C-PRODUCT-ETHER-MIB
81 objects
No module-level DESCRIPTION found.
Imported Objects
| C-PRODUCT-BASE-MIB | portNumber portSlot TimeAndDate vcpSideId |
| C-PRODUCT-GROUP-MIB | enetcard |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter |
| RFC1213-MIB | PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.1 | Nodebridge | |||
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.1.1 | ScalarbrAgeTime | read-write | mandatory | The time in minute for a bridging entry to be aged out. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.1.2 | TablebrFilterFlagTable | not-accessible | mandatory | Contain the flags to individually enable/disable these different types of filtering: Source protocol, Source Address, and Destination Address . |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.1.2.1 | RowbrFilterFlagEntry | not-accessible | mandatory | Each entry in the table contains the information of a currently filtering setup for a port. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.1.2.1.1 | ColumnbrFilterFlagSrcProt | read-write | mandatory | To enable/disable source protocol filtering. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.1.2.1.2 | ColumnbrFilterFlagSrcAddr | read-write | mandatory | To enable/disable source address filtering. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.1.2.1.3 | ColumnbrFilterFlagDstAddr | read-write | mandatory | To enable/disable source address filtering. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.1.2.1.4 | ColumnbrFilterFlagIP | read-write | mandatory | To enable/disable IP protocol filtering. This object is used when source protocol filtering is enabled. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.1.2.1.5 | ColumnbrFilterFlagIPX | read-write | mandatory | To enable/disable IPX protocol filtering. This object is used when source protocol filtering is enabled. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.1.2.1.6 | ColumnbrFilterFlagDecnet | read-write | mandatory | To enable/disable DECNET protocol filtering. This object is used when source protocol filtering is enabled. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.1.3 | TablebrFilterSrcAddrTable | not-accessible | mandatory | Contain all source addresses used for source address filtering. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.1.3.1 | RowbrFilterSrcAddrEntry | not-accessible | mandatory | Each entry in the table contains a source address used for source address filtering. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.1.3.1.1 | ColumnbrFilterSrcAddr | read-only | mandatory | If the source address in an MAC frame matches this value, the frame will be filtered. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.1.3.1.2 | ColumnbrFilterSrcAddrAct | read-write | mandatory | This object is used for entry creation and deletion. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.1.4 | TablebrFilterDstAddrTable | not-accessible | mandatory | Contain all destination addresses used for destination address filtering. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.1.4.1 | RowbrFilterDstAddrEntry | not-accessible | mandatory | Each entry in the table contains a destination address used for destination address filtering. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.1.4.1.1 | ColumnbrFilterDstAddr | read-only | mandatory | If the destination address in an MAC frame matches this value, the frame will be filtered. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.1.4.1.2 | ColumnbrFilterDstAddrAct | read-write | mandatory | This object is used for entry creation and deletion. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.1.5 | TablebrStaticTable | not-accessible | mandatory | Contain all static addresses attached to each port. The entry is used for forwarding. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.1.5.1 | RowbrStaticEntry | not-accessible | mandatory | Each entry in the table contains a station address used for forwarding. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.1.5.1.1 | ColumnbrStaticAddr | read-only | mandatory | If the destination address in an MAC frame matches this value, the frame will be forwarded to destination specified by destination port or ATM VC. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.1.5.1.2 | ColumnbrStaticDstSlot | read-write | mandatory | The slot number to which this address is destined. If use VC, this object should be set to 0. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.1.5.1.3 | ColumnbrStaticDstPort | read-write | mandatory | The port number to which this address is destined. If use slot/port, this object is ignored. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.1.5.1.4 | ColumnbrStaticDstTxVpi | read-write | mandatory | The Tx VP number to which this address is destined. If use slot/port, this object is ignored. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.1.5.1.5 | ColumnbrStaticDstTxVci | read-write | mandatory | The Tx VC number to which this address is destined. If use slot/port, this object is ignored. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.1.5.1.6 | ColumnbrStaticDstRxVpi | read-write | mandatory | The Rx VP number to which this address is destined. If use slot/port, this object is ignored. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.1.5.1.7 | ColumnbrStaticDstRxVci | read-write | mandatory | The Rx VC number to which this address is destined. If use slot/port, this object is ignored. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.1.5.1.8 | ColumnbrStaticAddrAct | read-write | mandatory | This object is used for entry creation and deletion. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.1.6 | TablebrFdbTable | not-accessible | mandatory | A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the trans… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.1.6.1 | RowbrFdbEntry | not-accessible | mandatory | Information about a specific unicast MAC address for which the bridge has some forwarding and/or filtering information. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.1.6.1.1 | ColumnbrFdbAddress | read-only | mandatory | A unicast MAC address for which the bridge has forwarding and/or filtering information. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.1.6.1.2 | ColumnbrFdbDstTxVpi | read-only | mandatory | The Tx VP number to which this address is destined. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.1.6.1.3 | ColumnbrFdbDstTxVci | read-only | mandatory | The Tx VC number to which this address is destined. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.1.6.1.4 | ColumnbrFdbDstRxVpi | read-only | mandatory | The Rx VP number to which this address is destined. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.1.6.1.5 | ColumnbrFdbDstRxVci | read-only | mandatory | The Rx VC number to which this address is destined. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.1.6.1.6 | ColumnbrFdbStatus | read-only | mandatory | The status of this entry. The meanings of the values are: other(1) : none of the following. This would include the case where some other MIB object (not the co… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.1.6.1.7 | ColumnbrFdbAge | read-only | mandatory | Age of this forwarding table entry. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.2 | NodephyPort | |||
