CADANT-AAA-MIB
135 objects
The MIB module describes the proprietary AAA configuration parameters used to support authentication and authorization in the C4.
Imported Objects
| CADANT-PRODUCTS-MIB | cadAuthentication |
| CADANT-TC | AAAmethod AccountingType InetAddressIPv4or6 LineType SshAuthMethod SshCipher SshCipherType SshKeyExchangeMethod SshKeyType SshMacAlg SshProtocol SshService |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4998.1.1.40.1 | IdentitycadAAA | The MIB module describes the proprietary AAA configuration parameters used to support authentication and authorization in the C4. | ||
| 1.3.6.1.4.1.4998.1.1.40.1.2 | TablecadLineTable | not-accessible | current | This table reflects the AAA configuration for each line (vty or console) in the system. |
| 1.3.6.1.4.1.4998.1.1.40.1.2.1 | RowcadLineEntry | not-accessible | current | |
| 1.3.6.1.4.1.4998.1.1.40.1.2.1.1 | ColumncadLineIndex | not-accessible | current | The line index corresponding to a console or vty line. These are preallocated by the system at startup. |
| 1.3.6.1.4.1.4998.1.1.40.1.2.1.2 | ColumncadLineType | read-only | current | The type (vty or console) of the access line. |
| 1.3.6.1.4.1.4998.1.1.40.1.2.1.3 | ColumncadLineEnabled | read-only | current | The status of the line. When enabled, the line is available for access to the C4. |
| 1.3.6.1.4.1.4998.1.1.40.1.2.1.4 | ColumncadLineSessionTimeout | read-only | current | Session length in seconds. The C4 automatically terminates the the session when this interval expires. A value of zero indicates no timeout. |
| 1.3.6.1.4.1.4998.1.1.40.1.2.1.5 | ColumncadLineIdleTimeout | read-only | current | Maximum idle time in seconds. The C4 automatically terminates the session if no I/O activity occurs within this interval. A value of zero indicates no timeout. |
| 1.3.6.1.4.1.4998.1.1.40.1.2.1.6 | ColumncadLinePagination | read-only | current | Number of lines of consecutive output to display before pausing and prompting the user. A value of zero indicates no pagination. |
| 1.3.6.1.4.1.4998.1.1.40.1.2.1.7 | ColumncadLineBaud | read-only | current | Baud rate in bits per second. This is applicable to console lines only and is saved in the eeprom. |
| 1.3.6.1.4.1.4998.1.1.40.1.2.1.8 | ColumncadLinePassword | read-only | current | The (encrypted) password associated with this line if line-based authentication is active. This is the line password. |
| 1.3.6.1.4.1.4998.1.1.40.1.2.1.9 | ColumncadLineLoginAuthMethodList | read-only | current | The authentication methods used in allowing login access on this line. This is a partial index into the cadAuthMethodTable. An empty string indicates no authen… |
| 1.3.6.1.4.1.4998.1.1.40.1.2.1.10 | ColumncadLineEnableAuthMethodList | read-only | current | The authentication methods used in allowing enable access on this line. This is a partial index into the cadAuthMethodTable. An empty string indicates no authe… |
| 1.3.6.1.4.1.4998.1.1.40.1.2.1.11 | ColumncadLineAuthorMethodList | read-only | current | The authorization methods used in allowing different privledge levels on this line. This is a partial index into the cadAuthorMethodTable. An empty string indi… |
| 1.3.6.1.4.1.4998.1.1.40.1.2.1.12 | ColumncadLineShellAccountingMethodList | read-only | current | The method list used for shell accounting. An empty string indicates no command accounting is possible. |
| 1.3.6.1.4.1.4998.1.1.40.1.2.1.13 | ColumncadLineCommandAccountingMethodList | read-only | current | The method list used for command accounting. Accounting will be done only for commands whose privilege level is greater than or equal to cadLineCommandAccounti… |
