BWM-MIB
709 objects
No module-level DESCRIPTION found.
Imported Objects
| GENERIC-MIB | DpsSessionType |
| IPV6-TC | Ipv6Address |
| RADWARE-MIB | FeatureStatus rndErrorDesc rndErrorSeverity RowStatus rsBWM TruthValue |
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises Gauge IpAddress NetworkAddress |
| RFC1213-MIB | DisplayString ipAddrEntry |
| SNMPv2-SMI | Integer32 |
| SNMPv2-TC | MacAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.89.35.1.60.1 | NodersBWMPacketBlocked | This trap is sent to inform the user about blocked packets. | ||
| 1.3.6.1.4.1.89.35.1.60.1 | TablersBWMRulesTable | not-accessible | mandatory | Table containing the list of rules for classifer data base, these rules can be used to classify packets for bandwidth management, facs etc... |
| 1.3.6.1.4.1.89.35.1.60.1.1 | RowrsBWMRulesEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.1.1.1 | ColumnrsBWMRulesIndex | read-write | mandatory | This variable indicates the administrative index of a line it determines the order of the rules. |
| 1.3.6.1.4.1.89.35.1.60.1.1.2 | ColumnrsBWMRulesName | read-only | mandatory | The Name for the Rule must be unique. |
| 1.3.6.1.4.1.89.35.1.60.1.1.3 | ColumnrsBWMRulesDestination | read-write | mandatory | The destination address / range of address for the packet, the name is defined in the Objects table or can be an IP address. |
| 1.3.6.1.4.1.89.35.1.60.1.1.4 | ColumnrsBWMRulesSource | read-write | mandatory | The source address / range of address for the packet, the name is defined in the Objects table or can be an IP address. |
| 1.3.6.1.4.1.89.35.1.60.1.1.5 | ColumnrsBWMRulesStatus | read-write | mandatory | This variable indicates the administrative status of this entry. Used to delete an entry of this table. |
| 1.3.6.1.4.1.89.35.1.60.1.1.6 | ColumnrsBWMRulesAction | read-write | mandatory | This variable indicates the action that the classifier / service must take on this entry. |
| 1.3.6.1.4.1.89.35.1.60.1.1.7 | ColumnrsBWMRulesDirection | read-write | mandatory | This variable indicates the direction of the incoming packet. |
| 1.3.6.1.4.1.89.35.1.60.1.1.8 | ColumnrsBWMRulesPriority | read-write | mandatory | This variable indicates the priority for this entry. |
| 1.3.6.1.4.1.89.35.1.60.1.1.9 | ColumnrsBWMRulesPhysicalPort | read-write | mandatory | This variable indicates the port from which the packet arrived. (obsolete field) |
| 1.3.6.1.4.1.89.35.1.60.1.1.10 | ColumnrsBWMRulesType | read-write | mandatory | This variable indicates the type of rules (services) . |
| 1.3.6.1.4.1.89.35.1.60.1.1.11 | ColumnrsBWMRulesDescription | read-write | mandatory | Description. |
| 1.3.6.1.4.1.89.35.1.60.1.1.12 | ColumnrsBWMRulesGuaranteedBW | read-write | mandatory | Bandwidth allocated for a certain rule. |
| 1.3.6.1.4.1.89.35.1.60.1.1.13 | ColumnrsBWMRulesPolicyType | read-write | mandatory | The type of policy - i.e. if this is a filter, group or policy. |
| 1.3.6.1.4.1.89.35.1.60.1.1.14 | ColumnrsBWMRulesPolicy | read-write | mandatory | The name for the filter policy for the rule. |
| 1.3.6.1.4.1.89.35.1.60.1.1.15 | ColumnrsBWMRulesOperationalStatus | read-write | mandatory | This variable indicates if the rule is active or inactive. The active rule table contains only active rules. |
| 1.3.6.1.4.1.89.35.1.60.1.1.16 | ColumnrsBWMRulesDSCPMarking | read-write | mandatory | OLD parameter. no longer in use (moved to extensions). |
| 1.3.6.1.4.1.89.35.1.60.1.1.17 | ColumnrsBWMRulesReportBlockedPackets | read-write | mandatory | This variable indicates if blocked packets are be reported. |
| 1.3.6.1.4.1.89.35.1.60.1.1.18 | ColumnrsBWMRulesMaxBW | read-write | mandatory | Maximum bandwidth allocated for a certain rule.The range is 0 - 8000000.Default value (2147483647) is translated to Unlimited |
| 1.3.6.1.4.1.89.35.1.60.1.1.19 | ColumnrsBWMRulesSpecific | read-write | mandatory | This variable indicates if there is additional data to the policy. |
| 1.3.6.1.4.1.89.35.1.60.1.1.20 | ColumnrsBWMRulesPhysicalPortGroup | read-write | mandatory | The name of the physical port group for this rule. |
| 1.3.6.1.4.1.89.35.1.60.1.1.21 | ColumnrsBWMRulesVLANTagGroup | read-write | mandatory | The name of the VLAN tag group for this rule. |
| 1.3.6.1.4.1.89.35.1.60.1.1.22 | ColumnrsBWMRulesTrafficIdentification | read-write | mandatory | Not In Use. |
| 1.3.6.1.4.1.89.35.1.60.1.1.23 | ColumnrsBWMRulesTrafficFlowMaxBW | read-write | mandatory | Not In Use |
| 1.3.6.1.4.1.89.35.1.60.1.1.24 | ColumnrsBWMRulesMaxConcurrentSessions | read-write | mandatory | Not In Use |
| 1.3.6.1.4.1.89.35.1.60.1.1.25 | ColumnrsBWMRulesTrafficIDCookieField | read-write | mandatory | Not In Use |
| 1.3.6.1.4.1.89.35.1.60.1.1.26 | ColumnrsBWMRulesPolicyGroup | read-write | mandatory | Group the policies for bandwidth sharing. |
| 1.3.6.1.4.1.89.35.1.60.1.1.27 | ColumnrsBWMRulesRadiusRule | read-write | mandatory | The name of the radius relevant this session belongs to. This field is relevant only for cid. Radius' rules names can be found in the Radius Rules Table |
| 1.3.6.1.4.1.89.35.1.60.2 | TablersBWMRulesIPObjectTable | not-accessible | mandatory | Table containing the grouping for ranges. |
| 1.3.6.1.4.1.89.35.1.60.2 | NodersBWMTrafficFlowBWTablesFull | This trap is sent to inform the user about one of the tables for BW per traffic flow support being full. | ||
| 1.3.6.1.4.1.89.35.1.60.2.1 | RowrsBWMRulesIPObjectEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.2.1.1 | ColumnrsBWMRulesIPObjectName | read-only | mandatory | The Name for the IP Object Rule, must be unique. |
| 1.3.6.1.4.1.89.35.1.60.2.1.2 | ColumnrsBWMRulesIPObjectSubIndex | read-only | mandatory | SubIndex. |
| 1.3.6.1.4.1.89.35.1.60.2.1.3 | ColumnrsBWMRulesIPObjectAddress | read-write | mandatory | IP address |
| 1.3.6.1.4.1.89.35.1.60.2.1.4 | ColumnrsBWMRulesIPObjectMask | read-write | mandatory | IP address mask. |
| 1.3.6.1.4.1.89.35.1.60.2.1.5 | ColumnrsBWMRulesIPObjectFromIP | read-write | mandatory | The from IP Address of the range. |
| 1.3.6.1.4.1.89.35.1.60.2.1.6 | ColumnrsBWMRulesIPObjectToIP | read-write | mandatory | The to IP Address of the range. |
| 1.3.6.1.4.1.89.35.1.60.2.1.7 | ColumnrsBWMRulesIPObjectMode | read-write | mandatory | This variable indicates the mode of the entry. This is either a range or an IP address and mask. |
| 1.3.6.1.4.1.89.35.1.60.2.1.8 | ColumnrsBWMRulesIPObjectStatus | read-write | mandatory | This variable indicates the administrative status of this entry. Used to delete an entry of this table. |
| 1.3.6.1.4.1.89.35.1.60.3 | ScalarrsBWMCBQMode | read-write | mandatory | CBQ Mode. |
| 1.3.6.1.4.1.89.35.1.60.3 | NodersBWMFilterCreationFailed | This trap is sent to inform the user that BWM filter creation failed. | ||
| 1.3.6.1.4.1.89.35.1.60.4 | ScalarrsBWMActualQueueSize | read-only | mandatory | The current size of the queue. |
| 1.3.6.1.4.1.89.35.1.60.4 | NodersBWMNoDefaultGatewayForClassification | This trap is sent to inform the user that default gateway is needed for classification but is not configured. | ||
| 1.3.6.1.4.1.89.35.1.60.5 | NodersBWMAttackReportTrap | This trap is sent to inform the user of an attack detected by the BWM. | ||
| 1.3.6.1.4.1.89.35.1.60.5 | ScalarrsBWMAverageQueueSize | read-only | mandatory | The current average queue size. |
| 1.3.6.1.4.1.89.35.1.60.6 | ScalarrsBWMQueueRedDropped | read-only | mandatory | The current red dropped packets. |
| 1.3.6.1.4.1.89.35.1.60.7 | TablersBWMPriorityTable | not-accessible | mandatory | The table for reading the packets sent via each priority |
| 1.3.6.1.4.1.89.35.1.60.7.1 | RowrsBWMPriorityEntry | not-accessible | mandatory | The row definition for the priority table |
| 1.3.6.1.4.1.89.35.1.60.7.1.1 | ColumnrsBWMPriority | read-only | mandatory | The priority |
| 1.3.6.1.4.1.89.35.1.60.7.1.2 | ColumnrsBWMPacketsSent | read-only | mandatory | The number of packets sent via this priority |
| 1.3.6.1.4.1.89.35.1.60.8 | ScalarrsBWMRedMode | read-write | mandatory | The RED algorithm mode |
| 1.3.6.1.4.1.89.35.1.60.9 | TablersBWMCurrentRulesTable | not-accessible | mandatory | Table containing the list of rules for classifer data base, these rules can be used to classify packets for bandwidth management, facs etc... |
| 1.3.6.1.4.1.89.35.1.60.9.1 | RowrsBWMCurrentRulesEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.9.1.1 | ColumnrsBWMCurrentRulesIndex | read-only | mandatory | This variable indicates the administrative index of a line it determine the order of the rules. |
| 1.3.6.1.4.1.89.35.1.60.9.1.2 | ColumnrsBWMCurrentRulesName | read-only | mandatory | The Name for the Rule must be unique. |
| 1.3.6.1.4.1.89.35.1.60.9.1.3 | ColumnrsBWMCurrentRulesDestination | read-only | mandatory | The destination address / range of address for the packet, the name is defined in the Objects table or can be an IP address. |
| 1.3.6.1.4.1.89.35.1.60.9.1.4 | ColumnrsBWMCurrentRulesSource | read-only | mandatory | The source address / range of address for the packet, the name is defined in the Objects table or can be an IP address. |
| 1.3.6.1.4.1.89.35.1.60.9.1.5 | ColumnrsBWMCurrentRulesAction | read-only | mandatory | This variable indicates the action that the classifier / service must take on this entry. |
| 1.3.6.1.4.1.89.35.1.60.9.1.6 | ColumnrsBWMCurrentRulesDirection | read-only | mandatory | This variable indicates the direction of the incoming packet. |
| 1.3.6.1.4.1.89.35.1.60.9.1.7 | ColumnrsBWMCurrentRulesPriority | read-only | mandatory | This variable indicates the priority for this entry. |
| 1.3.6.1.4.1.89.35.1.60.9.1.8 | ColumnrsBWMCurrentRulesPhysicalPort | read-only | mandatory | This variable indicates the port from which the packet arrived. |
| 1.3.6.1.4.1.89.35.1.60.9.1.9 | ColumnrsBWMCurrentRulesType | read-only | mandatory | This variable indicates the type of rules (services) . |
| 1.3.6.1.4.1.89.35.1.60.9.1.10 | ColumnrsBWMCurrentRulesDescription | read-only | mandatory | Description. |
| 1.3.6.1.4.1.89.35.1.60.9.1.11 | ColumnrsBWMCurrentRulesGuaranteedBW | read-only | mandatory | Bandwidth allocated for a certain rule. |
| 1.3.6.1.4.1.89.35.1.60.9.1.12 | ColumnrsBWMCurrentRulesMaxBW | read-only | mandatory | Maximum bandwidth allocated for a certain rule. |
| 1.3.6.1.4.1.89.35.1.60.9.1.13 | ColumnrsBWMCurrentRulesPolicyType | read-only | mandatory | The type of policy - i.e. if this is a filter, group or policy. |
| 1.3.6.1.4.1.89.35.1.60.9.1.14 | ColumnrsBWMCurrentRulesPolicy | read-only | mandatory | The name for the filter policy for the rule. |
| 1.3.6.1.4.1.89.35.1.60.9.1.15 | ColumnrsBWMCurrentRulesDSCPMarking | read-only | mandatory | OLD parameter. no longer in use (moved to extensions). |
| 1.3.6.1.4.1.89.35.1.60.9.1.16 | ColumnrsBWMCurrentRulesReportBlockedPackets | read-only | mandatory | This variable indicates if blocked packets are be reported. |
| 1.3.6.1.4.1.89.35.1.60.9.1.17 | ColumnrsBWMCurrentRulesSpecific | read-only | mandatory | This variable indicates if there is additional data to the policy. |
| 1.3.6.1.4.1.89.35.1.60.9.1.18 | ColumnrsBWMCurrentRulesPhysicalPortGroup | read-only | mandatory | The name of the physical port group for this rule. |
| 1.3.6.1.4.1.89.35.1.60.9.1.19 | ColumnrsBWMCurrentRulesVLANTagGroup | read-only | mandatory | The name of the VLAN tag group for this rule. |
| 1.3.6.1.4.1.89.35.1.60.9.1.20 | ColumnrsBWMCurrentRulesTrafficIdentification | read-only | mandatory | Not In Use. |
| 1.3.6.1.4.1.89.35.1.60.9.1.21 | ColumnrsBWMCurrentRulesTrafficFlowMaxBW | read-only | mandatory | Not In Use. |
| 1.3.6.1.4.1.89.35.1.60.9.1.22 | ColumnrsBWMCurrentRulesMaxConcurrentSessions | read-only | mandatory | Not In Use. |
| 1.3.6.1.4.1.89.35.1.60.9.1.23 | ColumnrsBWMCurrentRulesTrafficIDCookieField | read-only | mandatory | Not In Use. |
| 1.3.6.1.4.1.89.35.1.60.9.1.24 | ColumnrsBWMCurrentRulesPolicyGroup | read-only | mandatory | Group the policies for bandwidth sharing. |
| 1.3.6.1.4.1.89.35.1.60.9.1.25 | ColumnrsBWMCurrentRulesRadiusRule | read-write | mandatory | The name of the radius relevant this session belongs to. This field is relevant only for cid. Radius' rules names can be found in the Radius Rules Table |
| 1.3.6.1.4.1.89.35.1.60.10 | TablersBWMCurrentRulesIPObjectTable | not-accessible | mandatory | Table containing the grouping for ranges. |
| 1.3.6.1.4.1.89.35.1.60.10.1 | RowrsBWMCurrentRulesIPObjectEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.10.1.1 | ColumnrsBWMCurrentRulesIPObjectName | read-only | mandatory | The Name for the IP Object Rule, must be unique. |
| 1.3.6.1.4.1.89.35.1.60.10.1.2 | ColumnrsBWMCurrentRulesIPObjectSubIndex | read-only | mandatory | SubIndex. |
| 1.3.6.1.4.1.89.35.1.60.10.1.3 | ColumnrsBWMCurrentRulesIPObjectAddress | read-only | mandatory | IP address |
| 1.3.6.1.4.1.89.35.1.60.10.1.4 | ColumnrsBWMCurrentRulesIPObjectMask | read-only | mandatory | IP address mask. |
| 1.3.6.1.4.1.89.35.1.60.10.1.5 | ColumnrsBWMCurrentRulesIPObjectFromIP | read-only | mandatory | The from IP Address of the range. |
| 1.3.6.1.4.1.89.35.1.60.10.1.6 | ColumnrsBWMCurrentRulesIPObjectToIP | read-only | mandatory | The to IP Address of the range. |
| 1.3.6.1.4.1.89.35.1.60.10.1.7 | ColumnrsBWMCurrentRulesIPObjectMode | read-only | mandatory | This variable indicates the mode of the entry. This is either a range or an IP address and mask. |
