ADTRAN-GEN-FRAME-RELAY-MIB
212 objects
ADTRAN Generic Frame Relay Management Module
Imported Objects
| ADTRAN-GENPORT-MIB | adGenPortTrapIdentifier |
| ADTRAN-GENSLOT-MIB | adGenSlotInfoIndex |
| ADTRAN-GENTRAPINFORM-MIB | adTrapInformSeqNum |
| ADTRAN-SHARED-CND-SYSTEM-MIB MISSING | adGenFrameRelay adGenFrameRelayID |
| ADTRAN-TAeSCUEXT1-MIB | adTAeSCUTrapAlarmLevel |
| IF-MIB | ifIndex ifOperStatus InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-MIB | sysName |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.664.5.70.29.1 | NodeadGenFrameRelayMIBObjects | |||
| 1.3.6.1.4.1.664.5.70.29.1.1 | NodeadGenFrGroup | |||
| 1.3.6.1.4.1.664.5.70.29.1.1.2 | TableadGenFrGroupTable | not-accessible | current | This table provides provisioning and status information on all frame relay groups / bearer channels. |
| 1.3.6.1.4.1.664.5.70.29.1.1.2.1 | RowadGenFrGroupEntry | not-accessible | current | The Frame Relay Group provisioning and status table entry. To create a frame relay group, the following procedures are used: (1) The management application cre… |
| 1.3.6.1.4.1.664.5.70.29.1.1.2.1.1 | ColumnadGenFrGroupRowStatus | read-create | current | The adGenFrGroupRowStatus object allows create, change, and delete operations on the Frame Relay Group / Bearer Channel. |
| 1.3.6.1.4.1.664.5.70.29.1.1.2.1.2 | ColumnadGenFrGroupStatusString | read-only | current | The reason, if any, why the why the group is not in an operational state due to provisioning or hardware limitations. |
| 1.3.6.1.4.1.664.5.70.29.1.1.2.1.3 | ColumnadGenFrGroupAdminStatus | read-create | current | The desired state of the frame relay group. This object must be set to up(1) or testing(3) to enable user data transmission on PVCs of this group and for enabl… |
| 1.3.6.1.4.1.664.5.70.29.1.1.2.1.5 | ColumnadGenFrGroupLmiType | read-create | current | The value of this object identifies the local in-channel signaling protocol that is used for this frame relay UNI/NNI logical port. |
| 1.3.6.1.4.1.664.5.70.29.1.1.2.1.6 | ColumnadGenFrGroupLmiStatus | read-only | current | The value of this object identifies status of local in-channel signaling protocol. If the signaling protocol is 'none', then this object will report 'up'. |
| 1.3.6.1.4.1.664.5.70.29.1.1.2.1.7 | ColumnadGenFrGroupLmiEnquiryIn | read-only | current | The number of Status Enquiry messages received. If the logical port is not performing network-side or bidirectional procedures then this object is not applicab… |
| 1.3.6.1.4.1.664.5.70.29.1.1.2.1.8 | ColumnadGenFrGroupLmiEnquiryOut | read-only | current | The number of Status Enquiry messages transmitted. If the logical port is not performing user-side or bidirectional procedures then this object is not applicab… |
| 1.3.6.1.4.1.664.5.70.29.1.1.2.1.9 | ColumnadGenFrGroupLmiStatusIn | read-only | current | The number of Status messages received. If the logical port is not performing user-side or bidirectional procedures then this object is not applicable. |
| 1.3.6.1.4.1.664.5.70.29.1.1.2.1.10 | ColumnadGenFrGroupLmiStatusOut | read-only | current | The number of Status messages transmitted. If the logical port is not performing network-side or bidirectional procedures then this object is not applicable. |
| 1.3.6.1.4.1.664.5.70.29.1.1.2.1.11 | ColumnadGenFrGroupLmiInvalidIn | read-only | current | The number of invalid LMI messages received by this logical port. |
| 1.3.6.1.4.1.664.5.70.29.1.1.2.1.12 | ColumnadGenFrGroupLmiStatusEnqTimeouts | read-only | current | The number of times this logical port has failed to receive a Status Enquiry message in T392 seconds. If the logical port is not performing network-side or bid… |
| 1.3.6.1.4.1.664.5.70.29.1.1.2.1.13 | ColumnadGenFrGroupLmiStatusTimeouts | read-only | current | The number of times this logical port has failed to receive a Status message in a polling interval (within T391 seconds). If the logical port is not performing… |
| 1.3.6.1.4.1.664.5.70.29.1.1.2.1.14 | ColumnadGenFrGroupClearCounters | read-create | current | Writing a value of 1 will reset the interface and signaling statistics for this logical port. |
| 1.3.6.1.4.1.664.5.70.29.1.1.2.1.15 | ColumnadGenFrGroupClearPmHistory | read-create | current | Writing a value of 1 will reset the interface performance monitoring statistics/intervals for this logical port. |
| 1.3.6.1.4.1.664.5.70.29.1.1.2.1.16 | ColumnadGenFrGroupLinkLastCreateError | read-only | current | The reason for the last error that occurred while attempting to create an entry in the Frame Relay Link Table (adGenFrLinkTable) for this specific frame relay … |
| 1.3.6.1.4.1.664.5.70.29.1.1.2.1.17 | ColumnadGenFrGroupPvcLastCreateError | read-only | current | The reason for the last error that occurred while attempting to create an entry in the Frame Relay PVC Table (adGenFrPVCTable) for this specific frame relay gr… |
| 1.3.6.1.4.1.664.5.70.29.1.1.3 | TableadGenFrGroupCurrentTable | not-accessible | current | The FR Group current table contains performance monitoring data for the current 15-minute interval. |
| 1.3.6.1.4.1.664.5.70.29.1.1.3.1 | RowadGenFrGroupCurrentEntry | not-accessible | current | An entry in the FR Group current table |
