BRCM-CM-ENGINEERING-MIB
83 objects
Broadcom cabledata private MIB
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4413.2.99.1.1.3.2 | IdentitycablemodemEngineering | Broadcom cabledata private MIB | ||
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.1 | NodecmEngrBase | |||
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.1.1 | ScalarcmEngr33xxOpcode | read-write | current | The hardware address or multibyte opcode to access in a 33xx family device when executing a cmEngr33xxCommand operation. |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.1.2 | ScalarcmEngr33xxData | read-write | current | The data read from or to be written to a 33xx family device when executing a cmEngr33xxCommand operation. |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.1.3 | ScalarcmEngr33xxCommand | read-write | current | Setting this value to read(0) will cause a read operation to be executed on the multibyte opcode specified in cmEngr33xxOpcode. The data read back from the ope… |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2 | NodecmEngrDownstreamCalibration | |||
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.1 | ScalarcmDsCalZeroTunerCoefs | read-write | current | Setting this object to true(1) will result in all writable objects in the cmDsCalTunerCoefTable being set to zero. Sets to false(2) will be accepted, but will … |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.2 | ScalarcmDsCalNumTunerCoefs | read-write | current | Controls and reflects the number of tuner coefficients per downstream frequency in the cmDsCalTunerCoefTable. Note that the total number of entries in this tab… |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.3 | TablecmDsCalTunerCoefTable | not-accessible | current | A list of tuner coeffiencents to be used when calculating downstream power for this device. |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.3.1 | RowcmDsCalTunerCoefEntry | not-accessible | current | An entry defining a tuner coefficient for a given frequency at the given index for this device. |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.3.1.1 | ColumncmDsCalTunerCoefIndex | not-accessible | current | Identifies the instance of this tuner coefficient. |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.3.1.2 | ColumncmDsCalTunerCoefFrequency | read-only | current | The downstream frequency at which this instance of cmDsCalTunerCoefValue applies. This read-only object is provided here for convenience. Value is identical to… |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.3.1.3 | ColumncmDsCalTunerCoefValue | read-write | current | The value of this tuner coefficient multiplied by one million. For example, a tuner coefficient value of 0.218369 would be represented as 218369. This gives a … |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.3.1.4 | ColumncmDsCalTunerCoefCopyFrom | read-write | current | Setting this object to the value of the first element of an index of a row in this table will cause all coefficients for this frequency to be copied from the c… |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.4 | ScalarcmDsCalZeroIFCoefs | read-write | current | Setting this object to true(1) will result in all writable objects in the cmDsCalIFCoefTable being set to zero. Sets to false(2) will be accepted, but will not… |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.5 | ScalarcmDsCalNumIFCoefs | read-write | current | Controls and reflects the number of IF coefficients per downstream frequency in the cmDsCalIFCoefTable. Note that the total number of entries in this table wil… |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.6 | TablecmDsCalIFCoefTable | not-accessible | current | A list of intermediate frequency coeffiencents to be used when calculating downstream power for this device. |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.6.1 | RowcmDsCalIFCoefEntry | not-accessible | current | An entry defining an IF coefficient for a given frequency at the given index for this device. |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.6.1.1 | ColumncmDsCalIFCoefIndex | not-accessible | current | Identifies the instance of this IF coefficient. |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.6.1.2 | ColumncmDsCalIFCoefFrequency | read-only | current | The downstream frequency at which this instance of cmDsCalIFCoefValue applies. This read-only object is provided here for convenience. Value is identical to th… |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.6.1.3 | ColumncmDsCalIFCoefValue | read-write | current | The value of this IF coefficient multiplied by one hundred thousand. For example, an IF coefficent value of -2662.94 would be represented as -266294000. This g… |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.6.1.4 | ColumncmDsCalIFCoefCopyFrom | read-write | current | Setting this object to the value of the first element of an index of a row in this table will cause all coefficients for this frequency to be copied from the c… |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.7 | ScalarcmDsCalZeroFineCoefs | read-write | current | Setting this object to true(1) will result in all writable objects in the cmDsCalFineCoefTable being set to zero. Sets to false(2) will be accepted, but will n… |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.8 | ScalarcmDsCalNumFineCoefs | read-write | current | Controls and reflects the number of Fine coefficients per downstream frequency in the cmDsCalFineCoefTable. Note that the total number of entries in this table… |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.9 | TablecmDsCalFineCoefTable | not-accessible | current | A list of Fine coeffiencents to be used when calculating downstream power for this device. |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.9.1 | RowcmDsCalFineCoefEntry | not-accessible | current | An entry defining a Fine coefficient for a given frequency at the given index for this device. |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.9.1.1 | ColumncmDsCalFineCoefIndex | not-accessible | current | Identifies the instance of this Fine coefficient. |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.9.1.2 | ColumncmDsCalFineCoefFrequency | read-only | current | The downstream frequency at which this instance of cmDsCalFineCoefValue applies. This read-only