ADTRAN-TACONTROLER-PRODUCT-MIB
277 objects
ADTRAN TA Controller Products MIB
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.664.5.63 | IdentityadTaControllerMgmt | ADTRAN TA Controller Products MIB | ||
| 1.3.6.1.4.1.664.5.63.0 | NodeadTaControllerMgmtTraps | |||
| 1.3.6.1.4.1.664.5.63.0.1006301 | NotificationadTASetSingleServiceStateMsgFail | current | Set single service state msg fail. | |
| 1.3.6.1.4.1.664.5.63.0.1006303 | NotificationadTAGetSingleServiceStateMsgFail | current | Get single service state msg fail. | |
| 1.3.6.1.4.1.664.5.63.0.1006305 | NotificationadTASetAllServiceStateMsgFail | current | Set all service state msg fail. | |
| 1.3.6.1.4.1.664.5.63.0.1006307 | NotificationadTAGetAllServiceStateMsgFail | current | Get all service state msg fail. | |
| 1.3.6.1.4.1.664.5.63.0.1006308 | NotificationadTACriticalAudibleRelayTestClear | current | Alarm Relay Test. Toggle Critical Audible Relay clear alarm. | |
| 1.3.6.1.4.1.664.5.63.0.1006309 | NotificationadTACriticalAudibleRelayTestActive | current | Alarm Relay Test. Toggle Critical Audible Relay active alarm. | |
| 1.3.6.1.4.1.664.5.63.0.1006310 | NotificationadTACriticalVisualRelayTestClear | current | Alarm Relay Test. Toggle Critical Visual Relay clear alarm. | |
| 1.3.6.1.4.1.664.5.63.0.1006311 | NotificationadTACriticalVisualRelayTestActive | current | Alarm Relay Test. Toggle Critical Visual Relay active alarm. | |
| 1.3.6.1.4.1.664.5.63.0.1006312 | NotificationadTAMajAudibleRelayTestClear | current | Alarm Relay Test. Toggle Major Audible Relay alarm clear. | |
| 1.3.6.1.4.1.664.5.63.0.1006313 | NotificationadTAMajAudibleRelayTestActive | current | Alarm Relay Test. Toggle Major Audible Relay alarm active. | |
| 1.3.6.1.4.1.664.5.63.0.1006314 | NotificationadTAMajVisualRelayTestClear | current | Alarm Relay Test. Toggle Major Visual Relay alarm clear. | |
| 1.3.6.1.4.1.664.5.63.0.1006315 | NotificationadTAMajVisualRelayTestActive | current | Alarm Relay Test. Toggle Major Visual Relay alarm active. | |
| 1.3.6.1.4.1.664.5.63.0.1006316 | NotificationadTAMinorAudibleRelayTestClear | current | Alarm Relay Test. Toggle Minor Audible Relay alarm clear. | |
| 1.3.6.1.4.1.664.5.63.0.1006317 | NotificationadTAMinorAudibleRelayTestActive | current | Alarm Relay Test. Toggle Minor Audible Relay alarm active. | |
| 1.3.6.1.4.1.664.5.63.0.1006318 | NotificationadTAMinorVisualRelayTestClear | current | Alarm Relay Test. Toggle Minor Visual Relay alarm clear. | |
| 1.3.6.1.4.1.664.5.63.0.1006319 | NotificationadTAMinorVisualRelayTestActive | current | Alarm Relay Test. Toggle Minor Visual Relay alarm active active. | |
| 1.3.6.1.4.1.664.5.63.0.1006320 | NotificationadTAAux1RelayTestClear | current | Alarm Relay Test. Toggle Auxiliary #1 Relay Active alarm clear. | |
| 1.3.6.1.4.1.664.5.63.0.1006321 | NotificationadTAAux1RelayTestActive | current | Alarm Relay Test. Toggle Auxiliary #1 Relay Active alarm active. | |
| 1.3.6.1.4.1.664.5.63.0.1006322 | NotificationadTAAux2RelayTestClear | current | Alarm Relay Test. Toggle Auxiliary #2 Relay Active alarm clear. | |
| 1.3.6.1.4.1.664.5.63.0.1006323 | NotificationadTAAux2RelayTestActive | current | Alarm Relay Test. Toggle Auxiliary #2 Relay Active alarm active. | |
| 1.3.6.1.4.1.664.5.63.0.1006324 | NotificationadTACleiCodeMisMatchClear | current | CLEI code mis-match clear | |
| 1.3.6.1.4.1.664.5.63.0.1006325 | NotificationadTACleiCodeMisMatch | current | CLEI code mis-match. | |
| 1.3.6.1.4.1.664.5.63.0.1006328 | NotificationadTAPowerSheddingInputDeAsserted | current | Power Shedding Input DeAsserted | |
| 1.3.6.1.4.1.664.5.63.0.1006329 | NotificationadTAPowerSheddingInputAsserted | current | Power Shedding Input Asserted | |
| 1.3.6.1.4.1.664.5.63.0.1006330 | NotificationadTAPowerSheddingDeActivated | current | Power Shedding Currently Deactivated | |
| 1.3.6.1.4.1.664.5.63.0.1006331 | NotificationadTAPowerSheddingActivated | current | Power Shedding Currently Activated | |
| 1.3.6.1.4.1.664.5.63.0.1006332 | NotificationadTAFanMPowerAFailClear | current | FANM Bus A Power Failure Alarm clear | |
| 1.3.6.1.4.1.664.5.63.0.1006333 | NotificationadTAFanMPowerAFail | current | FANM Bus A Power Failure Alarm active | |
| 1.3.6.1.4.1.664.5.63.0.1006334 | NotificationadTAFanMPowerBFailClear | current | FANM Bus B Power Failure Alarm clear | |
| 1.3.6.1.4.1.664.5.63.0.1006335 | NotificationadTAFanMPowerBFail | current | FANM Bus B Power Failure Alarm active | |
| 1.3.6.1.4.1.664.5.63.0.1006340 | NotificationadTASrmActiveRlsErrorClear | current | This trap is used to indicate that the previous active system release error state has cleared. | |
| 1.3.6.1.4.1.664.5.63.0.1006341 | NotificationadTASrmActiveRlsErrorActive | current | This trap is used to indicate that the active system release has an error. Walking the adTaSysCtrlSysRlsFilesTable will provide more detail for which spacific … | |
| 1.3.6.1.4.1.664.5.63.0.1006342 | NotificationadTASrmBackupRlsErrorClear | current | This trap is used to indicate that the previous backup system release error has cleared. | |
| 1.3.6.1.4.1.664.5.63.0.1006343 | NotificationadTASrmBackupRlsErrorActive | current | This trap is used to indicate that the backup system release has an error. Walking the adTaSysCtrlSysRlsFilesTable will provide more detail for which specific … | |
| 1.3.6.1.4.1.664.5.63.0.1006344 | NotificationadTASrmNewActiveRelease | current | This trap is used to indicate that there is a new active system release, and the activate backup system release operation has successfully completed. | |
| 1.3.6.1.4.1.664.5.63.0.1006346 | NotificationadTASrmRlsDownloadStarted | current | This trap is used to indicate that a system release download operation has been started. | |
