ALTEON-TS-PHYSICAL-MIB
196 objects
No module-level DESCRIPTION found.
Imported Objects
| ALTEON-ROOT-MIB | switch |
| ALTEON-TIGON-SWITCH-MIB | agent information operCmds stats |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter Gauge IpAddress TimeTicks |
| RFC1213-MIB | DisplayString PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1872.2.1.2.3 | NodeagPortConfig | |||
| 1.3.6.1.4.1.1872.2.1.2.3.1 | ScalaragPortTableMaxEnt | read-only | mandatory | The maximum number of rows in the port configuration host table. |
| 1.3.6.1.4.1.1872.2.1.2.3.2 | TableagPortCurCfgTable | not-accessible | mandatory | The table of port configuration in the current_configuration block. |
| 1.3.6.1.4.1.1872.2.1.2.3.2.1 | RowagPortCurCfgTableEntry | not-accessible | mandatory | A row in the port table in the current_configuration block. |
| 1.3.6.1.4.1.1872.2.1.2.3.2.1.1 | ColumnagPortCurCfgIndx | read-only | mandatory | The index of the row in port configurations table. |
| 1.3.6.1.4.1.1872.2.1.2.3.2.1.2 | ColumnagPortCurCfgPrefLink | read-only | mandatory | This is the preferred link. |
| 1.3.6.1.4.1.1872.2.1.2.3.2.1.3 | ColumnagPortCurCfgBackLink | read-only | mandatory | This is the backup link. |
| 1.3.6.1.4.1.1872.2.1.2.3.2.1.4 | ColumnagPortCurCfgState | read-only | mandatory | This is the state of the port. |
| 1.3.6.1.4.1.1872.2.1.2.3.2.1.5 | ColumnagPortCurCfgVlanTag | read-only | mandatory | This is VLAN tag state of the port |
| 1.3.6.1.4.1.1872.2.1.2.3.2.1.6 | ColumnagPortCurCfgStp | read-only | mandatory | This object is used to turn Spanning Tree on or off for the port. |
| 1.3.6.1.4.1.1872.2.1.2.3.2.1.7 | ColumnagPortCurCfgRmon | read-only | mandatory | This object is used to turn RMON on or off on the port. |
| 1.3.6.1.4.1.1872.2.1.2.3.2.1.8 | ColumnagPortCurCfgPVID | read-only | mandatory | The default VLAN ID for the port. |
| 1.3.6.1.4.1.1872.2.1.2.3.2.1.9 | ColumnagPortCurCfgFastEthAutoNeg | read-only | mandatory | This object is used to turn the autonegotiation on or off for fast Ethernet connection. |
| 1.3.6.1.4.1.1872.2.1.2.3.2.1.10 | ColumnagPortCurCfgFastEthSpeed | read-only | mandatory | Selects the port speed for fast Ethernet connection. |
| 1.3.6.1.4.1.1872.2.1.2.3.2.1.11 | ColumnagPortCurCfgFastEthMode | read-only | mandatory | This object is used to select port mode for fast Ethernet connection. |
| 1.3.6.1.4.1.1872.2.1.2.3.2.1.12 | ColumnagPortCurCfgFastEthFctl | read-only | mandatory | Selects the port flow control for fast Ethernet connection. |
| 1.3.6.1.4.1.1872.2.1.2.3.2.1.13 | ColumnagPortCurCfgGigEthAutoNeg | read-only | mandatory | This object is used to turn the autonegotiation on or off for gigabit Ethernet connection. |
| 1.3.6.1.4.1.1872.2.1.2.3.2.1.14 | ColumnagPortCurCfgGigEthFctl | read-only | mandatory | This object is used to select port flow control for gigabit Ethernet connection. |
| 1.3.6.1.4.1.1872.2.1.2.3.2.1.15 | ColumnagPortCurCfgPortName | read-only | mandatory | The switch port name. |
| 1.3.6.1.4.1.1872.2.1.2.3.2.1.16 | ColumnagPortCurCfgBwmContract | read-only | mandatory | The switch port Bandwidth Management contract number. |
| 1.3.6.1.4.1.1872.2.1.2.3.2.1.17 | ColumnagPortCurCfgDiscardNonIPs | read-only | mandatory | Enable or disable to discard all non-IP traffic on the switch port. |
| 1.3.6.1.4.1.1872.2.1.2.3.2.1.18 | ColumnagPortCurCfgLinkTrap | read-only | mandatory | Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which d… |
