ADTRAN-GENIPSERVICES-MIB
97 objects
The is the MIB module that describes IP Services SMIv2 objects.
Imported Objects
| ADTRAN-GENSLOT-MIB | adGenSlotInfoIndex |
| ADTRAN-MIB | -- adMgmt adIdentityShared -- adProducts |
| ATM-TC-MIB | AtmVcIdentifier AtmVpIdentifier |
| IANAifType-MIB | -- IANAifType -- |
| IF-MIB | -- InterfaceIndex ifIndex -- InterfaceIndexOrZero |
| SNMP-FRAMEWORK-MIB | -- SnmpAdminString -- |
| SNMPv2-SMI | -- Counter64 -- Gauge32 -- TimeTicks -- Unsigned32 Counter32 IMPORTS MODULE-IDENTITY Integer32 IpAddress OBJECT-TYPE |
| SNMPv2-TC | -- MacAddress -- TimeInterval DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.664.6.10000.62 | IdentityadGenCndIP | The is the MIB module that describes IP Services SMIv2 objects. | ||
| 1.3.6.1.4.1.664.6.10000.62.1 | NodeadGenIpConfig | |||
| 1.3.6.1.4.1.664.6.10000.62.2 | NodeadGenIpProv | |||
| 1.3.6.1.4.1.664.6.10000.62.2.1 | TableadGenIpVlanVcMapProfileTable | not-accessible | current | This table contains information on the VLAN mappings in an ATM-oriented system (i.e., 'cross-connects' between VLANs and VCLs). One entry in this table reflect… |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1 | RowadGenIpVlanVcMapProfileEntry | not-accessible | current | Each entry corresponds to an Ethernet/VLAN-to-VCL Mapping Profile. The ifIndex used here is the GigE ifIndex associated with the DSL port of interest. |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.1 | ColumnadGenIpVlanVcVpi | not-accessible | current | VPI for the VCL that is being mapped. May be the same as atmVclVpi from atmVclTable in the ATM-MIB. The current line of thought is that adGenIpVpi should NOT b… |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.2 | ColumnadGenIpVlanVcVci | not-accessible | current | VCI for the VCL that is being mapped. May be the same as atmVclVci from atmVclTable in the ATM-MIB. The current line of thought is that adGenIpVci should NOT b… |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.3 | ColumnadGenIpVlanVcVID | not-accessible | current | VLAN ID for the VLAN that is being mapped (see indexes above). This VLAN ID is in the range (1..4095), and it is associated with the 'S-tag'. If traffic is unt… |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.4 | ColumnadGenIpVlanVcMapProfileName | read-create | current | This object is provided so that the user can identify the characteristics of the mapping between the specified VLAN and VCL. The profile will be stored in the … |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.5 | ColumnadGenIpVlanVcEncapsMode | read-create | current | Encapsulation mode/type if applicable; 'notApplicable' otherwise. Note: pppoa(2) is for PPPoA LLC. |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.6 | ColumnadGenIpVlanVcPBits | read-create | current | Priority bits, 0-7, where 0 is the highest priority. This priority is associated with adGenIpVlanVcVID (the S-tag) defined above. A value of 8 means inherit pr… |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.7 | ColumnadGenIpVlanVcManualAddrAging | read-create | current | Manual Address Aging in minutes for PPPoE and DHCP. |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.8 | ColumnadGenIpVlanVcPPPoERelay | read-create | deprecated | Enable/disable PPPoE Relay if applicable; 'notApplicable' otherwise. This object is deprecated and will be obsoleted in a future version of this mib. |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.9 | ColumnadGenIpVlanVcIntermedAgent | read-create | current | Enable/disable Intermediate Agent if applicable; 'notApplicable' otherwise. |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.10 | ColumnadGenIpVlanVcDhcpRelay | read-create | current | Enable/disable DHCP Relay if applicable; 'notApplicable' otherwise. |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.11 | ColumnadGenIpVlanVcOption82Insert | read-create | current | Enable/disable Option 82 Insertion if applicable; 'notApplicable' otherwise. |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.12 | ColumnadGenIpVlanVcLearnedIpAddrAgingMethod | read-create | current | Method for Learned IP Address Aging if applicable; 'notApplicable' otherwise. |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.13 | ColumnadGenIpVlanVcIgmpProcessing | read-create | current | Method for IGMP Processing if applicable; 'notApplicable' otherwise. |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.14 | ColumnadGenIpVlanVcIgmpVersion | read-create | current | IGMP Version if applicable: v3 implies v1, v2, and v3; v2 implies v1 and v2; v1 is v1 only; 'notApplicable' otherwise. |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.15 | ColumnadGenIpVlanVcLastMemberQueryInterval | read-create | current | Last Member Query Interval in milliseconds. This is the amount of time between Queries. Low value results in faster detection of missed leaves. |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.16 | ColumnadGenIpVlanVcLastMemberQueryCount | read-create | current | Last Member Query Count. This is the number of queries before declaring no membership of a group (channel). Setting to 0 is the equivalent of setting Immediate… |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.17 | ColumnadGenIpVlanVcImmediateLeave | read-create | current | Enable/disable Immediate Leave if applicable; 'notApplicable' otherwise. Disable is the equivalent of setting Last Member Query Count to 0. |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.18 | ColumnadGenIpVlanVcMaxAllowedMcastSessions | read-create | current | Maximum Allowed Multicast Sessions. |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.19 | ColumnadGenIpVlanVcL2L4Classifier | read-create | current | Layer 2 - Layer 4 Classifier to be used; 'notApplicable' otherwise. |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.20 | ColumnadGenIpVlanVcL2L4Value | read-create | current | Layer 2 - Layer 4 Value; should be displayed in hexadecimal format. |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.21 | ColumnadGenIpVlanVcMapProfileRowStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. This object will most likely be used to represent .......... |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.22 | ColumnadGenIpVlanVcDhcpTrustedInterface | read-create | current | trusted/untrusted interface for DHCP Relay if applicable. |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.23 | ColumnadGenIpVlanVcDhcpPPPoERemoteId | read-create | current | Enable/disable Remote ID insertion into DHCP Option 82 or PPPoE Vendor Specific tag if applicable. |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.24 | ColumnadGenIpVlanVcDhcpPPPoELoopCharacteristics | read-create | current | Enable/disable loop characteristics insertion into DHCP Option 82 or PPPoE Vendor Specific tag if applicable. |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.25 | ColumnadGenIpVlanVcDhcpPPPoECircuitIdFormat | read-create | current | Used to provision the format of the circuit ID string. This string is returned by the PPPoE intermediate agent and DHCP relay agent in sub option 1. TR-101 sta… |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.26 | ColumnadGenIpVlanVcPPPoASessionTimeout | read-create | current | Used to set the PPPoA Session timeout when the mapping is provisioned for PPPoA encapsulation. |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.27 | ColumnadGenIpVlanVcCtagVID | read-create | current | This VLAN ID is in the range (1..4095), and it is associated with the 'C-tag'. If traffic is untagged, this value MUST be 4095, and adGenIpVlanVcVID (defined a… |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.28 | ColumnadGenIpVlanVcCtagPbitsMethod | read-create | current | Method to be used to determine the Priority Bits value for the C-tag if applicable. If the C-tag (adGenIpVlanVcCtagVID defined above for double-tagged traffic)… |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.29 | ColumnadGenIpVlanVcCtagPbitsValue | read-create | current | Priority bits, 0-7, where 0 is the highest priority. This priority is