| 1.3.6.1.4.1.664.5.63.0.1006348 | NotificationadTASrmRlsDownloadCompleted | current | This trap is used to indicate that a system release download operation has successfully completed. | |
| 1.3.6.1.4.1.664.5.63.0.1006350 | NotificationadTASrmRlsDownloadFailed | current | This trap is used to indicate that a system release download operation has failed. The EMS should perform a 'get' on the adTaSysCtrlSrmStatus OID for further i… | |
| 1.3.6.1.4.1.664.5.63.0.1006352 | NotificationadTASrmRlsBackupStarted | current | This trap is used to indicate that an Active system release backup operation has been started. | |
| 1.3.6.1.4.1.664.5.63.0.1006354 | NotificationadTASrmRlsBackupCompleted | current | This trap is used to indicate that an Active system release backup operation has successfully completed. | |
| 1.3.6.1.4.1.664.5.63.0.1006356 | NotificationadTASrmRlsBackupFailed | current | This trap is used to indicate that an Active system release backup operation has failed. The EMS should perform a 'get' on the adTaSysCtrlSrmStatus OID for fur… | |
| 1.3.6.1.4.1.664.5.63.0.1006359 | NotificationadTASysCtrlAlarmSeverityChanged | current | The highest active alarm severity has changed. | |
| 1.3.6.1.4.1.664.5.63.0.1006360 | NotificationadTASysCtrlDeviceComFail | current | This trap indicates that an RS485 client has failed to respond. | |
| 1.3.6.1.4.1.664.5.63.0.1006363 | NotificationadTASysCtrlSwdnldStarted | current | Software download started. | |
| 1.3.6.1.4.1.664.5.63.0.1006365 | NotificationadTASysCtrlSwdnldComplete | current | Software download complete. | |
| 1.3.6.1.4.1.664.5.63.0.1006367 | NotificationadTASysCtrlSwdnldFailure | current | Software download failure. | |
| 1.3.6.1.4.1.664.5.63.0.1006372 | NotificationadTAeSysSystemDataError | current | System Data Loss exception. | |
| 1.3.6.1.4.1.664.5.63.0.1006373 | NotificationadTAPowerSheddingServerTimeoutClear | current | Power Shedding Server Timeout Clear | |
| 1.3.6.1.4.1.664.5.63.0.1006374 | NotificationadTAPowerSheddingServerTimeout | current | Power Shedding Server Timeout | |
| 1.3.6.1.4.1.664.5.63.0.1006376 | NotificationadTASysCtrlCardSensed | current | A card has been sensed in the chassis. | |
| 1.3.6.1.4.1.664.5.63.0.1006377 | NotificationadTASysCtrlCardNotSensed | current | A card is no longer sensed in the chassis. | |
| 1.3.6.1.4.1.664.5.63.0.1006378 | NotificationadTASysCtrlCardReady | current | A card is ready to be managed. | |
| 1.3.6.1.4.1.664.5.63.0.1006379 | NotificationadTASysCtrlCardNotReady | current | A card is not ready to be managed. | |
| 1.3.6.1.4.1.664.5.63.0.1006380 | NotificationadTaSysCtrlAutoUpgradeEOSSWarningClear | current | Auto Upgrade End Of Software Support Warning (Clear). | |
| 1.3.6.1.4.1.664.5.63.0.1006381 | NotificationadTaSysCtrlAutoUpgradeEOSSWarningActive | current | This trap is used to indicate the module may not be supported by future SystemReleases. Please contact Adtran customer support for further information. | |
| 1.3.6.1.4.1.664.5.63.0.1006382 | NotificationadTaSysCtrlAutoUpgradeEOSSDeniedClear | current | Auto Upgrade End Of Software Support Denied (Clear). | |
| 1.3.6.1.4.1.664.5.63.0.1006383 | NotificationadTaSysCtrlAutoUpgradeEOSSDeniedActive | current | This trap is used to indicate the module is not supported by the SystemRelease of the provisioned AutoUpgrade configuration file. AutoUpgrade cannot proceed un… | |
| 1.3.6.1.4.1.664.5.63.0.1006384 | NotificationadTASysConfigurationChange | current | A system configuration change has occurred. The frequency of this alarm is controlled by the adTASysConfigurationChangeTimer OID. | |
| 1.3.6.1.4.1.664.5.63.30 | NodeadTaSysCtrlShelf | |||
| 1.3.6.1.4.1.664.5.63.30.3 | TableadTASysCtrlShelfTable | not-accessible | current | A shelf-indexed table of information. |
| 1.3.6.1.4.1.664.5.63.30.3.1 | RowadTASysCtrlShelfEntry | not-accessible | current | |
| 1.3.6.1.4.1.664.5.63.30.3.1.1 | ColumnadTASysCtrlShelfNumber | read-only | current | Index representing each shelf. |
| 1.3.6.1.4.1.664.5.63.30.3.1.2 | ColumnadTASysCtrlModuleRemovedStatus | read-only | current | A bitmask representing Module Removed status for each shelf. Trailing empty bytes are truncated. |
| 1.3.6.1.4.1.664.5.63.30.4 | ScalaradTASysCtrlAlarmSeverityLevel | read-only | deprecated | The highest active alarm severity level. Deprecated, please use adTaAlarmMasterSeverityLevel. |
| 1.3.6.1.4.1.664.5.63.30.6 | ScalaradTASysConfigurationChangeTimer | read-write | current | The frequency an alarm will be sent if a change occurs on the system. |
| 1.3.6.1.4.1.664.5.63.30.8 | ScalaradTASysLastConfigChangeAlarmTime | read-only | current | The last time the alarm was generated. |
| 1.3.6.1.4.1.664.5.63.40 | NodeadTaSysCtrlSlot | |||
| 1.3.6.1.4.1.664.5.63.40.3 | TableadTASysCtrlModuleTable | not-accessible | current | Table of status OIDs indexed by slot/module. |
| 1.3.6.1.4.1.664.5.63.40.3.1 | RowadTASysCtrlModuleEntry | not-accessible | current | |
| 1.3.6.1.4.1.664.5.63.40.3.1.1 | ColumnadTASysCtrlModuleNumber | read-only | current | Index for each slot/module. |
| 1.3.6.1.4.1.664.5.63.40.3.1.2 | ColumnadTASysCtrlModuleDiscoveryStatus | read-only | current | The current discovery status of each slot or module in the system. |
| 1.3.6.1.4.1.664.5.63.50 | NodeadTaSysCtrlScaMgmt | |||
| 1.3.6.1.4.1.664.5.63.50.3 | ScalaradTaSysCtrlSCAConfigChangeVersion | read-only | current | The current version number of the SCA file. If a change happen on the system, this OID will return the next version of the SCA file. |
| 1.3.6.1.4.1.664.5.63.50.20 | TableadTaSysCtrlScaTable | not-accessible | current | Expansion OIDs for the HDX system. |
| 1.3.6.1.4.1.664.5.63.50.20.1 | RowadTaSysCtrlScaEntry | not-accessible | current | |
| 1.3.6.1.4.1.664.5.63.50.20.1.1 | ColumnadTaSysCtrlCUShelfNumber | read-only | current | The shelf number the controller is installed in. |
