CADANT-IPDR-MIB
89 objects
This MIB modules contains the definitions to support configuration and status for C4 IPDR implementation.
Imported Objects
| CADANT-PRODUCTS-MIB | cadExperimental |
| CADANT-TC | InetAddressIPv4or6 |
| INET-ADDRESS-MIB | InetAddress InetAddressIPv4 InetAddressType InetPortNumber |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4998.1.1.100.30 | IdentitycadIpdrMib | of | This MIB modules contains the definitions to support configuration and status for C4 IPDR implementation. | |
| 1.3.6.1.4.1.4998.1.1.100.30.1 | NodecadIpdrMIBObjects | |||
| 1.3.6.1.4.1.4998.1.1.100.30.1.1 | ScalarcadIpdrExportEnabled | read-write | current | IPDR streams is enabled or disabled. When enabled the cadIpdrQueryPort and cadIpdrStreamingPort will be open to listen for collector connections. When disabled… |
| 1.3.6.1.4.1.4998.1.1.100.30.1.2 | ScalarcadIpdrQueryPort | read-write | current | UDP port used to listen for collector queries. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.3 | ScalarcadIpdrStreamingPort | read-write | current | TCP port used to listen for collector connections. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.4 | ScalarcadIpdrDataAckWindow | read-write | current | Maximum number of unacknowledged IPDR/SP messages that may be outstanding to the collector. Applicable to DOCSIS 2.0 mode. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.5 | ScalarcadIpdrDataAckTimeout | read-write | current | Maximum elapsed time before a DATA message must be acknowledged by the collector. Applicable to DOCSIS 2.0 mode. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.6 | ScalarcadIpdrKeepAliveInterval | read-write | current | Maximum duration of protocol silence before a KEEPALIVE message must be sent. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.7 | ScalarcadIpdrExportAllCounts | read-write | current | Export all counts if true, and supress duplicate counts if false. The default is false. Applicable to DOCSIS 2.0 mode. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.8 | ScalarcadIpdrExportCpeInfo | read-write | current | Export information about CPEs behind CMs (CmCpeInfoList) if set to true. If false, supress information about CPEs. The default is false. Applicable to DOCSIS 2… |
| 1.3.6.1.4.1.4998.1.1.100.30.1.9 | ScalarcadIpdrSessionId | read-write | current | session-id used in the header of IPDR protocol messages. The default is 1. Applicable to DOCSIS 2.0 mode. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.10 | ScalarcadIpdrExportMode | read-write | current | DOCSIS mode exporter, either DOCSIS 2.0 or DOCSIS 3.0. The default is DOCSIS 2.0 mode, or 1. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.11 | TablecadIpdrCollectorTable | not-accessible | current | A priority ordered list of collectors that will be allowed to connect to the exporter. The highest priority active collector is designated the primary collecto… |
| 1.3.6.1.4.1.4998.1.1.100.30.1.11.1 | RowcadIpdrCollectorEntry | not-accessible | current | |
| 1.3.6.1.4.1.4998.1.1.100.30.1.11.1.1 | ColumncadIpdrCollectorPriority | not-accessible | current | The collector priority. Lower values indicate higher priority. The default priority is 1. Applicable to DOCSIS 2.0 mode. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.11.1.2 | ColumncadIpdrCollectorIpAddrType | read-only | current | The type of internet address (IPv4 or IPv6). The only internet address type currently allowed is IPv4. Applicable to DOCSIS 2.0 mode. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.11.1.3 | ColumncadIpdrCollectorIpAddress | not-accessible | current | Source IP address of a collector that will be permitted to connect to the exporter. Applicable to DOCSIS 2.0 mode. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.11.1.4 | ColumncadIpdrCollectorPort | read-only | current | Destination port of collector if exporter trys to connect to the collector. Default is 4747. This object is currently disabled. Applicable to DOCSIS 2.0 mode. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.11.1.5 | ColumncadIpdrCollectorActive | read-only | current | True if this collector is connected to the exporter. Applicable to DOCSIS 2.0 mode. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.11.1.6 | ColumncadIpdrCollectorPrimary | read-only | current | True if this collector is the primary collector. Applicable to DOCSIS 2.0 mode. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.11.1.7 | ColumncadIpdrCollectorOutIntRecs | read-only | current | Number of interim data records exported to this collector. Applicable to DOCSIS 2.0 mode. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.11.1.8 | ColumncadIpdrCollectorOutStpRecs | read-only | current | Number of stop data records exported to this collector. Applicable to DOCSIS 2.0 mode. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.11.1.9 | ColumncadIpdrCollectorSupIntRecs | read-only | current | Number of interim data records suppressed for this collector. Applicable to DOCSIS 2.0 mode. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.11.1.10 | ColumncadIpdrCollectorStatus | read-create | current | Row control for this collector. The only valid values for this object are createAndGo, destroy, and active. Applicable to DOCSIS 2.0 mode. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.12 | TablecadIpdrReportCycleTable | not-accessible | current | A list of scheduled report cycle start times and interval durations. Multiple entries indicate blocks of time with variable interval durations. Applicable to D… |
| 1.3.6.1.4.1.4998.1.1.100.30.1.12.1 | RowcadIpdrReportCycleEntry | not-accessible | current | |
