A3Com-System-r8-MIB
176 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises IpAddress TimeTicks |
| RFC1213-MIB | DisplayString |
| RFC1286-MIB MISSING | MacAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43 | Nodea3Com | |||
| 1.3.6.1.4.1.43.2 | NodebrouterMIB | |||
| 1.3.6.1.4.1.43.2.13 | Nodea3ComSys | |||
| 1.3.6.1.4.1.43.2.13.1 | Nodea3ComSysID | |||
| 1.3.6.1.4.1.43.2.13.1.1 | Scalara3sysVersion | read-only | mandatory | A text string containing general system information, including the package identifier and the system's software release number. |
| 1.3.6.1.4.1.43.2.13.1.2 | Scalara3sysPlatformDescr | read-only | mandatory | A text string describing the physical platform or chassis on which the system is running. |
| 1.3.6.1.4.1.43.2.13.1.3 | Scalara3sysPlatformID | read-only | mandatory | An OID defining the system platform. |
| 1.3.6.1.4.1.43.2.13.1.4 | Scalara3sysCallerID | read-write | mandatory | A text string defined by the user. This string can be used by a system running PPP as a unique identification of itself to its peer when communicating over a P… |
| 1.3.6.1.4.1.43.2.13.2 | Nodea3ComChip | |||
| 1.3.6.1.4.1.43.2.13.2.1 | Tablea3sysChipTable | not-accessible | mandatory | This table contains information about the chips that are used in the CPU board of the system. |
| 1.3.6.1.4.1.43.2.13.2.1.1 | Rowa3sysChipEntry | not-accessible | mandatory | Each entry in this table contains information about one of the chips installed in the CPU module. |
| 1.3.6.1.4.1.43.2.13.2.1.1.1 | Columna3sysChipSlotIndex | read-only | mandatory | This identifies a specific slot (and hence, a specific board). All the Chips described with this index are located on a single board. |
| 1.3.6.1.4.1.43.2.13.2.1.1.2 | Columna3sysChipIndex | read-only | mandatory | This identifies a specific chip on the board identified by a3sysChipSlotIndex. |
| 1.3.6.1.4.1.43.2.13.2.1.1.3 | Columna3sysChipName | read-only | mandatory | This provides a readable name for the chip. |
| 1.3.6.1.4.1.43.2.13.2.1.1.4 | Columna3sysChipDescr | read-only | mandatory | This provides general information about the chip, including its part number and revision number. |
| 1.3.6.1.4.1.43.2.13.3 | Nodea3ComMem | |||
| 1.3.6.1.4.1.43.2.13.3.1 | Tablea3sysMemTable | not-accessible | mandatory | This table contains information about the system's memory configurations. |
| 1.3.6.1.4.1.43.2.13.3.1.1 | Rowa3sysMemEntry | not-accessible | mandatory | Each entry in this table contains information about a specific memory component. The information includes the memory type, its starting address and its size. |
| 1.3.6.1.4.1.43.2.13.3.1.1.1 | Columna3sysMemSlotIndex | read-only | mandatory | This identifies the slot (and hence the board) that supports the memory elements identified by this entry in the table. |
| 1.3.6.1.4.1.43.2.13.3.1.1.2 | Columna3sysMemIndex | read-only | mandatory | The index into this table. Each memory component is identified by a unique value of this object. This is specific to the board identified by a3sysMemSlotIndex. |
| 1.3.6.1.4.1.43.2.13.3.1.1.3 | Columna3sysMemType | read-only | mandatory | This object identifies the type of the memory component. |
| 1.3.6.1.4.1.43.2.13.3.1.1.4 | Columna3sysMemStartAdd | read-only | mandatory | The starting address of the memory component. |
| 1.3.6.1.4.1.43.2.13.3.1.1.5 | Columna3sysMemSize | read-only | mandatory | The size of the memory component, in bytes. |
| 1.3.6.1.4.1.43.2.13.4 | Nodea3ComBrd | |||
| 1.3.6.1.4.1.43.2.13.4.1 | Scalara3sysSlotNumber | read-only | mandatory | The number of slots (empty or not) in the system |
| 1.3.6.1.4.1.43.2.13.4.2 | Tablea3sysBrdTable | not-accessible | mandatory | A table that contains information about the IO boards in this system. |
| 1.3.6.1.4.1.43.2.13.4.2.1 | Rowa3sysBrdEntry | not-accessible | mandatory | A list of information for each IO board in the system. |
| 1.3.6.1.4.1.43.2.13.4.2.1.1 | Columna3sysSlotIndex | read-only | mandatory | The slot number which this board occupies. |
