ALCATEL-IND1-INLINE-POWER-MIB
37 objects
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): Propietary InLinePower Extensions MIB definitions The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
Imported Objects
| ALCATEL-IND1-BASE | pethTraps softentIND1InLinePower |
| POWER-ETHERNET-MIB | pethMainPseEntry pethPsePortEntry |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6486.800.1.2.1.27.1 | IdentityalcatelIND1INLINEPOWERMIB | This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): Propietary InLinePower … | ||
| 1.3.6.1.4.1.6486.800.1.2.1.27.1.1 | NodealaPethObjects | |||
| 1.3.6.1.4.1.6486.800.1.2.1.27.1.1.1 | TablealaPethPsePortTable | not-accessible | current | A table of objects that augments the standard pethPsePortTable entry by adding the alaPethPsePortPowerMaximum object. |
| 1.3.6.1.4.1.6486.800.1.2.1.27.1.1.1.1 | RowalaPethPsePortEntry | not-accessible | current | A set of objects that display and control the power characteristics of a power Ethernet PSE port. |
| 1.3.6.1.4.1.6486.800.1.2.1.27.1.1.1.1.1 | ColumnalaPethPsePortPowerMaximum | read-write | current | This object controls maximum amount of power per port. |
| 1.3.6.1.4.1.6486.800.1.2.1.27.1.1.1.1.2 | ColumnalaPethPsePortPowerActual | read-only | current | This object contains the actual amount of power used by a port |
| 1.3.6.1.4.1.6486.800.1.2.1.27.1.1.1.1.3 | ColumnalaPethPsePortPowerStatus | read-only | current | This object contains the power status of a port |
| 1.3.6.1.4.1.6486.800.1.2.1.27.1.1.1.1.4 | ColumnalaPethPsePortPowerClass | read-only | current | This object controls class of poe device attached on a port. class0 - The device can draw PD power from 0.44W to 12.95W and current less than 5.0 mA. class1 - … |
| 1.3.6.1.4.1.6486.800.1.2.1.27.1.1.2 | TablealaPethMainPseTable | not-accessible | current | This table augments the standard table PethMainPseTable by allowing the admin status for a group to be set to on/off as well as showing the values for the max … |
| 1.3.6.1.4.1.6486.800.1.2.1.27.1.1.2.1 | RowalaPethMainPseEntry | not-accessible | current | A set of objects that display and control the Main power of a PSE. |
| 1.3.6.1.4.1.6486.800.1.2.1.27.1.1.2.1.1 | ColumnalaPethMainPseAdminStatus | read-write | current | The object is used to set the status of the main PSE to ON or OFF. |
| 1.3.6.1.4.1.6486.800.1.2.1.27.1.1.2.1.2 | ColumnalaPethMainPseMaxPower | read-write | current | The maximum amount of power allowed for main PSE. |
| 1.3.6.1.4.1.6486.800.1.2.1.27.1.1.2.1.3 | ColumnalaPethMainPsePriorityDisconnect | read-write | current | The object is used to set the priority disconnect of the main PSE to Enabled or Disable. |
| 1.3.6.1.4.1.6486.800.1.2.1.27.1.1.2.1.4 | ColumnalaPethMainPseCapacitorDetect | read-write | current | The object is used to enable or disable the PowerDsine Capacitor detection method. |
| 1.3.6.1.4.1.6486.800.1.2.1.27.1.1.2.1.5 | ColumnalaPethMainPsePriority | read-write | current | The object is set the power down priority for the slot |
| 1.3.6.1.4.1.6486.800.1.2.1.27.1.1.2.1.6 | ColumnalaPethMainPseComboPort | read-write | current | The object is used to set the combo port option of the main PSE to Enable or Disable. |
| 1.3.6.1.4.1.6486.800.1.2.1.27.1.1.3 | NodealaPethNotificationObjects | |||
| 1.3.6.1.4.1.6486.800.1.2.1.27.1.1.3.1 | ScalarpethSourceSlot | accessible-for-notify | current | Slot number of generating entity. |
| 1.3.6.1.4.1.6486.800.1.2.1.27.1.1.3.2 | ScalarpethSourcePort | accessible-for-notify | current | Port number of generating entity. |
| 1.3.6.1.4.1.6486.800.1.2.1.27.1.1.3.3 | ScalarpethSourcePortDetectionStatus | accessible-for-notify | current | Describes the current state of the Port. |
| 1.3.6.1.4.1.6486.800.1.2.1.27.1.1.3.4 | ScalarpethSourcePortStatusChangeReason | accessible-for-notify | current | Describes the reason of change in state. |
| 1.3.6.1.4.1.6486.800.1.2.1.27.1.2 | NodealaPethConformance | |||
| 1.3.6.1.4.1.6486.800.1.2.1.27.1.2.1 | NodealaPethCompliances | |||
| 1.3.6.1.4.1.6486.800.1.2.1.27.1.2.1.1 | CompliancealaPethCompliance | current | Describes the requirements for conformance to the Alcatel Power Ethernet MIB. | |
| 1.3.6.1.4.1.6486.800.1.2.1.27.1.2.1.2 | CompliancealaPethPseCompliance | current | Describes the requirements for conformance to the PSE | |
| 1.3.6.1.4.1.6486.800.1.2.1.27.1.2.2 | NodealaPethGroups | |||
| 1.3.6.1.4.1.6486.800.1.2.1.27.1.2.2.1 | GroupalaPethPsePortGroup | current | The pethPsePortGroup is mandatory for systems which implement PSE ports. | |
| 1.3.6.1.4.1.6486.800.1.2.1.27.1.2.2.2 | GroupalaPethMainPseGroup | current | Main PSE Objects. | |
| 1.3.6.1.4.1.6486.800.1.2.1.27.1.2.2.3 | GrouppethTrapsGroup | current | Notifications for PETH MIB | |
| 1.3.6.1.4.1.6486.800.1.2.1.27.1.2.2.4 | GroupalaPethTrapObjGroup | current | Collection of Objects used by PETH Notifications. | |
| 1.3.6.1.4.1.6486.800.1.2.1.27.1.3 | NodealaPethMain | |||
| 1.3.6.1.4.1.6486.800.1.2.1.27.1.3.1 | TablealaPethMainTable | not-accessible | current | A table of objects that augments the standard pethPsePortTable entry by adding the alaPethPsePortPowerMaximum object. |
| 1.3.6.1.4.1.6486.800.1.2.1.27.1.3.1.1 | RowalaPethMainEntry | not-accessible | current | A set of objects that display and control the power characteristics of a power Ethernet PSE port. |
| 1.3.6.1.4.1.6486.800.1.2.1.27.1.3.1.1.1 | ColumnalaPethMainIndex | not-accessible | current | This variable uniquely identifies the group to which power Ethernet PSE is connected.Group means (box in the stack, module in a rack) and the value 1 MUST be u… |
| 1.3.6.1.4.1.6486.800.1.2.1.27.1.3.1.1.2 | ColumnalaPethMainPowerRedundancy | read-write | current | This object controls power supply redundancy. |
| 1.3.6.1.4.1.6486.800.1.3.2.17.0.1 | NotificationpethPwrSupplyConflict | current | Power supply type conflict trap. | |
| 1.3.6.1.4.1.6486.800.1.3.2.17.0.2 | NotificationpethPwrSupplyNotSupported | current | Power supply not supported trap. |