ASAM-EQUIP-MIB
254 objects
No module-level DESCRIPTION found.
Imported Objects
| ASAM-ALARM-MIB | AsamAlarmSeverityType |
| ASAM-TC-MIB | AsamNextProfileIndex AsamProfileIndex AsamProfileName AsamProfilePointer AsamProfileRefCount NetworkTimeInSeconds |
| ITF-MIB | InterfaceIndex |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter IpAddress TimeTicks |
| SNMPv2-TC | DisplayString RowStatus TruthValue |
| SYSTEM-MIB | asam |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.637.61.1.23 | NodeasamEquipmentMIB | |||
| 1.3.6.1.4.1.637.61.1.23.1 | NodeeqptAsam | |||
| 1.3.6.1.4.1.637.61.1.23.1.1 | ScalareqptAsamId | read-only | mandatory | Unique identifier of the system. In practice, this attribute contains the serial number of the most recently equipped SMAS board within the main shelf. Notice … |
| 1.3.6.1.4.1.637.61.1.23.1.2 | ScalareqptAsamRestart | read-write | mandatory | This attribute is used to restart the system. The persistent data is preserved. Contains previous restart reason, if not available it contains value 255. ALCAT… |
| 1.3.6.1.4.1.637.61.1.23.1.3 | ScalareqptMaxRacksPerAsam | read-only | mandatory | This object is initialized by the system and specifies the maximum number of racks supported by the system. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..7… |
| 1.3.6.1.4.1.637.61.1.23.1.4 | ScalareqptMaxShelvesPerRack | read-only | mandatory | This object is initialized by the system and specifies the maximum number of shelves which can be equipped within one rack. ALCATEL NOTE: SUPPORT: YES INSRVMOD… |
| 1.3.6.1.4.1.637.61.1.23.1.5 | ScalareqptMaxSlotsPerShelf | read-only | mandatory | This object is initialized by the system and specifies the maximum number of regular slots supported by one shelf. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANG… |
| 1.3.6.1.4.1.637.61.1.23.1.6 | ScalareqptHwNumberOfChanges | read-only | mandatory | Wrap around counter which indicates the number of configuration or status changes in the Equipment MIB objects. This counter is incremented each time any of th… |
| 1.3.6.1.4.1.637.61.1.23.1.7 | ScalareqptProtNumberOfChanges | read-only | mandatory | Wrap around counter which indicates the overall number of status changes in the equipment protection MIB objects. This counter is incremented each time any of … |
| 1.3.6.1.4.1.637.61.1.23.1.8 | ScalareqptRestartNumberOfChanges | read-only | mandatory | Wrap around counter which indicates the overall number of status changes in the eqptBoardRestartNumberOfChanges objects in eqptBoardTable. This counter is incr… |
| 1.3.6.1.4.1.637.61.1.23.1.9 | ScalareqptFanMode | read-write | mandatory | Parameter indicates the actually applied FAN tray mode: 'default': the fan packs run in average mode, predefined thermal margins are used for defining/adapting… |
| 1.3.6.1.4.1.637.61.1.23.2 | TableeqptHolderTable | not-accessible | mandatory | Equipment holder table, representing the system, the racks and the shelves. This table contains one row for the system, one row per rack, and one row per shelf… |
| 1.3.6.1.4.1.637.61.1.23.2.1 | RoweqptHolderEntry | not-accessible | mandatory | An entry of the equipment holder table. ALCATEL NOTE: SUPPORT: YES |
| 1.3.6.1.4.1.637.61.1.23.2.1.1 | ColumneqptHolderId | not-accessible | mandatory | Index in equipment holder Table. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.23.2.1.2 | ColumneqptHolderClass | read-write | mandatory | Classification of shelves. This object has no meaning for the system and the rack equipment holders. Note: for ISAM, only the values mainEthernet (4) and extEt… |
| 1.3.6.1.4.1.637.61.1.23.2.1.3 | ColumneqptHolderPlannedType | read-write | mandatory | A string representing the planned type of equipment holder. If the equipment holder is planned, the string consists of a mnemonic, identifying the holder type.… |
| 1.3.6.1.4.1.637.61.1.23.2.1.4 | ColumneqptHolderActualType | read-only | mandatory | A string representing the actual equipment holder type. Following values are possible: <HOLDER_MNEMONIC> Indicates the detected equipment holder-type. Uses sam… |
| 1.3.6.1.4.1.637.61.1.23.2.1.5 | ColumneqptHolderAdminStatus | read-write | mandatory | Used by the administrator to lock or unlock an equipment holder. This attribute is only supported for shelves. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: … |
| 1.3.6.1.4.1.637.61.1.23.2.1.6 | ColumneqptHolderOperStatus | read-only | mandatory | This attribute identifies whether or not the equipment holder is capable of performing its normal functions. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..… |
| 1.3.6.1.4.1.637.61.1.23.2.1.7 | ColumneqptHolderOperError | read-only | mandatory | This attribute describes for what reason the equipment holder is not operational. These values correspond with the alarms that are generated in case of a failu… |
| 1.3.6.1.4.1.637.61.1.23.2.1.8 | ColumneqptHolderAvailStatus | read-only | mandatory | This attribute indicates whether the equipment holder is available or not. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1, 3, 5, 6 PERSIST: NO DEFVALUE: NA U… |
| 1.3.6.1.4.1.637.61.1.23.2.1.9 | ColumneqptHolderDescription | read-write | mandatory | Text-field, which can for instance be used to describe the location of the equipment holder. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: See above PERSIST:… |
| 1.3.6.1.4.1.637.61.1.23.2.1.10 | ColumneqptHolderContainerId | read-only | mandatory | This attribute describes in which equipment holder the equipment holder is contained. This object is only meaningful for racks and shelves, since the system it… |
| 1.3.6.1.4.1.637.61.1.23.2.1.11 | ColumneqptHolderContainerOffset | read-only | mandatory | This attribute describes the position of the equipment holder in the containing equipment holder. This object is only meaningful for racks and shelves, since t… |
| 1.3.6.1.4.1.637.61.1.23.2.1.12 | ColumneqptHolderMode | read-write | mandatory | This attribute identifies the holder mode and is used by both the NEP shelf and the ARAM-E shelf: ntbntio-supported: this mode works in the same manner as iSAM… |
| 1.3.6.1.4.1.637.61.1.23.2.1.13 | ColumneqptHolderSerialNumber | read-only | mandatory | This attribute represents the serial number of the shelf. NOT available If FIM < 25 in RI, this attribute could not be retrieved. ALCATEL NOTE: SUPPORT: YES IN… |
| 1.3.6.1.4.1.637.61.1.23.2.1.14 | ColumneqptHolderVariant | read-only | mandatory | This attribute represents the ALU code of the shelf. NOT available If FIM < 25 in RI, this attribute could not be retrieved. ALCATEL NOTE: SUPPORT: YES INSRVMO… |
| 1.3.6.1.4.1.637.61.1.23.2.1.15 | ColumneqptHolderICScode | read-only | mandatory | This attribute represents the Item Change Status iteration code of the shelf. NOT available If FIM < 25 in RI, this attribute could not be retrieved. ALCATEL N… |
| 1.3.6.1.4.1.637.61.1.23.3 | TableeqptBoardTable | not-accessible | mandatory | A table representing the slots of all planned shelves. Each slot can hold a board of one of the following types: NT, EXT, LSM, ACU, CTRL, applique. This table … |
| 1.3.6.1.4.1.637.61.1.23.3.1 | RoweqptBoardEntry | not-accessible | mandatory | An entry in the eqptBoardTable. ALCATEL NOTE: SUPPORT: YES |
