ALCATEL-ENT1-ISIS-SPB-MIB
219 objects
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): Configuration Of Global OSPF Configuration Parameters. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
Imported Objects
| ALCATEL-ENT1-BASE | routingIND1IsisSpb |
| IEEE8021-CFM-MIB | VlanIdOrNone |
| IEEE8021-TC-MIB | IEEE8021BridgePortNumber IEEE8021PbbIngressEgress IEEE8021PbbServiceIdentifierOrUnassigned |
| IF-MIB | InterfaceIndexOrZero |
| Q-BRIDGE-MIB | VlanId |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TimeInterval TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1 | IdentityalcatelIND1IsisSpbMib | This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): Configuration Of Global… | ||
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1 | NodealcatelIND1IsisSpbMibObjects | |||
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1 | NodealcatelIND1IsisSpbSys | |||
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.1 | ScalaralcatelIND1IsisSpbSysControlBvlan | read-write | current | The vlan tag applied to ISIS-SPB frames. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.2 | ScalaralcatelIND1IsisSpbSysAdminState | read-write | current | Controls the operational state of the ISIS-SPB protocol. Default value is disable(2). |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.3 | ScalaralcatelIND1IsisSpbSysAreaAddress | read-write | current | The three byte IS-IS Area Address to join. Normally SPB will use area 00-00-00 however if SPB is being used in conjunction with IPV4/V6 it may operate using th… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.4 | ScalaralcatelIND1IsisSpbSysId | read-only | current | SYS ID used for all SPB instances on this bridge. A six byte network wide unique identifier. cf. ieee8021SpbSysId |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.5 | ScalaralcatelIND1IsisSpbSysControlAddr | read-write | current | Group MAC that the ISIS control plane will use. SPB may use a number of different addresses for SPB Hello and LSP exchange. Section 27.2, 8.13.1.5 and Table 8-… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.6 | ScalaralcatelIND1IsisSpbSysName | read-only | current | Name to be used to refer to this SPB bridge. This is advertised in IS-IS and used for management. cf. ieee8021SpbSysName |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.7 | ScalaralcatelIND1IsisSpbSysBridgePriority | read-write | current | This is a 16 bit quantity which ranks this SPB Bridge relative to others when breaking ties. This priority is the high 16 bits of the Bridge Identifier. Its im… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.8 | ScalaralcatelIND1IsisSpbmSysSPSourceId | read-write | current | The Shortest Path Source Identifier. It is the high order 3 bytes for Group Address DA from this bridge. Note that only the 20 bits not including the top 4 bit… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.9 | ScalaralcatelIND1IsisSpbvSysMode | read-write | current | Indication of supporting SPBV mode auto(=1)/manual(=2) auto => enable SPBV mode and auto allocate SPVIDs. manual => enable SPBV mode and manually assign SPVIDs… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.10 | ScalaralcatelIND1IsisSpbmSysMode | read-write | current | Indication of supporting SPBM mode auto(=1)/manual(=2) auto => enable SPBM mode and auto allocate SPsourceID. manual => enable SPBM mode and manually assign SP… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.11 | ScalaralcatelIND1IsisSpbSysDigestConvention | read-write | current | The Agreement Digest convention setting off(=1)/loopFreeBoth(=2)/loopFreeMcastOnly(=3) off => disable agreement digest checking in hellos loopFreeBoth => block… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.12 | ScalaralcatelIND1IsisSpbSysSetOverload | read-write | current | Administratively set the overload bit. The overload bit will continue to be set if the implementation runs out of memory, independent of this variable. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.13 | ScalaralcatelIND1IsisSpbSysOverloadTimeout | read-write | current | The value of alcatelIND1IsisSpbSysOverloadTimeout is the amount of time, in seconds, the router operates in the overload state before attempting to reestablish… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.14 | ScalaralcatelIND1IsisSpbSysOverloadOnBoot | read-write | current | The value of alcatelIND1IsisSpbSysOverloadOnBoot specifies if the router should be in overload state right after the boot up process. If the alcatelIND1IsisSpb… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.15 | ScalaralcatelIND1IsisSpbSysOverloadOnBootTimeout | read-write | current | The value of alcatelIND1IsisSpbSysOverloadOnBootTimeout is the amount of time, in seconds for which the router operates in the overload state before attempting… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.16 | ScalaralcatelIND1IsisSpbSysOverloadStatus | read-only | current | Indicates whether or not this isis-spb instance is in overload state. When has the value 'notInOverload', the IS-IS level is normal state. When the value is 'd… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.17 | ScalaralcatelIND1IsisSpbSysLastEnabledTime | read-only | current | Contains the sysUpTime value when alcatelIND1IsisSpbSysAdminState was last set to enabled (1) to run the IS-IS protocol. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.18 | ScalaralcatelIND1isisSpbSysLastSpfRun | read-only | current | Contains the sysUpTime value when the last SPF run was performed for this instance of the IS-IS protocol. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.19 | ScalaralcatelIND1IsisSpbSysNumLSPs | read-only | current | Specifies the number of LSPs in the database. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.20 | ScalaralcatelIND1IsisSpbSysLastEnabledTimeStamp | read-only | current | Contains the sysUpTime value when alcatelIND1IsisSpbSysAdminState was last set to enabled (1) to run the IS-IS protocol. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.21 | ScalaralcatelIND1isisSpbSysLastSpfRunTimeStamp | read-only | current | Contains the sysUpTime value when the last SPF run was performed for this instance of the IS-IS protocol. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.2 | NodealcatelIND1IsisSpbProtocolConfig | |||
