CADANT-CMTS-POLICY-MIB
170 objects
Arris Cadant C4 CMTS policy parameters and constants
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4998.1.1.35.1 | IdentitycadPolicyMib | Arris Cadant C4 CMTS policy parameters and constants | ||
| 1.3.6.1.4.1.4998.1.1.35.1.1 | TablecadScmAccessTable | not-accessible | current | A table contains SCM access control list information. Each physical interface is associated with the access list number defined as hjpolAccListNumber in hjpolA… |
| 1.3.6.1.4.1.4998.1.1.35.1.1.1 | RowcadScmAccessEntry | not-accessible | current | A conceptual row containing information about SCM access list for each physical interface. |
| 1.3.6.1.4.1.4998.1.1.35.1.1.1.1 | ColumncadScmAccIfIndex | not-accessible | current | The value of this object identifies a physical layer2 interface, such as a DOCSIS MAC or a Gigabit/TenGigabit NAM, on which SCM access control is applied |
| 1.3.6.1.4.1.4998.1.1.35.1.1.1.2 | ColumncadScmAccListNumber | read-write | current | The value of this object identifies entry(or entries) in the hjpolAccListTable. The identified entry(or entries) contains SCM access parameters to be used when… |
| 1.3.6.1.4.1.4998.1.1.35.1.1.1.3 | ColumncadScmAccRowStatus | read-write | current | Control Object for row creation and deletion. |
| 1.3.6.1.4.1.4998.1.1.35.1.2 | TablecadDistListInTable | not-accessible | current | Distribute List In Table |
| 1.3.6.1.4.1.4998.1.1.35.1.2.1 | RowcadDistListInEntry | not-accessible | current | A row in Distribute List In table |
| 1.3.6.1.4.1.4998.1.1.35.1.2.1.1 | ColumncadDistListInProtocol | read-only | current | Protocol for which distribute list is applied. |
| 1.3.6.1.4.1.4998.1.1.35.1.2.1.2 | ColumncadDistListInProtocolProcess | read-only | current | VRF for which distribute list is applied. |
| 1.3.6.1.4.1.4998.1.1.35.1.2.1.3 | ColumncadDistListInIfIndex | read-only | current | Interface for which distribute list is applied. The value will be 1 if the distribute list is applied to all interfaces. |
| 1.3.6.1.4.1.4998.1.1.35.1.2.1.4 | ColumncadDistListInAccessListNum | read-only | current | The configured distribute in list refers to the access list specified. |
| 1.3.6.1.4.1.4998.1.1.35.1.2.1.5 | ColumncadDistListInAccessListName | read-create | current | Name of the access list referred by distribute in list. |
| 1.3.6.1.4.1.4998.1.1.35.1.2.1.6 | ColumncadDistListInStatus | read-create | current | The row status variable, used according to row installation and removal conventions. Once access list specified default row status is active. |
| 1.3.6.1.4.1.4998.1.1.35.1.4 | TablecadPolicyRateLimitTable | not-accessible | current | A table of rate limiting policies applied to a physical interface. |
| 1.3.6.1.4.1.4998.1.1.35.1.4.1 | RowcadPolicyRateLimitEntry | not-accessible | current | An ordered list of the rate limit polices |
| 1.3.6.1.4.1.4998.1.1.35.1.4.1.1 | ColumncadPolicyRateLimitIfIndex | not-accessible | current | The value of this object identifies a physical layer2 interface, such as a DOCSIS MAC or a Gigabit/TenGigabit NAM, on which the rate limit policy is applied |
| 1.3.6.1.4.1.4998.1.1.35.1.4.1.2 | ColumncadPolicyRateLimitDirection | not-accessible | current | Direction of traffic on interface to apply the rate limit policy |
| 1.3.6.1.4.1.4998.1.1.35.1.4.1.3 | ColumncadPolicyRateLimitIndex | not-accessible | current | Index of rate limit policy. Policies are applied in the order specified by this index value |
| 1.3.6.1.4.1.4998.1.1.35.1.4.1.4 | ColumncadPolicyRateLimitStatus | read-create | current | Create and delete table row entries. |
| 1.3.6.1.4.1.4998.1.1.35.1.4.1.5 | ColumncadPolicyRateLimitAclType | read-create | current | Type of ACL associated with rate limit policy |
| 1.3.6.1.4.1.4998.1.1.35.1.4.1.6 | ColumncadPolicyRateLimitAclNum | read-create | current | ACL number. If the ACL does not exist, then this is treated as if the ACL type is none, i.e. all IP traffic matches the policy. |
