DIFFSERV-MIB
191 objects
This MIB defines the objects necessary to manage a device that uses the Differentiated Services Architecture described in RFC 2475. The Conceptual Model of a Differentiated Services Router provides supporting information on how such a router is modeled.
Imported Objects
| DIFFSERV-DSCP-TC | Dscp DscpOrAny |
| IF-MIB | ifIndex InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressPrefixLength InetAddressType InetPortNumber |
| INTEGRATED-SERVICES-MIB | BurstSize |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter64 mib-2 MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE Unsigned32 zeroDotZero |
| SNMPv2-TC | AutonomousType RowPointer RowStatus StorageType TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.97 | IdentitydiffServMib | This MIB defines the objects necessary to manage a device that uses the Differentiated Services Architecture described in RFC 2475. The Conceptual Model of a D… | ||
| 1.3.6.1.2.1.97.1 | NodediffServMIBObjects | |||
| 1.3.6.1.2.1.97.1.1 | ScalarAn | current | IfDirection specifies a direction of data travel on an interface. 'inbound' traffic is operated on during reception from the interface, while 'outbound' traffi… | |
| 1.3.6.1.2.1.97.1.1 | NodediffServDataPath | |||
| 1.3.6.1.2.1.97.1.1.1 | TablediffServDataPathTable | not-accessible | current | The data path table contains RowPointers indicating the start of the functional data path for each interface and traffic direction in this device. These may me… |
| 1.3.6.1.2.1.97.1.1.1.1 | RowdiffServDataPathEntry | not-accessible | current | An entry in the data path table indicates the start of a single Differentiated Services Functional Data Path in this device. These are associated with individu… |
| 1.3.6.1.2.1.97.1.1.1.1.1 | ColumndiffServDataPathIfDirection | not-accessible | current | IfDirection specifies whether the reception or transmission path for this interface is in view. |
| 1.3.6.1.2.1.97.1.1.1.1.2 | ColumndiffServDataPathStart | read-create | current | This selects the first Differentiated Services Functional Data Path Element to handle traffic for this data path. This RowPointer should point to an instance o… |
| 1.3.6.1.2.1.97.1.1.1.1.3 | ColumndiffServDataPathStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.2.1.97.1.1.1.1.4 | ColumndiffServDataPathStatus | read-create | current | The status of this conceptual row. All writable objects in this row may be modified at any time. |
| 1.3.6.1.2.1.97.1.2 | NodediffServClassifier | |||
| 1.3.6.1.2.1.97.1.2.1 | ScalardiffServClfrNextFree | read-only | current | This object contains an unused value for diffServClfrId, or a zero to indicate that none exist. |
| 1.3.6.1.2.1.97.1.2.2 | TablediffServClfrTable | not-accessible | current | This table enumerates all the diffserv classifier functional data path elements of this device. The actual classification definitions are defined in diffServCl… |
| 1.3.6.1.2.1.97.1.2.2.1 | RowdiffServClfrEntry | not-accessible | current | An entry in the classifier table describes a single classifier. All classifier elements belonging to the same classifier use the classifier's diffServClfrId as… |
| 1.3.6.1.2.1.97.1.2.2.1.1 | ColumndiffServClfrId | not-accessible | current | An index that enumerates the classifier entries. Managers should obtain new values for row creation in this table by reading diffServClfrNextFree. |
| 1.3.6.1.2.1.97.1.2.2.1.2 | ColumndiffServClfrStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.2.1.97.1.2.2.1.3 | ColumndiffServClfrStatus | read-create | current | The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one o… |
| 1.3.6.1.2.1.97.1.2.3 | ScalardiffServClfrElementNextFree | read-only | current | This object contains an unused value for diffServClfrElementId, or a zero to indicate that none exist. |
| 1.3.6.1.2.1.97.1.2.4 | TablediffServClfrElementTable | not-accessible | current | The classifier element table enumerates the relationship between classification patterns and subsequent downstream Differentiated Services Functional Data Path… |
| 1.3.6.1.2.1.97.1.2.4.1 | RowdiffServClfrElementEntry | not-accessible | current | An entry in the classifier element table describes a single element of the classifier. |
| 1.3.6.1.2.1.97.1.2.4.1.1 | ColumndiffServClfrElementId | not-accessible | current | An index that enumerates the Classifier Element entries. Managers obtain new values for row creation in this table by reading diffServClfrElementNextFree. |
| 1.3.6.1.2.1.97.1.2.4.1.2 | ColumndiffServClfrElementPrecedence | read-create | current | The relative order in which classifier elements are applied: higher numbers represent classifier element with higher precedence. Classifier elements with the s… |