| 1.3.6.1.4.1.1872.2.1.2.3.3 | TableagPortNewCfgTable | not-accessible | mandatory | The table of port configuration in the new_configuration block. |
| 1.3.6.1.4.1.1872.2.1.2.3.3.1 | RowagPortNewCfgTableEntry | not-accessible | mandatory | A row in the port configuration table in the new_configuration block. |
| 1.3.6.1.4.1.1872.2.1.2.3.3.1.1 | ColumnagPortNewCfgIndx | read-only | mandatory | The index of the row in port configurations table. |
| 1.3.6.1.4.1.1872.2.1.2.3.3.1.2 | ColumnagPortNewCfgPrefLink | read-write | mandatory | This is the preferred link. |
| 1.3.6.1.4.1.1872.2.1.2.3.3.1.3 | ColumnagPortNewCfgBackLink | read-write | mandatory | This is the backup link. |
| 1.3.6.1.4.1.1872.2.1.2.3.3.1.4 | ColumnagPortNewCfgState | read-write | mandatory | This is the state of the port. |
| 1.3.6.1.4.1.1872.2.1.2.3.3.1.5 | ColumnagPortNewCfgVlanTag | read-write | mandatory | This is VLAN tag state of the port |
| 1.3.6.1.4.1.1872.2.1.2.3.3.1.6 | ColumnagPortNewCfgStp | read-write | mandatory | This object is used to turn Spanning Tree on or off for the port. |
| 1.3.6.1.4.1.1872.2.1.2.3.3.1.7 | ColumnagPortNewCfgRmon | read-write | mandatory | This object is used to turn RMON on or off on the port. |
| 1.3.6.1.4.1.1872.2.1.2.3.3.1.8 | ColumnagPortNewCfgPVID | read-write | mandatory | The default VLAN ID for the port. |
| 1.3.6.1.4.1.1872.2.1.2.3.3.1.9 | ColumnagPortNewCfgFastEthAutoNeg | read-write | mandatory | This object is used to turn the autonegotiation on or off for fast Ethernet connection. |
| 1.3.6.1.4.1.1872.2.1.2.3.3.1.10 | ColumnagPortNewCfgFastEthSpeed | read-write | mandatory | Selects the port speed for fast Ethernet connection. |
| 1.3.6.1.4.1.1872.2.1.2.3.3.1.11 | ColumnagPortNewCfgFastEthMode | read-write | mandatory | This object is used to select port mode for fast Ethernet connection. |
| 1.3.6.1.4.1.1872.2.1.2.3.3.1.12 | ColumnagPortNewCfgFastEthFctl | read-write | mandatory | Selects the port flow control for fast Ethernet connection. |
| 1.3.6.1.4.1.1872.2.1.2.3.3.1.13 | ColumnagPortNewCfgGigEthAutoNeg | read-write | mandatory | This object is used to turn the autonegotiation on or off for gigabit Ethernet connection. |
| 1.3.6.1.4.1.1872.2.1.2.3.3.1.14 | ColumnagPortNewCfgGigEthFctl | read-write | mandatory | This object is used to select port flow control for gigabit Ethernet connection. |
| 1.3.6.1.4.1.1872.2.1.2.3.3.1.15 | ColumnagPortNewCfgPortName | read-write | mandatory | The switch port name. |
| 1.3.6.1.4.1.1872.2.1.2.3.3.1.16 | ColumnagPortNewCfgBwmContract | read-write | mandatory | The switch port Bandwidth Management contract number. |
| 1.3.6.1.4.1.1872.2.1.2.3.3.1.17 | ColumnagPortNewCfgDiscardNonIPs | read-write | mandatory | Enable or disable to discard all non-IP traffic on the switch port. |
| 1.3.6.1.4.1.1872.2.1.2.3.3.1.18 | ColumnagPortNewCfgLinkTrap | read-write | mandatory | Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which d… |
| 1.3.6.1.4.1.1872.2.1.4 | Nodevlans | |||
| 1.3.6.1.4.1.1872.2.1.4.1 | ScalarvlanMaxEnt | read-only | mandatory | The maximum number of rows in the VLAN configuration table. |
| 1.3.6.1.4.1.1872.2.1.4.2 | TablevlanCurCfgTable | not-accessible | mandatory | The table of VLAN configuration. |
| 1.3.6.1.4.1.1872.2.1.4.2.1 | RowvlanCurCfgTableEntry | not-accessible | mandatory | A row in the VLAN configuration table. |
| 1.3.6.1.4.1.1872.2.1.4.2.1.1 | ColumnvlanCurCfgVlanId | read-only | mandatory | The VLAN identifier. |
