ASAM-SYSTEM-MIB
143 objects
No module-level DESCRIPTION found.
Imported Objects
| ASAM-EQUIP-MIB | EqptSlotIndex |
| ASAM-TC-MIB | NetworkTimeInMiliSeconds NetworkTimeInSeconds |
| BRIDGE-MIB | MacAddress |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter Gauge IpAddress |
| SNMPv2-SMI | Unsigned32 |
| SNMPv2-TC | DateAndTime RowStatus TruthValue |
| SYSTEM-MIB | asam |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.637.61.1.9 | NodeasamSystemMIB | |||
| 1.3.6.1.4.1.637.61.1.9.2 | NodeasamSysBootpInfo | |||
| 1.3.6.1.4.1.637.61.1.9.2.1 | ScalarasamSystemIpAtmVcVpi | read-write | mandatory | To issue a BOOTP request over an ATM connection on the network interface, a PVC must be defined. This is the VPI value for that PVC. ALCATEL NOTE: SUPPORT: NO … |
| 1.3.6.1.4.1.637.61.1.9.2.2 | ScalarasamSystemIpAtmVcVci | read-write | mandatory | To issue a BOOTP request over an ATM connection on the network interface, a PVC must be defined. This is the VCI value for that PVC. ALCATEL NOTE: SUPPORT: NO … |
| 1.3.6.1.4.1.637.61.1.9.3 | ScalarasamSystemID | read-write | mandatory | The asamSystemID object represents the SID (System ID) of the NE and is used to identify the NE. The System ID may only include printable ASCII characters from… |
| 1.3.6.1.4.1.637.61.1.9.4 | ScalarasamSysStatusBitMap | read-only | mandatory | Status bitmap: Bit 0: bit 0 is set if and only if none of the other bits is set. Bit 1: bit 1 set indicates that persistent data has been lost including data n… |
| 1.3.6.1.4.1.637.61.1.9.5 | ScalarasamSysStatusClearBitMap | write-only | mandatory | Clear status bitmap: In order to be able to clear the status bitmap, e.g. to clear the loss of persistent data alarm, this bitmap has to be used by writing a 1… |
| 1.3.6.1.4.1.637.61.1.9.6 | ScalarasamSysStatusSetBitMap | write-only | obsolete | Set status bitmap: In order to be able to set the status bitmap, this bitmap has to be used by writing a 1 to the corresponding bit position. |
| 1.3.6.1.4.1.637.61.1.9.7 | ScalarasamAWSnumberOfSets | read-write | obsolete | Reserved for AWS for synchronisation purposes. |
| 1.3.6.1.4.1.637.61.1.9.8 | ScalarasamDiskStatusBitMap | read-write | obsolete | Disk status bitmap: Bit 0: by setting bit 0, all persistent data is synced (forced) to disk. Bit 1: by setting bit 1, the ASAM disk is locked, otherwise the AS… |
| 1.3.6.1.4.1.637.61.1.9.9 | ScalarasamShutdownBitMap | read-write | mandatory | Shutdown bitmap: Bit 0: by setting bit 0, the ASAM is prepared for shutdown; it is recommended to do this before extracting the active NT in a simplex system; … |
| 1.3.6.1.4.1.637.61.1.9.10 | ScalarasamNetworkPosition | read-write | obsolete | Indicates whether the ASAM is a hub-ASAM (1) or a subtending ASAM. The default is hub-ASAM. |
| 1.3.6.1.4.1.637.61.1.9.11 | NodeasamSystemMigration | |||
| 1.3.6.1.4.1.637.61.1.9.11.1 | ScalarasamMigrationStatus | read-write | obsolete | The asamMigrationStatus object represent the ASAM's status for what concerns its migration capabilities. Whereas two of the six values, viz. 'forceRollBack' an… |
| 1.3.6.1.4.1.637.61.1.9.12 | NodeasamSystemClockSelect | |||
| 1.3.6.1.4.1.637.61.1.9.13 | ScalarasamMibVersion | read-only | mandatory | This variable identifies the version of the management interface of the ASAM, i.e. it uniquely identifies the complete set of MIBs that together constitute the… |
| 1.3.6.1.4.1.637.61.1.9.15 | ScalarasamSystemInitProgress | read-only | mandatory | Progress of the system initialization indicated as a percentage. When the system starts its initialization, it will at first not be reachable for SNMP managers… |
| 1.3.6.1.4.1.637.61.1.9.16 | ScalarasamPnPEnable | read-write | mandatory | This variable allows the manager to enable/disable the Plug-and-Play functionality. When enabled, the ASAM will, upon installation, start up autonomously witho… |
| 1.3.6.1.4.1.637.61.1.9.17 | NodeasamSystemLicenseMgmt | |||
| 1.3.6.1.4.1.637.61.1.9.17.1 | ScalarasamLicenseNumberOfChanges | read-only | mandatory | Wrap around counter for the number of changes of the licenseCounter object. The counter is incremented each time the licenseCounter is incremented for one of t… |
