MIB Viewer

IEEE8021-CFM-MIB

195 objects
Connectivity Fault Management module. Unless otherwise indicated, the references in this MIB module are to IEEE 802.1Q-2011. Copyright (C) IEEE. This version of this MIB module is part of IEEE802.1Q; see the draft itself for full legal notices.
Imported Objects
IEEE8021-TC-MIBIEEE8021VlanIndex ieee802dot1mibs
IF-MIBInterfaceIndex InterfaceIndexOrZero
LLDP-MIBLldpChassisId LldpChassisIdSubtype LldpPortId LldpPortIdSubtype
Q-BRIDGE-MIBVlanId VlanIdOrNone
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMICounter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCMacAddress RowStatus TAddress TDomain TEXTUAL-CONVENTION TimeInterval TimeStamp TruthValue
OIDNameAccessStatusDescription
1.3.111.2.802.1.1.8Identityieee8021CfmMibConnectivity Fault Management module. Unless otherwise indicated, the references in this MIB module are to IEEE 802.1Q-2011. Copyright (C) IEEE. This version o…
1.3.111.2.802.1.1.8.0Nodedot1agNotifications
1.3.111.2.802.1.1.8.0.1Notificationdot1agCfmFaultAlarmcurrentA MEP has a persistent defect condition. A notification (fault alarm) is sent to the management entity with the OID of the MEP that has detected the fault. Whe…
1.3.111.2.802.1.1.8.1Nodedot1agMIBObjects
1.3.111.2.802.1.1.8.1.1Nodedot1agCfmStack
1.3.111.2.802.1.1.8.1.1.1ScalarAnnot-accessiblecurrentA MEP can detect and report a number of defects, and multiple defects can be present at the same time. These defects are: bDefRDICCM(0) A remote MEP is reporte…
1.3.111.2.802.1.1.8.1.2Nodedot1agCfmDefaultMd
1.3.111.2.802.1.1.8.1.2.1Scalardot1agCfmDefaultMdDefLevelread-writecurrentA value indicating the MD Level at which MHFs are to be created, and Sender ID TLV transmission by those MHFs is to be controlled, for each dot1agCfmDefaultMdE…
1.3.111.2.802.1.1.8.1.2.2Scalardot1agCfmDefaultMdDefMhfCreationread-writecurrentA value indicating if the Management entity can create MHFs (MIP Half Function) for the VID, for each dot1agCfmDefaultMdEntry whose dot1agCfmDefaultMdMhfCreati…
1.3.111.2.802.1.1.8.1.2.3Scalardot1agCfmDefaultMdDefIdPermissionread-writecurrentEnumerated value indicating what, if anything, is to be included in the Sender ID TLV (21.5.3) transmitted by MHFs created by the Default Maintenance Domain, f…
1.3.111.2.802.1.1.8.1.2.4Tabledot1agCfmDefaultMdTablenot-accessibledeprecatedFor each bridge component, the Default MD Level Managed Object controls MHF creation for VIDs that are not attached to a specific Maintenance Association Manag…
1.3.111.2.802.1.1.8.1.2.4.1Rowdot1agCfmDefaultMdEntrynot-accessibledeprecatedThe Default MD Level table entry. **NOTE: this object is deprecated due to re-indexing of the table.
1.3.111.2.802.1.1.8.1.2.4.1.1Columndot1agCfmDefaultMdComponentIdnot-accessibledeprecatedThe bridge component within the system to which the information in this dot1agCfmDefaultMdEntry applies. If the system is not a Bridge, or if only one componen…
1.3.111.2.802.1.1.8.1.2.4.1.2Columndot1agCfmDefaultMdPrimaryVidnot-accessibledeprecatedThe Primary VID of the VLAN to which this entry's objects apply. **NOTE: this object is deprecated due to re-indexing of the table.
1.3.111.2.802.1.1.8.1.2.4.1.3Columndot1agCfmDefaultMdStatusread-onlydeprecatedState of this Default MD Level table entry. True if there is no entry in the Maintenance Association table defining an MA for the same VLAN ID and MD Level as …
1.3.111.2.802.1.1.8.1.2.4.1.4Columndot1agCfmDefaultMdLevelread-writedeprecatedA value indicating the MD Level at which MHFs are to be created, and Sender ID TLV transmission by those MHFs is to be controlled, for the VLAN to which this e…
1.3.111.2.802.1.1.8.1.2.4.1.5Columndot1agCfmDefaultMdMhfCreationread-writedeprecatedA value indicating if the Management entity can create MHFs (MIP Half Function) for this VID at this MD Level. If this object has the value defMHFdefer, MHF cr…
1.3.111.2.802.1.1.8.1.2.4.1.6Columndot1agCfmDefaultMdIdPermissionread-writedeprecatedEnumerated value indicating what, if anything, is to be included in the Sender ID TLV (21.5.3) transmitted by MHFs created by the Default Maintenance Domain. I…
1.3.111.2.802.1.1.8.1.3Nodedot1agCfmVlan
1.3.111.2.802.1.1.8.1.3.1Tabledot1agCfmVlanTablenot-accessibledeprecatedThis table defines the association of VIDs into VLANs. There is an entry in this table, for each component of the bridge, for each VID that is: a) a VID belong…
1.3.111.2.802.1.1.8.1.3.1.1Rowdot1agCfmVlanEntrynot-accessibledeprecatedThe VLAN table entry. **NOTE: this object is deprecated due to re-indexing of the table.