| 1.3.6.1.4.1.664.5.70.29.1.1.3.1.1 | ColumnadGenFrGroupCurrentInOctets | read-only | current | The number of octets received on the FR Group. |
| 1.3.6.1.4.1.664.5.70.29.1.1.3.1.2 | ColumnadGenFrGroupCurrentInPkts | read-only | current | The number of packets received on the FR Group. |
| 1.3.6.1.4.1.664.5.70.29.1.1.3.1.3 | ColumnadGenFrGroupCurrentInDiscards | read-only | current | The number of received packets discarded on the FR Group. |
| 1.3.6.1.4.1.664.5.70.29.1.1.3.1.4 | ColumnadGenFrGroupCurrentInErrors | read-only | current | The number of errored packets received on the FR Group. |
| 1.3.6.1.4.1.664.5.70.29.1.1.3.1.5 | ColumnadGenFrGroupCurrentOutOctets | read-only | current | The number of octets transmitted on the FR Group. |
| 1.3.6.1.4.1.664.5.70.29.1.1.3.1.6 | ColumnadGenFrGroupCurrentOutPkts | read-only | current | The number of packets transmitted on the FR Group. |
| 1.3.6.1.4.1.664.5.70.29.1.1.3.1.7 | ColumnadGenFrGroupCurrentOutDiscards | read-only | current | The number of transmit packets discarded on the FR Group. |
| 1.3.6.1.4.1.664.5.70.29.1.1.3.1.8 | ColumnadGenFrGroupCurrentOutErrors | read-only | current | The number of errored packets transmitted on the FR Group. |
| 1.3.6.1.4.1.664.5.70.29.1.1.3.1.9 | ColumnadGenFrGroupCurrentLmiEnquiryIn | read-only | current | The number of Status Enquiry messages received. If the logical port is not performing network-side or bidirectional procedures then this object is not applicab… |
| 1.3.6.1.4.1.664.5.70.29.1.1.3.1.10 | ColumnadGenFrGroupCurrentLmiEnquiryOut | read-only | current | The number of Status Enquiry messages transmitted. If the logical port is not performing user-side or bidirectional procedures then this object is not applicab… |
| 1.3.6.1.4.1.664.5.70.29.1.1.3.1.11 | ColumnadGenFrGroupCurrentLmiStatusIn | read-only | current | The number of Status messages received. If the logical port is not performing user-side or bidirectional procedures then this object is not applicable. |
| 1.3.6.1.4.1.664.5.70.29.1.1.3.1.12 | ColumnadGenFrGroupCurrentLmiStatusOut | read-only | current | The number of Status messages transmitted. If the logical port is not performing network-side or bidirectional procedures then this object is not applicable. |
| 1.3.6.1.4.1.664.5.70.29.1.1.3.1.13 | ColumnadGenFrGroupCurrentLmiInvalidIn | read-only | current | The number of invalid LMI messages received by this logical port. |
| 1.3.6.1.4.1.664.5.70.29.1.1.3.1.14 | ColumnadGenFrGroupCurrentLmiStatusEnqTimeouts | read-only | current | The number of times this logical port has failed to receive a Status Enquiry message in T392 seconds. If the logical port is not performing network-side or bid… |
| 1.3.6.1.4.1.664.5.70.29.1.1.3.1.15 | ColumnadGenFrGroupCurrentLmiStatusTimeouts | read-only | current | The number of times this logical port has failed to receive a Status message in a polling interval (within T391 seconds). If the logical port is not performing… |
| 1.3.6.1.4.1.664.5.70.29.1.1.3.1.16 | ColumnadGenFrGroupCurrentNetworkInactive | read-only | current | TODO. If the logical port is not performing user-side or bidirectional procedures then this object is not applicable. |
| 1.3.6.1.4.1.664.5.70.29.1.1.4 | TableadGenFrGroupIntervalTable | not-accessible | current | The FR Group Interval Table contains various statistics collected by each Frame Relay Group over the previous 24 hours of operation. The past 24 hours are brok… |
| 1.3.6.1.4.1.664.5.70.29.1.1.4.1 | RowadGenFrGroupIntervalEntry | not-accessible | current | An entry in the FR Group Interval table |
| 1.3.6.1.4.1.664.5.70.29.1.1.4.1.1 | ColumnadGenFrGroupIntervalNumber | not-accessible | current | A number between 1 and 96, where 1 is the most recently completed 15-minute interval and 96 is the least recently completed 15-minute interval (assuming that a… |
| 1.3.6.1.4.1.664.5.70.29.1.1.4.1.2 | ColumnadGenFrGroupIntervalTimeStamp | read-only | current | Timestamp of the 15-minute interval |
| 1.3.6.1.4.1.664.5.70.29.1.1.4.1.3 | ColumnadGenFrGroupIntervalInOctets | read-only | current | The number of octets received on the FR Group. |
| 1.3.6.1.4.1.664.5.70.29.1.1.4.1.4 | ColumnadGenFrGroupIntervalInPkts | read-only | current | The number of packets received on the FR Group. |
| 1.3.6.1.4.1.664.5.70.29.1.1.4.1.5 | ColumnadGenFrGroupIntervalInDiscards | read-only | current | The number of received packets discarded on the FR Group. |
| 1.3.6.1.4.1.664.5.70.29.1.1.4.1.6 | ColumnadGenFrGroupIntervalInErrors | read-only | current | The number of errored packets received on the FR Group. |
| 1.3.6.1.4.1.664.5.70.29.1.1.4.1.7 | ColumnadGenFrGroupIntervalOutOctets | read-only | current | The number of octets transmitted on the FR Group. |
| 1.3.6.1.4.1.664.5.70.29.1.1.4.1.8 | ColumnadGenFrGroupIntervalOutPkts | read-only | current | The number of packets transmitted on the FR Group. |
| 1.3.6.1.4.1.664.5.70.29.1.1.4.1.9 | ColumnadGenFrGroupIntervalOutDiscards | read-only | current | The number of transmit packets discarded on the FR Group. |
| 1.3.6.1.4.1.664.5.70.29.1.1.4.1.10 | ColumnadGenFrGroupIntervalOutErrors | read-only | current | The number of errored packets transmitted on the FR Group. |