| 1.3.6.1.4.1.4998.1.1.35.1.4.1.7 | ColumncadPolicyRateLimitBps | read-create | current | Average rate, in bits per second (bps). |
| 1.3.6.1.4.1.4998.1.1.35.1.4.1.8 | ColumncadPolicyRateLimitBurstNormal | read-create | current | Normal burst size, in bytes. The minimum value is bps divided by 2000. |
| 1.3.6.1.4.1.4998.1.1.35.1.4.1.9 | ColumncadPolicyRateLimitBurstMax | read-create | current | Excess burst size, in bytes. Must be equal to or larger than cadPolicyRateLimitBurstNormal |
| 1.3.6.1.4.1.4998.1.1.35.1.4.1.10 | ColumncadPolicyRateLimitConformAction | read-create | current | Action to take on packets that conform to the specified rate limit. |
| 1.3.6.1.4.1.4998.1.1.35.1.4.1.11 | ColumncadPolicyRateLimitConformValue | read-create | current | Value to set if action is set-prec-transmit, set-dscp-transmit or set-priority-transmit. For set-priority-transmit,the valid value range is 0-7. |
| 1.3.6.1.4.1.4998.1.1.35.1.4.1.12 | ColumncadPolicyRateLimitExceedAction | read-create | current | Action to take on packets that exceed to the specified rate limit. |
| 1.3.6.1.4.1.4998.1.1.35.1.4.1.13 | ColumncadPolicyRateLimitExceedValue | read-create | current | Value to set if action is set-prec-transmit, set-dscp-transmit or set-priority-transmit. For set-priority-transmit,the valid value range is 0-7. |
| 1.3.6.1.4.1.4998.1.1.35.1.4.1.14 | ColumncadPolicyRateLimitClearCounts | read-create | current | If set to true, clear the counts in the CadPolicyRateLimitStatusEntry. When read, this field always returns false. The correct way to clear the counts is to fi… |
| 1.3.6.1.4.1.4998.1.1.35.1.5 | TablecadPolicyRateLimitStatusTable | not-accessible | current | A table of counts of rate limiting policies applied to a physical interface. |
| 1.3.6.1.4.1.4998.1.1.35.1.5.1 | RowcadPolicyRateLimitStatusEntry | not-accessible | current | Dyanmic status associated with a rate limit policy |
| 1.3.6.1.4.1.4998.1.1.35.1.5.1.1 | ColumncadPolicyRateLimitConformPackets | read-only | current | Number of packets conforming to the policy rate |
| 1.3.6.1.4.1.4998.1.1.35.1.5.1.2 | ColumncadPolicyRateLimitConformBytes | read-only | current | Number of bytes conforming to the policy rate |
| 1.3.6.1.4.1.4998.1.1.35.1.5.1.3 | ColumncadPolicyRateLimitExceedPackets | read-only | current | Number of packets exceeding to the policy rate |
| 1.3.6.1.4.1.4998.1.1.35.1.5.1.4 | ColumncadPolicyRateLimitExceedBytes | read-only | current | Number of bytes exceeding to the policy rate |
| 1.3.6.1.4.1.4998.1.1.35.1.5.1.5 | ColumncadPolicyRateLimitCurrentBurst | read-only | current | The current number of bytes in the burst exceeding the average bps rate |
| 1.3.6.1.4.1.4998.1.1.35.1.5.1.6 | ColumncadPolicyRateLimitLastCleared | read-only | current | The value of SysUptime when the rate limit counters were last cleared. |
| 1.3.6.1.4.1.4998.1.1.35.1.6 | TablecadPolicyAclTable | not-accessible | current | A table contains access control list (ACL) information. Each row corresponds to an access control entry (ACE), and each ACL may have multiple ACEs that are app… |
| 1.3.6.1.4.1.4998.1.1.35.1.6.1 | RowcadPolicyAclEntry | not-accessible | current | A conceptual row containing information about SCM access list for each physical interface. |
| 1.3.6.1.4.1.4998.1.1.35.1.6.1.1 | ColumncadAclNumber | not-accessible | current | IPv6 ACL number. IPv6 ACLs are in the range 200-399. Extended ACL number. Extended ACLs are in the range 100-199. Standard ACLs are in the range 1-99. |
| 1.3.6.1.4.1.4998.1.1.35.1.6.1.2 | ColumncadAclIndex | not-accessible | current | Order in which this ACE is used in the ACL. |
| 1.3.6.1.4.1.4998.1.1.35.1.6.1.3 | ColumncadAclType | read-create | current | Indicates whether this EACE is used as a standard, extended, or remark ACL. The rate-limiting type is not valid for this table. Remark is the only valid type t… |