associated with adGenIpVlanVcCtagVID (the C-tag) defined above. |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.30 | ColumnadGenIpVlanVcMulticastVlanVID | read-create | current | Used to set which VID carries multicast (IGMP) traffic. If set to 4095, the separate multicast Vlan VID is disabled. |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.31 | ColumnadGenIpVlanVcMulticastVlanUpstreamPriority | read-create | current | Used to set the multicast upstream vlan priority. |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.32 | ColumnadGenIpVlanVcMulticastDownstreamVlanVID | read-create | current | Used to set the downstream VLAN ID. If set to 4095, the downstream VID is disabled. |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.33 | ColumnadGenIpVlanVcDownstreamPolicer | read-create | current | Enable/disable Downstream Policer if applicable; 'notApplicable' otherwise. |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.34 | ColumnadGenIpVlanVcDownstreamPolicerCIR | read-create | current | Used to set the Downstream Policer Committed Information Rate (CIR) in bps. Not applicable if the Downstream Policer is disabled. |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.35 | ColumnadGenIpVlanVcDownstreamPolicerCBS | read-create | current | Used to set the Downstream Policer Committed Burst Size (CBS) in bits. Not applicable if the Downstream Policer is disabled. |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.36 | ColumnadGenIpVlanVcDownstreamPolicerEIR | read-create | current | Used to set the Downstream Policer Excess Information Rate (EIR) in bps. Not applicable if the Downstream Policer is disabled. |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.37 | ColumnadGenIpVlanVcDownstreamPolicerEBS | read-create | current | Used to set the Downstream Policer Excess Burst Size (EBS) in bits. Not applicable if the Downstream Policer is disabled. |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.38 | ColumnadGenIpVlanVcUpstreamPolicer | read-create | current | Enable/disable Upstream Policer if applicable; 'notApplicable' otherwise. |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.39 | ColumnadGenIpVlanVcUpstreamPolicerCIR | read-create | current | Used to set the Upstream Policer Committed Information Rate (CIR) in bps. Not applicable if the Upstream Policer is disabled. |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.40 | ColumnadGenIpVlanVcUpstreamPolicerCBS | read-create | current | Used to set the Upstream Policer Committed Burst Size (CBS) in bits. Not applicable if the Upstream Policer is disabled. |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.41 | ColumnadGenIpVlanVcUpstreamPolicerEIR | read-create | current | Used to set the Upstream Policer Excess Information Rate (EIR) in bps. Not applicable if the Upstream Policer is disabled. |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.42 | ColumnadGenIpVlanVcUpstreamPolicerEBS | read-create | current | Used to set the Upstream Policer Excess Burst Size (EBS) in bits. Not applicable if the Upstream Policer is disabled. |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.43 | ColumnadGenIpVlanVcMCastSessionControlStartIP | read-create | current | The first Multicast IP Address in a range of IP addresses that are used by the Multicast Session Control. |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.44 | ColumnadGenIpVlanVcMCastSessionControlEndIP | read-create | current | The last Multicast IP Address in a range of IP addresses that are used by the Multicast Session Control. |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.45 | ColumnadGenIpVlanVcMCastSessionControlBitrate | read-create | current | Used to set the bitrate associated with the multicast IP address range of the Multicast Session Control. |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.46 | ColumnadGenIpVlanVcPolicerStatus | read-create | current | String description of the error that occurred as a result of the last set to adGenIpVlanVcDownstreamPolicer or adGenIpVlanVcUpstreamPolicer. |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.47 | ColumnadGenIpVlanVcUpstreamMACDAFilter | read-create | current | This item defines how upstream traffic is filtered on MAC DA. gatewayMACOnly - indicates that upstream traffic is forwarded to the network only if uses the gat… |
