MIB Viewer

ADSL-DMT-LINE-MIB

53 objects
No module-level DESCRIPTION found.
Imported Objects
ADSL-LINE-MIBadslLCSMib adslLineConfProfileName
IF-MIBifIndex
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMIMODULE-IDENTITY OBJECT-TYPE
OIDNameAccessStatusDescription
1.3.6.1.2.1.10.94.1.1.16.2IdentityadslLineDmtMIB
1.3.6.1.2.1.10.94.1.1.16.2.1NodeadslLineDmtMIBObjects
1.3.6.1.2.1.10.94.1.1.16.2.1.1TableadslLineDmtTablenot-accessiblecurrentThis table extends the adslLineTable and contains common attributes describing both ends of ADSL lines supported by the system.
1.3.6.1.2.1.10.94.1.1.16.2.1.1.1RowadslLineDmtEntrynot-accessiblecurrentA set of common attributes describing both ends of an ADSL line supported by the system. There exist an entry for each ifEntry with an ifType of adsl(94).
1.3.6.1.2.1.10.94.1.1.16.2.1.1.1.1ColumnadslLineDmtTrellisread-onlycurrentReports whether the Trellis coding is used on the DMT line. Use of trellis coding is determined at line initialization with C-MSGS1 and R-MSGS1 exchanges and w…
1.3.6.1.2.1.10.94.1.1.16.2.1.1.1.2ColumnadslLineDmtEOCread-onlycurrentReports whether the eoc can support autonomous data streaming mode or only transaction mode. After initialization, unknown is reported until sufficient autonom…
1.3.6.1.2.1.10.94.1.1.16.2.1.2TableadslAtucDmtPhysTablenot-accessiblecurrentThis table extends the adslAtucPhysTable and contains specific physical layer parameters for the ATU-C class devices supported by the system.
1.3.6.1.2.1.10.94.1.1.16.2.1.2.1RowadslAtucDmtPhysEntrynot-accessiblecurrentA set of physical-layer parameters for an ATU-C class device supported by the system. There exists an entry for each ifEntry with an ifType of adsl(94).
1.3.6.1.2.1.10.94.1.1.16.2.1.2.1.1ColumnadslAtucDmtIssueread-onlycurrentReports the issue number of the relevant standard that the DMT ADSL transceiver at the ATU-C is currently operating to. The issue number will be fixed by the h…
1.3.6.1.2.1.10.94.1.1.16.2.1.2.1.2ColumnadslAtucDmtStateread-onlycurrentReports current state of the ATU-C DMT transceiver. The current state can change dynamically. The SNMP agent reports the state after querying the ATU-C state m…
1.3.6.1.2.1.10.94.1.1.16.2.1.2.1.3ColumnadslAtucDmtInterleavePathread-onlycurrentReports bearer channel of downstream interleaved path.
1.3.6.1.2.1.10.94.1.1.16.2.1.2.1.4ColumnadslAtucDmtFastPathread-onlycurrentReports bearer channel of downstream fast path.
1.3.6.1.2.1.10.94.1.1.16.2.1.3TableadslAturDmtPhysTablenot-accessiblecurrentThis table extends the adslAturPhysTable and contains physical layer parameters for the ATU-R class devices supported by the system.
1.3.6.1.2.1.10.94.1.1.16.2.1.3.1RowadslAturDmtPhysEntrynot-accessiblecurrentA set of physical-layer parameters for an ATU-R class device supported by the system. There exists an entry for each ifEntry with an ifType of adsl(94).
1.3.6.1.2.1.10.94.1.1.16.2.1.3.1.1ColumnadslAturDmtIssueread-onlycurrentReports the issue number of the relevant standard that the DMT ADSL transceiver at the ATU-R is currently operating to. The issue number will be fixed by the h…
1.3.6.1.2.1.10.94.1.1.16.2.1.3.1.2ColumnadslAturDmtStateread-onlycurrentReports current state of the ATU-R DMT transceiver. The current state can change dynamically. ATU-R state is reported by the SNMP agent at the ATU-C which infe…
1.3.6.1.2.1.10.94.1.1.16.2.1.3.1.3ColumnadslAturDmtInterleavePathread-onlycurrentReports bearer channel of upstream interleaved path.
1.3.6.1.2.1.10.94.1.1.16.2.1.3.1.4ColumnadslAturDmtFastPathread-onlycurrentReports bearer channel of upstream fast path.