| 1.3.6.1.4.1.4998.1.1.35.1.6.1.4 | ColumncadAclStatus | read-create | current | RowStatus used to add and remove ACEs. ACEs that contain only remarks should have their status set to notInService and should be created with createAndWait. |
| 1.3.6.1.4.1.4998.1.1.35.1.6.1.5 | ColumncadAclPermit | read-create | current | Permit or Deny the packet when matched. |
| 1.3.6.1.4.1.4998.1.1.35.1.6.1.6 | ColumncadAclProtocol | read-create | current | Protocol number to match |
| 1.3.6.1.4.1.4998.1.1.35.1.6.1.7 | ColumncadAclSrcIp | read-create | current | Source IP address to match |
| 1.3.6.1.4.1.4998.1.1.35.1.6.1.8 | ColumncadAclSrcIpMask | read-create | current | Source IP wildcard mask to match. Default to match anything |
| 1.3.6.1.4.1.4998.1.1.35.1.6.1.9 | ColumncadAclSrcPortOp | read-create | current | Source port condition (lt,gt,eq,ne) to match. |
| 1.3.6.1.4.1.4998.1.1.35.1.6.1.10 | ColumncadAclSrcPortLo | read-create | current | First Source port number to match. -1 indicates that this field is not used. |
| 1.3.6.1.4.1.4998.1.1.35.1.6.1.11 | ColumncadAclSrcPortHi | read-create | current | Second Source port number to match. -1 indicates that this field is not used. |
| 1.3.6.1.4.1.4998.1.1.35.1.6.1.12 | ColumncadAclDstIp | read-create | current | Destination IP address to match |
| 1.3.6.1.4.1.4998.1.1.35.1.6.1.13 | ColumncadAclDstIpMask | read-create | current | Destination IP wildcard (inverse) mask to match. Default to match anything. |
| 1.3.6.1.4.1.4998.1.1.35.1.6.1.14 | ColumncadAclDstPortOp | read-create | current | Destination port condition (lt,gt,eq,ne) to match. |
| 1.3.6.1.4.1.4998.1.1.35.1.6.1.15 | ColumncadAclDstPortLo | read-create | current | First Destination port number to match. -1 indicates that this field is not used. |
| 1.3.6.1.4.1.4998.1.1.35.1.6.1.16 | ColumncadAclDstPortHi | read-create | current | Second Destination port number to match. -1 indicates that this field is not used |
| 1.3.6.1.4.1.4998.1.1.35.1.6.1.17 | ColumncadAclLogging | read-create | current | Turn on or off the ACE matching log |
| 1.3.6.1.4.1.4998.1.1.35.1.6.1.18 | ColumncadAclProtoType | read-create | current | Sub-protocol qualifiers. For protocol type ICMP, this value matches the ICMP message type (0 - 255). For IGMP, this value matches the IGMP message type (0-15).… |
| 1.3.6.1.4.1.4998.1.1.35.1.6.1.19 | ColumncadAclProtoCode | read-create | current | Sub-protocol qualifiers. For protocol type ICMP, this value matches the ICMP message type code (0 - 255). A value of -1 indicates this value is not used. |
| 1.3.6.1.4.1.4998.1.1.35.1.6.1.20 | ColumncadAclIpTos | read-create | current | Matches the TOS field of the IP header. |
| 1.3.6.1.4.1.4998.1.1.35.1.6.1.21 | ColumncadAclIpTosMask | read-create | current | Mask to apply to the IpTos object when finding a mactch on the TOS field of the IP header. A value of 0 is used to indicate that the TOS is not used. |
| 1.3.6.1.4.1.4998.1.1.35.1.6.1.22 | ColumncadAclTcpFlags | read-create | current | Matches the flags field of the TCP header. |
| 1.3.6.1.4.1.4998.1.1.35.1.6.1.23 | ColumncadAclTcpFlagsMask | read-create | current | Mask to apply to the TcpFlags object when finding a mactch on the flags field of the TCP header. |
| 1.3.6.1.4.1.4998.1.1.35.1.6.1.24 | ColumncadAclFragments | read-create | current | Indicates whether this EACE applies to noninitial fragments of packets. The default is disabled. |
| 1.3.6.1.4.1.4998.1.1.35.1.6.1.26 | ColumncadAclRemark | read-create | current | The comment associated with the access control entry. This is only valid for ACEs of type remark. |
| 1.3.6.1.4.1.4998.1.1.35.1.6.1.27 | ColumncadAclIpAddrType | read-create | current | IP Address type |
| 1.3.6.1.4.1.4998.1.1.35.1.7 | TablecadSnmpCommAccessTable | not-accessible | current | A table contains the access list information associated with the community string. Each community string defined in snmpCommunithTable can be configured with o… |
