C-PRODUCT-CBR-V35-MIB
14 objects
No module-level DESCRIPTION found.
Imported Objects
| C-PRODUCT-BASE-MIB | portNumber portSlot |
| C-PRODUCT-GROUP-MIB | cbr |
| RFC-1212 | OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.5 | NodecbrV35PortConfig | |||
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.5.1 | TablecbrV35PortConfTable | not-accessible | mandatory | This object contains the CBR's V.35 specific port Configuration table. There is one cbrV35PortConfEntry associated for each provisioned CBR port interface with… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.5.1.1 | RowcbrV35PortConfEntry | not-accessible | mandatory | An entry in the CBR specific port Configuration table. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.5.1.1.1 | ColumncbrV35PortConfCableType | read-only | mandatory | This object indicates the type of cable connected to the port. An error is returned if an access is attempted on a physical interface other than a V.35 port in… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.5.1.1.2 | ColumncbrV35PortConfScrClockSource | read-write | mandatory | This object indicates the SCR clock source. This is aplicable for both DCE & DTE cable types. If the cable type is 'none', a get request returns whatever the v… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.5.1.1.3 | ColumncbrV35PortConfTxClockPhase | read-write | mandatory | This object indicates the type of Transmit clock phase needed to correct the clock out of phase problem. This is aplicable ONLY when a 'dte' cable is connected… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.5.1.1.4 | ColumncbrV35PortConfRts | read-only | mandatory | This object indicates RTS pin status. Default value is off (1). |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.5.1.1.5 | ColumncbrV35PortConfCts | read-only | mandatory | This object indicates CTS pin status. Default value is off (1). |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.5.1.1.6 | ColumncbrV35PortConfDcd | read-only | mandatory | This object indicates DCD pin status. Default value is off (1). |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.5.1.1.7 | ColumncbrV35PortConfDsr | read-only | mandatory | This object indicates DSR pin status. Default value is off (1). |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.5.1.1.8 | ColumncbrV35PortConfSctClockSource | read-write | mandatory | This object indicates the type of SCT clock source. This is aplicable for both 'DCE' & 'DTE' cable types. If no cable is attached then it just reflects the val… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.5.1.1.9 | ColumncbrV35PortConfRxTimingSource | read-write | mandatory | This object indicates the Serial interface Recieive Timing Source. The default value is dce-transmit-clock. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.5.1.1.10 | ColumncbrV35PortConfCableID | read-only | mandatory | This object indicates the type of physical interface. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.15.5.1.1.11 | ColumncbrV35PortConfLoopBackType | read-write | mandatory | This object indicates the type of loopback configured for the specified T1/E1 port interface. Network-line (2) redirects incoming remote traffic back into the … |