| 1.3.6.1.4.1.89.35.1.60.11 | ScalarrsBWMClassificationMode | read-write | mandatory | The rule classifiction mode |
| 1.3.6.1.4.1.89.35.1.60.12 | ScalarrsBWMMaximumBandwidth | read-only | mandatory | The maximum output bandwidth of the device. This is in Bytes |
| 1.3.6.1.4.1.89.35.1.60.13 | ScalarrsBWMBandwidthBorrowingMode | read-write | mandatory | Whether or not rules are able to borrow bandwidth from other rules |
| 1.3.6.1.4.1.89.35.1.60.14 | ScalarrsBWMActions | read-write | mandatory | Allows the application to perform specific actions |
| 1.3.6.1.4.1.89.35.1.60.15 | TablersBWMFilterEntryTable | not-accessible | mandatory | Table containing the filters. |
| 1.3.6.1.4.1.89.35.1.60.15.1 | RowrsBWMFilterEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.15.1.1 | ColumnrsBWMFilterName | read-only | mandatory | The name of the filter object. |
| 1.3.6.1.4.1.89.35.1.60.15.1.2 | ColumnrsBWMFilterDescription | read-write | mandatory | The description of the filter. |
| 1.3.6.1.4.1.89.35.1.60.15.1.3 | ColumnrsBWMFilterProtocol | read-write | mandatory | The protocol for the filter. |
| 1.3.6.1.4.1.89.35.1.60.15.1.4 | ColumnrsBWMFilterDestinationPort | read-write | mandatory | Obsolete mib field |
| 1.3.6.1.4.1.89.35.1.60.15.1.5 | ColumnrsBWMFilterSourceFromPort | read-write | mandatory | Obsolete mib field |
| 1.3.6.1.4.1.89.35.1.60.15.1.6 | ColumnrsBWMFilterSourceToPort | read-write | mandatory | Obsolete mib field |
| 1.3.6.1.4.1.89.35.1.60.15.1.7 | ColumnrsBWMFilterOMPCOffset | read-write | mandatory | The offset of the OMPC data. |
| 1.3.6.1.4.1.89.35.1.60.15.1.8 | ColumnrsBWMFilterOMPCMask | read-write | mandatory | The mask for the OMPC object. |
| 1.3.6.1.4.1.89.35.1.60.15.1.9 | ColumnrsBWMFilterOMPCPattern | read-write | mandatory | The pattern for the OMPC data. |
| 1.3.6.1.4.1.89.35.1.60.15.1.10 | ColumnrsBWMFilterOMPCCondition | read-write | mandatory | The condition for the OMPC data check. |
| 1.3.6.1.4.1.89.35.1.60.15.1.11 | ColumnrsBWMFilterOMPCLength | read-write | mandatory | The length of the OMPC. |
| 1.3.6.1.4.1.89.35.1.60.15.1.12 | ColumnrsBWMFilterContentOffset | read-write | mandatory | The offset for the content. |
| 1.3.6.1.4.1.89.35.1.60.15.1.13 | ColumnrsBWMFilterContent | read-write | mandatory | The content to be checked. |
| 1.3.6.1.4.1.89.35.1.60.15.1.14 | ColumnrsBWMFilterContentType | read-write | mandatory | The type of content. In the case of URL only the url is checked. (No offset is used). In the case of text then the entire packet is checked. (will make use of … |
| 1.3.6.1.4.1.89.35.1.60.15.1.15 | ColumnrsBWMFilterType | read-write | mandatory | The type of object. This can be regular (user defined) or static (defined by the application). ids and idsStatic are obsolete. |
| 1.3.6.1.4.1.89.35.1.60.15.1.16 | ColumnrsBWMFilterStatus | read-write | mandatory | The status of the object. |
| 1.3.6.1.4.1.89.35.1.60.15.1.17 | ColumnrsBWMFilterContentEnd | read-write | mandatory | End of search data. |
| 1.3.6.1.4.1.89.35.1.60.15.1.18 | ColumnrsBWMFilterContentData | read-write | mandatory | Additional content data, used for header type entries. |
| 1.3.6.1.4.1.89.35.1.60.15.1.19 | ColumnrsBWMFilterContentCoding | read-write | mandatory | The type of content coding that is used. |
| 1.3.6.1.4.1.89.35.1.60.15.1.20 | ColumnrsBWMFilterContentDataCoding | read-write | mandatory | The type of content data coding that is used. |
| 1.3.6.1.4.1.89.35.1.60.15.1.21 | ColumnrsBWMFilterOMPCOffsetBase | read-write | mandatory | The base of filter OMPC offset. |
| 1.3.6.1.4.1.89.35.1.60.15.1.22 | ColumnrsBWMFilterDestinationMaxPort | read-write | mandatory | Obsolete mib field. |
| 1.3.6.1.4.1.89.35.1.60.15.1.23 | ColumnrsBWMFilterSourceAppPortGroup | read-write | mandatory | The source port group. |
| 1.3.6.1.4.1.89.35.1.60.15.1.24 | ColumnrsBWMFilterDestinationAppPortGroup | read-write | mandatory | The destination port group. |
| 1.3.6.1.4.1.89.35.1.60.15.1.25 | ColumnrsBWMFilterSessionType | read-write | mandatory | The type of session for classification of dynamic protocols sessions. |
| 1.3.6.1.4.1.89.35.1.60.15.1.26 | ColumnrsBWMFilterSessionTypeDirection | read-write | mandatory | The direction of the specific session type: reply or request. |
| 1.3.6.1.4.1.89.35.1.60.16 | TablersBWMCurrentFilterEntryTable | not-accessible | mandatory | Table containing the filters. |
| 1.3.6.1.4.1.89.35.1.60.16.1 | RowrsBWMCurrentFilterEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.16.1.1 | ColumnrsBWMCurrentFilterName | read-only | mandatory | The name of the filter object. |
| 1.3.6.1.4.1.89.35.1.60.16.1.2 | ColumnrsBWMCurrentFilterDescription | read-only | mandatory | The description of the filter. |
| 1.3.6.1.4.1.89.35.1.60.16.1.3 | ColumnrsBWMCurrentFilterProtocol | read-only | mandatory | The protocol for the filter. |
| 1.3.6.1.4.1.89.35.1.60.16.1.4 | ColumnrsBWMCurrentFilterDestinationPort | read-only | mandatory | The initial destination port. |
| 1.3.6.1.4.1.89.35.1.60.16.1.5 | ColumnrsBWMCurrentFilterSourceFromPort | read-only | mandatory | The starting source port. |
| 1.3.6.1.4.1.89.35.1.60.16.1.6 | ColumnrsBWMCurrentFilterSourceToPort | read-only | mandatory | The last valid source port. |
| 1.3.6.1.4.1.89.35.1.60.16.1.7 | ColumnrsBWMCurrentFilterOMPCOffset | read-only | mandatory | The offset of the OMPC data. |
| 1.3.6.1.4.1.89.35.1.60.16.1.8 | ColumnrsBWMCurrentFilterOMPCMask | read-only | mandatory | The mask for the OMPC object. |
| 1.3.6.1.4.1.89.35.1.60.16.1.9 | ColumnrsBWMCurrentFilterOMPCPattern | read-only | mandatory | The pattern for the OMPC data. |
| 1.3.6.1.4.1.89.35.1.60.16.1.10 | ColumnrsBWMCurrentFilterOMPCCondition | read-only | mandatory | The condition for the OMPC data check. |
| 1.3.6.1.4.1.89.35.1.60.16.1.11 | ColumnrsBWMCurrentFilterOMPCLength | read-only | mandatory | The length of the OMPC. |
| 1.3.6.1.4.1.89.35.1.60.16.1.12 | ColumnrsBWMCurrentFilterContentOffset | read-only | mandatory | The offset for the content. |
| 1.3.6.1.4.1.89.35.1.60.16.1.13 | ColumnrsBWMCurrentFilterContent | read-only | mandatory | The content to be checked. |
| 1.3.6.1.4.1.89.35.1.60.16.1.14 | ColumnrsBWMCurrentFilterContentType | read-only | mandatory | The type of content that is used. |
| 1.3.6.1.4.1.89.35.1.60.16.1.15 | ColumnrsBWMCurrentFilterType | read-only | mandatory | The type of object. This can be regular (user defined) or static (defined by the application). ids and idsStatic are obsolete. |
| 1.3.6.1.4.1.89.35.1.60.16.1.16 | ColumnrsBWMCurrentFilterContentEnd | read-only | mandatory | End of search data. |
| 1.3.6.1.4.1.89.35.1.60.16.1.17 | ColumnrsBWMCurrentFilterContentData | read-only | mandatory | Additional content data, used for header type entries. |
| 1.3.6.1.4.1.89.35.1.60.16.1.18 | ColumnrsBWMCurrentFilterContentCoding | read-only | mandatory | The type of content coding that is used. |
| 1.3.6.1.4.1.89.35.1.60.16.1.19 | ColumnrsBWMCurrentFilterContentDataCoding | read-only | mandatory | The type of content data coding that is used. |
| 1.3.6.1.4.1.89.35.1.60.16.1.20 | ColumnrsBWMCurrentFilterOMPCOffsetBase | read-only | mandatory | The base of filter OMPC offset. |
| 1.3.6.1.4.1.89.35.1.60.16.1.21 | ColumnrsBWMCurrentFilterDestinationMaxPort | read-only | mandatory | The Maximal destination port of the range. |
| 1.3.6.1.4.1.89.35.1.60.16.1.22 | ColumnrsBWMCurrentFilterSourceAppPortGroup | read-only | mandatory | The source port group. |
| 1.3.6.1.4.1.89.35.1.60.16.1.23 | ColumnrsBWMCurrentFilterDestinationAppPortGroup | read-only | mandatory | The destination port group. |
| 1.3.6.1.4.1.89.35.1.60.16.1.24 | ColumnrsBWMCurrentFilterSessionType | read-only | mandatory | The type of session for classification of dynamic protocols sessions. |
| 1.3.6.1.4.1.89.35.1.60.16.1.25 | ColumnrsBWMCurrentFilterSessionTypeDirection | read-only | mandatory | The type of session for classification of dynamic protocols sessions. |
| 1.3.6.1.4.1.89.35.1.60.17 | TablersBWMFilterGroupTable | not-accessible | mandatory | Table containing groups of filters. |
| 1.3.6.1.4.1.89.35.1.60.17.1 | RowrsBWMFilterGroup | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.17.1.1 | ColumnrsBWMFilterGroupName | read-only | mandatory | The name of the group entry. |
| 1.3.6.1.4.1.89.35.1.60.17.1.2 | ColumnrsBWMFilterEntryName | read-only | mandatory | The name of the filter entry in the group. |
| 1.3.6.1.4.1.89.35.1.60.17.1.3 | ColumnrsBWMFilterGroupType | read-write | mandatory | The type of object. This can be regular (user defined) or static (defined by the application). ids and idsStatic are obsolete. |
| 1.3.6.1.4.1.89.35.1.60.17.1.4 | ColumnrsBWMFilterGroupStatus | read-write | mandatory | The status of the object. |
| 1.3.6.1.4.1.89.35.1.60.18 | TablersBWMCurrentFilterGroupTable | not-accessible | mandatory | Table containing groups of filters. |
| 1.3.6.1.4.1.89.35.1.60.18.1 | RowrsBWMCurrentFilterGroup | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.18.1.1 | ColumnrsBWMCurrentFilterGroupName | read-only | mandatory | The name of the group entry. |
| 1.3.6.1.4.1.89.35.1.60.18.1.2 | ColumnrsBWMCurrentFilterEntryName | read-only | mandatory | The name of the filter entry in the group. |
| 1.3.6.1.4.1.89.35.1.60.18.1.3 | ColumnrsBWMCurrentFilterGroupType | read-only | mandatory | The type of object. This can be regular (user defined) or static (defined by the application). ids and idsStatic are obsolete. |
| 1.3.6.1.4.1.89.35.1.60.19 | TablersBWMFilterPolicyTable | not-accessible | mandatory | Table containing the set of filters and group filters - used by rule. |
| 1.3.6.1.4.1.89.35.1.60.19.1 | RowrsBWMFilterPolicyEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.19.1.1 | ColumnrsBWMFilterPolicyName | read-only | mandatory | The name of the filter policy. |
| 1.3.6.1.4.1.89.35.1.60.19.1.2 | ColumnrsBWMFilterPolicyEntryName | read-only | mandatory | The name of the filter entry. This can either be a group or a filter. The device will resolve the type - i.e. filter or group. |
| 1.3.6.1.4.1.89.35.1.60.19.1.3 | ColumnrsBWMFilterPolicyType | read-write | mandatory | Denotes the type of the filter policy. ids and idsStatic are obsolete. |
| 1.3.6.1.4.1.89.35.1.60.19.1.4 | ColumnrsBWMFilterPolicyStatus | read-write | mandatory | The status of the object. |
| 1.3.6.1.4.1.89.35.1.60.19.1.5 | ColumnrsBWMFilterPolicyEntryType | read-write | mandatory | Denotes the type of this filter in the policy. |
| 1.3.6.1.4.1.89.35.1.60.20 | TablersBWMCurrentFilterPolicyTable | not-accessible | mandatory | Table containing the current set of filters and group filters - used by rule. |
| 1.3.6.1.4.1.89.35.1.60.20.1 | RowrsBWMCurrentFilterPolicyEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.20.1.1 | ColumnrsBWMCurrentFilterPolicyName | read-only | mandatory | The name of the filter policy. |
| 1.3.6.1.4.1.89.35.1.60.20.1.2 | ColumnrsBWMCurrentFilterPolicyEntryName | read-only | mandatory | The name of the filter entry. This can either be a group or a filter. The device will resolve the type - i.e. filter or group. |
| 1.3.6.1.4.1.89.35.1.60.20.1.3 | ColumnrsBWMCurrentFilterPolicyType | read-only | mandatory | Denotes the type of the filter policy. ids and idsStatic are obsolete. |
| 1.3.6.1.4.1.89.35.1.60.20.1.4 | ColumnrsBWMCurrentFilterPolicyEntryType | read-only | mandatory | Denotes the type of this filter in the policy. |
| 1.3.6.1.4.1.89.35.1.60.21 | ScalarrsBWMApplicationClassification | read-write | mandatory | Defines the nature of the application classification. Enable entails that the client entry is classified and the rule is appended to the client table. Disable … |
| 1.3.6.1.4.1.89.35.1.60.22 | TablersBWMPortBandwidthEntryTable | not-accessible | mandatory | Table containing the bandwidth for each port. |
| 1.3.6.1.4.1.89.35.1.60.22.1 | RowrsBWMPortBandwidthEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.22.1.1 | ColumnrsBWMPortIndex | read-only | mandatory | The index of the bandwidths. |
| 1.3.6.1.4.1.89.35.1.60.22.1.2 | ColumnrsBWMPortBandwidth | read-write | mandatory | The bandwidth of the specific port. |
| 1.3.6.1.4.1.89.35.1.60.22.1.3 | ColumnrsBwmPortUsedBandwidth | read-only | mandatory | The bandwidth of the specific port. |
| 1.3.6.1.4.1.89.35.1.60.23 | NodersBWMTuning | |||
| 1.3.6.1.4.1.89.35.1.60.23.1 | NodersBWMPolicyTuning | |||
| 1.3.6.1.4.1.89.35.1.60.23.1.1 | ScalarrsBWMPolicyEntries | read-only | mandatory | Maximum number of policy entries. |
| 1.3.6.1.4.1.89.35.1.60.23.1.2 | ScalarrsBWMPolicyEntriesAfterReset | read-write | mandatory | Future maximum maximum number of policy entries. |
| 1.3.6.1.4.1.89.35.1.60.23.1.3 | ScalarrsBWMPolicyLeavesPercent | read-only | mandatory | Maximum number of policy leaves. |
| 1.3.6.1.4.1.89.35.1.60.23.1.4 | ScalarrsBWMPolicyLeavesPercentAfterReset | read-write | mandatory | Future maximum maximum number of policy leaves. |
| 1.3.6.1.4.1.89.35.1.60.23.2 | NodersBWMNetworkTuning | |||
| 1.3.6.1.4.1.89.35.1.60.23.2.1 | ScalarrsBWMNetworkEntries | read-only | mandatory | Maximum number of network entries. |
| 1.3.6.1.4.1.89.35.1.60.23.2.2 | ScalarrsBWMNetworkEntriesAfterReset | read-write | mandatory | Future maximum maximum number of network entries. |
| 1.3.6.1.4.1.89.35.1.60.23.3 | NodersBWMFilterTuning | |||