| 1.3.6.1.4.1.637.61.1.9.17.2 | TableasamSystemLicenseMgmtTable | not-accessible | mandatory | The license key management table. |
| 1.3.6.1.4.1.637.61.1.9.17.2.1 | RowasamSystemLicenseMgmtEntry | not-accessible | mandatory | An entry in the asamSystemLicenseMgmtTable. |
| 1.3.6.1.4.1.637.61.1.9.17.2.1.1 | ColumnlicenseFeatureIndex | not-accessible | mandatory | This object is used by the asamSystemLicenseMgmtTable to identify a row of this table. Each row corresponds to a system feature that is monitored to support li… |
| 1.3.6.1.4.1.637.61.1.9.17.2.1.2 | ColumnlicenseCounter | read-only | mandatory | The counter associated with the monitoring of the feature that corresponds to the licenseFeatureIndex value. 1. For ADSL2+, the counter indicates the number of… |
| 1.3.6.1.4.1.637.61.1.9.17.3 | ScalarsystemMaxLtLinkSpeed | read-write | mandatory | An enum indicating high capacity is enabled. Applicable for high capacity NT's. This object is not applicable to ISAM 7367 SX / 7363 MX systems (Standalone Sin… |
| 1.3.6.1.4.1.637.61.1.9.20 | ScalarasamSuperuserAuthByRadius | read-write | mandatory | The TL1/CLI user ID SUPERUSER/isadmin is optionally authenticated by RADIUS based on this object. When disabled, SUPERUSER/isadmin is always authenticated by t… |
| 1.3.6.1.4.1.637.61.1.9.22 | NodeasamSysMacAdresses | |||
| 1.3.6.1.4.1.637.61.1.9.22.1 | ScalarsystemMac | read-write | mandatory | On ISAM FD with SHUB: Specifies MAC address of the LANX interface(100baseT) of the NT This field should/must only be modified when the shelf does not support t… |
| 1.3.6.1.4.1.637.61.1.9.22.2 | ScalarlanxBaseMac | read-write | mandatory | Identifies the LANX MAC start adress. This field should/must only be modified when the shelf does not support the SMAS functionality. This object is not applic… |
| 1.3.6.1.4.1.637.61.1.9.22.3 | ScalarlanxRangeMac | read-write | mandatory | Specifies the range of MAC adresses on LANX. The LANX MAC address range is currently equal to 24(number of LANX interfaces). This field should/must only be mod… |
| 1.3.6.1.4.1.637.61.1.9.22.4 | ScalaroutbandManMac | read-write | mandatory | Specifies Outband Management MACAddress. This field should/must only be modified when the shelf does not support the SMAS functionality. This object is not app… |
| 1.3.6.1.4.1.637.61.1.9.24 | ScalartimeZoneOffset | read-write | mandatory | This object allows a manager to set the Time Zone Offset of the system. ALCATEL NOTE: SUPPORT: YES PERSIST: YES INSRVMOD: NA RANGE: -780...840 DEFVALUE: 0 UNIT… |
| 1.3.6.1.4.1.637.61.1.9.25 | NodeasamCraftLogin | |||
| 1.3.6.1.4.1.637.61.1.9.25.1 | ScalarasamCraftLoginStatus | read-only | mandatory | Specifies whether user has been logged in or not 1-user logged in 0-no user logged in. SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: NA UNI… |
| 1.3.6.1.4.1.637.61.1.9.26 | NodeasamAccessLoopIdSyntax | |||
| 1.3.6.1.4.1.637.61.1.9.26.1 | ScalarasamPortNumberingMethodSystem | read-write | mandatory | This object defines the Line ID format at the system level. logicalSlotId (1) is a numbering method defined for equipment identification in the MIB. positionBa… |
| 1.3.6.1.4.1.637.61.1.9.26.3 | ScalarasamAccessLoopAtmBasedDslSyntax | read-write | mandatory | This variable defines the syntax for generating a loop id for ATM based DSL lines terminated by DSL LT. It is a string to define a specified format at system l… |
| 1.3.6.1.4.1.637.61.1.9.26.4 | ScalarasamAccessLoopEthBasedDslSyntax | read-write | mandatory | This variable defines the syntax for generating a loop id for Ethernet based DSL lines terminated by DSL LT and for Ethernet lines terminated by Ethernet LT. I… |
| 1.3.6.1.4.1.637.61.1.9.26.5 | ScalarasamAccessLoopEthBasedPonSyntax | read-write | mandatory | This variable defines the syntax for generating a loop id for Ethernet based DSL line terminated by GPON ONTs, and for Ethernet lines terminated by GPON ONTs. … |
