BRCM-BATTERY-MGMT-MIB
69 objects
Broadcom proprietary MIB for runtime management of objects related to battery powered devices.
Imported Objects
| BRCM-CABLEDATA-MGMT-MIB | cableDataMgmtMIBObjects |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString TEXTUAL-CONVENTION TruthValue |
| UPS-MIB | PositiveInteger |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4413.2.2.2.1.10 | IdentitybatteryMgmt | Broadcom proprietary MIB for runtime management of objects related to battery powered devices. | ||
| 1.3.6.1.4.1.4413.2.2.2.1.10.1 | NodebatteryMgmtBase | |||
| 1.3.6.1.4.1.4413.2.2.2.1.10.1.1 | TablebatteryTable | not-accessible | current | A table of batteries present on the system. |
| 1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1 | RowbatteryEntry | not-accessible | current | An entry describing the characteristics of an individual battery. |
| 1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.1 | ColumnbattIndex | not-accessible | current | Identifies the instance number of this individual battery. |
| 1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.2 | ColumnbattCapacity | read-only | current | The charge capacity of this battery. |
| 1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.3 | ColumnbattMaximumVoltage | read-only | current | The voltage at which this battery is considered to be fully charged. Note that if battChargerMaximumCharge is set to less than 100%, the battery will never be … |
| 1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.4 | ColumnbattMinimumVoltage | read-only | current | The voltage at which this battery is considered to be fully discharged. |
| 1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.5 | ColumnbattMeasuredVoltage | read-only | current | The most recently measured voltage of this battery. |
| 1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.6 | ColumnbattIsValid | read-only | current | Indicates whether this battery is considered valid by the battery charger. A value of false(2) here indicates some kind of failure with this battery. |
| 1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.7 | ColumnbattIsSelected | read-only | current | Indicates whether this battery is currently selected for charging or discharging. |
| 1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.8 | ColumnbattEstimatedMinutesRemaining | read-only | current | An estimate of the time to depletion of this battery's charge under the present load conditions if the utility power is off and remains off, or if it were to b… |
| 1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.9 | ColumnbattEstimatedChargeRemaining | read-only | current | An estimate of this battery's charge remaining expressed as a percent of full charge. |
| 1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.10 | ColumnbattErrors | read-only | current | Indicates the number of errors reported by the charger when trying to charge this battery. This object should always have a value of zero if all is well with t… |
| 1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.11 | ColumnbattEpromRevision | read-only | current | The version of the battery EPROM. |
| 1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.12 | ColumnbattPackSupplier | read-only | current | Battery Pack Supplier |
| 1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.13 | ColumnbattModelNumber | read-only | current | Battery Model Number. |
| 1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.14 | ColumnbattSerialNumber | read-only | current | Battery Serial Number. |
| 1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.15 | ColumnbattCellSupplier | read-only | current | Battery Cell Supplier. |
| 1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.16 | ColumnbattCellCapacity | read-only | current | Battery Cell Capacity. |
| 1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.17 | ColumnbattCellDateCode | read-only | current | Battery Cell Date Code(mmddyy). |
| 1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.18 | ColumnbattPackDateCode | read-only | current | Battery Pack Date Code(mmddyy). |
| 1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.19 | ColumnbattTemperature | read-only | current | The temperature as reported by this battery. If the battery pack does not support temperature measurement then this object will not be supported. |
| 1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.20 | ColumnbattPackGUID | read-only | current | The battery pack globally unique ID (0x<cc><iiiiiiii><ff>). Where <cc> is an 8-bit CRC, <iiiiiiii> is the 48-bit ID, and <ff> is the 8-bit family code. If the … |