| 1.3.6.1.2.1.97.1.2.4.1.3 | ColumndiffServClfrElementNext | read-create | current | This attribute provides one branch of the fan-out functionality of a classifier described in the Informal Differentiated Services Model section 4.1. This selec… |
| 1.3.6.1.2.1.97.1.2.4.1.4 | ColumndiffServClfrElementSpecific | read-create | current | A pointer to a valid entry in another table, filter table, that describes the applicable classification parameters, e.g. an entry in diffServMultiFieldClfrTabl… |
| 1.3.6.1.2.1.97.1.2.4.1.5 | ColumndiffServClfrElementStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.2.1.97.1.2.4.1.6 | ColumndiffServClfrElementStatus | read-create | current | The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one o… |
| 1.3.6.1.2.1.97.1.2.5 | ScalardiffServMultiFieldClfrNextFree | read-only | current | This object contains an unused value for diffServMultiFieldClfrId, or a zero to indicate that none exist. |
| 1.3.6.1.2.1.97.1.2.6 | TablediffServMultiFieldClfrTable | not-accessible | current | A table of IP Multi-field Classifier filter entries that a system may use to identify IP traffic. |
| 1.3.6.1.2.1.97.1.2.6.1 | RowdiffServMultiFieldClfrEntry | not-accessible | current | An IP Multi-field Classifier entry describes a single filter. |
| 1.3.6.1.2.1.97.1.2.6.1.1 | ColumndiffServMultiFieldClfrId | not-accessible | current | An index that enumerates the MultiField Classifier filter entries. Managers obtain new values for row creation in this table by reading diffServMultiFieldClfrN… |
| 1.3.6.1.2.1.97.1.2.6.1.2 | ColumndiffServMultiFieldClfrAddrType | read-create | current | The type of IP address used by this classifier entry. While other types of addresses are defined in the InetAddressType textual convention, and DNS names, a cl… |
| 1.3.6.1.2.1.97.1.2.6.1.3 | ColumndiffServMultiFieldClfrDstAddr | read-create | current | The IP address to match against the packet's destination IP address. This may not be a DNS name, but may be an IPv4 or IPv6 prefix. diffServMultiFieldClfrDstPr… |
| 1.3.6.1.2.1.97.1.2.6.1.4 | ColumndiffServMultiFieldClfrDstPrefixLength | read-create | current | The length of the CIDR Prefix carried in diffServMultiFieldClfrDstAddr. In IPv4 addresses, a length of 0 indicates a match of any address; a length of 32 indic… |
| 1.3.6.1.2.1.97.1.2.6.1.5 | ColumndiffServMultiFieldClfrSrcAddr | read-create | current | The IP address to match against the packet's source IP address. This may not be a DNS name, but may be an IPv4 or IPv6 prefix. diffServMultiFieldClfrSrcPrefixL… |
| 1.3.6.1.2.1.97.1.2.6.1.6 | ColumndiffServMultiFieldClfrSrcPrefixLength | read-create | current | The length of the CIDR Prefix carried in diffServMultiFieldClfrSrcAddr. In IPv4 addresses, a length of 0 indicates a match of any address; a length of 32 indic… |
| 1.3.6.1.2.1.97.1.2.6.1.7 | ColumndiffServMultiFieldClfrDscp | read-create | current | The value that the DSCP in the packet must have to match this entry. A value of -1 indicates that a specific DSCP value has not been defined and thus all DSCP … |
| 1.3.6.1.2.1.97.1.2.6.1.8 | ColumndiffServMultiFieldClfrFlowId | read-create | current | The flow identifier in an IPv6 header. |
| 1.3.6.1.2.1.97.1.2.6.1.9 | ColumndiffServMultiFieldClfrProtocol | read-create | current | The IP protocol to match against the IPv4 protocol number or the IPv6 Next- Header number in the packet. A value of 255 means match all. Note the protocol numb… |
| 1.3.6.1.2.1.97.1.2.6.1.10 | ColumndiffServMultiFieldClfrDstL4PortMin | read-create | current | The minimum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. |
| 1.3.6.1.2.1.97.1.2.6.1.11 | ColumndiffServMultiFieldClfrDstL4PortMax | read-create | current | The maximum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. This value must be equal to or grea… |
| 1.3.6.1.2.1.97.1.2.6.1.12 | ColumndiffServMultiFieldClfrSrcL4PortMin | read-create | current | The minimum value that the layer-4 source port number in the packet must have in order to match this classifier entry. |
| 1.3.6.1.2.1.97.1.2.6.1.13 | ColumndiffServMultiFieldClfrSrcL4PortMax | read-create | current | The maximum value that the layer-4 source port number in the packet must have in order to match this classifier entry. This value must be equal to or greater t… |
| 1.3.6.1.2.1.97.1.2.6.1.14 | ColumndiffServMultiFieldClfrStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.2.1.97.1.2.6.1.15 | ColumndiffServMultiFieldClfrStatus | read-create | current | The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one o… |
| 1.3.6.1.2.1.97.1.3 | NodediffServMeter | |||
| 1.3.6.1.2.1.97.1.3.1 | ScalardiffServMeterNextFree | read-only | current | This object contains an unused value for diffServMeterId, or a zero to indicate that none exist. |