| 1.3.6.1.4.1.637.61.1.9.26.6 | ScalarasamAccessLoopEthBasedEPonSyntax | read-write | mandatory | This variable defines the syntax for generating a loop id for Ethernet based DSL line terminated by EPON ONTs, and for Ethernet lines terminated by EPON ONTs. … |
| 1.3.6.1.4.1.637.61.1.9.26.7 | ScalarasamAccessLoopEthBasedNgpon2Syntax | read-write | mandatory | This variable defines the syntax for generating a loop id for Ethernet based DSL line terminated by NGPON2 ONTs, and for Ethernet lines terminated by NGPON2 ON… |
| 1.3.6.1.4.1.637.61.1.9.26.8 | ScalarasamAccessLoopNtPortSyntax | read-write | mandatory | This variable defines the syntax for generating a access loop id for NT ports. It is a string to define a specified format at system level. ALCATEL NOTE: SUPPO… |
| 1.3.6.1.4.1.637.61.1.9.27 | NodeenvironmentMonitorRelay | |||
| 1.3.6.1.4.1.637.61.1.9.27.1 | ScalarenvironmentMonitorRelayMode | read-write | mandatory | This variable allows the manager to enable/disable the environment monitoring relay functionality. When enabled, the environment data will be relayed between m… |
| 1.3.6.1.4.1.637.61.1.9.28 | NodeswVersion | |||
| 1.3.6.1.4.1.637.61.1.9.28.1 | ScalarswEtsiVersion | read-only | mandatory | This object holds the Software version for ETSI market. (e.g. R4.1). It will be empty if not supported for ETSI market. To ease parsing by AMS, the format of t… |
| 1.3.6.1.4.1.637.61.1.9.28.2 | ScalarswAnsiVersion | read-only | mandatory | This object holds the Software version for ANSI market. (such as FGN4.1.0). It will be empty if not supported for ANSI market. To ease parsing by AMS, the form… |
| 1.3.6.1.4.1.637.61.1.9.29 | NodesystemMonitor | |||
| 1.3.6.1.4.1.637.61.1.9.29.1 | TablecpuLoadTable | not-accessible | mandatory | The CPU load monitor table. ALCATEL NOTE: TABLESIZE: max nmbr of slots |
| 1.3.6.1.4.1.637.61.1.9.29.1.1 | RowcpuLoadEntry | not-accessible | mandatory | An entry in the cpuLoadTable. The index of the entry is slotId. An entry represents the CPU load of the board in the slot. The CPU load includes detail value a… |
| 1.3.6.1.4.1.637.61.1.9.29.1.1.1 | ColumnslotId | read-only | mandatory | the slotId has the same value as eqptSlotId of ASAM-EQUIP-MIB. ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: NA DEFVALUE: 0 UNITS: NA SPAR… |
| 1.3.6.1.4.1.637.61.1.9.29.1.1.2 | ColumnstartMonitorTime | read-only | mandatory | The start timestamp of CPU load monitor is the network time in seconds. It indicates the start time of last 3 minutes or less monitoring. The startMonitorTime … |
| 1.3.6.1.4.1.637.61.1.9.29.1.1.3 | ColumncpuLoadDetail | read-only | mandatory | The cpuLoadDetail object represents the CPU load percent value (x100%) in detail for 180 measurement points. The length of this object is always 180 octets. On… |
| 1.3.6.1.4.1.637.61.1.9.29.1.1.4 | ColumncpuLoadAverage | read-only | mandatory | The average value of CPU load. It is percent value (x100%). It is the average of detail CPU load value. One sample is generated for each second during CPU load… |
| 1.3.6.1.4.1.637.61.1.9.29.1.1.5 | ColumnoperateStatus | read-write | mandatory | The operate status for start/stop CPU load monitoring operation. The maximum measurement time is 180 seconds. One sample is generated for a second. The maximum… |
| 1.3.6.1.4.1.637.61.1.9.29.2 | TablememUsageTable | not-accessible | mandatory | The memory usage monitor table. |
| 1.3.6.1.4.1.637.61.1.9.29.2.1 | RowmemUsageEntry | not-accessible | mandatory | An entry in the memUsageTable. The index of the entry is slotId. An entry represents the memory usage of the board in the slot. The memory usage includes total… |
| 1.3.6.1.4.1.637.61.1.9.29.2.1.1 | ColumntotalMemSize | read-only | mandatory | The total memory size on board. It just indicates the size of total semi and dynamical memory. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NO RANGE: NA PERSIST: NO DE… |
| 1.3.6.1.4.1.637.61.1.9.29.2.1.2 | ColumnmemAbsoluteUsage | read-only | mandatory | The used memory size in absolute value. It indicates total used size of semi and dynamical memory. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NO RANGE: NA PERSIST: N… |
