AQUARADIO-MIB
67 objects
The mib module for Revolution radio modules. Based on IEEE802dot11 mib module.
Imported Objects
| AQUASYSTEM-MIB | sysSerialNumber sysTrapSequence |
| IF-MIB | ifIndex |
| INFINET-MIB | wanflex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3942.1.1.2 | IdentityaquaradioMIB | The mib module for Revolution radio modules. Based on IEEE802dot11 mib module. | ||
| 1.3.6.1.4.1.3942.1.1.2.1 | TablermPropertiesTable | not-accessible | current | This table contains various radiomodule operation mode settings. |
| 1.3.6.1.4.1.3942.1.1.2.1.1 | RowrmPropertiesEntry | not-accessible | current | An entry in the rmPropertiesTable Table. |
| 1.3.6.1.4.1.3942.1.1.2.1.1.1 | ColumnrmPropertiesIfIndex | read-only | current | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.4.1.3942.1.1.2.1.1.2 | ColumnrmType | read-only | current | Radiomodule type. |
| 1.3.6.1.4.1.3942.1.1.2.1.1.3 | ColumnrmFrequency | read-write | current | This value indicates radiomodule's operating frequency in KHz. |
| 1.3.6.1.4.1.3942.1.1.2.1.1.4 | ColumnrmBitRate | read-write | current | This value indicates radiomodule's current bitrate in kbits per second. |
| 1.3.6.1.4.1.3942.1.1.2.1.1.5 | ColumnrmSid | read-write | current | This value indicates radiomodule's sid. |
| 1.3.6.1.4.1.3942.1.1.2.1.1.6 | ColumnrmCurPowerLevel | read-write | current | This value indicates radiomodule's power output level (tenth dBm). |
| 1.3.6.1.4.1.3942.1.1.2.1.1.7 | ColumnrmModulation | read-write | current | This value indicates radiomodule's modulation type. |
| 1.3.6.1.4.1.3942.1.1.2.1.1.8 | ColumnrmAntenna | read-write | current | This value defines what antenna is used for receiving and transmission. |
| 1.3.6.1.4.1.3942.1.1.2.1.1.9 | ColumnrmDistance | read-write | current | This value indicates radiomodule's distance parameter in kilometers |
| 1.3.6.1.4.1.3942.1.1.2.1.1.10 | ColumnrmBurst | read-write | current | This value indicates whether burst mode support is turned on or off. The burst mode will be active when using MINT protocol and burst mode support is turned on… |
| 1.3.6.1.4.1.3942.1.1.2.1.1.11 | ColumnrmLongRange | read-write | current | This value indicates whether long range mode is turned on or off. Long range mode allows to establish links at long distances. Regretfully, implementation of 8… |
| 1.3.6.1.4.1.3942.1.1.2.1.1.12 | ColumnrmPowerCtl | read-write | current | This value indicates whether automatic power control mode is turned on or off. |
| 1.3.6.1.4.1.3942.1.1.2.1.1.13 | ColumnrmTXRT | read-write | current | This attribute shall indicate the maximum number of transmission attempts of a unicast packet that shall be made before a failure condition is indicated. The d… |
| 1.3.6.1.4.1.3942.1.1.2.1.1.14 | ColumnrmTXVRT | read-write | current | This attribute shall indicate the maximum number of transmission attempts of a unicast packet that shall be made before a failure condition is indicated, when … |
| 1.3.6.1.4.1.3942.1.1.2.1.1.15 | ColumnrmPTP | read-write | current | Turns on or off maximum air utilization mode. Can be used for high-speed point-to-point link, unsuitable for cell organization. (For 2Mbit radiomodules or radi… |
| 1.3.6.1.4.1.3942.1.1.2.1.1.16 | ColumnrmWOCD | read-write | current | Turns on or off WOCD(without carrier detect) mode. Can be used on base station with marker access only. Allows to decrease retry packets number and therefore i… |