| 1.3.6.1.4.1.637.61.1.23.3.1.1 | ColumneqptSlotId | not-accessible | mandatory | A unique value to identify a slot position. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.23.3.1.2 | ColumneqptSlotPlannedType | read-write | mandatory | A string representing the board (NT, EXT, LSM, ACU, CTRL, Applique) that is planned in the slot. If the board is planned, the string consists of a mnemonic tha… |
| 1.3.6.1.4.1.637.61.1.23.3.1.3 | ColumneqptSlotActualType | read-only | mandatory | A string representing the board (NT, EXT, LSM, ACU, CTRL, Applique) that is actually present in the slot. Following values are possible: <BOARD_MNEMONIC> Indic… |
| 1.3.6.1.4.1.637.61.1.23.3.1.4 | ColumneqptSlotPowerStatus | read-write | mandatory | This attribute is used by the operator to power-up or power-down an LSM slot. This attribute is not supported for other type of slots. ALCATEL NOTE: SUPPORT: Y… |
| 1.3.6.1.4.1.637.61.1.23.3.1.5 | ColumneqptBoardAdminStatus | read-write | mandatory | This attribute is used by the operator to lock or unlock the board. This attribute is only supported for the following type of boards: NT (but notice that the … |
| 1.3.6.1.4.1.637.61.1.23.3.1.6 | ColumneqptBoardOperStatus | read-only | mandatory | This attribute informs the operator whether the plug-in unit is able to perform its normal operation. This attribute is supported for all type of boards: NT, E… |
| 1.3.6.1.4.1.637.61.1.23.3.1.7 | ColumneqptBoardOperError | read-only | mandatory | This attribute describes for what reason the board is not operational. These values correspond with the alarms which are generated in case of a failure. This a… |
| 1.3.6.1.4.1.637.61.1.23.3.1.8 | ColumneqptBoardAvailStatus | read-only | mandatory | This attribute provides further information regarding the state of the board. It is set to available after a successfull selftest of the board (if applicable).… |
| 1.3.6.1.4.1.637.61.1.23.3.1.9 | ColumneqptBoardRestart | read-write | mandatory | Writing a valid value to this object will restart the board in the specified mode. This attribute is only supported for the following type of boards: NT, EXT, … |
| 1.3.6.1.4.1.637.61.1.23.3.1.10 | ColumneqptBoardSwOverruleStatus | read-write | mandatory | Used to overrule the default software version for this board. This attribute is only supported for managed LSMs. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE… |
| 1.3.6.1.4.1.637.61.1.23.3.1.11 | ColumneqptBoardContainerId | read-only | mandatory | This attribute describes in which equipment holder the slot is contained. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNI… |
| 1.3.6.1.4.1.637.61.1.23.3.1.12 | ColumneqptBoardContainerOffset | read-only | mandatory | This attribute describes the position of the slot in the containing equipment holder. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFV… |
| 1.3.6.1.4.1.637.61.1.23.3.1.13 | ColumneqptBoardInventoryAlcatelCompanyId | read-only | mandatory | This attribute represents the company of the board. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.23.3.1.14 | ColumneqptBoardInventoryTypeName | read-only | mandatory | This attribute represents the name of the board. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.23.3.1.15 | ColumneqptBoardInventoryPBACode | read-only | mandatory | This attribute represents the Alcatel Printed Board Assembly code of of the board. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALU… |
| 1.3.6.1.4.1.637.61.1.23.3.1.16 | ColumneqptBoardInventoryFPBACode | read-only | mandatory | This attribute represents the Alcatel Printed Board Assembly code of the board, which also identifies the boot software. ALCATEL NOTE: SUPPORT: YES INSRVMOD: N… |
| 1.3.6.1.4.1.637.61.1.23.3.1.17 | ColumneqptBoardInventoryICScode | read-only | mandatory | This attribute represents the Item Change Status iteration code of the board. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA… |
| 1.3.6.1.4.1.637.61.1.23.3.1.18 | ColumneqptBoardInventoryCLEICode | read-only | mandatory | This attribute represents the (USA) Common Language Equipment Identification code of the board. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIS… |
| 1.3.6.1.4.1.637.61.1.23.3.1.19 | ColumneqptBoardInventorySerialNumber | read-only | mandatory | This attribute represents the serial number of the board. Breakdown of a sample serial number is : sample NANT-D serial number is AA1003ZA028 AA 10 03 ZA028 | … |
| 1.3.6.1.4.1.637.61.1.23.3.1.20 | ColumneqptBoardInventoryLastFailedTest | read-only | mandatory | Identifies the last failing test by means of 4 numbers, from MSB to LSB: - Table number (1 byte) - Segment number (1 byte) - Case number (1 byte) - Check numbe… |
| 1.3.6.1.4.1.637.61.1.23.3.1.22 | ColumneqptSlotPlannedCapabilityProfile | read-write | mandatory | A pointer to the capability profile that will be used for this slot. Capability profiles are only applicable for LT cards that are not EXT_MANAGED and not UNMA… |
| 1.3.6.1.4.1.637.61.1.23.3.1.23 | ColumneqptBoardCustAlarmProfile | read-write | mandatory | A pointer to the customizable alarms profile which will be associated to NT for all shelves except FD-REM where the customizable alarms profile will be associa… |
| 1.3.6.1.4.1.637.61.1.23.3.1.24 | ColumneqptBoardLastRestartCause | read-only | mandatory | This attribute gives the last restart cause for board. Currently only LSM board can support. Considering future safe, only use default value for other board en… |
| 1.3.6.1.4.1.637.61.1.23.3.1.25 | ColumneqptBoardLastRestartTime | read-only | mandatory | This attribute gives the last restart time. Currently only LSM board can support. Considering future safe, only use default value for other board entry. ALCATE… |
| 1.3.6.1.4.1.637.61.1.23.3.1.26 | ColumneqptBoardRestartNumberOfChanges | read-only | mandatory | Wrap around counter which indicates the number of restart times. This counter is incremented each time eqptBoardLastRestartTime changes. Considering future saf… |
| 1.3.6.1.4.1.637.61.1.23.3.1.27 | ColumneqptBoardRelatedMgntEntityIPAddress | read-only | mandatory | Network address. It is a public OAM IP address related to xVPS. For single OAM IP is introduced, multi-xVPS boards existing on a same shelf may use one single … |
| 1.3.6.1.4.1.637.61.1.23.3.1.28 | ColumneqptBoardRelatedMgntEntityPairedNumber | read-only | mandatory | For single OAM IP is introduced, one public OAM IP can not identify an xVPS, so community string is introduced. Each active xVPS will have different community … |
| 1.3.6.1.4.1.637.61.1.23.3.1.29 | ColumneqptBoardDualHostIPAddress | read-write | mandatory | Network address. Only applicable for FD REM connected to dual host. It is the public OAM IP address of the host connecting the Lsm in this externally managed s… |
| 1.3.6.1.4.1.637.61.1.23.3.1.30 | ColumneqptBoardDualHostLsmLocation | read-write | mandatory | Only applicable for FD REM connected to dual host. It is the Rack/Shelf identifying the location of this externally managed slot, within the scope of the host … |
| 1.3.6.1.4.1.637.61.1.23.3.1.32 | ColumneqptBoardIfSlotId | read-only | mandatory | This object gives the slot's linear number, which could be used by an external manager to help in mapping a given IfIndex to a physical slot location. It is a … |
| 1.3.6.1.4.1.637.61.1.23.3.1.33 | ColumneqptBoardRestartCountPerLt | read-only | mandatory | Wrap around counter which indicates the number of restart times per LT. This counter is incremented each time eqptBoardLastRestartTime changes.This counter wil… |