| 1.3.6.1.4.1.637.61.1.9.33 | ScalarasamSystemAccessOperatorID | read-write | mandatory | The Access Operator ID is a unique identifier representing an operator. This identifier is randomly generated by ALU, then assigned to an operator. The identif… |
| 1.3.6.1.4.1.637.61.1.9.34 | ScalarasamSystemActivatedCDE | read-only | mandatory | The Activated CDE is a bitmap listing the CDE features that are active. CDE features are activated during system startup only, and are based on the configured … |
| 1.3.6.1.4.1.637.61.1.9.35 | ScalarasamSystemPortAddressingMode | read-write | mandatory | This object allows the manager to configure the faceplate port addressing mode used by operators in CLI and TL1. With the mode set to <sequential>, the operato… |
| 1.3.6.1.4.1.637.61.1.9.36 | TableperipheralMgntMacFilterTable | not-accessible | mandatory | The peripheral management mac filter table. For enhanced security in remote cabinets, it is possible to restrict allowed destination MAC addresses in upstream … |
| 1.3.6.1.4.1.637.61.1.9.36.1 | RowperipheralMgntMacFilterEntry | not-accessible | mandatory | A filter entry in the management mac filter table. On the NRCD-B the filter is a filter on the destination mac address of the frames received over this port. O… |
| 1.3.6.1.4.1.637.61.1.9.36.1.1 | ColumnperipheralMgntMacFilterIndex | not-accessible | mandatory | The index for the peripheralMgntMacFilter table. A maximum of 20 mac filters is supported. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: 1..20 PERSIST: YES D… |
| 1.3.6.1.4.1.637.61.1.9.36.1.2 | ColumnperipheralMgntMacFilterMacRangeFirst | read-write | mandatory | Specifies the first MAC address of the allowed range. Default value 00.00.00.00.00.00 ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEF… |
| 1.3.6.1.4.1.637.61.1.9.36.1.3 | ColumnperipheralMgntMacFilterMacRangeLast | read-write | mandatory | Specifies the last MAC address of the allowed range. At least the OUI part should match the OUI of the peripheralMgntMacFilterMacRangeFirst MAC address. Defaul… |
| 1.3.6.1.4.1.637.61.1.9.37 | ScalarasamLiSeparate | read-write | mandatory | Parameter used to create a separate LI management plane; i.e to restrict creation/modification of operators that can access lawful intercept data. This object … |
| 1.3.6.1.4.1.637.61.1.9.41 | ScalarasamSystemALSState | read-write | mandatory | Parameter used to enable / disable ALS (Automatic Laser Shutdown) system wide. ALS enable / disable will be applied only for NT & NTIO xFPs. 'disabled': System… |
| 1.3.6.1.4.1.637.61.1.9.43 | ScalarasamSystemCustomerId | read-write | mandatory | A textual string identifying the customer assigned in system level. Default value is 'available', which means system customer id is not configured. ALCATEL NOT… |
| 1.3.6.1.4.1.637.61.1.9.44 | ScalarasamSystemAutoSwitchAtmPtm | read-write | mandatory | This parameter allows the manager to enable or disable an Auto-Switching between ATMoADSLx and PTMoVDSLx at system wide. The supported values are, 1 (enable) -… |
| 1.3.6.1.4.1.637.61.1.9.45 | ScalarasamSystemAutoSwitchVdslStepUpDelay | read-write | mandatory | This parameter allows the manager to set delay time (in seconds) for auto-switch stepup to VDSL service. The auto-switch step-up request for VDSL service will … |
| 1.3.6.1.4.1.637.61.1.9.46 | ScalarasamSystemUplinkMode | read-write | mandatory | Parameter used to configure uplink mode. Notes: After changing uplink-mode, new value only takes effect after system reboot. ALCATEL NOTE: SUPPORT: YES INSRVMO… |
| 1.3.6.1.4.1.637.61.1.9.47 | ScalarasamSystemCurrentUplinkMode | read-only | mandatory | Parameter used to current uplink mode. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: NA PERSIST: YES DEFVALUE: NA UNITS: NA |
| 1.3.6.1.4.1.637.61.1.9.48 | ScalarasamSystemVoiceOswp | read-write | mandatory | The voice software when system startup. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: 0..2 PERSIST: YES DEFVALUE: sip(2) UNITS: - |
