ALCATEL-ENT1-PIM-MIB
66 objects
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): This proprietary MIB contains management information for the configuration of PIM-SM and PIM-DM global configuration parameters. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent Copyright (C) 2015 ALE USA, Inc. ALL RIGHTS RESERVED WORLDWIDE
Imported Objects
| ALCATEL-ENT1-BASE | routingIND1Pim |
| INET-ADDRESS-MIB | InetAddress InetAddressPrefixLength InetAddressType |
| PIM-STD-MIB | pimInterfaceEntry |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1 | IdentityalcatelIND1PIMMIB | This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): This proprietary MIB co… | ||
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.0 | NodealaPimNotifications | |||
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.0.1 | NotificationalaPimNonBidirHello | current | An alaPimNonBidirHello notification signifies that a bidir-capable router has received a PIM hello from a non-bidir-capable router. This notification is genera… | |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1 | NodealcatelIND1PIMMIBObjects | |||
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1 | NodealaPimsmGlobalConfig | |||
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.1 | ScalaralaPimsmAdminStatus | read-write | current | Administratively enables/disables the PIM-SM protocol on this router. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.2 | ScalaralaPimsmMaxRPs | read-write | current | The maximum number of C-RPs allowed in the PIM-SM domain. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.3 | ScalaralaPimsmProbeTime | read-write | current | When NULL Registers are used, this is the time between sending a NULL Register and the Register- Suppression-Timer expiring unless it is restarted by receiving… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.4 | ScalaralaPimsmOldRegisterMessageSupport | read-write | current | Specifies the application of the checksum function on received Register messages in the PIM-SM domain. When set to full(2), the checksum for a register message… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.5 | ScalaralaPimsmAdminSPTConfig | read-write | current | Administratively enables/disables SPT Switchover upon receiving the first data packet. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.6 | ScalaralaPimsmRPThreshold | read-write | current | Sets the RP threshold value (in bps) to be used in determining when to switch to native forwarding at the RP. The value of 0 disables the RP Threshold function… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.7 | ScalaralaPimsmV6AdminStatus | read-write | current | Administratively enables/disables the PIM-SM IPv6 protocol on this router. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.8 | ScalaralaPimsmV6SPTConfig | read-write | current | Administratively enables/disables PIM IPv6 SPT Switchover upon receiving the first data packet. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.9 | ScalaralaPimsmV6RPSwitchover | read-write | current | Administratively enables/disables whether PIM IPv6 will attempt to switch to native forwarding at the RP upon receiving the first register-encapsulated packet. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.10 | ScalaralaPimsmBidirStatus | read-write | current | Administratively enables/disables the PIM BIDIR protocol on this router. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.11 | ScalaralaPimsmBidirPeriodicInterval | read-write | current | This is the interval at which the DF for each RPA will periodically announce its status in a Winner message. A value of 0 indicates that periodic messages will… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.12 | ScalaralaPimsmBidirDFAbort | read-write | current | Administratively enables/disables whether the DF election will be automatically aborted if a PIM hello is received from a PIM neighbor without the bidirectiona… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.13 | ScalaralaPimsmNonBidirHelloPeriod | read-write | current | The minimum time that must elapse between alaPimNonBidirHello notifications originated by this router. The default value of 65535 represents an 'infinite' time… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.14 | ScalaralaPimsmNonBidirHelloMsgsRcvd | read-only | current | The number of PIM Hello messages that have been received by a BIDIR-capable device that do not have the Bidirectional Capable option. This counter is increment… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.15 | ScalaralaPimsmNonBidirHelloAddressType | read-only | current | The address type stored in alaPimsmNonBidirHelloOrigin. If no Non Bidir Hello messages have been received, this object is set to unknown(0). |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.16 | ScalaralaPimsmNonBidirHelloOrigin | read-only | current | The source address of the last Non Bidir Hello message received by this device. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.17 | ScalaralaPimsmV6BidirStatus | read-write | current | Administratively enables/disables the PIM IPv6 BIDIR protocol on this router. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.18 | ScalaralaPimsmRPHashStatus | read-write | current | Administratively enables/disables applying the PIM hash function defined in RFC 4601 when selecting an RP from two or more equal group-range-to-RP mappings. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.19 | ScalaralaPimsmBidirSsmCompat | read-write | current | Administratively enables/disables whether PIM BIDIR will support receiving IGMPv3 source-specific joins and treat them as a (*,G) join. By default, IGMPv3 sour… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.20 | ScalaralaPimsmV6BidirSsmCompat | read-write | current | Administratively enables/disables whether IPv6 PIM BIDIR will support receiving MLDv2 source-specific joins and treat them as a (*,G) join. By default, MLDv2 s… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.21 | ScalaralaPimsmBidirFastJoin | read-write | current | Administratively enables/disables whether PIM BIDIR will automatically create the routes in hardware as soon as the BIDIR (*,G) routes are learned. By default,… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.22 | ScalaralaPimsmV6BidirFastJoin | read-write | current | Administratively enables/disables whether IPv6 PIM BIDIR will automatically create the routes in hardware as soon as the BIDIR (*,G) routes are learned. By def… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.23 | ScalaralaPimsmAsmFastJoin | read-write | current | Administratively enables/disables whether PIM ASM will automatically create the (*,G) routes in hardware as soon as the ASM (*,G) routes are learned. By defaul… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.24 | ScalaralaPimsmV6AsmFastJoin | read-write | current | Administratively enables/disables whether IPv6 PIM ASM will automatically create the (*,G) routes in hardware as soon as the ASM (*,G) routes are learned. By d… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.25 | ScalaralaPimsmSsmFastJoin | read-write | current | Administratively enables/disables whether PIM will automatically create the (S,G) routes in hardware as soon as the (S,G) routes are learned. This includes PIM… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.26 | ScalaralaPimsmV6SsmFastJoin | read-write | current | Administratively enables/disables whether IPv6 PIM will automatically create the (S,G) routes in hardware as soon as the (S,G) routes are learned. This include… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2 | NodealaPimdmGlobalConfig | |||