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.2.1 | ScalaralcatelIND1IsisSpbProtocolSpfMaxWait | read-write | current | The value of alcatelIND1IsisSpbProtocolSpfMaxWait defines the Maximum interval between two consecutive spf calculations in milliseconds. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.2.2 | ScalaralcatelIND1IsisSpbProtocolSpfInitialWait | read-write | current | The value of alcatelIND1IsisSpbProtocolSpfInitialWait defines the initial SPF calculation delay (in milliseconds) after a topology change. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.2.3 | ScalaralcatelIND1IsisSpbProtocolSpfSecondWait | read-write | current | The value of alcatelIND1IsisSpbProtocolSpfSecondWait defines the hold time between the first and second SPF calculation (in milliseconds). Subsequent SPF runs … |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.2.4 | ScalaralcatelIND1IsisSpbProtocolLspMaxWait | read-write | current | The value of alcatelIND1IsisSpbProtocolLspWait defines the maximum interval (in milliseconds) between two consecutive ocurrences of an LSP being generated. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.2.5 | ScalaralcatelIND1IsisSpbProtocolLspInitialWait | read-write | current | The value of alcatelIND1IsisSpbProtocolLspInitialWait defines the initial LSP generation delay (in milliseconds). |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.2.6 | ScalaralcatelIND1IsisSpbProtocolLspSecondWait | read-write | current | The value of alcatelIND1IsisSpbProtocolLspInitialWait defines the hold time between the first and second LSP generation (in milliseconds). |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.2.7 | ScalaralcatelIND1IsisSpbProtocolGracefulRestart | read-write | current | The value of alcatelIND1IsisSpbProtocolGracefulRestart specifies whether the graceful restart is enabled or disabled for this instance of IS-IS. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.2.8 | ScalaralcatelIND1IsisSpbProtocolGRHelperMode | read-write | current | The value of alcatelIND1IsisSpbProtocolGRHelperMode specifies whether the graceful restart helper mode is enabled or disabled for this instance of IS-IS. alcat… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3 | TablealcatelIND1IsisSpbAdjStaticTable | not-accessible | current | A table containing the SPB configuration data for a neighbor. cf. ieee8021SpbAdjStaticTable |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1 | RowalcatelIND1IsisSpbAdjStaticTableEntry | not-accessible | current | This table can be used to display the interfaces and metrics of a neighbor bridge. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1.1 | ColumnalcatelIND1IsisSpbAdjStaticEntryTopIx | not-accessible | current | The ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances wi… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1.2 | ColumnalcatelIND1IsisSpbAdjStaticEntryIfIndex | not-accessible | current | The System interface/index which defines this adjacency. A value of 0 is a wildcard for any interface on which SPB Operation is supported. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1.3 | ColumnalcatelIND1IsisSpbAdjStaticEntryMetric | read-create | current | The alcatelIND1IsisSpb metric (incremental cost) to this peer. The contribution of this link to total path cost. Recommended values are inversely proportional … |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1.4 | ColumnalcatelIND1IsisSpbAdjStaticEntryHelloInterval | read-create | current | Maximum period, in seconds, between IIH PDUs. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1.5 | ColumnalcatelIND1IsisSpbAdjStaticEntryHelloMultiplier | read-create | current | This value is multiplied by the corresponding HelloInterval and the result in seconds (rounded up) is used as the holding time in transmitted hellos, to be use… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1.6 | ColumnalcatelIND1IsisSpbAdjStaticEntryIfAdminState | read-create | current | The administrative state of this interface/port. Up is the default. This object is persistent. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1.7 | ColumnalcatelIND1IsisSpbAdjStaticEntryRowStatus | read-create | current | The object indicates the status of an entry, and is used to create/delete entries. This object is persistent. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1.8 | ColumnalcatelIND1IsisSpbAdjStaticEntryCircuitId | read-only | current | The local circuit id. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1.9 | ColumnalcatelIND1IsisSpbAdjStaticEntryIfOperState | read-only | current | The current operational state of IS-IS protocol on this interface. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1.10 | ColumnalcatelIND1IsisSpbAdjStaticEntryAFDConfig | read-only | current | Configuration is made by admin or auto-fabric on this interface |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.4 | TablealcatelIND1IsisSpbEctStaticTable | not-accessible | current | The Equal Cost Tree (ECT) static configuration table. cf. ieee8021SpbEctStaticTable |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.4.1 | RowalcatelIND1IsisSpbEctStaticTableEntry | not-accessible | current | The Equal Cost Tree static configuration Table defines the ECT ALGORITHM for the Base VID and if SPBV is used for the SPVID. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.4.1.1 | ColumnalcatelIND1IsisSpbEctStaticEntryTopIx | not-accessible | current | The ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances wi… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.4.1.2 | ColumnalcatelIND1IsisSpbEctStaticEntryBaseVid | not-accessible | current | Base VID to use for this ECT-ALGORITHM. Traffic B-VID (SPBM) or Management VID (SPBV). A Base VID value of 4095 is a wildcard for any Base VID assigned to SPB … |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.4.1.3 | ColumnalcatelIND1IsisSpbEctStaticEntryEctAlgorithm | read-create | current | This identifies the tie-breaking algorithms used in Shortest Path Tree computation. Values range from 00-80-c2-01 to 00-80-c2-16 for 802.1 for each the 16 ECT … |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.4.1.4 | ColumnalcatelIND1IsisSpbvEctStaticEntrySpvid | read-create | current | If SPBV mode this is the VID originating from this bridge. Must be set = 0 if SPVID Auto-allocation is required. Otherwise in SPBM this is empty, should be set… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.4.1.5 | ColumnalcatelIND1IsisSpbEctStaticEntryRowStatus | read-create | current | The object indicates the status of an entry, and is used to create/delete entries. This object is persistent. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.4.1.6 | ColumnalcatelIND1IsisSpbEctStaticEntryMulticastMode | read-create | current | This identifies the tandem multicast-mode of this bvlan. A value of 0 indicates (S,G) mode, while a value of 1 indicates (*,G) mode. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.4.1.7 | ColumnalcatelIND1IsisSpbEctStaticEntryRootBridgeSysName | read-only | current | Name of the root bridge. This object's value has meaning only when the bvlan is in (*,G) mode (e.g. alcatelIND1IsisSpbEctStaticEntryMulticastMode is set to gmo… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.4.1.8 | ColumnalcatelIND1IsisSpbEctStaticEntryRootBridgeSysMac | read-only | current | Mac address of the root bridge. This object's value has meaning only when the bvlan is in (*,G) mode (e.g. alcatelIND1IsisSpbEctStaticEntryMulticastMode is set… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5 | TablealcatelIND1IsisSpbAdjDynamicTable | not-accessible | current | The Adjacency table. cf. ieee8021SpbAdjDynamicTable cf. show ip isis adjacency |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1 | RowalcatelIND1IsisSpbAdjDynamicEntry | not-accessible | current | This table is used to determine operational values of digests and interfaces of neighbor bridges. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.1 | ColumnalcatelIND1IsisSpbAdjDynamicEntryTopIx | not-accessible | current | The ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances wi… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.2 | ColumnalcatelIND1IsisSpbAdjDynamicEntryIfIndex | not-accessible | current | System interface/index which defines this adjacency A value of 0 is a wildcard for any interface on which SPB Operation is enabled. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.3 | ColumnalcatelIND1IsisSpbAdjDynamicEntryPeerSysId | not-accessible | current | The SPB System Identifier of this peer. This is used to identify a neighbor uniquely. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.4 | ColumnalcatelIND1IsisSpbAdjDynamicEntryAdjState | read-only | current | The state of the adjacency. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.5 | ColumnalcatelIND1IsisSpbAdjDynamicEntryAdjUpTime | read-only | current | The time when the adjacency last entered the up state. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.6 | ColumnalcatelIND1IsisSpbAdjDynamicEntryHoldRemaining | read-only | current | The remaining hold time in seconds. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.7 | ColumnalcatelIND1IsisSpbAdjDynamicEntryHoldTimer | read-only | current | The holding time in seconds for this adjacency updated from received IIH PDUs. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.8 | ColumnalcatelIND1IsisSpbAdjDynamicEntryNbrExtLocalCircuitId | read-only | current | The extended circuit id advertised by the peer. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.9 | ColumnalcatelIND1IsisSpbAdjDynamicEntryNeighPriority | read-only | current | Priority of the neighboring Intermediate System for becoming the Designated Intermediate System. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.10 | ColumnalcatelIND1IsisSpbAdjDynamicEntryPeerSysName | read-only | current | IS-IS system name of peer. This is the ASCII name assigned to the bridge to aid management. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.11 | ColumnalcatelIND1IsisSpbAdjDynamicEntryRestartStatus | read-only | current | The graceful restart status of the adjacency. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.12 | ColumnalcatelIND1IsisSpbAdjDynamicEntryRestartSupport | read-only | current | Indicates whether adjacency supports ISIS graceful restart. If 'true', the adjacency supports graceful restart. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.13 | ColumnalcatelIND1IsisSpbAdjDynamicEntryRestartSuppressed | read-only | current | Indicates if the adjacency has requested this router to suppress advertisement of the adjacency in this router's LSPs. If 'true' the adjacency has requested to… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.14 | ColumnalcatelIND1IsisSpbAdjDynamicEntryAdjUpTimeStamp | read-only | current | The sysUpTime value when the adjacency last entered the up state. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.6 | TablealcatelIND1IsisSpbNodeTable | not-accessible | current | The Node table. cf. show ip isis nodes |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.6.1 | RowalcatelIND1IsisSpbNodeTableEntry | not-accessible | current | This table can be used to display information about known bridges. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.6.1.1 | ColumnalcatelIND1IsisSpbNodeTopIx | not-accessible | current | The ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances wi… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.6.1.2 | ColumnalcatelIND1IsisSpbNodeSysId | not-accessible | current | SYS ID used for all SPB instances on the bridge. A six byte network wide unique identifier. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.6.1.3 | ColumnalcatelIND1IsisSpbNodeSysName | read-only | current | Name to be used to refer to the SPB bridge. This is advertised in IS-IS and used for management. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.6.1.4 | ColumnalcatelIND1IsisSpbNodeSPSourceId | read-only | current | The Shortest Path Source Identifier. It is the high order 3 bytes for Group Address DA from the bridge. Note that only the 20 bits not including the top 4 bits… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.6.1.5 | ColumnalcatelIND1IsisSpbNodeBridgePriority | read-only | current | This is a 16 bit quantity which ranks the SPB Bridge relative to others when breaking ties. This priority is the high 16 bits of the Bridge Identifier. Its imp… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.7 | TablealcatelIND1IsisSpbUnicastTable | not-accessible | current | The unicast table. cf. show ip isis unicast-table |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.7.1 | RowalcatelIND1IsisSpbUnicastTableEntry | not-accessible | current | This table can be used to display information about unicast targets. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.7.1.1 | ColumnalcatelIND1IsisSpbUnicastTopIx | not-accessible | current | The ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances wi… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.7.1.2 | ColumnalcatelIND1IsisSpbUnicastBvlan | not-accessible | current | The bvlan associated with the unicast target. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.7.1.3 | ColumnalcatelIND1IsisSpbUnicastSysMac | not-accessible | current | The mac address of the bridge associated with the unicast target. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.7.1.4 | ColumnalcatelIND1IsisSpbUnicastSysName | read-only | current | Name of the bridge associated with the unicast target. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.7.1.5 | ColumnalcatelIND1IsisSpbUnicastOutboundIfIndex | read-only | current | Outbound interface used to reach the unicast target. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.8 | TablealcatelIND1IsisSpbMulticastTable | not-accessible | current | The multicast table. cf. show ip isis multicast-table |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.8.1 | RowalcatelIND1IsisSpbMulticastTableEntry | not-accessible | current | This table can be used to display the multicast table for SPB |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.8.1.1 | ColumnalcatelIND1IsisSpbMulticastTableEntryTopIx | not-accessible | current | The ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances wi… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.8.1.2 | ColumnalcatelIND1IsisSpbMulticastTableEntryBvlan | not-accessible | current | Bvlan of the multicast entry. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.8.1.3 | ColumnalcatelIND1IsisSpbMulticastTableEntryMulticastMac | not-accessible | current | Multicast destination MAC of the multicast entry. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.8.1.4 | ColumnalcatelIND1IsisSpbMulticastTableEntryIfIndexOutbound | not-accessible | current | Outbound interface index of the multicast entry, zero means local node is multicast receiver |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.8.1.5 | ColumnalcatelIND1IsisSpbMulticastTableEntrySrcMac | read-only | current | System MAC of the multicast source, all zero means any MAC. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.8.1.6 | ColumnalcatelIND1IsisSpbMulticastTableEntryIfIndexInbound | read-only | current | Inbound interface index of the multicast source, zero means local node is multicast source |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.8.1.7 | ColumnalcatelIND1IsisSpbMulticastTableEntrySysName | read-only | current | System name of multicast source |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.8.1.8 | ColumnalcatelIND1IsisSpbMulticastTableEntryIsid | read-only | current | The service identifier, e.g. isid number of the multicast entry. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9 | TablealcatelIND1IsisSpbLSPTable | not-accessible | current | The LSP table (database). cf. show ip isis database |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1 | RowalcatelIND1IsisSpbLSPEntry | not-accessible | current | Each row entry in the alcatelIND1IsisSpbLSPTable represents an LSP in the LSP database. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.1 | ColumnalcatelIND1IsisSpbLSPTopIx | not-accessible | current | The ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances wi… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.2 | ColumnalcatelIND1IsisSpbLSPId | not-accessible | current | The LSP Id. The format is 6 octets of ajacency system-id followed by 1 octet LanId and 1 octet LSP Number. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.3 | ColumnalcatelIND1IsisSpbLSPSeq | read-only | current | The sequence number of an LSP. The sequence number is a four byte quantity that represents the version of an LSP. The higher the sequence number, the more up t… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.4 | ColumnalcatelIND1IsisSpbLSPChecksum | read-only | current | The checksum of contents of LSP from the SourceID field in the LSP till the end. The checksum is computed using the Fletcher checksum algorithm. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.5 | ColumnalcatelIND1IsisSpbLSPLifetimeRemain | read-only | current | Remaining lifetime of this LSP. This is a decrementing counter that decrements in seconds. When the remaining lifetime becomes zero, the contents of the LSP sh… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.6 | ColumnalcatelIND1IsisSpbLSPVersion | read-only | current | The version of the ISIS protocol that generated the LSP. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.7 | ColumnalcatelIND1IsisSpbLSPPktType | read-only | current | Packet type for instance Hello PDUs, LSPs, CSNPs or PSNPs. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.8 | ColumnalcatelIND1IsisSpbLSPPktVersion | read-only | current | The version of the ISIS protocol that generated the Packet. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.9 | ColumnalcatelIND1IsisSpbLSPMaxArea | read-only | current | Maximum number of areas supported by the originator of the LSP. A value of 0 indicates a default of 3 areas. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.10 | ColumnalcatelIND1IsisSpbLSPSysIdLen | read-only | current | The length of the system-id as used by the originator. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.11 | ColumnalcatelIND1IsisSpbLSPAttributes | read-only | current | Attributes associated with the LSP. These include the attached bit, overload bit, IS type of the system originating the LSP and the partition repair capability… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.12 | ColumnalcatelIND1IsisSpbLSPUsedLen | read-only | current | The used length for the LSP. For an LSP that is not self originated, the used length is always equal to alloc len. For self originated LSPs, the used length is… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.13 | ColumnalcatelIND1IsisSpbLSPAllocLen | read-only | current | The length allocated for the LSP to be stored. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.14 | ColumnalcatelIND1IsisSpbLSPBuff | read-only | current | The LSP as it exists in the LSP database. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.10 | TablealcatelIND1IsisSpbMulticastSourceTable | not-accessible | current | The multicast source table. cf. show ip isis multicast-sources |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.10.1 | RowalcatelIND1IsisSpbMulticastSourceEntry | not-accessible | current | This table can be used to display information about multicast sources. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.10.1.1 | ColumnalcatelIND1IsisSpbMulticastSourceTopIx | not-accessible | current | The ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances wi… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.10.1.2 | ColumnalcatelIND1IsisSpbMulticastSourceSysMac | not-accessible | current | The mac address of the bridge associated with the multicast source. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.10.1.3 | ColumnalcatelIND1IsisSpbMulticastSourceBvlan | not-accessible | current | The bvlan associated with the multicast source. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.10.1.4 | ColumnalcatelIND1IsisSpbMulticastSourceSysName | read-only | current | Name of the bridge associated with the multicast source. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.10.1.5 | ColumnalcatelIND1IsisSpbMulticastSourceReachable | read-only | current | True if we have a path to the multicast source. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.11 | TablealcatelIND1IsisSpbSpfTable | not-accessible | current | The spf table. cf. show spb isis spf |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.11.1 | RowalcatelIND1IsisSpbSpfTableEntry | not-accessible | current | This table can be used to display reachability information about known bridges, calculated by the Spf algorithm. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.11.1.1 | ColumnalcatelIND1IsisSpbSpfBvlan | not-accessible | current | The vlan to which this entry belongs. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.11.1.2 | ColumnalcatelIND1IsisSpbSpfSysMac | not-accessible | current | The mac-address of the bridge identified by this entry. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.11.1.3 | ColumnalcatelIND1IsisSpbSpfSysName | read-only | current | Name of the bridge identified by this entry. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.11.1.4 | ColumnalcatelIND1IsisSpbSpfIfIndex | read-only | current | The outgoing interface index for reaching the bridge identified by this entry. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.11.1.5 | ColumnalcatelIND1IsisSpbSpfNextHopSysMac | read-only | current | The mac-address of the next-hop for reaching the bridge identified by this entry |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.11.1.6 | ColumnalcatelIND1IsisSpbSpfNextHopSysName | read-only | current | Name of the next-hop bridge for reaching the bridge identified by this entry |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.11.1.7 | ColumnalcatelIND1IsisSpbSpfMetric | read-only | current | The metric/incremental cost to reach the bridge identified by this entry. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.11.1.8 | ColumnalcatelIND1IsisSpbSpfHopCount | read-only | current | The number of hops needed to reach the bridge identified by this entry. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12 | TablealcatelIND1IsisSpbMulticastSourceSpfTable | not-accessible | current | The multicast source spf table. cf. show ip isis multicast-sources-spf |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12.1 | RowalcatelIND1IsisSpbMulticastSourceSpfTableEntry | not-accessible | current | This table can be used to display the spf table of multicast sources in a SPB network. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12.1.1 | ColumnalcatelIND1IsisSpbMulticastSourceSpfTableEntryTopIx | not-accessible | current | The ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances wi… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12.1.2 | ColumnalcatelIND1IsisSpbMulticastSourceSpfTableEntryBMac | not-accessible | current | The mac address of the multicast source. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12.1.3 | ColumnalcatelIND1IsisSpbMulticastSourceSpfTableEntryBvlan | not-accessible | current | The bvlan of the multicast source spf entry. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12.1.4 | ColumnalcatelIND1IsisSpbMulticastSourceSpfTableEntryDestMac | not-accessible | current | The destination mac address of the multicast source spf entry |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12.1.5 | ColumnalcatelIND1IsisSpbMulticastSourceSpfTableEntryIfIndex | read-only | current | The outbound ifindex of the multicast source spf entry. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12.1.6 | ColumnalcatelIND1IsisSpbMulticastSourceSpfTableEntryNHopName | read-only | current | The next hop system name of the multicast source spf entry. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12.1.7 | ColumnalcatelIND1IsisSpbMulticastSourceSpfTableEntryNHopMac | read-only | current | The next hop system mac of the multicast source spf entry. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12.1.8 | ColumnalcatelIND1IsisSpbMulticastSourceSpfTableEntryMetric | read-only | current | The path metric of the multicast source spf entry. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12.1.9 | ColumnalcatelIND1IsisSpbMulticastSourceSpfTableEntryHopCount | read-only | current | The hop count of the multicast source spf entry. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.13 | TablealcatelIND1IsisSpbIngressMacFilterTable | not-accessible | current | The ingress mac filter table. cf. show ip isis ingress-mac-filter |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.13.1 | RowalcatelIND1IsisSpbIngressMacFilterEntry | not-accessible | current | The ingress mac filter table. cf. show spb isis ingress-mac-filter |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.13.1.1 | ColumnalcatelIND1IsisSpbIngressMacBvlan | not-accessible | current | The vlan to which this entry belongs. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.13.1.2 | ColumnalcatelIND1IsisSpbIngressMacSysMac | not-accessible | current | The mac-address that identifies this entry. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.13.1.3 | ColumnalcatelIND1IsisSpbIngressMacSysName | read-only | current | The name of the bridge identified by this entry. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.13.1.4 | ColumnalcatelIND1IsisSpbIngressMacIfIndex | read-only | current | The ifindex of this entry. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.14 | TablealcatelIND1IsisSpbServiceTable | not-accessible | current | The services table. cf. show spb isis services |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.14.1 | RowalcatelIND1IsisSpbServiceTableEntry | not-accessible | current | This table can be used to display the local configured and dynamically learned services. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.14.1.1 | ColumnalcatelIND1IsisSpbServiceTableEntryTopIx | not-accessible | current | The ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances wi… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.14.1.2 | ColumnalcatelIND1IsisSpbServiceTableEntryBvlan | not-accessible | current | Bvlan of the service. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.14.1.3 | ColumnalcatelIND1IsisSpbServiceTableEntryIsid | not-accessible | current | The service identifier, e.g. isid number |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.14.1.4 | ColumnalcatelIND1IsisSpbServiceTableEntrySysMac | not-accessible | current | System MAC of the SPB node on which the service is configured |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.14.1.5 | ColumnalcatelIND1IsisSpbServiceTableEntrySysName | read-only | current | System name of SPB node on which the service is configured |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.14.1.6 | ColumnalcatelIND1IsisSpbServiceTableEntryIsidFlags | read-only | current | Service flags e.g. source or sink of multicast traffic |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.15 | TablealcatelIND1SpbIPVPNBindTable | not-accessible | current | The table binds vrf, ISID and IP gateway together to enable route exchange between GRM and SPB-ISIS. The exchange is bidirectional. route-map only applies to V… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.15.1 | RowalcatelIND1SpbIPVPNBindTableEntry | not-accessible | current | An Entry in the alcatelIND1SpbIPVPNBindTable |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.15.1.1 | ColumnalcatelIND1SpbIPVPNBindTableEntryTopIx | not-accessible | current | The ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances wi… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.15.1.2 | ColumnalcatelIND1SpbIPVPNBindVrfName | not-accessible | current | The VRF for which routes are being imported from GRM to ISIS-SPB. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.15.1.3 | ColumnalcatelIND1SpbIPVPNBindIsid | not-accessible | current | The ISID to set for routes imported from GRM to ISIS-SPB. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.15.1.4 | ColumnalcatelIND1SpbIPVPNBindGateway | not-accessible | current | The IP gateway to set for routes imported from GRM to ISIS-SPB. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.15.1.5 | ColumnalcatelIND1SpbIPVPNBindImportRouteMap | read-create | current | The route-map name (or empty-string for all-routes) for routes imported from GRM to ISIS-SPB. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.15.1.6 | ColumnalcatelIND1SpbIPVPNBindRowStatus | read-create | current | The object indicates the status of an entry, and is used to create/delete entries. This object is persistent. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.16 | TablealcatelIND1SpbIPVPNRouteTable | not-accessible | current | The IP-VPN table of routes. cf. show spb ipvpn route-table |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.16.1 | RowalcatelIND1SpbIPVPNRouteTableEntry | not-accessible | current | An Entry in the alcatelIND1SpbIPVPNRouteTable |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.16.1.1 | ColumnalcatelIND1SpbIPVPNRouteTableEntryTopIx | not-accessible | current | The ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances wi… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.16.1.2 | ColumnalcatelIND1SpbIPVPNRouteIsid | not-accessible | current | The ISID of the IP-VPN route |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.16.1.3 | ColumnalcatelIND1SpbIPVPNRoutePrefix | not-accessible | current | The destination prefix of the IP-VPN route |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.16.1.4 | ColumnalcatelIND1SpbIPVPNRoutePrefixLen | not-accessible | current | The prefix length of the IP-VPN route |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.16.1.5 | ColumnalcatelIND1SpbIPVPNRouteGateway | not-accessible | current | The next-hop/gateway of the IP-VPN route |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.16.1.6 | ColumnalcatelIND1SpbIPVPNRouteNodeName | read-only | current | The BEB name of the node that advertised the IP-VPN route |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.16.1.7 | ColumnalcatelIND1SpbIPVPNRouteMetric | read-only | current | The route-metric of the IP-VPN route |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.17 | TablealcatelIND1SpbIPVPNRedistVrfTable | not-accessible | current | The IP-VPN table of configured route-redistributions where the source entity is a VRF. cf. show spb ipvpn redist |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.17.1 | RowalcatelIND1SpbIPVPNRedistVrfTableEntry | not-accessible | current | An Entry in the alcatelIND1SpbIPVPNRedistVrfTable |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.17.1.1 | ColumnalcatelIND1SpbIPVPNRedistVrfTableEntryTopIx | not-accessible | current | The ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances wi… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.17.1.2 | ColumnalcatelIND1SpbIPVPNRedistVrfSourceVrf | not-accessible | current | The source VRF from which routes are being redistributed. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.17.1.3 | ColumnalcatelIND1SpbIPVPNRedistVrfDestIsid | not-accessible | current | The destination ISID to which routes are being redistributed. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.17.1.4 | ColumnalcatelIND1SpbIPVPNRedistVrfRouteMap | read-create | current | The route-map name (or empty-string for all-routes) for the filter to be applied to this route-redistribution. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.17.1.5 | ColumnalcatelIND1SpbIPVPNRedistVrfRowStatus | read-create | current | The object indicates the status of an entry, and is used to create/delete entries. This object is persistent. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.18 | TablealcatelIND1SpbIPVPNRedistIsidTable | not-accessible | current | The IP-VPN table of configured route-redistributions where the source entity is an ISID. cf. show spb ipvpn redist |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.18.1 | RowalcatelIND1SpbIPVPNRedistIsidTableEntry | not-accessible | current | An Entry in the alcatelIND1SpbIPVPNRedistIsidTable |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.18.1.1 | ColumnalcatelIND1SpbIPVPNRedistIsidTableEntryTopIx | not-accessible | current | The ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances wi… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.18.1.2 | ColumnalcatelIND1SpbIPVPNRedistIsidSourceIsid | not-accessible | current | The source ISID from which routes are being redistributed. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.18.1.3 | ColumnalcatelIND1SpbIPVPNRedistIsidDestIsid | not-accessible | current | The destination ISID to which routes are being redistributed. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.18.1.4 | ColumnalcatelIND1SpbIPVPNRedistIsidRouteMap | read-create | current | The route-map name (or empty-string for all-routes) for the filter to be applied to this route-redistribution. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.18.1.5 | ColumnalcatelIND1SpbIPVPNRedistIsidRowStatus | read-create | current | The object indicates the status of an entry, and is used to create/delete entries. This object is persistent. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2 | NodealcatelIND1IsisSpbConformance | |||
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2.1 | NodealcatelIND1IsisSpbGroups | |||