| 1.3.6.1.4.1.637.61.1.9.49 | ScalarasamSystemActivatedCDEExtended | read-only | mandatory | The Activated CDE is a bitmap listing the CDE features that are active. CDE features are activated during system startup only, and are based on the configured … |
| 1.3.6.1.4.1.637.61.1.9.50 | ScalarasamSuperuserAuthByTacacsPlus | read-write | mandatory | The TL1/CLI user ID SUPERUSER/isadmin is optionally authenticated by Tacacs+ based protocol on this object. When disabled, SUPERUSER/isadmin is always authenti… |
| 1.3.6.1.4.1.637.61.1.9.51 | ScalarasamExternalLedsStatus | read-write | mandatory | This MIB object is used to administratively turn off LEDs which are visible from the outside on some equipment practices like sealed remotes. By default, LEDs … |
| 1.3.6.1.4.1.637.61.1.9.52 | ScalarasamSystemMirrorVoice | read-write | mandatory | Enable/disable voice mirror of ingress/egress/both voice packets. Default value is Disabled ALCATEL NOTE: ACCESS: NA USAGE: OPT PERSIST: YES INSRVMOD: YES RANG… |
| 1.3.6.1.4.1.637.61.1.9.53 | NodetechSupport | |||
| 1.3.6.1.4.1.637.61.1.9.53.1 | ScalarasamTechSupportEnableDisable | read-write | mandatory | Enable/disable the techSupport functionality This attribute is only available on equipment practices that support this feature. When not supported noSuchName w… |
| 1.3.6.1.4.1.637.61.1.9.53.2 | ScalarasamTechSupportPurgeFiles | read-write | mandatory | This object is a button-like object and is used to clear all collected TechSupport files. Next to the Tech Support files related to board crashes, also all on-… |
| 1.3.6.1.4.1.637.61.1.9.53.3 | ScalarasamTechSupportOnDemandFreeSessionId | read-only | mandatory | This object provides a free session id that can be used for launching an on demand Tech Support file session via asamTechSupportActionTable ALCATEL NOTE: SUPPO… |
| 1.3.6.1.4.1.637.61.1.9.53.4 | TableasamTechSupportActionTable | not-accessible | mandatory | The TechSupport Action Table Use this table to launch On Demand Tech Support File generation |
| 1.3.6.1.4.1.637.61.1.9.53.4.1 | RowasamTechSupportActionEntry | not-accessible | mandatory | An entry in the asamTechSupportSessionTable. |
| 1.3.6.1.4.1.637.61.1.9.53.4.1.1 | ColumnasamTechSupportActionId | read-write | mandatory | The index of the Tech Support Action Table Session Entry with id 1 exists and is to be used for creating new tech support on demand requets. ALCATEL NOTE: SUPP… |
| 1.3.6.1.4.1.637.61.1.9.53.4.1.2 | ColumnasamTechSupportActionEvent | read-write | mandatory | Indicate which action to trigger. The Following scenarios are possible: - Generate an On Demand TS File A set with the below fields specified will generate an … |
| 1.3.6.1.4.1.637.61.1.9.53.4.1.3 | ColumnasamTechSupportActionSessionId | read-write | mandatory | Specify this value in case a dedicated session ID is to be used for this request. To find a good unique session-id, a read can be done to asamTechSupportOnDema… |
| 1.3.6.1.4.1.637.61.1.9.53.4.1.4 | ColumnasamTechSupportActionType | read-write | mandatory | The type corresponding to the stored or requested Tech Support File. - crashLog : type for auto generated crashlog TS files for boards - boardOnDemand : type f… |
| 1.3.6.1.4.1.637.61.1.9.53.4.1.5 | ColumnasamTechSupportActionObject | read-write | mandatory | Identifier that indicates for which object that the Tech Support File was generated or requested. For a boardOnDemand(2) request, the asamTechSupportSessionObj… |
| 1.3.6.1.4.1.637.61.1.9.53.4.1.6 | ColumnasamTechSupportActionServerIP | read-write | mandatory | The IP address of the server where the Tech Support File will be uploaded to. or 0.0.0.0 in case the file needs to be stored locally on the node. Currently onl… |
| 1.3.6.1.4.1.637.61.1.9.53.4.1.7 | ColumnasamTechSupportActionFile | read-write | mandatory | The filename that identifies the Tech Support File. 2 restrictions apply - For storing locally on the Node identified via asamTechSupportActionServerIP = 0 siz… |
| 1.3.6.1.4.1.637.61.1.9.53.5 | TableasamTechSupportSessionTable | not-accessible | mandatory | The TechSupport Session Table |
| 1.3.6.1.4.1.637.61.1.9.53.5.1 | RowasamTechSupportSessionEntry | not-accessible | mandatory | An entry in the asamTechSupportSessionTable. |