1.3.6.1.2.1.10.94.1.1.16.2.1.4NodeadslAtucDmtChanTable
1.3.6.1.2.1.10.94.1.1.16.2.1.5NodeadslAturDmtChanTable
1.3.6.1.2.1.10.94.1.1.16.2.1.6NodeadslAtucDmtPerfDataTable
1.3.6.1.2.1.10.94.1.1.16.2.1.7NodeadslAturDmtPerfDataTable
1.3.6.1.2.1.10.94.1.1.16.2.1.8NodeadslAtucDmtIntervalTable
1.3.6.1.2.1.10.94.1.1.16.2.1.9NodeadslAturDmtIntervalTable
1.3.6.1.2.1.10.94.1.1.16.2.1.10NodeadslAtucDmtChanPerfDataTable
1.3.6.1.2.1.10.94.1.1.16.2.1.11NodeadslAturDmtChanPerfDataTable
1.3.6.1.2.1.10.94.1.1.16.2.1.12NodeadslAtucDmtChanIntervalTable
1.3.6.1.2.1.10.94.1.1.16.2.1.13NodeadslAturDmtChanIntervalTable
1.3.6.1.2.1.10.94.1.1.16.2.1.14NodeadslLineDmtConfProfileIndexNext
1.3.6.1.2.1.10.94.1.1.16.2.1.15TableadslLineDmtConfProfileTablenot-accessiblecurrentThis table extends the adslLineConfProfileTable and contains ADSL DMT line configuration information.
1.3.6.1.2.1.10.94.1.1.16.2.1.15.1RowadslLineDmtConfProfileEntrynot-accessiblecurrentA configuration profile containing ADSL DMT line configuration information.
1.3.6.1.2.1.10.94.1.1.16.2.1.15.1.1ColumnadslAtucDmtConfFreqBinsread-createcurrentA string of 32 bits to enable/disable the incoming DMT frequency bins that the ATU-C receiver monitors. Each bit controls one bin with the first bit of the fir…
1.3.6.1.2.1.10.94.1.1.16.2.1.15.1.2ColumnadslAturDmtConfFreqBinsread-createcurrentA string of 256 bits to enable/disable the incoming DMT frequency bins that the ATU-R receiver should monitor after the next activation. The mechanism to pass …
1.3.6.1.2.1.10.94.1.1.16.2.1.15.1.3ColumnadslLineDmtConfModeread-createcurrentDefines the operational mode of the DMT ADSL transceiver. Configured in the C-MSG1 and C-MSG-RA exchanges.
1.3.6.1.2.1.10.94.1.1.16.2.1.15.1.4ColumnadslLineDmtConfTrellisread-createcurrentEnables the Trellis coder of the DMT transceiver. Configured in the C-MSG1 and C-MSG-RA exchanges.
1.3.6.1.2.1.10.94.1.1.16.2.1.15.1.5ColumnadslLineDmtConfEOCread-createcurrentDefines the embedded operations channel mode for the DMT ADSL line.
1.3.6.1.2.1.10.94.1.1.16.2.1.15.1.6ColumnadslAtucDmtConfInterleavePathread-createcurrentTarget channel for downstream interleave data path.
1.3.6.1.2.1.10.94.1.1.16.2.1.15.1.7ColumnadslAtucDmtConfFastPathread-createcurrentTarget channel for downstream fast data path.
1.3.6.1.2.1.10.94.1.1.16.2.1.15.1.8ColumnadslAturDmtConfInterleavePathread-createcurrentTarget channel for upstream interleave data path.
1.3.6.1.2.1.10.94.1.1.16.2.1.15.1.9ColumnadslAturDmtConfFastPathread-createcurrentTarget channel for upstream fast data path.
1.3.6.1.2.1.10.94.1.1.16.2.1.16NodeadslLineDmtAlarmConfProfileIndexNext
1.3.6.1.2.1.10.94.1.1.16.2.1.17NodeadslLineDmtAlarmConfProfileTable
1.3.6.1.2.1.10.94.1.1.16.2.2NodeadslDmtLineMIBNotificationsPrefix
1.3.6.1.2.1.10.94.1.1.16.2.2.0NodeadslDmtLineMIBNotifications
1.3.6.1.2.1.10.94.1.1.16.2.3NodeadslLineDmtMIBConformance
1.3.6.1.2.1.10.94.1.1.16.2.3.1NodeadslLineDmtMIBCompliances
1.3.6.1.2.1.10.94.1.1.16.2.3.1.1ComplianceadslDMTLineMibCompliancecurrentThe compliance statement for SNMP entities which have ADSL DMT interfaces.
1.3.6.1.2.1.10.94.1.1.16.2.3.1.2ComplianceadslLineDmtMIBAturCompliancecurrentThe compliance statement for SNMP entities which manage ADSL DMT ATU-R interfaces.
1.3.6.1.2.1.10.94.1.1.16.2.3.2NodeadslLineDmtMIBGroups
1.3.6.1.2.1.10.94.1.1.16.2.3.2.1GroupadslLineDmtGroupcurrentA collection of managed objects defining the attributes of an ADSL line supportings modems using the DMT line code.
1.3.6.1.2.1.10.94.1.1.16.2.3.2.2GroupadslAtucDmtPhysGroupcurrentA collection of managed objects defining the physical-layer parameters of an ATU-C using the DMT line code.
1.3.6.1.2.1.10.94.1.1.16.2.3.2.3GroupadslAturDmtPhysGroupcurrentA collection of managed objects defining the physical-layer parameters of an ATU-R using the DMT line code.
1.3.6.1.2.1.10.94.1.1.16.2.3.2.4GroupadslLineDmtConfProfileGroupcurrentA collection of managed objects defining the line configuration information associated with one or more ADSL ATU class devices implementing the DMT line code.