MIB Viewer

ADSL-LINE-EXT-MIB

78 objects
Copyright (C) The Internet Society (2002). This version of this MIB module is part of RFC 3440; see the RFC itself for full legal notices. This MIB Module is a supplement to the ADSL-LINE-MIB [RFC2662].
Imported Objects
ADSL-LINE-MIBadslAtucIntervalEntry adslAtucPerfDataEntry adslAturIntervalEntry adslAturPerfDataEntry adslLineAlarmConfProfileEntry adslLineConfProfileEntry adslLineEntry adslMIB
ADSL-TC-MIBAdslPerfCurrDayCount AdslPerfPrevDayCount
PerfHist-TC-MIBPerfCurrentCount PerfIntervalCount
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMICounter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
SNMPv2-TCTEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.2.1.10.94.3IdentityadslExtMIBCopyright (C) The Internet Society (2002). This version of this MIB module is part of RFC 3440; see the RFC itself for full legal notices. This MIB Module is a…
1.3.6.1.2.1.10.94.3.1NodeadslExtMibObjects
1.3.6.1.2.1.10.94.3.1.17TableadslLineExtTablenot-accessiblecurrentThis table is an extension of RFC 2662. It contains ADSL line configuration and monitoring information. This includes the ADSL line's capabilities and actual A…
1.3.6.1.2.1.10.94.3.1.17.1RowadslLineExtEntrynot-accessiblecurrentAn entry extends the adslLineEntry defined in [RFC2662]. Each entry corresponds to an ADSL line.
1.3.6.1.2.1.10.94.3.1.17.1.1ColumnadslLineTransAtucCapread-onlycurrentThe transmission modes, represented by a bitmask that the ATU-C is capable of supporting. The modes available are limited by the design of the equipment.
1.3.6.1.2.1.10.94.3.1.17.1.2ColumnadslLineTransAtucConfigread-writecurrentThe transmission modes, represented by a bitmask, currently enabled by the ATU-C. The manager can only set those modes that are supported by the ATU-C. An ATU-…
1.3.6.1.2.1.10.94.3.1.17.1.3ColumnadslLineTransAtucActualread-onlycurrentThe actual transmission mode of the ATU-C. During ADSL line initialization, the ADSL Transceiver Unit - Remote terminal end (ATU-R) will determine the mode use…
1.3.6.1.2.1.10.94.3.1.17.1.4ColumnadslLineGlitePowerStateread-onlycurrentThe value of this object specifies the power state of this interface. L0 is power on, L1 is power on but reduced and L3 is power off. Power state cannot be con…
1.3.6.1.2.1.10.94.3.1.17.1.5ColumnadslLineConfProfileDualLiteread-writecurrentThis object extends the definition an ADSL line and associated channels (when applicable) for cases when it is configured in dual mode, and operating in a G.Li…
1.3.6.1.2.1.10.94.3.1.18TableadslAtucPerfDataExtTablenot-accessiblecurrentThis table extends adslAtucPerfDataTable [RFC2662] with additional ADSL physical line counter information such as unavailable seconds-line and severely errored…
1.3.6.1.2.1.10.94.3.1.18.1RowadslAtucPerfDataExtEntrynot-accessiblecurrentAn entry extends the adslAtucPerfDataEntry defined in [RFC2662]. Each entry corresponds to an ADSL line.
1.3.6.1.2.1.10.94.3.1.18.1.1ColumnadslAtucPerfStatFastRread-onlycurrentThe value of this object reports the count of the number of fast line bs since last agent reset.
1.3.6.1.2.1.10.94.3.1.18.1.2ColumnadslAtucPerfStatFailedFastRread-onlycurrentThe value of this object reports the count of the number of failed fast line retrains since last agent reset.
1.3.6.1.2.1.10.94.3.1.18.1.3ColumnadslAtucPerfStatSesLread-onlycurrentThe value of this object reports the count of the number of severely errored seconds-line since last agent reset.
1.3.6.1.2.1.10.94.3.1.18.1.4ColumnadslAtucPerfStatUasLread-onlycurrentThe value of this object reports the count of the number of unavailable seconds-line since last agent reset.
1.3.6.1.2.1.10.94.3.1.18.1.5ColumnadslAtucPerfCurr15MinFastRread-onlycurrentFor the current 15-minute interval, adslAtucPerfCurr15MinFastR reports the current number of seconds during which there have been fast retrains.
1.3.6.1.2.1.10.94.3.1.18.1.6ColumnadslAtucPerfCurr15MinFailedFastRread-onlycurrentFor the current 15-minute interval, adslAtucPerfCurr15MinFailedFastR reports the current number of seconds during which there have been failed fast retrains.