| 1.3.6.1.4.1.89.35.1.60.23.3.1 | ScalarrsBWMFilterEntries | read-only | mandatory | Maximum number of filter entries. |
| 1.3.6.1.4.1.89.35.1.60.23.3.2 | ScalarrsBWMFilterEntriesAfterReset | read-write | mandatory | Future maximum maximum number of filter entries. |
| 1.3.6.1.4.1.89.35.1.60.23.4 | NodersBWMAdvancedTuning | |||
| 1.3.6.1.4.1.89.35.1.60.23.4.1 | ScalarrsBWMAdvancedEntries | read-only | mandatory | Maximum number of advanced entries. |
| 1.3.6.1.4.1.89.35.1.60.23.4.2 | ScalarrsBWMAdvancedEntriesAfterReset | read-write | mandatory | Future maximum maximum number of advanced entries. |
| 1.3.6.1.4.1.89.35.1.60.23.5 | NodersBWMGroupTuning | |||
| 1.3.6.1.4.1.89.35.1.60.23.5.1 | ScalarrsBWMGroupEntries | read-only | mandatory | Maximum number of group entries. |
| 1.3.6.1.4.1.89.35.1.60.23.5.2 | ScalarrsBWMGroupEntriesAfterReset | read-write | mandatory | Future maximum maximum number of group entries. |
| 1.3.6.1.4.1.89.35.1.60.23.6 | NodersBWMDestinationTuning | |||
| 1.3.6.1.4.1.89.35.1.60.23.6.1 | ScalarrsBWMDestinationEntries | read-only | mandatory | Maximum number of destination entries. |
| 1.3.6.1.4.1.89.35.1.60.23.6.2 | ScalarrsBWMDestinationEntriesAfterReset | read-write | mandatory | Future maximum maximum number of destination entries. |
| 1.3.6.1.4.1.89.35.1.60.23.7 | NodersBWMSessionTuning | |||
| 1.3.6.1.4.1.89.35.1.60.23.7.1 | ScalarrsBWMSessionEntries | read-only | mandatory | Maximum number of session table. |
| 1.3.6.1.4.1.89.35.1.60.23.7.2 | ScalarrsBWMSessionEntriesAfterReset | read-write | mandatory | Future maximum maximum number of session table entries. |
| 1.3.6.1.4.1.89.35.1.60.23.8 | NodersBWMChainTuning | |||
| 1.3.6.1.4.1.89.35.1.60.23.8.1 | ScalarrsBWMMaxChainPolicies | read-only | mandatory | Maximum number of chain (farm cluster) policies. |
| 1.3.6.1.4.1.89.35.1.60.23.8.2 | ScalarrsBWMMaxChainPoliciesAfterReset | read-write | mandatory | Future maximum number of chain (farm cluster) policies. |
| 1.3.6.1.4.1.89.35.1.60.23.9 | NodersBWMContentTuning | |||
| 1.3.6.1.4.1.89.35.1.60.23.9.1 | ScalarrsBWMContentEntries | read-only | mandatory | Maximum number of content entries. |
| 1.3.6.1.4.1.89.35.1.60.23.9.2 | ScalarrsBWMContentEntriesAfterReset | read-write | mandatory | Future maximum maximum number of content entries. |
| 1.3.6.1.4.1.89.35.1.60.23.10 | NodersBWMNetworkIPTuning | |||
| 1.3.6.1.4.1.89.35.1.60.23.10.1 | ScalarrsBWMNetworkIPHashEntries | read-only | mandatory | Maximum number of entries in discrete IPs hash per network. |
| 1.3.6.1.4.1.89.35.1.60.23.10.2 | ScalarrsBWMNetworkIPHashEntriesAfterReset | read-write | mandatory | Future maximum maximum number of entries in discrete IPs hash per network. |
| 1.3.6.1.4.1.89.35.1.60.23.11 | NodersBWMNetworkRangeTuning | |||
| 1.3.6.1.4.1.89.35.1.60.23.11.1 | ScalarrsBWMNetworkRangeEntries | read-only | mandatory | Maximum number of ranges per network. |
| 1.3.6.1.4.1.89.35.1.60.23.11.2 | ScalarrsBWMNetworkRangeEntriesAfterReset | read-write | mandatory | Future maximum maximum number of ranges per network. |
| 1.3.6.1.4.1.89.35.1.60.23.12 | NodersBWMDynamicNetworkTuning | |||
| 1.3.6.1.4.1.89.35.1.60.23.12.1 | ScalarrsBWMDynamicNetworkEntries | read-only | mandatory | Maximum number of dynamic network entries. |
| 1.3.6.1.4.1.89.35.1.60.23.12.2 | ScalarrsBWMDynamicNetworkEntriesAfterReset | read-write | mandatory | Future maximum maximum number of dynamic network entries. |
| 1.3.6.1.4.1.89.35.1.60.23.13 | NodersBWMDynamicNetworkIPTuning | |||
| 1.3.6.1.4.1.89.35.1.60.23.13.1 | ScalarrsBWMDynamicNetworkIPHashEntries | read-only | mandatory | Maximum number of entries in discrete IPs hash per dynamic network. |
| 1.3.6.1.4.1.89.35.1.60.23.13.2 | ScalarrsBWMDynamicNetworkIPHashEntriesAfterReset | read-write | mandatory | Future maximum maximum number of entries in discrete IPs hash per dynamic network. |
| 1.3.6.1.4.1.89.35.1.60.23.14 | NodersBWMDynamicNetworkRangeTuning | |||
| 1.3.6.1.4.1.89.35.1.60.23.14.1 | ScalarrsBWMDynamicNetworkRangeEntries | read-only | mandatory | Maximum number of ranges per dynamic network. |
| 1.3.6.1.4.1.89.35.1.60.23.14.2 | ScalarrsBWMDynamicNetworkRangeEntriesAfterReset | read-write | mandatory | Future maximum maximum number of ranges per dynamic network. |
| 1.3.6.1.4.1.89.35.1.60.23.15 | NodersBWMMacGroupTuning | |||
| 1.3.6.1.4.1.89.35.1.60.23.15.1 | ScalarrsBWMMacGroupEntries | read-only | obsolete | Maximum number of MAC address groups. |
| 1.3.6.1.4.1.89.35.1.60.23.15.2 | ScalarrsBWMMacGroupEntriesAfterReset | read-write | obsolete | Future maximum number of MAC address groups. |
| 1.3.6.1.4.1.89.35.1.60.23.18 | NodersBWMParallelStringSearchMemoryTuning | |||
| 1.3.6.1.4.1.89.35.1.60.23.18.1 | ScalarrsBWMParallelStringSearchMemory | read-only | mandatory | Maximum memory size for Parallel String Search. |
| 1.3.6.1.4.1.89.35.1.60.23.18.2 | ScalarrsBWMParallelStringSearchMemoryAfterReset | read-write | mandatory | Future maximum memory size for Parallel String Search. |
| 1.3.6.1.4.1.89.35.1.60.23.19 | NodersBWMTrafficFlowBWTuning | |||
| 1.3.6.1.4.1.89.35.1.60.23.19.1 | ScalarrsBWMTrafficFlowBWEntries | read-only | mandatory | Maximum number of entries in the table that keeps track of sessions for BW per Traffic Flow Support. |
| 1.3.6.1.4.1.89.35.1.60.23.19.2 | ScalarrsBWMTrafficFlowBWEntriesAfterReset | read-write | mandatory | Future maximum number of entries in the table that keeps track of sessions for BW per Traffic Flow Support.. |
| 1.3.6.1.4.1.89.35.1.60.23.20 | NodersBWMAppPortGroupTuning | |||
| 1.3.6.1.4.1.89.35.1.60.23.20.1 | ScalarrsBWMAppPortGroupTuningEntries | read-only | mandatory | Maximum number of entries in application ports table. |
| 1.3.6.1.4.1.89.35.1.60.23.20.2 | ScalarrsBWMAppPortGroupTuningEntriesAfterReset | read-write | mandatory | Future Maximum number of entries in application ports table. |
| 1.3.6.1.4.1.89.35.1.60.23.21 | NodersBWMFarmsClassifyListsTuning | |||
| 1.3.6.1.4.1.89.35.1.60.23.21.1 | ScalarrsBWMFarmsClassifyListsTuningEntries | read-only | mandatory | Maximum number of entries in the farms classification lists table (each entry holds the relevant BWM policies for a pair of farms). |
| 1.3.6.1.4.1.89.35.1.60.23.21.2 | ScalarrsBWMFarmsClassifyListsTuningEntriesAfterReset | read-write | mandatory | Future maximum number of entries in the farms classification lists table. |
| 1.3.6.1.4.1.89.35.1.60.24 | TablersBWMDSCPEntryTable | not-accessible | mandatory | Table containing priority and bandwidth for each DSCP. |
| 1.3.6.1.4.1.89.35.1.60.24.1 | RowrsBWMDSCPEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.24.1.1 | ColumnrsBWMDSCP | read-only | mandatory | The DSCP - the value of DiffServ field in the IP header. |
| 1.3.6.1.4.1.89.35.1.60.24.1.2 | ColumnrsBWMDSCPPriority | read-write | mandatory | The priority of the packets with the specified DSCP. |
| 1.3.6.1.4.1.89.35.1.60.24.1.3 | ColumnrsBWMDSCPGuaranteedBW | read-write | mandatory | The bandwidth allocated for the specified DSCP. |
| 1.3.6.1.4.1.89.35.1.60.24.1.4 | ColumnrsBWMDSCPMaxBW | read-write | mandatory | The maximum bandwidth for the specified DSCP. |
| 1.3.6.1.4.1.89.35.1.60.25 | TablersBWMCurrentDSCPEntryTable | not-accessible | mandatory | Table containing priority and bandwidth for each DSCP. |
| 1.3.6.1.4.1.89.35.1.60.25.1 | RowrsBWMCurrentDSCPEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.25.1.1 | ColumnrsBWMCurrentDSCP | read-only | mandatory | The DSCP - the value of DiffServ field in the IP header. |
| 1.3.6.1.4.1.89.35.1.60.25.1.2 | ColumnrsBWMCurrentDSCPPriority | read-only | mandatory | The priority of the packets with the specified DSCP. |
| 1.3.6.1.4.1.89.35.1.60.25.1.3 | ColumnrsBWMCurrentDSCPGuaranteedBW | read-only | mandatory | The bandwidth allocated for the specified DSCP. |
| 1.3.6.1.4.1.89.35.1.60.25.1.4 | ColumnrsBWMCurrentDSCPMaxBW | read-only | mandatory | The maximum bandwidth for the specified DSCP. |
| 1.3.6.1.4.1.89.35.1.60.26 | ScalarrsBWMVersion | read-only | mandatory | The current QoS software version. |
| 1.3.6.1.4.1.89.35.1.60.27 | TablersBWMBwmPortOperationTable | not-accessible | mandatory | Table containing the operation for each port. |
| 1.3.6.1.4.1.89.35.1.60.27.1 | RowrsBWMBwmPortOperationEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.27.1.1 | ColumnrsBWMBwmInboundPort | read-only | mandatory | The index of the inbound port. |
| 1.3.6.1.4.1.89.35.1.60.27.1.2 | ColumnrsBWMBwmOutboundPort | read-only | mandatory | The index of the outbound port. |
| 1.3.6.1.4.1.89.35.1.60.27.1.3 | ColumnrsBWMBwmDirection | read-write | mandatory | This variable indicates the direction of the incoming packet. |
| 1.3.6.1.4.1.89.35.1.60.27.1.4 | ColumnrsBWMBwmOperationStatus | read-write | mandatory | The status of the current entry. |
| 1.3.6.1.4.1.89.35.1.60.28 | TablersBWMBwmVLANOperationTable | not-accessible | mandatory | Table containing the operation for each VLAN. |
| 1.3.6.1.4.1.89.35.1.60.28.1 | RowrsBWMBwmVLANOperationEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.28.1.1 | ColumnrsBWMBwmVLAN | read-only | mandatory | The VLAN. |
| 1.3.6.1.4.1.89.35.1.60.28.1.2 | ColumnrsBWMBwmVLANOperationStatus | read-write | mandatory | The status of the current entry. |
| 1.3.6.1.4.1.89.35.1.60.29 | ScalarrsBWMSessionAgingTime | read-write | mandatory | Obsolete mib id. |
| 1.3.6.1.4.1.89.35.1.60.30 | TablersBWMStatisticsTable | not-accessible | mandatory | Table containing statistics data for rules |
| 1.3.6.1.4.1.89.35.1.60.30.1 | RowrsBWMStatisticsEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.30.1.1 | ColumnrsBWMStatisticsPolicyName | read-only | mandatory | The name of the rule. |
| 1.3.6.1.4.1.89.35.1.60.30.1.2 | ColumnrsBWMStatisticsBandwidthUsedLastSec | read-only | mandatory | The bandwidth used by the rule in the last second. |
| 1.3.6.1.4.1.89.35.1.60.30.1.3 | ColumnrsBWMStatisticsPacketNumberLastSec | read-only | mandatory | The number of packets that match the rule in the last second. |
| 1.3.6.1.4.1.89.35.1.60.30.1.4 | ColumnrsBWMStatisticsFullQueueFailuresBWLastSec | read-only | mandatory | The amount of bandwidth that the device failed to allocate in the last second. |
| 1.3.6.1.4.1.89.35.1.60.30.1.5 | ColumnrsBWMStatisticsAgedPacketsFailuresBWLastSec | read-only | mandatory | The amount of bandwidth that the device failed to allocate in the last second, since the packets were discarded because of aging. |
| 1.3.6.1.4.1.89.35.1.60.30.1.6 | ColumnrsBWMStatisticsGuaranteedReachedLastSec | read-only | mandatory | Whether the guaranteed bandwidth threshold was reached in the last second. |
| 1.3.6.1.4.1.89.35.1.60.30.1.7 | ColumnrsBWMStatisticsMaximumReachedLastSec | read-only | mandatory | The number of times the maximum bandwidth threshold was reached in the last second. |
| 1.3.6.1.4.1.89.35.1.60.30.1.8 | ColumnrsBWMStatisticsBandwidthUsedLastPeriod | read-only | mandatory | The bandwidth used by the rule in the last sampling period defined in rsBWMStatisticsReportingPeriod. |
| 1.3.6.1.4.1.89.35.1.60.30.1.9 | ColumnrsBWMStatisticsPeakBandwidthLastPeriod | read-only | mandatory | The highest bandwidth in the last sampling period defined in rsBWMStatisticsReportingPeriod. |
| 1.3.6.1.4.1.89.35.1.60.30.1.10 | ColumnrsBWMStatisticsPacketNumberLastPeriod | read-only | mandatory | The number of packets that match the rule in the last sampling period defined in rsBWMStatisticsReportingPeriod. |
| 1.3.6.1.4.1.89.35.1.60.30.1.11 | ColumnrsBWMStatisticsFullQueueFailuresBWLastPeriod | read-only | mandatory | The amount of bandwidth that the device failed to allocate in the last sampling period defined in rsBWMStatisticsReportingPeriod, because the queue was full. |
| 1.3.6.1.4.1.89.35.1.60.30.1.12 | ColumnrsBWMStatisticsAgedPacketsFailuresBWLastPeriod | read-only | mandatory | The amount of bandwidth that the device failed to allocate in the last sampling period defined in rsBWMStatisticsReportingPeriod, since the packets were discar… |
| 1.3.6.1.4.1.89.35.1.60.30.1.13 | ColumnrsBWMStatisticsGuaranteedReachedCounterLastPeriod | read-only | mandatory | The number of times the guaranteed bandwidth threshold was reached in the last sampling period defined in rsBWMStatisticsReportingPeriod. |
| 1.3.6.1.4.1.89.35.1.60.30.1.14 | ColumnrsBWMStatisticsMaximumReachedCounterLastPeriod | read-only | mandatory | The number of times the maximum bandwidth threshold was reached in the last sampling period defined in rsBWMStatisticsReportingPeriod. |
| 1.3.6.1.4.1.89.35.1.60.30.1.15 | ColumnrsBWMStatisticsMatchedBandwidthLastSec | read-only | mandatory | The matched bandwidth in the last second. |
| 1.3.6.1.4.1.89.35.1.60.30.1.16 | ColumnrsBWMStatisticsMatchedBandwidthLastPeriod | read-only | mandatory | The matched bandwidth in the last sampling period. |
| 1.3.6.1.4.1.89.35.1.60.30.1.17 | ColumnrsBWMStatisticsInboundBandwidthUsedLastSec | read-only | mandatory | The inbound bandwidth used by the rule in the last second. |
| 1.3.6.1.4.1.89.35.1.60.30.1.18 | ColumnrsBWMStatisticsInboundBandwidthUsedLastPeriod | read-only | mandatory | The inbound bandwidth used by the rule in the last sampling period. |
| 1.3.6.1.4.1.89.35.1.60.30.1.19 | ColumnrsBWMStatisticsInboundMatchedBandwidthLastSec | read-only | mandatory | The inbound matched bandwidth in the last second. |