| 1.3.6.1.4.1.637.61.1.9.53.5.1.1 | ColumnasamTechSupportSessionId | not-accessible | mandatory | A unique value to identify a Tech Support Session ALCATEL NOTE: SUPPORT: YES INSRVMOD: NO RANGE: 0..65535 PERSIST: YES DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.9.53.5.1.2 | ColumnasamTechSupportSessionType | read-only | mandatory | The type corresponding to the stored or requested Tech Support File. - crashLog : type for auto generated crashlog TS files for boards - boardOnDemand : type f… |
| 1.3.6.1.4.1.637.61.1.9.53.5.1.3 | ColumnasamTechSupportSessionObject | read-only | mandatory | Identifier that indicates for which object that the Tech Support File was generated or requested. 2 cases exist: - asamTechSupportSessionObject = slotId for as… |
| 1.3.6.1.4.1.637.61.1.9.53.5.1.4 | ColumnasamTechSupportSessionServerIP | read-only | mandatory | The IP address of the server where the Tech Support File will be uploaded to. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NO RANGE: see above PERSIST: YES DEFVALUE: N… |
| 1.3.6.1.4.1.637.61.1.9.53.5.1.5 | ColumnasamTechSupportSessionFile | read-only | mandatory | The filename that identifies the Tech Support File. format - filename [max 13 characters] - fileserver:path/filename [ max 255 chars] ALCATEL NOTE: SUPPORT: YE… |
| 1.3.6.1.4.1.637.61.1.9.53.5.1.6 | ColumnasamTechSupportSessionStatus | read-only | mandatory | This object shows the status for a session-entry. The initial status is busy(1). When the generation completes successfully, then it goes to done(3). In case o… |
| 1.3.6.1.4.1.637.61.1.9.53.5.1.7 | ColumnasamTechSupportSessionError | read-only | mandatory | This object shows error information for a failed session-entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NO RANGE: see above PERSIST: YES DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.9.53.5.1.8 | ColumnasamTechSupportSessionSize | read-only | mandatory | This object shows the size of the collected TS file ALCATEL NOTE: SUPPORT: YES INSRVMOD: NO RANGE: see above PERSIST: YES DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.9.53.5.1.9 | ColumnasamTechSupportSessionTime | read-only | mandatory | Shows the Time in seconds from 1900 when the TS-entry was collected. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: see above PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.9.54 | ScalarasamSystemScalingMode | read-write | mandatory | An enum indicating configured scaling mode of BroadCom switch. Applicable for FX next generation NT(FANT-G). l2plus-Mode with L2 FDB table having higher scalin… |
| 1.3.6.1.4.1.637.61.1.9.55 | ScalarasamSystemOperationalScalingMode | read-only | mandatory | An enum indicating operational scaling mode of BroadCom switch. Applicable for FX next generation NT(FANT-G). l2plus-Mode with L2 FDB table having higher scali… |
| 1.3.6.1.4.1.637.61.1.9.56 | ScalarasamSystemZTPState | read-write | mandatory | Enable/disable the ZTP (Zero Touch Provision) functionality This attribute is only available on equipment practices that support this feature. If not supported… |
| 1.3.6.1.4.1.637.61.1.9.57 | ScalarasamSystemRFOverlayModule | read-write | mandatory | This MIB object is used to enable or disable the RF Overlay Module (SX-8F and SX-16F only). This MIB object is only supported on some equipment practices. If n… |
| 1.3.6.1.4.1.637.61.1.9.58 | NodeasamRelayIdSyntax | |||
| 1.3.6.1.4.1.637.61.1.9.58.1 | ScalarasamRelayAtmBasedDslSyntax | read-write | mandatory | This variable defines the syntax for generating a relay id for Atm based DSL lines terminated by DSL LT. It is a string to define a specified format at system … |
| 1.3.6.1.4.1.637.61.1.9.58.2 | ScalarasamRelayEthBasedDslSyntax | read-write | mandatory | This variable defines the syntax for generating a relay id for Ethernet based DSL lines terminated by DSL LT and for Ethernet lines terminated by Ethernet LT. … |
| 1.3.6.1.4.1.637.61.1.9.58.3 | ScalarasamRelayNtPortSyntax | read-write | mandatory | This variable defines the syntax for generating a relay id for NT ports. It is a string to define a specified format at system level. ALCATEL NOTE: SUPPORT: YE… |
