BRCM-CM-MGMT-MIB
43 objects
Broadcom proprietary MIB for runtime management of cablemodem devices.
Imported Objects
| BRCM-CABLEDATA-MGMT-MIB | cableDataMgmtMIBObjects |
| DOCS-CABLE-DEVICE-MIB | docsDevEvId docsDevEvLevel docsDevEvText |
| DOCS-IF-MIB | docsIfCmCmtsAddress docsIfCmStatusDocsisOperMode docsIfCmStatusModulationType docsIfDocsisBaseCapability |
| IANAifType-MIB | IANAifType |
| IF-MIB | ifIndex ifPhysAddress |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus StorageType TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4413.2.2.2.1.2 | IdentitycablemodemMgmt | Broadcom proprietary MIB for runtime management of cablemodem devices. | ||
| 1.3.6.1.4.1.4413.2.2.2.1.2.1 | NodecmMgmtBase | |||
| 1.3.6.1.4.1.4413.2.2.2.1.2.1.1 | ScalarcmNumLLCFiltersSupported | read-only | current | Indicates the number of entries in the docsDevFilterLLCTable which can be supported on this particular device under current operating conditions. Note that thi… |
| 1.3.6.1.4.1.4413.2.2.2.1.2.1.2 | ScalarcmNumIpFiltersSupported | read-only | current | Indicates the number of entries in the docsDevFilterIpTable which can be supported on this particular device under current operating conditions. Note that this… |
| 1.3.6.1.4.1.4413.2.2.2.1.2.1.3 | ScalarcmMiniFirewallEnable | read-write | current | Specifies whether the CM mini-firewall will be enabled, provided the mini-firewall feature is supported. If the feature is not supported, this object will alwa… |
| 1.3.6.1.4.1.4413.2.2.2.1.2.1.4 | ScalarcmDsdExtendedRetryEnable | read-write | current | Specifies the behavior of the CM with regards to retrying DSD requests when no reply is received. If set to true(1), the CM will continue to retry the request … |
| 1.3.6.1.4.1.4413.2.2.2.1.2.1.5 | ScalarcmCpeInterface | read-write | current | For designs which are not capable of supporting multiple CPE interfaces simultaneously, this object specifies the interface which will be used as a CPE interfa… |
| 1.3.6.1.4.1.4413.2.2.2.1.2.1.6 | ScalarcmResetFactoryDefaults | read-write | current | Setting this object to true(1) will cause the device to reset all non-volatile settings to their factory default state, and the device to be rebooted. Note tha… |
| 1.3.6.1.4.1.4413.2.2.2.1.2.1.7 | ScalarcmTodRefreshInterval | read-write | current | This object controls the length of time between periodic updates of system time by way of a Time of Day (ToD) refresh. If set to 0, time of day will not be ref… |
| 1.3.6.1.4.1.4413.2.2.2.1.2.1.8 | TablecmDownstreamChannelInfoTable | not-accessible | current | A table describing the characteristics of each downstream channel. An entry exists in this table for each entry in the ifTable with an ifType value of docsCabl… |
| 1.3.6.1.4.1.4413.2.2.2.1.2.1.8.1 | RowcmDownstreamChannelInfoEntry | not-accessible | current | An entry describing the attributes of a single downstream channel. |
| 1.3.6.1.4.1.4413.2.2.2.1.2.1.8.1.1 | ColumncmDsChanInfoCodewordErrorRate | read-only | current | Downstream Codeword Error Rate. (Errored Codewords / Total CodeWords) |
| 1.3.6.1.4.1.4413.2.2.2.1.2.1.8.1.2 | ColumncmDsChanInfoMeanSquareError | read-only | current | Downstream Mean Square Error |
| 1.3.6.1.4.1.4413.2.2.2.1.2.1.9 | ScalarcmIpProvisioningMode | read-write | current | The value of this object determines the mode used by the CM for IP provisioning. If set to the default value of mdd(0), the CM will comply with the DOCSIS 3.0 … |
| 1.3.6.1.4.1.4413.2.2.2.1.2.1.10 | TablecmServiceQueueTable | not-accessible | current | This table describes attributes of each upstream service queue on a CM. |
| 1.3.6.1.4.1.4413.2.2.2.1.2.1.10.1 | RowcmServiceQueueEntry | not-accessible | current | Describes the attributes of a single service queue. An entry exists in this table exists for each service queue. The ifIndex refers to the entry in the ifTable… |