| 1.3.6.1.4.1.4998.1.1.100.30.1.12.1.1 | ColumncadIpdrReportStartHH | not-accessible | current | The report cycle start hour. The default is 00. Applicable to DOCSIS 2.0 mode. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.12.1.2 | ColumncadIpdrReportStartMM | not-accessible | current | The report cycle start minutes after the hour. Default is 00. Applicable to DOCSIS 2.0 mode. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.12.1.3 | ColumncadIpdrReportInterval | read-create | current | The report cycle interval duration in minutes. The default is 60 minutes. Applicable to DOCSIS 2.0 mode. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.12.1.4 | ColumncadIpdrReportOutIntRecs | read-only | current | Number of interim data records exported during this report cycle. Applicable to DOCSIS 2.0 mode. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.12.1.5 | ColumncadIpdrReportOutStpRecs | read-only | current | Number of stop data records exported during this report cycle. Applicable to DOCSIS 2.0 mode. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.12.1.6 | ColumncadIpdrReportSupIntRecs | read-only | current | Number of interim data records suppressed during this report cycle. Applicable to DOCSIS 2.0 mode. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.12.1.7 | ColumncadIpdrReportStatus | read-create | current | Row control for this report cycle. The only valid values for this object are createAndGo, destroy, and active. Applicable to DOCSIS 2.0 mode. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.13 | TablecadIpdrServiceTable | not-accessible | current | A session-id ordered list of services that will be allowed to be requested by the Collector. This list is exclusive and are used when the exporter is in DOCSIS… |
| 1.3.6.1.4.1.4998.1.1.100.30.1.13.1 | RowcadIpdrServiceEntry | not-accessible | current | |
| 1.3.6.1.4.1.4998.1.1.100.30.1.13.1.1 | ColumncadIpdrServiceSessionId | not-accessible | current | The session-id used in the header of IPDR protocol messages. The default is 1. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.13.1.2 | ColumncadIpdrServiceType | read-create | current | The session service types are unknown(0), samis_1(1), samis_2(2), cpe(3), cm_reg(4), cm_us(5), spect(6), diag(7), topo(8), us_util(9), ds_util(10), diag_evt(11… |
| 1.3.6.1.4.1.4998.1.1.100.30.1.13.1.3 | ColumncadIpdrServiceMethod | read-create | current | The session service method (unknown, time, event, adhoc). The default is time. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.13.1.4 | ColumncadIpdrServicePriority | read-create | current | The session priority. Lower values indicate higher priority. This object is not used. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.13.1.5 | ColumncadIpdrServiceDataAckWindow | read-create | current | The session maximum number of unacknowledged IPDR/SP messages that may be outstanding to the collector. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.13.1.6 | ColumncadIpdrServiceDataAckTimeout | read-create | current | The session maximum elapsed time before a DATA message must be acknowledged by the collector. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.13.1.7 | ColumncadIpdrServiceReportCycleSet | read-create | current | The session report cycle set. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.13.1.8 | ColumncadIpdrServiceEvtPaceGap | read-create | current | The session event pace gap. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.13.1.9 | ColumncadIpdrServiceAllCounts | read-create | current | Export all counts if true, and supress duplicate counts if false. The default is false. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.13.1.10 | ColumncadIpdrServiceStatus | read-create | current | Row control for this service. The only valid values for this object are createAndGo, destroy, and active. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.14 | TablecadIpdrReportCycleSetTable | not-accessible | current | A list of sets of scheduled report cycle start times and interval durations. Multiple entries indicate blocks of time with variable interval durations. Applica… |
| 1.3.6.1.4.1.4998.1.1.100.30.1.14.1 | RowcadIpdrReportCycleSetEntry | not-accessible | current | |
| 1.3.6.1.4.1.4998.1.1.100.30.1.14.1.1 | ColumncadIpdrReportCycleSetSet | not-accessible | current | The report cycle set id number. The default is 1. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.14.1.2 | ColumncadIpdrReportCycleSetStartHH | not-accessible | current | The report cycle set start hour. The default is 00. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.14.1.3 | ColumncadIpdrReportCycleSetStartMM | not-accessible | current | The report cycle set start minutes after the hour. Default is 00. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.14.1.4 | ColumncadIpdrReportCycleSetInterval | read-create | current | The report cycle set interval duration in minutes. The default is 60 minutes. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.14.1.5 | ColumncadIpdrReportCycleSetStatus | read-create | current | Row control for this report cycle set entry. The only valid values for this object are createAndGo, destroy, and active. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.15 | TablecadIpdrCountsTable | not-accessible | current | A session-id/priority/collector ordered list of counts for all sessions. Applicable to DOCSIS 2.0 and 3.0 modes. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.15.1 | RowcadIpdrCountsEntry | not-accessible | current | |
