BFD-STD-MIB
86 objects
Bidirectional Forwarding Management Information Base. Copyright (c) 2014 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info).
Imported Objects
| BFD-TC-STD-MIB | -- RFC 3289 BfdSessIndexTC BfdCtrlDestPortNumberTC BfdCtrlSourcePortNumberTC BfdIntervalTC BfdMultiplierTC |
| DIFFSERV-MIB | IndexIntegerNextFree |
| IANA-BFD-TC-STD-MIB | IANAbfdDiagTC IANAbfdSessAuthenticationKeyTC IANAbfdSessAuthenticationTypeTC IANAbfdSessOperModeTC IANAbfdSessStateTC IANAbfdSessTypeTC |
| IF-MIB | -- RFC 2580 InterfaceIndexOrZero |
| INET-ADDRESS-MIB | -- RFC 2863 InetAddress InetAddressType InetPortNumber |
| SNMPv2-CONF | -- RFC 2579 MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Integer32 mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | -- RFC 2578 TruthValue RowStatus StorageType TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.222 | IdentitybfdMIB | Bidirectional Forwarding Management Information Base. Copyright (c) 2014 IETF Trust and the persons identified as authors of the code. All rights reserved. Red… | ||
| 1.3.6.1.2.1.222.0 | NodebfdNotifications | |||
| 1.3.6.1.2.1.222.0.1 | NotificationbfdSessUp | current | This notification is generated when the bfdSessState object for one or more contiguous entries in bfdSessTable are about to enter the up(4) state from some oth… | |
| 1.3.6.1.2.1.222.0.2 | NotificationbfdSessDown | current | This notification is generated when the bfdSessState object for one or more contiguous entries in bfdSessTable are about to enter the down(2) or adminDown(1) s… | |
| 1.3.6.1.2.1.222.1 | NodebfdObjects | |||
| 1.3.6.1.2.1.222.1.1 | NodebfdScalarObjects | |||
| 1.3.6.1.2.1.222.1.1.1 | ScalarbfdAdminStatus | read-write | current | The desired global administrative status of the BFD system in this device. |
| 1.3.6.1.2.1.222.1.1.2 | ScalarbfdOperStatus | read-only | current | Indicates the actual operational status of the BFD system in this device. When this value is down(2), all entries in the bfdSessTable MUST have their bfdSessOp… |
| 1.3.6.1.2.1.222.1.1.3 | ScalarbfdNotificationsEnable | read-write | current | If this object is set to true(1), then it enables the emission of bfdSessUp and bfdSessDown notifications; otherwise, these notifications are not emitted. |
| 1.3.6.1.2.1.222.1.1.4 | ScalarbfdSessIndexNext | read-only | current | This object contains an unused value for bfdSessIndex that can be used when creating entries in the table. A zero indicates that no entries are available, but … |
| 1.3.6.1.2.1.222.1.2 | TablebfdSessTable | not-accessible | current | The BFD Session Table describes the BFD sessions. |
| 1.3.6.1.2.1.222.1.2.1 | RowbfdSessEntry | not-accessible | current | The BFD Session Entry describes the BFD session. |
| 1.3.6.1.2.1.222.1.2.1.1 | ColumnbfdSessIndex | not-accessible | current | This object contains an index used to represent a unique BFD session on this device. Managers should obtain new values for row creation in this table by readin… |
| 1.3.6.1.2.1.222.1.2.1.2 | ColumnbfdSessVersionNumber | read-create | current | The version number of the BFD protocol that this session is running in. Write access is available for this object to provide the ability to set the desired ver… |
| 1.3.6.1.2.1.222.1.2.1.3 | ColumnbfdSessType | read-create | current | This object specifies the type of this BFD session. |
| 1.3.6.1.2.1.222.1.2.1.4 | ColumnbfdSessDiscriminator | read-create | current | This object specifies the local discriminator for this BFD session, which is used to uniquely identify it. |
| 1.3.6.1.2.1.222.1.2.1.5 | ColumnbfdSessRemoteDiscr | read-only | current | This object specifies the session discriminator chosen by the remote system for this BFD session. The value may be zero(0) if the remote discriminator is not y… |
