ARUBAWIRED-POE-MIB
54 objects
This MIB module describes management objects that manage Power Source Equipment (PSE). This is the MIB module related to HPE Aruba PoE
Imported Objects
| ARUBAWIRED-NETWORKING-OID | wndFeatures |
| POWER-ETHERNET-MIB | pethMainPseEntry pethPsePortEntry |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.47196.4.1.1.3.8 | IdentityarubaWiredPoeMIB | This MIB module describes management objects that manage Power Source Equipment (PSE). This is the MIB module related to HPE Aruba PoE | ||
| 1.3.6.1.4.1.47196.4.1.1.3.8.1 | NodearubaWiredPoePethPsePort | |||
| 1.3.6.1.4.1.47196.4.1.1.3.8.1.1 | TablearubaWiredPoePethPsePortTable | not-accessible | current | A table of objects that display and control the power characteristics of power Ethernet ports on a Power Source Entity (PSE) device. This group will be impleme… |
| 1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1 | RowarubaWiredPoePethPsePortEntry | not-accessible | current | The fields in these entries will be used to supplement fields in 'pethPsePortEntry in ieee802af.mib. |
| 1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.1 | ColumnarubaWiredPoePethPsePortPowerAllocateBy | read-write | current | Allows control over the power allocation strategy used for this port. Two power allocation strategies are class(2) and usage(1). When allocating by usage(1) po… |
| 1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.2 | ColumnarubaWiredPoePethPsePortPreStdDetect | read-only | current | This field specifies the pre standard detect configuration for this port. A value of on - indicates that pre-802.3af-standard devices to power on. A value of o… |
| 1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.3 | ColumnarubaWiredPoePethPsePortRpd | read-only | current | Rapid Power Down is executed by the hardware in the event of a power-supply failure. It quickly cuts power to a PD to prevent an over-current scenario in the P… |
| 1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.4 | ColumnarubaWiredPoePethPsePortCurrent | read-only | current | This field specifies the current supplied at this port. This value is specified in milliamperes(mA). |
| 1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.5 | ColumnarubaWiredPoePethPsePortVoltage | read-only | current | This field specifies the Voltage supplied at this port. This value is specified in 10's of Volts (dV). |
| 1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.6 | ColumnarubaWiredPoePethPsePortReservedPower | read-only | current | This field specifies quantum of power which has been reserved for the PD at this port. This value is specified in milliwatts (mW). |
| 1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.7 | ColumnarubaWiredPoePethPsePortPowerDrawn | read-only | current | This field specifies quantum of power which has indicating the actual power drawn by powered device(PD). This value is specified in milliwatts (mW). |
| 1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.8 | ColumnarubaWiredPoePethPsePortAveragePower | read-only | current | This field specifies the average power in milliwatts drawn by the powered device (PD) on this port. |
| 1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.9 | ColumnarubaWiredPoePethPsePortPeakPower | read-only | current | This field specifies the peak power supplied in milliwatts to the powered device (PD) connected to this port. |
| 1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.10 | ColumnarubaWiredPoePethPsePortOperStatus | read-only | current | This field specifies the operational status of the port. |
| 1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.11 | ColumnarubaWiredPoePethPsePortPdSignature | read-only | current | This Signature value represents the PD signature. This variable is valid only while a PD is detected. In 802.3af and 802.3at standards the power controller on … |
| 1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.12 | ColumnarubaWiredPoePethPsePortPowerClassification | read-only | current | A read-only value that indicates the PD Class of a detected PD. Classification is a way to tag different terminals on the Power over LAN network according to t… |