| 1.3.6.1.4.1.4998.1.1.40.1.2.1.14 | ColumncadLineShellAccountingType | read-only | current | Accounting type for shell accounting. The accounting type is used to decide whether accounting records are sent at the initiation and termination of a session … |
| 1.3.6.1.4.1.4998.1.1.40.1.2.1.15 | ColumncadLineCommandAccountingType | read-only | current | Accounting type for command accounting. The accounting type is used to decide whether accounting records are sent at the initiation and termination of a comman… |
| 1.3.6.1.4.1.4998.1.1.40.1.2.1.16 | ColumncadLineCommandAccountingPrivilegeLevel | read-only | current | When command accounting is enabled, accounting records will be sent only for commands whose privilege level is greater than or equal to cadLineCommandAccountin… |
| 1.3.6.1.4.1.4998.1.1.40.1.3 | TablecadAuthorizationMethodTable | not-accessible | current | A list of methods which are used in determining the type and sequence of authorization. |
| 1.3.6.1.4.1.4998.1.1.40.1.3.1 | RowcadAuthorizationMethodEntry | not-accessible | current | Each row describes a single AAA method. Order is used in determining the sequence in which the methods are applied. |
| 1.3.6.1.4.1.4998.1.1.40.1.3.1.1 | ColumncadAuthorizationListName | not-accessible | current | The name of the authorization method list. Each list can have a number of different authorization methods that are tried in order to authorize the command. |
| 1.3.6.1.4.1.4998.1.1.40.1.3.1.2 | ColumncadAuthorizationListIndex | not-accessible | current | The order in the authorization sequence when this method is used. A value of zero allows the snmp agent to choose the next hightest available index that preser… |
| 1.3.6.1.4.1.4998.1.1.40.1.3.1.3 | ColumncadAuthorizationType | read-only | current | |
| 1.3.6.1.4.1.4998.1.1.40.1.3.1.4 | ColumncadAuthorizationGroup | read-only | current | The name of the group used in TACACS+ method. The default names of 'tac_default' represent the entire set of defined TACACS+ servers. |
| 1.3.6.1.4.1.4998.1.1.40.1.3.1.5 | ColumncadAuthorizationRowStatus | read-only | current | |
| 1.3.6.1.4.1.4998.1.1.40.1.4 | TablecadAuthMethodTable | not-accessible | current | A list of methods which are used in determining the type and sequence of authentication. |
| 1.3.6.1.4.1.4998.1.1.40.1.4.1 | RowcadAuthMethodEntry | not-accessible | current | Each row describes a single AAA method. Order is used in determining the sequence in which the methods are applied. |
| 1.3.6.1.4.1.4998.1.1.40.1.4.1.1 | ColumncadAuthListName | not-accessible | current | The name of the authentication method list. Each list can have a number of different authentication methods that are tried in order to authenticate the user. |
| 1.3.6.1.4.1.4998.1.1.40.1.4.1.2 | ColumncadAuthListIndex | not-accessible | current | The order in the authentication sequence when this method is used. A value of zero allows the snmp agent to choose the next hightest available index that prese… |
| 1.3.6.1.4.1.4998.1.1.40.1.4.1.3 | ColumncadAuthType | read-only | current | |
| 1.3.6.1.4.1.4998.1.1.40.1.4.1.4 | ColumncadAuthGroup | read-only | current | The name of the group used in RADIUS/TACACS+ methods. The default names of 'default' and 'tac_default' represent the entire set of defined RADIUS and TACACS+ s… |
| 1.3.6.1.4.1.4998.1.1.40.1.4.1.5 | ColumncadAuthRowStatus | read-only | current | |
| 1.3.6.1.4.1.4998.1.1.40.1.5 | TablecadAccountingMethodTable | not-accessible | current | A list of methods which are used in determining the type and sequence of accounting. |