| 1.3.6.1.2.1.97.1.3.2 | TablediffServMeterTable | not-accessible | current | This table enumerates specific meters that a system may use to police a stream of traffic. The traffic stream to be metered is determined by the Differentiated… |
| 1.3.6.1.2.1.97.1.3.2.1 | RowdiffServMeterEntry | not-accessible | current | An entry in the meter table describes a single conformance level of a meter. |
| 1.3.6.1.2.1.97.1.3.2.1.1 | ColumndiffServMeterId | not-accessible | current | An index that enumerates the Meter entries. Managers obtain new values for row creation in this table by reading diffServMeterNextFree. |
| 1.3.6.1.2.1.97.1.3.2.1.2 | ColumndiffServMeterSucceedNext | read-create | current | If the traffic does conform, this selects the next Differentiated Services Functional Data Path element to handle traffic for this data path. This RowPointer s… |
| 1.3.6.1.2.1.97.1.3.2.1.3 | ColumndiffServMeterFailNext | read-create | current | If the traffic does not conform, this selects the next Differentiated Services Functional Data Path element to handle traffic for this data path. This RowPoint… |
| 1.3.6.1.2.1.97.1.3.2.1.4 | ColumndiffServMeterSpecific | read-create | current | This indicates the behavior of the meter by pointing to an entry containing detailed parameters. Note that entries in that specific table must be managed expli… |
| 1.3.6.1.2.1.97.1.3.2.1.5 | ColumndiffServMeterStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.2.1.97.1.3.2.1.6 | ColumndiffServMeterStatus | read-create | current | The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one o… |
| 1.3.6.1.2.1.97.1.4 | NodediffServTBParam | |||
| 1.3.6.1.2.1.97.1.4.1 | ScalardiffServTBParamNextFree | read-only | current | This object contains an unused value for diffServTBParamId, or a zero to indicate that none exist. |
| 1.3.6.1.2.1.97.1.4.2 | TablediffServTBParamTable | not-accessible | current | This table enumerates a single set of token bucket meter parameters that a system may use to police a stream of traffic. Such meters are modeled here as having… |
| 1.3.6.1.2.1.97.1.4.2.1 | RowdiffServTBParamEntry | not-accessible | current | An entry that describes a single set of token bucket parameters. |
| 1.3.6.1.2.1.97.1.4.2.1.1 | ColumndiffServTBParamId | not-accessible | current | An index that enumerates the Token Bucket Parameter entries. Managers obtain new values for row creation in this table by reading diffServTBParamNextFree. |
| 1.3.6.1.2.1.97.1.4.2.1.2 | ColumndiffServTBParamType | read-create | current | The Metering algorithm associated with the Token Bucket parameters. zeroDotZero indicates this is unknown. Standard values for generic algorithms: diffServTBPa… |
| 1.3.6.1.2.1.97.1.4.2.1.3 | ColumndiffServTBParamRate | read-create | current | The token-bucket rate, in kilobits per second (kbps). This attribute is used for: 1. CIR in RFC 2697 for srTCM 2. CIR and PIR in RFC 2698 for trTCM 3. CTR and … |
| 1.3.6.1.2.1.97.1.4.2.1.4 | ColumndiffServTBParamBurstSize | read-create | current | The maximum number of bytes in a single transmission burst. This attribute is used for: 1. CBS and EBS in RFC 2697 for srTCM 2. CBS and PBS in RFC 2698 for trT… |
| 1.3.6.1.2.1.97.1.4.2.1.5 | ColumndiffServTBParamInterval | read-create | current | The time interval used with the token bucket. For: 1. Average Rate Meter, the Informal Differentiated Services Model section 5.2.1, - Delta. 2. Simple Token Bu… |
| 1.3.6.1.2.1.97.1.4.2.1.6 | ColumndiffServTBParamStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.2.1.97.1.4.2.1.7 | ColumndiffServTBParamStatus | read-create | current | The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one o… |
| 1.3.6.1.2.1.97.1.5 | NodediffServAction | |||
| 1.3.6.1.2.1.97.1.5.1 | ScalardiffServActionNextFree | read-only | current | This object contains an unused value for diffServActionId, or a zero to indicate that none exist. |
| 1.3.6.1.2.1.97.1.5.2 | TablediffServActionTable | not-accessible | current | The Action Table enumerates actions that can be performed to a stream of traffic. Multiple actions can be concatenated. For example, traffic exiting from a met… |
| 1.3.6.1.2.1.97.1.5.2.1 | RowdiffServActionEntry | not-accessible | current | Each entry in the action table allows description of one specific action to be applied to traffic. |
| 1.3.6.1.2.1.97.1.5.2.1.1 | ColumndiffServActionId | not-accessible | current | An index that enumerates the Action entries. Managers obtain new values for row creation in this table by reading diffServActionNextFree. |