| 1.3.6.1.2.1.222.1.2.1.6 | ColumnbfdSessDestinationUdpPort | read-create | current | This object specifies the destination UDP port number used for this BFD session's Control packets. The value may be zero(0) if the session is in adminDown(1) s… |
| 1.3.6.1.2.1.222.1.2.1.7 | ColumnbfdSessSourceUdpPort | read-create | current | This object specifies the source UDP port number used for this BFD session's Control packets. The value may be zero(0) if the session is in adminDown(1) state.… |
| 1.3.6.1.2.1.222.1.2.1.8 | ColumnbfdSessEchoSourceUdpPort | read-create | current | This object specifies the source UDP port number used for this BFD session's Echo packets. The value may be zero(0) if the session is not running in the Echo m… |
| 1.3.6.1.2.1.222.1.2.1.9 | ColumnbfdSessAdminStatus | read-create | current | Denotes the desired operational status of the BFD session. A transition to enabled(1) will start the BFD state machine for the session. The state machine will … |
| 1.3.6.1.2.1.222.1.2.1.10 | ColumnbfdSessOperStatus | read-only | current | Denotes the actual operational status of the BFD session. If the value of bfdOperStatus is down(2), this value MUST eventually be down(2) as well. If the value… |
| 1.3.6.1.2.1.222.1.2.1.11 | ColumnbfdSessState | read-only | current | Configured BFD session state. |
| 1.3.6.1.2.1.222.1.2.1.12 | ColumnbfdSessRemoteHeardFlag | read-only | current | This object specifies the status of BFD packet reception from the remote system. Specifically, it is set to true(1) if the local system is actively receiving B… |
| 1.3.6.1.2.1.222.1.2.1.13 | ColumnbfdSessDiag | read-only | current | A diagnostic code specifying the local system's reason for the last transition of the session from up(4) to some other state. |
| 1.3.6.1.2.1.222.1.2.1.14 | ColumnbfdSessOperMode | read-create | current | This object specifies the operational mode of this BFD session. |
| 1.3.6.1.2.1.222.1.2.1.15 | ColumnbfdSessDemandModeDesiredFlag | read-create | current | This object indicates the local system's desire to use Demand mode. Specifically, it is set to true(1) if the local system wishes to use Demand mode or false(2… |
| 1.3.6.1.2.1.222.1.2.1.16 | ColumnbfdSessControlPlaneIndepFlag | read-create | current | This object indicates the local system's ability to continue to function through a disruption of the control plane. Specifically, it is set to true(1) if the l… |
| 1.3.6.1.2.1.222.1.2.1.17 | ColumnbfdSessMultipointFlag | read-create | current | This object indicates the Multipoint (M) bit for this session. It is set to true(1) if the Multipoint (M) bit is set to 1. Otherwise, the value is set to false… |
| 1.3.6.1.2.1.222.1.2.1.18 | ColumnbfdSessInterface | read-create | current | This object contains an interface index used to indicate the interface that this BFD session is running on. This value can be zero if there is no interface ass… |
| 1.3.6.1.2.1.222.1.2.1.19 | ColumnbfdSessSrcAddrType | read-create | current | This object specifies the IP address type of the source IP address of this BFD session. The value of unknown(0) is allowed only when the session is singleHop(1… |
| 1.3.6.1.2.1.222.1.2.1.20 | ColumnbfdSessSrcAddr | read-create | current | This object specifies the source IP address of this BFD session. The format of this object is controlled by the bfdSessSrcAddrType object. |
| 1.3.6.1.2.1.222.1.2.1.21 | ColumnbfdSessDstAddrType | read-create | current | This object specifies the IP address type of the neighboring IP address that is being monitored with this BFD session. The value of unknown(0) is allowed only … |