| 1.3.6.1.4.1.637.61.1.23.3.1.34 | ColumneqptBoardClearRestartCountPerLt | read-write | mandatory | This object is a button-like object to reset the eqptBoardRestartCountPerLt counter. When it is set to true(1) value then the corresponding eqptBoardRestartCou… |
| 1.3.6.1.4.1.637.61.1.23.4 | TableeqptShelfSummaryTable | not-accessible | mandatory | Shelf summary table, summarizing slot or board related status changes within each shelf. This table has one row per planned shelf. ALCATEL NOTE: SUPPORT: YES T… |
| 1.3.6.1.4.1.637.61.1.23.4.1 | RoweqptShelfSummaryEntry | not-accessible | mandatory | An entry of the shelf summary table. ALCATEL NOTE: SUPPORT: YES |
| 1.3.6.1.4.1.637.61.1.23.4.1.1 | ColumneqptShelfHwNumberOfChanges | read-only | mandatory | Wrap around counter which indicates the number of configuration or status changes for slots/boards within this shelf. This counter is incremented each time any… |
| 1.3.6.1.4.1.637.61.1.23.4.1.2 | ColumneqptShelfSlotSummaryOccupation | read-only | mandatory | Bitmap of the occupation of slots (0 = empty, 1 = full) Applicable for NT, EXT, LSM, ACU, CTRL, applique. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See ab… |
| 1.3.6.1.4.1.637.61.1.23.4.1.3 | ColumneqptShelfBoardSummaryAdmin | read-only | mandatory | Bitmap of the administrative state of the boards (0 = locked, 1 = unlocked). Applicable for NT, EXT, LSM. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See ab… |
| 1.3.6.1.4.1.637.61.1.23.4.1.4 | ColumneqptShelfBoardSummaryAvail | read-only | mandatory | Bitmap of the availability state of the boards (0 = not available, 1 = available). Applicable for NT, EXT, LSM, ACU, CTRL, applique. ALCATEL NOTE: SUPPORT: YES… |
| 1.3.6.1.4.1.637.61.1.23.4.1.5 | ColumneqptShelfBoardSummaryOper | read-only | mandatory | Bitmap of the operational state of the boards (0 = locked, 1 = unlocked). Applicable for NT, EXT, LSM, ACU, CTRL, applique. ALCATEL NOTE: SUPPORT: YES INSRVMOD… |
| 1.3.6.1.4.1.637.61.1.23.4.1.6 | ColumneqptShelfBoardSummaryTypeMismatch | read-only | mandatory | Bitmap of the mismatch between the actual board-type and the planned board-type (0 = mismatch, 1 = no mismatch). Applicable for NT, EXT, LSM, ACU, CTRL, appliq… |
| 1.3.6.1.4.1.637.61.1.23.4.1.7 | ColumneqptShelfBoardSummaryAlarm | read-only | mandatory | Bitmap of the boards which generated an alarm (0 = alarm, 1 = no alarm). Applicable for NT, EXT, LSM, ACU, CTRL, applique. ALCATEL NOTE: SUPPORT: YES INSRVMOD:… |
| 1.3.6.1.4.1.637.61.1.23.5 | NodeeqptProt | |||
| 1.3.6.1.4.1.637.61.1.23.5.1 | ScalareqptProtNextProtGroupId | read-only | mandatory | This object contains an appropriate value to be used for eqptProtGroupId when creating entries in the eqptProtGroupTable. The value 0 indicates that no unassig… |
| 1.3.6.1.4.1.637.61.1.23.5.2 | TableeqptProtGroupTable | not-accessible | mandatory | A table representing groups of protected or protecting elements. Only one row for NT protection group which will always be created and cannot be deleted. From … |
| 1.3.6.1.4.1.637.61.1.23.5.2.1 | RoweqptProtGroupEntry | not-accessible | mandatory | An entry of the eqptProtGroupTable. ALCATEL NOTE: SUPPORT: YES |
| 1.3.6.1.4.1.637.61.1.23.5.2.1.1 | ColumneqptProtGroupId | not-accessible | mandatory | A unique value to identify a protection group. The value 1 is reserved for the NT protection group, which is always present and cannot be deleted. ALCATEL NOTE… |
| 1.3.6.1.4.1.637.61.1.23.5.2.1.2 | ColumneqptProtGroupType | read-write | mandatory | This attributes distinguishes between 1+1 and 1:N protection groups. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..2 PERSIST: YES DEFVALUE: one-plus-one(1)… |
| 1.3.6.1.4.1.637.61.1.23.5.2.1.3 | ColumneqptProtGroupNumberOfChanges | read-only | mandatory | Wrap around counter which indicates the number of status changes in this protection group as well as the status changes for the protecting elements within this… |
| 1.3.6.1.4.1.637.61.1.23.5.2.1.4 | ColumneqptProtGroupSwitchoverCount | read-only | mandatory | Wrap around counter for the number of switchovers being performed. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: 0 UNITS: - |
| 1.3.6.1.4.1.637.61.1.23.5.2.1.5 | ColumneqptProtGroupLastSwitchoverReason | read-only | mandatory | This object contains the reason of the last switch over. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..17 PERSIST: YES DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.23.5.2.1.6 | ColumneqptProtGroupEpsQuenchfactor | read-write | mandatory | This object contains a timervalue in 1/100 sec. The EpsQuench timer is used to prevent continuous switch-overs in case of unstable EPS. Value equal to zero mea… |
| 1.3.6.1.4.1.637.61.1.23.5.2.1.7 | ColumneqptProtGroupAlarmBitmap | read-only | mandatory | Status bitmap: bit 0 set means No defect at all bit 1 : if bit set, Standby degradation alarm is set (excludes bit 0 setting) bit 2 .. 31 : reserved for future… |
| 1.3.6.1.4.1.637.61.1.23.5.2.1.8 | ColumneqptProtGroupAdminStatus | read-write | mandatory | Used by the administrator to disable or enable protection within that protection group. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: 1..2 PERSIST: YES DEFVA… |
| 1.3.6.1.4.1.637.61.1.23.5.2.1.9 | ColumneqptProtGroupAdminProtElement | read-write | mandatory | Only supported for 1:N protection groups. In case of a forced switchover to the spare element, this attribute is used to specify the element to be protected. T… |
| 1.3.6.1.4.1.637.61.1.23.5.2.1.10 | ColumneqptProtGroupOperProtElement | read-only | mandatory | Only supported for 1:N protection groups. Indicates which element is currently protected by the spare element. The value 0 means that currently the spare eleme… |
| 1.3.6.1.4.1.637.61.1.23.5.2.1.11 | ColumneqptProtGroupRowStatus | read-write | mandatory | Entries in the eqptProtGroupTable can only be created at once, by specifying eqptProtGroupRowStatus=createAndGo(4). For NT protection group, if all values are … |
| 1.3.6.1.4.1.637.61.1.23.5.3 | TableeqptProtElementTable | not-accessible | mandatory | A table representing the protected or protecting elements. An element can be either a board or an extension chain. Both are identified by the corresponding slo… |
| 1.3.6.1.4.1.637.61.1.23.5.3.1 | RoweqptProtElementEntry | not-accessible | mandatory | An entry of the eqptProtElementTable. ALCATEL NOTE: SUPPORT: YES |
| 1.3.6.1.4.1.637.61.1.23.5.3.1.1 | ColumneqptProtElementGroupId | read-write | mandatory | This attributes identifies the protection group to which this element belongs. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NO for ISAM R3.3 RANGE: See above PERSIST: … |
| 1.3.6.1.4.1.637.61.1.23.5.3.1.2 | ColumneqptProtElementType | read-write | mandatory | This attribute is used to distinguish between normal elements of a protection group and the spare element of a 1:N protection group. ALCATEL NOTE: SUPPORT: YES… |
| 1.3.6.1.4.1.637.61.1.23.5.3.1.3 | ColumneqptProtElementStandbyStatus | read-only | mandatory | This attribute reflects the standby status of the protection group element. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..4 PERSIST: NO DEFVALUE: NA UNITS:… |
| 1.3.6.1.4.1.637.61.1.23.5.3.1.4 | ColumneqptProtElementRedcyCtrlStatus | read-write | mandatory | This attribute is used to force a switchover between elements of a protection group or to keep one of the elements active. ALCATEL NOTE: SUPPORT: YES INSRVMOD:… |