| 1.3.6.1.4.1.664.5.70.29.1.1.4.1.11 | ColumnadGenFrGroupIntervalLmiEnquiryIn | read-only | current | The number of Status Enquiry messages received. If the logical port is not performing network-side or bidirectional procedures then this object is not applicab… |
| 1.3.6.1.4.1.664.5.70.29.1.1.4.1.12 | ColumnadGenFrGroupIntervalLmiEnquiryOut | read-only | current | The number of Status Enquiry messages transmitted. If the logical port is not performing user-side or bidirectional procedures then this object is not applicab… |
| 1.3.6.1.4.1.664.5.70.29.1.1.4.1.13 | ColumnadGenFrGroupIntervalLmiStatusIn | read-only | current | The number of Status messages received. If the logical port is not performing user-side or bidirectional procedures then this object is not applicable. |
| 1.3.6.1.4.1.664.5.70.29.1.1.4.1.14 | ColumnadGenFrGroupIntervalLmiStatusOut | read-only | current | The number of Status messages transmitted. If the logical port is not performing network-side or bidirectional procedures then this object is not applicable. |
| 1.3.6.1.4.1.664.5.70.29.1.1.4.1.15 | ColumnadGenFrGroupIntervalLmiInvalidIn | read-only | current | The number of invalid LMI messages received by this logical port. |
| 1.3.6.1.4.1.664.5.70.29.1.1.4.1.16 | ColumnadGenFrGroupIntervalLmiStatusEnqTimeouts | read-only | current | The number of times this logical port has failed to receive a Status Enquiry message in T392 seconds. If the logical port is not performing network-side or bid… |
| 1.3.6.1.4.1.664.5.70.29.1.1.4.1.17 | ColumnadGenFrGroupIntervalLmiStatusTimeouts | read-only | current | The number of times this logical port has failed to receive a Status message in a polling interval (within T391 seconds). If the logical port is not performing… |
| 1.3.6.1.4.1.664.5.70.29.1.1.4.1.18 | ColumnadGenFrGroupIntervalNetworkInactive | read-only | current | TODO. If the logical port is not performing user-side or bidirectional procedures then this object is not applicable. |
| 1.3.6.1.4.1.664.5.70.29.1.1.5 | TableadGenFrGroupDayCurrentTable | not-accessible | current | The FR Group current day table contains performance monitoring data for the current 24-hour interval. |
| 1.3.6.1.4.1.664.5.70.29.1.1.5.1 | RowadGenFrGroupDayCurrentEntry | not-accessible | current | An entry in the FR Group current day table |
| 1.3.6.1.4.1.664.5.70.29.1.1.5.1.1 | ColumnadGenFrGroupDayCurrentInOctets | read-only | current | The number of octets received on the FR Group. |
| 1.3.6.1.4.1.664.5.70.29.1.1.5.1.2 | ColumnadGenFrGroupDayCurrentInPkts | read-only | current | The number of packets received on the FR Group. |
| 1.3.6.1.4.1.664.5.70.29.1.1.5.1.3 | ColumnadGenFrGroupDayCurrentInDiscards | read-only | current | The number of received packets discarded on the FR Group. |
| 1.3.6.1.4.1.664.5.70.29.1.1.5.1.4 | ColumnadGenFrGroupDayCurrentInErrors | read-only | current | The number of errored packets received on the FR Group. |
| 1.3.6.1.4.1.664.5.70.29.1.1.5.1.5 | ColumnadGenFrGroupDayCurrentOutOctets | read-only | current | The number of octets transmitted on the FR Group. |
| 1.3.6.1.4.1.664.5.70.29.1.1.5.1.6 | ColumnadGenFrGroupDayCurrentOutPkts | read-only | current | The number of packets transmitted on the FR Group. |
| 1.3.6.1.4.1.664.5.70.29.1.1.5.1.7 | ColumnadGenFrGroupDayCurrentOutDiscards | read-only | current | The number of transmit packets discarded on the FR Group. |
| 1.3.6.1.4.1.664.5.70.29.1.1.5.1.8 | ColumnadGenFrGroupDayCurrentOutErrors | read-only | current | The number of errored packets transmitted on the FR Group. |
| 1.3.6.1.4.1.664.5.70.29.1.1.5.1.9 | ColumnadGenFrGroupDayCurrentLmiEnquiryIn | read-only | current | The number of Status Enquiry messages received. If the logical port is not performing network-side or bidirectional procedures then this object is not applicab… |
| 1.3.6.1.4.1.664.5.70.29.1.1.5.1.10 | ColumnadGenFrGroupDayCurrentLmiEnquiryOut | read-only | current | The number of Status Enquiry messages transmitted. If the logical port is not performing user-side or bidirectional procedures then this object is not applicab… |
| 1.3.6.1.4.1.664.5.70.29.1.1.5.1.11 | ColumnadGenFrGroupDayCurrentLmiStatusIn | read-only | current | The number of Status messages received. If the logical port is not performing user-side or bidirectional procedures then this object is not applicable. |
| 1.3.6.1.4.1.664.5.70.29.1.1.5.1.12 | ColumnadGenFrGroupDayCurrentLmiStatusOut | read-only | current | The number of Status messages transmitted. If the logical port is not performing network-side or bidirectional procedures then this object is not applicable. |
| 1.3.6.1.4.1.664.5.70.29.1.1.5.1.13 | ColumnadGenFrGroupDayCurrentLmiInvalidIn | read-only | current | The number of invalid LMI messages received by this logical port. |
| 1.3.6.1.4.1.664.5.70.29.1.1.5.1.14 | ColumnadGenFrGroupDayCurrentLmiStatusEnqTimeouts | read-only | current | The number of times this logical port has failed to receive a Status Enquiry message in T392 seconds. If the logical port is not performing network-side or bid… |
