C-PRODUCT-E3-MIB
26 objects
No module-level DESCRIPTION found.
Imported Objects
| C-PRODUCT-BASE-MIB | portNumber portSlot TimeAndDate |
| C-PRODUCT-GROUP-MIB | e3card |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Gauge |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.2.1.1.1.1.13.1 | Nodee3Port | |||
| 1.3.6.1.4.1.2011.2.1.1.1.1.13.1.1 | Tablee3PortTable | not-accessible | mandatory | The E3 port information table. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.13.1.1.1 | Rowe3PortEntry | not-accessible | mandatory | Information about a E3 port. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.13.1.1.1.1 | Columne3PortLoopbackType | read-write | mandatory | Loopback type of the E3 port. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.13.1.1.1.2 | Columne3PortPeakRate | read-write | mandatory | Peak data transfer rate of the E3 port. Unit: Mbps. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.13.1.1.1.3 | Columne3PortCellMap | read-write | mandatory | ATM cell mapping for the E3 port. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.13.1.1.1.4 | Columne3PortScramble | read-write | mandatory | ATM payload scrambling for the E3 port. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.13.1.1.1.5 | Columne3PortTiming | read-write | mandatory | E3 timing source. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.13.1.1.1.6 | Columne3PortPlcpTiming | read-write | mandatory | PLCP timing source for the E3 port. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.13.1.1.1.7 | Columne3PortCtxTiming | read-write | mandatory | CTX timing source for the E3 port. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.13.1.1.1.8 | Columne3PortLineRate | read-only | mandatory | Physical Line data transfer rate of the E3 port. Unit: CPS. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.13.2 | Nodee3PortStats | |||
| 1.3.6.1.4.1.2011.2.1.1.1.1.13.2.1 | Tablee3PortStatsTable | not-accessible | mandatory | The E3 port stats information table. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.13.2.1.1 | Rowe3PortStatsEntry | not-accessible | mandatory | Information about a E3 port stats. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.13.2.1.1.1 | Columne3PortRxCells | read-only | mandatory | The counter associated with the received cells, encountered on the ATM interface. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.13.2.1.1.2 | Columne3PortTxCells | read-only | mandatory | The counter associated with the transmitted cells, encountered on the ATM interface. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.13.2.1.1.3 | Columne3PortIdleUnassignedCells | read-only | mandatory | The counter associated with the idle/unassigned cells, encountered on the ATM interface. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.13.2.1.1.4 | Columne3PortHCSErrorCells | read-only | mandatory | The counter associated with the HCS errored cells, encountered on the ATM interface. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.13.2.1.1.5 | Columne3PortResetTimeDate | read-only | mandatory | The reset time and date of ATM stats on this ATM interface. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.13.2.1.1.6 | Columne3PortResetStats | write-only | mandatory | This field is used to reset the atm statistics for the e3 port. If a get is performed on this command, the result will always be zero |
| 1.3.6.1.4.1.2011.2.1.1.1.1.13.2.1.1.7 | Columne3PortUtilRxCells | read-only | mandatory | The Utilization of received Cell is calculcated as received cells divided by Line Rate. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.13.2.1.1.8 | Columne3PortUtilTxCells | read-only | mandatory | The Utilization of transmitted Cell is calculcated as transmitted cells divided by Line Rate. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.13.3 | Nodee3PortClearStats | |||
| 1.3.6.1.4.1.2011.2.1.1.1.1.13.3.1 | Tablee3PortClearStatsTable | not-accessible | mandatory | The E3 reset statistics for peformance monitoring data. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.13.3.1.1 | Rowe3PortClearStatsEntry | not-accessible | mandatory | Information about E3 port reset performance monitoring. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.13.3.1.1.1 | Columne3PortResetPMData | write-only | mandatory | This field is used to reset the performance monitoring data for the e3 port. If a get is performed on this command, the result will always be zero |