| 1.3.6.1.4.1.4998.1.1.35.1.7.1 | RowcadSnmpCommAccessEntry | not-accessible | current | A conceptual row containing information about access list filtering associated with community string. |
| 1.3.6.1.4.1.4998.1.1.35.1.7.1.1 | ColumncadSnmpCommAccessName | not-accessible | current | The index value that uniquely identifies an entry in snmpCommunityTable. |
| 1.3.6.1.4.1.4998.1.1.35.1.7.1.2 | ColumncadSnmpCommAccessList | read-create | current | The value of this object identifies entry (or entries) in the cadPolicyAclTable. The identified entry (or entries) contains access parameters to be used when f… |
| 1.3.6.1.4.1.4998.1.1.35.1.7.1.3 | ColumncadSnmpCommAccessStatus | read-create | current | Control Object for row creation and deletion. |
| 1.3.6.1.4.1.4998.1.1.35.1.8 | TablecadPolicyAccessGroupTable | not-accessible | current | A table of access group policies applied to a physical interface. |
| 1.3.6.1.4.1.4998.1.1.35.1.8.1 | RowcadPolicyAccessGroupEntry | not-accessible | current | An ordered list of the access group polices |
| 1.3.6.1.4.1.4998.1.1.35.1.8.1.1 | ColumncadPolicyAccessGroupIfIndex | not-accessible | current | The value of this object identifies a physical layer2 interface, such as a DOCSIS MAC or a Gigabit/TenGigabit NAM, on which the access group policy is applied |
| 1.3.6.1.4.1.4998.1.1.35.1.8.1.2 | ColumncadPolicyAccessGroupDirection | not-accessible | current | Direction of traffic on interface to apply the access group policy |
| 1.3.6.1.4.1.4998.1.1.35.1.8.1.3 | ColumncadPolicyAccessGroupStatus | read-create | current | This table supports sets of createAndGo(4) and destroy(6) |
| 1.3.6.1.4.1.4998.1.1.35.1.8.1.4 | ColumncadPolicyAccessGroupIpv4AclNum | read-create | current | ACL number. If the ACL does not exist, then this is treated as if the ACL type is none, i.e. all IPv4 traffic matches the policy. |
| 1.3.6.1.4.1.4998.1.1.35.1.8.1.5 | ColumncadPolicyAccessGroupClearCounts | read-create | current | If set to true, clear the counts in the CadPolicyAccessGroupStatusEntry. When read, this field always returns false. The correct way to clear the counts is to … |
| 1.3.6.1.4.1.4998.1.1.35.1.8.1.6 | ColumncadPolicyAccessGroupIpv6AclNum | read-create | current | ACL number. If the ACL does not exist, then this is treated as if the ACL type is none, i.e. all IPv6 traffic matches the policy. |
| 1.3.6.1.4.1.4998.1.1.35.1.8.1.7 | ColumncadPolicyAccessGroupIpv6AclName | read-create | current | ACL name. |
| 1.3.6.1.4.1.4998.1.1.35.1.9 | TablecadPolicyAccessGroupStatusTable | not-accessible | current | A table of counts of rate limiting policies applied to a physical interface. |
| 1.3.6.1.4.1.4998.1.1.35.1.9.1 | RowcadPolicyAccessGroupStatusEntry | not-accessible | current | Dyanmic status associated with a rate limit policy |
| 1.3.6.1.4.1.4998.1.1.35.1.9.1.1 | ColumncadPolicyAccessGroupPermitPackets | read-only | current | Number of packets conforming to the access group policy permit ACL |
| 1.3.6.1.4.1.4998.1.1.35.1.9.1.2 | ColumncadPolicyAccessGroupDenyPackets | read-only | current | Number of packets conforming to the access group policy deny ACL |
| 1.3.6.1.4.1.4998.1.1.35.1.9.1.3 | ColumncadPolicyAccessGroupLastCleared | read-only | current | The value of SysUptime when the access group policy counters were last cleared. |
| 1.3.6.1.4.1.4998.1.1.35.1.11 | TablecadPolicyPfxListTable | not-accessible | current | Prefix List Table |
| 1.3.6.1.4.1.4998.1.1.35.1.11.1 | RowcadPolicyPfxListEntry | not-accessible | current | A row in Prefix list table |
| 1.3.6.1.4.1.4998.1.1.35.1.11.1.1 | ColumncadPolicyPfxListNumber | read-only | current | Prefix list is identified by number value of 0 should be passed for this object if prefix list is configured by name |
| 1.3.6.1.4.1.4998.1.1.35.1.11.1.2 | ColumncadPolicyPfxListName | read-only | current | Name of prefix list.Null value is assigned to this Object if the prefix list is identified by number |