| 1.3.6.1.4.1.4998.1.1.40.1.5.1 | RowcadAccountingMethodEntry | not-accessible | current | Each row describes a single AAA method. Order is used in determining the sequence in which the methods are applied. |
| 1.3.6.1.4.1.4998.1.1.40.1.5.1.1 | ColumncadAccountingListName | not-accessible | current | The name of the accounting method list. Each list can have a number of different accounting methods that are tried in order to authorize the command. |
| 1.3.6.1.4.1.4998.1.1.40.1.5.1.2 | ColumncadAccountingListIndex | not-accessible | current | The order in the accounting sequence when this method is used. A value of zero allows the snmp agent to choose the next hightest available index that preserves… |
| 1.3.6.1.4.1.4998.1.1.40.1.5.1.3 | ColumncadAccountingType | read-create | current | |
| 1.3.6.1.4.1.4998.1.1.40.1.5.1.4 | ColumncadAccountingGroup | read-only | current | The name of the group used in TACACS+ method. The default names of 'tac_default' represent the entire set of defined TACACS+ servers. |
| 1.3.6.1.4.1.4998.1.1.40.1.5.1.5 | ColumncadAccountingRowStatus | read-only | current | |
| 1.3.6.1.4.1.4998.1.1.40.1.6 | TablecadServerGroupTable | not-accessible | current | |
| 1.3.6.1.4.1.4998.1.1.40.1.6.1 | RowcadServerGroupEntry | not-accessible | current | This is the cross-reference table linking server group names used in authentication lists to the ordered set of individual servers. |
| 1.3.6.1.4.1.4998.1.1.40.1.6.1.1 | ColumncadGroupName | not-accessible | current | Server Group name. The group name 'radius' includes all defined radius servers on the C4. |
| 1.3.6.1.4.1.4998.1.1.40.1.6.1.2 | ColumncadGroupIndex | not-accessible | current | Orders the group based on the order in which the servers were defined. A value of zero allows the snmp agent to choose the next largest available index that pr… |
| 1.3.6.1.4.1.4998.1.1.40.1.6.1.3 | ColumncadGroupType | read-only | current | Orders the group based on the order in which the servers were defined. |
| 1.3.6.1.4.1.4998.1.1.40.1.6.1.4 | ColumncadGroupIpAddress | read-only | current | Ip address of the AAA server. |
| 1.3.6.1.4.1.4998.1.1.40.1.6.1.5 | ColumncadGroupPort | read-only | current | Port number of the AAA server. |
| 1.3.6.1.4.1.4998.1.1.40.1.6.1.6 | ColumncadGroupRowStatus | read-only | current | |
| 1.3.6.1.4.1.4998.1.1.40.1.7 | TablecadRadiusTable | not-accessible | current | This table defines the configuration parameters of the RADIUS servers used for authentication by the C4. |
| 1.3.6.1.4.1.4998.1.1.40.1.7.1 | RowcadRadiusEntry | not-accessible | current | |
| 1.3.6.1.4.1.4998.1.1.40.1.7.1.1 | ColumncadRadiusIpAddress | not-accessible | current | The IP address of the radius server host. |
| 1.3.6.1.4.1.4998.1.1.40.1.7.1.2 | ColumncadRadiusAuthPort | read-only | current | The UDP port to use for RADIUS authentication. |
| 1.3.6.1.4.1.4998.1.1.40.1.7.1.3 | ColumncadRadiusAcctPort | read-only | current | The UDP port to use for RADIUS accounting records. |
| 1.3.6.1.4.1.4998.1.1.40.1.7.1.4 | ColumncadRadiusTimeout | read-only | current | Time in seconds to wait between retransmissions of a RADIUS request. |
| 1.3.6.1.4.1.4998.1.1.40.1.7.1.5 | ColumncadRadiusRetrans | read-only | current | The number of retransmissions before declaring a RADIUS server dead. |
| 1.3.6.1.4.1.4998.1.1.40.1.7.1.7 | ColumncadRadiusKey | read-only | current | The shared secret used between the C4 and the RADIUS server. |
