AT-ALMMON-MIB
44 objects
The AT Alarm Monitoring MIB for managing and reporting device alarms.
Imported Objects
| AT-SMI-MIB | DisplayStringUnsized |
| AT-SYSINFO-MIB | sysinfo |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.207.8.4.4.3.26 | IdentityatAlmMon | The AT Alarm Monitoring MIB for managing and reporting device alarms. | ||
| 1.3.6.1.4.1.207.8.4.4.3.26.1 | TableatAlmMonActionTable | not-accessible | current | A table of information describing alarm monitoring inputs and consequent actions (i.e. fault LED & relay outputs). |
| 1.3.6.1.4.1.207.8.4.4.3.26.1.1 | RowatAlmMonActionEntry | not-accessible | current | The description and configuration of what to do for a specific monitored alarm. |
| 1.3.6.1.4.1.207.8.4.4.3.26.1.1.1 | ColumnatAlmMonActionStackMemberId | read-only | current | The index of the stack member of this alarm action. |
| 1.3.6.1.4.1.207.8.4.4.3.26.1.1.2 | ColumnatAlmMonActionIndex | read-only | current | The numeric identifier of this alarm action. |
| 1.3.6.1.4.1.207.8.4.4.3.26.1.1.3 | ColumnatAlmMonAlarmType | read-only | current | The type of alarm that this action monitors. |
| 1.3.6.1.4.1.207.8.4.4.3.26.1.1.4 | ColumnatAlmMonAlarmTypeSelection | read-only | current | The 1-based index of the alarm of the particular type (as catagorised by atAlmMonAlarmType). |
| 1.3.6.1.4.1.207.8.4.4.3.26.1.1.5 | ColumnatAlmMonActionDescription | read-only | current | The description of this alarm monitoring entry. |
| 1.3.6.1.4.1.207.8.4.4.3.26.1.1.6 | ColumnatAlmMonActionUseRelay1 | read-write | current | Indicates/controls whether or not this alarm monitor drives the first relay output. |
| 1.3.6.1.4.1.207.8.4.4.3.26.1.1.7 | ColumnatAlmMonActionUseRelay2 | read-write | current | Indicates/controls whether or not this alarm monitor drives the second relay output. |
| 1.3.6.1.4.1.207.8.4.4.3.26.1.1.8 | ColumnatAlmMonActionUseRelay3 | read-write | current | Indicates/controls whether or not this alarm monitor drives the third relay output. |
| 1.3.6.1.4.1.207.8.4.4.3.26.1.1.9 | ColumnatAlmMonActionUseFaultLed | read-write | current | Indicates/controls whether or not this alarm monitor drives the fault LED. |
| 1.3.6.1.4.1.207.8.4.4.3.26.1.1.10 | ColumnatAlmMonAbnormalState | read-write | current | Indicates/sets the abnormal (i.e. alarm active) state for a contact input. Only used for contactInput alarm monitors, ignored for all other types. |
| 1.3.6.1.4.1.207.8.4.4.3.26.1.1.11 | ColumnatAlmMonActionState | read-only | current | Indicates the current state of this alarm monitor. |
| 1.3.6.1.4.1.207.8.4.4.3.26.2 | ScalaratAlmMonPerStackConfiguration | read-write | current | Indicates whether to support per stack member configuration. A true value means that atAlmMonAvailableTable, atAlmMonOutputRelayTable, atAlmMonOutputLedTable a… |
| 1.3.6.1.4.1.207.8.4.4.3.26.3 | TableatAlmMonAvailableTable | not-accessible | current | A table of information listing available alarms on the device. |
| 1.3.6.1.4.1.207.8.4.4.3.26.3.1 | RowatAlmMonAvailableEntry | not-accessible | current | The description and configuration of each available alarm. |
| 1.3.6.1.4.1.207.8.4.4.3.26.3.1.1 | ColumnatAlmMonAvailableAlarmId | read-only | current | The unique numeric identifier for this alarm. |
| 1.3.6.1.4.1.207.8.4.4.3.26.3.1.2 | ColumnatAlmMonAvailableType | read-only | current | The type of this alarm, such as externalPSU(1), epsr(2), etc. |
| 1.3.6.1.4.1.207.8.4.4.3.26.3.1.3 | ColumnatAlmMonAvailableTypeIndex | read-only | current | The index of the particular alarm type (catagorised by atAlmMonAlarmType). For some alarms there are multiple sources on the device (i.e. power supplies). In t… |
| 1.3.6.1.4.1.207.8.4.4.3.26.3.1.4 | ColumnatAlmMonAvailableStkId | read-only | current | The id of stack member this alarm triggers on. This object is used for externalPSU(1), contactInput(3), portLinkDown(4), portPoeFailure(7) and temperature(8) a… |
| 1.3.6.1.4.1.207.8.4.4.3.26.3.1.5 | ColumnatAlmMonAvailableIfName | read-only | current | The name of the specific interface that this alarm triggers on, such as 'port1.0.1. This object is used for portLinkDown(4) and portPoeFailure(7) alarm only. |