| 1.3.6.1.4.1.1872.2.1.4.2.1.2 | ColumnvlanCurCfgVlanName | read-only | mandatory | The VLAN name. |
| 1.3.6.1.4.1.1872.2.1.4.2.1.3 | ColumnvlanCurCfgPorts | read-only | mandatory | The port list in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || ||… |
| 1.3.6.1.4.1.1872.2.1.4.2.1.4 | ColumnvlanCurCfgState | read-only | mandatory | Enable or disable a VLAN |
| 1.3.6.1.4.1.1872.2.1.4.2.1.5 | ColumnvlanCurCfgJumbo | read-only | mandatory | Enable or Disable the Jumbo frame support for the VLAN |
| 1.3.6.1.4.1.1872.2.1.4.2.1.6 | ColumnvlanCurCfgBwmContract | read-only | mandatory | Default contract number the VLAN |
| 1.3.6.1.4.1.1872.2.1.4.2.1.7 | ColumnvlanCurCfgStg | read-only | mandatory | The Spanning Tree Group for the VLAN. |
| 1.3.6.1.4.1.1872.2.1.4.3 | TablevlanNewCfgTable | not-accessible | mandatory | The table of VLAN configuration. |
| 1.3.6.1.4.1.1872.2.1.4.3.1 | RowvlanNewCfgTableEntry | not-accessible | mandatory | A row in the VLAN configuration table. |
| 1.3.6.1.4.1.1872.2.1.4.3.1.1 | ColumnvlanNewCfgVlanId | read-only | mandatory | The VLAN identifier. |
| 1.3.6.1.4.1.1872.2.1.4.3.1.2 | ColumnvlanNewCfgVlanName | read-write | mandatory | The VLAN name. |
| 1.3.6.1.4.1.1872.2.1.4.3.1.3 | ColumnvlanNewCfgPorts | read-only | mandatory | The port list in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || ||… |
| 1.3.6.1.4.1.1872.2.1.4.3.1.4 | ColumnvlanNewCfgState | read-write | mandatory | Enable or disable a VLAN |
| 1.3.6.1.4.1.1872.2.1.4.3.1.5 | ColumnvlanNewCfgJumbo | read-write | mandatory | Enable or Disable the Jumbo frame support for the VLAN |
| 1.3.6.1.4.1.1872.2.1.4.3.1.6 | ColumnvlanNewCfgAddPort | read-write | mandatory | The port to be added to the specified VLAN. A '0' value is returned when read. |
| 1.3.6.1.4.1.1872.2.1.4.3.1.7 | ColumnvlanNewCfgRemovePort | read-write | mandatory | The port to be removed from the specified VLAN. A '0' value is returned when read. |
| 1.3.6.1.4.1.1872.2.1.4.3.1.8 | ColumnvlanNewCfgDelete | read-write | mandatory | This is an action object to create or delete a VLAN. other(1) is returned always when read. The following values are writable: delete(2)...to delete a VLAN |
| 1.3.6.1.4.1.1872.2.1.4.3.1.9 | ColumnvlanNewCfgBwmContract | read-write | mandatory | Default contract number for the VLAN. |
| 1.3.6.1.4.1.1872.2.1.4.3.1.10 | ColumnvlanNewCfgStg | read-write | mandatory | The Spanning Tree Group for the VLAN. |
| 1.3.6.1.4.1.1872.2.1.6 | Nodeportmirroring | |||
| 1.3.6.1.4.1.1872.2.1.6.1 | ScalarpmCurCfgMonitoringPort | read-only | obsolete | The port number of the monitoring port. |
| 1.3.6.1.4.1.1872.2.1.6.2 | ScalarpmNewCfgMonitoringPort | read-write | obsolete | The port number of the monitoring port. |
| 1.3.6.1.4.1.1872.2.1.6.3 | ScalarpmCurCfgMirroredPort | read-only | obsolete | The port number of the mirrored port. |
| 1.3.6.1.4.1.1872.2.1.6.4 | ScalarpmNewCfgMirroredPort | read-write | obsolete | The port number of the mirrored port. |
| 1.3.6.1.4.1.1872.2.1.6.5 | ScalarpmCurCfgMonitoredTraffic | read-only | obsolete | The type of traffic to be monitored with respect to the mirrored port. |
| 1.3.6.1.4.1.1872.2.1.6.6 | ScalarpmNewCfgMonitoredTraffic | read-write | obsolete | The type of traffic to be monitored with respect to the mirrored port. |
| 1.3.6.1.4.1.1872.2.1.6.7 | ScalarpmCurCfgState | read-only | obsolete | The state of Port mirroring. |
| 1.3.6.1.4.1.1872.2.1.6.8 | ScalarpmNewCfgState | read-write | obsolete | The state of Port mirroring. |