| 1.3.6.1.4.1.664.5.63.50.20.1.5 | ColumnadTaSysCtrlSCAProvItemChanged | read-only | current | Bitmap of cards with changed provisions. This read-only OID will return a bitmap of slots whose provisions have changed since power-up or the last SCA save ope… |
| 1.3.6.1.4.1.664.5.63.50.20.1.7 | ColumnadTaSysCtrlSCAPresentCards | read-only | current | Bitmap of cards 'present' in the shelf. This read-only OID will return a bitmap of slots with cards installed. This is an ascending sequence of bits where the … |
| 1.3.6.1.4.1.664.5.63.50.20.1.9 | ColumnadTaSysCtrlSCASlotsWithProvData | read-only | current | Bitmap of slots with provision data. This read-only OID will return a bitmap of slots with provision information. This is an ascending sequence of bits where t… |
| 1.3.6.1.4.1.664.5.63.50.20.1.11 | ColumnadTaSysCtrlSCAoptRestoreCardBitmask | read-write | current | SCA restore to linecard enable bitmask. This OID accesses an enable/disable bitmap indicating which slots should have their provision information restored duri… |
| 1.3.6.1.4.1.664.5.63.60 | NodeadTaSysCtrlProvMgmt | |||
| 1.3.6.1.4.1.664.5.63.60.10 | ScalaradTATIDSysNameSyncEnable | read-write | current | Enable or disable the synchronization of the TID and SNMP SysName provisions. Enabling this option will overwrite the current SysName with the TID and any subs… |
| 1.3.6.1.4.1.664.5.63.60.11 | ScalaradTATL1echoEnable | read-write | current | Enable or disable character echo on the TL1 port. |
| 1.3.6.1.4.1.664.5.63.60.12 | ScalaradTATL1PortExchange | read-write | current | Exchange the TL1 ports. |
| 1.3.6.1.4.1.664.5.63.60.13 | TableadTAScmEthernetInterfaceModeTable | not-accessible | current | Table of ethernet interface modes. |
| 1.3.6.1.4.1.664.5.63.60.13.1 | RowadTAScmEthernetInterfaceModeEntry | not-accessible | current | Set ethernet interface mode to ethercraft or ethernet. |
| 1.3.6.1.4.1.664.5.63.60.13.1.1 | ColumnadTAScmEthernetInterfaceMode | read-write | current | Set ethernet interface mode to ethercraft or ethernet. |
| 1.3.6.1.4.1.664.5.63.70 | NodeadTaSysCtrlPowerShed | |||
| 1.3.6.1.4.1.664.5.63.70.10 | ScalaradTASysCtrlPowerShedEnable | read-write | current | Global Enable / Disable of Power Shedding for the entire system. |
| 1.3.6.1.4.1.664.5.63.70.11 | ScalaradTASysCtrlPowerShedAlmInput | read-write | current | This specifies the External Alarm Input that will be monitored that will indicate loss of AC power. The enumerated set of values is system-dependent. For TA500… |
| 1.3.6.1.4.1.664.5.63.70.12 | ScalaradTASysCtrlPowerShedActivateDelay | read-write | current | This specifies the number of minutes the controller should wait to initiate Power Shedding once AC power is lost. |
| 1.3.6.1.4.1.664.5.63.70.13 | ScalaradTASysCtrlPowerShedDeActivateDelay | read-write | current | This specifies the number of minutes the controller should wait to cancel Power Shedding once AC power is restored. |
| 1.3.6.1.4.1.664.5.63.70.14 | ScalaradTASysCtrlPowerShedACFailAlarmDescription | read-write | current | User specified string that describes the AC failure alarm. |
| 1.3.6.1.4.1.664.5.63.70.15 | ScalaradTASysCtrlPowerShedACFailAlarmSeverity | read-write | current | Power Shedding AC Failure alarm severity. |
| 1.3.6.1.4.1.664.5.63.70.16 | ScalaradTASysCtrlPowerShedACFailAlarmAIDIndex | read-write | current | AID Index. |
| 1.3.6.1.4.1.664.5.63.70.17 | ScalaradTASysCtrlPowerShedACFailAlarmConditionCode | read-write | current | Condition code. |
| 1.3.6.1.4.1.664.5.63.70.30 | ScalaradTASysCtrlPowerShedStatus | read-only | current | This indicates the current Power Shedding Status of the System. |
| 1.3.6.1.4.1.664.5.63.70.31 | ScalaradTASysCtrlPowerShedCountDown | read-only | current | Countdown timer indicating the number of minutes remaining until Power Shedding is Activated or until Power Shedding is Deactivated. If Power Shedding is ENABL… |
| 1.3.6.1.4.1.664.5.63.70.32 | ScalaradTASysCtrlPowerShedStateAlarmSeverity | read-write | current | Power Shedding State alarm severity. |
| 1.3.6.1.4.1.664.5.63.70.33 | ScalaradTASysCtrlPowerShedRemoteServerIP | read-write | current | Remote Power-Shedding server IP address. Zero signifies 'none'. |
| 1.3.6.1.4.1.664.5.63.80 | NodeadTaSysCtrlSysSSHMgmt | |||
| 1.3.6.1.4.1.664.5.63.80.10 | NodeadTaSysCtrlSysSshKeyMgmt | |||
| 1.3.6.1.4.1.664.5.63.80.10.1 | ScalaradTaSysCtrlCurrentKeySize | read-only | current | Read-only display of current key size. |
| 1.3.6.1.4.1.664.5.63.80.10.2 | ScalaradTaSysCtrlKeySize | read-write | current | Sets a new key size. |
| 1.3.6.1.4.1.664.5.63.80.10.15 | ScalaradTaSysCtrlGenerateKeys | read-write | current | Generates new keys based upon new key size. |
| 1.3.6.1.4.1.664.5.63.80.10.16 | ScalaradTaSysCtrlGenKeyStatus | read-only | current | Status of new keys generation process. |
| 1.3.6.1.4.1.664.5.63.80.10.20 | ScalaradTaSysCtrlReKeyTimeout | read-write | current | Amount of time in minutes since last key exchange to trigger a rekey. The default value is 480 minutes. Use 0 for no limit. |
| 1.3.6.1.4.1.664.5.63.80.10.21 | ScalaradTaSysCtrlReKeyDataLimit | read-write | current | Amount of data exchange in megabytes since last key exchange to trigger a rekey. The default value is 1000 megabytes. Use 0 for no limit. |
| 1.3.6.1.4.1.664.5.63.90 | NodeadTaSysCtrlSysRlsMgmt | |||
| 1.3.6.1.4.1.664.5.63.90.1 | TableadTaSysCtrlSysRlsTable | not-accessible | current | The SRM System Release Table. |
| 1.3.6.1.4.1.664.5.63.90.1.1 | RowadTaSysCtrlSysRlsEntry | not-accessible | current | An entry in the SRM System Release Table. |
| 1.3.6.1.4.1.664.5.63.90.1.1.1 | ColumnadTaSysCtrlSrmReleaseIndex | read-only | current | 1 repersents the Active System Release, and 2 represents the Backup System Release. |
