ADTRAN-GENERIC-VECTORING-MIB
84 objects
ADTRAN Generic Vectoring MIB
Imported Objects
| ADTRAN-GENPORT-MIB | adGenPortTrapIdentifier |
| ADTRAN-GENSLOT-MIB | adGenSlotInfoIndex |
| ADTRAN-GENTRAPINFORM-MIB | adTrapInformSeqNum |
| ADTRAN-SHARED-CND-SYSTEM-MIB MISSING | adGenVector adGenVectorID |
| ADTRAN-TAeSCUEXT1-MIB | adTAeSCUTrapAlarmLevel |
| IF-MIB | ifIndex InterfaceIndex |
| SNMPv2-MIB | sysName |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.664.5.70.57.1 | NodeadGenVectorMIBObjects | |||
| 1.3.6.1.4.1.664.5.70.57.1.1 | TableadGenVectorModuleConfTable | not-accessible | current | This table contains global vectoring configuration parameters, per populated card slot. |
| 1.3.6.1.4.1.664.5.70.57.1.1.1 | RowadGenVectorModuleConfEntry | not-accessible | current | This list contains vector limits per module . |
| 1.3.6.1.4.1.664.5.70.57.1.1.1.1 | ColumnadGenVectorModuleConfSupportedVectorModeTypes | read-only | current | Indicates the vectoring modes in which the card is capable of participating. |
| 1.3.6.1.4.1.664.5.70.57.1.1.1.2 | ColumnadGenVectorModuleConfMaxBLVGroups | read-only | current | The maximum number of Board-Level vectoring groups the module can support. |
| 1.3.6.1.4.1.664.5.70.57.1.1.1.3 | ColumnadGenVectorModuleConfMaxSLVGroups | read-only | current | The maximum number of System-Level vectoring groups the module can support. |
| 1.3.6.1.4.1.664.5.70.57.1.1.1.4 | ColumnadGenVectorModuleConfMaxPhysPerSLVGroup | read-only | current | The maximum number of physical ports available per System-Level vectoring group. |
| 1.3.6.1.4.1.664.5.70.57.1.1.1.5 | ColumnadGenVectorModuleConfNumPhys | read-only | current | The number of physical ports available for vectoring on the given slot. |
| 1.3.6.1.4.1.664.5.70.57.1.1.1.6 | ColumnadGenVectorModuleConfVectorEngineHwRev | read-only | current | The hardware revision of the vectoring engine chip set. |
| 1.3.6.1.4.1.664.5.70.57.1.1.1.7 | ColumnadGenVectorModuleConfVectorEngineSwRev | read-only | current | The software revision of the vectoring engine chip set. |
| 1.3.6.1.4.1.664.5.70.57.1.2 | ScalaradGenVectorGroupTableLastError | read-only | current | Error status messages for group entities. |
| 1.3.6.1.4.1.664.5.70.57.1.3 | TableadGenVectorGroupTable | not-accessible | current | The Vectoring Group Table. A unique group is created for each unique set of physical ports that will be independently vectored. |
| 1.3.6.1.4.1.664.5.70.57.1.3.1 | RowadGenVectorGroupEntry | not-accessible | current | An entry in the Vectoring Group table. |
| 1.3.6.1.4.1.664.5.70.57.1.3.1.1 | ColumnadGenVectorGroupIfIndex | not-accessible | current | The ifIndex value of the interface associated with this Vectoring Group. The IANA type should be linegroup (210). |
| 1.3.6.1.4.1.664.5.70.57.1.3.1.2 | ColumnadGenVectorGroupDescription | read-create | current | The textual name given to this group. |
| 1.3.6.1.4.1.664.5.70.57.1.3.1.3 | ColumnadGenVectorGroupLastError | read-only | current | The string describing the last error experienced. |
| 1.3.6.1.4.1.664.5.70.57.1.3.1.4 | ColumnadGenVectorGroupBandPlan | read-create | current | |
| 1.3.6.1.4.1.664.5.70.57.1.3.1.5 | ColumnadGenVectorGroupRowStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. Setting this value to 'active' indicates that the vectoring group is… |
| 1.3.6.1.4.1.664.5.70.57.1.3.1.6 | ColumnadGenVectorGroupFallbackMode | read-create | current | |
| 1.3.6.1.4.1.664.5.70.57.1.3.1.7 | ColumnadGenVectorGroupFallbackAlarmSeverity | read-create | current | Sets the severity for adGenVectorAlarmsForcedFallbackAlarm. This severity applies to the entire group, which may span several slots. Valid options listed below… |
| 1.3.6.1.4.1.664.5.70.57.1.3.1.8 | ColumnadGenVectorGroupFallbackAlarmEnable | read-create | current | |
| 1.3.6.1.4.1.664.5.70.57.1.3.1.9 | ColumnadGenVectorGroupVectoringMode | read-create | current | |
| 1.3.6.1.4.1.664.5.70.57.1.3.1.10 | ColumnadGenVectorGroupAutoAddEnable | read-create | current | |