| 1.3.6.1.4.1.4998.1.1.100.30.1.15.1.1 | ColumncadIpdrCountsSessionId | not-accessible | current | The counts session-id used in the header of IPDR protocol messages. The default is 1. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.15.1.2 | ColumncadIpdrCountsCollectorPriority | not-accessible | current | The counts collector priority. Lower values indicate higher priority. The default priority is 1. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.15.1.3 | ColumncadIpdrCountsCollectorIpAddress | not-accessible | current | The counts source IP address of a collector that will be permitted to connect to the exporter. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.15.1.4 | ColumncadIpdrCountsStartHH | not-accessible | current | The counts report cycle start hour. The default is 00. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.15.1.5 | ColumncadIpdrCountsStartMM | not-accessible | current | The counts report cycle start minutes after the hour. Default is 00. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.15.1.6 | ColumncadIpdrCountsAdhocIndex | not-accessible | current | The counts adhoc index. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.15.1.7 | ColumncadIpdrCountsStartTime | read-create | current | The counts report cycle start time. Default is 0 length. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.15.1.8 | ColumncadIpdrCountsStopTime | read-create | current | The counts report cycle stop time. Default is 0 length. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.15.1.9 | ColumncadIpdrCountsIntRecs | read-only | current | Number of interim data records exported for this session-id to this collector. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.15.1.10 | ColumncadIpdrCountsSupIntRecs | read-only | current | Number of interim data records suppressed for this session-id to this collector. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.15.1.11 | ColumncadIpdrCountsStartRecs | read-only | current | Number of start data records exported for this session-id to this collector. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.15.1.12 | ColumncadIpdrCountsStopRecs | read-only | current | Number of stop data records exported for this session-id to this collector. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.15.1.13 | ColumncadIpdrCountsEventRecs | read-only | current | Number of event data records exported for this session-id to this collector. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.15.1.14 | ColumncadIpdrCountsStatus | read-create | current | Row control for this counts entry. The only valid values for this object are createAndGo, destroy, and active. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.16 | TablecadIpdrSessionCollectorTable | not-accessible | current | A session and priority ordered list of collectors that is used to track the Active and Primary status of the collector relative to this session. Applicable to … |
| 1.3.6.1.4.1.4998.1.1.100.30.1.16.1 | RowcadIpdrSessionCollectorEntry | not-accessible | current | |
| 1.3.6.1.4.1.4998.1.1.100.30.1.16.1.1 | ColumncadIpdrSessionCollectorSessionId | not-accessible | current | The counts session-id used in the header of IPDR protocol messages. The default is 1. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.16.1.2 | ColumncadIpdrSessionCollectorPriority | not-accessible | current | The collector priority. Lower values indicate higher priority. The default priority is 1. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.16.1.3 | ColumncadIpdrSessionCollectorIpAddrType | read-only | current | The type of internet address (IPv4 or IPv6). The only internet address type currently allowed is IPv4. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.16.1.4 | ColumncadIpdrSessionCollectorIpAddress | not-accessible | current | Source IP address of a collector that will be permitted to connect to the exporter. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.16.1.5 | ColumncadIpdrSessionCollectorPort | read-only | current | Destination port of collector if exporter trys to connect to the collector. Default is 4747. This object is currently disabled. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.16.1.6 | ColumncadIpdrSessionCollectorActive | read-only | current | True if this collector is connected to the exporter for this session. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.16.1.7 | ColumncadIpdrSessionCollectorPrimary | read-only | current | True if this collector is the primary collector for this session. |
| 1.3.6.1.4.1.4998.1.1.100.30.1.16.1.8 | ColumncadIpdrSessionCollectorStatus | read-create | current | Row control for this collector. The only valid values for this object are createAndGo, destroy, and active. |
| 1.3.6.1.4.1.4998.1.1.100.30.2 | NodecadIpdrMIBConformance | |||
| 1.3.6.1.4.1.4998.1.1.100.30.2.1 | NodecadIpdrMIBCompliances | |||
| 1.3.6.1.4.1.4998.1.1.100.30.2.1.1 | CompliancecadIpdrMIBCompliance | current | The compliance statement for the Arris IPDR implementation. | |
| 1.3.6.1.4.1.4998.1.1.100.30.2.2 | NodecadIpdrMIBGroups | |||
| 1.3.6.1.4.1.4998.1.1.100.30.2.2.1 | GroupcadIpdrBasicGroup | current | ||
| 1.3.6.1.4.1.4998.1.1.100.30.2.2.2 | GroupcadIpdrCollectorGroup | current | ||
| 1.3.6.1.4.1.4998.1.1.100.30.2.2.3 | GroupcadIpdrReportGroup | current | ||
| 1.3.6.1.4.1.4998.1.1.100.30.2.2.4 | GroupcadIpdrServiceGroup | current | ||
| 1.3.6.1.4.1.4998.1.1.100.30.2.2.5 | GroupcadIpdrReportCycleSetGroup | current | ||
| 1.3.6.1.4.1.4998.1.1.100.30.2.2.6 | GroupcadIpdrCountsGroup | current | ||
| 1.3.6.1.4.1.4998.1.1.100.30.2.2.7 | GroupcadIpdrSessionCollectorGroup | current |