| 1.3.6.1.4.1.4998.1.1.35.1.11.1.3 | ColumncadPolicyPfxListSeqNumber | read-only | current | A sequence in the prefix list is identified by sequence number. If no sequence is specified defalut sequence of 5 is assumend. IF one more sequence is configur… |
| 1.3.6.1.4.1.4998.1.1.35.1.11.1.4 | ColumncadPolicyPfxListIpAddress | read-only | current | This is the source ipv4 or ipv6 address on which the filtering needs to be applied |
| 1.3.6.1.4.1.4998.1.1.35.1.11.1.5 | ColumncadPolicyPfxListIpAddMaskLen | read-only | current | Mask length of the Source IP address |
| 1.3.6.1.4.1.4998.1.1.35.1.11.1.6 | ColumncadPolicyPfxListMaskGeValue | read-only | current | If the received route matches the source address and the mask length is greater than the value specified, apply the specified action to the route |
| 1.3.6.1.4.1.4998.1.1.35.1.11.1.7 | ColumncadPolicyPfxListMaskLeValue | read-only | current | This value specifies if the received route mask length is less the value specified here do the action specified (permit/deny) |
| 1.3.6.1.4.1.4998.1.1.35.1.11.1.8 | ColumncadPolicyPfxListAction | read-create | current | specifies the action to be taken. Possible actions include permit(1) and deny(2) |
| 1.3.6.1.4.1.4998.1.1.35.1.11.1.9 | ColumncadPolicyPfxListStatus | read-create | current | The row status variable, used according to row installation and removal conventions. |
| 1.3.6.1.4.1.4998.1.1.35.1.11.1.10 | ColumncadPolicyPfxListAfi | not-accessible | current | This is the Address Family Identifier (AFI) of the prefix that will follow. Only IPv4 or IPv6 prefix-list will be supported. |
| 1.3.6.1.4.1.4998.1.1.35.1.11.1.11 | ColumncadPolicyPfxListSafi | not-accessible | current | This is the Subsequent Address Family Identifier (SAFI) of the prefix that will follow. |
| 1.3.6.1.4.1.4998.1.1.35.1.12 | TablecadPolicyDistListOutTable | not-accessible | current | Distribute List Out Table |
| 1.3.6.1.4.1.4998.1.1.35.1.12.1 | RowcadPolicyDistListOutEntry | not-accessible | current | A row in Distribute List Out table |
| 1.3.6.1.4.1.4998.1.1.35.1.12.1.1 | ColumncadPolicyDistListOutSrcProtocol | read-only | current | Source Protocol under which distribute list is configured. |
| 1.3.6.1.4.1.4998.1.1.35.1.12.1.2 | ColumncadPolicyDistListOutSrcProtocolProcess | read-only | current | Source VRF ID under which distribute list is configured. |
| 1.3.6.1.4.1.4998.1.1.35.1.12.1.3 | ColumncadPolicyDistListOutRoutingProtocol | read-only | current | Destination Protocol to which routes need to be sent. |
| 1.3.6.1.4.1.4998.1.1.35.1.12.1.4 | ColumncadPolicyDistListOutRoutingProcess | read-only | current | Destination VRF ID under which distribute list is configured. |
| 1.3.6.1.4.1.4998.1.1.35.1.12.1.5 | ColumncadPolicyDistListOutAutonomousSystemNum | read-only | current | Autonomous system number of BGP to which routes need to be redistributed. If destination protocol is BGP appropriate AS number needs to be filled for this obje… |
| 1.3.6.1.4.1.4998.1.1.35.1.12.1.6 | ColumncadPolicyDistListOutAccessListNum | read-only | current | The configured distribute out list refers to the access list specified. The access list number must be in the range of 1 - 99 |
| 1.3.6.1.4.1.4998.1.1.35.1.12.1.7 | ColumncadPolicyDistListOutAccessListName | read-create | current | Name of the access list referred by distribute list. The access list name must be less than 32 characters |
| 1.3.6.1.4.1.4998.1.1.35.1.12.1.8 | ColumncadPolicyDistListOutStatus | read-create | current | The row status variable, used according to row installation and removal conventions. Once access list specified default row status is UP. |
| 1.3.6.1.4.1.4998.1.1.35.1.12.1.9 | ColumncadPolicyDistListOutIfIndex | read-only | current | Interface for which distribute list is applied. The value will be 1 if the distribute list is applied to all interfaces. |
| 1.3.6.1.4.1.4998.1.1.35.1.13 | TablecadDistListOutTable | not-accessible | current | Distribute List Out Table |