object is provided here for convenience. Value is identical to … |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.9.1.3 | ColumncmDsCalFineCoefValue | read-write | current | The value of this fine coefficient multiplied by one million. For example, a fine coefficent value of 36.5494 would be represented as 36549400. This gives an e… |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.9.1.4 | ColumncmDsCalFineCoefCopyFrom | read-write | current | Setting this object to the value of the first element of an index of a row in this table will cause all coefficients for this frequency to be copied from the c… |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.10 | ScalarcmDsCalZeroEqCoefs | read-write | current | Setting this object to true(1) will result in all writable objects in the cmDsCalEqualizerCoefTable being set to zero. Sets to false(2) will be accepted, but w… |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.11 | ScalarcmDsCalNumEqCoefs | read-write | current | Controls and reflects the number of equalizer coefficients per downstream frequency in the cmDsCalEqualizerCoefTable. Note that the total number of entries in … |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.12 | TablecmDsCalEqCoefTable | not-accessible | current | A list of equalizer coeffiencents to be used when calculating downstream power for this device. |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.12.1 | RowcmDsCalEqCoefEntry | not-accessible | current | An entry defining a equalizer coefficient for a given frequency at the given index for this device. |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.12.1.1 | ColumncmDsCalEqCoefIndex | not-accessible | current | Identifies the instance of this equalizer coefficient. |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.12.1.2 | ColumncmDsCalEqCoefFrequency | read-only | current | The downstream frequency at which this instance of cmDsCalEqCoefValue applies. This read-only object is provided here for convenience. Value is identical to th… |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.12.1.3 | ColumncmDsCalEqCoefValue | read-write | current | The value of this equalizer coefficient multiplied by one hundred thousand. For example, an equalizer coefficent value of 4287.95 would be represented as 42879… |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.12.1.4 | ColumncmDsCalEqCoefCopyFrom | read-write | current | Setting this object to the value of the first element of an index of a row in this table will cause all coefficients for this frequency to be copied from the c… |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.13 | ScalarcmDsCalNumLDAIxReads | read-write | current | Sets the number of times the LDAIx registers will be read before doing the power calculations. It will average the register values. |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.14 | ScalarcmDsCalLDAIxReadInterval | read-write | current | Sets the time (in milliseconds) between each read of the LDAIx registers. |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.15 | ScalarcmDsCalTunerStep | read-write | current | Sets the step size (in dBmV) that was used when sampling the tuner table. This influences how the data is interpolated when calculating the tuner gain part of … |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.16 | ScalarcmDsCalMasterPowerOffset | read-write | current | Sets the master offset power value (in dBmV) for the modem. Each frequency band in the table has an offset power adjustment that is applied to this value when … |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.17 | ScalarcmDsCalCharacterizeNow | read-write | current | When set to true(1), the CM will execute its DS characterization routine using the frequency specified by cmDsCalFrequency, and the modulation type specified b… |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.18 | ScalarcmDsCalNormalLDAIT | read-only | current | Shows the contents of the LDAIT register after executing the 'normal' portion of the CM DS characterization routine. |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.19 | ScalarcmDsCalNormalLDAIF | read-only | current | Shows the contents of the LDAIF register after executing the 'normal' portion of the CM DS characterization routine. |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.20 | ScalarcmDsCalNormalLDAII | read-only | current | Shows the contents of the LDAII register after executing the 'normal' portion of the CM DS characterization routine. |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.21 | ScalarcmDsCalFrozenLDAIT | read-only | current | Shows the contents of the LDAIT register after executing the 'frozen' portion of the CM DS characterization routine. |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.22 | ScalarcmDsCalFrozenLDAIF | read-only | current | Shows the contents of the LDAIF register after executing the 'frozen' portion of the CM DS characterization routine. |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.23 | ScalarcmDsCalFrozenLDAII | read-only | current | Shows the contents of the LDAII register after executing the 'frozen' portion of the CM DS characterization routine. |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.24 | ScalarcmDsCalFGainTap | read-only | current | Shows the value of the equalizer main tap after executing the F-Gain portion of the CM DS characterization routine. |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.25 | ScalarcmDsCalTGainTap | read-only | current | Shows the value of the equalizer main tap after executing the T-Gain portion of the CM DS characterization routine. |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.26 | ScalarcmDsCalIGainTap | read-only | current | Shows the value of the equalizer main tap after executing the I-Gain portion of the CM DS characterization routine. |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.27 | ScalarcmDsCalFrequencyError | read-only | current | Reports the amount of frequency error in the downstream signal. |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.28 | ScalarcmDsCalTunerCoefTablePopulate | read-write | current | When set to true(1), the downstream tuner coefficient data will be loaded into the cmDsCalTunerCoefTable. If the table is already populated, it will be flushed… |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.29 | ScalarcmDsCalIFCoefTablePopulate | read-write | current | When set to true(1), the downstream intermediate frequency coefficient data will be loaded into the cmDsCalIFCoefTable. If the table is already populated, it w… |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.30 | ScalarcmDsCalFineCoefTablePopulate | read-write | current | When set to true(1), the downstream fine coefficient data will be loaded into the cmDsCalFineCoefTable. If the table is already populated, it will be flushed a… |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.2.31 | ScalarcmDsCalEqCoefTablePopulate | read-write | current | When set to true(1), the downstream equalizer coefficient data will be loaded into the cmDsCalEqCoefTable. If the table is already populated, it will be flushe… |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.3 | NodecmEngrUpstreamCalibration | |||