1.3.6.1.2.1.10.94.3.1.18.1.7ColumnadslAtucPerfCurr15MinSesLread-onlycurrentFor the current 15-minute interval, adslAtucPerfCurr15MinSesL reports the current number of seconds during which there have been severely errored seconds-line.
1.3.6.1.2.1.10.94.3.1.18.1.8ColumnadslAtucPerfCurr15MinUasLread-onlycurrentFor the current 15-minute interval, adslAtucPerfCurr15MinUasL reports the current number of seconds during which there have been unavailable seconds-line.
1.3.6.1.2.1.10.94.3.1.18.1.9ColumnadslAtucPerfCurr1DayFastRread-onlycurrentFor the current day as measured by adslAtucPerfCurr1DayTimeElapsed [RFC2662], adslAtucPerfCurr1DayFastR reports the number of seconds during which there have b…
1.3.6.1.2.1.10.94.3.1.18.1.10ColumnadslAtucPerfCurr1DayFailedFastRread-onlycurrentFor the current day as measured by adslAtucPerfCurr1DayTimeElapsed [RFC2662], adslAtucPerfCurr1DayFailedFastR reports the number of seconds during which there …
1.3.6.1.2.1.10.94.3.1.18.1.11ColumnadslAtucPerfCurr1DaySesLread-onlycurrentFor the current day as measured by adslAtucPerfCurr1DayTimeElapsed [RFC2662], adslAtucPerfCurr1DaySesL reports the number of seconds during which there have be…
1.3.6.1.2.1.10.94.3.1.18.1.12ColumnadslAtucPerfCurr1DayUasLread-onlycurrentFor the current day as measured by adslAtucPerfCurr1DayTimeElapsed [RFC2662], adslAtucPerfCurr1DayUasL reports the number of seconds during which there have be…
1.3.6.1.2.1.10.94.3.1.18.1.13ColumnadslAtucPerfPrev1DayFastRread-onlycurrentFor the previous day, adslAtucPerfPrev1DayFastR reports the number of seconds during which there were fast retrains.
1.3.6.1.2.1.10.94.3.1.18.1.14ColumnadslAtucPerfPrev1DayFailedFastRread-onlycurrentFor the previous day, adslAtucPerfPrev1DayFailedFastR reports the number of seconds during which there were failed fast retrains.
1.3.6.1.2.1.10.94.3.1.18.1.15ColumnadslAtucPerfPrev1DaySesLread-onlycurrentFor the previous day, adslAtucPerfPrev1DaySesL reports the number of seconds during which there were severely errored seconds-line.
1.3.6.1.2.1.10.94.3.1.18.1.16ColumnadslAtucPerfPrev1DayUasLread-onlycurrentFor the previous day, adslAtucPerfPrev1DayUasL reports the number of seconds during which there were unavailable seconds-line.
1.3.6.1.2.1.10.94.3.1.19TableadslAtucIntervalExtTablenot-accessiblecurrentThis table provides one row for each ATU-C performance data collection interval for ADSL physical interfaces whose IfEntries' ifType is equal to adsl(94).
1.3.6.1.2.1.10.94.3.1.19.1RowadslAtucIntervalExtEntrynot-accessiblecurrentAn entry in the adslAtucIntervalExtTable.
1.3.6.1.2.1.10.94.3.1.19.1.1ColumnadslAtucIntervalFastRread-onlycurrentFor the current interval, adslAtucIntervalFastR reports the current number of seconds during which there have been fast retrains.
1.3.6.1.2.1.10.94.3.1.19.1.2ColumnadslAtucIntervalFailedFastRread-onlycurrentFor the each interval, adslAtucIntervalFailedFastR reports the number of seconds during which there have been failed fast retrains.
1.3.6.1.2.1.10.94.3.1.19.1.3ColumnadslAtucIntervalSesLread-onlycurrentFor the each interval, adslAtucIntervalSesL reports the number of seconds during which there have been severely errored seconds-line.
1.3.6.1.2.1.10.94.3.1.19.1.4ColumnadslAtucIntervalUasLread-onlycurrentFor the each interval, adslAtucIntervalUasL reports the number of seconds during which there have been unavailable seconds-line.
1.3.6.1.2.1.10.94.3.1.20TableadslAturPerfDataExtTablenot-accessiblecurrentThis table contains ADSL physical line counters not defined in the adslAturPerfDataTable from the ADSL-LINE-MIB [RFC2662].
1.3.6.1.2.1.10.94.3.1.20.1RowadslAturPerfDataExtEntrynot-accessiblecurrentAn entry extends the adslAturPerfDataEntry defined in [RFC2662]. Each entry corresponds to an ADSL line.