| 1.3.6.1.4.1.3942.1.1.2.1.1.17 | ColumnrmBCsid | read-write | current | Turns on or off sid broadcast mode for greater security of the network. When sid broadcast is turned off, all devices in the network must have sid value set ex… |
| 1.3.6.1.4.1.3942.1.1.2.1.1.18 | ColumnrmDistanceAuto | read-write | current | Turns on or off automatic adjustment of distance parameter. |
| 1.3.6.1.4.1.3942.1.1.2.1.1.19 | ColumnrmNoiseFloor | read-only | current | The current noise floor in dBm. |
| 1.3.6.1.4.1.3942.1.1.2.1.1.20 | ColumnrmBandwidth | read-write | current | Current radio channel size in KHz. |
| 1.3.6.1.4.1.3942.1.1.2.1.1.21 | ColumnrmChainMode | read-only | current | Radio channel technology. |
| 1.3.6.1.4.1.3942.1.1.2.1.1.22 | ColumnrmSelectChannel | read-write | current | 0 is always returned for GET operations. For SET operation: 1 means 'change frequency if better choice exists, else keep current value'; 2 means 'change freque… |
| 1.3.6.1.4.1.3942.1.1.2.4 | TablermPowerLevelsTable | not-accessible | current | This table contains radiomodule power level capabilities. |
| 1.3.6.1.4.1.3942.1.1.2.4.1 | RowrmPowerLevelsEntry | not-accessible | current | An entry in the rmPowerLevelsTable table. |
| 1.3.6.1.4.1.3942.1.1.2.4.1.1 | ColumnrmPowerLevelsIfIndex | read-only | current | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.4.1.3942.1.1.2.4.1.2 | ColumnrmPowerLevelsValIndex | read-only | current | The index value which uniquely identifies one of possible values of power level for interface selected by rmPowerLevelsIfIndex. |
| 1.3.6.1.4.1.3942.1.1.2.4.1.3 | ColumnrmPowerLevelsPower | read-only | current | This value indicates possible power level (tenth dBm). |
| 1.3.6.1.4.1.3942.1.1.2.5 | TablermFrequenciesTable | not-accessible | current | This table contains radiomodule frequency capabilities. |
| 1.3.6.1.4.1.3942.1.1.2.5.1 | RowrmFrequenciesEntry | not-accessible | current | An entry in the rmFrequenciesTable table. |
| 1.3.6.1.4.1.3942.1.1.2.5.1.1 | ColumnrmFrequenciesIfIndex | read-only | current | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.4.1.3942.1.1.2.5.1.2 | ColumnrmFrequenciesValIndex | read-only | current | The index value which uniquely identifies one of possible values of frequency for interface selected by rmFrequenciesIfIndex. |
| 1.3.6.1.4.1.3942.1.1.2.5.1.3 | ColumnrmFrequenciesFreq | read-only | current | This value indicates possible frequency in MHz. |
| 1.3.6.1.4.1.3942.1.1.2.6 | TablermBitratesTable | not-accessible | current | This table contains radiomodule bitrate capabilities. |
| 1.3.6.1.4.1.3942.1.1.2.6.1 | RowrmBitratesEntry | not-accessible | current | An entry in the rmBitratesTable table. |
| 1.3.6.1.4.1.3942.1.1.2.6.1.1 | ColumnrmBitratesIfIndex | read-only | current | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.4.1.3942.1.1.2.6.1.2 | ColumnrmBitratesValIndex | read-only | current | The index value which uniquely identifies one of possible values of bitrate for interface selected by rmBitratesIfIndex. |
| 1.3.6.1.4.1.3942.1.1.2.6.1.3 | ColumnrmBitratesBitrate | read-only | current | This value indicates possible bitrate in bits per second. |
| 1.3.6.1.4.1.3942.1.1.2.7 | TableradioStatTable | not-accessible | current | A table of packet statistics for each of the links (by MAC address). |