| 1.3.6.1.2.1.97.1.5.2.1.2 | ColumndiffServActionInterface | read-create | current | The interface index (value of ifIndex) that this action occurs on. This may be derived from the diffServDataPathStartEntry's index by extension through the var… |
| 1.3.6.1.2.1.97.1.5.2.1.3 | ColumndiffServActionNext | read-create | current | This selects the next Differentiated Services Functional Data Path Element to handle traffic for this data path. This RowPointer should point to an instance of… |
| 1.3.6.1.2.1.97.1.5.2.1.4 | ColumndiffServActionSpecific | read-create | current | A pointer to an object instance providing additional information for the type of action indicated by this action table entry. For the standard actions defined … |
| 1.3.6.1.2.1.97.1.5.2.1.5 | ColumndiffServActionStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.2.1.97.1.5.2.1.6 | ColumndiffServActionStatus | read-create | current | The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one o… |
| 1.3.6.1.2.1.97.1.5.3 | TablediffServDscpMarkActTable | not-accessible | current | This table enumerates specific DSCPs used for marking or remarking the DSCP field of IP packets. The entries of this table may be referenced by a diffServActio… |
| 1.3.6.1.2.1.97.1.5.3.1 | RowdiffServDscpMarkActEntry | not-accessible | current | An entry in the DSCP mark action table that describes a single DSCP used for marking. |
| 1.3.6.1.2.1.97.1.5.3.1.1 | ColumndiffServDscpMarkActDscp | read-only | current | The DSCP that this Action will store into the DSCP field of the subject. It is quite possible that the only packets subject to this Action are already marked w… |
| 1.3.6.1.2.1.97.1.5.4 | ScalardiffServCountActNextFree | read-only | current | This object contains an unused value for diffServCountActId, or a zero to indicate that none exist. |
| 1.3.6.1.2.1.97.1.5.5 | TablediffServCountActTable | not-accessible | current | This table contains counters for all the traffic passing through an action element. |
| 1.3.6.1.2.1.97.1.5.5.1 | RowdiffServCountActEntry | not-accessible | current | An entry in the count action table describes a single set of traffic counters. |
| 1.3.6.1.2.1.97.1.5.5.1.1 | ColumndiffServCountActId | not-accessible | current | An index that enumerates the Count Action entries. Managers obtain new values for row creation in this table by reading diffServCountActNextFree. |
| 1.3.6.1.2.1.97.1.5.5.1.2 | ColumndiffServCountActOctets | read-only | current | The number of octets at the Action data path element. Discontinuities in the value of this counter can occur at re- initialization of the management system and… |
| 1.3.6.1.2.1.97.1.5.5.1.3 | ColumndiffServCountActPkts | read-only | current | The number of packets at the Action data path element. Discontinuities in the value of this counter can occur at re- initialization of the management system an… |
| 1.3.6.1.2.1.97.1.5.5.1.4 | ColumndiffServCountActStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.2.1.97.1.5.5.1.5 | ColumndiffServCountActStatus | read-create | current | The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one o… |
| 1.3.6.1.2.1.97.1.6 | NodediffServAlgDrop | |||
| 1.3.6.1.2.1.97.1.6.1 | ScalardiffServAlgDropNextFree | read-only | current | This object contains an unused value for diffServAlgDropId, or a zero to indicate that none exist. |
| 1.3.6.1.2.1.97.1.6.2 | TablediffServAlgDropTable | not-accessible | current | The algorithmic drop table contains entries describing an element that drops packets according to some algorithm. |
| 1.3.6.1.2.1.97.1.6.2.1 | RowdiffServAlgDropEntry | not-accessible | current | An entry describes a process that drops packets according to some algorithm. Further details of the algorithm type are to be found in diffServAlgDropType and w… |
| 1.3.6.1.2.1.97.1.6.2.1.1 | ColumndiffServAlgDropId | not-accessible | current | An index that enumerates the Algorithmic Dropper entries. Managers obtain new values for row creation in this table by reading diffServAlgDropNextFree. |
| 1.3.6.1.2.1.97.1.6.2.1.2 | ColumndiffServAlgDropType | read-create | current | The type of algorithm used by this dropper. The value other(1) requires further specification in some other MIB module. In the tailDrop(2) algorithm, diffServA… |
| 1.3.6.1.2.1.97.1.6.2.1.3 | ColumndiffServAlgDropNext | read-create | current | This selects the next Differentiated Services Functional Data Path Element to handle traffic for this data path. This RowPointer should point to an instance of… |
| 1.3.6.1.2.1.97.1.6.2.1.4 | ColumndiffServAlgDropQMeasure | read-create | current | Points to an entry in the diffServQTable to indicate the queue that a drop algorithm is to monitor when deciding whether to drop a packet. If the row pointed t… |
