C-PRODUCT-DS3-MIB
29 objects
No module-level DESCRIPTION found.
Imported Objects
| C-PRODUCT-BASE-MIB | portNumber portSlot TimeAndDate |
| C-PRODUCT-GROUP-MIB | ds3card |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Gauge |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.2.1.1.1.1.11.1 | Nodeds3Port | |||
| 1.3.6.1.4.1.2011.2.1.1.1.1.11.1.1 | Tableds3PortTable | not-accessible | mandatory | The DS3 port information table. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.11.1.1.1 | Rowds3PortEntry | not-accessible | mandatory | Information about a DS3 port. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.11.1.1.1.1 | Columnds3PortLoopbackType | read-write | mandatory | Loopback type of the DS3 port. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.11.1.1.1.2 | Columnds3PortLboLength | read-write | mandatory | Cable length for the DS3 port. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.11.1.1.1.3 | Columnds3PortPeakRate | read-write | mandatory | Peak data transfer rate of the DS3 port. Unit: Mbps. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.11.1.1.1.4 | Columnds3PortFraming | read-write | mandatory | Cbit or M23 framing for the DS3 port. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.11.1.1.1.5 | Columnds3PortCellMap | read-write | mandatory | ATM cell mapping for the DS3 port. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.11.1.1.1.6 | Columnds3PortScramble | read-write | mandatory | ATM payload scrambling for the DS3 port. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.11.1.1.1.7 | Columnds3PortTiming | read-write | mandatory | DS3 timing source. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.11.1.1.1.8 | Columnds3PortPlcpTiming | read-write | mandatory | PLCP timing source for the DS3 port. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.11.1.1.1.9 | Columnds3PortCtxTiming | read-write | mandatory | CTX timing source from the DS3 port. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.11.1.1.1.10 | Columnds3PortFeacLoopback | read-write | mandatory | FEAC loopback for the DS3 port. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.11.1.1.1.11 | Columnds3PortLineRate | read-only | mandatory | Physical Line data transfer rate of the DS3 port. Unit: CPS. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.11.2 | Nodeds3PortStats | |||
| 1.3.6.1.4.1.2011.2.1.1.1.1.11.2.1 | Tableds3PortStatsTable | not-accessible | mandatory | The DS3 port stats information table. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.11.2.1.1 | Rowds3PortStatsEntry | not-accessible | mandatory | Information about a DS3 port stats. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.11.2.1.1.1 | Columnds3PortRxCells | read-only | mandatory | The counter associated with the received cells, encountered on the ATM interface. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.11.2.1.1.2 | Columnds3PortTxCells | read-only | mandatory | The counter associated with the transmitted cells, encountered on the ATM interface. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.11.2.1.1.3 | Columnds3PortIdleUnassignedCells | read-only | mandatory | The counter associated with the idle/unassigned cells, encountered on the ATM interface. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.11.2.1.1.4 | Columnds3PortHCSErrorCells | read-only | mandatory | The counter associated with the HCS errored cells, encountered on the ATM interface. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.11.2.1.1.5 | Columnds3PortResetTimeDate | read-only | mandatory | The reset time and date of ATM stats on this ATM interface. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.11.2.1.1.6 | Columnds3PortResetStats | write-only | mandatory | This field is used to reset the atm statistics for the ds3 port. If a get is performed on this command, the result will always be zero |
| 1.3.6.1.4.1.2011.2.1.1.1.1.11.2.1.1.7 | Columnds3PortUtilRxCells | read-only | mandatory | The Utilization of received Cell is calculated as received cells divided by Line Rate. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.11.2.1.1.8 | Columnds3PortUtilTxCells | read-only | mandatory | The Utilization of transmitted Cell is calculated as transmitted cells divided by Line Rate. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.11.3 | Nodeds3PortClearStats | |||
| 1.3.6.1.4.1.2011.2.1.1.1.1.11.3.1 | Tableds3PortClearStatsTable | not-accessible | mandatory | This table is used to reset the performance monitoring data for ds3 port. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.11.3.1.1 | Rowds3PortClearStatsEntry | not-accessible | mandatory | Information about a DS3 port. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.11.3.1.1.1 | Columnds3PortResetPMData | write-only | mandatory | This field is used to reset the performance monitoring data for the ds3 port. If a get is performed on this command, the result will always be zero |