| 1.3.6.1.4.1.4998.1.1.40.1.7.1.8 | ColumncadRadiusAuthServerIndex | read-only | current | The index in the radiusAuthServerEntry table corresponding to this radius host. |
| 1.3.6.1.4.1.4998.1.1.40.1.7.1.9 | ColumncadRadiusRowStatus | read-only | current | |
| 1.3.6.1.4.1.4998.1.1.40.1.8 | TablecadTacacsTable | not-accessible | current | This table defines the configuration parameters of the TACACS+ servers used by the C4. |
| 1.3.6.1.4.1.4998.1.1.40.1.8.1 | RowcadTacacsEntry | not-accessible | current | |
| 1.3.6.1.4.1.4998.1.1.40.1.8.1.1 | ColumncadTacacsIpAddress | not-accessible | current | The IP address of the TACACS+ server host. |
| 1.3.6.1.4.1.4998.1.1.40.1.8.1.2 | ColumncadTacacsPort | read-only | current | The TCP port to use for TACACS+ authentication. |
| 1.3.6.1.4.1.4998.1.1.40.1.8.1.3 | ColumncadTacacsTimeout | read-only | current | Time in seconds before TCP times out. |
| 1.3.6.1.4.1.4998.1.1.40.1.8.1.4 | ColumncadTacacsKey | read-only | current | The shared secret used between the C4 and the TACACS+ server. |
| 1.3.6.1.4.1.4998.1.1.40.1.8.1.5 | ColumncadTacacsSingleConnect | read-only | current | Indicates whether this TACACS+ server will support multiplexing of multiple sessions over a single TCP connection. |
| 1.3.6.1.4.1.4998.1.1.40.1.8.1.6 | ColumncadTacacsServerIndex | read-only | current | The index in the tacacsServerEntry table corresponding to this tacacs host. |
| 1.3.6.1.4.1.4998.1.1.40.1.8.1.7 | ColumncadTacacsRowStatus | read-only | current | |
| 1.3.6.1.4.1.4998.1.1.40.1.9 | NodecadSshConfig | |||
| 1.3.6.1.4.1.4998.1.1.40.1.9.1 | ScalarcadSshEnabled | read-only | current | The current adminstative status of the SSH server. True implies the SSH server is active. |
| 1.3.6.1.4.1.4998.1.1.40.1.9.2 | ScalarcadSshPort | read-only | current | Port on which the SSH server listens. |
| 1.3.6.1.4.1.4998.1.1.40.1.9.3 | ScalarcadSshSessionIdleTimeout | read-only | current | Seconds the SSH server will allow an established connection to remain idle connection before terminating it. 0 implies an unlimited idle timeout. |
| 1.3.6.1.4.1.4998.1.1.40.1.9.4 | ScalarcadSshMaxClients | read-only | current | Maximum number of active SSH clients allowed by the SSH server. 0 implies the upper range of 20. |
| 1.3.6.1.4.1.4998.1.1.40.1.9.5 | ScalarcadSshPasswordAuthEnabled | read-only | current | True means that password authentication is allowed by the SSH server. False implies that public key authentication must be allowed. Setting this object fo fals… |
| 1.3.6.1.4.1.4998.1.1.40.1.9.6 | ScalarcadSshPublicKeyAuthEnabled | read-only | current | When true, the SSH server will allow clients to authenticate using a digital signature. If false, password authentication must be allowed. Setting this object … |
| 1.3.6.1.4.1.4998.1.1.40.1.9.7 | ScalarcadSshCliLoginEnabled | read-only | current | When true, the SSH server will allow clients to login into the CLI. |
| 1.3.6.1.4.1.4998.1.1.40.1.9.8 | ScalarcadSshSecureFtpEnabled | read-only | current | When true, the SSH server will allow clients to establish secure ftp sessions. |
| 1.3.6.1.4.1.4998.1.1.40.1.9.11 | ScalarcadSshPublicKey | read-only | current | The SSH server's public key. |
| 1.3.6.1.4.1.4998.1.1.40.1.9.12 | ScalarcadSshPrivateKey | read-only | current | The SSH server private key |
| 1.3.6.1.4.1.4998.1.1.40.1.9.13 | ScalarcadSshCiphers | read-only | current | SSH message encryption ciphers |
| 1.3.6.1.4.1.4998.1.1.40.1.9.14 | ScalarcadSshPortForwardingEnabled | read-only | current | Set this object to true(1) if SSH port forwarding is to be enabled. Otherwise, this object should be false(2) if SSH port forwarding is disabled. |