| 1.3.6.1.4.1.4998.1.1.35.1.13.1 | RowcadDistListOutEntry | not-accessible | current | A row in Distribute List Out table |
| 1.3.6.1.4.1.4998.1.1.35.1.13.1.1 | ColumncadDistListOutVrIndex | read-only | current | virtual router index |
| 1.3.6.1.4.1.4998.1.1.35.1.13.1.2 | ColumncadDistListOutDestProtocol | read-only | current | Destination protocol for which distribute list is applied. |
| 1.3.6.1.4.1.4998.1.1.35.1.13.1.3 | ColumncadDistListOutSrcProtocol | read-only | current | Source protocol for which distribute list is applied. |
| 1.3.6.1.4.1.4998.1.1.35.1.13.1.4 | ColumncadDistListOutAccessListNum | read-create | current | Access List Number |
| 1.3.6.1.4.1.4998.1.1.35.1.13.1.5 | ColumncadDistListOutStatus | read-create | current | The row status variable, used according to row installation and removal conventions. Once access list specified default row status is active. |
| 1.3.6.1.4.1.4998.1.1.35.1.13.1.6 | ColumncadDistListOutAccessListName | read-create | current | Access List Name |
| 1.3.6.1.4.1.4998.1.1.35.1.14 | TablecadAclNameTable | not-accessible | current | This table maps names to ACL entries. Each row associates a name with the indexed ACL. |
| 1.3.6.1.4.1.4998.1.1.35.1.14.1 | RowcadAclNameEntry | not-accessible | current | A conceptual row containing name information about an ACL. |
| 1.3.6.1.4.1.4998.1.1.35.1.14.1.1 | ColumncadNameAclName | not-accessible | current | The name of the access control list. |
| 1.3.6.1.4.1.4998.1.1.35.1.14.1.2 | ColumncadNameAclNumber | not-accessible | current | Extended ACL number. Extended ACLs are in the range 100-199. Standard ACLs are in the range 1-99. |
| 1.3.6.1.4.1.4998.1.1.35.1.14.1.3 | ColumncadNameAclStatus | read-create | current | RowStatus used to add and remove names for ACLs. When an ACL is removed, the associated name is also removed. |
| 1.3.6.1.4.1.4998.1.1.35.1.15 | NodecadAclControl | |||
| 1.3.6.1.4.1.4998.1.1.35.1.15.1 | ScalarcadAclOrderAcl | read-write | current | This variable always returns false(2) upon reading. When set to true(1), the ACL identified in cadAclOrderAclIndex is renumbered with interval cadAclOrderAclIn… |
| 1.3.6.1.4.1.4998.1.1.35.1.15.2 | ScalarcadAclOrderAclIndex | read-write | current | This variable identifies the ACL that should be renumbered. |
| 1.3.6.1.4.1.4998.1.1.35.1.15.3 | ScalarcadAclOrderAclInterval | read-write | current | This variable specifies the numbering interval used between each ACE when reordering an ACL. |
| 1.3.6.1.4.1.4998.1.1.35.1.15.4 | ScalarcadAclOrderAclStart | read-write | current | This variable specifies the index that ACL reordering will use as the base for the first ACE. |
| 1.3.6.1.4.1.4998.1.1.35.1.15.5 | ScalarcadAclClearIpv4AclCounts | read-write | current | This variable specifies the access list number for which all IPv4 per-entry counts will be cleared. This number may correspond to an individual access list (1.… |
| 1.3.6.1.4.1.4998.1.1.35.1.15.6 | ScalarcadAclClearIpv6AclCounts | read-write | current | This variable specifies the access list number for which all IPv6 per-entry counts will be cleared. This number may correspond to an individual access list (20… |
| 1.3.6.1.4.1.4998.1.1.35.1.16 | TablecadPolicyAclExtTable | not-accessible | current | The cadPolicyAclExtTable augments the cadPolicyAclTable with a count for total number of times the access list entry has been matched by all referencing applic… |
| 1.3.6.1.4.1.4998.1.1.35.1.16.1 | RowcadPolicyAclExtEntry | not-accessible | current | Information about the policy access list entry. |
| 1.3.6.1.4.1.4998.1.1.35.1.16.1.1 | ColumncadAclEntryCount | read-only | current | Total number of times the access list entry has been matched by all referencing applications. |
| 1.3.6.1.4.1.4998.1.1.35.1.30 | NodecadPolicyRouting | |||
| 1.3.6.1.4.1.4998.1.1.35.1.30.1 | TablecadRouteMapTagTable | not-accessible | current | This table maps policy route map names to route map entries. Each row associates a name with the indexed policy route map. |