| 1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.13 | ColumnarubaWiredPoePethPsePortPseAssignedClass | read-only | current | This field indicates the actual class assigned by PSE to the PD. Class demotion allows the PSE to allocate less than the PD requested power based on the PD req… |
| 1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.14 | ColumnarubaWiredPoePethPsePortPoECycle | read-write | current | This object is used for PoE port reset with timeout of 1-60s. PoE interface is disabled and then enabled with timeout as input. |
| 1.3.6.1.4.1.47196.4.1.1.3.8.1.2 | TablearubaWiredPoePethPseFourPairPortTable | not-accessible | current | A table of objects that display and control the power characteristics of power Ethernet ports on a Power Source Entity (PSE) device. This group will be impleme… |
| 1.3.6.1.4.1.47196.4.1.1.3.8.1.2.1 | RowarubaWiredPoePethPseFourPairPortEntry | not-accessible | current | The fields in these entries will be used to supplement fields in 'pethPsePortEntry in ieee802af.mib. |
| 1.3.6.1.4.1.47196.4.1.1.3.8.1.2.1.1 | ColumnarubaWiredPoePethPsePortDetectionStatusPairA | read-only | current | Describes the operational status of the port PD detection. A value of deliveringPowerAltA - indicates that the PSE State diagram is in the state POWER_ON_PRI i… |
| 1.3.6.1.4.1.47196.4.1.1.3.8.1.2.1.2 | ColumnarubaWiredPoePethPsePortDetectionStatusPairB | read-only | current | Describes the operational status of the port PD detection. A value of deliveringPowerAltB - indicates that the PSE State diagram is in the state POWER_ON_SEC i… |
| 1.3.6.1.4.1.47196.4.1.1.3.8.1.2.1.3 | ColumnarubaWiredPoePethPsePortPowerClassificationPairA | read-only | current | A read-only value that indicates the PD Class of a detected dual-signature PD on paira. Classification is a way to tag different terminals on the Power over LA… |
| 1.3.6.1.4.1.47196.4.1.1.3.8.1.2.1.4 | ColumnarubaWiredPoePethPsePortPowerClassificationPairB | read-only | current | A read-only value that indicates the PD Class of a detected dual-signature PD on paira. Classification is a way to tag different terminals on the Power over LA… |
| 1.3.6.1.4.1.47196.4.1.1.3.8.1.2.1.5 | ColumnarubaWiredPoePethPsePortPseAssignedClassA | read-only | current | This field indicates the actual class assigned by PSE to the PD. Class demotion allows the PSE to allocate less than the PD requested power based on the PD req… |
| 1.3.6.1.4.1.47196.4.1.1.3.8.1.2.1.6 | ColumnarubaWiredPoePethPsePortPseAssignedClassB | read-only | current | This field indicates the actual class assigned by PSE to the PD. Class demotion allows the PSE to allocate less than the PD requested power based on the PD req… |
| 1.3.6.1.4.1.47196.4.1.1.3.8.1.2.1.7 | ColumnarubaWiredPoePethPsePortInvalidSignatureCounterPairA | read-only | current | This counter is incremented when the PSE state diagram enters the state SIGNATURE_INVALID, if alt_pri='a'. |
| 1.3.6.1.4.1.47196.4.1.1.3.8.1.2.1.8 | ColumnarubaWiredPoePethPsePortInvalidSignatureCounterPairB | read-only | current | This counter is incremented when the PSE state diagram enters the state SIGNATURE_INVALID, if alt_pri='b' |
| 1.3.6.1.4.1.47196.4.1.1.3.8.1.2.1.9 | ColumnarubaWiredPoePethPsePortPowerDeniedCounterPairA | read-only | current | This counter is incremented when the PSE state diagram enters the state POWER_DENIED, if alt_pri='a'. |
| 1.3.6.1.4.1.47196.4.1.1.3.8.1.2.1.10 | ColumnarubaWiredPoePethPsePortPowerDeniedCounterPairB | read-only | current | This counter is incremented when the PSE state diagram enters the state POWER_DENIED, if alt_pri='b'. |
| 1.3.6.1.4.1.47196.4.1.1.3.8.1.2.1.11 | ColumnarubaWiredPoePethPsePortOverLoadCounterPairA | read-only | current | This counter is incremented when the PSE state diagram enters the state ERROR_DELAY_OVER, if alt_pri='a'. |
| 1.3.6.1.4.1.47196.4.1.1.3.8.1.2.1.12 | ColumnarubaWiredPoePethPsePortOverLoadCounterPairB | read-only | current | This counter is incremented when the PSE state diagram enters the state ERROR_DELAY_OVER, if alt_pri='b'. |