| 1.3.6.1.4.1.664.5.70.29.1.1.5.1.15 | ColumnadGenFrGroupDayCurrentLmiStatusTimeouts | read-only | current | The number of times this logical port has failed to receive a Status message in a polling interval (within T391 seconds). If the logical port is not performing… |
| 1.3.6.1.4.1.664.5.70.29.1.1.5.1.16 | ColumnadGenFrGroupDayCurrentNetworkInactive | read-only | current | TODO. If the logical port is not performing user-side or bidirectional procedures then this object is not applicable. |
| 1.3.6.1.4.1.664.5.70.29.1.1.6 | TableadGenFrGroupDayIntervalTable | not-accessible | current | The FR Group Day Interval Table contains various statistics collected by each Frame Relay Group over the previous 7 days of operation. The past 7 days are brok… |
| 1.3.6.1.4.1.664.5.70.29.1.1.6.1 | RowadGenFrGroupDayIntervalEntry | not-accessible | current | An entry in the FR Group Interval table |
| 1.3.6.1.4.1.664.5.70.29.1.1.6.1.1 | ColumnadGenFrGroupDayIntervalNumber | not-accessible | current | A number between 1 and 7, where 1 is the most recently completed 24-hour interval and 96 is the least recently completed 24-hour interval (assuming that all 7 … |
| 1.3.6.1.4.1.664.5.70.29.1.1.6.1.2 | ColumnadGenFrGroupDayIntervalTimeStamp | read-only | current | Timestamp of the 15-minute interval |
| 1.3.6.1.4.1.664.5.70.29.1.1.6.1.3 | ColumnadGenFrGroupDayIntervalInOctets | read-only | current | The number of octets received on the FR Group. |
| 1.3.6.1.4.1.664.5.70.29.1.1.6.1.4 | ColumnadGenFrGroupDayIntervalInPkts | read-only | current | The number of packets received on the FR Group. |
| 1.3.6.1.4.1.664.5.70.29.1.1.6.1.5 | ColumnadGenFrGroupDayIntervalInDiscards | read-only | current | The number of received packets discarded on the FR Group. |
| 1.3.6.1.4.1.664.5.70.29.1.1.6.1.6 | ColumnadGenFrGroupDayIntervalInErrors | read-only | current | The number of errored packets received on the FR Group. |
| 1.3.6.1.4.1.664.5.70.29.1.1.6.1.7 | ColumnadGenFrGroupDayIntervalOutOctets | read-only | current | The number of octets transmitted on the FR Group. |
| 1.3.6.1.4.1.664.5.70.29.1.1.6.1.8 | ColumnadGenFrGroupDayIntervalOutPkts | read-only | current | The number of packets transmitted on the FR Group. |
| 1.3.6.1.4.1.664.5.70.29.1.1.6.1.9 | ColumnadGenFrGroupDayIntervalOutDiscards | read-only | current | The number of transmit packets discarded on the FR Group. |
| 1.3.6.1.4.1.664.5.70.29.1.1.6.1.10 | ColumnadGenFrGroupDayIntervalOutErrors | read-only | current | The number of errored packets transmitted on the FR Group. |
| 1.3.6.1.4.1.664.5.70.29.1.1.6.1.11 | ColumnadGenFrGroupDayIntervalLmiEnquiryIn | read-only | current | The number of Status Enquiry messages received. If the logical port is not performing network-side or bidirectional procedures then this object is not applicab… |
| 1.3.6.1.4.1.664.5.70.29.1.1.6.1.12 | ColumnadGenFrGroupDayIntervalLmiEnquiryOut | read-only | current | The number of Status Enquiry messages transmitted. If the logical port is not performing user-side or bidirectional procedures then this object is not applicab… |
| 1.3.6.1.4.1.664.5.70.29.1.1.6.1.13 | ColumnadGenFrGroupDayIntervalLmiStatusIn | read-only | current | The number of Status messages received. If the logical port is not performing user-side or bidirectional procedures then this object is not applicable. |
| 1.3.6.1.4.1.664.5.70.29.1.1.6.1.14 | ColumnadGenFrGroupDayIntervalLmiStatusOut | read-only | current | The number of Status messages transmitted. If the logical port is not performing network-side or bidirectional procedures then this object is not applicable. |
| 1.3.6.1.4.1.664.5.70.29.1.1.6.1.15 | ColumnadGenFrGroupDayIntervalLmiInvalidIn | read-only | current | The number of invalid LMI messages received by this logical port. |
| 1.3.6.1.4.1.664.5.70.29.1.1.6.1.16 | ColumnadGenFrGroupDayIntervalLmiStatusEnqTimeouts | read-only | current | The number of times this logical port has failed to receive a Status Enquiry message in T392 seconds. If the logical port is not performing network-side or bid… |
| 1.3.6.1.4.1.664.5.70.29.1.1.6.1.17 | ColumnadGenFrGroupDayIntervalLmiStatusTimeouts | read-only | current | The number of times this logical port has failed to receive a Status message in a polling interval (within T391 seconds). If the logical port is not performing… |
| 1.3.6.1.4.1.664.5.70.29.1.1.6.1.18 | ColumnadGenFrGroupDayIntervalNetworkInactive | read-only | current | TODO. If the logical port is not performing user-side or bidirectional procedures then this object is not applicable. |
| 1.3.6.1.4.1.664.5.70.29.1.2 | NodeadGenFrLink | |||
| 1.3.6.1.4.1.664.5.70.29.1.2.2 | TableadGenFrLinkTable | not-accessible | current | This table provides provisioning and status information on all frame relay links. |
| 1.3.6.1.4.1.664.5.70.29.1.2.2.1 | RowadGenFrLinkEntry | not-accessible | current | The Frame Relay Link provisioning and status table entry. |
| 1.3.6.1.4.1.664.5.70.29.1.2.2.1.1 | ColumnadGenFrLinkGroupIfIndex | not-accessible | current | This object represents the frame relay group to which this frame relay link is to be connected. |