| 1.3.6.1.4.1.43.2.13.4.2.1.2 | Columna3sysBrdDescr | read-only | mandatory | This contains general information about the Board, including the model type, the serial number, and manufacturing information. |
| 1.3.6.1.4.1.43.2.13.4.2.1.3 | Columna3sysBrdPathCapacity | read-only | mandatory | The number of physical ports supported by this board. |
| 1.3.6.1.4.1.43.2.13.4.2.1.4 | Columna3sysBrdOID | read-only | mandatory | The Object Identifier assigned to this Board. |
| 1.3.6.1.4.1.43.2.13.4.2.1.5 | Columna3sysBrdReset | read-write | mandatory | When this object is set to reset(2), the IO board in the slot specified by this instance identifier of this object is reset. If a GET request is sent for the v… |
| 1.3.6.1.4.1.43.2.13.4.2.1.6 | Columna3sysBrdFwVers | read-only | mandatory | This object returns the version of the firmware that is running on this network interface board. A list of all the OIDs assigned to 3Com router firmware can be… |
| 1.3.6.1.4.1.43.2.13.5 | Nodea3ComAudit | |||
| 1.3.6.1.4.1.43.2.13.5.1 | Scalara3sysAuditTrailType | read-write | mandatory | This object allows the user to determine the format of the time/date stamp that is included with each audit trail message the system generates. This only appli… |
| 1.3.6.1.4.1.43.2.13.5.2 | Scalara3sysLogServerAddress | read-write | deprecated | The address of the NCS or the RBCS that serves as the log server for the system. The log server receives all of the system's audit trail messages. |
| 1.3.6.1.4.1.43.2.13.6 | Nodea3ComTime | |||
| 1.3.6.1.4.1.43.2.13.6.1 | Scalara3sysDate | read-write | mandatory | The current date and time as reflected by the system clock. The date is displayed via the User interface and Audit Trail Messages as yy/mm/dd hh:mm[:ss]. This … |
| 1.3.6.1.4.1.43.2.13.6.2 | Scalara3sysDSTime | read-write | mandatory | This parameter specifies the displacement, in minutes, from non-daylight savings time. The a3sysDSTime object, along with the a3sysTimeZone object, allows the … |
| 1.3.6.1.4.1.43.2.13.6.3 | Scalara3sysTimeZone | read-write | mandatory | This object specifies the number of minutes displacement west of Greenwich the system's site is located. A negative number for this parameter indicates how man… |
| 1.3.6.1.4.1.43.2.13.7 | Nodea3ComAccCtl | |||
| 1.3.6.1.4.1.43.2.13.7.1 | Scalara3sysRemoteAccess | read-write | mandatory | This object determines whether another device can access this system via REMOTE |
| 1.3.6.1.4.1.43.2.13.7.2 | Scalara3sysTelnetAccess | read-write | mandatory | This object determines whether another device can access this system via TELNET |
| 1.3.6.1.4.1.43.2.13.7.3 | Scalara3sysConsoleAccess | read-write | mandatory | This object determines whether another device can access this system via the Console |
| 1.3.6.1.4.1.43.2.13.7.4 | Scalara3sysSNMPAccess | read-write | mandatory | This object determines whether another device can access this system via SNMP. Note, once SNMP access is disabled, the NMS will no longer be able to access thi… |
| 1.3.6.1.4.1.43.2.13.7.5 | Tablea3sysSNMPCommTable | not-accessible | mandatory | This table contains all the community strings known to the SNMP agent. |
| 1.3.6.1.4.1.43.2.13.7.5.1 | Rowa3sysSNMPCommEntry | not-accessible | mandatory | Each entry in the table contains information about a single community string. |
| 1.3.6.1.4.1.43.2.13.7.5.1.1 | Columna3sysSNMPCommString | read-only | mandatory | This identifies a specific community string. |
| 1.3.6.1.4.1.43.2.13.7.5.1.2 | Columna3sysSNMPCommAccess | read-write | mandatory | This identifies the level of access allowed for this community string. |
| 1.3.6.1.4.1.43.2.13.7.5.1.3 | Columna3sysSNMPCommTrap | read-write | mandatory | This specifies which traps get sent to the managers specified by this community string. |
| 1.3.6.1.4.1.43.2.13.7.5.1.4 | Columna3sysSNMPCommStatus | read-write | mandatory | This object is used to add and delete entries in this table. See the notes describing RowStatus at the beginning of this MIB. |