| 1.3.6.1.4.1.47196.4.1.1.3.8.1.2.1.13 | ColumnarubaWiredPoePethPsePortMPSAbsentCounterPairA | read-only | current | This counter is incremented when the PSE state diagram transitions directly from the state POWER_ON to the state IDLE due to tmpdo_timer_done being asserted, i… |
| 1.3.6.1.4.1.47196.4.1.1.3.8.1.2.1.14 | ColumnarubaWiredPoePethPsePortMPSAbsentCounterPairB | read-only | current | This counter is incremented when the PSE state diagram transitions directly from the state POWER_ON to the state IDLE due to tmpdo_timer_done being asserted, i… |
| 1.3.6.1.4.1.47196.4.1.1.3.8.2 | NodearubaWiredPoeConformance | |||
| 1.3.6.1.4.1.47196.4.1.1.3.8.2.1 | NodearubaWiredPoeCompliances | |||
| 1.3.6.1.4.1.47196.4.1.1.3.8.2.1.1 | CompliancearubaWiredPoeCompliance | current | A compliance statement for HP Routing switches with PoE capability. | |
| 1.3.6.1.4.1.47196.4.1.1.3.8.2.2 | NodearubaWiredPoeGroups | |||
| 1.3.6.1.4.1.47196.4.1.1.3.8.2.2.1 | GrouparubaWiredPoePethPsePortTableGroup | current | A collection of objects display configuration, status, PD information and mesurements of PoE PSE Port table. | |
| 1.3.6.1.4.1.47196.4.1.1.3.8.2.2.2 | GrouparubaWiredPoePethPseFourPairPortTableGroup | current | A collection of objects display four pair paramentets of each pair PD information, status, and counters of PoE PSE Port table. | |
| 1.3.6.1.4.1.47196.4.1.1.3.8.2.2.3 | GrouparubaWiredPoePethMainPseTableGroup | current | A Collection of Object(s) that provide information about each power source equipment instance. | |
| 1.3.6.1.4.1.47196.4.1.1.3.8.2.2.4 | GrouparubaWiredPoePethPseModuleTableGroup | current | A Collection of Object(s) that provide AlwaysOnPoe information about each module on switch. | |
| 1.3.6.1.4.1.47196.4.1.1.3.8.3 | NodearubaWiredPoePethMainPse | |||
| 1.3.6.1.4.1.47196.4.1.1.3.8.3.1 | TablearubaWiredPoePethMainPseTable | not-accessible | current | A table of objects that display and control attributes of the main power source in a PSE device. Ethernet switches are one example of boxes that would support … |
| 1.3.6.1.4.1.47196.4.1.1.3.8.3.1.1 | RowarubaWiredPoePethMainPseEntry | not-accessible | current | The fields in these entries will be used to supplement fields in 'pethMainPseEntry in ieee802af.mib. |
| 1.3.6.1.4.1.47196.4.1.1.3.8.3.1.1.1 | ColumnarubaWiredPoePethMainPseReservedPower | read-only | current | This field specifies the power in Watts, in the switch available for PoE power delivery. This power is available only for subsystems of type chassis, as power … |
| 1.3.6.1.4.1.47196.4.1.1.3.8.3.1.1.2 | ColumnarubaWiredPoePethMainPseFailoverPower | read-only | current | This field specifies the power in Watts, in the switch available for PoE power delivery when a single power supply failure happens. This power is available onl… |
| 1.3.6.1.4.1.47196.4.1.1.3.8.3.1.1.3 | ColumnarubaWiredPoePethMainPseRedundantPower | read-only | current | This field specifies power in Watts reserved by power supply based on power redundancy configurations. This power is available only for subsystems of type chas… |
| 1.3.6.1.4.1.47196.4.1.1.3.8.4 | NodearubaWiredPoePethPseModule | |||
| 1.3.6.1.4.1.47196.4.1.1.3.8.4.1 | TablearubaWiredPoePethPseModuleTable | not-accessible | current | A table of objects contains the AlwaysOnPoe status information on module. |
| 1.3.6.1.4.1.47196.4.1.1.3.8.4.1.1 | RowarubaWiredPoePethPseModuleEntry | not-accessible | current | The fields in these entries will be used to display alwaysonpoe status information on specific module. |
| 1.3.6.1.4.1.47196.4.1.1.3.8.4.1.1.1 | ColumnarubaWiredPoePethPseModuleGroupIndex | not-accessible | current | This variable uniquely identifies the group containing the module to which a power Ethernet PSE is connected. Group means box in the stack and the value 1 MUST… |
| 1.3.6.1.4.1.47196.4.1.1.3.8.4.1.1.2 | ColumnarubaWiredPoePethPseModuleSlotIndex | not-accessible | current | This variable uniquely identifies the module in a switch and value 1 must be used for non-modular devices. |
| 1.3.6.1.4.1.47196.4.1.1.3.8.4.1.1.3 | ColumnarubaWiredPoePethPseModuleAlwaysOnPoe | read-only | current | Alwayson PoE is a feature that provides the ability for a switch to continue to provide power across a soft reboot. Value on(2) indicates Always-on PoE feature… |