| 1.3.6.1.4.1.1872.2.1.6.9 | ScalarpmCurCfgTimeout | read-only | obsolete | The mirroring timeout value in seconds. |
| 1.3.6.1.4.1.1872.2.1.6.10 | ScalarpmNewCfgTimeout | read-write | obsolete | The mirroring timeout value in seconds. |
| 1.3.6.1.4.1.1872.2.1.7 | Nodetrunkgroup | |||
| 1.3.6.1.4.1.1872.2.1.7.1 | ScalartrunkGroupTableMaxSize | read-only | mandatory | The maximum number of entries in trunk group table. |
| 1.3.6.1.4.1.1872.2.1.7.2 | TabletrunkGroupCurCfgTable | not-accessible | mandatory | The table of trunk group configuration. |
| 1.3.6.1.4.1.1872.2.1.7.2.1 | RowtrunkGroupCurCfgTableEntry | not-accessible | mandatory | A row in the trunk group configuration table. |
| 1.3.6.1.4.1.1872.2.1.7.2.1.1 | ColumntrunkGroupCurCfgIndex | read-only | mandatory | The identifier of the trunk group. |
| 1.3.6.1.4.1.1872.2.1.7.2.1.2 | ColumntrunkGroupCurCfgPorts | read-only | mandatory | The port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 |… |
| 1.3.6.1.4.1.1872.2.1.7.2.1.3 | ColumntrunkGroupCurCfgState | read-only | mandatory | Enable or disable a trunk group. |
| 1.3.6.1.4.1.1872.2.1.7.2.1.4 | ColumntrunkGroupCurCfgBwmContract | read-only | mandatory | Default BW contract of a trunk group. |
| 1.3.6.1.4.1.1872.2.1.7.3 | TabletrunkGroupNewCfgTable | not-accessible | mandatory | The table of trunk group configuration. |
| 1.3.6.1.4.1.1872.2.1.7.3.1 | RowtrunkGroupNewCfgTableEntry | not-accessible | mandatory | A row in the trunk group configuration table. |
| 1.3.6.1.4.1.1872.2.1.7.3.1.1 | ColumntrunkGroupNewCfgIndex | read-only | mandatory | The identifier of the trunk group. |
| 1.3.6.1.4.1.1872.2.1.7.3.1.2 | ColumntrunkGroupNewCfgPorts | read-only | mandatory | The port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 |… |
| 1.3.6.1.4.1.1872.2.1.7.3.1.3 | ColumntrunkGroupNewCfgAddPort | read-write | mandatory | The port to be added in the trunk group. When read, 0 is returned. |
| 1.3.6.1.4.1.1872.2.1.7.3.1.4 | ColumntrunkGroupNewCfgRemovePort | read-write | mandatory | The port to be deleted from the trunk group. when read, 0 is returned. |
| 1.3.6.1.4.1.1872.2.1.7.3.1.5 | ColumntrunkGroupNewCfgState | read-write | mandatory | Enable or disable a trunk group. |
| 1.3.6.1.4.1.1872.2.1.7.3.1.6 | ColumntrunkGroupNewCfgDelete | read-write | mandatory | Setting the value to delete(2) will delete the entire row. When read, other(1) is returned. |
| 1.3.6.1.4.1.1872.2.1.7.3.1.7 | ColumntrunkGroupNewCfgBwmContract | read-write | mandatory | Default BW contract of a trunk group. |
| 1.3.6.1.4.1.1872.2.1.8.17 | NodeportCpuStats | |||
| 1.3.6.1.4.1.1872.2.1.8.17.1 | TableportCpuStatsUtilTable | not-accessible | mandatory | The table of port CPU utilization. |
| 1.3.6.1.4.1.1872.2.1.8.17.1.1 | RowportCpuStatsUtilTableEntry | not-accessible | mandatory | A row in the port CPU utilization table. |
| 1.3.6.1.4.1.1872.2.1.8.17.1.1.1 | ColumnportCpuStatsUtilIndx | read-only | mandatory | The port index. |
| 1.3.6.1.4.1.1872.2.1.8.17.1.1.2 | ColumnportCpuAStatsUtil1Second | read-only | mandatory | The utilization of port CPU A over 1 second. It shows the percentage. |
| 1.3.6.1.4.1.1872.2.1.8.17.1.1.3 | ColumnportCpuBStatsUtil1Second | read-only | mandatory | The utilization of port CPU B over 1 second. It shows the percentage. |
| 1.3.6.1.4.1.1872.2.1.8.17.1.1.4 | ColumnportCpuAStatsUtil4Seconds | read-only | mandatory | The utilization of port CPU A over 4 seconds. It shows the percentage. |