| 1.3.6.1.4.1.664.5.70.57.1.4 | ScalaradGenVectorPhyMapTableLastError | read-only | current | Error status messages for group to physical port mappings. |
| 1.3.6.1.4.1.664.5.70.57.1.5 | TableadGenVectorPhyMapTable | not-accessible | current | Row creation adds/maps the physical port to a vectoring group. |
| 1.3.6.1.4.1.664.5.70.57.1.5.1 | RowadGenVectorPhyMapEntry | not-accessible | current | An entry in the Phy Map table. This entry is represents one port that is associated with a vectoring group. |
| 1.3.6.1.4.1.664.5.70.57.1.5.1.1 | ColumnadGenVectorPhyMapGroupIfIndex | not-accessible | current | The ifIndex value of the vectoring group to which the physical port is mapped. |
| 1.3.6.1.4.1.664.5.70.57.1.5.1.2 | ColumnadGenVectorPhyMapPhyIfIndex | not-accessible | current | The ifIndex value of the physical port. |
| 1.3.6.1.4.1.664.5.70.57.1.5.1.3 | ColumnadGenVectorPhyMapLastChange | read-only | current | The value of sysUpTime at the time this Group-Phy mapping entered its current operational state. |
| 1.3.6.1.4.1.664.5.70.57.1.5.1.4 | ColumnadGenVectorPhyMapLastError | read-only | current | The string describing the last error experienced. |
| 1.3.6.1.4.1.664.5.70.57.1.5.1.5 | ColumnadGenVectorPhyMapRowStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. Creating a row adds the Phy to the Group. Setting this value to 'act… |
| 1.3.6.1.4.1.664.5.70.57.1.6 | TableadGenVectorGroupStatusTable | not-accessible | current | The Vectoring Group Status Table displays the status of each vectoring group. |
| 1.3.6.1.4.1.664.5.70.57.1.6.1 | RowadGenVectorGroupStatusEntry | not-accessible | current | An entry in the Vectoring Group table. |
| 1.3.6.1.4.1.664.5.70.57.1.6.1.1 | ColumnadGenVectorGroupStatusIfIndex | not-accessible | current | The ifIndex value of the interface associated with this Vectoring Group. The IANA type should be linegroup (210). |
| 1.3.6.1.4.1.664.5.70.57.1.6.1.2 | ColumnadGenVectorGroupStatusNumProvisionedPorts | read-only | current | The number of ports assigned to this vectoring group. |
| 1.3.6.1.4.1.664.5.70.57.1.6.1.3 | ColumnadGenVectorGroupStatusNumVectoredPorts | read-only | current | The number of ports assigned to this vectoring group that are trained and being vectored (g993.5). |
| 1.3.6.1.4.1.664.5.70.57.1.6.1.4 | ColumnadGenVectorGroupStatusNumUntrainedPorts | read-only | deprecated | The number of ports assigned to this vectoring group that are not currently trained. |
| 1.3.6.1.4.1.664.5.70.57.1.6.1.5 | ColumnadGenVectorGroupStatusNumVectorFriendlyPorts | read-only | current | The number of ports assigned to this vectoring group that are trained and are vectoring friendly (g993.2 annex y). |
| 1.3.6.1.4.1.664.5.70.57.1.6.1.6 | ColumnadGenVectorGroupStatusNumNonVectoredPorts | read-only | current | The number of ports assigned to this vectoring group that are trained and are not vectored. |
| 1.3.6.1.4.1.664.5.70.57.1.6.1.7 | ColumnadGenVectorGroupStatusNumLegacyPorts | read-only | current | The number of ports assigned to this vectoring group that are trained with a legacy VDSL2 modem that does not support vectoring. |
| 1.3.6.1.4.1.664.5.70.57.1.6.1.8 | ColumnadGenVectorGroupStatusOperStatus | read-only | current | The current operational status of the vectoring group. |
| 1.3.6.1.4.1.664.5.70.57.1.6.1.9 | ColumnadGenVectorGroupStatusReset | read-write | current | A SET clears the status information for each interface in the specified group. A GET will always return a one (1). |
| 1.3.6.1.4.1.664.5.70.57.1.6.1.10 | ColumnadGenVectorGroupStatusNumFallbackPorts | read-only | current | The number of ports assigned to this vectoring group that have been forced into the fallback mode specified by adGenVectorGroupFallbackMode. |
| 1.3.6.1.4.1.664.5.70.57.1.7 | TableadGenVectorPhyStatusTable | not-accessible | current | Displays the status of the available physical ports in the system, including the group, if any, a physical port is associated with. It also indicates the insta… |