| 1.3.6.1.4.1.89.35.1.60.30.1.20 | ColumnrsBWMStatisticsInboundMatchedBandwidthLastPeriod | read-only | mandatory | The inbound matched bandwidth in the last sampling period. |
| 1.3.6.1.4.1.89.35.1.60.30.1.21 | ColumnrsBWMStatisticsInboundPacketNumberLastSec | read-only | mandatory | The number of inbound packets that match the rule in the last second. |
| 1.3.6.1.4.1.89.35.1.60.30.1.22 | ColumnrsBWMStatisticsInboundPacketNumberLastPeriod | read-only | mandatory | The number of inbound packets that match the rule in the last sampling period. |
| 1.3.6.1.4.1.89.35.1.60.30.1.23 | ColumnrsBWMStatisticsOutboundBandwidthUsedLastSec | read-only | mandatory | The outbound bandwidth used by the rule in the last second . |
| 1.3.6.1.4.1.89.35.1.60.30.1.24 | ColumnrsBWMStatisticsOutboundBandwidthUsedLastPeriod | read-only | mandatory | The outbound bandwidth used by the rule in the last sampling period. |
| 1.3.6.1.4.1.89.35.1.60.30.1.25 | ColumnrsBWMStatisticsOutboundMatchedBandwidthLastSec | read-only | mandatory | The outbound matched bandwidth in the last second. |
| 1.3.6.1.4.1.89.35.1.60.30.1.26 | ColumnrsBWMStatisticsOutboundMatchedBandwidthLastPeriod | read-only | mandatory | The outbound matched bandwidth in the last sampling period. |
| 1.3.6.1.4.1.89.35.1.60.30.1.27 | ColumnrsBWMStatisticsOutboundPacketNumberLastSec | read-only | mandatory | The number of outbound packets that match the rule in the last second. |
| 1.3.6.1.4.1.89.35.1.60.30.1.28 | ColumnrsBWMStatisticsOutboundPacketNumberLastPeriod | read-only | mandatory | The number of outbound packets that match the rule in the last sampling period. |
| 1.3.6.1.4.1.89.35.1.60.30.1.29 | ColumnrsBWMStatisticsNewTCPConnectionsLastSec | read-only | mandatory | The number of new TCP connections in the last second. |
| 1.3.6.1.4.1.89.35.1.60.30.1.30 | ColumnrsBWMStatisticsNewTCPConnectionsLastPeriod | read-only | mandatory | The number of new TCP connections in the last sampling period. |
| 1.3.6.1.4.1.89.35.1.60.30.1.31 | ColumnrsBWMStatisticsNewUDPConnectionsLastSec | read-only | mandatory | The number of new UDP connections in the last second. |
| 1.3.6.1.4.1.89.35.1.60.30.1.32 | ColumnrsBWMStatisticsNewUDPConnectionsLastPeriod | read-only | mandatory | The number of new UDP connections in the last sampling period. |
| 1.3.6.1.4.1.89.35.1.60.30.1.33 | ColumnrsBWMStatisticsQueuedBWLastSec | read-only | mandatory | The amount of queued bandwidth in the last second. |
| 1.3.6.1.4.1.89.35.1.60.30.1.34 | ColumnrsBWMStatisticsQueuedBWLastPeriod | read-only | mandatory | The amount of queued bandwidth in the last sampling period. |
| 1.3.6.1.4.1.89.35.1.60.30.2 | RowrsBWMStatisticsMonitorPolicy | read-write | mandatory | This variable indicates whether the device will gather policies' statistics. |
| 1.3.6.1.4.1.89.35.1.60.30.3 | RowrsBWMStatisticsTableUseSRP | read-write | mandatory | This variable indicates whether the device will send the data to ConfigWare using SRP. |
| 1.3.6.1.4.1.89.35.1.60.30.4 | RowrsBWMStatisticsReportingPeriod | read-write | mandatory | This variable indicates reporting frequency (in seconds) using SRP for BWM. |
| 1.3.6.1.4.1.89.35.1.60.31 | ScalarrsBWMSamplingRatio | read-write | mandatory | Sampling ratio: one of how many packets is sampled. |
| 1.3.6.1.4.1.89.35.1.60.32 | ScalarrsBWMSamplerOverloadMode | read-write | mandatory | Overload mechanism mode: forward/discard excess traffic. |
| 1.3.6.1.4.1.89.35.1.60.33 | TablersBWMChainRulesTable | not-accessible | mandatory | Table containing the list of chain rules for classifer data base, these rules can be used to classify packets for chaining. |
| 1.3.6.1.4.1.89.35.1.60.33.1 | RowrsBWMChainRulesEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.33.1.1 | ColumnrsBWMChainRulesIndex | read-write | mandatory | This variable indicates the administrative index of a line it determines the order of the rules. |
| 1.3.6.1.4.1.89.35.1.60.33.1.2 | ColumnrsBWMChainRulesName | read-only | mandatory | The Name for the Rule must be unique. |
| 1.3.6.1.4.1.89.35.1.60.33.1.3 | ColumnrsBWMChainRulesDestination | read-write | mandatory | The destination address / range of address for the packet, the name is defined in the Objects table or can be an IP address. |
| 1.3.6.1.4.1.89.35.1.60.33.1.4 | ColumnrsBWMChainRulesSource | read-write | mandatory | The source address / range of address for the packet, the name is defined in the Objects table or can be an IP address. |
| 1.3.6.1.4.1.89.35.1.60.33.1.5 | ColumnrsBWMChainRulesStatus | read-write | mandatory | This variable indicates the administrative status of this entry. Used to delete an entry of this table. |
| 1.3.6.1.4.1.89.35.1.60.33.1.6 | ColumnrsBWMChainRulesDirection | read-write | mandatory | This variable indicates the direction of the incoming packet. |
| 1.3.6.1.4.1.89.35.1.60.33.1.7 | ColumnrsBWMChainRulesDescription | read-write | mandatory | Description. |
| 1.3.6.1.4.1.89.35.1.60.33.1.8 | ColumnrsBWMChainRulesPolicyType | read-write | mandatory | The type of policy - i.e. if this is a filter, group or policy. |
| 1.3.6.1.4.1.89.35.1.60.33.1.9 | ColumnrsBWMChainRulesPolicy | read-write | mandatory | The name for the filter policy for the rule. |
| 1.3.6.1.4.1.89.35.1.60.33.1.10 | ColumnrsBWMChainRulesOperationalStatus | read-write | mandatory | This variable indicates if the rule is active or inactive. The active rule table contains only active rules. |
| 1.3.6.1.4.1.89.35.1.60.33.1.11 | ColumnrsBWMChainRulesSpecific | read-write | mandatory | This variable indicates if there is additional data to the policy. |
| 1.3.6.1.4.1.89.35.1.60.33.1.12 | ColumnrsBWMChainRulesPhysicalPortGroup | read-write | mandatory | The name of the physical port group for this rule. |
| 1.3.6.1.4.1.89.35.1.60.33.1.13 | ColumnrsBWMChainRulesVLANTagGroup | read-write | mandatory | The name of the VLAN tag group for this rule. |
| 1.3.6.1.4.1.89.35.1.60.33.1.14 | ColumnrsBWMChainRulesDSCPMarking | read-write | mandatory | This variable indicates the DSCP value to mark the ToS field in the IP header in the matching packets. If equals -1, the marking is not performed. |
| 1.3.6.1.4.1.89.35.1.60.33.1.15 | ColumnrsBWMChainRulesRadiusRule | read-write | mandatory | The name of the radius relevant this session belongs to. This field is relevant only for cid. Radius' rules names can be found in the Radius Rules Table |
| 1.3.6.1.4.1.89.35.1.60.34 | TablersBWMCurrentChainRulesTable | not-accessible | mandatory | Table containing the list of chain rules for classifer data base, these rules can be used to classify packets for chaining. |
| 1.3.6.1.4.1.89.35.1.60.34.1 | RowrsBWMCurrentChainRulesEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.34.1.1 | ColumnrsBWMCurrentChainRulesIndex | read-only | mandatory | This variable indicates the administrative index of a line it determine the order of the rules. |
| 1.3.6.1.4.1.89.35.1.60.34.1.2 | ColumnrsBWMCurrentChainRulesName | read-only | mandatory | The Name for the Rule must be unique. |
| 1.3.6.1.4.1.89.35.1.60.34.1.3 | ColumnrsBWMCurrentChainRulesDestination | read-only | mandatory | The destination address / range of address for the packet, the name is defined in the Objects table or can be an IP address. |
| 1.3.6.1.4.1.89.35.1.60.34.1.4 | ColumnrsBWMCurrentChainRulesSource | read-only | mandatory | The source address / range of address for the packet, the name is defined in the Objects table or can be an IP address. |
| 1.3.6.1.4.1.89.35.1.60.34.1.5 | ColumnrsBWMCurrentChainRulesDirection | read-only | mandatory | This variable indicates the direction of the incoming packet. |
| 1.3.6.1.4.1.89.35.1.60.34.1.6 | ColumnrsBWMCurrentChainRulesDescription | read-only | mandatory | Description. |
| 1.3.6.1.4.1.89.35.1.60.34.1.7 | ColumnrsBWMCurrentChainRulesPolicyType | read-only | mandatory | The type of policy - i.e. if this is a filter, group or policy. |
| 1.3.6.1.4.1.89.35.1.60.34.1.8 | ColumnrsBWMCurrentChainRulesPolicy | read-only | mandatory | The name for the filter policy for the rule. |
| 1.3.6.1.4.1.89.35.1.60.34.1.9 | ColumnrsBWMCurrentChainRulesSpecific | read-only | mandatory | This variable indicates if there is additional data to the policy. |
| 1.3.6.1.4.1.89.35.1.60.34.1.10 | ColumnrsBWMCurrentChainBandwidthLastSec | read-only | mandatory | The bandwidth used by the policy in the last second. |
| 1.3.6.1.4.1.89.35.1.60.34.1.11 | ColumnrsBWMCurrentChainPacketsLastSec | read-only | mandatory | The packets that matched the policy in the last second. |
| 1.3.6.1.4.1.89.35.1.60.34.1.12 | ColumnrsBWMCurrentChainRulesPhysicalPortGroup | read-only | mandatory | This name of the physical port group for this rule. |
| 1.3.6.1.4.1.89.35.1.60.34.1.13 | ColumnrsBWMCurrentChainRulesVLANTagGroup | read-only | mandatory | The name of the VLAN tag group for this rule. |
| 1.3.6.1.4.1.89.35.1.60.34.1.14 | ColumnrsBWMCurrentChainRulesDSCPMarking | read-only | mandatory | This variable indicates the DSCP value to mark the ToS field in the IP header in the matching packets. If equals -1, the marking is not performed. |
| 1.3.6.1.4.1.89.35.1.60.34.1.15 | ColumnrsBWMCurrentChainRulesRadiusRule | read-write | mandatory | The name of the radius rule this session belongs to. This field is relevant only for cid. Radius rules' names can be found in the Radius Rules Table |
| 1.3.6.1.4.1.89.35.1.60.35 | TablersBWMPPCInboundPortOnlyTable | not-accessible | mandatory | Table containing the operation for each inbound port (and not for port pairs). |
| 1.3.6.1.4.1.89.35.1.60.35.1 | RowrsBWMPPCInboundPortOnlyEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.35.1.1 | ColumnrsBWMPPCInboundPort | read-only | mandatory | The index of the inbound port. |
| 1.3.6.1.4.1.89.35.1.60.35.1.2 | ColumnrsBWMPPCOperationStatus | read-write | mandatory | The status of the current entry. |
| 1.3.6.1.4.1.89.35.1.60.36 | TablersBWMPhysicalPortGroupTable | not-accessible | mandatory | Table containing the entries of physical port groups. |
| 1.3.6.1.4.1.89.35.1.60.36.1 | RowrsBWMPhysicalPortGroupEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.36.1.1 | ColumnrsBWMPhysicalPortGroupName | read-only | mandatory | The name of the entry. |
| 1.3.6.1.4.1.89.35.1.60.36.1.2 | ColumnrsBWMPhysicalPortGroupPort | read-only | mandatory | The inbound port. |
| 1.3.6.1.4.1.89.35.1.60.36.1.3 | ColumnrsBWMPhysicalPortGroupOperationStatus | read-write | mandatory | The status of the current entry. |
| 1.3.6.1.4.1.89.35.1.60.37 | TablersBWMCurrentPhysicalPortGroupTable | not-accessible | mandatory | Table containing the entries of current physical port groups. |
| 1.3.6.1.4.1.89.35.1.60.37.1 | RowrsBWMCurrentPhysicalPortGroupEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.37.1.1 | ColumnrsBWMCurrentPhysicalPortGroupName | read-only | mandatory | The name of the entry. |
| 1.3.6.1.4.1.89.35.1.60.37.1.2 | ColumnrsBWMCurrentPhysicalPortGroupPort | read-only | mandatory | The inbound port. |
| 1.3.6.1.4.1.89.35.1.60.38 | TablersBWMFarmRulesTable | not-accessible | mandatory | Table containing the list of farm rules for classifer data base, these rules can be used to classify packets for farm. |
| 1.3.6.1.4.1.89.35.1.60.38.1 | RowrsBWMFarmRulesEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.38.1.1 | ColumnrsBWMFarmRulesIndex | read-write | mandatory | This variable indicates the administrative index of a line it determines the order of the rules. |
| 1.3.6.1.4.1.89.35.1.60.38.1.2 | ColumnrsBWMFarmRulesName | read-only | mandatory | The Name for the Rule must be unique. |
| 1.3.6.1.4.1.89.35.1.60.38.1.3 | ColumnrsBWMFarmRulesDestination | read-write | mandatory | The destination address / range of address for the packet, the name is defined in the Objects table or can be an IP address. |
| 1.3.6.1.4.1.89.35.1.60.38.1.4 | ColumnrsBWMFarmRulesSource | read-write | mandatory | The source address / range of address for the packet, the name is defined in the Objects table or can be an IP address. |
| 1.3.6.1.4.1.89.35.1.60.38.1.5 | ColumnrsBWMFarmRulesStatus | read-write | mandatory | This variable indicates the administrative status of this entry. Used to delete an entry of this table. |
| 1.3.6.1.4.1.89.35.1.60.38.1.6 | ColumnrsBWMFarmRulesDirection | read-write | mandatory | This variable indicates the direction of the incoming packet. |
| 1.3.6.1.4.1.89.35.1.60.38.1.7 | ColumnrsBWMFarmRulesDescription | read-write | mandatory | Description. |
| 1.3.6.1.4.1.89.35.1.60.38.1.8 | ColumnrsBWMFarmRulesPolicyType | read-write | mandatory | The type of policy - i.e. if this is a filter, group or policy. |
| 1.3.6.1.4.1.89.35.1.60.38.1.9 | ColumnrsBWMFarmRulesPolicy | read-write | mandatory | The name for the filter policy for the rule. |
| 1.3.6.1.4.1.89.35.1.60.38.1.10 | ColumnrsBWMFarmRulesOperationalStatus | read-write | mandatory | This variable indicates if the rule is active or inactive. The active rule table contains only active rules. |
| 1.3.6.1.4.1.89.35.1.60.38.1.11 | ColumnrsBWMFarmRulesSpecific | read-write | mandatory | This variable indicates if there is additional data to the policy. |
| 1.3.6.1.4.1.89.35.1.60.38.1.12 | ColumnrsBWMFarmRulesPhysicalPortGroup | read-write | mandatory | This name of the physical port group for this rule. |