| 1.3.6.1.4.1.43.2.13.7.6 | Tablea3sysSNMPMgrTable | not-accessible | mandatory | This table contains the Managers that are allowed to use the community strings identified in a3sysSNMPCommTable. Each Manager is identified by its IP address. |
| 1.3.6.1.4.1.43.2.13.7.6.1 | Rowa3sysSNMPMgrEntry | not-accessible | mandatory | Each entry identifies a single Manager, community string pair. |
| 1.3.6.1.4.1.43.2.13.7.6.1.1 | Columna3sysSNMPMgrCommString | read-only | mandatory | This identifies a specific community string. |
| 1.3.6.1.4.1.43.2.13.7.6.1.2 | Columna3sysSNMPMgrAddress | read-only | mandatory | This identifies a single Management station that is allowed to use the community string associated with this entry. The set of all entries with same value of a… |
| 1.3.6.1.4.1.43.2.13.7.6.1.3 | Columna3sysSNMPMgrMask | read-write | mandatory | This object can be used to mask part of the IP address specified by a3sysSNMPMgrAddress. The use of this mask can then be used to identify a range of addresses… |
| 1.3.6.1.4.1.43.2.13.7.6.1.4 | Columna3sysSNMPMgrStatus | read-write | mandatory | This object is used to add and delete entries in this table. See the notes describing RowStatus at the beginning of this MIB for specific instructions on how t… |
| 1.3.6.1.4.1.43.2.13.7.7 | Tablea3sysTelnetMgrTable | not-accessible | mandatory | This table contains the IP addresses that are allowed to use Telnet to access to the NetBuilder in the TelnetManager table. |
| 1.3.6.1.4.1.43.2.13.7.7.1 | Rowa3sysTelnetMgrEntry | not-accessible | mandatory | Each entry identifies a single Manager, community string pair. |
| 1.3.6.1.4.1.43.2.13.7.7.1.1 | Columna3sysTelnetMgrAddress | read-only | mandatory | This identifies a single Management station that is allowed to use the Telnet to manage the NetBuilder. Maximally, six (6) IP addresses can be configured in ea… |
| 1.3.6.1.4.1.43.2.13.7.7.1.2 | Columna3sysTelnetMgrStatus | read-write | mandatory | This object is used to add and delete entries in this table. See the notes describing RowStatus at the beginning of this MIB for specific instructions on how t… |
| 1.3.6.1.4.1.43.2.13.7.8 | Tablea3sysPasswordTable | not-accessible | mandatory | This table contains the system's passwords. |
| 1.3.6.1.4.1.43.2.13.7.8.1 | Rowa3sysPasswordEntry | not-accessible | mandatory | Each entry identifies a single system password. |
| 1.3.6.1.4.1.43.2.13.7.8.1.1 | Columna3sysPwStatus | read-write | mandatory | User Status. `invalid' is used to indicate this user is no longer allowed to access this device, and the table entry may subsequently be re-used. Note that the… |
| 1.3.6.1.4.1.43.2.13.7.8.1.2 | Columna3sysUserName | read-only | mandatory | An ASCII string for the User Name. Empty strings are not allowed. The index column for the User Table. There are two default users defined, 'root' and 'user'. |
| 1.3.6.1.4.1.43.2.13.7.8.1.3 | Columna3sysUserLevel | read-write | mandatory | User Access Level defining the scope of management allowed for this user. Note that the access level of default Users cannot be changed. |
| 1.3.6.1.4.1.43.2.13.7.8.1.4 | Columna3sysOldPassword | read-only | mandatory | The current password. |
| 1.3.6.1.4.1.43.2.13.7.8.1.5 | Columna3sysNewPassword | read-write | mandatory | The new password. |
| 1.3.6.1.4.1.43.2.13.7.9 | Scalara3sysSnmpPasswordCtl | read-write | mandatory | This object indicates whether this system's passwords can be changed via snmp. |
| 1.3.6.1.4.1.43.2.13.8 | Nodea3ComSysMisc | |||
| 1.3.6.1.4.1.43.2.13.8.1 | Scalara3sysNetMapTime | read-write | mandatory | The number of seconds between broadcasts of the system's address on the attached network. This only applies to 3Com's NETMap protocol. If this object is set to… |
| 1.3.6.1.4.1.43.2.13.8.2 | Scalara3sysUIBinary | read-write | mandatory | If on, the system is allowed to negotiate for binary transmission when a Telnet connection is made. |
| 1.3.6.1.4.1.43.2.13.8.3 | Scalara3sysChangeTimestamp | read-only | mandatory | This object contains the value of sysUpTime when the most recent change was made to this system, either via the Console, TELNET, or through SNMP. |