| 1.3.6.1.4.1.637.61.1.23.5.3.1.5 | ColumneqptProtElementRowStatus | read-write | mandatory | Entries in the eqptProtElementTable can only be created at once, by specifying eqptProtEelementRowStatus=createAndGo(4). If all values are valid then the entry… |
| 1.3.6.1.4.1.637.61.1.23.5.3.1.6 | ColumneqptProtElementStandbyStatuschangeReason | read-only | mandatory | This attribute reflects the reason why the standby status of the protection group element has changed. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0..24 PER… |
| 1.3.6.1.4.1.637.61.1.23.6 | NodeeqptProfile | |||
| 1.3.6.1.4.1.637.61.1.23.6.1 | TableeqptProfileTable | not-accessible | mandatory | A table holding the mapping between the profileId and the corresponding profile name. This table has a row for every profile in the system. ALCATEL NOTE: SUPPO… |
| 1.3.6.1.4.1.637.61.1.23.6.1.1 | RoweqptProfileEntry | not-accessible | mandatory | An entry in the eqptProfileTable. ALCATEL NOTE: SUPPORT: YES |
| 1.3.6.1.4.1.637.61.1.23.6.1.1.1 | ColumneqptProfileId | read-only | mandatory | A value identifying a profile. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.23.6.1.1.2 | ColumneqptProfileName | read-only | mandatory | The corresponding name for a given profile id. The name corresponding to the ProfileId must also be unique. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See … |
| 1.3.6.1.4.1.637.61.1.23.6.1.1.3 | ColumneqptProfileDescription | read-only | mandatory | A short description for the given profile, explaining the key attributes. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNI… |
| 1.3.6.1.4.1.637.61.1.23.6.2 | TableeqptProfileApplicabilityTable | not-accessible | mandatory | This table lists for every defined profile in the system for which boards it is applicable. One profile can be applicable for multiple board types. Multiple pr… |
| 1.3.6.1.4.1.637.61.1.23.6.2.1 | RoweqptProfileApplicabilityEntry | not-accessible | mandatory | An entry in the eqptProfileApplicabilityTable. ALCATEL NOTE: SUPPORT: YES |
| 1.3.6.1.4.1.637.61.1.23.6.2.1.1 | ColumneqptBoardType | read-only | mandatory | A string representing the board for which the profile is applicable. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.23.6.2.1.2 | ColumneqptDefaultProfile | read-only | mandatory | A flag indicating if this is the default profile for a specific board type. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA U… |
| 1.3.6.1.4.1.637.61.1.23.7 | TableeqptTestChainTable | not-accessible | mandatory | A table contains the test chain configuration indicating which shelf is connected to the TAP_UP or whether an external test head is connected to the TAP_UP. Th… |
| 1.3.6.1.4.1.637.61.1.23.7.1 | RoweqptTestChainEntry | not-accessible | mandatory | An entry in the eqptTestChainTable. |
| 1.3.6.1.4.1.637.61.1.23.7.1.1 | ColumneqptTestChainShelfToTapUp | read-write | mandatory | A unique value to identify a shelf position which is connected to the TAP_UP. The value '0' (default value) indicates that it is not connected. This parameter … |
| 1.3.6.1.4.1.637.61.1.23.7.1.2 | ColumneqptTestChainExtTestHeadToTapUp | read-write | mandatory | This parameter is used to indicate whether an external test head is connected to the TAP_UP. no (1): no external test head is connected to the TAP_UP. yes (2):… |
| 1.3.6.1.4.1.637.61.1.23.8 | NodeeqptCustAlarmProfile | |||
| 1.3.6.1.4.1.637.61.1.23.8.1 | ScalareqptCustAlarmProfileIndexNext | read-only | mandatory | This object contains an appropriate value to be used for eqptCustAlarmProfileIndex when creating entries in the associated profile table. The value 0 indicates… |
| 1.3.6.1.4.1.637.61.1.23.8.2 | TableeqptCustAlarmProfileTable | not-accessible | mandatory | A table representing the configurable attributes of the customizable alarms : a description, and the corresponding Alarm Outputs to be activated when this alar… |
| 1.3.6.1.4.1.637.61.1.23.8.2.1 | RoweqptCustAlarmProfileEntry | not-accessible | mandatory | An entry in the eqptCustAlarmProfileTable. ALCATEL NOTE: SUPPORT: YES |
| 1.3.6.1.4.1.637.61.1.23.8.2.1.1 | ColumneqptCustAlarmProfileIndex | read-only | mandatory | The Customizale Alarms Profile Index. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..20 PERSIST: YES DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.23.8.2.1.2 | ColumneqptCustAlarmProfileName | read-write | mandatory | A textual name uniquely identifying this profile. Maximum length is 32, allowed characters A-Z, a-z, 0-9, '-'. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: S… |
| 1.3.6.1.4.1.637.61.1.23.8.2.1.3 | ColumneqptCustAlarmProfileUsedStatus | read-only | mandatory | Indicates the number of entities using this profile. If the reference count is greater than 0, then this profile is 'in use', and may NOT be deleted. If the va… |
| 1.3.6.1.4.1.637.61.1.23.8.2.1.4 | ColumneqptCustAlarmProfileRowStatus | read-write | mandatory | Entries in the eqptCustAlarmProfileTable can only be created at once, by specifying eqptCustAlarmProfileRowStatus=createAndGo(4). If all values are valid then … |
| 1.3.6.1.4.1.637.61.1.23.8.2.1.5 | ColumneqptCustAlarmProfileMnemonic1 | read-write | mandatory | The mnemonic of the customizable alarm, for given Profile Index, for external alarm number 1. Maximum length is 16, allowed characters A-Z. ALCATEL NOTE: SUPPO… |
| 1.3.6.1.4.1.637.61.1.23.8.2.1.6 | ColumneqptCustAlarmProfileDescription1 | read-write | mandatory | The description of the customizable alarm, for given Profile Index, for external alarm number 1. Maximum length is 40. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA … |
| 1.3.6.1.4.1.637.61.1.23.8.2.1.7 | ColumneqptCustAlarmProfileVisibleOutput1 | read-write | mandatory | Shows whether or not to trigger the visible alarm output, for given Profile Index, for external alarm number 1. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: … |
| 1.3.6.1.4.1.637.61.1.23.8.2.1.8 | ColumneqptCustAlarmProfileAudibleOutput1 | read-write | mandatory | Shows whether or not to trigger the audible alarm output, for given Profile Index, for external alarm number 1. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: … |
| 1.3.6.1.4.1.637.61.1.23.8.2.1.9 | ColumneqptCustAlarmProfilePolarity1 | read-write | mandatory | Shows whether the alarm polarity is normal or inversed, for given Profile Index, for external alarm number 1. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: Se… |
| 1.3.6.1.4.1.637.61.1.23.8.2.1.10 | ColumneqptCustAlarmProfileSeverity1 | read-write | mandatory | Shows the severity of the alarm, for given Profile Index, for external alarm number 1. ALCATEL NOTE: SUPPORT: NO INSRVMOD: NA RANGE: 1-5 PERSIST: YES DEFVALUE:… |
| 1.3.6.1.4.1.637.61.1.23.8.2.1.11 | ColumneqptCustAlarmProfileMnemonic2 | read-write | mandatory | The mnemonic of the customizable alarm, for given Profile Index, for external alarm number 2. Maximum length is 16, allowed characters A-Z. ALCATEL NOTE: SUPPO… |
| 1.3.6.1.4.1.637.61.1.23.8.2.1.12 | ColumneqptCustAlarmProfileDescription2 | read-write | mandatory | The description of the customizable alarm, for given Profile Index, for external alarm number 2. Maximum length is 40. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA … |
| 1.3.6.1.4.1.637.61.1.23.8.2.1.13 | ColumneqptCustAlarmProfileVisibleOutput2 | read-write | mandatory | Shows whether or not to trigger the visible alarm output, for given Profile Index, for external alarm number 2. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: … |