| 1.3.6.1.4.1.637.61.1.9.59 | ScalarasamSystemArpPollingInterval | read-write | mandatory | The value of the object asamSystemArpPollingInterval specifies ARP polling interval. The range of the value is from 120s to 1096s.The default polling interval … |
| 1.3.6.1.4.1.637.61.1.9.60 | ScalarasamUplinkOutbandMgntIpAddress | read-write | mandatory | This MIB object is used to save uplink based out-band manangement IP. This MIB object is only supported on 7363 MX and 7367 8F/16F/48U SX (Spumante based IWF).… |
| 1.3.6.1.4.1.637.61.1.9.61 | ScalarasamUplinkOutbandMgntNetMask | read-write | mandatory | This MIB object is used to save uplink based out-band manangement IP's netmask. This MIB object is only supported on 7363 MX and 7367 8F/16F/48U SX (Spumante b… |
| 1.3.6.1.4.1.637.61.1.9.62 | TableasamDstRecurringConfTable | not-accessible | mandatory | The asamDstRecurringConfTable has an entry for each daylight saving time zone information with the specified week and weekday repeatedly. ALCATEL NOTE: SUPPORT… |
| 1.3.6.1.4.1.637.61.1.9.62.1 | RowasamDstRecurringConfEntry | not-accessible | mandatory | Each row entry contains information about a daylight saving time zone. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: NA PERSIST: YES DEFVALUE: NA UNITS: NA |
| 1.3.6.1.4.1.637.61.1.9.62.1.1 | ColumnasamDstRecurringZoneIndex | not-accessible | mandatory | This represents a daylight saving time zone. This index must be unique amongst the table entries. Because snmp index can't recognise negative integer,so we shi… |
| 1.3.6.1.4.1.637.61.1.9.62.1.2 | ColumnasamDstConfStartWeekDay | read-write | mandatory | The starting day of the week when the summer time will take effect. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0..6 PERSIST: YES DEFVALUE: sunday(0) UNITS:… |
| 1.3.6.1.4.1.637.61.1.9.62.1.3 | ColumnasamDstConfStartWeek | read-write | mandatory | The starting week of the month when the summer time will take effect. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0..4 PERSIST: YES DEFVALUE: first(0) UNITS… |
| 1.3.6.1.4.1.637.61.1.9.62.1.4 | ColumnasamDstConfStartMonth | read-write | mandatory | The starting month of the year when the summer time will take effect. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0..11 PERSIST: YES DEFVALUE: january(0) UN… |
| 1.3.6.1.4.1.637.61.1.9.62.1.5 | ColumnasamDstConfStartHour | read-write | mandatory | The hour at which the summer time will take effect. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0..23 PERSIST: YES DEFVALUE: 0 UNITS: hours |
| 1.3.6.1.4.1.637.61.1.9.62.1.6 | ColumnasamDstConfStartMinute | read-write | mandatory | The number of minutes after the hours defined by asamDstConfStartHour when the summer time will take effect. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0..… |
| 1.3.6.1.4.1.637.61.1.9.62.1.7 | ColumnasamDstConfEndWeekDay | read-write | mandatory | The day of the week when the summer time setting will end. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0..6 PERSIST: YES DEFVALUE: sunday(0) UNITS: NA |
| 1.3.6.1.4.1.637.61.1.9.62.1.8 | ColumnasamDstConfEndWeek | read-write | mandatory | The week of the month when the summer time setting will end. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0..4 PERSIST: YES DEFVALUE: first(0) UNITS: NA |
| 1.3.6.1.4.1.637.61.1.9.62.1.9 | ColumnasamDstConfEndMonth | read-write | mandatory | The month of the year when the summer time setting will end. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0..11 PERSIST: YES DEFVALUE: january(0) UNITS: NA |
| 1.3.6.1.4.1.637.61.1.9.62.1.10 | ColumnasamDstConfEndHour | read-write | mandatory | The hour at which the summer time will stop taking effect. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0..23 PERSIST: YES DEFVALUE: 0 UNITS: hours |
| 1.3.6.1.4.1.637.61.1.9.62.1.11 | ColumnasamDstConfEndMinute | read-write | mandatory | The number of minutes after the hours defined by asamDstConfEndHour when the summer time will stop taking effect. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE… |