| 1.3.6.1.4.1.89.35.1.60.38.1.13 | ColumnrsBWMFarmRulesVLANTagGroup | read-write | mandatory | The name of the VLAN tag group for this rule. |
| 1.3.6.1.4.1.89.35.1.60.38.1.14 | ColumnrsBWMFarmRulesDSCPMarking | read-write | mandatory | This variable indicates the DSCP value to mark the ToS field in the IP header in the matching packets. If equals -1, the marking is not performed. |
| 1.3.6.1.4.1.89.35.1.60.39 | TablersBWMCurrentFarmRulesTable | not-accessible | mandatory | Table containing the list of chain rules for classifer data base, these rules can be used to classify packets for chaining. |
| 1.3.6.1.4.1.89.35.1.60.39.1 | RowrsBWMCurrentFarmRulesEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.39.1.1 | ColumnrsBWMCurrentFarmRulesIndex | read-only | mandatory | This variable indicates the administrative index of a line it determine the order of the rules. |
| 1.3.6.1.4.1.89.35.1.60.39.1.2 | ColumnrsBWMCurrentFarmRulesName | read-only | mandatory | The Name for the Rule must be unique. |
| 1.3.6.1.4.1.89.35.1.60.39.1.3 | ColumnrsBWMCurrentFarmRulesDestination | read-only | mandatory | The destination address / range of address for the packet, the name is defined in the Objects table or can be an IP address. |
| 1.3.6.1.4.1.89.35.1.60.39.1.4 | ColumnrsBWMCurrentFarmRulesSource | read-only | mandatory | The source address / range of address for the packet, the name is defined in the Objects table or can be an IP address. |
| 1.3.6.1.4.1.89.35.1.60.39.1.5 | ColumnrsBWMCurrentFarmRulesDirection | read-only | mandatory | This variable indicates the direction of the incoming packet. |
| 1.3.6.1.4.1.89.35.1.60.39.1.6 | ColumnrsBWMCurrentFarmRulesDescription | read-only | mandatory | Description. |
| 1.3.6.1.4.1.89.35.1.60.39.1.7 | ColumnrsBWMCurrentFarmRulesPolicyType | read-only | mandatory | The type of policy - i.e. if this is a filter, group or policy. |
| 1.3.6.1.4.1.89.35.1.60.39.1.8 | ColumnrsBWMCurrentFarmRulesPolicy | read-only | mandatory | The name for the filter policy for the rule. |
| 1.3.6.1.4.1.89.35.1.60.39.1.9 | ColumnrsBWMCurrentFarmRulesSpecific | read-only | mandatory | This variable indicates if there is additional data to the policy. |
| 1.3.6.1.4.1.89.35.1.60.39.1.10 | ColumnrsBWMCurrentFarmBandwidthLastSec | read-only | mandatory | The bandwidth used by the policy in the last second. |
| 1.3.6.1.4.1.89.35.1.60.39.1.11 | ColumnrsBWMCurrentFarmPacketsLastSec | read-only | mandatory | The packets that matched the policy in the last second. |
| 1.3.6.1.4.1.89.35.1.60.39.1.12 | ColumnrsBWMCurrentFarmRulesPhysicalPortGroup | read-only | mandatory | This name of the physical port group for this rule. |
| 1.3.6.1.4.1.89.35.1.60.39.1.13 | ColumnrsBWMCurrentFarmRulesVLANTagGroup | read-only | mandatory | The name of the VLAN tag group for this rule. |
| 1.3.6.1.4.1.89.35.1.60.39.1.14 | ColumnrsBWMCurrentFarmRulesDSCPMarking | read-only | mandatory | This variable indicates the DSCP value to mark the ToS field in the IP header in the matching packets. If equals -1, the marking is not performed. |
| 1.3.6.1.4.1.89.35.1.60.40 | ScalarrsBWMOMPCHashTableOffset | read-write | mandatory | The offset of the OMPC hash table. |
| 1.3.6.1.4.1.89.35.1.60.41 | ScalarrsBWMOMPCHashTableMask | read-write | mandatory | The mask of the OMPC hash table. |
| 1.3.6.1.4.1.89.35.1.60.42 | ScalarrsBWMNoSaveMode | read-write | mandatory | Indicates if BWM data structures are stored in CDB (disable) or in cdbbuf(enable). |
| 1.3.6.1.4.1.89.35.1.60.46 | ScalarrsBWMStringSearchMode | read-write | mandatory | Indicates if regular string search is used in the content module. |
| 1.3.6.1.4.1.89.35.1.60.47 | TablersBWMVLANTagGroupTable | not-accessible | mandatory | Table for VLAN tag groups. |
| 1.3.6.1.4.1.89.35.1.60.47.1 | RowrsBWMVLANTagGroupEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.47.1.1 | ColumnrsBWMVLANTagGroupName | read-only | mandatory | The name of the VLAN tag group. |
| 1.3.6.1.4.1.89.35.1.60.47.1.2 | ColumnrsBWMVLANTagGroupVLANTag | read-only | mandatory | The value of VLAN tag in discrete mode. |
| 1.3.6.1.4.1.89.35.1.60.47.1.3 | ColumnrsBWMVLANTagGroupVLANTagFrom | read-only | mandatory | The 'from' part of the VLAN tag range. |
| 1.3.6.1.4.1.89.35.1.60.47.1.4 | ColumnrsBWMVLANTagGroupVLANTagTo | read-write | mandatory | The 'to' part of the VLAN tag range. |
| 1.3.6.1.4.1.89.35.1.60.47.1.5 | ColumnrsBWMVLANTagGroupMode | read-write | mandatory | The mode of the VLAN tag group: discrete or range. |
| 1.3.6.1.4.1.89.35.1.60.47.1.6 | ColumnrsBWMVLANTagGroupStatus | read-write | mandatory | The row status of the entry. |
| 1.3.6.1.4.1.89.35.1.60.48 | TablersBWMCurrentVLANTagGroupTable | not-accessible | mandatory | Current table for VLAN tag groups. |
| 1.3.6.1.4.1.89.35.1.60.48.1 | RowrsBWMCurrentVLANTagGroupEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.48.1.1 | ColumnrsBWMCurrentVLANTagGroupName | read-only | mandatory | The name of the VLAN tag group. |
| 1.3.6.1.4.1.89.35.1.60.48.1.2 | ColumnrsBWMCurrentVLANTagGroupVLANTag | read-only | mandatory | The value of VLAN tag in discrete mode. |
| 1.3.6.1.4.1.89.35.1.60.48.1.3 | ColumnrsBWMCurrentVLANTagGroupVLANTagFrom | read-only | mandatory | The 'from' part of the VLAN tag range. |
| 1.3.6.1.4.1.89.35.1.60.48.1.4 | ColumnrsBWMCurrentVLANTagGroupVLANTagTo | read-only | mandatory | The 'to' part of the VLAN tag range. |
| 1.3.6.1.4.1.89.35.1.60.48.1.5 | ColumnrsBWMCurrentVLANTagGroupMode | read-only | mandatory | The mode of the VLAN tag group: discrete or range. |
| 1.3.6.1.4.1.89.35.1.60.49 | TablersBWMMacGroupTable | not-accessible | mandatory | Table containing the groups of MAC addresses. |
| 1.3.6.1.4.1.89.35.1.60.49.1 | RowrsBWMMacGroupEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.49.1.1 | ColumnrsBWMMacGroupEntryName | read-only | mandatory | The Name for the MACs group. |
| 1.3.6.1.4.1.89.35.1.60.49.1.2 | ColumnrsBWMMacGroupEntryAddress | read-only | mandatory | the MAC address in the group. |
| 1.3.6.1.4.1.89.35.1.60.49.1.3 | ColumnrsBWMMacGroupEntryStatus | read-write | mandatory | This variable indicates the administrative status of this entry. Used to delete an entry of this table. |
| 1.3.6.1.4.1.89.35.1.60.50 | TablersBWMMacGroupCurrentTable | not-accessible | mandatory | Table containing the current groups of MAC addresses. |
| 1.3.6.1.4.1.89.35.1.60.50.1 | RowrsBWMMacGroupCurrentEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.50.1.1 | ColumnrsBWMMacGroupCurrentEntryName | read-only | mandatory | The Name for the MACs group. |
| 1.3.6.1.4.1.89.35.1.60.50.1.2 | ColumnrsBWMMacGroupCurrentEntryAddress | read-only | mandatory | the MAC address in the group. |
| 1.3.6.1.4.1.89.35.1.60.51 | ScalarrsBWMQueueSize | read-write | mandatory | Enables the user to configure the queue size |
| 1.3.6.1.4.1.89.35.1.60.52 | ScalarrsBWMTrafficFlowBWAgingTime | read-write | mandatory | The aging time for the traffic flow BW table. After this number of seconds without activity, the session is deleted. |
| 1.3.6.1.4.1.89.35.1.60.53 | TablersBWMServiceTable | not-accessible | mandatory | Table containing the available services. |
| 1.3.6.1.4.1.89.35.1.60.53.1 | RowrsBWMServiceEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.53.1.1 | ColumnrsBWMServiceTableType | read-only | mandatory | The specific table to access. |
| 1.3.6.1.4.1.89.35.1.60.53.1.2 | ColumnrsBWMServiceType | read-only | mandatory | The type of entry. ids and idsStatic are obsolete. |
| 1.3.6.1.4.1.89.35.1.60.53.1.3 | ColumnrsBWMServiceName | read-only | mandatory | The filter or advanced or group name (of type rsBWMServiceType). |
| 1.3.6.1.4.1.89.35.1.60.54 | TablersBWMPolicyGroupTable | not-accessible | mandatory | Table containing the available Policy groups. |
| 1.3.6.1.4.1.89.35.1.60.54.1 | RowrsBWMPolicyGroupEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.54.1.1 | ColumnrsBWMPolicyGroupEntryName | read-only | mandatory | The Name for the Policy group. |
| 1.3.6.1.4.1.89.35.1.60.54.1.2 | ColumnrsBWMPolicyGroupEntryStatus | read-write | mandatory | This variable indicates the administrative status of this entry. Used to delete an entry of this table. |
| 1.3.6.1.4.1.89.35.1.60.55 | TablersBWMPolicyGroupCurrentTable | not-accessible | mandatory | Table containing the current groups of classes. |
| 1.3.6.1.4.1.89.35.1.60.55.1 | RowrsBWMPolicyGroupCurrentEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.55.1.1 | ColumnrsBWMPolicyGroupCurrentEntryName | read-only | mandatory | The Name for the Classs group. |
| 1.3.6.1.4.1.89.35.1.60.56 | TablersBWMAppPortGroupEntryTable | not-accessible | mandatory | Table containing the application port range. |
| 1.3.6.1.4.1.89.35.1.60.56.1 | RowrsBWMAppPortGroupEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.56.1.1 | ColumnrsBWMAppPortGroupName | read-write | mandatory | The name of the application port range object. |
| 1.3.6.1.4.1.89.35.1.60.56.1.2 | ColumnrsBWMAppPortGroupFromPort | read-write | mandatory | The starting port. |
| 1.3.6.1.4.1.89.35.1.60.56.1.3 | ColumnrsBWMAppPortGroupToPort | read-write | mandatory | The last valid port. |
| 1.3.6.1.4.1.89.35.1.60.56.1.4 | ColumnrsBWMAppPortGroupType | read-write | mandatory | The type of object. This can be regular (user defined) or static (defined by the application). |
| 1.3.6.1.4.1.89.35.1.60.56.1.5 | ColumnrsBWMAppPortGroupStatus | read-write | mandatory | The status of the object. |
| 1.3.6.1.4.1.89.35.1.60.57 | TablersBWMCurrentAppPortGroupEntryTable | not-accessible | mandatory | Table containing the application port range. |
| 1.3.6.1.4.1.89.35.1.60.57.1 | RowrsBWMCurrentAppPortGroupEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.57.1.1 | ColumnrsBWMCurrentAppPortGroupName | read-only | mandatory | The name of the application port range object. |
| 1.3.6.1.4.1.89.35.1.60.57.1.2 | ColumnrsBWMCurrentAppPortGroupFromPort | read-only | mandatory | The starting port. |
| 1.3.6.1.4.1.89.35.1.60.57.1.3 | ColumnrsBWMCurrentAppPortGroupToPort | read-only | mandatory | The last valid port. |
| 1.3.6.1.4.1.89.35.1.60.57.1.4 | ColumnrsBWMCurrentAppPortGroupType | read-only | mandatory | The type of object. This can be regular (user defined) or static (defined by the application). |
| 1.3.6.1.4.1.89.35.1.60.58 | ScalarrsBWMDefaultGatewayClassificatiomMode | read-write | mandatory | If enabled, BWM classification will be performed only on traffic to/from the configured default gateway. |
| 1.3.6.1.4.1.89.35.1.60.59 | TablersBWMExtRulesTable | not-accessible | mandatory | Table containing the extended list of rules for classifer data base |
| 1.3.6.1.4.1.89.35.1.60.59.1 | RowrsBWMExtRulesEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.59.1.1 | ColumnrsBWMExtRulesName | read-only | mandatory | The Name for the Rule must be unique. |
| 1.3.6.1.4.1.89.35.1.60.59.1.2 | ColumnrsBWMExtRulesFromFarm | read-write | mandatory | The source farm of the packet for classification. |
| 1.3.6.1.4.1.89.35.1.60.59.1.3 | ColumnrsBWMExtRulesToFarm | read-write | mandatory | The destination farm of the packet for classification. |
| 1.3.6.1.4.1.89.35.1.60.59.1.4 | ColumnrsBWMExtRulesClassificationPoint | read-write | mandatory | Whether the classification will be performed on the original packet, or on the packet after all changes. |
| 1.3.6.1.4.1.89.35.1.60.59.1.5 | ColumnrsBWMExtRulesTrafficIdentification | read-write | mandatory | This variable indicates how a traffic flow is defined for this policy. |
| 1.3.6.1.4.1.89.35.1.60.59.1.6 | ColumnrsBWMExtRulesTrafficFlowMaxBW | read-write | mandatory | Maximum bandwidth allocated for a certain traffic flow (session) that match this rule. |
| 1.3.6.1.4.1.89.35.1.60.59.1.7 | ColumnrsBWMExtRulesMaxConcurrentSessions | read-write | mandatory | Maximum number of sessions that can be open simultaneously per traffic flow. |
| 1.3.6.1.4.1.89.35.1.60.59.1.8 | ColumnrsBWMExtRulesMaxRqstsPerSec | read-write | mandatory | Maximum number of http requests that will be forwarded in a second for each traffic flow. |
| 1.3.6.1.4.1.89.35.1.60.59.1.9 | ColumnrsBWMExtRulesTrafficIDCookieField | read-write | mandatory | The name of cookie field for Traafic Flow ID by cookie. |
| 1.3.6.1.4.1.89.35.1.60.59.1.10 | ColumnrsBWMExtRulesStatus | read-write | mandatory | This variable indicates the administrative status of this entry. Used to delete an entry of this table. |
| 1.3.6.1.4.1.89.35.1.60.59.1.11 | ColumnrsBWMExtRulesActivate | read-write | mandatory | The name of the schedule that will activate the policy. |
| 1.3.6.1.4.1.89.35.1.60.59.1.12 | ColumnrsBWMExtRulesInactivate | read-write | mandatory | The name of the schedule that will inactivate the policy. |
| 1.3.6.1.4.1.89.35.1.60.59.1.13 | ColumnrsBWMExtRulesForceBestFit | read-write | mandatory | Whether to force session best fit on the policy while classification. |
| 1.3.6.1.4.1.89.35.1.60.59.1.14 | ColumnrsBWMExtRulesPacketMarkingType | read-write | mandatory | Type of packet marking for packets matching this policy. DSCP marking will set 6 low bits Tos marking will set bits 3-6. |
| 1.3.6.1.4.1.89.35.1.60.59.1.15 | ColumnrsBWMExtRulesPacketMarkingValue | read-write | mandatory | Value of packet marking in the TOS field of the ip header. For DSCP marking value should be 0-63. For TOS it should be 0-7 |