| 1.3.6.1.4.1.637.61.1.23.8.2.1.14 | ColumneqptCustAlarmProfileAudibleOutput2 | read-write | mandatory | Shows whether or not to trigger the audible alarm output, for given Profile Index, for external alarm number 2. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: … |
| 1.3.6.1.4.1.637.61.1.23.8.2.1.15 | ColumneqptCustAlarmProfilePolarity2 | read-write | mandatory | Shows whether the alarm polarity is normal or inversed, for given Profile Index, for external alarm number 2. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: Se… |
| 1.3.6.1.4.1.637.61.1.23.8.2.1.16 | ColumneqptCustAlarmProfileSeverity2 | read-write | mandatory | Shows the severity of the alarm, for given Profile Index, for external alarm number 2. ALCATEL NOTE: SUPPORT: NO INSRVMOD: NA RANGE: 1-5 PERSIST: YES DEFVALUE:… |
| 1.3.6.1.4.1.637.61.1.23.8.2.1.17 | ColumneqptCustAlarmProfileMnemonic3 | read-write | mandatory | The mnemonic of the customizable alarm, for given Profile Index, for external alarm number 3. Maximum length is 16, allowed characters A-Z. ALCATEL NOTE: SUPPO… |
| 1.3.6.1.4.1.637.61.1.23.8.2.1.18 | ColumneqptCustAlarmProfileDescription3 | read-write | mandatory | The description of the customizable alarm, for given Profile Index, for external alarm number 3. Maximum length is 40. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA … |
| 1.3.6.1.4.1.637.61.1.23.8.2.1.19 | ColumneqptCustAlarmProfileVisibleOutput3 | read-write | mandatory | Shows whether or not to trigger the visible alarm output, for given Profile Index, for external alarm number 3. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: … |
| 1.3.6.1.4.1.637.61.1.23.8.2.1.20 | ColumneqptCustAlarmProfileAudibleOutput3 | read-write | mandatory | Shows whether or not to trigger the audible alarm output, for given Profile Index, for external alarm number 3. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: … |
| 1.3.6.1.4.1.637.61.1.23.8.2.1.21 | ColumneqptCustAlarmProfilePolarity3 | read-write | mandatory | Shows whether the alarm polarity is normal or inversed, for given Profile Index, for external alarm number 3. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: Se… |
| 1.3.6.1.4.1.637.61.1.23.8.2.1.22 | ColumneqptCustAlarmProfileSeverity3 | read-write | mandatory | Shows the severity of the alarm, for given Profile Index, for external alarm number 3. ALCATEL NOTE: SUPPORT: NO INSRVMOD: NA RANGE: 1-5 PERSIST: YES DEFVALUE:… |
| 1.3.6.1.4.1.637.61.1.23.8.2.1.23 | ColumneqptCustAlarmProfileMnemonic4 | read-write | mandatory | The mnemonic of the customizable alarm, for given Profile Index, for external alarm number 4. Maximum length is 16, allowed characters A-Z. ALCATEL NOTE: SUPPO… |
| 1.3.6.1.4.1.637.61.1.23.8.2.1.24 | ColumneqptCustAlarmProfileDescription4 | read-write | mandatory | The description of the customizable alarm, for given Profile Index, for external alarm number 4. Maximum length is 40. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA … |
| 1.3.6.1.4.1.637.61.1.23.8.2.1.25 | ColumneqptCustAlarmProfileVisibleOutput4 | read-write | mandatory | Shows whether or not to trigger the visible alarm output, for given Profile Index, for external alarm number 4. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: … |
| 1.3.6.1.4.1.637.61.1.23.8.2.1.26 | ColumneqptCustAlarmProfileAudibleOutput4 | read-write | mandatory | Shows whether or not to trigger the audible alarm output, for given Profile Index, for external alarm number 4. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: … |
| 1.3.6.1.4.1.637.61.1.23.8.2.1.27 | ColumneqptCustAlarmProfilePolarity4 | read-write | mandatory | Shows whether the alarm polarity is normal or inversed, for given Profile Index, for external alarm number 4. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: Se… |
| 1.3.6.1.4.1.637.61.1.23.8.2.1.28 | ColumneqptCustAlarmProfileSeverity4 | read-write | mandatory | Shows the severity of the alarm, for given Profile Index, for external alarm number 4. ALCATEL NOTE: SUPPORT: NO INSRVMOD: NA RANGE: 1-5 PERSIST: YES DEFVALUE:… |
| 1.3.6.1.4.1.637.61.1.23.8.2.1.29 | ColumneqptCustAlarmProfileMnemonic5 | read-write | mandatory | The mnemonic of the customizable alarm, for given Profile Index, for external alarm number 5. Maximum length is 16, allowed characters A-Z. ALCATEL NOTE: SUPPO… |
| 1.3.6.1.4.1.637.61.1.23.8.2.1.30 | ColumneqptCustAlarmProfileDescription5 | read-write | mandatory | The description of the customizable alarm, for given Profile Index, for external alarm number 5. Maximum length is 40. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA … |
| 1.3.6.1.4.1.637.61.1.23.8.2.1.31 | ColumneqptCustAlarmProfileVisibleOutput5 | read-write | mandatory | Shows whether or not to trigger the visible alarm output, for given Profile Index, for external alarm number 5. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: … |
| 1.3.6.1.4.1.637.61.1.23.8.2.1.32 | ColumneqptCustAlarmProfileAudibleOutput5 | read-write | mandatory | Shows whether or not to trigger the audible alarm output, for given Profile Index, for external alarm number 5. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: … |
| 1.3.6.1.4.1.637.61.1.23.8.2.1.33 | ColumneqptCustAlarmProfilePolarity5 | read-write | mandatory | Shows whether the alarm polarity is normal or inversed, for given Profile Index, for external alarm number 5. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: Se… |
| 1.3.6.1.4.1.637.61.1.23.8.2.1.34 | ColumneqptCustAlarmProfileSeverity5 | read-write | mandatory | Shows the severity of the alarm, for given Profile Index, for external alarm number 5. ALCATEL NOTE: SUPPORT: NO INSRVMOD: NA RANGE: 1-5 PERSIST: YES DEFVALUE:… |
| 1.3.6.1.4.1.637.61.1.23.8.3 | TableeqptCustAlarmProfileMappingTable | not-accessible | mandatory | The table listing the profile name to profile Index Mapping. |
| 1.3.6.1.4.1.637.61.1.23.8.3.1 | RoweqptCustAlarmProfileMappingEntry | not-accessible | mandatory | An entry (conceptual row) representing the Customizable Alarm Profile Name to Index mapping. The system automatically creates an entry in this table for each c… |
| 1.3.6.1.4.1.637.61.1.23.8.3.1.1 | ColumneqptCustAlarmProfileMappingName | not-accessible | mandatory | A textual name uniquely identifying this profile. This name has to be unique within the assigned scope. Maximum length is 32, allowed characters A-Z, a-z, 0-9,… |
| 1.3.6.1.4.1.637.61.1.23.8.3.1.2 | ColumneqptCustAlarmProfileMappingIndex | read-only | mandatory | The Customizale Alarms Profile Index. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..20 PERSIST: YES DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.23.9 | NodeeqptMtaTest | |||
| 1.3.6.1.4.1.637.61.1.23.9.1 | ScalareqptMtaTestHeadType | read-write | mandatory | setting the MTA test head type, four-wire mode or two-wire mode. This object should be consistent with external test head equipment, MTA subsystem will operate… |
| 1.3.6.1.4.1.637.61.1.23.10 | TableeqptBoardThermalSensorTable | not-accessible | mandatory | A table representing the actual value and thresholds of Thermal Sensor(s) on boards. One entry corresponds to each sensor on board. The entries are presented o… |
| 1.3.6.1.4.1.637.61.1.23.10.1 | RoweqptBoardThermalSensorEntry | not-accessible | mandatory | An entry of the equipment thermal sensor table on boards ALCATEL NOTE: SUPPORT: YES |