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2.1 | ScalaralaPimdmAdminStatus | read-write | current | Administratively enables/disables the PIM-DM protocol on this router. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2.2 | ScalaralaPimdmStateRefreshTimeToLive | read-write | current | The TTL to be used by this router's originated State Refresh messages if the data packet's TTL is not recorded. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2.3 | ScalaralaPimdmStateRefreshLimitInterval | read-write | current | This router will not forward successive State Refresh messages received at less than this interval. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2.4 | ScalaralaPimdmV6AdminStatus | read-write | current | Administratively enables/disables the PIM-DM IPv6 protocol on this router. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2.5 | TablealaPimdmDenseGroupTable | not-accessible | current | This table is used to manage configuration of dense groups. If the group prefixes configured for two or more rows in this table overlap, the row with the great… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2.5.1 | RowalaPimdmDenseGroupEntry | not-accessible | current | An entry (conceptual row) in the alaPimdmDenseGroupTable. This entry is preserved on agent restart. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2.5.1.1 | ColumnalaPimdmDenseGroupAddressType | not-accessible | current | The address type of this entry. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2.5.1.2 | ColumnalaPimdmDenseGroupGrpAddress | not-accessible | current | The multicast group address that, when combined with alaPimdmDenseGroupGrpPrefixLength, gives the group prefix for this entry. The InetAddressType is given by … |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2.5.1.3 | ColumnalaPimdmDenseGroupGrpPrefixLength | not-accessible | current | The multicast group prefix length that, when combined with alaPimdmDenseGroupGrpAddress, gives the group prefix for this entry. The InetAddressType is given by… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2.5.1.4 | ColumnalaPimdmDenseGroupOverrideDynamic | read-create | current | Whether this dense group configuration will override other group mappings in this group prefix. If this object is TRUE, then it will override: - RP information… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2.5.1.5 | ColumnalaPimdmDenseGroupPrecedence | read-create | current | The value for pimGroupMappingPrecedence to be used for this static RP configuration. This allows fine control over which configuration is overridden by this st… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2.5.1.6 | ColumnalaPimdmDenseGroupRowStatus | read-create | current | The status of this row, by which rows in this table can be created and destroyed. All writeable objects in this entry can be modified when the status of this e… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.3 | NodealaPimGlobalConfig | |||
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.3.1 | ScalaralaPimBfdStatus | read-write | current | Administratively enables/disables PIM with the BFD protocol on this router. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.3.2 | ScalaralaPimBfdAllInterfaceStatus | read-write | current | Administratively enables/disables BFD for all PIM interfaces on this router. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.3.3 | ScalaralaPimMoFRRStatus | read-write | current | Administratively enables/disables MoFRR (Multicast only Fast Re-Route) on this router. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.3.4 | ScalaralaPimMoFRRAllRouteStatus | read-write | current | By default, MoFRR is only applied to multicast routes that have local clients. Enabling alaPimMoFRRAllRouteStatus will enable MoFRR on all routes whether there… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.3.5 | TablealaPimInterfaceAugTable | not-accessible | current | Expansion for pimInterfaceTable |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.3.5.1 | RowalaPimInterfaceAugEntry | not-accessible | current | An entry of alaPimInterfaceAugTable |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.3.5.1.1 | ColumnalaPimInterfaceBfdStatus | read-write | current | Enables/Disables BFD for particular interfaces of PIM. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.3.6 | ScalaralaPimMbrAllSourcesStatus | read-write | current | Administratively enables/disables PIM to notify DVMRP about the routes to all multicast sources learned instead of just the directly connected subnets so that … |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.3.7 | ScalaralaPimMbrOperStatus | read-only | current | Whether MBR is currently enabled/disabled for PIM. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.3.8 | ScalaralaPimV6BfdStatus | read-write | current | Administratively enables/disables PIM IPv6 with the BFD protocol on this router. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.3.9 | ScalaralaPimV6BfdAllInterfaceStatus | read-write | current | Administratively enables/disables BFD for all PIM IPv6 interfaces on this router. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.2 | NodealcatelIND1PIMMIBConformance | |||
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.2.1 | NodealcatelIND1PIMMIBCompliances | |||
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.2.1.1 | CompliancealaPimsmCompliance | current | The compliance statement for routers running PIM Sparse Mode and implementing the ALCATEL-IND1-PIM MIB. | |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.2.1.2 | CompliancealaPimdmCompliance | current | The compliance statement for routers running PIM Dense Mode and implementing the ALCATEL-IND1-PIM MIB. | |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.2.2 | NodealcatelIND1PIMMIBGroups | |||
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.2.2.1 | GroupalaPimsmConfigMIBGroup | current | A collection of objects to support management of global configuration parameters of PIM Sparse Mode routers. | |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.2.2.2 | GroupalaPimdmConfigMIBGroup | current | A collection of objects to support management of global configuration parameters of PIM Dense Mode routers. | |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.2.2.3 | GroupalaPimConfigMIBGroup | current | A collection of objects to support management of global configuration parameters of PIM routers. | |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.2.2.4 | GroupalaPimOptionalGroup | current | PIM objects to stop the tools from complaining | |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.1.2.2.5 | GroupalaPimNotificationGroup | current | PIM Notification objects |