| 1.3.6.1.4.1.664.5.63.90.1.1.2 | ColumnadTaSysCtrlSrmReleaseName | read-only | current | This OID displays the System Release Name. |
| 1.3.6.1.4.1.664.5.63.90.1.1.3 | ColumnadTaSysCtrlSrmReleaseFilename | read-only | current | The ReleaseFilename OID specifies the Release filename that was retrieved by the System Release Manager system. This release file contains information such as … |
| 1.3.6.1.4.1.664.5.63.90.1.1.4 | ColumnadTaSysCtrlSrmReleaseStatus | read-only | current | The Release Status indicates the current state, status, and file counts for the Active or Backup system release. For example: Idle, Complete, 27/27 Files |
| 1.3.6.1.4.1.664.5.63.90.1.1.5 | ColumnadTaSysCtrlSrmReleaseMemoryUsageKB | read-only | current | The number of flash memory KBytes the System Release is currently using to store the system release files. |
| 1.3.6.1.4.1.664.5.63.90.1.1.6 | ColumnadTaSysCtrlSrmReleaseFileCount | read-only | current | The total number of unique files in a System Release, including the SRA file and the individual firmware files. |
| 1.3.6.1.4.1.664.5.63.90.1.1.7 | ColumnadTaSysCtrlSrmReleaseProductCount | read-only | current | The total number of products supported by the System Release. |
| 1.3.6.1.4.1.664.5.63.90.1.1.8 | ColumnadTaSysCtrlSrmReleaseFilesTableEntries | read-only | current | The number of entries in the adTaSysCtrlSysRlsFilesTable. This value is the adTaSysCtrlSrmReleaseProductCount plus 1 for the release file. |
| 1.3.6.1.4.1.664.5.63.90.1.1.9 | ColumnadTaSysCtrlSrmReleaseErrorBitmask | read-only | current | A system release can be in error for several reasons, and this bitmap is used to show which reason. The various bit value positions are: 1 File Not Found 2 Inv… |
| 1.3.6.1.4.1.664.5.63.90.2 | TableadTaSysCtrlSysRlsFilesTable | not-accessible | current | |
| 1.3.6.1.4.1.664.5.63.90.2.1 | RowadTaSysCtrlSysRlsFilesEntry | not-accessible | current | |
| 1.3.6.1.4.1.664.5.63.90.2.1.1 | ColumnadTaSysCtrlSrmRlsFilesIndex | read-only | current | Index for a file that is part of a System Release. There will be duplicate filenames in this table, because different products may share firmware. |
| 1.3.6.1.4.1.664.5.63.90.2.1.2 | ColumnadTaSysCtrlSrmRlsFilesInfo | read-only | current | This OID displays a release file's filename, product part number, product rev range, file rev, and detailed file status info. The file status info will display… |
| 1.3.6.1.4.1.664.5.63.90.10 | ScalaradTaSysCtrlSrmCancel | read-write | current | Request that the current System Release Manager operation is be stopped. This OID will have no effect if the SRM system is not active (Idle/Cancel/Error/Comple… |
| 1.3.6.1.4.1.664.5.63.90.11 | ScalaradTaSysCtrlSrmActivateBrls | read-write | current | This OID instructs the System Release Manager to make the Backup and Active Releases to switch roles. The Backup Release becomes the Active Release and vice ve… |
| 1.3.6.1.4.1.664.5.63.90.12 | ScalaradTaSysCtrlSrmBackupArls | read-write | current | This OID instructs the System Release Manager to overwrite the Backup Release with a backup copy of the Active Release. This OID will have no effect if the SRM… |
| 1.3.6.1.4.1.664.5.63.90.13 | ScalaradTaSysCtrlSrmDownloadInitiate | read-write | current | This OID instructs the System Release Manager to replace the Backup release files with the SRM Download Filename release. SRM will use Remote IO to acquire fil… |
| 1.3.6.1.4.1.664.5.63.90.14 | ScalaradTaSysCtrlSrmDownloadSameFiles | read-write | current | Enable or disable the SRM Download Same Files option. Enabling this option will instruct SRM to completly delete the Backup release and remotely get every file… |
| 1.3.6.1.4.1.664.5.63.90.15 | ScalaradTaSysCtrlSrmDownloadRetries | read-write | current | This OID instructs the System Release Manager how many times it should attempt to Download files to the Backup system release after the first download has fail… |
| 1.3.6.1.4.1.664.5.63.90.16 | ScalaradTaSysCtrlSrmDownloadFilename | read-write | current | The DownloadFilename OID specifies the Release filename to be retrieved by the System Release Manager system. This release file contains information such as mo… |
| 1.3.6.1.4.1.664.5.63.90.17 | ScalaradTaSysCtrlSrmDownloadBasepath | read-write | current | The DownloadBasepath OID allows the customer to specify a directory prefix where the SRM release and firmware files will be located on the server. It is assume… |
| 1.3.6.1.4.1.664.5.63.90.18 | ScalaradTaSysCtrlSrmScheduledDownload | read-write | current | The ScheduledDownload OID allows the customer to specify a date and time that the SRM will start a download to the Backup System Release. The specified time mu… |
| 1.3.6.1.4.1.664.5.63.90.19 | ScalaradTaSysCtrlSrmScheduledActivate | read-write | current | The ScheduledActivate OID allows the customer to specify a date and time that SRM will make the Backup System Release the Active System Release. The specified … |
| 1.3.6.1.4.1.664.5.63.90.20 | ScalaradTaSysCtrlSrmValidateInterval | read-write | current | This OID instructs the System Release Manager how often, in days, it should check that a complete Active and/or Backup release is still valid. A value of 0 ind… |
| 1.3.6.1.4.1.664.5.63.90.21 | ScalaradTaSysCtrlSrmStatus | read-only | current | This OID will return a formatted string describing the current status and progress of the SRM operations. Refer to the ''System Release Manager Feature'' user … |
| 1.3.6.1.4.1.664.5.63.90.22 | ScalaradTaSysCtrlSrmAutoUpgradeCtrl | read-write | current | Enable or disable SRM's control of Auto Upgrade. This option is enabled by default for controllers that support SRM. Enabling Auto Upgrade control forces Auto … |
