColumnrtrFACSSrcAdd | read-write | current | The size of the octet string will be according to the protocol type defined in rtrFACSProtocolType. |
| 1.3.6.1.4.1.164.11.5.3.1.6 | ColumnrtrFACSSrcAddMask | read-write | current | Source-address mask . |
| 1.3.6.1.4.1.164.11.5.3.1.7 | ColumnrtrFACSDesAdd | read-write | current | Destination-address The size of the octet string will be according to the protocol type define in rtrFACSProtocolType . |
| 1.3.6.1.4.1.164.11.5.3.1.8 | ColumnrtrFACSDesAddMask | read-write | current | Destination-address mask . |
| 1.3.6.1.4.1.164.11.5.3.1.9 | ColumnrtrFACSOperation | read-write | current | ... . |
| 1.3.6.1.4.1.164.11.5.3.1.10 | ColumnrtrFACSNetFiltering | read-write | current | ... . |
| 1.3.6.1.4.1.164.11.5.3.1.11 | ColumnrtrFACSSocketNum | read-write | current | Port/socket number for different applications 0 is default meaning not applicable. none(1), ftp(21), telnet(23), smtp(25), tftp(69), snmp(161), snmpTrap(162), … |
| 1.3.6.1.4.1.164.11.5.3.1.12 | ColumnrtrFACSMask1Id | read-write | current | Index into RND mask table FACS/COD Type) . |
| 1.3.6.1.4.1.164.11.5.3.1.13 | ColumnrtrFACSMask2Id | read-write | current | Index into RND mask table FACS/COD according to the value of rtrFACSType . |
| 1.3.6.1.4.1.164.11.5.3.1.14 | ColumnrtrFACSStatus | read-write | current | The status of a table entry. |
| 1.3.6.1.4.1.164.11.5.4 | ScalarrtrFACSFrameData | read-only | current | Data from the frame that violated a FACS Filter. |
| 1.3.6.1.4.1.164.11.7 | NodertrBridge | |||
| 1.3.6.1.4.1.164.11.7.1 | TablertrBridgePortConfigTable | not-accessible | current | Table of the bridge ports |
| 1.3.6.1.4.1.164.11.7.1.1 | RowrtrBridgePortConfigEntry | not-accessible | current | Each entry defines a bridge port |
| 1.3.6.1.4.1.164.11.7.1.1.1 | ColumnrtrBridgePortCIndex | read-only | current | This is the index of the bridge port. It is the same as 'dot1dBasePort' of the Bridge MIB. |
| 1.3.6.1.4.1.164.11.7.1.1.2 | ColumnrtrBridgePortCIf | read-create | current | The config ifIndex the bridge port is sitting on. |
| 1.3.6.1.4.1.164.11.7.1.1.3 | ColumnrtrBridgePortCStatus | read-create | current | The status of the RtrBridgePortConfigEntry. Creating and destroying the bridge port is done by this variable. |
| 1.3.6.1.4.1.164.11.7.2 | Nodewebranger | |||
| 1.3.6.1.4.1.164.11.7.2.1 | NodewrSysConfig | |||
| 1.3.6.1.4.1.164.11.7.2.1.1 | ScalarwrBraodcastCtrlCmd | read-write | current | This parameter is a command to the webranger CPU. It enables blocking or forwarding broadcast frames, which may cause a trigger to a connection. block (1) - bl… |
| 1.3.6.1.4.1.164.11.7.2.1.2 | ScalarwrFrSelfLearningMode | read-write | current | This parameter enables the webranger to learn the DLCi's configuration and maintanance protocol. off - will get the configuration by setting it. on - disables … |
| 1.3.6.1.4.1.164.11.7.2.1.3 | ScalarwrGratuitousArp | read-write | current | This parameter enables/disables the Gratuitous ARP feature. When enabled, the feature means: when receiving ARP with sender's Source IP Address that already ex… |
| 1.3.6.1.4.1.164.11.7.2.2 | NodewrIpRouterInfo | |||
| 1.3.6.1.4.1.164.11.7.2.2.1 | NodewrConfigIpDhcp | |||
| 1.3.6.1.4.1.164.11.7.2.2.1.1 | ScalarwrDhcpAction | read-write | current | Activating (disable/enable) DHCP server operation. Since DHCP Server and DHCP Relay cannot reside in same device, DHCP Relay may be enabled (per interface), on… |
| 1.3.6.1.4.1.164.11.7.2.2.1.2 | TablewrDhcpTable | not-accessible | current | A list of DHCP entries. The number of entries is up to DHCP current entries, according to the WEBRANger model. |
| 1.3.6.1.4.1.164.11.7.2.2.1.2.1 | RowwrDhcpEntry | not-accessible | current | DHCP parameters per entry of the DHCP table. |
| 1.3.6.1.4.1.164.11.7.2.2.1.2.1.1 | ColumnwrDhcpLowIpAddress | read-only | current | DHCP Low Ip Address. |
| 1.3.6.1.4.1.164.11.7.2.2.1.2.1.2 | ColumnwrDhcpHighIpAddress | read-create | current | DHCP High Ip Address. |
| 1.3.6.1.4.1.164.11.7.2.2.1.2.1.3 | ColumnwrDhcpIpMaskAddress | read-create | current | IP mask Address. |
| 1.3.6.1.4.1.164.11.7.2.2.1.2.1.4 | ColumnwrDhcpDefaultGateway | read-create | current | Default Gateway's IP Address. |
| 1.3.6.1.4.1.164.11.7.2.2.1.2.1.5 | ColumnwrDhcpPrimaryDNS | read-create | current | Primary DNS. |
| 1.3.6.1.4.1.164.11.7.2.2.1.2.1.6 | ColumnwrDhcpSecondaryDNS | read-create | current | Secondary DNS. |
| 1.3.6.1.4.1.164.11.7.2.2.1.2.1.7 | ColumnwrDhcpInterface | read-create | current | The IP addresse allocation is done according to the interface type from which the DHCP request arrives. |
| 1.3.6.1.4.1.164.11.7.2.2.1.2.1.8 | ColumnwrDhcpRowStatus | read-create | current | This attribute allows to create/delete a row in this table. For creating a row, the NMS should set wrDhcpRowStatus.id = active(1). For destroying a row, the NM… |
| 1.3.6.1.4.1.164.11.7.2.2.1.2.1.9 | ColumnwrDhcpIpAddressLeaseTime | read-create | current | Allocated IP Address lease time in seconds. A zero value specifies no time limitation. |
| 1.3.6.1.4.1.164.11.7.2.2.1.2.1.10 | ColumnwrDhcpPoolName | read-create | current | DHCP pool name - string with max length of 10 characters |
| 1.3.6.1.4.1.164.11.7.2.2.1.2.1.11 | ColumnwrDhcpTftpServerIp | read-create | current | DHCP pool - TFTP-server IP Address. |
| 1.3.6.1.4.1.164.11.7.2.2.1.2.1.12 | ColumnwrDhcpConfigFileName | read-create | current | TFTP-name of the configuration File Name for DHCP pool. |
| 1.3.6.1.4.1.164.11.7.2.2.1.3 | TabledhcpPoolAllocTable | not-accessible | current | A list of DHCP Pool Allocation entries. Each entry (row) consist of a single IP Address belonging to DHCP pool whose lowest IP address is dhcpPoolAllocLowIpAdd… |
| 1.3.6.1.4.1.164.11.7.2.2.1.3.1 | RowdhcpPoolAllocEntry | not-accessible | current | DHCP Pool Allocation parameters per entry of the DHCP Pool Allocation table. |
| 1.3.6.1.4.1.164.11.7.2.2.1.3.1.1 | ColumndhcpPoolAllocLowIpAddress | read-only | current | Lowest IP address of this pool, value eqaul to wrDhcpLowIpAddress for the pool. |
| 1.3.6.1.4.1.164.11.7.2.2.1.3.1.2 | ColumndhcpPoolAllocLeasingIpAddress | read-only | current | Single IP Address belonging to dhcp pool whose Lowest Ip Address is dhcpPoolAllocLowIpAddress. This IP address may be offered for leasing or may be leased by H… |
| 1.3.6.1.4.1.164.11.7.2.2.1.3.1.3 | ColumndhcpPoolAllocMacAddress | read-only | current | MAC Address to which the IP address has been leased |
| 1.3.6.1.4.1.164.11.7.2.2.1.3.1.4 | ColumndhcpPoolAllocTimeLeft | read-only | current | IP address leasing time left in seconds |
| 1.3.6.1.4.1.164.11.7.2.2.1.3.1.5 | ColumndhcpPoolAllocFlags | read-only | current | These flags indicates status of each IP address. User may change value to free, via dhcpPoolAllocFreeCmd |
| 1.3.6.1.4.1.164.11.7.2.2.1.3.1.6 | ColumndhcpPoolAllocFreeCmd | read-write | current | Setting this attribute to On (3), will enforce the agent to Free this entry. The Agent will change the value of this MIB object to off(2) automatically, after … |
| 1.3.6.1.4.1.164.11.7.2.2.1.4 | TabledhcpRelayTable | not-accessible | current | A list of DHCP relay entries. |
| 1.3.6.1.4.1.164.11.7.2.2.1.4.1 | RowdhcpRelayEntry | not-accessible | current | DHCP Relay parameters per entry of the DHCP relay table. |
| 1.3.6.1.4.1.164.11.7.2.2.1.4.1.1 | ColumndhcpRelayAction | read-write | current | Setting this attribute to enable (3), will enable DHCP Relay action for this interface (Only if DHCP Server is disabled for device - wrDhcpAction=disable). dhc… |
| 1.3.6.1.4.1.164.11.7.2.2.1.4.1.2 | ColumndhcpRelayServerIpAddress | read-write | current | DHCP Server IP Address. |
| 1.3.6.1.4.1.164.11.7.2.2.1.4.1.3 | ColumndhcpRelayMaxHop | read-write | current | Maximum number of hops till DHCP Server. upper limit is 16 hops |
| 1.3.6.1.4.1.164.11.7.2.2.1.5 | ScalarwrDhcpPort | read-write | current | This parameter defines the port that DHCP flow will be actiavted. |
| 1.3.6.1.4.1.164.11.7.2.2.1.6 | TabledhcpClientTable | not-accessible | current | A list of DHCP client entries. |
| 1.3.6.1.4.1.164.11.7.2.2.1.6.1 | RowdhcpClientEntry | not-accessible | current | DHCP Client parameters per entry of the DHCP Client table. |
| 1.3.6.1.4.1.164.11.7.2.2.1.6.1.1 | ColumndhcpClientAction | read-write | current | This parameter default value is enable(3). Setting this attribute to disable (2), will disable DHCP Client action for this interface. This parameter can be cha… |
| 1.3.6.1.4.1.164.11.7.2.2.1.6.1.2 | ColumndhcpClientServerIpAddress | read-write | current | DHCP Server IP Address. |
| 1.3.6.1.4.1.164.11.7.2.2.1.6.1.3 | ColumndhcpClientLeaseExpirationTime | read-only | current | This parameter holds the time (in minutes) left until lease expiration. |
| 1.3.6.1.4.1.164.11.7.2.2.1.6.1.4 | ColumndhcpClientStatus | read-only | current | This parametr displays the DHCP status. |
| 1.3.6.1.4.1.164.11.7.2.2.1.7 | TabledhcpIfClientTable | not-accessible | current | DHCP client entries for each Interface. |
| 1.3.6.1.4.1.164.11.7.2.2.1.7.1 | RowdhcpIfClientEntry | not-accessible | current | DHCP Clients per entry of the DHCP Interface Client table. |
| 1.3.6.1.4.1.164.11.7.2.2.1.7.1.2 | ColumndhcpIfClientIpAddress | read-only | current | DHCP Client IP Address. |
| 1.3.6.1.4.1.164.11.7.2.2.1.7.1.3 | ColumndhcpIfClientRowStatus | read-create | current | The row status used for creating, modifying, and deleting instances of the columnar objects in the dhcpIfClientTable. For Vmux Devices, it will be possible onl… |
| 1.3.6.1.4.1.164.11.7.2.2.1.8 | ScalardhcpServerAction | read-write | current | This variable enables the operator to perform one of the specified actions on the Server. deleteAllClients (3) is an option that is used for a device functioni… |
| 1.3.6.1.4.1.164.11.7.2.2.1.9 | TabledhcpClientNTable | not-accessible | current | The DHCP Client table (New). |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1 | RowdhcpClientNEntry | not-accessible | current | An entry of this table. |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.1 | ColumndhcpClientIndex | not-accessible | current | The DHCP Client index. Index can be ifIndex and/or index of a router interface or host. |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.2 | ColumndhcpClientAdminStatus | read-write | current | The Administrative Status of DHCP client. |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.3 | ColumndhcpClientOperStatus | read-only | current | The Operational Status of DHCP client. |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.4 | ColumndhcpClientAddressType | read-write | current | The Address Type of all InetAddress objects. |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.5 | ColumndhcpClientAddress | read-only | current | The DHCP Client Address, which is assigned by the DHCP server. |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.6 | ColumndhcpClientAddressMask | read-only | current | The DHCP Client Address Mask, which is assigned by the DHCP server. |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.7 | ColumndhcpClientNextHop | read-only | current | The Next Hop (Default Gateway) of the DHCP client. |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.8 | ColumndhcpClientServerAddress | read-write | current | The DHCP Server Address. Although object is defined as read-write, current support is read-only. |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.9 | ColumndhcpClientActualLeaseTime | read-only | current | The Actual Lease Time (for Address received from the server), measured in seconds. Value=FFFFFFFF represents an infinite actual lease time. |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.10 | ColumndhcpClientRemainLeaseTime | read-only | current | The Remaining Lease Time (for Address received from the server), measured in seconds. Value=FFFFFFFF represents an infinite remaining lease time. |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.11 | ColumndhcpClientCommand | read-write | current | The possible commands of DHCP client to DHCP server. Upon performing a command, value should be automatically returned to off(2). |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.12 | ColumndhcpClientOpAdminStatus | read-write | current | The Administrative Status of the different options. Bit=1 means that respective option is enabled/activated. |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.13 | ColumndhcpClientOpVendorClassId | read-write | current | The Vendor Class Identifier. Identifier should include at least 1 character. |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.14 | ColumndhcpClientOpIpAddrLeaseTime | read-write | current | The IP Address Lease Time, measured in seconds. |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.15 | ColumndhcpClientOpServerId | read-write | current | The Server Identifier (reported IP Address). |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.16 | ColumndhcpClientOpClientIdType | read-write | current | The Client Identifier Type. Type=0 indicates that Client Identifier is a string, which is set by dhcpClientOpClientId. Type=1 indicates that Client Identifier … |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.17 | ColumndhcpClientOpClientId | read-write | current | The Client Identifier. Identifier should include at least 1 character. When Type=1 (dhcpClientOpClientIdType), it means that current object is read-only as it … |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.18 | ColumndhcpClientOpHostName | read-write | current | The Host Name. Name should include at least 1 character. |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.19 | ColumndhcpClientOpDns | read-only | current | The Domain Name Server (DNS), which is a list of servers available to the client. This object should include at least 4 octets and must always be a multiple of… |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.20 | ColumndhcpClientOpTftpServerName | read-only | current | The TFTP Server Name. Name should include at least 1 character. |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.21 | ColumndhcpClientOpBootFileName | read-only | current | The Boot File Name. Name should include at least 1 character. |
| 1.3.6.1.4.1.164.11.7.2.2.2 | NodewrConfigIpDNS | |||
| 1.3.6.1.4.1.164.11.7.2.2.2.1 | ScalarwrDNSRelayAction | read-write | current | When Enabled, device will act as a DNS Relay: whenever the device receives a DNS request from its host, it will forward it to the DNS server as if the request … |
| 1.3.6.1.4.1.164.11.7.2.3 | NodewrConfigIpxRouterInfo | |||
| 1.3.6.1.4.1.164.11.7.2.3.1 | ScalarwrAutoLearnLanIpxNets | read-write | current | Activating (disable/enable) the auto-learn operation. |
| 1.3.6.1.4.1.164.11.7.2.3.2 | TablewrLanIpxNetTable | not-accessible | current | Lan IPX nets Table. |
| 1.3.6.1.4.1.164.11.7.2.3.2.1 | RowwrLanIpxNetEntry | not-accessible | current | IPX Nets per frame type & LAN port. The table entries will be created by the agent |
| 1.3.6.1.4.1.164.11.7.2.3.2.1.1 | ColumnwrLanifIndex | read-only | current | LAN port ifIndex. |
| 1.3.6.1.4.1.164.11.7.2.3.2.1.2 | ColumnwrLanIpxFrameType | read-only | current | Frame Type |
| 1.3.6.1.4.1.164.11.7.2.3.2.1.3 | ColumnwrIpxNetAddress | read-write | current | Net address per Frame Type & LAN port. |
| 1.3.6.1.4.1.164.11.7.2.3.3 | ScalarwrDialInIpxNet | read-write | current | Net address through a link. |
| 1.3.6.1.4.1.164.11.7.2.3.4 | TableripSapIfConfTable | not-accessible | current | A list of Interfaces which require separate configuration in RIP/SAP. |
| 1.3.6.1.4.1.164.11.7.2.3.4.1 | RowripSapIfConfEntry | not-accessible | current | A Single Routing Domain in a single Subnet. |
| 1.3.6.1.4.1.164.11.7.2.3.4.1.1 | ColumnripSapIfConfIfIndex | read-only | current | The interface ifIndex. |
| 1.3.6.1.4.1.164.11.7.2.3.4.1.2 | ColumnripSapIfConfMode | read-create | current | The ifIndex RIP/SAP mode. |
| 1.3.6.1.4.1.164.11.7.2.3.4.1.3 | ColumnripSapIfConfStatus | read-create | current | This attribute allows to create/delete a row in this table. For creating a row, the NMS should set ripSapIfConfStatus.id1 = active(1). For destroying a row, th… |
| 1.3.6.1.4.1.164.11.7.2.4 | NodewrInterface | |||
| 1.3.6.1.4.1.164.11.7.2.4.1 | TablewrIpAddressTable | not-accessible | current | Link IP addresses Table. |
| 1.3.6.1.4.1.164.11.7.2.4.1.1 | RowwrIpAddressEntry | not-accessible | current | Ip Address per Link |
| 1.3.6.1.4.1.164.11.7.2.4.1.1.1 | ColumnwrIpIfIndex | read-only | current | Port interface index. |
| 1.3.6.1.4.1.164.11.7.2.4.1.1.2 | ColumnwrIpAddress | read-create | current | Link IP Address. |
| 1.3.6.1.4.1.164.11.7.2.4.1.1.3 | ColumnwrIpMask | read-create | current | Link IP mask Address. |
| 1.3.6.1.4.1.164.11.7.2.4.1.1.4 | ColumnwrIpRowStatus | read-create | current | This attribute allows to create/delete a row in this table. For creating a row, the NMS should set wrIpRowStatus.id1 = active(1). For destroying a row, the NMS… |
| 1.3.6.1.4.1.164.11.7.2.4.2 | TablewrSpoofingTable | not-accessible | current | Spoofing Table. |
| 1.3.6.1.4.1.164.11.7.2.4.2.1 | RowwrSpoofingEntry | not-accessible | current | Spoofing per Link |
| 1.3.6.1.4.1.164.11.7.2.4.2.1.1 | ColumnwrSpoofingIfIndex | read-only | current | Port interface index. |
| 1.3.6.1.4.1.164.11.7.2.4.2.1.2 | ColumnwrSpoofingAction | read-create | current | |
| 1.3.6.1.4.1.164.11.7.2.4.2.1.3 | ColumnwrSpoofingAgingStation | read-create | current | |
| 1.3.6.1.4.1.164.11.7.2.4.2.1.4 | ColumnwrSpoofingRowStatus | read-create | current | This attribute allows to create/delete a row in this table. For creating a row, the NMS should set wrSpoofingRowStatus.id1 = active(1). For destroying a row, t… |
| 1.3.6.1.4.1.164.11.7.2.4.3 | TablewrLanIfTable | not-accessible | current | Link IP addresses Table. |
| 1.3.6.1.4.1.164.11.7.2.4.3.1 | RowwrLanIfEntry | not-accessible | current | Ip Address per Link |
| 1.3.6.1.4.1.164.11.7.2.4.3.1.1 | ColumnwrLanIfIndex | read-only | current | Port interface index. |
| 1.3.6.1.4.1.164.11.7.2.4.3.1.2 | ColumnwrLanBridgeRouterMode | read-write | current | This parameter indicates whether the link is Bridge or Router and specifies the Router's type. |
| 1.3.6.1.4.1.164.11.7.2.4.3.1.3 | ColumnwrLanIfState | read-write | current | The LAN is disabled or enabled. For LAN 2 it can be also 'redundancy'. |
| 1.3.6.1.4.1.164.11.7.2.4.3.1.4 | ColumnwrLanIfRdnTimeout | read-write | current | LAN Redundancy Timeout in seconds. Applicable when wrLanIfState=redundancy. |
| 1.3.6.1.4.1.164.11.7.2.4.4 | TablewrSyncCnfgTable | not-accessible | current | Configuration table for Async interface. |
| 1.3.6.1.4.1.164.11.7.2.4.4.1 | RowwrSyncCnfgEntry | not-accessible | current | Configuration table |
| 1.3.6.1.4.1.164.11.7.2.4.4.1.1 | ColumnwrSyncIfIndex | read-only | current | Sync interface index. |
| 1.3.6.1.4.1.164.11.7.2.4.4.1.2 | ColumnwrSyncClkMode | read-write | current | Clock Mode. |
| 1.3.6.1.4.1.164.11.7.2.4.4.1.3 | ColumnwrSyncClkRate | read-write | current | Clock Rate in. Rate can be changed if Clock Mode is Program only. |
| 1.3.6.1.4.1.164.11.7.2.4.5 | TablewrFrCnfgTable | not-accessible | current | Configuration table for Fr parameters that do not exist in RFC2115. |
| 1.3.6.1.4.1.164.11.7.2.4.5.1 | RowwrFrCnfgEntry | not-accessible | current | Configuration entry for Fr parameters that do not exist in RFC2115. |
| 1.3.6.1.4.1.164.11.7.2.4.5.1.1 | ColumnwrFrDlciLearningMode | read-write | current | This parameter enables the webranger to learn the DLCi's configuration and maintanance protocol for the current interface. off - the WR will read the user's co… |
| 1.3.6.1.4.1.164.11.7.2.4.5.1.2 | ColumnwrFrCllmMessages | read-write | current | This parameter enables/disables the Webranger to Tx/Rx CLLM (Consolidated Link Layer Management) messages via DLCI 1023. The CLLM messages are link layer contr… |
| 1.3.6.1.4.1.164.11.7.3 | NodeipRouter | |||
| 1.3.6.1.4.1.164.11.7.3.1 | TablertrIfIpTable | not-accessible | current | Router interfaces table. |
| 1.3.6.1.4.1.164.11.7.3.1.1 | RowrtrIfIpEntry | not-accessible | current | An entry in table rtrIfIpTable. |
| 1.3.6.1.4.1.164.11.7.3.1.1.1 | ColumnrtrIfIp | read-only | current | IP Address. |
| 1.3.6.1.4.1.164.11.7.3.1.1.2 | ColumnrtrIfRowStatus | read-create | current | . |
| 1.3.6.1.4.1.164.11.7.3.1.1.3 | ColumnrtrIfIpMask | read-create | current | IP mask Address. |
| 1.3.6.1.4.1.164.11.7.3.1.1.4 | ColumnrtrIfIndex | read-create | current | The ifIndex connection, on which the IP is determined. |
| 1.3.6.1.4.1.164.11.7.3.1.1.5 | ColumnrtrIfMng | read-create | current | An IP interface might be determined as a management connection (under the product limitations). |
| 1.3.6.1.4.1.164.11.7.3.1.1.6 | ColumnrtrIfVlanId | read-create | current | The VLAN ID assigned to Tagged frames transmitted from this port. The value inserted should be a defined VLAN. |
| 1.3.6.1.4.1.164.11.7.3.2 | TablebrtrIfTable | not-accessible | current | LAN interface table. |
| 1.3.6.1.4.1.164.11.7.3.2.1 | RowbrtrIfEntry | not-accessible | current | The entries of this table will be created by agent. |
| 1.3.6.1.4.1.164.11.7.3.2.1.1 | ColumnbrtrIfIndex | read-only | current | The index of the interface (LAN or ATM). |
| 1.3.6.1.4.1.164.11.7.3.2.1.2 | ColumnbrtrIfMode | read-write | current | Connection Mode. |
| 1.3.6.1.4.1.164.11.7.3.2.1.3 | ColumnbrtrIfMaxFrameSize | read-write | current | Frame Max Size. |
| 1.3.6.1.4.1.164.11.7.3.3 | ScalarrtrArpAgingTime | read-write | current | ARP Aging Time. Applicable for a Router Mode and for a Brouter Mode. |
| 1.3.6.1.4.1.164.11.7.3.4 | TablebrtrLanIfTable | not-accessible | current | LAN interface table. |
| 1.3.6.1.4.1.164.11.7.3.4.1 | RowbrtrLanIfEntry | not-accessible | current | The entries of this table will be created by agent . |
| 1.3.6.1.4.1.164.11.7.3.4.1.1 | ColumnbrtrLanIfIndex | read-only | current | The index of the LAN entity (physical interface). |
| 1.3.6.1.4.1.164.11.7.3.4.1.2 | ColumnbrtrLanIpAddress | read-write | current | Host IP address. Applicable for bridge mode connection only. |
| 1.3.6.1.4.1.164.11.7.3.4.1.3 | ColumnbrtrLanIpMask | read-write | current | Host IP Mask. Applicable for bridge mode connection only. |
| 1.3.6.1.4.1.164.11.7.3.4.1.4 | ColumnbrtrLanMaxRateEnable | read-only | current | This parameter determines the HW ability of the LAN card according to HW. |
| 1.3.6.1.4.1.164.11.7.3.4.1.5 | ColumnbrtrLanMaxRate | read-write | current | Max Rate. |
| 1.3.6.1.4.1.164.11.7.3.4.1.6 | ColumnbrtrLanMng | read-write | current | An IP interface might be determined as a management connection (under the product limitations). |
| 1.3.6.1.4.1.164.11.7.3.4.1.7 | ColumnbrtrLanDefaultRouter | read-write | current | Default Router's (Gateway's) IP Address. For each LAN interface there may be a different Default Router. |
| 1.3.6.1.4.1.164.11.7.3.5 | TablertrIsdnIfTable | not-accessible | current | This table contains ISDN parameters that do not appear in the standard MIBs. |
| 1.3.6.1.4.1.164.11.7.3.5.1 | RowrtrIsdnIfEntry | not-accessible | current | Entries for ISDN parameters that do not appear in the standard MIBs. |
| 1.3.6.1.4.1.164.11.7.3.5.1.1 | ColumnrtrIsdnIfMinNumBchans | read-create | current | Minimum number of B channels that the ISDN Dialer of the router will use for Dialing out. This parameter will be used for the BOD (Bandwidth On Demand) feature… |
| 1.3.6.1.4.1.164.11.7.3.5.1.2 | ColumnrtrIsdnIfMaxNumBchans | read-create | current | Maximum number of B channels that the ISDN Dialer of the router will use for Dialing out. This parameter will be used for the BOD (Bandwidth On Demand) feature… |
| 1.3.6.1.4.1.164.11.7.3.6 | TablertrLcrTable | not-accessible | current | Least Cost Routing Table. The user will be able to set a prefix for an outgoing number that arrives with a predefined prefix in order to redirect the number fo… |
| 1.3.6.1.4.1.164.11.7.3.6.1 | RowrtrLcrEntry | not-accessible | current | Least Cost Routing Entry. |
| 1.3.6.1.4.1.164.11.7.3.6.1.1 | ColumnrtrLcrOutIfIndex | not-accessible | current | The outgoing interface Number of the current route. The incoming interface number is the value of ifIndex. |
| 1.3.6.1.4.1.164.11.7.3.6.1.2 | ColumnrtrLcrRowStatus | read-create | current | Row Status for adding/destroying rows. |
| 1.3.6.1.4.1.164.11.7.3.6.1.3 | ColumnrtrLcrInPrefix | read-create | current | This prefix is part of the called number existing in the incoming packet. |
| 1.3.6.1.4.1.164.11.7.3.6.1.4 | ColumnrtrLcrOutPrefix | read-create | current | This prefix will be inserted into the outgoing packet. |
| 1.3.6.1.4.1.164.11.8 | NodemulticastGen | |||
| 1.3.6.1.4.1.164.11.8.1 | ScalarmulticastMode | read-write | current | According to this mode the packets will be forwarded. If disable (2) is selected, there will be no multicast. |
| 1.3.6.1.4.1.164.11.9 | NoderadRouterConfig | |||
| 1.3.6.1.4.1.164.11.9.1 | TablertrConfigTable | not-accessible | current | The Router's Configuration table. |
| 1.3.6.1.4.1.164.11.9.1.1 | RowrtrConfigEntry | not-accessible | current | An entry in the Router's Configuration table. |
| 1.3.6.1.4.1.164.11.9.1.1.1 | ColumnrtrConfigIndex | read-only | current | This object indicates the Router's Index. |
| 1.3.6.1.4.1.164.11.9.1.1.2 | ColumnrtrConfigDefaultGateway | read-write | current | Router Default Gateway. |
| 1.3.6.1.4.1.164.11.9.1.1.3 | ColumnrtrConfigArpAgingTime | read-write | current | ARP Aging Time. |
| 1.3.6.1.4.1.164.11.9.1.1.5 | ColumnrtrConfigClassifierTosMask | read-write | current | This object indicates the Classifier's TOS Mask, as follows: 0x1C for DTR 0x1E for Cisco 0xE0 for Precedence 0xFC for Diffserv Else for Manual . |
| 1.3.6.1.4.1.164.11.9.1.1.6 | ColumnrtrConfigRIPMode | read-write | current | This object determines the Router Information Protocol to measure the shortest path between 2 positions on the network. |
| 1.3.6.1.4.1.164.11.9.2 | ScalarrtrSystemAddress | read-write | current | This object represents the System Address. |
| 1.3.6.1.4.1.164.11.9.3 | TablertrFwdTable | not-accessible | current | The Router's Forwarding Table. |
| 1.3.6.1.4.1.164.11.9.3.1 | RowrtrFwdEntry | not-accessible | current | An entry in the Router's Forwarding table. |
| 1.3.6.1.4.1.164.11.9.3.1.1 | ColumnrtrFwdIdx | read-only | current | This object indicates the Router Index. |
| 1.3.6.1.4.1.164.11.9.3.1.2 | ColumnrtrFwdIpAddress | read-only | current | This object indicates the Destination IP Address. |
| 1.3.6.1.4.1.164.11.9.3.1.3 | ColumnrtrFwdIpMask | read-only | current | This object indicates the Mask IP address. |
| 1.3.6.1.4.1.164.11.9.3.1.4 | ColumnrtrFwdRuleIdx | read-only | current | This object indicates the Rule's Number. |
| 1.3.6.1.4.1.164.11.9.3.1.5 | ColumnrtrFwdRowStatus | read-create | current | This object enables the user to create/delete entries in this table. Entry of Type rtrFwdType = staticRouting(3) are created by the user. Only this type of ent… |
| 1.3.6.1.4.1.164.11.9.3.1.6 | ColumnrtrFwdNextHop | read-create | current | This object indicates the IP Address of the Next Hop. |
| 1.3.6.1.4.1.164.11.9.3.1.7 | ColumnrtrFwdIfIndex | read-only | current | This object indicates the Interface Index. |
| 1.3.6.1.4.1.164.11.9.3.1.8 | ColumnrtrFwdType | read-create | current | The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is … |
| 1.3.6.1.4.1.164.11.9.3.1.9 | ColumnrtrFwdProto | read-only | current | The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support th… |
| 1.3.6.1.4.1.164.11.9.3.1.10 | ColumnrtrFwdEthQueue | read-create | current | This object indicates the ETH Queue number. |
| 1.3.6.1.4.1.164.11.9.3.1.11 | ColumnrtrFwdMetric1 | read-create | current | The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rtrFwdProto value. If t… |
| 1.3.6.1.4.1.164.11.9.4 | TablertrPbrTable | not-accessible | current | The Router's Forwarding Table. |
| 1.3.6.1.4.1.164.11.9.4.1 | RowrtrPbrEntry | not-accessible | current | An entry in the Router's Policy Based Routing (PBR) table. |
| 1.3.6.1.4.1.164.11.9.4.1.1 | ColumnrtrPbrIdx | not-accessible | current | This object indicates the Router Index. |
| 1.3.6.1.4.1.164.11.9.4.1.2 | ColumnrtrPbrInterface | not-accessible | current | Router interface for which this match-set rule applies. |
| 1.3.6.1.4.1.164.11.9.4.1.3 | ColumnrtrPbrRuleIdx | not-accessible | current | This object indicates the Policy Based Routing (PBR) match-set rule index. |
| 1.3.6.1.4.1.164.11.9.4.1.4 | ColumnrtrPbrRowStatus | read-create | current | This object enables the user to create/delete entries of this table. |
| 1.3.6.1.4.1.164.11.9.4.1.5 | ColumnrtrPbrMatchAllFrames | read-create | current | Forwarding decision is made regardless PBR Rule (as if all conditions are matched) |
| 1.3.6.1.4.1.164.11.9.4.1.6 | ColumnrtrPbrSourceIpAddress | read-create | current | Received frame source IP Address. |
| 1.3.6.1.4.1.164.11.9.4.1.7 | ColumnrtrPbrSourceIpMask | read-create | current | The subnet mask of the source IP Address. |
| 1.3.6.1.4.1.164.11.9.4.1.8 | ColumnrtrPbrDestIpAddress | read-create | current | Received frame destination IP Address. |
| 1.3.6.1.4.1.164.11.9.4.1.9 | ColumnrtrPbrDestIpMask | read-create | current | The subnet mask of the destination IP Address. |
| 1.3.6.1.4.1.164.11.9.4.1.10 | ColumnrtrPbrIpProtocol | read-create | current | Value of Protocol field in IP Frame header. |
| 1.3.6.1.4.1.164.11.9.4.1.11 | ColumnrtrPbrMinFrameLength | read-create | current | . |
| 1.3.6.1.4.1.164.11.9.4.1.12 | ColumnrtrPbrMaxFrameLength | read-create | current | . |
| 1.3.6.1.4.1.164.11.9.4.1.13 | ColumnrtrPbrDiscardFrame | read-create | current | Discard a frame when rule is matched . |
| 1.3.6.1.4.1.164.11.9.4.1.14 | ColumnrtrPbrForwardingInterface | read-create | current | The router Interface through which the frame should be forwarded, when rule is matched. If there's no forwarding interface, then this object has a value of zero |
| 1.3.6.1.4.1.164.11.9.4.1.15 | ColumnrtrPbrNextHop | read-create | current | IP Address of Next Hop, when Forwarding Interface is LAN, or has BridgePDU (BVI) encapsulation. |
| 1.3.6.1.4.1.164.12 | NoderadAtm | |||
| 1.3.6.1.4.1.164.12.0 | IdentityradAtmEvents | current | The events for RAD ATM. | |
| 1.3.6.1.4.1.164.12.0.1 | NotificationalarmTrap | current | This trap is sent whenever an alarm occurs in the agent. | |
| 1.3.6.1.4.1.164.12.0.2 | NotificationstatusChangeTrap | current | This trap is sent whenever a led in the agent change it's status. | |
| 1.3.6.1.4.1.164.12.0.3 | NotificationatmSuAgnNoBufferToNetwork | current | This trap usualy indicates timing problem; incorrect selection of timing references between end users. | |
| 1.3.6.1.4.1.164.12.0.4 | NotificationatmSuJitterBufferOverrun | current | This trap indicates that an overrun event occurred in the ATM jitter buffer serving the transmit to user direction of the user interface specified by ifAlias | |
| 1.3.6.1.4.1.164.12.0.5 | NotificationatmSuJitterBufferUnderrun | current | This trap indicates that an underrun event occurred in the atm jitter buffer serving the transmit to user direction of the user interface specified by ifAlias. | |
| 1.3.6.1.4.1.164.12.0.6 | NotificationatmSuDataLocalLoopbackTrap | current | This trap indicates that a local loopback has been activated on the local data port. | |
| 1.3.6.1.4.1.164.12.0.7 | NotificationatmSuDataRemoteLoopbackTrap | current | This trap indicates that a remote loopback has been activated on the local data port. | |
| 1.3.6.1.4.1.164.12.2 | NodeatmGen | |||
| 1.3.6.1.4.1.164.12.2.1 | NodeatmPerfHistory | |||
| 1.3.6.1.4.1.164.12.2.1.1 | NodeatmIfPerformance | |||
| 1.3.6.1.4.1.164.12.2.1.1.1 | TableatmIfDataTable | not-accessible | current | The ATM interface Data table. |
| 1.3.6.1.4.1.164.12.2.1.1.1.1 | RowatmIfDataEntry | not-accessible | current | An entry in the ATM interface Data table. |
| 1.3.6.1.4.1.164.12.2.1.1.1.1.1 | ColumnatmIfTimeElapsed | read-only | current | The number of seconds that have elapsed since the beginning of the near end current error- measurement period. |
| 1.3.6.1.4.1.164.12.2.1.1.1.1.2 | ColumnatmIfValidIntervals | read-only | current | The number of previous near end intervals for which valid data was collected. The value will be 96 unless the interface was brought online within the last 24 h… |
| 1.3.6.1.4.1.164.12.2.1.1.1.1.3 | ColumnatmIfTxCells | read-only | current | The counter associated with the total number of transmitted cells, encountered by an ATM interface. |
| 1.3.6.1.4.1.164.12.2.1.1.1.1.4 | ColumnatmIfRxCells | read-only | current | The counter associated with the total number of received cells, encountered by an ATM interface. |
| 1.3.6.1.4.1.164.12.2.1.1.1.1.5 | ColumnatmIfUncorrectedHecs | read-only | current | The counter associated with the total number of cells with uncorrected HEC errors, encountered by an ATM interface. |
| 1.3.6.1.4.1.164.12.2.1.1.2 | TableatmIfCurrentTable | not-accessible | current | The ATM interface Current table. |
| 1.3.6.1.4.1.164.12.2.1.1.2.1 | RowatmIfCurrentEntry | not-accessible | current | An entry in the ATM interface Current table. |
| 1.3.6.1.4.1.164.12.2.1.1.2.1.1 | ColumnatmIfCurrentTxCells | read-only | current | The counter associated with the number of transmitted cells, encountered by an ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.1.2.1.2 | ColumnatmIfCurrentRxCells | read-only | current | The counter associated with the number of received cells, encountered by an ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.1.2.1.3 | ColumnatmIfCurrentCorrectedHecs | read-only | current | The counter associated with the number of cells with corrected HEC errors, encountered by an ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.1.2.1.4 | ColumnatmIfCurrentUncorrectedHecs | read-only | current | The counter associated with the number of cells with uncorrected HEC errors, encountered by an ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.1.2.1.5 | ColumnatmIfCurrentHecErrorSeconds | read-only | current | The counter associated with the number of seconds with HEC errors, encountered by an ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.1.3 | TableatmIfIntervalTable | not-accessible | current | The ATM interface Interval table. |
| 1.3.6.1.4.1.164.12.2.1.1.3.1 | RowatmIfIntervalEntry | not-accessible | current | An entry in the ATM interface Interval table. |
| 1.3.6.1.4.1.164.12.2.1.1.3.1.1 | ColumnatmIfIntervalNumber | read-only | current | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that … |
| 1.3.6.1.4.1.164.12.2.1.1.3.1.2 | ColumnatmIfIntervalTxCells | read-only | current | The counter associated with the number of transmitted cells , encountered by an ATM interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.1.3.1.3 | ColumnatmIfIntervalRxCells | read-only | current | The counter associated with the number of received cells, encountered by an ATM interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.1.3.1.4 | ColumnatmIfIntervalCorrectedHecs | read-only | current | The counter associated with the number of cells with corrected HEC errors, encountered by an ATM interface in one of the previous 96, individual 15 minute, int… |
| 1.3.6.1.4.1.164.12.2.1.1.3.1.5 | ColumnatmIfIntervalUncorrectedHecs | read-only | current | The counter associated with the number of cells with uncorrected HEC errors, encountered by an ATM interface in one of the previous 96, individual 15 minute, i… |
| 1.3.6.1.4.1.164.12.2.1.1.3.1.6 | ColumnatmIfIntervalHecErrorSeconds | read-only | current | The counter associated with the number of seconds with HEC errors, encountered by an ATM interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.1.4 | Tableaal5VccXTable | not-accessible | current | This table is an extension to AAL5 VCC Table. |
| 1.3.6.1.4.1.164.12.2.1.1.4.1 | Rowaal5VccXEntry | not-accessible | current | This list contains the additional AAL5 VCC performance parameters and is indexed by ifIndex values of AAL5 interfaces and the associated VPI/VCI values. |
| 1.3.6.1.4.1.164.12.2.1.1.4.1.1 | Columnaal5VccInFrames | read-only | current | The number of frames received via this interface. |
| 1.3.6.1.4.1.164.12.2.1.1.4.1.2 | Columnaal5VccOutFrames | read-only | current | The total number of frames transmitted out of the interface. |
| 1.3.6.1.4.1.164.12.2.1.1.4.1.3 | Columnaal5VccUnknownProtocolFrames | read-only | current | The number of frames that were discarded due to unsupported protocol encapsulation on this VCC. |
| 1.3.6.1.4.1.164.12.2.1.1.5 | Tableaal5VccCurrentTable | not-accessible | current | The AAL5 Current table. |
| 1.3.6.1.4.1.164.12.2.1.1.5.1 | Rowaal5VccCurrentEntry | not-accessible | current | An entry in the AAL5 Current table. |
| 1.3.6.1.4.1.164.12.2.1.1.5.1.1 | Columnaal5VccCurrentInFrames | read-only | current | The counter associated with the number of received frames, encountered by the AAL5 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.1.5.1.2 | Columnaal5VccCurrentOutFrames | read-only | current | The counter associated with the number of transmitted frames, encountered by the AAL5 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.1.5.1.3 | Columnaal5VccCurrentUnknownProtocolFrames | read-only | current | The counter associated with the number of frames that were discarded due to unsupported protocol encapsulation, encountered by the AAL5 interface in the curren… |
| 1.3.6.1.4.1.164.12.2.1.1.5.1.4 | Columnaal5VccCurrentCrcErrors | read-only | current | The counter associated with the number of AAL5 CPCS PDUs received with CRC-32 errors, encountered by the AAL5 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.1.5.1.5 | Columnaal5VccCurrentLengthError | read-only | current | The counter associated with the number of received frames with length error, encountered by the AAL5 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.1.5.1.6 | Columnaal5VccCurrentInputCongestionDropped | read-only | current | The counter associated with the number of dropped frames due to congestion, encountered by the AAL5 interface on the Receive direction in the current 15 minute… |
| 1.3.6.1.4.1.164.12.2.1.1.5.1.7 | Columnaal5VccCurrentOutputCongestionDropped | read-only | current | The counter associated with the number of dropped frames due to congestion, encountered by the AAL5 interface on the Transmit direction in the current 15 minut… |
| 1.3.6.1.4.1.164.12.2.1.1.6 | Tableaal5VccIntervalTable | not-accessible | current | The AAL5 Interval table. |
| 1.3.6.1.4.1.164.12.2.1.1.6.1 | Rowaal5VccIntervalEntry | not-accessible | current | An entry in the AAL5 Interval table. |
| 1.3.6.1.4.1.164.12.2.1.1.6.1.1 | Columnaal5VccIntervalNumber | read-only | current | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that … |
| 1.3.6.1.4.1.164.12.2.1.1.6.1.2 | Columnaal5VccIntervalInFrames | read-only | current | The counter associated with the number of received frames, encountered by the AAL5 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.1.6.1.3 | Columnaal5VccIntervalOutFrames | read-only | current | The counter associated with the number of transmitted frames, encountered by the AAL5 interface in in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.1.6.1.4 | Columnaal5VccIntervalUnknownProtocolFrames | read-only | current | The counter associated with the number of frames that were discarded due to unsupported protocol encapsulation, encountered by the AAL5 interface in one of the… |
| 1.3.6.1.4.1.164.12.2.1.1.6.1.5 | Columnaal5VccIntervalCrcErrors | read-only | current | The counter associated with the number of AAL5 CPCS PDUs received with CRC-32 errors, encountered by the AAL5 interface in one of the previous 96, individual 1… |
| 1.3.6.1.4.1.164.12.2.1.1.6.1.6 | Columnaal5VccIntervalLengthError | read-only | current | The counter associated with the number of received frames with length error, encountered by the AAL5 interface in one of the previous 96, individual 15 minute,… |
| 1.3.6.1.4.1.164.12.2.1.1.6.1.7 | Columnaal5VccIntervalInputCongestionDropped | read-only | current | The counter associated with the number of dropped frames due to a congestion, encountered by the AAL5 interface on the Receive direction in one of the previous… |
| 1.3.6.1.4.1.164.12.2.1.1.6.1.8 | Columnaal5VccIntervalOutputCongestionDropped | read-only | current | The counter associated with the number of dropped frames due to a congestion, encountered by the AAL5 interface on the Transmit direction in one of the previou… |
| 1.3.6.1.4.1.164.12.2.1.2 | NodeatmPvcPerformance | |||
| 1.3.6.1.4.1.164.12.2.1.2.1 | NodeatmVpPerformance | |||
| 1.3.6.1.4.1.164.12.2.1.2.1.1 | TableatmVpCurrentTable | not-accessible | current | The ATM VP Current table. |
| 1.3.6.1.4.1.164.12.2.1.2.1.1.1 | RowatmVpCurrentEntry | not-accessible | current | An entry in the ATM VP Current table. |
| 1.3.6.1.4.1.164.12.2.1.2.1.1.1.1 | ColumnatmVpCurrentVpi | read-only | current | The VPI of the VPL. |
| 1.3.6.1.4.1.164.12.2.1.2.1.1.1.2 | ColumnatmVpCurrentRxCellsClp01 | read-only | current | The counter associated with the number of transmitted cells, encountered by the VPL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.1.1.1.3 | ColumnatmVpCurrentRxCellsClp0 | read-only | current | The counter associated with the number of received cells, encountered by the VPL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.1.1.1.4 | ColumnatmVpCurrentGcra0Violations | read-only | current | The counter associated with the number of cells violating GCRA0, encountered by the VPL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.1.1.1.5 | ColumnatmVpCurrentGcra1Violations | read-only | current | The counter associated with the number of cells violating GCRA1, encountered by the VPL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.1.1.1.6 | ColumnatmVpCurrentRxAIS | read-only | current | The counter associated with the number of received AIS cells, encountered by the VPL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.1.1.1.7 | ColumnatmVpCurrentTxAIS | read-only | current | The counter associated with the number of transmitted AIS cells, encountered by the VPL of this ATM interface in the current 15 minute interval. Not Supported … |
| 1.3.6.1.4.1.164.12.2.1.2.1.1.1.8 | ColumnatmVpCurrentRxRDI | read-only | current | The counter associated with the number of received RDI cells, encountered by the VPL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.1.1.1.9 | ColumnatmVpCurrentTxRDI | read-only | current | The counter associated with the number of transmitted RDI cells, encountered by the VPL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.1.1.1.10 | ColumnatmVpCurrentContinuityLoss | read-only | current | The counter associated with the number of loss of continuity cells, encountered by the VPL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.1.1.1.11 | ColumnatmVpCurrentUAS | read-only | current | The counter associated with the number of Unavailable Seconds, encountered by the VPL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.1.1.1.12 | ColumnatmVpCurrentSES | read-only | current | The counter associated with the number of Severerly Errored Seconds, encountered by the VPL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.1.1.1.13 | ColumnatmVpCurrentCDC | read-only | current | Amount of cells dropped in the current 15 minute interval of the VP connection. |
| 1.3.6.1.4.1.164.12.2.1.2.1.1.1.14 | ColumnatmVpCurrentTotalDiscards | read-only | current | The total number of valid ATM cells discarded by the traffic policing entity. This includes cells originally received with CLP=0 and CLP=1. |
| 1.3.6.1.4.1.164.12.2.1.2.1.1.1.15 | ColumnatmVpCurrentClp0Discards | read-only | current | The total number of valid ATM cells received with CLP=0 and discarded by the traffic policing entity. |
| 1.3.6.1.4.1.164.12.2.1.2.1.1.1.16 | ColumnatmVpCurrentTotalCellOuts | read-only | current | The total number of valid ATM cells transmitted by this VPL. This includes both CLP=0 and CLP=1 cells. |
| 1.3.6.1.4.1.164.12.2.1.2.1.1.1.17 | ColumnatmVpCurrentClp0CellOuts | read-only | current | The total number of valid ATM cells transmitted with CLP=0 by this VPL. |
| 1.3.6.1.4.1.164.12.2.1.2.1.1.1.18 | ColumnatmVpCurrentTaggedOuts | read-only | current | The total number of valid ATM cells tagged by the traffic policing entity from CLP=0 to CLP=1 and transmitted by this VPL. |
| 1.3.6.1.4.1.164.12.2.1.2.1.1.1.19 | ColumnatmVpCurrentPCR | read-only | current | The maximum traffic rate encountered in the last interval of the VP connection (monitored once a second). |
| 1.3.6.1.4.1.164.12.2.1.2.1.1.1.20 | ColumnatmVpCurrentSCR | read-only | current | The average traffic rate during the last interval of the VP connection. |
| 1.3.6.1.4.1.164.12.2.1.2.1.1.1.21 | ColumnatmVpCurrentMCR | read-only | current | MCR - The minimum traffic rate encountered in the last interval of the VP connection (monitored once a second). |
| 1.3.6.1.4.1.164.12.2.1.2.1.1.1.22 | ColumnatmVpCurrentShaperTotalDiscards | read-only | current | The total number of cells (CLP0 and CLP1) discarded due to congestion by the traffic shaper. |
| 1.3.6.1.4.1.164.12.2.1.2.1.1.1.23 | ColumnatmVpCurrentShaperClp0Discards | read-only | current | The total number of CLP0 cells discarded due to congestion by the traffic shaper. |
| 1.3.6.1.4.1.164.12.2.1.2.1.1.1.24 | ColumnatmVpCurrentShaperClp1Discards | read-only | current | The total number of CLP1 cells discarded due to congestion by the traffic shaper. |
| 1.3.6.1.4.1.164.12.2.1.2.1.2 | TableatmVpPMCurrentTable | not-accessible | current | The ATM VP Current table for Performance Management. |
| 1.3.6.1.4.1.164.12.2.1.2.1.2.1 | RowatmVpPMCurrentEntry | not-accessible | current | An entry in the ATM VP Current table for Performance Management. |
| 1.3.6.1.4.1.164.12.2.1.2.1.2.1.1 | ColumnatmVpPMCurrentVpi | read-only | current | The VPI of the VPL. |
| 1.3.6.1.4.1.164.12.2.1.2.1.2.1.2 | ColumnatmVpPMCurrentDir | read-only | current | The direction of performance management. |
| 1.3.6.1.4.1.164.12.2.1.2.1.2.1.3 | ColumnatmVpPMCurrentTxClp01 | read-only | current | The counter associated with the number of transmitted CLP 0+1 cells, encountered by the VPL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.1.2.1.4 | ColumnatmVpPMCurrentTxClp0 | read-only | current | The counter associated with the number of transmitted CLP 0 cells, encountered by the VPL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.1.2.1.5 | ColumnatmVpPMCurrentRxClp01 | read-only | current | The counter associated with the number of received CLP 0+1 cells, encountered by the VPL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.1.2.1.6 | ColumnatmVpPMCurrentRxClp0 | read-only | current | The counter associated with the number of received CLP 0 cells, encountered by the VPL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.1.2.1.7 | ColumnatmVpPMCurrentErroredCells | read-only | current | The counter associated with the number of errored cells, encountered by the VPL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.1.2.1.8 | ColumnatmVpPMCurrentLostCells | read-only | current | The counter associated with the number of lost cells, encountered by the VPL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.1.2.1.9 | ColumnatmVpPMCurrentMisinsertedCells | read-only | current | The counter associated with the number of misinserted cells, encountered by the VPL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.1.2.1.10 | ColumnatmVpPMCurrentECB | read-only | current | The counter associated with the number of ECB, encountered by the VPL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.1.2.1.11 | ColumnatmVpPMCurrentSECB | read-only | current | The counter associated with the number of SECB, encountered by the VPL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.1.2.1.12 | ColumnatmVpPMCurrentES | read-only | current | The counter associated with the number of Errored Seconds, encountered by the VPL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.1.2.1.13 | ColumnatmVpPMCurrentSES | read-only | current | The counter associated with the number of Severely Errored Seconds, encountered by the VPL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.1.2.1.14 | ColumnatmVpPMCurrentUAS | read-only | current | The counter associated with the number of Unavailable Seconds, encountered by the VPL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.1.2.1.15 | ColumnatmVpPMCurrentIntervalQuality | read-only | current | If the number of errors per interval is superior to the atmNteUPLTCR value, the quality of service of the interval is declared as unacceptable. |
| 1.3.6.1.4.1.164.12.2.1.2.1.2.1.16 | ColumnatmVpPMCurrentLastDayQuality | read-only | current | If the number of errors per 24 hours is superior to the atmNteDPLTCR value, the quality of service of the day is declared as degraded. |
| 1.3.6.1.4.1.164.12.2.1.2.1.3 | TableatmVpIntervalTable | not-accessible | current | The ATM Vp Interval table. |
| 1.3.6.1.4.1.164.12.2.1.2.1.3.1 | RowatmVpIntervalEntry | not-accessible | current | An entry in the ATM Vp Interval table. |
| 1.3.6.1.4.1.164.12.2.1.2.1.3.1.1 | ColumnatmVpIntervalVpi | read-only | current | The VPI of the VPL. |
| 1.3.6.1.4.1.164.12.2.1.2.1.3.1.2 | ColumnatmVpIntervalNumber | read-only | current | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that … |
| 1.3.6.1.4.1.164.12.2.1.2.1.3.1.3 | ColumnatmVpIntervalRxCellsClp01 | read-only | current | The counter associated with the number of transmitted cells , encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.2.1.3.1.4 | ColumnatmVpIntervalRxCellsClp0 | read-only | current | The counter associated with the number of received cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.2.1.3.1.5 | ColumnatmVpIntervalGcra0Violations | read-only | current | The counter associated with the number of cells violating GCRA0, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.2.1.3.1.6 | ColumnatmVpIntervalGcra1Violations | read-only | current | The counter associated with the number of cells violating GCRA1, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.2.1.3.1.7 | ColumnatmVpIntervalRxAIS | read-only | current | The counter associated with the number of received AIS cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.2.1.3.1.8 | ColumnatmVpIntervalTxAIS | read-only | current | The counter associated with the number of transmitted AIS cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.… |
| 1.3.6.1.4.1.164.12.2.1.2.1.3.1.9 | ColumnatmVpIntervalRxRDI | read-only | current | The counter associated with the number of received RDI cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.2.1.3.1.10 | ColumnatmVpIntervalTxRDI | read-only | current | The counter associated with the number of transmitted RDI cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.2.1.3.1.11 | ColumnatmVpIntervalContinuityLoss | read-only | current | The counter associated with the number of Continuity Loss cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.2.1.3.1.12 | ColumnatmVpIntervalUAS | read-only | current | The counter associated with the number of Unavailable Seconds, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.2.1.3.1.13 | ColumnatmVpIntervalSES | read-only | current | The counter associated with the number of Severerly Errored Seconds, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, interv… |
| 1.3.6.1.4.1.164.12.2.1.2.1.3.1.14 | ColumnatmVpIntervalCDC | read-only | current | Amount of cells dropped in the 15 minute interval of the VP connection. |
| 1.3.6.1.4.1.164.12.2.1.2.1.3.1.15 | ColumnatmVpIntervalTotalDiscards | read-only | current | The total number of valid ATM cells discarded by the traffic policing entity. This includes cells originally received with CLP=0 and CLP=1. |
| 1.3.6.1.4.1.164.12.2.1.2.1.3.1.16 | ColumnatmVpIntervalClp0Discards | read-only | current | The total number of valid ATM cells received with CLP=0 an discarded by the traffic policing entity. |
| 1.3.6.1.4.1.164.12.2.1.2.1.3.1.17 | ColumnatmVpIntervalTotalCellOuts | read-only | current | The total number of valid ATM cells transmitted by this VPL. This includes both CLP=0 and CLP=1 cells. |
| 1.3.6.1.4.1.164.12.2.1.2.1.3.1.18 | ColumnatmVpIntervalClp0CellOuts | read-only | current | The total number of valid ATM cells transmitted with CLP=0 by this VPL. |
| 1.3.6.1.4.1.164.12.2.1.2.1.3.1.19 | ColumnatmVpIntervalTaggedOuts | read-only | current | The total number of valid ATM cells tagged by the traffic policing entity from CLP=0 to CLP=1 and transmitted by this VPL. |
| 1.3.6.1.4.1.164.12.2.1.2.1.3.1.20 | ColumnatmVpIntervalPCR | read-only | current | The maximum traffic rate encountered in the last interval of the VP connection (monitored once a second) encountered by an ATM interface/VP in one of the previ… |
| 1.3.6.1.4.1.164.12.2.1.2.1.3.1.21 | ColumnatmVpIntervalSCR | read-only | current | The average traffic rate during the last interval of the VP connection , encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, in… |
| 1.3.6.1.4.1.164.12.2.1.2.1.3.1.22 | ColumnatmVpIntervalMCR | read-only | current | MCR - The minimum traffic rate encountered in the last interval of the VP connection (monitored once a second) encountered by an ATM interface/VP in one of the… |
| 1.3.6.1.4.1.164.12.2.1.2.1.3.1.23 | ColumnatmVpIntervalShaperTotalDiscards | read-only | current | The total number of cells (CLP0 and CLP1) discarded due to congestion by the traffic shaper. |
| 1.3.6.1.4.1.164.12.2.1.2.1.3.1.24 | ColumnatmVpIntervalShaperClp0Discards | read-only | current | The total number of CLP0 cells discarded due to congestion by the traffic shaper. |
| 1.3.6.1.4.1.164.12.2.1.2.1.3.1.25 | ColumnatmVpIntervalShaperClp1Discards | read-only | current | The total number of CLP1 cells discarded due to congestion by the traffic shaper. |
| 1.3.6.1.4.1.164.12.2.1.2.1.4 | TableatmVpPMIntervalTable | not-accessible | current | The ATM Vp Interval table for Performance Management. |
| 1.3.6.1.4.1.164.12.2.1.2.1.4.1 | RowatmVpPMIntervalEntry | not-accessible | current | An entry in the ATM Vp Interval table for Performance Management. |
| 1.3.6.1.4.1.164.12.2.1.2.1.4.1.1 | ColumnatmVpPMIntervalVpi | read-only | current | The VPI of the VPL. |
| 1.3.6.1.4.1.164.12.2.1.2.1.4.1.2 | ColumnatmVpPMIntervalDir | read-only | current | The direction of performance management. |
| 1.3.6.1.4.1.164.12.2.1.2.1.4.1.3 | ColumnatmVpPMIntervalNumber | read-only | current | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that … |
| 1.3.6.1.4.1.164.12.2.1.2.1.4.1.4 | ColumnatmVpPMIntervalTxClp01 | read-only | current | The counter associated with the number of transmitted CLP 0+1 cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, interv… |
| 1.3.6.1.4.1.164.12.2.1.2.1.4.1.5 | ColumnatmVpPMIntervalTxClp0 | read-only | current | The counter associated with the number of transmitted CLP 0 cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, interval… |
| 1.3.6.1.4.1.164.12.2.1.2.1.4.1.6 | ColumnatmVpPMIntervalRxClp01 | read-only | current | The counter associated with the number of received CLP 0+1 cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.2.1.4.1.7 | ColumnatmVpPMIntervalRxClp0 | read-only | current | The counter associated with the number of received CLP 0 cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.2.1.4.1.8 | ColumnatmVpPMIntervalErroredCells | read-only | current | The counter associated with the number of Errored cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.2.1.4.1.9 | ColumnatmVpPMIntervalLostCells | read-only | current | The counter associated with the number of Lost cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.2.1.4.1.10 | ColumnatmVpPMIntervalMisinsertedCells | read-only | current | The counter associated with the number of Misinserted cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.2.1.4.1.11 | ColumnatmVpPMIntervalECB | read-only | current | The counter associated with the number of ECBs encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.2.1.4.1.12 | ColumnatmVpPMIntervalSECB | read-only | current | The counter associated with the number of SECBs encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.2.1.4.1.13 | ColumnatmVpPMIntervalES | read-only | current | The counter associated with the number of Errored Seconds, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.2.1.4.1.14 | ColumnatmVpPMIntervalSES | read-only | current | The counter associated with the number of Severely Errored Seconds, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, interva… |
| 1.3.6.1.4.1.164.12.2.1.2.1.4.1.15 | ColumnatmVpPMIntervalUAS | read-only | current | The counter associated with the number of Unavailable Seconds, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.2.1.4.1.16 | ColumnatmVpPMIntervalQuality | read-only | current | If the number of errors per interval is superior to the atmNteUPLTCR value, the quality of service of the interval is declared as unacceptable. |
| 1.3.6.1.4.1.164.12.2.1.2.1.4.1.17 | ColumnatmVpPMIntervalLastDayQuality | read-only | current | If the number of errors per 24 hours is superior to the atmNteDPLTCR value, the quality of service of the day is declared as degraded. |
| 1.3.6.1.4.1.164.12.2.1.2.1.5 | TableatmVpQoSTable | not-accessible | current | The VP QoS table. |
| 1.3.6.1.4.1.164.12.2.1.2.1.5.1 | RowatmVpQoSEntry | not-accessible | current | . |
| 1.3.6.1.4.1.164.12.2.1.2.1.5.1.1 | ColumnatmVpQoSPeriodRef | read-only | current | This object is an index that specifies which period of time, the next 2 objects refer to. currentPeriod - the period since last systemResetAllStatsCmd received… |
| 1.3.6.1.4.1.164.12.2.1.2.1.5.1.2 | ColumnatmVpQoSElapsedTime | read-only | current | Elapsed Time in seconds. - for atmVpQoSPeriodRef = currentPeriod: The period since last systemResetAllStatsCmd received or since Start-up (if no systemResetAll… |
| 1.3.6.1.4.1.164.12.2.1.2.1.5.1.3 | ColumnatmVpQoSUAS | read-only | current | Number of Unavailable Seconds for the reference period (atmVpQoSPeriodRef). |
| 1.3.6.1.4.1.164.12.2.1.2.1.6 | TableatmVpPMQoSTable | not-accessible | current | The PM VP QoS table. |
| 1.3.6.1.4.1.164.12.2.1.2.1.6.1 | RowatmVpPMQoSEntry | not-accessible | current | . |
| 1.3.6.1.4.1.164.12.2.1.2.1.6.1.1 | ColumnatmVpPMQoSDirection | read-only | current | The direction of performance management. |
| 1.3.6.1.4.1.164.12.2.1.2.1.6.1.2 | ColumnatmVpPMQoSPeriodRef | read-only | current | This object is an index that specifies which period of time, the next 5 objects refer to. currentPeriod - the period since last systemResetAllStatsCmd received… |
| 1.3.6.1.4.1.164.12.2.1.2.1.6.1.3 | ColumnatmVpPMQoSCLR | read-only | current | Cell Loss Ratio counter for the reference period (atmVpPMQoSPeriodRef)- defined in accordance with I.356 , in %. The value will be multipuled by 100. |
| 1.3.6.1.4.1.164.12.2.1.2.1.6.1.4 | ColumnatmVpPMQoSCER | read-only | current | Cell Error Ratio counter for the reference period (atmVpPMQoSPeriodRef) defined in accordance with I.356 , in %. The value will be multipuled by 100. |
| 1.3.6.1.4.1.164.12.2.1.2.1.6.1.5 | ColumnatmVpPMQoSCMR | read-only | current | Cell Misinsertion Ratio counter for the reference period (atmVpPMQoSPeriodRef) defined in accordance with I.356 , cells/sec . |
| 1.3.6.1.4.1.164.12.2.1.2.1.7 | TableatmVpShaperStatTable | not-accessible | current | The ATM VP shaper statistics table. |
| 1.3.6.1.4.1.164.12.2.1.2.1.7.1 | RowatmVpShaperStatEntry | not-accessible | current | An entry in the ATM VP shaper statistics table. |
| 1.3.6.1.4.1.164.12.2.1.2.1.7.1.1 | ColumnatmVpShaperDiscarded | read-only | current | The number of Cells that were discarded in the shaper on that VPC due to buffer overflow. This counter counts till it reaches its MAX value (20 bits) and then … |
| 1.3.6.1.4.1.164.12.2.1.2.1.7.1.2 | ColumnatmVpShaperOccupation | read-only | current | The number of Cells that are currently stored in the buffer. This parameter is limited to 20 bits. |
| 1.3.6.1.4.1.164.12.2.1.2.1.7.1.3 | ColumnatmVpShaperMaxOccupation | read-only | current | The Maximum number of Cells that were stored in the buffer, since this VP was activated. This parameter is limited to 20 bits. |
| 1.3.6.1.4.1.164.12.2.1.2.1.7.1.4 | ColumnatmVpShaperLevel | read-only | current | The occupation of the buffer according to a predefined threshold. empty - buffer is Empty full - buffer is Full below - buffer is Below the threshold above - b… |
| 1.3.6.1.4.1.164.12.2.1.2.1.7.1.5 | ColumnatmVpShaperEpdDropped | read-only | current | The number of Cells that were dropped in the shaper on that VPC due to EPD\PPD mechanism in the last second. This parameter is limited to 24 bits. Applicable f… |
| 1.3.6.1.4.1.164.12.2.1.2.1.7.1.6 | ColumnatmVpShaperTotalEpdDropped | read-only | current | The Total number of Cells that were dropped in the shaper on that VPC due to EPD\PPD mechanism in the last 15 minutes. This counter automatically reset itself … |
| 1.3.6.1.4.1.164.12.2.1.2.2 | NodeatmVcPerformance | |||
| 1.3.6.1.4.1.164.12.2.1.2.2.1 | TableatmVcCurrentTable | not-accessible | current | The ATM VC Current table. |
| 1.3.6.1.4.1.164.12.2.1.2.2.1.1 | RowatmVcCurrentEntry | not-accessible | current | An entry in the ATM VC Current table. |
| 1.3.6.1.4.1.164.12.2.1.2.2.1.1.1 | ColumnatmVcCurrentVpi | read-only | current | The VPI of the VCL. |
| 1.3.6.1.4.1.164.12.2.1.2.2.1.1.2 | ColumnatmVcCurrentVci | read-only | current | The VCI of the VCL. |
| 1.3.6.1.4.1.164.12.2.1.2.2.1.1.3 | ColumnatmVcCurrentRxCellsClp01 | read-only | current | The counter associated with the number of transmitted cells, encountered by the VCL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.2.1.1.4 | ColumnatmVcCurrentRxCellsClp0 | read-only | current | The counter associated with the number of received cells, encountered by the VCL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.2.1.1.5 | ColumnatmVcCurrentGcra0Violations | read-only | current | The counter associated with the number of cells violating GCRA0, encountered by the VCL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.2.1.1.6 | ColumnatmVcCurrentGcra1Violations | read-only | current | The counter associated with the number of cells violating GCRA1, encountered by the VCL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.2.1.1.7 | ColumnatmVcCurrentRxAIS | read-only | current | The counter associated with the number of received AIS cells, encountered by the VCL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.2.1.1.8 | ColumnatmVcCurrentTxAIS | read-only | current | The counter associated with the number of transmitted AIS cells, encountered by the VCL of this ATM interface in the current 15 minute interval. Not Supported … |
| 1.3.6.1.4.1.164.12.2.1.2.2.1.1.9 | ColumnatmVcCurrentRxRDI | read-only | current | The counter associated with the number of received RDI cells, encountered by the VCL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.2.1.1.10 | ColumnatmVcCurrentTxRDI | read-only | current | The counter associated with the number of transmitted RDI cells, encountered by the VCL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.2.1.1.11 | ColumnatmVcCurrentContinuityLoss | read-only | current | The counter associated with the number of loss of continuity cells, encountered by the VCL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.2.1.1.12 | ColumnatmVcCurrentUAS | read-only | current | The counter associated with the number of Unavailable Seconds, encountered by the VCL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.2.1.1.13 | ColumnatmVcCurrentSES | read-only | current | The counter associated with the number of Severerly Errored Seconds, encountered by the VCL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.2.1.1.14 | ColumnatmVcCurrentCDC | read-only | current | Amount of cells dropped in the current 15 minute interval of the VC connection. |
| 1.3.6.1.4.1.164.12.2.1.2.2.1.1.15 | ColumnatmVcCurrentTotalDiscards | read-only | current | The total number of valid ATM cells discarded by the traffic policing entity. This includes cells originally received with CLP=0 and CLP=1. |
| 1.3.6.1.4.1.164.12.2.1.2.2.1.1.16 | ColumnatmVcCurrentClp0Discards | read-only | current | The total number of valid ATM cells received with CLP=0 an discarded by the traffic policing entity. |
| 1.3.6.1.4.1.164.12.2.1.2.2.1.1.17 | ColumnatmVcCurrentTotalCellOuts | read-only | current | The total number of valid ATM cells transmitted by this VPL. This includes both CLP=0 and CLP=1 cells. |
| 1.3.6.1.4.1.164.12.2.1.2.2.1.1.18 | ColumnatmVcCurrentClp0CellOuts | read-only | current | The total number of valid ATM cells transmitted with CLP=0 by this VPL. |
| 1.3.6.1.4.1.164.12.2.1.2.2.1.1.19 | ColumnatmVcCurrentTaggedOuts | read-only | current | The total number of valid ATM cells tagged by the traffic policing entity from CLP=0 to CLP=1 and transmitted by this VPL. |
| 1.3.6.1.4.1.164.12.2.1.2.2.1.1.20 | ColumnatmVcCurrentPCR | read-only | current | The maximum traffic rate encountered in the last interval of the VC connection (monitored once a second). |
| 1.3.6.1.4.1.164.12.2.1.2.2.1.1.21 | ColumnatmVcCurrentSCR | read-only | current | The average traffic rate during the last interval of the VC connection. |
| 1.3.6.1.4.1.164.12.2.1.2.2.1.1.22 | ColumnatmVcCurrentMCR | read-only | current | MCR - The minimum traffic rate encountered in the last interval of the VC connection (monitored once a second). |
| 1.3.6.1.4.1.164.12.2.1.2.2.1.1.23 | ColumnatmVcCurrentShaperTotalDiscards | read-only | current | The total number of cells (CLP0 and CLP1) discarded due to congestion by the traffic shaper. |
| 1.3.6.1.4.1.164.12.2.1.2.2.1.1.24 | ColumnatmVcCurrentShaperClp0Discards | read-only | current | The total number of CLP0 cells discarded due to congestion by the traffic shaper. |
| 1.3.6.1.4.1.164.12.2.1.2.2.1.1.25 | ColumnatmVcCurrentShaperClp1Discards | read-only | current | The total number of CLP1 cells discarded due to congestion by the traffic shaper. |
| 1.3.6.1.4.1.164.12.2.1.2.2.2 | TableatmVcPMCurrentTable | not-accessible | current | The ATM VC Current table for Performance Management. |
| 1.3.6.1.4.1.164.12.2.1.2.2.2.1 | RowatmVcPMCurrentEntry | not-accessible | current | An entry in the ATM VC Current table for Performance Management. |
| 1.3.6.1.4.1.164.12.2.1.2.2.2.1.1 | ColumnatmVcPMCurrentVpi | read-only | current | The VPI of the VCL. |
| 1.3.6.1.4.1.164.12.2.1.2.2.2.1.2 | ColumnatmVcPMCurrentVci | read-only | current | The VCI of the VCL. |
| 1.3.6.1.4.1.164.12.2.1.2.2.2.1.3 | ColumnatmVcPMCurrentDir | read-only | current | The direction of Performance Management. |
| 1.3.6.1.4.1.164.12.2.1.2.2.2.1.4 | ColumnatmVcPMCurrentTxClp01 | read-only | current | The counter associated with the number of transmitted CLP 0+1 cells, encountered by the VCL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.2.2.1.5 | ColumnatmVcPMCurrentTxClp0 | read-only | current | The counter associated with the number of transmitted CLP 0 cells, encountered by the VCL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.2.2.1.6 | ColumnatmVcPMCurrentRxClp01 | read-only | current | The counter associated with the number of received CLP 0+1 cells, encountered by the VCL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.2.2.1.7 | ColumnatmVcPMCurrentRxClp0 | read-only | current | The counter associated with the number of received CLP 0 cells, encountered by the VCL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.2.2.1.8 | ColumnatmVcPMCurrentErroredCells | read-only | current | The counter associated with the number of errored cells, encountered by the VCL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.2.2.1.9 | ColumnatmVcPMCurrentLostCells | read-only | current | The counter associated with the number of lost cells, encountered by the VCL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.2.2.1.10 | ColumnatmVcPMCurrentMisinsertedCells | read-only | current | The counter associated with the number of misinserted cells, encountered by the VCL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.2.2.1.11 | ColumnatmVcPMCurrentECB | read-only | current | The counter associated with the number of ECBs encountered by the VCL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.2.2.1.12 | ColumnatmVcPMCurrentSECB | read-only | current | The counter associated with the number of SECBs encountered by the VCL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.2.2.1.13 | ColumnatmVcPMCurrentES | read-only | current | The counter associated with the number of Errored Seconds, encountered by the VCL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.2.2.1.14 | ColumnatmVcPMCurrentSES | read-only | current | The counter associated with the number of Severely Errored Seconds, encountered by the VCL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.2.2.1.15 | ColumnatmVcPMCurrentUAS | read-only | current | The counter associated with the number of Severely Errored Seconds, encountered by the VCL of this ATM interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.2.2.2.1.16 | ColumnatmVcPMCurrentIntervalQuality | read-only | current | If the number of errors per interval is superior to the atmNteUPLTCR value, the quality of service of the interval is declared as unacceptable. |
| 1.3.6.1.4.1.164.12.2.1.2.2.2.1.17 | ColumnatmVcPMCurrentLastDayQuality | read-only | current | If the number of errors per 24 hours is superior to the atmNteDPLTCR value, the quality of service of the day is declared as degraded. |
| 1.3.6.1.4.1.164.12.2.1.2.2.3 | TableatmVcIntervalTable | not-accessible | current | The ATM Vc Interval table. |
| 1.3.6.1.4.1.164.12.2.1.2.2.3.1 | RowatmVcIntervalEntry | not-accessible | current | An entry in the ATM Vc Interval table. |
| 1.3.6.1.4.1.164.12.2.1.2.2.3.1.1 | ColumnatmVcIntervalVpi | read-only | current | The VPI of the VCL. |
| 1.3.6.1.4.1.164.12.2.1.2.2.3.1.2 | ColumnatmVcIntervalVci | read-only | current | The VCI of the VCL. |
| 1.3.6.1.4.1.164.12.2.1.2.2.3.1.3 | ColumnatmVcIntervalNumber | read-only | current | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that … |
| 1.3.6.1.4.1.164.12.2.1.2.2.3.1.4 | ColumnatmVcIntervalRxCellsClp01 | read-only | current | The counter associated with the number of transmitted cells , encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.2.2.3.1.5 | ColumnatmVcIntervalRxCellsClp0 | read-only | current | The counter associated with the number of received cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.2.2.3.1.6 | ColumnatmVcIntervalGcra0Violations | read-only | current | The counter associated with the number of cells violating GCRA0, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.2.2.3.1.7 | ColumnatmVcIntervalGcra1Violations | read-only | current | The counter associated with the number of cells violating GCRA1, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.2.2.3.1.8 | ColumnatmVcIntervalRxAIS | read-only | current | The counter associated with the number of received AIS cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.2.2.3.1.9 | ColumnatmVcIntervalTxAIS | read-only | current | The counter associated with the number of transmitted AIS cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.… |
| 1.3.6.1.4.1.164.12.2.1.2.2.3.1.10 | ColumnatmVcIntervalRxRDI | read-only | current | The counter associated with the number of received RDI cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.2.2.3.1.11 | ColumnatmVcIntervalTxRDI | read-only | current | The counter associated with the number of transmitted RDI cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.2.2.3.1.12 | ColumnatmVcIntervalContinuityLoss | read-only | current | The counter associated with the number of Continuity Loss cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.2.2.3.1.13 | ColumnatmVcIntervalUAS | read-only | current | The counter associated with the number of Unavailable Seconds, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.2.2.3.1.14 | ColumnatmVcIntervalSES | read-only | current | The counter associated with the number of Severerly Errored Seconds, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, interv… |
| 1.3.6.1.4.1.164.12.2.1.2.2.3.1.15 | ColumnatmVcIntervalCDC | read-only | current | Amount of cells dropped in the 15 minute interval of the VC connection. |
| 1.3.6.1.4.1.164.12.2.1.2.2.3.1.16 | ColumnatmVcIntervalTotalDiscards | read-only | current | The total number of valid ATM cells discarded by the traffic policing entity. This includes cells originally received with CLP=0 and CLP=1. |
| 1.3.6.1.4.1.164.12.2.1.2.2.3.1.17 | ColumnatmVcIntervalClp0Discards | read-only | current | The total number of valid ATM cells received with CLP=0 an discarded by the traffic policing entity. |
| 1.3.6.1.4.1.164.12.2.1.2.2.3.1.18 | ColumnatmVcIntervalTotalCellOuts | read-only | current | The total number of valid ATM cells transmitted by this VPL. This includes both CLP=0 and CLP=1 cells. |
| 1.3.6.1.4.1.164.12.2.1.2.2.3.1.19 | ColumnatmVcIntervalClp0CellOuts | read-only | current | The total number of valid ATM cells transmitted with CLP=0 by this VPL. |
| 1.3.6.1.4.1.164.12.2.1.2.2.3.1.20 | ColumnatmVcIntervalTaggedOuts | read-only | current | The total number of valid ATM cells tagged by the traffic policing entity from CLP=0 to CLP=1 and transmitted by this VPL. |
| 1.3.6.1.4.1.164.12.2.1.2.2.3.1.21 | ColumnatmVcIntervalPCR | read-only | current | The maximum traffic rate encountered in the last interval of the VC connection (monitored once a second) encountered by an ATM interface/VC in one of the previ… |
| 1.3.6.1.4.1.164.12.2.1.2.2.3.1.22 | ColumnatmVcIntervalSCR | read-only | current | The average traffic rate during the last interval of the VC connection, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, int… |
| 1.3.6.1.4.1.164.12.2.1.2.2.3.1.23 | ColumnatmVcIntervalMCR | read-only | current | MCR - The minimum traffic rate encountered in the last interval of the VC connection (monitored once a second) encountered by an ATM interface/VC in one of the… |
| 1.3.6.1.4.1.164.12.2.1.2.2.3.1.24 | ColumnatmVcIntervalShaperTotalDiscards | read-only | current | The total number of cells (CLP0 and CLP1) discarded due to congestion by the traffic shaper. |
| 1.3.6.1.4.1.164.12.2.1.2.2.3.1.25 | ColumnatmVcIntervalShaperClp0Discards | read-only | current | The total number of CLP0 cells discarded due to congestion by the traffic shaper. |
| 1.3.6.1.4.1.164.12.2.1.2.2.3.1.26 | ColumnatmVcIntervalShaperClp1Discards | read-only | current | The total number of CLP1 cells discarded due to congestion by the traffic shaper. |
| 1.3.6.1.4.1.164.12.2.1.2.2.4 | TableatmVcPMIntervalTable | not-accessible | current | The ATM Vc Interval table for Performance Management. |
| 1.3.6.1.4.1.164.12.2.1.2.2.4.1 | RowatmVcPMIntervalEntry | not-accessible | current | An entry in the ATM Vc Interval table for Performance Management. |
| 1.3.6.1.4.1.164.12.2.1.2.2.4.1.1 | ColumnatmVcPMIntervalVpi | read-only | current | The VPI of the VCL. |
| 1.3.6.1.4.1.164.12.2.1.2.2.4.1.2 | ColumnatmVcPMIntervalVci | read-only | current | The VCI of the VCL. |
| 1.3.6.1.4.1.164.12.2.1.2.2.4.1.3 | ColumnatmVcPMIntervalDir | read-only | current | The direction of Performance Management. |
| 1.3.6.1.4.1.164.12.2.1.2.2.4.1.4 | ColumnatmVcPMIntervalNumber | read-only | current | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that … |
| 1.3.6.1.4.1.164.12.2.1.2.2.4.1.5 | ColumnatmVcPMIntervalTxClp01 | read-only | current | The counter associated with the number of transmitted CLP 0+1 cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, interv… |
| 1.3.6.1.4.1.164.12.2.1.2.2.4.1.6 | ColumnatmVcPMIntervalTxClp0 | read-only | current | The counter associated with the number of transmitted CLP 0 cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, interval… |
| 1.3.6.1.4.1.164.12.2.1.2.2.4.1.7 | ColumnatmVcPMIntervalRxClp01 | read-only | current | The counter associated with the number of received CLP 0+1 cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.2.2.4.1.8 | ColumnatmVcPMIntervalRxClp0 | read-only | current | The counter associated with the number of received CLP 0 cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.2.2.4.1.9 | ColumnatmVcPMIntervalErroredCells | read-only | current | The counter associated with the number of Errored cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.2.2.4.1.10 | ColumnatmVcPMIntervalLostCells | read-only | current | The counter associated with the number of Lost cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.2.2.4.1.11 | ColumnatmVcPMIntervalMisinsertedCells | read-only | current | The counter associated with the number of Misinserted cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.2.2.4.1.12 | ColumnatmVcPMIntervalECB | read-only | current | The counter associated with the number of ECBs encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.2.2.4.1.13 | ColumnatmVcPMIntervalSECB | read-only | current | The counter associated with the number of SECBs encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.2.2.4.1.14 | ColumnatmVcPMIntervalES | read-only | current | The counter associated with the number of Errored Seconds, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.2.2.4.1.15 | ColumnatmVcPMIntervalSES | read-only | current | The counter associated with the number of Severely Errored Seconds, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, interva… |
| 1.3.6.1.4.1.164.12.2.1.2.2.4.1.16 | ColumnatmVcPMIntervalUAS | read-only | current | The counter associated with the number of Unavailable Seconds, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.2.2.4.1.17 | ColumnatmVcPMIntervalQuality | read-only | current | If the number of errors per interval is superior to the atmNteUPLTCR value, the quality of service of the interval is declared as unacceptable. |
| 1.3.6.1.4.1.164.12.2.1.2.2.4.1.18 | ColumnatmVcPMIntervalLastDayQuality | read-only | current | If the number of errors per 24 hours is superior to the atmNteDPLTCR value, the quality of service of the day is declared as degraded. |
| 1.3.6.1.4.1.164.12.2.1.2.2.5 | TableatmCESAAL1StatsTable | not-accessible | current | This table shows statistics of the structured Circuit-Emulation connections. |
| 1.3.6.1.4.1.164.12.2.1.2.2.5.1 | RowatmCESAAL1StatsEntry | not-accessible | current | defines an entry in the atmCESAAL1StatsTable |
| 1.3.6.1.4.1.164.12.2.1.2.2.5.1.1 | ColumnatmCESAAL1SeqErrors | read-only | current | number of cells discarded due to wrong sequence number |
| 1.3.6.1.4.1.164.12.2.1.2.2.5.1.2 | ColumnatmCESAAL1HdrErrors | read-only | current | number of cells discarded due to bad AAL1 header error. this include correctable and uncorrectable CRC, plus bad parity. |
| 1.3.6.1.4.1.164.12.2.1.2.2.5.1.3 | ColumnatmCESAAL1PointerReframes | read-only | current | number of events in which the AAL1 reassembler found that an SDT pointer isn't where it is expected, and the pointer must be reacquired. |
| 1.3.6.1.4.1.164.12.2.1.2.2.5.1.4 | ColumnatmCESAAL1BufUnderflows | read-only | current | number of buffer underflows events. |
| 1.3.6.1.4.1.164.12.2.1.2.2.5.1.5 | ColumnatmCESAAL1BufOverflows | read-only | current | number of buffer overflows events. |
| 1.3.6.1.4.1.164.12.2.1.2.2.6 | TableatmVcQoSTable | not-accessible | current | The ATM VP QoS table. |
| 1.3.6.1.4.1.164.12.2.1.2.2.6.1 | RowatmVcQoSEntry | not-accessible | current | An entry in the ATM VP table. |
| 1.3.6.1.4.1.164.12.2.1.2.2.6.1.1 | ColumnatmVcQoSPeriodRef | read-only | current | This object is an index that specifies which period of time, the next 2 objects refer to. currentPeriod - the period since last systemResetAllStatsCmd received… |
| 1.3.6.1.4.1.164.12.2.1.2.2.6.1.2 | ColumnatmVcQoSElapsedTime | read-only | current | Elapsed Time in seconds. - for atmVcQoSPeriodRef = currentPeriod: The period since last systemResetAllStatsCmd received or since Start-up (if no systemResetAll… |
| 1.3.6.1.4.1.164.12.2.1.2.2.6.1.3 | ColumnatmVcQoSUAS | read-only | current | Number of Unavailable Seconds for the reference period (atmVcQoSPeriodRef). |
| 1.3.6.1.4.1.164.12.2.1.2.2.7 | TableatmVcPMQoSTable | not-accessible | current | The PM VC QoS table. |
| 1.3.6.1.4.1.164.12.2.1.2.2.7.1 | RowatmVcPMQoSEntry | not-accessible | current | An entry in the VC PM QoS table. |
| 1.3.6.1.4.1.164.12.2.1.2.2.7.1.1 | ColumnatmVcPMQoSDirection | read-only | current | The direction of performance management. |
| 1.3.6.1.4.1.164.12.2.1.2.2.7.1.2 | ColumnatmVcPMQoSPeriodRef | read-only | current | This object is an index that specifies which period of time, the next 5 objects refer to. currentPeriod - the period since last systemResetAllStatsCmd received… |
| 1.3.6.1.4.1.164.12.2.1.2.2.7.1.3 | ColumnatmVcPMQoSCLR | read-only | current | Cell Loss Ratio counter for the reference period (atmVcPMQoSPeriodRef)- defined in accordance with I.356 , in %. The value will be multipuled by 100. |
| 1.3.6.1.4.1.164.12.2.1.2.2.7.1.4 | ColumnatmVcPMQoSCER | read-only | current | Cell Error Ratio counter for the reference period (atmVcPMQoSPeriodRef) defined in accordance with I.356 , in %. The value will be multipuled by 100. |
| 1.3.6.1.4.1.164.12.2.1.2.2.7.1.5 | ColumnatmVcPMQoSCMR | read-only | current | Cell Miss-insertion Ratio counter for the reference period (atmVcPMQoSPeriodRef) defined in accordance with I.356 , cells/sec . |
| 1.3.6.1.4.1.164.12.2.1.2.2.8 | TableatmVcShaperStatTable | not-accessible | current | The ATM VC shaper statistics table. |
| 1.3.6.1.4.1.164.12.2.1.2.2.8.1 | RowatmVcShaperStatEntry | not-accessible | current | An entry in the ATM VC shaper statistics table. |
| 1.3.6.1.4.1.164.12.2.1.2.2.8.1.1 | ColumnatmVcShaperDiscarded | read-only | current | The number of Cells that were discarded in the shaper on that VCC due to buffer overflow. This counter counts till it reaches its MAX value (20 bits) and then … |
| 1.3.6.1.4.1.164.12.2.1.2.2.8.1.2 | ColumnatmVcShaperOccupation | read-only | current | The number of Cells that are currently stored in the buffer. This parameter is limited to 20 bits. |
| 1.3.6.1.4.1.164.12.2.1.2.2.8.1.3 | ColumnatmVcShaperMaxOccupation | read-only | current | The Maximum number of Cells that were stored in the buffer, since this VC was activated. This parameter is limited to 20 bits. |
| 1.3.6.1.4.1.164.12.2.1.2.2.8.1.4 | ColumnatmVcShaperLevel | read-only | current | The occupation of the buffer according to a predefined threshold. empty - buffer is Empty full - buffer is Full below - buffer is Below the threshold above - b… |
| 1.3.6.1.4.1.164.12.2.1.2.2.8.1.5 | ColumnatmVcShaperEpdDropped | read-only | current | The number of Cells that were dropped in the shaper on that VCC due to EPD\PPD mechanism in the last second. This parameter is limited to 24 bits. Applicable f… |
| 1.3.6.1.4.1.164.12.2.1.2.2.8.1.6 | ColumnatmVcShaperTotalEpdDropped | read-only | current | The Total number of Cells that were dropped in the shaper on that VPC due to EPD\PPD mechanism in the last 15 minutes. This counter automatically reset itself … |
| 1.3.6.1.4.1.164.12.2.1.3 | TableatmIntervalDateTable | not-accessible | current | The agent will keep in this group the date & time corresponding to each interval. |
| 1.3.6.1.4.1.164.12.2.1.3.1 | RowatmIntervalDateEntry | not-accessible | current | The date & time for the given interval. |
| 1.3.6.1.4.1.164.12.2.1.3.1.1 | ColumnatmIntervalDateInterval | read-only | current | The interval number defining this entry. |
| 1.3.6.1.4.1.164.12.2.1.3.1.2 | ColumnatmIntervalDateDate | read-only | current | The date corresponding to this interval. |
| 1.3.6.1.4.1.164.12.2.1.3.1.3 | ColumnatmIntervalDateTime | read-only | current | The time corresponding to this interval. |
| 1.3.6.1.4.1.164.12.2.2 | NodeatmGenSystem | |||
| 1.3.6.1.4.1.164.12.2.2.1 | NodeatmGenSysGen | |||
| 1.3.6.1.4.1.164.12.2.2.1.1 | TableatmGenSysSelfTestTable | not-accessible | current | A table containing the results of the initial testing of the device. |
| 1.3.6.1.4.1.164.12.2.2.1.1.1 | RowatmGenSysSelfTestEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.12.2.2.1.1.1.1 | ColumnatmGenSysSelfTestIndex | read-only | current | A running index for the table. |
| 1.3.6.1.4.1.164.12.2.2.1.1.1.2 | ColumnatmGenSysSelfTestResult | read-only | current | The results of the initial testing of the device. |
| 1.3.6.1.4.1.164.12.2.2.1.1.1.3 | ColumnatmGenSysSelfTestModule | read-only | current | The name of module on which the test was performed. |
| 1.3.6.1.4.1.164.12.2.2.1.2 | ScalaratmGenSysLogClearAll | read-write | current | Setting the variable to clear(3) removes all entries in the Log Buffer of the agent. The agent will immediately reset the variable to off(2). |
| 1.3.6.1.4.1.164.12.2.2.1.3 | TableatmGenSysLogTable | not-accessible | current | A copy of the log buffer. |
| 1.3.6.1.4.1.164.12.2.2.1.3.1 | RowatmGenSysLogEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.12.2.2.1.3.1.1 | ColumnatmGenSysLogIndex | read-only | current | The index of the log buffer. |
| 1.3.6.1.4.1.164.12.2.2.1.3.1.2 | ColumnatmGenSysLogMessage | read-only | current | The log buffer entry message text. |
| 1.3.6.1.4.1.164.12.2.2.1.4 | ScalaratmGenSysSetDefaultConfg | read-write | current | When set to on(3), the agent will set all the configuration parameters to their default values. The variable is then reset to off(2) by the agent. The agent mu… |
| 1.3.6.1.4.1.164.12.2.2.1.5 | TableatmGenSysCxRefTable | not-accessible | current | A Cross Reference table. The table maintains an index of an object which is also the table index, and a counter that indicates how many times this object was r… |
| 1.3.6.1.4.1.164.12.2.2.1.5.1 | RowatmGenSysCxRefEntry | not-accessible | current | The entries will be added by the agent upon an entry addition in the referenced tables (TD table, FR Descriptor etc.) |
| 1.3.6.1.4.1.164.12.2.2.1.5.1.1 | ColumnatmGenSysCxRefIndex | read-only | current | The index specifies an entry in the table of the object. |
| 1.3.6.1.4.1.164.12.2.2.1.5.1.2 | ColumnatmGenSysCxRefCounter | read-only | current | The counter counts the number of references that have been made to the object . |
| 1.3.6.1.4.1.164.12.3 | NodeatmNte | |||
| 1.3.6.1.4.1.164.12.3.0 | IdentityatmNteEvents | current | The events for RAD ATM products. | |
| 1.3.6.1.4.1.164.12.3.0.1 | NotificationatmAceStatusChange | current | The trap is sent every time there is a change in the state of one of the LEDs. | |
| 1.3.6.1.4.1.164.12.3.0.2 | NotificationatmAceAlarmTrap | current | The trap is sent whenever there is a transition from a no alarm state to a state with at least one active alarm. An active alarm state exists if: 1) The atmInt… | |
| 1.3.6.1.4.1.164.12.3.0.3 | NotificationatmAceModuleChangeTrap | current | The trap is sent every time a module is changed (Hot swapping). The second variable will be atmNteCardType to indicate the type of card that was inserted. The … | |
| 1.3.6.1.4.1.164.12.3.0.4 | NotificationatmAceRedundancyTrap | current | The trap is sent upon change in link as a result of redundancy. The ifIndex parameter indicates the current active link. | |
| 1.3.6.1.4.1.164.12.3.0.5 | NotificationatmAceModuleMismatchTrap | current | The trap is sent upon starting or stopping of a module mismatch state. A possible mismatch is when the inserted module is other than the programmed one. | |
| 1.3.6.1.4.1.164.12.3.1 | NodeatmNteSys | |||
| 1.3.6.1.4.1.164.12.3.1.1 | NodeatmNteSysConfig | |||
| 1.3.6.1.4.1.164.12.3.1.1.1 | TableatmNteManagerTable | not-accessible | current | The Manager Table includes all the NMSs that receive traps from this agent. A single manager can receive traps on more than one PVC. The agent will set implici… |
| 1.3.6.1.4.1.164.12.3.1.1.1.1 | RowatmNteManagerEntry | not-accessible | current | A single manager and the PVC for receiving traps. |
| 1.3.6.1.4.1.164.12.3.1.1.1.1.1 | ColumnatmNteManagerIP | read-only | current | The IP address of the NMS. |
| 1.3.6.1.4.1.164.12.3.1.1.1.1.2 | ColumnatmNteManagerPvc | read-only | current | A PVC index. The range is 1..8. There are four PVCs on the User Port and four PVCs on the Network Port. The default VPI, VCI values are specified below. |
| 1.3.6.1.4.1.164.12.3.1.1.1.1.3 | ColumnatmNteManagerIfIndex | read-create | current | The ATM interface index of the management port. |
| 1.3.6.1.4.1.164.12.3.1.1.1.1.4 | ColumnatmNteManagerVpi | read-create | current | The VPI of the management VCL. Default: 0. |
| 1.3.6.1.4.1.164.12.3.1.1.1.1.5 | ColumnatmNteManagerVci | read-create | current | The VCI of the management VCL. Defaults: 32,33,34,35. |
| 1.3.6.1.4.1.164.12.3.1.1.1.1.6 | ColumnatmNteManagerTrapMask | read-create | current | The value of this attribute determines the type of traps the agent should mask and not send to this NMS. The value is differently determined for different prod… |
| 1.3.6.1.4.1.164.12.3.1.1.1.1.7 | ColumnatmNteManagerRowStatus | read-create | current | Creation/Deletion of rows in the table. |
| 1.3.6.1.4.1.164.12.3.1.1.1.1.8 | ColumnatmNteManagerNextHop | read-create | current | This parameter is relevant to Ethernet out of band host only (PVC=10). The Next Hop IP address of the entry route. |
| 1.3.6.1.4.1.164.12.3.1.1.1.1.9 | ColumnatmNteManagerVlanSupport | read-create | current | VLAN support (Tagging). no - No support to VLAN. yes - 4 VLAN bytes will be added to the frame. |
| 1.3.6.1.4.1.164.12.3.1.1.1.1.10 | ColumnatmNteManagerVlanIdentifier | read-create | current | VLAN ID. Range is 0..4095. |
| 1.3.6.1.4.1.164.12.3.1.1.1.1.11 | ColumnatmNteManagerVlanFramePriority | read-create | current | VLAN Frame priority.Range is 0..7. |
| 1.3.6.1.4.1.164.12.3.1.1.1.1.12 | ColumnatmNteManagerAlarmTrapMask | read-create | current | The value of this object determines the alarm traps that the agent should mask and not send to this NMS. The value is an Octet String, where each bit is assign… |
| 1.3.6.1.4.1.164.12.3.1.1.1.1.13 | ColumnatmNteManagerConfigPorts | read-create | current | This variable defines from which port/s this manager can configure the device. For IPmux 11 the value of this variable will be according to the ports combinati… |
| 1.3.6.1.4.1.164.12.3.1.1.2 | ScalaratmNteUPLTCR | read-write | current | The Unacceptable ES Limit threshold for Performance Management. |
| 1.3.6.1.4.1.164.12.3.1.1.3 | ScalaratmNteDPLTCR | read-write | current | The Degraded ES Limit threshold for Performance Management. |
| 1.3.6.1.4.1.164.12.3.1.1.4 | ScalaratmNteSysLogClearAll | read-write | current | Setting the variable to clear(3) removes all entries in the Log Buffer of the agent. The agent will immediately reset the variable to off(2). |
| 1.3.6.1.4.1.164.12.3.1.1.5 | ScalaratmNteUSESLTCR | read-write | current | The Unacceptable SES Limit threshold for Performance Management. |
| 1.3.6.1.4.1.164.12.3.1.1.6 | ScalaratmNteDSESLTCR | read-write | current | The Degraded ES Limit threshold for Performance Management. |
| 1.3.6.1.4.1.164.12.3.1.1.8 | NodeatmNteProtection | |||
| 1.3.6.1.4.1.164.12.3.1.1.8.1 | ScalaratmNteProtectionMode | read-write | current | Protection Mode. MspOn - Multiplex section protection. pathOn - High order path protection. mspUniOn - Multiplex section Uni-directional protection. mspOneToN … |
| 1.3.6.1.4.1.164.12.3.1.1.8.2 | ScalaratmNteProtectionWorkingLink | read-write | current | Selects the working link when atmNteProtectionMode is off. |
| 1.3.6.1.4.1.164.12.3.1.1.8.3 | ScalaratmNteProtectionSwitchLink | read-write | current | ForceSwitch - will force Switching from the working link to the backup link. Afterwards the agent will set atmNteProtectionSwitchLink back to off(1). atmNtePro… |
| 1.3.6.1.4.1.164.12.3.1.1.9 | NodeatmNteConfOam | |||
| 1.3.6.1.4.1.164.12.3.1.1.9.1 | ScalaratmNteConfOamSupport | read-write | current | OAM support mode, which determines the device location in a segment wise. |
| 1.3.6.1.4.1.164.12.3.1.1.9.2 | NodeatmNteConfOamTransmission | |||
| 1.3.6.1.4.1.164.12.3.1.1.9.2.1 | ScalaratmNteConfOamAIS | read-write | current | Defines if a F4 segment OAM cell is transmitted due to problems in the other port, i.e. physical layer alarm or F4 defect. This is valid only when the ACE101 h… |
| 1.3.6.1.4.1.164.12.3.1.1.9.2.2 | ScalaratmNteConfOamRDI | read-write | current | Defines if an F4 OAM RDI cell is transmitted due to physical layer problems in the port (in addition to F4 RDI cells transmitted due to ATM layer problems). Th… |
| 1.3.6.1.4.1.164.12.3.1.1.9.3 | NodeatmNteConfOamAddressing | |||
| 1.3.6.1.4.1.164.12.3.1.1.9.3.1 | ScalaratmNteConfLoopbackAddMode | read-write | current | Loopback addressing mode. on - will enable loopback addressing. off - will disable loopback addressing. |
| 1.3.6.1.4.1.164.12.3.1.1.9.3.2 | ScalaratmNteConfLoopbackSourceAdd | read-write | current | Loopback source address. This field is relevant when atmNteConfOamAddMode is on. |
| 1.3.6.1.4.1.164.12.3.1.1.9.4 | TableatmNteConfOamIfTable | not-accessible | current | OAM support per ATM interface. |
| 1.3.6.1.4.1.164.12.3.1.1.9.4.1 | RowatmNteConfOamIfEntry | not-accessible | current | . |
| 1.3.6.1.4.1.164.12.3.1.1.9.4.1.1 | ColumnatmNteConfOamIfAisRdi | read-write | current | This parameter controls the generation of F4/F5 AIS and RDI due to lower order problems such as physical layer problems. For AIS: Defines if F4/F5 AIS cell is … |
| 1.3.6.1.4.1.164.12.3.1.1.10 | NodeatmNteConfCAC | |||
| 1.3.6.1.4.1.164.12.3.1.1.10.1 | ScalaratmNteConfCACMode | read-write | current | CAC support mode. For ACE2002, the following are the applicable values: disable(1), enable(2), 10 - 1000. |
| 1.3.6.1.4.1.164.12.3.1.1.11 | TableatmNteHostIfTable | not-accessible | current | Host IP interface table. |
| 1.3.6.1.4.1.164.12.3.1.1.11.1 | RowatmNteHostIfEntry | not-accessible | current | . |
| 1.3.6.1.4.1.164.12.3.1.1.11.1.1 | ColumnatmNteHostPvcIndex | read-only | current | A PVC index. The range is 1..10. |
| 1.3.6.1.4.1.164.12.3.1.1.11.1.2 | ColumnatmNteHostIP | read-create | current | The host interface IP address. |
| 1.3.6.1.4.1.164.12.3.1.1.11.1.3 | ColumnatmNteHostMask | read-create | current | The host interface subnet mask. |
| 1.3.6.1.4.1.164.12.3.1.1.11.1.4 | ColumnatmNteHostAtmIfIndex | read-create | current | ATM interface index. Will be 1 for user port, and 2 for network port. |
| 1.3.6.1.4.1.164.12.3.1.1.11.1.5 | ColumnatmNteHostVpi | read-create | current | VPI of the PVC connected to that host interface. |
| 1.3.6.1.4.1.164.12.3.1.1.11.1.6 | ColumnatmNteHostVci | read-create | current | VCI of the PVC connected to that host interface. |
| 1.3.6.1.4.1.164.12.3.1.1.11.1.7 | ColumnatmNteHostRowStatus | read-create | current | Creation/Deletion of rows in the table. |
| 1.3.6.1.4.1.164.12.3.1.1.11.1.8 | ColumnatmNteHostRdnVpi | read-create | current | The VPI of the redundant management VCL. This parameter is applicable only if atmNteRdnManagement=enable(3). |
| 1.3.6.1.4.1.164.12.3.1.1.11.1.9 | ColumnatmNteHostRdnVci | read-create | current | The VCI of the redundant management VCL. This parameter is applicable only if atmNteRdnManagement=enable(3). |
| 1.3.6.1.4.1.164.12.3.1.1.11.1.10 | ColumnatmNteHostDefaultNextHop | read-create | current | The host interface Default Next Hop address. This address will be used as default next hop for every Bundle mapped to this Host. |
| 1.3.6.1.4.1.164.12.3.1.1.11.1.11 | ColumnatmNteHostVlanTagging | read-create | current | VLAN Tag support. no - No support to VLAN. yes - 4 VLAN bytes will be added to each frame connected to this Host. |
| 1.3.6.1.4.1.164.12.3.1.1.11.1.12 | ColumnatmNteHostDefaultVlanID | read-create | current | Default VLAN ID of this Host. |
| 1.3.6.1.4.1.164.12.3.1.1.11.1.13 | ColumnatmNteHostDefaultVlanPriority | read-create | current | Default VLAN priority for this Host. |
| 1.3.6.1.4.1.164.12.3.1.1.12 | ScalaratmNteShaperMode | read-write | current | Shaper Mode. vpInbandMng - Vcc within a Vp for management. |
| 1.3.6.1.4.1.164.12.3.1.1.13 | ScalaratmNteOutputRate | read-write | current | Aggregate shaping output rate in Cells per Seconds units. Default value is the Network port rate. |
| 1.3.6.1.4.1.164.12.3.1.1.14 | ScalaratmNteTosMode | read-write | current | TOS Mode. |
| 1.3.6.1.4.1.164.12.3.1.1.15 | ScalaratmNteTosMask | read-write | current | This parameter determines the seqence of bits that will be used for TOS. For ACE101 this parameter is applicable only if atmNteTosMode = enable. Valid only for… |
| 1.3.6.1.4.1.164.12.3.1.1.16 | ScalaratmNteTosHighPriority | read-write | current | Priorities options are High or Low. High priority will be represented by bit = 1. Low priority will be represented by bit = 0. Each TOS value will be represent… |
| 1.3.6.1.4.1.164.12.3.1.1.17 | ScalaratmNtePlugAndPlayActivity | read-write | current | Activity control for Manager Plug And Play. disable - disable the feature. offline - Automatic learn IP address into offline memory. online - Automatic learn I… |
| 1.3.6.1.4.1.164.12.3.1.1.18 | ScalaratmNteSlotUsage | read-write | current | Applicable to ace2002. Slot 2 might be configured as user slot or as network slot. |
| 1.3.6.1.4.1.164.12.3.1.1.19 | ScalaratmNteConnectionsMaxNumber | read-write | current | The MAX number of connections supported by system. Setting this parameter will affect the number of MAX intervals supported. This parameter will affect the sys… |
| 1.3.6.1.4.1.164.12.3.1.1.20 | ScalaratmNteDefaultVpi | read-write | current | Default Vpi for management. |
| 1.3.6.1.4.1.164.12.3.1.1.21 | ScalaratmNteDefaultVci | read-write | current | Default Vci for management. |
| 1.3.6.1.4.1.164.12.3.1.1.22 | ScalaratmNteReservedVpi | read-write | current | Internal use VPI, where shaperMode=vpInbandMng. |
| 1.3.6.1.4.1.164.12.3.1.1.23 | ScalaratmNteRdnManagement | read-only | current | The redundancy management status. |
| 1.3.6.1.4.1.164.12.3.1.1.24 | ScalaratmNtePlugAndPlayIfIndex | read-write | current | The ifIndex of the Plug and Play VCC. |
| 1.3.6.1.4.1.164.12.3.1.1.25 | ScalaratmNteLoopbackTimeout | read-write | current | The Loopback state timeout in minutes. A value of zero means no timeout (for ever). Default is 5 min. |
| 1.3.6.1.4.1.164.12.3.1.1.26 | TableatmNteOamTable | not-accessible | current | This table is a static table, which is created by agent once upon initialization. The created entries are actually, only the supported OAM features. This table… |
| 1.3.6.1.4.1.164.12.3.1.1.26.1 | RowatmNteOamEntry | not-accessible | current | An entry in the OAM table. Each entry in this table will indicate a special OAM. |
| 1.3.6.1.4.1.164.12.3.1.1.26.1.1 | ColumnatmNteOamMode | read-only | current | The OAM cell path. endToEnd(1) - the entire path. |
| 1.3.6.1.4.1.164.12.3.1.1.26.1.2 | ColumnatmNteOamCellType | read-only | current | This object indicates a unique Indication Signal. aisAndRdi(1) - Alarm Indication Signal (AIS) and Remote Defect Indication (RDI) cell. loopback(2) - Loopback … |
| 1.3.6.1.4.1.164.12.3.1.1.26.1.3 | ColumnatmNteOamLevel | read-only | current | The level of the OAM cell. f5 (3) - VC level. |
| 1.3.6.1.4.1.164.12.3.1.1.26.1.4 | ColumnatmNteOamEnable | read-write | current | This parameter determines if the specified OAM cells will be enabled. |
| 1.3.6.1.4.1.164.12.3.1.1.27 | ScalaratmNteDefaultLoopbackThreshold | read-write | current | The Default OAM Loopback Failure Threshold value that will be used for configuration. |
| 1.3.6.1.4.1.164.12.3.1.1.28 | ScalaratmNteMaxBurstSize | read-write | current | The Maximum allowed burst size (cell units). This object is applicable for each Physical port. |
| 1.3.6.1.4.1.164.12.3.1.1.29 | ScalaratmNteGranularityFactor | read-write | current | This parameter affects the granularity of the guaranteed Rate (SCR+MCR) in spaced connection (cell/sec units). It is also defines the minimum guaranteed rate i… |
| 1.3.6.1.4.1.164.12.3.1.1.30 | ScalaratmNteTotalInputRate | read-only | current | This parameter indicates the total input rate of the device in cells/sec. |
| 1.3.6.1.4.1.164.12.3.1.1.31 | ScalaratmNteTotalOutputRate | read-only | current | This parameter indicates the total output rate of the device in cells/sec. |
| 1.3.6.1.4.1.164.12.3.1.1.32 | TableatmAlarmForwardingTable | not-accessible | current | The Alarm Forwarding Mechanism will be operated for this table entries. |
| 1.3.6.1.4.1.164.12.3.1.1.32.1 | RowatmAlarmForwardingEntry | not-accessible | current | Each entry in this table is a pair of ports that the Alarm Forwarding Mechanism is determined for. |
| 1.3.6.1.4.1.164.12.3.1.1.32.1.1 | ColumnatmAlarmForwardingFailPort | not-accessible | current | An Index of the port on which a fail occurs. |
| 1.3.6.1.4.1.164.12.3.1.1.32.1.2 | ColumnatmAlarmForwardingToPort | not-accessible | current | An Index of the port that will be affected upon the failure of the atmAlarmForwardingFailPort. |
| 1.3.6.1.4.1.164.12.3.1.1.32.1.3 | ColumnatmAlarmForwardingRowStatus | read-create | current | Creation/Deletion of rows in the table. |
| 1.3.6.1.4.1.164.12.3.1.1.32.1.4 | ColumnatmAlarmForwardingFailureLevel | read-create | current | This parameter determines the level of failure that will operate the Alarm Forwarding Mechanism. |
| 1.3.6.1.4.1.164.12.3.1.1.32.1.5 | ColumnatmAlarmForwardingRecoveryMode | read-create | current | This parameter determines the Recovery Mode. manual - The user should stop the RDI transmission by using the atmAlarmForwardingRecoveryCommand. automatic - The… |
| 1.3.6.1.4.1.164.12.3.1.1.32.1.6 | ColumnatmAlarmForwardingRecoveryCommand | read-create | current | This parameter is a command. It is applicable when atmAlarmForwardingRecoveryMode = manual. on - Will stop the RDI transmission. After setting to 'On' the agen… |
| 1.3.6.1.4.1.164.12.3.1.1.32.1.7 | ColumnatmAlarmForwardingTimeFilterWindow | read-create | current | This parameter determines the Time Filter Window, meaning: how much time (in seconds) should the alarm exist in order to start the Alarm Forwarding operation. |
| 1.3.6.1.4.1.164.12.3.1.1.33 | NodeatmSysConfigCellTest | |||
| 1.3.6.1.4.1.164.12.3.1.1.33.1 | ScalaratmSysConfigCellTestPort | read-write | current | An Index of the port on which the cell test will be sent. |
| 1.3.6.1.4.1.164.12.3.1.1.33.2 | ScalaratmSysConfigCellTestVpi | read-write | current | The VPI on which the cell test will be sent. |
| 1.3.6.1.4.1.164.12.3.1.1.33.3 | ScalaratmSysConfigCellTestVci | read-write | current | The VCI on which the cell test will be sent. |
| 1.3.6.1.4.1.164.12.3.1.1.33.4 | ScalaratmSysConfigCellTestPti | read-write | current | The cell type. |
| 1.3.6.1.4.1.164.12.3.1.1.33.5 | ScalaratmSysConfigCellTestClp | read-write | current | The type of the Cell. |
| 1.3.6.1.4.1.164.12.3.1.1.33.6 | ScalaratmSysConfigCellTestOamType | read-write | current | The OAM type of the Cell. This object is applicable if atmSysConfigCellTestPti = oamSegment/oamEndToEnd . |
| 1.3.6.1.4.1.164.12.3.1.1.33.7 | ScalaratmSysConfigCellTestPayload | read-write | current | The payload of the cell. For OAM cell the payload is set automatically to 6A. |
| 1.3.6.1.4.1.164.12.3.1.1.33.8 | ScalaratmSysConfigCellTestQuantity | read-write | current | Quantity of cells to send. |
| 1.3.6.1.4.1.164.12.3.1.1.33.9 | ScalaratmSysConfigCellTestSendCmd | read-write | current | Setting the variable to send(3) perfroms cell test. The agent will immediately reset the variable to off(2). |
| 1.3.6.1.4.1.164.12.3.1.1.34 | TableatmVpCrossConnectExtenTable | not-accessible | current | An extension to the ATM VP Cross Connect table (RFC2515 - atmVpCrossConnectTable). |
| 1.3.6.1.4.1.164.12.3.1.1.34.1 | RowatmVpCrossConnectExtenEntry | not-accessible | current | An entry in the table. |
| 1.3.6.1.4.1.164.12.3.1.1.34.1.1 | ColumnatmVpCrossConnectName | read-create | current | The Connection's name. |
| 1.3.6.1.4.1.164.12.3.1.1.35 | TableatmVcCrossConnectExtenTable | not-accessible | current | An extension to the ATM VC Cross Connect table (RFC2515 - atmVcCrossConnectTable). |
| 1.3.6.1.4.1.164.12.3.1.1.35.1 | RowatmVcCrossConnectExtenEntry | not-accessible | current | An entry in the table. |
| 1.3.6.1.4.1.164.12.3.1.1.35.1.1 | ColumnatmVcCrossConnectName | read-create | current | The Connection's name. |
| 1.3.6.1.4.1.164.12.3.1.1.37 | ScalaratmNteQosMode | read-write | current | This variable defines the QoS Mode. disable(1) - QoS is disabled. multipleVc(2) - QoS is enabled and multiple VCs can be bound per bridge port. singleVc(3) - Q… |
| 1.3.6.1.4.1.164.12.3.1.1.38 | TableatmTrafficDescrParamXTable | not-accessible | current | An Augment to ATM Traffic Descriptor Parameter Table (atmTrafficDescrParamTable in ATM-MIB; RFC-2515). |
| 1.3.6.1.4.1.164.12.3.1.1.38.1 | RowatmTrafficDescrParamXEntry | not-accessible | current | An entry in the table. |
| 1.3.6.1.4.1.164.12.3.1.1.38.1.1 | ColumnatmTrafficDescrParamMode | read-create | current | The Mode of the Traffic Descriptor. |
| 1.3.6.1.4.1.164.12.3.1.2 | NodeatmNteSysInfo | |||
| 1.3.6.1.4.1.164.12.3.1.2.1 | TableatmNteIdTable | not-accessible | current | The IDs of the cards and of the system. |
| 1.3.6.1.4.1.164.12.3.1.2.1.1 | RowatmNteIdEntry | not-accessible | current | . |
| 1.3.6.1.4.1.164.12.3.1.2.1.1.1 | ColumnatmNteIdIndex | read-only | current | An Index of the Unit ID table. The following units have IDs in this table: 1 - System 2 - ATM Board 3 - User Card 4 - Trunk 1 card 5 - Trunk 2 card 6 - Shaper … |
| 1.3.6.1.4.1.164.12.3.1.2.1.1.2 | ColumnatmNteUnitId | read-only | current | The ID of the Unit. For index = 6, the id will describe the validity of a shaper in the system: 0 - Shaper Not exist 1 - Shaper exist. For index = 7, the id wi… |
| 1.3.6.1.4.1.164.12.3.1.2.1.1.3 | ColumnatmNteUnitVersion | read-only | current | Hardware and Software version of the module. |
| 1.3.6.1.4.1.164.12.3.1.2.1.1.4 | ColumnatmNteCardType | read-only | current | The card type. |
| 1.3.6.1.4.1.164.12.3.1.2.1.1.5 | ColumnatmNteCardStatus | read-only | current | Status of the card in the selected slot. notActive - Connections are in NotReady state. No configuration is available for the card. The access to the card HW i… |
| 1.3.6.1.4.1.164.12.3.1.2.1.1.6 | ColumnatmNteCardCmd | read-write | current | Command on the card that is installed in the selected slot. The commands are applicable according to the value of atmNteCardStatus. See the specification docum… |
| 1.3.6.1.4.1.164.12.3.1.2.1.1.7 | ColumnatmNteProgCardType | read-write | current | The programmed card type. |
| 1.3.6.1.4.1.164.12.3.1.2.2 | ScalaratmSysPSunits | read-only | current | The number of power supply units. |
| 1.3.6.1.4.1.164.12.3.1.2.3 | ScalaratmSysPSunitsInUse | read-only | current | The main power supply in this unit. |
| 1.3.6.1.4.1.164.12.3.1.2.4 | ScalaratmSysFanUnits | read-only | current | The number of fan units. |
| 1.3.6.1.4.1.164.12.3.1.2.5 | ScalaratmSysNetPrts | read-only | current | The number of network ports. |
| 1.3.6.1.4.1.164.12.3.1.2.6 | ScalaratmSysNetPrtInUse | read-only | current | The network port in use. |
| 1.3.6.1.4.1.164.12.3.1.2.7 | ScalaratmNteBridgingMode | read-write | current | Bridging mode can be one of the following: ATM <> Ethernet - Bridging is between the Ethernet port and the ATM port (there is no bridging between VCs). ATM <> … |
| 1.3.6.1.4.1.164.12.3.1.2.8 | NodeatmSysStats | |||
| 1.3.6.1.4.1.164.12.3.1.2.8.1 | ScalaratmSysCurrentCdc | read-only | current | Seconds in which cells dropped was occured in the current 15 minutes interval. |
| 1.3.6.1.4.1.164.12.3.1.2.8.2 | TableatmSysIntervalTable | not-accessible | current | The system level Interval table. |
| 1.3.6.1.4.1.164.12.3.1.2.8.2.1 | RowatmSysIntervalEntry | not-accessible | current | . |
| 1.3.6.1.4.1.164.12.3.1.2.8.2.1.1 | ColumnatmSysIntervalNumber | read-only | current | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that … |
| 1.3.6.1.4.1.164.12.3.1.2.8.2.1.2 | ColumnatmSysIntervalCdc | read-only | current | Seconds in which cells dropped was occured in 15 minutes interval. |
| 1.3.6.1.4.1.164.12.3.1.2.9 | ScalaratmNteEventType | read-only | current | This parameter identifies the event. On - the problem exist. Off - the problem not exist. InvalidLogin - Invalid login on local console. CorrectLogin - Success… |
| 1.3.6.1.4.1.164.12.3.1.2.10 | ScalaratmNteIntervalMaxNumber | read-only | current | The MAX number of connections intervals supported by system. This parameter value is a function of atmNteConnectionsMaxNumber parameter. This parameter should … |
| 1.3.6.1.4.1.164.12.3.1.2.11 | ScalaratmNteAlarmType | read-only | current | This object specifies the type of the alarm. |
| 1.3.6.1.4.1.164.12.3.1.2.12 | ScalaratmNteLevel | read-only | current | This object specifies the ATM level. |
| 1.3.6.1.4.1.164.12.3.1.2.13 | ScalaratmNteConnectionsNumber | read-only | current | This object specifies a quantity of connections. |
| 1.3.6.1.4.1.164.12.3.1.2.14 | ScalaratmNteTotalLb | read-only | current | This parameter counts the total number of end-points that were configured with Loopback (LB). |
| 1.3.6.1.4.1.164.12.3.1.2.15 | ScalaratmNteTotalCc | read-only | current | This parameter counts the total number of end-points that were configured with Continuity Check (CC). |
| 1.3.6.1.4.1.164.12.3.1.2.16 | ScalaratmNteTotalPm | read-only | current | This parameter counts the total number of end-points that were configured with PM. |
| 1.3.6.1.4.1.164.12.3.2 | NodeatmNtePrt | |||
| 1.3.6.1.4.1.164.12.3.2.1 | NodeatmNtePrtConfig | |||
| 1.3.6.1.4.1.164.12.3.2.1.1 | TableatmNteConfIfTable | not-accessible | current | The Physical interface configuration table. |
| 1.3.6.1.4.1.164.12.3.2.1.1.1 | RowatmNteConfIfEntry | not-accessible | current | An entry in the Physical interface configuration table. The ifIndex is of the lowest physical layer. |
| 1.3.6.1.4.1.164.12.3.2.1.1.1.1 | ColumnatmConfIfTransmitClk | read-write | current | The transmit clock of the port. |
| 1.3.6.1.4.1.164.12.3.2.1.1.1.2 | ColumnatmConfIfLoopback | read-write | current | Interface Loopback. |
| 1.3.6.1.4.1.164.12.3.2.1.1.1.3 | ColumnatmConfIfFrameType | read-write | current | The frame type. Valid values for a 155M interface: sonet(2), sdh(3). Valid values for a T3 interface: direct(4), plcpInternal(5), plcpExternal(6), directNoScrm… |
| 1.3.6.1.4.1.164.12.3.2.1.1.1.4 | ColumnatmConfIfCardType | read-only | deprecated | The card type. |
| 1.3.6.1.4.1.164.12.3.2.1.1.1.5 | ColumnatmConfAtmIfVpiVciLimit | read-only | current | The limit on the sum of the VPI+VCI bits for this interface. |
| 1.3.6.1.4.1.164.12.3.2.1.1.1.6 | ColumnatmConfIfHwFeatures | read-write | current | HW features command. |
| 1.3.6.1.4.1.164.12.3.2.1.1.1.7 | ColumnatmConfIfOutputRate | read-write | current | This parameter indicates the output rate in cells/sec, which is supported per port. Successfully setting this parameter is dependent on all other ports values … |
| 1.3.6.1.4.1.164.12.3.2.1.1.1.8 | ColumnatmConfIfInputRate | read-write | current | This parameter indicates the input rate in cells/sec, which is supported per port. Successfully setting this parameter is dependent on all other ports values c… |
| 1.3.6.1.4.1.164.12.3.2.1.1.1.9 | ColumnatmConfAlarmForwarding | read-write | current | Enables Path AIS Alarm forwarding upon a failure detection. The following might be considered as a failure: LOS, LOF, LOC, SLM, LOP, Path AIS and Line AIS. dis… |
| 1.3.6.1.4.1.164.12.3.2.1.1.1.10 | ColumnatmConfIfAllocatedBw | read-only | current | Total VC Bandwidth Allocation. |
| 1.3.6.1.4.1.164.12.3.2.1.1.1.11 | ColumnatmConfIfLowerVpi | read-write | current | The Lower possible VPI. |
| 1.3.6.1.4.1.164.12.3.2.1.1.1.12 | ColumnatmConfIfOamMode | read-write | current | OAM support Mode, which determines the interface's location in a segment wise. |
| 1.3.6.1.4.1.164.12.3.2.1.1.1.13 | ColumnatmConfIfOamFailureInd | read-write | current | This object allows user to define the type of indication (if any) that will be created upon a LB cell failure, for all VCs on which OAM loopback traffic is act… |
| 1.3.6.1.4.1.164.12.3.2.1.2 | TableatmNteAlarmIfTable | not-accessible | current | The interface Alarm table. |
| 1.3.6.1.4.1.164.12.3.2.1.2.1 | RowatmNteAlarmIfEntry | not-accessible | current | An entry in the interface Alarm table. |
| 1.3.6.1.4.1.164.12.3.2.1.2.1.1 | ColumnatmInterfaceActiveAlarms | read-only | current | A Bit String of the active alarms on this interface. An up bit (1) means there is an active alarm of this type. A down bit (0) means there is no such alarm. Th… |
| 1.3.6.1.4.1.164.12.3.2.1.2.1.2 | ColumnatmThresholdSectionBIP | read-write | current | When Section BIPs are greater than this threshold, an active alarm is raised. N/A for ds3/e3 interface. |
| 1.3.6.1.4.1.164.12.3.2.1.2.1.3 | ColumnatmThresholdLineBIP | read-write | current | When Line BIPs are greater than this threshold, an active alarm is raised. N/A for ds3/e3 interface. |
| 1.3.6.1.4.1.164.12.3.2.1.2.1.4 | ColumnatmThresholdLineFEBE | read-write | current | When Line FEBEs are greater than this threshold, an active alarm is raised. N/A for ds3/e3 interface. |
| 1.3.6.1.4.1.164.12.3.2.1.2.1.5 | ColumnatmThresholdPathBIP | read-write | current | When Path BIPs are greater than this threshold, an active alarm is raised. |
| 1.3.6.1.4.1.164.12.3.2.1.2.1.6 | ColumnatmThresholdPathFEBE | read-write | current | When Path FEBEs are greater than this threshold, an active alarm is raised. |
| 1.3.6.1.4.1.164.12.3.2.1.2.1.7 | ColumnatmThresholdErroredCells | read-write | current | When Errored Cells are greater than this threshold, an active alarm is raised. |
| 1.3.6.1.4.1.164.12.3.2.1.2.1.8 | ColumnatmThresholdLostCells | read-write | current | When Lost Cells are greater than this threshold, an active alarm is raised. |
| 1.3.6.1.4.1.164.12.3.2.1.2.1.9 | ColumnatmThresholdMisinsertedCells | read-write | current | When Misinserted Cells are greater than this threshold, an active alarm is raised. |
| 1.3.6.1.4.1.164.12.3.2.1.2.1.10 | ColumnatmInterfaceAlarmStatus | read-only | current | The variable is on(3) when there is any active alarm on this interface. |
| 1.3.6.1.4.1.164.12.3.2.1.2.1.11 | ColumnatmInterfaceMaskAlarms | read-write | current | A Bit String of alarms mask on this interface. An up bit (1) means that the respective alarm is masked. A down bit (0) means no mask. The mask is supported for… |
| 1.3.6.1.4.1.164.12.3.2.1.3 | TableatmNteConfVpTable | not-accessible | current | The ATM VP configuration table. The table is an extension to the atmVplTable of RFC-1695. |
| 1.3.6.1.4.1.164.12.3.2.1.3.1 | RowatmNteConfVpEntry | not-accessible | current | An entry in the ATM VP configuration table. ifIndex of the ATM layer. |
| 1.3.6.1.4.1.164.12.3.2.1.3.1.1 | ColumnatmConfVpPolicing | read-write | current | Policing method desired for this VPL. |
| 1.3.6.1.4.1.164.12.3.2.1.3.1.2 | ColumnatmConfVpCCAdminStatus | read-write | current | up(2) - Activate Continuity Check (CC). down(3) - Deactivate CC. source(4) - Activate OAM CC(Continuity Check) of local agent ( start sending Oam cells to the … |
| 1.3.6.1.4.1.164.12.3.2.1.3.1.3 | ColumnatmConfVpLoopbackAdminStatus | read-write | current | up(2) - Start loopback OAM cells. down(3) - Stop sending loopback OAM cells. For ace2002: up(2) - Transmitting LB cells with llid all ones (i.e. FFFF..FF) down… |
| 1.3.6.1.4.1.164.12.3.2.1.3.1.4 | ColumnatmConfVpLoopbackSinkAddress | read-write | current | Destination address. For ace101: 2 bytes are used. For ace2002: 16 bytes are used. |
| 1.3.6.1.4.1.164.12.3.2.1.3.1.5 | ColumnatmConfVpCongestionControl | read-write | current | Each bit indicates a selection of one option as the following description. All combinations are possible and legal. The codes are: 1 - EPD 2 - CLP 4 - EFCI |
| 1.3.6.1.4.1.164.12.3.2.1.3.1.6 | ColumnatmConfVpCCDirection | read-write | current | both(2) - Agent send OAM CC cells and check received OAM CC cells source(4)- Agent send OAM CC cells. sink(5) - Agent checks received OAM CC cells. |
| 1.3.6.1.4.1.164.12.3.2.1.3.1.7 | ColumnatmConfVpCreationTime | read-only | current | A date-time in which the VP was created. |
| 1.3.6.1.4.1.164.12.3.2.1.3.1.8 | ColumnatmConfVpOamSupport | read-write | current | OAM support mode, which determines the device location in a segment wise. |
| 1.3.6.1.4.1.164.12.3.2.1.3.1.9 | ColumnatmConfVpCCOperStatus | read-only | current | initial(1) - The CC activation process is not started. source(4) - Agent sends OAM CC cells. sink(5) - Agent checks received OAM CC cells. both (8) - OAM CC of… |
| 1.3.6.1.4.1.164.12.3.2.1.3.1.10 | ColumnatmConfVpLoopbackTraffic | read-write | current | This parameter has both command and status meanings: off(2) - Set to 'Off' will Stop traffic loop. Getting this value means that the loop is not running. on (3… |
| 1.3.6.1.4.1.164.12.3.2.1.3.1.11 | ColumnatmConfVpLoopbackFailureInd | read-write | current | This object allows user to define the Indication that will be created upon a LB cell failure. disabled(2) - no indication will be created. segmentAis(3) - will… |
| 1.3.6.1.4.1.164.12.3.2.1.3.1.12 | ColumnatmConfVpLoopbackFailureThreshold | read-write | current | The number of the LB failures before starting transmission of the Indication defined by atmConfVcLoopbackFailureInd. Range: 1..16. Default: 1. |
| 1.3.6.1.4.1.164.12.3.2.1.3.1.13 | ColumnatmConfVpOamDirection | read-write | current | The direction of OAM cell insertion. downStream(2) - The OAM cell will be inserted in downStream. upStream(3) - The OAM cell will be inserted in upStream. |
| 1.3.6.1.4.1.164.12.3.2.1.3.1.14 | ColumnatmConfVpOamDescrIndex | read-write | current | This parameter indicates the VPL's OAM Descriptor index, according to the OAM Descriptor Configuration Table. |
| 1.3.6.1.4.1.164.12.3.2.1.3.1.15 | ColumnatmConfVpConnected | read-write | current | This object indicates whether this VP is connected and if connected, what is it connected to. |
| 1.3.6.1.4.1.164.12.3.2.1.4 | TableatmNteConfVcTable | not-accessible | current | The ATM VC configuration table. The table is an extension to the atmVclTable of RFC-2515. |
| 1.3.6.1.4.1.164.12.3.2.1.4.1 | RowatmNteConfVcEntry | not-accessible | current | An entry in the ATM VC configuration table. ifIndex of the ATM layer. |
| 1.3.6.1.4.1.164.12.3.2.1.4.1.1 | ColumnatmConfVcPolicing | read-write | current | Policing method desired for this VCL. |
| 1.3.6.1.4.1.164.12.3.2.1.4.1.2 | ColumnatmConfVcCCAdminStatus | read-write | current | up(2) - Activate Continuity Check (CC). down(3) - Deactivate CC. source(4) - Activate OAM CC(Continuity Check) of local agent ( start sending Oam cells to the … |
| 1.3.6.1.4.1.164.12.3.2.1.4.1.3 | ColumnatmConfVcLoopbackAdminStatus | read-write | current | up(2) - Start loopback OAM cells. down(3) - Stop sending loopback OAM cells. For ace2002: up(2) - Transmitting LB cells with llid all ones (i.e. FFFF..FF) down… |
| 1.3.6.1.4.1.164.12.3.2.1.4.1.4 | ColumnatmConfVcLoopbackSinkAddress | read-write | current | Destination address. For ace101: 2 bytes are used. For ace2002: 16 bytes are used. |
| 1.3.6.1.4.1.164.12.3.2.1.4.1.5 | ColumnatmConfVcCongestionControl | read-write | current | Each bit indicates a selection of one option as the following description. All combinations are possible and legal. The codes are: 1 - EPD 2 - CLP 4 - EFCI. Fo… |
| 1.3.6.1.4.1.164.12.3.2.1.4.1.6 | ColumnatmConfVcCCDirection | read-write | current | both(2) - Agent sends OAM CC cells and checks received OAM CC cells. none(3) - Agent does not send and does not check received OAM CC cells. source(4)- Agent s… |
| 1.3.6.1.4.1.164.12.3.2.1.4.1.7 | ColumnatmConfVcCreationTime | read-only | current | A date-time in which the VC was created. |
| 1.3.6.1.4.1.164.12.3.2.1.4.1.8 | ColumnatmConfVcOamSupport | read-write | current | OAM support mode, which determines the device location in a segment wise. endToEndAndSegment - In this mode the OAM cells are generated before the ABM (ATM Buf… |
| 1.3.6.1.4.1.164.12.3.2.1.4.1.9 | ColumnatmConfVcCCActivationCtrl | read-write | current | manual(1) - CC Activation process is disable activator(2) - ACE-101 initiate CC Activation process listener(3) - ACE-101 wait to CC Activation request from rem… |
| 1.3.6.1.4.1.164.12.3.2.1.4.1.10 | ColumnatmConfVcCCOperStatus | read-only | current | initial (1) - The CC activation process is not started. up (2) - Continuity Check (CC) activated. down (3) - CC deactivated. source (4) - OAM CC(Continuity Che… |
| 1.3.6.1.4.1.164.12.3.2.1.4.1.11 | ColumnatmConfVcLoopbackTraffic | read-write | current | This parameter has both command and status meanings: off(2) - Set to 'Off' will Stop traffic loop. Getting this value means that the loop is not running. on (3… |
| 1.3.6.1.4.1.164.12.3.2.1.4.1.12 | ColumnatmConfVcLoopbackFailureInd | read-write | current | This object allows user to define the Indication that will be created upon a LB cell failure. disabled(2) - no indication will be created. segmentAis(3) - will… |
| 1.3.6.1.4.1.164.12.3.2.1.4.1.13 | ColumnatmConfVcLoopbackFailureThreshold | read-write | current | The number of the LB failures before starting transmission of the Indication defined by atmConfVcLoopbackFailureInd. Range: 1..16. Default: 1. |
| 1.3.6.1.4.1.164.12.3.2.1.4.1.14 | ColumnatmConfVcOamDirection | read-write | current | The direction of OAM cell insertion. downStream(2) - The OAM cell will be inserted in downStream. upStream(3) - The OAM cell will be inserted in upStream. |
| 1.3.6.1.4.1.164.12.3.2.1.4.1.15 | ColumnatmConfVcName | read-write | current | VC Name. |
| 1.3.6.1.4.1.164.12.3.2.1.4.1.16 | ColumnatmConfVcConnected | read-write | current | This object indicates whether this VC is connected and if connected, what is it connected to. Originally, it was read-only. |
| 1.3.6.1.4.1.164.12.3.2.1.4.1.17 | ColumnatmConfVcOamDescrIndex | read-write | current | This parameter indicates the VCL's OAM Descriptor index, according to the OAM Descriptor Configuration Table. |
| 1.3.6.1.4.1.164.12.3.2.1.4.1.18 | ColumnatmConfVcNoOfUsages | read-only | current | This object indicates the number of times this VCL is used. |
| 1.3.6.1.4.1.164.12.3.2.1.5 | TableatmNteAlarmVpTable | not-accessible | current | The ATM VP Alarm table. |
| 1.3.6.1.4.1.164.12.3.2.1.5.1 | RowatmNteAlarmVpEntry | not-accessible | current | An entry in the ATM VP Alarm table. ifIndex of the ATM layer. |
| 1.3.6.1.4.1.164.12.3.2.1.5.1.1 | ColumnatmNteVpAlarmVpi | read-only | current | The VPI on which there is an active alarm. |
| 1.3.6.1.4.1.164.12.3.2.1.5.1.2 | ColumnatmNteVpActiveAlarms | read-only | current | A Bit String of the active alarms on this VP. An up bit (1) means there is an active alarm of this type. A down bit (0) means there is no such alarm. The meani… |
| 1.3.6.1.4.1.164.12.3.2.1.6 | TableatmNteAlarmVcTable | not-accessible | current | The ATM VC Alarm table. |
| 1.3.6.1.4.1.164.12.3.2.1.6.1 | RowatmNteAlarmVcEntry | not-accessible | current | An entry in the ATM VC Alarm table. ifIndex of the ATM layer. |
| 1.3.6.1.4.1.164.12.3.2.1.6.1.1 | ColumnatmNteVcAlarmVpi | read-only | current | The VPI of the VC on which there is an active alarm. |
| 1.3.6.1.4.1.164.12.3.2.1.6.1.2 | ColumnatmNteVcAlarmVci | read-only | current | The VCI of the VC on which there is an active alarm. |
| 1.3.6.1.4.1.164.12.3.2.1.6.1.3 | ColumnatmNteVcActiveAlarms | read-only | current | A Bit String of the active alarms on this VC. An up bit (1) means there is an active alarm of this type. A down bit (0) means there is no such alarm. The meani… |
| 1.3.6.1.4.1.164.12.3.2.2 | NodeatmNteLoopback | |||
| 1.3.6.1.4.1.164.12.3.2.2.1 | TableatmLoopbackVpTable | not-accessible | current | This table contains parameters for an OAM VP loopback test. |
| 1.3.6.1.4.1.164.12.3.2.2.1.1 | RowatmLoopbackVpEntry | not-accessible | current | An entry in table atmLoopbackVpTable. |
| 1.3.6.1.4.1.164.12.3.2.2.1.1.1 | ColumnatmLoopbackVpIfIndex | read-only | current | The interface index of the ATM layer. |
| 1.3.6.1.4.1.164.12.3.2.2.1.1.2 | ColumnatmLoopbackVpVpi | read-only | current | The VPI of the OAM VPL. |
| 1.3.6.1.4.1.164.12.3.2.2.1.1.3 | ColumnatmLoopbackVpOperStatus | read-only | current | -noActive(1) means that the loopback test has not been activated for this VP. -inProgress(2) means that the test has been activated and there is currently no p… |
| 1.3.6.1.4.1.164.12.3.2.2.1.1.4 | ColumnatmLoopbackVpCDV | read-only | current | Cell Delay Variation for this sampling. |
| 1.3.6.1.4.1.164.12.3.2.2.1.1.5 | ColumnatmLoopbackVpAverageDelay | read-only | current | Average delay without including lost cells. |
| 1.3.6.1.4.1.164.12.3.2.2.1.1.6 | ColumnatmLoopbackVpMaxDelay | read-only | current | Maximum delay without including lost cells. |
| 1.3.6.1.4.1.164.12.3.2.2.1.1.7 | ColumnatmLoopbackVpMinDelay | read-only | current | Minimum delay. |
| 1.3.6.1.4.1.164.12.3.2.2.1.1.8 | ColumnatmLoopbackVpErrSessions | read-only | current | Errored Sessions. Will be updated once in 5 seconds. |
| 1.3.6.1.4.1.164.12.3.2.2.2 | TableatmLoopbackVcTable | not-accessible | current | This table contains parameters for an OAM VC loopback test. |
| 1.3.6.1.4.1.164.12.3.2.2.2.1 | RowatmLoopbackVcEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.12.3.2.2.2.1.1 | ColumnatmLoopbackVcIfIndex | read-only | current | The interface index of the ATM layer. |
| 1.3.6.1.4.1.164.12.3.2.2.2.1.2 | ColumnatmLoopbackVcVpi | read-only | current | The VPI of the OAM VCL. |
| 1.3.6.1.4.1.164.12.3.2.2.2.1.3 | ColumnatmLoopbackVcVci | read-only | current | The VCI of the OAM VCL. |
| 1.3.6.1.4.1.164.12.3.2.2.2.1.4 | ColumnatmLoopbackVcOperStatus | read-only | current | -noActive(1) means that the loopback test has not been activated for this VP. -inProgress(2) means that the test has been activated and there is currently no p… |
| 1.3.6.1.4.1.164.12.3.2.2.2.1.5 | ColumnatmLoopbackVcCDV | read-only | current | Cell Delay Variation for this sampling. |
| 1.3.6.1.4.1.164.12.3.2.2.2.1.6 | ColumnatmLoopbackVcAverageDelay | read-only | current | Average delay without including lost cells. |
| 1.3.6.1.4.1.164.12.3.2.2.2.1.7 | ColumnatmLoopbackVcMaxDelay | read-only | current | The maximum delay without including lost cells. |
| 1.3.6.1.4.1.164.12.3.2.2.2.1.8 | ColumnatmLoopbackVcMinDelay | read-only | current | The minimum delay. |
| 1.3.6.1.4.1.164.12.3.2.2.2.1.9 | ColumnatmLoopbackVcErrSessions | read-only | current | Errored Sessions. Will be updated once in 5 seconds. |
| 1.3.6.1.4.1.164.12.3.2.2.3 | TableatmLoopbackVpIvlTable | not-accessible | current | This table contains parameters for an OAM VP loopback test, according interval number. |
| 1.3.6.1.4.1.164.12.3.2.2.3.1 | RowatmLoopbackVpIvlEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.12.3.2.2.3.1.1 | ColumnatmLoopbackVpIvlIfIndex | read-only | current | The interface index of the ATM layer. |
| 1.3.6.1.4.1.164.12.3.2.2.3.1.2 | ColumnatmLoopbackVpIvlVpi | read-only | current | The VPI of the OAM VPL. |
| 1.3.6.1.4.1.164.12.3.2.2.3.1.3 | ColumnatmLoopbackVpIvlIvl | read-only | current | The relevant interval number. |
| 1.3.6.1.4.1.164.12.3.2.2.3.1.4 | ColumnatmLoopbackVpIvlOperStatus | read-only | current | -noActive(1) means that the loopback test has not been activated for this VP during this interval. -inProgress(2) has no meaning for an ended interval. -failed… |
| 1.3.6.1.4.1.164.12.3.2.2.3.1.5 | ColumnatmLoopbackVpIvlCDV | read-only | current | Cell Delay Variation for this interval. |
| 1.3.6.1.4.1.164.12.3.2.2.3.1.6 | ColumnatmLoopbackVpIvlAverageDelay | read-only | current | Average delay without including lost cells for this interval. |
| 1.3.6.1.4.1.164.12.3.2.2.3.1.7 | ColumnatmLoopbackVpIvlMaxDelay | read-only | current | The maximum delay without including lost cells for this interval. |
| 1.3.6.1.4.1.164.12.3.2.2.3.1.8 | ColumnatmLoopbackVpIvlMinDelay | read-only | current | The minimum delay for this interval. |
| 1.3.6.1.4.1.164.12.3.2.2.3.1.9 | ColumnatmLoopbackVpIvlErrSessions | read-only | current | Errored Sessions. Will be updated once in 5 seconds. |
| 1.3.6.1.4.1.164.12.3.2.2.4 | TableatmLoopbackVcIvlTable | not-accessible | current | This table contains parameters for an OAM VC loopback test. |
| 1.3.6.1.4.1.164.12.3.2.2.4.1 | RowatmLoopbackVcIvlEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.12.3.2.2.4.1.1 | ColumnatmLoopbackVcIvlIfIndex | read-only | current | The interface index of the ATM layer. |
| 1.3.6.1.4.1.164.12.3.2.2.4.1.2 | ColumnatmLoopbackVcIvlVpi | read-only | current | The VPI of the OAM VCL. |
| 1.3.6.1.4.1.164.12.3.2.2.4.1.3 | ColumnatmLoopbackVcIvlVci | read-only | current | The VCI of the OAM VCL. |
| 1.3.6.1.4.1.164.12.3.2.2.4.1.4 | ColumnatmLoopbackVcIvlIvl | read-only | current | The relevant interval number. |
| 1.3.6.1.4.1.164.12.3.2.2.4.1.5 | ColumnatmLoopbackVcIvlOperStatus | read-only | current | -noActive(1) means that the loopback test has not been activated for this VC during this interval. -inProgress(2) has no meaning per interval. -failed(3) means… |
| 1.3.6.1.4.1.164.12.3.2.2.4.1.6 | ColumnatmLoopbackVcIvlCDV | read-only | current | Cell Delay Variation for this interval. |
| 1.3.6.1.4.1.164.12.3.2.2.4.1.7 | ColumnatmLoopbackVcIvlAverageDelay | read-only | current | Average delay without including lost cells. |
| 1.3.6.1.4.1.164.12.3.2.2.4.1.8 | ColumnatmLoopbackVcIvlMaxDelay | read-only | current | The maximum delay without including lost cells. |
| 1.3.6.1.4.1.164.12.3.2.2.4.1.9 | ColumnatmLoopbackVcIvlMinDelay | read-only | current | The minimum delay. |
| 1.3.6.1.4.1.164.12.3.2.2.4.1.10 | ColumnatmLoopbackVcIvlErrSessions | read-only | current | Errored Sessions. Will be updated once in 5 seconds. |
| 1.3.6.1.4.1.164.12.3.2.3 | NodeatmNtePM | |||
| 1.3.6.1.4.1.164.12.3.2.3.1 | TableatmVpPmTable | not-accessible | current | This table contains parameters for VP performance monitoring. |
| 1.3.6.1.4.1.164.12.3.2.3.1.1 | RowatmVpPmEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.12.3.2.3.1.1.1 | ColumnatmVpPmIfIndex | read-only | current | The interface index of the ATM layer. |
| 1.3.6.1.4.1.164.12.3.2.3.1.1.2 | ColumnatmVpPmVpi | read-only | current | The VPI of the Performance Monitoring VPL. |
| 1.3.6.1.4.1.164.12.3.2.3.1.1.3 | ColumnatmVpPmAdminStatus | read-create | current | up(2) - Activate PM. down(3) - Deactivate PM. listenToActivationCells(4) - . originateActivationCells(5) - . |
| 1.3.6.1.4.1.164.12.3.2.3.1.1.4 | ColumnatmVpPmDirection | read-create | current | The direction of PM. |
| 1.3.6.1.4.1.164.12.3.2.3.1.1.5 | ColumnatmVpPmBlockSize | read-create | current | Valid block sizes (in cells): 128, 256, 512, 1024, 2048, 4096, 8192, 16384, 32768. |
| 1.3.6.1.4.1.164.12.3.2.3.1.1.6 | ColumnatmVpPmRowStatus | read-create | current | Creation/Deletion of rows in the table. |
| 1.3.6.1.4.1.164.12.3.2.3.1.1.7 | ColumnatmVpPmSink | read-create | current | off (1) - Deactivate PM. fwd (2) - Activate Forward PM only. fwdAndBwdReport(3) - Activate Forward PM and Backward reporting. |
| 1.3.6.1.4.1.164.12.3.2.3.1.1.8 | ColumnatmVpPmSource | read-create | current | off (1) - Deactivate PM. fwd (2) - Activate Forward PM only. fwdAndBwdReport(3) - Activate Forward PM and Backward reporting. |
| 1.3.6.1.4.1.164.12.3.2.3.2 | TableatmVcPmTable | not-accessible | current | This table contains parameters for VC performance monitoring. |
| 1.3.6.1.4.1.164.12.3.2.3.2.1 | RowatmVcPmEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.12.3.2.3.2.1.1 | ColumnatmVcPmIfIndex | read-only | current | The interface index of the ATM layer. |
| 1.3.6.1.4.1.164.12.3.2.3.2.1.2 | ColumnatmVcPmVpi | read-only | current | The VPI of the Performance Monitoring VCL. |
| 1.3.6.1.4.1.164.12.3.2.3.2.1.3 | ColumnatmVcPmVci | read-only | current | The VCI of the PM VCL. |
| 1.3.6.1.4.1.164.12.3.2.3.2.1.4 | ColumnatmVcPmAdminStatus | read-create | current | up(2) - Activate PM. down(3) - Deactivate PM. listenToActivationCells(4) - . originateActivationCells(5) - . |
| 1.3.6.1.4.1.164.12.3.2.3.2.1.5 | ColumnatmVcPmDirection | read-create | current | The direction of PM. |
| 1.3.6.1.4.1.164.12.3.2.3.2.1.6 | ColumnatmVcPmBlockSize | read-create | current | Valid block sizes (in cells): 128, 256, 512, 1024, 2048, 4096, 8192, 16384, 32768. |
| 1.3.6.1.4.1.164.12.3.2.3.2.1.7 | ColumnatmVcPmRowStatus | read-create | current | Creation/Deletion of rows in the table. |
| 1.3.6.1.4.1.164.12.3.2.3.2.1.8 | ColumnatmVcPmSink | read-create | current | off (1) - Deactivate PM. fwd (2) - Activate Forward PM only. fwdAndBwdReport(3) - Activate Forward PM and Backward reporting. |
| 1.3.6.1.4.1.164.12.3.2.3.2.1.9 | ColumnatmVcPmSource | read-create | current | off (1) - Deactivate PM. fwd (2) - Activate Forward PM only. fwdAndBwdReport(3) - Activate Forward PM and Backward reporting. |
| 1.3.6.1.4.1.164.12.3.3 | NodeatmNteMdl | |||
| 1.3.6.1.4.1.164.12.3.3.1 | NodeatmNteMdlConfig | |||
| 1.3.6.1.4.1.164.12.3.3.1.1 | TableatmNteMdlConfigTable | not-accessible | current | Module configuration table. |
| 1.3.6.1.4.1.164.12.3.3.1.1.1 | RowatmNteMdlConfigEntry | not-accessible | current | There is an entry in this table just for those modules that have parameters that are relevant to module level only. |
| 1.3.6.1.4.1.164.12.3.3.1.1.1.1 | ColumnatmNteMdlSlotIndex | not-accessible | current | The slot number. |
| 1.3.6.1.4.1.164.12.3.3.1.1.1.2 | ColumnatmNteMdlPrtCpuSharing | read-write | current | This object lets the user decide what will be the CPU sharing between the ports of the module. This object is applicable for modules in which the same CPU hand… |
| 1.3.6.1.4.1.164.12.3.3.1.1.1.3 | ColumnatmNteMdlInputPriorityMechanism | read-write | current | This object allows the user to Enable/Disable the Input priority mechanism. This object is applicable for modules with more than one port, in which the total p… |
| 1.3.6.1.4.1.164.12.4 | NodeatmSu | |||
| 1.3.6.1.4.1.164.12.4.1 | NodeatmSuSystem | |||
| 1.3.6.1.4.1.164.12.4.1.1 | ScalaratmSuSystemSwOperStatus | read-write | current | This value indicates if tftp_write operation (for downloading software from an external host) is allowed by the agent. |
| 1.3.6.1.4.1.164.12.4.1.2 | ScalaratmSuSystemSwSwitchVersionsCmd | read-write | current | This command is used to switch beetween software versions stored in the flash. setting this value to active will reset the agent and re-activate it with the ne… |
| 1.3.6.1.4.1.164.12.4.1.3 | TableatmSuSystemHistoryAlrTable | not-accessible | current | buffer contain history buffer of agent alarms. |
| 1.3.6.1.4.1.164.12.4.1.3.1 | RowatmSuSystemHistoryAlrEntry | not-accessible | current | Agent alarm history list entry. |
| 1.3.6.1.4.1.164.12.4.1.3.1.1 | ColumnatmSuSystemHistoryAlrIndex | read-only | current | A unique number to identify an entry in the history alarm table. |
| 1.3.6.1.4.1.164.12.4.1.3.1.2 | ColumnatmSuSystemHistoryAlrIfIndex | read-only | current | This value indicates the port on which the alarms occured. configuration(system) alarms have port index equal to 0. |
| 1.3.6.1.4.1.164.12.4.1.3.1.3 | ColumnatmSuSystemHistoryAlrDescription | read-only | current | This attribute is a text description of the alarm. The alarm descipion include alarm code and alarm text. |
| 1.3.6.1.4.1.164.12.4.1.3.1.4 | ColumnatmSuSystemHistoryAlrStatus | read-only | current | This attribute indicates the status of the alarm. |
| 1.3.6.1.4.1.164.12.4.1.3.1.5 | ColumnatmSuSystemHistoryAlrOccurrenceTime | read-only | current | This value indicates the date and time of the occurrence of the event that caused this alarm. Date and time format: YYYY-MM-DD, HH:MM:SS |
| 1.3.6.1.4.1.164.12.4.1.3.1.6 | ColumnatmSuSystemHistoryAlrVpi | read-only | current | This value indicates the ATM VPI of the connection associated with the event that caused this alarm. When not applicable, value is 0 |
| 1.3.6.1.4.1.164.12.4.1.3.1.7 | ColumnatmSuSystemHistoryAlrVci | read-only | current | This value indicates the ATM VCI of the connection associated with with the event that caused this alarm. When not applicable, value is 0 |
| 1.3.6.1.4.1.164.12.4.1.4 | ScalaratmSuSystemClearHistoryAlrListCmd | read-write | current | Setting this attribute to ON, enforce a clear operation on the agent history event buffer . On reading, attribute will always get status 'off' . |
| 1.3.6.1.4.1.164.12.4.1.5 | TableatmSuSystemCurrentAlrTable | not-accessible | current | table which contains all alarms Currently active ( status ON ) in the agent. |
| 1.3.6.1.4.1.164.12.4.1.5.1 | RowatmSuSystemCurrentAlrEntry | not-accessible | current | Agent alarm list entry. |
| 1.3.6.1.4.1.164.12.4.1.5.1.1 | ColumnatmSuSystemCurrentAlrIndex | read-only | current | A unique number to identify an entry in the Current alarms table. |
| 1.3.6.1.4.1.164.12.4.1.5.1.2 | ColumnatmSuSystemCurrentAlrIfIndex | read-only | current | This value indicates the port on which the alarms occured. configuration alarms have port index equal to 0. |
| 1.3.6.1.4.1.164.12.4.1.5.1.3 | ColumnatmSuSystemCurrentAlrDescription | read-only | current | This attribute is a text description of the alarm. The alarm descipion include alarm code and alarm text. |
| 1.3.6.1.4.1.164.12.4.1.6 | ScalaratmSuSystemILMICommunity | read-write | current | Community string for ILMI requests. 10 chars. |
| 1.3.6.1.4.1.164.12.4.1.7 | ScalaratmSuSystemTrapMaxManagers | read-only | current | The maximum number of managers that can be registered for receiving traps and sending requests. |
| 1.3.6.1.4.1.164.12.4.1.8 | ScalaratmSuSystemAalSelection | read-write | current | Select ATM adaptation layers AAL1 or AAL2 Applicable for LA-140 |
| 1.3.6.1.4.1.164.12.4.1.9 | ScalaratmSuSystemCodingLaw | read-write | current | This attribute indicates the Method/Law for decoding/encoding the voice information. aLaw (2) is the standard Law for E1 links. uLaw (3) is the standard Law fo… |
| 1.3.6.1.4.1.164.12.4.1.10 | ScalaratmSuSystemISDNDataLinkActivation | read-write | current | This attribute indicates data link aactivation for all ISDN ports in the system. nonPermanent (2) = non permanent data link activation permanent (3) = permanen… |
| 1.3.6.1.4.1.164.12.4.1.11 | ScalaratmSuSystemJitterBuffer | read-write | current | The field is set in ms and sets the jitter buffer size. The jitter buffer adapts the size of the LA140 traffic to the cdv (cell delay variation) of the ATM net… |
| 1.3.6.1.4.1.164.12.4.1.12 | ScalaratmSuSystemOperMode | read-write | current | The field indicates device mode of operation: ima (2) = Inverse Multiplex ATM - ATM traffic is distributed between links in IMA group. miniDSLAM (3) => each li… |
| 1.3.6.1.4.1.164.12.4.1.13 | ScalaratmSuSystemDSPGain | read-write | current | This object indicates DSP Gain. Range of possible values is -12....12. For LA-110 suset of this range is supported. |
| 1.3.6.1.4.1.164.12.4.1.14 | ScalaratmSuSystemBundlesApplication | read-write | current | This object defines application of each bundle . each bundle is represented by two bits: 00 - TDM over ATM 01 - Frame Relay. bit 0,1 represents bundle 1 but 2,… |
| 1.3.6.1.4.1.164.12.4.1.15 | ScalaratmSuSystemMsOperMode | read-write | current | The field indicates device mode of operation: msOverAtm (2) = Multi Service over ATM. msOverPsn (3) = Multi Service over PSN (using Pseudo Wires) |
| 1.3.6.1.4.1.164.12.4.1.16 | ScalaratmSuSystemPwTransportLayer | read-write | current | The field indicates device pseudo wire Transport Layer, when atmSuSystemMsOperMode = msOverPsn. |
| 1.3.6.1.4.1.164.12.4.2 | NodeatmSuPort | |||
| 1.3.6.1.4.1.164.12.4.2.1 | TableatmSuPortDataCnfgTable | not-accessible | current | Data Port global configuration table. this table include parametes which are common to the physical port and not depend on whether the port interface is Frame-… |
| 1.3.6.1.4.1.164.12.4.2.1.1 | RowatmSuPortDataCnfgEntry | not-accessible | current | the entries at this table describes the configuration of the Data-Port. |
| 1.3.6.1.4.1.164.12.4.2.1.1.1 | ColumnatmSuPortDataApplication | read-write | current | This attribute indicates the protocol application which runs above the physical port. |
| 1.3.6.1.4.1.164.12.4.2.1.1.2 | ColumnatmSuPortDataRate | read-write | current | This attribute indicates the operation rate of the port. AmcdT1 / Ace-20T allowes rates up to 1536KBps ( options 1-12 ), while AmcdE1 / Ace-20E allowes all opt… |
| 1.3.6.1.4.1.164.12.4.2.1.1.3 | ColumnatmSuPortDataDCD | read-write | current | This attribute indicates if the bits CtsCd( Clear-to-send Carry-detect) are being checked. In AMCD CTS is also checked. off - ignore DCD signal on - obey DCD s… |
| 1.3.6.1.4.1.164.12.4.2.1.1.4 | ColumnatmSuPortDataMode | read-only | deprecated | This attribute indicates the port mode of sampling data physical. |
| 1.3.6.1.4.1.164.12.4.2.1.1.5 | ColumnatmSuPortDataCRC | read-write | current | This attribute indicates the type of CRC checking on receiving/transmiting frames. |
| 1.3.6.1.4.1.164.12.4.2.1.1.6 | ColumnatmSuPortDataClock | read-write | current | This attribute indicates the clock using for synchronization for the data port. |
| 1.3.6.1.4.1.164.12.4.2.1.1.7 | ColumnatmSuPortDataMaxNoOfConns | read-only | current | this object indicates the maximum number of cross-connect connections allowed beetween the ATM port and the Data Port identified by IfIndex. |
| 1.3.6.1.4.1.164.12.4.2.1.1.8 | ColumnatmSuPortDataConfNoOfConns | read-only | current | this object indicates the configured number of cross-connect connections exist beetween the ATM port and the Data Port identified by IfIndex. |
| 1.3.6.1.4.1.164.12.4.2.1.1.9 | ColumnatmSuPortDataIdleCode | read-write | current | This attribute is applicable only for application aal1Stream. It indicates the value to be transmitted whenever the port is idle. |
| 1.3.6.1.4.1.164.12.4.2.1.1.10 | ColumnatmSuPortDataInterfaceType | read-write | current | Physical layer interface type. (Configureable or Non-Configureable) |
| 1.3.6.1.4.1.164.12.4.2.1.1.11 | ColumnatmSuPortDataClkPolarity | read-write | current | This object indicates the clock polarity. For LA-110/140 this object will be applicable only for X.21/V.35/data port |
| 1.3.6.1.4.1.164.12.4.2.1.1.12 | ColumnatmSuPortDataCtsStatus | read-only | current | CTS status - the signal state received from ATM network (for the local DTE usage). LA110 receiving RTS down from remote DTE device via ATM network, will change… |
| 1.3.6.1.4.1.164.12.4.2.1.1.13 | ColumnatmSuPortDataRtsStatus | read-only | current | RTS status - the signal state received from local DTE (to be forwarded to ATM network). LA110 receiving RTS down from the local DTE device will transmit all '1… |
| 1.3.6.1.4.1.164.12.4.2.2 | NodeatmSuPortDs1 | |||
| 1.3.6.1.4.1.164.12.4.2.2.1 | TableatmSuPortDs1CnfgTable | not-accessible | current | This table include expansion configuration to the DS1 physical port. |
| 1.3.6.1.4.1.164.12.4.2.2.1.1 | RowatmSuPortDs1CnfgEntry | not-accessible | current | the entries at this table describes the configuration of the agent physical. |
| 1.3.6.1.4.1.164.12.4.2.2.1.1.1 | ColumnatmSuPortDs1CnfgRxSensitivity | read-write | current | This attribute is the rx line sensetivity parameter used only for T1/CSU and E1/LTU interfaces. |
| 1.3.6.1.4.1.164.12.4.2.2.1.1.2 | ColumnatmSuPortDs1CnfgLBO | read-write | current | This attribute is the line-Build-Out indicates sensitivity of the DS1 interface. The user can define if the agent will be CSU or DSU (for T1 only) by choosing … |
| 1.3.6.1.4.1.164.12.4.2.2.1.1.3 | ColumnatmSuPortDs1CnfgRestoreTime | read-write | current | Determines the time passing from the disappearance of the loss of synchronization condition (red alarm) to the restoration of normal service. The options 1secF… |
| 1.3.6.1.4.1.164.12.4.2.2.1.1.4 | ColumnatmSuPortDs1CnfgInbandMng | read-write | current | A unique number to identify type of inband management over the link. For LA-104 and IMXi4, only one port may be used for inband management |
| 1.3.6.1.4.1.164.12.4.2.2.1.1.5 | ColumnatmSuPortDs1CnfgDedicatedTs | read-write | current | A unique number to identify Dedicated Time Slot for inband management of the T1/E1 port. It is applicable only when atmSuPortDs1CnfgInbandMng selected is not o… |
| 1.3.6.1.4.1.164.12.4.2.2.2 | TableatmSuPortDs1CbrCnfgTable | not-accessible | current | This table include expansion configuration to the DS1 physical port. |
| 1.3.6.1.4.1.164.12.4.2.2.2.1 | RowatmSuPortDs1CbrCnfgEntry | not-accessible | current | the entries at this table describes the configuration of the agent physical. |
| 1.3.6.1.4.1.164.12.4.2.2.2.1.1 | ColumnatmSuPortDs1CbrIdleCode | read-write | current | An Idle code which sent on unused time-slots at CBR port . |
| 1.3.6.1.4.1.164.12.4.2.2.2.1.2 | ColumnatmSuPortDs1CbrRxTimeSlots | read-only | current | This value indicates the time-slots used by the port for receiving. It uses 32 bits ( in 4 bytes octet string ) for E1 and low 24 bits for T1. each bit represe… |
| 1.3.6.1.4.1.164.12.4.2.2.2.1.3 | ColumnatmSuPortDs1CbrTxTimeSlots | read-only | current | This value indicates the time-slots used by the port for transmiting. It uses 32 bits for E1 and low 24 bits for T1. each bit represents a time slot for transm… |
| 1.3.6.1.4.1.164.12.4.2.2.2.1.4 | ColumnatmSuPortDs1CbrMaxNoOfConns | read-only | current | this object indicates the maximum number of cross-connect connections allowed beetween the ATM port and the CBR Port identified by IfIndex. |
| 1.3.6.1.4.1.164.12.4.2.2.2.1.5 | ColumnatmSuPortDs1CbrConfNoOfConns | read-only | current | this object indicates the configured number of cross-connect connections exist beetween the ATM port and the CBR Port identified by IfIndex. |
| 1.3.6.1.4.1.164.12.4.2.2.2.1.6 | ColumnatmSuPortDs1CbrSignallingSampleTime | read-write | current | determines how often the signalling of the DBCES connections are sampled and thier activity determined. |
| 1.3.6.1.4.1.164.12.4.2.3 | NodeatmSuPortAtm | |||
| 1.3.6.1.4.1.164.12.4.2.3.1 | TableatmSuPortAtmCnfgTable | not-accessible | current | This table contains global configuration to the ATM port. |
| 1.3.6.1.4.1.164.12.4.2.3.1.1 | RowatmSuPortAtmCnfgEntry | not-accessible | current | This object contains information about agent ATM configuration. |
| 1.3.6.1.4.1.164.12.4.2.3.1.1.1 | ColumnatmSuPortAtmCnfgIdleCellCLP | read-write | current | Determines the clp bit value for transmition in empty time slots. |
| 1.3.6.1.4.1.164.12.4.2.3.1.1.2 | ColumnatmSuPortAtmCnfgScramble | read-write | current | Determined by the standards if the cell will be scrambled or not. |
| 1.3.6.1.4.1.164.12.4.2.3.1.1.3 | ColumnatmSuPortAtmSNMPVpi | read-write | current | The Vcc Vpi for SNMP requests. |
| 1.3.6.1.4.1.164.12.4.2.3.1.1.4 | ColumnatmSuPortAtmSNMPVci | read-write | current | The Vcc Vci for SNMP requests. |
| 1.3.6.1.4.1.164.12.4.2.3.1.1.5 | ColumnatmSuPortAtmSNMPStatus | read-write | current | value indicates if the SNMP Vcc is available for management. |
| 1.3.6.1.4.1.164.12.4.2.3.1.1.6 | ColumnatmSuPortAtmILMIStatus | read-write | current | Value indicates if agent should respond to ILMI requests from the Atm switch or forward it. note: when using Atm to Frame-Relay configuration this value should… |
| 1.3.6.1.4.1.164.12.4.2.3.1.1.7 | ColumnatmSuPortAtmSNMPIp | read-write | current | The interface IP address for SNMP requests. |
| 1.3.6.1.4.1.164.12.4.2.3.1.1.8 | ColumnatmSuPortAtmCnfgCDVOptimization | read-write | current | value indicates if optimization of CDV (Cell Delay Varation) is enbabled. |
| 1.3.6.1.4.1.164.12.4.2.3.1.1.9 | ColumnatmSuPortAtmCnfgShapingMode | read-write | current | ATM Shaping mode. Three possible values: SW Shaping. HW Shaping - APC with NCITS = 1. HW Shaping - APC with NCITS = 2 The difference between the two hardware m… |
| 1.3.6.1.4.1.164.12.4.2.3.1.1.10 | ColumnatmSuPortAtmSNMPTrafficDescrIndex | read-write | current | The value of this object identifies the row in the atmTrafficDescrParamTable which applies to the transmit direction of the VCL. |
| 1.3.6.1.4.1.164.12.4.2.3.1.1.11 | ColumnatmSuPortAtmTrafficDescrIndex | read-write | current | The value of this object identifies the row in the atmTrafficDescrParamTable which applies to whole ATM WAN port. |
| 1.3.6.1.4.1.164.12.4.2.3.2 | TableatmSuPortAtmIfStatsTable | not-accessible | current | The table contains additional statistics information about the ATM interface. |
| 1.3.6.1.4.1.164.12.4.2.3.2.1 | RowatmSuPortAtmIfStatsEntry | not-accessible | current | An entry in the ATM Interface statistics table. |
| 1.3.6.1.4.1.164.12.4.2.3.2.1.1 | ColumnatmSuPortAtmRxClp0Cells | read-only | current | The number of cells received with correct HECs and CLP=0 and not misrouted |
| 1.3.6.1.4.1.164.12.4.2.3.2.1.2 | ColumnatmSuPortAtmRxClp1Cells | read-only | current | The number of cells received with correct HEC's and CLP=1 and not misrouted. |
| 1.3.6.1.4.1.164.12.4.2.3.2.1.3 | ColumnatmSuPortAtmRxEfciSetCells | read-only | current | The number of cells received with EFCI bit set by the Agent |
| 1.3.6.1.4.1.164.12.4.2.3.2.1.4 | ColumnatmSuPortAtmRxOamCells | read-only | current | The number of OAM cells received with correct HECs. |
| 1.3.6.1.4.1.164.12.4.2.3.2.1.5 | ColumnatmSuPortAtmTxClp0Cells | read-only | current | The number of cells transmitted with CLP=0. |
| 1.3.6.1.4.1.164.12.4.2.3.2.1.6 | ColumnatmSuPortAtmTxClp1Cells | read-only | current | The number of cells transmitted with CLP=1. |
| 1.3.6.1.4.1.164.12.4.2.3.2.1.7 | ColumnatmSuPortAtmTxEfciSetCells | read-only | current | The number of cells transmitted with EFCI bit set by the Agent |
| 1.3.6.1.4.1.164.12.4.2.3.2.1.8 | ColumnatmSuPortAtmTxOamCells | read-only | current | The number of transmitted OAM cells. |
| 1.3.6.1.4.1.164.12.4.2.3.3 | TableatmSuPortAtmVclStatsTable | not-accessible | current | The table contains additional information about the ATM Vcl end points. |
| 1.3.6.1.4.1.164.12.4.2.3.3.1 | RowatmSuPortAtmVclStatsEntry | not-accessible | current | An entry in the ATM Vcl statistics table. For Vpl statistics, use atmVclVci = 65536 (maximum valid value of atmVclVci +1) |
| 1.3.6.1.4.1.164.12.4.2.3.3.1.1 | ColumnatmSuPortAtmVclStatsRxCells | read-only | current | The total number of cells received with correct HEC's. |
| 1.3.6.1.4.1.164.12.4.2.3.3.1.2 | ColumnatmSuPortAtmVclStatsRxClp0Cells | read-only | current | The number of cells received with correct HEC's and CLP=0. |
| 1.3.6.1.4.1.164.12.4.2.3.3.1.3 | ColumnatmSuPortAtmVclStatsRxClp1Cells | read-only | current | The number of cells received with correct HEC's and CLP=1. |
| 1.3.6.1.4.1.164.12.4.2.3.3.1.4 | ColumnatmSuPortAtmVclStatsRxDiscardsCells | read-only | current | The number of cells, in ingress direction, discarded due to policing violation. |
| 1.3.6.1.4.1.164.12.4.2.3.3.1.5 | ColumnatmSuPortAtmVclStatsTxCells | read-only | current | The total number of cells transmitted. |
| 1.3.6.1.4.1.164.12.4.2.3.3.1.6 | ColumnatmSuPortAtmVclStatsTxClp0Cells | read-only | current | The number of cells transmitted with CLP=0. |
| 1.3.6.1.4.1.164.12.4.2.3.3.1.7 | ColumnatmSuPortAtmVclStatsTxClp1Cells | read-only | current | The number of cells transmitted with CLP=1. |
| 1.3.6.1.4.1.164.12.4.2.3.3.1.8 | ColumnatmSuPortAtmVclStatsRxTotalAISCells | read-only | current | Total number of AIS cells received on the VC. |
| 1.3.6.1.4.1.164.12.4.2.3.3.1.9 | ColumnatmSuPortAtmVclStatsRxTotalCCCells | read-only | current | Total number of Continuity Check cells that were received on the VC. |
| 1.3.6.1.4.1.164.12.4.2.3.3.1.10 | ColumnatmSuPortAtmVclStatsTotalSuccLoopbacks | read-only | current | Total number of loopbacks that were requested by the ACE20 and for which there was a response (not supported). |
| 1.3.6.1.4.1.164.12.4.2.3.3.1.11 | ColumnatmSuPortAtmVclStatsTotalFailLoopbacks | read-only | current | Total number of loopbacks that were requested by the ACE20 and for which there was no response (not supported). |
| 1.3.6.1.4.1.164.12.4.2.3.3.1.12 | ColumnatmSuPortAtmVclStatsRxTotalRDICells | read-only | current | Total number of RDI cells received on a VC. |
| 1.3.6.1.4.1.164.12.4.2.3.3.1.13 | ColumnatmSuPortAtmVclStatsTotalLOCSeconds | read-only | current | Total number of seconds during which there was loss of continuity on the VC - no data and no continuity check cells were received on the VC whilst it was in 's… |
| 1.3.6.1.4.1.164.12.4.2.3.3.1.14 | ColumnatmSuPortAtmVclStatsRxTotalLoopbackRequests | read-only | current | Total number of loopback requests received by the ACE20 on a VC. |
| 1.3.6.1.4.1.164.12.4.2.3.3.1.15 | ColumnatmSuPortAtmVclStatsTxTotalAISCells | read-only | current | Total number of AIS cells that were transmitted on a VC. |
| 1.3.6.1.4.1.164.12.4.2.3.3.1.16 | ColumnatmSuPortAtmVclStatsTxTotalCCCells | read-only | current | Total number of continuity check cells that were transmitted on a VC (when there is no data cells and the connection is in 'source' continuity check mode). |
| 1.3.6.1.4.1.164.12.4.2.3.3.1.17 | ColumnatmSuPortAtmVclStatsTxTotalRDICells | read-only | current | Total number of RDI cells transmitted on a VC. |
| 1.3.6.1.4.1.164.12.4.2.3.3.1.18 | ColumnatmSuPortAtmVclStatsTxTotalLoopbackResponses | read-only | current | Total number of loopback responses that were transmitted as a result of loopback requests received. |
| 1.3.6.1.4.1.164.12.4.2.3.3.1.19 | ColumnatmSuPortAtmVclStatsTxTotalLoopbackRequests | read-only | current | Total number of loopback requests that were transmitted by the ACE20 on a VC. |
| 1.3.6.1.4.1.164.12.4.2.3.3.1.20 | ColumnatmSuPortAtmVclStatsRxTotalLoopbackResponses | read-only | current | Total number of loopback responses that were received as a result of loopback transmitted by the ACE20. |
| 1.3.6.1.4.1.164.12.4.2.4 | NodeatmSuPortFr | |||
| 1.3.6.1.4.1.164.12.4.2.4.1 | TableatmSuPortFrLportTable | not-accessible | current | The table Contains configuration parameters of the Frame-Relay port and has expansion to frLportTable in RFC1604 MIB. |
| 1.3.6.1.4.1.164.12.4.2.4.1.1 | RowatmSuPortFrLportEntry | not-accessible | current | An entry in the Frame Relay Logical Port Information table. |
| 1.3.6.1.4.1.164.12.4.2.4.1.1.1 | ColumnatmSuPortFrLportSNMPDlci | read-write | current | The SNMP Dlci of this entry. |
| 1.3.6.1.4.1.164.12.4.2.4.1.1.2 | ColumnatmSuPortFrLportSNMPStatus | read-write | current | value indicates if SNMP over FR is available for management. |
| 1.3.6.1.4.1.164.12.4.2.4.1.1.3 | ColumnatmSuPortFrLportVCSigProtocol | read-write | current | The value of this object identifies the Local In-Channel Signaling Protocol that is used for this frame relay UNI/NNI logical port. |
| 1.3.6.1.4.1.164.12.4.2.4.1.1.4 | ColumnatmSuPortFrLportVCSigProcedure | read-write | current | The value of this object identifies the Local In-Channel Signaling Procedure that is used for this UNI/NNI logical port. The UNI/NNI logical port can be perfor… |
| 1.3.6.1.4.1.164.12.4.2.4.1.1.5 | ColumnatmSuPortFrLportCLLM | read-write | current | indicate if the configuration is supporting CLLM ( Consolidated Link Layer Management ) . |
| 1.3.6.1.4.1.164.12.4.2.4.1.1.6 | ColumnatmSuPortFrLportSNMPIp | read-write | current | The interface IP address of this entry. |
| 1.3.6.1.4.1.164.12.4.2.4.2 | TableatmSuPortFrPvcEndptTable | not-accessible | current | The table contains additional information about the Frame Relay end point. |
| 1.3.6.1.4.1.164.12.4.2.4.2.1 | RowatmSuPortFrPvcEndptEntry | not-accessible | current | An entry for FR end-point statistics ( expansion to RFC 1604 ). |
| 1.3.6.1.4.1.164.12.4.2.4.2.1.1 | ColumnatmSuPortFrPvcEndptTxFECNs | read-only | current | number of frames transmited with FECN ( Forward Explicit Congestion Notification ). |
| 1.3.6.1.4.1.164.12.4.2.4.2.1.2 | ColumnatmSuPortFrPvcEndptTxBECNs | read-only | current | number of frames transmited with BECN ( Backward Explicit Congestion Notification ). |
| 1.3.6.1.4.1.164.12.4.2.4.2.1.3 | ColumnatmSuPortFrPvcEndptTxDEs | read-only | current | number of frames transmited with the DE ( Discarded Eligible ) bit set. |
| 1.3.6.1.4.1.164.12.4.2.4.2.1.4 | ColumnatmSuPortFrPvcEndptRxFECNs | read-only | current | number of frames received with FECN ( Forward Explicit Congestion Notification ). |
| 1.3.6.1.4.1.164.12.4.2.4.2.1.5 | ColumnatmSuPortFrPvcEndptRxBECNs | read-only | current | number of frames received with BECN ( Backward Explicit Congestion Notification ). |
| 1.3.6.1.4.1.164.12.4.2.5 | NodeatmSuPortDxi | |||
| 1.3.6.1.4.1.164.12.4.2.5.1 | TableatmSuPortDxiConfTable | not-accessible | current | This table contains ATM-DXI managment address (DFA) ending at the local agent. only LMI managment supported for ATM-DXI. |
| 1.3.6.1.4.1.164.12.4.2.5.1.1 | RowatmSuPortDxiConfEntry | not-accessible | current | This object contains information about agent Dxi interface. |
| 1.3.6.1.4.1.164.12.4.2.5.1.1.1 | ColumnatmSuPortDxiPortMode | read-write | current | This object identifies the dxi mode being used by the atm dxi port. |
| 1.3.6.1.4.1.164.12.4.2.5.1.1.2 | ColumnatmSuPortDxiSigProtocol | read-write | current | This value indicates if we using LMI signalling protocol or not using any signalling . |
| 1.3.6.1.4.1.164.12.4.2.5.1.1.3 | ColumnatmSuPortDxiSigDfa | read-write | current | The Signalling Dfa address . the default LMI Dfa defined for LMI by the AtmForum is 0. |
| 1.3.6.1.4.1.164.12.4.2.6 | TableatmSuPortCmdTable | not-accessible | current | General commands to be done on agent's ports. |
| 1.3.6.1.4.1.164.12.4.2.6.1 | RowatmSuPortCmdEntry | not-accessible | current | This object contains entry information. |
| 1.3.6.1.4.1.164.12.4.2.6.1.1 | ColumnatmSuResetPortStatsCmd | read-write | current | reset statistics of port. |
| 1.3.6.1.4.1.164.12.4.2.6.1.2 | ColumnatmSuResetConnsStatsCmd | read-write | current | reset statistics of all cross connections attached to this port. set-request is allowed only on the DATA Ports . for get-request value is always 'off' |
| 1.3.6.1.4.1.164.12.4.2.7 | NodeatmSuPortEther | |||
| 1.3.6.1.4.1.164.12.4.2.7.1 | TableatmSuPortEtherTable | not-accessible | current | The table Contains configuration parameters of the Ethernet port. |
| 1.3.6.1.4.1.164.12.4.2.7.1.1 | RowatmSuPortEtherEntry | not-accessible | current | An entry in the Ethernet Port Information table. |
| 1.3.6.1.4.1.164.12.4.2.7.1.1.1 | ColumnatmSuPortEtherIP | read-write | current | The interface IP address for SNMP requests. |
| 1.3.6.1.4.1.164.12.4.2.7.1.1.2 | ColumnatmSuPortEtherMask | read-write | current | The interface IP address mask for SNMP requests. |
| 1.3.6.1.4.1.164.12.4.2.7.1.1.3 | ColumnatmSuPortEtherDefaultGateWayIp | read-write | current | The Ethernet bridge default gateway IP address. |
| 1.3.6.1.4.1.164.12.4.2.7.1.1.4 | ColumnatmSuPortEtherDefaultCrossConnectId | read-write | current | Default Cross Connect Id. |
| 1.3.6.1.4.1.164.12.4.2.7.1.1.5 | ColumnatmSuPortEtherDefaultGatewayStatus | read-write | current | Default Gateway Status. |
| 1.3.6.1.4.1.164.12.4.2.7.1.1.6 | ColumnatmSuPortEtherSNMPStatus | read-write | current | The value indicates if the SNMP of Ethernet bridge interface is available for management. |
| 1.3.6.1.4.1.164.12.4.2.7.1.1.7 | ColumnatmSuPortEtherFragmentation | read-write | current | Fragmentation. When application is not router value must be 'notApplicable'. |
| 1.3.6.1.4.1.164.12.4.2.7.1.1.8 | ColumnatmSuPortEtherRIPMode | read-write | current | RIP Mode. When application is not router value must be 'notApplicable'. |
| 1.3.6.1.4.1.164.12.4.2.7.1.1.9 | ColumnatmSuPortEtherBridgingMode | read-write | current | Bridging mode can be one of the following: ATM <> Ethernet - Bridging is between the Ethernet port and the ATM port (there is no bridging between VCs). ATM <> … |
| 1.3.6.1.4.1.164.12.4.2.7.1.1.10 | ColumnatmSuPortEtherARPTimeout | read-write | current | ARP Timeout. When application is not router or when this object is not applicable, value must be 0. |
| 1.3.6.1.4.1.164.12.4.2.7.1.1.11 | ColumnatmSuPortEtherAgingTime | read-write | current | The timeout period in seconds for aging out stored information. valid values are 10...1000000. The value of (0) has the special meaning - not applicable. |
| 1.3.6.1.4.1.164.12.4.2.7.1.1.12 | ColumnatmSuPortEtherPppOEEnable | read-write | current | Enable or Disable transparent PPP over ethernet bridge. When PPP over Ethernet is enabled, non PPP traffic is blocked by the bridge. |
| 1.3.6.1.4.1.164.12.4.2.7.1.1.13 | ColumnatmSuPortEtherStatus | read-write | current | This object allows user to add/remove entries to/from this table. It will be supported only by certain devices. destroy - may not be possible for certain inter… |
| 1.3.6.1.4.1.164.12.4.3 | NodeatmSuCrossConnect | |||
| 1.3.6.1.4.1.164.12.4.3.1 | NodeatmSuCrossConnectAtmFr | |||
| 1.3.6.1.4.1.164.12.4.3.1.1 | NodeatmSuCrossConnectAtmFrDescriptor | |||
| 1.3.6.1.4.1.164.12.4.3.1.1.1 | NodeatmFrCrossConnectNetwork | |||