| 1.3.6.1.4.1.4413.2.2.2.1.2.1.10.1.1 | ColumncmServiceQueueId | not-accessible | current | Identifies a service queue for upstream bandwidth. This value is equal to the SID for this service queue. |
| 1.3.6.1.4.1.4413.2.2.2.1.2.1.10.1.2 | ColumncmServiceQueueMaxQueueDepth | read-only | current | Indicates the maximum number of packets which can be enqueued on this service queue. |
| 1.3.6.1.4.1.4413.2.2.2.1.2.1.10.1.3 | ColumncmServiceQueueCurrentQueueDepth | read-only | current | Indicates the number of packets currently enqueued on this service queue. |
| 1.3.6.1.4.1.4413.2.2.2.1.2.2 | NodecmFilter | |||
| 1.3.6.1.4.1.4413.2.2.2.1.2.2.1 | TablecmHostIpFilterTable | not-accessible | current | The table of IP filters to be applied to traffic originating from or destined to this device. The fields in this table are loosely based on a subset of the fie… |
| 1.3.6.1.4.1.4413.2.2.2.1.2.2.1.1 | RowcmHostIpFilterEntry | not-accessible | current | An instance of an IP filter. Entries in the cmHostIpFilterTable are created and deleted using the cmHostIpFilterStatus object. Each filter describes a set of c… |
| 1.3.6.1.4.1.4413.2.2.2.1.2.2.1.1.1 | ColumncmHostIpFilterIndex | not-accessible | current | Identifies the instance number of this conceptual row. |
| 1.3.6.1.4.1.4413.2.2.2.1.2.2.1.1.2 | ColumncmHostIpFilterStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances … |
| 1.3.6.1.4.1.4413.2.2.2.1.2.2.1.1.3 | ColumncmHostIpFilterStorageType | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.4.1.4413.2.2.2.1.2.2.1.1.4 | ColumncmHostIpFilterMatches | read-only | current | Counts the number of times this filter was matched. |
| 1.3.6.1.4.1.4413.2.2.2.1.2.2.1.1.5 | ColumncmHostIpFilterInterfaces | read-create | current | Identifies the interfaces to which this filter applies. |
| 1.3.6.1.4.1.4413.2.2.2.1.2.2.1.1.6 | ColumncmHostIpFilterDirection | read-create | current | Determines whether the filter is applied to inbound(1) traffic, outbound(2) traffic, or traffic in both(3) directions. |
| 1.3.6.1.4.1.4413.2.2.2.1.2.2.1.1.7 | ColumncmHostIpFilterDestPortLow | read-create | current | The inclusive lower bound of the transport-layer destination port range that is to be matched. |
| 1.3.6.1.4.1.4413.2.2.2.1.2.2.1.1.8 | ColumncmHostIpFilterDestPortHigh | read-create | current | The inclusive upper bound of the transport-layer destination port range that is to be matched. |
| 1.3.6.1.4.1.4413.2.2.2.1.2.98 | NodecmEmbeddedDevices | |||
| 1.3.6.1.4.1.4413.2.2.2.1.2.99 | NodecmNotification | |||
| 1.3.6.1.4.1.4413.2.2.2.1.2.99.1 | NodecmNotificationBase | |||
| 1.3.6.1.4.1.4413.2.2.2.1.2.99.1.1 | NotificationcmDocsDevEventTrap | current | A notification with the standard DOCSIS event log variable bindings. This notification may be used for vendor-specific events which do not have a suitable noti… | |
| 1.3.6.1.4.1.4413.2.2.2.1.2.99.3 | NodecmNotificationDocsis30 | |||
| 1.3.6.1.4.1.4413.2.2.2.1.2.99.3.1 | NotificationcmMDDTimeoutTrap | current | An event to report that no MDDs are being received on one or more of the secondary downstream channels. | |
| 1.3.6.1.4.1.4413.2.2.2.1.2.100 | NodecmConformance | |||
| 1.3.6.1.4.1.4413.2.2.2.1.2.100.1 | NodecmCompliances | |||
| 1.3.6.1.4.1.4413.2.2.2.1.2.100.1.1 | CompliancecmCompliance | current | The compliance statement for cablemodem devices. | |
| 1.3.6.1.4.1.4413.2.2.2.1.2.100.2 | NodecmGroups | |||
| 1.3.6.1.4.1.4413.2.2.2.1.2.100.2.1 | GroupcmBaseGroup | current | A set of objects supported by all agents which implement this MIB. | |
| 1.3.6.1.4.1.4413.2.2.2.1.2.100.2.2 | GroupcmFilterGroup | current | A set of objects supported by agents which support CM extended filtering as described by this MIB. | |
| 1.3.6.1.4.1.4413.2.2.2.1.2.100.2.99 | GroupcmNotificationGroup | current | CM notifications |