| 1.3.6.1.4.1.1872.2.1.8.17.1.1.5 | ColumnportCpuBStatsUtil4Seconds | read-only | mandatory | The utilization of port CPU B over 4 seconds. It shows the percentage. |
| 1.3.6.1.4.1.1872.2.1.8.17.1.1.6 | ColumnportCpuAStatsUtil64Seconds | read-only | mandatory | The utilization of port CPU A over 64 seconds. It shows the percentage. |
| 1.3.6.1.4.1.1872.2.1.8.17.1.1.7 | ColumnportCpuBStatsUtil64Seconds | read-only | mandatory | The utilization of port CPU B over 64 seconds. It shows the percentage. |
| 1.3.6.1.4.1.1872.2.1.8.26 | Nodeport-stats | |||
| 1.3.6.1.4.1.1872.2.1.8.26.1 | TableportStatsTable | not-accessible | mandatory | The table of port statistics. |
| 1.3.6.1.4.1.1872.2.1.8.26.1.1 | RowportStatsTableEntry | not-accessible | mandatory | A row in the port stats table. |
| 1.3.6.1.4.1.1872.2.1.8.26.1.1.1 | ColumnportStatsIndx | read-only | mandatory | The port index. |
| 1.3.6.1.4.1.1872.2.1.8.26.1.1.2 | ColumnportStatsPhyIfInOctets | read-only | mandatory | The total number of octets received on the interface, including framing characters. |
| 1.3.6.1.4.1.1872.2.1.8.26.1.1.3 | ColumnportStatsPhyIfInUcastPkts | read-only | mandatory | The number of subnetwork-unicast packets delivered to a higher-layer protocol. |
| 1.3.6.1.4.1.1872.2.1.8.26.1.1.4 | ColumnportStatsPhyIfInNUcastPkts | read-only | mandatory | The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. |
| 1.3.6.1.4.1.1872.2.1.8.26.1.1.5 | ColumnportStatsPhyIfInDiscards | read-only | mandatory | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr… |
| 1.3.6.1.4.1.1872.2.1.8.26.1.1.6 | ColumnportStatsPhyIfInErrors | read-only | mandatory | The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. |
| 1.3.6.1.4.1.1872.2.1.8.26.1.1.7 | ColumnportStatsPhyIfInUnknownProtos | read-only | mandatory | The number of packets received via the interface which were discarded because of an unknown or unsupported protocol. |
| 1.3.6.1.4.1.1872.2.1.8.26.1.1.8 | ColumnportStatsPhyIfOutOctets | read-only | mandatory | The total number of octets transmitted out of the interface, including framing characters. |
| 1.3.6.1.4.1.1872.2.1.8.26.1.1.9 | ColumnportStatsPhyIfOutUcastPkts | read-only | mandatory | The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not se… |
| 1.3.6.1.4.1.1872.2.1.8.26.1.1.10 | ColumnportStatsPhyIfOutNUcastPkts | read-only | mandatory | The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) addre… |
| 1.3.6.1.4.1.1872.2.1.8.26.1.1.11 | ColumnportStatsPhyIfOutDiscards | read-only | mandatory | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso… |
| 1.3.6.1.4.1.1872.2.1.8.26.1.1.12 | ColumnportStatsPhyIfOutErrors | read-only | mandatory | The number of outbound packets that could not be transmitted because of errors. |
| 1.3.6.1.4.1.1872.2.1.8.26.1.1.13 | ColumnportStatsPhyIfOutQLen | read-only | mandatory | The length of the output packet queue (in packets). |
| 1.3.6.1.4.1.1872.2.1.8.26.1.1.14 | ColumnportStatsPhyIfInBroadcastPkts | read-only | mandatory | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. |
| 1.3.6.1.4.1.1872.2.1.8.26.1.1.15 | ColumnportStatsPhyIfOutBroadcastPkts | read-only | mandatory | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including … |
| 1.3.6.1.4.1.1872.2.1.9.1 | Nodeport-info | |||
| 1.3.6.1.4.1.1872.2.1.9.1.1 | TableportInfoTable | not-accessible | mandatory | The table of port information. |
| 1.3.6.1.4.1.1872.2.1.9.1.1.1 | RowportInfoTableEntry | not-accessible | mandatory | A row in the port information table. |