| 1.3.6.1.4.1.43.2.13.8.4 | Scalara3sysCpuUtil | read-only | mandatory | This object provides a measure of the current utilization of the CPU on this system. |
| 1.3.6.1.4.1.43.2.13.8.5 | Scalara3sysCpuBrdMacAddr | read-only | mandatory | The system's MAC address. For those devices whose CPU boards contain a MAC address, this object provides the value of that address (NB2's). For those devices w… |
| 1.3.6.1.4.1.43.2.13.8.6 | Scalara3sysExpMacAddr | read-only | mandatory | This identifies the MAC address to which the @m symbol is expanded when doing file copies. |
| 1.3.6.1.4.1.43.2.13.8.7 | Scalara3sysVportTimestamp | read-only | mandatory | This specifies the value of sysUpTime when the last virtual port was added or deleted. This object should be used to determine if and when the set of virtual p… |
| 1.3.6.1.4.1.43.2.13.8.8 | Scalara3sysDefDrive | read-only | mandatory | This object identifies the current default drive for this system. |
| 1.3.6.1.4.1.43.2.13.8.9 | Scalara3sysDefDriveType | read-only | mandatory | This object identifies the current default drive type for this system. |
| 1.3.6.1.4.1.43.2.13.8.10 | Scalara3sysDriveStatus | read-only | mandatory | This object identifies which disk drives are supported by this system. noDrives(1) means no disk drives are supported. driveA means only drive A is supported. … |
| 1.3.6.1.4.1.43.2.13.8.11 | Scalara3sysBogusDhcpSvr | read-only | mandatory | This object has the IP address of the last seen bogus DHCP or BOOTP server. |
| 1.3.6.1.4.1.43.2.13.8.12 | Scalara3sysNb2EepromVers | read-only | mandatory | This object returns the version number of the EEPROM on a NetBuilderII. Various features are dependent on having the correct version of EEPROM resident on the … |
| 1.3.6.1.4.1.43.2.13.8.13 | Scalara3sysX25Conns | read-only | mandatory | This object returns the number of active X25 connections currently maintained by the NetBuilder. |
| 1.3.6.1.4.1.43.2.13.9 | Nodea3ComFW | |||
| 1.3.6.1.4.1.43.2.13.9.1 | Scalara3sysFwSerBaudCons | read-write | mandatory | This object sets the baud rate for the console port, which is located on the CEC module's connector/LEDC panel. |
| 1.3.6.1.4.1.43.2.13.9.2 | Scalara3sysFwSerBaudAux | read-write | mandatory | This object sets the baud rate for the auxiliary port, which is located on the CEC module's connector/LEDC panel. |
| 1.3.6.1.4.1.43.2.13.9.3 | Scalara3sysFwSelfTest | read-write | mandatory | This parameter determines how the system handles self tests when the system is powered on or reset. The system can be configured to skip its self tests, run se… |
| 1.3.6.1.4.1.43.2.13.10 | Nodea3ComBoot | |||
| 1.3.6.1.4.1.43.2.13.10.1 | Scalara3sysReBoot | read-write | mandatory | This object can be used to reboot the system. If this object is set to stdReboot(2), the system's action is determined by the value of a3sysStartUpAction. If t… |
| 1.3.6.1.4.1.43.2.13.10.2 | Scalara3sysTestBootTime | read-write | mandatory | The Test Boot Time indicates the number of seconds after a test reboot the system will automatically reboot. Upon reboot, the system will start up a timer init… |
| 1.3.6.1.4.1.43.2.13.10.3 | Scalara3sysStartUpAction | read-write | mandatory | This parameter determines the boot source when the system is powered on or reset. If monitor (1) is chosen, the system enters monitor mode immediately. If user… |
| 1.3.6.1.4.1.43.2.13.10.4 | Scalara3sysTestRecoveryTimer | read-write | mandatory | This object contains the real time value of the Test Recovery Timer. When the system is performing a 'test boot' (ie, a boot when a3sysBootSources equals testW… |
| 1.3.6.1.4.1.43.2.13.10.5 | Scalara3sysDirectedReBoots | read-only | mandatory | This is a counter that tracks the number of times the system has completed successfully a boot, no matter how the boot was initiated (power-on, front-panel-but… |
| 1.3.6.1.4.1.43.2.13.10.6 | Scalara3sysExceptionReBoots | read-only | mandatory | This is a counter that tracks the number of times the system has crashed and a reboot sequence is begun by the exception handler. Note, some type of crashes ar… |