1.3.111.2.802.1.1.8.1.3.1.1.1Columndot1agCfmVlanComponentIdnot-accessibledeprecatedThe bridge component within the system to which the information in this dot1agCfmVlanEntry applies. If the system is not a Bridge, or if only one component is …
1.3.111.2.802.1.1.8.1.3.1.1.2Columndot1agCfmVlanVidnot-accessibledeprecatedThis is a VLAN ID belonging to a VLAN that is associated with more than one VLAN ID, and this is not the Primary VID of the VLAN. **NOTE: this object is deprec…
1.3.111.2.802.1.1.8.1.3.1.1.3Columndot1agCfmVlanPrimaryVidread-createdeprecatedThis is the Primary VLAN ID of the VLAN with which this entry's dot1agCfmVlanVid is associated. This value MUST not equal the value of dot1agCfmVlanVid. **NOTE…
1.3.111.2.802.1.1.8.1.3.1.1.4Columndot1agCfmVlanRowStatusread-createdeprecatedThe status of the row. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be activated…
1.3.111.2.802.1.1.8.1.4Nodedot1agCfmConfigErrorList
1.3.111.2.802.1.1.8.1.4.1Tabledot1agCfmConfigErrorListTablenot-accessibledeprecatedThe CFM Configuration Error List table provides a list of Interfaces and VIDs that are incorrectly configured. **NOTE: this object is deprecated due to re-inde…
1.3.111.2.802.1.1.8.1.4.1.1Rowdot1agCfmConfigErrorListEntrynot-accessibledeprecatedThe Config Error List Table entry **NOTE: this object is deprecated due to re-indexing of the table.
1.3.111.2.802.1.1.8.1.4.1.1.1Columndot1agCfmConfigErrorListVidnot-accessibledeprecatedThe VLAN ID of the VLAN with interfaces in error. **NOTE: this object is deprecated due to re-indexing of the table.
1.3.111.2.802.1.1.8.1.4.1.1.2Columndot1agCfmConfigErrorListIfIndexnot-accessibledeprecatedThis object is the IfIndex of the interface. Upon a restart of the system, the system SHALL, if necessary, change the value of this variable so that it indexes…
1.3.111.2.802.1.1.8.1.4.1.1.3Columndot1agCfmConfigErrorListErrorTyperead-onlydeprecatedA vector of Boolean error conditions from 22.2.4, any of which may be true: 0) CFMleak; 1) ConflictingVids; 2) ExcessiveLevels; 3) OverlappedLevels. **NOTE: th…
1.3.111.2.802.1.1.8.1.5Nodedot1agCfmMd
1.3.111.2.802.1.1.8.1.5.1Scalardot1agCfmMdTableNextIndexread-onlycurrentThis object contains an unused value for dot1agCfmMdIndex in the dot1agCfmMdTable, or a zero to indicate that none exist.
1.3.111.2.802.1.1.8.1.5.2Tabledot1agCfmMdTablenot-accessiblecurrentThe Maintenance Domain table. Each row in the table represents a different Maintenance Domain. A Maintenance Domain is described in 802.1ag (3.22) as the netwo…
1.3.111.2.802.1.1.8.1.5.2.1Rowdot1agCfmMdEntrynot-accessiblecurrentThe Maintenance Domain table entry. This entry is not lost upon reboot. It is backed up by stable storage.
1.3.111.2.802.1.1.8.1.5.2.1.1Columndot1agCfmMdIndexnot-accessiblecurrentThe index to the Maintenance Domain table. dot1agCfmMdTableNextIndex needs to be inspected to find an available index for row-creation. Referential integrity i…
1.3.111.2.802.1.1.8.1.5.2.1.2Columndot1agCfmMdFormatread-createcurrentThe type (and thereby format) of the Maintenance Domain Name.
1.3.111.2.802.1.1.8.1.5.2.1.3Columndot1agCfmMdNameread-createcurrentThe Maintenance Domain name. The type/format of this object is determined by the value of the dot1agCfmMdNameType object. Each Maintenance Domain has unique na…
1.3.111.2.802.1.1.8.1.5.2.1.4Columndot1agCfmMdMdLevelread-createcurrentThe Maintenance Domain Level.
1.3.111.2.802.1.1.8.1.5.2.1.5Columndot1agCfmMdMhfCreationread-createcurrentEnumerated value indicating whether the management entity can create MHFs (MIP Half Function) for this Maintenance Domain. Since, in this variable, there is no…
1.3.111.2.802.1.1.8.1.5.2.1.6Columndot1agCfmMdMhfIdPermissionread-createcurrentEnumerated value indicating what, if anything, is to be included in the Sender ID TLV (21.5.3) transmitted by MPs configured in this Maintenance Domain. Since,…
1.3.111.2.802.1.1.8.1.5.2.1.7Columndot1agCfmMdMaNextIndexread-onlycurrentValue to be used as the index of the MA table entries, both the dot1agCfmMaNetTable and the dot1agCfmMaCompTable, for this Maintenance Domain when the manageme…
1.3.111.2.802.1.1.8.1.5.2.1.8Columndot1agCfmMdRowStatusread-createcurrentThe status of the row. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be activated.
1.3.111.2.802.1.1.8.1.6Nodedot1agCfmMa
1.3.111.2.802.1.1.8.1.6.1Tabledot1agCfmMaNetTablenot-accessiblecurrentThe Maintenance Association table. Each row in the table represents an MA. An MA is a set of MEPs, each configured with a single service instance. This is the …
1.3.111.2.802.1.1.8.1.6.1.1Rowdot1agCfmMaNetEntrynot-accessiblecurrentThe MA table entry.
1.3.111.2.802.1.1.8.1.6.1.1.1Columndot1agCfmMaIndexnot-accessiblecurrentIndex of the MA table dot1agCfmMdMaNextIndex needs to be inspected to find an available index for row-creation.
1.3.111.2.802.1.1.8.1.6.1.1.2Columndot1agCfmMaNetFormatread-createcurrentThe type (and thereby format) of the Maintenance Association Name.
1.3.111.2.802.1.1.8.1.6.1.1.3Columndot1agCfmMaNetNameread-createcurrentThe Short Maintenance Association name. The type/format of this object is determined by the value of the dot1agCfmMaNetNameType object. This name MUST be uniqu…
1.3.111.2.802.1.1.8.1.6.1.1.4Columndot1agCfmMaNetCcmIntervalread-createcurrentInterval between CCM transmissions to be used by all MEPs in the MA.