| 1.3.6.1.4.1.664.5.70.57.1.7.1 | RowadGenVectorPhyStatusEntry | not-accessible | current | An entry in the Physical Port Status table. This entry represents one physical port. |
| 1.3.6.1.4.1.664.5.70.57.1.7.1.1 | ColumnadGenVectorPhyStatusPhyIfIndex | not-accessible | current | The ifIndex value of the physical link. IANA type is propVirtual(53). |
| 1.3.6.1.4.1.664.5.70.57.1.7.1.2 | ColumnadGenVectorPhyStatusGroupIfIndex | read-only | current | The ifIndex value of the Group of which this physical link belongs. A value of '0' indicates that the link is currently not mapped to any Group. IANA type is l… |
| 1.3.6.1.4.1.664.5.70.57.1.7.1.3 | ColumnadGenVectorPhyStatusGroupType | read-only | current | Indicates this physical port's vectoring group type, if any. |
| 1.3.6.1.4.1.664.5.70.57.1.7.1.4 | ColumnadGenVectorPhyStatusPortLineState | read-only | deprecated | The line state of the physical port. |
| 1.3.6.1.4.1.664.5.70.57.1.7.1.5 | ColumnadGenVectorPhyStatusPortVectoringState | read-only | current | The vectoring state of a physical port. The ff suffix designates vectoring friendly states. |
| 1.3.6.1.4.1.664.5.70.57.1.7.1.6 | ColumnadGenVectorPhyStatusVectoringError | read-only | current | The last error received in relation to the physical port. |
| 1.3.6.1.4.1.664.5.70.57.1.7.1.7 | ColumnadGenVectorPhyStatusVectoringErrorTimestamp | read-only | current | The card uptime when the last physical port error occurred. If no error has occurred, this value will be zero. |
| 1.3.6.1.4.1.664.5.70.57.1.7.1.8 | ColumnadGenVectorPhyStatusVectoringErrorDateTime | read-only | current | Date/time string in format yyyy.MM.dd HH:mm of the last physical port error. If no error has occurred, the value will be N/A. |
| 1.3.6.1.4.1.664.5.70.57.1.8 | NodeadGenVectorAlarmsPrefix | |||
| 1.3.6.1.4.1.664.5.70.57.1.8.0 | NodeadGenVectorAlarms | |||
| 1.3.6.1.4.1.664.5.70.57.1.8.0.2 | NotificationadGenVectorAlarmsForcedFallbackClr | current | Forced Fallback - Cleared. All ports on this slot have resumed the non-forced fallback provisioning state. | |
| 1.3.6.1.4.1.664.5.70.57.1.8.0.3 | NotificationadGenVectorAlarmsForcedFallbackAct | current | Forced Fallback - Active. All ports on this slot have been placed in the forced fallback provisioning state set by adGenVectorGroupFallbackMode. | |
| 1.3.6.1.4.1.664.5.70.57.1.9 | TableadGenVectorSlotConfTable | not-accessible | current | Table contains slot based vectoring configuration items |
| 1.3.6.1.4.1.664.5.70.57.1.9.1 | RowadGenVectorSlotConfEntry | not-accessible | current | Each entry can be applied per vectored slot. |
| 1.3.6.1.4.1.664.5.70.57.1.9.1.1 | ColumnadGenVectorSlotConfForceFallback | read-write | current | Used to manually force slot into or out of vectoring fallback mode. A read will always return allowVectoring (2) |
| 1.3.6.1.4.1.664.5.70.57.1.10 | TableadGenVectorSlotStatusTable | not-accessible | current | Table contains slot based vectoring status items |
| 1.3.6.1.4.1.664.5.70.57.1.10.1 | RowadGenVectorSlotStatusEntry | not-accessible | current | Each entry can be read per vectored slot |
| 1.3.6.1.4.1.664.5.70.57.1.10.1.1 | ColumnadGenVectorSlotStatusFallbackState | read-only | current | Used to query the slot fallback state. |
| 1.3.6.1.4.1.664.5.70.57.2 | NodeadGenVectorBulk | |||
| 1.3.6.1.4.1.664.5.70.57.2.1 | TableadGenVectorBulkInstanceTable | not-accessible | current | Table contains instances that are created when there is a request to reserve a bulk vector instance |
| 1.3.6.1.4.1.664.5.70.57.2.1.1 | RowadGenVectorBulkInstanceEntry | not-accessible | current | Index is the slot number. |
| 1.3.6.1.4.1.664.5.70.57.2.1.1.1 | ColumnadGenVectorBulkReserveSlotInstance | read-only | current | Used to index the TLV table; Each time this is called by slot it creates an instance for that viewer. Once an instance is created, it may be found by doing a g… |
| 1.3.6.1.4.1.664.5.70.57.2.2 | TableadGenVectorBulkFilterTable | not-accessible | current | Table contains filters that can be applied on the requested instance |