| 1.3.6.1.4.1.1872.2.1.9.1.1.1.1 | ColumnportInfoIndx | read-only | mandatory | The port index. |
| 1.3.6.1.4.1.1872.2.1.9.1.1.1.2 | ColumnportInfoSpeed | read-only | mandatory | The current operational speed of the port. |
| 1.3.6.1.4.1.1872.2.1.9.1.1.1.3 | ColumnportInfoMode | read-only | mandatory | The current operational mode of the port. |
| 1.3.6.1.4.1.1872.2.1.9.1.1.1.4 | ColumnportInfoFlowCtrl | read-only | mandatory | The current operational flow control of the port. |
| 1.3.6.1.4.1.1872.2.1.9.1.1.1.5 | ColumnportInfoLink | read-only | mandatory | The current operational link status of the port. |
| 1.3.6.1.4.1.1872.2.1.9.1.1.1.6 | ColumnportInfoPhyIfDescr | read-only | mandatory | A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the h… |
| 1.3.6.1.4.1.1872.2.1.9.1.1.1.7 | ColumnportInfoPhyIfType | read-only | mandatory | The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack. |
| 1.3.6.1.4.1.1872.2.1.9.1.1.1.8 | ColumnportInfoPhyIfMtu | read-only | mandatory | The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagr… |
| 1.3.6.1.4.1.1872.2.1.9.1.1.1.9 | ColumnportInfoPhyIfPhysAddress | read-only | mandatory | The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.… |
| 1.3.6.1.4.1.1872.2.1.9.1.1.1.10 | ColumnportInfoPhyIfOperStatus | read-only | mandatory | The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. |
| 1.3.6.1.4.1.1872.2.1.9.1.1.1.11 | ColumnportInfoPhyIfLastChange | read-only | mandatory | The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization o… |
| 1.3.6.1.4.1.1872.2.1.14.3 | NodemirrOper | |||
| 1.3.6.1.4.1.1872.2.1.14.3.1 | ScalarmirrOperMonitoringPort | read-write | mandatory | The switch port where the mirrored traffic are sent to. A zero value indicates this field has not been configured. |
| 1.3.6.1.4.1.1872.2.1.14.3.2 | ScalarmirrOperMirroredPort | read-write | mandatory | The switch port where the egress traffic to be mirrored. A zero value indicates this field has not been configured. |
| 1.3.6.1.4.1.1872.2.1.14.3.3 | ScalarmirrOperType | read-write | mandatory | Type of packets to be sent to the monitor port. in = packets received at the mirrored port out = packets sent from the mirrored port both = packets sent and re… |
| 1.3.6.1.4.1.1872.2.1.14.3.4 | ScalarmirrOperTimeout | read-write | mandatory | The duration in seconds for activating the mirroring rule. Zero means forever. |
| 1.3.6.1.4.1.1872.2.1.14.3.5 | ScalarmirrOperState | read-write | mandatory | Enable or disable port mirroring. |
| 1.3.6.1.4.1.1872.2.1.18 | Nodemirroring | |||
| 1.3.6.1.4.1.1872.2.1.18.1 | NodemirrPortMirr | |||
| 1.3.6.1.4.1.1872.2.1.18.1.1 | ScalarpmCurCfgPortMirrState | read-only | mandatory | The state of port-based port mirroring. |
| 1.3.6.1.4.1.1872.2.1.18.1.2 | ScalarpmNewCfgPortMirrState | read-write | mandatory | The state of port-based port mirroring. |
| 1.3.6.1.4.1.1872.2.1.18.1.3 | TablepmCurCfgPortMonitorTable | not-accessible | mandatory | The table of monitoring ports. |
| 1.3.6.1.4.1.1872.2.1.18.1.3.1 | RowpmCurCfgPortMonitorEntry | not-accessible | mandatory | A row in the monitoring port table. |
| 1.3.6.1.4.1.1872.2.1.18.1.3.1.1 | ColumnpmCurCfgPmirrMoniPortIndex | read-only | mandatory | The monitoring port number. |
| 1.3.6.1.4.1.1872.2.1.18.1.3.1.2 | ColumnpmCurCfgPmirrMirrPortIndex | read-only | mandatory | The mirrored port number |
| 1.3.6.1.4.1.1872.2.1.18.1.3.1.3 | ColumnpmCurCfgPmirrDirection | read-only | mandatory | The type of traffic to be monitored with respect to the mirrored port. |