| 1.3.6.1.4.1.664.5.63.100 | NodeadTaSysCtrlAutoUpgrade | |||
| 1.3.6.1.4.1.664.5.63.100.1 | ScalaradTaSysCtrlAutoUpgradeActiveSlots | read-only | current | Return information regarding active AutoUpgrades. The format is a(b,b,b) where a is the number of slots currently upgrading, and b is a comma separated list of… |
| 1.3.6.1.4.1.664.5.63.100.2 | ScalaradTaSysCtrlAutoUpgradeErrorSlots | read-only | current | Return information regarding slots with AutoUpgrade errors. The format is a(b,b,b) where a is the number of slots that are currently in an AutoUpgrade error-st… |
| 1.3.6.1.4.1.664.5.63.100.3 | ScalaradTaSysCtrlAutoUpgradeNeededSlots | read-only | current | Return information regarding the number of slots needing upgrade. The format is a(b,b,b) where a is the number of slots needing upgrade, and b is a comma separ… |
| 1.3.6.1.4.1.664.5.63.100.4 | ScalaradTaSysCtrlAutoUpgradeDeferredResetSlots | read-only | current | Return information regarding slots that AutoUpgrade has deferred module reset following upgrade in conjunction with System Controlled Reset (SCR). The format i… |
| 1.3.6.1.4.1.664.5.63.100.5 | ScalaradTaSysCtrlAutoUpgradeActiveSlotsBitmask | read-only | current | This read-only OID will return a bitmap of slots currently upgrading. This is an ascending sequence of bits where the LSB (Least Significant Bit) of the first … |
| 1.3.6.1.4.1.664.5.63.100.6 | ScalaradTaSysCtrlAutoUpgradeErrorSlotsBitmask | read-only | current | This read-only OID will return a bitmap of slots having an AutoUpgrade eror status. This is an ascending sequence of bits where the LSB (Least Significant Bit)… |
| 1.3.6.1.4.1.664.5.63.100.7 | ScalaradTaSysCtrlAutoUpgradeNeededSlotsBitmask | read-only | current | This read-only OID will return a bitmap of slots needing upgrade. This is an ascending sequence of bits where the LSB (Least Significant Bit) of the first byte… |
| 1.3.6.1.4.1.664.5.63.100.8 | ScalaradTaSysCtrlAutoUpgradeDeferResetSlotsBitmask | read-only | current | This read-only OID will return a bitmap of slots whose post- upgrade reset has been deferred for System Controlled Reboot. This is an ascending sequence of bit… |
| 1.3.6.1.4.1.664.5.63.100.10 | ScalaradTaSysCtrlAutoUpgradeUseSCR | read-write | current | Controls AutoUpgrades use of the System Controlled Reboot (SCR) system. If set to yes, module reboot will be deferred until later, based upon SCR settings. |
| 1.3.6.1.4.1.664.5.63.100.12 | ScalaradTaSysCtrlAutoUpgradeSCRStatus | read-only | current | Returns an enum indicating readiness to perform SCR with repect to the AutoUpgrade system. The SCR system will ignore all initiate requests unless the current … |
| 1.3.6.1.4.1.664.5.63.100.30 | ScalaradTaSysCtrlAutoUpgradeEOSSCapable | read-only | current | Indicates whether EOSS (End Of Software Support) information is present and valid in this software build. |
| 1.3.6.1.4.1.664.5.63.100.32 | ScalaradTaSysCtrlAutoUpgradeEOSSWarnSlotsBitmask | read-only | current | This read-only OID will return a bitmap of slots with an active EOSS (End Of Software Support) Warning status. This is an ascending sequence of bits where the … |
| 1.3.6.1.4.1.664.5.63.100.34 | ScalaradTaSysCtrlAutoUpgradeEOSSDenySlotsBitmask | read-only | current | This read-only OID will return a bitmap of slots with an active EOSS (End Of Software Support) Denied status. This is an ascending sequence of bits where the L… |
| 1.3.6.1.4.1.664.5.63.110 | NodeadTaSysCtrlFileExport | |||
| 1.3.6.1.4.1.664.5.63.110.1 | NodeadTaSysCtrlSystemLog | |||
| 1.3.6.1.4.1.664.5.63.110.1.1 | ScalaradTASystemEventLogAutoExportMode | read-write | current | System log auto export mode.. |
| 1.3.6.1.4.1.664.5.63.110.1.3 | ScalaradTaSystemEventLogPreventFileOverlap | read-write | current | Prevent sending an event in the system log more than once. |
| 1.3.6.1.4.1.664.5.63.110.1.5 | ScalaradTaSystemEventLogFilePrefix | read-write | current | The prefix added to make the system log file name. |
| 1.3.6.1.4.1.664.5.63.110.1.7 | ScalaradTaSystemEventLogFileSuffix | read-write | current | The suffix added to make the system log file name. |
| 1.3.6.1.4.1.664.5.63.110.1.9 | ScalaradTaSystemEventLogRemoteDirectory | read-write | current | The remote directory on the severe where the system log file is exported to. |
| 1.3.6.1.4.1.664.5.63.110.1.11 | ScalaradTaSystemEventLogRemoteFileName | read-only | current | The remote file name on the severe where the system log file is exported to. |
| 1.3.6.1.4.1.664.5.63.110.1.13 | ScalaradTaSystemEventLogAutoExportNumberOfDays | read-write | current | The number of days before the system log is exported. (Military Time/24 hour time) |
| 1.3.6.1.4.1.664.5.63.110.1.15 | ScalaradTaSystemEventLogHourOfDayToExportSysLog | read-write | current | The hour of the day to export system Log. |
| 1.3.6.1.4.1.664.5.63.110.1.17 | ScalaradTaSystemEventLogMinuteOfDayToExportSysLog | read-write | current | The hour of the day to export system Log. |
| 1.3.6.1.4.1.664.5.63.110.1.19 | ScalaradTaSystemEventLogExportRetries | read-write | current | The number of retries to export system event log. |
| 1.3.6.1.4.1.664.5.63.110.1.21 | ScalaradTaSystemEventLogRemotetHost | read-write | deprecated | The remote file Host. This OID is deprecated. Use adTaSystemEventLogRemotetHostInetAddress to set IPv4 and IPv6 address. |
| 1.3.6.1.4.1.664.5.63.110.1.23 | ScalaradTaSystemEventLogPrevExportTime | read-only | current | The status of the last system log export. |
| 1.3.6.1.4.1.664.5.63.110.1.25 | ScalaradTaSystemEventLogPrevExportStatus | read-only | current | The previous export status. |
| 1.3.6.1.4.1.664.5.63.110.1.27 | ScalaradTaSystemEventLogNextAutoExportScheduled | read-only | current | The information about the next system log auto export. |