| 1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.21 | ColumnbattActualCapacity | read-only | current | The current maximum charge capacity of this battery. If the hardware does not support periodic life testing, this will return the same value as battDesignCapac… |
| 1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.22 | ColumnbattAge | read-only | current | Specifies the current age of the battery as a percentage of its design capacity. This value could be calculated by dividing battActualCapacity by battDesignCap… |
| 1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.23 | ColumnbattNextLifeTest | read-write | current | Returns/specifies the date and time of the next life test (mmddyyyy hh:mm:ss) for the specified pack. If the charger does not support periodic life testing the… |
| 1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.24 | ColumnbattDischargeTable | read-only | current | Returns the full discharge table for the specified battery as a comma-delimited string |
| 1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.25 | ColumnbattCompressedDischargeTable | read-only | current | Returns the compressed discharge table from the specified battery |
| 1.3.6.1.4.1.4413.2.2.2.1.10.1.1.1.26 | ColumnbattInvalidateNonVolSlot | read-write | current | Invalidates the specified non-vol slot |
| 1.3.6.1.4.1.4413.2.2.2.1.10.2 | NodebatteryCharger | |||
| 1.3.6.1.4.1.4413.2.2.2.1.10.2.1 | ScalarbattChargerMicrocodeVersion | read-only | current | The version of the battery charger microcode. |
| 1.3.6.1.4.1.4413.2.2.2.1.10.2.2 | ScalarbattChargerMicrocodeBuildTime | read-only | current | The build date and time of the battery charger microcode. |
| 1.3.6.1.4.1.4413.2.2.2.1.10.2.3 | ScalarbattChargerInputVoltage | read-only | current | The most recently measured input voltage to the battery charger. Typically, if operating on battery power, this value will approach zero. If operating on utili… |
| 1.3.6.1.4.1.4413.2.2.2.1.10.2.4 | ScalarbattChargerState | read-only | current | The current state of the battery charger. Note that all states may not be supported on all types of chargers. |
| 1.3.6.1.4.1.4413.2.2.2.1.10.2.5 | ScalarbattChargerMaximumCharge | read-only | current | Reports the level to which the charger will charge the batteries. |
| 1.3.6.1.4.1.4413.2.2.2.1.10.2.6 | ScalarbattChargerReplaceBatteryThreshold | read-write | current | Specifies the minimum charge percentage that the battery must be able to reach when charging. If a battery cannot be charged above this percentage, it will be … |
| 1.3.6.1.4.1.4413.2.2.2.1.10.2.7 | ScalarbattChargerLowChargeThreshold | read-write | current | Specifies the charge percentage at which the bcmAlarmLowBatteryCharge will be raised. |
| 1.3.6.1.4.1.4413.2.2.2.1.10.2.8 | ScalarbattChargerHardwareFaultsAllowed | read-write | current | Specifies the hardware faults that are currently allowed to affect the battery subsystem. If the charger does not support hardware faults then this object will… |
| 1.3.6.1.4.1.4413.2.2.2.1.10.2.9 | ScalarbattChargerHardwareFaultsDetected | read-write | current | Specifies the hardware faults that are currently active in the battery subsystem. Writing any valoe to this entry caues ALL faults to be reset. See bcmAlarmHar… |
| 1.3.6.1.4.1.4413.2.2.2.1.10.2.10 | ScalarbattChargerLifeTestInterval | read-write | current | Specifies the number of days between periodic life tests (default = 180). If the charger does not support periodic life testing then this object will not be su… |
| 1.3.6.1.4.1.4413.2.2.2.1.10.2.11 | ScalarbattChargerLifeTestEnable | read-write | current | Specifies whether or not periodic life testing is enabled. If the charger does not support periodic life testing then this object will not be supported. Defaul… |
| 1.3.6.1.4.1.4413.2.2.2.1.10.2.12 | ScalarbattChargerLifeTestTOD | read-write | current | Specifies the time of day (hh:mm) using a 24-hour clock at which battery life testing will be scheduled. If the charger does not support periodic life testing … |
| 1.3.6.1.4.1.4413.2.2.2.1.10.2.13 | ScalarbattChargerLifeTestStatus | read-only | current | Returns the current life test state |
| 1.3.6.1.4.1.4413.2.2.2.1.10.2.14 | ScalarbattChargerAbortLifeTest | read-write | current | Setting this to TRUE aborts an in-progress life test. Reads always return FALSE. No effect if a life test is not currently in progress. If the charger does not… |
| 1.3.6.1.4.1.4413.2.2.2.1.10.3 | NodebatteryPowerMgmt | |||
| 1.3.6.1.4.1.4413.2.2.2.1.10.3.1 | NodebatteryPowerMgmtInterfaces | |||
| 1.3.6.1.4.1.4413.2.2.2.1.10.3.1.1 | ScalarbattPowerMgmtCmDelay | read-write | current | Specifies the number of seconds following transition to battery power before the DOCSIS CM interface will enter power management mode. If set to -1, the interf… |
| 1.3.6.1.4.1.4413.2.2.2.1.10.3.1.2 | ScalarbattPowerMgmtEthernetDelay | read-write | current | Specifies the number of seconds following transition to battery power before the ethernet interface will enter power management mode. If set to -1, the interfa… |
| 1.3.6.1.4.1.4413.2.2.2.1.10.3.1.3 | ScalarbattPowerMgmtUsbDelay | read-write | current | Specifies the number of seconds following transition to battery power before the USB interface will enter power management mode. If set to -1, the interface wi… |
| 1.3.6.1.4.1.4413.2.2.2.1.10.3.1.4 | ScalarbattPowerMgmtWiFiDelay | read-write | current | Specifies the number of seconds following transition to battery power before the WiFi interface will enter power management mode. If set to -1, the interface w… |
| 1.3.6.1.4.1.4413.2.2.2.1.10.3.1.5 | ScalarbattPowerMgmtBluetoothDelay | read-write | current | Specifies the number of seconds following transition to battery power before the bluetooth interface will enter power management mode. If set to -1, the interf… |
| 1.3.6.1.4.1.4413.2.2.2.1.10.3.1.6 | ScalarbattPowerMgmtHpnaDelay | read-write | current | Specifies the number of seconds following transition to battery power before the HPNA interface will enter power management mode. If set to -1, the interface w… |
| 1.3.6.1.4.1.4413.2.2.2.1.10.4 | NodebatteryBcmAlarms | |||
| 1.3.6.1.4.1.4413.2.2.2.1.10.4.1 | IdentitybcmAlarmLowBatteryCharge | current | The value of upsEstimatedChargeRemaining is less than or equal to the value of battChargerLowChargeThreshold. | |
| 1.3.6.1.4.1.4413.2.2.2.1.10.4.2 | IdentitybcmAlarmTempBadChargeSuspended | current | The temperature of the device has exceeded operational limits for safe battery charging, and battery charging has been suspended. | |
| 1.3.6.1.4.1.4413.2.2.2.1.10.4.3 | IdentitybcmAlarmTempBadPowerReduced | current | The temperature of the device has exceeded operational limits, and the device has been placed in low power mode in an to attempt to reduce heat production. | |
| 1.3.6.1.4.1.4413.2.2.2.1.10.4.4 | IdentitybcmAlarmBatteryMissing | current | There are no batteries installed in the device and the device will not be capable of sustaining power in the event of utility power loss. | |
| 1.3.6.1.4.1.4413.2.2.2.1.10.4.5 | IdentitybcmAlarmTempBadDischargeInhibited | current | The temperature of the device has exceeded operational limits for safe battery discharging, and battery discharging has been inhibited. | |
| 1.3.6.1.4.1.4413.2.2.2.1.10.4.6 | IdentitybcmAlarmHardwareFault | current | Indicates that a hardware fault that is enabled in battChargerHardwareFaultsAllowed has been detected in battChargerHardwareFaultsDetected (i.e. the logical AN… | |
| 1.3.6.1.4.1.4413.2.2.2.1.10.4.7 | IdentitybcmAlarmLowPower | current | Indicates that the system has been placed into low power mode in order to extend battery life. | |
| 1.3.6.1.4.1.4413.2.2.2.1.10.5 | NodebatteryThermalMgmt | |||
| 1.3.6.1.4.1.4413.2.2.2.1.10.5.1 | TablebatteryThermalSensorTable | not-accessible | current | A table of thermal sensors present on the system. |
| 1.3.6.1.4.1.4413.2.2.2.1.10.5.1.1 | RowbatteryThermalSensorEntry | not-accessible | current | An entry describing a single thermal sensor. |
| 1.3.6.1.4.1.4413.2.2.2.1.10.5.1.1.1 | ColumnbattThermalSensorType | not-accessible | current | Identifies the type of this thermal sensor. |
| 1.3.6.1.4.1.4413.2.2.2.1.10.5.1.1.2 | ColumnbattThermalSensorIndex | not-accessible | current | Identifies the instance number of this thermal sensor. |
| 1.3.6.1.4.1.4413.2.2.2.1.10.5.1.1.3 | ColumnbattThermalSensorDescription | read-only | current | A textual description of this thermal sensor. |
| 1.3.6.1.4.1.4413.2.2.2.1.10.5.1.1.4 | ColumnbattThermalSensorTemperature | read-only | current | The temperature as reported by this thermal sensor. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| HardwareFault | BITS { chargerOverVoltageFault(0), chargerOverCurrentFault(1), chargerPrequalVoltageFault(3), chargerDischargeOverCurrentFault(4), chargerGeneralDischargeFault(5), chargerInputOverVoltageFault(8), chargerUnexpectedBatteryVoltage(9), chargerUnexpectedBatteryCurrent(10), chargerBatteryOverVoltage(11), chargerBatteryEnablesShorted(12) } | current | This data type represents a bit-mask of potential hardware fault conditions in the battChargerHardwareFaultsAllowed and battChargerHardwareFaultsDetected entries. |