| 1.3.6.1.4.1.4998.1.1.35.1.30.1.1 | RowcadRouteMapTagEntry | not-accessible | current | A conceptual row containing name information for a policy route map. |
| 1.3.6.1.4.1.4998.1.1.35.1.30.1.1.1 | ColumncadRouteMapTagName | not-accessible | current | Name to used for this policy route map |
| 1.3.6.1.4.1.4998.1.1.35.1.30.1.1.2 | ColumncadRouteMapTagId | read-create | current | Id used to associate entries in the policy route map table to this name. |
| 1.3.6.1.4.1.4998.1.1.35.1.30.1.1.3 | ColumncadRouteMapTagRowStatus | read-create | current | The row status variable used according to row installation and removal convention. In our case, we have simplified this to the usage of only the following stat… |
| 1.3.6.1.4.1.4998.1.1.35.1.30.2 | TablecadRouteMapTable | not-accessible | current | This table contains policy route map data where each row contains information about the ACL being used and what set operations should be applied to the IP pack… |
| 1.3.6.1.4.1.4998.1.1.35.1.30.2.1 | RowcadRouteMapEntry | not-accessible | current | A conceptual row containing information for a policy route map entry. |
| 1.3.6.1.4.1.4998.1.1.35.1.30.2.1.1 | ColumncadRouteMapId | not-accessible | current | Id used to associate entries in the policy route map table. |
| 1.3.6.1.4.1.4998.1.1.35.1.30.2.1.2 | ColumncadRouteMapSeqNum | not-accessible | current | Sequence number used to order the match statements. |
| 1.3.6.1.4.1.4998.1.1.35.1.30.2.1.3 | ColumncadRouteMapMatchType | read-create | current | Type of match to used for this entry. Permit matches on the provided ACL and then applies the defined set operations before destination routing. Deny matches o… |
| 1.3.6.1.4.1.4998.1.1.35.1.30.2.1.4 | ColumncadRouteMapMatchAcl | read-create | current | ACL used to match the incoming packet. Since IPv4 is the only supported address type, the ACL number must be an extended or standard ACL. A value 0 implies tha… |
| 1.3.6.1.4.1.4998.1.1.35.1.30.2.1.5 | ColumncadRouteMapSetIpPrec | read-create | current | Indicates whether the IP Precedence should be changed on the packet if it matches the ACL and this is a permit type of match. |
| 1.3.6.1.4.1.4998.1.1.35.1.30.2.1.6 | ColumncadRouteMapIpPrec | read-create | current | The IP precedence value that should be used to replace the existing IP precedence of the matching packet. |
| 1.3.6.1.4.1.4998.1.1.35.1.30.2.1.7 | ColumncadRouteMapSetIpTos | read-create | current | Indicates whether the IP TOS should be changed on the packet if it matches the ACL and this is a permit type of match. |
| 1.3.6.1.4.1.4998.1.1.35.1.30.2.1.8 | ColumncadRouteMapIpTos | read-create | current | The IP TOS value that should be used to replace the existing IP TOS of the matching packet. |
| 1.3.6.1.4.1.4998.1.1.35.1.30.2.1.9 | ColumncadRouteMapSetNextHop | read-create | current | Indicates whether the next hop setting should be used to specify the adjacent next hop router when forwarding the matching packet. |
| 1.3.6.1.4.1.4998.1.1.35.1.30.2.1.10 | ColumncadRouteMapNextHopAddrType | read-create | current | The address type of the next hop and backup next hop addresses. Currently IPv4 is the only supported address type. |
| 1.3.6.1.4.1.4998.1.1.35.1.30.2.1.11 | ColumncadRouteMapNextHop | read-create | current | The address of the adjacent next hop router to use in forwading the matching packet. The next hop router address must be the address of an ajacent router, and … |
| 1.3.6.1.4.1.4998.1.1.35.1.30.2.1.12 | ColumncadRouteMapSetBackupNextHop | read-create | current | Indicates whether the backup next hop setting should be used to specify the adjacent next hop router when forwarding the matching packet. This only would be do… |
| 1.3.6.1.4.1.4998.1.1.35.1.30.2.1.13 | ColumncadRouteMapBackupNextHop | read-create | current | The address type of a second next hop, that can be used only if the primary next hop address can not be reached. Only Ipv4 addresses are currently supported. |