| 1.3.6.1.4.1.664.5.63.110.1.29 | ScalaradTaSystemEventLogManualExport | read-write | current | Manual export of system log. |
| 1.3.6.1.4.1.664.5.63.110.1.31 | ScalaradTaSystemEventLogCurrentStatus | read-only | current | The current export status. |
| 1.3.6.1.4.1.664.5.63.110.1.32 | ScalaradTaSystemEventLogRemotetHostInetAddressType | read-only | current | The remote file Host address type (Ipv6 or Ipv4). |
| 1.3.6.1.4.1.664.5.63.110.1.33 | ScalaradTaSystemEventLogRemotetHostInetAddress | read-write | current | The remote file Host address (Ipv6 or Ipv4). Backwards compatibility: Setting this address to a IPv4 address will update adTaSystemEventLogRemotetHost provisio… |
| 1.3.6.1.4.1.664.5.63.110.20 | NodeadTaSysCtrlGeneralFileExport | |||
| 1.3.6.1.4.1.664.5.63.110.20.1 | ScalaradTaGenExportRemotetHost | read-write | deprecated | The remote file name. This OID is deprecated. Use adTaGenExportRemotetHostInetAddress to set IPv4 and IPv6 address. |
| 1.3.6.1.4.1.664.5.63.110.20.2 | ScalaradTaGeneralExportRemoteHostMethod | read-write | current | File transfer method to use to transfer General Export files from the controller. ftmTFTP(1) indicates TFTP transfer protocol. ftmFTOT(2) indicates FTOT transf… |
| 1.3.6.1.4.1.664.5.63.110.20.3 | ScalaradTaGenExportRemoteFilePath | read-write | current | The remote file name on the severe where the system log file is exported to. |
| 1.3.6.1.4.1.664.5.63.110.20.5 | ScalaradTaGenExportStatus | read-only | current | The previous export status. |
| 1.3.6.1.4.1.664.5.63.110.20.7 | ScalaradTaGenExportFileName | read-only | current | The last file exported. |
| 1.3.6.1.4.1.664.5.63.110.20.9 | ScalaradTaGeneralExportRetries | read-write | current | The number of retries to export file. |
| 1.3.6.1.4.1.664.5.63.110.20.11 | ScalaradTaGenExportPrefixString | read-write | current | A prefix to add to the General File Export file name received by the line card. |
| 1.3.6.1.4.1.664.5.63.110.20.12 | ScalaradTaGenExportSuffixString | read-write | current | A suffix to add to the General File Export file name received by the line card. |
| 1.3.6.1.4.1.664.5.63.110.20.14 | ScalaradTaGenExportExceptionReportEnable | read-write | current | Enable/Disable automatically generated exception reports. Manually generated reports are always enabled. |
| 1.3.6.1.4.1.664.5.63.110.20.15 | ScalaradTaGenExportRemotetHostInetAddressType | read-only | current | The remote file server address InetAddress Type. |
| 1.3.6.1.4.1.664.5.63.110.20.16 | ScalaradTaGenExportRemotetHostInetAddress | read-write | current | The general export remote file Sever address. Backwards compatibility: Setting this address to a IPv4 address will update adTaGenExportRemotetHost provision ad… |
| 1.3.6.1.4.1.664.5.63.120 | NodeadTaSysCtrlSNTP | |||
| 1.3.6.1.4.1.664.5.63.120.1 | ScalaradTaSntpServer | read-write | current | The remote SNTP Server. |
| 1.3.6.1.4.1.664.5.63.120.3 | ScalaradTaDSTAutomaticAdjustment | read-write | current | This option sets automatic adjustment for North American daylight saving time. Available values are Enabled and Disabled. The default value is Enabled. |
| 1.3.6.1.4.1.664.5.63.120.5 | ScalaradTaLocalTimeZone | read-write | deprecated | This option sets the time zone in which the MX2800 unit is located. Possible values consist of North American time zones from Hawaii-Aleutian Standard Time to … |
| 1.3.6.1.4.1.664.5.63.120.7 | ScalaradTaRefreshPeriod | read-write | current | This option sets the length of time between queries to the server. The available values range from 1 minute to 60 minutes at 5-minute increments. The default v… |
| 1.3.6.1.4.1.664.5.63.120.9 | ScalaradTaTimeProtocolState | read-write | current | This option sets the mode or protocol used to retrieve the date and time from the server. Possible values are Disabled, SNTP, and Net Time. When the State opti… |
| 1.3.6.1.4.1.664.5.63.120.11 | ScalaradTaSntpOperationStaus | read-only | current | SNTP operations status. |
| 1.3.6.1.4.1.664.5.63.120.13 | ScalaradTaSntpTimeOutCount | read-only | current | A running time out count of SNTP Server1. This count is reset to zero if the server is changed. |
| 1.3.6.1.4.1.664.5.63.120.15 | ScalaradTaSntpGMTtimeZoneString | read-write | current | This OID will set the Time Zone Offset. This setting will override the adTaLocalTimeZoneGMToffset OID in the Controller. ** Format: (GMT[+,-][00-23]:[00-59])Ti… |
| 1.3.6.1.4.1.664.5.63.120.17 | ScalaradTaSntpServer2 | read-write | current | The remote SNTP redundant Server 2. |
| 1.3.6.1.4.1.664.5.63.120.18 | ScalaradTaSntpServer3 | read-write | current | The remote SNTP redundant Server 3. |
| 1.3.6.1.4.1.664.5.63.120.19 | ScalaradTaSntpServer4 | read-write | current | The remote SNTP redundant Server 4. |
| 1.3.6.1.4.1.664.5.63.120.21 | ScalaradTaSntpTimeOutProv | read-write | current | SNTP wait time before it times out. The number of seconds before SNTP message time out. |
| 1.3.6.1.4.1.664.5.63.120.23 | ScalaradTaSntpTimeRetryProv | read-write | current | SNTP retry. The number of times to retry a SNTP request each server. to a SNTP server. |
| 1.3.6.1.4.1.664.5.63.120.25 | ScalaradTaSntpTimeOutCountServer2 | read-only | current | A running time out count of SNTP Server2. This count is reset to zero if the server is changed. |
| 1.3.6.1.4.1.664.5.63.120.26 | ScalaradTaSntpTimeOutCountServer3 | read-only | current | A running time out count of SNTP Server3. This count is reset to zero if the server is changed. |
| 1.3.6.1.4.1.664.5.63.120.27 | ScalaradTaSntpTimeOutCountServer4 | read-only | current | A running time out count of SNTP Server4. This count is reset to zero if the server is changed. |
| 1.3.6.1.4.1.664.5.63.120.29 | ScalaradTaSntpCurrentServer | read-only | current | The current server being used. Server 1 to 4. |