1.3.111.2.802.1.1.8.1.6.1.1.5Columndot1agCfmMaNetRowStatusread-createcurrentThe status of the row. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be activated.
1.3.111.2.802.1.1.8.1.6.2Tabledot1agCfmMaCompTablenot-accessibledeprecatedThe Maintenance Association table. Each row in the table represents an MA. An MA is a set of MEPs, each configured with a single service instance. This is the …
1.3.111.2.802.1.1.8.1.6.2.1Rowdot1agCfmMaCompEntrynot-accessibledeprecatedThe MA table entry. **NOTE: this object is deprecated due to re-indexing of the table.
1.3.111.2.802.1.1.8.1.6.2.1.1Columndot1agCfmMaComponentIdnot-accessibledeprecatedThe bridge component within the system to which the information in this dot1agCfmMaCompEntry applies. If the system is not a Bridge, or if only one component i…
1.3.111.2.802.1.1.8.1.6.2.1.2Columndot1agCfmMaCompPrimaryVlanIdread-createdeprecatedThe Primary VLAN ID with which the Maintenance Association is associated, or 0 if the MA is not attached to any VID. If the MA is associated with more than one…
1.3.111.2.802.1.1.8.1.6.2.1.3Columndot1agCfmMaCompMhfCreationread-createdeprecatedIndicates if the Management entity can create MHFs (MIP Half Function) for this MA. **NOTE: this object is deprecated due to re-indexing of the table.
1.3.111.2.802.1.1.8.1.6.2.1.4Columndot1agCfmMaCompIdPermissionread-createdeprecatedEnumerated value indicating what, if anything, is to be included in the Sender ID TLV (21.5.3) transmitted by MPs configured in this MA. **NOTE: this object is…
1.3.111.2.802.1.1.8.1.6.2.1.5Columndot1agCfmMaCompNumberOfVidsread-createdeprecatedThe number of VIDs associated with the MA. **NOTE: this object is deprecated due to re-indexing of the table.
1.3.111.2.802.1.1.8.1.6.2.1.6Columndot1agCfmMaCompRowStatusread-createdeprecatedThe status of the row. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be activated…
1.3.111.2.802.1.1.8.1.6.3Tabledot1agCfmMaMepListTablenot-accessiblecurrentList of MEPIDs that belong to this MA. Clause 12.14.6.1.3 specifies that a list of MEPIDs in all bridges in that MA, but since SNMP SMI does not allow to state…
1.3.111.2.802.1.1.8.1.6.3.1Rowdot1agCfmMaMepListEntrynot-accessiblecurrentThe known MEPS table entry.
1.3.111.2.802.1.1.8.1.6.3.1.1Columndot1agCfmMaMepListIdentifiernot-accessiblecurrentMEPID
1.3.111.2.802.1.1.8.1.6.3.1.2Columndot1agCfmMaMepListRowStatusread-createcurrentThe status of the row. Read SNMPv2-TC (RFC1903) for an explanation of the possible values this object can take.
1.3.111.2.802.1.1.8.1.7Nodedot1agCfmMep
1.3.111.2.802.1.1.8.1.7.1Tabledot1agCfmMepTablenot-accessiblecurrentThe Maintenance Association End Point (MEP) table. Each row in the table represents a different MEP. A MEP is an actively managed CFM entity, associated with a…
1.3.111.2.802.1.1.8.1.7.1.1Rowdot1agCfmMepEntrynot-accessiblecurrentThe MEP table entry
1.3.111.2.802.1.1.8.1.7.1.1.1Columndot1agCfmMepIdentifiernot-accessiblecurrentInteger that is unique among all the MEPs in the same MA. Other definition is: a small integer, unique over a given Maintenance Association, identifying a spec…
1.3.111.2.802.1.1.8.1.7.1.1.2Columndot1agCfmMepIfIndexread-createcurrentThis object is the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, to which the MEP is attached. …
1.3.111.2.802.1.1.8.1.7.1.1.3Columndot1agCfmMepDirectionread-createcurrentThe direction in which the MEP faces on the Bridge port.
1.3.111.2.802.1.1.8.1.7.1.1.4Columndot1agCfmMepPrimaryVidread-createcurrentAn integer indicating the Primary VID of the MEP, always one of the VIDs assigned to the MEP's MA. The value 0 indicates that either the Primary VID is that of…
1.3.111.2.802.1.1.8.1.7.1.1.5Columndot1agCfmMepActiveread-createcurrentAdministrative state of the MEP A Boolean indicating the administrative state of the MEP. True indicates that the MEP is to function normally, and false that i…
1.3.111.2.802.1.1.8.1.7.1.1.6Columndot1agCfmMepFngStateread-onlycurrentCurrent state of the MEP Fault Notification Generator State Machine.
1.3.111.2.802.1.1.8.1.7.1.1.7Columndot1agCfmMepCciEnabledread-createcurrentIf set to true, the MEP will generate CCM messages.
1.3.111.2.802.1.1.8.1.7.1.1.8Columndot1agCfmMepCcmLtmPriorityread-createcurrentThe priority value for CCMs and LTMs transmitted by the MEP. Default Value is the highest priority value allowed to pass through the bridge port for any of thi…
1.3.111.2.802.1.1.8.1.7.1.1.9Columndot1agCfmMepMacAddressread-onlycurrentMAC address of the MEP.
1.3.111.2.802.1.1.8.1.7.1.1.10Columndot1agCfmMepLowPrDefread-createcurrentAn integer value specifying the lowest priority defect that is allowed to generate fault alarm.
1.3.111.2.802.1.1.8.1.7.1.1.11Columndot1agCfmMepFngAlarmTimeread-createcurrentThe time that defects MUST be present before a Fault Alarm is issued (fngAlarmTime. 20.33.3) (default 2.5s).
1.3.111.2.802.1.1.8.1.7.1.1.12Columndot1agCfmMepFngResetTimeread-createcurrentThe time that defects MUST be absent before resetting a Fault Alarm (fngResetTime, 20.33.4) (default 10s).
