A3COM0021-PORT-SECURITY
17 objects
No module-level DESCRIPTION found.
Imported Objects
| A3COM0004-GENERIC | securePort |
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| SNMP-REPEATER-MIB | rptrPortAdminStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.10.22.1 | TablesecurePortTable | not-accessible | mandatory | This table defines the security status of each secure port. Each port can have a number of authorised MAC addresses, and these are stored in the secureAddressT… |
| 1.3.6.1.4.1.43.10.22.1.1 | RowsecurePortEntry | not-accessible | mandatory | There is a row in this table for each secure port, and allows repeater ports to be configured for security on a per port basis. It is indexed using the objects… |
| 1.3.6.1.4.1.43.10.22.1.1.1 | ColumnsecureSlotIndex | read-only | mandatory | The slot or unit number of the secure port. This is the first index into the securePortTable. |
| 1.3.6.1.4.1.43.10.22.1.1.2 | ColumnsecurePortIndex | read-only | mandatory | The port number of the secure port. This is the second index into the securePortTable. |
| 1.3.6.1.4.1.43.10.22.1.1.3 | ColumnsecurePortMode | read-write | mandatory | Determines the learning and security modes of the port. See secureNeedToKnowMode and secureIntrusionAction to configure Need To Know and Intrusion Action on ea… |
| 1.3.6.1.4.1.43.10.22.1.1.4 | ColumnsecureNeedToKnowMode | read-write | mandatory | Attribute to determine which frames are to be forwarded to this port intact. 1 - Need To Know is not available. 2 - All frames. 3 - Frames addressed to the aut… |
| 1.3.6.1.4.1.43.10.22.1.1.5 | ColumnsecureIntrusionAction | read-write | mandatory | Attribute to determine the action if an unauthorised device tranmsits on this port. |
| 1.3.6.1.4.1.43.10.22.1.1.6 | ColumnsecureNumberAddresses | read-write | mandatory | The maximum number of addresses that the port can learn or store. Reducing this number may cause some addresses to be deleted. This value is set by the user an… |
| 1.3.6.1.4.1.43.10.22.1.1.7 | ColumnsecureNumberAddressesStored | read-only | mandatory | The number of addresses that are currently in the AddressTable for this port. If this object has the same value as secureNumberAddresses, then no more addresse… |
| 1.3.6.1.4.1.43.10.22.1.1.8 | ColumnsecureMaximumAddresses | read-only | mandatory | This indicates the maximum value that secureNumberAddresses can be set to. It is dependent on the resources available so may change, eg. if resources are share… |
| 1.3.6.1.4.1.43.10.22.2 | TablesecureAddressTable | not-accessible | mandatory | This table which stores the MAC addresses assigned to each port. Addresses will normally defined as authorised, and describe the devices which are permitted to… |
| 1.3.6.1.4.1.43.10.22.2.1 | RowsecureAddressEntry | not-accessible | mandatory | This table allows multiple addresses to be assigned to each secure port. It is indexed using the objects secureAddrSlotIndex, secureAddrPortIndex and secureAdd… |
| 1.3.6.1.4.1.43.10.22.2.1.1 | ColumnsecureAddrSlotIndex | read-only | mandatory | The slot or unit number of the secure port. This is the first index into the secureAddressTable. |
| 1.3.6.1.4.1.43.10.22.2.1.2 | ColumnsecureAddrPortIndex | read-only | mandatory | The port number of the secure port. This is the second index into the secureAddressTable. |
| 1.3.6.1.4.1.43.10.22.2.1.3 | ColumnsecureAddrMAC | read-only | mandatory | The MAC address of a station assigned to this port. This is the third index into the secureAddressTable. |
| 1.3.6.1.4.1.43.10.22.2.1.4 | ColumnsecureAddrRowStatus | read-write | mandatory | This manages the creation and deletion or rows, and shows the current status of the indexed MAC address. This object has the following values. 1 - The indexed … |
| 1.3.6.1.4.1.43.10.22.3 | ScalarsecureStop | read-only | mandatory | A MIB object to speed up access to the security tables. When performing a get-next through the table, this object is accessed as soon as the table is passed an… |