| 1.3.6.1.4.1.207.8.4.4.3.26.3.1.6 | ColumnatAlmMonAvailableState | read-only | current | Indicates the current state of this alarm. |
| 1.3.6.1.4.1.207.8.4.4.3.26.4 | TableatAlmMonOutputRelayTable | not-accessible | current | This table lists all associations existing on the device between output relays and alarms. Theoretically, an output relay on the device can be triggered by mul… |
| 1.3.6.1.4.1.207.8.4.4.3.26.4.1 | RowatAlmMonOutputRelayEntry | not-accessible | current | This entry reprents an association between one ouput relay and one alarm. To configure an alarm to use an output relay, a user needs to create a new entry. Thi… |
| 1.3.6.1.4.1.207.8.4.4.3.26.4.1.1 | ColumnatAlmMonOutputRelayStkId | read-only | current | The id of stack member that the relay(s) reside on. |
| 1.3.6.1.4.1.207.8.4.4.3.26.4.1.2 | ColumnatAlmMonOutputRelayNumber | read-only | current | The number (i.e. the 1 based index) of the relay. |
| 1.3.6.1.4.1.207.8.4.4.3.26.4.1.3 | ColumnatAlmMonOutputRelayAlarmId | read-only | current | The id of the alarm that may use this relay output. |
| 1.3.6.1.4.1.207.8.4.4.3.26.4.1.4 | ColumnatAlmMonOutputRelayUsage | read-write | current | This object indicates whether or not the relay output is used. Since there are entries only for existing associations between the output relays and the alarms,… |
| 1.3.6.1.4.1.207.8.4.4.3.26.5 | TableatAlmMonOutputLedTable | not-accessible | current | This table lists all associations existing on the device between output LED(s) and alarms. Theoretically, an output LED on the device can be triggered by multi… |
| 1.3.6.1.4.1.207.8.4.4.3.26.5.1 | RowatAlmMonOutputLedEntry | not-accessible | current | This entry reprents an association between one LED and one alarm. To configure an alarm to use an output LED, a user needs to create a new entry. This can be d… |
| 1.3.6.1.4.1.207.8.4.4.3.26.5.1.1 | ColumnatAlmMonOutputLedStkId | read-only | current | The id of stack member that the output LED resides on. |
| 1.3.6.1.4.1.207.8.4.4.3.26.5.1.2 | ColumnatAlmMonOutputLedAlarmId | read-only | current | The id of the alarm that may use this output LED. |
| 1.3.6.1.4.1.207.8.4.4.3.26.5.1.3 | ColumnatAlmMonOutputLedUsage | read-write | current | This object indicates whether or not an LED is used. Since there are entries only for existing associations between the output LED(s) and the alarms, the objec… |
| 1.3.6.1.4.1.207.8.4.4.3.26.6 | TableatAlmMonInputContactTable | not-accessible | current | This table lists all input contacts on the device and their positions. |
| 1.3.6.1.4.1.207.8.4.4.3.26.6.1 | RowatAlmMonInputContactEntry | not-accessible | current | The information of each input contact configuration. |
| 1.3.6.1.4.1.207.8.4.4.3.26.6.1.1 | ColumnatAlmMonInputContactStkId | read-only | current | The id of stack member that the input contact reside on. |
| 1.3.6.1.4.1.207.8.4.4.3.26.6.1.2 | ColumnatAlmMonInputContactNumber | read-only | current | The number (i.e. the 1 based index) of the input contact. |
| 1.3.6.1.4.1.207.8.4.4.3.26.6.1.3 | ColumnatAlmMonInputContactPosition | read-write | current | This object represents the position of the input contact. It is either open or closed. A user can reconfigure the position of an input contact by setting a dif… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AtAlmMonAbnormalState | INTEGER { open(1), closed(2) } | current | Indicates the abnormal (i.e. alarm active) state for a contact input alarm monitor. |
| AtAlmMonActionState | INTEGER { inactive(1), active(2) } | current | Indicates the current state of this alarm monitor. |
| AtAlmMonActionUseOutput | INTEGER { unused(1), used(2) } | current | Indicates whether or not the output device (relay or fault LED) is used for this alarm. |
| AtAlmMonAlarmType | INTEGER { externalPSU(1), epsr(2), contactInput(3), portLinkDown(4), loopDetect(5), mainPse(6), portPoeFailure(7), temperature(8), g8032(9), ufo(10) } | current | Indicates the type of a monitored alarm. |
| AtAlmMonContactPosition | INTEGER { open(1), closed(2) } | current | Indicates the position state for a contact input. |