| 1.3.6.1.4.1.637.61.1.23.10.1.1 | ColumneqptBoardThermalSensorId | read-only | mandatory | Index of thermal sensors on board. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..15 PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.23.10.1.2 | ColumneqptBoardThermalSensorActualTemperature | read-only | mandatory | Actual Temperature value read from thermal sensor on board. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: -40..150 PERSIST: NO DEFVALUE: NA UNITS: degree Cels… |
| 1.3.6.1.4.1.637.61.1.23.10.1.3 | ColumneqptBoardThermalSensorTcaThresholdLow | read-only | mandatory | Low Tca threshold of thermal sensor on Board ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: NA PERSIST: NO DEFVALUE: NA UNITS: degree Celsius |
| 1.3.6.1.4.1.637.61.1.23.10.1.4 | ColumneqptBoardThermalSensorTcaThresholdHigh | read-only | mandatory | High Tca threshold of thermal sensor on Board ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: NA PERSIST: NO DEFVALUE: NA UNITS: degree Celsius |
| 1.3.6.1.4.1.637.61.1.23.10.1.5 | ColumneqptBoardThermalSensorShutdownThresholdLow | read-only | mandatory | Low Shutdown threshold of thermal sensor on Board ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: NA PERSIST: NO DEFVALUE: NA UNITS: degree Celsius |
| 1.3.6.1.4.1.637.61.1.23.10.1.6 | ColumneqptBoardThermalSensorShutdownThresholdHigh | read-only | mandatory | High Shutdown threshold of thermal sensor on Board ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: NA PERSIST: NO DEFVALUE: NA UNITS: degree Celsius |
| 1.3.6.1.4.1.637.61.1.23.13 | TableeqptPortMappingTable | not-accessible | mandatory | Equipment PortMapping table, showing the mapping between logical ports and physical ports (faceplate numbering). This table contains one row per logical port o… |
| 1.3.6.1.4.1.637.61.1.23.13.1 | RoweqptPortMappingEntry | not-accessible | mandatory | An entry of the equipment PortMapping table. ALCATEL NOTE: SUPPORT: YES |
| 1.3.6.1.4.1.637.61.1.23.13.1.1 | ColumneqptPortMappingLogPortNbr | not-accessible | mandatory | Index in equipment PortMapping Table: corresponds to the logical port id on the xHUB. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFV… |
| 1.3.6.1.4.1.637.61.1.23.13.1.2 | ColumneqptPortMappingLogPortType | read-only | mandatory | The logical port type corresponds to the link classification. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..4 PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.23.13.1.3 | ColumneqptPortMappingPhyPortSlot | read-only | mandatory | The equipment slot index of the physical port. This slot will point to either a NT or NTIO slot position. This field is not applicable for hostlinks or interna… |
| 1.3.6.1.4.1.637.61.1.23.13.1.4 | ColumneqptPortMappingPhyPortType | read-only | mandatory | The physcial port type. This field is not applicable for hostlinks. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..3,5,10,11,12,13,14 PERSIST: NO DEFVALUE: … |
| 1.3.6.1.4.1.637.61.1.23.13.1.5 | ColumneqptPortMappingPhyPortNbr | read-only | mandatory | The pysical port number, which corresponds to the faceplate number of the sfp/xfp port. This field is not applicable for hostlinks or internal, in which case i… |
| 1.3.6.1.4.1.637.61.1.23.13.1.6 | ColumneqptPortMappingLSMSlot | read-only | mandatory | The equipment slot index of the corresponding LSM slot. This field is only applicable for hostlinks, and downlinks to which a remote LSM slot is assigned. In o… |
| 1.3.6.1.4.1.637.61.1.23.13.1.7 | ColumneqptPortMappingChanges | read-only | mandatory | This counter represents the number of PortMapping configuration changes per row. It is a wraparound counter between 0 and MAX. ALCATEL NOTE: SUPPORT: YES INSRV… |
| 1.3.6.1.4.1.637.61.1.23.14 | ScalareqptPortMappingGlobalChangeCounter | read-only | mandatory | This counter represents the number of global PortMapping configuration changes. It is a wraparound counter between 0 and MAX. SUPPORT: YES INSRVMOD: NA RANGE: … |
| 1.3.6.1.4.1.637.61.1.23.15 | TableeqptPortProtectionTable | not-accessible | mandatory | This table holds the port protection groups |
| 1.3.6.1.4.1.637.61.1.23.15.1 | RoweqptPortProtectionEntry | not-accessible | mandatory | This entry represents a protection group which consists of two ports. These two ports can be on the same LT board, or on different LT's. |
| 1.3.6.1.4.1.637.61.1.23.15.1.1 | ColumneqptPortProtectionPortId | read-only | mandatory | Each row is indexed by the IfIndex of the primary port of the protection group, the one which is protected. Only PON ports can be selected. |
| 1.3.6.1.4.1.637.61.1.23.15.1.2 | ColumneqptPortProtectionRowStatus | read-write | mandatory | All rows instantiated using 'create-and-go' to mate 2 ports in a protection group. Set to 'destroy' to eliminate the protection group. RULE 1 - Cannot create a… |
| 1.3.6.1.4.1.637.61.1.23.15.1.3 | ColumneqptPortProtectionPairedPortId | read-write | mandatory | This attribute represents the IfIndex of the paired port. Only PON ports can be selected. Must satisfy the following VALIDATIONs (otherwise OLT should reject):… |
| 1.3.6.1.4.1.637.61.1.23.15.1.4 | ColumneqptPortProtectionPortStatus | read-only | mandatory | This attribute represents the status of the primary port. Following DEFINITIONS apply: Active - means the port is used for transmission. Inactive - means the s… |
| 1.3.6.1.4.1.637.61.1.23.15.1.5 | ColumneqptPortProtectionPairedPortStatus | read-only | mandatory | This attribute represents the status of the paired port. Following DEFINITIONS apply: Active - means the port is used for transmission. Inactive - means the sy… |
| 1.3.6.1.4.1.637.61.1.23.15.1.6 | ColumneqptPortProtectionSwitchCommand | write-only | mandatory | This attribute represents the IfIndex of the desired port to switch over to. Must satisfy the following VALIDATIONs (otherwise OLT should reject): 1) IfIndex m… |
| 1.3.6.1.4.1.637.61.1.23.15.1.7 | ColumneqptPortProtectionLastSwitchReason | read-only | mandatory | This attribute contains the reason for the last port switchover (if any). 0 = No switch has occurred (since last LT startup). 1 = Manual switch due to port Adm… |
| 1.3.6.1.4.1.637.61.1.23.15.1.8 | ColumneqptPortProtectionNumberOfSwitchovers | read-only | mandatory | This attribute contains the number of switchovers since last LT startup. |
| 1.3.6.1.4.1.637.61.1.23.16 | TableeqptPortProtectionLookupTable | not-accessible | mandatory | This table holds the lookup port protection groups |
| 1.3.6.1.4.1.637.61.1.23.16.1 | RoweqptPortProtectionLookupEntry | not-accessible | mandatory | This entry represents a lookup protection group which consists of two ports. The key is either a primary or a paired port in the eqptPortProtectionTable. |
| 1.3.6.1.4.1.637.61.1.23.16.1.1 | ColumneqptPortProtectionLookupPortId | read-only | mandatory | Each row is indexed by the IfIndex of a port in a protection group, either a primary or a paired port. Only PON ports can be selected. |
| 1.3.6.1.4.1.637.61.1.23.16.1.2 | ColumneqptPortProtectionLookupPrimaryPortId | read-only | mandatory | This attribute represents the IfIndex of the primary port of the protection group to which the key port belongs. Only PON ports can be selected. |
| 1.3.6.1.4.1.637.61.1.23.17 | TableeqptBoardPlannedResourceTable | not-accessible | mandatory | A table representing the actual values of configured hardware resources on boards. This table only displays entries for resources on the boards that support th… |