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.2.1 | TableportTable | not-accessible | mandatory | The port information table. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.2.1.1 | RowportEntry | not-accessible | mandatory | Information about a port. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.2.1.1.1 | ColumnportMaxInfo | read-only | mandatory | The maximum size of the INFO (non-MAC) field that this port will receive or transmit. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.2.1.1.2 | ColumnportInFrames | read-only | mandatory | The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only coun… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.2.1.1.3 | ColumnportOutFrames | read-only | mandatory | The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only … |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.2.1.1.4 | ColumnportFramesForwarded | read-only | mandatory | Number of incoming frames at this port that were forwarded. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.2.1.1.5 | ColumnportBroadcastFrames | read-only | mandatory | Number of broadcast frames received on port |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.2.1.1.6 | ColumnportNumFramesFlooded | read-only | mandatory | Total number of incoming frames on this port that were flooded |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.2.1.1.7 | ColumnportNumFramesDiscarded | read-only | mandatory | Count of valid frames received which were discarded (i.e., filtered) by the Forwarding Process. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.2.1.1.8 | ColumnportMaxMTUexceededFrames | read-only | mandatory | Number of frames discarded because of size greater than maximum MTU size for the port |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.2.1.1.9 | ColumnportNoATMvcDiscards | read-only | mandatory | Number of frames discarded because there was no ATM VC associated with this physical port |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.2.1.1.10 | ColumnportBridgeDiscards | read-only | mandatory | Number of frames discarded because of bridging operation |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.2.1.1.11 | ColumnportOutPortDisabledDiscards | read-only | mandatory | Number of frames filtered because the output port was disabled |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.2.1.1.12 | ColumnportSrcAddressDiscards | read-only | mandatory | Number of frames filtered because of source address filtering |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.2.1.1.13 | ColumnportDestAddressDiscards | read-only | mandatory | Number of frames filtered because of destination address filtering |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.2.1.1.14 | ColumnportSAPfilterDiscards | read-only | mandatory | Number of frames filtered because of protocol filtering operation |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.2.1.1.15 | ColumnportLearnedEntryDiscards | read-only | mandatory | The number of frames that were discarded because there was no storage memory available |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.2.1.1.16 | ColumnportStatsClearStats | read-write | mandatory | This object will (1) clear the ATM statistics counters and (2) initialize the reset time and date to the current time and date for the specified port. NOTE: A … |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.2.1.1.17 | ColumnportStatsResetTimeDate | read-only | mandatory | This object indicates the last time and date the ATM statistics were cleared for the specified port. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.2.1.1.18 | ColumnportMacAddress | read-only | mandatory | This is mac address of ethernet port. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.2.1.1.19 | ColumnportFramesTransmitted | read-only | mandatory | Total number of frames transmitted at this port. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.3 | NodeipOverAtm | |||
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.4 | NodeenetCircuit | |||
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.4.2 | TablevcpTable | not-accessible | mandatory | The virtual circuit information table. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.4.2.1 | RowvcpEntry | not-accessible | mandatory | Information about a virtual circuits. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.4.2.1.1 | ColumnvcpMaxInfo | read-only | mandatory | The maximum size of the INFO (non-MAC) field that this vcp will receive or transmit. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.4.2.1.2 | ColumnvcpInFrames | read-only | mandatory | The number of frames that have been received by this vcp from its segment. Note that a frame received on the interface corresponding to this vcp is only counte… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.4.2.1.3 | ColumnvcpOutFrames | read-only | mandatory | The number of frames that have been transmitted by this vcp to its segment. Note that a frame transmitted on the interface corresponding to this vcp is only co… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.4.2.1.4 | ColumnvcpFramesForwarded | read-only | mandatory | Number of incoming frames at this vcp that were forwarded. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.4.2.1.5 | ColumnvcpBroadcastFrames | read-only | mandatory | Number of broadcast frames received on vcp |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.4.2.1.6 | ColumnvcpNumFramesFlooded | read-only | mandatory | Total number of incoming frames on this vcp that were flooded |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.4.2.1.7 | ColumnvcpNumFramesDiscarded | read-only | mandatory | Count of valid frames received which were discarded (i.e., filtered) by the Forwarding Process. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.4.2.1.8 | ColumnvcpMaxMTUexceededFrames | read-only | mandatory | Number of frames discarded because of size greater than maximum MTU size for the vcp |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.4.2.1.9 | ColumnvcpBridgeDiscards | read-only | mandatory | Number of frames discarded because of bridging operation |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.4.2.1.10 | ColumnvcpOutPortDisabledDiscards | read-only | mandatory | Number of frames filtered because the output port was disabled |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.4.2.1.11 | ColumnvcpSrcAddressDiscards | read-only | mandatory | Number of frames filtered because of source address filtering |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.4.2.1.12 | ColumnvcpDestAddressDiscards | read-only | mandatory | Number of frames filtered because of destination address filtering |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.4.2.1.13 | ColumnvcpSAPfilterDiscards | read-only | mandatory | Number of frames filtered because of protocol filtering operation |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.4.2.1.14 | ColumnvcpLearnedEntryDiscards | read-only | mandatory | The number of frames that were discarded because there was no storage memory available |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.4.2.1.15 | ColumnvcpStatsClearStats | read-write | mandatory | This object will (1) clear the ATM statistics counters and (2) initialize the reset time and date to the current time and date for the specified ATM VC connect… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.4.2.1.16 | ColumnvcpStatsResetTimeDate | read-only | mandatory | This object indicates the last time and date the ATM statistics were cleared for the specified ATM VC connection. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.4.2.1.17 | ColumnvcpTransmitQueueAveRate | read-write | mandatory | This field specifies the average rate of transmit queue |
| 1.3.6.1.4.1.2011.2.1.1.1.1.17.4.2.1.18 | ColumnvcpNumFramesTransmitted | read-only | mandatory | Total number of frames transmitted at this vcp. |