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.3.1 | ScalarcmUsCalControlStartPower | read-write | current | Controls and reflects the starting power used in the cmUsCalControlTable. Changing this value will result in the size of the cmUsCalControlTable being altered. |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.3.2 | ScalarcmUsCalControlEndPower | read-write | current | Controls and reflects the ending power used in the cmUsCalControlTable. Changing this value will result in the size of the cmUsCalControlTable being altered. |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.3.3 | ScalarcmUsCalControlResolution | read-write | current | Controls and reflects the resolution used in the cmUsCalControlTable. Changing this value will result in the size of the cmUsCalControlTable being altered. |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.3.4 | ScalarcmUsCalZeroControl | read-write | current | If set to true(1), all instances of cmUsCalControlAmpGain and cmUsCalControlDacAtten in the cmUsCalControlTable will be set to a value of zero. When read, alwa… |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.3.5 | TablecmUsCalControlTable | not-accessible | current | A list of control values to be used when calculating upstream power for this device. |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.3.5.1 | RowcmUsCalControlEntry | not-accessible | current | An entry defining the control values for a given power at the given index for this device. |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.3.5.1.1 | ColumncmUsCalControlIndex | not-accessible | current | Identifies the instance of this pair of control values. |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.3.5.1.2 | ColumncmUsCalControlPower | read-only | current | Indicates the upstream power level which is expected when the amp gain and DAC attenuation are programmed as indicated in this entry. This value is read-only, … |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.3.5.1.3 | ColumncmUsCalControlAmpGain | read-write | current | Controls and reflects the amplifier gain setting used to produce an output power equal to the value of this entry's instance of cmUsCalControlPower. |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.3.5.1.4 | ColumncmUsCalControlDacAtten | read-write | current | Controls and reflects the DAC attenuation setting used to produce an output power equal to the value of this entry's instance of cmUsCalControlPower. |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.3.6 | ScalarcmUsCalOffsetStartFreq | read-write | current | Controls and reflects the starting frequency used in the cmUsCalOffsetTable. Changing this value will result in the size of the cmUsCalOffsetTable being altere… |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.3.7 | ScalarcmUsCalOffsetEndFreq | read-write | current | Controls and reflects the ending frequency used in the cmUsCalOffsetTable. Changing this value will result in the size of the cmUsCalOffsetTable being altered. |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.3.8 | ScalarcmUsCalOffsetResolution | read-write | current | Controls and reflects the resolution used in the cmUsCalOffsetTable. Changing this value will result in the size of the cmUsCalControlTable being altered. |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.3.9 | ScalarcmUsCalBoardType | read-write | current | Sets the board revision that the tables have been calibrated for; it helps the app warn the user about incorrect configurations (loading a table that has been … |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.3.10 | ScalarcmUsCalAmpType | read-write | current | Sets the upstream amp that the tables have been calibrated for; it helps the app warn the user about incorrect configurations. These values are the same as tho… |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.3.11 | ScalarcmUsCalAmpGain | read-write | current | Controls and reflects the current value of the amplifier gain, an 8 bit hardware value. |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.3.12 | ScalarcmUsCalDacAtten | read-write | current | Controls and reflects the current value of the DAC attenuator, an 8 bit hardware value. |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.3.13 | ScalarcmUsCalTransmitNow | read-write | current | When set to cw(1), the device will begin transmitting upstream in CW mode using the specified amp gain and DAC attenuation values. When set to bits23(2), the d… |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.3.14 | ScalarcmUsCalControlTablePopulate | read-write | current | When set to true(1), the upstream calibration control data will be loaded into the cmUsCalControlTable. If the table is already populated, it will be flushed a… |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.4 | NodecmEngrHardware | |||
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.4.1 | ScalarcmHwDSAGI | read-write | current | IF AGC Control |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.4.2 | ScalarcmHwDSAGT | read-write | current | RF (Tuner) AGC Control |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.4.3 | ScalarcmHwSTPGA1 | read-write | current | IF PGA Control |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.4.4 | ScalarcmHwSTABW | read-write | current | AGC Bandwidth Control |
| 1.3.6.1.4.1.4413.2.99.1.1.3.2.4.5 | ScalarcmHwSTABW2 | read-write | current | AGC Bandwidth Control 2 |