| 1.3.6.1.4.1.43.2.13.10.7 | Scalara3sysBootDump | read-write | mandatory | This determines whether or not a memory dump is performed if the system fails due to a software problem. If noDump (1) is selected, the system will not attempt… |
| 1.3.6.1.4.1.43.2.13.10.8 | Scalara3sysBootSources | read-write | mandatory | This parameter is used to specify how the entries in this table are used. If this object is set to primary(1), the system will use only the primary boot source… |
| 1.3.6.1.4.1.43.2.13.10.9 | Tablea3sysUserBootListTable | not-accessible | mandatory | This table defines a list of boot sources (and for the NetBuilder Remote Office There are two other parameters that dictate how the contents of this table are … |
| 1.3.6.1.4.1.43.2.13.10.9.1 | Rowa3sysUserBootListEntry | not-accessible | mandatory | Each entry in this table contains a single boot source. |
| 1.3.6.1.4.1.43.2.13.10.9.1.1 | Columna3sysUblSource | read-only | mandatory | This identifies the entry number in this table. Currently, the table is limited to two entries. The first entry is labelled primary(1), the next has the label … |
| 1.3.6.1.4.1.43.2.13.10.9.1.2 | Columna3sysUblDevice | read-write | mandatory | This object identifies the source from which the system attempts to boot. If this object is set to localMediaA(1), the system will attempt to boot from drive A… |
| 1.3.6.1.4.1.43.2.13.10.9.1.3 | Columna3sysUblFileName | read-write | mandatory | This specifies the path and name of the boot file. For example, to specify the file boot.29k in the root directory, this object should have the value 'boot.29k' |
| 1.3.6.1.4.1.43.2.13.10.9.1.4 | Columna3sysUblNetFile | read-write | deprecated | This object has been deprecated. (use a3sysUblFileName regardless of whether it's local or remote). |
| 1.3.6.1.4.1.43.2.13.10.9.1.5 | Columna3sysUblSlot | read-write | mandatory | This specifies the physical slot where the IO module from which the system will be booting is installed. This only applies when a3sysUblDevice is set to networ… |
| 1.3.6.1.4.1.43.2.13.10.9.1.6 | Columna3sysUblInterface | read-write | mandatory | This specifies the physical port on the IO module (installed in the slot identified by a3sysUblSlot) that the system will be booting from. This only applies wh… |
| 1.3.6.1.4.1.43.2.13.10.9.1.7 | Columna3sysUblMaxRetries | read-write | mandatory | This object determines the number of times the system will try to boot from the source identified by this table entry before going to the next entry. |
| 1.3.6.1.4.1.43.2.13.10.9.1.8 | Columna3sysUblConfigFileDevice | read-write | mandatory | This specifies the device used to access the configuration files needed by this system. If this object has the value bootDevice(1), the system will look for it… |
| 1.3.6.1.4.1.43.2.13.10.9.1.9 | Columna3sysUblConfigFilePath | read-write | mandatory | This object specifies the path to the configuration files needed by this system. |
| 1.3.6.1.4.1.43.2.13.10.9.1.10 | Columna3sysUblConfigProt | read-only | mandatory | This object specifies the protocol to use to get the configuration files if they are stored across the network. Note, this applies only if the value of a3sysUb… |
| 1.3.6.1.4.1.43.2.13.10.9.1.11 | Columna3sysUblConfigUserName | read-write | mandatory | This object indicates the Username to be used by the file service protocol identified the corresponding instance of a3sysUblConfigProt. |
| 1.3.6.1.4.1.43.2.13.10.9.1.12 | Columna3sysUblConfigPassword | read-write | mandatory | This specifies the Password to be used by the file service protocol identified by the corresponding instance of a3sysUblConfigProt. Note, for reasons of securi… |
| 1.3.6.1.4.1.43.2.13.10.9.1.13 | Columna3sysUblConfigAcct | read-write | mandatory | This specifies the Account Name used by the file service protocol. Note, for reasons of security, the value of this object will be hidden. A string of 4 stars … |