1.3.6.1.2.1.10.94.3.1.20.1.1ColumnadslAturPerfStatSesLread-onlycurrentThe value of this object reports the count of severely errored second-line since the last agent reset.
1.3.6.1.2.1.10.94.3.1.20.1.2ColumnadslAturPerfStatUasLread-onlycurrentThe value of this object reports the count of unavailable seconds-line since the last agent reset.
1.3.6.1.2.1.10.94.3.1.20.1.3ColumnadslAturPerfCurr15MinSesLread-onlycurrentFor the current 15-minute interval, adslAturPerfCurr15MinSesL reports the current number of seconds during which there have been severely errored seconds-line.
1.3.6.1.2.1.10.94.3.1.20.1.4ColumnadslAturPerfCurr15MinUasLread-onlycurrentFor the current 15-minute interval, adslAturPerfCurr15MinUasL reports the current number of seconds during which there have been available seconds-line.
1.3.6.1.2.1.10.94.3.1.20.1.5ColumnadslAturPerfCurr1DaySesLread-onlycurrentFor the current day as measured by adslAturPerfCurr1DayTimeElapsed [RFC2662], adslAturPerfCurr1DaySesL reports the number of seconds during which there have be…
1.3.6.1.2.1.10.94.3.1.20.1.6ColumnadslAturPerfCurr1DayUasLread-onlycurrentFor the current day as measured by adslAturPerfCurr1DayTimeElapsed [RFC2662], adslAturPerfCurr1DayUasL reports the number of seconds during which there have be…
1.3.6.1.2.1.10.94.3.1.20.1.7ColumnadslAturPerfPrev1DaySesLread-onlycurrentFor the previous day, adslAturPerfPrev1DaySesL reports the number of seconds during which there were severely errored seconds-line.
1.3.6.1.2.1.10.94.3.1.20.1.8ColumnadslAturPerfPrev1DayUasLread-onlycurrentFor the previous day, adslAturPerfPrev1DayUasL reports the number of seconds during which there were severely errored seconds-line.
1.3.6.1.2.1.10.94.3.1.21TableadslAturIntervalExtTablenot-accessiblecurrentThis table provides one row for each ATU-R performance data collection interval for ADSL physical interfaces whose IfEntries' ifType is equal to adsl(94).
1.3.6.1.2.1.10.94.3.1.21.1RowadslAturIntervalExtEntrynot-accessiblecurrentAn entry in the adslAturIntervalExtTable.
1.3.6.1.2.1.10.94.3.1.21.1.1ColumnadslAturIntervalSesLread-onlycurrentFor the each interval, adslAturIntervalSesL reports the number of seconds during which there have been severely errored seconds-line.
1.3.6.1.2.1.10.94.3.1.21.1.2ColumnadslAturIntervalUasLread-onlycurrentFor the each interval, adslAturIntervalUasL reports the number of seconds during which there have been unavailable seconds-line.
1.3.6.1.2.1.10.94.3.1.22TableadslConfProfileExtTablenot-accessiblecurrentThe adslConfProfileExtTable extends the ADSL line profile configuration information in the adslLineConfProfileTable from the ADSL-LINE-MIB [RFC2662] by adding …
1.3.6.1.2.1.10.94.3.1.22.1RowadslConfProfileExtEntrynot-accessiblecurrentAn entry extends the adslLineConfProfileEntry defined in [RFC2662]. Each entry corresponds to an ADSL line profile.
1.3.6.1.2.1.10.94.3.1.22.1.1ColumnadslConfProfileLineTyperead-createcurrentThis object is used to configure the ADSL physical line mode. It has following valid values: noChannel(1), when no channels exist. fastOnly(2), when only fast …
1.3.6.1.2.1.10.94.3.1.23TableadslAlarmConfProfileExtTablenot-accessiblecurrentThis table extends the adslLineAlarmConfProfileTable and provides threshold parameters for all the counters defined in this MIB module.
1.3.6.1.2.1.10.94.3.1.23.1RowadslAlarmConfProfileExtEntrynot-accessiblecurrentAn entry extends the adslLineAlarmConfProfileTable defined in [RFC2662]. Each entry corresponds to an ADSL alarm profile.