1.3.111.2.802.1.1.8.1.7.1.1.13Columndot1agCfmMepHighestPrDefectread-onlycurrentThe highest priority defect that has been present since the MEPs Fault Notification Generator State Machine was last in the FNG_RESET state.
1.3.111.2.802.1.1.8.1.7.1.1.14Columndot1agCfmMepDefectsread-onlycurrentA vector of Boolean error conditions from Table 20-1, any of which may be true: DefRDICCM(0) DefMACstatus(1) DefRemoteCCM(2) DefErrorCCM(3) DefXconCCM(4)
1.3.111.2.802.1.1.8.1.7.1.1.15Columndot1agCfmMepErrorCcmLastFailureread-onlycurrentThe last-received CCM that triggered an DefErrorCCM fault.
1.3.111.2.802.1.1.8.1.7.1.1.16Columndot1agCfmMepXconCcmLastFailureread-onlycurrentThe last-received CCM that triggered a DefXconCCM fault.
1.3.111.2.802.1.1.8.1.7.1.1.17Columndot1agCfmMepCcmSequenceErrorsread-onlycurrentThe total number of out-of-sequence CCMs received from all remote MEPs.
1.3.111.2.802.1.1.8.1.7.1.1.18Columndot1agCfmMepCciSentCcmsread-onlycurrentTotal number of Continuity Check messages transmitted.
1.3.111.2.802.1.1.8.1.7.1.1.19Columndot1agCfmMepNextLbmTransIdread-onlycurrentNext sequence number/transaction identifier to be sent in a Loopback message. This sequence number can be zero because it wraps around.
1.3.111.2.802.1.1.8.1.7.1.1.20Columndot1agCfmMepLbrInread-onlycurrentTotal number of valid, in-order Loopback Replies received.
1.3.111.2.802.1.1.8.1.7.1.1.21Columndot1agCfmMepLbrInOutOfOrderread-onlycurrentThe total number of valid, out-of-order Loopback Replies received.
1.3.111.2.802.1.1.8.1.7.1.1.22Columndot1agCfmMepLbrBadMsduread-onlycurrentThe total number of LBRs received whose mac_service_data_unit did not match (except for the OpCode) that of the corresponding LBM (20.2.3).
1.3.111.2.802.1.1.8.1.7.1.1.23Columndot1agCfmMepLtmNextSeqNumberread-onlycurrentNext transaction identifier/sequence number to be sent in a Linktrace message. This sequence number can be zero because it wraps around.
1.3.111.2.802.1.1.8.1.7.1.1.24Columndot1agCfmMepUnexpLtrInread-onlycurrentThe total number of unexpected LTRs received (20.39.1).
1.3.111.2.802.1.1.8.1.7.1.1.25Columndot1agCfmMepLbrOutread-onlycurrentTotal number of Loopback Replies transmitted.
1.3.111.2.802.1.1.8.1.7.1.1.26Columndot1agCfmMepTransmitLbmStatusread-createcurrentA Boolean flag set to true by the MEP Loopback Initiator State Machine or an MIB manager to indicate that another LBM is being transmitted. Reset to false by t…
1.3.111.2.802.1.1.8.1.7.1.1.27Columndot1agCfmMepTransmitLbmDestMacAddressread-createcurrentThe Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column dot1agCfmMepTransmitLbm…
1.3.111.2.802.1.1.8.1.7.1.1.28Columndot1agCfmMepTransmitLbmDestMepIdread-createcurrentThe Maintenance association End Point Identifier of another MEP in the same Maintenance Association to which the LBM is to be sent. This address will be used i…
1.3.111.2.802.1.1.8.1.7.1.1.29Columndot1agCfmMepTransmitLbmDestIsMepIdread-createcurrentTrue indicates that MEPID of the target MEP is used for Loopback transmission. False indicates that unicast destination MAC address of the target MEP is used f…
1.3.111.2.802.1.1.8.1.7.1.1.30Columndot1agCfmMepTransmitLbmMessagesread-createcurrentThe number of Loopback messages to be transmitted.
1.3.111.2.802.1.1.8.1.7.1.1.31Columndot1agCfmMepTransmitLbmDataTlvread-createcurrentAn arbitrary amount of data to be included in the Data TLV, if the Data TLV is selected to be sent. The intent is to be able to fill the frame carrying the CFM…
1.3.111.2.802.1.1.8.1.7.1.1.32Columndot1agCfmMepTransmitLbmVlanPriorityread-createcurrentPriority. 3 bit value to be used in the VLAN tag, if present in the transmitted frame. The default value is CCM priority.
1.3.111.2.802.1.1.8.1.7.1.1.33Columndot1agCfmMepTransmitLbmVlanDropEnableread-createcurrentDrop Enable bit value to be used in the VLAN tag, if present in the transmitted frame. For more information about VLAN Drop Enable, please check IEEE 802.1ad.
1.3.111.2.802.1.1.8.1.7.1.1.34Columndot1agCfmMepTransmitLbmResultOKread-onlycurrentIndicates the result of the operation: - true The Loopback Message(s) will be (or has been) sent. - false The Loopback Message(s) will not be sent.
1.3.111.2.802.1.1.8.1.7.1.1.35Columndot1agCfmMepTransmitLbmSeqNumberread-onlycurrentThe Loopback Transaction Identifier (dot1agCfmMepNextLbmTransId) of the first LBM (to be) sent. The value returned is undefined if dot1agCfmMepTransmitLbmResul…
1.3.111.2.802.1.1.8.1.7.1.1.36Columndot1agCfmMepTransmitLtmStatusread-createcurrentA Boolean flag set to true by the bridge port to indicate that another LTM may be transmitted. Reset to false by the MEP Linktrace Initiator State Machine.
1.3.111.2.802.1.1.8.1.7.1.1.37Columndot1agCfmMepTransmitLtmFlagsread-createcurrentThe flags field for LTMs transmitted by the MEP.