| 1.3.6.1.4.1.43.2.13.10.9.1.14 | Columna3sysUblMacAddress | read-write | mandatory | The MAC address to be used for booting over the network. This can be configured to use either the MAC address assigned to the CPU module or the MAC address ass… |
| 1.3.6.1.4.1.43.2.13.10.9.1.15 | Columna3sysUblCanonicalFlag | read-write | mandatory | This controls the format of addresses within ARP packets sent by this system. |
| 1.3.6.1.4.1.43.2.13.10.9.1.16 | Columna3sysUblRemoteProt | read-write | mandatory | This object specifies which serial link protocol to use if a3sysUblSlot identifies a slot with a High Speed Serial board. If this is set to auto (4), the syste… |
| 1.3.6.1.4.1.43.2.13.10.9.1.17 | Columna3sysUblBaudRate | read-write | mandatory | This object specifies the serial line or Token Ring baud rate. For all other types of ports, this object will be ignored. |
| 1.3.6.1.4.1.43.2.13.10.9.1.18 | Columna3sysUblClockSource | read-write | mandatory | This specifies whether to use an internal or external clock source. This applies only to High Speed Serial ports. |
| 1.3.6.1.4.1.43.2.13.10.9.1.19 | Columna3sysUblConnectorType | read-write | mandatory | This object specifies the serial line connector type. |
| 1.3.6.1.4.1.43.2.13.10.9.1.20 | Columna3sysUblWanAddress | read-write | mandatory | This specifies a string to initiate a WAN connection. The specified string required is interface and protocol specific. The maximum string length is 80 bytes. … |
| 1.3.6.1.4.1.43.2.13.10.9.1.21 | Columna3sysUblClientIpAddr | read-write | mandatory | The IP Address of this system used in packets when booting over the network. |
| 1.3.6.1.4.1.43.2.13.10.9.1.22 | Columna3sysUblServerIpAddr | read-write | mandatory | The IP address of the Boot Server. |
| 1.3.6.1.4.1.43.2.13.10.9.1.23 | Columna3sysUblGwIpAddr | read-write | mandatory | The IP address of the gateway that will forward packets to the Boot Server. |
| 1.3.6.1.4.1.43.2.13.10.9.1.24 | Columna3sysUblConfigFileIpAddr | read-write | mandatory | The IP address of the configuration files Server, if needed. |
| 1.3.6.1.4.1.43.2.13.10.9.1.25 | Columna3sysUblIpMask | read-write | mandatory | The mask to be applied to the addresses specified above. |
| 1.3.6.1.4.1.43.2.13.10.9.1.26 | Columna3sysUblAddressDiscovery | read-write | mandatory | This specifies the address discovery protocol to use for booting from the network. If configAddr(3) is specified, then the configured addresses are used. If no… |
| 1.3.6.1.4.1.43.2.13.10.9.1.27 | Columna3sysUblPassword | read-write | mandatory | This is needed when booting over a port that uses a protocol that requires a password, e.g, PPP. |
| 1.3.6.1.4.1.43.2.13.10.10 | Tablea3sysIioBootTable | not-accessible | mandatory | This table specifies where each IIO card obtains its boot image. |
| 1.3.6.1.4.1.43.2.13.10.10.1 | Rowa3sysIioBootEntry | not-accessible | mandatory | Each entry in this table corresponds to a specific slot in the NetBuilder chassis. If an IIO board is in that slot, that entry determines where that IIO board … |
| 1.3.6.1.4.1.43.2.13.10.10.1.1 | Columna3sysIioBootSlot | read-only | mandatory | This object specifies the slot into which the IIO board corresponding to this entry is placed. |
| 1.3.6.1.4.1.43.2.13.10.10.1.2 | Columna3sysIioBootFileName | read-write | mandatory | This object specifies the path and name of the IIO board's boot image. If the value of this object specifies a drive, the path is assumed to start from root. I… |
| 1.3.6.1.4.1.43.2.13.10.10.1.3 | Columna3sysIioBootState | read-only | mandatory | This object provides the current state of the IIO card installed in this slot. If there is no IIO card in the slot, this object will have the value empty(1). I… |
| 1.3.6.1.4.1.43.2.13.10.10.1.4 | Columna3sysIioBootTime | read-only | mandatory | The value of sysUpTime when the IIO board last went into the UP state. |
| 1.3.6.1.4.1.43.2.13.10.10.1.5 | Columna3sysIioBootImage | read-only | mandatory | The OID assigned to this version of Iio Software. |
| 1.3.6.1.4.1.43.2.13.11 | Nodea3ComLastBoot | |||
