CADANT-REMOTE-QUERY-MIB
25 objects
This MIB module provides the management of the Cadant C4 Cable Modem Termination Systems (CMTS) Remote Query feature. This feature, implemented on a CMTS, facilitates SNMP polling of remote cable modems (CMs). This MIB includes the configuration and status objects of the CMTS CM Poller and remote CMs that polled by the CMTS CM Poller
Imported Objects
| CADANT-CMTS-MAC-MIB | cadIfCmtsCmStatusEntry |
| CADANT-PRODUCTS-MIB | cadCmRemoteQuery |
| DOCS-IF-MIB | TenthdB TenthdBmV |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4998.1.1.55.1 | IdentitycadCmRemoteQueryMib | This MIB module provides the management of the Cadant C4 Cable Modem Termination Systems (CMTS) Remote Query feature. This feature, implemented on a CMTS, faci… | ||
| 1.3.6.1.4.1.4998.1.1.55.1.1 | NodecadCmRemoteQueryPoller | |||
| 1.3.6.1.4.1.4998.1.1.55.1.1.1 | ScalarcadCmRemoteQueryPollerEnable | read-write | current | An indication of whether the CMTS CM Poller is running. When the poller is enabled, it polls the remote CMs periodically specified in the cadCmRemoteQueryPolle… |
| 1.3.6.1.4.1.4998.1.1.55.1.1.2 | ScalarcadCmRemoteQueryPollerInterval | read-write | current | An interval between two polling cycles of the CMTS CM Poller. The poller will not start the next cycle until it finished polling for the last CM , even though … |
| 1.3.6.1.4.1.4998.1.1.55.1.1.3 | ScalarcadCmRemoteQueryPollerStartTime | read-only | current | The value of sysUpTime in seconds when the last polling cycle started. cadCmRemoteQueryPollerStartTime is set to 0 when the CMTS is first restarted and doesn't… |
| 1.3.6.1.4.1.4998.1.1.55.1.1.4 | ScalarcadCmRemoteQueryPollerStopTime | read-only | current | The value of sysUpTime in seconds when the last polling cycle finished. cadCmRemoteQueryPollerStopTime is set to 0 when the CMTS is first restarted and doesn't… |
| 1.3.6.1.4.1.4998.1.1.55.1.1.5 | ScalarcadCmRemoteQueryPollerCommunity | read-write | current | The read community string is used for polling the CMs. Any change in the cadCmRemoteQueryPollerCommunity may not be reflected if the poller has already been en… |
| 1.3.6.1.4.1.4998.1.1.55.1.1.6 | ScalarcadCmRemoteQueryMacAddress | read-write | current | The object is used to trigger an immediate poll of a specific CM. This object always read back as a value of 0. The value of sysUpTime should be read and saved… |
| 1.3.6.1.4.1.4998.1.1.55.1.1.7 | ScalarcadCmRemoteQuerySourceIpAddrType | read-only | current | The type of internet address of cadCmRemoteQuerySourceIpAddr. |
| 1.3.6.1.4.1.4998.1.1.55.1.1.8 | ScalarcadCmRemoteQuerySourceIpAddr | read-only | current | The source IP address of the SNMP remote queries to the CMs. This value is changed from the Poller when the ifIndex of the cadSysSourceInterfaceRemoteQuery in … |
| 1.3.6.1.4.1.4998.1.1.55.1.2 | TablecadCmRemoteQueryStatusTable | not-accessible | current | This table contains the status of the cable modems that are polled by the CMTS CM Poller. The information will be overwritten when a new polling cycle starts. … |
| 1.3.6.1.4.1.4998.1.1.55.1.2.1 | RowcadCmRemoteQueryStatusEntry | not-accessible | current | A list of the cable modem's attributes that are polled by a CMTS. |
| 1.3.6.1.4.1.4998.1.1.55.1.2.1.1 | ColumncadCmRemoteQueryPollTime | read-only | current | The value of sysUpTime when this CM entry was polled. If this value is larger than the cadCmRemoteQueryPollerStopTime, it indicates that the status has already… |
| 1.3.6.1.4.1.4998.1.1.55.1.2.1.2 | ColumncadCmRemoteQueryDownChannelPower | read-only | current | The CM's received power level. This object may be set to zero if the CM does not support power level measurement. If the CM downstream interface is down, this … |
| 1.3.6.1.4.1.4998.1.1.55.1.2.1.3 | ColumncadCmRemoteQueryStatusTxPower | read-only | current | The operational transmit power for the CM upstream channel. |
| 1.3.6.1.4.1.4998.1.1.55.1.2.1.4 | ColumncadCmRemoteQueryUpChnlTxTimingOffset | read-only | current | A measure of the current round trip time. Used for timing of CM upstream transmissions to ensure synchronized arrivals at the CMTS. |
| 1.3.6.1.4.1.4998.1.1.55.1.2.1.5 | ColumncadCmRemoteQuerySigQSignalNoise | read-only | current | Signal/Noise ratio as perceived for the CM downstream channel. |
| 1.3.6.1.4.1.4998.1.1.55.1.2.1.6 | ColumncadCmRemoteQuerySigQMicroreflections | read-only | current | Total microreflections including in-channel response as perceived on the CM downstream, measured in dBc below the signal level. This object is not assumed to r… |
| 1.3.6.1.4.1.4998.1.1.55.1.2.1.7 | ColumncadCmRemoteQuerySysDescr | read-only | current | A textual description of the entity. |
| 1.3.6.1.4.1.4998.1.1.55.1.3 | NodecadCmRemoteQueryConformance | |||
| 1.3.6.1.4.1.4998.1.1.55.1.3.1 | NodecadCmRemoteQueryDocsRemoteQueryCompliances | |||
| 1.3.6.1.4.1.4998.1.1.55.1.3.1.1 | CompliancecadCmRemoteQueryDocsRemoteQueryCompliance | current | The compliance statement for entities which implement the Remote Query MIB | |
| 1.3.6.1.4.1.4998.1.1.55.1.3.2 | NodecadCmRemoteQueryDocsRemoteQueryGroups | |||
| 1.3.6.1.4.1.4998.1.1.55.1.3.2.1 | GroupcadCmRemoteQueryPollerGroup | current | Group of objects implemented in Cable Modem Termination Systems (CMTS) for configuring and monitoring the CMTS CM Poller. | |
| 1.3.6.1.4.1.4998.1.1.55.1.3.2.2 | GroupcadCmRemoteQueryStatusGroup | current | Group of objects implemented in Cable Modem Termination Systems (CMTS) for monitoring cable modems via CMTS CM Poller. |