1.3.111.2.802.1.1.8.1.7.1.1.38Columndot1agCfmMepTransmitLtmTargetMacAddressread-createcurrentThe Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column dot1agCfmMepTransmitLtm…
1.3.111.2.802.1.1.8.1.7.1.1.39Columndot1agCfmMepTransmitLtmTargetMepIdread-createcurrentAn indication of the Target MAC Address Field to be transmitted: The Maintenance association End Point Identifier of another MEP in the same Maintenance Associ…
1.3.111.2.802.1.1.8.1.7.1.1.40Columndot1agCfmMepTransmitLtmTargetIsMepIdread-createcurrentTrue indicates that MEPID of the target MEP is used for Linktrace transmission. False indicates that unicast destination MAC address of the target MEP is used …
1.3.111.2.802.1.1.8.1.7.1.1.41Columndot1agCfmMepTransmitLtmTtlread-createcurrentThe LTM TTL field. Default value, if not specified, is 64. The TTL field indicates the number of hops remaining to the LTM. Decremented by 1 by each Linktrace …
1.3.111.2.802.1.1.8.1.7.1.1.42Columndot1agCfmMepTransmitLtmResultread-onlycurrentIndicates the result of the operation: - true The Linktrace Message will be (or has been) sent. - false The Linktrace Message will not be sent
1.3.111.2.802.1.1.8.1.7.1.1.43Columndot1agCfmMepTransmitLtmSeqNumberread-onlycurrentThe LTM Transaction Identifier (dot1agCfmMepLtmNextSeqNumber) of the LTM sent. The value returned is undefined if dot1agCfmMepTransmitLtmResult is false.
1.3.111.2.802.1.1.8.1.7.1.1.44Columndot1agCfmMepTransmitLtmEgressIdentifierread-createcurrentIdentifies the MEP Linktrace Initiator that is originating, or the Linktrace Responder that is forwarding, this LTM. The low-order six octets contain a 48-bit …
1.3.111.2.802.1.1.8.1.7.1.1.45Columndot1agCfmMepRowStatusread-createcurrentThe status of the row. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be activated.
1.3.111.2.802.1.1.8.1.7.1.1.46Columndot1agCfmMepPbbTeCanReportPbbTePresenceread-createcurrentA Boolean valued parameter that is set to true if the system has the capability to report the presence of traffic and that the capability is enabled. Traffic p…
1.3.111.2.802.1.1.8.1.7.1.1.47Columndot1agCfmMepPbbTeTrafficMismatchDefectread-onlycurrentA Boolean valued parameter that is set to true if the system has detected a traffic field mismatch defect. Mismatch detection is an optional PBB-TE feature.
1.3.111.2.802.1.1.8.1.7.1.1.48Columndot1agCfmMepPbbTransmitLbmLtmReverseVidread-createcurrentThis column specifies the value to use in the Reverse VID value field of PBB-TE MIP TLVs contained within TransmitLTM pdus.
1.3.111.2.802.1.1.8.1.7.1.1.49Columndot1agCfmMepPbbTeMismatchAlarmread-createcurrentA Boolean valued parameter that is set to true if the system is to allow a mismatch defect to generate a fault alarm.
1.3.111.2.802.1.1.8.1.7.1.1.50Columndot1agCfmMepPbbTeLocalMismatchDefectread-onlycurrentA Boolean valued parameter that is set to true if the system has detected a local mismatch defect. Mismatch detection is an optional PBB-TE feature.
1.3.111.2.802.1.1.8.1.7.1.1.51Columndot1agCfmMepPbbTeMismatchSinceResetread-onlycurrentA Boolean valued parameter indicating if the mismatch defect has been present since the MEP Mismatch Fault Notification Generator was last in the MFNG_RESET st…
1.3.111.2.802.1.1.8.1.7.2Tabledot1agCfmLtrTablenot-accessiblecurrentThis table extends the MEP table and contains a list of Linktrace replies received by a specific MEP in response to a linktrace message. SNMP SMI does not allo…
1.3.111.2.802.1.1.8.1.7.2.1Rowdot1agCfmLtrEntrynot-accessiblecurrentThe Linktrace Reply table entry.
1.3.111.2.802.1.1.8.1.7.2.1.1Columndot1agCfmLtrSeqNumbernot-accessiblecurrentTransaction identifier/Sequence number returned by a previous transmit linktrace message command, indicating which LTM's response is going to be returned.
1.3.111.2.802.1.1.8.1.7.2.1.2Columndot1agCfmLtrReceiveOrdernot-accessiblecurrentAn index to distinguish among multiple LTRs with the same LTR Transaction Identifier field value. dot1agCfmLtrReceiveOrder are assigned sequentially from 1, in…
1.3.111.2.802.1.1.8.1.7.2.1.3Columndot1agCfmLtrTtlread-onlycurrentTTL field value for a returned LTR.
1.3.111.2.802.1.1.8.1.7.2.1.4Columndot1agCfmLtrForwardedread-onlycurrentIndicates if a LTM was forwarded by the responding MP, as returned in the 'FwdYes' flag of the flags field.
1.3.111.2.802.1.1.8.1.7.2.1.5Columndot1agCfmLtrTerminalMepread-onlycurrentA Boolean value stating whether the forwarded LTM reached a MEP enclosing its MA, as returned in the Terminal MEP flag of the Flags field.
1.3.111.2.802.1.1.8.1.7.2.1.6Columndot1agCfmLtrLastEgressIdentifierread-onlycurrentAn octet field holding the Last Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. The Last Egress Identifier identifies the MEP Linktrace…
1.3.111.2.802.1.1.8.1.7.2.1.7Columndot1agCfmLtrNextEgressIdentifierread-onlycurrentAn octet field holding the Next Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. The Next Egress Identifier Identifies the Linktrace Res…
1.3.111.2.802.1.1.8.1.7.2.1.8Columndot1agCfmLtrRelayread-onlycurrentValue returned in the Relay Action field.