| 1.3.6.1.4.1.43.2.13.11.1 | Scalara3sysLastBootSource | read-only | mandatory | This object identifies the source from which the system last booted. The specifics of the boot source can be found from the corresponding User Boot List entry. |
| 1.3.6.1.4.1.43.2.13.11.2 | Scalara3sysLastBootError | read-only | mandatory | This object identifies the reason for the most recent boot failure. |
| 1.3.6.1.4.1.43.2.13.11.3 | Scalara3sysLastBootDate | read-only | mandatory | The date and time as reflected by the system clock at the time the system last rebooted. The date has the format yy/mm/dd hh:mm[:ss]. |
| 1.3.6.1.4.1.43.2.13.11.4 | Scalara3sysLbConfigFileIpAddr | read-only | mandatory | The IP address of the configuration file server used during the most recent boot. Note, even if the configuration files were obtained locally, an address may h… |
| 1.3.6.1.4.1.43.2.13.11.5 | Scalara3sysLbGwIpAddr | read-only | mandatory | The IP address of the gateway that was used to forward packets to the boot server or configuration file server during the last boot. |
| 1.3.6.1.4.1.43.2.13.11.6 | Scalara3sysLbIpMask | read-only | mandatory | The IP subnet mask configured during the last boot. |
| 1.3.6.1.4.1.43.2.13.11.7 | Scalara3sysLbConfigDevice | read-only | mandatory | The config file device used during the last boot. |
| 1.3.6.1.4.1.43.2.13.11.8 | Scalara3sysLbConfigFilePath | read-only | mandatory | The config file path used during the last boot. |
| 1.3.6.1.4.1.43.2.13.11.9 | Scalara3sysLbConfigUserName | read-only | mandatory | If the config files were obtained from a file server during the last boot, this object contains the user name used during the ftp transfer of those files. |
| 1.3.6.1.4.1.43.2.13.12 | Nodea3ComFileMgmt | |||
| 1.3.6.1.4.1.43.2.13.12.1 | Scalara3sysFmOperation | read-write | mandatory | This object is used to initiate a file management operation. When set to copy(2), the system will get the file from the Source device (identified by a3sysFmSou… |
| 1.3.6.1.4.1.43.2.13.12.2 | Scalara3sysFmSourceIpAddr | read-write | mandatory | This object specifies the IP address of the Source device from which files are obtained. If this is set to zero's, the local storage device is assumed. |
| 1.3.6.1.4.1.43.2.13.12.3 | Scalara3sysFmSourceFile | read-write | mandatory | This specifies the path and name of a source file. For example, if the action specified by a3sysFmOperation is copy(2) or rename(5), this identifies the path a… |
| 1.3.6.1.4.1.43.2.13.12.4 | Scalara3sysFmTargetIpAddr | read-write | mandatory | This object specifies the IP address of the target device to which files are copied, renamed, etc. |
| 1.3.6.1.4.1.43.2.13.12.5 | Scalara3sysFmTargetFile | read-write | mandatory | This specifies the path and name of the target file on the target system. (The filename may contain the string '@M' which will be expanded to the system MAC ad… |
| 1.3.6.1.4.1.43.2.13.12.6 | Scalara3sysFmStatus | read-only | mandatory | This identifies the current status of the file management operation. This applies to the following operations: copy(2), and directory(6). If there is an operat… |
| 1.3.6.1.4.1.43.2.13.12.7 | Scalara3sysFmTimeStamp | read-only | mandatory | This specifies the value of sysUpTime when the most recent file management operation was initiated. |
| 1.3.6.1.4.1.43.2.13.12.8 | Scalara3sysFmError | read-only | mandatory | This object identifies the results of the most recent attempt at a file operation. If no file operations have been attempted since the system was initialized, … |
| 1.3.6.1.4.1.43.2.13.12.9 | Nodea3ComFileList | |||
| 1.3.6.1.4.1.43.2.13.12.9.1 | Scalara3sysDfTime | read-only | mandatory | This object specifies the value of sysUpTime when the list of files on the system disk was last updated. This list is updated by setting a3sysFmOperation to di… |
| 1.3.6.1.4.1.43.2.13.12.9.2 | Scalara3sysDfPath | read-only | mandatory | This object identifies the directory path under which the files listed in a3sysDfTable were obtained. Where necessary, this object also identifies the disk dri… |