| 1.3.6.1.4.1.664.5.70.29.1.2.2.1.2 | ColumnadGenFrLinkIfIndex | not-accessible | current | This object represents the physical T1/E1 link to which this frame relay link is to constructed from. |
| 1.3.6.1.4.1.664.5.70.29.1.2.2.1.3 | ColumnadGenFrLinkBundleId | not-accessible | current | This object represents the ds0 bundle ID number for this frame relay link. Some hardware implementations will only support a single ds0 bundle per T1/E1 link. … |
| 1.3.6.1.4.1.664.5.70.29.1.2.2.1.4 | ColumnadGenFrLinkRowStatus | read-create | current | The adGenFrLinkRowStatus object allows create, change, and delete operations on the Frame Relay link. |
| 1.3.6.1.4.1.664.5.70.29.1.2.2.1.5 | ColumnadGenFrLinkTimeslots | read-create | current | The adGenFrLinkTimeslots is a string representation of the timeslot or timeslot range that describes the active ds0's for this link. For example: To indicate t… |
| 1.3.6.1.4.1.664.5.70.29.1.2.2.1.7 | ColumnadGenFrLinkStatusString | read-only | current | The reason, if any, why the frame relay link is not in an operational state due to provisioning or hardware limitations. |
| 1.3.6.1.4.1.664.5.70.29.1.3 | NodeadGenFrPVC | |||
| 1.3.6.1.4.1.664.5.70.29.1.3.4 | TableadGenFrPVCTable | not-accessible | current | This table provides provisioning and status information on all frame relay virtual circuits (PVCs). |
| 1.3.6.1.4.1.664.5.70.29.1.3.4.1 | RowadGenFrPVCEntry | not-accessible | current | The Frame Relay PVC supplemental provisioning and status table entry. To create a Frame Relay PVC, the following procedures are used: (1) The management applic… |
| 1.3.6.1.4.1.664.5.70.29.1.3.4.1.1 | ColumnadGenFrPVCIfIndex | read-only | current | The value of this object is equal to the ifIndex value for this PVC end-point. |
| 1.3.6.1.4.1.664.5.70.29.1.3.4.1.2 | ColumnadGenFrPVCDLCIIndex | read-only | current | The value of this object is equal to the DLCI value for this PVC end-point. The values are restricted to the legal range for the size of address field supporte… |
| 1.3.6.1.4.1.664.5.70.29.1.3.4.1.3 | ColumnadGenFrPVCStatusString | read-only | current | The reason, if any, why the why the PVC is not in an operational state due to provisioning or hardware limitations. |
| 1.3.6.1.4.1.664.5.70.29.1.3.4.1.4 | ColumnadGenFrPVCAdminStatus | read-create | current | The desired state of the frame relay PVC. This object must be set to up(1) or testing(3) to enable user data transmission on the PVC. |
| 1.3.6.1.4.1.664.5.70.29.1.3.4.1.5 | ColumnadGenFrPVCState | read-only | current | This object provides the operation state information of the PVC. |
| 1.3.6.1.4.1.664.5.70.29.1.3.4.1.6 | ColumnadGenFrPVCEncapsulation | read-create | current | The network protocol encapsulated on this frame relay PVC. |
| 1.3.6.1.4.1.664.5.70.29.1.3.4.1.7 | ColumnadGenFrPVCPrimaryPeerIpAddressType | read-create | current | IP address type (ipv4 or ipv6) represented by in the adGenFrPVCPrimaryPeerIpAddress column. This oid is only significant if the adGenFrPVCEncapsulation is ipv4… |
| 1.3.6.1.4.1.664.5.70.29.1.3.4.1.8 | ColumnadGenFrPVCPrimaryPeerIpAddress | read-create | current | Provisioned Primary Peer IP address. If this object is set to a valid non-zero IP address and Inverse ARP is enabled, the address much match that learned from … |
| 1.3.6.1.4.1.664.5.70.29.1.3.4.1.9 | ColumnadGenFrPVCSecondaryPeerAddressType | read-create | current | IP address type (ipv4 or ipv6) represented by in the adGenFrPVCSecondaryPeerIpAddress column. This oid is only significant if the adGenFrPVCEncapsulation is ip… |
| 1.3.6.1.4.1.664.5.70.29.1.3.4.1.10 | ColumnadGenFrPVCSecondaryPeerIpAddress | read-create | current | Provisioned Secondary Peer IP address. If this object is set to a valid non-zero IP address and Inverse ARP is enabled, the address much match that learned fro… |
| 1.3.6.1.4.1.664.5.70.29.1.3.4.1.11 | ColumnadGenFrPVCPrimaryGatewayAddressType | read-create | current | IP address type (ipv4 or ipv6) represented by in the adGenFrPVCPrimaryGatewayAddress column. This oid is only significant if the adGenFrPVCEncapsulation is ipv… |
| 1.3.6.1.4.1.664.5.70.29.1.3.4.1.12 | ColumnadGenFrPVCPrimaryGatewayAddress | read-create | current | The primary gateway IP address for the peer. This oid is only significant if the adGenFrPVCEncapsulation is ipv4 or ipv6. |
| 1.3.6.1.4.1.664.5.70.29.1.3.4.1.19 | ColumnadGenFrPVCInverseArpEnable | read-create | current | Setting this value to true enables transmission of Inverse ARP requests by this frame relay PVC. If the encapsulation protocol is not ipv4, this oid has no eff… |
| 1.3.6.1.4.1.664.5.70.29.1.3.4.1.20 | ColumnadGenFrPVCLearnedPrimaryPeerIpAddressType | read-only | current | Learned IP address type (ipv4 or ipv6) represented by in the adGenFrPVCLearnedPrimaryPeerIpAddress column. This oid is only significant if the adGenFrPVCEncaps… |
| 1.3.6.1.4.1.664.5.70.29.1.3.4.1.21 | ColumnadGenFrPVCLearnedPrimaryPeerIpAddress | read-only | current | Learned Primary Peer IP address. This value is learned through the Inverse ARP protocol mechanism. |
| 1.3.6.1.4.1.664.5.70.29.1.3.4.1.22 | ColumnadGenFrPVCLearnedSecondaryPeerAddressType | read-only | current | Learned IP address type (ipv4 or ipv6) represented by in the adGenFrPVCLearnedSecondaryPeerIpAddress column. This oid is only significant if the adGenFrPVCEnca… |