| 1.3.6.1.4.1.4998.1.1.40.1.9.15 | ScalarcadSshPasswordAuthRequired | read-only | current | If cadSshPasswordAuthEnabled is set to true(1), then setting cadSshPasswordAuthRequired to true(1) instructs the SSH server to require password authentication … |
| 1.3.6.1.4.1.4998.1.1.40.1.9.16 | ScalarcadSshPublicKeyAuthRequired | read-only | current | If cadSshPublicKeyAuthEnabled is set to true(1), then setting cadSshPublicKeyAuthRequired to true(1) instructs the SSH server to require public key authenticat… |
| 1.3.6.1.4.1.4998.1.1.40.1.9.17 | ScalarcadSshPublicKeyAuthFirst | read-only | current | If both cadSshPublicKeyAuthEnabled and cadSshPublicKeyAuthRequired are set to true(1), then this object may set to true(1). Otherwise, attempts to set this obj… |
| 1.3.6.1.4.1.4998.1.1.40.1.9.18 | ScalarcadSshMaxAuthFailures | read-only | current | The SSH server will reject clients who fail to authorize after this many attempts. |
| 1.3.6.1.4.1.4998.1.1.40.1.9.19 | ScalarcadSshServerKeyType | read-only | current | The SSH server key type (DSA-1024 or RSA-2048). |
| 1.3.6.1.4.1.4998.1.1.40.1.9.20 | ScalarcadSshKeyExchange | read-only | current | The SSH server key exhange method. |
| 1.3.6.1.4.1.4998.1.1.40.1.10 | TablecadPasswordTable | not-accessible | current | This table reflects the local user passwords defined for the C4. |
| 1.3.6.1.4.1.4998.1.1.40.1.10.1 | RowcadPasswordEntry | not-accessible | current | |
| 1.3.6.1.4.1.4998.1.1.40.1.10.1.1 | ColumncadPassUser | not-accessible | current | Local user name defined on the C4. |
| 1.3.6.1.4.1.4998.1.1.40.1.10.1.2 | ColumncadPassPassword | read-only | current | Encrypted password for local user defined on the C4. |
| 1.3.6.1.4.1.4998.1.1.40.1.10.1.3 | ColumncadPassAuthLevel | read-only | current | Authorization level for this user account. |
| 1.3.6.1.4.1.4998.1.1.40.1.10.1.4 | ColumncadPassPublicKey | read-only | current | User's public key for use by SSH |
| 1.3.6.1.4.1.4998.1.1.40.1.10.1.5 | ColumncadPassRowStatus | read-only | current | |
| 1.3.6.1.4.1.4998.1.1.40.1.11 | TablecadEnablePasswordTable | not-accessible | current | This table reflects the local enable passwords defined for various privilege levels. |
| 1.3.6.1.4.1.4998.1.1.40.1.11.1 | RowcadEnablePasswordEntry | not-accessible | current | |
| 1.3.6.1.4.1.4998.1.1.40.1.11.1.1 | ColumncadPrivilegeLevel | not-accessible | current | Privilege level. |
| 1.3.6.1.4.1.4998.1.1.40.1.11.1.2 | ColumncadEnablePassword | read-only | current | Encrypted enable password associated with the privilege level. |
| 1.3.6.1.4.1.4998.1.1.40.1.11.1.3 | ColumncadEnablePasswordRowStatus | read-only | current | |
| 1.3.6.1.4.1.4998.1.1.40.1.12 | NodecadCLIcommandPrivilegeLevelTable | |||
| 1.3.6.1.4.1.4998.1.1.40.1.13 | NodecadSshStatus | |||
| 1.3.6.1.4.1.4998.1.1.40.1.13.1 | ScalarcadSshServerVersion | read-only | current | The current version information for this C4 SSH server. |
| 1.3.6.1.4.1.4998.1.1.40.1.13.2 | ScalarcadSshOfferedProtocols | read-only | current | SSH Protocols available on this C4 SSH server. |
| 1.3.6.1.4.1.4998.1.1.40.1.13.3 | ScalarcadSshServerRunning | read-only | current | If true, the C4 SSH server is active. |
| 1.3.6.1.4.1.4998.1.1.40.1.13.4 | TablecadSshSessionTable | not-accessible | current | This table defines the configuration parameters of the RADIUS servers used for authentication by the C4. |
| 1.3.6.1.4.1.4998.1.1.40.1.13.4.1 | RowcadSshSessionEntry | not-accessible | current | |