| 1.3.6.1.2.1.97.1.6.2.1.5 | ColumndiffServAlgDropQThreshold | read-create | current | A threshold on the depth in bytes of the queue being measured at which a trigger is generated to the dropping algorithm, unless diffServAlgDropType is alwaysDr… |
| 1.3.6.1.2.1.97.1.6.2.1.6 | ColumndiffServAlgDropSpecific | read-create | current | Points to a table entry that provides further detail regarding a drop algorithm. Entries with diffServAlgDropType equal to other(1) may have this point to a ta… |
| 1.3.6.1.2.1.97.1.6.2.1.7 | ColumndiffServAlgDropOctets | read-only | current | The number of octets that have been deterministically dropped by this drop process. Discontinuities in the value of this counter can occur at re- initializatio… |
| 1.3.6.1.2.1.97.1.6.2.1.8 | ColumndiffServAlgDropPkts | read-only | current | The number of packets that have been deterministically dropped by this drop process. Discontinuities in the value of this counter can occur at re- initializati… |
| 1.3.6.1.2.1.97.1.6.2.1.9 | ColumndiffServAlgRandomDropOctets | read-only | current | The number of octets that have been randomly dropped by this drop process. This counter applies, therefore, only to random droppers. Discontinuities in the val… |
| 1.3.6.1.2.1.97.1.6.2.1.10 | ColumndiffServAlgRandomDropPkts | read-only | current | The number of packets that have been randomly dropped by this drop process. This counter applies, therefore, only to random droppers. Discontinuities in the va… |
| 1.3.6.1.2.1.97.1.6.2.1.11 | ColumndiffServAlgDropStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.2.1.97.1.6.2.1.12 | ColumndiffServAlgDropStatus | read-create | current | The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one o… |
| 1.3.6.1.2.1.97.1.6.3 | ScalardiffServRandomDropNextFree | read-only | current | This object contains an unused value for diffServRandomDropId, or a zero to indicate that none exist. |
| 1.3.6.1.2.1.97.1.6.4 | TablediffServRandomDropTable | not-accessible | current | The random drop table contains entries describing a process that drops packets randomly. Entries in this table are pointed to by diffServAlgDropSpecific. |
| 1.3.6.1.2.1.97.1.6.4.1 | RowdiffServRandomDropEntry | not-accessible | current | An entry describes a process that drops packets according to a random algorithm. |
| 1.3.6.1.2.1.97.1.6.4.1.1 | ColumndiffServRandomDropId | not-accessible | current | An index that enumerates the Random Drop entries. Managers obtain new values for row creation in this table by reading diffServRandomDropNextFree. |
| 1.3.6.1.2.1.97.1.6.4.1.2 | ColumndiffServRandomDropMinThreshBytes | read-create | current | The average queue depth in bytes, beyond which traffic has a non-zero probability of being dropped. Changes in this variable may or may not be reflected in the… |
| 1.3.6.1.2.1.97.1.6.4.1.3 | ColumndiffServRandomDropMinThreshPkts | read-create | current | The average queue depth in packets, beyond which traffic has a non-zero probability of being dropped. Changes in this variable may or may not be reflected in t… |
| 1.3.6.1.2.1.97.1.6.4.1.4 | ColumndiffServRandomDropMaxThreshBytes | read-create | current | The average queue depth beyond which traffic has a probability indicated by diffServRandomDropProbMax of being dropped or marked. Note that this differs from t… |
| 1.3.6.1.2.1.97.1.6.4.1.5 | ColumndiffServRandomDropMaxThreshPkts | read-create | current | The average queue depth beyond which traffic has a probability indicated by diffServRandomDropProbMax of being dropped or marked. Note that this differs from t… |
| 1.3.6.1.2.1.97.1.6.4.1.6 | ColumndiffServRandomDropProbMax | read-create | current | The worst case random drop probability, expressed in drops per thousand packets. For example, if in the worst case every arriving packet may be dropped (100%) … |
| 1.3.6.1.2.1.97.1.6.4.1.7 | ColumndiffServRandomDropWeight | read-create | current | The weighting of past history in affecting the Exponentially Weighted Moving Average function that calculates the current average queue depth. The equation use… |
| 1.3.6.1.2.1.97.1.6.4.1.8 | ColumndiffServRandomDropSamplingRate | read-create | current | The number of times per second the queue is sampled for queue average calculation. A value of zero is used to mean that the queue is sampled approximately each… |
| 1.3.6.1.2.1.97.1.6.4.1.9 | ColumndiffServRandomDropStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.2.1.97.1.6.4.1.10 | ColumndiffServRandomDropStatus | read-create | current | The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one o… |
| 1.3.6.1.2.1.97.1.7 | NodediffServQueue | |||
| 1.3.6.1.2.1.97.1.7.1 | ScalardiffServQNextFree | read-only | current | This object contains an unused value for diffServQId, or a zero to indicate that none exist. |