| 1.3.6.1.4.1.637.61.1.9.62.1.12 | ColumnasamDstRecurringAdjustment | read-write | mandatory | The number of minutes that will be added to the time when daylight saving time takes effect. The same number of minutes will be subtracted from the time when t… |
| 1.3.6.1.4.1.637.61.1.9.62.1.13 | ColumnasamDstRecurringIsAffectedSrc | read-only | mandatory | The value of asamDstRecurringIsAffectedSrc indicates whether this configuration entry match the OLT timezone. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1.… |
| 1.3.6.1.4.1.637.61.1.9.62.1.14 | ColumnasamDstRecurringRowStatus | read-write | mandatory | The row status used to create and delete rows in this table. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: NA PERSIST: YES DEFVALUE: NA UNITS: NA |
| 1.3.6.1.4.1.637.61.1.9.63 | TableasamDstDateConfTable | not-accessible | mandatory | The asamDstDateConfTable has an entry for each daylight saving time zone information with the specified with the corresponding specified days some year. ALCATE… |
| 1.3.6.1.4.1.637.61.1.9.63.1 | RowasamDstDateConfEntry | not-accessible | mandatory | Each row entry contains information about a daylight saving time zone. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: NA PERSIST: YES DEFVALUE: NA UNITS: NA |
| 1.3.6.1.4.1.637.61.1.9.63.1.1 | ColumnasamDstDateZoneIndex | not-accessible | mandatory | This represents a daylight saving time zone. This index must be unique amongst the table entries. Because snmp index can't recognise negative integer,so we shi… |
| 1.3.6.1.4.1.637.61.1.9.63.1.2 | ColumnasamDstConfStartDate | read-write | mandatory | The time when the daylight saving time will take effect means the number of standard seconds since 0h on 1 January 1900. ALCATEL NOTE: SUPPORT: YES INSRVMOD: N… |
| 1.3.6.1.4.1.637.61.1.9.63.1.3 | ColumnasamDstConfEndDate | read-write | mandatory | The time when daylight saving time will end means the number of standard seconds since0h on 1 January 1900. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..4… |
| 1.3.6.1.4.1.637.61.1.9.63.1.4 | ColumnasamDstDateAdjustment | read-write | mandatory | The number of minutes that will be added to the time when daylight saving time takes effect. The same number of minutes will be subtracted from the time when t… |
| 1.3.6.1.4.1.637.61.1.9.63.1.5 | ColumnasamDstDateIsAffectedSrc | read-only | mandatory | The value of asamDstDateIsAffectedSrc indicates whether this configuration entry match the OLT timezone. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..2 PE… |
| 1.3.6.1.4.1.637.61.1.9.63.1.6 | ColumnasamDstDateRowStatus | read-write | mandatory | The row status used to create and delete rows in this table. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: NA PERSIST: YES DEFVALUE: NA UNITS: NA |
| 1.3.6.1.4.1.637.61.1.9.64 | ScalarasamDstEnableDisable | read-write | mandatory | This node indicates the status of daylight saving time. If the value of this node is enable, means that daylight saving time is enabled. If the value is disabl… |
| 1.3.6.1.4.1.637.61.1.9.65 | ScalarasamDstIsAffected | read-only | mandatory | This node indicates whether daylight saving time comes into effect or not. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..2 PERSIST: YES DEFVALUE: notAffect… |
| 1.3.6.1.4.1.637.61.1.9.66 | ScalarasamSystemBSNAPState | read-write | mandatory | BSNAP is a trace mechanism to keep binary snapshot trace of an sw error deteted, and this MIB object is used to enable of disable BSNAP ALCATEL NOTE: SUPPORT: … |
| 1.3.6.1.4.1.637.61.1.9.67 | ScalarasamSystemBSNAPServerIP | read-write | mandatory | BSNAP is a trace mechanism to keep binary snapshot trace of an sw error deteted, and this MIB object is used to set the BSNAP server IP ALCATEL NOTE: SUPPORT: … |
| 1.3.6.1.4.1.637.61.1.9.68 | ScalarasamSystemBSNAPServerPort | read-write | mandatory | BSNAP is a trace mechanism to keep binary snapshot trace of an sw error deteted, and this MIB object is used to set the BSNAP server UDP port ALCATEL NOTE: SUP… |