| 1.3.6.1.4.1.664.5.63.130 | NodeadTaSysLog | |||
| 1.3.6.1.4.1.664.5.63.130.1 | ScalaradTaSysLogServer | read-write | deprecated | The remote SysLog Server. This OID is deprecated for support of IPv6. Use adTaSysLogServerNetAddress. |
| 1.3.6.1.4.1.664.5.63.130.2 | ScalaradTaSysLogServer2 | read-write | deprecated | The second remote SysLog Server. |
| 1.3.6.1.4.1.664.5.63.130.3 | ScalaradTaSysLogMode | read-write | current | Enable or Disable SysLog feature. |
| 1.3.6.1.4.1.664.5.63.130.4 | ScalaradTaExportCtrlToSysLog | read-write | current | Send the system event log entries to syslog client (RFC 3164 syslog clients). |
| 1.3.6.1.4.1.664.5.63.130.6 | ScalaradTaSysLogServer3 | read-write | deprecated | The third remote SysLog Server 3. |
| 1.3.6.1.4.1.664.5.63.130.7 | ScalaradTaSysLogServer4 | read-write | deprecated | The fourth remote SysLog Server. |
| 1.3.6.1.4.1.664.5.63.130.10 | TableadTaSysLogServerTable | not-accessible | current | Remote SysLog Server Table |
| 1.3.6.1.4.1.664.5.63.130.10.1 | RowadTaSysLogServerEntry | not-accessible | current | Each entry contains one Remote SysLog Server. |
| 1.3.6.1.4.1.664.5.63.130.10.1.1 | ColumnadTaSysLogServerIndex | not-accessible | current | The index value that uniquely identifies Remote SysLog Server 1 to 4 |
| 1.3.6.1.4.1.664.5.63.130.10.1.2 | ColumnadTaSysLogServerAddressType | read-only | current | The type of adTaSysLogServerInetAddress. |
| 1.3.6.1.4.1.664.5.63.130.10.1.3 | ColumnadTaSysLogServerInetAddress | read-write | current | Remote SysLog Server address. |
| 1.3.6.1.4.1.664.5.63.140 | NodeadTaDhcpServer | |||
| 1.3.6.1.4.1.664.5.63.140.10 | ScalaradTaDhcpNetworkInterface | read-write | current | The ifIndex of the Controller Ethernet interface that the DHCP server runs on. |
| 1.3.6.1.4.1.664.5.63.140.12 | ScalaradTaDhcpSubNetMask | read-only | current | The Netmask of the DHCP interface address. A subnet mask defines how many bits of an IP address to use for the network/subnet ID and how many bits to use for t… |
| 1.3.6.1.4.1.664.5.63.140.14 | ScalaradTaDhcpSubNetLength | read-only | current | The subnet mask by length. See adTaDhcpSubNetMask. |
| 1.3.6.1.4.1.664.5.63.140.16 | ScalaradTaDhcpStartIpAddress | read-write | current | Send the system event log entries to syslog client (RFC 3164 syslog clients). |
| 1.3.6.1.4.1.664.5.63.140.18 | ScalaradTaDhcpEndIpAddress | read-write | current | Send the system event log entries to syslog client (RFC 3164 syslog clients). |
| 1.3.6.1.4.1.664.5.63.140.20 | ScalaradTaDhcpSubNetAddress | read-only | current | A subnet IP Address. |
| 1.3.6.1.4.1.664.5.63.140.22 | ScalaradTaDhcpLeasDurationHours | read-write | current | DHCP lease duration hours. If hours and minutes are set to zero the DHCP lease duration will be set to one hour. The minimum lease duration will be 300 seconds. |
| 1.3.6.1.4.1.664.5.63.140.24 | ScalaradTaDhcpLeasDurationMintues | read-write | current | DHCP lease duration minutes. If hours and minutes are set to zero the DHCP lease duration will be set to one hour. The minimum lease duration will be 300 secon… |
| 1.3.6.1.4.1.664.5.63.140.26 | ScalaradTaDhcpServerCommands | read-write | current | DHCP Server command. startDhcpServer - restart DHCP server. Only if the server was stoped. stopDhcpServer - Stop the DhcpServer if it is running. dhcpNoCommand… |
| 1.3.6.1.4.1.664.5.63.140.28 | ScalaradTaDhcpServerOperationStatus | read-only | current | The DHCP server status. |
| 1.3.6.1.4.1.664.5.63.140.40 | TableadTaDhcpServerStatusTable | not-accessible | current | |
| 1.3.6.1.4.1.664.5.63.140.40.1 | RowadTaDhcpServerStatusTableEntry | not-accessible | current | |
| 1.3.6.1.4.1.664.5.63.140.40.1.1 | ColumnadTaDhcpServerStatusIndex | read-only | current | Index for a DHCP Server Status. |
| 1.3.6.1.4.1.664.5.63.140.40.1.4 | ColumnadTaDhcpServerStatus | read-only | current | Dhcp Server Status. |
| 1.3.6.1.4.1.664.5.63.150 | NodeadTaModuleReset | |||
| 1.3.6.1.4.1.664.5.63.150.10 | ScalaradTaModuleResetSlot | read-write | current | SNMP slot number of module to be reset, else 0 (zero) if all modules should be reset except the controller, -1 if all modules should be reset including control… |
| 1.3.6.1.4.1.664.5.63.150.12 | ScalaradTaModuleResetCtrl | read-write | current | This OID must be used in conjunction with the adTaModuleResetSlot OID, refer to the above description for details. |
| 1.3.6.1.4.1.664.5.63.160 | NodeadTaSecurity | |||
| 1.3.6.1.4.1.664.5.63.160.50 | NodeadTaSSLConfiguration | |||
| 1.3.6.1.4.1.664.5.63.160.50.5 | ScalaradTaSSLKeySizeBits | read-write | current | This specifies the key size in bits. If not specified then 1024 is used. |
| 1.3.6.1.4.1.664.5.63.160.50.7 | ScalaradTaSSLKeyType | read-write | current | SSL key type to generate and use. |
| 1.3.6.1.4.1.664.5.63.160.50.9 | ScalaradTaSSLInputPassword | read-write | current | The passwords for the input private key file. |
| 1.3.6.1.4.1.664.5.63.160.50.11 | ScalaradTaSSLOutputPassword | read-write | current | The passwords for the output private key file. |
| 1.3.6.1.4.1.664.5.63.160.50.13 | ScalaradTaSSLCertificateCountry | read-write | current | SSL certificate country. |
| 1.3.6.1.4.1.664.5.63.160.50.15 | ScalaradTaSSLCertificateStateOrProvince | read-write | current | SSL certificate State or Province. |
| 1.3.6.1.4.1.664.5.63.160.50.17 | ScalaradTaSSLCertificateChallengePassword | read-write | current | SSL challenge password. |
| 1.3.6.1.4.1.664.5.63.160.50.19 | ScalaradTaSSLCertificateLocality | read-write | current | SSL certificate Locality (eg, city). |
| 1.3.6.1.4.1.664.5.63.160.50.21 | ScalaradTaSSLCertificateOrganization | read-write | current | SSL certificate Organization. |