1.3.111.2.802.1.1.8.1.7.2.1.9Columndot1agCfmLtrChassisIdSubtyperead-onlycurrentThis object specifies the format of the Chassis ID returned in the Sender ID TLV of the LTR, if any. This value is meaningless if the dot1agCfmLtrChassisId has…
1.3.111.2.802.1.1.8.1.7.2.1.10Columndot1agCfmLtrChassisIdread-onlycurrentThe Chassis ID returned in the Sender ID TLV of the LTR, if any. The format of this object is determined by the value of the dot1agCfmLtrChassisIdSubtype objec…
1.3.111.2.802.1.1.8.1.7.2.1.11Columndot1agCfmLtrManAddressDomainread-onlycurrentThe TDomain that identifies the type and format of the related dot1agCfmMepDbManAddress object, used to access the SNMP agent of the system transmitting the LT…
1.3.111.2.802.1.1.8.1.7.2.1.12Columndot1agCfmLtrManAddressread-onlycurrentThe TAddress that can be used to access the SNMP agent of the system transmitting the CCM, received in the CCM Sender ID TLV from that system. If the related o…
1.3.111.2.802.1.1.8.1.7.2.1.13Columndot1agCfmLtrIngressread-onlycurrentThe value returned in the Ingress Action Field of the LTM. The value ingNoTlv(0) indicates that no Reply Ingress TLV was returned in the LTM.
1.3.111.2.802.1.1.8.1.7.2.1.14Columndot1agCfmLtrIngressMacread-onlycurrentMAC address returned in the ingress MAC address field. If the dot1agCfmLtrIngress object contains the value ingNoTlv(0), then the contents of this object are m…
1.3.111.2.802.1.1.8.1.7.2.1.15Columndot1agCfmLtrIngressPortIdSubtyperead-onlycurrentFormat of the Ingress Port ID. If the dot1agCfmLtrIngress object contains the value ingNoTlv(0), then the contents of this object are meaningless.
1.3.111.2.802.1.1.8.1.7.2.1.16Columndot1agCfmLtrIngressPortIdread-onlycurrentIngress Port ID. The format of this object is determined by the value of the dot1agCfmLtrIngressPortIdSubtype object. If the dot1agCfmLtrIngress object contain…
1.3.111.2.802.1.1.8.1.7.2.1.17Columndot1agCfmLtrEgressread-onlycurrentThe value returned in the Egress Action Field of the LTM. The value egrNoTlv(0) indicates that no Reply Egress TLV was returned in the LTM.
1.3.111.2.802.1.1.8.1.7.2.1.18Columndot1agCfmLtrEgressMacread-onlycurrentMAC address returned in the egress MAC address field. If the dot1agCfmLtrEgress object contains the value egrNoTlv(0), then the contents of this object are mea…
1.3.111.2.802.1.1.8.1.7.2.1.19Columndot1agCfmLtrEgressPortIdSubtyperead-onlycurrentFormat of the egress Port ID. If the dot1agCfmLtrEgress object contains the value egrNoTlv(0), then the contents of this object are meaningless.
1.3.111.2.802.1.1.8.1.7.2.1.20Columndot1agCfmLtrEgressPortIdread-onlycurrentEgress Port ID. The format of this object is determined by the value of the dot1agCfmLtrEgressPortIdSubtype object. If the dot1agCfmLtrEgress object contains t…
1.3.111.2.802.1.1.8.1.7.2.1.21Columndot1agCfmLtrOrganizationSpecificTlvread-onlycurrentAll Organization specific TLVs returned in the LTR, if any. Includes all octets including and following the TLV Length field of each TLV, concatenated together.
1.3.111.2.802.1.1.8.1.7.3Tabledot1agCfmMepDbTablenot-accessiblecurrentThe MEP Database. A database, maintained by every MEP, that maintains received information about other MEPs in the Maintenance Domain. The SMI does not allow t…
1.3.111.2.802.1.1.8.1.7.3.1Rowdot1agCfmMepDbEntrynot-accessiblecurrentThe MEP Database table entry.
1.3.111.2.802.1.1.8.1.7.3.1.1Columndot1agCfmMepDbRMepIdentifiernot-accessiblecurrentMaintenance association End Point Identifier of a remote MEP whose information from the MEP Database is to be returned.
1.3.111.2.802.1.1.8.1.7.3.1.2Columndot1agCfmMepDbRMepStateread-onlycurrentThe operational state of the remote MEP IFF State machines.
1.3.111.2.802.1.1.8.1.7.3.1.3Columndot1agCfmMepDbRMepFailedOkTimeread-onlycurrentThe time (SysUpTime) at which the IFF Remote MEP state machine last entered either the RMEP_FAILED or RMEP_OK state.
1.3.111.2.802.1.1.8.1.7.3.1.4Columndot1agCfmMepDbMacAddressread-onlycurrentThe MAC address of the remote MEP.
1.3.111.2.802.1.1.8.1.7.3.1.5Columndot1agCfmMepDbRdiread-onlycurrentState of the RDI bit in the last received CCM (true for RDI=1), or false if none has been received.
1.3.111.2.802.1.1.8.1.7.3.1.6Columndot1agCfmMepDbPortStatusTlvread-onlycurrentAn enumerated value of the Port status TLV received in the last CCM from the remote MEP or the default value psNoPortStateTLV indicating either no CCM has been…
1.3.111.2.802.1.1.8.1.7.3.1.7Columndot1agCfmMepDbInterfaceStatusTlvread-onlycurrentAn enumerated value of the Interface status TLV received in the last CCM from the remote MEP or the default value isNoInterfaceStatus TLV indicating either no …
1.3.111.2.802.1.1.8.1.7.3.1.8Columndot1agCfmMepDbChassisIdSubtyperead-onlycurrentThis object specifies the format of the Chassis ID received in the last CCM.
1.3.111.2.802.1.1.8.1.7.3.1.9Columndot1agCfmMepDbChassisIdread-onlycurrentThe Chassis ID. The format of this object is determined by the value of the dot1agCfmLtrChassisIdSubtype object.
