ALCATEL-ENT1-INLINE-POWER-MIB
73 objects
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): Propietary InLinePower Extensions MIB definitions The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
Imported Objects
| ALCATEL-ENT1-BASE | softentIND1InLinePower |
| POWER-ETHERNET-MIB | pethMainPseEntry pethMainPsePower pethPsePortEntry pethPsePortGroupIndex pethPsePortIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6486.801.1.2.1.27.1 | IdentityalcatelIND1INLINEPOWERMIB | This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): Propietary InLinePower … | ||
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.0 | NodealaPethNotificationObjects | |||
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.0.1 | NotificationalaPethPwrSupplyConflictTrap | current | Power supply type conflict trap. | |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.0.2 | NotificationalaPethPwrSupplyNotSupportedTrap | current | Power supply not supported trap. | |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.0.3 | NotificationpethMainPowerUsageNIFailNotification | current | NI cannot be powered trap | |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1 | NodealaPethObjects | |||
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.1 | TablealaPethPsePortTable | not-accessible | current | A table of objects that augments the standard pethPsePortTable entry. |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.1.1 | RowalaPethPsePortEntry | not-accessible | current | A set of objects that display and control the power characteristics of a power Ethernet PSE port. |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.1.1.1 | ColumnalaPethPsePortPowerMaximum | read-write | current | This object controls maximum amount of power per port. |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.1.1.2 | ColumnalaPethPsePortPowerActual | read-only | current | This object contains the actual amount of power used by a port |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.1.1.3 | ColumnalaPethPsePortPowerStatus | read-only | current | This object contains the power status of a port |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.1.1.4 | ColumnalaPethPsePortPowerClass | read-only | current | This object controls class of poe device attached on a port. class0 - The device can draw PD power from 0.44W to 12.95W and current less than 5.0 mA. class1 - … |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.2 | TablealaPethMainPseTable | not-accessible | current | This table augments the standard table PethMainPseTable by allowing the admin status for a group to be set to on/off as well as showing the values for the max … |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.2.1 | RowalaPethMainPseEntry | not-accessible | current | A set of objects that display and control the Main power of a PSE. |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.2.1.1 | ColumnalaPethMainPseAdminStatus | read-write | current | The object is used to set the status of the main PSE to ON or OFF. |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.2.1.2 | ColumnalaPethMainPseMaxPower | read-write | current | The maximum amount of power allowed for main PSE. |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.2.1.3 | ColumnalaPethMainPsePriorityDisconnect | read-write | current | The object is used to set the priority disconnect of the main PSE to Enabled or Disable. |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.2.1.4 | ColumnalaPethMainPseCapacitorDetect | read-write | current | The object is used to enable or disable the PowerDsine Capacitor detection method. |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.2.1.5 | ColumnalaPethMainPsePriority | read-write | current | The object is set the power down priority for the slot |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.2.1.6 | ColumnalaPethMainPseComboPort | read-write | current | The object is used to set the combo port option of the main PSE to Enable or Disable. |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.2.1.7 | ColumnalaPethMainPseClassDetection | read-write | current | The object is used to set the class detection of the main PSE to Enabled or Disable. |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.3 | TablealaPethMainChassisTable | not-accessible | current | A table of objects that display and control power characteristics per chassis. |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.3.1 | RowalaPethMainChassisEntry | not-accessible | current | A set of objects that display and control the power characteristics of a power Ethernet PSE chassis. |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.3.1.1 | ColumnalaPethMainChassisId | not-accessible | current | The virtual chassis ID for this entry. |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.3.1.2 | ColumnalaPethMainChassisPowerRedundancy | read-write | current | This object controls power supply redundancy for the power Ethernet PSE slots in a chassis. |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.3.1.3 | ColumnalaPethMainChassisDynamicPowerManagement | read-write | current | This object controls dynamic power management for Ethernet PSE slots in a chassis. |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.3.1.4 | ColumnalaPethMainChassisNumberOfPowerSupply | read-only | current | The number of power supplies this chassis. |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.3.1.5 | ColumnalaPethMainChassisAvailableReservePower | read-only | current | Available reserve power this chassis. |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.4 | TablealaPethPowerRuleTable | not-accessible | current | A list of lanpower power rules that define specific times at which to power on/off port(s) associated in alaPethPowerPortTable with a policy defined in alaPeth… |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.4.1 | RowalaPethPowerRuleEntry | not-accessible | current | A lanpower power rule to be bound to a policy. |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.4.1.1 | ColumnalaPethPowerRuleName | read-create | current | The name of the power policy rule of this entry. |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.4.1.2 | ColumnalaPethPowerRuleAdminStatus | read-create | current | Whether this policy rule is enforced when enabled(1) or ignored when disabled(2). |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.4.1.3 | ColumnalaPethPowerRulePowerStatus | read-create | current | Whether to power on(1) or off(2) the port(s) associated with the lanpower policy this rule is bound to. |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.4.1.4 | ColumnalaPethPowerRuleAtMinute | read-create | current | At what minute of every hour (0..59) to power on/off the port(s) associated with the lanpower policy this rule is bound to. The value -1 is for Not Applicable.