This object is a set of system LED indicators. The first two octets are defined as the system LED. The first indicator is the power LED. The second indicator is the console LED. The other octets are defined as follow: Starting on the third octet indicates the logical port LED (following dot1dBasePort ordering). Every two bytes are presented to a port. The first byte is presented to the Link/Activity LED. The second byte is presented to the Speed LED. Link/Activity LED: The most significant bit is used for blink/solid: 8 = The LED blinks. The second significant bit is used for link status: 1 = link fail. 2 = link pass. Speed LED: 01 = 10Mbps. 02 = 100Mbps. 03 = 1000Mbps. The four remaining bits are currently unused and must be 0.