1.3.111.2.802.1.1.8.1.7.3.1.10Columndot1agCfmMepDbManAddressDomainread-onlycurrentThe TDomain that identifies the type and format of the related dot1agCfmMepDbManAddress object, used to access the SNMP agent of the system transmitting the CC…
1.3.111.2.802.1.1.8.1.7.3.1.11Columndot1agCfmMepDbManAddressread-onlycurrentThe TAddress that can be used to access the SNMP agent of the system transmitting the CCM, received in the CCM Sender ID TLV from that system. If the related o…
1.3.111.2.802.1.1.8.1.7.3.1.12Columndot1agCfmMepDbRMepIsActiveread-writecurrentA Boolean value stating if the remote MEP is active.
1.3.111.2.802.1.1.8.2Nodedot1agCfmConformance
1.3.111.2.802.1.1.8.2.1Nodedot1agCfmCompliances
1.3.111.2.802.1.1.8.2.1.1Compliancedot1agCfmCompliancenot-accessibledeprecatedThe compliance statement for support of the CFM MIB module.
1.3.111.2.802.1.1.8.2.2Nodedot1agCfmGroups
1.3.111.2.802.1.1.8.2.2.1Groupdot1agCfmStackGroupdeprecatedObjects for the Stack group.
1.3.111.2.802.1.1.8.2.2.2Groupdot1agCfmDefaultMdGroupdeprecatedObjects for the Default MD Level group.
1.3.111.2.802.1.1.8.2.2.3Groupdot1agCfmVlanIdGroupdeprecatedObjects for the VLAN ID group.
1.3.111.2.802.1.1.8.2.2.4Groupdot1agCfmConfigErrorListGroupdeprecatedObjects for the CFM Configuration Error List Group.
1.3.111.2.802.1.1.8.2.2.5Groupdot1agCfmMdGroupcurrentObjects for the Maintenance Domain Group.
1.3.111.2.802.1.1.8.2.2.6Groupdot1agCfmMaGroupdeprecatedObjects for the MA group.
1.3.111.2.802.1.1.8.2.2.7Groupdot1agCfmMepGroupcurrentObjects for the MEP group.
1.3.111.2.802.1.1.8.2.2.8Groupdot1agCfmMepDbGroupcurrentObjects for the MEP group.
1.3.111.2.802.1.1.8.2.2.9Groupdot1agCfmNotificationsGroupcurrentObjects for the Notifications group.
1.3.111.2.802.1.1.8.2.2.10Groupieee8021CfmMaNetGroupcurrentObjects for the MA Net group.
1.3.111.2.802.1.1.8.2.2.11Groupieee8021CfmDefaultMdDefGroupcurrentObjects for the Default MD default Level group.
1.3.111.2.802.1.1.8.2.2.12Groupieee8021CfmPbbTeExtensionGroupcurrentObjects needed for systems that support PBB-TE CFM functionality.
1.3.111.2.802.1.1.8.2.2.13Groupieee8021CfmPbbTeTrafficBitGroupcurrentObjects needed for PBB-TE supporting systems that support the optional traffic bit.
Type Definitions
NameSyntaxStatusDescription
Dot1afCfmIndexIntegerNextFreealways contains a legal value (if non-zero) for an index that is not currently used in the relevant table. The Command Generator (Network Management Application) reads this variable and uses the (non-zero) value read when creating a new row with an SNMP SET. When the SET is performed, the Command Responder (agent) MUST determine whether the value is indeed still unused; Two Network Management Applications may attempt to create a row (configuration entry) simultaneously and use the same value. If it is currently unused, the SET succeeds and the Command Responder (agent) changes the value of this object, according to an implementation-specific algorithm. If the value is in use, however, the SET fails. The Network Management Application MUST then re-read this variable to obtain a new usable value.current
Dot1agCfmCcmIntervalINTEGER { intervalInvalid (0), interval300Hz (1), interval10ms (2), interval100ms (3), interval1s (4), interval10s (5), interval1min (6), interval10min (7) }currentIndicates the interval at which CCMs are sent by a MEP. The possible values are: intervalInvalid(0) No CCMs are sent (disabled). interval300Hz(1) CCMs are sent every 3 1/3 milliseconds (300Hz). interval10ms(2) CCMs are …
Dot1agCfmConfigErrorsBITS { cfmLeak(0), conflictingVids(1), excessiveLevels(2), overlappedLevels(3) }currentWhile making the MIP creation evaluation described in 802.1ag clause 22.2.3, the management entity can encounter errors in the configuration. These are possible errors that can be encountered: CFMleak(0) MA x is associa…
Dot1agCfmEgressActionFieldValueINTEGER { egrNoTlv (0), egrOK (1), egrDown (2), egrBlocked (3), egrVid (4) } Dot1agCfmRemoteMepState::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Operational state of the remote MEP state machine. This state machine monitors the reception of valid CCMs from a remote MEP with a specific MEPID. It uses a timer that expires in 3.5 times the length of time indicated by the dot1agCfmMaNetCcmInterval object. rMepIdle(1) Momentary state during reset. rMepStart(2) The timer has not expired since the state machine was reset, and no valid CCM has yet been received. rMepFailed(3) The timer has expired, both since the state machine was reset, and since a valid CCM was received. rMepOk(4) The timer has not expired since a valid CCM was received. " REFERENCE "802.1ag clauses 12.14.7.6.3:b, 20.22" SYNTAX INTEGER { rMepIdle (1), rMepStart (2), rMepFailed (3), rMepOk (4) }currentPossible values returned in the egress action field
Dot1agCfmFngStateINTEGER { fngReset (1), fngDefect (2), fngReportDefect (3), fngDefectReported (4), fngDefectClearing (5) }currentIndicates the diferent states of the MEP Fault Notification Generator State Machine. fngReset(1) No defect has been present since the dot1agCfmMepFngResetTime timer expired, or since the state machine was last reset. fn…
Dot1agCfmHighestDefectPriINTEGER { none (0), defRDICCM (1), defMACstatus (2), defRemoteCCM (3), defErrorCCM (4), defXconCCM (5) }currentAn enumerated value, equal to the contents of the variable highestDefect (20.33.9 and Table 20-1), indicating the highest-priority defect that has been present since the MEP Fault Notification Generator State Machine wa…
Dot1agCfmIdPermissionINTEGER { sendIdNone (1), sendIdChassis (2), sendIdManage (3), sendIdChassisManage (4), sendIdDefer (5) }currentIndicates what, if anything, is to be included in the Sender ID TLV transmitted in CCMs, LBMs, LTMs, and LTRs. The valid values are: sendIdNone(1) The Sender ID TLV is not to be sent. sendIdChassis(2) The Chassis ID Len…
Dot1agCfmIngressActionFieldValueINTEGER { ingNoTlv (0), ingOk (1), ingDown (2), ingBlocked (3), ingVid (4) }currentPossible values returned in the ingress action field.