… |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.4.1.5 | ColumnalaPethPowerRuleAtTime | read-create | current | At what time minute of the day (0..1439), to power on/off the port(s) associated with the lanpower policy this rule is bound to. The value -1 is for Not Applic… |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.4.1.6 | ColumnalaPethPowerRuleDaysOfWeek | read-create | current | On which days of the week to power on(1) or off(2) the port(s) associated with the lanpower policy this rule is bound to. Mutually exclusive with alaPethPowerR… |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.4.1.7 | ColumnalaPethPowerRuleDaysOfMonth | read-create | current | On which days of the month to power on(1) or off(2) the port(s) associated with the lanpower policy this rule is bound to. Mutually exclusive with alaPethPower… |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.4.1.8 | ColumnalaPethPowerRuleMonths | read-create | current | On which months to power on(1) or off(2) the port(s) associated with the lanpower policy this rule is bound to. Default is every month. |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.4.1.9 | ColumnalaPethPowerRuleTimezone | read-create | current | The timezone to use when activating the rule minute/time. localServer(1) is the time given by the local server, originatorServer(2) is the time given by the or… |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.4.1.10 | ColumnalaPethPowerRuleRowStatus | read-create | current | Create or delete a lanpower policy rule. |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.5 | TablealaPethPowerPolicyTable | not-accessible | current | A list of lanpower power policies to which rules defined in alaPethPowerRuleTable are bound to. Rules schedule power on/off of ports associated with policies d… |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.5.1 | RowalaPethPowerPolicyEntry | not-accessible | current | A power policy to which a rule is bound. |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.5.1.1 | ColumnalaPethPowerPolicyName | not-accessible | current | The name of the power policy of this entry. |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.5.1.2 | ColumnalaPethPowerPolicyRowStatus | read-create | current | Create or delete a lanpower policy. |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.6 | TablealaPethPowerPortTable | not-accessible | current | A list of lanpower ports associated with a policy defined in alaPethPowerPolicyTable to which rules defined in alaPethPowerRuleTable are bound to. Rules schedu… |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.6.1 | RowalaPethPowerPortEntry | not-accessible | current | A port associated with a power policy. |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.6.1.1 | ColumnalaPethPowerPortPolicyName | read-create | current | The name of the power policy of this port. Cannot be modified - first delete entry with old name and then create entry with new name. |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.6.1.2 | ColumnalaPethPowerPortRowStatus | read-create | current | Create or delete a port lanpower policy. |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.7 | TablealaPethPowerSlotTable | not-accessible | current | A list of lanpower slots associated with a policy defined in alaPethPowerPolicyTable to which rules defined in alaPethPowerRuleTable are bound to. Rules schedu… |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.7.1 | RowalaPethPowerSlotEntry | not-accessible | current | A slot associated with a power policy. |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.7.1.1 | ColumnalaPethPowerSlotPolicyName | read-create | current | The name of the power policy defined in alaPethPowerPolicyTable to associate with this slot. |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.7.1.2 | ColumnalaPethPowerSlotRowStatus | read-create | current | Associate or disassociate slot to lanpower policy. |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.8 | NodealaPethUpdate | |||
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.8.1 | ScalaralaPethUpdatePortGroupIndex | read-write | current | The pethPsePortGroupIndex slot to perform the update on. To update all slots, use reserved value of zero (0). The default value (no slot) is negative one (-1). |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.8.2 | ScalaralaPethUpdateFilename | read-write | current | The lanpower update filename to use. |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.8.3 | ScalaralaPethUpdateAction | read-write | current | The current update action, set to doUpdate(2) to start the update operation. It will automatically be restored to the default no operation value noOp(1). |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.8.4 | ScalaralaPethUpdateStatus | read-only | current | Status of a lanpower update action. In the case of doneNotOk, further information can be obtained from alaPethUpdateErrorCode. In the case of updating all slot… |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.8.5 | ScalaralaPethUpdateErrorCode | read-only | current | Error codes for alaPethUpdateStatus doneNotOk(3) for the last alaPethUpdateAction operation; otherwise, it defaults to noError(1). In the case of updating all … |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.1.8.6 | ScalaralaPethUpdateErrorString | read-only | current | Any further details of alaPethUpdateErrorCodefor alaPethUpdateStatus doneNotOk(3) for the last alaPethUpdateAction operation. In the case of updating all slots… |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.2 | NodealaPethConformance | |||
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.2.1 | NodealaPethCompliances | |||
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.2.1.1 | CompliancealaPethCompliance | current | Describes the requirements for conformance to the Alcatel Power Ethernet MIB. | |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.2.1.2 | CompliancealaPethPseCompliance | current | Describes the requirements for conformance to the PSE | |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.2.2 | NodealaPethGroups | |||
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.2.2.1 | GroupalaPethPsePortGroup | current | The pethPsePortGroup is mandatory for systems which implement PSE ports. | |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.2.2.2 | GroupalaPethMainPseGroup | current | Main PSE Objects. | |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.2.2.3 | GroupalaPethMainChassisGroup | current | Main Chassis Objects. | |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.2.2.4 | GroupalaPethPowerRuleGroup | current | Power Policy Rule Objects. | |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.2.2.5 | GroupalaPethPowerPolicyGroup | current | Power Policy Objects. | |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.2.2.6 | GroupalaPethPowerPortGroup | current | Power Policy Port Objects. | |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.2.2.7 | GroupalaPethPowerSlotGroup | current | Power Policy Slot Objects. | |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.2.2.8 | GroupalaPethUpdateGroup | current | Power Update Objects. | |
| 1.3.6.1.4.1.6486.801.1.2.1.27.1.2.2.9 | GrouppethTrapsGroup | current | Notifications for PETH MIB |