| 1.3.6.1.2.1.222.1.2.1.22 | ColumnbfdSessDstAddr | read-create | current | This object specifies the neighboring IP address that is being monitored with this BFD session. The format of this object is controlled by the bfdSessDstAddrTy… |
| 1.3.6.1.2.1.222.1.2.1.23 | ColumnbfdSessGTSM | read-create | current | Setting the value of this object to false(2) will disable GTSM protection of the BFD session. GTSM MUST be enabled on a singleHop(1) session if no authenticati… |
| 1.3.6.1.2.1.222.1.2.1.24 | ColumnbfdSessGTSMTTL | read-create | current | This object is valid only when bfdSessGTSM protection is enabled on the system. This object indicates the minimum allowed Time to Live (TTL) for received BFD C… |
| 1.3.6.1.2.1.222.1.2.1.25 | ColumnbfdSessDesiredMinTxInterval | read-create | current | This object specifies the minimum interval, in microseconds, that the local system would like to use when transmitting BFD Control packets. The value of zero(0… |
| 1.3.6.1.2.1.222.1.2.1.26 | ColumnbfdSessReqMinRxInterval | read-create | current | This object specifies the minimum interval, in microseconds, between received BFD Control packets the local system is capable of supporting. The value of zero(… |
| 1.3.6.1.2.1.222.1.2.1.27 | ColumnbfdSessReqMinEchoRxInterval | read-create | current | This object specifies the minimum interval, in microseconds, between received BFD Echo packets that this system is capable of supporting. The value must be zer… |
| 1.3.6.1.2.1.222.1.2.1.28 | ColumnbfdSessDetectMult | read-create | current | This object specifies the Detect time multiplier. |
| 1.3.6.1.2.1.222.1.2.1.29 | ColumnbfdSessNegotiatedInterval | read-only | current | This object specifies the negotiated interval, in microseconds, that the local system is transmitting BFD Control packets. |
| 1.3.6.1.2.1.222.1.2.1.30 | ColumnbfdSessNegotiatedEchoInterval | read-only | current | This object specifies the negotiated interval, in microseconds, that the local system is transmitting BFD Echo packets. The value is expected to be zero if the… |
| 1.3.6.1.2.1.222.1.2.1.31 | ColumnbfdSessNegotiatedDetectMult | read-only | current | This object specifies the Detect time multiplier. |
| 1.3.6.1.2.1.222.1.2.1.32 | ColumnbfdSessAuthPresFlag | read-create | current | This object indicates the local system's desire to use authentication. Specifically, it is set to true(1) if the local system wishes the session to be authenti… |
| 1.3.6.1.2.1.222.1.2.1.33 | ColumnbfdSessAuthenticationType | read-create | current | The authentication type used for this BFD session. This field is valid only when the Authentication Present bit is set. MAX-ACCESS to this object as well as ot… |
| 1.3.6.1.2.1.222.1.2.1.34 | ColumnbfdSessAuthenticationKeyID | read-create | current | The authentication key ID in use for this session. This object permits multiple keys to be active simultaneously. The value -1 indicates that no authentication… |
| 1.3.6.1.2.1.222.1.2.1.35 | ColumnbfdSessAuthenticationKey | read-create | current | The authentication key. When the bfdSessAuthenticationType is simplePassword(1), the value of this object is the password present in the BFD packets. When the … |
| 1.3.6.1.2.1.222.1.2.1.36 | ColumnbfdSessStorageType | read-create | current | This variable indicates the storage type for this object. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in t… |
| 1.3.6.1.2.1.222.1.2.1.37 | ColumnbfdSessRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. When a row in this table has a row in the active(1) state, no objects in this row c… |
| 1.3.6.1.2.1.222.1.3 | TablebfdSessPerfTable | not-accessible | current | This table specifies BFD session performance counters. |
