C-PRODUCT-CBR-MIB
40 objects
No module-level DESCRIPTION found.
Imported Objects
| C-PRODUCT-BASE-MIB | portNumber portSlot TimeAndDate vcpSideId |
| C-PRODUCT-GROUP-MIB | cbr |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.1 | NodecbrDS1E1CardConfig | |||
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.1.1 | TablecbrDS1E1CardConfTable | not-accessible | mandatory | This object contains the CBR specific card Configuration table. There is one cbrDS1E1CardConfEntry associated for each provisioned CBR interface within the she… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.1.1.1 | RowcbrDS1E1CardConfEntry | not-accessible | mandatory | An entry in the CBR specific card Configuration table. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.1.1.1.1 | ColumncbrDS1E1CardRefPort | read-write | mandatory | This object indicates which port the receive clock may be selected as the system reference clock source. The value range starts at 1 and the maximum value is d… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.2 | NodecbrDS1E1PortConfig | |||
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.2.1 | TablecbrDS1E1PortConfTable | not-accessible | mandatory | This object contains the CBR specific port Configuration table. There is one cbrDS1E1PortConfEntry associated for each provisioned CBR port interface within th… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.2.1.1 | RowcbrDS1E1PortConfEntry | not-accessible | mandatory | An entry in the CBR specific port Configuration table. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.2.1.1.1 | ColumncbrDS1E1PortConfLBO | read-write | mandatory | This object is applicable to a T1-DSX CBR interface ONLY and indicates the associated Line Build Out configuration for the designated port. An error is returne… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.2.1.1.2 | ColumncbrDS1E1PortConfLineCode | read-write | mandatory | This object indicates the zero code suppression technique configured to the specified T1/E1 port interface. The bipolar with 8 zero substitution (B8ZS) techniq… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.2.1.1.3 | ColumncbrDS1E1PortConfPortMode | read-write | mandatory | This object indicates the type of service configured to the specified T1/E1 port interface. Unstructured allows the application to utilize the entire available… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.2.1.1.4 | ColumncbrDS1E1PortConfFraming | read-write | mandatory | This object indicates the type of frame organization configured for the specified T1/E1 port interface. D4 and ESF frame organizations apply to T1 interfaces O… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.2.1.1.5 | ColumncbrDS1E1PortConfTiming | read-write | mandatory | This object indicates the type of input clock service configured for the specified T1/E1 port interface. Synchronous Residual Time Stamp (SRTS) and Adaptive ti… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.2.1.1.6 | ColumncbrDS1E1PortConfSignaling | read-write | mandatory | This object is applicable to E1 interfaces ONLY and indicates if signaling information is enabled or disabled. Signaling information is always disabled in E1 s… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.2.1.1.7 | ColumncbrDS1E1PortConfCRC-4 | read-write | mandatory | This object is applicable to E1 interfaces ONLY and indicates if CRC-4 information is enabled or disabled. CRC-4 information is always disabled in E1 single-fr… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.2.1.1.8 | ColumncbrDS1E1PortConfDS0Channels | read-only | mandatory | This object indicates the associated DS0's which have been assigned to the specified physical port interface. All available DS0 channels are automatically allo… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.2.1.1.9 | ColumncbrDS1E1PortConfLoopBackType | read-write | mandatory | This object indicates the type of loopback configured for the specified T1/E1 port interface. Network-line (2) redirects incoming remote traffic back into the … |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.3 | NodecbrDS1E1VcConfig | |||
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.4 | NodecbrDS1E1ATMStats | |||
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.5 | NodecbrV35PortConfig | |||
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.6 | NodecbrDS1E1NewVcConfig | |||