| 1.3.6.1.4.1.3942.1.1.2.7.1 | RowradioStatEntry | not-accessible | current | Each entry contains statistics for one link (MAC address). |
| 1.3.6.1.4.1.3942.1.1.2.7.1.1 | ColumnradioStatMacAddress | read-only | current | MAC address of the rf interface link is established with. |
| 1.3.6.1.4.1.3942.1.1.2.7.1.2 | ColumnradioStatPackets | read-only | current | Number of unique packets sent to this MAC address. |
| 1.3.6.1.4.1.3942.1.1.2.7.1.3 | ColumnradioStatRepeats | read-only | current | Number of repeat packets tries sent to this MAC address. |
| 1.3.6.1.4.1.3942.1.1.2.7.1.4 | ColumnradioStatRepeatPackets | read-only | current | Number of unique repeat packets sent to this MAC address. |
| 1.3.6.1.4.1.3942.1.1.2.7.1.5 | ColumnradioStatBytes | read-only | current | Number of bytes in unique packets sent to this MAC address. |
| 1.3.6.1.4.1.3942.1.1.2.7.1.6 | ColumnradioStatRepeatBytes | read-only | current | Number of bytes in repeat packets tries sent to this MAC address. |
| 1.3.6.1.4.1.3942.1.1.2.7.1.7 | ColumnradioStatErrors | read-only | current | Number of errors when attempted to send a packet to this MAC address. |
| 1.3.6.1.4.1.3942.1.1.2.7.1.8 | ColumnradioStatRecvPackets | read-only | current | Number of unique packets received from this MAC address. |
| 1.3.6.1.4.1.3942.1.1.2.7.1.9 | ColumnradioStatRecvBytes | read-only | current | Number of bytes in unique packets received from this MAC address. |
| 1.3.6.1.4.1.3942.1.1.2.8 | TablermBandsTable | not-accessible | current | This table contains radiomodule possible bandwidths. |
| 1.3.6.1.4.1.3942.1.1.2.8.1 | RowrmBandsEntry | not-accessible | current | An entry in the rmBandsTable. |
| 1.3.6.1.4.1.3942.1.1.2.8.1.1 | ColumnrmBandsIfIndex | read-only | current | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.4.1.3942.1.1.2.8.1.2 | ColumnrmBandsValIndex | read-only | current | The index value which uniquely identifies one of possible values of bandwidth for interface selected by rmBandsIfIndex. |
| 1.3.6.1.4.1.3942.1.1.2.8.1.3 | ColumnrmBandsBand | read-only | current | This value indicates one of possible bandwidth in Hz for interface selected by rmBandsIfIndex. |
| 1.3.6.1.4.1.3942.1.1.2.17 | NodeaquaradioMIBNotificationsPrefix | |||
| 1.3.6.1.4.1.3942.1.1.2.17.0 | NodeaquaradioMIBnotifications | |||
| 1.3.6.1.4.1.3942.1.1.2.17.0.1 | NotificationradioFreqChanged | current | A radioFreqChangedNotification is sent when frequency is changed on radio interface. | |
| 1.3.6.1.4.1.3942.1.1.2.17.0.2 | NotificationradioBandChanged | current | A radioBandChangedNotification is sent when bandwidth is changed on radio interface. | |
| 1.3.6.1.4.1.3942.1.1.2.18 | NodeaquaradioMIBConformance | |||
| 1.3.6.1.4.1.3942.1.1.2.18.1 | NodeaquaradioMIBCompliances | |||
| 1.3.6.1.4.1.3942.1.1.2.18.1.1 | ComplianceaquaradioMIBCompliance | current | The compliance statement for Infinet wireless routers. | |
| 1.3.6.1.4.1.3942.1.1.2.18.2 | NodeaquaradioMIBGroups | |||
| 1.3.6.1.4.1.3942.1.1.2.18.2.1 | GroupradioGroup | current | The radio group of objects providing for management of radiomodule parameters, including IEEE 802.11 parameters and proprietary parameters. | |
| 1.3.6.1.4.1.3942.1.1.2.18.3 | GroupaquaradioNotifications | current |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| RadioSID | Integer32 | current | Represents Radio System Identifier |