| 1.3.6.1.4.1.43.2.13.12.9.3 | Tablea3sysDfTable | not-accessible | mandatory | This table contains a listing of all the files in a specific directory on one of the systems disks. The directory and disk are identified by a3sysDfPath. Each … |
| 1.3.6.1.4.1.43.2.13.12.9.3.1 | Rowa3sysDfEntry | not-accessible | mandatory | Each entry in this table describes a single disk file. |
| 1.3.6.1.4.1.43.2.13.12.9.3.1.1 | Columna3sysDfName | read-only | mandatory | This contains the name of a single file on the disk. |
| 1.3.6.1.4.1.43.2.13.12.9.3.1.2 | Columna3sysDfDir | read-only | mandatory | This specifies whether the file identified by the corresponding instance of a3sysDfName is a regular file or a directory. |
| 1.3.6.1.4.1.43.2.13.12.9.4 | Scalara3ComDfTotalSpace | read-only | mandatory | The total size (in bytes) of the drive identified by a3sysDfPath |
| 1.3.6.1.4.1.43.2.13.12.9.5 | Scalara3ComDfAvailableSpace | read-only | mandatory | The available space (in bytes) of the drive identified by a3sysDfPath. |
| 1.3.6.1.4.1.43.2.13.12.10 | Nodea3ComFmCksum | |||
| 1.3.6.1.4.1.43.2.13.12.10.1 | Scalara3sysFmCksum | read-only | mandatory | This object specifies the results of a ccitt crc16 cyclic redundancy check performed on the file specified by a3sysTargetFile. The value of a3sysTargetFile at … |
| 1.3.6.1.4.1.43.2.13.12.10.2 | Scalara3sysFmCksumFile | read-only | mandatory | This object specifies the file upon which the last ccitt crc16 cyclic redundancy check was performed. The results of this operation are specified by a3sysFmCks… |
| 1.3.6.1.4.1.43.2.13.12.10.3 | Scalara3sysFmCksumTime | read-only | mandatory | This object specifies the value of sysUpTime when the last ccitt crc16 cyclic redundancy check was performed. The results of this operation are specified by a3… |
| 1.3.6.1.4.1.43.2.13.12.11 | Nodea3ComFileInfo | |||
| 1.3.6.1.4.1.43.2.13.12.11.1 | Scalara3sysFiName | read-only | mandatory | This object specifies the name of the file to which the rest of this group refers. |
| 1.3.6.1.4.1.43.2.13.12.11.2 | Scalara3sysFiDate | read-only | mandatory | This object specifies the date when the file (specified by a3sysFiName was last updated. The format of the date is yy/mm/dd hh:min:sec. |
| 1.3.6.1.4.1.43.2.13.12.11.3 | Scalara3sysFiTimeStamp | read-only | mandatory | This object specifies the value of sysUpTime when this group of objects was last updated. To update this group, set a3sysFmTargetFile to the desired file, and … |
| 1.3.6.1.4.1.43.2.13.12.11.4 | Scalara3sysFmSize | read-only | mandatory | This object specifies the size of the file (specified by a3sysFiName) in bytes. |
| 1.3.6.1.4.1.43.2.13.13 | Nodea3ComRecovery | |||
| 1.3.6.1.4.1.43.2.13.13.1 | Tablea3sysIioRecoveryTable | not-accessible | mandatory | This table specifies the recovery procedure for each Intelligent IO board in the system. This also specifies the recovery procedure for the CEC card. Note, the… |
| 1.3.6.1.4.1.43.2.13.13.1.1 | Rowa3sysIioRecoveryEntry | not-accessible | mandatory | Each entry in this table corresponds to a specific slot in the NetBuilder chassis. If an IIO board is in that slot, that entry determines the action taken by t… |
| 1.3.6.1.4.1.43.2.13.13.1.1.1 | Columna3sysIioRecoverySlot | read-only | mandatory | This object specifies the slot into which the IIO (or CEC) board corresponding to this entry is placed. |
| 1.3.6.1.4.1.43.2.13.13.1.1.2 | Columna3sysIioRecoveryProcedure | read-write | mandatory | The value of this object determines the action taken if the IIO (or CEC) crashes. If the value of this object is selectiveDumpAndReboot (5), the value of a3sys… |
| 1.3.6.1.4.1.43.2.13.13.1.1.3 | Columna3sysIioRecoverySelect | read-write | mandatory | This object specifies the IIO or CEC boards that will dump and reboot in the event this IIO or CEC board crashes. This object is relevant only if the value of … |
| 1.3.6.1.4.1.43.100 | Nodea3BogusDhcpSvr | A a3BogusDhcpSvr trap signifies that an unauthorized DHCP or BOOTP server has been detected on the network. |