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.6.1 | TablecbrDS1E1NewVcConfTable | not-accessible | mandatory | This object contains the CBR specific VC Configuration table. There is one cbrDS1E1VcConfEntry associated for each CBR VC connection provisioned within the she… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.6.1.1 | RowcbrDS1E1NewVcConfEntry | not-accessible | mandatory | An entry in the CBR specific VC Configuration table. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.6.1.1.1 | ColumncbrDS1E1NewVcConfCDVT | read-write | mandatory | This object indicates the Cell Delay Variation Tolerance (CDVT) in msecs configured for the specified T1/E1 ATM VC connection. The CDVT value specifies the amo… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.6.1.1.2 | ColumncbrDS1E1NewVcConfIntegPeriod | read-write | mandatory | This object indicates the Cell Loss Integration Period in msecs configured for the specified ATM VC connection. If cell(s) are lost within this period, the ATM… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.6.1.1.3 | ColumncbrDS1E1NewVcConfPayloadSize | read-only | mandatory | This object indicates the actual number of payload octets used per ATM cell size configured for the specified T1/E1 ATM VC connection. The default value is 47 … |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.6.1.1.4 | ColumncbrDS1E1NewVcConfPayloadType | read-only | mandatory | This object indicates which payload type has been configured for the specified T1/E1 ATM VC connection. It is reflective upon the T1/E1 port mode configuration… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.6.1.1.5 | ColumncbrDS1E1NewVcConfOnHookDetection | read-write | mandatory | This object dynamically reallocates bandwidth based upon the detection of an on-hook condition as specified by the signaling type. This object is applicable in… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.6.1.1.6 | ColumncbrDS1E1NewVcConfSignalingType | read-write | mandatory | This object indicates the associated signaling application type. This object defaults to no_signaling in unstructured/structured data modes and cannot be modif… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.6.1.1.7 | ColumncbrDS1E1NewVcConfDS0Channels | read-write | mandatory | This object indicates the associated DS0's which have been assigned to the specified ATM VC connection. All available DS0 channels are automatically allocated … |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.7 | NodecbrDS1E1NewATMStats | |||
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.7.1 | TablecbrDS1E1NewATMStatsTable | not-accessible | mandatory | This object contains the CBR specific VC Statistics table. There is one cbrDS1E1ATMStatsEntry associated for each CBR VC connection provisioned within the shel… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.7.1.1 | RowcbrDS1E1NewATMStatsEntry | not-accessible | mandatory | An entry in the CBR specific VC Statistics table. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.7.1.1.1 | ColumncbrDS1E1NewATMStatsRxCells | read-only | mandatory | This object indicates the total number of ATM cells received over the T1/E1 ATM VC connection since the last ATM VC clear time and date. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.7.1.1.2 | ColumncbrDS1E1NewATMStatsTxCells | read-only | mandatory | This object indicates the total number of ATM cells transmitted over the T1/E1 ATM VC connection since the last ATM VC clear time and date. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.7.1.1.3 | ColumncbrDS1E1NewATMStatsOOSErrors | read-only | mandatory | This object indicates the total number of out-of-sequence errors detected over the specified T1/E1 ATM VC connection since the last ATM VC clear time and date. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.7.1.1.4 | ColumncbrDS1E1NewATMStatsCRCErrors | read-only | mandatory | This object indicates the total number of CRC errors detected over the specified T1/E1 ATM VC connection since the last ATM VC clear time and date. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.7.1.1.5 | ColumncbrDS1E1NewATMStatsOAMRxCells | read-only | mandatory | This object indicates the total number of OAM cells received over the specified T1/E1 ATM VC connection since the last ATM VC clear time and date. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.7.1.1.6 | ColumncbrDS1E1NewATMStatsOAMTxCells | read-only | mandatory | This object indicates the total number of OAM cells transmitted over the specified T1/E1 ATM VC connection since the last ATM VC clear time and date. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.7.1.1.7 | ColumncbrDS1E1NewATMStatsClearStats | read-write | mandatory | This object will (1) clear the ATM statistics counters and (2) initialize the reset time and date to the current time and date for the specified ATM VC connect… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.7.1.1.8 | ColumncbrDS1E1NewATMStatsResetTimeDate | read-only | mandatory | This object indicates the last time and date the ATM statistics were cleared for the specified ATM VC connection. |