| 1.3.6.1.2.1.222.1.3.1 | RowbfdSessPerfEntry | not-accessible | current | An entry in this table is created by a BFD-enabled node for every BFD session. bfdSessPerfDiscTime is used to indicate potential discontinuity for all counter … |
| 1.3.6.1.2.1.222.1.3.1.1 | ColumnbfdSessPerfCtrlPktIn | read-only | current | The total number of BFD control messages received for this BFD session. It MUST be equal to the least significant 32 bits of bfdSessPerfCtrlPktInHC if supporte… |
| 1.3.6.1.2.1.222.1.3.1.2 | ColumnbfdSessPerfCtrlPktOut | read-only | current | The total number of BFD control messages sent for this BFD session. It MUST be equal to the least significant 32 bits of bfdSessPerfCtrlPktOutHC if supported, … |
| 1.3.6.1.2.1.222.1.3.1.3 | ColumnbfdSessPerfCtrlPktDrop | read-only | current | The total number of BFD control messages received for this session yet dropped for being invalid. It MUST be equal to the least significant 32 bits of bfdSessP… |
| 1.3.6.1.2.1.222.1.3.1.4 | ColumnbfdSessPerfCtrlPktDropLastTime | read-only | current | The value of sysUpTime on the most recent occasion at which received the BFD control message for this session was dropped. If no such up event exists, this obj… |
| 1.3.6.1.2.1.222.1.3.1.5 | ColumnbfdSessPerfEchoPktIn | read-only | current | The total number of BFD Echo messages received for this BFD session. It MUST be equal to the least significant 32 bits of bfdSessPerfEchoPktInHC if supported, … |
| 1.3.6.1.2.1.222.1.3.1.6 | ColumnbfdSessPerfEchoPktOut | read-only | current | The total number of BFD Echo messages sent for this BFD session. It MUST be equal to the least significant 32 bits of bfdSessPerfEchoPktOutHC if supported, and… |
| 1.3.6.1.2.1.222.1.3.1.7 | ColumnbfdSessPerfEchoPktDrop | read-only | current | The total number of BFD Echo messages received for this session yet dropped for being invalid. It MUST be equal to the least significant 32 bits of bfdSessPerf… |
| 1.3.6.1.2.1.222.1.3.1.8 | ColumnbfdSessPerfEchoPktDropLastTime | read-only | current | The value of sysUpTime on the most recent occasion at which received the BFD Echo message for this session was dropped. If no such up event has been issued, th… |
| 1.3.6.1.2.1.222.1.3.1.9 | ColumnbfdSessUpTime | read-only | current | The value of sysUpTime on the most recent occasion at which the session came up. If no such event has been issued, this object contains a zero value. |
| 1.3.6.1.2.1.222.1.3.1.10 | ColumnbfdSessPerfLastSessDownTime | read-only | current | The value of sysUpTime on the most recent occasion at which the last time communication was lost with the neighbor. If no down event has been issued, this obje… |
| 1.3.6.1.2.1.222.1.3.1.11 | ColumnbfdSessPerfLastCommLostDiag | read-only | current | The BFD diag code for the last time communication was lost with the neighbor. If such an event has not been issued, this object contains a zero value. |
| 1.3.6.1.2.1.222.1.3.1.12 | ColumnbfdSessPerfSessUpCount | read-only | current | The number of times this session has gone into the Up state since the system last rebooted. |
| 1.3.6.1.2.1.222.1.3.1.13 | ColumnbfdSessPerfDiscTime | read-only | current | The value of sysUpTime on the most recent occasion at which any one or more of the session counters suffered a discontinuity. The relevant counters are the spe… |
| 1.3.6.1.2.1.222.1.3.1.14 | ColumnbfdSessPerfCtrlPktInHC | read-only | current | This value represents the total number of BFD control messages received for this BFD session. The least significant 32 bits MUST be equal to bfdSessPerfCtrlPkt… |
| 1.3.6.1.2.1.222.1.3.1.15 | ColumnbfdSessPerfCtrlPktOutHC | read-only | current | This value represents the total number of BFD control messages transmitted for this BFD session. The least significant 32 bits MUST be equal to bfdSessPerfCtrl… |