| 1.3.6.1.4.1.1872.2.1.18.1.4 | TablepmNewCfgPortMonitorTable | not-accessible | mandatory | The table of monitoring ports. |
| 1.3.6.1.4.1.1872.2.1.18.1.4.1 | RowpmNewCfgPortMonitorEntry | not-accessible | mandatory | A row in the monitoring port table. |
| 1.3.6.1.4.1.1872.2.1.18.1.4.1.1 | ColumnpmNewCfgPmirrMoniPortIndex | read-only | mandatory | The monitoring port number. |
| 1.3.6.1.4.1.1872.2.1.18.1.4.1.2 | ColumnpmNewCfgPmirrMirrPortIndex | read-only | mandatory | The mirrored port number |
| 1.3.6.1.4.1.1872.2.1.18.1.4.1.3 | ColumnpmNewCfgPmirrDirection | read-write | mandatory | The type of traffic to be monitored with respect to the mirrored port. |
| 1.3.6.1.4.1.1872.2.1.18.1.4.1.4 | ColumnpmNewCfgPmirrDelete | read-write | mandatory | Setting the value to delete(2) will delete the entire row. When read, other(1) is returned. |
| 1.3.6.1.4.1.1872.2.1.18.2 | NodemirrVlanMirr | |||
| 1.3.6.1.4.1.1872.2.1.18.2.1 | ScalarpmCurCfgVlanMirrState | read-only | mandatory | The state of vlan-based port mirroring. |
| 1.3.6.1.4.1.1872.2.1.18.2.2 | ScalarpmNewCfgVlanMirrState | read-write | mandatory | The state of vlan-based port mirroring. |
| 1.3.6.1.4.1.1872.2.1.18.2.3 | TablepmCurCfgVlanMonitorTable | not-accessible | mandatory | The table of vlan based port mirroring. |
| 1.3.6.1.4.1.1872.2.1.18.2.3.1 | RowpmCurCfgVlanMonitorEntry | not-accessible | mandatory | A row in the monitoring vlan table. |
| 1.3.6.1.4.1.1872.2.1.18.2.3.1.1 | ColumnpmCurCfgVmirrMoniPortIndex | read-only | mandatory | The monitoring port number. |
| 1.3.6.1.4.1.1872.2.1.18.2.3.1.2 | ColumnpmCurCfgVmirrMirrVlanIndex | read-only | mandatory | The mirrored vlan number |
| 1.3.6.1.4.1.1872.2.1.18.2.3.1.3 | ColumnpmCurCfgVmirrDirection | read-only | mandatory | The type of traffic to be monitored with respect to the mirrored vlan. |
| 1.3.6.1.4.1.1872.2.1.18.2.4 | TablepmNewCfgVlanMonitorTable | not-accessible | mandatory | The table of vlan-based port mirroring. |
| 1.3.6.1.4.1.1872.2.1.18.2.4.1 | RowpmNewCfgVlanMonitorEntry | not-accessible | mandatory | A row in the monitoring vlan table. |
| 1.3.6.1.4.1.1872.2.1.18.2.4.1.1 | ColumnpmNewCfgVmirrMoniPortIndex | read-only | mandatory | The monitoring port number. |
| 1.3.6.1.4.1.1872.2.1.18.2.4.1.2 | ColumnpmNewCfgVmirrMirrVlanIndex | read-only | mandatory | The mirrored vlan number |
| 1.3.6.1.4.1.1872.2.1.18.2.4.1.3 | ColumnpmNewCfgVmirrDirection | read-write | mandatory | The type of traffic to be monitored with respect to the mirrored vlan. |
| 1.3.6.1.4.1.1872.2.1.18.2.4.1.4 | ColumnpmNewCfgVmirrDelete | read-write | mandatory | Setting the value to delete(2) will delete the entire row. When read, other(1) is returned. |
| 1.3.6.1.4.1.1872.2.1.19 | NodespannTreeGrpCfg | |||
| 1.3.6.1.4.1.1872.2.1.19.1 | TablestgCurCfgTable | not-accessible | mandatory | The table of Spanning Tree Groups configuration in the current_config. |
| 1.3.6.1.4.1.1872.2.1.19.1.1 | RowstgCurCfgTableEntry | not-accessible | mandatory | Information about a particular Spanning Tree Group configuration. |
| 1.3.6.1.4.1.1872.2.1.19.1.1.1 | ColumnstgCurCfgIndex | read-only | mandatory | The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB. |
| 1.3.6.1.4.1.1872.2.1.19.1.1.2 | ColumnstgCurCfgState | read-only | mandatory | Turn on of off Spanning Tree operation of a particular Spanning Tree Group. |