| 1.3.6.1.2.1.97.1.7.2 | TablediffServQTable | not-accessible | current | The Queue Table enumerates the individual queues. Note that the MIB models queuing systems as composed of individual queues, one per class of traffic, even tho… |
| 1.3.6.1.2.1.97.1.7.2.1 | RowdiffServQEntry | not-accessible | current | An entry in the Queue Table describes a single queue or class of traffic. |
| 1.3.6.1.2.1.97.1.7.2.1.1 | ColumndiffServQId | not-accessible | current | An index that enumerates the Queue entries. Managers obtain new values for row creation in this table by reading diffServQNextFree. |
| 1.3.6.1.2.1.97.1.7.2.1.2 | ColumndiffServQNext | read-create | current | This selects the next Differentiated Services Scheduler. The RowPointer must point to a diffServSchedulerEntry. A value of zeroDotZero in this attribute indica… |
| 1.3.6.1.2.1.97.1.7.2.1.3 | ColumndiffServQMinRate | read-create | current | This RowPointer indicates the diffServMinRateEntry that the scheduler, pointed to by diffServQNext, should use to service this queue. If the row pointed to is … |
| 1.3.6.1.2.1.97.1.7.2.1.4 | ColumndiffServQMaxRate | read-create | current | This RowPointer indicates the diffServMaxRateEntry that the scheduler, pointed to by diffServQNext, should use to service this queue. If the row pointed to is … |
| 1.3.6.1.2.1.97.1.7.2.1.5 | ColumndiffServQStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.2.1.97.1.7.2.1.6 | ColumndiffServQStatus | read-create | current | The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one o… |
| 1.3.6.1.2.1.97.1.8 | NodediffServScheduler | |||
| 1.3.6.1.2.1.97.1.8.1 | ScalardiffServSchedulerNextFree | read-only | current | This object contains an unused value for diffServSchedulerId, or a zero to indicate that none exist. |
| 1.3.6.1.2.1.97.1.8.2 | TablediffServSchedulerTable | not-accessible | current | The Scheduler Table enumerates packet schedulers. Multiple scheduling algorithms can be used on a given data path, with each algorithm described by one diffSer… |
| 1.3.6.1.2.1.97.1.8.2.1 | RowdiffServSchedulerEntry | not-accessible | current | An entry in the Scheduler Table describing a single instance of a scheduling algorithm. |
| 1.3.6.1.2.1.97.1.8.2.1.1 | ColumndiffServSchedulerId | not-accessible | current | An index that enumerates the Scheduler entries. Managers obtain new values for row creation in this table by reading diffServSchedulerNextFree. |
| 1.3.6.1.2.1.97.1.8.2.1.2 | ColumndiffServSchedulerNext | read-create | current | This selects the next Differentiated Services Functional Data Path Element to handle traffic for this data path. This normally is null (zeroDotZero), or points… |
| 1.3.6.1.2.1.97.1.8.2.1.3 | ColumndiffServSchedulerMethod | read-create | current | The scheduling algorithm used by this Scheduler. zeroDotZero indicates that this is unknown. Standard values for generic algorithms: diffServSchedulerPriority,… |
| 1.3.6.1.2.1.97.1.8.2.1.4 | ColumndiffServSchedulerMinRate | read-create | current | This RowPointer indicates the entry in diffServMinRateTable which indicates the priority or minimum output rate from this scheduler. This attribute is used onl… |
| 1.3.6.1.2.1.97.1.8.2.1.5 | ColumndiffServSchedulerMaxRate | read-create | current | This RowPointer indicates the entry in diffServMaxRateTable which indicates the maximum output rate from this scheduler. When more than one maximum rate applie… |
| 1.3.6.1.2.1.97.1.8.2.1.6 | ColumndiffServSchedulerStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.2.1.97.1.8.2.1.7 | ColumndiffServSchedulerStatus | read-create | current | The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one o… |
| 1.3.6.1.2.1.97.1.8.3 | ScalardiffServMinRateNextFree | read-only | current | This object contains an unused value for diffServMinRateId, or a zero to indicate that none exist. |
| 1.3.6.1.2.1.97.1.8.4 | TablediffServMinRateTable | not-accessible | current | The Minimum Rate Parameters Table enumerates individual sets of scheduling parameter that can be used/reused by Queues and Schedulers. |
| 1.3.6.1.2.1.97.1.8.4.1 | RowdiffServMinRateEntry | not-accessible | current | An entry in the Minimum Rate Parameters Table describes a single set of scheduling parameters for use by one or more queues or schedulers. |
| 1.3.6.1.2.1.97.1.8.4.1.1 | ColumndiffServMinRateId | not-accessible | current | An index that enumerates the Scheduler Parameter entries. Managers obtain new values for row creation in this table by reading diffServMinRateNextFree. |
| 1.3.6.1.2.1.97.1.8.4.1.2 | ColumndiffServMinRatePriority | read-create | current | The priority of this input to the associated scheduler, relative to the scheduler's other inputs. A queue or scheduler with a larger numeric value will be serv… |