| 1.3.6.1.4.1.664.5.70.29.1.3.4.1.23 | ColumnadGenFrPVCLearnedSecondaryPeerIpAddress | read-only | current | Learned Secondary Peer IP address. This value is learned through the Inverse ARP protocol mechanism. |
| 1.3.6.1.4.1.664.5.70.29.1.3.4.1.24 | ColumnadGenFrPVCClearCounters | read-create | current | Writing a value of 1 will reset the PVC statistics for this logical port. |
| 1.3.6.1.4.1.664.5.70.29.1.3.4.1.25 | ColumnadGenFrPVCClearPmHistory | read-create | current | Writing a value of 1 will reset the interface performance monitoring statistics/intervals for this logical port. |
| 1.3.6.1.4.1.664.5.70.29.1.3.4.1.26 | ColumnadGenFrPVCOperStatus | read-only | current | The current operational state of the PVC. |
| 1.3.6.1.4.1.664.5.70.29.1.3.4.1.27 | ColumnadGenFrPVCLastChange | read-only | current | The value of sysUpTime at the time the PVC entered its current operational state. If the current state was entered prior to the last re-initialization of the l… |
| 1.3.6.1.4.1.664.5.70.29.1.3.4.1.28 | ColumnadGenFrPVCDescription | read-create | current | A descriptive name for the PVC |
| 1.3.6.1.4.1.664.5.70.29.1.3.4.1.29 | ColumnadGenFrPVCMtu | read-create | current | The size of the largest packet which can be sent/received on the interface, specified in octets. For a PVC, this is the size of the frame relay payload and doe… |
| 1.3.6.1.4.1.664.5.70.29.1.3.5 | TableadGenFrPVCCurrentTable | not-accessible | current | The FR PVC current table contains performance monitoring data for the current 15-minute interval. |
| 1.3.6.1.4.1.664.5.70.29.1.3.5.1 | RowadGenFrPVCCurrentEntry | not-accessible | current | An entry in the FR PVC Current table |
| 1.3.6.1.4.1.664.5.70.29.1.3.5.1.1 | ColumnadGenFrPVCCurrentInOctets | read-only | current | The number of octets received on the FR PVC. |
| 1.3.6.1.4.1.664.5.70.29.1.3.5.1.2 | ColumnadGenFrPVCCurrentInPkts | read-only | current | The number of packets received on the FR PVC. |
| 1.3.6.1.4.1.664.5.70.29.1.3.5.1.3 | ColumnadGenFrPVCCurrentInDiscards | read-only | current | The number of received packets discarded on the FR PVC. |
| 1.3.6.1.4.1.664.5.70.29.1.3.5.1.5 | ColumnadGenFrPVCCurrentOutOctets | read-only | current | The number of octets transmitted on the FR PVC. |
| 1.3.6.1.4.1.664.5.70.29.1.3.5.1.6 | ColumnadGenFrPVCCurrentOutPkts | read-only | current | The number of packets transmitted on the FR PVC. |
| 1.3.6.1.4.1.664.5.70.29.1.3.5.1.7 | ColumnadGenFrPVCCurrentOutDiscards | read-only | current | The number of transmit packets discarded on the FR PVC. |
| 1.3.6.1.4.1.664.5.70.29.1.3.5.1.9 | ColumnadGenFrPVCCurrentPktsFECN1In | read-only | current | The number of packets received with the Forward Explicit Congestion Notification bit set to 1. |
| 1.3.6.1.4.1.664.5.70.29.1.3.5.1.10 | ColumnadGenFrPVCCurrentPktsFECN1Out | read-only | current | The number of packets transmitted with the Forward Explicit Congestion Notification bit set to 1. |
| 1.3.6.1.4.1.664.5.70.29.1.3.5.1.11 | ColumnadGenFrPVCCurrentPktsBECN1In | read-only | current | The number of packets received with the Backward Explicit Congestion Notification bit set to 1. |
| 1.3.6.1.4.1.664.5.70.29.1.3.5.1.12 | ColumnadGenFrPVCCurrentPktsBECN1Out | read-only | current | The number of packets transmitted with the Backward Explicit Congestion Notification bit set to 1. |
| 1.3.6.1.4.1.664.5.70.29.1.3.5.1.13 | ColumnadGenFrPVCCurrentPktsDE1In | read-only | current | The number of packets received with the Discard Eligible bit set to 1. |
| 1.3.6.1.4.1.664.5.70.29.1.3.5.1.14 | ColumnadGenFrPVCCurrentPktsDE1Out | read-only | current | The number of packets transmitted with the Discard Eligible bit set to 1. |
| 1.3.6.1.4.1.664.5.70.29.1.3.5.1.15 | ColumnadGenFrPVCCurrentOctetsDE1In | read-only | current | The number of octets received with the Discard Eligible bit set to 1. |
| 1.3.6.1.4.1.664.5.70.29.1.3.5.1.16 | ColumnadGenFrPVCCurrentOctetsDE1Out | read-only | current | The number of octets transmitted with the Discard Eligible bit set to 1. |
| 1.3.6.1.4.1.664.5.70.29.1.3.6 | TableadGenFrPVCIntervalTable | not-accessible | current | The FR PVC Interval Table contains various statistics collected by each Frame Relay PVC over the previous 24 hours of operation. The past 24 hours are broken i… |
| 1.3.6.1.4.1.664.5.70.29.1.3.6.1 | RowadGenFrPVCIntervalEntry | not-accessible | current | An entry in the FR PVC Interval table |
| 1.3.6.1.4.1.664.5.70.29.1.3.6.1.1 | ColumnadGenFrPVCIntervalNumber | not-accessible | current | A number between 1 and 96, where 1 is the most recently completed 15-minute interval and 96 is the least recently completed 15-minute interval (assuming that a… |
| 1.3.6.1.4.1.664.5.70.29.1.3.6.1.2 | ColumnadGenFrPVCIntervalTimeStamp | read-only | current | Timestamp of the 15-minute interval |
| 1.3.6.1.4.1.664.5.70.29.1.3.6.1.3 | ColumnadGenFrPVCIntervalInOctets | read-only | current | The number of octets received on the FR PVC. |
| 1.3.6.1.4.1.664.5.70.29.1.3.6.1.4 | ColumnadGenFrPVCIntervalInPkts | read-only | current | The number of packets received on the FR PVC. |