| 1.3.6.1.4.1.89.35.1.60.59.1.16 | ColumnrsBWMExtRulesReportMaxBw | read-write | mandatory | Whether to report when the policy discards packets becasue of max bw limitations. |
| 1.3.6.1.4.1.89.35.1.60.60 | TablersBWMCurrentExtRulesTable | not-accessible | mandatory | Table containing the extended list of rules for classifer data base |
| 1.3.6.1.4.1.89.35.1.60.60.1 | RowrsBWMCurrentExtRulesEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.60.1.1 | ColumnrsBWMCurrentExtRulesName | read-only | mandatory | The Name for the Rule must be unique. |
| 1.3.6.1.4.1.89.35.1.60.60.1.2 | ColumnrsBWMCurrentExtRulesFromFarm | read-only | mandatory | The source farm of the packet for classification. |
| 1.3.6.1.4.1.89.35.1.60.60.1.3 | ColumnrsBWMCurrentExtRulesToFarm | read-only | mandatory | The destination farm of the packet for classification. |
| 1.3.6.1.4.1.89.35.1.60.60.1.4 | ColumnrsBWMCurrentExtRulesClassificationPoint | read-only | mandatory | Whether the classification will be performed on the original packet, or on the packet after all changes. |
| 1.3.6.1.4.1.89.35.1.60.60.1.5 | ColumnrsBWMCurrentExtRulesTrafficIdentification | read-only | mandatory | This variable indicates how a traffic flow is defined for this policy. |
| 1.3.6.1.4.1.89.35.1.60.60.1.6 | ColumnrsBWMCurrentExtRulesTrafficFlowMaxBW | read-only | mandatory | Maximum bandwidth allocated for a certain traffic flow (session) that match this rule. |
| 1.3.6.1.4.1.89.35.1.60.60.1.7 | ColumnrsBWMCurrentExtRulesMaxConcurrentSessions | read-only | mandatory | Maximum number of sessions that can be open simultaneously per traffic flow. |
| 1.3.6.1.4.1.89.35.1.60.60.1.8 | ColumnrsBWMCurrentExtRulesMaxRqstsPerSec | read-only | mandatory | Maximum number of http requests that will be forwarded in a second for each traffic flow. |
| 1.3.6.1.4.1.89.35.1.60.60.1.9 | ColumnrsBWMCurrentExtRulesTrafficIDCookieField | read-only | mandatory | The name of cookie field for Traafic Flow ID by cookie. |
| 1.3.6.1.4.1.89.35.1.60.60.1.10 | ColumnrsBWMCurrentExtRulesActivate | read-only | mandatory | The name of the schedule that will activate the policy. |
| 1.3.6.1.4.1.89.35.1.60.60.1.11 | ColumnrsBWMCurrentExtRulesInactivate | read-only | mandatory | The name of the schedule that will inactivate the policy. |
| 1.3.6.1.4.1.89.35.1.60.60.1.12 | ColumnrsBWMCurrentExtRulesForceBestFit | read-only | mandatory | Whether the policy is best fit for session while classification. |
| 1.3.6.1.4.1.89.35.1.60.60.1.13 | ColumnrsBWMCurrentExtRulesPacketMarkingType | read-only | mandatory | Type of packet marking for packets matching this policy. DSCP marking will set 6 low bits Tos marking will set bits 3-6. |
| 1.3.6.1.4.1.89.35.1.60.60.1.14 | ColumnrsBWMCurrentExtRulesPacketMarkingValue | read-only | mandatory | Value of packet marking in the TOS field of the ip header. For DSCP marking value should be 0-63. For TOS it should be 0-7 |
| 1.3.6.1.4.1.89.35.1.60.60.1.15 | ColumnrsBWMCurrentExtRulesReportMaxBw | read-only | mandatory | Whether to report when the policy discards packets becasue of max bw limitations. |
| 1.3.6.1.4.1.89.35.1.60.61 | NodersBWMRulesTreeManager | |||
| 1.3.6.1.4.1.89.35.1.60.61.1 | ScalarrsBWMRulesTreeName | read-write | mandatory | The name for the subtree root. |
| 1.3.6.1.4.1.89.35.1.60.61.2 | ScalarrsBWMRulesTreeNewParentName | read-write | mandatory | The new parent for the subtree. |
| 1.3.6.1.4.1.89.35.1.60.61.3 | ScalarrsBWMRulesTreeAction | read-write | mandatory | Rule tree advanced management. |
| 1.3.6.1.4.1.89.35.1.60.62 | ScalarrsBWMTCPSessionClassification | read-write | mandatory | Indicates the mode of classification for a TCP session. |
| 1.3.6.1.4.1.89.35.1.60.63 | TablersBWMNetworkTable | not-accessible | mandatory | Table containing the grouping for ranges. |
| 1.3.6.1.4.1.89.35.1.60.63.1 | RowrsBWMNetworkEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.63.1.1 | ColumnrsBWMNetworkName | read-only | mandatory | The Name for the IP Object Rule, must be unique. |
| 1.3.6.1.4.1.89.35.1.60.63.1.2 | ColumnrsBWMNetworkSubIndex | read-only | mandatory | SubIndex. |
| 1.3.6.1.4.1.89.35.1.60.63.1.3 | ColumnrsBWMNetworkAddress | read-write | mandatory | IP address |
| 1.3.6.1.4.1.89.35.1.60.63.1.4 | ColumnrsBWMNetworkMask | read-write | mandatory | IP address mask. |
| 1.3.6.1.4.1.89.35.1.60.63.1.5 | ColumnrsBWMNetworkFromIP | read-write | mandatory | The from IP Address of the range. |
| 1.3.6.1.4.1.89.35.1.60.63.1.6 | ColumnrsBWMNetworkToIP | read-write | mandatory | The to IP Address of the range. |
| 1.3.6.1.4.1.89.35.1.60.63.1.7 | ColumnrsBWMNetworkMode | read-write | mandatory | This variable indicates the mode of the entry. This is either a range or an IP address and mask. |
| 1.3.6.1.4.1.89.35.1.60.63.1.8 | ColumnrsBWMNetworkStatus | read-write | mandatory | This variable indicates the administrative status of this entry. Used to delete an entry of this table. |
| 1.3.6.1.4.1.89.35.1.60.64 | TablersBWMCurrentNetworkTable | not-accessible | mandatory | Table containing the grouping for ranges. |
| 1.3.6.1.4.1.89.35.1.60.64.1 | RowrsBWMCurrentNetworkEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.64.1.1 | ColumnrsBWMCurrentNetworkName | read-only | mandatory | The Name for the IP Object Rule, must be unique. |
| 1.3.6.1.4.1.89.35.1.60.64.1.2 | ColumnrsBWMCurrentNetworkSubIndex | read-only | mandatory | SubIndex. |
| 1.3.6.1.4.1.89.35.1.60.64.1.3 | ColumnrsBWMCurrentNetworkAddress | read-only | mandatory | IP address |
| 1.3.6.1.4.1.89.35.1.60.64.1.4 | ColumnrsBWMCurrentNetworkMask | read-only | mandatory | IP address mask. |
| 1.3.6.1.4.1.89.35.1.60.64.1.5 | ColumnrsBWMCurrentNetworkFromIP | read-only | mandatory | The from IP Address of the range. |
| 1.3.6.1.4.1.89.35.1.60.64.1.6 | ColumnrsBWMCurrentNetworkToIP | read-only | mandatory | The to IP Address of the range. |
| 1.3.6.1.4.1.89.35.1.60.64.1.7 | ColumnrsBWMCurrentNetworkMode | read-only | mandatory | This variable indicates the mode of the entry. This is either a range or an IP address and mask. |
| 1.3.6.1.4.1.89.35.1.60.65 | TablersBWMStatisticsNewTable | not-accessible | mandatory | Table containing statistics data for the bwm policies (with integer key) |
| 1.3.6.1.4.1.89.35.1.60.65.1 | RowrsBWMStatisticsNewEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.65.1.1 | ColumnrsBWMStatisticsPolicyKey | read-only | mandatory | The name of the rule. |
| 1.3.6.1.4.1.89.35.1.60.65.1.2 | ColumnrsBWMStatisticsPolicyNameSec | read-only | mandatory | The name of the rule. |
| 1.3.6.1.4.1.89.35.1.60.65.1.3 | ColumnrsBWMStatisticsBandwidthUsedSecond | read-only | mandatory | The bandwidth used by the rule in the last second. |
| 1.3.6.1.4.1.89.35.1.60.65.1.4 | ColumnrsBWMStatisticsPacketNumberSecond | read-only | mandatory | The number of packets that match the rule in the last second. |
| 1.3.6.1.4.1.89.35.1.60.65.1.5 | ColumnrsBWMStatisticsGuaranteedReachedSecond | read-only | mandatory | Whether the guaranteed bandwidth threshold was reached in the last second. |
| 1.3.6.1.4.1.89.35.1.60.65.1.6 | ColumnrsBWMStatisticsMaximumReachedSecond | read-only | mandatory | The number of times the maximum bandwidth threshold was reached in the last second. |
| 1.3.6.1.4.1.89.35.1.60.65.1.7 | ColumnrsBWMStatisticsMatchedBandwidthSecond | read-only | mandatory | The matched bandwidth in the last second. |
| 1.3.6.1.4.1.89.35.1.60.65.1.8 | ColumnrsBWMStatisticsInboundBandwidthUsedSecond | read-only | mandatory | The inbound bandwidth used by the rule in the last second. |
| 1.3.6.1.4.1.89.35.1.60.65.1.9 | ColumnrsBWMStatisticsInboundMatchedBandwidthSecond | read-only | mandatory | The inbound matched bandwidth in the last second. |
| 1.3.6.1.4.1.89.35.1.60.65.1.10 | ColumnrsBWMStatisticsInboundPacketNumberSecond | read-only | mandatory | The number of inbound packets that match the rule in the last second. |
| 1.3.6.1.4.1.89.35.1.60.65.1.11 | ColumnrsBWMStatisticsOutboundBandwidthUsedSecond | read-only | mandatory | The outbound bandwidth used by the rule in the last second . |
| 1.3.6.1.4.1.89.35.1.60.65.1.12 | ColumnrsBWMStatisticsOutboundMatchedBandwidthSecond | read-only | mandatory | The outbound matched bandwidth in the last second. |
| 1.3.6.1.4.1.89.35.1.60.65.1.13 | ColumnrsBWMStatisticsOutboundPacketNumberSecond | read-only | mandatory | The number of outbound packets that match the rule in the last second. |
| 1.3.6.1.4.1.89.35.1.60.65.1.14 | ColumnrsBWMStatisticsNewTCPConnectionsSecond | read-only | mandatory | The number of new TCP connections in the last second. |
| 1.3.6.1.4.1.89.35.1.60.65.1.15 | ColumnrsBWMStatisticsNewUDPConnectionsSecond | read-only | mandatory | The number of new UDP connections in the last second. |
| 1.3.6.1.4.1.89.35.1.60.65.1.16 | ColumnrsBWMStatisticsQueuedBWSecond | read-only | mandatory | The amount of queued bandwidth in the last second. |
| 1.3.6.1.4.1.89.35.1.60.65.1.17 | ColumnrsBWMStatisticsBandwidthUsedPeriod | read-only | mandatory | The bandwidth used by the rule in the last sampling period defined in rsBWMStatisticsReportingPeriod. |
| 1.3.6.1.4.1.89.35.1.60.65.1.18 | ColumnrsBWMStatisticsPeakBandwidthPeriod | read-only | mandatory | The highest bandwidth in the last sampling period defined in rsBWMStatisticsReportingPeriod. |
| 1.3.6.1.4.1.89.35.1.60.65.1.19 | ColumnrsBWMStatisticsPacketNumberPeriod | read-only | mandatory | The number of packets that match the rule in the last sampling period defined in rsBWMStatisticsReportingPeriod. |
| 1.3.6.1.4.1.89.35.1.60.65.1.20 | ColumnrsBWMStatisticsGuaranteedReachedCounterPeriod | read-only | mandatory | The number of times the guaranteed bandwidth threshold was reached in the last sampling period defined in rsBWMStatisticsReportingPeriod. |
| 1.3.6.1.4.1.89.35.1.60.65.1.21 | ColumnrsBWMStatisticsMaximumReachedCounterPeriod | read-only | mandatory | The number of times the maximum bandwidth threshold was reached in the last sampling period defined in rsBWMStatisticsReportingPeriod. |
| 1.3.6.1.4.1.89.35.1.60.65.1.22 | ColumnrsBWMStatisticsMatchedBandwidthPeriod | read-only | mandatory | The matched bandwidth in the last sampling period. |
| 1.3.6.1.4.1.89.35.1.60.65.1.23 | ColumnrsBWMStatisticsInboundBandwidthUsedPeriod | read-only | mandatory | The inbound bandwidth used by the rule in the last sampling period. |
| 1.3.6.1.4.1.89.35.1.60.65.1.24 | ColumnrsBWMStatisticsInboundMatchedBandwidthPeriod | read-only | mandatory | The inbound matched bandwidth in the last sampling period. |
| 1.3.6.1.4.1.89.35.1.60.65.1.25 | ColumnrsBWMStatisticsInboundPacketNumberPeriod | read-only | mandatory | The number of inbound packets that match the rule in the last sampling period. |
| 1.3.6.1.4.1.89.35.1.60.65.1.26 | ColumnrsBWMStatisticsOutboundBandwidthUsedPeriod | read-only | mandatory | The outbound bandwidth used by the rule in the last sampling period. |
| 1.3.6.1.4.1.89.35.1.60.65.1.27 | ColumnrsBWMStatisticsOutboundMatchedBandwidthPeriod | read-only | mandatory | The outbound matched bandwidth in the last sampling period. |
| 1.3.6.1.4.1.89.35.1.60.65.1.28 | ColumnrsBWMStatisticsOutboundPacketNumberPeriod | read-only | mandatory | The number of outbound packets that match the rule in the last sampling period. |
| 1.3.6.1.4.1.89.35.1.60.65.1.29 | ColumnrsBWMStatisticsNewTCPConnectionsPeriod | read-only | mandatory | The number of new TCP connections in the last sampling period. |
| 1.3.6.1.4.1.89.35.1.60.65.1.30 | ColumnrsBWMStatisticsNewUDPConnectionsPeriod | read-only | mandatory | The number of new UDP connections in the last sampling period. |
| 1.3.6.1.4.1.89.35.1.60.65.1.31 | ColumnrsBWMStatisticsQueuedBWPeriod | read-only | mandatory | The amount of queued bandwidth in the last sampling period. |
| 1.3.6.1.4.1.89.35.1.60.66 | TablersBWMPoliciesTable | not-accessible | mandatory | Table containing the list of rules for classifer data base, these rules can be used to classify packets for bandwidth management, this table has the same conte… |
| 1.3.6.1.4.1.89.35.1.60.66.1 | RowrsBWMPolicyEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.66.1.1 | ColumnrsBWMPolicyKey | read-write | mandatory | This is an integer key of this table. it has to be unique |
| 1.3.6.1.4.1.89.35.1.60.66.1.2 | ColumnrsBWMPolicyName | read-write | mandatory | The Name for the Rule must be unique. |
| 1.3.6.1.4.1.89.35.1.60.66.1.3 | ColumnrsBWMPolicyIndex | read-write | mandatory | This variable indicates the administrative index of a line it determines the order of the rules. |
| 1.3.6.1.4.1.89.35.1.60.66.1.4 | ColumnrsBWMPolicyDestination | read-write | mandatory | The destination address / range of address for the packet, the name is defined in the Objects table or can be an IP address. |
| 1.3.6.1.4.1.89.35.1.60.66.1.5 | ColumnrsBWMPolicySource | read-write | mandatory | The source address / range of address for the packet, the name is defined in the Objects table or can be an IP address. |
| 1.3.6.1.4.1.89.35.1.60.66.1.6 | ColumnrsBWMPolicyAction | read-write | mandatory | This variable indicates the action that the classifier / service must take on this entry. |
| 1.3.6.1.4.1.89.35.1.60.66.1.7 | ColumnrsBWMPolicyDirection | read-write | mandatory | This variable indicates the direction of the incoming packet. |
| 1.3.6.1.4.1.89.35.1.60.66.1.8 | ColumnrsBWMPolicyPriority | read-write | mandatory | This variable indicates the priority for this entry. |