| 1.3.6.1.2.1.97.1.8.4.1.3 | ColumndiffServMinRateAbsolute | read-create | current | The minimum absolute rate, in kilobits/sec, that a downstream scheduler element should allocate to this queue. If the value is zero, then there is effectively … |
| 1.3.6.1.2.1.97.1.8.4.1.4 | ColumndiffServMinRateRelative | read-create | current | The minimum rate that a downstream scheduler element should allocate to this queue, relative to the maximum rate of the interface as reported by ifSpeed or ifH… |
| 1.3.6.1.2.1.97.1.8.4.1.5 | ColumndiffServMinRateStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.2.1.97.1.8.4.1.6 | ColumndiffServMinRateStatus | read-create | current | The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one o… |
| 1.3.6.1.2.1.97.1.8.5 | ScalardiffServMaxRateNextFree | read-only | current | This object contains an unused value for diffServMaxRateId, or a zero to indicate that none exist. |
| 1.3.6.1.2.1.97.1.8.6 | TablediffServMaxRateTable | not-accessible | current | The Maximum Rate Parameter Table enumerates individual sets of scheduling parameter that can be used/reused by Queues and Schedulers. |
| 1.3.6.1.2.1.97.1.8.6.1 | RowdiffServMaxRateEntry | not-accessible | current | An entry in the Maximum Rate Parameter Table describes a single set of scheduling parameters for use by one or more queues or schedulers. |
| 1.3.6.1.2.1.97.1.8.6.1.1 | ColumndiffServMaxRateId | not-accessible | current | An index that enumerates the Maximum Rate Parameter entries. Managers obtain new values for row creation in this table by reading diffServMaxRateNextFree. |
| 1.3.6.1.2.1.97.1.8.6.1.2 | ColumndiffServMaxRateLevel | not-accessible | current | An index that indicates which level of a multi-rate shaper is being given its parameters. A multi-rate shaper has some number of rate levels. Frame Relay's dua… |
| 1.3.6.1.2.1.97.1.8.6.1.3 | ColumndiffServMaxRateAbsolute | read-create | current | The maximum rate in kilobits/sec that a downstream scheduler element should allocate to this queue. If the value is zero, then there is effectively no maximum … |
| 1.3.6.1.2.1.97.1.8.6.1.4 | ColumndiffServMaxRateRelative | read-create | current | The maximum rate that a downstream scheduler element should allocate to this queue, relative to the maximum rate of the interface as reported by ifSpeed or ifH… |
| 1.3.6.1.2.1.97.1.8.6.1.5 | ColumndiffServMaxRateThreshold | read-create | current | The number of bytes of queue depth at which the rate of a multi-rate scheduler will increase to the next output rate. In the last conceptual row for such a sha… |
| 1.3.6.1.2.1.97.1.8.6.1.6 | ColumndiffServMaxRateStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.2.1.97.1.8.6.1.7 | ColumndiffServMaxRateStatus | read-create | current | The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one o… |
| 1.3.6.1.2.1.97.2 | NodediffServMIBConformance | |||
| 1.3.6.1.2.1.97.2.1 | NodediffServMIBCompliances | |||
| 1.3.6.1.2.1.97.2.1.1 | CompliancediffServMIBFullCompliance | current | When this MIB is implemented with support for read-create, then such an implementation can claim full compliance. Such devices can then be both monitored and c… | |
| 1.3.6.1.2.1.97.2.1.2 | CompliancediffServMIBReadOnlyCompliance | read-only | current | When this MIB is implemented without support for read-create (i.e. in read-only mode), then such an implementation can claim read-only compliance. Such a devic… |
| 1.3.6.1.2.1.97.2.2 | NodediffServMIBGroups | |||
| 1.3.6.1.2.1.97.2.2.1 | GroupdiffServMIBDataPathGroup | current | The Data Path Group defines the MIB Objects that describe a functional data path. | |
| 1.3.6.1.2.1.97.2.2.2 | GroupdiffServMIBClfrGroup | current | The Classifier Group defines the MIB Objects that describe the list the starts of individual classifiers. | |
| 1.3.6.1.2.1.97.2.2.3 | GroupdiffServMIBClfrElementGroup | current | The Classifier Element Group defines the MIB Objects that describe the classifier elements that make up a generic classifier. | |
| 1.3.6.1.2.1.97.2.2.4 | GroupdiffServMIBMultiFieldClfrGroup | current | The Multi-field Classifier Group defines the MIB Objects that describe a classifier element for matching on various fields of an IP and upper-layer protocol he… | |
| 1.3.6.1.2.1.97.2.2.5 | GroupdiffServMIBMeterGroup | current | The Meter Group defines the objects used in describing a generic meter element. | |
| 1.3.6.1.2.1.97.2.2.6 | GroupdiffServMIBTBParamGroup | current | The Token-Bucket Meter Group defines the objects used in describing a token bucket meter element. | |
| 1.3.6.1.2.1.97.2.2.7 | GroupdiffServMIBActionGroup | current | The Action Group defines the objects used in describing a generic action element. | |
| 1.3.6.1.2.1.97.2.2.8 | GroupdiffServMIBDscpMarkActGroup | current | The DSCP Mark Action Group defines the objects used in describing a DSCP Marking Action element. | |
| 1.3.6.1.2.1.97.2.2.9 | GroupdiffServMIBCounterGroup | current | A collection of objects providing information specific to packet-oriented network interfaces. | |
| 1.3.6.1.2.1.97.2.2.10 | GroupdiffServMIBAlgDropGroup | current | The Algorithmic Drop Group contains the objects that describe algorithmic dropper operation and configuration. | |
| 1.3.6.1.2.1.97.2.2.11 | GroupdiffServMIBRandomDropGroup | current | The Random Drop Group augments the Algorithmic Drop Group for random dropper operation and configuration. | |
| 1.3.6.1.2.1.97.2.2.12 | GroupdiffServMIBQGroup | current | The Queue Group contains the objects that describe an interface's queues. | |
| 1.3.6.1.2.1.97.2.2.13 | GroupdiffServMIBSchedulerGroup | current | The Scheduler Group contains the objects that describe packet schedulers on interfaces. | |
| 1.3.6.1.2.1.97.2.2.14 | GroupdiffServMIBMinRateGroup | current | The Minimum Rate Parameter Group contains the objects that describe packet schedulers' minimum rate or priority guarantees. | |
| 1.3.6.1.2.1.97.2.2.15 | GroupdiffServMIBMaxRateGroup | current | The Maximum Rate Parameter Group contains the objects that describe packet schedulers' maximum rate guarantees. | |
| 1.3.6.1.2.1.97.3 | NodediffServMIBAdmin | |||
| 1.3.6.1.2.1.97.3.1 | NodediffServTBMeters | |||
| 1.3.6.1.2.1.97.3.1.1 | IdentitydiffServTBParamSimpleTokenBucket | current | Two Parameter Token Bucket Meter as described in the Informal Differentiated Services Model section 5.2.3. | |
| 1.3.6.1.2.1.97.3.1.2 | IdentitydiffServTBParamAvgRate | current | Average Rate Meter as described in the Informal Differentiated Services Model section 5.2.1. | |
| 1.3.6.1.2.1.97.3.1.3 | IdentitydiffServTBParamSrTCMBlind | current | Single Rate Three Color Marker Metering as defined by RFC 2697, in the `Color Blind' mode as described by the RFC. | |
| 1.3.6.1.2.1.97.3.1.4 | IdentitydiffServTBParamSrTCMAware | current | Single Rate Three Color Marker Metering as defined by RFC 2697, in the `Color Aware' mode as described by the RFC. | |
| 1.3.6.1.2.1.97.3.1.5 | IdentitydiffServTBParamTrTCMBlind | current | Two Rate Three Color Marker Metering as defined by RFC 2698, in the `Color Blind' mode as described by the RFC. | |
| 1.3.6.1.2.1.97.3.1.6 | IdentitydiffServTBParamTrTCMAware | current | Two Rate Three Color Marker Metering as defined by RFC 2698, in the `Color Aware' mode as described by the RFC. | |
| 1.3.6.1.2.1.97.3.1.7 | IdentitydiffServTBParamTswTCM | current | Time Sliding Window Three Color Marker Metering as defined by RFC 2859. | |
| 1.3.6.1.2.1.97.3.2 | NodediffServSchedulers | |||
| 1.3.6.1.2.1.97.3.2.1 | IdentitydiffServSchedulerPriority | current | For use with diffServSchedulerMethod to indicate the Priority scheduling method. This is defined as an algorithm in which the presence of data in a queue or se… | |
| 1.3.6.1.2.1.97.3.2.2 | IdentitydiffServSchedulerWRR | current | For use with diffServSchedulerMethod to indicate the Weighted Round Robin scheduling method, defined as any algorithm in which a set of queues are visited in a… | |
| 1.3.6.1.2.1.97.3.2.3 | IdentitydiffServSchedulerWFQ | current | For use with diffServSchedulerMethod to indicate the Weighted Fair Queuing scheduling method, defined as any algorithm in which a set of queues are conceptuall… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| IfDirection | INTEGER { inbound(1), outbound(2) } | current | IfDirection specifies a direction of data travel on an interface. 'inbound' traffic is operated on during reception from the interface, while 'outbound' traffic is operated on prior to transmission on the interface. |
| IndexInteger | Unsigned32 (1..4294967295) | current | An integer which may be used as a table index. |
| IndexIntegerNextFree | always contains a legal value (if non-zero) for an index that is not currently used in the relevant table. The Command Generator (Network Management Application) reads this variable and uses the (non-zero) value read when creating a new row with an SNMP SET. When the SET is performed, the Command Responder (agent) must determine whether the value is indeed still unused; Two Network Management Applications may attempt to create a row (configuration entry) simultaneously and use the same value. If it is currently unused, the SET succeeds and the Command Responder (agent) changes the value of this object, according to an implementation-specific algorithm. If the value is in use, however, the SET fails. The Network Management Application must then re-read this variable to obtain a new usable value. | current |