| 1.3.6.1.2.1.222.1.3.1.16 | ColumnbfdSessPerfCtrlPktDropHC | read-only | current | This value represents the total number of BFD control messages received for this BFD session yet dropped for being invalid. The least significant 32 bits MUST … |
| 1.3.6.1.2.1.222.1.3.1.17 | ColumnbfdSessPerfEchoPktInHC | read-only | current | This value represents the total number of BFD Echo messages received for this BFD session. The least significant 32 bits MUST be equal to bfdSessPerfEchoPktIn,… |
| 1.3.6.1.2.1.222.1.3.1.18 | ColumnbfdSessPerfEchoPktOutHC | read-only | current | This value represents the total number of BFD Echo messages transmitted for this BFD session. The least significant 32 bits MUST be equal to bfdSessPerfEchoPkt… |
| 1.3.6.1.2.1.222.1.3.1.19 | ColumnbfdSessPerfEchoPktDropHC | read-only | current | This value represents the total number of BFD Echo messages received for this BFD session yet dropped for being invalid. The least significant 32 bits MUST be … |
| 1.3.6.1.2.1.222.1.4 | TablebfdSessDiscMapTable | not-accessible | current | The BFD Session Discriminator Mapping Table maps a local discriminator value to the associated BFD session's bfdSessIndex found in the bfdSessionTable. |
| 1.3.6.1.2.1.222.1.4.1 | RowbfdSessDiscMapEntry | not-accessible | current | The BFD Session Discriminator Mapping Entry specifies a mapping between a local discriminator and a BFD session. |
| 1.3.6.1.2.1.222.1.4.1.1 | ColumnbfdSessDiscMapIndex | read-only | current | This object specifies a mapping between a local discriminator and a BFD session in the BfdSessTable. |
| 1.3.6.1.2.1.222.1.5 | TablebfdSessIpMapTable | not-accessible | current | The BFD Session IP Mapping Table maps given bfdSessInterface, bfdSessSrcAddrType, bfdSessSrcAddr, bfdSessDstAddrType, and bfdSessDstAddr to an associated BFD s… |
| 1.3.6.1.2.1.222.1.5.1 | RowbfdSessIpMapEntry | not-accessible | current | The BFD Session IP Map Entry contains a mapping from the IP information for a session to the session in the bfdSessionTable. |
| 1.3.6.1.2.1.222.1.5.1.1 | ColumnbfdSessIpMapIndex | read-only | current | This object specifies the BfdSessIndexTC referred to by the indexes of this row. In essence, a mapping is provided between these indexes and the BfdSessTable. |
| 1.3.6.1.2.1.222.2 | NodebfdConformance | |||
| 1.3.6.1.2.1.222.2.1 | NodebfdGroups | |||
| 1.3.6.1.2.1.222.2.1.1 | GroupbfdSessionGroup | current | Collection of objects needed for BFD sessions. | |
| 1.3.6.1.2.1.222.2.1.2 | GroupbfdSessionReadOnlyGroup | current | Collection of read-only objects needed for BFD sessions. | |
| 1.3.6.1.2.1.222.2.1.3 | GroupbfdSessionPerfGroup | current | Collection of objects needed to monitor the performance of BFD sessions. | |
| 1.3.6.1.2.1.222.2.1.4 | GroupbfdSessionPerfHCGroup | current | Collection of objects needed to monitor the performance of BFD sessions for which the values of bfdSessPerfPktIn and bfdSessPerfPktOut wrap around too quickly. | |
| 1.3.6.1.2.1.222.2.1.5 | GroupbfdNotificationGroup | current | Set of notifications implemented in this module. | |
| 1.3.6.1.2.1.222.2.2 | NodebfdCompliances | |||
| 1.3.6.1.2.1.222.2.2.1 | CompliancebfdModuleFullCompliance | current | Compliance statement for agents that provide full support for the BFD-MIB module. Such devices can then be monitored and also be configured using this MIB modu… | |
| 1.3.6.1.2.1.222.2.2.2 | CompliancebfdModuleReadOnlyCompliance | read-only | current | Compliance requirement for implementations that only provide read-only support for BFD-MIB. Such devices can then be monitored but cannot be configured using t… |