| 1.3.6.1.4.1.664.6.10000.62.2.1.1.48 | ColumnadGenIpVlanVcIgmpRouterIP | read-create | current | The source IP address that the DSLAM places in IGMP messages destined for the subscriber. This value only applies when IGMP is in proxy mode. |
| 1.3.6.1.4.1.664.6.10000.62.2.2 | TableadGenIpPortProfileTable | not-accessible | current | This table contains information on the port profiles. One entry in this table reflects a profile defined by a manager which can be used to provision a port for… |
| 1.3.6.1.4.1.664.6.10000.62.2.2.1 | RowadGenIpPortProfileEntry | not-accessible | current | Each entry corresponds to a Port Profile. The ifIndex used here is the GigE ifIndex associated with the DSL/customer port of interest. |
| 1.3.6.1.4.1.664.6.10000.62.2.2.1.1 | ColumnadGenIpPortProfileName | read-create | current | This object is provided to assist the user in identifying the characteristics of the port profile by name. The profile will be stored in the EMS by name and ap… |
| 1.3.6.1.4.1.664.6.10000.62.2.2.1.2 | ColumnadGenIpPortNetTrafficTags | read-create | current | Network Traffic Tagging options. Note: no tags for flat network . |
| 1.3.6.1.4.1.664.6.10000.62.2.2.1.3 | ColumnadGenIpPortNetworkModel | read-create | current | This is the Network Model, also referred to as VC/VLAN Classification. |
| 1.3.6.1.4.1.664.6.10000.62.2.2.1.4 | ColumnadGenIpPortSTagVID | read-create | current | S-Tag VLAN ID in the range (1..4094). |
| 1.3.6.1.4.1.664.6.10000.62.2.2.1.5 | ColumnadGenIpPortSTagPBitsMethod | read-create | current | S-Tag Priority Bits Method. If 'specifyFixedValue' is to be used, see also adGenIpSTagPBitsValue. |
| 1.3.6.1.4.1.664.6.10000.62.2.2.1.6 | ColumnadGenIpPortSTagPBitsValue | read-create | current | S-Tag Priority Bits Value if 'specifyFixedValue' is to be used. See also adGenIpSTagPBitsMethod. Priority bits range is 0-7, where 0 is the highest priority. |
| 1.3.6.1.4.1.664.6.10000.62.2.2.1.7 | ColumnadGenIpPortMaxMacAddr | read-create | current | The total (maximum) number of Learned/Dynamic MAC addresses plus Learned-and-Locked MAC addresses. |
| 1.3.6.1.4.1.664.6.10000.62.2.2.1.8 | ColumnadGenIpPortLearnAndLockAddr | read-create | current | Enable/disable Learn-and-Lock feature for MAC addresses. If 'disabled' is set, then Learned/Dynamic method is implied. |
| 1.3.6.1.4.1.664.6.10000.62.2.2.1.9 | ColumnadGenIpPortIgmpLimit | read-create | current | IGMP Limit in frames/sec. |
| 1.3.6.1.4.1.664.6.10000.62.2.2.1.10 | ColumnadGenIpPortIgmpLockout | read-create | current | IGMP Violation Lockout in minutes. |
| 1.3.6.1.4.1.664.6.10000.62.2.2.1.11 | ColumnadGenIpPortArpLimit | read-create | current | ARP Limit in frames/sec. |
| 1.3.6.1.4.1.664.6.10000.62.2.2.1.12 | ColumnadGenIpPortArpLockout | read-create | current | ARP Violation Lockout in minutes. |
| 1.3.6.1.4.1.664.6.10000.62.2.2.1.13 | ColumnadGenIpPortDhcpLimit | read-create | current | DHCP Limit in frames/sec. |
| 1.3.6.1.4.1.664.6.10000.62.2.2.1.14 | ColumnadGenIpPortDhcpLockout | read-create | current | DHCP Lockout in minutes. |
| 1.3.6.1.4.1.664.6.10000.62.2.2.1.15 | ColumnadGenIpPortPppoeLimit | read-create | current | PPPoE Limit in frames/sec. |
| 1.3.6.1.4.1.664.6.10000.62.2.2.1.16 | ColumnadGenIpPortPppoeLockout | read-create | current | PPPoE Lockout in minutes. |
| 1.3.6.1.4.1.664.6.10000.62.2.2.1.17 | ColumnadGenIpPortMcastBcastLimit | read-create | current | Multicast/Broadcast Limit in frames/sec. |
| 1.3.6.1.4.1.664.6.10000.62.2.2.1.18 | ColumnadGenIpPortMcastBcastLockout | read-create | current | Multicast/Broadcast Violation Lockout in minutes. |
| 1.3.6.1.4.1.664.6.10000.62.2.2.1.19 | ColumnadGenIpPortUcastExceptionLimit | read-create | current | Unicast Exception Limit in frames/sec. |
| 1.3.6.1.4.1.664.6.10000.62.2.2.1.20 | ColumnadGenIpPortUcastExceptionLockout | read-create | current | Unicast Exception Violation Lockout in minutes. |
| 1.3.6.1.4.1.664.6.10000.62.2.2.1.21 | ColumnadGenIpPortProfileRowStatus | read-create | current | This type of object is normally used to create a new row or modify or delete an existing row in the table with which it is associated. A profile is activated b… |
| 1.3.6.1.4.1.664.6.10000.62.2.4 | TableadGenIpVlanPropertiesTable | not-accessible | current | This table contains information on properties, such as name, of the specified VLAN. |
| 1.3.6.1.4.1.664.6.10000.62.2.4.1 | RowadGenIpVlanPropertiesEntry | not-accessible | current | The index used is the VID of the VLAN of interest. |
| 1.3.6.1.4.1.664.6.10000.62.2.4.1.1 | ColumnadGenIpVlanPropName | read-write | current | Name associated with the specified VLAN. |
| 1.3.6.1.4.1.664.6.10000.62.2.5 | TableadGenIpSysProvTable | not-accessible | current | This table contains provisioning variables for the system. |
| 1.3.6.1.4.1.664.6.10000.62.2.5.1 | RowadGenIpSysProvEntry | not-accessible | current | The index used is the slot number of the active switch module. |
| 1.3.6.1.4.1.664.6.10000.62.2.5.1.1 | ColumnadGenIpSysProvMgmtVID | read-create | current | The Management VLAN ID for this system. The index is the slot number of the switch module. Management VID = 0 implies no tagging; however, also see adGenIpSysM… |
| 1.3.6.1.4.1.664.6.10000.62.2.5.1.2 | ColumnadGenIpSysProvMgmtTagEnable | read-create | current | Enable/disable the switch module to receive and transmit tagged (as opposed to untagged) traffic on the Management VLAN. |
| 1.3.6.1.4.1.664.6.10000.62.2.5.1.3 | ColumnadGenIpSysProvMgmtPBits | read-create | current | Priority bits, 0-7, where 0 is the highest priority. |
| 1.3.6.1.4.1.664.6.10000.62.2.5.1.5 | ColumnadGenIpSysProvMacAgingTimeout | read-create | current | Time limit (in seconds) for keeping MAC addresses while in MAC aging mode. If this limit is set to zero, the mode of operation is learn-and-lock. |
| 1.3.6.1.4.1.664.6.10000.62.2.5.1.6 | ColumnadGenIpSysProvIgmpVID | read-create | current | The IGMP VLAN ID for this system. The index is the slot number of the switch module. IGMP VID = 0 implies no tagging; however, also see adGenIpSysIgmpTagEnable… |
| 1.3.6.1.4.1.664.6.10000.62.2.5.1.7 | ColumnadGenIpSysProvIgmpTagEnable | read-create | current | Enable/disable the switch module to receive and transmit tagged (as opposed to untagged) traffic on the IGMP VLAN. |
| 1.3.6.1.4.1.664.6.10000.62.2.5.1.8 | ColumnadGenIpSysProvIgmpPBits | read-create | current | Priority bits, 0-7, where 0 is the highest priority. |
| 1.3.6.1.4.1.664.6.10000.62.2.5.1.9 | ColumnadGenIpSysProvIgmpHostIP | read-create | current | The IGMP Host IP address for this system. The index is the slot number of the switch module. |
| 1.3.6.1.4.1.664.6.10000.62.2.6 | TableadGenIpVlanAndPortProvTable | not-accessible | current | This table contains provisioning (row status) for VLAN membership. |
| 1.3.6.1.4.1.664.6.10000.62.2.6.1 | RowadGenIpVlanAndPortProvEntry | not-accessible | current | ... |
| 1.3.6.1.4.1.664.6.10000.62.2.6.1.1 | ColumnadGenIpAccessPortVlanMemRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. This object, by the definition of its indexes, represents the mem… |
| 1.3.6.1.4.1.664.6.10000.62.3 | NodeadGenIpStatus | |||
| 1.3.6.1.4.1.664.6.10000.62.3.2 | TableadGenIpVlanAndPortStatusTable | not-accessible | current | This table contains status information on VLAN membership. |
| 1.3.6.1.4.1.664.6.10000.62.3.2.1 | RowadGenIpVlanAndPortStatusEntry | not-accessible | current | ... |
| 1.3.6.1.4.1.664.6.10000.62.3.2.1.2 | ColumnadGenIpConfVlanMapping | read-only | current | This variable is indexed by the ifIndex of the GigE port on the 'backplane' of the card (e.g., the TA1148, the TA5000 ADSL card, etc.) and the VID of interest.… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| VlanId | INTEGER (1..4095) | current | A 12-bit VLAN ID used in the VLAN Tag header. |