| 1.3.6.1.4.1.1872.2.1.19.1.1.3 | ColumnstgCurCfgVlanBmap1 | read-only | mandatory | The vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 2048. in receiving order: OC… |
| 1.3.6.1.4.1.1872.2.1.19.1.1.4 | ColumnstgCurCfgVlanBmap2 | read-only | mandatory | The vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 2049 to 4096. in receiving order:… |
| 1.3.6.1.4.1.1872.2.1.19.2 | TablestgNewCfgTable | not-accessible | mandatory | The table of Spanning Tree Groups configuration in the new_config. |
| 1.3.6.1.4.1.1872.2.1.19.2.1 | RowstgNewCfgTableEntry | not-accessible | mandatory | Information about a particular Spanning Tree Group configuration. |
| 1.3.6.1.4.1.1872.2.1.19.2.1.1 | ColumnstgNewCfgIndex | read-only | mandatory | The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB. |
| 1.3.6.1.4.1.1872.2.1.19.2.1.2 | ColumnstgNewCfgState | read-write | mandatory | Turn on of off Spanning Tree operation of a particular Spanning Tree Group. |
| 1.3.6.1.4.1.1872.2.1.19.2.1.3 | ColumnstgNewCfgDefaultCfg | read-write | mandatory | Setting the value to default-config(1) will set the default configuration as recommended by IEEE 802.1D for a particular Spanning Tree Group. default-config (1… |
| 1.3.6.1.4.1.1872.2.1.19.2.1.4 | ColumnstgNewCfgAddVlan | read-write | mandatory | The vlan to be added to the specified Spanning Tree Group. A '0' value is returned when read. |
| 1.3.6.1.4.1.1872.2.1.19.2.1.5 | ColumnstgNewCfgRemoveVlan | read-write | mandatory | The vlan to be removed from the specified Spanning Tree Group. A '0' value is returned when read. |
| 1.3.6.1.4.1.1872.2.1.19.2.1.6 | ColumnstgNewCfgVlanBmap1 | read-only | mandatory | The vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 2048. in receiving order: OC… |
| 1.3.6.1.4.1.1872.2.1.19.2.1.7 | ColumnstgNewCfgVlanBmap2 | read-only | mandatory | The vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 2049 to 4096. in receiving order:… |
| 1.3.6.1.4.1.1872.2.1.19.3 | TablestgCurCfgPortTable | not-accessible | mandatory | The table of Spanning Tree Group port configuration in the current_config. |
| 1.3.6.1.4.1.1872.2.1.19.3.1 | RowstgCurCfgPortTableEntry | not-accessible | mandatory | Information about port configuration of a particular Spanning Tree Group. |
| 1.3.6.1.4.1.1872.2.1.19.3.1.1 | ColumnstgCurCfgStgIndex | read-only | mandatory | The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB. |
| 1.3.6.1.4.1.1872.2.1.19.3.1.2 | ColumnstgCurCfgPortIndex | read-only | mandatory | The port identifier of a particular Spanning Tree Group. |
| 1.3.6.1.4.1.1872.2.1.19.3.1.3 | ColumnstgCurCfgPortState | read-only | mandatory | Turn on of off Spanning Tree operation of a particular port of a Spanning Tree Group. |
| 1.3.6.1.4.1.1872.2.1.19.4 | TablestgNewCfgPortTable | not-accessible | mandatory | The table of Spanning Tree Group port configuration in the new_config. |
| 1.3.6.1.4.1.1872.2.1.19.4.1 | RowstgNewCfgPortTableEntry | not-accessible | mandatory | Information about port configuration of a particular Spanning Tree Group. |
| 1.3.6.1.4.1.1872.2.1.19.4.1.1 | ColumnstgNewCfgStgIndex | read-only | mandatory | The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB. |
| 1.3.6.1.4.1.1872.2.1.19.4.1.2 | ColumnstgNewCfgPortIndex | read-only | mandatory | The port identifier of a particular Spanning Tree Group. |
| 1.3.6.1.4.1.1872.2.1.19.4.1.3 | ColumnstgNewCfgPortState | read-write | mandatory | Turn on of off Spanning Tree operation of a particular port of a Spanning Tree Group. |