Dot1agCfmInterfaceStatusINTEGER { isNoInterfaceStatusTLV (0), isUp (1), isDown (2), isTesting (3), isUnknown (4), isDormant (5), isNotPresent (6), isLowerLayerDown (7) }currentAn enumerated value from the Interface Status TLV from the last CCM received from the last MEP. It indicates the status of the Interface within which the MEP transmitting the CCM is configured, or the next lower Interfa…
Dot1agCfmLowestAlarmPriINTEGER { allDef (1), macRemErrXcon (2), remErrXcon (3), errXcon (4), xcon (5), noXcon (6) }currentAn integer value specifying the lowest priority defect that is allowed to generate a Fault Alarm (20.9.5), either: allDef(1) DefRDICCM, DefMACstatus, DefRemoteCCM, DefErrorCCM, and DefXconCCM; macRemErrXcon(2) Only DefM…
Dot1agCfmMaintAssocNameOCTET STRING (SIZE(1..45))currentDenotes a generic Maintenance Association Name. It is the part of the Maintenance Association Identifier which is unique within the Maintenance Domain Name and is appended to the Maintenance Domain Name to form the Main…
Dot1agCfmMaintAssocNameTypeINTEGER { primaryVid (1), charString (2), unsignedInt16 (3), rfc2865VpnId (4), ICCformat (32) }currentA value that represents a type (and thereby the format) of a Dot1agCfmMaintAssocName. The value can be one of the following: ieeeReserved(0) Reserved for definition by IEEE 802.1 recommend to not use zero unless absolut…
Dot1agCfmMaintDomainNameOCTET STRING (SIZE(1..43))currentDenotes a generic Maintenance Domain Name. A Dot1agCfmMaintDomainName value is always interpreted within the context of a Dot1agCfmMaintDomainNameType value. Every usage of the Dot1agCfmMaintDomainName textual conventio…
Dot1agCfmMaintDomainNameTypeINTEGER { none (1), dnsLikeName (2), macAddressAndUint (3), charString (4) }currentA value that represents a type (and thereby the format) of a Dot1agCfmMaintDomainName. The value can be one of the following: ieeeReserved(0) Reserved for definition by IEEE 802.1 recommend to not use zero unless absolu…
Dot1agCfmMDLevelInteger32 (0..7)currentInteger identifying the Maintenance Domain Level (MD Level). Higher numbers correspond to higher Maintenance Domains, those with the greatest physical reach, with the highest values for customers' CFM PDUs. Lower number…
Dot1agCfmMDLevelOrNoneInteger32 (-1 | 0..7)currentInteger identifying the Maintenance Domain Level (MD Level). Higher numbers correspond to higher Maintenance Domains, those with the greatest physical reach, with the highest values for customers' CFM packets. Lower num…
Dot1agCfmMepDefectsBITS { bDefRDICCM(0), bDefMACstatus(1), bDefRemoteCCM(2), bDefErrorCCM(3), bDefXconCCM(4) }currentA MEP can detect and report a number of defects, and multiple defects can be present at the same time. These defects are: bDefRDICCM(0) A remote MEP is reported the RDI bit in its last CCM. bDefMACstatus(1) Either some …
Dot1agCfmMepIdUnsigned32 (1..8191)currentMaintenance association End Point Identifier (MEPID): A small integer, unique over a given Maintenance Association, identifying a specific MEP.
Dot1agCfmMepIdOrZeroUnsigned32 (0 | 1..8191)currentMaintenance association End Point Identifier (MEPID): A small integer, unique over a given Maintenance Association, identifying a specific MEP. The special value 0 is allowed to indicate special cases, for example that …
Dot1agCfmMhfCreationINTEGER { defMHFnone (1), defMHFdefault (2), defMHFexplicit (3), defMHFdefer (4) }currentIndicates if the Management Entity can create MHFs. The valid values are: defMHFnone(1) No MHFs can be created for this VID. defMHFdefault(2) MHFs can be created on this VID on any Bridge port through which this VID can…
Dot1agCfmMpDirectionINTEGER { down (1), up (2) }currentIndicates the direction in which the Maintenance association (MEP or MIP) faces on the bridge port: down(1) Sends Continuity Check Messages away from the MAC Relay Entity. up(2) Sends Continuity Check Messages towards t…
Dot1agCfmPbbComponentIdentifierUnsigned32 (1..4294967295)currentA Provider Backbone Bridge (PBB) can comprise a number of components, each of which can be managed in a manner essentially equivalent to an 802.1Q bridge. In order to access these components easily, an index is used in …
Dot1agCfmPortStatusINTEGER { psNoPortStateTLV (0), psBlocked (1), psUp (2) }currentAn enumerated value from he Port Status TLV from the last CCM received from the last MEP. It indicates the ability of the Bridge Port on which the transmitting MEP resides to pass ordinary data, regardless of the status…
Dot1agCfmRelayActionFieldValueINTEGER { rlyHit (1), rlyFdb (2), rlyMpdb (3) }currentPossible values the Relay action field can take.
MIB Viewer