| 1.3.6.1.4.1.637.61.1.23.17.1 | RoweqptBoardPlannedResourceEntry | not-accessible | mandatory | An entry of the equipment planned resource table ALCATEL NOTE: SUPPORT: YES |
| 1.3.6.1.4.1.637.61.1.23.17.1.1 | ColumneqptBoardPlannedResourceId | not-accessible | mandatory | Index of the planned resource for a board ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: NA PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.23.17.1.2 | ColumneqptBoardPlannedResourceCurrentValue | read-only | mandatory | The actual planned value for the resource ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: NA PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.23.17.1.3 | ColumneqptBoardPlannedResourceMaxValue | read-only | mandatory | The maximum value that the board supports for this resource. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: NA PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.23.17.1.4 | ColumneqptBoardPlannedResourceDescription | read-only | mandatory | A string describing the planned resource for this board. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: NA PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.23.18 | TableeqptPowerTable | not-accessible | mandatory | Equipment power table, representing the power management objects per system, rack or shelf. This table contains one row for the system, rack or shelf that is s… |
| 1.3.6.1.4.1.637.61.1.23.18.1 | RoweqptPowerEntry | not-accessible | mandatory | An entry of the equipment power table. An entry will be instantiated for a system/rack or shelf with active power management functionality. At the time of writ… |
| 1.3.6.1.4.1.637.61.1.23.18.1.1 | ColumneqptPowerId | not-accessible | mandatory | Index in equipment Power Table. Index gives the shelf identification. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.23.18.1.2 | ColumneqptPowerAdminMode | read-write | mandatory | The eqptPowerAdminMode shows the configured power mode. This configured mode will be used to mask any failures detected for non-supported modes. Enumeration is… |
| 1.3.6.1.4.1.637.61.1.23.18.1.3 | ColumneqptPowerOperMode | read-only | mandatory | The eqptPowerOperMode shows the power mode the NE is using at the moment of reading. The VSRM-A (SX) and NGVR (MX) using a power management enabled NTIO (e.g. … |
| 1.3.6.1.4.1.637.61.1.23.18.1.4 | ColumneqptPowerBatType | read-write | mandatory | This object is used to configure the battery type. This configuration only possible for planned powermanagement devices, in this case a planned RANI-B or RPNI-… |
| 1.3.6.1.4.1.637.61.1.23.18.1.5 | ColumneqptPowerBatStartCapacity | read-write | mandatory | The capacity (Ah) of the battery at the moment of installation. The value of the capacity is in 1/100 Ah. Instatiated when eqptPowerBatType is configured. The … |
| 1.3.6.1.4.1.637.61.1.23.18.1.6 | ColumneqptPowerBatPlannedLifetime | read-write | mandatory | Planned lifetime of the installed battery in 1/10 year. The planned lifetime, together with the start capacity, is used to calculate the actual maximal capacit… |
| 1.3.6.1.4.1.637.61.1.23.18.1.7 | ColumneqptPowerBatState | read-only | mandatory | The battery state will provide a view on the state of the battery. Possible states are: charging, charged and discharging. This operational state has meaning f… |
| 1.3.6.1.4.1.637.61.1.23.18.1.8 | ColumneqptPowerBatFailure | read-only | mandatory | The battery failure state will provide an view on the failure state of the battery. This failure state has meaning for devices that have a configured eqptPower… |
| 1.3.6.1.4.1.637.61.1.23.18.1.9 | ColumneqptPowerBatTemperature | read-only | mandatory | Measured temperature of the battery in 1/10 Celcius The value is only readable when the battery type (eqptPowerBatType) is configured and the battery is instal… |
| 1.3.6.1.4.1.637.61.1.23.18.1.10 | ColumneqptPowerBatActualCapacity | read-only | mandatory | The capacity (in % of a fully charged battery) of the battery. The value is only readable when the battery type (eqptPowerBatType) is configured and the batter… |
| 1.3.6.1.4.1.637.61.1.23.18.1.11 | ColumneqptPowerBatDefenseMode | read-write | mandatory | The battery defense modes offers the operator the possibility to select the preferred power defense mode in case the system falls back to the battery mode. The… |
| 1.3.6.1.4.1.637.61.1.23.18.1.12 | ColumneqptPowerBatDefenseThreshold | read-write | mandatory | The threshold gives an indication of the remaining capacity of the battery at the moment the defense defined in eqptPowerBatDefenseMode should be started. The … |
| 1.3.6.1.4.1.637.61.1.23.18.1.13 | ColumneqptPowerACState | read-only | mandatory | The AC power state will provide an view on the state of the AC Power supply. The value is different from no-powermgnt (0) for devices with power management fun… |
| 1.3.6.1.4.1.637.61.1.23.18.1.14 | ColumneqptPowerACFailure | read-only | mandatory | The AC failure state will provide an view on the failure state of the AC power supply. This failure state has meaning when eqptPowerACstate different from defa… |
| 1.3.6.1.4.1.637.61.1.23.18.1.15 | ColumneqptPowerNDCaState | read-only | mandatory | The NDCa (Network DC a) state will provide an view on the state of the Network DC Power supply. The value is different from no-powermgnt (0) for devices with p… |
| 1.3.6.1.4.1.637.61.1.23.18.1.16 | ColumneqptPowerNDCaFailure | read-only | mandatory | The NDCa failure state will provide an view on the failure state of the Network DC a power supply. This failure state has meaning when eqptPowerNDCaState diffe… |
| 1.3.6.1.4.1.637.61.1.23.18.1.17 | ColumneqptPowerNDCbState | read-only | mandatory | The NDCb (Network DC a) state will provide an view on the state of the Network DC b power supply. The value is different from no-powermgnt (0) for devices with… |
| 1.3.6.1.4.1.637.61.1.23.18.1.18 | ColumneqptPowerNDCbFailure | read-only | mandatory | The NDCb failure state will provide an view on the failure state of the Network DC b power supply. This failure state has meaning when eqptPowerNDCbState diffe… |
| 1.3.6.1.4.1.637.61.1.23.18.1.19 | ColumneqptPowerLDCaState | read-only | mandatory | The LDCa power state will provide an view on the state of the local DC a power supply. The value is different from no-powermgnt (0) for devices with power mana… |
| 1.3.6.1.4.1.637.61.1.23.18.1.20 | ColumneqptPowerLDCaFailure | read-only | mandatory | The LDCa failure state will provide an view on the failure state of the local DC a power supply. This failure state has meaning when eqptPowerLDCaState differe… |
| 1.3.6.1.4.1.637.61.1.23.18.1.21 | ColumneqptPowerLDCbState | read-only | mandatory | The LDCb power state will provide an view on the state of the local DC b power suply. The value is different from no-powermgnt (0) for devices with power manag… |
| 1.3.6.1.4.1.637.61.1.23.18.1.22 | ColumneqptPowerLDCbFailure | read-only | mandatory | The LDCb failure state will provide an view on the failure state of the local DC b power supply. This failure state has meaning when eqptPowerLDCbState differe… |
| 1.3.6.1.4.1.637.61.1.23.18.1.23 | ColumneqptPowerInVoltage | read-only | mandatory | Measured incoming voltage in 1/10 Volt Only supported for devices that host an extended power management function (e.g RANI-B and RPNI-B). ALCATEL NOTE: SUPPOR… |