| 1.3.6.1.4.1.89.35.1.60.66.1.9 | ColumnrsBWMPolicyType | read-write | mandatory | This variable indicates the type of rules (services) . |
| 1.3.6.1.4.1.89.35.1.60.66.1.10 | ColumnrsBWMPolicyDescription | read-write | mandatory | Description. |
| 1.3.6.1.4.1.89.35.1.60.66.1.11 | ColumnrsBWMPolicyGuaranteedBW | read-write | mandatory | Bandwidth allocated for a certain rule. |
| 1.3.6.1.4.1.89.35.1.60.66.1.12 | ColumnrsBWMPolicyFilterType | read-write | mandatory | The type of policy - i.e. if this is a filter, group or policy. |
| 1.3.6.1.4.1.89.35.1.60.66.1.13 | ColumnrsBWMPolicyFilter | read-write | mandatory | The name for the filter policy for the rule. |
| 1.3.6.1.4.1.89.35.1.60.66.1.14 | ColumnrsBWMPolicyOperationalStatus | read-write | mandatory | This variable indicates if the rule is active or inactive. The active rule table contains only active rules. |
| 1.3.6.1.4.1.89.35.1.60.66.1.15 | ColumnrsBWMPolicyReportBlockedPackets | read-write | mandatory | This variable indicates if blocked packets are be reported. |
| 1.3.6.1.4.1.89.35.1.60.66.1.16 | ColumnrsBWMPolicyMaxBW | read-write | mandatory | Maximum bandwidth allocated for a certain rule. |
| 1.3.6.1.4.1.89.35.1.60.66.1.17 | ColumnrsBWMPolicyPhysicalPortGroup | read-write | mandatory | The name of the physical port group for this rule. |
| 1.3.6.1.4.1.89.35.1.60.66.1.18 | ColumnrsBWMPolicyVLANTagGroup | read-write | mandatory | The name of the VLAN tag group for this rule. |
| 1.3.6.1.4.1.89.35.1.60.66.1.19 | ColumnrsBWMPolicySpecific | read-write | mandatory | This variable indicates if there is additional data to the policy. |
| 1.3.6.1.4.1.89.35.1.60.66.1.20 | ColumnrsBWMPolicyStatus | read-write | mandatory | This variable indicates the administrative status of this entry. Used to delete an entry of this table. |
| 1.3.6.1.4.1.89.35.1.60.66.1.21 | ColumnrsBWMPolicyRadiusRule | read-write | mandatory | The name of the radius relevant this session belongs to. This field is relevant only for cid. Radius' rules names can be found in the Radius Rules Table |
| 1.3.6.1.4.1.89.35.1.60.67 | TablersBWMCurrentPoliciesTable | not-accessible | mandatory | Table containing the list of rules for classifer data base, these rules can be used to classify packets for bandwidth management, this table has the same conte… |
| 1.3.6.1.4.1.89.35.1.60.67.1 | RowrsBWMCurrentPolicyEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.67.1.1 | ColumnrsBWMCurrentPolicyKey | read-write | mandatory | This is an integer key of this table. it has to be unique |
| 1.3.6.1.4.1.89.35.1.60.67.1.2 | ColumnrsBWMCurrentPolicyName | read-only | mandatory | The Name for the Rule must be unique. |
| 1.3.6.1.4.1.89.35.1.60.67.1.3 | ColumnrsBWMCurrentPolicyIndex | read-write | mandatory | This variable indicates the administrative index of a line it determines the order of the rules. |
| 1.3.6.1.4.1.89.35.1.60.67.1.4 | ColumnrsBWMCurrentPolicyDestination | read-write | mandatory | The destination address / range of address for the packet, the name is defined in the Objects table or can be an IP address. |
| 1.3.6.1.4.1.89.35.1.60.67.1.5 | ColumnrsBWMCurrentPolicySource | read-write | mandatory | The source address / range of address for the packet, the name is defined in the Objects table or can be an IP address. |
| 1.3.6.1.4.1.89.35.1.60.67.1.6 | ColumnrsBWMCurrentPolicyAction | read-write | mandatory | This variable indicates the action that the classifier / service must take on this entry. |
| 1.3.6.1.4.1.89.35.1.60.67.1.7 | ColumnrsBWMCurrentPolicyDirection | read-write | mandatory | This variable indicates the direction of the incoming packet. |
| 1.3.6.1.4.1.89.35.1.60.67.1.8 | ColumnrsBWMCurrentPolicyPriority | read-write | mandatory | This variable indicates the priority for this entry. |
| 1.3.6.1.4.1.89.35.1.60.67.1.9 | ColumnrsBWMCurrentPolicyType | read-write | mandatory | This variable indicates the type of rules (services) . |
| 1.3.6.1.4.1.89.35.1.60.67.1.10 | ColumnrsBWMCurrentPolicyDescription | read-write | mandatory | Description. |
| 1.3.6.1.4.1.89.35.1.60.67.1.11 | ColumnrsBWMCurrentPolicyGuaranteedBW | read-write | mandatory | Bandwidth allocated for a certain rule. |
| 1.3.6.1.4.1.89.35.1.60.67.1.12 | ColumnrsBWMCurrentPolicyFilterType | read-write | mandatory | The type of policy - i.e. if this is a filter, group or policy. |
| 1.3.6.1.4.1.89.35.1.60.67.1.13 | ColumnrsBWMCurrentPolicyFilter | read-write | mandatory | The name for the filter policy for the rule. |
| 1.3.6.1.4.1.89.35.1.60.67.1.14 | ColumnrsBWMCurrentPolicyReportBlockedPackets | read-write | mandatory | This variable indicates if blocked packets are be reported. |
| 1.3.6.1.4.1.89.35.1.60.67.1.15 | ColumnrsBWMCurrentPolicyMaxBW | read-write | mandatory | Maximum bandwidth allocated for a certain rule. |
| 1.3.6.1.4.1.89.35.1.60.67.1.16 | ColumnrsBWMCurrentPolicyPhysicalPortGroup | read-write | mandatory | The name of the physical port group for this rule. |
| 1.3.6.1.4.1.89.35.1.60.67.1.17 | ColumnrsBWMCurrentPolicyVLANTagGroup | read-write | mandatory | The name of the VLAN tag group for this rule. |
| 1.3.6.1.4.1.89.35.1.60.67.1.18 | ColumnrsBWMCurrentPolicySpecific | read-write | mandatory | This variable indicates if there is additional data to the policy. |
| 1.3.6.1.4.1.89.35.1.60.67.1.19 | ColumnrsBWMCurrentPolicyRadiusRule | read-write | mandatory | The name of the radius relevant this session belongs to. This field is relevant only for cid. Radius' rules names can be found in the Radius Rules Table |
| 1.3.6.1.4.1.89.35.1.60.68 | TablersBWMExtPoliciesTable | not-accessible | mandatory | Table containing the extended list of rules for classifer data base. This table has the same content as rsBWMExtRulesTable, but the key is an integer |
| 1.3.6.1.4.1.89.35.1.60.68.1 | RowrsBWMExtPolicyEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.68.1.1 | ColumnrsBWMExtPolicyKey | read-only | mandatory | The key of this table. |
| 1.3.6.1.4.1.89.35.1.60.68.1.2 | ColumnrsBWMExtPolicyName | read-write | mandatory | The Name for the Rule must be unique. |
| 1.3.6.1.4.1.89.35.1.60.68.1.3 | ColumnrsBWMExtPolicyFromFarm | read-write | mandatory | The source farm of the packet for classification. |
| 1.3.6.1.4.1.89.35.1.60.68.1.4 | ColumnrsBWMExtPolicyToFarm | read-write | mandatory | The destination farm of the packet for classification. |
| 1.3.6.1.4.1.89.35.1.60.68.1.5 | ColumnrsBWMExtPolicyClassificationPoint | read-write | mandatory | Whether the classification will be performed on the original packet, or on the packet after all changes. |
| 1.3.6.1.4.1.89.35.1.60.68.1.6 | ColumnrsBWMExtPolicyTrafficIdentification | read-write | mandatory | This variable indicates how a traffic flow is defined for this policy. |
| 1.3.6.1.4.1.89.35.1.60.68.1.7 | ColumnrsBWMExtPolicyTrafficFlowMaxBW | read-write | mandatory | Maximum bandwidth allocated for a certain traffic flow (session) that match this rule. |
| 1.3.6.1.4.1.89.35.1.60.68.1.8 | ColumnrsBWMExtPolicyMaxConcurrentSessions | read-write | mandatory | Maximum number of sessions that can be open simultaneously per traffic flow. |
| 1.3.6.1.4.1.89.35.1.60.68.1.9 | ColumnrsBWMExtPolicyMaxRqstsPerSec | read-write | mandatory | Maximum number of http requests that will be forwarded in a second for each traffic flow. |
| 1.3.6.1.4.1.89.35.1.60.68.1.10 | ColumnrsBWMExtPolicyTrafficIDCookieField | read-write | mandatory | The name of cookie field for Traafic Flow ID by cookie. |
| 1.3.6.1.4.1.89.35.1.60.68.1.11 | ColumnrsBWMExtPolicyStatus | read-write | mandatory | This variable indicates the administrative status of this entry. Used to delete an entry of this table. |
| 1.3.6.1.4.1.89.35.1.60.68.1.12 | ColumnrsBWMExtPolicyActivate | read-write | mandatory | The name of the schedule that will activate the policy. |
| 1.3.6.1.4.1.89.35.1.60.68.1.13 | ColumnrsBWMExtPolicyInactivate | read-write | mandatory | The name of the schedule that will inactivate the policy. |
| 1.3.6.1.4.1.89.35.1.60.68.1.14 | ColumnrsBWMExtPolicyForceBestFit | read-write | mandatory | Whether to force session best fit on the policy while classification. |
| 1.3.6.1.4.1.89.35.1.60.68.1.15 | ColumnrsBWMExtPolicyPacketMarkingType | read-write | mandatory | Type of packet marking for packets matching this policy. DSCP marking will set 6 low bits Tos marking will set bits 3-6. |
| 1.3.6.1.4.1.89.35.1.60.68.1.16 | ColumnrsBWMExtPolicyPacketMarkingValue | read-write | mandatory | Value of packet marking in the TOS field of the ip header. For DSCP marking value should be 0-63. For TOS it should be 0-7 |
| 1.3.6.1.4.1.89.35.1.60.68.1.17 | ColumnrsBWMExtPolicyReportMaxBw | read-write | mandatory | Whether to report when the policy discards packets becasue of max bw limitations. |
| 1.3.6.1.4.1.89.35.1.60.69 | TablersBWMCurrentExtPoliciesTable | not-accessible | mandatory | Table containing the extended list of rules for classifer data base |
| 1.3.6.1.4.1.89.35.1.60.69.1 | RowrsBWMCurrentExtPolicyEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.69.1.1 | ColumnrsBWMCurrentExtPolicyKey | read-only | mandatory | The key for this table. |
| 1.3.6.1.4.1.89.35.1.60.69.1.2 | ColumnrsBWMCurrentExtPolicyName | read-only | mandatory | The Name for the Rule must be unique. |
| 1.3.6.1.4.1.89.35.1.60.69.1.3 | ColumnrsBWMCurrentExtPolicyFromFarm | read-only | mandatory | The source farm of the packet for classification. |
| 1.3.6.1.4.1.89.35.1.60.69.1.4 | ColumnrsBWMCurrentExtPolicyToFarm | read-only | mandatory | The destination farm of the packet for classification. |
| 1.3.6.1.4.1.89.35.1.60.69.1.5 | ColumnrsBWMCurrentExtPolicyClassificationPoint | read-only | mandatory | Whether the classification will be performed on the original packet, or on the packet after all changes. |
| 1.3.6.1.4.1.89.35.1.60.69.1.6 | ColumnrsBWMCurrentExtPolicyTrafficIdentification | read-only | mandatory | This variable indicates how a traffic flow is defined for this policy. |
| 1.3.6.1.4.1.89.35.1.60.69.1.7 | ColumnrsBWMCurrentExtPolicyTrafficFlowMaxBW | read-only | mandatory | Maximum bandwidth allocated for a certain traffic flow (session) that match this rule. |
| 1.3.6.1.4.1.89.35.1.60.69.1.8 | ColumnrsBWMCurrentExtPolicyMaxConcurrentSessions | read-only | mandatory | Maximum number of sessions that can be open simultaneously per traffic flow. |
| 1.3.6.1.4.1.89.35.1.60.69.1.9 | ColumnrsBWMCurrentExtPolicyMaxRqstsPerSec | read-only | mandatory | Maximum number of http requests that will be forwarded in a second for each traffic flow. |
| 1.3.6.1.4.1.89.35.1.60.69.1.10 | ColumnrsBWMCurrentExtPolicyTrafficIDCookieField | read-only | mandatory | The name of cookie field for Traafic Flow ID by cookie. |
| 1.3.6.1.4.1.89.35.1.60.69.1.11 | ColumnrsBWMCurrentExtPolicyActivate | read-only | mandatory | The name of the schedule that will activate the policy. |
| 1.3.6.1.4.1.89.35.1.60.69.1.12 | ColumnrsBWMCurrentExtPolicyInactivate | read-only | mandatory | The name of the schedule that will inactivate the policy. |
| 1.3.6.1.4.1.89.35.1.60.69.1.13 | ColumnrsBWMCurrentExtPolicyForceBestFit | read-only | mandatory | Whether the policy is best fit for session while classification. |
| 1.3.6.1.4.1.89.35.1.60.69.1.14 | ColumnrsBWMCurrentExtPolicyPacketMarkingType | read-only | mandatory | Type of packet marking for packets matching this policy. DSCP marking will set 6 low bits Tos marking will set bits 3-6. |
| 1.3.6.1.4.1.89.35.1.60.69.1.15 | ColumnrsBWMCurrentExtPolicyPacketMarkingValue | read-only | mandatory | Value of packet marking in the TOS field of the ip header. For DSCP marking value should be 0-63. For TOS it should be 0-7 |
| 1.3.6.1.4.1.89.35.1.60.69.1.16 | ColumnrsBWMCurrentExtPolicyReportMaxBw | read-only | mandatory | Whether to report when the policy discards packets becasue of max bw limitations. |
| 1.3.6.1.4.1.89.35.1.60.70 | ScalarrsBWMMaxPacketsForClassification | read-write | mandatory | Indicates the maximum number of data packets per session that will be used for the classification of a session (in per session mode). |
| 1.3.6.1.4.1.89.35.1.60.71 | NodersBWMACL | |||
| 1.3.6.1.4.1.89.35.1.60.71.1 | TablersBWMACLModifyPoliciesTable | not-accessible | mandatory | Table containing the list of modified policies for the ACL module |
| 1.3.6.1.4.1.89.35.1.60.71.1.1 | RowrsBWMACLModifyPolicyEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.71.1.1.1 | ColumnrsBWMACLModifyPolicyName | read-only | mandatory | The name of the policy. |
| 1.3.6.1.4.1.89.35.1.60.71.1.1.2 | ColumnrsBWMACLModifyPolicyIndex | read-write | mandatory | This variable indicates the administrative index of a line it determines the order of the policies. |
| 1.3.6.1.4.1.89.35.1.60.71.1.1.3 | ColumnrsBWMACLModifyPolicyDescription | read-write | mandatory | Description. |
| 1.3.6.1.4.1.89.35.1.60.71.1.1.4 | ColumnrsBWMACLModifyPolicyDestination | read-write | mandatory | The destination address / range of address for the packet, the name is defined in the networks table or can be an IP address. |
| 1.3.6.1.4.1.89.35.1.60.71.1.1.5 | ColumnrsBWMACLModifyPolicySource | read-write | mandatory | The source address / range of address for the packet, the name is defined in the networks table or can be an IP address. |