| 1.3.6.1.4.1.4998.1.1.35.1.30.2.1.14 | ColumncadRouteMapSetNullInterface | read-create | current | If set to true and the packet matches the ACL, it will be dropped. |
| 1.3.6.1.4.1.4998.1.1.35.1.30.2.1.15 | ColumncadRouteMapRowStatus | read-create | current | The row status variable used according to row installation and removal convention. In our case, we have simplified this to the usage of only the following stat… |
| 1.3.6.1.4.1.4998.1.1.35.1.30.2.1.16 | ColumncadRouteMapSetIpDscp | read-create | current | Indicates whether the IP DSCP should be changed on the packet if it matches the ACL and this is a permit type of match. |
| 1.3.6.1.4.1.4998.1.1.35.1.30.2.1.17 | ColumncadRouteMapIpDscp | read-create | current | The IP DSCP value that should be used to replace the existing IP DSCP of the matching packet. |
| 1.3.6.1.4.1.4998.1.1.35.1.30.2.1.18 | ColumncadRouteMapSetRecursiveNextHop | read-create | current | Indicates whether the recursive next hop setting should be used to specify the next hop for the remote router when forwarding the matching packet. |
| 1.3.6.1.4.1.4998.1.1.35.1.30.2.1.19 | ColumncadRouteMapRecursiveNextHop | read-create | current | The address type of a remote router next hop, that is used to perform a recursive route lookup. Only Ipv4 addresses are currently supported. |
| 1.3.6.1.4.1.4998.1.1.35.1.30.3 | TablecadRouteMapStatsTable | not-accessible | current | This table contains policy route map counts where each row contains information about the number of packets that match the specified ACL and were successfully … |
| 1.3.6.1.4.1.4998.1.1.35.1.30.3.1 | RowcadRouteMapStatsEntry | not-accessible | current | A conceptual row containing counts information for a policy route map entry. |
| 1.3.6.1.4.1.4998.1.1.35.1.30.3.1.1 | ColumncadRouteMapPktMatched | read-only | current | The number of packets that match the ACL defined in the route map entry and where the action was also successful. For matches of type deny, the packet is route… |
| 1.3.6.1.4.1.4998.1.1.35.1.30.3.1.2 | ColumncadRouteMapByteMatched | read-only | current | The number of bytes that match the ACL defined in the route map entry and where the action was also successful. For matches of type deny, the packet is routed … |
| 1.3.6.1.4.1.4998.1.1.35.1.30.3.1.3 | ColumncadRouteMapPktFailed | read-only | current | The number of packets that match the ACL defined in the route map entry and where the action failed. For route map entries of type match, the set operation fai… |
| 1.3.6.1.4.1.4998.1.1.35.1.30.3.1.4 | ColumncadRouteMapByteFailed | read-only | current | The number of packets that match the ACL defined in the route map entry and where the action failed. For route map entries of type match, the set operation fai… |
| 1.3.6.1.4.1.4998.1.1.35.1.30.4 | ScalarcadRouteMapClearStats | read-write | current | Setting this value will reset all the byte and packet counts for a route map. A value of 0 indicates no reset is performed. |
| 1.3.6.1.4.1.4998.1.1.35.1.30.5 | ScalarcadLocalPolicyRouteMap | read-write | current | This value contains the mapId of the policy route map to be used for local policy based routing. A value of 0 indicates no local policy routing is performed. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CadPolicyAction | Integer32 (1..2) | current | Action to be taken for Policy Policy Permit(1) Policy Deny (2) |
| CadPolicyProtocol | INTEGER { other (1), local (2), netmgmt (3), icmp (4), egp (5), ggp (6), hello (7), rip (8), isIs (9), esIs (10), ciscoIgrp (11), bbnSpfIgp (12), ospf (13), bgp (14), idpr (15), ciscoEigrp (16) } | current | A value that represents a type of the protocol. |
| CadPolicyRateLimitAction | INTEGER { transmit(1), drop(2), set-prec-transmit(3), set-dscp-transmit(4), set-priority-transmit(5) } | current | Enumeration of rate limiting actions |