1.3.6.1.2.1.10.94.3.1.23.1.1ColumnadslAtucThreshold15MinFailedFastRread-createcurrentThe first time the value of the corresponding instance of adslAtucPerfCurr15MinFailedFastR reaches or exceeds this value within a given 15-minute performance d…
1.3.6.1.2.1.10.94.3.1.23.1.2ColumnadslAtucThreshold15MinSesLread-createcurrentThe first time the value of the corresponding instance of adslAtucPerf15MinSesL reaches or exceeds this value within a given 15-minute performance data collect…
1.3.6.1.2.1.10.94.3.1.23.1.3ColumnadslAtucThreshold15MinUasLread-createcurrentThe first time the value of the corresponding instance of adslAtucPerf15MinUasL reaches or exceeds this value within a given 15-minute performance data collect…
1.3.6.1.2.1.10.94.3.1.23.1.4ColumnadslAturThreshold15MinSesLread-createcurrentThe first time the value of the corresponding instance of adslAturPerf15MinSesL reaches or exceeds this value within a given 15-minute performance data collect…
1.3.6.1.2.1.10.94.3.1.23.1.5ColumnadslAturThreshold15MinUasLread-createcurrentThe first time the value of the corresponding instance of adslAturPerf15MinUasL reaches or exceeds this value within a given 15-minute performance data collect…
1.3.6.1.2.1.10.94.3.1.24NodeadslExtTraps
1.3.6.1.2.1.10.94.3.1.24.1NodeadslExtAtucTraps
1.3.6.1.2.1.10.94.3.1.24.1.0NodeadslExtAtucTrapsPrefix
1.3.6.1.2.1.10.94.3.1.24.1.0.1NotificationadslAtucFailedFastRThreshTrapcurrentFailed Fast Retrains 15-minute threshold reached.
1.3.6.1.2.1.10.94.3.1.24.1.0.2NotificationadslAtucSesLThreshTrapcurrentSeverely errored seconds-line 15-minute threshold reached.
1.3.6.1.2.1.10.94.3.1.24.1.0.3NotificationadslAtucUasLThreshTrapcurrentUnavailable seconds-line 15-minute threshold reached.
1.3.6.1.2.1.10.94.3.1.24.2NodeadslExtAturTraps
1.3.6.1.2.1.10.94.3.1.24.2.0NodeadslExtAturTrapsPrefix
1.3.6.1.2.1.10.94.3.1.24.2.0.1NotificationadslAturSesLThreshTrapcurrentSeverely errored seconds-line 15-minute threshold reached.
1.3.6.1.2.1.10.94.3.1.24.2.0.2NotificationadslAturUasLThreshTrapcurrentUnavailable seconds-line 15-minute threshold reached.
1.3.6.1.2.1.10.94.3.2NodeadslExtConformance
1.3.6.1.2.1.10.94.3.2.1NodeadslExtGroups
1.3.6.1.2.1.10.94.3.2.1.1GroupadslExtLineGroupcurrentA collection of objects providing extended configuration information about an ADSL Line.
1.3.6.1.2.1.10.94.3.2.1.2GroupadslExtAtucPhysPerfCounterGroupcurrentA collection of objects providing raw performance counts on an ADSL Line (ATU-C end).
1.3.6.1.2.1.10.94.3.2.1.3GroupadslExtAturPhysPerfCounterGroupcurrentA collection of objects providing raw performance counts on an ADSL Line (ATU-C end).
1.3.6.1.2.1.10.94.3.2.1.4GroupadslExtLineConfProfileControlGroupcurrentA collection of objects providing profile control for the ADSL system.
1.3.6.1.2.1.10.94.3.2.1.5GroupadslExtLineAlarmConfProfileGroupcurrentA collection of objects providing alarm profile control for the ADSL system.
1.3.6.1.2.1.10.94.3.2.1.6GroupadslExtNotificationsGroupcurrentThe collection of ADSL extension notifications.
1.3.6.1.2.1.10.94.3.2.2NodeadslExtCompliances
1.3.6.1.2.1.10.94.3.2.2.1ComplianceadslExtLineMibAtucComplianceread-writecurrentThe compliance statement for SNMP entities which represent ADSL ATU-C interfaces.
Type Definitions
NameSyntaxStatusDescription
AdslTransmissionModeTypeBITS { ansit1413(0), etsi(1), q9921PotsNonOverlapped(2), q9921PotsOverlapped(3), q9921IsdnNonOverlapped(4), q9921isdnOverlapped(5), q9921tcmIsdnNonOverlapped(6), q9921tcmIsdnOverlapped(7), q9922potsNonOverlapeed(8), q9922potsOverlapped(9), q9922tcmIsdnNonOverlapped(10), q9922tcmIsdnOverlapped(11), q9921tcmIsdnSymmetric(12) }currentA set of ADSL line transmission modes, with one bit per mode. The notes (F) and (L) denote Full-Rate and G.Lite respectively: Bit 00 : Regional Std. (ANSI T1.413) (F) Bit 01 : Regional Std. (ETSI DTS/TM06006) (F) Bit 02…
MIB Viewer