| 1.3.6.1.4.1.664.5.70.29.1.3.6.1.5 | ColumnadGenFrPVCIntervalInDiscards | read-only | current | The number of received packets discarded on the FR PVC. |
| 1.3.6.1.4.1.664.5.70.29.1.3.6.1.7 | ColumnadGenFrPVCIntervalOutOctets | read-only | current | The number of octets transmitted on the FR PVC. |
| 1.3.6.1.4.1.664.5.70.29.1.3.6.1.8 | ColumnadGenFrPVCIntervalOutPkts | read-only | current | The number of packets transmitted on the FR PVC. |
| 1.3.6.1.4.1.664.5.70.29.1.3.6.1.9 | ColumnadGenFrPVCIntervalOutDiscards | read-only | current | The number of transmit packets discarded on the FR PVC. |
| 1.3.6.1.4.1.664.5.70.29.1.3.6.1.11 | ColumnadGenFrPVCIntervalPktsFECN1In | read-only | current | The number of packets received with the Forward Explicit Congestion Notification bit set to 1. |
| 1.3.6.1.4.1.664.5.70.29.1.3.6.1.12 | ColumnadGenFrPVCIntervalPktsFECN1Out | read-only | current | The number of packets transmitted with the Forward Explicit Congestion Notification bit set to 1. |
| 1.3.6.1.4.1.664.5.70.29.1.3.6.1.13 | ColumnadGenFrPVCIntervalPktsBECN1In | read-only | current | The number of packets received with the Backward Explicit Congestion Notification bit set to 1. |
| 1.3.6.1.4.1.664.5.70.29.1.3.6.1.14 | ColumnadGenFrPVCIntervalPktsBECN1Out | read-only | current | The number of packets transmitted with the Backward Explicit Congestion Notification bit set to 1. |
| 1.3.6.1.4.1.664.5.70.29.1.3.6.1.15 | ColumnadGenFrPVCIntervalPktsDE1In | read-only | current | The number of packets received with the Discard Eligible bit set to 1. |
| 1.3.6.1.4.1.664.5.70.29.1.3.6.1.16 | ColumnadGenFrPVCIntervalPktsDE1Out | read-only | current | The number of packets transmitted with the Discard Eligible bit set to 1. |
| 1.3.6.1.4.1.664.5.70.29.1.3.6.1.17 | ColumnadGenFrPVCIntervalOctetsDE1In | read-only | current | The number of octets received with the Discard Eligible bit set to 1. |
| 1.3.6.1.4.1.664.5.70.29.1.3.6.1.18 | ColumnadGenFrPVCIntervalOctetsDE1Out | read-only | current | The number of octets transmitted with the Discard Eligible bit set to 1. |
| 1.3.6.1.4.1.664.5.70.29.1.3.7 | TableadGenFrPVCDayCurrentTable | not-accessible | current | The FR PVC current day table contains performance monitoring data for the current 24-hour interval. |
| 1.3.6.1.4.1.664.5.70.29.1.3.7.1 | RowadGenFrPVCDayCurrentEntry | not-accessible | current | An entry in the FR PVC current day table |
| 1.3.6.1.4.1.664.5.70.29.1.3.7.1.1 | ColumnadGenFrPVCDayCurrentInOctets | read-only | current | The number of octets received on the FR PVC. |
| 1.3.6.1.4.1.664.5.70.29.1.3.7.1.2 | ColumnadGenFrPVCDayCurrentInPkts | read-only | current | The number of packets received on the FR PVC. |
| 1.3.6.1.4.1.664.5.70.29.1.3.7.1.3 | ColumnadGenFrPVCDayCurrentInDiscards | read-only | current | The number of received packets discarded on the FR PVC. |
| 1.3.6.1.4.1.664.5.70.29.1.3.7.1.5 | ColumnadGenFrPVCDayCurrentOutOctets | read-only | current | The number of octets transmitted on the FR PVC. |
| 1.3.6.1.4.1.664.5.70.29.1.3.7.1.6 | ColumnadGenFrPVCDayCurrentOutPkts | read-only | current | The number of packets transmitted on the FR PVC. |
| 1.3.6.1.4.1.664.5.70.29.1.3.7.1.7 | ColumnadGenFrPVCDayCurrentOutDiscards | read-only | current | The number of transmit packets discarded on the FR PVC. |
| 1.3.6.1.4.1.664.5.70.29.1.3.7.1.9 | ColumnadGenFrPVCDayCurrentPktsFECN1In | read-only | current | The number of packets received with the Forward Explicit Congestion Notification bit set to 1. |
| 1.3.6.1.4.1.664.5.70.29.1.3.7.1.10 | ColumnadGenFrPVCDayCurrentPktsFECN1Out | read-only | current | The number of packets transmitted with the Forward Explicit Congestion Notification bit set to 1. |
| 1.3.6.1.4.1.664.5.70.29.1.3.7.1.11 | ColumnadGenFrPVCDayCurrentPktsBECN1In | read-only | current | The number of packets received with the Backward Explicit Congestion Notification bit set to 1. |
| 1.3.6.1.4.1.664.5.70.29.1.3.7.1.12 | ColumnadGenFrPVCDayCurrentPktsBECN1Out | read-only | current | The number of packets transmitted with the Backward Explicit Congestion Notification bit set to 1. |
| 1.3.6.1.4.1.664.5.70.29.1.3.7.1.13 | ColumnadGenFrPVCDayCurrentPktsDE1In | read-only | current | The number of packets received with the Discard Eligible bit set to 1. |
| 1.3.6.1.4.1.664.5.70.29.1.3.7.1.14 | ColumnadGenFrPVCDayCurrentPktsDE1Out | read-only | current | The number of packets transmitted with the Discard Eligible bit set to 1. |
| 1.3.6.1.4.1.664.5.70.29.1.3.7.1.15 | ColumnadGenFrPVCDayCurrentOctetsDE1In | read-only | current | The number of octets received with the Discard Eligible bit set to 1. |
| 1.3.6.1.4.1.664.5.70.29.1.3.7.1.16 | ColumnadGenFrPVCDayCurrentOctetsDE1Out | read-only | current | The number of octets transmitted with the Discard Eligible bit set to 1. |
| 1.3.6.1.4.1.664.5.70.29.1.3.8 | TableadGenFrPVCDayIntervalTable | not-accessible | current | The FR PVC Day Interval Table contains various statistics collected by each Frame Relay PVC over the previous 7 days of operation. The past 7 days are broken i… |