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2.1.1 | GroupalcatelIND1IsisSpbSysGroupSPBM | current | The collection of objects used to represent alcatelIND1IsisSpbSys | |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2.1.2 | GroupalcatelIND1IsisSpbProtocolConfigGroupSPBM | current | The collection of objects used to represent alcatelIND1IsisSpbProtocol | |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2.1.3 | GroupalcatelIND1IsisSpbAdjStaticEntryConfigGroupSPBM | current | The collection of objects used to represent Isis Spb Adjacent Static information | |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2.1.4 | GroupalcatelIND1IsisSpbSysConfigGroupSPBM | current | The collection of objects to represent Isis Spb System information | |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2.1.5 | GroupalcatelIND1IsisSpbAdjGroupSPBM | current | The collection of objects to represent Isis Spb Adjacent Group SPBM information | |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2.1.6 | GroupalcatelIND1IsisSpbIngressMacGroupSPBM | current | The collection of objects to represent Isis Spb Ingress Mac Group | |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2.1.7 | GroupalcatelIND1IsisSpbLSPGroupSPBM | current | The collection of objects to represent Isis Spb LSP Group SPBM information | |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2.1.8 | GroupalcatelIND1IsisSpbMulticastSourceGroupSPBM | current | The collection of objects to represent Isis Spb Multicast Source Group SPBM information | |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2.1.9 | GroupalcatelIND1IsisSpbMulticastTableEntryGroupSPBM | current | The collection of objects to represent Isis Spb Multicast Group SPBM information | |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2.1.10 | GroupalcatelIND1IsisSpbServiceTableEntryGroupSPBM | current | The collection of objects to represent Isis Spb Service Group SPBM information | |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2.1.11 | GroupalcatelIND1IsisSpbSpfGroupSPBM | current | The collection of objects to represent Isis Spb Spf Group SPBM information | |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2.1.12 | GroupalcatelIND1IsisSpbUnicastGroupSPBM | current | The collection of objects to represent Isis Spb Unicast Group SPBM information | |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2.1.13 | GroupalcatelIND1IsisSpbNodeGroupSPBM | current | The collection of objects to represent Isis Spb Node Group SPBM information | |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2.1.14 | GroupalcatelIND1IsisSpbVPNBindTableGroupSPBM | current | The collection of objects to represent Isis Spb Vpn Bind Table Group SPBM information | |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2.1.15 | GroupalcatelIND1IsisSpbVPNRouteTableGroupSPBM | current | The collection of objects to represent Isis Spb Vpn Route Table Group SPBM information | |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2.1.16 | GroupalcatelIND1IsisSpbVPNRedistVrfTableGroupSPBM | current | The collection of objects to represent Isis Spb Vpn Redist Vrf Table Group SPBM information | |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2.1.17 | GroupalcatelIND1IsisSpbVPNRedistIsidTableGroupSPBM | current | The collection of objects to represent Isis Spb Vpn Redist Isid Table Group SPBM information | |
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2.2 | NodealcatelIND1IsisSpbCompliances | |||
| 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2.2.1 | CompliancealcatelIND1IsisSpbComplianceSPBM | current | Compliance to Alcatel IND1 ISIS SPBM mode |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AlcatelIND1IsisSpbAdjState | INTEGER { up(1), down(2), testing(3) } | current | The current state of this SPB adjacency or port. The values are up, down, and testing. |
| AlcatelIND1IsisSpbAreaAddress | OCTET STRING (SIZE(3)) | current | This identifier is the 3 Byte IS-IS Area Address. Domain Specific part(DSP). Default is 00-00-00. |
| AlcatelIND1IsisSpbBridgePriority | OCTET STRING (SIZE(2)) | current | The Bridge priority is the top 2 bytes of the Bridge Identifier. Lower values represent a better priority. |
| AlcatelIND1IsisSpbDigestConvention | INTEGER { off(1), loopFreeBoth(2), loopFreeMcastOnly(3) } | current | The mode of the current Agreement Digest. This determines the level of loop prevention. |
| AlcatelIND1IsisSpbEctAlgorithm | OCTET STRING (SIZE(4)) | current | The 4 byte Equal Cost Multiple Tree Algorithm identifier. This identifies the tree computation algorithm and tie breakers. |
| AlcatelIND1IsisSpbIfOperState | INTEGER { unknown (1), inService (2), outOfService (3), transition (4) } | current | The AlcatelIND1IsisSpbIfOperState data type is an enumerated integer that describes the operational state of an interface. |
| AlcatelIND1IsisSpbLinkMetric | Integer32(1..16777215) | current | The 24 bit cost of an SPB link. A lower metric value means better. Value 16777215 equals Infinity. |
| AlcatelIND1IsisSpbmIsidFlags | INTEGER { none(0), tx(1), rx(2), both(3) } | current | Flags to indicate multicast source/sink or both. cf. IEEE8021PbbIngressEgress |
| AlcatelIND1IsisSpbmMulticastMode | INTEGER { sgmode(0), gmode(1) } | current | Multicast mode for tandem-multicast. |
| AlcatelIND1IsisSpbMode | INTEGER { auto(1), manual(2) } | current | Auto allocation control for this instance of SPB. For SPBV it controls SPVIDs and for SPBM it controls SPSourceID. |
| AlcatelIND1IsisSpbmSPsourceId | OCTET STRING (SIZE(3)) | current | The Shortest Path Source Identifier for this bridge. It is the high order 3 bytes for multicast DA from this bridge. Note that only the 20 bits not including the top 4 bits are the SPSourceID. |
| AlcatelIND1IsisSpbMTID | Unsigned32 | current | The IS-IS Multi Topology Identifier. |
| AlcatelIND1IsisSpbSystemName | OCTET STRING (SIZE(0..32)) | current | This is the System Name assigned to this Bridge. |
| AlcatelSpbServiceIdentifier | Unsigned32 (255..16777215) | current | The service instance identifier is used at the Customer Backbone port in SPBM to distinguish a service instance. The special value of 0xFFFFFF is used for wildcard. This range also includes the default I-SID. cf. IEEE80… |