| 1.3.6.1.4.1.664.5.70.57.2.2.1 | RowadGenVectorBulkFilterEntry | not-accessible | current | Indexes are the vector group status index and instance number |
| 1.3.6.1.4.1.664.5.70.57.2.2.1.1 | ColumnadGenVectorBulkFilterInstance | not-accessible | current | Used to index the table by TLV Instance number. |
| 1.3.6.1.4.1.664.5.70.57.2.2.1.2 | ColumnadGenVectorBulkFilterInterface | read-write | current | Used to set the vector group filter for a specific bulk vector instance of the Tlv table. The interface ID passed here will be the SNMP interface ID. |
| 1.3.6.1.4.1.664.5.70.57.2.2.1.3 | ColumnadGenVectorBulkFilterSlot | read-write | current | Used to set the slot of bulk vector info to return in the bulk vector instance |
| 1.3.6.1.4.1.664.5.70.57.2.2.1.4 | ColumnadGenVectorBulkFilterDirection | read-write | current | Used to set the direction of bulk vector info to return in the bulk vector instance: 1 - Upstream Direction, 2 - Downstream direction |
| 1.3.6.1.4.1.664.5.70.57.2.2.1.5 | ColumnadGenVectorBulkFilterType | read-write | current | Used to set the type of bulk vector info to return in the bulk vector instance: 1 - weights |
| 1.3.6.1.4.1.664.5.70.57.2.2.1.6 | ColumnadGenVectorBulkSlotCreate | read-write | current | Set this OID to 1 to update the instance with bulk vector info depending on filters. A get on this OID always returns a 1. |
| 1.3.6.1.4.1.664.6.10000.70.57.1 | IdentityadGenVectorMIB | ADTRAN Generic Vectoring MIB |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AdGenVectorGroupBandPlans | INTEGER { g998 (1), g998e (2), g998ade (3), g997 (4), g997e (5), hpe (6) } | current | These are the superset band plans for a vectoring group. An individual port in the vectoring group must be a subset of the group's band plan. |
| AdGenVectorGroupFallbackModes | INTEGER { adsl2-multimode (1), shutdown (2), adsl2 (3), non-vectored (4) } | current | Vectoring group fallback modes determine port behavior during misconfiguration and system failure events. |
| AdGenVectorGroupOperStatus | INTEGER { up (1), down (2), upPartial (3) } | current | The value determines the operational status of a vectoring group. A vectoring group consists of one resource slot controlling one or more target slots. The value up indicates that all target slots are being successfully… |
| AdGenVectorLastChange | TimeTicks | current | The value of MIB II's sysUpTime at the time a vectoring object entered its current operational state. If the current state was entered prior to the last re-initialization of the agent then this object contains a zero va… |
| AdGenVectorMode | INTEGER { blv (1), slv (2), both (3), none (4), dlv (5), blv-dlv-slv (7) } | current | Specifies the vectoring mode of a particular group or the vectoring mode capabilities of a slot. |
| AdGenVectorPhyLineState | INTEGER { notAvailable (0), down (1), train (2), up (3), deltActive (4), deltDataExchange (5), deltDataRequest (6), deltComplete (7), seltActive (8), seltDataRequest (9), seltComplete (10) } | current | The value determines the line state of a physical port. |
| AdGenVectorPhyPortErrorTimestamp | TimeTicks | current | The card's uptime in seconds when a port in a vectoring group experienced a vectoring error. If the port has no uncleared errors then this object contains a zero value. |
| AdGenVectorPhyPortVectoringState | INTEGER { idle (0), dsInit-1-0 (1), dsInit-2-1 (2), usInit-1 (3), usInit-2 (4), steady (5), trans (6), waitForStart (7), dsInit-1-1 (8), dsInit-2-0 (9), reset (10), nonVectoring (11), handshake (12), waitForStart-Legacy (13), init-Legacy (14), steady-Legacy (15), steadyB (16), stopPending (17), idle-FF (18), dsInit-1-0-ff (19), dsInit-2-1-ff (20), usInit-1-ff (21), usInit-2-ff (22), steady-ff (23), trans-ff (24), waitForStart-ff (25), dsInit-1-1-ff (26), dsInit-2-0-ff (27), steadyB-ff (28), stopPending-ff (29), unknown (30), fallback (31) } | current | The value determines the vectoring state of a physical port. The ff suffix designates vectoring friendly states. The Legacy suffix designates states for modems without vectoring support. |