| 1.3.6.1.4.1.664.5.70.29.1.3.8.1 | RowadGenFrPVCDayIntervalEntry | not-accessible | current | An entry in the FR PVC Day Interval table |
| 1.3.6.1.4.1.664.5.70.29.1.3.8.1.1 | ColumnadGenFrPVCDayIntervalNumber | not-accessible | current | A number between 1 and 7, where 1 is the most recently completed 24-hour interval and 96 is the least recently completed 24-hour interval (assuming that all 7 … |
| 1.3.6.1.4.1.664.5.70.29.1.3.8.1.2 | ColumnadGenFrPVCDayIntervalTimeStamp | read-only | current | Timestamp of the 15-minute interval |
| 1.3.6.1.4.1.664.5.70.29.1.3.8.1.3 | ColumnadGenFrPVCDayIntervalInOctets | read-only | current | The number of octets received on the FR PVC. |
| 1.3.6.1.4.1.664.5.70.29.1.3.8.1.4 | ColumnadGenFrPVCDayIntervalInPkts | read-only | current | The number of packets received on the FR PVC. |
| 1.3.6.1.4.1.664.5.70.29.1.3.8.1.5 | ColumnadGenFrPVCDayIntervalInDiscards | read-only | current | The number of received packets discarded on the FR PVC. |
| 1.3.6.1.4.1.664.5.70.29.1.3.8.1.7 | ColumnadGenFrPVCDayIntervalOutOctets | read-only | current | The number of octets transmitted on the FR PVC. |
| 1.3.6.1.4.1.664.5.70.29.1.3.8.1.8 | ColumnadGenFrPVCDayIntervalOutPkts | read-only | current | The number of packets transmitted on the FR PVC. |
| 1.3.6.1.4.1.664.5.70.29.1.3.8.1.9 | ColumnadGenFrPVCDayIntervalOutDiscards | read-only | current | The number of transmit packets discarded on the FR PVC. |
| 1.3.6.1.4.1.664.5.70.29.1.3.8.1.11 | ColumnadGenFrPVCDayIntervalPktsFECN1In | read-only | current | The number of packets received with the Forward Explicit Congestion Notification bit set to 1. |
| 1.3.6.1.4.1.664.5.70.29.1.3.8.1.12 | ColumnadGenFrPVCDayIntervalPktsFECN1Out | read-only | current | The number of packets transmitted with the Forward Explicit Congestion Notification bit set to 1. |
| 1.3.6.1.4.1.664.5.70.29.1.3.8.1.13 | ColumnadGenFrPVCDayIntervalPktsBECN1In | read-only | current | The number of packets received with the Backward Explicit Congestion Notification bit set to 1. |
| 1.3.6.1.4.1.664.5.70.29.1.3.8.1.14 | ColumnadGenFrPVCDayIntervalPktsBECN1Out | read-only | current | The number of packets transmitted with the Backward Explicit Congestion Notification bit set to 1. |
| 1.3.6.1.4.1.664.5.70.29.1.3.8.1.15 | ColumnadGenFrPVCDayIntervalPktsDE1In | read-only | current | The number of packets received with the Discard Eligible bit set to 1. |
| 1.3.6.1.4.1.664.5.70.29.1.3.8.1.16 | ColumnadGenFrPVCDayIntervalPktsDE1Out | read-only | current | The number of packets transmitted with the Discard Eligible bit set to 1. |
| 1.3.6.1.4.1.664.5.70.29.1.3.8.1.17 | ColumnadGenFrPVCDayIntervalOctetsDE1In | read-only | current | The number of octets received with the Discard Eligible bit set to 1. |
| 1.3.6.1.4.1.664.5.70.29.1.3.8.1.18 | ColumnadGenFrPVCDayIntervalOctetsDE1Out | read-only | current | The number of octets transmitted with the Discard Eligible bit set to 1. |
| 1.3.6.1.4.1.664.5.70.29.1.4 | NodeadGenFrSlot | |||
| 1.3.6.1.4.1.664.5.70.29.1.4.1 | TableadGenFrSlotTable | not-accessible | current | This table provides frame relay group/bearer channel and PVC slot specific information. |
| 1.3.6.1.4.1.664.5.70.29.1.4.1.1 | RowadGenFrSlotEntry | not-accessible | current | Slot specific Frame Relay Group information. |
| 1.3.6.1.4.1.664.5.70.29.1.4.1.1.1 | ColumnadGenFrSlotGroupLastCreateError | read-only | current | The reason for the last error that occurred while attempting to create an entry in the Frame Relay Group Table (adGenFrGroupTable) on a specific slot. |
| 1.3.6.1.4.1.664.5.70.29.1.4.1.1.2 | ColumnadGenFrSlotPVCMaxNumber | read-only | current | Maximum number of allowed Frame Relay PVCs on this slot. Each access module provides a pool of available PVC resources that may be assigned to any Frame Relay … |
| 1.3.6.1.4.1.664.5.70.29.1.4.1.1.3 | ColumnadGenFrSlotPVCCurrentNumber | read-only | current | The current number of Frame Relay PVC resources currently in use on this slot. Each access module provides a pool of available PVC resources that may be assign… |
| 1.3.6.1.4.1.664.5.70.29.2 | NodeadGenFrAlarmsPrefix | |||
| 1.3.6.1.4.1.664.5.70.29.2.0 | NodeadGenFrAlarms | |||
| 1.3.6.1.4.1.664.5.70.29.2.0.1 | NotificationadGenFrGroupDownAlarmClr | current | A adGenFrGroupDownAlarm clear is sent when the local in-channel signaling protocol indicates that it is in the active(2) state. If Frame Relay signaling is dis… | |
| 1.3.6.1.4.1.664.5.70.29.2.0.2 | NotificationadGenFrGroupDownAlarmAct | current | A adGenFrGroupDownAlarm active is sent when the local in-channel signaling protocol indicates that it is in a state other than active(2). If Frame Relay signal… | |
| 1.3.6.1.4.1.664.5.70.29.2.0.3 | NotificationadGenFrDlciDownAlarmClr | current | A adGenFrDlciDownAlarm clear is sent when data DLCI is in the active(2) state and is capable of passing user traffic. | |
| 1.3.6.1.4.1.664.5.70.29.2.0.4 | NotificationadGenFrDlciDownAlarmAct | current | A adGenFrDlciDownAlarm clear is sent when data DLCI is in a state other than active(2) and is incapable of passing user traffic. | |
| 1.3.6.1.4.1.664.6.10000.70.29.1 | IdentityadGenFrameRelayMib | ADTRAN Generic Frame Relay Management Module |