| 1.3.6.1.4.1.664.5.63.160.50.23 | ScalaradTaSSLCertificateOrganizationalUnitName | read-write | current | SSL certificate Organization Unit Name. |
| 1.3.6.1.4.1.664.5.63.160.50.25 | ScalaradTaSSLCertificateCommonName | read-write | current | SSL Common Name (e.g., fully qualified domain name of the server to be secured)'' since, the common name generally corresponds to the server's name when genera… |
| 1.3.6.1.4.1.664.5.63.160.50.27 | ScalaradTaSSLCertificateEmailAddress | read-write | current | SSL Email address of the SSL certificate distinguished name |
| 1.3.6.1.4.1.664.5.63.160.50.29 | ScalaradTaGenerateNewSSLKeys | read-write | current | Reset the controller and genrerate new SSL keys using the current settings. |
| 1.3.6.1.4.1.664.5.63.160.50.30 | ScalaradTaGenerateNewSSLCertificateRequest | read-write | current | Initiate generation of a new SSL Certificate Request. |
| 1.3.6.1.4.1.664.5.63.160.50.31 | ScalaradTaSSLuseImportCertificate | read-write | current | When set to disable, the controller will use the self-signed certificate. When set to enable, the controller will use the imported signed certificate (if avail… |
| 1.3.6.1.4.1.664.5.63.160.50.100 | NodeadTaSSLRemoteKeyDownload | |||
| 1.3.6.1.4.1.664.5.63.160.50.100.3 | ScalaradTaSSLRemotePrivateKeyFileName | read-write | current | SSL Remote Private key file name to download. This file will replace the controller generated SSL Private Key File. |
| 1.3.6.1.4.1.664.5.63.160.50.100.5 | ScalaradTaSSLRemotedPublicKeyFileName | read-write | current | SSL Remote Private key file name to download. This file will replace the controller generated SSL Public Key File. |
| 1.3.6.1.4.1.664.5.63.160.50.100.7 | ScalaradTaSSLRemoteCertificateFileName | read-write | current | SSL Remote Private key file name to download. This file will replace the controller generated SSL self signed Certificate Key File. |
| 1.3.6.1.4.1.664.5.63.160.50.100.8 | ScalaradTaSSLRemoteKeysDownLoadStatus | read-write | current | SSL Remote keys download status. |
| 1.3.6.1.4.1.664.5.63.160.50.100.9 | ScalaradTaSSLCertificateRequestFileName | read-write | current | File name to use while exporting a certificate request. |
| 1.3.6.1.4.1.664.5.63.160.50.100.10 | ScalaradTaSSLCertificateRequestExport | read-write | current | Used to initiate an certificate request export. |
| 1.3.6.1.4.1.664.5.63.160.50.100.11 | ScalaradTaSSLCertificateImport | read-write | current | Initiate the import operation for the signed certificate. The file indicated by adTaSSLRemoteCertificateFileName will be transferred to the controller using th… |
| 1.3.6.1.4.1.664.5.63.160.50.100.12 | ScalaradTaSSLCertificateImportStatus | read-only | current | SSL Certificate Import status. This status indicates whether or not a certificate was imported successfully and is ready to be used, if desired. |
| 1.3.6.1.4.1.664.5.63.160.50.100.13 | ScalaradTaSSLDownLoadRemoteKeys | read-write | current | SSL key type to generate and use. |
| 1.3.6.1.4.1.664.5.63.160.50.100.14 | ScalaradTaSSLCertificateSigningRequestStatus | read-only | current | SSL Certificate Signing Request Status. This status Indicates whether a certificate signing request is ready and available for export. |
| 1.3.6.1.4.1.664.5.63.160.50.100.15 | ScalaradTaSSLCertificateSignRequestExportStatus | read-only | current | This OID will return a formatted string describing the most recent SSL Certificate Signing Request Remote File Export operation status. |
| 1.3.6.1.4.1.664.5.63.160.50.100.16 | ScalaradTaSSLSignedCertificateImportStatus | read-only | current | This OID will return a formatted string describing the most recent SSL Signed Certificate Remote File Import operation status. |
| 1.3.6.1.4.1.664.5.63.170 | NodeadTaSysCtrlReboot | |||
| 1.3.6.1.4.1.664.5.63.170.0 | NodeadTaSysCtrlRebootTraps | |||
| 1.3.6.1.4.1.664.5.63.170.0.1006368 | NotificationadTaSysCtrlRebootException | current | System Controlled Reboot exception. | |
| 1.3.6.1.4.1.664.5.63.170.1 | ScalaradTaSysCtrlRebootOperMode | read-write | current | SCR Operating mode. |
| 1.3.6.1.4.1.664.5.63.170.2 | ScalaradTaSysCtrlRebootSchedDateTime | read-write | current | Future date/time to perform a scheduled SCR operation if SCR OperMode is set to scheduled, otherwise this value is ignored. Typical format of date/time strings… |
| 1.3.6.1.4.1.664.5.63.170.3 | ScalaradTaSysCtrlRebootInitiate | read-write | current | This OID instructs the System Controlled Reboot (SCR) subsystem to reboot all modules in the sstem if any post-AutoUpgrade reboots have been deferred. This is … |
| 1.3.6.1.4.1.664.5.63.170.4 | ScalaradTaSysCtrlRebootLastStatus | read-only | current | Returns the last SCR status string. Error statuses are persistent. This string generally begin with a single-word state such as Idle, Busy, Error, and are opti… |
| 1.3.6.1.4.1.664.5.63.170.5 | ScalaradTaSysCtrlRebootArmedStatus | read-write | current | Returns the Armed Status of the SCR one-shot. Setting the value to armed will change the status to armed. Currently, setting the value to notArmed will return … |
| 1.3.6.1.4.1.664.5.63.170.6 | ScalaradTaSysCtrlRebootMode | read-write | current | SCR reboot mode. concurrentMode will reboot cards in concurrent order, without considering redundancy status. redundancyMode will reboot cards in concurrent or… |
| 1.3.6.1.4.1.664.5.63.180 | NodeadTaSysAlarmVarbinds | |||
| 1.3.6.1.4.1.664.5.63.180.3 | ScalaradTaDataLossDescription | accessible-for-notify | current | Description of SCM data loss or coruption. |
| 1.3.6.1.4.1.664.5.63.190 | NodeadTaSysCtrlVLANBridge | |||
| 1.3.6.1.4.1.664.5.63.190.1 | ScalaradTaSysCtrlVLANBridgeMode | read-write | current | Enable VLAN bridging mode. |
| 1.3.6.1.4.1.664.5.63.190.2 | ScalaradTaSysCtrlVLANBridgeInterface | read-write | current | Select the interface to perform bridging. |