| 1.3.6.1.4.1.4998.1.1.40.1.13.4.1.1 | ColumncadSshSessionIndex | not-accessible | current | The session index corresponding to a SSH session. These are preallocated by the system at startup. |
| 1.3.6.1.4.1.4998.1.1.40.1.13.4.1.2 | ColumncadSshConnectionId | read-only | current | The connection identifier for this SSH session. |
| 1.3.6.1.4.1.4998.1.1.40.1.13.4.1.3 | ColumncadSshUser | read-only | current | |
| 1.3.6.1.4.1.4998.1.1.40.1.13.4.1.4 | ColumncadSshClientIpAddr | read-only | current | The client IP address. |
| 1.3.6.1.4.1.4998.1.1.40.1.13.4.1.5 | ColumncadSshServiceType | read-only | current | |
| 1.3.6.1.4.1.4998.1.1.40.1.13.4.1.6 | ColumncadSshAuthMethod | read-only | current | The authentication method for this session. |
| 1.3.6.1.4.1.4998.1.1.40.1.13.4.1.7 | ColumncadSshCipherType | read-only | current | |
| 1.3.6.1.4.1.4998.1.1.40.1.13.4.1.8 | ColumncadSshMacAlg | read-only | current | |
| 1.3.6.1.4.1.4998.1.1.40.1.13.4.1.9 | ColumncadSshClientSw | read-only | current | |
| 1.3.6.1.4.1.4998.1.1.40.1.13.4.1.10 | ColumncadSshSessionRowStatus | read-only | current | |
| 1.3.6.1.4.1.4998.1.1.40.1.14 | TablecadCLIcommandPrivilegeTable | not-accessible | current | This table reflects the mapping of CLI commands to privilege levels. |
| 1.3.6.1.4.1.4998.1.1.40.1.14.1 | RowcadCLIcommandPrivilegeEntry | not-accessible | current | |
| 1.3.6.1.4.1.4998.1.1.40.1.14.1.1 | ColumncadCLIcommandPrivilegeNodeAddr | not-accessible | obsolete | Address of the command node that uniquely identifies a CLI command. |
| 1.3.6.1.4.1.4998.1.1.40.1.14.1.2 | ColumncadCLIcommandPrivilegeCommand | not-accessible | current | Fully expanded CLI command text that uniquely identifies this command node. |
| 1.3.6.1.4.1.4998.1.1.40.1.14.1.3 | ColumncadCLIcommandPrivilegeOriginalLevel | read-create | current | Original privilege level defined at compile time. |
| 1.3.6.1.4.1.4998.1.1.40.1.14.1.4 | ColumncadCLIcommandPrivilegeNewLevel | read-create | current | Configured privilege level that overrides cadCLIcommandPrivilegeOriginalLevel |
| 1.3.6.1.4.1.4998.1.1.40.1.14.1.5 | ColumncadCLIcommandPrivilegeRowStatus | read-create | current | Control object for this row |
| 1.3.6.1.4.1.4998.1.1.40.1.20 | NodecadAAAConformance | |||
| 1.3.6.1.4.1.4998.1.1.40.1.20.1 | NodecadAAAGroups | |||
| 1.3.6.1.4.1.4998.1.1.40.1.20.1.1 | GroupcadAAALineGroup | current | This group defines line configuration for the C4. | |
| 1.3.6.1.4.1.4998.1.1.40.1.20.1.2 | GroupcadAAAMethodGroup | current | This group defines the AAA methods for the C4. | |
| 1.3.6.1.4.1.4998.1.1.40.1.20.1.3 | GroupcadAAAServerGroup | current | This group defines the server cross reference group for AAA. | |
| 1.3.6.1.4.1.4998.1.1.40.1.20.1.4 | GroupcadAAAProtocolGroup | current | This group defines AAA protocol information for the C4. | |
| 1.3.6.1.4.1.4998.1.1.40.1.20.1.5 | GroupcadAAASshGroup | current | This group defines AAA SSH information for the C4. | |
| 1.3.6.1.4.1.4998.1.1.40.1.20.1.6 | GroupcadAAAPasswordGroup | current | This group defines AAA local password information for the C4. | |
| 1.3.6.1.4.1.4998.1.1.40.1.20.1.7 | GroupcadAAAEnableGroup | current | This group defines AAA local enable password information for the C4. | |
| 1.3.6.1.4.1.4998.1.1.40.1.20.2 | NodecadAAACompliances | |||
| 1.3.6.1.4.1.4998.1.1.40.1.20.2.1 | CompliancecadAAACompliance | current | The compliance statement |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CmdNode | OCTET STRING (SIZE(4)) | current | Address of the command node associated with the CLI command |
| PemKey | OCTET STRING (SIZE(0..2800)) | current | An rsa/dsa digital key in PEM format. |