| 1.3.6.1.4.1.637.61.1.23.18.1.24 | ColumneqptPowerInCurrent | read-only | mandatory | Measured incoming current in 1/10 Ampere Only supported for devices that host an extended power management function (e.g RANI-B and RPNI-B). ALCATEL NOTE: SUPP… |
| 1.3.6.1.4.1.637.61.1.23.18.1.25 | ColumneqptPowerInConsumedPower | read-only | mandatory | Calculated incoming consumed power in 1/10 Watt Only supported for devices that host an extended power management function (e.g RANI-B and RPNI-B). ALCATEL NOT… |
| 1.3.6.1.4.1.637.61.1.23.19 | TableeqptPowerSupplyTable | not-accessible | mandatory | Equipment power table, representing the power suplly management objects This table contains one row per power supply supported on the system. In other cases no… |
| 1.3.6.1.4.1.637.61.1.23.19.1 | RoweqptPowerSupplyEntry | not-accessible | mandatory | An entry of the equipment power table. An entry will be instantiated per power supply supported on the system. ALCATEL NOTE: SUPPORT: YES |
| 1.3.6.1.4.1.637.61.1.23.19.1.1 | ColumneqptPowerSupplyId | not-accessible | mandatory | Index in equipment Power Supply Table. This is a number representing the Nth power supply present in the system. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE:… |
| 1.3.6.1.4.1.637.61.1.23.19.1.2 | ColumneqptPowerSupplyPartNumber | read-only | mandatory | Report the part number of the installed power supply ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.23.19.1.3 | ColumneqptPowerSupplyCleiCode | read-only | mandatory | Report the CLEI code of the installed power supply ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.23.19.1.4 | ColumneqptPowerSupplySerNumber | read-only | mandatory | Report the serial number of the installed power supply ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.23.19.1.5 | ColumneqptPowerSupplyVin | read-only | mandatory | Report the incoming voltage arriving at the power supply in millivolt ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.23.19.1.6 | ColumneqptPowerSupplyIin | read-only | mandatory | Report the incoming current arriving at the power supply in milliampere ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS… |
| 1.3.6.1.4.1.637.61.1.23.19.1.7 | ColumneqptPowerSupplyVout | read-only | mandatory | Report the output voltage provided by the power supply in millivolt ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.23.19.1.8 | ColumneqptPowerSupplyIout | read-only | mandatory | Report the output current provided by the power supply in milliampere ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.23.19.1.9 | ColumneqptPowerSupplyTemperature | read-only | mandatory | Report the temperature of the power supply in millidegree ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.23.19.1.10 | ColumneqptPowerSupplyFaultVin | read-only | mandatory | Report the fault or warning occurring for the input voltage ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.23.19.1.11 | ColumneqptPowerSupplyFaultVout | read-only | mandatory | Report the fault or warning occurring for the output voltage ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.23.19.1.12 | ColumneqptPowerSupplyFaultIin | read-only | mandatory | Report the fault or warning occurring for the input current ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.23.19.1.13 | ColumneqptPowerSupplyFaultIout | read-only | mandatory | Report the fault or warning occurring for the output current ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.23.19.1.14 | ColumneqptPowerSupplyFaultTemperature | read-only | mandatory | Report the fault or warning occurring for the tempertaure ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.23.19.1.15 | ColumneqptPowerSupplyFaultCml | read-only | mandatory | Report the fault or warning occurring for the tempertaure ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.23.19.1.16 | ColumneqptPowerSupplyPresent | read-only | mandatory | Report if the power supply is present. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.23.19.1.17 | ColumneqptPowerSupplyFaultDetected | read-only | mandatory | Report if a fault has been detected. If yes, then eqptPowerSupplyFaultVin, eqptPowerSupplyFaultVout, eqptPowerSupplyFaultIin, eqptPowerSupplyFaultIOut, eqptPow… |
| 1.3.6.1.4.1.637.61.1.23.20 | NodeeqptPowerSupplyRftc | |||
| 1.3.6.1.4.1.637.61.1.23.20.1 | TableeqptPowerRftcTable | not-accessible | mandatory | Equipment RFT-C power table, representing the RFT-C management objects This table contains one row per RFT-C module supported on the system. In other cases no … |
| 1.3.6.1.4.1.637.61.1.23.20.1.1 | RoweqptPowerRftcEntry | not-accessible | mandatory | An entry of the equipment RFT-C power table. ALCATEL NOTE: SUPPORT: YES |
| 1.3.6.1.4.1.637.61.1.23.20.1.1.1 | ColumneqptPowerRftcId | read-only | mandatory | Index in equipment Power RFT-C Table. This is a number represents the shelf containting the RFT-C module. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See ab… |
| 1.3.6.1.4.1.637.61.1.23.20.1.1.2 | ColumneqptPowerRftcVCommon | read-only | optional | Report the common voltage arriving at the power supply in millivolt ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: mV |
| 1.3.6.1.4.1.637.61.1.23.20.1.1.3 | ColumneqptPowerRftcICommon | read-only | optional | Report the common current arriving at the power supply in milliampere ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: … |
| 1.3.6.1.4.1.637.61.1.23.20.1.1.4 | ColumneqptPowerRftcTHotspot | read-only | optional | Report the temperature of the power supplys hotspot in degrees celcius ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS:… |
| 1.3.6.1.4.1.637.61.1.23.20.1.1.5 | ColumneqptPowerRftcTAmbient | read-only | optional | Report the ambient temperature of the power supply in degrees celcius ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: … |
| 1.3.6.1.4.1.637.61.1.23.20.1.1.6 | ColumneqptPowerRftcSWVersion | read-only | optional | Report the software version of the RFT-C power supply ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.23.20.1.1.7 | ColumneqptPowerRftcHWVersion | read-only | optional | Report the hardware version of the RFT-C power supply ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.23.20.1.1.8 | ColumneqptPowerRftcHWRevision | read-only | optional | Report hardware revision of the RFT-C power supply ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.23.20.1.1.9 | ColumneqptPowerRftcSerialnumber | read-only | optional | Report serial number of the RFT-C power supply ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.23.20.1.1.10 | ColumneqptPowerRftcManufacturer | read-only | optional | Report the manufacturer code of the RFT-C power supply ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.23.20.1.1.11 | ColumneqptPowerRftcLineCount | read-only | optional | Report the number of lines used on this RFT-C power supply ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.23.20.2 | TableeqptPowerRftcLineTable | not-accessible | mandatory | ALCATEL NOTE: SUPPORT: YES TABLESIZE: DEP as described above |
| 1.3.6.1.4.1.637.61.1.23.20.2.1 | RoweqptPowerRftcLineEntry | not-accessible | mandatory | An entry in the eqptPowerRftcLineTable. ALCATEL NOTE: SUPPORT: YES |
| 1.3.6.1.4.1.637.61.1.23.20.2.1.1 | ColumneqptPowerRftcLineId | read-only | mandatory | Report the line number ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.23.20.2.1.2 | ColumneqptPowerRftcLineStatus | read-only | mandatory | Report the line status. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - |