MIB Viewer

ADTRAN-TA5K-SM-MIB

157 objects
Total Access 5000 SwitchModule 1187020L1 MIB
Imported Objects
ADTRAN-GENPORT-MIBadGenPortTrapIdentifier
ADTRAN-GENSLOT-MIBadGenSlotInfoIndex
ADTRAN-GENTRAPINFORM-MIBadTrapInformSeqNum
ADTRAN-MIBadIdentity adMgmt adProducts
ADTRAN-TAeSCUEXT1-MIBadTAeSCUTrapAlarmLevel
IANAifType-MIB-- IANAifType --
IF-MIBifDescr ifIndex InterfaceIndexOrZero -- InterfaceIndex
SNMP-FRAMEWORK-MIB-- SnmpAdminString --
SNMPv2-MIBsysName
SNMPv2-SMI-- Counter64 -- Gauge32 -- TimeTicks -- Unsigned32 Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
SNMPv2-TC-- TimeInterval DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.664.1.750NodeadTa5kSmTraps
1.3.6.1.4.1.664.1.750.0NodeadTa5kSmAlarms
1.3.6.1.4.1.664.1.750.0.2NotificationadTa5kSmTimingSrcCleardeprecatedIndicates that the primary and/or secondary timing source alarm has cleared
1.3.6.1.4.1.664.1.750.0.3NotificationadTa5kSmTimingSrcFaildeprecatedIndicates that the primary and/or secondary timing source has failed
1.3.6.1.4.1.664.1.750.0.4NotificationadTa5kSmRingGenClearcurrentIndicates ring generator alarm clear
1.3.6.1.4.1.664.1.750.0.5NotificationadTa5kSmRingGenFailcurrentIndicates that the ring generator has failed
1.3.6.1.4.1.664.1.750.0.6NotificationadTa5kSmPowerLimitAlmClearcurrentIndicates that the power limit alarm has cleared
1.3.6.1.4.1.664.1.750.0.7NotificationadTa5kSmPowerLimitExceededcurrentIndicates that the shelf power limit has been exceeded
1.3.6.1.4.1.664.1.750.0.8NotificationadTa5kSmUnknownSfpClearcurrentIndicates that the unknown SFP alarm has cleared
1.3.6.1.4.1.664.1.750.0.9NotificationadTa5kSmUnknownSfpAlarmcurrentIndicates that the unknown SFP alarm is active
1.3.6.1.4.1.664.1.750.0.10NotificationadTa5kSmSfpFaultClearcurrentIndicates that the SFP fault has cleared
1.3.6.1.4.1.664.1.750.0.11NotificationadTa5kSmSfpFaultActivecurrentIndicates that the SFP fault is active
1.3.6.1.4.1.664.1.750.0.12NotificationadTa5kSmMultipleUplinksCleardeprecatedIndicates that the multiple uplink alarm has cleared
1.3.6.1.4.1.664.1.750.0.13NotificationadTa5kSmMultipleUplinksDetecteddeprecatedIndicates that multiple uplinks have been detected
1.3.6.1.4.1.664.1.750.0.14NotificationadTa5kSmExtAFailureClearcurrentIndicates that the ExtA timing failure has been cleared
1.3.6.1.4.1.664.1.750.0.15NotificationadTa5kSmExtAFailureActivecurrentIndicates that the ExtA timing has failed
1.3.6.1.4.1.664.1.750.0.16NotificationadTa5kSmExtBFailureClearcurrentIndicates that the ExtB timing failure has been cleared
1.3.6.1.4.1.664.1.750.0.17NotificationadTa5kSmExtBFailureActivecurrentIndicates that the ExtA timing has failed
1.3.6.1.4.1.664.1.750.0.18NotificationadTa5kSmLossOfHeartbeatClearcurrentIndicates that the loss of heartbeat alarm cleared
1.3.6.1.4.1.664.1.750.0.19NotificationadTa5kSmLossOfHeartbeatActivecurrentIndicates that the loss of heartbeat alarm is active
1.3.6.1.4.1.664.1.750.0.20NotificationadTa5kSmLossOfNetworkStpCleardeprecatedIndicates that the loss of network STP alarm cleared
1.3.6.1.4.1.664.1.750.0.21NotificationadTa5kSmLossOfNetworkStpActivedeprecatedIndicates that the loss of network STP alarm active
1.3.6.1.4.1.664.1.750.0.22NotificationadTa5kSmDuplicateNodeClearcurrentIndicates that the duplicate node alarm has been cleared
1.3.6.1.4.1.664.1.750.0.23NotificationadTa5kSmDuplicateNodeActivecurrentIndicates that the duplicate node alarm is active
1.3.6.1.4.1.664.1.750.0.24NotificationadTa5kSmDuplicateScmIpClearcurrentIndicates that the duplicate SCM IP address alarm has been cleared
1.3.6.1.4.1.664.1.750.0.25NotificationadTa5kSmDuplicateScmIpActivecurrentIndicates that the duplicate SCM IP address alarm is active
1.3.6.1.4.1.664.1.750.0.26NotificationadTa5kSmBandwidthFullClearcurrentIndicates that the Bandwidth full alarm has been cleared
1.3.6.1.4.1.664.1.750.0.27NotificationadTa5kSmBandwidthFullcurrentIndicates that the Bandwidth full alarm is active
1.3.6.1.4.1.664.1.750.0.28NotificationadTa5kSmPriTimingSrcCleardeprecatedIndicates that the primary timing source alarm has cleared
1.3.6.1.4.1.664.1.750.0.29NotificationadTa5kSmPriTimingSrcFaildeprecatedIndicates that the primary timing source has failed
1.3.6.1.4.1.664.1.750.0.30NotificationadTa5kSmSecTimingSrcCleardeprecatedIndicates that the secondary timing source alarm has cleared
1.3.6.1.4.1.664.1.750.0.31NotificationadTa5kSmSecTimingSrcFaildeprecatedIndicates that the secondary timing source has failed
1.3.6.1.4.1.664.1.750.0.32NotificationadTa5kSmNodeNumberProvClearcurrentIndicates that the shelf's node number has been provisioned and is not zero.
1.3.6.1.4.1.664.1.750.0.33NotificationadTa5kSmNodeNumberDefaultcurrentIndicates that the shelf's node number has not been provisioned.
1.3.6.1.4.1.664.1.750.0.34NotificationadTa5kSmMgmtVlanFailClearcurrentIndicates that the SM's failure to communicate the Internal Management VLAN to an access module has cleared.
1.3.6.1.4.1.664.1.750.0.35NotificationadTa5kSmMgmtVlanFailcurrentIndicates that the SM has failed to communicate the Internal Management VLAN to an access module.
1.3.6.1.4.1.664.1.750.0.36NotificationadTa5kSmioMismatchClearcurrentIndicates that either there is no hardware incompatibility among the SM cards and SMIO Or ERPS/CSLAG is not provisioned.
1.3.6.1.4.1.664.1.750.0.37NotificationadTa5kSmioMismatchcurrentIndicates that attempts for provisioning of ERPS or CSLAG is made and hardware incompatibility detected among SM and SMIO
1.3.6.1.4.1.664.1.750.0.38NotificationadTa5kSmBackPlaneRateFallbackClearcurrentIndicates that the AM is out of Backplane Rate Fallback mode. adGenSlotInfoIndex indicates the slot of the card sending the alarm, which is always the active S…
1.3.6.1.4.1.664.1.750.0.39NotificationadTa5kSmBackPlaneRateFallbackcurrentIndicates that the AM is in Backplane Rate Fallback mode. adGenSlotInfoIndex indicates the slot of the card sending the alarm, which is always the active SM. i…
1.3.6.1.4.1.664.1.750.0.40NotificationadTa5kSmPeerLinkDownClearcurrentIndicates that the link status of the high speed peer interface between redundant switch modules is up. ifIndex indicates the associated peer port interface
1.3.6.1.4.1.664.1.750.0.41NotificationadTa5kSmPeerLinkDowncurrentIndicates that the link status of the high speed peer interface between redundant switch modules is down. ifIndex indicates the associated peer port interface
1.3.6.1.4.1.664.1.750.0.42NotificationadTa5kSmBackPlaneIncompatibleClearcurrentIndicates that the Backplane Incompatible alarm has been cleared.
1.3.6.1.4.1.664.1.750.0.43NotificationadTa5kSmBackPlaneIncompatibleActivecurrentIndicates that SM cards are not capable of full backplane speeds to some slots in the chassis.
1.3.6.1.4.1.664.2.750NodeadTa5kSm
1.3.6.1.4.1.664.2.750.1NodeadTa5kSmConfig
1.3.6.1.4.1.664.2.750.1.1TableadTa5kSmSystemTablenot-accessiblecurrent...
1.3.6.1.4.1.664.2.750.1.1.1RowadTa5kSmSystemEntrynot-accessiblecurrent...
1.3.6.1.4.1.664.2.750.1.1.1.1ColumnadTa5kSmMaxNodesread-onlycurrentThe max number of nodes supported in a topology of TA5000's. Value returned is only valid at the COT.
1.3.6.1.4.1.664.2.750.1.1.1.2ColumnadTa5kSmMaxShelvesread-onlycurrentThe max number of expansion shelves supported. Value returned is only valid at the COT.
1.3.6.1.4.1.664.2.750.1.1.1.3ColumnadTa5kSmBootRevread-writecurrentDisplays the boot revision
1.3.6.1.4.1.664.2.750.1.1.1.4ColumnadTa5kSmNet1SFPDescriptionread-writedeprecatedThis displays the description stored in the Net 1 SFP internal ROM.
1.3.6.1.4.1.664.2.750.1.1.1.5ColumnadTa5kSmNet2SFPDescriptionread-writedeprecatedThis displays the description stored in the Net 2 SFP internal ROM
1.3.6.1.4.1.664.2.750.1.1.1.6ColumnadTa5kSmRingGenTyperead-onlycurrentThe type of ring generator that is used to produce ringing on pots and combo cards.
1.3.6.1.4.1.664.2.750.1.1.1.7ColumnadTa5kSmSMIOTyperead-onlycurrentThe type of backplane interface that connects the Redundant SMs and optionally the SCM.
1.3.6.1.4.1.664.2.750.1.1.1.8ColumnadTa5kSmNet1AutoNegoAdmnStatread-writedeprecatedThis is enablement and disablement of auto negotiation of the Net1 PHY
1.3.6.1.4.1.664.2.750.1.1.1.9ColumnadTa5kSmNet2AutoNegoAdmnStatread-writedeprecatedThis is enablement and disablement of auto negotiation of the Net2 PHY
1.3.6.1.4.1.664.2.750.1.1.1.10ColumnadTa5kSmNet1SFPVendorPartNumberread-onlycurrentThis displays the part-number stored in the Net 1 SFP internal ROM
1.3.6.1.4.1.664.2.750.1.1.1.11ColumnadTa5kSmNet1SFPVendorSerialNumberread-onlydeprecatedThis displays the serial number stored in the Net 1 SFP internal ROM
1.3.6.1.4.1.664.2.750.1.1.1.12ColumnadTa5kSmNet1SFPRxPowerLevelread-onlydeprecatedThis displays transceiver RX power level in 1 dBm on the Net 1 SFP with SFF-8472 extensions
1.3.6.1.4.1.664.2.750.1.1.1.13ColumnadTa5kSmNet1SFPTxPowerLevelread-onlydeprecatedThis displays transceiver TX power level in 1 dBm on the Net 1 SFP with SFF-8472 extensions
1.3.6.1.4.1.664.2.750.1.1.1.14ColumnadTa5kSmNet1SFPTxBiasread-onlydeprecatedThis displays transceiver TX bias in 1 mA on the Net 1 SFP with SFF-8472 extensions
1.3.6.1.4.1.664.2.750.1.1.1.15ColumnadTa5kSmNet1SFPTemperatureread-onlydeprecatedThis displays the internal temperature in 1 Celsius on the Net 1 SFP with SFF-8472 extensions
1.3.6.1.4.1.664.2.750.1.1.1.16ColumnadTa5kSmNet1SFPSupplyVoltageread-onlydeprecatedThis displays the supply voltage in 1 mV on the Net 1 SFP with SFF-8472 extensions
1.3.6.1.4.1.664.2.750.1.1.1.17ColumnadTa5kSmNet2SFPVendorPartNumberread-onlydeprecatedThis displays the vendor part-number stored in the Net 2 SFP internal ROM
1.3.6.1.4.1.664.2.750.1.1.1.18ColumnadTa5kSmNet2SFPVendorSerialNumberread-onlydeprecatedThis displays the vendor serial number stored in the Net 2 SFP internal ROM
1.3.6.1.4.1.664.2.750.1.1.1.19ColumnadTa5kSmNet2SFPRxPowerLevelread-onlydeprecatedThis displays transceiver RX power level in 1 dBm on the Net 2 SFP with SFF-8472 extensions
1.3.6.1.4.1.664.2.750.1.1.1.20ColumnadTa5kSmNet2SFPTxPowerLevelread-onlydeprecatedThis displays transceiver TX power level in 1 dBm on the Net 2 SFP with SFF-8472 extensions
1.3.6.1.4.1.664.2.750.1.1.1.21ColumnadTa5kSmNet2SFPTxBiasread-onlydeprecatedThis displays transceiver TX bias in 1 mA on the Net 2 SFP with SFF-8472 extensions
1.3.6.1.4.1.664.2.750.1.1.1.22ColumnadTa5kSmNet2SFPTemperatureread-onlydeprecatedThis displays the internal temperature in 1 Celsius on the Net 2 SFP with SFF-8472 extensions
1.3.6.1.4.1.664.2.750.1.1.1.23ColumnadTa5kSmNet2SFPSupplyVoltageread-onlydeprecatedThis displays the supply voltage in 1 mV on the Net 2 SFP with SFF-8472 extensions
1.3.6.1.4.1.664.2.750.2NodeadTa5kSmProv
1.3.6.1.4.1.664.2.750.2.1TableadTa5kSmProvTablenot-accessiblecurrent...
1.3.6.1.4.1.664.2.750.2.1.1RowadTa5kSmProvEntrynot-accessiblecurrent...
1.3.6.1.4.1.664.2.750.2.1.1.1ColumnadTa5kSmNoderead-writecurrentThe TA5000 node number. Valid set values are 1..n, where n is adTa5kSmMaxNodes. adTa5kSmNode will return 0 if the node number has not been set.
1.3.6.1.4.1.664.2.750.2.1.1.2ColumnadTa5kSmUplinkread-writedeprecated0 = None 1 - 22 = Slot number assignment 23 = Peer (Used by a special Facility Protect Mode, not used) 24 = Uplink is located on an expansion shelf 25 = Networ…
1.3.6.1.4.1.664.2.750.2.1.1.3ColumnadTa5kSmAggregationread-writecurrentEnabling this setting will allow both net1 and net2 to operate as a single link
1.3.6.1.4.1.664.2.750.2.1.1.4ColumnadTa5kSmPrimaryClockread-writedeprecatedSelect the primary timing source for the system
1.3.6.1.4.1.664.2.750.2.1.1.5ColumnadTa5kSmSecondaryClockread-writedeprecatedSelect the secondary timing source for the system
1.3.6.1.4.1.664.2.750.2.1.1.6ColumnadTa5kSmCurrentClockread-onlydeprecatedRead-Only: Displays which clock is currently in use by the system
1.3.6.1.4.1.664.2.750.2.1.1.7ColumnadTa5kSmClockModeRevertiveread-writedeprecatedEnabling this allows the clock to fail back to the primary should the primary source's health return to normal. Disabled means the clock will remain on the sec…
1.3.6.1.4.1.664.2.750.2.1.1.8ColumnadTa5kSmForceClockFailoverread-writedeprecatedWriting a value to this will cause the clock source to failover, a get will always return 1
1.3.6.1.4.1.664.2.750.2.1.1.10ColumnadTa5kSmNetworkNameread-writecurrentThis is a string that can be bound to this topology.
1.3.6.1.4.1.664.2.750.2.1.1.11ColumnadTa5kSmTopologyChangeCountread-onlycurrentIf the topology of the network changes this number will be incremented.
1.3.6.1.4.1.664.2.750.2.1.1.12ColumnadTa5kSmTopologyInstanceread-onlycurrentUsed to index the Tlv table, each time this is called it creates an instance for that viewer to read bulk data.
1.3.6.1.4.1.664.2.750.2.1.1.13ColumnadTa5kSmLoopASourceread-writedeprecatedDesignate which slot the LoopA Timing source will listen on.
1.3.6.1.4.1.664.2.750.2.1.1.14ColumnadTa5kSmLoopBSourceread-writedeprecatedDesignate which slot the LoopB Timing source will listen on.
1.3.6.1.4.1.664.2.750.2.1.1.15ColumnadTa5kSmExtATyperead-writedeprecatedSelect which type the External clock A input should expect.
1.3.6.1.4.1.664.2.750.2.1.1.16ColumnadTa5kSmExtBTyperead-writedeprecatedSelect which type the External clock B input should expect.
1.3.6.1.4.1.664.2.750.2.1.1.17ColumnadTa5kSmUpstreamChainingread-writedeprecatedEnable/Disable Net1 port for redundancy chaining protection. adTa5kUpstreamChaining has been replaced by adTa5kSmPortMode beginning with TA5000 System Release …
1.3.6.1.4.1.664.2.750.2.1.1.18ColumnadTa5kSmDownstreamChainingread-writedeprecatedEnable/Disable Net2 port for redundancy chaining protection. adTa5kDownstreamChaining has been replaced by adTa5kSmPortMode beginning with TA5000 System Releas…
1.3.6.1.4.1.664.2.750.2.1.1.19ColumnadTa5kSmFallbackClockread-writedeprecatedSelect the fallback timing source for the system
1.3.6.1.4.1.664.2.750.2.1.1.20ColumnadTa5kSmExtAQualityread-writedeprecatedSelect the quality for External Clock A.
1.3.6.1.4.1.664.2.750.2.1.1.21ColumnadTa5kSmExtBQualityread-writedeprecatedSelect the quality for External Clock B.
1.3.6.1.4.1.664.2.750.2.1.1.22ColumnadTa5kSmExtAPreferenceread-writedeprecatedThis object has been replaced by adTa5kSmExtAPriority.
1.3.6.1.4.1.664.2.750.2.1.1.23ColumnadTa5kSmExtBPreferenceread-writedeprecatedThis object has been replaced by adTa5kSmExtBPriority.
1.3.6.1.4.1.664.2.750.2.1.1.24ColumnadTa5kSmUseHopCountread-writedeprecatedEnable or disable the hop count in SM timing messages.
1.3.6.1.4.1.664.2.750.2.1.1.25ColumnadTa5kSmIGMPInterfaceModeread-writecurrentThis item controls processing of IGMP packets.
1.3.6.1.4.1.664.2.750.2.1.1.26ColumnadTa5kSmSTagTPIDread-writecurrentThe S-Tag TPID. The value is intended to be displayed as a hexadecimal number.
1.3.6.1.4.1.664.2.750.2.1.1.27ColumnadTa5kSmExtAPriorityread-writedeprecatedSelect the priority for External Clock A. Set adTa5kSmExtAPriority to 0 to use the node number as the priority. Override this default behavior by setting a val…
1.3.6.1.4.1.664.2.750.2.1.1.28ColumnadTa5kSmExtBPriorityread-writedeprecatedSelect the priority for External Clock B. Set adTa5kSmExtBPriority to 0 to use the node number as the priority. Override this default behavior by setting a val…
1.3.6.1.4.1.664.2.750.2.1.1.29ColumnadTa5kSmInternalSTagread-onlycurrentS-Tag returned for internal data/configuration traffic.
1.3.6.1.4.1.664.2.750.2.1.1.30ColumnadTa5kSmBpRateAlarmSeverityLevelread-writecurrentProvision the severity level of BpRateFallback alarm.
1.3.6.1.4.1.664.2.750.2.2TableadTa5kSmNetworkPortProvTablenot-accessiblecurrent...
1.3.6.1.4.1.664.2.750.2.2.1RowadTa5kSmNetworkPortProvEntrynot-accessiblecurrentThis table is indexed by the ifIndex of each Switch Module faceplate port.
1.3.6.1.4.1.664.2.750.2.2.1.1ColumnadTa5kSmPortModeread-writedeprecatedThis value determines the how this port affects SM redundancy decisions. Unused (1) - this port is ignored in redundancy decisions. Use this setting for ports …
1.3.6.1.4.1.664.2.750.2.2.1.2ColumnadTa5kSmLACPModeread-writedeprecatedLACP Mode for the network port.
1.3.6.1.4.1.664.2.750.2.3NodeadTa5kSmEthernetDefaultInterface
1.3.6.1.4.1.664.2.750.2.3.1ScalaradTa5kSmEthDefaultInterfaceIndexread-writecurrentThe IfIndex of the ethernet default interface. A value of zero indicates no ethernet default interface. ** Warning ** Setting adTa5kSmEthDefaultInterfaceIndex …
1.3.6.1.4.1.664.2.750.2.3.2ScalaradTa5kSmEthernetDefaultIfcTyperead-onlycurrentThe ethernet default interface type.
1.3.6.1.4.1.664.2.750.2.3.3ScalaradTa5kSmEthernetDefaultIfcSlotread-onlycurrentThe ethernet default interface slot. Slots 1-22 represent access module slots. Slot 239 is the active SM slot. Slot 252 is SM-A. Slot 253 is SM-B. adTa5kSmEthe…
1.3.6.1.4.1.664.2.750.2.3.4ScalaradTa5kSmEthernetDefaultIfcPortread-onlycurrentThe ethernet default interface port. This value may represent a physical port or a logical port. For example, if the ethernet default interface is gigabit-ethe…
1.3.6.1.4.1.664.2.750.2.4TableadTa5kSmAlarmProvTablenot-accessiblecurrent...
1.3.6.1.4.1.664.2.750.2.4.1RowadTa5kSmAlarmProvEntrynot-accessiblecurrent...
1.3.6.1.4.1.664.2.750.2.4.1.1ColumnadTa5kSmRingGenFailAlarmEnableread-writecurrentTrue - alarm is enabled
1.3.6.1.4.1.664.2.750.2.4.1.2ColumnadTa5kSmPowerLimitExceededAlarmEnableread-writecurrentTrue - alarm is enabled
1.3.6.1.4.1.664.2.750.2.4.1.3ColumnadTa5kSmDuplicateNodeAlarmEnableread-writecurrentTrue - alarm is enabled
1.3.6.1.4.1.664.2.750.2.4.1.4ColumnadTa5kSmDuplicateScmIpAlarmEnableread-writecurrentTrue - alarm is enabled
1.3.6.1.4.1.664.2.750.2.4.1.5ColumnadTa5kSmNodeNumberProvAlarmEnableread-writecurrentTrue - alarm is enabled
1.3.6.1.4.1.664.2.750.2.4.1.6ColumnadTa5kSmMgmtVlanFailAlarmEnableread-writecurrentTrue - alarm is enabled
1.3.6.1.4.1.664.2.750.2.4.1.7ColumnadTa5kSmioMismatchAlarmEnableread-writecurrentTrue - alarm is enabled
1.3.6.1.4.1.664.2.750.2.4.1.8ColumnadTa5kSmBPRateFallbackAlarmEnableread-writecurrentTrue - alarm is enabled
1.3.6.1.4.1.664.2.750.2.4.1.9ColumnadTa5kSmPeerLinksDownAlarmEnableread-writecurrentTrue - alarm is enabled
1.3.6.1.4.1.664.2.750.3NodeadTa5kSmStatus
1.3.6.1.4.1.664.2.750.3.1TableadTa5kSmClockStatusTablenot-accessiblecurrent...
1.3.6.1.4.1.664.2.750.3.1.1RowadTa5kSmClockStatusEntrynot-accessiblecurrent...
1.3.6.1.4.1.664.2.750.3.1.1.1ColumnadTa5kSmLoopAClockHealthread-onlydeprecatedDisplays the health of the loop A timing source
1.3.6.1.4.1.664.2.750.3.1.1.2ColumnadTa5kSmLoopBClockHealthread-onlydeprecatedDisplays the health of the loop B timing source
1.3.6.1.4.1.664.2.750.3.1.1.3ColumnadTa5kSmBitsAClockHealthread-onlydeprecatedDisplays the health of the bits A timing source
1.3.6.1.4.1.664.2.750.3.1.1.4ColumnadTa5kSmBitsBClockHealthread-onlydeprecatedDisplays the health of the bits B timing source
1.3.6.1.4.1.664.2.750.3.1.1.5ColumnadTa5kSmPrimaryClockHealthread-onlydeprecatedDisplays the health of the primary timing source
1.3.6.1.4.1.664.2.750.3.1.1.6ColumnadTa5kSmSecondaryClockHealthread-onlydeprecatedDisplays the health of the secondary timing source
1.3.6.1.4.1.664.2.750.3.1.1.7ColumnadTa5kSmRingVoltagePresentread-onlydeprecatedBoolean, 0 - Ring voltage is not present, 1 - Ring voltage is present. If you are not using an internal ring generator then this could indicate that the extern…
1.3.6.1.4.1.664.2.750.3.1.1.8ColumnadTa5kSmRingFailread-onlycurrentBoolean, 0 - Not Failed, 1 - Failed.
1.3.6.1.4.1.664.2.750.3.1.1.9ColumnadTa5kSmPeerRingFailread-onlycurrentBoolean, 0 - Not Failed, 1 - Failed.
1.3.6.1.4.1.664.2.750.3.1.1.10ColumnadTa5kSmCurrentHopCountread-onlydeprecatedThe number of hops for the current timing source.
1.3.6.1.4.1.664.2.750.3.1.1.11ColumnadTa5kSmCurrentTimingSourcePriorityread-onlydeprecatedThe priority value for the current timing source.
1.3.6.1.4.1.664.2.750.3.1.1.12ColumnadTa5kSmCurrentTimingSourceQualityread-onlydeprecatedThe quality of the current timing source.
1.3.6.1.4.1.664.2.750.4NodeadTa5kSmTest
1.3.6.1.4.1.664.2.750.4.1TableadTa5kSmMetalicTestAccessTablenot-accessiblecurrent...
1.3.6.1.4.1.664.2.750.4.1.1RowadTa5kSmMetalicTestAccessEntrynot-accessiblecurrent...
1.3.6.1.4.1.664.2.750.4.1.1.1ColumnadTa5kSmFacilityTRread-onlycurrent
1.3.6.1.4.1.664.2.750.4.1.1.2ColumnadTa5kSmFacilityT1R1read-onlycurrent
1.3.6.1.4.1.664.2.750.4.1.1.3ColumnadTa5kSmEquipmentTRread-onlycurrent
1.3.6.1.4.1.664.2.750.4.1.1.4ColumnadTa5kSmEquipmentT1R1read-onlycurrent
1.3.6.1.4.1.664.2.750.4.1.1.5ColumnadTa5kSmLoopTRread-onlycurrent
1.3.6.1.4.1.664.2.750.4.1.1.6ColumnadTa5kSmLoopT1R1read-onlycurrent
1.3.6.1.4.1.664.2.750.5NodeadTa5kSmPerfMon
1.3.6.1.4.1.664.2.750.6NodeadTa5kSmAtpMfg
1.3.6.1.4.1.664.2.750.6.1TableadTa5kSmAtpTablenot-accessiblecurrent...
1.3.6.1.4.1.664.2.750.6.1.1RowadTa5kSmAtpEntrynot-accessiblecurrent...
1.3.6.1.4.1.664.2.750.6.1.1.1ColumnadTa5kSmTemp1read-onlycurrentUpper Temp sensor: Temperature in tenths of a degrees C.
1.3.6.1.4.1.664.2.750.6.1.1.2ColumnadTa5kSmTemp2read-onlycurrentLower Temp sensor: Temperature in tenths of a degrees C.
1.3.6.1.4.1.664.2.750.6.1.1.3ColumnadTa5kSmExpMacread-onlycurrentMac Address of the Expansion Port.
1.3.6.1.4.1.664.2.750.6.1.1.4ColumnadTa5kSmPeerMacread-onlycurrentMac Address of the internal link between the SM and its peer.
1.3.6.1.4.1.664.6.750IdentityadTa5kSmModuleIdentityTotal Access 5000 SwitchModule 1187020L1 MIB
Type Definitions
NameSyntaxStatusDescription
EthernetDefaultInterfaceTypeINTEGER { none(1), gigabitEthernet(2), tenGigabitEthernet(3), lagGroup(4), accessModule(5), efmGroup(6), efmPort(7), erps(8), atmPort(9), rpr(10), atmGroup(11), muxponderSlot(12), xGigabitEthernet(13) }currentSpecifies the interface types which may be the ethernet default interface.
MIB Viewer