| 1.3.6.1.4.1.89.35.1.60.71.1.1.6 | ColumnrsBWMACLModifyPolicyService | read-write | mandatory | The name of the service used for classification. |
| 1.3.6.1.4.1.89.35.1.60.71.1.1.7 | ColumnrsBWMACLModifyPolicyVLANTagGroup | read-write | mandatory | The name of the VLAN tag group for this policy. |
| 1.3.6.1.4.1.89.35.1.60.71.1.1.8 | ColumnrsBWMACLModifyPolicyPortGroup | read-write | mandatory | The name of the physical port group for this policy. |
| 1.3.6.1.4.1.89.35.1.60.71.1.1.9 | ColumnrsBWMACLModifyPolicyActivate | read-write | mandatory | The name of the schedule that will activate the policy. |
| 1.3.6.1.4.1.89.35.1.60.71.1.1.10 | ColumnrsBWMACLModifyPolicyInactivate | read-write | mandatory | The name of the schedule that will inactivate the policy. |
| 1.3.6.1.4.1.89.35.1.60.71.1.1.11 | ColumnrsBWMACLModifyPolicyAction | read-write | mandatory | This variable indicates the action that the ACL must take on this entry. |
| 1.3.6.1.4.1.89.35.1.60.71.1.1.12 | ColumnrsBWMACLModifyPolicyProtocol | read-write | mandatory | This variable indicates the protocol this policy refers to. |
| 1.3.6.1.4.1.89.35.1.60.71.1.1.13 | ColumnrsBWMACLModifyPolicyIcmpFlags | read-write | mandatory | This variable marks the icmp message types this policy refers to. |
| 1.3.6.1.4.1.89.35.1.60.71.1.1.14 | ColumnrsBWMACLModifyPolicyClassificationPoint | read-write | mandatory | Whether the classification will be performed on the original packet, or on the packet after all changes. |
| 1.3.6.1.4.1.89.35.1.60.71.1.1.15 | ColumnrsBWMACLModifyPolicyOperationalStatus | read-write | mandatory | This variable indicates if the rule is active or inactive. The active rule table contains only active rules. |
| 1.3.6.1.4.1.89.35.1.60.71.1.1.16 | ColumnrsBWMACLModifyPolicyStatus | read-write | mandatory | This variable indicates the administrative status of this entry. Used to delete an entry of this table. |
| 1.3.6.1.4.1.89.35.1.60.71.1.1.17 | ColumnrsBWMACLModifyPolicyPacketReportStatus | read-write | mandatory | This value determines whether the device issues a trap when the data matches the policy. |
| 1.3.6.1.4.1.89.35.1.60.71.2 | TablersBWMACLActualPoliciesTable | not-accessible | mandatory | Table containing the list of actual policies for the ACL module |
| 1.3.6.1.4.1.89.35.1.60.71.2.1 | RowrsBWMACLActualPolicyEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.71.2.1.1 | ColumnrsBWMACLActualPolicyName | read-only | mandatory | The name of the policy. |
| 1.3.6.1.4.1.89.35.1.60.71.2.1.2 | ColumnrsBWMACLActualPolicyIndex | read-only | mandatory | This variable indicates the administrative index of a line it determines the order of the policies. |
| 1.3.6.1.4.1.89.35.1.60.71.2.1.3 | ColumnrsBWMACLActualPolicyDescription | read-only | mandatory | Description. |
| 1.3.6.1.4.1.89.35.1.60.71.2.1.4 | ColumnrsBWMACLActualPolicyDestination | read-only | mandatory | The destination address / range of address for the packet, the name is defined in the networks table or can be an IP address. |
| 1.3.6.1.4.1.89.35.1.60.71.2.1.5 | ColumnrsBWMACLActualPolicySource | read-only | mandatory | The source address / range of address for the packet, the name is defined in the networks table or can be an IP address. |
| 1.3.6.1.4.1.89.35.1.60.71.2.1.6 | ColumnrsBWMACLActualPolicyService | read-only | mandatory | The name of the service used for classification. |
| 1.3.6.1.4.1.89.35.1.60.71.2.1.7 | ColumnrsBWMACLActualPolicyVLANTagGroup | read-only | mandatory | The name of the VLAN tag group for this policy. |
| 1.3.6.1.4.1.89.35.1.60.71.2.1.8 | ColumnrsBWMACLActualPolicyPortGroup | read-only | mandatory | The name of the physical port group for this policy. |
| 1.3.6.1.4.1.89.35.1.60.71.2.1.9 | ColumnrsBWMACLActualPolicyActivate | read-only | mandatory | The name of the schedule that will activate the policy. |
| 1.3.6.1.4.1.89.35.1.60.71.2.1.10 | ColumnrsBWMACLActualPolicyInactivate | read-only | mandatory | The name of the schedule that will inactivate the policy. |
| 1.3.6.1.4.1.89.35.1.60.71.2.1.11 | ColumnrsBWMACLActualPolicyAction | read-only | mandatory | This variable indicates the action that the ACL must take on this entry. |
| 1.3.6.1.4.1.89.35.1.60.71.2.1.12 | ColumnrsBWMACLActualPolicyProtocol | read-only | mandatory | This variable indicates the protocol this policy refers to. |
| 1.3.6.1.4.1.89.35.1.60.71.2.1.13 | ColumnrsBWMACLActualPolicyIcmpFlags | read-only | mandatory | This variable marks the icmp message types this policy refers to. |
| 1.3.6.1.4.1.89.35.1.60.71.2.1.14 | ColumnrsBWMACLActualPolicyClassificationPoint | read-only | mandatory | Whether the classification will be performed on the original packet, or on the packet after all changes. |
| 1.3.6.1.4.1.89.35.1.60.71.2.1.15 | ColumnrsBWMACLActualPolicyOperationalStatus | read-only | mandatory | This variable indicates if the rule is active or inactive. The active rule table contains only active rules. |
| 1.3.6.1.4.1.89.35.1.60.71.2.1.16 | ColumnrsBWMACLActualPolicyPacketReportStatus | read-only | mandatory | This value determines whether the device issues a trap when the data matches the policy. |
| 1.3.6.1.4.1.89.35.1.60.71.3 | ScalarrsBWMACLStatus | read-write | mandatory | The status of the ACL module. |
| 1.3.6.1.4.1.89.35.1.60.71.4 | ScalarrsBWMACLLearningPeriod | read-write | mandatory | The learning period of the ACL in seconds. |
| 1.3.6.1.4.1.89.35.1.60.71.5 | ScalarrsBWMACLTCPHandshakeTimeout | read-write | mandatory | The timeout of tcp sessions in the handshake state. |
| 1.3.6.1.4.1.89.35.1.60.71.6 | ScalarrsBWMACLTCPEstablishedTimeout | read-write | mandatory | The timeout of tcp sessions in the established state. |
| 1.3.6.1.4.1.89.35.1.60.71.7 | ScalarrsBWMACLTCPFinTimeout | read-write | mandatory | The timeout of tcp sessions in the fin state. |
| 1.3.6.1.4.1.89.35.1.60.71.8 | ScalarrsBWMACLTCPRstTimeout | read-write | mandatory | The timeout of tcp sessions in the reset state. |
| 1.3.6.1.4.1.89.35.1.60.71.9 | ScalarrsBWMACLTCPMidSessMode | read-write | mandatory | The action taken for tcp mid session packets. |
| 1.3.6.1.4.1.89.35.1.60.71.10 | ScalarrsBWMACLTCPRstValidationMode | read-write | mandatory | The action taken for invalid reset packets. |
| 1.3.6.1.4.1.89.35.1.60.71.11 | ScalarrsBWMACLUDPTimeout | read-write | mandatory | The timeout of udp sessions. |
| 1.3.6.1.4.1.89.35.1.60.71.12 | ScalarrsBWMACLICMPTimeout | read-write | mandatory | The timeout of icmp sessions. |
| 1.3.6.1.4.1.89.35.1.60.71.13 | ScalarrsBWMACLOtherTimeout | read-write | mandatory | The timeout of other sessions (not tcp, udp, gre, l2tp, gtp, sctp or icmp). |
| 1.3.6.1.4.1.89.35.1.60.71.14 | TablersBWMACLSummaryReportsTable | not-accessible | mandatory | Table containing the summary reports of each ACL policy |
| 1.3.6.1.4.1.89.35.1.60.71.14.1 | RowrsBWMACLSummaryReportsEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.71.14.1.1 | ColumnrsBWMACLSummaryReportsPolicyName | read-only | mandatory | The name of the policy. |
| 1.3.6.1.4.1.89.35.1.60.71.14.1.2 | ColumnrsBWMACLSummaryReportsTCPAllow | read-only | mandatory | The number of TCP allowed sessions last period |
| 1.3.6.1.4.1.89.35.1.60.71.14.1.3 | ColumnrsBWMACLSummaryReportsTCPDrop | read-only | mandatory | The number of TCP dropped sessions last period |
| 1.3.6.1.4.1.89.35.1.60.71.14.1.4 | ColumnrsBWMACLSummaryReportsUDPAllow | read-only | mandatory | The number of UDP allowed sessions last period |
| 1.3.6.1.4.1.89.35.1.60.71.14.1.5 | ColumnrsBWMACLSummaryReportsUDPDrop | read-only | mandatory | The number of UDP dropped sessions last period |
| 1.3.6.1.4.1.89.35.1.60.71.14.1.6 | ColumnrsBWMACLSummaryReportsICMPAllow | read-only | mandatory | The number of ICMP allowed messaged last period |
| 1.3.6.1.4.1.89.35.1.60.71.14.1.7 | ColumnrsBWMACLSummaryReportsICMPDrop | read-only | mandatory | The number of ICMP dropped messages last period |
| 1.3.6.1.4.1.89.35.1.60.71.14.1.8 | ColumnrsBWMACLSummaryReportsOtherAllow | read-only | mandatory | The number of other porotocols allowed sessions last period |
| 1.3.6.1.4.1.89.35.1.60.71.14.1.9 | ColumnrsBWMACLSummaryReportsOtherDrop | read-only | mandatory | The number of other protocols dropped sessions last period |
| 1.3.6.1.4.1.89.35.1.60.71.14.1.10 | ColumnrsBWMACLSummaryReportsTCPMidSess | read-only | mandatory | The number of mid flow TCP sessions last period |
| 1.3.6.1.4.1.89.35.1.60.71.14.1.11 | ColumnrsBWMACLSummaryReportsTCPRstInvalid | read-only | mandatory | The number of invalid TCP reset packets last period |
| 1.3.6.1.4.1.89.35.1.60.71.14.1.12 | ColumnrsBWMACLSummaryReportsTCPHandshakeViolation | read-only | mandatory | The number of invalid TCP handshakes |
| 1.3.6.1.4.1.89.35.1.60.71.14.1.13 | ColumnrsBWMACLSummaryReportsICMPSmurf | read-only | mandatory | The number of ICMP smurf packets (reply message arriving without a request message) last period |
| 1.3.6.1.4.1.89.35.1.60.71.14.1.14 | ColumnrsBWMACLSummaryReportsICMPPacketAnomaly | read-only | mandatory | The number of abnormal ICMP packets |
| 1.3.6.1.4.1.89.35.1.60.71.14.1.15 | ColumnrsBWMACLSummaryReportsGREAllow | read-only | mandatory | The number of GRE allowed sessions last period |
| 1.3.6.1.4.1.89.35.1.60.71.14.1.16 | ColumnrsBWMACLSummaryReportsGREDrop | read-only | mandatory | The number of GRE dropped sessions last period |
| 1.3.6.1.4.1.89.35.1.60.71.14.1.17 | ColumnrsBWMACLSummaryReportsSCTPAllow | read-only | mandatory | The number of SCTP allowed sessions last period |
| 1.3.6.1.4.1.89.35.1.60.71.14.1.18 | ColumnrsBWMACLSummaryReportsSCTPDrop | read-only | mandatory | The number of SCTP dropped sessions last period |
| 1.3.6.1.4.1.89.35.1.60.71.14.1.19 | ColumnrsBWMACLSummaryReportsL2TPAllow | read-only | mandatory | The number of L2TP allowed sessions last period |
| 1.3.6.1.4.1.89.35.1.60.71.14.1.20 | ColumnrsBWMACLSummaryReportsL2TPDrop | read-only | mandatory | The number of L2TP dropped sessions last period |
| 1.3.6.1.4.1.89.35.1.60.71.14.1.21 | ColumnrsBWMACLSummaryReportsGTPAllow | read-only | mandatory | The number of GTP allowed sessions last period |
| 1.3.6.1.4.1.89.35.1.60.71.14.1.22 | ColumnrsBWMACLSummaryReportsGTPDrop | read-only | mandatory | The number of GTP dropped sessions last period |
| 1.3.6.1.4.1.89.35.1.60.71.14.1.23 | ColumnrsBWMACLSummaryReportsIPinIPAllow | read-only | mandatory | The number of IPinIP allowed sessions last period |
| 1.3.6.1.4.1.89.35.1.60.71.14.1.24 | ColumnrsBWMACLSummaryReportsIPinIPDrop | read-only | mandatory | The number of IPinIP dropped sessions last period |
| 1.3.6.1.4.1.89.35.1.60.71.15 | ScalarrsBWMACLReportMaxTraps | read-write | mandatory | Maximum number of ACL detailed report traps sent per second. |
| 1.3.6.1.4.1.89.35.1.60.71.16 | ScalarrsBWMACLReportPeriod | read-write | mandatory | ACL reports period for summary reports and for sending SRP. |
| 1.3.6.1.4.1.89.35.1.60.71.17 | ScalarrsBWMACLReportSendSrp | read-write | mandatory | Whether the ACL module send summary reports via SRP or not. |
| 1.3.6.1.4.1.89.35.1.60.71.18 | ScalarrsBWMACLDetailedReportType | read-write | mandatory | The type of detailed reports the ACL will send. |
| 1.3.6.1.4.1.89.35.1.60.71.19 | ScalarrsBWMACLGRETimeout | read-write | mandatory | The timeout of gre sessions. |
| 1.3.6.1.4.1.89.35.1.60.71.20 | ScalarrsBWMACLSCTPTimeout | read-write | mandatory | The timeout of sctp sessions. |
| 1.3.6.1.4.1.89.35.1.60.71.21 | ScalarrsBWMACLAllowICMPSmurf | read-write | mandatory | An indication whether ICMP smurf checks should be ignored. |
| 1.3.6.1.4.1.89.35.1.60.71.22 | ScalarrsBWMACLL2TPTimeout | read-write | mandatory | The timeout of l2tp sessions. |
| 1.3.6.1.4.1.89.35.1.60.71.23 | ScalarrsBWMACLGTPTimeout | read-write | mandatory | The timeout of gtp sessions. |
| 1.3.6.1.4.1.89.35.1.60.71.24 | ScalarrsBWMACLPacketTraceStatus | read-write | mandatory | The status of the ACL packet trace. |
| 1.3.6.1.4.1.89.35.1.60.71.25 | ScalarrsBWMACLIPinIPTimeout | read-write | mandatory | The timeout of Ip in Ip sessions. |
| 1.3.6.1.4.1.89.35.1.60.71.26 | ScalarrsBWMACLDefaultAction | read-write | mandatory | The action set for the default policy after reboot |
| 1.3.6.1.4.1.89.35.1.60.73 | TablersBWMSecGroupTable | not-accessible | mandatory | Table containing the groups of SEC tags. |
| 1.3.6.1.4.1.89.35.1.60.73.1 | RowrsBWMModifySecGrpTag | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.73.1.1 | ColumnrsBWMSecGroupEntryName | read-only | mandatory | The Name for the SECs group. |
| 1.3.6.1.4.1.89.35.1.60.73.1.2 | ColumnrsBWMSecGroupEntryValue | read-write | mandatory | The Value for the SGT. |
| 1.3.6.1.4.1.89.35.1.60.73.1.3 | ColumnrsBWMSecGroupEntryStatus | read-write | mandatory | The Status for the SGT. |
| 1.3.6.1.4.1.89.35.1.60.73.1.4 | ColumnrsBWMSecGroupEntryRowStatus | read-write | mandatory | This variable indicates the status of this entry. |
| 1.3.6.1.4.1.89.35.1.60.74 | TablersBWMSecGroupCurrentTable | not-accessible | mandatory | Table containing the current groups of SEC tags. |
| 1.3.6.1.4.1.89.35.1.60.74.1 | RowrsBWMActiveSecGrpTag | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.60.74.1.1 | ColumnrsBWMSecGroupActiveEntryName | read-only | mandatory | The Name for the SECs group. |
| 1.3.6.1.4.1.89.35.1.60.74.1.2 | ColumnrsBWMSecGroupEntryActiveValue | read-only | mandatory | The Value for the SGT. |