| 1.3.6.1.4.1.164.12.4.3.1.1.2 | NodeatmFrCrossConnectService | |||
| 1.3.6.1.4.1.164.12.4.3.1.2 | TableatmFrDescrTable | not-accessible | current | This table contains information on ATM to FR Connection descriptor types, and their associated parameters. |
| 1.3.6.1.4.1.164.12.4.3.1.2.1 | RowatmFrDescrEntry | not-accessible | current | This list contains ATM to FR Connection descriptor type, and its associated parameters. |
| 1.3.6.1.4.1.164.12.4.3.1.2.1.1 | ColumnatmFrDescrIndex | read-only | current | This object is used to identify the row index of the ATM to FR connection descriptor table. |
| 1.3.6.1.4.1.164.12.4.3.1.2.1.2 | ColumnatmFrDescrType | read-create | current | The value of this object identifies the type of the ATM to FR Connection descriptor. The type may indicate Network connection descriptor or a Service connectio… |
| 1.3.6.1.4.1.164.12.4.3.1.2.1.3 | ColumnatmFrDescrClp2De | read-create | current | The first parameter of the ATM to FR Connection descriptor used according to the value of atmFrDescrType. |
| 1.3.6.1.4.1.164.12.4.3.1.2.1.4 | ColumnatmFrDescrDe2Clp | read-create | current | The second parameter of the ATM to FR Connection descriptor used according to the value of atmFrDescrType. |
| 1.3.6.1.4.1.164.12.4.3.1.2.1.5 | ColumnatmFrDescrFecn2Efci | read-create | current | The third parameter of the ATM to FR Connection descriptor used according to the value of atmFrDescrType. |
| 1.3.6.1.4.1.164.12.4.3.1.2.1.6 | ColumnatmFrDescrMappingMode | read-create | current | The fourth parameter of the ATM to FR Connection descriptor used according to the value of atmFrDescrType. |
| 1.3.6.1.4.1.164.12.4.3.1.2.1.7 | ColumnatmFrDescrRowStatus | read-create | current | This object is used to create, modify or delete a row in this table. |
| 1.3.6.1.4.1.164.12.4.3.1.3 | ScalaratmSuCrossConnectAtmFrIndexNext | read-only | current | This object contains an appropriate value to be used for atmFrCnfgCrossConnectIndex when creating entries in the atmFrCnfgTable. The value 0 indicates that no … |
| 1.3.6.1.4.1.164.12.4.3.1.4 | TableatmFrCnfgTable | not-accessible | current | This table defines virtual connections between ATM and Frame Relay endpoints. |
| 1.3.6.1.4.1.164.12.4.3.1.4.1 | RowatmFrCnfgEntry | not-accessible | current | An entry defines virtual connection between ATM and Frame Relay endpoint. |
| 1.3.6.1.4.1.164.12.4.3.1.4.1.1 | ColumnatmFrCnfgCrossConnectIndex | read-only | current | A unique value to identify this cross-connect. |
| 1.3.6.1.4.1.164.12.4.3.1.4.1.2 | ColumnatmFrCnfgAtmIfIndex | read-only | current | The ifIndex associated to the ATM interface. |
| 1.3.6.1.4.1.164.12.4.3.1.4.1.3 | ColumnatmFrCnfgAtmVpi | read-only | current | The Vpi number of the ATM end point. |
| 1.3.6.1.4.1.164.12.4.3.1.4.1.4 | ColumnatmFrCnfgAtmVci | read-only | current | The Vci number of the ATM end point. |
| 1.3.6.1.4.1.164.12.4.3.1.4.1.5 | ColumnatmFrCnfgFrIfIndex | read-only | current | The ifIndex associated to the Frame Relay interface. |
| 1.3.6.1.4.1.164.12.4.3.1.4.1.6 | ColumnatmFrCnfgDlci | read-only | current | The DLCI number of the FR end point. |
| 1.3.6.1.4.1.164.12.4.3.1.4.1.7 | ColumnatmFrCnfgAdminStatus | read-create | current | This object indicates the connection status requested by the user. |
| 1.3.6.1.4.1.164.12.4.3.1.4.1.8 | ColumnatmFrCnfgOperStatus | read-only | current | This object indicates the Operational status of the connection. |
| 1.3.6.1.4.1.164.12.4.3.1.4.1.9 | ColumnatmFrCnfgLastChange | read-only | current | The value of sysUpTime at the time the ATM to FR connection entered its mandatory operational state. If the mandatory state was entered prior to the last re-in… |
| 1.3.6.1.4.1.164.12.4.3.1.4.1.10 | ColumnatmFrCnfgMappingDescrIndex | read-create | current | The value of this object identifies the row in the atmFrDescrTable. |
| 1.3.6.1.4.1.164.12.4.3.1.4.1.11 | ColumnatmFrCnfgSscsDlci | read-create | current | The DLCI number given to the SSCS Sub-layer for network interworking only ( the default value is 'atmFrCnfgDlci' ). for Service Interworking do not implement t… |
| 1.3.6.1.4.1.164.12.4.3.1.4.1.12 | ColumnatmFrCnfgTrafficDescrIndex | read-create | current | The value of this object identifies the row in the atmTrafficDescrParamTable which applies to the transmit direction of the VCL. note :setting this value is al… |
| 1.3.6.1.4.1.164.12.4.3.1.4.1.13 | ColumnatmFrCnfgPriority | read-create | current | This object define the priority of connection. The first parameter affects the transmition of cells in Conjested network is the bitRate( Cbr has the highest pr… |
| 1.3.6.1.4.1.164.12.4.3.1.4.1.14 | ColumnatmFrCnfgRowStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. |
| 1.3.6.1.4.1.164.12.4.3.1.4.1.15 | ColumnatmFrCnfgAllocatedBuffers | read-create | current | This object enables user to limit the amount of buffers used by the connection. The limit set by this object will give the effect of a virtual buffer pool per … |
| 1.3.6.1.4.1.164.12.4.3.1.5 | ScalaratmFrMaxMany2OneConnsPerVcc | read-only | current | The Maximum Number of many2one cross-connect connections allowed per Vcc . |
| 1.3.6.1.4.1.164.12.4.3.2 | NodeatmSuCrossConnectAtmDxi | |||
| 1.3.6.1.4.1.164.12.4.3.2.1 | ScalaratmSuCrossConnectAtmDxiIndexNext | read-only | current | This object contains an appropriate value to be used for atmDxiCnfgCrossConnectIndex when creating entries in the atmDxiCnfgTable. The value 0 indicates that n… |
| 1.3.6.1.4.1.164.12.4.3.2.2 | TableatmDxiCnfgTable | not-accessible | current | This table defines virtual connections between ATM and ATM-DXI endpoints. |
| 1.3.6.1.4.1.164.12.4.3.2.2.1 | RowatmDxiCnfgEntry | not-accessible | current | An entry defines virtual connection between ATM and ATM-DXI endpoint. |
| 1.3.6.1.4.1.164.12.4.3.2.2.1.1 | ColumnatmDxiCnfgCrossConnectIndex | read-only | current | A unique value to identify this cross-connect. |
| 1.3.6.1.4.1.164.12.4.3.2.2.1.2 | ColumnatmDxiCnfgAtmIfIndex | read-only | current | The ifIndex associated to the ATM interface. |
| 1.3.6.1.4.1.164.12.4.3.2.2.1.3 | ColumnatmDxiCnfgAtmVpi | read-only | current | The Vpi number of the ATM end point. |
| 1.3.6.1.4.1.164.12.4.3.2.2.1.4 | ColumnatmDxiCnfgAtmVci | read-only | current | The Vci number of the ATM end point. |
| 1.3.6.1.4.1.164.12.4.3.2.2.1.5 | ColumnatmDxiCnfgDxiIfIndex | read-only | current | The ifIndex associated to the atm-dxi interface. |
| 1.3.6.1.4.1.164.12.4.3.2.2.1.6 | ColumnatmDxiCnfgDfa | read-only | current | The DFA number of the DXI end point. |
| 1.3.6.1.4.1.164.12.4.3.2.2.1.7 | ColumnatmDxiCnfgAdminStatus | read-create | current | The requested state of the ATM to DXI connection. |
| 1.3.6.1.4.1.164.12.4.3.2.2.1.8 | ColumnatmDxiCnfgOperStatus | read-only | current | The real operational status of the ATM to DXI connection. |
| 1.3.6.1.4.1.164.12.4.3.2.2.1.9 | ColumnatmDxiCnfgLastChange | read-only | current | The value of sysUpTime at the time the ATM to DXI connection entered its mandatory operational state. If the mandatory state was entered prior to the last re-i… |
| 1.3.6.1.4.1.164.12.4.3.2.2.1.10 | ColumnatmDxiCnfgTrafficDescrIndex | read-create | current | The value of this object identifies the row in the atmTrafficDescrParamTable which applies to the transmit direction of the VCL. |
| 1.3.6.1.4.1.164.12.4.3.2.2.1.11 | ColumnatmDxiCnfgPriority | read-create | current | This object define the priority of connection. The first parameter affects the transmition of cells in Conjested network is the bitRate( Cbr has the highest pr… |
| 1.3.6.1.4.1.164.12.4.3.2.2.1.12 | ColumnatmDxiCnfgRowStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. |
| 1.3.6.1.4.1.164.12.4.3.3 | NodeatmSuAtmCbr | |||
| 1.3.6.1.4.1.164.12.4.3.3.1 | TableatmCbrCnfgTable | not-accessible | current | This table defines AAL1 virtual connections (not CES) between ATM port and DS1-CBR port. |
| 1.3.6.1.4.1.164.12.4.3.3.1.1 | RowatmCbrCnfgEntry | not-accessible | current | An entry defines virtual connection between ATM port and DS1-CBR port. |
| 1.3.6.1.4.1.164.12.4.3.3.1.1.1 | ColumnatmCbrCnfgAtmIfIndex | read-only | current | The ifIndex associated to the ATM interface. |
| 1.3.6.1.4.1.164.12.4.3.3.1.1.2 | ColumnatmCbrCnfgAtmVpi | read-only | current | The Vpi number of the ATM end point. |
| 1.3.6.1.4.1.164.12.4.3.3.1.1.3 | ColumnatmCbrCnfgAtmVci | read-only | current | The Vci number of the ATM end point. |
| 1.3.6.1.4.1.164.12.4.3.3.1.1.4 | ColumnatmCbrCnfgCbrIfIndex | read-only | current | The ifIndex associated to the logical interface of DS0s bundle or to ifIndex of one of the data ports. |
| 1.3.6.1.4.1.164.12.4.3.3.1.1.5 | ColumnatmCbrCnfgAdminStatus | read-create | current | The requested status of the connection. |
| 1.3.6.1.4.1.164.12.4.3.3.1.1.6 | ColumnatmCbrCnfgOperStatus | read-only | current | The real operational status of the connection. |
| 1.3.6.1.4.1.164.12.4.3.3.1.1.7 | ColumnatmCbrCnfgLastChange | read-only | current | The value of sysUpTime at the time the ATM to CBR connection entered its mandatory operational state. If the mandatory state was entered prior to the last re-i… |
| 1.3.6.1.4.1.164.12.4.3.3.1.1.8 | ColumnatmCbrCnfgAAL1Signalling | read-create | current | Not in use. Must be always 'off'. |
| 1.3.6.1.4.1.164.12.4.3.3.1.1.9 | ColumnatmCbrCnfgRxTimeSlots | read-create | current | This value indicates the time-slots used by this connection for receiving. It uses 32 bits for E1 and low 24 bits for T1. each bit represents a time slot for r… |
| 1.3.6.1.4.1.164.12.4.3.3.1.1.10 | ColumnatmCbrCnfgRxBytesPerCell | read-create | current | number of bytes to be receive in order per cell to low the delay. |
| 1.3.6.1.4.1.164.12.4.3.3.1.1.11 | ColumnatmCbrCnfgTxTimeSlots | read-create | current | This value indicates the time-slots used by this connection for receiving. It uses 32 bits for E1 and low 24 bits for T1. each bit represents a time slot for r… |
| 1.3.6.1.4.1.164.12.4.3.3.1.1.12 | ColumnatmCbrCnfgTxBytesPerCell | read-create | current | number of bytes to be transmit in order per cell to low the delay. |
| 1.3.6.1.4.1.164.12.4.3.3.1.1.13 | ColumnatmCbrCnfgParity | read-create | current | Controls the use of pointer parity when using the STRUCTURED or STRUCTURED WITH POINTER connection type. as defined by atmCbrCnfgService. ON - Pointer parity b… |
| 1.3.6.1.4.1.164.12.4.3.3.1.1.14 | ColumnatmCbrCnfgRowStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. |
| 1.3.6.1.4.1.164.12.4.3.3.1.1.15 | ColumnatmCbrCnfgService | read-create | current | Define if DSx service is structured or unstructured. A structured(3) interface is some nx64Kbps. (n x DS0 = n Time Slots) An unstructured (2) interface is full… |
| 1.3.6.1.4.1.164.12.4.3.3.2 | TableatmCESConfExtnsTable | not-accessible | current | This table defines virtual connections between ATM port and DS1-CBR port. |
| 1.3.6.1.4.1.164.12.4.3.3.2.1 | RowatmCESConfExtnsEntry | not-accessible | current | An entry defines virtual connection between ATM port and DS1-CBR port. |
| 1.3.6.1.4.1.164.12.4.3.3.2.1.1 | ColumnatmCESLastChange | read-only | current | The value of sysUpTime at the time the ATM to CBR connection entered its mandatory operational state. If the mandatory state was entered prior to the last re-i… |
| 1.3.6.1.4.1.164.12.4.3.3.2.1.2 | ColumnatmCESRxBytesPerCell | read-write | current | Number of bytes to be received per cell, in order to decrease the delay. |
| 1.3.6.1.4.1.164.12.4.3.3.2.1.3 | ColumnatmCESTxBytesPerCell | read-write | current | Number of bytes to be transmitted per cell, in order to decrease the delay. |
| 1.3.6.1.4.1.164.12.4.3.3.2.1.4 | ColumnatmCESAal1Type | read-write | current | Type of CBR connection: CES , DBCES or transparent . |
| 1.3.6.1.4.1.164.12.4.3.3.2.1.5 | ColumnatmCESParity | read-write | current | Indicate if we'll add even parity to the pointer of the structure of CES. |
| 1.3.6.1.4.1.164.12.4.3.3.2.1.6 | ColumnatmCESSigType | read-write | current | type of signalling for a DBCES connection. Must be 'other' for CES connection. |
| 1.3.6.1.4.1.164.12.4.3.3.2.1.7 | ColumnatmCESSigABBits | read-write | current | This attribute is applicable only when value of atmCESSigType is other. Represents the AB bits for Rx/Tx and their masks in this way: bits 7..6: Tx AB bits val… |
| 1.3.6.1.4.1.164.12.4.3.3.2.1.8 | ColumnatmCESConnectionName | read-write | current | The Connection's name. |
| 1.3.6.1.4.1.164.12.4.3.3.2.1.9 | ColumnatmCESTcPattern | read-write | current | Trunk conditioning data pattern to be sent upon a DS0 fail. Range is 0x0..0xFF. |
| 1.3.6.1.4.1.164.12.4.3.4 | NodeatmSuCrossConnectAtmEther | |||
| 1.3.6.1.4.1.164.12.4.3.4.1 | ScalaratmSuCrossConnectAtmEtherIndexNext | read-only | current | This object contains an appropriate value to be used for atmEtherCnfgCrossConnectIndex when creating entries in the atmEtherCnfgTable. The value 0 indicates th… |
| 1.3.6.1.4.1.164.12.4.3.4.2 | TableatmEtherCnfgTable | not-accessible | current | This table defines virtual connections between ATM and ATM-BridgedEthernet endpoints. |
| 1.3.6.1.4.1.164.12.4.3.4.2.1 | RowatmEtherCnfgEntry | not-accessible | current | An entry defines virtual connection between ATM and ATM-Ethernet endpoint. |
| 1.3.6.1.4.1.164.12.4.3.4.2.1.1 | ColumnatmEtherCnfgCrossConnectIndex | read-only | current | A unique value to identify this cross-connect. |
| 1.3.6.1.4.1.164.12.4.3.4.2.1.2 | ColumnatmEtherCnfgAtmIfIndex | read-only | current | The ifIndex associated to the ATM interface. |
| 1.3.6.1.4.1.164.12.4.3.4.2.1.3 | ColumnatmEtherCnfgAtmVpi | read-only | current | The Vpi number of the ATM end point. |
| 1.3.6.1.4.1.164.12.4.3.4.2.1.4 | ColumnatmEtherCnfgAtmVci | read-only | current | The Vci number of the ATM end point. |
| 1.3.6.1.4.1.164.12.4.3.4.2.1.5 | ColumnatmEtherCnfgEtherIfIndex | read-only | current | The ifIndex associated to the atm-Ethernet interface. |
| 1.3.6.1.4.1.164.12.4.3.4.2.1.6 | ColumnatmEtherCnfgMacAddr | read-only | deprecated | The DFA number of the Ethernet end point. |
| 1.3.6.1.4.1.164.12.4.3.4.2.1.7 | ColumnatmEtherCnfgAdminStatus | read-create | current | The requested state of the ATM to Ethernet connection. |
| 1.3.6.1.4.1.164.12.4.3.4.2.1.8 | ColumnatmEtherCnfgOperStatus | read-only | current | The real operational status of the ATM to Ethernet connection. |
| 1.3.6.1.4.1.164.12.4.3.4.2.1.9 | ColumnatmEtherCnfgLastChange | read-only | current | The value of sysUpTime at the time the ATM to Ethernet connection entered its current operational state. If the current state was entered prior to the last re-… |
| 1.3.6.1.4.1.164.12.4.3.4.2.1.10 | ColumnatmEtherCnfgTrafficDescrIndex | read-create | current | The value of this object identifies the row in the atmTrafficDescrParamTable which applies to the transmit direction of the VCL. |
| 1.3.6.1.4.1.164.12.4.3.4.2.1.11 | ColumnatmEtherCnfgEncapsulationMode | read-create | deprecated | This object define the encapsulation type requested for the connection. it indicates if we transfer the Ethernet frame to the atm side without the Crc32- AtmBr… |
| 1.3.6.1.4.1.164.12.4.3.4.2.1.12 | ColumnatmEtherCnfgPriority | read-create | current | This object define the priority of connection. The first parameter affects the transmition of cells in Conjested network is the Service Category( Cbr has the h… |
| 1.3.6.1.4.1.164.12.4.3.4.2.1.13 | ColumnatmEtherCnfgRowStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. |
| 1.3.6.1.4.1.164.12.4.3.4.2.1.14 | ColumnatmEtherCnfgRouterIP | read-create | current | The interface IP address for SNMP requests. |
| 1.3.6.1.4.1.164.12.4.3.4.2.1.15 | ColumnatmEtherCnfgRouterMask | read-create | current | The interface IP address mask for SNMP requests. |
| 1.3.6.1.4.1.164.12.4.3.4.2.1.16 | ColumnatmEtherCnfgRouterFragmentation | read-create | current | Fragmentation. When application is not router value must be 'notApplicable'. |
| 1.3.6.1.4.1.164.12.4.3.4.2.1.17 | ColumnatmEtherCnfgRouterRIPMode | read-create | current | RIP Mode. When application is not router value must be 'notApplicable'. |
| 1.3.6.1.4.1.164.12.4.3.4.2.1.18 | ColumnatmEtherCnfgRouterMTU | read-create | deprecated | . |
| 1.3.6.1.4.1.164.12.4.3.4.2.1.19 | ColumnatmEtherCnfgPPPEncapsulation | read-create | current | This object define the encapsulation type requested for the connection. rfc1483 - Multiprotocol Encapsulation over ATM Adaptation Layer 5 (no PPP), LLC Muxed. … |
| 1.3.6.1.4.1.164.12.4.3.4.2.1.20 | ColumnatmEtherCnfgAllocatedBuffers | read-create | current | This object enables user to limit the amount of buffers used by the connection. The limit set by this object will give the effect of a virtual buffer pool per … |
| 1.3.6.1.4.1.164.12.4.3.4.2.1.21 | ColumnatmEtherCnfgPauseTrigger | read-create | current | Enable/Disable LAN Pause triger from WAN connection |
| 1.3.6.1.4.1.164.12.4.3.5 | NodeatmSuCrossConnectTranslate | |||
| 1.3.6.1.4.1.164.12.4.3.5.1 | TableatmTranslateTable | not-accessible | current | This table translates the three of AtmIfIndex,AtmVpi,AtmVci to ifIndex of the interface on the user port's side. |
| 1.3.6.1.4.1.164.12.4.3.5.1.1 | RowatmTranslateEntry | not-accessible | current | An entry includes the User side interface's ifIndex of any virtual connection along with the ATM connection indices. |
| 1.3.6.1.4.1.164.12.4.3.5.1.1.1 | ColumnatmTranslateAtmIfIndex | read-only | current | The ifIndex associated to the ATM interface. |
| 1.3.6.1.4.1.164.12.4.3.5.1.1.2 | ColumnatmTranslateAtmVpi | read-only | current | The Vpi number of the ATM end point. |
| 1.3.6.1.4.1.164.12.4.3.5.1.1.3 | ColumnatmTranslateAtmVci | read-only | current | The Vci number of the ATM end point. |
| 1.3.6.1.4.1.164.12.4.3.5.1.1.4 | ColumnatmTranslateUserIfIndex | read-only | current | The ifIndex associated to the user interface. |
| 1.3.6.1.4.1.164.12.5 | NoderadAtmIma | |||
| 1.3.6.1.4.1.164.12.5.1 | ScalarimaPrimaryClk | read-write | current | Clock source to be transmitted to the user side, where user module is in 'External' clock source. |
| 1.3.6.1.4.1.164.12.5.2 | TableimaXLinkTable | not-accessible | current | The IMA Link Status and Configuration table. This table contains additional objects for the link table. |
| 1.3.6.1.4.1.164.12.5.2.1 | RowimaXLinkEntry | not-accessible | current | An entry in the IMA Link table. |
| 1.3.6.1.4.1.164.12.5.2.1.1 | ColumnimaLinkDirection | read-write | current | the Link direction. |
| 1.3.6.1.4.1.164.12.5.2.1.2 | ColumnimaLinkItcLBClkSrc | read-write | current | Clock source for the current Tx-line. |
| 1.3.6.1.4.1.164.12.5.2.1.3 | ColumnimaLinkActivation | read-write | current | IMA Link activation at ATM layer. |
| 1.3.6.1.4.1.164.12.5.3 | TableimaXGroupTable | not-accessible | current | The IMA group Status and Configuration table. This table contains additional objects for the Group table. |
| 1.3.6.1.4.1.164.12.5.3.1 | RowimaXGroupEntry | not-accessible | current | An entry in the IMA Group table. |
| 1.3.6.1.4.1.164.12.5.3.1.1 | ColumnimaGroupVersion | read-write | current | IMA Version. |
| 1.3.6.1.4.1.164.12.5.3.1.2 | ColumnimaGroupCtcTxClkSrc | read-write | current | The source of the transmitted, common, Clock Source. Applicable if imaGroupNeTxClkMode=ctc(1). Automatic - Dynamic source, taken from the currently reference l… |
| 1.3.6.1.4.1.164.12.5.3.1.3 | ColumnimaGroupCtcTxClkSrcPort | read-write | current | This parameter is valid only when imaGroupCtcTxClkSrc=loopback. The value may be any port identifier. |
| 1.3.6.1.4.1.164.12.5.3.1.4 | ColumnimaGroupRestart | read-write | current | off(1)- default state. After on(2) operation ends, value should be automatically set to off(1). on(2) - restarts the IMA Group State Machine (GSM) and the Rx\T… |
| 1.3.6.1.4.1.164.12.5.3.1.5 | ColumnimaGroupType | read-write | current | This parameter defines the Type of IMA Group (which determines its Links Type). |
| 1.3.6.1.4.1.164.12.6 | NoderadAtmSignalingMonitor | |||
| 1.3.6.1.4.1.164.12.6.1 | ScalarsmSVCOperState | read-only | current | The SVC monitoring operational state. |
| 1.3.6.1.4.1.164.12.6.2 | ScalarsmSVCAdminStatus | read-write | current | The SVC monitoring status. |
| 1.3.6.1.4.1.164.12.6.3 | ScalarsmILMIMode | read-write | current | The ILMI operational Mode. |
| 1.3.6.1.4.1.164.12.6.4 | ScalarsmILMIStatus | read-only | current | ILMI protocol status (VCC 0,16). |
| 1.3.6.1.4.1.164.12.6.5 | ScalarsmUNIVersion | read-write | current | The UNI version that is used by both sides. |
| 1.3.6.1.4.1.164.12.6.6 | ScalarsmPolicing | read-write | current | The type of the police action performed on the cells transmitted from the user side to the network side. |
| 1.3.6.1.4.1.164.12.6.7 | ScalarsmSAALStatus | read-only | current | Signaling data link (VCC 0,5) status. |
| 1.3.6.1.4.1.164.12.6.8 | ScalarsmOpenedSesssions | read-only | current | The number of SVC sessions currently opened. |
| 1.3.6.1.4.1.164.12.6.9 | ScalarsmUserRejectedSessions | read-only | current | The number of sessions that the user side rejected to open. |
| 1.3.6.1.4.1.164.12.6.10 | ScalarsmNetworkRejectedSessions | read-only | current | The number of sessions that the Network side rejected. |
| 1.3.6.1.4.1.164.12.6.11 | ScalarsmHostRejectedSessions | read-only | current | The number of sessions that the device rejected to open. |
| 1.3.6.1.4.1.164.12.6.12 | ScalarsmVclILMISessionVpi | read-write | current | ILMI Keep alive session VPI channel. Default: 0. (VCI=16, fixed). |
| 1.3.6.1.4.1.164.12.7 | NodeatmLayer2 | |||
| 1.3.6.1.4.1.164.12.7.1 | TableatmLayer2XVclTable | not-accessible | current | This table is an extension of VCL table, which is created for each LAN VCC. |
| 1.3.6.1.4.1.164.12.7.1.1 | RowatmLayer2XVclEntry | not-accessible | current | Conceptual row in atmVclTable. This table augments the RFC2515 VCL table. |
| 1.3.6.1.4.1.164.12.7.1.1.1 | ColumnatmLayer2XVclConnMode | read-create | current | Each valid LAN VCC is either Main or Sub. This parameter is configured only once on creation of a LAN VCC. It can not be changed after creation. In order to ch… |
| 1.3.6.1.4.1.164.12.7.1.1.2 | ColumnatmLayer2XVclGroupIdx | read-only | current | The group identifier. A VCC Group identifier = 0 if the VCC was not associated with a group yet. This value is updated according to the group identifier set by… |
| 1.3.6.1.4.1.164.12.7.2 | TableatmLayer2GroupTable | not-accessible | current | This table contains groups and their members. A group is a bundle of VCCs, which acts as different queues. Main and Sub VCCs should have the same ATM slot and … |
| 1.3.6.1.4.1.164.12.7.2.1 | RowatmLayer2GroupEntry | not-accessible | current | Conceptual row in atmLayer2GroupTable. The indexes: ifIndex, atmVclVpi and atmVclVci indicate the Network ATM End-Point. Upon a group creation, one Main VCC mu… |
| 1.3.6.1.4.1.164.12.7.2.1.1 | ColumnatmLayer2GroupIdx | read-only | current | The group identifier. 0 is not a valid index. |
| 1.3.6.1.4.1.164.12.7.2.1.2 | ColumnatmLayer2GroupRowStatus | read-create | current | Creation/Deletion of rows in the table, and indication of the entry's status. |
| 1.3.6.1.4.1.164.12.7.2.1.3 | ColumnatmLayer2GroupConnMode | read-only | current | Each valid LAN VCC is either Main or Sub as configured in atmLayer2XVclTable. |
| 1.3.6.1.4.1.164.12.7.2.1.4 | ColumnatmLayer2GroupConnPriority | read-only | current | This parameter is configured by atmLayer2PriorityRx from atmLayer2PriorityTable. Each bit in the Octet represents a specific priority as follows: MSB 7 6 5 4 3… |
| 1.3.6.1.4.1.164.12.7.2.1.5 | ColumnatmLayer2GroupName | read-create | current | Group name. Configured by the user. The name is unique per system. For atmLayer2GroupIdx=0, the name will be null. |
| 1.3.6.1.4.1.164.12.7.3 | TableatmLayer2PriorityTable | not-accessible | current | This table maps all priorities inside a group. Several priorities might be mapped to the same VCC. Upon priority change, the agent will update the VCCs of the … |
| 1.3.6.1.4.1.164.12.7.3.1 | RowatmLayer2PriorityEntry | not-accessible | current | Conceptual row in atmLayer2PriorityTable. Each entry is a Network ATM End-Point per priority. Upon a group creation, all priorities are mapped to the Main VCC.… |
| 1.3.6.1.4.1.164.12.7.3.1.1 | ColumnatmLayer2PriorityGroupIdx | read-only | current | The group identifier. |
| 1.3.6.1.4.1.164.12.7.3.1.2 | ColumnatmLayer2PriorityRx | read-only | current | The priority values. The used values are 0-7, but since this value is part of the index of the table, and in order to avoid '0' as an index, the index syntax i… |
| 1.3.6.1.4.1.164.12.7.3.1.3 | ColumnatmLayer2PriorityIfIndex | read-create | current | ATM ifIndex of the network End-Point. |
| 1.3.6.1.4.1.164.12.7.3.1.4 | ColumnatmLayer2PriorityVclVpi | read-create | current | Vpi of the network End-Point. |
| 1.3.6.1.4.1.164.12.7.3.1.5 | ColumnatmLayer2PriorityVclVci | read-create | current | Vci of the network End-Point. |
| 1.3.6.1.4.1.164.12.7.4 | ScalaratmLayer2GroupIndexNext | read-only | current | This object contains an appropriate value to be used for atmLayer2GroupIdx when creating entries in the atmLayer2GroupTable. The value 0 indicates that no unas… |
| 1.3.6.1.4.1.164.12.7.5 | TableatmLayer2CfgTable | not-accessible | current | Bridge configuration Table. This table supports multi-bridge and bridge features within an ATM device. |
| 1.3.6.1.4.1.164.12.7.5.1 | RowatmLayer2CfgEntry | not-accessible | current | Conceptual row in atmLayer2CfgTable. Each entry in this table contains the bridging attributes for both Ethernet and ATM sides. The interface index is the Ethe… |
| 1.3.6.1.4.1.164.12.7.5.1.1 | ColumnatmLayer2CfgBridgingMode | read-write | current | Bridging mode can be one of the following: ATM <> Ethernet - Bridging is between the Ethernet port and the ATM port (there is no bridging between VCs). ATM <> … |
| 1.3.6.1.4.1.164.12.7.5.1.2 | ColumnatmLayer2CfgVlanMode | read-write | current | VLAN Mode. Upon Mode changing, all LAN VCCs will be deleted by the agent from all tables that include LAN VCCs. |
| 1.3.6.1.4.1.164.12.7.5.1.3 | ColumnatmLayer2CfgAtmAcceptableFrameType | read-write | current | The Frame Type that will be acceptable by the VCCs that are associated with this Ethernet port. Frames which don't match the selected type will be discarded. a… |
| 1.3.6.1.4.1.164.12.7.5.1.4 | ColumnatmLayer2CfgAtmIngressFiltering | read-write | current | For the VCCs that are associated with this Ethernet port, when this is true(1) the device will discard incoming frames for VLANs which do not include this Port… |
| 1.3.6.1.4.1.164.12.7.5.1.5 | ColumnatmLayer2CfgAtmTxFrameType | read-write | current | The Frame Type that will be transmitted by the VCCs that are associated with this Ethernet port. unTagged - The transmitted frames will be unTagged. tagged - T… |
| 1.3.6.1.4.1.164.12.7.5.1.6 | ColumnatmLayer2CfgEthAcceptableFrameType | read-write | current | The Frame Type that this Ethernet port will accept. (for ACE-52: the Frame Type that this Bridge will accept) This parameter is notApplicable for atmLayer2Vlan… |
| 1.3.6.1.4.1.164.12.7.5.1.7 | ColumnatmLayer2CfgBridgeAction | read-write | current | This object enables to perform the specified action on the selected port. |
| 1.3.6.1.4.1.164.12.7.5.1.8 | ColumnatmLayer2CfgLearningMode | read-write | current | This object specifies the mode of the learning process of a bridge. svl - Shared VLAN process. If an individual MAC Address is learned in one VLAN, this inform… |
| 1.3.6.1.4.1.164.12.7.5.1.9 | ColumnatmLayer2CfgAgingTime | read-write | current | The timeout period in seconds for aging out dynamically learned forwarding information. |
| 1.3.6.1.4.1.164.12.8 | NoderadAtmFr | |||
| 1.3.6.1.4.1.164.12.8.1 | TablefrAtmIwfXConnectionTable | not-accessible | current | This table is an extension of frAtmIwfXConnectionTable from RFC2955. |
| 1.3.6.1.4.1.164.12.8.1.1 | RowfrAtmIwfXConnectionEntry | not-accessible | current | Conceptual row in frAtmIwfXConnectionTable. This table augments the RFC2955. |
| 1.3.6.1.4.1.164.12.8.1.1.1 | ColumnfrAtmIwfXConnMode | read-create | current | FR IWF Mode. service - Service InterWorking (FRF.8), network - Network InterWorking (FRF.5). |
| 1.3.6.1.4.1.164.12.8.1.1.2 | ColumnfrAtmIwfXConnSscsDlci | read-create | current | This parameter is relevant for frAtmIwfXConnMode=network (FRF.5) only. This parameter allow configuration of the FR SSCS DLCI that is transferred to the remote… |
| 1.3.6.1.4.1.164.12.9 | NodeatmCes | |||
| 1.3.6.1.4.1.164.12.9.1 | NodeatmCesPerformance | |||
| 1.3.6.1.4.1.164.12.9.1.1 | TableatmCesAal1CurrentTable | not-accessible | current | The AAL1 Current table. |
| 1.3.6.1.4.1.164.12.9.1.1.1 | RowatmCesAal1CurrentEntry | not-accessible | current | An entry in the AAL1 Current table. |
| 1.3.6.1.4.1.164.12.9.1.1.1.1 | ColumnatmCesAal1CurrentIfIndex | read-only | current | The index of the AAL1 interface. It may be ifIndex. |
| 1.3.6.1.4.1.164.12.9.1.1.1.2 | ColumnatmCesAal1CurrentSeqErrors | read-only | current | The counter associated with the number of Discarded cells due to wrong sequence number, encountered by an AAL1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.9.1.1.1.3 | ColumnatmCesAal1CurrentHdrErrors | read-only | current | The counter associated with the number of Discarded cells due to bad AAL1 header error (including correctable and uncorrectable CRC, and bad parity), encounter… |
| 1.3.6.1.4.1.164.12.9.1.1.1.4 | ColumnatmCesAal1CurrentPointerReframes | read-only | current | The counter associated with the number of events in which a SDT pointer isn't where it is expected to be, and must be reacquired, encountered by an AAL1 interf… |
| 1.3.6.1.4.1.164.12.9.1.1.1.5 | ColumnatmCesAal1CurrentBufUnderflows | read-only | current | The counter associated with the number of buffer underflow events, encountered by an AAL1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.9.1.1.1.6 | ColumnatmCesAal1CurrentBufOverflows | read-only | current | The counter associated with the number of buffer overflow events, encountered by an AAL1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.9.1.2 | TableatmCesAal1IntervalTable | not-accessible | current | The AAL1 Interval table. |
| 1.3.6.1.4.1.164.12.9.1.2.1 | RowatmCesAal1IntervalEntry | not-accessible | current | An entry in the AAL1 Interval table. |
| 1.3.6.1.4.1.164.12.9.1.2.1.1 | ColumnatmCesAal1IntervalIfIndex | read-only | current | The index of the AAL1 interface. It may be ifIndex. |
| 1.3.6.1.4.1.164.12.9.1.2.1.2 | ColumnatmCesAal1IntervalNumber | read-only | current | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that … |
| 1.3.6.1.4.1.164.12.9.1.2.1.3 | ColumnatmCesAal1IntervalSeqErrors | read-only | current | The counter associated with the number of Discarded cells due to wrong sequence number, encountered by an AAL1 interface in one of the previous 96, individual … |
| 1.3.6.1.4.1.164.12.9.1.2.1.4 | ColumnatmCesAal1IntervalHdrErrors | read-only | current | The counter associated with the number of Discarded cells due to bad AAL1 header error (including correctable and uncorrectable CRC, plus bad parity), encounte… |
| 1.3.6.1.4.1.164.12.9.1.2.1.5 | ColumnatmCesAal1IntervalPointerReframes | read-only | current | The counter associated with the number of events in which a SDT pointer isn't where it is expected to be, and must be reacquired, encountered by an AAL1 interf… |
| 1.3.6.1.4.1.164.12.9.1.2.1.6 | ColumnatmCesAal1IntervalBufUnderflows | read-only | current | The counter associated with the number of buffer underflow events, encountered by an AAL1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.9.1.2.1.7 | ColumnatmCesAal1IntervalBufOverflows | read-only | current | The counter associated with the number of buffer overflow events, encountered by an AAL1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.9.2 | NodeatmCesConfiguration | |||
| 1.3.6.1.4.1.164.12.9.2.1 | TableatmCesXConfTable | not-accessible | current | This table is an extension of atmfCESConfTable table. |
| 1.3.6.1.4.1.164.12.9.2.1.1 | RowatmCesXConfEntry | not-accessible | current | Conceptual row in atmfCESConfTable. A new row is created in this table upon each new CES VCC creation. |
| 1.3.6.1.4.1.164.12.9.2.1.1.1 | ColumnatmCesXConfCBRMode | read-create | current | This parameter defines if to use Spaced or Normal CBR. Normal - TD will be allocated from the policing range (described in ACE2002 NMS SRS). The PCR is expande… |
| 1.3.6.1.4.1.164.12.10 | NoderadAtmRouter | |||
| 1.3.6.1.4.1.164.12.10.1 | TableatmIpoaLisIfMappingXTable | not-accessible | current | This table is an extension of a table from RFC 2320: ipoaLisIfMappingTable - The ATM Logical IP Subnet Interface Mapping Table. |
| 1.3.6.1.4.1.164.12.10.1.1 | RowatmIpoaLisIfMappingXEntry | not-accessible | current | Conceptual row in ipoaLisIfMappingTable. |
| 1.3.6.1.4.1.164.12.10.1.1.1 | ColumnatmIpoaLisIfMappingType | read-create | current | This object indicates the Mapping Type. |
| 1.3.6.1.4.1.164.12.10.1.1.2 | ColumnatmIpoaLisIfMappingIPAddress | read-create | current | This parameter is applicable for atmIpoaLisIfMappingTypeIP=static(2). This parameter is the IP Address assigned by the user when applicable. |
| 1.3.6.1.4.1.164.12.10.2 | ScalarradAtmRtrInAtmArpInterval | read-write | current | The time interval (in seconds) between sending of two InATMARP requests. |
| 1.3.6.1.4.1.164.12.10.3 | ScalarradAtmRtrInAtmArpAgingTime | read-write | current | The time (in seconds) that passes until an entry is deleted, unless this entry was previously updated by a new inATMARP request or response. This variable valu… |
| 1.3.6.1.4.1.164.14 | NoderadPw | |||
| 1.3.6.1.4.1.164.14.0 | NoderadPwNotifications | |||
| 1.3.6.1.4.1.164.14.1 | NoderadPwCfgObjects | |||
| 1.3.6.1.4.1.164.14.1.1 | NoderadPwGenCfgObjects | |||
| 1.3.6.1.4.1.164.14.1.1.1 | TablepwGenTable | not-accessible | current | This table contains general configuration for PW connection. |
| 1.3.6.1.4.1.164.14.1.1.1.1 | RowpwGenEntry | not-accessible | current | This table is indexed by pwIdx, the value of which is equal to the same index that was created for the associated entry in the PW Table (in the PW-STD-MIB)- th… |
| 1.3.6.1.4.1.164.14.1.1.1.1.1 | ColumnpwIdx | not-accessible | current | Index of this table. The value for this object is equal to the value of pwIndex from the pwTable of PW-STD-MIB |
| 1.3.6.1.4.1.164.14.1.1.1.1.2 | ColumnpwGenPeerIdx | read-write | current | This object indicates the Index of the Peer (as it is defined in the Peer Table), which terminated this PW. |
| 1.3.6.1.4.1.164.14.1.1.1.1.3 | ColumnpwGenAttachmentCircuit | read-write | current | This is a unique index within the ifTable. It represents the attached circuit interface (e.g ATM VC, HDLC) attached to this PW connection (from service initiat… |
| 1.3.6.1.4.1.164.14.1.1.1.1.4 | ColumnpwGenOutgoingInterface | read-write | current | This is a unique index within the ifTable. It represents the outgoing interface (towards the PSN ) attached to this PW connection. This object is applicable on… |
| 1.3.6.1.4.1.164.14.1.1.1.1.5 | ColumnpwGenOamMode | read-write | current | This objects defines whether OAM will be enabled on this PW. notApplicable(1) value will be used when PW type does not support OAM. |
| 1.3.6.1.4.1.164.14.1.1.1.1.6 | ColumnpwGenOamType | read-write | current | This objects defines the failure detection mechanism used on this PW. BFD - Bidirectional Forwarding Detection notApplicable(1) value will be used when pwGenOa… |
| 1.3.6.1.4.1.164.14.1.1.1.1.7 | ColumnpwGenSequenceNumberField | read-write | current | This object defines whether processing of Sequence Number field (ATM cell encapsulation) will be done by device, on this PW. |
| 1.3.6.1.4.1.164.14.1.1.1.1.8 | ColumnpwGenNextHopType | read-write | current | Indicates address type of the Next Hop. Not applicable for device with router. |
| 1.3.6.1.4.1.164.14.1.1.1.1.9 | ColumnpwGenNextHop | read-write | current | Not applicable (=0) when pwMplsEgressTunnelNextHopType=notApplicable. When applicable, represents ATM VC, Bridge Port, according to pwMplsEgressTunnelNextHopTy… |
| 1.3.6.1.4.1.164.14.1.1.1.1.10 | ColumnpwGenIpNextHop | read-write | current | This object defines local Next Hop IP Address for this PW. 0.0.0.0 - means - not applicable. This object is applicable only when pwGenNextHopType=ipV4 |
| 1.3.6.1.4.1.164.14.1.1.1.1.11 | ColumnpwGenMacNextHop | read-write | current | This object defines local Next Hop MAC Address for this PW. 0:0:0:0:0:0 - means - not applicable. This object is applicable only when pwGenNextHopType=bridgePo… |
| 1.3.6.1.4.1.164.14.1.1.1.1.12 | ColumnpwGenEnableVlanTag | read-write | current | This object enables or diables a VLAN tag on every transmitted paket via this PW connection |
| 1.3.6.1.4.1.164.14.1.1.1.1.13 | ColumnpwGenVlanId | read-write | current | This object indicates the VLAN ID tag attached to every transmitted packet via this PW connection. This entry is applicable only if pwGenEnableVlanTag=enabled … |
| 1.3.6.1.4.1.164.14.1.1.1.1.14 | ColumnpwGenVlanPriority | read-write | current | This object indicates the VLAN priority assigned to every transmitted packet via this PW connection. This entry is applicable only if pwGenEnableVlanTag=enable… |
| 1.3.6.1.4.1.164.14.1.1.1.1.15 | ColumnpwGenIpTos | read-write | current | This object indicates TOS field value for pw having pwPsnType= ip (3) |
| 1.3.6.1.4.1.164.14.1.1.1.1.16 | ColumnpwGenSourceUdpPort | read-write | current | This object indicates source UDP port (1...65535) value for pw having pwPsnType= ip (3) |
| 1.3.6.1.4.1.164.14.1.1.1.1.17 | ColumnpwGenSubType | read-write | current | This object indicates the PW Sub Type (i.e. Sub Type of 'pwType' from 'pwTable'). For ACE-3000 devices: It is applicable only when pwType = basicCesPsn(21). |
| 1.3.6.1.4.1.164.14.1.1.1.1.18 | ColumnpwGenSourceIpAddress | read-write | current | Source IP Address per PW |
| 1.3.6.1.4.1.164.14.1.1.1.1.19 | ColumnpwGenSourceIpMask | read-write | current | Source IP Mask per PW |
| 1.3.6.1.4.1.164.14.1.1.2 | ScalarpwGenTimeout | read-write | current | This object defines the Timeout period, measured in usec. This object is relevant only for ATM service. |
| 1.3.6.1.4.1.164.14.1.1.3 | ScalarpwGenMisorderWindowSize | read-write | current | This object defines the Window Size (in packets), in which the device will attempt to reorder packets. Packets having sequence number with gap greater than the… |
| 1.3.6.1.4.1.164.14.1.1.4 | ScalarpwGenFixMisorderSupport | read-write | current | This object defines whether the process of reorder, within the Window Size (pwGenMisorderWindowSize), should be activated or not. This object is relevant only … |
| 1.3.6.1.4.1.164.14.1.1.5 | TablepwGenLabelTable | not-accessible | current | This table defines supported range of PW labels. |
| 1.3.6.1.4.1.164.14.1.1.5.1 | RowpwGenLabelEntry | not-accessible | current | Entry in this table defines range of PW labels in the direction and type indicated by pwGenLabelType and pwGenLabelDirection. |
| 1.3.6.1.4.1.164.14.1.1.5.1.1 | ColumnpwGenLabelType | not-accessible | current | This object defines type of label. |
| 1.3.6.1.4.1.164.14.1.1.5.1.2 | ColumnpwGenLabelDirection | not-accessible | current | This object defines PW direction. |
| 1.3.6.1.4.1.164.14.1.1.5.1.3 | ColumnpwGenLabelMinValue | read-write | current | This object defines minimum value of PW labels, in the direction and type indicated by pwGenLabelType and pwGenLabelDirection. |
| 1.3.6.1.4.1.164.14.1.1.5.1.4 | ColumnpwGenLabelMaxValue | read-write | current | This object define maximum value of PW labels, in the direction and type indicated by pwGenLabelType and pwGenLabelDirection. |
| 1.3.6.1.4.1.164.14.1.1.6 | TablepeerTable | not-accessible | current | The Peer Table |
| 1.3.6.1.4.1.164.14.1.1.6.1 | RowpeerEntry | not-accessible | current | An entry in this table. |
| 1.3.6.1.4.1.164.14.1.1.6.1.1 | ColumnpeerIndex | not-accessible | current | This object represents the Peer Index. |
| 1.3.6.1.4.1.164.14.1.1.6.1.2 | ColumnpeerRowStatus | read-create | current | This object is used for creating, modifying and deleting a row of this table. |
| 1.3.6.1.4.1.164.14.1.1.6.1.3 | ColumnpeerAddressType | read-create | current | This object represents the Address Type of the Peer node. It should be set to 'unknown' if PE/PW maintenance protocol is not used and the address is unknown. |
| 1.3.6.1.4.1.164.14.1.1.6.1.4 | ColumnpeerAddress | read-create | current | This object represents the Peer node Address. of the PW/PE maintenance protocol entity. This object SHOULD contain a value of all zeroes if not applicable (pee… |
| 1.3.6.1.4.1.164.14.1.1.6.1.5 | ColumnpeerName | read-create | current | This object represents the Peer Name. |
| 1.3.6.1.4.1.164.14.1.1.6.1.6 | ColumnpeerNoOfUsages | read-only | current | This object indicates the number of times this Peer is used (by PWs, Egress LSP Tunnels etc). |
| 1.3.6.1.4.1.164.14.1.1.6.1.7 | ColumnpeerTargeted | read-create | current | This object indicates whether the Peer is configured as a Targeted Peer or not. |
| 1.3.6.1.4.1.164.14.1.1.6.1.8 | ColumnpeerNextHopAddressType | read-create | current | This object represents the Address Type of the Peer Next Hop node. It should be set to 'unknown' if the address is unknown. |
| 1.3.6.1.4.1.164.14.1.1.6.1.9 | ColumnpeerNextHopAddress | read-create | current | This object represents the Peer Next Hop node Address. This object SHOULD contain a value of all zeroes if not applicable (peerAddrType is 'unknown'). |
| 1.3.6.1.4.1.164.14.1.2 | NoderadPwPsnCfgObjects | |||
| 1.3.6.1.4.1.164.14.1.2.1 | NoderadPwPsnCfgMpls | |||
| 1.3.6.1.4.1.164.14.1.2.1.1 | TablepwMplsCfgTable | not-accessible | current | This table contains MPLS PSN related configuration for PW connection. |
| 1.3.6.1.4.1.164.14.1.2.1.1.1 | RowpwMplsCfgEntry | not-accessible | current | This table is indexed by pwIdx, the value of which is equal to the same index that was created for the associated entry in the PW Table (in the PW-STD-MIB)- th… |
| 1.3.6.1.4.1.164.14.1.2.1.1.1.1 | ColumnpwMplsCfgIngressTunnel | read-create | current | This object points to an entry of pwMplsIngressTunnelTable. Its value is equal to pwMplsIngressTunnelIndex |
| 1.3.6.1.4.1.164.14.1.2.1.1.1.2 | ColumnpwMplsCfgEgressTunnel | read-create | current | This object points to an entry of pwMplsEgressTunnelTable. Its value is equal to pwMplsEgressTunnelIndex. |
| 1.3.6.1.4.1.164.14.1.3 | NoderadPwServiceCfgObjects | |||
| 1.3.6.1.4.1.164.14.1.3.1 | NoderadPwServiceCfgTDMoIp | |||
| 1.3.6.1.4.1.164.14.1.3.1.1 | TablepwTDMoIpTable | not-accessible | current | This table contains TDMoIP Service related configuration for PW connection. |
| 1.3.6.1.4.1.164.14.1.3.1.1.1 | RowpwTDMoIpEntry | not-accessible | current | This table is indexed by pwIdx, the value of which is equal to the same index that was created for the associated entry in the PW Table (in the PW-STD-MIB)- th… |
| 1.3.6.1.4.1.164.14.1.3.1.1.1.1 | ColumnpwTDMoIpCfgIndex | read-write | current | Index to TDMoIP table below. Multiple TDMoIP PWs MAY share a single pwTDMoIpCfgEntry |
| 1.3.6.1.4.1.164.14.1.3.1.2 | ScalarpwTDMoIpIndexNext | read-only | current | This object contains an unused value for pwTDMoIpCfgTableIndex, or a zero to indicate that none exist. Negative values are not allowed, as they do not correspo… |
| 1.3.6.1.4.1.164.14.1.3.1.3 | TablepwTDMoIpCfgTable | not-accessible | current | This table contains TDM over IP service configuration for PW connection. |
| 1.3.6.1.4.1.164.14.1.3.1.3.1 | RowpwTDMoIpCfgEntry | not-accessible | current | This table is indexed by pwIdx, the value of which is equal to the same index that was created for the associated entry in the PW Table (in the PW-STD-MIB)- th… |
| 1.3.6.1.4.1.164.14.1.3.1.3.1.1 | ColumnpwTDMoIpCfgTableIndex | not-accessible | current | Index to an entry in this table |
| 1.3.6.1.4.1.164.14.1.3.1.3.1.2 | ColumnpwTDMoIpCfgRowStatus | read-create | current | Object used for creating, modifying, and deleting a row of this table. |
| 1.3.6.1.4.1.164.14.1.3.1.3.1.3 | ColumnpwTDMoIpCfgPayloadFormat | read-create | current | determine TDM over IP proprietary payload format. |
| 1.3.6.1.4.1.164.14.1.3.1.3.1.4 | ColumnpwTDMoIpCfgFarEndType | read-create | current | Determines TDM over IP Far End type. |
| 1.3.6.1.4.1.164.14.1.3.1.3.1.5 | ColumnpwTDMoIpCfgDelaySensitivity | read-create | current | Determines whether to optimize the clock for accurateness or for constant delay: o Disable (Accurate clock is more important than constant delay) o Enable (Con… |
| 1.3.6.1.4.1.164.14.1.3.1.3.1.6 | ColumnpwTDMoIpCfgFramesInPacket | read-create | current | UDP payload length - determines the ethernet packet size |
| 1.3.6.1.4.1.164.14.1.3.2 | NoderadPwServiceCfgAtm | |||
| 1.3.6.1.4.1.164.14.1.3.2.1 | TablepwAtmCfgXTable | not-accessible | current | This table is an extension of pwAtmCfgTable of PW-ATM-R-MIB. Each row that is added/removed there will be added/removed in this table. |
| 1.3.6.1.4.1.164.14.1.3.2.1.1 | RowpwAtmCfgXEntry | not-accessible | current | This table is indexed by pwIdx, the value of which is equal to the same index that was created for the associated entry in the PW Table (in the PW-STD-MIB)- th… |
| 1.3.6.1.4.1.164.14.1.3.2.1.1.1 | ColumnpwAtmCfgAal5Mode | read-write | current | This objects defines whether AAL5 Mode is enabled for this PW. |
| 1.3.6.1.4.1.164.14.1.3.2.1.1.2 | ColumnpwAtmCfgAal5SduTermType | read-write | current | This objects defines the AAL5-SDU Termination Type. It means - where should the AAL5-SDU PW frame, received from PSN, be forwarded: atm(2) - forwarded into ATM… |
| 1.3.6.1.4.1.164.14.1.3.2.1.1.3 | ColumnpwAtmCfgTimeout | read-write | current | This object defines the Timeout period, measured in usec. Timeout mechanism is used in order to send out a packet before the maximum concatenated cells limit h… |
| 1.3.6.1.4.1.164.14.1.3.3 | NoderadPwServiceCfgFr | |||
| 1.3.6.1.4.1.164.14.1.3.3.1 | TablepwFrCfgTable | not-accessible | current | This table contains a set of parameters for Frame Relay PW in the pwFrTable. |
| 1.3.6.1.4.1.164.14.1.3.3.1.1 | RowpwFrCfgEntry | not-accessible | current | These parameters define the characteristics of a Frame Relay PW. This table is indexed by pwIdx, the value of which is equal to the same index that was created… |
| 1.3.6.1.4.1.164.14.1.3.3.1.1.1 | ColumnpwFrCfgDlciFieldLength | read-write | current | DLCI Field length in bytes. Possible values ae 10, 17 or 24 |
| 1.3.6.1.4.1.164.14.1.3.3.1.1.2 | ColumnpwFrCfgBitMarking | read-write | current | This object defines which Frame Relay bits are copied into the outgoing interface or from the incoming interface. When labeled bit is 1, FR bit is copied. For … |
| 1.3.6.1.4.1.164.14.1.3.3.1.1.3 | ColumnpwFrCfgDlci | read-write | current | DLCI value of Frame Relay VC associated with this PW. |
| 1.3.6.1.4.1.164.14.2 | NoderadPwPerfMonitoring | |||
| 1.3.6.1.4.1.164.14.2.1 | TablepwPerfCurrentXTable | not-accessible | current | This table is an extension of pwPerfCurrentTable (PW-STD-R-MIB). |
| 1.3.6.1.4.1.164.14.2.1.1 | RowpwPerfCurrentXEntry | not-accessible | current | An entry in a table. |
| 1.3.6.1.4.1.164.14.2.1.1.1 | ColumnpwPerfCurrentInCongestDropPackets | read-only | current | The counter for number of received packets that are dropped due to congestion by the PW (from the PSN) in the current 15-minute interval. |
| 1.3.6.1.4.1.164.14.2.1.1.2 | ColumnpwPerfCurrentOutCongestDropPackets | read-only | current | The counter for number of transmitted packets that are dropped due to congestion by the PW (to the PSN) in the current 15-minute interval. |
| 1.3.6.1.4.1.164.14.2.2 | TablepwPerfIntervalXTable | not-accessible | current | This table is an extension of pwPerfIntervalTable (PW-STD-R-MIB). |
| 1.3.6.1.4.1.164.14.2.2.1 | RowpwPerfIntervalXEntry | not-accessible | current | An entry in a table. |
| 1.3.6.1.4.1.164.14.2.2.1.1 | ColumnpwPerfIntervalXNumber | not-accessible | current | A number N, between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently com… |
| 1.3.6.1.4.1.164.14.2.2.1.2 | ColumnpwPerfIntervalInCongestDropPackets | read-only | current | The counter for number of received packets that are dropped due to congestion by the PW (to the PSN) during the interval. |
| 1.3.6.1.4.1.164.14.2.2.1.3 | ColumnpwPerfIntervalOutCongestDropPackets | read-only | current | The counter for number of transmitted packets that are dropped due to congestion by the PW (to the PSN) during the interval. |
| 1.3.6.1.4.1.164.14.2.3 | TablepwAtmPerfCurrentXTable | not-accessible | current | This table is an extension of pwArmPerfCurrentTable (PW-ATM-R-MIB). |
| 1.3.6.1.4.1.164.14.2.3.1 | RowpwAtmPerfCurrentXEntry | not-accessible | current | An entry in a table. |
| 1.3.6.1.4.1.164.14.2.3.1.1 | ColumnpwAtmPerfCurrentInDiscardTotalCells | read-only | current | The number of total received cells (CLP0 and CLP1) that were discarded by the traffic policer, in the current 15-minute interval. |
| 1.3.6.1.4.1.164.14.2.3.1.2 | ColumnpwAtmPerfCurrentInDiscardClp0Cells | read-only | current | The number of received CLP0 cells that were discarded by the traffic policer, in the current 15-minute interval. |
| 1.3.6.1.4.1.164.14.2.3.1.3 | ColumnpwAtmPerfCurrentTaggedCells | read-only | current | The number of cells that were tagged by the traffic policer from CLP=0 to CLP=1, in the current 15-minute interval. |
| 1.3.6.1.4.1.164.14.2.4 | TablepwAtmPerfIntervalXTable | not-accessible | current | This table is an extension of pwAtmPerfIntervalTable (PW-ATM-R-MIB). |
| 1.3.6.1.4.1.164.14.2.4.1 | RowpwAtmPerfIntervalXEntry | not-accessible | current | An entry in a table. |
| 1.3.6.1.4.1.164.14.2.4.1.1 | ColumnpwAtmPerfIntervalXNumber | not-accessible | current | A number N, between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently com… |
| 1.3.6.1.4.1.164.14.2.4.1.2 | ColumnpwAtmPerfIntervalInDiscardTotalCells | read-only | current | The number of total received cells (CLP0 and CLP1) that were discarded by the traffic policer, during the interval. |
| 1.3.6.1.4.1.164.14.2.4.1.3 | ColumnpwAtmPerfIntervalInDiscardClp0Cells | read-only | current | The number of received CLP0 cells that were discarded by the traffic policer, during the interval. |
| 1.3.6.1.4.1.164.14.2.4.1.4 | ColumnpwAtmPerfIntervalTaggedCells | read-only | current | The number of cells that were tagged by the traffic policer from CLP=0 to CLP=1, during the interval. |
| 1.3.6.1.4.1.164.15 | NoderadEMS | |||
| 1.3.6.1.4.1.164.15.0 | IdentityradEmsEvents | current | The events sent by RAD EMS to other vendor's NMS. | |
| 1.3.6.1.4.1.164.15.0.1 | NotificationemsEventLogSizeStatusChange | current | This trap is sent in order to provide certain size changes of EMS Event Log. It is periodically generated and sent when EMS discovers that Event Log size excee… | |
| 1.3.6.1.4.1.164.15.0.2 | NotificationemsEventGenericTrap | current | Generic trap forwarding facility. Used for integration purposes between RADview EMS and other systems, for example Netcool. | |
| 1.3.6.1.4.1.164.15.1 | NodeemsTrapData | |||
| 1.3.6.1.4.1.164.15.1.1 | ScalaremsTrapSeverity | accessible-for-notify | current | EMS will send this object as an attached parameter, of traps sent to another vendor's NMS. It will include the Severity configured by user for the respective t… |
| 1.3.6.1.4.1.164.15.1.2 | ScalaremsEventSeverity | accessible-for-notify | current | EMS Event Severity by enumerated integer. |
| 1.3.6.1.4.1.164.15.1.3 | ScalaremsTrapOriginatorAddress | accessible-for-notify | current | The Address of the trap originator (when trap is forwarded). |
| 1.3.6.1.4.1.164.15.1.4 | ScalaremsTrapOriginatorNodeName | accessible-for-notify | current | Node Name given in EMS to the trap originator. |
| 1.3.6.1.4.1.164.15.1.5 | ScalaremsEventClassName | accessible-for-notify | current | Event Class Name assigned in EMS. |
| 1.3.6.1.4.1.164.15.1.6 | ScalaremsEventInstance | accessible-for-notify | current | Instance assigned to Event by EMS. |
| 1.3.6.1.4.1.164.15.1.7 | ScalaremsEventDescription | accessible-for-notify | current | Description assigned to this Event in EMS. |
| 1.3.6.1.4.1.164.15.1.8 | ScalaremsEventType | accessible-for-notify | current | Event Type assigned by EMS. |
| 1.3.6.1.4.1.164.15.1.9 | ScalaremsEventOperation | accessible-for-notify | current | EMS operation related to this Event. |
| 1.3.6.1.4.1.164.15.1.10 | ScalaremsNodeId | accessible-for-notify | current | The EMS ID of the Node. Unique 64-bit identifier. |
| 1.3.6.1.4.1.164.15.1.11 | ScalaremsName | accessible-for-notify | current | EMS station name. |
| 1.3.6.1.4.1.164.15.1.12 | ScalaremsUserName | accessible-for-notify | current | EMS User Name (User who performed emsEventOperation). When emsEventOperation=noOperation(0), the string will be 'NA'. |
| 1.3.6.1.4.1.164.20 | NoderadExperimental |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Dscp | Integer32 (0..63) | current | A Differentiated Services Code-Point that may be used for marking a traffic stream. |
| RadTransportAddressEfmOam | OCTET STRING (SIZE (4)) systemsEvents OBJECT-IDENTITY STATUS current DESCRIPTION "The events for RAD products." ::= { systems 0 } | current | Represents a transport address consisting of an EFM OAM port number. |
| RadTransportAddressType | INTEGER { unknown(0), efmOam (1) } | current | A value that represents a transport domain. This is the enumerated version of the transport domain registrations in this MIB module. It was added in RAD MIB due to the fact that it is not defined in Standard MIB. The en… |